include/asm-mips/io.h

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 1994, 1995 Waldorf GmbH
   7  * Copyright (C) 1994 - 2000 Ralf Baechle
   8  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
   9  * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
  10  *      Author: Maciej W. Rozycki <macro@mips.com>
  11  */
  12 #ifndef _ASM_IO_H
  13 #define _ASM_IO_H
  14
  15 #include <linux/config.h>
  16 #include <linux/compiler.h>
  17 #include <linux/kernel.h>
  18 #include <linux/types.h>
  19
  20 #include <asm/addrspace.h>
  21 #include <asm/bug.h>
  22 #include <asm/byteorder.h>
  23 #include <asm/cpu.h>
  24 #include <asm/cpu-features.h>
  25 #include <asm/page.h>
  26 #include <asm/pgtable-bits.h>
  27 #include <asm/processor.h>
  28 #include <asm/string.h>
  29
  30 #include <ioremap.h>
  31 #include <mangle-port.h>
  32
  33 /*
  34  * Slowdown I/O port space accesses for antique hardware.
  35  */
  36 #undef CONF_SLOWDOWN_IO
  37
  38 /*
  39  * Raw operations are never swapped in software.  OTOH values that raw
  40  * operations are working on may or may not have been swapped by the bus
  41  * hardware.  An example use would be for flash memory that's used for
  42  * execute in place.
  43  */
  44 # define __raw_ioswabb(x)       (x)
  45 # define __raw_ioswabw(x)       (x)
  46 # define __raw_ioswabl(x)       (x)
  47 # define __raw_ioswabq(x)       (x)
  48 # define ____raw_ioswabq(x)     (x)
  49
  50 /*
  51  * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
  52  * less sane hardware forces software to fiddle with this...
  53  *
  54  * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
  55  * you can't have the numerical value of data and byte addresses within
  56  * multibyte quantities both preserved at the same time.  Hence two
  57  * variations of functions: non-prefixed ones that preserve the value
  58  * and prefixed ones that preserve byte addresses.  The latters are
  59  * typically used for moving raw data between a peripheral and memory (cf.
  60  * string I/O functions), hence the "mem_" prefix.
  61  */
  62 #if defined(CONFIG_SWAP_IO_SPACE)
  63
  64 # define ioswabb(x)             (x)
  65 # define mem_ioswabb(x)         (x)
  66 # ifdef CONFIG_SGI_IP22
  67 /*
  68  * IP22 seems braindead enough to swap 16bits values in hardware, but
  69  * not 32bits.  Go figure... Can't tell without documentation.
  70  */
  71 #  define ioswabw(x)            (x)
  72 #  define mem_ioswabw(x)        le16_to_cpu(x)
  73 # else
  74 #  define ioswabw(x)            le16_to_cpu(x)
  75 #  define mem_ioswabw(x)        (x)
  76 # endif
  77 # define ioswabl(x)             le32_to_cpu(x)
  78 # define mem_ioswabl(x)         (x)
  79 # define ioswabq(x)             le64_to_cpu(x)
  80 # define mem_ioswabq(x)         (x)
  81
  82 #else
  83
  84 # define ioswabb(x)             (x)
  85 # define mem_ioswabb(x)         (x)
  86 # define ioswabw(x)             (x)
  87 # define mem_ioswabw(x)         cpu_to_le16(x)
  88 # define ioswabl(x)             (x)
  89 # define mem_ioswabl(x)         cpu_to_le32(x)
  90 # define ioswabq(x)             (x)
  91 # define mem_ioswabq(x)         cpu_to_le32(x)
  92
  93 #endif
  94
  95 #define IO_SPACE_LIMIT 0xffff
  96
  97 /*
  98  * On MIPS I/O ports are memory mapped, so we access them using normal
  99  * load/store instructions. mips_io_port_base is the virtual address to
 100  * which all ports are being mapped.  For sake of efficiency some code
 101  * assumes that this is an address that can be loaded with a single lui
 102  * instruction, so the lower 16 bits must be zero.  Should be true on
 103  * on any sane architecture; generic code does not use this assumption.
 104  */
 105 extern const unsigned long mips_io_port_base;
 106
 107 #define set_io_port_base(base)  \
 108         do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
 109
 110 /*
 111  * Thanks to James van Artsdalen for a better timing-fix than
 112  * the two short jumps: using outb's to a nonexistent port seems
 113  * to guarantee better timings even on fast machines.
