drivers/video/cyblafb.c

   1 /*
   2  * Frame buffer driver for Trident Cyberblade/i1 graphics core
   3  *
   4  * Copyright 2005 Knut Petersen <Knut_Petersen@t-online.de>
   5  *
   6  * CREDITS:
   7  *      tridentfb.c by Jani Monoses
   8  *      see files above for further credits
   9  *
  10  * TODO:
  11  *
  12  */
  13
  14 #define CYBLAFB_DEBUG 0
  15
  16 #include <linux/config.h>
  17 #include <linux/module.h>
  18 #include <linux/string.h>
  19 #include <linux/fb.h>
  20 #include <linux/init.h>
  21 #include <linux/pci.h>
  22 #include <asm/types.h>
  23 #include <video/cyblafb.h>
  24
  25 #define VERSION "0.54"
  26
  27 struct cyblafb_par {
  28         u32 pseudo_pal[16];
  29         struct fb_ops ops;
  30 };
  31
  32 static struct fb_fix_screeninfo cyblafb_fix __devinitdata = {
  33         .id = "CyBla",
  34         .type = FB_TYPE_PACKED_PIXELS,
  35         .ypanstep = 1,
  36         .visual = FB_VISUAL_PSEUDOCOLOR,
  37         .accel = FB_ACCEL_NONE,
  38 };
  39
  40 static char *mode __devinitdata = NULL;
  41 static int bpp __devinitdata = 8;
  42 static int ref __devinitdata = 75;
  43 static int fp __devinitdata;
  44 static int crt __devinitdata;
  45 static int memsize __devinitdata;
  46 static int vesafb __devinitdata;
  47
  48 static int nativex;
  49 static int center;
  50 static int stretch;
  51 static int pciwb = 1;
  52 static int pcirb = 1;
  53 static int pciwr = 1;
  54 static int pcirr = 1;
  55 static int verbosity;
  56 static int displaytype;
  57
  58 static void __iomem * io_virt; // iospace virtual memory address
  59
  60 module_param(mode,charp,0);
  61 module_param(bpp,int,0);
  62 module_param(ref,int,0);
  63 module_param(fp,int,0);
  64 module_param(crt,int,0);
  65 module_param(nativex,int,0);
  66 module_param(center,int,0);
  67 module_param(stretch,int,0);
  68 module_param(pciwb,int,0);
  69 module_param(pcirb,int,0);
  70 module_param(pciwr,int,0);
  71 module_param(pcirr,int,0);
  72 module_param(memsize,int,0);
  73 module_param(verbosity,int,0);
  74 module_param(vesafb,int,0);
  75
  76 //=========================================
  77 //
  78 // Port access macros for memory mapped io
  79 //
  80 //=========================================
  81
  82 #define out8(r,v) writeb(v,io_virt+r)
  83 #define out32(r,v) writel(v,io_virt+r)
  84 #define in8(r) readb(io_virt+r)
  85 #define in32(r) readl(io_virt+r)
  86
  87 //======================================
  88 //
  89 // Hardware access inline functions
  90 //
  91 //======================================
  92
  93 static inline unsigned char read3X4(int reg)
  94 {
  95         out8(0x3D4,reg);
  96         return in8(0x3D5);
  97 }
  98
  99 static inline unsigned char read3C4(int reg)
 100 {
 101         out8(0x3C4,reg);
 102         return in8(0x3C5);
 103 }
 104
 105 static inline unsigned char read3CE(int reg)
 106 {
 107         out8(0x3CE,reg);
 108         return in8(0x3CF);
 109 }
 110
 111 static inline void write3X4(int reg,unsigned char val)
 112 {
 113         out8(0x3D4,reg);
 114         out8(0x3D5,val);
 115 }
 116
 117 static inline void write3C4(int reg,unsigned char val)
 118 {
 119         out8(0x3C4,reg);
 120         out8(0x3C5,val);
 121 }
 122
 123 static inline void write3CE(int reg,unsigned char val)
 124 {
 125         out8(0x3CE,reg);
 126         out8(0x3CF,val);
 127 }
 128
 129 static inline void write3C0(int reg,unsigned char val)
 130 {
 131         in8(0x3DA);     // read to reset index
 132         out8(0x3C0,reg);
 133         out8(0x3C0,val);
 134 }
 135
 136 //=================================================
 137 //
 138 // Enable memory mapped io and unprotect registers
 139 //
 140 //=================================================
 141
 142 static inline void enable_mmio(void)
 143 {
 144         int tmp;
 145
 146         outb(0x0B,0x3C4);
 147         inb(0x3C5);             // Set NEW mode
 148         outb(SR0E,0x3C4);       // write enable a lot of extended ports
 149         outb(0x80,0x3C5);
 150
 151         outb(SR11,0x3C4);       // write enable those extended ports that
 152         outb(0x87,0x3C5);       // are not affected by SR0E_New
 153
 154         outb(CR1E,0x3d4);       // clear write protect bit for port 0x3c2
 155         tmp=inb(0x3d5) & 0xBF;
 156         outb(CR1E,0x3d4);
 157         outb(tmp,0x3d5);
 158
 159         outb(CR39,0x3D4);
 160         outb(inb(0x3D5)|0x01,0x3D5); // Enable mmio, everything else untouched
 161 }
 162
 163 //=================================================
 164 //
 165 // Set pixel clock VCLK1
 166 //   - multipliers set elswhere
 167 //   - freq in units of 0.01 MHz
 168 //
 169 //=================================================
 170
 171 static void set_vclk(struct cyblafb_par *par, int freq)
 172 {
 173         u32 m,n,k;
 174         int f,fi,d,di;
 175         u8 lo=0,hi=0;
 176
 177         d = 2000;
 178         k = freq >= 10000 ? 0 : freq >= 5000 ? 1 : freq >= 2500 ? 2 : 3;
 179         for(m = 0;m<64;m++)
 180         for(n = 0;n<250;n++) { // max 249 is a hardware limit for cybla/i1 !
 181                 fi = (int)(((5864727*(n+8))/((m+2)*(1<<k)))>>12);
 182                 if ((di = abs(fi - freq)) < d) {
 183                         d = di;
 184                         f = fi;
 185                         lo = (u8) n;
 186                         hi = (u8) ((k<<6) | m);
 187                 }
 188         }
 189         write3C4(SR19,hi);
 190         write3C4(SR18,lo);
 191         if(verbosity > 1)
 192                 output("pixclock = %d.%02d MHz, k/m/n %x %x %x\n",
 193                 freq/100,freq%100,(hi&0xc0)>>6,hi&0x3f,lo);
 194 }
 195
 196 //================================================
 197 //
 198 // Cyberblade specific Graphics Engine (GE) setup
 199 //
 200 //================================================
 201
 202 static void cyblafb_setup_GE(int pitch,int bpp)
 203 {
 204         int base = (pitch>>3)<<20;
 205
 206         switch (bpp) {
 207                 case  8: base |= (0<<29); break;
 208                 case 15: base |= (5<<29); break;
 209                 case 16: base |= (1<<29); break;
 210                 case 24:
 211                 case 32: base |= (2<<29); break;
 212         }
 213
 214         write3X4(CR36,0x90);    // reset GE
 215         write3X4(CR36,0x80);    // enable GE
 216
 217         out32(GE24,1<<7);       // reset all GE pointers
 218         out32(GE24,0);
 219
 220         write3X4(CR2D,0x00);    // GE Timinigs, no delays
 221
 222         out32(GEB8,base); // Destination Stride / Buffer Base 0, p 133
 223         out32(GEBC,base); // Destination Stride / Buffer Base 1, p 133
 224         out32(GEC0,base); // Destination Stride / Buffer Base 2, p 133
 225         out32(GEC4,base); // Destination Stride / Buffer Base 3, p 133
 226         out32(GEC8,base); // Source Stride / Buffer Base 0, p 133
 227         out32(GECC,base); // Source Stride / Buffer Base 1, p 133
 228         out32(GED0,base); // Source Stride / Buffer Base 2, p 133
 229         out32(GED4,base); // Source Stride / Buffer Base 3, p 133
 230         out32(GE6C,0);    // Pattern and Style, p 129, ok
 231 }
 232
 233 //=====================================================================
 234 //
 235 // Although this is a .fb_sync function that could be enabled in
 236 // cyblafb_ops, we do not include it there. We sync immediately before
 237 // new GE operations to improve performance.
