drivers/video/fbdev/s3c2410fb.c

   1 /* linux/drivers/video/s3c2410fb.c
   2  *      Copyright (c) 2004,2005 Arnaud Patard
   3  *      Copyright (c) 2004-2008 Ben Dooks
   4  *
   5  * S3C2410 LCD Framebuffer Driver
   6  *
   7  * This file is subject to the terms and conditions of the GNU General Public
   8  * License.  See the file COPYING in the main directory of this archive for
   9  * more details.
  10  *
  11  * Driver based on skeletonfb.c, sa1100fb.c and others.
  12 */
  13
  14 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/err.h>
  19 #include <linux/errno.h>
  20 #include <linux/string.h>
  21 #include <linux/mm.h>
  22 #include <linux/slab.h>
  23 #include <linux/delay.h>
  24 #include <linux/fb.h>
  25 #include <linux/init.h>
  26 #include <linux/dma-mapping.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/clk.h>
  30 #include <linux/cpufreq.h>
  31 #include <linux/io.h>
  32
  33 #include <asm/div64.h>
  34
  35 #include <asm/mach/map.h>
  36 #include <mach/regs-lcd.h>
  37 #include <mach/regs-gpio.h>
  38 #include <mach/fb.h>
  39
  40 #ifdef CONFIG_PM
  41 #include <linux/pm.h>
  42 #endif
  43
  44 #include "s3c2410fb.h"
  45
  46 /* Debugging stuff */
  47 #ifdef CONFIG_FB_S3C2410_DEBUG
  48 static int debug        = 1;
  49 #else
  50 static int debug;
  51 #endif
  52
  53 #define dprintk(msg...) \
  54 do { \
  55         if (debug) \
  56                 pr_debug(msg); \
  57 } while (0)
  58
  59 /* useful functions */
  60
  61 static int is_s3c2412(struct s3c2410fb_info *fbi)
  62 {
  63         return (fbi->drv_type == DRV_S3C2412);
  64 }
  65
  66 /* s3c2410fb_set_lcdaddr
  67  *
  68  * initialise lcd controller address pointers
  69  */
  70 static void s3c2410fb_set_lcdaddr(struct fb_info *info)
  71 {
  72         unsigned long saddr1, saddr2, saddr3;
  73         struct s3c2410fb_info *fbi = info->par;
  74         void __iomem *regs = fbi->io;
  75
  76         saddr1  = info->fix.smem_start >> 1;
  77         saddr2  = info->fix.smem_start;
  78         saddr2 += info->fix.line_length * info->var.yres;
  79         saddr2 >>= 1;
  80
  81         saddr3 = S3C2410_OFFSIZE(0) |
  82                  S3C2410_PAGEWIDTH((info->fix.line_length / 2) & 0x3ff);
  83
  84         dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
  85         dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
  86         dprintk("LCDSADDR3 = 0x%08lx\n", saddr3);
  87
  88         writel(saddr1, regs + S3C2410_LCDSADDR1);
  89         writel(saddr2, regs + S3C2410_LCDSADDR2);
  90         writel(saddr3, regs + S3C2410_LCDSADDR3);
  91 }
  92
  93 /* s3c2410fb_calc_pixclk()
  94  *
  95  * calculate divisor for clk->pixclk
  96  */
  97 static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
  98                                           unsigned long pixclk)
  99 {
 100         unsigned long clk = fbi->clk_rate;
 101         unsigned long long div;
 102
 103         /* pixclk is in picoseconds, our clock is in Hz
 104          *
 105          * Hz -> picoseconds is / 10^-12
 106          */
 107
 108         div = (unsigned long long)clk * pixclk;
 109         div >>= 12;                     /* div / 2^12 */
 110         do_div(div, 625 * 625UL * 625); /* div / 5^12 */
 111
 112         dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
 113         return div;
 114 }
 115
 116 /*
 117  *      s3c2410fb_check_var():
 118  *      Get the video params out of 'var'. If a value doesn't fit, round it up,
 119  *      if it's too big, return -EINVAL.