 114  *
 115  * On the other hand, I'd like to be sure of a non-existent port:
 116  * I feel a bit unsafe about using 0x80 (should be safe, though)
 117  *
 118  *              Linus
 119  *
 120  */
 121
 122 #define __SLOW_DOWN_IO \
 123         __asm__ __volatile__( \
 124                 "sb\t$0,0x80(%0)" \
 125                 : : "r" (mips_io_port_base));
 126
 127 #ifdef CONF_SLOWDOWN_IO
 128 #ifdef REALLY_SLOW_IO
 129 #define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
 130 #else
 131 #define SLOW_DOWN_IO __SLOW_DOWN_IO
 132 #endif
 133 #else
 134 #define SLOW_DOWN_IO
 135 #endif
 136
 137 /*
 138  *     virt_to_phys    -       map virtual addresses to physical
 139  *     @address: address to remap
 140  *
 141  *     The returned physical address is the physical (CPU) mapping for
 142  *     the memory address given. It is only valid to use this function on
 143  *     addresses directly mapped or allocated via kmalloc.
 144  *
 145  *     This function does not give bus mappings for DMA transfers. In
 146  *     almost all conceivable cases a device driver should not be using
 147  *     this function
 148  */
 149 static inline unsigned long virt_to_phys(volatile void * address)
 150 {
 151         return (unsigned long)address - PAGE_OFFSET;
 152 }
 153
 154 /*
 155  *     phys_to_virt    -       map physical address to virtual
 156  *     @address: address to remap
 157  *
 158  *     The returned virtual address is a current CPU mapping for
 159  *     the memory address given. It is only valid to use this function on
 160  *     addresses that have a kernel mapping
 161  *
 162  *     This function does not handle bus mappings for DMA transfers. In
 163  *     almost all conceivable cases a device driver should not be using
 164  *     this function
 165  */
 166 static inline void * phys_to_virt(unsigned long address)
 167 {
 168         return (void *)(address + PAGE_OFFSET);
 169 }
 170
 171 /*
 172  * ISA I/O bus memory addresses are 1:1 with the physical address.
 173  */
 174 static inline unsigned long isa_virt_to_bus(volatile void * address)
 175 {
 176         return (unsigned long)address - PAGE_OFFSET;
 177 }
 178
 179 static inline void * isa_bus_to_virt(unsigned long address)
 180 {
 181         return (void *)(address + PAGE_OFFSET);
 182 }
 183
 184 #define isa_page_to_bus page_to_phys
 185
 186 /*
 187  * However PCI ones are not necessarily 1:1 and therefore these interfaces
 188  * are forbidden in portable PCI drivers.
 189  *
 190  * Allow them for x86 for legacy drivers, though.
 191  */
 192 #define virt_to_bus virt_to_phys
 193 #define bus_to_virt phys_to_virt
 194
 195 /*
 196  * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
 197  * for the processor.  This implies the assumption that there is only
 198  * one of these busses.
 199  */
 200 extern unsigned long isa_slot_offset;
 201
 202 /*
 203  * Change "struct page" to physical address.
 204  */
 205 #define page_to_phys(page)      ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 206
 207 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 208 extern void __iounmap(volatile void __iomem *addr);
 209
 210 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 211         unsigned long flags)
 212 {
 213 #define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
 214
 215         if (cpu_has_64bit_addresses) {
 216                 u64 base = UNCAC_BASE;
 217
 218                 /*
 219                  * R10000 supports a 2 bit uncached attribute therefore
 220                  * UNCAC_BASE may not equal IO_BASE.
 221                  */
 222                 if (flags == _CACHE_UNCACHED)
 223                         base = (u64) IO_BASE;
 224                 return (void __iomem *) (unsigned long) (base + offset);
 225         } else if (__builtin_constant_p(offset) &&
 226                    __builtin_constant_p(size) && __builtin_constant_p(flags)) {
 227                 phys_t phys_addr, last_addr;
 228
 229                 phys_addr = fixup_bigphys_addr(offset, size);
 230
 231                 /* Don't allow wraparound or zero size. */
 232                 last_addr = phys_addr + size - 1;
 233                 if (!size || last_addr < phys_addr)
 234                         return NULL;
 235
 236                 /*
 237                  * Map uncached objects in the low 512MB of address
 238                  * space using KSEG1.
