Pull novell-bugzilla-156426 into release branch
[sfrench/cifs-2.6.git] / include / acpi / acmacros.h
1 /******************************************************************************
2  *
3  * Name: acmacros.h - C macros for the entire subsystem.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2006, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #ifndef __ACMACROS_H__
45 #define __ACMACROS_H__
46
47 /*
48  * Data manipulation macros
49  */
50 #define ACPI_LOWORD(l)                  ((u16)(u32)(l))
51 #define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
52 #define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
53 #define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
54
55 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
56 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
57 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
58
59 /* Size calculation */
60
61 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
62
63 #if ACPI_MACHINE_WIDTH == 16
64
65 /*
66  * For 16-bit addresses, we have to assume that the upper 32 bits
67  * (out of 64) are zero.
68  */
69 #define ACPI_LODWORD(l)                 ((u32)(l))
70 #define ACPI_HIDWORD(l)                 ((u32)(0))
71
72 #define ACPI_GET_ADDRESS(a)             ((a).lo)
73 #define ACPI_STORE_ADDRESS(a,b)         {(a).hi=0;(a).lo=(u32)(b);}
74 #define ACPI_VALID_ADDRESS(a)           ((a).hi | (a).lo)
75
76 #else
77 #ifdef ACPI_NO_INTEGER64_SUPPORT
78 /*
79  * acpi_integer is 32-bits, no 64-bit support on this platform
80  */
81 #define ACPI_LODWORD(l)                 ((u32)(l))
82 #define ACPI_HIDWORD(l)                 ((u32)(0))
83
84 #define ACPI_GET_ADDRESS(a)             (a)
85 #define ACPI_STORE_ADDRESS(a,b)         ((a)=(b))
86 #define ACPI_VALID_ADDRESS(a)           (a)
87
88 #else
89
90 /*
91  * Full 64-bit address/integer on both 32-bit and 64-bit platforms
92  */
93 #define ACPI_LODWORD(l)                 ((u32)(u64)(l))
94 #define ACPI_HIDWORD(l)                 ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
95
96 #define ACPI_GET_ADDRESS(a)             (a)
97 #define ACPI_STORE_ADDRESS(a,b)         ((a)=(acpi_physical_address)(b))
98 #define ACPI_VALID_ADDRESS(a)           (a)
99 #endif
100 #endif
101
102 /*
103  * printf() format helpers
104  */
105
106 /* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
107
108 #define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
109
110 /*
111  * Extract data using a pointer.  Any more than a byte and we
112  * get into potential aligment issues -- see the STORE macros below.
113  * Use with care.
114  */
115 #define ACPI_GET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
116 #define ACPI_GET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
117 #define ACPI_GET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
118 #define ACPI_GET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
119 #define ACPI_SET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
120 #define ACPI_SET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
121 #define ACPI_SET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
122 #define ACPI_SET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
123
124 /*
125  * Pointer manipulation
126  */
127 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
128 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
129 #define ACPI_ADD_PTR(t,a,b)             ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
130 #define ACPI_PTR_DIFF(a,b)              (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
131
132 /* Pointer/Integer type conversions */
133
134 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
135 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
136 #define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
137
138 #if ACPI_MACHINE_WIDTH == 16
139 #define ACPI_STORE_POINTER(d,s)         ACPI_MOVE_32_TO_32(d,s)
140 #define ACPI_PHYSADDR_TO_PTR(i)         (void *)(i)
141 #define ACPI_PTR_TO_PHYSADDR(i)         (u32) ACPI_CAST_PTR (u8,(i))
142 #else
143 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
144 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
145 #endif
146
147 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
148 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
149 #else
150 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
151 #endif
152
153 /*
154  * Macros for moving data around to/from buffers that are possibly unaligned.
155  * If the hardware supports the transfer of unaligned data, just do the store.
156  * Otherwise, we have to move one byte at a time.
