Merge remote-tracking branches 'asoc/topic/wm8524', 'asoc/topic/wm8804' and 'asoc...
[sfrench/cifs-2.6.git] / drivers / staging / iio / resolver / ad2s1210.c
1 /*
2  * ad2s1210.c support for the ADI Resolver to Digital Converters: AD2S1210
3  *
4  * Copyright (c) 2010-2010 Analog Devices Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  */
11 #include <linux/types.h>
12 #include <linux/mutex.h>
13 #include <linux/device.h>
14 #include <linux/spi/spi.h>
15 #include <linux/slab.h>
16 #include <linux/sysfs.h>
17 #include <linux/delay.h>
18 #include <linux/gpio.h>
19 #include <linux/module.h>
20
21 #include <linux/iio/iio.h>
22 #include <linux/iio/sysfs.h>
23 #include "ad2s1210.h"
24
25 #define DRV_NAME "ad2s1210"
26
27 #define AD2S1210_DEF_CONTROL            0x7E
28
29 #define AD2S1210_MSB_IS_HIGH            0x80
30 #define AD2S1210_MSB_IS_LOW             0x7F
31 #define AD2S1210_PHASE_LOCK_RANGE_44    0x20
32 #define AD2S1210_ENABLE_HYSTERESIS      0x10
33 #define AD2S1210_SET_ENRES1             0x08
34 #define AD2S1210_SET_ENRES0             0x04
35 #define AD2S1210_SET_RES1               0x02
36 #define AD2S1210_SET_RES0               0x01
37
38 #define AD2S1210_SET_ENRESOLUTION       (AD2S1210_SET_ENRES1 |  \
39                                          AD2S1210_SET_ENRES0)
40 #define AD2S1210_SET_RESOLUTION         (AD2S1210_SET_RES1 | AD2S1210_SET_RES0)
41
42 #define AD2S1210_REG_POSITION           0x80
43 #define AD2S1210_REG_VELOCITY           0x82
44 #define AD2S1210_REG_LOS_THRD           0x88
45 #define AD2S1210_REG_DOS_OVR_THRD       0x89
46 #define AD2S1210_REG_DOS_MIS_THRD       0x8A
47 #define AD2S1210_REG_DOS_RST_MAX_THRD   0x8B
48 #define AD2S1210_REG_DOS_RST_MIN_THRD   0x8C
49 #define AD2S1210_REG_LOT_HIGH_THRD      0x8D
50 #define AD2S1210_REG_LOT_LOW_THRD       0x8E
51 #define AD2S1210_REG_EXCIT_FREQ         0x91
52 #define AD2S1210_REG_CONTROL            0x92
53 #define AD2S1210_REG_SOFT_RESET         0xF0
54 #define AD2S1210_REG_FAULT              0xFF
55
56 /* pin SAMPLE, A0, A1, RES0, RES1, is controlled by driver */
57 #define AD2S1210_SAA            3
58 #define AD2S1210_PN             (AD2S1210_SAA + AD2S1210_RES)
59
60 #define AD2S1210_MIN_CLKIN      6144000
61 #define AD2S1210_MAX_CLKIN      10240000
62 #define AD2S1210_MIN_EXCIT      2000
63 #define AD2S1210_MAX_EXCIT      20000
64 #define AD2S1210_MIN_FCW        0x4
65 #define AD2S1210_MAX_FCW        0x50
66
67 /* default input clock on serial interface */
68 #define AD2S1210_DEF_CLKIN      8192000
69 /* clock period in nano second */
70 #define AD2S1210_DEF_TCK        (1000000000 / AD2S1210_DEF_CLKIN)
71 #define AD2S1210_DEF_EXCIT      10000
72
73 enum ad2s1210_mode {
74         MOD_POS = 0,
75         MOD_VEL,
76         MOD_CONFIG,
77         MOD_RESERVED,
78 };
79
80 static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };
81
82 struct ad2s1210_state {
83         const struct ad2s1210_platform_data *pdata;
84         struct mutex lock;
85         struct spi_device *sdev;
86         unsigned int fclkin;
87         unsigned int fexcit;
88         bool hysteresis;
89         bool old_data;
90         u8 resolution;
91         enum ad2s1210_mode mode;
92         u8 rx[2] ____cacheline_aligned;
93         u8 tx[2] ____cacheline_aligned;
94 };
95
96 static const int ad2s1210_mode_vals[4][2] = {
97         [MOD_POS] = { 0, 0 },
98         [MOD_VEL] = { 0, 1 },
99         [MOD_CONFIG] = { 1, 0 },
100 };
101
102 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
103                                      struct ad2s1210_state *st)
104 {
105         gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
106         gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
107         st->mode = mode;
108 }
109
110 /* write 1 bytes (address or data) to the chip */
111 static int ad2s1210_config_write(struct ad2s1210_state *st, u8 data)
112 {
113         int ret;
114
115         ad2s1210_set_mode(MOD_CONFIG, st);
116         st->tx[0] = data;
117         ret = spi_write(st->sdev, st->tx, 1);
118         if (ret < 0)
