ALSA: hda/realtek - Move some alc236 pintbls to fallback table
[sfrench/cifs-2.6.git] / include / linux / ethtool.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * ethtool.h: Defines for Linux ethtool.
4  *
5  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6  * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7  * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9  *                                christopher.leech@intel.com,
10  *                                scott.feldman@intel.com)
11  * Portions Copyright (C) Sun Microsystems 2008
12  */
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
15
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
19
20 #ifdef CONFIG_COMPAT
21
22 struct compat_ethtool_rx_flow_spec {
23         u32             flow_type;
24         union ethtool_flow_union h_u;
25         struct ethtool_flow_ext h_ext;
26         union ethtool_flow_union m_u;
27         struct ethtool_flow_ext m_ext;
28         compat_u64      ring_cookie;
29         u32             location;
30 };
31
32 struct compat_ethtool_rxnfc {
33         u32                             cmd;
34         u32                             flow_type;
35         compat_u64                      data;
36         struct compat_ethtool_rx_flow_spec fs;
37         u32                             rule_cnt;
38         u32                             rule_locs[0];
39 };
40
41 #endif /* CONFIG_COMPAT */
42
43 #include <linux/rculist.h>
44
45 /**
46  * enum ethtool_phys_id_state - indicator state for physical identification
47  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
50  *      is not supported)
51  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
52  *      is not supported)
53  */
54 enum ethtool_phys_id_state {
55         ETHTOOL_ID_INACTIVE,
56         ETHTOOL_ID_ACTIVE,
57         ETHTOOL_ID_ON,
58         ETHTOOL_ID_OFF
59 };
60
61 enum {
62         ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
63         ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
64         ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
65
66         /*
67          * Add your fresh new hash function bits above and remember to update
68          * rss_hash_func_strings[] in ethtool.c
69          */
70         ETH_RSS_HASH_FUNCS_COUNT
71 };
72
73 #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
74 #define __ETH_RSS_HASH(name)    __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
75
76 #define ETH_RSS_HASH_TOP        __ETH_RSS_HASH(TOP)
77 #define ETH_RSS_HASH_XOR        __ETH_RSS_HASH(XOR)
78 #define ETH_RSS_HASH_CRC32      __ETH_RSS_HASH(CRC32)
79
80 #define ETH_RSS_HASH_UNKNOWN    0
81 #define ETH_RSS_HASH_NO_CHANGE  0
82
83 struct net_device;
84
85 /* Some generic methods drivers may use in their ethtool_ops */
86 u32 ethtool_op_get_link(struct net_device *dev);
87 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
88
89 /**
90  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
91  * @index: Index in RX flow hash indirection table
92  * @n_rx_rings: Number of RX rings to use
93  *
94  * This function provides the default policy for RX flow hash indirection.
95  */
96 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
97 {
98         return index % n_rx_rings;
99 }
100
101 /* declare a link mode bitmap */
102 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)          \
103         DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
104
105 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
106  * fields, but they are allowed to overwrite them (will be ignored).
107  */
108 struct ethtool_link_ksettings {
109         struct ethtool_link_settings base;
110         struct {
111                 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
112                 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
113                 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
114         } link_modes;
115 };
116
117 /**
118  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
119  *   @ptr : pointer to struct ethtool_link_ksettings
120  *   @name : one of supported/advertising/lp_advertising
121  */
122 #define ethtool_link_ksettings_zero_link_mode(ptr, name)                \
123         bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
124
125 /**
126  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
127  * link mode mask
128  *   @ptr : pointer to struct ethtool_link_ksettings
129  *   @name : one of supported/advertising/lp_advertising
130  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
131  * (not atomic, no bound checking)
132  */
133 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)           \
134         __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
135
136 /**
137  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
138  * link mode mask
139  *   @ptr : pointer to struct ethtool_link_ksettings
140  *   @name : one of supported/advertising/lp_advertising
141  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
142  * (not atomic, no bound checking)
143  */
144 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)           \
145         __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
146
147 /**
148  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
149  *   @ptr : pointer to struct ethtool_link_ksettings
150  *   @name : one of supported/advertising/lp_advertising
151  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
152  * (not atomic, no bound checking)
153  *
154  * Returns true/false.
