Linux 6.9-rc5

[sfrench/cifs-2.6.git] / include / linux / crypto.h

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Scatterlist Cryptographic API.
 *
 * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
 * Copyright (c) 2002 David S. Miller (davem@redhat.com)
 * Copyright (c) 2005 Herbert Xu <herbert@gondor.apana.org.au>
 *
 * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
 * and Nettle, by Niels Möller.
 */
#ifndef _LINUX_CRYPTO_H
#define _LINUX_CRYPTO_H

#include <linux/completion.h>
#include <linux/refcount.h>
#include <linux/slab.h>
#include <linux/types.h>

/*
 * Algorithm masks and types.
 */
#define CRYPTO_ALG_TYPE_MASK            0x0000000f
#define CRYPTO_ALG_TYPE_CIPHER          0x00000001
#define CRYPTO_ALG_TYPE_COMPRESS        0x00000002
#define CRYPTO_ALG_TYPE_AEAD            0x00000003
#define CRYPTO_ALG_TYPE_LSKCIPHER       0x00000004
#define CRYPTO_ALG_TYPE_SKCIPHER        0x00000005
#define CRYPTO_ALG_TYPE_AKCIPHER        0x00000006
#define CRYPTO_ALG_TYPE_SIG             0x00000007
#define CRYPTO_ALG_TYPE_KPP             0x00000008
#define CRYPTO_ALG_TYPE_ACOMPRESS       0x0000000a
#define CRYPTO_ALG_TYPE_SCOMPRESS       0x0000000b
#define CRYPTO_ALG_TYPE_RNG             0x0000000c
#define CRYPTO_ALG_TYPE_HASH            0x0000000e
#define CRYPTO_ALG_TYPE_SHASH           0x0000000e
#define CRYPTO_ALG_TYPE_AHASH           0x0000000f

#define CRYPTO_ALG_TYPE_ACOMPRESS_MASK  0x0000000e

#define CRYPTO_ALG_LARVAL               0x00000010
#define CRYPTO_ALG_DEAD                 0x00000020
#define CRYPTO_ALG_DYING                0x00000040
#define CRYPTO_ALG_ASYNC                0x00000080

/*
 * Set if the algorithm (or an algorithm which it uses) requires another
 * algorithm of the same type to handle corner cases.
 */
#define CRYPTO_ALG_NEED_FALLBACK        0x00000100

/*
 * Set if the algorithm has passed automated run-time testing.  Note that
 * if there is no run-time testing for a given algorithm it is considered
 * to have passed.
 */

#define CRYPTO_ALG_TESTED               0x00000400

/*
 * Set if the algorithm is an instance that is built from templates.
 */
#define CRYPTO_ALG_INSTANCE             0x00000800

/* Set this bit if the algorithm provided is hardware accelerated but
 * not available to userspace via instruction set or so.
 */
#define CRYPTO_ALG_KERN_DRIVER_ONLY     0x00001000

/*
 * Mark a cipher as a service implementation only usable by another
 * cipher and never by a normal user of the kernel crypto API
 */
#define CRYPTO_ALG_INTERNAL             0x00002000

/*
 * Set if the algorithm has a ->setkey() method but can be used without
 * calling it first, i.e. there is a default key.
 */
#define CRYPTO_ALG_OPTIONAL_KEY         0x00004000

/*
 * Don't trigger module loading
 */
#define CRYPTO_NOLOAD                   0x00008000