 238 //
 239 //=====================================================================
 240
 241 static int cyblafb_sync(struct fb_info *info)
 242 {
 243         int status, i=100000;
 244         while( ((status=in32(GE20)) & 0xFA800000) && i != 0)
 245                 i--;
 246
 247         if (i == 0) {
 248                 // The timeout might be caused by disabled mmio.
 249                 // Cause:
 250                 //   - bit CR39 & 1 == 0 upon return, X trident driver bug
 251                 //   - kdm bug (KD_GRAPHICS not set on first switch)
 252                 //   - kernel design flaw (it believes in the correctness
 253                 //     of kdm/X
 254                 // So we make sure that mmio is enabled first ...
 255                 enable_mmio();
 256 //              show_trace(NULL,&status);
 257                 i=1000000;
 258                 while( ((status=in32(GE20)) & 0xFA800000) && i != 0)
 259                         i--;
 260                 if (i == 0) {
 261                         output("GE Timeout, status: %x\n",status);
 262                         if(status & 0x80000000)
 263                                 output("Bresenham Engine : Busy\n");
 264                         if(status & 0x40000000)
 265                                 output("Setup Engine     : Busy\n");
 266                         if(status & 0x20000000)
 267                                 output("SP / DPE         : Busy\n");
 268                         if(status & 0x10000000)
 269                                 output("Memory Interface : Busy\n");
 270                         if(status & 0x08000000)
 271                                 output("Com Lst Proc     : Busy\n");
 272                         if(status & 0x04000000)
 273                                 output("Block Write      : Busy\n");
 274                         if(status & 0x02000000)
 275                                 output("Command Buffer   : Full\n");
 276                         if(status & 0x01000000)
 277                                 output("RESERVED         : Busy\n");
 278                         if(status & 0x00800000)
 279                                 output("PCI Write Buffer : Busy\n");
 280                         cyblafb_setup_GE(info->var.xres,
 281                                          info->var.bits_per_pixel);
 282                 }
 283         }
 284
 285         return 0;
 286 }
 287
 288 //==============================
 289 //
 290 // Cyberblade specific fillrect
 291 //
 292 //==============================
 293
 294 static void cyblafb_fillrect(struct fb_info * info,
 295                              const struct fb_fillrect *fr)
 296 {
 297         int bpp = info->var.bits_per_pixel;
 298         int col;
 299
 300         switch (bpp) {
 301                 default:
 302                 case 8: col = fr->color;
 303                         col |= col <<8;
 304                         col |= col <<16;
 305                         break;
 306                 case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
 307                          col |= col <<16;
 308                          break;
 309                 case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
 310                          break;
 311         }
 312
 313         cyblafb_sync(info);
 314
 315         out32(GE60,col);
 316         out32(GE48,fr->rop ? 0x66:ROP_S);
 317         out32(GE44,0x20000000|1<<19|1<<4|2<<2);
 318         out32(GE08,point(fr->dx,fr->dy));
 319         out32(GE0C,point(fr->dx+fr->width-1,fr->dy+fr->height-1));
 320
 321 }
 322
 323 //==============================
 324 //
 325 // Cyberblade specific copyarea
 326 //
 327 //==============================
 328
 329 static void cyblafb_copyarea(struct fb_info *info,
 330                              const struct fb_copyarea *ca)
 331 {
 332         __u32 s1,s2,d1,d2;
 333         int direction;
 334
 335         s1 = point(ca->sx,ca->sy);
 336         s2 = point(ca->sx+ca->width-1,ca->sy+ca->height-1);
 337         d1 = point(ca->dx,ca->dy);
 338         d2 = point(ca->dx+ca->width-1,ca->dy+ca->height-1);
 339         if ((ca->sy > ca->dy) || ((ca->sy == ca->dy) && (ca->sx > ca->dx)))
 340                 direction = 0;
 341         else
 342                 direction = 2;
 343
 344         cyblafb_sync(info);
 345
 346         out32(GE44,0xa0000000|1<<19|1<<2|direction);
 347         out32(GE00,direction?s2:s1);
 348         out32(GE04,direction?s1:s2);
 349         out32(GE08,direction?d2:d1);
 350         out32(GE0C,direction?d1:d2);
 351
 352 }
 353
 354 //=======================================================================
 355 //
 356 // Cyberblade specific imageblit
 357 //
 358 // Accelerated for the most usual case, blitting 1-bit deep character
 359 // character images. Everything else is passed to the generic imageblit.
 360 //
 361 //=======================================================================
 362
 363 static void cyblafb_imageblit(struct fb_info *info,
 364                               const struct fb_image *image)
 365 {
 366
 367         u32 fgcol, bgcol;
 368
 369         int i;
 370         int bpp = info->var.bits_per_pixel;
 371         int index = 0;
 372         int index_end=image->height * image->width / 8;
 373         int width_dds=image->width / 32;
 374         int width_dbs=image->width % 32;
 375
 376         if (image->depth != 1 || bpp < 8 || bpp > 32 || bpp % 8 != 0 ||
 377             image->width % 8 != 0 || image->width == 0 || image->height == 0) {
 378                 cfb_imageblit(info,image);
 379                 return;
 380         }
 381
 382         if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
 383             info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
 384                 fgcol = ((u32*)(info->pseudo_palette))[image->fg_color];
 385                 bgcol = ((u32*)(info->pseudo_palette))[image->bg_color];
 386         } else {
 387                 fgcol = image->fg_color;
 388                 bgcol = image->bg_color;
 389         }
 390
 391         switch (bpp) {
 392                 case 8:
 393                         fgcol |= fgcol <<8; fgcol |= fgcol <<16;
 394                         bgcol |= bgcol <<8; bgcol |= bgcol <<16;
 395                         break;
 396                 case 16:
 397                         fgcol |= fgcol <<16;
 398                         bgcol |= bgcol <<16;
 399                         break;
 400                 default:
 401                          break;
 402         }
 403
 404         cyblafb_sync(info);
 405
 406         out32(GE60,fgcol);
 407         out32(GE64,bgcol);
 408         out32(GE44,0xa0000000 | 1<<20 | 1<<19);
 409         out32(GE08,point(image->dx,image->dy));
 410         out32(GE0C,point(image->dx+image->width-1,image->dy+image->height-1));
 411
 412         while(index < index_end) {
 413                 for(i=0;i<width_dds;i++) {
 414                         out32(GE9C,*((u32*) ((u32)image->data + index)));
 415                         index+=4;
 416                 }
 417                 switch(width_dbs) {
 418                 case 0: break;
 419                 case 8: out32(GE9C,*((u8*)((u32)image->data+index)));
 420                         index+=1;
 421                         break;
 422                 case 16: out32(GE9C,*((u16*)((u32)image->data+index)));
 423                         index+=2;
 424                         break;
 425                 case 24: out32(GE9C,(u32)(*((u16*)((u32)image->data+index))) |
 426                                (u32)(*((u8*)((u32)image->data+index+2)))<<16);
 427                         index+=3;
 428                         break;
 429                 }
 430         }
 431 }
 432
 433 //==========================================================
 434 //
 435 // Check if video mode is acceptable. We change var->??? if
 436 // video mode is slightly off or return error otherwise.