155  */
156 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)          \
157         test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
158
159 extern int
160 __ethtool_get_link_ksettings(struct net_device *dev,
161                              struct ethtool_link_ksettings *link_ksettings);
162
163 /**
164  * ethtool_intersect_link_masks - Given two link masks, AND them together
165  * @dst: first mask and where result is stored
166  * @src: second mask to intersect with
167  *
168  * Given two link mode masks, AND them together and save the result in dst.
169  */
170 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
171                                   struct ethtool_link_ksettings *src);
172
173 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
174                                              u32 legacy_u32);
175
176 /* return false if src had higher bits set. lower bits always updated. */
177 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
178                                      const unsigned long *src);
179
180 /**
181  * struct ethtool_ops - optional netdev operations
182  * @get_drvinfo: Report driver/device information.  Should only set the
183  *      @driver, @version, @fw_version and @bus_info fields.  If not
184  *      implemented, the @driver and @bus_info fields will be filled in
185  *      according to the netdev's parent device.
186  * @get_regs_len: Get buffer length required for @get_regs
187  * @get_regs: Get device registers
188  * @get_wol: Report whether Wake-on-Lan is enabled
189  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
190  *      or zero.
191  * @get_msglevel: Report driver message level.  This should be the value
192  *      of the @msg_enable field used by netif logging functions.
193  * @set_msglevel: Set driver message level
194  * @nway_reset: Restart autonegotiation.  Returns a negative error code
195  *      or zero.
196  * @get_link: Report whether physical link is up.  Will only be called if
197  *      the netdev is up.  Should usually be set to ethtool_op_get_link(),
198  *      which uses netif_carrier_ok().
199  * @get_eeprom: Read data from the device EEPROM.
200  *      Should fill in the magic field.  Don't need to check len for zero
201  *      or wraparound.  Fill in the data argument with the eeprom values
202  *      from offset to offset + len.  Update len to the amount read.
203  *      Returns an error or zero.
204  * @set_eeprom: Write data to the device EEPROM.
205  *      Should validate the magic field.  Don't need to check len for zero
206  *      or wraparound.  Update len to the amount written.  Returns an error
207  *      or zero.
208  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
209  *      error code or zero.
210  * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
211  *      error code or zero.
212  * @get_ringparam: Report ring sizes
213  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
214  * @get_pauseparam: Report pause parameters
215  * @set_pauseparam: Set pause parameters.  Returns a negative error code
216  *      or zero.
217  * @self_test: Run specified self-tests
218  * @get_strings: Return a set of strings that describe the requested objects
219  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
220  *      attached to it.  The implementation may update the indicator
221  *      asynchronously or synchronously, but in either case it must return
222  *      quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
223  *      and must either activate asynchronous updates and return zero, return
224  *      a negative error or return a positive frequency for synchronous
225  *      indication (e.g. 1 for one on/off cycle per second).  If it returns
226  *      a frequency then it will be called again at intervals with the
227  *      argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
228  *      the indicator accordingly.  Finally, it is called with the argument
229  *      %ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
230  *      negative error code or zero.
231  * @get_ethtool_stats: Return extended statistics about the device.
232  *      This is only useful if the device maintains statistics not
233  *      included in &struct rtnl_link_stats64.
234  * @begin: Function to be called before any other operation.  Returns a
235  *      negative error code or zero.
236  * @complete: Function to be called after any other operation except
237  *      @begin.  Will be called even if the other operation failed.
238  * @get_priv_flags: Report driver-specific feature flags.
239  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
240  *      error code or zero.
241  * @get_sset_count: Get number of strings that @get_strings will write.
242  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
243  *      error code or zero.
244  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
245  *      error code or zero.
246  * @flash_device: Write a firmware image to device's flash memory.
247  *      Returns a negative error code or zero.
