drivers/usb/core/hcd-pci.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright David Brownell 2000-2002
   4  */
   5
   6 #include <linux/kernel.h>
   7 #include <linux/module.h>
   8 #include <linux/pci.h>
   9 #include <linux/usb.h>
  10 #include <linux/usb/hcd.h>
  11
  12 #include <asm/io.h>
  13 #include <asm/irq.h>
  14
  15 #ifdef CONFIG_PPC_PMAC
  16 #include <asm/machdep.h>
  17 #include <asm/pmac_feature.h>
  18 #include <asm/prom.h>
  19 #endif
  20
  21 #include "usb.h"
  22
  23
  24 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
  25
  26 /*
  27  * Coordinate handoffs between EHCI and companion controllers
  28  * during EHCI probing and system resume.
  29  */
  30
  31 static DECLARE_RWSEM(companions_rwsem);
  32
  33 #define CL_UHCI         PCI_CLASS_SERIAL_USB_UHCI
  34 #define CL_OHCI         PCI_CLASS_SERIAL_USB_OHCI
  35 #define CL_EHCI         PCI_CLASS_SERIAL_USB_EHCI
  36
  37 static inline int is_ohci_or_uhci(struct pci_dev *pdev)
  38 {
  39         return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
  40 }
  41
  42 typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
  43                 struct pci_dev *companion, struct usb_hcd *companion_hcd);
  44
  45 /* Iterate over PCI devices in the same slot as pdev and call fn for each */
  46 static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
  47                 companion_fn fn)
  48 {
  49         struct pci_dev          *companion;
  50         struct usb_hcd          *companion_hcd;
  51         unsigned int            slot = PCI_SLOT(pdev->devfn);
  52
  53         /*
  54          * Iterate through other PCI functions in the same slot.
  55          * If the function's drvdata isn't set then it isn't bound to
  56          * a USB host controller driver, so skip it.
  57          */
  58         companion = NULL;
  59         for_each_pci_dev(companion) {
  60                 if (companion->bus != pdev->bus ||
  61                                 PCI_SLOT(companion->devfn) != slot)
  62                         continue;
  63
  64                 /*
  65                  * Companion device should be either UHCI,OHCI or EHCI host
  66                  * controller, otherwise skip.
  67                  */
  68                 if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
  69                                 companion->class != CL_EHCI)
  70                         continue;
  71
  72                 companion_hcd = pci_get_drvdata(companion);
  73                 if (!companion_hcd || !companion_hcd->self.root_hub)
  74                         continue;
  75                 fn(pdev, hcd, companion, companion_hcd);
  76         }
  77 }
  78
  79 /*
  80  * We're about to add an EHCI controller, which will unceremoniously grab
  81  * all the port connections away from its companions.  To prevent annoying
  82  * error messages, lock the companion's root hub and gracefully unconfigure
  83  * it beforehand.  Leave it locked until the EHCI controller is all set.
  84  */
  85 static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
  86                 struct pci_dev *companion, struct usb_hcd *companion_hcd)
  87 {
  88         struct usb_device *udev;
  89
  90         if (is_ohci_or_uhci(companion)) {
  91                 udev = companion_hcd->self.root_hub;
  92                 usb_lock_device(udev);
  93                 usb_set_configuration(udev, 0);
  94         }
  95 }
  96
  97 /*
  98  * Adding the EHCI controller has either succeeded or failed.  Set the
  99  * companion pointer accordingly, and in either case, reconfigure and
 100  * unlock the root hub.
 101  */
 102 static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
 103                 struct pci_dev *companion, struct usb_hcd *companion_hcd)
 104 {
 105         struct usb_device *udev;
 106
 107         if (is_ohci_or_uhci(companion)) {
 108                 if (dev_get_drvdata(&pdev->dev)) {      /* Succeeded */
 109                         dev_dbg(&pdev->dev, "HS companion for %s\n",
 110                                         dev_name(&companion->dev));
 111                         companion_hcd->self.hs_companion = &hcd->self;
 112                 }
 113                 udev = companion_hcd->self.root_hub;
 114                 usb_set_configuration(udev, 1);
 115                 usb_unlock_device(udev);
 116         }
 117 }
 118
 119 /*
 120  * We just added a non-EHCI controller.  Find the EHCI controller to
 121  * which it is a companion, and store a pointer to the bus structure.