 437 // info->??? must not be changed!
 438 //
 439 //==========================================================
 440
 441 static int cyblafb_check_var(struct fb_var_screeninfo *var,
 442                              struct fb_info *info)
 443 {
 444         int bpp = var->bits_per_pixel;
 445         int s,t,maxvyres;
 446
 447         //
 448         // we try to support 8, 16, 24 and 32 bpp modes,
 449         // default to 8
 450         //
 451         // there is a 24 bpp mode, but for now we change requests to 32 bpp
 452         // (This is what tridentfb does ... will be changed in the future)
 453         //
 454         //
 455         if ( bpp % 8 != 0 || bpp < 8 || bpp >32)
 456                 bpp = 8;
 457         if (bpp == 24 )
 458                 bpp = var->bits_per_pixel = 32;
 459
 460         //
 461         // interlaced modes are broken, fail if one is requested
 462         //
 463         if (var->vmode & FB_VMODE_INTERLACED)
 464                 return -EINVAL;
 465
 466         //
 467         // fail if requested resolution is higher than physical
 468         // flatpanel resolution
 469         //
 470         if ((displaytype == DISPLAY_FP) && nativex && var->xres > nativex)
 471                 return -EINVAL;
 472
 473         //
 474         // xres != xres_virtual is broken, fail if such an
 475         // unusual mode is requested
 476         //
 477         if (var->xres != var->xres_virtual)
 478                 return -EINVAL;
 479
 480         //
 481         // we do not allow vclk to exceed 230 MHz
 482         //
 483         if ((bpp==32 ? 200000000 : 100000000) / var->pixclock > 23000)
 484                 return -EINVAL;
 485
 486         //
 487         // calc max yres_virtual that would fit in memory
 488         // and max yres_virtual that could be used for scrolling
 489         // and use minimum of the results as maxvyres
 490         //
 491         // adjust vyres_virtual to maxvyres if necessary
 492         // fail if requested yres is bigger than maxvyres
 493         //
 494         s = (0x1fffff / (var->xres * bpp/8)) + var->yres;
 495         t = info->fix.smem_len / (var->xres * bpp/8);
 496         maxvyres = t < s ? t : s;
 497         if (maxvyres < var->yres_virtual)
 498                 var->yres_virtual=maxvyres;
 499         if (maxvyres < var->yres)
 500                 return -EINVAL;
 501
 502         switch (bpp) {
 503                 case 8:
 504                         var->red.offset = 0;
 505                         var->green.offset = 0;
 506                         var->blue.offset = 0;
 507                         var->red.length = 6;
 508                         var->green.length = 6;
 509                         var->blue.length = 6;
 510                         break;
 511                 case 16:
 512                         var->red.offset = 11;
 513                         var->green.offset = 5;
 514                         var->blue.offset = 0;
 515                         var->red.length = 5;
 516                         var->green.length = 6;
 517                         var->blue.length = 5;
 518                         break;
 519                 case 32:
 520                         var->red.offset = 16;
 521                         var->green.offset = 8;
 522                         var->blue.offset = 0;
 523                         var->red.length = 8;
 524                         var->green.length = 8;
 525                         var->blue.length = 8;
 526                         break;
 527                 default:
 528                         return -EINVAL;
 529         }
 530
 531         return 0;
 532
 533 }
 534
 535 //=====================================================================
 536 //
 537 // Pan the display
 538 //
 539 // The datasheets defines crt start address to be 20 bits wide and
 540 // to be programmed to CR0C, CR0D, CR1E and CR27. Actually there is
 541 // CR2B[5] as an undocumented extension bit. Epia BIOS 2.07 does use
 542 // it, so it is also safe to be used here. BTW: datasheet CR0E on page
 543 // 90 really is CR1E, the real CRE is documented on page 72.
 544 //
 545 //=====================================================================
 546
 547 static int cyblafb_pan_display(struct fb_var_screeninfo *var,
 548                                struct fb_info *info)
 549 {
 550         unsigned int offset;
 551
 552         offset=(var->xoffset+(var->yoffset*var->xres))*var->bits_per_pixel/32;
 553         info->var.xoffset = var->xoffset;
 554         info->var.yoffset = var->yoffset;
 555
 556         write3X4(CR0D,offset & 0xFF);
 557         write3X4(CR0C,(offset & 0xFF00) >> 8);
 558         write3X4(CR1E,(read3X4(CR1E) & 0xDF) | ((offset & 0x10000) >> 11));
 559         write3X4(CR27,(read3X4(CR27) & 0xF8) | ((offset & 0xE0000) >> 17));
 560         write3X4(CR2B,(read3X4(CR2B) & 0xDF) | ((offset & 0x100000) >> 15));
 561
 562         return 0;
 563 }
 564
 565 //============================================
 566 //
 567 // This will really help in case of a bug ...
 568 // dump most gaphics core registers.
 569 //
 570 //============================================
 571
 572 static void regdump(struct cyblafb_par *par)
 573 {
 574         int i;
 575
 576         if (verbosity < 2)
 577                 return;
 578
 579         printk("\n");
 580         for(i=0; i<=0xff; i++) {
 581                 outb(i,0x3d4);
 582                 printk("CR%02x=%02x ",i,inb(0x3d5));
 583                 if (i%16==15)
 584                         printk("\n");
 585         }
 586
 587         outb(0x30,0x3ce);
 588         outb(inb(0x3cf) | 0x40,0x3cf);
 589         for(i=0; i<=0x1f; i++) {
 590                 if (i==0 || (i>2 && i<8) || i==0x10 || i==0x11 || i==0x16) {
 591                         outb(i,0x3d4);
 592                         printk("CR%02x=%02x ",i,inb(0x3d5));
 593                 } else
 594                         printk("------- ");
 595                 if (i%16==15)
 596                         printk("\n");
 597         }
 598         outb(0x30,0x3ce);
 599         outb(inb(0x3cf) & 0xbf,0x3cf);
 600
 601         printk("\n");
 602         for(i=0; i<=0x7f; i++) {
 603                 outb(i,0x3ce);
 604                 printk("GR%02x=%02x ",i,inb(0x3cf));
 605                 if (i%16==15)
 606                         printk("\n");
 607         }
 608
 609         printk("\n");
 610         for(i=0; i<=0xff; i++) {
 611                 outb(i,0x3c4);
 612                 printk("SR%02x=%02x ",i,inb(0x3c5));
 613                 if (i%16==15)
 614                         printk("\n");
 615         }
 616
 617         printk("\n");
 618         for(i=0; i <= 0x1F; i++) {
 619                 inb(0x3da); // next access is index!