248  * @reset: Reset (part of) the device, as specified by a bitmask of
249  *      flags from &enum ethtool_reset_flags.  Returns a negative
250  *      error code or zero.
251  * @get_rxfh_key_size: Get the size of the RX flow hash key.
252  *      Returns zero if not supported for this specific device.
253  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
254  *      Returns zero if not supported for this specific device.
255  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
256  *      and/or hash function.
257  *      Returns a negative error code or zero.
258  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
259  *      key, and/or hash function.  Arguments which are set to %NULL or zero
260  *      will remain unchanged.
261  *      Returns a negative error code or zero. An error code must be returned
262  *      if at least one unsupported change was requested.
263  * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
264  *      hash key, and/or hash function assiciated to the given rss context.
265  *      Returns a negative error code or zero.
266  * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
267  *      the contents of the RX flow hash indirection table, hash key, and/or
268  *      hash function associated to the given context. Arguments which are set
269  *      to %NULL or zero will remain unchanged.
270  *      Returns a negative error code or zero. An error code must be returned
271  *      if at least one unsupported change was requested.
272  * @get_channels: Get number of channels.
273  * @set_channels: Set number of channels.  Returns a negative error code or
274  *      zero.
275  * @get_dump_flag: Get dump flag indicating current dump length, version,
276  *                 and flag of the device.
277  * @get_dump_data: Get dump data.
278  * @set_dump: Set dump specific flags to the device.
279  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
280  *      Drivers supporting transmit time stamps in software should set this to
281  *      ethtool_op_get_ts_info().
282  * @get_module_info: Get the size and type of the eeprom contained within
283  *      a plug-in module.
284  * @get_module_eeprom: Get the eeprom information from the plug-in module
285  * @get_eee: Get Energy-Efficient (EEE) supported and status.
286  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
287  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
288  *      It must check that the given queue number is valid. If neither a RX nor
289  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
290  *      queue has this number, set the inapplicable fields to ~0 and return 0.
291  *      Returns a negative error code or zero.
292  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
293  *      It must check that the given queue number is valid. If neither a RX nor
294  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
295  *      queue has this number, ignore the inapplicable fields.
296  *      Returns a negative error code or zero.
297  * @get_link_ksettings: Get various device settings including Ethernet link
298  *      settings. The %cmd and %link_mode_masks_nwords fields should be
299  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
300  *      any change to them will be overwritten by kernel. Returns a negative
301  *      error code or zero.
302  * @set_link_ksettings: Set various device settings including Ethernet link
303  *      settings. The %cmd and %link_mode_masks_nwords fields should be
304  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
305  *      any change to them will be overwritten by kernel. Returns a negative
306  *      error code or zero.
307  * @get_fecparam: Get the network device Forward Error Correction parameters.
308  * @set_fecparam: Set the network device Forward Error Correction parameters.
309  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
310  *      This is only useful if the device maintains PHY statistics and
311  *      cannot use the standard PHY library helpers.
312  *
313  * All operations are optional (i.e. the function pointer may be set
314  * to %NULL) and callers must take this into account.  Callers must
315  * hold the RTNL lock.
316  *
317  * See the structures used by these operations for further documentation.
318  * Note that for all operations using a structure ending with a zero-
319  * length array, the array is allocated separately in the kernel and
320  * is passed to the driver as an additional parameter.
321  *
322  * See &struct net_device and &struct net_device_ops for documentation
323  * of the generic netdev features interface.