157  */
158 #ifdef ACPI_BIG_ENDIAN
159 /*
160  * Macros for big-endian machines
161  */
162
163 /* This macro sets a buffer index, starting from the end of the buffer */
164
165 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
166
167 /* These macros reverse the bytes during the move, converting little-endian to big endian */
168
169          /* Big Endian      <==        Little Endian */
170          /*  Hi...Lo                     Lo...Hi     */
171 /* 16-bit source, 16/32/64 destination */
172
173 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
174                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
175
176 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
177                                           ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
178                                           ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
179
180 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
181                                                            ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
182                                                            ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
183
184 /* 32-bit source, 16/32/64 destination */
185
186 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
187
188 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
189                                                                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
190                                                                           ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
191                                                                           ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
192
193 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
194                                                                                    ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
195                                                                                    ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
196                                                                                    ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
197                                                                                    ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
198
199 /* 64-bit source, 16/32/64 destination */
200
201 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
202
203 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
204
205 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
206                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
207                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
208                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
209                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
210                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
211                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
212                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
213 #else
214 /*
215  * Macros for little-endian machines
216  */
217
218 /* This macro sets a buffer index, starting from the beginning of the buffer */
219
220 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
221
222 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
223
224 /* The hardware supports unaligned transfers, just do the little-endian move */
225
226 #if ACPI_MACHINE_WIDTH == 16
227
228 /* No 64-bit integers */
229 /* 16-bit source, 16/32/64 destination */
230
231 #define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
232 #define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
233 #define ACPI_MOVE_16_TO_64(d,s)         ACPI_MOVE_16_TO_32(d,s)
234
235 /* 32-bit source, 16/32/64 destination */
236
237 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
238 #define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
239 #define ACPI_MOVE_32_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
240
241 /* 64-bit source, 16/32/64 destination */
242
243 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
244 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
245 #define ACPI_MOVE_64_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
246
247 #else
248 /* 16-bit source, 16/32/64 destination */
249
250 #define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
251 #define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
252 #define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
253
254 /* 32-bit source, 16/32/64 destination */
255
256 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
257 #define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
258 #define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
259
260 /* 64-bit source, 16/32/64 destination */
261
262 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
263 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
264 #define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
265 #endif
266
267 #else
268 /*
269  * The hardware does not support unaligned transfers.  We must move the
270  * data one byte at a time.  These macros work whether the source or
271  * the destination (or both) is/are unaligned.  (Little-endian move)
272  */
273
274 /* 16-bit source, 16/32/64 destination */
275
276 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
277                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
278
279 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
280 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
281
282 /* 32-bit source, 16/32/64 destination */
283
284 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
285
286 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
287                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
288                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
289                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
290
291 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
292
293 /* 64-bit source, 16/32/64 destination */
294
295 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
296 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
297 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
298                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
299                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
300                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
301                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
302                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
303                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
304                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
305 #endif
306 #endif
307
308 /* Macros based on machine integer width */
309
310 #if ACPI_MACHINE_WIDTH == 16
311 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_16_TO_16(d,s)
312
313 #elif ACPI_MACHINE_WIDTH == 32
314 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
315
316 #elif ACPI_MACHINE_WIDTH == 64
317 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
318
319 #else
320 #error unknown ACPI_MACHINE_WIDTH
321 #endif
322
323 /*
324  * Fast power-of-two math macros for non-optimized compilers
325  */
326 #define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
327 #define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
328 #define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
329
330 #define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
331 #define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
332 #define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
333
334 #define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
335 #define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
336 #define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
337
338 #define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
339 #define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
340 #define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
341
342 #define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
343 #define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
344 #define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
345
346 #define ACPI_DIV_32(a)                  _ACPI_DIV(a,5)
347 #define ACPI_MUL_32(a)                  _ACPI_MUL(a,5)
348 #define ACPI_MOD_32(a)                  _ACPI_MOD(a,32)
349
350 /*
351  * Rounding macros (Power of two boundaries only)
352  */
353 #define ACPI_ROUND_DOWN(value,boundary)     (((acpi_native_uint)(value)) & \
354                                                                                                 (~(((acpi_native_uint) boundary)-1)))
355
356 #define ACPI_ROUND_UP(value,boundary)       ((((acpi_native_uint)(value)) + \
357                                                                                                 (((acpi_native_uint) boundary)-1)) & \
358                                                                                                 (~(((acpi_native_uint) boundary)-1)))
359
360 /* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */
361
362 #define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a,4)
363 #define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a,8)
364 #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint))
365
366 #define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a,4)
367 #define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a,8)
368 #define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a,sizeof(acpi_native_uint))
369
370 #define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
371 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))
372
373 #define ACPI_ROUND_UP_TO_1K(a)              (((a) + 1023) >> 10)
374
375 /* Generic (non-power-of-two) rounding */
376
377 #define ACPI_ROUND_UP_TO(value,boundary)    (((value) + ((boundary)-1)) / (boundary))
378
379 #define ACPI_IS_MISALIGNED(value)           (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1))
380
381 /*
382  * Bitmask creation
383  * Bit positions start at zero.
