x86: move switch_to macro to system.h
[sfrench/cifs-2.6.git] / include / asm-x86 / numaq.h
1 /*
2  * Written by: Patricia Gaughen, IBM Corporation
3  *
4  * Copyright (C) 2002, IBM Corp.
5  *
6  * All rights reserved.          
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
16  * NON INFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  *
23  * Send feedback to <gone@us.ibm.com>
24  */
25
26 #ifndef NUMAQ_H
27 #define NUMAQ_H
28
29 #ifdef CONFIG_X86_NUMAQ
30
31 extern int get_memcfg_numaq(void);
32
33 /*
34  * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
35  */
36 #define SYS_CFG_DATA_PRIV_ADDR          0x0009d000 /* place for scd in private quad space */
37
38 /*
39  * Communication area for each processor on lynxer-processor tests.
40  *
41  * NOTE: If you change the size of this eachproc structure you need
42  *       to change the definition for EACH_QUAD_SIZE.
43  */
44 struct eachquadmem {
45         unsigned int    priv_mem_start;         /* Starting address of this */
46                                                 /* quad's private memory. */
47                                                 /* This is always 0. */
48                                                 /* In MB. */
49         unsigned int    priv_mem_size;          /* Size of this quad's */
50                                                 /* private memory. */
51                                                 /* In MB. */
52         unsigned int    low_shrd_mem_strp_start;/* Starting address of this */
53                                                 /* quad's low shared block */
54                                                 /* (untranslated). */
55                                                 /* In MB. */
56         unsigned int    low_shrd_mem_start;     /* Starting address of this */
57                                                 /* quad's low shared memory */
58                                                 /* (untranslated). */
59                                                 /* In MB. */
60         unsigned int    low_shrd_mem_size;      /* Size of this quad's low */
61                                                 /* shared memory. */
62                                                 /* In MB. */
63         unsigned int    lmmio_copb_start;       /* Starting address of this */
64                                                 /* quad's local memory */
65                                                 /* mapped I/O in the */
66                                                 /* compatibility OPB. */
67                                                 /* In MB. */
68         unsigned int    lmmio_copb_size;        /* Size of this quad's local */
69                                                 /* memory mapped I/O in the */
70                                                 /* compatibility OPB. */
71                                                 /* In MB. */
72         unsigned int    lmmio_nopb_start;       /* Starting address of this */
73                                                 /* quad's local memory */
74                                                 /* mapped I/O in the */
75                                                 /* non-compatibility OPB. */
76                                                 /* In MB. */
77         unsigned int    lmmio_nopb_size;        /* Size of this quad's local */
78                                                 /* memory mapped I/O in the */
79                                                 /* non-compatibility OPB. */
80                                                 /* In MB. */
81         unsigned int    io_apic_0_start;        /* Starting address of I/O */
82                                                 /* APIC 0. */
83         unsigned int    io_apic_0_sz;           /* Size I/O APIC 0. */
84         unsigned int    io_apic_1_start;        /* Starting address of I/O */
85                                                 /* APIC 1. */
86         unsigned int    io_apic_1_sz;           /* Size I/O APIC 1. */
87         unsigned int    hi_shrd_mem_start;      /* Starting address of this */
88                                                 /* quad's high shared memory.*/
89                                                 /* In MB. */
90         unsigned int    hi_shrd_mem_size;       /* Size of this quad's high */
91                                                 /* shared memory. */
92                                                 /* In MB. */
93         unsigned int    mps_table_addr;         /* Address of this quad's */
94                                                 /* MPS tables from BIOS, */
95                                                 /* in system space.*/
96         unsigned int    lcl_MDC_pio_addr;       /* Port-I/O address for */
97                                                 /* local access of MDC. */
98         unsigned int    rmt_MDC_mmpio_addr;     /* MM-Port-I/O address for */
99                                                 /* remote access of MDC. */
100         unsigned int    mm_port_io_start;       /* Starting address of this */
101                                                 /* quad's memory mapped Port */
102                                                 /* I/O space. */
103         unsigned int    mm_port_io_size;        /* Size of this quad's memory*/
104                                                 /* mapped Port I/O space. */
105         unsigned int    mm_rmt_io_apic_start;   /* Starting address of this */
106                                                 /* quad's memory mapped */
107                                                 /* remote I/O APIC space. */
108         unsigned int    mm_rmt_io_apic_size;    /* Size of this quad's memory*/
109                                                 /* mapped remote I/O APIC */
110                                                 /* space. */
111         unsigned int    mm_isa_start;           /* Starting address of this */
112                                                 /* quad's memory mapped ISA */
113                                                 /* space (contains MDC */
114                                                 /* memory space). */
115         unsigned int    mm_isa_size;            /* Size of this quad's memory*/
116                                                 /* mapped ISA space (contains*/
117                                                 /* MDC memory space). */
118         unsigned int    rmt_qmi_addr;           /* Remote addr to access QMI.*/
119         unsigned int    lcl_qmi_addr;           /* Local addr to access QMI. */
120 };
121
122 /*
123  * Note: This structure must be NOT be changed unless the multiproc and
124  * OS are changed to reflect the new structure.
125  */
126 struct sys_cfg_data {
127         unsigned int    quad_id;
128         unsigned int    bsp_proc_id; /* Boot Strap Processor in this quad. */
129         unsigned int    scd_version; /* Version number of this table. */
130         unsigned int    first_quad_id;
131         unsigned int    quads_present31_0; /* 1 bit for each quad */
132         unsigned int    quads_present63_32; /* 1 bit for each quad */
133         unsigned int    config_flags;
134         unsigned int    boot_flags;
135         unsigned int    csr_start_addr; /* Absolute value (not in MB) */
136         unsigned int    csr_size; /* Absolute value (not in MB) */
137         unsigned int    lcl_apic_start_addr; /* Absolute value (not in MB) */
138         unsigned int    lcl_apic_size; /* Absolute value (not in MB) */
139         unsigned int    low_shrd_mem_base; /* 0 or 512MB or 1GB */
140         unsigned int    low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
141                                         /* may not be totally populated */
142         unsigned int    split_mem_enbl; /* 0 for no low shared memory */ 
143         unsigned int    mmio_sz; /* Size of total system memory mapped I/O */
144                                  /* (in MB). */
145         unsigned int    quad_spin_lock; /* Spare location used for quad */
146                                         /* bringup. */
147         unsigned int    nonzero55; /* For checksumming. */
148         unsigned int    nonzeroaa; /* For checksumming. */
149         unsigned int    scd_magic_number;
150         unsigned int    system_type;
151         unsigned int    checksum;
152         /*
153          *      memory configuration area for each quad
154          */
155         struct  eachquadmem eq[MAX_NUMNODES];   /* indexed by quad id */
156 };
157
158 static inline unsigned long *get_zholes_size(int nid)
159 {
160         return NULL;
161 }
162 #endif /* CONFIG_X86_NUMAQ */
163 #endif /* NUMAQ_H */
164