/*
 * The algorithm may allocate memory during request processing, i.e. during
 * encryption, decryption, or hashing.  Users can request an algorithm with this
 * flag unset if they can't handle memory allocation failures.
 *
 * This flag is currently only implemented for algorithms of type "skcipher",
 * "aead", "ahash", "shash", and "cipher".  Algorithms of other types might not
 * have this flag set even if they allocate memory.
 *
 * In some edge cases, algorithms can allocate memory regardless of this flag.
 * To avoid these cases, users must obey the following usage constraints:
 *    skcipher:
 *      - The IV buffer and all scatterlist elements must be aligned to the
 *        algorithm's alignmask.
 *      - If the data were to be divided into chunks of size
 *        crypto_skcipher_walksize() (with any remainder going at the end), no
 *        chunk can cross a page boundary or a scatterlist element boundary.
 *    aead:
 *      - The IV buffer and all scatterlist elements must be aligned to the
 *        algorithm's alignmask.
 *      - The first scatterlist element must contain all the associated data,
 *        and its pages must be !PageHighMem.
 *      - If the plaintext/ciphertext were to be divided into chunks of size
 *        crypto_aead_walksize() (with the remainder going at the end), no chunk
 *        can cross a page boundary or a scatterlist element boundary.
 *    ahash:
 *      - crypto_ahash_finup() must not be used unless the algorithm implements
 *        ->finup() natively.
 */
#define CRYPTO_ALG_ALLOCATES_MEMORY     0x00010000

/*
 * Mark an algorithm as a service implementation only usable by a
 * template and never by a normal user of the kernel crypto API.
 * This is intended to be used by algorithms that are themselves
 * not FIPS-approved but may instead be used to implement parts of
 * a FIPS-approved algorithm (e.g., dh vs. ffdhe2048(dh)).
 */
#define CRYPTO_ALG_FIPS_INTERNAL        0x00020000

/*
 * Transform masks and values (for crt_flags).
 */
#define CRYPTO_TFM_NEED_KEY             0x00000001

#define CRYPTO_TFM_REQ_MASK             0x000fff00
#define CRYPTO_TFM_REQ_FORBID_WEAK_KEYS 0x00000100
#define CRYPTO_TFM_REQ_MAY_SLEEP        0x00000200
#define CRYPTO_TFM_REQ_MAY_BACKLOG      0x00000400

/*
 * Miscellaneous stuff.
 */
#define CRYPTO_MAX_ALG_NAME             128

/*
 * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
 * declaration) is used to ensure that the crypto_tfm context structure is
 * aligned correctly for the given architecture so that there are no alignment
 * faults for C data types.  On architectures that support non-cache coherent
 * DMA, such as ARM or arm64, it also takes into account the minimal alignment
 * that is required to ensure that the context struct member does not share any
 * cachelines with the rest of the struct. This is needed to ensure that cache
 * maintenance for non-coherent DMA (cache invalidation in particular) does not
 * affect data that may be accessed by the CPU concurrently.
 */
#define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN

#define CRYPTO_MINALIGN_ATTR __attribute__ ((__aligned__(CRYPTO_MINALIGN)))

struct crypto_tfm;
struct crypto_type;
struct module;

typedef void (*crypto_completion_t)(void *req, int err);

/**
 * DOC: Block Cipher Context Data Structures
 *
 * These data structures define the operating context for each block cipher
 * type.
 */

struct crypto_async_request {
        struct list_head list;
        crypto_completion_t complete;
        void *data;
        struct crypto_tfm *tfm;

        u32 flags;
};

/**
 * DOC: Block Cipher Algorithm Definitions
 *
 * These data structures define modular crypto algorithm implementations,
 * managed via crypto_register_alg() and crypto_unregister_alg().
 */

