drivers/usb/gadget/serial.c

   1 /*
   2  * g_serial.c -- USB gadget serial driver
   3  *
   4  * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
   5  *
   6  * This code is based in part on the Gadget Zero driver, which
   7  * is Copyright (C) 2003 by David Brownell, all rights reserved.
   8  *
   9  * This code also borrows from usbserial.c, which is
  10  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  11  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  12  * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
  13  *
  14  * This software is distributed under the terms of the GNU General
  15  * Public License ("GPL") as published by the Free Software Foundation,
  16  * either version 2 of that License or (at your option) any later version.
  17  *
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/kernel.h>
  22 #include <linux/delay.h>
  23 #include <linux/ioport.h>
  24 #include <linux/sched.h>
  25 #include <linux/slab.h>
  26 #include <linux/smp_lock.h>
  27 #include <linux/errno.h>
  28 #include <linux/init.h>
  29 #include <linux/timer.h>
  30 #include <linux/list.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/utsname.h>
  33 #include <linux/wait.h>
  34 #include <linux/proc_fs.h>
  35 #include <linux/device.h>
  36 #include <linux/tty.h>
  37 #include <linux/tty_flip.h>
  38
  39 #include <asm/byteorder.h>
  40 #include <asm/io.h>
  41 #include <asm/irq.h>
  42 #include <asm/system.h>
  43 #include <asm/unaligned.h>
  44 #include <asm/uaccess.h>
  45
  46 #include <linux/usb/ch9.h>
  47 #include <linux/usb/cdc.h>
  48 #include <linux/usb_gadget.h>
  49
  50 #include "gadget_chips.h"
  51
  52
  53 /* Defines */
  54
  55 #define GS_VERSION_STR                  "v2.2"
  56 #define GS_VERSION_NUM                  0x0202
  57
  58 #define GS_LONG_NAME                    "Gadget Serial"
  59 #define GS_SHORT_NAME                   "g_serial"
  60
  61 #define GS_MAJOR                        127
  62 #define GS_MINOR_START                  0
  63
  64 #define GS_NUM_PORTS                    16
  65
  66 #define GS_NUM_CONFIGS                  1
  67 #define GS_NO_CONFIG_ID                 0
  68 #define GS_BULK_CONFIG_ID               1
  69 #define GS_ACM_CONFIG_ID                2
  70
  71 #define GS_MAX_NUM_INTERFACES           2
  72 #define GS_BULK_INTERFACE_ID            0
  73 #define GS_CONTROL_INTERFACE_ID         0
  74 #define GS_DATA_INTERFACE_ID            1
  75
  76 #define GS_MAX_DESC_LEN                 256
  77
  78 #define GS_DEFAULT_READ_Q_SIZE          32
  79 #define GS_DEFAULT_WRITE_Q_SIZE         32
  80
  81 #define GS_DEFAULT_WRITE_BUF_SIZE       8192
  82 #define GS_TMP_BUF_SIZE                 8192
  83
  84 #define GS_CLOSE_TIMEOUT                15
  85
  86 #define GS_DEFAULT_USE_ACM              0
  87
  88 #define GS_DEFAULT_DTE_RATE             9600
  89 #define GS_DEFAULT_DATA_BITS            8
  90 #define GS_DEFAULT_PARITY               USB_CDC_NO_PARITY
  91 #define GS_DEFAULT_CHAR_FORMAT          USB_CDC_1_STOP_BITS
  92
  93 /* select highspeed/fullspeed, hiding highspeed if not configured */
  94 #ifdef CONFIG_USB_GADGET_DUALSPEED
  95 #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
  96 #else
  97 #define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
  98 #endif /* CONFIG_USB_GADGET_DUALSPEED */
  99
 100 /* debug settings */
 101 #ifdef GS_DEBUG
 102 static int debug = 1;
 103
 104 #define gs_debug(format, arg...) \
 105         do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
 106 #define gs_debug_level(level, format, arg...) \
 107         do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
 108
 109 #else
 110
 111 #define gs_debug(format, arg...) \
 112         do { } while(0)
 113 #define gs_debug_level(level, format, arg...) \
 114         do { } while(0)
 115
 116 #endif /* GS_DEBUG */
 117
 118 /* Thanks to NetChip Technologies for donating this product ID.
 119  *
 120  * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
 121  * Instead:  allocate your own, using normal USB-IF procedures.
 122  */
 123 #define GS_VENDOR_ID                    0x0525  /* NetChip */
 124 #define GS_PRODUCT_ID                   0xa4a6  /* Linux-USB Serial Gadget */
 125 #define GS_CDC_PRODUCT_ID               0xa4a7  /* ... as CDC-ACM */
 126
 127 #define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
 128 #define GS_NOTIFY_MAXPACKET             8
 129
 130
 131 /* Structures */
 132
 133 struct gs_dev;
 134
 135 /* circular buffer */
 136 struct gs_buf {
 137         unsigned int            buf_size;
 138         char                    *buf_buf;
 139         char                    *buf_get;
 140         char                    *buf_put;
 141 };
 142
 143 /* list of requests */
 144 struct gs_req_entry {
 145         struct list_head        re_entry;
 146         struct usb_request      *re_req;
 147 };
 148
 149 /* the port structure holds info for each port, one for each minor number */
 150 struct gs_port {
 151         struct gs_dev           *port_dev;      /* pointer to device struct */
 152         struct tty_struct       *port_tty;      /* pointer to tty struct */
 153         spinlock_t              port_lock;
 154         int                     port_num;
 155         int                     port_open_count;
 156         int                     port_in_use;    /* open/close in progress */
 157         wait_queue_head_t       port_write_wait;/* waiting to write */
 158         struct gs_buf           *port_write_buf;
 159         struct usb_cdc_line_coding      port_line_coding;
 160 };
 161
 162 /* the device structure holds info for the USB device */
 163 struct gs_dev {
 164         struct usb_gadget       *dev_gadget;    /* gadget device pointer */
 165         spinlock_t              dev_lock;       /* lock for set/reset config */
 166         int                     dev_config;     /* configuration number */
 167         struct usb_ep           *dev_notify_ep; /* address of notify endpoint */
 168         struct usb_ep           *dev_in_ep;     /* address of in endpoint */
 169         struct usb_ep           *dev_out_ep;    /* address of out endpoint */
 170         struct usb_endpoint_descriptor          /* descriptor of notify ep */
 171                                 *dev_notify_ep_desc;
 172         struct usb_endpoint_descriptor          /* descriptor of in endpoint */
 173                                 *dev_in_ep_desc;
 174         struct usb_endpoint_descriptor          /* descriptor of out endpoint */
 175                                 *dev_out_ep_desc;
 176         struct usb_request      *dev_ctrl_req;  /* control request */
 177         struct list_head        dev_req_list;   /* list of write requests */
 178         int                     dev_sched_port; /* round robin port scheduled */
 179         struct gs_port          *dev_port[GS_NUM_PORTS]; /* the ports */
 180 };
 181
 182
 183 /* Functions */
 184
 185 /* module */
 186 static int __init gs_module_init(void);
 187 static void __exit gs_module_exit(void);
 188
 189 /* tty driver */
 190 static int gs_open(struct tty_struct *tty, struct file *file);
 191 static void gs_close(struct tty_struct *tty, struct file *file);
 192 static int gs_write(struct tty_struct *tty,
 193         const unsigned char *buf, int count);
 194 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
 195 static void gs_flush_chars(struct tty_struct *tty);
 196 static int gs_write_room(struct tty_struct *tty);
 197 static int gs_chars_in_buffer(struct tty_struct *tty);
 198 static void gs_throttle(struct tty_struct * tty);
 199 static void gs_unthrottle(struct tty_struct * tty);
 200 static void gs_break(struct tty_struct *tty, int break_state);
 201 static int  gs_ioctl(struct tty_struct *tty, struct file *file,
 202         unsigned int cmd, unsigned long arg);
 203 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
 204
 205 static int gs_send(struct gs_dev *dev);
 206 static int gs_send_packet(struct gs_dev *dev, char *packet,
 207         unsigned int size);
 208 static int gs_recv_packet(struct gs_dev *dev, char *packet,
 209         unsigned int size);
 210 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
 211 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
 212
 213 /* gadget driver */
 214 static int gs_bind(struct usb_gadget *gadget);
 215 static void gs_unbind(struct usb_gadget *gadget);
 216 static int gs_setup(struct usb_gadget *gadget,
 217         const struct usb_ctrlrequest *ctrl);
 218 static int gs_setup_standard(struct usb_gadget *gadget,
 219         const struct usb_ctrlrequest *ctrl);
 220 static int gs_setup_class(struct usb_gadget *gadget,
 221         const struct usb_ctrlrequest *ctrl);
 222 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
 223 static void gs_disconnect(struct usb_gadget *gadget);
 224 static int gs_set_config(struct gs_dev *dev, unsigned config);
 225 static void gs_reset_config(struct gs_dev *dev);
 226 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
 227                 u8 type, unsigned int index, int is_otg);
 228
 229 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
 230         gfp_t kmalloc_flags);
 231 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
 232
 233 static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
 234         gfp_t kmalloc_flags);
 235 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
 236
 237 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
 238 static void gs_free_ports(struct gs_dev *dev);
 239
 240 /* circular buffer */
 241 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
 242 static void gs_buf_free(struct gs_buf *gb);
 243 static void gs_buf_clear(struct gs_buf *gb);
 244 static unsigned int gs_buf_data_avail(struct gs_buf *gb);
 245 static unsigned int gs_buf_space_avail(struct gs_buf *gb);
 246 static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
 247         unsigned int count);
 248 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
 249         unsigned int count);
 250
 251 /* external functions */
 252 extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
 253
 254