 620                 outb(i,0x3c0);
 621                 printk("AR%02x=%02x ",i,inb(0x3c1));
 622                 if (i%16==15)
 623                         printk("\n");
 624         }
 625         printk("\n");
 626
 627         inb(0x3DA);                     // reset internal flag to 3c0 index
 628         outb(0x20,0x3C0);               // enable attr
 629
 630         return;
 631 }
 632
 633 //======================================
 634 //
 635 // Set hardware to requested video mode
 636 //
 637 //======================================
 638
 639 static int cyblafb_set_par(struct fb_info *info)
 640 {
 641         struct cyblafb_par *par = info->par;
 642         u32
 643         htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,preendfetch,
 644                 vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend;
 645         struct fb_var_screeninfo *var = &info->var;
 646         int bpp = var->bits_per_pixel;
 647         int i;
 648
 649         if (verbosity > 0)
 650                 output("Switching to new mode: "
 651                        "fbset -g %d %d %d %d %d -t %d %d %d %d %d %d %d\n",
 652                         var->xres,var->yres,var->xres_virtual,
 653                         var->yres_virtual,var->bits_per_pixel,var->pixclock,
 654                         var->left_margin,var->right_margin,var->upper_margin,
 655                         var->lower_margin,var->hsync_len,var->vsync_len);
 656
 657         htotal = (var->xres + var->left_margin + var->right_margin +
 658                                                  var->hsync_len) / 8 - 5;
 659         hdispend = var->xres/8 - 1;
 660         hsyncstart = (var->xres + var->right_margin)/8;
 661         hsyncend = var->hsync_len/8;
 662         hblankstart = hdispend + 1;
 663         hblankend = htotal + 3; // should be htotal + 5, bios does it this way
 664         preendfetch = ((var->xres >> 3) + 1) * ((bpp+1) >> 3);
 665
 666         vtotal = var->yres + var->upper_margin + var->lower_margin +
 667                                                  var->vsync_len - 2;
 668         vdispend = var->yres - 1;
 669         vsyncstart = var->yres + var->lower_margin;
 670         vblankstart = var->yres;
 671         vblankend = vtotal; // should be vtotal + 2, but bios does it this way
 672         vsyncend = var->vsync_len;
 673
 674         enable_mmio();          // necessary! ... check X ...
 675
 676         write3X4(CR11,read3X4(CR11) & 0x7F); // unlock cr00 .. cr07
 677
 678         write3CE(GR30,8);
 679
 680         if ((displaytype == DISPLAY_FP) && var->xres < nativex) {
 681
 682                 // stretch or center ?
 683
 684                 out8(0x3C2,0xEB);
 685
 686                 write3CE(GR30,read3CE(GR30) | 0x81); // shadow mode on
 687
 688                 if (center) {
 689                         write3CE(GR52,(read3CE(GR52) & 0x7C) | 0x80);
 690                         write3CE(GR53,(read3CE(GR53) & 0x7C) | 0x80);
 691                 }
 692                 else if (stretch) {
 693                         write3CE(GR5D,0);
 694                         write3CE(GR52,(read3CE(GR52) & 0x7C) | 1);
 695                         write3CE(GR53,(read3CE(GR53) & 0x7C) | 1);
 696                 }
 697
 698         } else {
 699                 out8(0x3C2,0x2B);
 700                 write3CE(GR30,8);
 701         }
 702
 703         //
 704         // Setup CRxx regs
 705         //
 706
 707         write3X4(CR00,htotal & 0xFF);
 708         write3X4(CR01,hdispend & 0xFF);
 709         write3X4(CR02,hblankstart & 0xFF);
 710         write3X4(CR03,hblankend & 0x1F);
 711         write3X4(CR04,hsyncstart & 0xFF);
 712         write3X4(CR05,(hsyncend & 0x1F) | ((hblankend & 0x20)<<2));
 713         write3X4(CR06,vtotal & 0xFF);
 714         write3X4(CR07,(vtotal & 0x100) >> 8 |
 715                       (vdispend & 0x100) >> 7 |
 716                       (vsyncstart & 0x100) >> 6 |
 717                       (vblankstart & 0x100) >> 5 |
 718                       0x10 |
 719                       (vtotal & 0x200) >> 4 |
 720                       (vdispend & 0x200) >> 3 |
 721                       (vsyncstart & 0x200) >> 2);
 722         write3X4(CR08,0);
 723         write3X4(CR09,(vblankstart & 0x200) >> 4 | 0x40 |  // FIX !!!
 724                       ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0));
 725         write3X4(CR0A,0);  // Init to some reasonable default
 726         write3X4(CR0B,0);  // Init to some reasonable default
 727         write3X4(CR0C,0);  // Offset 0
 728         write3X4(CR0D,0);  // Offset 0
 729         write3X4(CR0E,0);  // Init to some reasonable default
 730         write3X4(CR0F,0);  // Init to some reasonable default
 731         write3X4(CR10,vsyncstart & 0xFF);
 732         write3X4(CR11,(vsyncend & 0x0F));
 733         write3X4(CR12,vdispend & 0xFF);
 734         write3X4(CR13,((info->var.xres * bpp)/(4*16)) & 0xFF);
 735         write3X4(CR14,0x40);  // double word mode
 736         write3X4(CR15,vblankstart & 0xFF);
 737         write3X4(CR16,vblankend & 0xFF);
 738         write3X4(CR17,0xC3);
 739         write3X4(CR18,0xFF);
 740         //       CR19: needed for interlaced modes ... ignore it for now
 741         write3X4(CR1A,0x07); // Arbitration Control Counter 1
 742         write3X4(CR1B,0x07); // Arbitration Control Counter 2
 743         write3X4(CR1C,0x07); // Arbitration Control Counter 3
 744         write3X4(CR1D,0x00); // Don't know, doesn't hurt ;-)
 745         write3X4(CR1E,(info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80);
 746         //       CR1F: do not set, contains BIOS info about memsize
 747         write3X4(CR20,0x20); // enabe wr buf, disable 16bit planar mode
 748         write3X4(CR21,0x20); // enable linear memory access
 749         //       CR22: RO cpu latch readback
 750         //       CR23: ???
 751         //       CR24: RO AR flag state
 752         //       CR25: RAMDAC rw timing, pclk buffer tristate control ????
 753         //       CR26: ???
 754         write3X4(CR27,(vdispend & 0x400) >> 6 |
 755                       (vsyncstart & 0x400) >> 5 |
 756                       (vblankstart & 0x400) >> 4 |
 757                       (vtotal & 0x400) >> 3 |
 758                       0x8);
 759         //       CR28: ???
 760         write3X4(CR29,(read3X4(CR29) & 0xCF) |
 761                       ((((info->var.xres * bpp) / (4*16)) & 0x300) >>4));
 762         write3X4(CR2A,read3X4(CR2A) | 0x40);
 763         write3X4(CR2B,(htotal & 0x100) >> 8 |
 764                       (hdispend & 0x100) >> 7 |
 765                       // (0x00 & 0x100) >> 6 |   hinterlace para bit 8 ???
 766                       (hsyncstart & 0x100) >> 5 |
 767                       (hblankstart & 0x100) >> 4);
 768         //       CR2C: ???