/**
 * struct cipher_alg - single-block symmetric ciphers definition
 * @cia_min_keysize: Minimum key size supported by the transformation. This is
 *                   the smallest key length supported by this transformation
 *                   algorithm. This must be set to one of the pre-defined
 *                   values as this is not hardware specific. Possible values
 *                   for this field can be found via git grep "_MIN_KEY_SIZE"
 *                   include/crypto/
 * @cia_max_keysize: Maximum key size supported by the transformation. This is
 *                  the largest key length supported by this transformation
 *                  algorithm. This must be set to one of the pre-defined values
 *                  as this is not hardware specific. Possible values for this
 *                  field can be found via git grep "_MAX_KEY_SIZE"
 *                  include/crypto/
 * @cia_setkey: Set key for the transformation. This function is used to either
 *              program a supplied key into the hardware or store the key in the
 *              transformation context for programming it later. Note that this
 *              function does modify the transformation context. This function
 *              can be called multiple times during the existence of the
 *              transformation object, so one must make sure the key is properly
 *              reprogrammed into the hardware. This function is also
 *              responsible for checking the key length for validity.
 * @cia_encrypt: Encrypt a single block. This function is used to encrypt a
 *               single block of data, which must be @cra_blocksize big. This
 *               always operates on a full @cra_blocksize and it is not possible
 *               to encrypt a block of smaller size. The supplied buffers must
 *               therefore also be at least of @cra_blocksize size. Both the
 *               input and output buffers are always aligned to @cra_alignmask.
 *               In case either of the input or output buffer supplied by user
 *               of the crypto API is not aligned to @cra_alignmask, the crypto
 *               API will re-align the buffers. The re-alignment means that a
 *               new buffer will be allocated, the data will be copied into the
 *               new buffer, then the processing will happen on the new buffer,
 *               then the data will be copied back into the original buffer and
 *               finally the new buffer will be freed. In case a software
 *               fallback was put in place in the @cra_init call, this function
 *               might need to use the fallback if the algorithm doesn't support
 *               all of the key sizes. In case the key was stored in
 *               transformation context, the key might need to be re-programmed
 *               into the hardware in this function. This function shall not
 *               modify the transformation context, as this function may be
 *               called in parallel with the same transformation object.
 * @cia_decrypt: Decrypt a single block. This is a reverse counterpart to
 *               @cia_encrypt, and the conditions are exactly the same.
 *
 * All fields are mandatory and must be filled.
 */
struct cipher_alg {
        unsigned int cia_min_keysize;
        unsigned int cia_max_keysize;
        int (*cia_setkey)(struct crypto_tfm *tfm, const u8 *key,
                          unsigned int keylen);
        void (*cia_encrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
        void (*cia_decrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
};

/**
 * struct compress_alg - compression/decompression algorithm
 * @coa_compress: Compress a buffer of specified length, storing the resulting
 *                data in the specified buffer. Return the length of the
 *                compressed data in dlen.
 * @coa_decompress: Decompress the source buffer, storing the uncompressed
 *                  data in the specified buffer. The length of the data is
 *                  returned in dlen.
 *
 * All fields are mandatory.
 */
struct compress_alg {
        int (*coa_compress)(struct crypto_tfm *tfm, const u8 *src,
                            unsigned int slen, u8 *dst, unsigned int *dlen);
        int (*coa_decompress)(struct crypto_tfm *tfm, const u8 *src,
                              unsigned int slen, u8 *dst, unsigned int *dlen);
};