 255 /* Globals */
 256
 257 static struct gs_dev *gs_device;
 258
 259 static const char *EP_IN_NAME;
 260 static const char *EP_OUT_NAME;
 261 static const char *EP_NOTIFY_NAME;
 262
 263 static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
 264
 265 static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
 266 static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
 267
 268 static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
 269
 270 static unsigned int use_acm = GS_DEFAULT_USE_ACM;
 271
 272
 273 /* tty driver struct */
 274 static const struct tty_operations gs_tty_ops = {
 275         .open =                 gs_open,
 276         .close =                gs_close,
 277         .write =                gs_write,
 278         .put_char =             gs_put_char,
 279         .flush_chars =          gs_flush_chars,
 280         .write_room =           gs_write_room,
 281         .ioctl =                gs_ioctl,
 282         .set_termios =          gs_set_termios,
 283         .throttle =             gs_throttle,
 284         .unthrottle =           gs_unthrottle,
 285         .break_ctl =            gs_break,
 286         .chars_in_buffer =      gs_chars_in_buffer,
 287 };
 288 static struct tty_driver *gs_tty_driver;
 289
 290 /* gadget driver struct */
 291 static struct usb_gadget_driver gs_gadget_driver = {
 292 #ifdef CONFIG_USB_GADGET_DUALSPEED
 293         .speed =                USB_SPEED_HIGH,
 294 #else
 295         .speed =                USB_SPEED_FULL,
 296 #endif /* CONFIG_USB_GADGET_DUALSPEED */
 297         .function =             GS_LONG_NAME,
 298         .bind =                 gs_bind,
 299         .unbind =               gs_unbind,
 300         .setup =                gs_setup,
 301         .disconnect =           gs_disconnect,
 302         .driver = {
 303                 .name =         GS_SHORT_NAME,
 304         },
 305 };
 306
 307
 308 /* USB descriptors */
 309
 310 #define GS_MANUFACTURER_STR_ID  1
 311 #define GS_PRODUCT_STR_ID       2
 312 #define GS_SERIAL_STR_ID        3
 313 #define GS_BULK_CONFIG_STR_ID   4
 314 #define GS_ACM_CONFIG_STR_ID    5
 315 #define GS_CONTROL_STR_ID       6
 316 #define GS_DATA_STR_ID          7
 317
 318 /* static strings, in UTF-8 */
 319 static char manufacturer[50];
 320 static struct usb_string gs_strings[] = {
 321         { GS_MANUFACTURER_STR_ID, manufacturer },
 322         { GS_PRODUCT_STR_ID, GS_LONG_NAME },
 323         { GS_SERIAL_STR_ID, "0" },
 324         { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
 325         { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
 326         { GS_CONTROL_STR_ID, "Gadget Serial Control" },
 327         { GS_DATA_STR_ID, "Gadget Serial Data" },
 328         {  } /* end of list */
 329 };
 330
 331 static struct usb_gadget_strings gs_string_table = {
 332         .language =             0x0409, /* en-us */
 333         .strings =              gs_strings,
 334 };
 335
 336 static struct usb_device_descriptor gs_device_desc = {
 337         .bLength =              USB_DT_DEVICE_SIZE,
 338         .bDescriptorType =      USB_DT_DEVICE,
 339         .bcdUSB =               __constant_cpu_to_le16(0x0200),
 340         .bDeviceSubClass =      0,
 341         .bDeviceProtocol =      0,
 342         .idVendor =             __constant_cpu_to_le16(GS_VENDOR_ID),
 343         .idProduct =            __constant_cpu_to_le16(GS_PRODUCT_ID),
 344         .iManufacturer =        GS_MANUFACTURER_STR_ID,
 345         .iProduct =             GS_PRODUCT_STR_ID,
 346         .iSerialNumber =        GS_SERIAL_STR_ID,
 347         .bNumConfigurations =   GS_NUM_CONFIGS,
 348 };
 349
 350 static struct usb_otg_descriptor gs_otg_descriptor = {
 351         .bLength =              sizeof(gs_otg_descriptor),
 352         .bDescriptorType =      USB_DT_OTG,
 353         .bmAttributes =         USB_OTG_SRP,
 354 };
 355
 356 static struct usb_config_descriptor gs_bulk_config_desc = {
 357         .bLength =              USB_DT_CONFIG_SIZE,
 358         .bDescriptorType =      USB_DT_CONFIG,
 359         /* .wTotalLength computed dynamically */
 360         .bNumInterfaces =       1,
 361         .bConfigurationValue =  GS_BULK_CONFIG_ID,
 362         .iConfiguration =       GS_BULK_CONFIG_STR_ID,
 363         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 364         .bMaxPower =            1,
 365 };
 366
 367 static struct usb_config_descriptor gs_acm_config_desc = {
 368         .bLength =              USB_DT_CONFIG_SIZE,
 369         .bDescriptorType =      USB_DT_CONFIG,
 370         /* .wTotalLength computed dynamically */
 371         .bNumInterfaces =       2,
 372         .bConfigurationValue =  GS_ACM_CONFIG_ID,
 373         .iConfiguration =       GS_ACM_CONFIG_STR_ID,
 374         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 375         .bMaxPower =            1,
 376 };
 377
 378 static const struct usb_interface_descriptor gs_bulk_interface_desc = {
 379         .bLength =              USB_DT_INTERFACE_SIZE,
 380         .bDescriptorType =      USB_DT_INTERFACE,
 381         .bInterfaceNumber =     GS_BULK_INTERFACE_ID,
 382         .bNumEndpoints =        2,
 383         .bInterfaceClass =      USB_CLASS_CDC_DATA,
 384         .bInterfaceSubClass =   0,
 385         .bInterfaceProtocol =   0,
 386         .iInterface =           GS_DATA_STR_ID,
 387 };
 388
 389 static const struct usb_interface_descriptor gs_control_interface_desc = {
 390         .bLength =              USB_DT_INTERFACE_SIZE,
 391         .bDescriptorType =      USB_DT_INTERFACE,
 392         .bInterfaceNumber =     GS_CONTROL_INTERFACE_ID,
 393         .bNumEndpoints =        1,
 394         .bInterfaceClass =      USB_CLASS_COMM,
 395         .bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
 396         .bInterfaceProtocol =   USB_CDC_ACM_PROTO_AT_V25TER,
 397         .iInterface =           GS_CONTROL_STR_ID,
 398 };
 399
 400 static const struct usb_interface_descriptor gs_data_interface_desc = {
 401         .bLength =              USB_DT_INTERFACE_SIZE,
 402         .bDescriptorType =      USB_DT_INTERFACE,
 403         .bInterfaceNumber =     GS_DATA_INTERFACE_ID,
 404         .bNumEndpoints =        2,
 405         .bInterfaceClass =      USB_CLASS_CDC_DATA,
 406         .bInterfaceSubClass =   0,
 407         .bInterfaceProtocol =   0,
 408         .iInterface =           GS_DATA_STR_ID,
 409 };
 410
 411 static const struct usb_cdc_header_desc gs_header_desc = {
 412         .bLength =              sizeof(gs_header_desc),
 413         .bDescriptorType =      USB_DT_CS_INTERFACE,
 414         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
 415         .bcdCDC =               __constant_cpu_to_le16(0x0110),
 416 };
 417
 418 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
 419         .bLength =              sizeof(gs_call_mgmt_descriptor),
 420         .bDescriptorType =      USB_DT_CS_INTERFACE,
 421         .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
 422         .bmCapabilities =       0,
 423         .bDataInterface =       1,      /* index of data interface */
 424 };
 425
 426 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
 427         .bLength =              sizeof(gs_acm_descriptor),
 428         .bDescriptorType =      USB_DT_CS_INTERFACE,
 429         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
 430         .bmCapabilities =       0,
 431 };
 432
 433 static const struct usb_cdc_union_desc gs_union_desc = {
 434         .bLength =              sizeof(gs_union_desc),
 435         .bDescriptorType =      USB_DT_CS_INTERFACE,
 436         .bDescriptorSubType =   USB_CDC_UNION_TYPE,
 437         .bMasterInterface0 =    0,      /* index of control interface */
 438         .bSlaveInterface0 =     1,      /* index of data interface */
 439 };
 440
 441 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
 442         .bLength =              USB_DT_ENDPOINT_SIZE,
 443         .bDescriptorType =      USB_DT_ENDPOINT,
 444         .bEndpointAddress =     USB_DIR_IN,
 445         .bmAttributes =         USB_ENDPOINT_XFER_INT,
 446         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
 447         .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
 448 };
 449
 450 static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
 451         .bLength =              USB_DT_ENDPOINT_SIZE,
 452         .bDescriptorType =      USB_DT_ENDPOINT,
 453         .bEndpointAddress =     USB_DIR_IN,
 454         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 455 };
 456
 457 static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
 458         .bLength =              USB_DT_ENDPOINT_SIZE,
 459         .bDescriptorType =      USB_DT_ENDPOINT,
 460         .bEndpointAddress =     USB_DIR_OUT,
 461         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 462 };
 463
 464 static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
 465         (struct usb_descriptor_header *) &gs_otg_descriptor,
 466         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
 467         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
 468         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
 469         NULL,
 470 };
 471
 472 static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
 473         (struct usb_descriptor_header *) &gs_otg_descriptor,
 474         (struct usb_descriptor_header *) &gs_control_interface_desc,
 475         (struct usb_descriptor_header *) &gs_header_desc,
 476         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
 477         (struct usb_descriptor_header *) &gs_acm_descriptor,
 478         (struct usb_descriptor_header *) &gs_union_desc,
 479         (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
 480         (struct usb_descriptor_header *) &gs_data_interface_desc,
 481         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
 482         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
 483         NULL,
 484 };
 485
 486 #ifdef CONFIG_USB_GADGET_DUALSPEED
 487 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
 488         .bLength =              USB_DT_ENDPOINT_SIZE,
