Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux...
[sfrench/cifs-2.6.git] / include / linux / mod_devicetable.h
1 /*
2  * Device tables which are exported to userspace via
3  * scripts/mod/file2alias.c.  You must keep that file in sync with this
4  * header.
5  */
6
7 #ifndef LINUX_MOD_DEVICETABLE_H
8 #define LINUX_MOD_DEVICETABLE_H
9
10 #ifdef __KERNEL__
11 #include <linux/types.h>
12 typedef unsigned long kernel_ulong_t;
13 #endif
14
15 #define PCI_ANY_ID (~0)
16
17 struct pci_device_id {
18         __u32 vendor, device;           /* Vendor and device ID or PCI_ANY_ID*/
19         __u32 subvendor, subdevice;     /* Subsystem ID's or PCI_ANY_ID */
20         __u32 class, class_mask;        /* (class,subclass,prog-if) triplet */
21         kernel_ulong_t driver_data;     /* Data private to the driver */
22 };
23
24
25 #define IEEE1394_MATCH_VENDOR_ID        0x0001
26 #define IEEE1394_MATCH_MODEL_ID         0x0002
27 #define IEEE1394_MATCH_SPECIFIER_ID     0x0004
28 #define IEEE1394_MATCH_VERSION          0x0008
29
30 struct ieee1394_device_id {
31         __u32 match_flags;
32         __u32 vendor_id;
33         __u32 model_id;
34         __u32 specifier_id;
35         __u32 version;
36         kernel_ulong_t driver_data
37                 __attribute__((aligned(sizeof(kernel_ulong_t))));
38 };
39
40
41 /*
42  * Device table entry for "new style" table-driven USB drivers.
43  * User mode code can read these tables to choose which modules to load.
44  * Declare the table as a MODULE_DEVICE_TABLE.
45  *
46  * A probe() parameter will point to a matching entry from this table.
47  * Use the driver_info field for each match to hold information tied
48  * to that match:  device quirks, etc.
49  *
50  * Terminate the driver's table with an all-zeroes entry.
51  * Use the flag values to control which fields are compared.
52  */
53
54 /**
55  * struct usb_device_id - identifies USB devices for probing and hotplugging
56  * @match_flags: Bit mask controlling of the other fields are used to match
57  *      against new devices.  Any field except for driver_info may be used,
58  *      although some only make sense in conjunction with other fields.
59  *      This is usually set by a USB_DEVICE_*() macro, which sets all
60  *      other fields in this structure except for driver_info.
61  * @idVendor: USB vendor ID for a device; numbers are assigned
62  *      by the USB forum to its members.
63  * @idProduct: Vendor-assigned product ID.
64  * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
65  *      This is also used to identify individual product versions, for
66  *      a range consisting of a single device.
67  * @bcdDevice_hi: High end of version number range.  The range of product
68  *      versions is inclusive.
69  * @bDeviceClass: Class of device; numbers are assigned
70  *      by the USB forum.  Products may choose to implement classes,
71  *      or be vendor-specific.  Device classes specify behavior of all
72  *      the interfaces on a devices.
73  * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
74  * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
75  * @bInterfaceClass: Class of interface; numbers are assigned
76  *      by the USB forum.  Products may choose to implement classes,
77  *      or be vendor-specific.  Interface classes specify behavior only
78  *      of a given interface; other interfaces may support other classes.
79  * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
80  * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
81  * @driver_info: Holds information used by the driver.  Usually it holds
82  *      a pointer to a descriptor understood by the driver, or perhaps
83  *      device flags.
84  *
85  * In most cases, drivers will create a table of device IDs by using
86  * USB_DEVICE(), or similar macros designed for that purpose.
87  * They will then export it to userspace using MODULE_DEVICE_TABLE(),
88  * and provide it to the USB core through their usb_driver structure.