 120  *
 121  */
 122 static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
 123                                struct fb_info *info)
 124 {
 125         struct s3c2410fb_info *fbi = info->par;
 126         struct s3c2410fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
 127         struct s3c2410fb_display *display = NULL;
 128         struct s3c2410fb_display *default_display = mach_info->displays +
 129                                                     mach_info->default_display;
 130         int type = default_display->type;
 131         unsigned i;
 132
 133         dprintk("check_var(var=%p, info=%p)\n", var, info);
 134
 135         /* validate x/y resolution */
 136         /* choose default mode if possible */
 137         if (var->yres == default_display->yres &&
 138             var->xres == default_display->xres &&
 139             var->bits_per_pixel == default_display->bpp)
 140                 display = default_display;
 141         else
 142                 for (i = 0; i < mach_info->num_displays; i++)
 143                         if (type == mach_info->displays[i].type &&
 144                             var->yres == mach_info->displays[i].yres &&
 145                             var->xres == mach_info->displays[i].xres &&
 146                             var->bits_per_pixel == mach_info->displays[i].bpp) {
 147                                 display = mach_info->displays + i;
 148                                 break;
 149                         }
 150
 151         if (!display) {
 152                 dprintk("wrong resolution or depth %dx%d at %d bpp\n",
 153                         var->xres, var->yres, var->bits_per_pixel);
 154                 return -EINVAL;
 155         }
 156
 157         /* it is always the size as the display */
 158         var->xres_virtual = display->xres;
 159         var->yres_virtual = display->yres;
 160         var->height = display->height;
 161         var->width = display->width;
 162
 163         /* copy lcd settings */
 164         var->pixclock = display->pixclock;
 165         var->left_margin = display->left_margin;
 166         var->right_margin = display->right_margin;
 167         var->upper_margin = display->upper_margin;
 168         var->lower_margin = display->lower_margin;
 169         var->vsync_len = display->vsync_len;
 170         var->hsync_len = display->hsync_len;
 171
 172         fbi->regs.lcdcon5 = display->lcdcon5;
 173         /* set display type */
 174         fbi->regs.lcdcon1 = display->type;
 175
 176         var->transp.offset = 0;
 177         var->transp.length = 0;
 178         /* set r/g/b positions */
 179         switch (var->bits_per_pixel) {
 180         case 1:
 181         case 2:
 182         case 4:
 183                 var->red.offset = 0;
 184                 var->red.length = var->bits_per_pixel;
 185                 var->green      = var->red;
 186                 var->blue       = var->red;
 187                 break;
 188         case 8:
 189                 if (display->type != S3C2410_LCDCON1_TFT) {
 190                         /* 8 bpp 332 */
 191                         var->red.length         = 3;
 192                         var->red.offset         = 5;
 193                         var->green.length       = 3;
 194                         var->green.offset       = 2;
 195                         var->blue.length        = 2;
 196                         var->blue.offset        = 0;
 197                 } else {
 198                         var->red.offset         = 0;
 199                         var->red.length         = 8;
 200                         var->green              = var->red;
 201                         var->blue               = var->red;
 202                 }
 203                 break;
 204         case 12:
 205                 /* 12 bpp 444 */
 206                 var->red.length         = 4;
 207                 var->red.offset         = 8;
 208                 var->green.length       = 4;
 209                 var->green.offset       = 4;
 210                 var->blue.length        = 4;
 211                 var->blue.offset        = 0;
 212                 break;
 213
 214         default:
 215         case 16:
 216                 if (display->lcdcon5 & S3C2410_LCDCON5_FRM565) {
 217                         /* 16 bpp, 565 format */
 218                         var->red.offset         = 11;
 219                         var->green.offset       = 5;
 220                         var->blue.offset        = 0;
 221                         var->red.length         = 5;
 222                         var->green.length       = 6;
 223                         var->blue.length        = 5;
 224                 } else {
 225                         /* 16 bpp, 5551 format */
 226                         var->red.offset         = 11;
 227                         var->green.offset       = 6;
 228                         var->blue.offset        = 1;
 229                         var->red.length         = 5;
 230                         var->green.length       = 5;
 231                         var->blue.length        = 5;
 232                 }
 233                 break;
 234         case 32:
 235                 /* 24 bpp 888 and 8 dummy */
 236                 var->red.length         = 8;
 237                 var->red.offset         = 16;
 238                 var->green.length       = 8;
 239                 var->green.offset       = 8;
 240                 var->blue.length        = 8;
 241                 var->blue.offset        = 0;
 242                 break;
 243         }
 244         return 0;
 245 }
 246
 247 /* s3c2410fb_calculate_stn_lcd_regs
 248  *
 249  * calculate register values from var settings
 250  */
 251 static void s3c2410fb_calculate_stn_lcd_regs(const struct fb_info *info,
 252                                              struct s3c2410fb_hw *regs)
 253 {
 254         const struct s3c2410fb_info *fbi = info->par;
 255         const struct fb_var_screeninfo *var = &info->var;
 256         int type = regs->lcdcon1 & ~S3C2410_LCDCON1_TFT;
 257         int hs = var->xres >> 2;
 258         unsigned wdly = (var->left_margin >> 4) - 1;
 259         unsigned wlh = (var->hsync_len >> 4) - 1;
 260
 261         if (type != S3C2410_LCDCON1_STN4)
 262                 hs >>= 1;
 263
 264         switch (var->bits_per_pixel) {
 265         case 1:
 266                 regs->lcdcon1 |= S3C2410_LCDCON1_STN1BPP;
 267                 break;
 268         case 2:
 269                 regs->lcdcon1 |= S3C2410_LCDCON1_STN2GREY;
 270                 break;
 271         case 4:
 272                 regs->lcdcon1 |= S3C2410_LCDCON1_STN4GREY;
 273                 break;
 274         case 8:
 275                 regs->lcdcon1 |= S3C2410_LCDCON1_STN8BPP;
 276                 hs *= 3;
 277                 break;
 278         case 12:
 279                 regs->lcdcon1 |= S3C2410_LCDCON1_STN12BPP;
 280                 hs *= 3;
 281                 break;
 282
 283         default:
 284                 /* invalid pixel depth */
 285                 dev_err(fbi->dev, "invalid bpp %d\n",
 286                         var->bits_per_pixel);
 287         }
 288         /* update X/Y info */
 289         dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
 290                 var->left_margin, var->right_margin, var->hsync_len);
 291
 292         regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1);
 293
 294         if (wdly > 3)
 295                 wdly = 3;
 296
 297         if (wlh > 3)
 298                 wlh = 3;
 299
 300         regs->lcdcon3 = S3C2410_LCDCON3_WDLY(wdly) |
 301                         S3C2410_LCDCON3_LINEBLANK(var->right_margin / 8) |
 302                         S3C2410_LCDCON3_HOZVAL(hs - 1);
 303
 304         regs->lcdcon4 = S3C2410_LCDCON4_WLH(wlh);
 305 }
 306
 307 /* s3c2410fb_calculate_tft_lcd_regs
 308  *
 309  * calculate register values from var settings
 310  */
 311 static void s3c2410fb_calculate_tft_lcd_regs(const struct fb_info *info,
 312                                              struct s3c2410fb_hw *regs)
 313 {
 314         const struct s3c2410fb_info *fbi = info->par;
 315         const struct fb_var_screeninfo *var = &info->var;
 316
 317         switch (var->bits_per_pixel) {
 318         case 1:
 319                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
 320                 break;
 321         case 2:
 322                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
 323                 break;
 324         case 4:
 325                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
 326                 break;
 327         case 8:
 328                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
 329                 regs->lcdcon5 |= S3C2410_LCDCON5_BSWP |
 330                                  S3C2410_LCDCON5_FRM565;
 331                 regs->lcdcon5 &= ~S3C2410_LCDCON5_HWSWP;
 332                 break;
 333         case 16:
 334                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
 335                 regs->lcdcon5 &= ~S3C2410_LCDCON5_BSWP;
 336                 regs->lcdcon5 |= S3C2410_LCDCON5_HWSWP;
 337                 break;
 338         case 32:
 339                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT24BPP;
 340                 regs->lcdcon5 &= ~(S3C2410_LCDCON5_BSWP |
 341                                    S3C2410_LCDCON5_HWSWP |
 342                                    S3C2410_LCDCON5_BPP24BL);
 343                 break;
 344         default:
 345                 /* invalid pixel depth */
 346                 dev_err(fbi->dev, "invalid bpp %d\n",
 347                         var->bits_per_pixel);
 348         }
 349         /* update X/Y info */
 350         dprintk("setting vert: up=%d, low=%d, sync=%d\n",
 351                 var->upper_margin, var->lower_margin, var->vsync_len);
 352
 353         dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
 354                 var->left_margin, var->right_margin, var->hsync_len);
 355
 356         regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1) |
 357                         S3C2410_LCDCON2_VBPD(var->upper_margin - 1) |
 358                         S3C2410_LCDCON2_VFPD(var->lower_margin - 1) |
 359                         S3C2410_LCDCON2_VSPW(var->vsync_len - 1);
 360
 361         regs->lcdcon3 = S3C2410_LCDCON3_HBPD(var->right_margin - 1) |
 362                         S3C2410_LCDCON3_HFPD(var->left_margin - 1) |
 363                         S3C2410_LCDCON3_HOZVAL(var->xres - 1);
 364
 365         regs->lcdcon4 = S3C2410_LCDCON4_HSPW(var->hsync_len - 1);
 366 }
 367
 368 /* s3c2410fb_activate_var
 369  *
 370  * activate (set) the controller from the given framebuffer
 371  * information
 372  */
 373 static void s3c2410fb_activate_var(struct fb_info *info)
 374 {
 375         struct s3c2410fb_info *fbi = info->par;
 376         void __iomem *regs = fbi->io;
 377         int type = fbi->regs.lcdcon1 & S3C2410_LCDCON1_TFT;
 378         struct fb_var_screeninfo *var = &info->var;
 379         int clkdiv;
 380
 381         clkdiv = DIV_ROUND_UP(s3c2410fb_calc_pixclk(fbi, var->pixclock), 2);
 382
 383         dprintk("%s: var->xres  = %d\n", __func__, var->xres);
 384         dprintk("%s: var->yres  = %d\n", __func__, var->yres);
 385         dprintk("%s: var->bpp   = %d\n", __func__, var->bits_per_pixel);
 386
 387         if (type == S3C2410_LCDCON1_TFT) {
 388                 s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs);
 389                 --clkdiv;
 390                 if (clkdiv < 0)
 391                         clkdiv = 0;
 392         } else {
 393                 s3c2410fb_calculate_stn_lcd_regs(info, &fbi->regs);
 394                 if (clkdiv < 2)
 395                         clkdiv = 2;
 396         }
 397
 398         fbi->regs.lcdcon1 |=  S3C2410_LCDCON1_CLKVAL(clkdiv);
 399
 400         /* write new registers */
 401
 402         dprintk("new register set:\n");
 403         dprintk("lcdcon[1] = 0x%08lx\n", fbi->regs.lcdcon1);
 404         dprintk("lcdcon[2] = 0x%08lx\n", fbi->regs.lcdcon2);
 405         dprintk("lcdcon[3] = 0x%08lx\n", fbi->regs.lcdcon3);
 406         dprintk("lcdcon[4] = 0x%08lx\n", fbi->regs.lcdcon4);
 407         dprintk("lcdcon[5] = 0x%08lx\n", fbi->regs.lcdcon5);
 408
 409         writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID,
 410                 regs + S3C2410_LCDCON1);
 411         writel(fbi->regs.lcdcon2, regs + S3C2410_LCDCON2);
 412         writel(fbi->regs.lcdcon3, regs + S3C2410_LCDCON3);
 413         writel(fbi->regs.lcdcon4, regs + S3C2410_LCDCON4);
 414         writel(fbi->regs.lcdcon5, regs + S3C2410_LCDCON5);
 415
 416         /* set lcd address pointers */
 417         s3c2410fb_set_lcdaddr(info);
 418
 419         fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID,
 420         writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
 421 }
 422
 423 /*
 424  *      s3c2410fb_set_par - Alters the hardware state.