 489         .bDescriptorType =      USB_DT_ENDPOINT,
 490         .bEndpointAddress =     USB_DIR_IN,
 491         .bmAttributes =         USB_ENDPOINT_XFER_INT,
 492         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
 493         .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
 494 };
 495
 496 static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
 497         .bLength =              USB_DT_ENDPOINT_SIZE,
 498         .bDescriptorType =      USB_DT_ENDPOINT,
 499         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 500         .wMaxPacketSize =       __constant_cpu_to_le16(512),
 501 };
 502
 503 static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
 504         .bLength =              USB_DT_ENDPOINT_SIZE,
 505         .bDescriptorType =      USB_DT_ENDPOINT,
 506         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 507         .wMaxPacketSize =       __constant_cpu_to_le16(512),
 508 };
 509
 510 static struct usb_qualifier_descriptor gs_qualifier_desc = {
 511         .bLength =              sizeof(struct usb_qualifier_descriptor),
 512         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
 513         .bcdUSB =               __constant_cpu_to_le16 (0x0200),
 514         /* assumes ep0 uses the same value for both speeds ... */
 515         .bNumConfigurations =   GS_NUM_CONFIGS,
 516 };
 517
 518 static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
 519         (struct usb_descriptor_header *) &gs_otg_descriptor,
 520         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
 521         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
 522         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
 523         NULL,
 524 };
 525
 526 static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
 527         (struct usb_descriptor_header *) &gs_otg_descriptor,
 528         (struct usb_descriptor_header *) &gs_control_interface_desc,
 529         (struct usb_descriptor_header *) &gs_header_desc,
 530         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
 531         (struct usb_descriptor_header *) &gs_acm_descriptor,
 532         (struct usb_descriptor_header *) &gs_union_desc,
 533         (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
 534         (struct usb_descriptor_header *) &gs_data_interface_desc,
 535         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
 536         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
 537         NULL,
 538 };
 539
 540 #endif /* CONFIG_USB_GADGET_DUALSPEED */
 541
 542
 543 /* Module */
 544 MODULE_DESCRIPTION(GS_LONG_NAME);
 545 MODULE_AUTHOR("Al Borchers");
 546 MODULE_LICENSE("GPL");
 547
 548 #ifdef GS_DEBUG
 549 module_param(debug, int, S_IRUGO|S_IWUSR);
 550 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
 551 #endif
 552
 553 module_param(read_q_size, uint, S_IRUGO);
 554 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
 555
 556 module_param(write_q_size, uint, S_IRUGO);
 557 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
 558
 559 module_param(write_buf_size, uint, S_IRUGO);
 560 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
 561
 562 module_param(use_acm, uint, S_IRUGO);
 563 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
 564
 565 module_init(gs_module_init);
 566 module_exit(gs_module_exit);
 567
 568 /*
 569 *  gs_module_init
 570 *
 571 *  Register as a USB gadget driver and a tty driver.
 572 */
 573 static int __init gs_module_init(void)
 574 {
 575         int i;
 576         int retval;
 577
 578         retval = usb_gadget_register_driver(&gs_gadget_driver);
 579         if (retval) {
 580                 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
 581                 return retval;
 582         }
 583
 584         gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
 585         if (!gs_tty_driver)
 586                 return -ENOMEM;
 587         gs_tty_driver->owner = THIS_MODULE;
 588         gs_tty_driver->driver_name = GS_SHORT_NAME;
 589         gs_tty_driver->name = "ttygs";
 590         gs_tty_driver->major = GS_MAJOR;
 591         gs_tty_driver->minor_start = GS_MINOR_START;
 592         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 593         gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
 594         gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 595         gs_tty_driver->init_termios = tty_std_termios;
 596         gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 597         tty_set_operations(gs_tty_driver, &gs_tty_ops);
 598
 599         for (i=0; i < GS_NUM_PORTS; i++)
 600                 sema_init(&gs_open_close_sem[i], 1);
 601
 602         retval = tty_register_driver(gs_tty_driver);
 603         if (retval) {
 604                 usb_gadget_unregister_driver(&gs_gadget_driver);
 605                 put_tty_driver(gs_tty_driver);
 606                 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
 607                 return retval;
 608         }
 609
 610         printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
 611         return 0;
 612 }
 613
 614 /*
 615 * gs_module_exit
 616 *
 617 * Unregister as a tty driver and a USB gadget driver.
 618 */
 619 static void __exit gs_module_exit(void)
 620 {
 621         tty_unregister_driver(gs_tty_driver);
 622         put_tty_driver(gs_tty_driver);
 623         usb_gadget_unregister_driver(&gs_gadget_driver);
 624
 625         printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
 626 }
 627
 628 /* TTY Driver */
 629
 630 /*
 631  * gs_open
 632  */
 633 static int gs_open(struct tty_struct *tty, struct file *file)
 634 {
 635         int port_num;
 636         unsigned long flags;
 637         struct gs_port *port;
 638         struct gs_dev *dev;
 639         struct gs_buf *buf;
 640         struct semaphore *sem;
 641         int ret;
 642
 643         port_num = tty->index;
 644
 645         gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
 646
 647         if (port_num < 0 || port_num >= GS_NUM_PORTS) {
 648                 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
 649                         port_num, tty, file);
 650                 return -ENODEV;
 651         }
 652
 653         dev = gs_device;
 654
 655         if (dev == NULL) {
 656                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
 657                         port_num, tty, file);
 658                 return -ENODEV;
 659         }
 660
 661         sem = &gs_open_close_sem[port_num];
 662         if (down_interruptible(sem)) {
 663                 printk(KERN_ERR
 664                 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
 665                         port_num, tty, file);
 666                 return -ERESTARTSYS;
 667         }
 668
 669         spin_lock_irqsave(&dev->dev_lock, flags);
 670
 671         if (dev->dev_config == GS_NO_CONFIG_ID) {
 672                 printk(KERN_ERR
 673                         "gs_open: (%d,%p,%p) device is not connected\n",
 674                         port_num, tty, file);
 675                 ret = -ENODEV;
 676                 goto exit_unlock_dev;
 677         }
 678
 679         port = dev->dev_port[port_num];
 680
 681         if (port == NULL) {
 682                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
 683                         port_num, tty, file);
 684                 ret = -ENODEV;
 685                 goto exit_unlock_dev;
 686         }
 687
 688         spin_lock(&port->port_lock);
 689         spin_unlock(&dev->dev_lock);
 690
 691         if (port->port_dev == NULL) {
 692                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
 693                         port_num, tty, file);
 694                 ret = -EIO;
 695                 goto exit_unlock_port;
 696         }
 697
 698         if (port->port_open_count > 0) {
 699                 ++port->port_open_count;
 700                 gs_debug("gs_open: (%d,%p,%p) already open\n",
 701                         port_num, tty, file);
 702                 ret = 0;
 703                 goto exit_unlock_port;
 704         }
 705
 706         tty->driver_data = NULL;
 707
 708         /* mark port as in use, we can drop port lock and sleep if necessary */
 709         port->port_in_use = 1;
 710
 711         /* allocate write buffer on first open */
 712         if (port->port_write_buf == NULL) {
 713                 spin_unlock_irqrestore(&port->port_lock, flags);
 714                 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
 715                 spin_lock_irqsave(&port->port_lock, flags);
 716
 717                 /* might have been disconnected while asleep, check */
 718                 if (port->port_dev == NULL) {
 719                         printk(KERN_ERR
 720                                 "gs_open: (%d,%p,%p) port disconnected (2)\n",
 721                                 port_num, tty, file);
 722                         port->port_in_use = 0;
 723                         ret = -EIO;
 724                         goto exit_unlock_port;
 725                 }
 726
 727                 if ((port->port_write_buf=buf) == NULL) {
 728                         printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
 729                                 port_num, tty, file);
 730                         port->port_in_use = 0;
 731                         ret = -ENOMEM;
 732                         goto exit_unlock_port;
 733                 }
 734
 735         }
 736
 737         /* wait for carrier detect (not implemented) */
 738
 739         /* might have been disconnected while asleep, check */
 740         if (port->port_dev == NULL) {
 741                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
 742                         port_num, tty, file);
 743                 port->port_in_use = 0;
 744                 ret = -EIO;
 745                 goto exit_unlock_port;
 746         }
 747
 748         tty->driver_data = port;
 749         port->port_tty = tty;
 750         port->port_open_count = 1;
 751         port->port_in_use = 0;
 752
 753         gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