 122  */
 123 static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
 124                 struct pci_dev *companion, struct usb_hcd *companion_hcd)
 125 {
 126         if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
 127                 dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
 128                                 dev_name(&companion->dev));
 129                 hcd->self.hs_companion = &companion_hcd->self;
 130         }
 131 }
 132
 133 /* We are removing an EHCI controller.  Clear the companions' pointers. */
 134 static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
 135                 struct pci_dev *companion, struct usb_hcd *companion_hcd)
 136 {
 137         if (is_ohci_or_uhci(companion))
 138                 companion_hcd->self.hs_companion = NULL;
 139 }
 140
 141 #ifdef  CONFIG_PM
 142
 143 /* An EHCI controller must wait for its companions before resuming. */
 144 static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
 145                 struct pci_dev *companion, struct usb_hcd *companion_hcd)
 146 {
 147         if (is_ohci_or_uhci(companion))
 148                 device_pm_wait_for_dev(&pdev->dev, &companion->dev);
 149 }
 150
 151 #endif  /* CONFIG_PM */
 152
 153 /*-------------------------------------------------------------------------*/
 154
 155 /* configure so an HC device and id are always provided */
 156 /* always called with process context; sleeping is OK */
 157
 158 /**
 159  * usb_hcd_pci_probe - initialize PCI-based HCDs
 160  * @dev: USB Host Controller being probed
 161  * @id: pci hotplug id connecting controller to HCD framework
 162  * Context: !in_interrupt()
 163  *
 164  * Allocates basic PCI resources for this USB host controller, and
 165  * then invokes the start() method for the HCD associated with it
 166  * through the hotplug entry's driver_data.
 167  *
 168  * Store this function in the HCD's struct pci_driver as probe().
 169  *
 170  * Return: 0 if successful.
 171  */
 172 int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 173 {
 174         struct hc_driver        *driver;
 175         struct usb_hcd          *hcd;
 176         int                     retval;
 177         int                     hcd_irq = 0;
 178
 179         if (usb_disabled())
 180                 return -ENODEV;
 181
 182         if (!id)
 183                 return -EINVAL;
 184         driver = (struct hc_driver *)id->driver_data;
 185         if (!driver)
 186                 return -EINVAL;
 187
 188         if (pci_enable_device(dev) < 0)
 189                 return -ENODEV;
 190
 191         /*
 192          * The xHCI driver has its own irq management
 193          * make sure irq setup is not touched for xhci in generic hcd code
 194          */
 195         if ((driver->flags & HCD_MASK) < HCD_USB3) {
 196                 if (!dev->irq) {
 197                         dev_err(&dev->dev,
 198                         "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
 199                                 pci_name(dev));
 200                         retval = -ENODEV;
 201                         goto disable_pci;
 202                 }
 203                 hcd_irq = dev->irq;
 204         }
 205
 206         hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
 207         if (!hcd) {
 208                 retval = -ENOMEM;
 209                 goto disable_pci;
 210         }
 211
 212         hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
 213                         driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
 214
 215         if (driver->flags & HCD_MEMORY) {
 216                 /* EHCI, OHCI */
 217                 hcd->rsrc_start = pci_resource_start(dev, 0);
 218                 hcd->rsrc_len = pci_resource_len(dev, 0);
 219                 if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
 220                                 hcd->rsrc_len, driver->description)) {
 221                         dev_dbg(&dev->dev, "controller already in use\n");
 222                         retval = -EBUSY;
 223                         goto put_hcd;
 224                 }
 225                 hcd->regs = devm_ioremap_nocache(&dev->dev, hcd->rsrc_start,
 226                                 hcd->rsrc_len);
 227                 if (hcd->regs == NULL) {
 228                         dev_dbg(&dev->dev, "error mapping memory\n");
 229                         retval = -EFAULT;
 230                         goto put_hcd;
 231                 }
 232
 233         } else {
 234                 /* UHCI */
 235                 int     region;
 236
 237                 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
 238                         if (!(pci_resource_flags(dev, region) &
 239                                         IORESOURCE_IO))
 240                                 continue;
 241
 242                         hcd->rsrc_start = pci_resource_start(dev, region);
 243                         hcd->rsrc_len = pci_resource_len(dev, region);
 244                         if (devm_request_region(&dev->dev, hcd->rsrc_start,