 769         //       CR2D: initialized in cyblafb_setup_GE()
 770         write3X4(CR2F,0x92); // conservative, better signal quality
 771         //       CR30: reserved
 772         //       CR31: reserved
 773         //       CR32: reserved
 774         //       CR33: reserved
 775         //       CR34: disabled in CR36
 776         //       CR35: disabled in CR36
 777         //       CR36: initialized in cyblafb_setup_GE
 778         //       CR37: i2c, ignore for now
 779         write3X4(CR38,(bpp == 8) ? 0x00 :       //
 780                       (bpp == 16) ? 0x05 :      // highcolor
 781                       (bpp == 24) ? 0x29 :      // packed 24bit truecolor
 782                       (bpp == 32) ? 0x09 : 0);  // truecolor, 16 bit pixelbus
 783         write3X4(CR39,0x01 |                    // MMIO enable
 784                       (pcirb ? 0x02 : 0) | // pci read burst enable
 785                       (pciwb ? 0x04 : 0)); // pci write burst enable
 786         write3X4(CR55,0x1F | // pci clocks * 2 for STOP# during 1st data phase
 787                       (pcirr ? 0x40 : 0) | // pci read retry enable
 788                       (pciwr ? 0x80 : 0)); // pci write retry enable
 789         write3X4(CR56,preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01)|2 : 0);
 790         write3X4(CR57,preendfetch >> 8 < 2 ? preendfetch & 0xff : 0);
 791         write3X4(CR58,0x82);    // Bios does this .... don't know more
 792         //
 793         // Setup SRxx regs
 794         //
 795         write3C4(SR00,3);
 796         write3C4(SR01,1);       //set char clock 8 dots wide
 797         write3C4(SR02,0x0F);    //enable 4 maps needed in chain4 mode
 798         write3C4(SR03,0);       //no character map select
 799         write3C4(SR04,0x0E);    //memory mode: ext mem, even, chain4
 800
 801         out8(0x3C4,0x0b);
 802         in8(0x3C5);             // Set NEW mode
 803         write3C4(SR0D,0x00);    // test ... check
 804
 805         set_vclk(par,(bpp==32 ? 200000000 : 100000000)/
 806                  info->var.pixclock); //SR18,SR19
 807
 808         //
 809         // Setup GRxx regs
 810         //
 811         write3CE(GR00,0x00);    // test ... check
 812         write3CE(GR01,0x00);    // test ... check
 813         write3CE(GR02,0x00);    // test ... check
 814         write3CE(GR03,0x00);    // test ... check
 815         write3CE(GR04,0x00);    // test ... check
 816         write3CE(GR05,0x40);    // no CGA compat,allow 256 col
 817         write3CE(GR06,0x05);    // graphics mode
 818         write3CE(GR07,0x0F);    // planes?
 819         write3CE(GR08,0xFF);    // test ... check
 820         write3CE(GR0F,(bpp==32)?0x1A:0x12); // div vclk by 2 if 32bpp, chain4
 821         write3CE(GR20,0xC0);    // test ... check
 822         write3CE(GR2F,0xA0);    // PCLK = VCLK, no skew,
 823
 824         //
 825         // Setup ARxx regs
 826         //
 827         for(i = 0;i < 0x10;i++) // set AR00 .. AR0f
 828                 write3C0(i,i);
 829         write3C0(AR10,0x41);    // graphics mode and support 256 color modes
 830         write3C0(AR12,0x0F);    // planes
 831         write3C0(AR13,0);       // horizontal pel panning
 832         in8(0x3DA);             // reset internal flag to 3c0 index
 833         out8(0x3C0,0x20);       // enable attr
 834
 835         //
 836         // Setup hidden RAMDAC command register
 837         //
 838         in8(0x3C8);  // these reads are
 839         in8(0x3C6);  // necessary to
 840         in8(0x3C6);  // unmask the RAMDAC
 841         in8(0x3C6);  // command reg, otherwise
 842         in8(0x3C6);  // we would write the pixelmask reg!
 843         out8(0x3C6,(bpp ==  8) ? 0x00 :         // 256 colors
 844                    (bpp == 15) ? 0x10 :         //
 845                    (bpp == 16) ? 0x30 :         // hicolor
 846                    (bpp == 24) ? 0xD0 :         // truecolor
 847                    (bpp == 32) ? 0xD0 : 0);     // truecolor
 848         in8(0x3C8);
 849
 850         //
 851         // GR31 is not mentioned in the datasheet
 852         //
 853         if (displaytype == DISPLAY_FP)
 854                 write3CE(GR31,(read3CE(GR31) & 0x8F) |
 855                          ((info->var.yres > 1024) ? 0x50 :
 856                          (info->var.yres >   768) ? 0x30 :
 857                          (info->var.yres >   600) ? 0x20 :
 858                          (info->var.yres >   480) ? 0x10 : 0));
 859
 860         info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR
 861                                       : FB_VISUAL_TRUECOLOR;
 862         info->fix.line_length = info->var.xres * (bpp >> 3);
 863         info->cmap.len = (bpp == 8) ? 256: 16;
 864
 865         //
 866         // init acceleration engine
 867         //
 868         cyblafb_setup_GE(info->var.xres,info->var.bits_per_pixel);
 869
 870         regdump(par);
 871
 872         return 0;
 873 }
 874
 875 //========================
 876 //
 877 // Set one color register
 878 //
 879 //========================
 880
 881 static int cyblafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 882                              unsigned blue, unsigned transp,
 883                              struct fb_info *info)
 884 {
 885         int bpp = info->var.bits_per_pixel;
 886
 887         if (regno >= info->cmap.len)
 888                 return 1;
 889
 890         if (bpp == 8) {
 891                 out8(0x3C6,0xFF);
 892                 out8(0x3C8,regno);
 893                 out8(0x3C9,red>>10);
 894                 out8(0x3C9,green>>10);
 895                 out8(0x3C9,blue>>10);
 896
 897         } else if (bpp == 16)                           // RGB 565
 898                 ((u32*)info->pseudo_palette)[regno] =
 899                         (red & 0xF800) |
 900                         ((green & 0xFC00) >> 5) |
 901                         ((blue & 0xF800) >> 11);
 902         else if (bpp == 32)                             // ARGB 8888
 903                 ((u32*)info->pseudo_palette)[regno] =
 904                         ((transp & 0xFF00) <<16) |
 905                         ((red & 0xFF00) << 8) |
 906                         ((green & 0xFF00)) |
 907                         ((blue & 0xFF00)>>8);
 908
 909         return 0;
 910 }
 911
 912 //==========================================================
 913 //
 914 // Try blanking the screen. For flat panels it does nothing
 915 //
 916 //==========================================================
 917
 918 static int cyblafb_blank(int blank_mode, struct fb_info *info)
 919 {
 920         unsigned char PMCont,DPMSCont;
 921
 922         if (displaytype == DISPLAY_FP)
 923                 return 0;
 924
 925         out8(0x83C8,0x04);              // DPMS Control
 926         PMCont = in8(0x83C6) & 0xFC;
 927
 928         DPMSCont = read3CE(GR23) & 0xFC;
 929
 930         switch (blank_mode)
 931         {
 932         case FB_BLANK_UNBLANK:       // Screen: On, HSync: On, VSync: On
 933         case FB_BLANK_NORMAL:        // Screen: Off, HSync: On, VSync: On
 934                 PMCont |= 0x03;
 935                 DPMSCont |= 0x00;
 936                 break;
 937         case FB_BLANK_HSYNC_SUSPEND: // Screen: Off, HSync: Off, VSync: On
 938                 PMCont |= 0x02;
 939                 DPMSCont |= 0x01;
 940                 break;
 941         case FB_BLANK_VSYNC_SUSPEND: // Screen: Off, HSync: On, VSync: Off
 942                 PMCont |= 0x02;
 943                 DPMSCont |= 0x02;
 944                 break;
 945         case FB_BLANK_POWERDOWN:     // Screen: Off, HSync: Off, VSync: Off
 946                 PMCont |= 0x00;
 947                 DPMSCont |= 0x03;
 948                 break;
 949         }
 950
 951         write3CE(GR23,DPMSCont);
 952         out8(0x83C8,4);
 953         out8(0x83C6,PMCont);
 954         //
 955         // let fbcon do a softblank for us
 956         //
 957         return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
 958 }
 959
 960 static struct fb_ops cyblafb_ops __devinitdata = {
 961         .owner  = THIS_MODULE,
 962         .fb_setcolreg = cyblafb_setcolreg,
 963         .fb_pan_display = cyblafb_pan_display,
 964         .fb_blank = cyblafb_blank,
 965         .fb_check_var = cyblafb_check_var,
 966         .fb_set_par = cyblafb_set_par,
 967         .fb_fillrect = cyblafb_fillrect,
 968         .fb_copyarea= cyblafb_copyarea,
 969         .fb_imageblit = cyblafb_imageblit,
 970         .fb_cursor = soft_cursor,
 971 };
 972
 973 //==========================================================================
 974 //
 975 // getstartupmode() decides about the inital video mode
 976 //
 977 // There is no reason to use modedb, a lot of video modes there would
 978 // need altered timings to display correctly. So I decided that it is much
 979 // better to provide a limited optimized set of modes plus the option of
 980 // using the mode in effect at startup time (might be selected using the
 981 // vga=??? paramter). After that the user might use fbset to select any
 982 // mode he likes, check_var will not try to alter geometry parameters as
 983 // it would be necessary otherwise.