 239                  */
 240                 if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
 241                     flags == _CACHE_UNCACHED)
 242                         return (void __iomem *)CKSEG1ADDR(phys_addr);
 243         }
 244
 245         return __ioremap(offset, size, flags);
 246
 247 #undef __IS_LOW512
 248 }
 249
 250 /*
 251  * ioremap     -   map bus memory into CPU space
 252  * @offset:    bus address of the memory
 253  * @size:      size of the resource to map
 254  *
 255  * ioremap performs a platform specific sequence of operations to
 256  * make bus memory CPU accessible via the readb/readw/readl/writeb/
 257  * writew/writel functions and the other mmio helpers. The returned
 258  * address is not guaranteed to be usable directly as a virtual
 259  * address.
 260  */
 261 #define ioremap(offset, size)                                           \
 262         __ioremap_mode((offset), (size), _CACHE_UNCACHED)
 263
 264 /*
 265  * ioremap_nocache     -   map bus memory into CPU space
 266  * @offset:    bus address of the memory
 267  * @size:      size of the resource to map
 268  *
 269  * ioremap_nocache performs a platform specific sequence of operations to
 270  * make bus memory CPU accessible via the readb/readw/readl/writeb/
 271  * writew/writel functions and the other mmio helpers. The returned
 272  * address is not guaranteed to be usable directly as a virtual
 273  * address.
 274  *
 275  * This version of ioremap ensures that the memory is marked uncachable
 276  * on the CPU as well as honouring existing caching rules from things like
 277  * the PCI bus. Note that there are other caches and buffers on many
 278  * busses. In paticular driver authors should read up on PCI writes
 279  *
 280  * It's useful if some control registers are in such an area and
 281  * write combining or read caching is not desirable:
 282  */
 283 #define ioremap_nocache(offset, size)                                   \
 284         __ioremap_mode((offset), (size), _CACHE_UNCACHED)
 285
 286 /*
 287  * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
 288  * requests a cachable mapping, ioremap_uncached_accelerated requests a
 289  * mapping using the uncached accelerated mode which isn't supported on
 290  * all processors.
 291  */
 292 #define ioremap_cacheable_cow(offset, size)                             \
 293         __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
 294 #define ioremap_uncached_accelerated(offset, size)                      \
 295         __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
 296
 297 static inline void iounmap(volatile void __iomem *addr)
 298 {
 299 #define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
 300
 301         if (cpu_has_64bit_addresses ||
 302             (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
 303                 return;
 304
 305         __iounmap(addr);
 306
 307 #undef __IS_KSEG1
 308 }
 309
 310 #define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)                     \
 311                                                                         \
 312 static inline void pfx##write##bwlq(type val,                           \
 313                                     volatile void __iomem *mem)         \
 314 {                                                                       \
 315         volatile type *__mem;                                           \
 316         type __val;                                                     \
 317                                                                         \
 318         __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));    \
 319                                                                         \
 320         __val = pfx##ioswab##bwlq(val);                                 \
 321                                                                         \
 322         if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
 323                 *__mem = __val;                                         \
 324         else if (cpu_has_64bits) {                                      \
 325                 unsigned long __flags;                                  \
 326                 type __tmp;                                             \
 327                                                                         \
 328                 if (irq)                                                \
 329                         local_irq_save(__flags);                        \
 330                 __asm__ __volatile__(                                   \
 331                         ".set   mips3"          "\t\t# __writeq""\n\t"  \
 332                         "dsll32 %L0, %L0, 0"                    "\n\t"  \
 333                         "dsrl32 %L0, %L0, 0"                    "\n\t"  \
 334                         "dsll32 %M0, %M0, 0"                    "\n\t"  \
 335                         "or     %L0, %L0, %M0"                  "\n\t"  \
 336                         "sd     %L0, %2"                        "\n\t"  \
 337                         ".set   mips0"                          "\n"    \
 338                         : "=r" (__tmp)                                  \
 339                         : "0" (__val), "m" (*__mem));                   \
 340                 if (irq)                                                \
 341                         local_irq_restore(__flags);                     \
 342         } else                                                          \
 343                 BUG();                                                  \
 344 }                                                                       \
 345                                                                         \
 346 static inline type pfx##read##bwlq(volatile void __iomem *mem)          \
 347 {                                                                       \
 348         volatile type *__mem;                                           \
 349         type __val;                                                     \
 350                                                                         \
 351         __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));    \
 352                                                                         \
 353         if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
 354                 __val = *__mem;                                         \
 355         else if (cpu_has_64bits) {                                      \