 425  *      @info: frame buffer structure that represents a single frame buffer
 426  *
 427  */
 428 static int s3c2410fb_set_par(struct fb_info *info)
 429 {
 430         struct fb_var_screeninfo *var = &info->var;
 431
 432         switch (var->bits_per_pixel) {
 433         case 32:
 434         case 16:
 435         case 12:
 436                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 437                 break;
 438         case 1:
 439                 info->fix.visual = FB_VISUAL_MONO01;
 440                 break;
 441         default:
 442                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 443                 break;
 444         }
 445
 446         info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
 447
 448         /* activate this new configuration */
 449
 450         s3c2410fb_activate_var(info);
 451         return 0;
 452 }
 453
 454 static void schedule_palette_update(struct s3c2410fb_info *fbi,
 455                                     unsigned int regno, unsigned int val)
 456 {
 457         unsigned long flags;
 458         unsigned long irqen;
 459         void __iomem *irq_base = fbi->irq_base;
 460
 461         local_irq_save(flags);
 462
 463         fbi->palette_buffer[regno] = val;
 464
 465         if (!fbi->palette_ready) {
 466                 fbi->palette_ready = 1;
 467
 468                 /* enable IRQ */
 469                 irqen = readl(irq_base + S3C24XX_LCDINTMSK);
 470                 irqen &= ~S3C2410_LCDINT_FRSYNC;
 471                 writel(irqen, irq_base + S3C24XX_LCDINTMSK);
 472         }
 473
 474         local_irq_restore(flags);
 475 }
 476
 477 /* from pxafb.c */
 478 static inline unsigned int chan_to_field(unsigned int chan,
 479                                          struct fb_bitfield *bf)
 480 {
 481         chan &= 0xffff;
 482         chan >>= 16 - bf->length;
 483         return chan << bf->offset;
 484 }
 485
 486 static int s3c2410fb_setcolreg(unsigned regno,
 487                                unsigned red, unsigned green, unsigned blue,
 488                                unsigned transp, struct fb_info *info)
 489 {
 490         struct s3c2410fb_info *fbi = info->par;
 491         void __iomem *regs = fbi->io;
 492         unsigned int val;
 493
 494         /* dprintk("setcol: regno=%d, rgb=%d,%d,%d\n",
 495                    regno, red, green, blue); */
 496
 497         switch (info->fix.visual) {
 498         case FB_VISUAL_TRUECOLOR:
 499                 /* true-colour, use pseudo-palette */
 500
 501                 if (regno < 16) {
 502                         u32 *pal = info->pseudo_palette;
 503
 504                         val  = chan_to_field(red,   &info->var.red);
 505                         val |= chan_to_field(green, &info->var.green);
 506                         val |= chan_to_field(blue,  &info->var.blue);
 507
 508                         pal[regno] = val;
 509                 }
 510                 break;
 511
 512         case FB_VISUAL_PSEUDOCOLOR:
 513                 if (regno < 256) {
 514                         /* currently assume RGB 5-6-5 mode */
 515
 516                         val  = (red   >>  0) & 0xf800;
 517                         val |= (green >>  5) & 0x07e0;
 518                         val |= (blue  >> 11) & 0x001f;
 519
 520                         writel(val, regs + S3C2410_TFTPAL(regno));
 521                         schedule_palette_update(fbi, regno, val);
 522                 }
 523
 524                 break;
 525
 526         default:
 527                 return 1;       /* unknown type */
 528         }
 529
 530         return 0;
 531 }
 532
 533 /* s3c2410fb_lcd_enable
 534  *
 535  * shutdown the lcd controller
 536  */
 537 static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
 538 {
 539         unsigned long flags;
 540
 541         local_irq_save(flags);
 542
 543         if (enable)
 544                 fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
 545         else
 546                 fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
 547
 548         writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
 549
 550         local_irq_restore(flags);
 551 }
 552
 553
 554 /*
 555  *      s3c2410fb_blank
 556  *      @blank_mode: the blank mode we want.
 557  *      @info: frame buffer structure that represents a single frame buffer
 558  *
 559  *      Blank the screen if blank_mode != 0, else unblank. Return 0 if
 560  *      blanking succeeded, != 0 if un-/blanking failed due to e.g. a
 561  *      video mode which doesn't support it. Implements VESA suspend
 562  *      and powerdown modes on hardware that supports disabling hsync/vsync:
 563  *
 564  *      Returns negative errno on error, or zero on success.