384  * MASK_BITS_ABOVE creates a mask starting AT the position and above
385  * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
386  */
387 #define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_INTEGER_MAX) << ((u32) (position))))
388 #define ACPI_MASK_BITS_BELOW(position)      ((ACPI_INTEGER_MAX) << ((u32) (position)))
389
390 #define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
391
392 /* Bitfields within ACPI registers */
393
394 #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
395 #define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
396
397 /* Generate a UUID */
398
399 #define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
400         (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
401         (b) & 0xFF, ((b) >> 8) & 0xFF, \
402         (c) & 0xFF, ((c) >> 8) & 0xFF, \
403         (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
404
405 /*
406  * An struct acpi_namespace_node * can appear in some contexts,
407  * where a pointer to an union acpi_operand_object    can also
408  * appear.  This macro is used to distinguish them.
409  *
410  * The "Descriptor" field is the first field in both structures.
411  */
412 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
413 #define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
414
415 /* Macro to test the object type */
416
417 #define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
418
419 /* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
420
421 #define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
422
423 /*
424  * Macros for the master AML opcode table
425  */
426 #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
427 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
428 #else
429 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
430 #endif
431
432 #ifdef ACPI_DISASSEMBLER
433 #define ACPI_DISASM_ONLY_MEMBERS(a)     a;
434 #else
435 #define ACPI_DISASM_ONLY_MEMBERS(a)
436 #endif
437
438 #define ARG_TYPE_WIDTH                  5
439 #define ARG_1(x)                        ((u32)(x))
440 #define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
441 #define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
442 #define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
443 #define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
444 #define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
445
446 #define ARGI_LIST1(a)                   (ARG_1(a))
447 #define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
448 #define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
449 #define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
450 #define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
451 #define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
452
453 #define ARGP_LIST1(a)                   (ARG_1(a))
454 #define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
455 #define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
456 #define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
457 #define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
458 #define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
459
460 #define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
461 #define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
462
463 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
464 /*
465  * Module name is include in both debug and non-debug versions primarily for
466  * error messages. The __FILE__ macro is not very useful for this, because it
467  * often includes the entire pathname to the module
468  */
469 #define ACPI_MODULE_NAME(name)          static char ACPI_UNUSED_VAR *_acpi_module_name = name;
470 #else
471 #define ACPI_MODULE_NAME(name)
472 #endif
473
474 /*
475  * Ascii error messages can be configured out
476  */
477 #ifndef ACPI_NO_ERROR_MESSAGES
478 #define AE_INFO                         _acpi_module_name, __LINE__
479
480 /*
481  * Error reporting. Callers module and line number are inserted by AE_INFO,
482  * the plist contains a set of parens to allow variable-length lists.
483  * These macros are used for both the debug and non-debug versions of the code.
484  */
485 #define ACPI_INFO(plist)                acpi_ut_info plist
486 #define ACPI_WARNING(plist)             acpi_ut_warning plist
487 #define ACPI_EXCEPTION(plist)           acpi_ut_exception plist
488 #define ACPI_ERROR(plist)               acpi_ut_error plist
489 #define ACPI_ERROR_NAMESPACE(s,e)       acpi_ns_report_error (AE_INFO, s, e);
490 #define ACPI_ERROR_METHOD(s,n,p,e)      acpi_ns_report_method_error (AE_INFO, s, n, p, e);
491
492 #else
493
494 /* No error messages */
495
496 #define ACPI_INFO(plist)
497 #define ACPI_WARNING(plist)
498 #define ACPI_EXCEPTION(plist)
499 #define ACPI_ERROR(plist)
500 #define ACPI_ERROR_NAMESPACE(s,e)
501 #define ACPI_ERROR_METHOD(s,n,p,e)
502 #endif
503
504 /*
505  * Debug macros that are conditionally compiled
506  */
507 #ifdef ACPI_DEBUG_OUTPUT
508
509 /*
510  * Common parameters used for debug output functions:
511  * line number, function name, module(file) name, component ID
512  */
513 #define ACPI_DEBUG_PARAMETERS           __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
514
515 /*
516  * Function entry tracing
517  */
518
519 /*
520  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
521  * define it now. This is the case where there the compiler does not support
522  * a __FUNCTION__ macro or equivalent. We save the function name on the
523  * local stack.