#define cra_cipher      cra_u.cipher
#define cra_compress    cra_u.compress

/**
 * struct crypto_alg - definition of a cryptograpic cipher algorithm
 * @cra_flags: Flags describing this transformation. See include/linux/crypto.h
 *             CRYPTO_ALG_* flags for the flags which go in here. Those are
 *             used for fine-tuning the description of the transformation
 *             algorithm.
 * @cra_blocksize: Minimum block size of this transformation. The size in bytes
 *                 of the smallest possible unit which can be transformed with
 *                 this algorithm. The users must respect this value.
 *                 In case of HASH transformation, it is possible for a smaller
 *                 block than @cra_blocksize to be passed to the crypto API for
 *                 transformation, in case of any other transformation type, an
 *                 error will be returned upon any attempt to transform smaller
 *                 than @cra_blocksize chunks.
 * @cra_ctxsize: Size of the operational context of the transformation. This
 *               value informs the kernel crypto API about the memory size
 *               needed to be allocated for the transformation context.
 * @cra_alignmask: For cipher, skcipher, lskcipher, and aead algorithms this is
 *                 1 less than the alignment, in bytes, that the algorithm
 *                 implementation requires for input and output buffers.  When
 *                 the crypto API is invoked with buffers that are not aligned
 *                 to this alignment, the crypto API automatically utilizes
 *                 appropriately aligned temporary buffers to comply with what
 *                 the algorithm needs.  (For scatterlists this happens only if
 *                 the algorithm uses the skcipher_walk helper functions.)  This
 *                 misalignment handling carries a performance penalty, so it is
 *                 preferred that algorithms do not set a nonzero alignmask.
 *                 Also, crypto API users may wish to allocate buffers aligned
 *                 to the alignmask of the algorithm being used, in order to
 *                 avoid the API having to realign them.  Note: the alignmask is
 *                 not supported for hash algorithms and is always 0 for them.
 * @cra_priority: Priority of this transformation implementation. In case
 *                multiple transformations with same @cra_name are available to
 *                the Crypto API, the kernel will use the one with highest
 *                @cra_priority.
 * @cra_name: Generic name (usable by multiple implementations) of the
 *            transformation algorithm. This is the name of the transformation
 *            itself. This field is used by the kernel when looking up the
 *            providers of particular transformation.
 * @cra_driver_name: Unique name of the transformation provider. This is the
 *                   name of the provider of the transformation. This can be any
 *                   arbitrary value, but in the usual case, this contains the
 *                   name of the chip or provider and the name of the
 *                   transformation algorithm.
 * @cra_type: Type of the cryptographic transformation. This is a pointer to
 *            struct crypto_type, which implements callbacks common for all
 *            transformation types. There are multiple options, such as
 *            &crypto_skcipher_type, &crypto_ahash_type, &crypto_rng_type.
 *            This field might be empty. In that case, there are no common
 *            callbacks. This is the case for: cipher, compress, shash.
 * @cra_u: Callbacks implementing the transformation. This is a union of
 *         multiple structures. Depending on the type of transformation selected
 *         by @cra_type and @cra_flags above, the associated structure must be
 *         filled with callbacks. This field might be empty. This is the case
 *         for ahash, shash.
 * @cra_init: Initialize the cryptographic transformation object. This function
 *            is used to initialize the cryptographic transformation object.
 *            This function is called only once at the instantiation time, right
 *            after the transformation context was allocated. In case the
 *            cryptographic hardware has some special requirements which need to
 *            be handled by software, this function shall check for the precise
 *            requirement of the transformation and put any software fallbacks
 *            in place.
 * @cra_exit: Deinitialize the cryptographic transformation object. This is a
 *            counterpart to @cra_init, used to remove various changes set in
 *            @cra_init.
 * @cra_u.cipher: Union member which contains a single-block symmetric cipher
 *                definition. See @struct @cipher_alg.
 * @cra_u.compress: Union member which contains a (de)compression algorithm.
 *                  See @struct @compress_alg.
 * @cra_module: Owner of this transformation implementation. Set to THIS_MODULE
 * @cra_list: internally used
 * @cra_users: internally used
 * @cra_refcnt: internally used
 * @cra_destroy: internally used
 *
 * The struct crypto_alg describes a generic Crypto API algorithm and is common
 * for all of the transformations. Any variable not documented here shall not
 * be used by a cipher implementation as it is internal to the Crypto API.
 */
struct crypto_alg {
        struct list_head cra_list;
        struct list_head cra_users;

        u32 cra_flags;
        unsigned int cra_blocksize;
        unsigned int cra_ctxsize;
        unsigned int cra_alignmask;

        int cra_priority;
        refcount_t cra_refcnt;

        char cra_name[CRYPTO_MAX_ALG_NAME];
        char cra_driver_name[CRYPTO_MAX_ALG_NAME];

        const struct crypto_type *cra_type;

        union {
                struct cipher_alg cipher;
                struct compress_alg compress;
        } cra_u;

        int (*cra_init)(struct crypto_tfm *tfm);
        void (*cra_exit)(struct crypto_tfm *tfm);
        void (*cra_destroy)(struct crypto_alg *alg);
        
        struct module *cra_module;
} CRYPTO_MINALIGN_ATTR;

/*
 * A helper struct for waiting for completion of async crypto ops
 */
struct crypto_wait {
        struct completion completion;
        int err;
};

/*
 * Macro for declaring a crypto op async wait object on stack
 */
#define DECLARE_CRYPTO_WAIT(_wait) \
        struct crypto_wait _wait = { \
                COMPLETION_INITIALIZER_ONSTACK((_wait).completion), 0 }