 356                 unsigned long __flags;                                  \
 357                                                                         \
 358                 if (irq)                                                \
 359                         local_irq_save(__flags);                        \
 360                 __asm__ __volatile__(                                   \
 361                         ".set   mips3"          "\t\t# __readq" "\n\t"  \
 362                         "ld     %L0, %1"                        "\n\t"  \
 363                         "dsra32 %M0, %L0, 0"                    "\n\t"  \
 364                         "sll    %L0, %L0, 0"                    "\n\t"  \
 365                         ".set   mips0"                          "\n"    \
 366                         : "=r" (__val)                                  \
 367                         : "m" (*__mem));                                \
 368                 if (irq)                                                \
 369                         local_irq_restore(__flags);                     \
 370         } else {                                                        \
 371                 __val = 0;                                              \
 372                 BUG();                                                  \
 373         }                                                               \
 374                                                                         \
 375         return pfx##ioswab##bwlq(__val);                                \
 376 }
 377
 378 #define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)                 \
 379                                                                         \
 380 static inline void pfx##out##bwlq##p(type val, unsigned long port)      \
 381 {                                                                       \
 382         volatile type *__addr;                                          \
 383         type __val;                                                     \
 384                                                                         \
 385         port = __swizzle_addr_##bwlq(port);                             \
 386         __addr = (void *)(mips_io_port_base + port);                    \
 387                                                                         \
 388         __val = pfx##ioswab##bwlq(val);                                 \
 389                                                                         \
 390         /* Really, we want this to be atomic */                         \
 391         BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));             \
 392                                                                         \
 393         *__addr = __val;                                                \
 394         slow;                                                           \
 395 }                                                                       \
 396                                                                         \
 397 static inline type pfx##in##bwlq##p(unsigned long port)                 \
 398 {                                                                       \
 399         volatile type *__addr;                                          \
 400         type __val;                                                     \
 401                                                                         \
 402         port = __swizzle_addr_##bwlq(port);                             \
 403         __addr = (void *)(mips_io_port_base + port);                    \
 404                                                                         \
 405         BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));             \
 406                                                                         \
 407         __val = *__addr;                                                \
 408         slow;                                                           \
 409                                                                         \
 410         return pfx##ioswab##bwlq(__val);                                \
 411 }
 412
 413 #define __BUILD_MEMORY_PFX(bus, bwlq, type)                             \
 414                                                                         \
 415 __BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
 416
 417 #define BUILDIO_MEM(bwlq, type)                                         \
 418                                                                         \
 419 __BUILD_MEMORY_PFX(__raw_, bwlq, type)                                  \
 420 __BUILD_MEMORY_PFX(, bwlq, type)                                        \
 421 __BUILD_MEMORY_PFX(mem_, bwlq, type)                                    \
 422
 423 BUILDIO_MEM(b, u8)
 424 BUILDIO_MEM(w, u16)
 425 BUILDIO_MEM(l, u32)
 426 BUILDIO_MEM(q, u64)
 427
 428 #define __BUILD_IOPORT_PFX(bus, bwlq, type)                             \
 429         __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)                       \
 430         __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
 431
 432 #define BUILDIO_IOPORT(bwlq, type)                                      \
 433         __BUILD_IOPORT_PFX(, bwlq, type)                                \
 434         __BUILD_IOPORT_PFX(mem_, bwlq, type)
 435
 436 BUILDIO_IOPORT(b, u8)
 437 BUILDIO_IOPORT(w, u16)
 438 BUILDIO_IOPORT(l, u32)
 439 #ifdef CONFIG_64BIT
 440 BUILDIO_IOPORT(q, u64)
 441 #endif
 442
 443 #define __BUILDIO(bwlq, type)                                           \
 444                                                                         \
 445 __BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
 446
 447 __BUILDIO(q, u64)
 448
 449 #define readb_relaxed                   readb
 450 #define readw_relaxed                   readw
 451 #define readl_relaxed                   readl
 452 #define readq_relaxed                   readq
 453
 454 /*
 455  * Some code tests for these symbols
 456  */
 457 #define readq                           readq
 458 #define writeq                          writeq
 459
 460 #define __BUILD_MEMORY_STRING(bwlq, type)                               \
 461                                                                         \
 462 static inline void writes##bwlq(volatile void __iomem *mem,             \
 463                                 const void *addr, unsigned int count)   \