 984 //
 985 //==========================================================================
 986
 987 static int __devinit getstartupmode(struct fb_info *info)
 988 {
 989         u32     htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,
 990                 vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend,
 991                 cr00,cr01,cr02,cr03,cr04,cr05,cr2b,
 992                 cr06,cr07,cr09,cr10,cr11,cr12,cr15,cr16,cr27,
 993                 cr38,
 994                 sr0d,sr18,sr19,
 995                 gr0f,
 996                 fi,pxclkdiv,vclkdiv,tmp,i;
 997
 998         struct modus {
 999                 int xres; int yres; int vyres; int bpp; int pxclk;
1000                 int left_margin; int right_margin; int upper_margin;
1001                 int lower_margin; int hsync_len; int vsync_len;
1002         }  modedb[5] = {
1003                 {   0,    0, 8000, 0, 0,   0,  0,  0, 0,   0,  0},
1004                 { 640,  480, 3756, 0, 0, -40, 24, 17, 0, 216,  3},
1005                 { 800,  600, 3221, 0, 0,  96, 24, 14, 0, 136, 11},
1006                 {1024,  768, 2815, 0, 0, 144, 24, 29, 0, 120,  3},
1007                 {1280, 1024, 2662, 0, 0, 232, 16, 39, 0, 160,  3}
1008         };
1009
1010         outb(0x00,0x3d4); cr00=inb(0x3d5); outb(0x01,0x3d4); cr01=inb(0x3d5);
1011         outb(0x02,0x3d4); cr02=inb(0x3d5); outb(0x03,0x3d4); cr03=inb(0x3d5);
1012         outb(0x04,0x3d4); cr04=inb(0x3d5); outb(0x05,0x3d4); cr05=inb(0x3d5);
1013         outb(0x06,0x3d4); cr06=inb(0x3d5); outb(0x07,0x3d4); cr07=inb(0x3d5);
1014         outb(0x09,0x3d4); cr09=inb(0x3d5); outb(0x10,0x3d4); cr10=inb(0x3d5);
1015         outb(0x11,0x3d4); cr11=inb(0x3d5); outb(0x12,0x3d4); cr12=inb(0x3d5);
1016         outb(0x15,0x3d4); cr15=inb(0x3d5); outb(0x16,0x3d4); cr16=inb(0x3d5);
1017         outb(0x27,0x3d4); cr27=inb(0x3d5); outb(0x2b,0x3d4); cr2b=inb(0x3d5);
1018         outb(0x38,0x3d4); cr38=inb(0x3d5); outb(0x0b,0x3c4); inb(0x3c5);
1019         outb(0x0d,0x3c4); sr0d=inb(0x3c5); outb(0x18,0x3c4); sr18=inb(0x3c5);
1020         outb(0x19,0x3c4); sr19=inb(0x3c5); outb(0x0f,0x3ce); gr0f=inb(0x3cf);
1021
1022         htotal      = cr00 | (cr2b & 0x01) << 8;
1023         hdispend    = cr01 | (cr2b & 0x02) << 7;
1024         hblankstart = cr02 | (cr2b & 0x10) << 4;
1025         hblankend   = (cr03 & 0x1f) | (cr05 & 0x80) >> 2;
1026         hsyncstart  = cr04 | (cr2b & 0x08) << 5;
1027         hsyncend    = cr05 & 0x1f;
1028
1029         modedb[0].xres = hblankstart * 8;
1030         modedb[0].hsync_len = hsyncend * 8;
1031         modedb[0].right_margin = hsyncstart * 8 - modedb[0].xres;
1032         modedb[0].left_margin = (htotal + 5) * 8 - modedb[0].xres -
1033                 modedb[0].right_margin - modedb[0].hsync_len;
1034
1035         vtotal      = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4
1036                            | (cr27 & 0x80) << 3;
1037         vdispend    = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3
1038                            | (cr27 & 0x10) << 6;
1039         vsyncstart  = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2
1040                            | (cr27 & 0x20) << 5;
1041         vsyncend    = cr11 & 0x0f;
1042         vblankstart = cr15 | (cr07 & 0x08) << 5 | (cr09 & 0x20) << 4
1043                            | (cr27 & 0x40) << 4;
1044         vblankend   = cr16;
1045
1046         modedb[0].yres         = vdispend + 1;
1047         modedb[0].vsync_len    = vsyncend;
1048         modedb[0].lower_margin = vsyncstart - modedb[0].yres;
1049         modedb[0].upper_margin = vtotal - modedb[0].yres -
1050                 modedb[0].lower_margin - modedb[0].vsync_len + 2;
1051
1052         tmp = cr38 & 0x3c;
1053         modedb[0].bpp = tmp == 0 ? 8 : tmp == 4 ? 16 : tmp == 28 ? 24 :
1054                         tmp == 8 ? 32 : 8;
1055
1056         fi = ((5864727*(sr18+8))/(((sr19&0x3f)+2)*(1<<((sr19&0xc0)>>6))))>>12;
1057         pxclkdiv = ((gr0f & 0x08) >> 3 | (gr0f & 0x40) >> 5) + 1;
1058         tmp = sr0d & 0x06;
1059         vclkdiv = tmp == 0 ? 2 : tmp == 2 ? 4 : tmp == 4 ? 8 : 3; // * 2 !