 754
 755         ret = 0;
 756
 757 exit_unlock_port:
 758         spin_unlock_irqrestore(&port->port_lock, flags);
 759         up(sem);
 760         return ret;
 761
 762 exit_unlock_dev:
 763         spin_unlock_irqrestore(&dev->dev_lock, flags);
 764         up(sem);
 765         return ret;
 766
 767 }
 768
 769 /*
 770  * gs_close
 771  */
 772
 773 #define GS_WRITE_FINISHED_EVENT_SAFELY(p)                       \
 774 ({                                                              \
 775         int cond;                                               \
 776                                                                 \
 777         spin_lock_irq(&(p)->port_lock);                         \
 778         cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
 779         spin_unlock_irq(&(p)->port_lock);                       \
 780         cond;                                                   \
 781 })
 782
 783 static void gs_close(struct tty_struct *tty, struct file *file)
 784 {
 785         struct gs_port *port = tty->driver_data;
 786         struct semaphore *sem;
 787
 788         if (port == NULL) {
 789                 printk(KERN_ERR "gs_close: NULL port pointer\n");
 790                 return;
 791         }
 792
 793         gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
 794
 795         sem = &gs_open_close_sem[port->port_num];
 796         down(sem);
 797
 798         spin_lock_irq(&port->port_lock);
 799
 800         if (port->port_open_count == 0) {
 801                 printk(KERN_ERR
 802                         "gs_close: (%d,%p,%p) port is already closed\n",
 803                         port->port_num, tty, file);
 804                 goto exit;
 805         }
 806
 807         if (port->port_open_count > 1) {
 808                 --port->port_open_count;
 809                 goto exit;
 810         }
 811
 812         /* free disconnected port on final close */
 813         if (port->port_dev == NULL) {
 814                 kfree(port);
 815                 goto exit;
 816         }
 817
 818         /* mark port as closed but in use, we can drop port lock */
 819         /* and sleep if necessary */
 820         port->port_in_use = 1;
 821         port->port_open_count = 0;
 822
 823         /* wait for write buffer to drain, or */
 824         /* at most GS_CLOSE_TIMEOUT seconds */
 825         if (gs_buf_data_avail(port->port_write_buf) > 0) {
 826                 spin_unlock_irq(&port->port_lock);
 827                 wait_event_interruptible_timeout(port->port_write_wait,
 828                                         GS_WRITE_FINISHED_EVENT_SAFELY(port),
 829                                         GS_CLOSE_TIMEOUT * HZ);
 830                 spin_lock_irq(&port->port_lock);
 831         }
 832
 833         /* free disconnected port on final close */
 834         /* (might have happened during the above sleep) */
 835         if (port->port_dev == NULL) {
 836                 kfree(port);
 837                 goto exit;
 838         }
 839
 840         gs_buf_clear(port->port_write_buf);
 841
 842         tty->driver_data = NULL;
 843         port->port_tty = NULL;
 844         port->port_in_use = 0;
 845
 846         gs_debug("gs_close: (%d,%p,%p) completed\n",
 847                 port->port_num, tty, file);
 848
 849 exit:
 850         spin_unlock_irq(&port->port_lock);
 851         up(sem);
 852 }
 853
 854 /*
 855  * gs_write
 856  */
 857 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 858 {
 859         unsigned long flags;
 860         struct gs_port *port = tty->driver_data;
 861         int ret;
 862
 863         if (port == NULL) {
 864                 printk(KERN_ERR "gs_write: NULL port pointer\n");
 865                 return -EIO;
 866         }
 867
 868         gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
 869                 count);
 870
 871         if (count == 0)
 872                 return 0;
 873
 874         spin_lock_irqsave(&port->port_lock, flags);
 875
 876         if (port->port_dev == NULL) {
 877                 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
 878                         port->port_num, tty);
 879                 ret = -EIO;
 880                 goto exit;
 881         }
 882
 883         if (port->port_open_count == 0) {
 884                 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
 885                         port->port_num, tty);
 886                 ret = -EBADF;
 887                 goto exit;
 888         }
 889
 890         count = gs_buf_put(port->port_write_buf, buf, count);
 891
 892         spin_unlock_irqrestore(&port->port_lock, flags);
 893
 894         gs_send(gs_device);
 895
 896         gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
 897                 count);
 898
 899         return count;
 900
 901 exit:
 902         spin_unlock_irqrestore(&port->port_lock, flags);
 903         return ret;
 904 }
 905
 906 /*
 907  * gs_put_char
 908  */
 909 static void gs_put_char(struct tty_struct *tty, unsigned char ch)
 910 {
 911         unsigned long flags;
 912         struct gs_port *port = tty->driver_data;
 913
 914         if (port == NULL) {
 915                 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
 916                 return;
 917         }
 918
 919         gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
 920
 921         spin_lock_irqsave(&port->port_lock, flags);
 922
 923         if (port->port_dev == NULL) {
 924                 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
 925                         port->port_num, tty);
 926                 goto exit;
 927         }
 928
 929         if (port->port_open_count == 0) {
 930                 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
 931                         port->port_num, tty);
 932                 goto exit;
 933         }
 934
 935         gs_buf_put(port->port_write_buf, &ch, 1);
 936
 937 exit:
 938         spin_unlock_irqrestore(&port->port_lock, flags);
 939 }
 940
 941 /*
 942  * gs_flush_chars
 943  */
 944 static void gs_flush_chars(struct tty_struct *tty)
 945 {
 946         unsigned long flags;
 947         struct gs_port *port = tty->driver_data;
 948
 949         if (port == NULL) {
 950                 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
 951                 return;
 952         }
 953
 954         gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
 955
 956         spin_lock_irqsave(&port->port_lock, flags);
 957
 958         if (port->port_dev == NULL) {
 959                 printk(KERN_ERR
 960                         "gs_flush_chars: (%d,%p) port is not connected\n",
 961                         port->port_num, tty);
 962                 goto exit;
 963         }
 964
 965         if (port->port_open_count == 0) {
 966                 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
 967                         port->port_num, tty);
 968                 goto exit;
 969         }
 970
 971         spin_unlock_irqrestore(&port->port_lock, flags);
 972
 973         gs_send(gs_device);
 974
 975         return;
 976
 977 exit:
 978         spin_unlock_irqrestore(&port->port_lock, flags);
 979 }
 980
 981 /*
 982  * gs_write_room
 983  */
 984 static int gs_write_room(struct tty_struct *tty)
 985 {
 986
 987         int room = 0;
 988         unsigned long flags;
 989         struct gs_port *port = tty->driver_data;
 990
 991
 992         if (port == NULL)
 993                 return 0;
 994
 995         spin_lock_irqsave(&port->port_lock, flags);
 996
 997         if (port->port_dev != NULL && port->port_open_count > 0
 998         && port->port_write_buf != NULL)
 999                 room = gs_buf_space_avail(port->port_write_buf);
1000
1001         spin_unlock_irqrestore(&port->port_lock, flags);
1002
1003         gs_debug("gs_write_room: (%d,%p) room=%d\n",
1004                 port->port_num, tty, room);
1005
1006         return room;
1007 }
1008
1009 /*
1010  * gs_chars_in_buffer
1011  */
1012 static int gs_chars_in_buffer(struct tty_struct *tty)
1013 {
1014         int chars = 0;
1015         unsigned long flags;
1016         struct gs_port *port = tty->driver_data;
1017
1018         if (port == NULL)
1019                 return 0;
1020
1021         spin_lock_irqsave(&port->port_lock, flags);
1022
1023         if (port->port_dev != NULL && port->port_open_count > 0
1024         && port->port_write_buf != NULL)
1025                 chars = gs_buf_data_avail(port->port_write_buf);
1026
1027         spin_unlock_irqrestore(&port->port_lock, flags);
1028
1029         gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1030                 port->port_num, tty, chars);
1031
1032         return chars;
1033 }
1034
1035 /*
1036  * gs_throttle
1037  */
1038 static void gs_throttle(struct tty_struct *tty)
1039 {
1040 }
1041
1042 /*
1043  * gs_unthrottle
1044  */
1045 static void gs_unthrottle(struct tty_struct *tty)
1046 {
1047 }
1048
1049 /*
1050  * gs_break
1051  */
1052 static void gs_break(struct tty_struct *tty, int break_state)
1053 {
1054 }
1055
1056 /*
1057  * gs_ioctl
1058  */
1059 static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1060 {
1061         struct gs_port *port = tty->driver_data;
1062
1063         if (port == NULL) {
1064                 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1065                 return -EIO;
1066         }
1067
1068         gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1069                 port->port_num, tty, file, cmd, arg);
1070
1071         /* handle ioctls */
1072
1073         /* could not handle ioctl */
1074         return -ENOIOCTLCMD;
1075 }
1076
1077 /*
1078  * gs_set_termios
1079  */
1080 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
1081 {
1082 }
1083
1084 /*
1085 * gs_send
1086 *
1087 * This function finds available write requests, calls
1088 * gs_send_packet to fill these packets with data, and
1089 * continues until either there are no more write requests
1090 * available or no more data to send.  This function is
1091 * run whenever data arrives or write requests are available.