89  *
90  * See the usb_match_id() function for information about how matches are
91  * performed.  Briefly, you will normally use one of several macros to help
92  * construct these entries.  Each entry you provide will either identify
93  * one or more specific products, or will identify a class of products
94  * which have agreed to behave the same.  You should put the more specific
95  * matches towards the beginning of your table, so that driver_info can
96  * record quirks of specific products.
97  */
98 struct usb_device_id {
99         /* which fields to match against? */
100         __u16           match_flags;
101
102         /* Used for product specific matches; range is inclusive */
103         __u16           idVendor;
104         __u16           idProduct;
105         __u16           bcdDevice_lo;
106         __u16           bcdDevice_hi;
107
108         /* Used for device class matches */
109         __u8            bDeviceClass;
110         __u8            bDeviceSubClass;
111         __u8            bDeviceProtocol;
112
113         /* Used for interface class matches */
114         __u8            bInterfaceClass;
115         __u8            bInterfaceSubClass;
116         __u8            bInterfaceProtocol;
117
118         /* not matched against */
119         kernel_ulong_t  driver_info;
120 };
121
122 /* Some useful macros to use to create struct usb_device_id */
123 #define USB_DEVICE_ID_MATCH_VENDOR              0x0001
124 #define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
125 #define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
126 #define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
127 #define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
128 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
129 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
130 #define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
131 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
132 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
133
134 /* s390 CCW devices */
135 struct ccw_device_id {
136         __u16   match_flags;    /* which fields to match against */
137
138         __u16   cu_type;        /* control unit type     */
139         __u16   dev_type;       /* device type           */
140         __u8    cu_model;       /* control unit model    */
141         __u8    dev_model;      /* device model          */
142
143         kernel_ulong_t driver_info;
144 };
145
146 #define CCW_DEVICE_ID_MATCH_CU_TYPE             0x01
147 #define CCW_DEVICE_ID_MATCH_CU_MODEL            0x02
148 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE         0x04
149 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL        0x08
150
151 /* s390 AP bus devices */
152 struct ap_device_id {
153         __u16 match_flags;      /* which fields to match against */
154         __u8 dev_type;          /* device type */
155         __u8 pad1;
156         __u32 pad2;
157         kernel_ulong_t driver_info;
158 };
159
160 #define AP_DEVICE_ID_MATCH_DEVICE_TYPE          0x01
161
162
163 #define PNP_ID_LEN      8
164 #define PNP_MAX_DEVICES 8
165
166 struct pnp_device_id {
167         __u8 id[PNP_ID_LEN];
168         kernel_ulong_t driver_data;
169 };
170
171 struct pnp_card_device_id {
172         __u8 id[PNP_ID_LEN];
173         kernel_ulong_t driver_data;
174         struct {
175                 __u8 id[PNP_ID_LEN];
176         } devs[PNP_MAX_DEVICES];
177 };
178
179
180 #define SERIO_ANY       0xff
181
182 struct serio_device_id {
183         __u8 type;
184         __u8 extra;
185         __u8 id;
186         __u8 proto;
187 };
188
189 /*
190  * Struct used for matching a device
191  */
192 struct of_device_id
193 {
194         char    name[32];
195         char    type[32];
196         char    compatible[128];
197 #ifdef __KERNEL__
198         void    *data;
199 #else
200         kernel_ulong_t data;
201 #endif
202 };
203
204 /* VIO */
205 struct vio_device_id {
206         char type[32];