524  */
525 #ifndef ACPI_GET_FUNCTION_NAME
526 #define ACPI_GET_FUNCTION_NAME          _acpi_function_name
527 /*
528  * The Name parameter should be the procedure name as a quoted string.
529  * This is declared as a local string ("MyFunctionName") so that it can
530  * be also used by the function exit macros below.
531  * Note: (const char) is used to be compatible with the debug interfaces
532  * and macros such as __FUNCTION__.
533  */
534 #define ACPI_FUNCTION_NAME(name)        const char *_acpi_function_name = #name;
535
536 #else
537 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
538
539 #define ACPI_FUNCTION_NAME(name)
540 #endif
541
542 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
543                           acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
544 #define ACPI_FUNCTION_TRACE_PTR(a,b)    ACPI_FUNCTION_NAME(a) \
545                                            acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
546 #define ACPI_FUNCTION_TRACE_U32(a,b)    ACPI_FUNCTION_NAME(a) \
547                                                          acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
548 #define ACPI_FUNCTION_TRACE_STR(a,b)    ACPI_FUNCTION_NAME(a) \
549                                                                           acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
550
551 #define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()
552
553 /*
554  * Function exit tracing.
555  * WARNING: These macros include a return statement.  This is usually considered
556  * bad form, but having a separate exit macro is very ugly and difficult to maintain.
557  * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
558  * so that "_AcpiFunctionName" is defined.
559  *
560  * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
561  * about these constructs.
562  */
563 #ifdef ACPI_USE_DO_WHILE_0
564 #define ACPI_DO_WHILE0(a)               do a while(0)
565 #else
566 #define ACPI_DO_WHILE0(a)               a
567 #endif
568
569 #define return_VOID                     ACPI_DO_WHILE0 ({ \
570                                                                                         acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
571                                                                                         return;})
572 /*
573  * There are two versions of most of the return macros. The default version is
574  * safer, since it avoids side-effects by guaranteeing that the argument will
575  * not be evaluated twice.
576  *
577  * A less-safe version of the macros is provided for optional use if the
578  * compiler uses excessive CPU stack (for example, this may happen in the
579  * debug case if code optimzation is disabled.)
580  */
581 #ifndef ACPI_SIMPLE_RETURN_MACROS
582
583 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
584                                                                                         register acpi_status _s = (s); \
585                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
586                                                                                         return (_s); })
587 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
588                                                                                         register void *_s = (void *) (s); \
589                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
590                                                                                         return (_s); })
591 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
592                                                                                         register acpi_integer _s = (s); \
593                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
594                                                                                         return (_s); })
595 #define return_UINT8(s)                 ACPI_DO_WHILE0 ({ \
596                                                                                         register u8 _s = (u8) (s); \
597                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
598                                                                                         return (_s); })
599 #define return_UINT32(s)                ACPI_DO_WHILE0 ({ \
600                                                                                         register u32 _s = (u32) (s); \
601                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
602                                                                                         return (_s); })
603 #else                           /* Use original less-safe macros */
604
605 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
606                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
607                                                                                         return((s)); })
608 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
609                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
610                                                                                         return((s)); })
611 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
612                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
613                                                                                         return((s)); })
614 #define return_UINT8(s)                 return_VALUE(s)
615 #define return_UINT32(s)                return_VALUE(s)
616
617 #endif                          /* ACPI_SIMPLE_RETURN_MACROS */
618
619 /* Conditional execution */
620
621 #define ACPI_DEBUG_EXEC(a)              a
622 #define ACPI_NORMAL_EXEC(a)
623
624 #define ACPI_DEBUG_DEFINE(a)            a;
625 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
626 #define _VERBOSE_STRUCTURES
627
628 /* Stack and buffer dumping */
629
630 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
631 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)   acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__)
632
633 #define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
634 #define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
635 #define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
636 #define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
637
638 /*
639  * Master debug print macros
640  * Print iff:
641  *    1) Debug print for the current component is enabled
642  *    2) Debug error level or trace level for the print statement is enabled
643  */
644 #define ACPI_DEBUG_PRINT(plist)         acpi_ut_debug_print plist
645 #define ACPI_DEBUG_PRINT_RAW(plist)     acpi_ut_debug_print_raw plist
646
647 #else
648 /*
649  * This is the non-debug case -- make everything go away,
650  * leaving no executable debug code!