 245                                         hcd->rsrc_len, driver->description))
 246                                 break;
 247                 }
 248                 if (region == PCI_ROM_RESOURCE) {
 249                         dev_dbg(&dev->dev, "no i/o regions available\n");
 250                         retval = -EBUSY;
 251                         goto put_hcd;
 252                 }
 253         }
 254
 255         pci_set_master(dev);
 256
 257         /* Note: dev_set_drvdata must be called while holding the rwsem */
 258         if (dev->class == CL_EHCI) {
 259                 down_write(&companions_rwsem);
 260                 dev_set_drvdata(&dev->dev, hcd);
 261                 for_each_companion(dev, hcd, ehci_pre_add);
 262                 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
 263                 if (retval != 0)
 264                         dev_set_drvdata(&dev->dev, NULL);
 265                 for_each_companion(dev, hcd, ehci_post_add);
 266                 up_write(&companions_rwsem);
 267         } else {
 268                 down_read(&companions_rwsem);
 269                 dev_set_drvdata(&dev->dev, hcd);
 270                 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
 271                 if (retval != 0)
 272                         dev_set_drvdata(&dev->dev, NULL);
 273                 else
 274                         for_each_companion(dev, hcd, non_ehci_add);
 275                 up_read(&companions_rwsem);
 276         }
 277
 278         if (retval != 0)
 279                 goto put_hcd;
 280         device_wakeup_enable(hcd->self.controller);
 281
 282         if (pci_dev_run_wake(dev))
 283                 pm_runtime_put_noidle(&dev->dev);
 284         return retval;
 285
 286 put_hcd:
 287         usb_put_hcd(hcd);
 288 disable_pci:
 289         pci_disable_device(dev);
 290         dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
 291         return retval;
 292 }
 293 EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
 294
 295
 296 /* may be called without controller electrically present */
 297 /* may be called with controller, bus, and devices active */
 298
 299 /**
 300  * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
 301  * @dev: USB Host Controller being removed
 302  * Context: !in_interrupt()
 303  *
 304  * Reverses the effect of usb_hcd_pci_probe(), first invoking
 305  * the HCD's stop() method.  It is always called from a thread
 306  * context, normally "rmmod", "apmd", or something similar.
 307  *
 308  * Store this function in the HCD's struct pci_driver as remove().
 309  */
 310 void usb_hcd_pci_remove(struct pci_dev *dev)
 311 {
 312         struct usb_hcd          *hcd;
 313
 314         hcd = pci_get_drvdata(dev);
 315         if (!hcd)
 316                 return;
 317
 318         if (pci_dev_run_wake(dev))
 319                 pm_runtime_get_noresume(&dev->dev);
 320
 321         /* Fake an interrupt request in order to give the driver a chance
 322          * to test whether the controller hardware has been removed (e.g.,
 323          * cardbus physical eject).
 324          */
 325         local_irq_disable();
 326         usb_hcd_irq(0, hcd);
 327         local_irq_enable();
 328
 329         /* Note: dev_set_drvdata must be called while holding the rwsem */
 330         if (dev->class == CL_EHCI) {
 331                 down_write(&companions_rwsem);
 332                 for_each_companion(dev, hcd, ehci_remove);
 333                 usb_remove_hcd(hcd);
 334                 dev_set_drvdata(&dev->dev, NULL);
 335                 up_write(&companions_rwsem);
 336         } else {
 337                 /* Not EHCI; just clear the companion pointer */
 338                 down_read(&companions_rwsem);
 339                 hcd->self.hs_companion = NULL;
 340                 usb_remove_hcd(hcd);
 341                 dev_set_drvdata(&dev->dev, NULL);
 342                 up_read(&companions_rwsem);
 343         }
 344         usb_put_hcd(hcd);
 345         pci_disable_device(dev);
 346 }
 347 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
 348
 349 /**
 350  * usb_hcd_pci_shutdown - shutdown host controller
 351  * @dev: USB Host Controller being shutdown
 352  */
 353 void usb_hcd_pci_shutdown(struct pci_dev *dev)
 354 {
 355         struct usb_hcd          *hcd;
 356
 357         hcd = pci_get_drvdata(dev);
 358         if (!hcd)
 359                 return;
 360
 361         if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
 362                         hcd->driver->shutdown) {
 363                 hcd->driver->shutdown(hcd);
 364                 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
 365                         free_irq(hcd->irq, hcd);
 366                 pci_disable_device(dev);
 367         }
 368 }
 369 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 370
 371 #ifdef  CONFIG_PM
 372
 373 #ifdef  CONFIG_PPC_PMAC
 374 static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
 375 {