 565  *
 566  */
 567 static int s3c2410fb_blank(int blank_mode, struct fb_info *info)
 568 {
 569         struct s3c2410fb_info *fbi = info->par;
 570         void __iomem *tpal_reg = fbi->io;
 571
 572         dprintk("blank(mode=%d, info=%p)\n", blank_mode, info);
 573
 574         tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
 575
 576         if (blank_mode == FB_BLANK_POWERDOWN)
 577                 s3c2410fb_lcd_enable(fbi, 0);
 578         else
 579                 s3c2410fb_lcd_enable(fbi, 1);
 580
 581         if (blank_mode == FB_BLANK_UNBLANK)
 582                 writel(0x0, tpal_reg);
 583         else {
 584                 dprintk("setting TPAL to output 0x000000\n");
 585                 writel(S3C2410_TPAL_EN, tpal_reg);
 586         }
 587
 588         return 0;
 589 }
 590
 591 static int s3c2410fb_debug_show(struct device *dev,
 592                                 struct device_attribute *attr, char *buf)
 593 {
 594         return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
 595 }
 596
 597 static int s3c2410fb_debug_store(struct device *dev,
 598                                  struct device_attribute *attr,
 599                                  const char *buf, size_t len)
 600 {
 601         if (len < 1)
 602                 return -EINVAL;
 603
 604         if (strnicmp(buf, "on", 2) == 0 ||
 605             strnicmp(buf, "1", 1) == 0) {
 606                 debug = 1;
 607                 dev_dbg(dev, "s3c2410fb: Debug On");
 608         } else if (strnicmp(buf, "off", 3) == 0 ||
 609                    strnicmp(buf, "0", 1) == 0) {
 610                 debug = 0;
 611                 dev_dbg(dev, "s3c2410fb: Debug Off");
 612         } else {
 613                 return -EINVAL;
 614         }
 615
 616         return len;
 617 }
 618
 619 static DEVICE_ATTR(debug, 0664, s3c2410fb_debug_show, s3c2410fb_debug_store);
 620
 621 static struct fb_ops s3c2410fb_ops = {
 622         .owner          = THIS_MODULE,
 623         .fb_check_var   = s3c2410fb_check_var,
 624         .fb_set_par     = s3c2410fb_set_par,
 625         .fb_blank       = s3c2410fb_blank,
 626         .fb_setcolreg   = s3c2410fb_setcolreg,
 627         .fb_fillrect    = cfb_fillrect,
 628         .fb_copyarea    = cfb_copyarea,
 629         .fb_imageblit   = cfb_imageblit,
 630 };
 631
 632 /*
 633  * s3c2410fb_map_video_memory():
 634  *      Allocates the DRAM memory for the frame buffer.  This buffer is
 635  *      remapped into a non-cached, non-buffered, memory region to
 636  *      allow palette and pixel writes to occur without flushing the
 637  *      cache.  Once this area is remapped, all virtual memory
 638  *      access to the video memory should occur at the new region.
 639  */
 640 static int s3c2410fb_map_video_memory(struct fb_info *info)
 641 {
 642         struct s3c2410fb_info *fbi = info->par;
 643         dma_addr_t map_dma;
 644         unsigned map_size = PAGE_ALIGN(info->fix.smem_len);
 645
 646         dprintk("map_video_memory(fbi=%p) map_size %u\n", fbi, map_size);
 647
 648         info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
 649                                                    &map_dma, GFP_KERNEL);
 650
 651         if (info->screen_base) {
 652                 /* prevent initial garbage on screen */
 653                 dprintk("map_video_memory: clear %p:%08x\n",
 654                         info->screen_base, map_size);
 655                 memset(info->screen_base, 0x00, map_size);
 656
 657                 info->fix.smem_start = map_dma;
 658
 659                 dprintk("map_video_memory: dma=%08lx cpu=%p size=%08x\n",
 660                         info->fix.smem_start, info->screen_base, map_size);
 661         }
 662
 663         return info->screen_base ? 0 : -ENOMEM;
 664 }
 665
 666 static inline void s3c2410fb_unmap_video_memory(struct fb_info *info)
 667 {
 668         struct s3c2410fb_info *fbi = info->par;
 669
 670         dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
 671                               info->screen_base, info->fix.smem_start);
 672 }
 673
 674 static inline void modify_gpio(void __iomem *reg,
 675                                unsigned long set, unsigned long mask)
 676 {
 677         unsigned long tmp;
 678
 679         tmp = readl(reg) & ~mask;
 680         writel(tmp | set, reg);
 681 }
 682
 683 /*
 684  * s3c2410fb_init_registers - Initialise all LCD-related registers
 685  */
 686 static int s3c2410fb_init_registers(struct fb_info *info)
 687 {
 688         struct s3c2410fb_info *fbi = info->par;
 689         struct s3c2410fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
 690         unsigned long flags;
 691         void __iomem *regs = fbi->io;
 692         void __iomem *tpal;
 693         void __iomem *lpcsel;
 694
 695         if (is_s3c2412(fbi)) {
 696                 tpal = regs + S3C2412_TPAL;
 697                 lpcsel = regs + S3C2412_TCONSEL;
 698         } else {
 699                 tpal = regs + S3C2410_TPAL;
 700                 lpcsel = regs + S3C2410_LPCSEL;
 701         }