1092 */
1093 static int gs_send(struct gs_dev *dev)
1094 {
1095         int ret,len;
1096         unsigned long flags;
1097         struct usb_ep *ep;
1098         struct usb_request *req;
1099         struct gs_req_entry *req_entry;
1100
1101         if (dev == NULL) {
1102                 printk(KERN_ERR "gs_send: NULL device pointer\n");
1103                 return -ENODEV;
1104         }
1105
1106         spin_lock_irqsave(&dev->dev_lock, flags);
1107
1108         ep = dev->dev_in_ep;
1109
1110         while(!list_empty(&dev->dev_req_list)) {
1111
1112                 req_entry = list_entry(dev->dev_req_list.next,
1113                         struct gs_req_entry, re_entry);
1114
1115                 req = req_entry->re_req;
1116
1117                 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1118
1119                 if (len > 0) {
1120 gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1121                         list_del(&req_entry->re_entry);
1122                         req->length = len;
1123                         spin_unlock_irqrestore(&dev->dev_lock, flags);
1124                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1125                                 printk(KERN_ERR
1126                                 "gs_send: cannot queue read request, ret=%d\n",
1127                                         ret);
1128                                 spin_lock_irqsave(&dev->dev_lock, flags);
1129                                 break;
1130                         }
1131                         spin_lock_irqsave(&dev->dev_lock, flags);
1132                 } else {
1133                         break;
1134                 }
1135
1136         }
1137
1138         spin_unlock_irqrestore(&dev->dev_lock, flags);
1139
1140         return 0;
1141 }
1142
1143 /*
1144  * gs_send_packet
1145  *
1146  * If there is data to send, a packet is built in the given
1147  * buffer and the size is returned.  If there is no data to
1148  * send, 0 is returned.  If there is any error a negative
1149  * error number is returned.
1150  *
1151  * Called during USB completion routine, on interrupt time.
1152  *
1153  * We assume that disconnect will not happen until all completion
1154  * routines have completed, so we can assume that the dev_port
1155  * array does not change during the lifetime of this function.
1156  */
1157 static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1158 {
1159         unsigned int len;
1160         struct gs_port *port;
1161
1162         /* TEMPORARY -- only port 0 is supported right now */
1163         port = dev->dev_port[0];
1164
1165         if (port == NULL) {
1166                 printk(KERN_ERR
1167                         "gs_send_packet: port=%d, NULL port pointer\n",
1168                         0);
1169                 return -EIO;
1170         }
1171
1172         spin_lock(&port->port_lock);
1173
1174         len = gs_buf_data_avail(port->port_write_buf);
1175         if (len < size)
1176                 size = len;
1177
1178         if (size == 0)
1179                 goto exit;
1180
1181         size = gs_buf_get(port->port_write_buf, packet, size);
1182
1183         if (port->port_tty)
1184                 wake_up_interruptible(&port->port_tty->write_wait);
1185
1186 exit:
1187         spin_unlock(&port->port_lock);
1188         return size;
1189 }
1190
1191 /*
1192  * gs_recv_packet
1193  *
1194  * Called for each USB packet received.  Reads the packet
1195  * header and stuffs the data in the appropriate tty buffer.
1196  * Returns 0 if successful, or a negative error number.
1197  *
1198  * Called during USB completion routine, on interrupt time.
1199  *
1200  * We assume that disconnect will not happen until all completion
1201  * routines have completed, so we can assume that the dev_port
1202  * array does not change during the lifetime of this function.
1203  */
1204 static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1205 {
1206         unsigned int len;
1207         struct gs_port *port;
1208         int ret;
1209         struct tty_struct *tty;
1210
1211         /* TEMPORARY -- only port 0 is supported right now */
1212         port = dev->dev_port[0];
1213
1214         if (port == NULL) {
1215                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1216                         port->port_num);
1217                 return -EIO;
1218         }
1219
1220         spin_lock(&port->port_lock);
1221
1222         if (port->port_open_count == 0) {
1223                 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1224                         port->port_num);
1225                 ret = -EIO;
1226                 goto exit;
1227         }
1228
1229
1230         tty = port->port_tty;
1231
1232         if (tty == NULL) {
1233                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1234                         port->port_num);
1235                 ret = -EIO;
1236                 goto exit;
1237         }
1238
1239         if (port->port_tty->magic != TTY_MAGIC) {
1240                 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1241                         port->port_num);
1242                 ret = -EIO;
1243                 goto exit;
1244         }
1245
1246         len = tty_buffer_request_room(tty, size);
1247         if (len > 0) {
1248                 tty_insert_flip_string(tty, packet, len);
1249                 tty_flip_buffer_push(port->port_tty);
1250                 wake_up_interruptible(&port->port_tty->read_wait);
1251         }
1252         ret = 0;
1253 exit:
1254         spin_unlock(&port->port_lock);
1255         return ret;
1256 }
1257
1258 /*
1259 * gs_read_complete
1260 */
1261 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1262 {
1263         int ret;
1264         struct gs_dev *dev = ep->driver_data;
1265
1266         if (dev == NULL) {
1267                 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1268                 return;
1269         }
1270
1271         switch(req->status) {
1272         case 0:
1273                 /* normal completion */
1274                 gs_recv_packet(dev, req->buf, req->actual);
1275 requeue:
1276                 req->length = ep->maxpacket;
1277                 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1278                         printk(KERN_ERR
1279                         "gs_read_complete: cannot queue read request, ret=%d\n",
1280                                 ret);
1281                 }
1282                 break;
1283
1284         case -ESHUTDOWN:
1285                 /* disconnect */
1286                 gs_debug("gs_read_complete: shutdown\n");
1287                 gs_free_req(ep, req);
1288                 break;
1289
1290         default:
1291                 /* unexpected */
1292                 printk(KERN_ERR
1293                 "gs_read_complete: unexpected status error, status=%d\n",
1294                         req->status);
1295                 goto requeue;
1296                 break;
1297         }
1298 }
1299
1300 /*
1301 * gs_write_complete
1302 */
1303 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1304 {
1305         struct gs_dev *dev = ep->driver_data;
1306         struct gs_req_entry *gs_req = req->context;
1307
1308         if (dev == NULL) {
1309                 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1310                 return;
1311         }
1312
1313         switch(req->status) {
1314         case 0:
1315                 /* normal completion */
1316 requeue:
1317                 if (gs_req == NULL) {
1318                         printk(KERN_ERR
1319                                 "gs_write_complete: NULL request pointer\n");
1320                         return;
1321                 }
1322
1323                 spin_lock(&dev->dev_lock);
1324                 list_add(&gs_req->re_entry, &dev->dev_req_list);
1325                 spin_unlock(&dev->dev_lock);
1326
1327                 gs_send(dev);
1328
1329                 break;
1330
1331         case -ESHUTDOWN:
1332                 /* disconnect */
1333                 gs_debug("gs_write_complete: shutdown\n");
1334                 gs_free_req(ep, req);
1335                 break;
1336
1337         default:
1338                 printk(KERN_ERR
1339                 "gs_write_complete: unexpected status error, status=%d\n",
1340                         req->status);
1341                 goto requeue;
1342                 break;
1343         }
1344 }
1345
1346 /* Gadget Driver */
1347
1348 /*
1349  * gs_bind
1350  *
1351  * Called on module load.  Allocates and initializes the device
1352  * structure and a control request.
1353  */
1354 static int __init gs_bind(struct usb_gadget *gadget)
1355 {
1356         int ret;
1357         struct usb_ep *ep;
1358         struct gs_dev *dev;
1359         int gcnum;
1360
1361         /* Some controllers can't support CDC ACM:
1362          * - sh doesn't support multiple interfaces or configs;
1363          * - sa1100 doesn't have a third interrupt endpoint
1364          */
1365         if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1366                 use_acm = 0;
1367
1368         gcnum = usb_gadget_controller_number(gadget);
1369         if (gcnum >= 0)
1370                 gs_device_desc.bcdDevice =
1371                                 cpu_to_le16(GS_VERSION_NUM | gcnum);
1372         else {
1373                 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1374                         gadget->name);
1375                 /* unrecognized, but safe unless bulk is REALLY quirky */
1376                 gs_device_desc.bcdDevice =
1377                         __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1378         }
1379
1380         usb_ep_autoconfig_reset(gadget);
1381
1382         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1383         if (!ep)
1384                 goto autoconf_fail;
1385         EP_IN_NAME = ep->name;
1386         ep->driver_data = ep;   /* claim the endpoint */
1387
1388         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1389         if (!ep)
1390                 goto autoconf_fail;
1391         EP_OUT_NAME = ep->name;
1392         ep->driver_data = ep;   /* claim the endpoint */
1393
1394         if (use_acm) {
1395                 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1396                 if (!ep) {
1397                         printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1398                         goto autoconf_fail;
1399                 }
1400                 gs_device_desc.idProduct = __constant_cpu_to_le16(
1401                                                 GS_CDC_PRODUCT_ID),
1402                 EP_NOTIFY_NAME = ep->name;
1403                 ep->driver_data = ep;   /* claim the endpoint */
1404         }
1405
1406         gs_device_desc.bDeviceClass = use_acm
1407                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1408         gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1409
1410 #ifdef CONFIG_USB_GADGET_DUALSPEED
1411         gs_qualifier_desc.bDeviceClass = use_acm
1412                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1413         /* assume ep0 uses the same packet size for both speeds */
1414         gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1415         /* assume endpoints are dual-speed */
1416         gs_highspeed_notify_desc.bEndpointAddress =
1417                 gs_fullspeed_notify_desc.bEndpointAddress;
1418         gs_highspeed_in_desc.bEndpointAddress =
1419                 gs_fullspeed_in_desc.bEndpointAddress;
1420         gs_highspeed_out_desc.bEndpointAddress =
1421                 gs_fullspeed_out_desc.bEndpointAddress;
1422 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1423
1424         usb_gadget_set_selfpowered(gadget);
1425
1426         if (gadget->is_otg) {
1427                 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1428                 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1429                 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1430         }
1431
1432         gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1433         if (dev == NULL)
1434                 return -ENOMEM;
1435
1436         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1437                 init_utsname()->sysname, init_utsname()->release,
1438                 gadget->name);
1439
1440         memset(dev, 0, sizeof(struct gs_dev));
1441         dev->dev_gadget = gadget;
1442         spin_lock_init(&dev->dev_lock);
1443         INIT_LIST_HEAD(&dev->dev_req_list);
1444         set_gadget_data(gadget, dev);
1445
1446         if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1447                 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1448                 gs_unbind(gadget);
1449                 return ret;
1450         }
1451
1452         /* preallocate control response and buffer */
1453         dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1454                 GFP_KERNEL);
1455         if (dev->dev_ctrl_req == NULL) {
1456                 gs_unbind(gadget);
1457                 return -ENOMEM;
1458         }
1459         dev->dev_ctrl_req->complete = gs_setup_complete;
1460
1461         gadget->ep0->driver_data = dev;
1462
1463         printk(KERN_INFO "gs_bind: %s %s bound\n",
1464                 GS_LONG_NAME, GS_VERSION_STR);
1465
1466         return 0;
1467
1468 autoconf_fail:
1469         printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1470         return -ENODEV;
1471 }
1472
1473 /*
1474  * gs_unbind
1475  *
1476  * Called on module unload.  Frees the control request and device
1477  * structure.