 376         /* Enanble or disable ASIC clocks for USB */
 377         if (machine_is(powermac)) {
 378                 struct device_node      *of_node;
 379
 380                 of_node = pci_device_to_OF_node(pci_dev);
 381                 if (of_node)
 382                         pmac_call_feature(PMAC_FTR_USB_ENABLE,
 383                                         of_node, 0, enable);
 384         }
 385 }
 386
 387 #else
 388
 389 static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
 390 {}
 391
 392 #endif  /* CONFIG_PPC_PMAC */
 393
 394 static int check_root_hub_suspended(struct device *dev)
 395 {
 396         struct pci_dev          *pci_dev = to_pci_dev(dev);
 397         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 398
 399         if (HCD_RH_RUNNING(hcd)) {
 400                 dev_warn(dev, "Root hub is not suspended\n");
 401                 return -EBUSY;
 402         }
 403         if (hcd->shared_hcd) {
 404                 hcd = hcd->shared_hcd;
 405                 if (HCD_RH_RUNNING(hcd)) {
 406                         dev_warn(dev, "Secondary root hub is not suspended\n");
 407                         return -EBUSY;
 408                 }
 409         }
 410         return 0;
 411 }
 412
 413 static int suspend_common(struct device *dev, bool do_wakeup)
 414 {
 415         struct pci_dev          *pci_dev = to_pci_dev(dev);
 416         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 417         int                     retval;
 418
 419         /* Root hub suspend should have stopped all downstream traffic,
 420          * and all bus master traffic.  And done so for both the interface
 421          * and the stub usb_device (which we check here).  But maybe it
 422          * didn't; writing sysfs power/state files ignores such rules...
 423          */
 424         retval = check_root_hub_suspended(dev);
 425         if (retval)
 426                 return retval;
 427
 428         if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
 429                 /* Optimization: Don't suspend if a root-hub wakeup is
 430                  * pending and it would cause the HCD to wake up anyway.
 431                  */
 432                 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
 433                         return -EBUSY;
 434                 if (do_wakeup && hcd->shared_hcd &&
 435                                 HCD_WAKEUP_PENDING(hcd->shared_hcd))
 436                         return -EBUSY;
 437                 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
 438                 suspend_report_result(hcd->driver->pci_suspend, retval);
 439
 440                 /* Check again in case wakeup raced with pci_suspend */
 441                 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
 442                                 (retval == 0 && do_wakeup && hcd->shared_hcd &&
 443                                  HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
 444                         if (hcd->driver->pci_resume)
 445                                 hcd->driver->pci_resume(hcd, false);
 446                         retval = -EBUSY;
 447                 }
 448                 if (retval)
 449                         return retval;
 450         }
 451
 452         /* If MSI-X is enabled, the driver will have synchronized all vectors
 453          * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
 454          * synchronized here.
 455          */
 456         if (!hcd->msix_enabled)
 457                 synchronize_irq(pci_dev->irq);
 458
 459         /* Downstream ports from this root hub should already be quiesced, so
 460          * there will be no DMA activity.  Now we can shut down the upstream
 461          * link (except maybe for PME# resume signaling).  We'll enter a
 462          * low power state during suspend_noirq, if the hardware allows.
 463          */
 464         pci_disable_device(pci_dev);
 465         return retval;
 466 }
 467
 468 static int resume_common(struct device *dev, int event)
 469 {
 470         struct pci_dev          *pci_dev = to_pci_dev(dev);
 471         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 472         int                     retval;
 473
 474         if (HCD_RH_RUNNING(hcd) ||
 475                         (hcd->shared_hcd &&
 476                          HCD_RH_RUNNING(hcd->shared_hcd))) {
 477                 dev_dbg(dev, "can't resume, not suspended!\n");
 478                 return 0;
 479         }
 480
 481         retval = pci_enable_device(pci_dev);
 482         if (retval < 0) {
 483                 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
 484                 return retval;
 485         }
 486
 487         pci_set_master(pci_dev);
 488
 489         if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
 490
 491                 /*
 492                  * Only EHCI controllers have to wait for their companions.
 493                  * No locking is needed because PCI controller drivers do not
 494                  * get unbound during system resume.