 702
 703         /* Initialise LCD with values from haret */
 704
 705         local_irq_save(flags);
 706
 707         /* modify the gpio(s) with interrupts set (bjd) */
 708
 709         modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
 710         modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
 711         modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
 712         modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
 713
 714         local_irq_restore(flags);
 715
 716         dprintk("LPCSEL    = 0x%08lx\n", mach_info->lpcsel);
 717         writel(mach_info->lpcsel, lpcsel);
 718
 719         dprintk("replacing TPAL %08x\n", readl(tpal));
 720
 721         /* ensure temporary palette disabled */
 722         writel(0x00, tpal);
 723
 724         return 0;
 725 }
 726
 727 static void s3c2410fb_write_palette(struct s3c2410fb_info *fbi)
 728 {
 729         unsigned int i;
 730         void __iomem *regs = fbi->io;
 731
 732         fbi->palette_ready = 0;
 733
 734         for (i = 0; i < 256; i++) {
 735                 unsigned long ent = fbi->palette_buffer[i];
 736                 if (ent == PALETTE_BUFF_CLEAR)
 737                         continue;
 738
 739                 writel(ent, regs + S3C2410_TFTPAL(i));
 740
 741                 /* it seems the only way to know exactly
 742                  * if the palette wrote ok, is to check
 743                  * to see if the value verifies ok
 744                  */
 745
 746                 if (readw(regs + S3C2410_TFTPAL(i)) == ent)
 747                         fbi->palette_buffer[i] = PALETTE_BUFF_CLEAR;
 748                 else
 749                         fbi->palette_ready = 1;   /* retry */
 750         }
 751 }
 752
 753 static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
 754 {
 755         struct s3c2410fb_info *fbi = dev_id;
 756         void __iomem *irq_base = fbi->irq_base;
 757         unsigned long lcdirq = readl(irq_base + S3C24XX_LCDINTPND);
 758
 759         if (lcdirq & S3C2410_LCDINT_FRSYNC) {
 760                 if (fbi->palette_ready)
 761                         s3c2410fb_write_palette(fbi);
 762
 763                 writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDINTPND);
 764                 writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDSRCPND);
 765         }
 766
 767         return IRQ_HANDLED;
 768 }
 769
 770 #ifdef CONFIG_CPU_FREQ
 771
 772 static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
 773                                         unsigned long val, void *data)
 774 {
 775         struct s3c2410fb_info *info;
 776         struct fb_info *fbinfo;
 777         long delta_f;
 778
 779         info = container_of(nb, struct s3c2410fb_info, freq_transition);
 780         fbinfo = platform_get_drvdata(to_platform_device(info->dev));
 781
 782         /* work out change, <0 for speed-up */
 783         delta_f = info->clk_rate - clk_get_rate(info->clk);
 784
 785         if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
 786             (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
 787                 info->clk_rate = clk_get_rate(info->clk);
 788                 s3c2410fb_activate_var(fbinfo);
 789         }
 790
 791         return 0;
 792 }
 793
 794 static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
 795 {
 796         info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
 797
 798         return cpufreq_register_notifier(&info->freq_transition,
 799                                          CPUFREQ_TRANSITION_NOTIFIER);
 800 }
 801
 802 static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
 803 {
 804         cpufreq_unregister_notifier(&info->freq_transition,
 805                                     CPUFREQ_TRANSITION_NOTIFIER);
 806 }
 807
 808 #else
 809 static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
 810 {
 811         return 0;
 812 }
 813
 814 static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
 815 {
 816 }
 817 #endif
 818
 819
 820 static const char driver_name[] = "s3c2410fb";
 821
 822 static int s3c24xxfb_probe(struct platform_device *pdev,
 823                            enum s3c_drv_type drv_type)
 824 {
 825         struct s3c2410fb_info *info;
 826         struct s3c2410fb_display *display;
 827         struct fb_info *fbinfo;
 828         struct s3c2410fb_mach_info *mach_info;
 829         struct resource *res;
 830         int ret;
 831         int irq;
 832         int i;
 833         int size;
 834         u32 lcdcon1;
 835
 836         mach_info = dev_get_platdata(&pdev->dev);
 837         if (mach_info == NULL) {
 838                 dev_err(&pdev->dev,
 839                         "no platform data for lcd, cannot attach\n");
 840                 return -EINVAL;
 841         }
 842
 843         if (mach_info->default_display >= mach_info->num_displays) {
 844                 dev_err(&pdev->dev, "default is %d but only %d displays\n",
 845                         mach_info->default_display, mach_info->num_displays);
 846                 return -EINVAL;