1060         modedb[0].pxclk = ((100000000 * pxclkdiv * vclkdiv) >> 1) / fi;
1061
1062         if (verbosity > 0)
1063                 output("detected startup mode: "
1064                        "fbset -g %d %d %d ??? %d -t %d %d %d %d %d %d %d\n",
1065                        modedb[0].xres,modedb[0].yres,modedb[0].xres,
1066                        modedb[0].bpp,modedb[0].pxclk,modedb[0].left_margin,
1067                        modedb[0].right_margin,modedb[0].upper_margin,
1068                        modedb[0].lower_margin,modedb[0].hsync_len,
1069                        modedb[0].vsync_len);
1070
1071         //
1072         // We use this goto target in case of a failed check_var. No, I really
1073         // do not want to do it in another way!
1074         //
1075
1076         tryagain:
1077
1078         i = (mode == NULL) ? 0 :
1079             !strncmp(mode,"640x480",7) ? 1 :
1080             !strncmp(mode,"800x600",7) ? 2 :
1081             !strncmp(mode,"1024x768",8) ? 3 :
1082             !strncmp(mode,"1280x1024",9) ? 4 : 0;
1083
1084         ref = (ref < 50) ? 50 : (ref > 85) ? 85 : ref;
1085
1086         if(i==0) {
1087                 info->var.pixclock = modedb[i].pxclk;
1088                 info->var.bits_per_pixel = modedb[i].bpp;
1089         } else {
1090                 info->var.pixclock = (100000000 /
1091                         ((modedb[i].left_margin + modedb[i].xres +
1092                           modedb[i].right_margin + modedb[i].hsync_len
1093                          ) * (
1094                           modedb[i].upper_margin + modedb[i].yres +
1095                           modedb[i].lower_margin + modedb[i].vsync_len
1096                          ) *
1097                           ref / 10000
1098                         ));
1099                 info->var.bits_per_pixel = bpp;
1100         }
1101
1102         info->var.left_margin = modedb[i].left_margin;
1103         info->var.right_margin = modedb[i].right_margin;
1104         info->var.xres = modedb[i].xres;
1105         info->var.xres_virtual = modedb[i].xres;
1106         info->var.xoffset = 0;
1107         info->var.hsync_len = modedb[i].hsync_len;
1108         info->var.upper_margin = modedb[i].upper_margin;
1109         info->var.yres = modedb[i].yres;
1110         info->var.yres_virtual = modedb[i].vyres;
1111         info->var.yoffset = 0;
1112         info->var.lower_margin = modedb[i].lower_margin;
1113         info->var.vsync_len = modedb[i].vsync_len;
1114         info->var.sync = 0;
1115         info->var.vmode = FB_VMODE_NONINTERLACED;
1116
1117         if(cyblafb_check_var(&info->var,info)) {
1118                 // 640x480-8@75 should really never fail. One case would
1119                 // be fp == 1 and nativex < 640 ... give up then
1120                 if(i==1 && bpp == 8 && ref == 75){
1121                         output("Can't find a valid mode :-(\n");
1122                         return -EINVAL;
1123                 }
1124                 // Our detected mode is unlikely to fail. If it does,
1125                 // try 640x480-8@75 ...
1126                 if(i==0) {
1127                         mode="640x480";
1128                         bpp=8;
1129                         ref=75;
1130                         output("Detected mode failed check_var! "
1131                                "Trying 640x480-8@75\n");
1132                         goto tryagain;
1133                 }
1134                 // A specified video mode failed for some reason.
1135                 // Try the startup mode first
1136                 output("Specified mode '%s' failed check! "
1137                         "Falling back to startup mode.\n",mode);
1138                 mode=NULL;
1139                 goto tryagain;
1140         }
1141
1142         return 0;
1143
1144 }
1145
1146 //========================================================
1147 //
1148 // Detect activated memory size. Undefined values require
1149 // memsize parameter.
1150 //
1151 //========================================================
1152
1153 static unsigned int __devinit get_memsize(void)
1154 {
1155         unsigned char tmp;
1156         unsigned int k;
1157
1158         if (memsize)
1159                 k = memsize * Kb;
1160         else {
1161                 tmp = read3X4(CR1F) & 0x0F;
1162                 switch (tmp) {
1163                         case 0x03: k = 1 * Mb; break;
1164                         case 0x07: k = 2 * Mb; break;
1165                         case 0x0F: k = 4 * Mb; break;
1166                         case 0x04: k = 8 * Mb; break;
1167                         default:
1168                                 k = 1 * Mb;
1169                                 output("Unknown memory size code %x in CR1F."
1170                                        " We default to 1 Mb for now, please"
1171                                        " do provide a memsize parameter!\n",
1172                                        tmp);
1173                 }
1174         }
1175
1176         if (verbosity > 0)
1177                 output("framebuffer size = %d Kb\n",k/Kb);
1178         return k;
1179 }
1180
1181 //=========================================================
1182 //
1183 // Detect if a flat panel monitor connected to the special
1184 // interface is active. Override is possible by fp and crt
1185 // parameters.
1186 //
1187 //=========================================================
1188
1189 static unsigned int __devinit get_displaytype(void)
1190 {
1191         if (fp)
1192                 return DISPLAY_FP;
1193         if (crt)
1194                 return DISPLAY_CRT;
1195         return (read3CE(GR33) & 0x10)?DISPLAY_FP:DISPLAY_CRT;
1196 }
1197
1198 //=====================================
1199 //
1200 // Get native resolution of flat panel
1201 //
1202 //=====================================
1203
1204 static int __devinit get_nativex(void)
1205 {
1206         int x,y,tmp;
1207
1208         if (nativex)
1209                 return nativex;
1210
1211         tmp = (read3CE(GR52) >> 4) & 3;
1212
1213         switch (tmp) {
1214                 case 0:  x = 1280; y = 1024; break;
1215                 case 2:  x = 1024; y = 768;  break;
1216                 case 3:  x = 800;  y = 600;  break;
1217                 case 4:  x = 1400; y = 1050; break;
1218                 case 1:
1219                 default: x = 640;  y = 480;  break;
1220         }
1221
1222         if (verbosity > 0)
1223                 output("%dx%d flat panel found\n",x,y);
1224         return x;
1225 }
1226
1227 static int __devinit cybla_pci_probe(struct pci_dev * dev,
1228                                      const struct pci_device_id * id)
1229 {
1230         struct fb_info *info;
1231         struct cyblafb_par *par;
1232
1233         info = framebuffer_alloc(sizeof(struct cyblafb_par),&dev->dev);
1234
1235         if (!info)
1236                 goto errout_alloc;
1237
1238         par = info->par;
1239         par->ops = cyblafb_ops;
1240
1241         info->fix = cyblafb_fix;
1242         info->fbops = &par->ops;
1243         info->fix = cyblafb_fix;
1244
1245         if (pci_enable_device(dev)) {
1246                 output("could not enable device!\n");
1247                 goto errout_enable;
1248         }
1249
1250         // might already be requested by vga console or vesafb,
1251         // so we do care about success
1252         request_region(0x3c0,32,"cyblafb");
1253
1254         //
1255         // Graphics Engine Registers
1256         //
1257         request_region(GEBase,0x100,"cyblafb");
1258
1259         regdump(par);
1260
1261         enable_mmio();
1262
1263         // setup MMIO region
1264         info->fix.mmio_start = pci_resource_start(dev,1);
1265         info->fix.mmio_len = 0x20000;
1266
1267         if (!request_mem_region(info->fix.mmio_start,
1268                                 info->fix.mmio_len,"cyblafb")) {
1269                 output("request_mem_region failed for mmio region!\n");
1270                 goto errout_mmio_reqmem;
1271         }
1272
1273         io_virt = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
1274
1275         if (!io_virt) {
1276                 output("ioremap failed for mmio region\n");
1277                 goto errout_mmio_remap;
1278         }
1279
1280         // setup framebuffer memory ... might already be requested
1281         // by vesafb. Not to fail in case of an unsuccessful request
1282         // is useful for the development cycle
1283         info->fix.smem_start = pci_resource_start(dev,0);
1284         info->fix.smem_len = get_memsize();
1285
1286         if (!request_mem_region(info->fix.smem_start,
1287                                 info->fix.smem_len,"cyblafb")) {
1288                 output("request_mem_region failed for smem region!\n");
1289                 if (!vesafb)
1290                         goto errout_smem_req;
1291         }
1292
1293         info->screen_base = ioremap_nocache(info->fix.smem_start,
1294                                             info->fix.smem_len);
1295
1296         if (!info->screen_base) {
1297                 output("ioremap failed for smem region\n");
1298                 goto errout_smem_remap;
1299         }
1300
1301         displaytype = get_displaytype();
1302
1303         if(displaytype == DISPLAY_FP)
1304                 nativex = get_nativex();
1305
1306         //
1307         // FBINFO_HWACCEL_YWRAP    .... does not work (could be made to work?)