1478  */
1479 static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
1480 {
1481         struct gs_dev *dev = get_gadget_data(gadget);
1482
1483         gs_device = NULL;
1484
1485         /* read/write requests already freed, only control request remains */
1486         if (dev != NULL) {
1487                 if (dev->dev_ctrl_req != NULL) {
1488                         gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1489                         dev->dev_ctrl_req = NULL;
1490                 }
1491                 gs_free_ports(dev);
1492                 kfree(dev);
1493                 set_gadget_data(gadget, NULL);
1494         }
1495
1496         printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1497                 GS_VERSION_STR);
1498 }
1499
1500 /*
1501  * gs_setup
1502  *
1503  * Implements all the control endpoint functionality that's not
1504  * handled in hardware or the hardware driver.
1505  *
1506  * Returns the size of the data sent to the host, or a negative
1507  * error number.
1508  */
1509 static int gs_setup(struct usb_gadget *gadget,
1510         const struct usb_ctrlrequest *ctrl)
1511 {
1512         int ret = -EOPNOTSUPP;
1513         struct gs_dev *dev = get_gadget_data(gadget);
1514         struct usb_request *req = dev->dev_ctrl_req;
1515         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1516         u16 wValue = le16_to_cpu(ctrl->wValue);
1517         u16 wLength = le16_to_cpu(ctrl->wLength);
1518
1519         switch (ctrl->bRequestType & USB_TYPE_MASK) {
1520         case USB_TYPE_STANDARD:
1521                 ret = gs_setup_standard(gadget,ctrl);
1522                 break;
1523
1524         case USB_TYPE_CLASS:
1525                 ret = gs_setup_class(gadget,ctrl);
1526                 break;
1527
1528         default:
1529                 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1530                         ctrl->bRequestType, ctrl->bRequest,
1531                         wValue, wIndex, wLength);
1532                 break;
1533         }
1534
1535         /* respond with data transfer before status phase? */
1536         if (ret >= 0) {
1537                 req->length = ret;
1538                 req->zero = ret < wLength
1539                                 && (ret % gadget->ep0->maxpacket) == 0;
1540                 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1541                 if (ret < 0) {
1542                         printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1543                                 ret);
1544                         req->status = 0;
1545                         gs_setup_complete(gadget->ep0, req);
1546                 }
1547         }
1548
1549         /* device either stalls (ret < 0) or reports success */
1550         return ret;
1551 }
1552
1553 static int gs_setup_standard(struct usb_gadget *gadget,
1554         const struct usb_ctrlrequest *ctrl)
1555 {
1556         int ret = -EOPNOTSUPP;
1557         struct gs_dev *dev = get_gadget_data(gadget);
1558         struct usb_request *req = dev->dev_ctrl_req;
1559         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1560         u16 wValue = le16_to_cpu(ctrl->wValue);
1561         u16 wLength = le16_to_cpu(ctrl->wLength);
1562
1563         switch (ctrl->bRequest) {
1564         case USB_REQ_GET_DESCRIPTOR:
1565                 if (ctrl->bRequestType != USB_DIR_IN)
1566                         break;
1567
1568                 switch (wValue >> 8) {
1569                 case USB_DT_DEVICE:
1570                         ret = min(wLength,
1571                                 (u16)sizeof(struct usb_device_descriptor));
1572                         memcpy(req->buf, &gs_device_desc, ret);
1573                         break;
1574
1575 #ifdef CONFIG_USB_GADGET_DUALSPEED
1576                 case USB_DT_DEVICE_QUALIFIER:
1577                         if (!gadget->is_dualspeed)
1578                                 break;
1579                         ret = min(wLength,
1580                                 (u16)sizeof(struct usb_qualifier_descriptor));
1581                         memcpy(req->buf, &gs_qualifier_desc, ret);
1582                         break;
1583
1584                 case USB_DT_OTHER_SPEED_CONFIG:
1585                         if (!gadget->is_dualspeed)
1586                                 break;
1587                         /* fall through */
1588 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1589                 case USB_DT_CONFIG:
1590                         ret = gs_build_config_buf(req->buf, gadget->speed,
1591                                 wValue >> 8, wValue & 0xff,
1592                                 gadget->is_otg);
1593                         if (ret >= 0)
1594                                 ret = min(wLength, (u16)ret);
1595                         break;
1596
1597                 case USB_DT_STRING:
1598                         /* wIndex == language code. */
1599                         ret = usb_gadget_get_string(&gs_string_table,
1600                                 wValue & 0xff, req->buf);
1601                         if (ret >= 0)
1602                                 ret = min(wLength, (u16)ret);
1603                         break;
1604                 }
1605                 break;
1606
1607         case USB_REQ_SET_CONFIGURATION:
1608                 if (ctrl->bRequestType != 0)
1609                         break;
1610                 spin_lock(&dev->dev_lock);
1611                 ret = gs_set_config(dev, wValue);
1612                 spin_unlock(&dev->dev_lock);
1613                 break;
1614
1615         case USB_REQ_GET_CONFIGURATION:
1616                 if (ctrl->bRequestType != USB_DIR_IN)
1617                         break;
1618                 *(u8 *)req->buf = dev->dev_config;
1619                 ret = min(wLength, (u16)1);
1620                 break;
1621
1622         case USB_REQ_SET_INTERFACE:
1623                 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1624                                 || !dev->dev_config
1625                                 || wIndex >= GS_MAX_NUM_INTERFACES)
1626                         break;
1627                 if (dev->dev_config == GS_BULK_CONFIG_ID
1628                                 && wIndex != GS_BULK_INTERFACE_ID)
1629                         break;
1630                 /* no alternate interface settings */
1631                 if (wValue != 0)
1632                         break;
1633                 spin_lock(&dev->dev_lock);
1634                 /* PXA hardware partially handles SET_INTERFACE;
1635                  * we need to kluge around that interference.  */
1636                 if (gadget_is_pxa(gadget)) {
1637                         ret = gs_set_config(dev, use_acm ?
1638                                 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1639                         goto set_interface_done;
1640                 }
1641                 if (dev->dev_config != GS_BULK_CONFIG_ID
1642                                 && wIndex == GS_CONTROL_INTERFACE_ID) {
1643                         if (dev->dev_notify_ep) {
1644                                 usb_ep_disable(dev->dev_notify_ep);
1645                                 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1646                         }
1647                 } else {
1648                         usb_ep_disable(dev->dev_in_ep);
1649                         usb_ep_disable(dev->dev_out_ep);
1650                         usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1651                         usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1652                 }
1653                 ret = 0;
1654 set_interface_done:
1655                 spin_unlock(&dev->dev_lock);
1656                 break;
1657
1658         case USB_REQ_GET_INTERFACE:
1659                 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1660                 || dev->dev_config == GS_NO_CONFIG_ID)
1661                         break;
1662                 if (wIndex >= GS_MAX_NUM_INTERFACES
1663                                 || (dev->dev_config == GS_BULK_CONFIG_ID
1664                                 && wIndex != GS_BULK_INTERFACE_ID)) {
1665                         ret = -EDOM;
1666                         break;
1667                 }
1668                 /* no alternate interface settings */
1669                 *(u8 *)req->buf = 0;
1670                 ret = min(wLength, (u16)1);
1671                 break;
1672
1673         default:
1674                 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1675                         ctrl->bRequestType, ctrl->bRequest,
1676                         wValue, wIndex, wLength);
1677                 break;
1678         }
1679
1680         return ret;
1681 }
1682
1683 static int gs_setup_class(struct usb_gadget *gadget,
1684         const struct usb_ctrlrequest *ctrl)
1685 {
1686         int ret = -EOPNOTSUPP;
1687         struct gs_dev *dev = get_gadget_data(gadget);
1688         struct gs_port *port = dev->dev_port[0];        /* ACM only has one port */
1689         struct usb_request *req = dev->dev_ctrl_req;
1690         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1691         u16 wValue = le16_to_cpu(ctrl->wValue);
1692         u16 wLength = le16_to_cpu(ctrl->wLength);
1693
1694         switch (ctrl->bRequest) {
1695         case USB_CDC_REQ_SET_LINE_CODING:
1696                 ret = min(wLength,
1697                         (u16)sizeof(struct usb_cdc_line_coding));
1698                 if (port) {
1699                         spin_lock(&port->port_lock);
1700                         memcpy(&port->port_line_coding, req->buf, ret);
1701                         spin_unlock(&port->port_lock);
1702                 }
1703                 break;
1704
1705         case USB_CDC_REQ_GET_LINE_CODING:
1706                 port = dev->dev_port[0];        /* ACM only has one port */
1707                 ret = min(wLength,
1708                         (u16)sizeof(struct usb_cdc_line_coding));
1709                 if (port) {
1710                         spin_lock(&port->port_lock);
1711                         memcpy(req->buf, &port->port_line_coding, ret);
1712                         spin_unlock(&port->port_lock);
1713                 }
1714                 break;
1715
1716         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1717                 ret = 0;
1718                 break;
1719
1720         default:
1721                 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1722                         ctrl->bRequestType, ctrl->bRequest,
1723                         wValue, wIndex, wLength);
1724                 break;
1725         }
1726
1727         return ret;
1728 }
1729
1730 /*
1731  * gs_setup_complete
1732  */
1733 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1734 {
1735         if (req->status || req->actual != req->length) {
1736                 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1737                         req->status, req->actual, req->length);
1738         }
1739 }
1740
1741 /*
1742  * gs_disconnect
1743  *
1744  * Called when the device is disconnected.  Frees the closed
1745  * ports and disconnects open ports.  Open ports will be freed
1746  * on close.  Then reallocates the ports for the next connection.