 847         }
 848
 849         display = mach_info->displays + mach_info->default_display;
 850
 851         irq = platform_get_irq(pdev, 0);
 852         if (irq < 0) {
 853                 dev_err(&pdev->dev, "no irq for device\n");
 854                 return -ENOENT;
 855         }
 856
 857         fbinfo = framebuffer_alloc(sizeof(struct s3c2410fb_info), &pdev->dev);
 858         if (!fbinfo)
 859                 return -ENOMEM;
 860
 861         platform_set_drvdata(pdev, fbinfo);
 862
 863         info = fbinfo->par;
 864         info->dev = &pdev->dev;
 865         info->drv_type = drv_type;
 866
 867         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 868         if (res == NULL) {
 869                 dev_err(&pdev->dev, "failed to get memory registers\n");
 870                 ret = -ENXIO;
 871                 goto dealloc_fb;
 872         }
 873
 874         size = resource_size(res);
 875         info->mem = request_mem_region(res->start, size, pdev->name);
 876         if (info->mem == NULL) {
 877                 dev_err(&pdev->dev, "failed to get memory region\n");
 878                 ret = -ENOENT;
 879                 goto dealloc_fb;
 880         }
 881
 882         info->io = ioremap(res->start, size);
 883         if (info->io == NULL) {
 884                 dev_err(&pdev->dev, "ioremap() of registers failed\n");
 885                 ret = -ENXIO;
 886                 goto release_mem;
 887         }
 888
 889         if (drv_type == DRV_S3C2412)
 890                 info->irq_base = info->io + S3C2412_LCDINTBASE;
 891         else
 892                 info->irq_base = info->io + S3C2410_LCDINTBASE;
 893
 894         dprintk("devinit\n");
 895
 896         strcpy(fbinfo->fix.id, driver_name);
 897
 898         /* Stop the video */
 899         lcdcon1 = readl(info->io + S3C2410_LCDCON1);
 900         writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, info->io + S3C2410_LCDCON1);
 901
 902         fbinfo->fix.type            = FB_TYPE_PACKED_PIXELS;
 903         fbinfo->fix.type_aux        = 0;
 904         fbinfo->fix.xpanstep        = 0;
 905         fbinfo->fix.ypanstep        = 0;
 906         fbinfo->fix.ywrapstep       = 0;
 907         fbinfo->fix.accel           = FB_ACCEL_NONE;
 908
 909         fbinfo->var.nonstd          = 0;
 910         fbinfo->var.activate        = FB_ACTIVATE_NOW;
 911         fbinfo->var.accel_flags     = 0;
 912         fbinfo->var.vmode           = FB_VMODE_NONINTERLACED;
 913
 914         fbinfo->fbops               = &s3c2410fb_ops;
 915         fbinfo->flags               = FBINFO_FLAG_DEFAULT;
 916         fbinfo->pseudo_palette      = &info->pseudo_pal;
 917
 918         for (i = 0; i < 256; i++)
 919                 info->palette_buffer[i] = PALETTE_BUFF_CLEAR;
 920
 921         ret = request_irq(irq, s3c2410fb_irq, 0, pdev->name, info);
 922         if (ret) {
 923                 dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
 924                 ret = -EBUSY;
 925                 goto release_regs;
 926         }
 927
 928         info->clk = clk_get(NULL, "lcd");
 929         if (IS_ERR(info->clk)) {
 930                 dev_err(&pdev->dev, "failed to get lcd clock source\n");
 931                 ret = PTR_ERR(info->clk);
 932                 goto release_irq;
 933         }
 934
 935         clk_prepare_enable(info->clk);
 936         dprintk("got and enabled clock\n");
 937
 938         usleep_range(1000, 1100);
 939
 940         info->clk_rate = clk_get_rate(info->clk);
 941
 942         /* find maximum required memory size for display */
 943         for (i = 0; i < mach_info->num_displays; i++) {
 944                 unsigned long smem_len = mach_info->displays[i].xres;
 945
 946                 smem_len *= mach_info->displays[i].yres;
 947                 smem_len *= mach_info->displays[i].bpp;
 948                 smem_len >>= 3;
 949                 if (fbinfo->fix.smem_len < smem_len)
 950                         fbinfo->fix.smem_len = smem_len;
 951         }
 952
 953         /* Initialize video memory */
 954         ret = s3c2410fb_map_video_memory(fbinfo);
 955         if (ret) {
 956                 dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
 957                 ret = -ENOMEM;
 958                 goto release_clock;
 959         }
 960
 961         dprintk("got video memory\n");
 962
 963         fbinfo->var.xres = display->xres;
 964         fbinfo->var.yres = display->yres;
 965         fbinfo->var.bits_per_pixel = display->bpp;
 966
 967         s3c2410fb_init_registers(fbinfo);
 968
 969         s3c2410fb_check_var(&fbinfo->var, fbinfo);
 970
 971         ret = s3c2410fb_cpufreq_register(info);
 972         if (ret < 0) {
 973                 dev_err(&pdev->dev, "Failed to register cpufreq\n");
 974                 goto free_video_memory;
 975         }
 976
 977         ret = register_framebuffer(fbinfo);
 978         if (ret < 0) {
 979                 dev_err(&pdev->dev, "Failed to register framebuffer device: %d\n",
 980                         ret);
 981                 goto free_cpufreq;
