i386/x86_64: move headers to include/asm-x86
[sfrench/cifs-2.6.git] / include / asm-x86 / spinlock_32.h
1 #ifndef __ASM_SPINLOCK_H
2 #define __ASM_SPINLOCK_H
3
4 #include <asm/atomic.h>
5 #include <asm/rwlock.h>
6 #include <asm/page.h>
7 #include <asm/processor.h>
8 #include <linux/compiler.h>
9
10 #ifdef CONFIG_PARAVIRT
11 #include <asm/paravirt.h>
12 #else
13 #define CLI_STRING      "cli"
14 #define STI_STRING      "sti"
15 #define CLI_STI_CLOBBERS
16 #define CLI_STI_INPUT_ARGS
17 #endif /* CONFIG_PARAVIRT */
18
19 /*
20  * Your basic SMP spinlocks, allowing only a single CPU anywhere
21  *
22  * Simple spin lock operations.  There are two variants, one clears IRQ's
23  * on the local processor, one does not.
24  *
25  * We make no fairness assumptions. They have a cost.
26  *
27  * (the type definitions are in asm/spinlock_types.h)
28  */
29
30 static inline int __raw_spin_is_locked(raw_spinlock_t *x)
31 {
32         return *(volatile signed char *)(&(x)->slock) <= 0;
33 }
34
35 static inline void __raw_spin_lock(raw_spinlock_t *lock)
36 {
37         asm volatile("\n1:\t"
38                      LOCK_PREFIX " ; decb %0\n\t"
39                      "jns 3f\n"
40                      "2:\t"
41                      "rep;nop\n\t"
42                      "cmpb $0,%0\n\t"
43                      "jle 2b\n\t"
44                      "jmp 1b\n"
45                      "3:\n\t"
46                      : "+m" (lock->slock) : : "memory");
47 }
48
49 /*
50  * It is easier for the lock validator if interrupts are not re-enabled
51  * in the middle of a lock-acquire. This is a performance feature anyway
52  * so we turn it off:
53  *
54  * NOTE: there's an irqs-on section here, which normally would have to be
55  * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant.
56  */
57 #ifndef CONFIG_PROVE_LOCKING
58 static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
59 {
60         asm volatile(
61                 "\n1:\t"
62                 LOCK_PREFIX " ; decb %[slock]\n\t"
63                 "jns 5f\n"
64                 "2:\t"
65                 "testl $0x200, %[flags]\n\t"
66                 "jz 4f\n\t"
67                 STI_STRING "\n"
68                 "3:\t"
69                 "rep;nop\n\t"
70                 "cmpb $0, %[slock]\n\t"
71                 "jle 3b\n\t"
72                 CLI_STRING "\n\t"
73                 "jmp 1b\n"
74                 "4:\t"
75                 "rep;nop\n\t"
76                 "cmpb $0, %[slock]\n\t"
77                 "jg 1b\n\t"
78                 "jmp 4b\n"
79                 "5:\n\t"
80                 : [slock] "+m" (lock->slock)
81                 : [flags] "r" (flags)
82                   CLI_STI_INPUT_ARGS
83                 : "memory" CLI_STI_CLOBBERS);
84 }
85 #endif
86
87 static inline int __raw_spin_trylock(raw_spinlock_t *lock)
88 {
89         char oldval;
90         asm volatile(
91                 "xchgb %b0,%1"
92                 :"=q" (oldval), "+m" (lock->slock)
93                 :"0" (0) : "memory");
94         return oldval > 0;
95 }
96
97 /*
98  * __raw_spin_unlock based on writing $1 to the low byte.
99  * This method works. Despite all the confusion.
100  * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there)
101  * (PPro errata 66, 92)
102  */
103
104 #if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
105
106 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
107 {
108         asm volatile("movb $1,%0" : "+m" (lock->slock) :: "memory");
109 }
110
111 #else
112
113 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
114 {
115         char oldval = 1;
116
117         asm volatile("xchgb %b0, %1"
118                      : "=q" (oldval), "+m" (lock->slock)
119                      : "0" (oldval) : "memory");
120 }
121
122 #endif
123
124 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
125 {
126         while (__raw_spin_is_locked(lock))
127                 cpu_relax();
128 }
129
130 /*
131  * Read-write spinlocks, allowing multiple readers
132  * but only one writer.
133  *
134  * NOTE! it is quite common to have readers in interrupts
135  * but no interrupt writers. For those circumstances we
136  * can "mix" irq-safe locks - any writer needs to get a
137  * irq-safe write-lock, but readers can get non-irqsafe
138  * read-locks.
139  *
140  * On x86, we implement read-write locks as a 32-bit counter
141  * with the high bit (sign) being the "contended" bit.
142  *
143  * The inline assembly is non-obvious. Think about it.
144  *
145  * Changed to use the same technique as rw semaphores.  See
146  * semaphore.h for details.  -ben
147  *
148  * the helpers are in arch/i386/kernel/semaphore.c
149  */
150
151 /**
152  * read_can_lock - would read_trylock() succeed?
153  * @lock: the rwlock in question.
154  */
155 static inline int __raw_read_can_lock(raw_rwlock_t *x)
156 {
157         return (int)(x)->lock > 0;
158 }
159
160 /**
161  * write_can_lock - would write_trylock() succeed?
162  * @lock: the rwlock in question.
163  */
164 static inline int __raw_write_can_lock(raw_rwlock_t *x)
165 {
166         return (x)->lock == RW_LOCK_BIAS;
167 }
168
169 static inline void __raw_read_lock(raw_rwlock_t *rw)
170 {
171         asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
172                      "jns 1f\n"
173                      "call __read_lock_failed\n\t"
174                      "1:\n"
175                      ::"a" (rw) : "memory");
176 }
177
178 static inline void __raw_write_lock(raw_rwlock_t *rw)
179 {
180         asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t"
181                      "jz 1f\n"
182                      "call __write_lock_failed\n\t"
183                      "1:\n"
184                      ::"a" (rw) : "memory");
185 }
186
187 static inline int __raw_read_trylock(raw_rwlock_t *lock)
188 {
189         atomic_t *count = (atomic_t *)lock;
190         atomic_dec(count);
191         if (atomic_read(count) >= 0)
192                 return 1;
193         atomic_inc(count);
194         return 0;
195 }
196
197 static inline int __raw_write_trylock(raw_rwlock_t *lock)
198 {
199         atomic_t *count = (atomic_t *)lock;
200         if (atomic_sub_and_test(RW_LOCK_BIAS, count))
201                 return 1;
202         atomic_add(RW_LOCK_BIAS, count);
203         return 0;
204 }
205
206 static inline void __raw_read_unlock(raw_rwlock_t *rw)
207 {
208         asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
209 }
210
211 static inline void __raw_write_unlock(raw_rwlock_t *rw)
212 {
213         asm volatile(LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ", %0"
214                                  : "+m" (rw->lock) : : "memory");
215 }
216
217 #define _raw_spin_relax(lock)   cpu_relax()
218 #define _raw_read_relax(lock)   cpu_relax()
219 #define _raw_write_relax(lock)  cpu_relax()
220
221 #endif /* __ASM_SPINLOCK_H */