/*
 * Async ops completion helper functioons
 */
void crypto_req_done(void *req, int err);

static inline int crypto_wait_req(int err, struct crypto_wait *wait)
{
        switch (err) {
        case -EINPROGRESS:
        case -EBUSY:
                wait_for_completion(&wait->completion);
                reinit_completion(&wait->completion);
                err = wait->err;
                break;
        }

        return err;
}

static inline void crypto_init_wait(struct crypto_wait *wait)
{
        init_completion(&wait->completion);
}

/*
 * Algorithm query interface.
 */
int crypto_has_alg(const char *name, u32 type, u32 mask);

/*
 * Transforms: user-instantiated objects which encapsulate algorithms
 * and core processing logic.  Managed via crypto_alloc_*() and
 * crypto_free_*(), as well as the various helpers below.
 */

struct crypto_tfm {
        refcount_t refcnt;

        u32 crt_flags;

        int node;
        
        void (*exit)(struct crypto_tfm *tfm);
        
        struct crypto_alg *__crt_alg;

        void *__crt_ctx[] CRYPTO_MINALIGN_ATTR;
};

struct crypto_comp {
        struct crypto_tfm base;
};

/* 
 * Transform user interface.
 */
 
struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask);
void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm);

static inline void crypto_free_tfm(struct crypto_tfm *tfm)
{
        return crypto_destroy_tfm(tfm, tfm);
}

/*
 * Transform helpers which query the underlying algorithm.
 */
static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm)
{
        return tfm->__crt_alg->cra_name;
}

static inline const char *crypto_tfm_alg_driver_name(struct crypto_tfm *tfm)
{
        return tfm->__crt_alg->cra_driver_name;
}

static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm)
{
        return tfm->__crt_alg->cra_blocksize;
}

static inline unsigned int crypto_tfm_alg_alignmask(struct crypto_tfm *tfm)
{
        return tfm->__crt_alg->cra_alignmask;
}

static inline u32 crypto_tfm_get_flags(struct crypto_tfm *tfm)
{
        return tfm->crt_flags;
}

static inline void crypto_tfm_set_flags(struct crypto_tfm *tfm, u32 flags)
{
        tfm->crt_flags |= flags;
}

static inline void crypto_tfm_clear_flags(struct crypto_tfm *tfm, u32 flags)
{
        tfm->crt_flags &= ~flags;
}

static inline unsigned int crypto_tfm_ctx_alignment(void)
{
        struct crypto_tfm *tfm;
        return __alignof__(tfm->__crt_ctx);
}

static inline struct crypto_comp *__crypto_comp_cast(struct crypto_tfm *tfm)
{
        return (struct crypto_comp *)tfm;
}

static inline struct crypto_comp *crypto_alloc_comp(const char *alg_name,
                                                    u32 type, u32 mask)
{
        type &= ~CRYPTO_ALG_TYPE_MASK;
        type |= CRYPTO_ALG_TYPE_COMPRESS;
        mask |= CRYPTO_ALG_TYPE_MASK;

        return __crypto_comp_cast(crypto_alloc_base(alg_name, type, mask));
}

static inline struct crypto_tfm *crypto_comp_tfm(struct crypto_comp *tfm)
{
        return &tfm->base;
}

static inline void crypto_free_comp(struct crypto_comp *tfm)
{
        crypto_free_tfm(crypto_comp_tfm(tfm));
}

static inline int crypto_has_comp(const char *alg_name, u32 type, u32 mask)
{
        type &= ~CRYPTO_ALG_TYPE_MASK;
        type |= CRYPTO_ALG_TYPE_COMPRESS;
        mask |= CRYPTO_ALG_TYPE_MASK;

        return crypto_has_alg(alg_name, type, mask);
}

static inline const char *crypto_comp_name(struct crypto_comp *tfm)
{
        return crypto_tfm_alg_name(crypto_comp_tfm(tfm));
}

int crypto_comp_compress(struct crypto_comp *tfm,
                         const u8 *src, unsigned int slen,
                         u8 *dst, unsigned int *dlen);

int crypto_comp_decompress(struct crypto_comp *tfm,
                           const u8 *src, unsigned int slen,
                           u8 *dst, unsigned int *dlen);

#endif  /* _LINUX_CRYPTO_H */