651  */
652 #define ACPI_DEBUG_EXEC(a)
653 #define ACPI_NORMAL_EXEC(a)             a;
654
655 #define ACPI_DEBUG_DEFINE(a)
656 #define ACPI_DEBUG_ONLY_MEMBERS(a)
657 #define ACPI_FUNCTION_NAME(a)
658 #define ACPI_FUNCTION_TRACE(a)
659 #define ACPI_FUNCTION_TRACE_PTR(a,b)
660 #define ACPI_FUNCTION_TRACE_U32(a,b)
661 #define ACPI_FUNCTION_TRACE_STR(a,b)
662 #define ACPI_FUNCTION_EXIT
663 #define ACPI_FUNCTION_STATUS_EXIT(s)
664 #define ACPI_FUNCTION_VALUE_EXIT(s)
665 #define ACPI_FUNCTION_ENTRY()
666 #define ACPI_DUMP_STACK_ENTRY(a)
667 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)
668 #define ACPI_DUMP_ENTRY(a,b)
669 #define ACPI_DUMP_TABLES(a,b)
670 #define ACPI_DUMP_PATHNAME(a,b,c,d)
671 #define ACPI_DUMP_RESOURCE_LIST(a)
672 #define ACPI_DUMP_BUFFER(a,b)
673 #define ACPI_DEBUG_PRINT(pl)
674 #define ACPI_DEBUG_PRINT_RAW(pl)
675
676 #define return_VOID                     return
677 #define return_ACPI_STATUS(s)           return(s)
678 #define return_VALUE(s)                 return(s)
679 #define return_UINT8(s)                 return(s)
680 #define return_UINT32(s)                return(s)
681 #define return_PTR(s)                   return(s)
682
683 #endif
684
685 /*
686  * Some code only gets executed when the debugger is built in.
687  * Note that this is entirely independent of whether the
688  * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
689  */
690 #ifdef ACPI_DEBUGGER
691 #define ACPI_DEBUGGER_EXEC(a)           a
692 #else
693 #define ACPI_DEBUGGER_EXEC(a)
694 #endif
695
696 /*
697  * For 16-bit code, we want to shrink some things even though
698  * we are using ACPI_DEBUG_OUTPUT to get the debug output
699  */
700 #if ACPI_MACHINE_WIDTH == 16
701 #undef ACPI_DEBUG_ONLY_MEMBERS
702 #undef _VERBOSE_STRUCTURES
703 #define ACPI_DEBUG_ONLY_MEMBERS(a)
704 #endif
705
706 #ifdef ACPI_DEBUG_OUTPUT
707 /*
708  * 1) Set name to blanks
709  * 2) Copy the object name
710  */
711 #define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
712                                                                                 ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
713 #else
714
715 #define ACPI_ADD_OBJECT_NAME(a,b)
716 #endif
717
718 /*
719  * Memory allocation tracking (DEBUG ONLY)
720  */
721 #ifndef ACPI_DBG_TRACK_ALLOCATIONS
722
723 /* Memory allocation */
724
725 #define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
726 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
727 #define ACPI_FREE(a)                acpi_os_free(a)
728 #define ACPI_MEM_TRACKING(a)
729
730 #else
731
732 /* Memory allocation */
733
734 #define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
735 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
736 #define ACPI_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
737 #define ACPI_MEM_TRACKING(a)        a
738
739 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
740
741 #endif                          /* ACMACROS_H */