1747  */
1748 static void gs_disconnect(struct usb_gadget *gadget)
1749 {
1750         unsigned long flags;
1751         struct gs_dev *dev = get_gadget_data(gadget);
1752
1753         spin_lock_irqsave(&dev->dev_lock, flags);
1754
1755         gs_reset_config(dev);
1756
1757         /* free closed ports and disconnect open ports */
1758         /* (open ports will be freed when closed) */
1759         gs_free_ports(dev);
1760
1761         /* re-allocate ports for the next connection */
1762         if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1763                 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1764
1765         spin_unlock_irqrestore(&dev->dev_lock, flags);
1766
1767         printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1768 }
1769
1770 /*
1771  * gs_set_config
1772  *
1773  * Configures the device by enabling device specific
1774  * optimizations, setting up the endpoints, allocating
1775  * read and write requests and queuing read requests.
1776  *
1777  * The device lock must be held when calling this function.
1778  */
1779 static int gs_set_config(struct gs_dev *dev, unsigned config)
1780 {
1781         int i;
1782         int ret = 0;
1783         struct usb_gadget *gadget = dev->dev_gadget;
1784         struct usb_ep *ep;
1785         struct usb_endpoint_descriptor *ep_desc;
1786         struct usb_request *req;
1787         struct gs_req_entry *req_entry;
1788
1789         if (dev == NULL) {
1790                 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1791                 return 0;
1792         }
1793
1794         if (config == dev->dev_config)
1795                 return 0;
1796
1797         gs_reset_config(dev);
1798
1799         switch (config) {
1800         case GS_NO_CONFIG_ID:
1801                 return 0;
1802         case GS_BULK_CONFIG_ID:
1803                 if (use_acm)
1804                         return -EINVAL;
1805                 /* device specific optimizations */
1806                 if (gadget_is_net2280(gadget))
1807                         net2280_set_fifo_mode(gadget, 1);
1808                 break;
1809         case GS_ACM_CONFIG_ID:
1810                 if (!use_acm)
1811                         return -EINVAL;
1812                 /* device specific optimizations */
1813                 if (gadget_is_net2280(gadget))
1814                         net2280_set_fifo_mode(gadget, 1);
1815                 break;
1816         default:
1817                 return -EINVAL;
1818         }
1819
1820         dev->dev_config = config;
1821
1822         gadget_for_each_ep(ep, gadget) {
1823
1824                 if (EP_NOTIFY_NAME
1825                 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1826                         ep_desc = GS_SPEED_SELECT(
1827                                 gadget->speed == USB_SPEED_HIGH,
1828                                 &gs_highspeed_notify_desc,
1829                                 &gs_fullspeed_notify_desc);
1830                         ret = usb_ep_enable(ep,ep_desc);
1831                         if (ret == 0) {
1832                                 ep->driver_data = dev;
1833                                 dev->dev_notify_ep = ep;
1834                                 dev->dev_notify_ep_desc = ep_desc;
1835                         } else {
1836                                 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1837                                         ep->name, ret);
1838                                 goto exit_reset_config;
1839                         }
1840                 }
1841
1842                 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1843                         ep_desc = GS_SPEED_SELECT(
1844                                 gadget->speed == USB_SPEED_HIGH,
1845                                 &gs_highspeed_in_desc,
1846                                 &gs_fullspeed_in_desc);
1847                         ret = usb_ep_enable(ep,ep_desc);
1848                         if (ret == 0) {
1849                                 ep->driver_data = dev;
1850                                 dev->dev_in_ep = ep;
1851                                 dev->dev_in_ep_desc = ep_desc;
1852                         } else {
1853                                 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1854                                         ep->name, ret);
1855                                 goto exit_reset_config;
1856                         }
1857                 }
1858
1859                 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1860                         ep_desc = GS_SPEED_SELECT(
1861                                 gadget->speed == USB_SPEED_HIGH,
1862                                 &gs_highspeed_out_desc,
1863                                 &gs_fullspeed_out_desc);
1864                         ret = usb_ep_enable(ep,ep_desc);
1865                         if (ret == 0) {
1866                                 ep->driver_data = dev;
1867                                 dev->dev_out_ep = ep;
1868                                 dev->dev_out_ep_desc = ep_desc;
1869                         } else {
1870                                 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1871                                         ep->name, ret);
1872                                 goto exit_reset_config;
1873                         }
1874                 }
1875
1876         }
1877
1878         if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1879         || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1880                 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1881                 ret = -ENODEV;
1882                 goto exit_reset_config;
1883         }
1884
1885         /* allocate and queue read requests */
1886         ep = dev->dev_out_ep;
1887         for (i=0; i<read_q_size && ret == 0; i++) {
1888                 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1889                         req->complete = gs_read_complete;
1890                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1891                                 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1892                                         ret);
1893                         }
1894                 } else {
1895                         printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1896                         ret = -ENOMEM;
1897                         goto exit_reset_config;
1898                 }
1899         }
1900
1901         /* allocate write requests, and put on free list */
1902         ep = dev->dev_in_ep;
1903         for (i=0; i<write_q_size; i++) {
1904                 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1905                         req_entry->re_req->complete = gs_write_complete;
1906                         list_add(&req_entry->re_entry, &dev->dev_req_list);
1907                 } else {
1908                         printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1909                         ret = -ENOMEM;
1910                         goto exit_reset_config;
1911                 }
1912         }
1913
1914         printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1915                 GS_LONG_NAME,
1916                 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1917                 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1918
1919         return 0;
1920
1921 exit_reset_config:
1922         gs_reset_config(dev);
1923         return ret;
1924 }
1925
1926 /*
1927  * gs_reset_config
1928  *
1929  * Mark the device as not configured, disable all endpoints,
1930  * which forces completion of pending I/O and frees queued
1931  * requests, and free the remaining write requests on the
1932  * free list.
1933  *
1934  * The device lock must be held when calling this function.
1935  */
1936 static void gs_reset_config(struct gs_dev *dev)
1937 {
1938         struct gs_req_entry *req_entry;
1939
1940         if (dev == NULL) {
1941                 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
1942                 return;
1943         }
1944
1945         if (dev->dev_config == GS_NO_CONFIG_ID)
1946                 return;
1947
1948         dev->dev_config = GS_NO_CONFIG_ID;
1949
1950         /* free write requests on the free list */
1951         while(!list_empty(&dev->dev_req_list)) {
1952                 req_entry = list_entry(dev->dev_req_list.next,
1953                         struct gs_req_entry, re_entry);
1954                 list_del(&req_entry->re_entry);
1955                 gs_free_req_entry(dev->dev_in_ep, req_entry);
1956         }
1957
1958         /* disable endpoints, forcing completion of pending i/o; */
1959         /* completion handlers free their requests in this case */
1960         if (dev->dev_notify_ep) {
1961                 usb_ep_disable(dev->dev_notify_ep);
1962                 dev->dev_notify_ep = NULL;
1963         }
1964         if (dev->dev_in_ep) {
1965                 usb_ep_disable(dev->dev_in_ep);
1966                 dev->dev_in_ep = NULL;
1967         }
1968         if (dev->dev_out_ep) {
1969                 usb_ep_disable(dev->dev_out_ep);
1970                 dev->dev_out_ep = NULL;
1971         }
1972 }
1973
1974 /*
1975  * gs_build_config_buf
1976  *
1977  * Builds the config descriptors in the given buffer and returns the
1978  * length, or a negative error number.