 982         }
 983
 984         /* create device files */
 985         ret = device_create_file(&pdev->dev, &dev_attr_debug);
 986         if (ret)
 987                 dev_err(&pdev->dev, "failed to add debug attribute\n");
 988
 989         dev_info(&pdev->dev, "fb%d: %s frame buffer device\n",
 990                 fbinfo->node, fbinfo->fix.id);
 991
 992         return 0;
 993
 994  free_cpufreq:
 995         s3c2410fb_cpufreq_deregister(info);
 996 free_video_memory:
 997         s3c2410fb_unmap_video_memory(fbinfo);
 998 release_clock:
 999         clk_disable_unprepare(info->clk);
1000         clk_put(info->clk);
1001 release_irq:
1002         free_irq(irq, info);
1003 release_regs:
1004         iounmap(info->io);
1005 release_mem:
1006         release_mem_region(res->start, size);
1007 dealloc_fb:
1008         framebuffer_release(fbinfo);
1009         return ret;
1010 }
1011
1012 static int s3c2410fb_probe(struct platform_device *pdev)
1013 {
1014         return s3c24xxfb_probe(pdev, DRV_S3C2410);
1015 }
1016
1017 static int s3c2412fb_probe(struct platform_device *pdev)
1018 {
1019         return s3c24xxfb_probe(pdev, DRV_S3C2412);
1020 }
1021
1022
1023 /*
1024  *  Cleanup
1025  */
1026 static int s3c2410fb_remove(struct platform_device *pdev)
1027 {
1028         struct fb_info *fbinfo = platform_get_drvdata(pdev);
1029         struct s3c2410fb_info *info = fbinfo->par;
1030         int irq;
1031
1032         unregister_framebuffer(fbinfo);
1033         s3c2410fb_cpufreq_deregister(info);
1034
1035         s3c2410fb_lcd_enable(info, 0);
1036         usleep_range(1000, 1100);
1037
1038         s3c2410fb_unmap_video_memory(fbinfo);
1039
1040         if (info->clk) {
1041                 clk_disable_unprepare(info->clk);
1042                 clk_put(info->clk);
1043                 info->clk = NULL;
1044         }
1045
1046         irq = platform_get_irq(pdev, 0);
1047         free_irq(irq, info);
1048
1049         iounmap(info->io);
1050
1051         release_mem_region(info->mem->start, resource_size(info->mem));
1052
1053         framebuffer_release(fbinfo);
1054
1055         return 0;
1056 }
1057
1058 #ifdef CONFIG_PM
1059
1060 /* suspend and resume support for the lcd controller */
1061 static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state)
1062 {
1063         struct fb_info     *fbinfo = platform_get_drvdata(dev);
1064         struct s3c2410fb_info *info = fbinfo->par;
1065
1066         s3c2410fb_lcd_enable(info, 0);
1067
1068         /* sleep before disabling the clock, we need to ensure
1069          * the LCD DMA engine is not going to get back on the bus
1070          * before the clock goes off again (bjd) */
1071
1072         usleep_range(1000, 1100);
1073         clk_disable_unprepare(info->clk);
1074
1075         return 0;
1076 }
1077
1078 static int s3c2410fb_resume(struct platform_device *dev)
1079 {
1080         struct fb_info     *fbinfo = platform_get_drvdata(dev);
1081         struct s3c2410fb_info *info = fbinfo->par;
1082
1083         clk_prepare_enable(info->clk);
1084         usleep_range(1000, 1100);
1085
1086         s3c2410fb_init_registers(fbinfo);
1087
1088         /* re-activate our display after resume */
1089         s3c2410fb_activate_var(fbinfo);
1090         s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
1091
1092         return 0;
1093 }
1094
1095 #else
1096 #define s3c2410fb_suspend NULL
1097 #define s3c2410fb_resume  NULL
1098 #endif
1099
1100 static struct platform_driver s3c2410fb_driver = {
1101         .probe          = s3c2410fb_probe,
1102         .remove         = s3c2410fb_remove,
1103         .suspend        = s3c2410fb_suspend,
1104         .resume         = s3c2410fb_resume,
1105         .driver         = {
1106                 .name   = "s3c2410-lcd",
1107                 .owner  = THIS_MODULE,
1108         },
1109 };
1110
1111 static struct platform_driver s3c2412fb_driver = {
1112         .probe          = s3c2412fb_probe,
1113         .remove         = s3c2410fb_remove,
1114         .suspend        = s3c2410fb_suspend,
1115         .resume         = s3c2410fb_resume,
1116         .driver         = {
1117                 .name   = "s3c2412-lcd",
1118                 .owner  = THIS_MODULE,
1119         },
1120 };
1121
1122 int __init s3c2410fb_init(void)
1123 {
1124         int ret = platform_driver_register(&s3c2410fb_driver);
1125
1126         if (ret == 0)
1127                 ret = platform_driver_register(&s3c2412fb_driver);
1128
1129         return ret;
1130 }
1131
1132 static void __exit s3c2410fb_cleanup(void)
1133 {
1134         platform_driver_unregister(&s3c2410fb_driver);
1135         platform_driver_unregister(&s3c2412fb_driver);
1136 }
1137
1138 module_init(s3c2410fb_init);
1139 module_exit(s3c2410fb_cleanup);
1140
1141 MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
1142 MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
1143 MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
1144 MODULE_LICENSE("GPL");
1145 MODULE_ALIAS("platform:s3c2410-lcd");
1146 MODULE_ALIAS("platform:s3c2412-lcd");