1308         // FBINFO_PARTIAL_PAN_OK   .... is not ok
1309         // FBINFO_READS_FAST       .... is necessary for optimal scrolling
1310         //
1311         info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN
1312                       | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT
1313                       | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_READS_FAST;
1314
1315         info->pseudo_palette = par->pseudo_pal;
1316
1317         if(getstartupmode(info))
1318                 goto errout_findmode;
1319
1320         fb_alloc_cmap(&info->cmap,256,0);
1321
1322         if (register_framebuffer(info)) {
1323                 output("Could not register CyBla framebuffer\n");
1324                 goto errout_register;
1325         }
1326
1327         pci_set_drvdata(dev,info);
1328
1329         //
1330         // normal exit and error paths
1331         //
1332
1333         return 0;
1334
1335  errout_register:
1336  errout_findmode:
1337         iounmap(info->screen_base);
1338  errout_smem_remap:
1339         release_mem_region(info->fix.smem_start,
1340                            info->fix.smem_len);
1341  errout_smem_req:
1342         iounmap(io_virt);
1343  errout_mmio_remap:
1344         release_mem_region(info->fix.mmio_start,
1345                            info->fix.mmio_len);
1346  errout_mmio_reqmem:
1347 //      release_region(0x3c0,32);
1348  errout_enable:
1349         framebuffer_release(info);
1350  errout_alloc:
1351         output("CyblaFB version %s aborting init.\n",VERSION);
1352         return -ENODEV;
1353 }
1354
1355 static void __devexit cybla_pci_remove(struct pci_dev *dev)
1356 {
1357         struct fb_info *info = pci_get_drvdata(dev);
1358
1359         unregister_framebuffer(info);
1360         iounmap(io_virt);
1361         iounmap(info->screen_base);
1362         release_mem_region(info->fix.smem_start,info->fix.smem_len);
1363         release_mem_region(info->fix.mmio_start,info->fix.mmio_len);
1364         fb_dealloc_cmap(&info->cmap);
1365         framebuffer_release(info);
1366         output("CyblaFB version %s normal exit.\n",VERSION);
1367 }
1368
1369 //
1370 // List of boards that we are trying to support
1371 //
1372 static struct pci_device_id cybla_devices[] = {
1373         {PCI_VENDOR_ID_TRIDENT,CYBERBLADEi1,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
1374         {0,}
1375 };
1376
1377 MODULE_DEVICE_TABLE(pci,cybla_devices);
1378
1379 static struct pci_driver cyblafb_pci_driver = {
1380         .name           = "cyblafb",
1381         .id_table       = cybla_devices,
1382         .probe          = cybla_pci_probe,
1383         .remove         = __devexit_p(cybla_pci_remove)
1384 };
1385
1386 //=============================================================
1387 //
1388 // kernel command line example:
1389 //
1390 //      video=cyblafb:1280x1024,bpp=16,ref=50 ...
1391 //
1392 // modprobe command line example:
1393 //
1394 //      modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
1395 //
1396 //=============================================================
1397
1398 static int __devinit cyblafb_init(void)
1399 {
1400 #ifndef MODULE
1401         char *options = NULL;
1402         char *opt;
1403
1404         if (fb_get_options("cyblafb",&options))
1405                 return -ENODEV;
1406
1407         if (options && *options)
1408                 while((opt = strsep(&options,",")) != NULL ) {
1409                         if (!*opt) continue;
1410                         else if (!strncmp(opt,"bpp=",4))
1411                                 bpp = simple_strtoul(opt+4,NULL,0);
1412                         else if (!strncmp(opt,"ref=",4))
1413                                 ref = simple_strtoul(opt+4,NULL,0);
1414                         else if (!strncmp(opt,"fp",2))
1415                                 displaytype = DISPLAY_FP;
1416                         else if (!strncmp(opt,"crt",3))
1417                                 displaytype = DISPLAY_CRT;
1418                         else if (!strncmp(opt,"nativex=",8))
1419                                 nativex = simple_strtoul(opt+8,NULL,0);
1420                         else if (!strncmp(opt,"center",6))
1421                                 center = 1;
1422                         else if (!strncmp(opt,"stretch",7))
1423                                 stretch = 1;
1424                         else if (!strncmp(opt,"pciwb=",6))
1425                                 pciwb = simple_strtoul(opt+6,NULL,0);
1426                         else if (!strncmp(opt,"pcirb=",6))
1427                                 pcirb = simple_strtoul(opt+6,NULL,0);
1428                         else if (!strncmp(opt,"pciwr=",6))
1429                                 pciwr = simple_strtoul(opt+6,NULL,0);
1430                         else if (!strncmp(opt,"pcirr=",6))
1431                                 pcirr = simple_strtoul(opt+6,NULL,0);
1432                         else if (!strncmp(opt,"memsize=",8))
1433                                 memsize = simple_strtoul(opt+8,NULL,0);
1434                         else if (!strncmp(opt,"verbosity=",10))
1435                                 verbosity = simple_strtoul(opt+10,NULL,0);
1436                         else if (!strncmp(opt,"vesafb",6))
1437                                 vesafb = 1;
1438                         else
1439                                 mode = opt;
1440                 }
1441 #endif
1442         output("CyblaFB version %s initializing\n",VERSION);
1443         return pci_module_init(&cyblafb_pci_driver);
1444 }
1445
1446 static void __exit cyblafb_exit(void)
1447 {
1448         pci_unregister_driver(&cyblafb_pci_driver);
1449 }
1450
1451 module_init(cyblafb_init);
1452 module_exit(cyblafb_exit);
1453
1454 MODULE_AUTHOR("Knut Petersen <knut_petersen@t-online.de>");
1455 MODULE_DESCRIPTION("Framebuffer driver for Cyberblade/i1 graphics core");
1456 MODULE_LICENSE("GPL");