1979  */
1980 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
1981         u8 type, unsigned int index, int is_otg)
1982 {
1983         int len;
1984         int high_speed;
1985         const struct usb_config_descriptor *config_desc;
1986         const struct usb_descriptor_header **function;
1987
1988         if (index >= gs_device_desc.bNumConfigurations)
1989                 return -EINVAL;
1990
1991         /* other speed switches high and full speed */
1992         high_speed = (speed == USB_SPEED_HIGH);
1993         if (type == USB_DT_OTHER_SPEED_CONFIG)
1994                 high_speed = !high_speed;
1995
1996         if (use_acm) {
1997                 config_desc = &gs_acm_config_desc;
1998                 function = GS_SPEED_SELECT(high_speed,
1999                         gs_acm_highspeed_function,
2000                         gs_acm_fullspeed_function);
2001         } else {
2002                 config_desc = &gs_bulk_config_desc;
2003                 function = GS_SPEED_SELECT(high_speed,
2004                         gs_bulk_highspeed_function,
2005                         gs_bulk_fullspeed_function);
2006         }
2007
2008         /* for now, don't advertise srp-only devices */
2009         if (!is_otg)
2010                 function++;
2011
2012         len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2013         if (len < 0)
2014                 return len;
2015
2016         ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2017
2018         return len;
2019 }
2020
2021 /*
2022  * gs_alloc_req
2023  *
2024  * Allocate a usb_request and its buffer.  Returns a pointer to the
2025  * usb_request or NULL if there is an error.
2026  */
2027 static struct usb_request *
2028 gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
2029 {
2030         struct usb_request *req;
2031
2032         if (ep == NULL)
2033                 return NULL;
2034
2035         req = usb_ep_alloc_request(ep, kmalloc_flags);
2036
2037         if (req != NULL) {
2038                 req->length = len;
2039                 req->buf = kmalloc(len, kmalloc_flags);
2040                 if (req->buf == NULL) {
2041                         usb_ep_free_request(ep, req);
2042                         return NULL;
2043                 }
2044         }
2045
2046         return req;
2047 }
2048
2049 /*
2050  * gs_free_req
2051  *
2052  * Free a usb_request and its buffer.
2053  */
2054 static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2055 {
2056         if (ep != NULL && req != NULL) {
2057                 kfree(req->buf);
2058                 usb_ep_free_request(ep, req);
2059         }
2060 }
2061
2062 /*
2063  * gs_alloc_req_entry
2064  *
2065  * Allocates a request and its buffer, using the given
2066  * endpoint, buffer len, and kmalloc flags.
2067  */
2068 static struct gs_req_entry *
2069 gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
2070 {
2071         struct gs_req_entry     *req;
2072
2073         req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2074         if (req == NULL)
2075                 return NULL;
2076
2077         req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2078         if (req->re_req == NULL) {
2079                 kfree(req);
2080                 return NULL;
2081         }
2082
2083         req->re_req->context = req;
2084
2085         return req;
2086 }
2087
2088 /*
2089  * gs_free_req_entry
2090  *
2091  * Frees a request and its buffer.
2092  */
2093 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2094 {
2095         if (ep != NULL && req != NULL) {
2096                 if (req->re_req != NULL)
2097                         gs_free_req(ep, req->re_req);
2098                 kfree(req);
2099         }
2100 }
2101
2102 /*
2103  * gs_alloc_ports
2104  *
2105  * Allocate all ports and set the gs_dev struct to point to them.
2106  * Return 0 if successful, or a negative error number.
2107  *
2108  * The device lock is normally held when calling this function.
2109  */
2110 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
2111 {
2112         int i;
2113         struct gs_port *port;
2114
2115         if (dev == NULL)
2116                 return -EIO;
2117
2118         for (i=0; i<GS_NUM_PORTS; i++) {
2119                 if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2120                         return -ENOMEM;
2121
2122                 port->port_dev = dev;
2123                 port->port_num = i;
2124                 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2125                 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2126                 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2127                 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2128                 spin_lock_init(&port->port_lock);
2129                 init_waitqueue_head(&port->port_write_wait);
2130
2131                 dev->dev_port[i] = port;
2132         }
2133
2134         return 0;
2135 }
2136
2137 /*
2138  * gs_free_ports
2139  *
2140  * Free all closed ports.  Open ports are disconnected by
2141  * freeing their write buffers, setting their device pointers
2142  * and the pointers to them in the device to NULL.  These
2143  * ports will be freed when closed.
2144  *
2145  * The device lock is normally held when calling this function.
2146  */
2147 static void gs_free_ports(struct gs_dev *dev)
2148 {
2149         int i;
2150         unsigned long flags;
2151         struct gs_port *port;
2152
2153         if (dev == NULL)
2154                 return;
2155
2156         for (i=0; i<GS_NUM_PORTS; i++) {
2157                 if ((port=dev->dev_port[i]) != NULL) {
2158                         dev->dev_port[i] = NULL;
2159
2160                         spin_lock_irqsave(&port->port_lock, flags);
2161
2162                         if (port->port_write_buf != NULL) {
2163                                 gs_buf_free(port->port_write_buf);
2164                                 port->port_write_buf = NULL;
2165                         }
2166
2167                         if (port->port_open_count > 0 || port->port_in_use) {
2168                                 port->port_dev = NULL;
2169                                 wake_up_interruptible(&port->port_write_wait);
2170                                 if (port->port_tty) {
2171                                         wake_up_interruptible(&port->port_tty->read_wait);
2172                                         wake_up_interruptible(&port->port_tty->write_wait);
2173                                 }
2174                                 spin_unlock_irqrestore(&port->port_lock, flags);
2175                         } else {
2176                                 spin_unlock_irqrestore(&port->port_lock, flags);
2177                                 kfree(port);
2178                         }
2179
2180                 }
2181         }
2182 }
2183
2184 /* Circular Buffer */
2185
2186 /*
2187  * gs_buf_alloc
2188  *
2189  * Allocate a circular buffer and all associated memory.
2190  */
2191 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
2192 {
2193         struct gs_buf *gb;
2194
2195         if (size == 0)
2196                 return NULL;
2197
2198         gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2199         if (gb == NULL)
2200                 return NULL;
2201
2202         gb->buf_buf = kmalloc(size, kmalloc_flags);
2203         if (gb->buf_buf == NULL) {
2204                 kfree(gb);
2205                 return NULL;
2206         }
2207
2208         gb->buf_size = size;
2209         gb->buf_get = gb->buf_put = gb->buf_buf;
2210
2211         return gb;
2212 }
2213
2214 /*
2215  * gs_buf_free
2216  *
2217  * Free the buffer and all associated memory.
2218  */
2219 void gs_buf_free(struct gs_buf *gb)
2220 {
2221         if (gb) {
2222                 kfree(gb->buf_buf);
2223                 kfree(gb);
2224         }
2225 }
2226
2227 /*
2228  * gs_buf_clear
2229  *
2230  * Clear out all data in the circular buffer.
2231  */
2232 void gs_buf_clear(struct gs_buf *gb)
2233 {
2234         if (gb != NULL)
2235                 gb->buf_get = gb->buf_put;
2236                 /* equivalent to a get of all data available */
2237 }
2238
2239 /*
2240  * gs_buf_data_avail
2241  *
2242  * Return the number of bytes of data available in the circular
2243  * buffer.
2244  */
2245 unsigned int gs_buf_data_avail(struct gs_buf *gb)
2246 {
2247         if (gb != NULL)
2248                 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2249         else
2250                 return 0;
2251 }
2252
2253 /*
2254  * gs_buf_space_avail
2255  *
2256  * Return the number of bytes of space available in the circular
2257  * buffer.
2258  */
2259 unsigned int gs_buf_space_avail(struct gs_buf *gb)
2260 {
2261         if (gb != NULL)
2262                 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2263         else
2264                 return 0;
2265 }
2266
2267 /*
2268  * gs_buf_put
2269  *
2270  * Copy data data from a user buffer and put it into the circular buffer.
2271  * Restrict to the amount of space available.
2272  *
2273  * Return the number of bytes copied.
2274  */
2275 unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2276 {
2277         unsigned int len;
2278
2279         if (gb == NULL)
2280                 return 0;
2281
2282         len  = gs_buf_space_avail(gb);
2283         if (count > len)
2284                 count = len;
2285
2286         if (count == 0)
2287                 return 0;
2288
2289         len = gb->buf_buf + gb->buf_size - gb->buf_put;
2290         if (count > len) {
2291                 memcpy(gb->buf_put, buf, len);
2292                 memcpy(gb->buf_buf, buf+len, count - len);
2293                 gb->buf_put = gb->buf_buf + count - len;
2294         } else {
2295                 memcpy(gb->buf_put, buf, count);
2296                 if (count < len)
2297                         gb->buf_put += count;
2298                 else /* count == len */
2299                         gb->buf_put = gb->buf_buf;
2300         }
2301
2302         return count;
2303 }
2304
2305 /*
2306  * gs_buf_get
2307  *
2308  * Get data from the circular buffer and copy to the given buffer.
2309  * Restrict to the amount of data available.
2310  *
2311  * Return the number of bytes copied.
2312  */
2313 unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2314 {
2315         unsigned int len;
2316
2317         if (gb == NULL)
2318                 return 0;
2319
2320         len = gs_buf_data_avail(gb);
2321         if (count > len)
2322                 count = len;
2323
2324         if (count == 0)
2325                 return 0;
2326
2327         len = gb->buf_buf + gb->buf_size - gb->buf_get;
2328         if (count > len) {
2329                 memcpy(buf, gb->buf_get, len);
2330                 memcpy(buf+len, gb->buf_buf, count - len);
2331                 gb->buf_get = gb->buf_buf + count - len;
2332         } else {
2333                 memcpy(buf, gb->buf_get, count);
2334                 if (count < len)
2335                         gb->buf_get += count;
2336                 else /* count == len */
2337                         gb->buf_get = gb->buf_buf;
2338         }
2339
2340         return count;
2341 }