324  */
325 struct ethtool_ops {
326         void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
327         int     (*get_regs_len)(struct net_device *);
328         void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
329         void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
330         int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
331         u32     (*get_msglevel)(struct net_device *);
332         void    (*set_msglevel)(struct net_device *, u32);
333         int     (*nway_reset)(struct net_device *);
334         u32     (*get_link)(struct net_device *);
335         int     (*get_eeprom_len)(struct net_device *);
336         int     (*get_eeprom)(struct net_device *,
337                               struct ethtool_eeprom *, u8 *);
338         int     (*set_eeprom)(struct net_device *,
339                               struct ethtool_eeprom *, u8 *);
340         int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
341         int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
342         void    (*get_ringparam)(struct net_device *,
343                                  struct ethtool_ringparam *);
344         int     (*set_ringparam)(struct net_device *,
345                                  struct ethtool_ringparam *);
346         void    (*get_pauseparam)(struct net_device *,
347                                   struct ethtool_pauseparam*);
348         int     (*set_pauseparam)(struct net_device *,
349                                   struct ethtool_pauseparam*);
350         void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
351         void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
352         int     (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
353         void    (*get_ethtool_stats)(struct net_device *,
354                                      struct ethtool_stats *, u64 *);
355         int     (*begin)(struct net_device *);
356         void    (*complete)(struct net_device *);
357         u32     (*get_priv_flags)(struct net_device *);
358         int     (*set_priv_flags)(struct net_device *, u32);
359         int     (*get_sset_count)(struct net_device *, int);
360         int     (*get_rxnfc)(struct net_device *,
361                              struct ethtool_rxnfc *, u32 *rule_locs);
362         int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
363         int     (*flash_device)(struct net_device *, struct ethtool_flash *);
364         int     (*reset)(struct net_device *, u32 *);
365         u32     (*get_rxfh_key_size)(struct net_device *);
366         u32     (*get_rxfh_indir_size)(struct net_device *);
367         int     (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
368                             u8 *hfunc);
369         int     (*set_rxfh)(struct net_device *, const u32 *indir,
370                             const u8 *key, const u8 hfunc);
371         int     (*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
372                                     u8 *hfunc, u32 rss_context);
373         int     (*set_rxfh_context)(struct net_device *, const u32 *indir,
374                                     const u8 *key, const u8 hfunc,
375                                     u32 *rss_context, bool delete);
376         void    (*get_channels)(struct net_device *, struct ethtool_channels *);
377         int     (*set_channels)(struct net_device *, struct ethtool_channels *);
378         int     (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
379         int     (*get_dump_data)(struct net_device *,
380                                  struct ethtool_dump *, void *);
381         int     (*set_dump)(struct net_device *, struct ethtool_dump *);
382         int     (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
383         int     (*get_module_info)(struct net_device *,
384                                    struct ethtool_modinfo *);
385         int     (*get_module_eeprom)(struct net_device *,
386                                      struct ethtool_eeprom *, u8 *);
387         int     (*get_eee)(struct net_device *, struct ethtool_eee *);
388         int     (*set_eee)(struct net_device *, struct ethtool_eee *);
389         int     (*get_tunable)(struct net_device *,
390                                const struct ethtool_tunable *, void *);
391         int     (*set_tunable)(struct net_device *,
392                                const struct ethtool_tunable *, const void *);
393         int     (*get_per_queue_coalesce)(struct net_device *, u32,
394                                           struct ethtool_coalesce *);
395         int     (*set_per_queue_coalesce)(struct net_device *, u32,
396                                           struct ethtool_coalesce *);
397         int     (*get_link_ksettings)(struct net_device *,
398                                       struct ethtool_link_ksettings *);
399         int     (*set_link_ksettings)(struct net_device *,
400                                       const struct ethtool_link_ksettings *);
401         int     (*get_fecparam)(struct net_device *,
402                                       struct ethtool_fecparam *);
403         int     (*set_fecparam)(struct net_device *,
404                                       struct ethtool_fecparam *);
405         void    (*get_ethtool_phy_stats)(struct net_device *,
406                                          struct ethtool_stats *, u64 *);
407 };
408
409 struct ethtool_rx_flow_rule {
410         struct flow_rule        *rule;
411         unsigned long           priv[0];
412 };
413
414 struct ethtool_rx_flow_spec_input {
415         const struct ethtool_rx_flow_spec       *fs;
416         u32                                     rss_ctx;
417 };
418
419 struct ethtool_rx_flow_rule *
420 ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
421 void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
422
423 #endif /* _LINUX_ETHTOOL_H */