 464 {                                                                       \
 465         const volatile type *__addr = addr;                             \
 466                                                                         \
 467         while (count--) {                                               \
 468                 mem_write##bwlq(*__addr, mem);                          \
 469                 __addr++;                                               \
 470         }                                                               \
 471 }                                                                       \
 472                                                                         \
 473 static inline void reads##bwlq(volatile void __iomem *mem, void *addr,  \
 474                                unsigned int count)                      \
 475 {                                                                       \
 476         volatile type *__addr = addr;                                   \
 477                                                                         \
 478         while (count--) {                                               \
 479                 *__addr = mem_read##bwlq(mem);                          \
 480                 __addr++;                                               \
 481         }                                                               \
 482 }
 483
 484 #define __BUILD_IOPORT_STRING(bwlq, type)                               \
 485                                                                         \
 486 static inline void outs##bwlq(unsigned long port, const void *addr,     \
 487                               unsigned int count)                       \
 488 {                                                                       \
 489         const volatile type *__addr = addr;                             \
 490                                                                         \
 491         while (count--) {                                               \
 492                 mem_out##bwlq(*__addr, port);                           \
 493                 __addr++;                                               \
 494         }                                                               \
 495 }                                                                       \
 496                                                                         \
 497 static inline void ins##bwlq(unsigned long port, void *addr,            \
 498                              unsigned int count)                        \
 499 {                                                                       \
 500         volatile type *__addr = addr;                                   \
 501                                                                         \
 502         while (count--) {                                               \
 503                 *__addr = mem_in##bwlq(port);                           \
 504                 __addr++;                                               \
 505         }                                                               \
 506 }
 507
 508 #define BUILDSTRING(bwlq, type)                                         \
 509                                                                         \
 510 __BUILD_MEMORY_STRING(bwlq, type)                                       \
 511 __BUILD_IOPORT_STRING(bwlq, type)
 512
 513 BUILDSTRING(b, u8)
 514 BUILDSTRING(w, u16)
 515 BUILDSTRING(l, u32)
 516 #ifdef CONFIG_64BIT
 517 BUILDSTRING(q, u64)
 518 #endif
 519
 520
 521 /* Depends on MIPS II instruction set */
 522 #define mmiowb() asm volatile ("sync" ::: "memory")
 523
 524 static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
 525 {
 526         memset((void __force *) addr, val, count);
 527 }
 528 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
 529 {
 530         memcpy(dst, (void __force *) src, count);
 531 }
 532 static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
 533 {
 534         memcpy((void __force *) dst, src, count);
 535 }
 536
 537 /*
 538  * Memory Mapped I/O
 539  */
 540 #define ioread8(addr)           readb(addr)
 541 #define ioread16(addr)          readw(addr)
 542 #define ioread32(addr)          readl(addr)
 543
 544 #define iowrite8(b,addr)        writeb(b,addr)
 545 #define iowrite16(w,addr)       writew(w,addr)
 546 #define iowrite32(l,addr)       writel(l,addr)
 547
 548 #define ioread8_rep(a,b,c)      readsb(a,b,c)
 549 #define ioread16_rep(a,b,c)     readsw(a,b,c)
 550 #define ioread32_rep(a,b,c)     readsl(a,b,c)
 551
 552 #define iowrite8_rep(a,b,c)     writesb(a,b,c)
 553 #define iowrite16_rep(a,b,c)    writesw(a,b,c)
 554 #define iowrite32_rep(a,b,c)    writesl(a,b,c)
 555
 556 /* Create a virtual mapping cookie for an IO port range */
 557 extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
 558 extern void ioport_unmap(void __iomem *);
 559
 560 /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
 561 struct pci_dev;
 562 extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
 563 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 564
 565 /*
 566  * ISA space is 'always mapped' on currently supported MIPS systems, no need
 567  * to explicitly ioremap() it. The fact that the ISA IO space is mapped
 568  * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
 569  * are physical addresses. The following constant pointer can be
 570  * used as the IO-area pointer (it can be iounmapped as well, so the
 571  * analogy with PCI is quite large):
 572  */
 573 #define __ISA_IO_base ((char *)(isa_slot_offset))
 574
 575 #define isa_readb(a)            readb(__ISA_IO_base + (a))
 576 #define isa_readw(a)            readw(__ISA_IO_base + (a))
 577 #define isa_readl(a)            readl(__ISA_IO_base + (a))
 578 #define isa_readq(a)            readq(__ISA_IO_base + (a))
 579 #define isa_writeb(b,a)         writeb(b,__ISA_IO_base + (a))
 580 #define isa_writew(w,a)         writew(w,__ISA_IO_base + (a))
 581 #define isa_writel(l,a)         writel(l,__ISA_IO_base + (a))
 582 #define isa_writeq(q,a)         writeq(q,__ISA_IO_base + (a))
 583 #define isa_memset_io(a,b,c)    memset_io(__ISA_IO_base + (a),(b),(c))
 584 #define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c))
 585 #define isa_memcpy_toio(a,b,c)  memcpy_toio(__ISA_IO_base + (a),(b),(c))
 586
 587 /*
 588  * We don't have csum_partial_copy_fromio() yet, so we cheat here and
 589  * just copy it. The net code will then do the checksum later.