207         char compat[32];
208 };
209
210 /* PCMCIA */
211
212 struct pcmcia_device_id {
213         __u16           match_flags;
214
215         __u16           manf_id;
216         __u16           card_id;
217
218         __u8            func_id;
219
220         /* for real multi-function devices */
221         __u8            function;
222
223         /* for pseudo multi-function devices */
224         __u8            device_no;
225
226         __u32           prod_id_hash[4]
227                 __attribute__((aligned(sizeof(__u32))));
228
229         /* not matched against in kernelspace*/
230 #ifdef __KERNEL__
231         const char *    prod_id[4];
232 #else
233         kernel_ulong_t  prod_id[4]
234                 __attribute__((aligned(sizeof(kernel_ulong_t))));
235 #endif
236
237         /* not matched against */
238         kernel_ulong_t  driver_info;
239 #ifdef __KERNEL__
240         char *          cisfile;
241 #else
242         kernel_ulong_t  cisfile;
243 #endif
244 };
245
246 #define PCMCIA_DEV_ID_MATCH_MANF_ID     0x0001
247 #define PCMCIA_DEV_ID_MATCH_CARD_ID     0x0002
248 #define PCMCIA_DEV_ID_MATCH_FUNC_ID     0x0004
249 #define PCMCIA_DEV_ID_MATCH_FUNCTION    0x0008
250 #define PCMCIA_DEV_ID_MATCH_PROD_ID1    0x0010
251 #define PCMCIA_DEV_ID_MATCH_PROD_ID2    0x0020
252 #define PCMCIA_DEV_ID_MATCH_PROD_ID3    0x0040
253 #define PCMCIA_DEV_ID_MATCH_PROD_ID4    0x0080
254 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO   0x0100
255 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS    0x0200
256 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS   0x0400
257
258 /* I2C */
259 struct i2c_device_id {
260         __u16 id;
261 };
262
263 /* Input */
264 #define INPUT_DEVICE_ID_EV_MAX          0x1f
265 #define INPUT_DEVICE_ID_KEY_MAX         0x1ff
266 #define INPUT_DEVICE_ID_REL_MAX         0x0f
267 #define INPUT_DEVICE_ID_ABS_MAX         0x3f
268 #define INPUT_DEVICE_ID_MSC_MAX         0x07
269 #define INPUT_DEVICE_ID_LED_MAX         0x0f
270 #define INPUT_DEVICE_ID_SND_MAX         0x07
271 #define INPUT_DEVICE_ID_FF_MAX          0x7f
272 #define INPUT_DEVICE_ID_SW_MAX          0x0f
273
274 #define INPUT_DEVICE_ID_MATCH_BUS       1
275 #define INPUT_DEVICE_ID_MATCH_VENDOR    2
276 #define INPUT_DEVICE_ID_MATCH_PRODUCT   4
277 #define INPUT_DEVICE_ID_MATCH_VERSION   8
278
279 #define INPUT_DEVICE_ID_MATCH_EVBIT     0x0010
280 #define INPUT_DEVICE_ID_MATCH_KEYBIT    0x0020
281 #define INPUT_DEVICE_ID_MATCH_RELBIT    0x0040
282 #define INPUT_DEVICE_ID_MATCH_ABSBIT    0x0080
283 #define INPUT_DEVICE_ID_MATCH_MSCIT     0x0100
284 #define INPUT_DEVICE_ID_MATCH_LEDBIT    0x0200
285 #define INPUT_DEVICE_ID_MATCH_SNDBIT    0x0400
286 #define INPUT_DEVICE_ID_MATCH_FFBIT     0x0800
287 #define INPUT_DEVICE_ID_MATCH_SWBIT     0x1000
288
289 struct input_device_id {
290
291         kernel_ulong_t flags;
292
293         __u16 bustype;
294         __u16 vendor;
295         __u16 product;
296         __u16 version;
297
298         kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
299         kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
300         kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
301         kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
302         kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
303         kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
304         kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
305         kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
306         kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
307
308         kernel_ulong_t driver_info;
309 };
310
311 /* EISA */
312
313 #define EISA_SIG_LEN   8
314
315 /* The EISA signature, in ASCII form, null terminated */
316 struct eisa_device_id {
317         char          sig[EISA_SIG_LEN];
318         kernel_ulong_t driver_data;
319 };
320
321 #define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
322
323 #endif /* LINUX_MOD_DEVICETABLE_H */