 495                  */
 496                 if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
 497                         for_each_companion(pci_dev, hcd,
 498                                         ehci_wait_for_companions);
 499
 500                 retval = hcd->driver->pci_resume(hcd,
 501                                 event == PM_EVENT_RESTORE);
 502                 if (retval) {
 503                         dev_err(dev, "PCI post-resume error %d!\n", retval);
 504                         usb_hc_died(hcd);
 505                 }
 506         }
 507         return retval;
 508 }
 509
 510 #ifdef  CONFIG_PM_SLEEP
 511
 512 static int hcd_pci_suspend(struct device *dev)
 513 {
 514         return suspend_common(dev, device_may_wakeup(dev));
 515 }
 516
 517 static int hcd_pci_suspend_noirq(struct device *dev)
 518 {
 519         struct pci_dev          *pci_dev = to_pci_dev(dev);
 520         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 521         int                     retval;
 522
 523         retval = check_root_hub_suspended(dev);
 524         if (retval)
 525                 return retval;
 526
 527         pci_save_state(pci_dev);
 528
 529         /* If the root hub is dead rather than suspended, disallow remote
 530          * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 531          * dying, so we only need to check the primary roothub.
 532          */
 533         if (HCD_DEAD(hcd))
 534                 device_set_wakeup_enable(dev, 0);
 535         dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
 536
 537         /* Possibly enable remote wakeup,
 538          * choose the appropriate low-power state, and go to that state.
 539          */
 540         retval = pci_prepare_to_sleep(pci_dev);
 541         if (retval == -EIO) {           /* Low-power not supported */
 542                 dev_dbg(dev, "--> PCI D0 legacy\n");
 543                 retval = 0;
 544         } else if (retval == 0) {
 545                 dev_dbg(dev, "--> PCI %s\n",
 546                                 pci_power_name(pci_dev->current_state));
 547         } else {
 548                 suspend_report_result(pci_prepare_to_sleep, retval);
 549                 return retval;
 550         }
 551
 552         powermac_set_asic(pci_dev, 0);
 553         return retval;
 554 }
 555
 556 static int hcd_pci_resume_noirq(struct device *dev)
 557 {
 558         powermac_set_asic(to_pci_dev(dev), 1);
 559         return 0;
 560 }
 561
 562 static int hcd_pci_resume(struct device *dev)
 563 {
 564         return resume_common(dev, PM_EVENT_RESUME);
 565 }
 566
 567 static int hcd_pci_restore(struct device *dev)
 568 {
 569         return resume_common(dev, PM_EVENT_RESTORE);
 570 }
 571
 572 #else
 573
 574 #define hcd_pci_suspend         NULL
 575 #define hcd_pci_suspend_noirq   NULL
 576 #define hcd_pci_resume_noirq    NULL
 577 #define hcd_pci_resume          NULL
 578 #define hcd_pci_restore         NULL
 579
 580 #endif  /* CONFIG_PM_SLEEP */
 581
 582 static int hcd_pci_runtime_suspend(struct device *dev)
 583 {
 584         int     retval;
 585
 586         retval = suspend_common(dev, true);
 587         if (retval == 0)
 588                 powermac_set_asic(to_pci_dev(dev), 0);
 589         dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
 590         return retval;
 591 }
 592
 593 static int hcd_pci_runtime_resume(struct device *dev)
 594 {
 595         int     retval;
 596
 597         powermac_set_asic(to_pci_dev(dev), 1);
 598         retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
 599         dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
 600         return retval;
 601 }
 602
 603 const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 604         .suspend        = hcd_pci_suspend,
 605         .suspend_noirq  = hcd_pci_suspend_noirq,
 606         .resume_noirq   = hcd_pci_resume_noirq,
 607         .resume         = hcd_pci_resume,
 608         .freeze         = check_root_hub_suspended,
 609         .freeze_noirq   = check_root_hub_suspended,
 610         .thaw_noirq     = NULL,
 611         .thaw           = NULL,
 612         .poweroff       = hcd_pci_suspend,
 613         .poweroff_noirq = hcd_pci_suspend_noirq,
 614         .restore_noirq  = hcd_pci_resume_noirq,
 615         .restore        = hcd_pci_restore,
 616         .runtime_suspend = hcd_pci_runtime_suspend,
 617         .runtime_resume = hcd_pci_runtime_resume,
 618 };
 619 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
 620
 621 #endif  /* CONFIG_PM */