 590  */
 591 #define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len))
 592 #define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d))
 593
 594 /*
 595  *     check_signature         -       find BIOS signatures
 596  *     @io_addr: mmio address to check
 597  *     @signature:  signature block
 598  *     @length: length of signature
 599  *
 600  *     Perform a signature comparison with the mmio address io_addr. This
 601  *     address should have been obtained by ioremap.
 602  *     Returns 1 on a match.
 603  */
 604 static inline int check_signature(char __iomem *io_addr,
 605         const unsigned char *signature, int length)
 606 {
 607         int retval = 0;
 608         do {
 609                 if (readb(io_addr) != *signature)
 610                         goto out;
 611                 io_addr++;
 612                 signature++;
 613                 length--;
 614         } while (length);
 615         retval = 1;
 616 out:
 617         return retval;
 618 }
 619
 620 /*
 621  * The caches on some architectures aren't dma-coherent and have need to
 622  * handle this in software.  There are three types of operations that
 623  * can be applied to dma buffers.
 624  *
 625  *  - dma_cache_wback_inv(start, size) makes caches and coherent by
 626  *    writing the content of the caches back to memory, if necessary.
 627  *    The function also invalidates the affected part of the caches as
 628  *    necessary before DMA transfers from outside to memory.
 629  *  - dma_cache_wback(start, size) makes caches and coherent by
 630  *    writing the content of the caches back to memory, if necessary.
 631  *    The function also invalidates the affected part of the caches as
 632  *    necessary before DMA transfers from outside to memory.
 633  *  - dma_cache_inv(start, size) invalidates the affected parts of the
 634  *    caches.  Dirty lines of the caches may be written back or simply
 635  *    be discarded.  This operation is necessary before dma operations
 636  *    to the memory.
 637  */
 638 #ifdef CONFIG_DMA_NONCOHERENT
 639
 640 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
 641 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
 642 extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 643
 644 #define dma_cache_wback_inv(start, size)        _dma_cache_wback_inv(start,size)
 645 #define dma_cache_wback(start, size)            _dma_cache_wback(start,size)
 646 #define dma_cache_inv(start, size)              _dma_cache_inv(start,size)
 647
 648 #else /* Sane hardware */
 649
 650 #define dma_cache_wback_inv(start,size) \
 651         do { (void) (start); (void) (size); } while (0)
 652 #define dma_cache_wback(start,size)     \
 653         do { (void) (start); (void) (size); } while (0)
 654 #define dma_cache_inv(start,size)       \
 655         do { (void) (start); (void) (size); } while (0)
 656
 657 #endif /* CONFIG_DMA_NONCOHERENT */
 658
 659 /*
 660  * Read a 32-bit register that requires a 64-bit read cycle on the bus.
 661  * Avoid interrupt mucking, just adjust the address for 4-byte access.
 662  * Assume the addresses are 8-byte aligned.
 663  */
 664 #ifdef __MIPSEB__
 665 #define __CSR_32_ADJUST 4
 666 #else
 667 #define __CSR_32_ADJUST 0
 668 #endif
 669
 670 #define csr_out32(v,a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
 671 #define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
 672
 673 /*
 674  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
 675  * access
 676  */
 677 #define xlate_dev_mem_ptr(p)    __va(p)
 678
 679 /*
 680  * Convert a virtual cached pointer to an uncached pointer
 681  */
 682 #define xlate_dev_kmem_ptr(p)   p
 683
 684 #endif /* _ASM_IO_H */