119                 return ret;
120         st->old_data = true;
121
122         return 0;
123 }
124
125 /* read value from one of the registers */
126 static int ad2s1210_config_read(struct ad2s1210_state *st,
127                                 unsigned char address)
128 {
129         struct spi_transfer xfer = {
130                 .len = 2,
131                 .rx_buf = st->rx,
132                 .tx_buf = st->tx,
133         };
134         int ret = 0;
135
136         ad2s1210_set_mode(MOD_CONFIG, st);
137         st->tx[0] = address | AD2S1210_MSB_IS_HIGH;
138         st->tx[1] = AD2S1210_REG_FAULT;
139         ret = spi_sync_transfer(st->sdev, &xfer, 1);
140         if (ret < 0)
141                 return ret;
142         st->old_data = true;
143
144         return st->rx[1];
145 }
146
147 static inline
148 int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
149 {
150         int ret;
151         unsigned char fcw;
152
153         fcw = (unsigned char)(st->fexcit * (1 << 15) / st->fclkin);
154         if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW) {
155                 dev_err(&st->sdev->dev, "ad2s1210: FCW out of range\n");
156                 return -ERANGE;
157         }
158
159         ret = ad2s1210_config_write(st, AD2S1210_REG_EXCIT_FREQ);
160         if (ret < 0)
161                 return ret;
162
163         return ad2s1210_config_write(st, fcw);
164 }
165
166 static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
167 {
168         return ad2s1210_resolution_value[
169                 (gpio_get_value(st->pdata->res[0]) << 1) |
170                 gpio_get_value(st->pdata->res[1])];
171 }
172
173 static const int ad2s1210_res_pins[4][2] = {
174         { 0, 0 }, {0, 1}, {1, 0}, {1, 1}
175 };
176
177 static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
178 {
179         gpio_set_value(st->pdata->res[0],
180                        ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
181         gpio_set_value(st->pdata->res[1],
182                        ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
183 }
184
185 static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
186 {
187         int ret;
188
189         ret = ad2s1210_config_write(st, AD2S1210_REG_SOFT_RESET);
190         if (ret < 0)
191                 return ret;
192
193         return ad2s1210_config_write(st, 0x0);
194 }
195
196 static ssize_t ad2s1210_show_fclkin(struct device *dev,
197                                     struct device_attribute *attr,
198                                     char *buf)
199 {
200         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
201
202         return sprintf(buf, "%u\n", st->fclkin);
203 }
204
205 static ssize_t ad2s1210_store_fclkin(struct device *dev,
206                                      struct device_attribute *attr,
207                                      const char *buf,
208                                      size_t len)
209 {
210         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
211         unsigned int fclkin;
212         int ret;
213
214         ret = kstrtouint(buf, 10, &fclkin);
215         if (ret)
216                 return ret;
217         if (fclkin < AD2S1210_MIN_CLKIN || fclkin > AD2S1210_MAX_CLKIN) {
218                 dev_err(dev, "ad2s1210: fclkin out of range\n");
219                 return -EINVAL;
220         }
221
222         mutex_lock(&st->lock);
223         st->fclkin = fclkin;
224
225         ret = ad2s1210_update_frequency_control_word(st);
226         if (ret < 0)
227                 goto error_ret;
228         ret = ad2s1210_soft_reset(st);
229 error_ret:
230         mutex_unlock(&st->lock);
231
232         return ret < 0 ? ret : len;
233 }
234
235 static ssize_t ad2s1210_show_fexcit(struct device *dev,
236                                     struct device_attribute *attr,
237                                     char *buf)
238 {
239         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
240
241         return sprintf(buf, "%u\n", st->fexcit);
242 }
243
244 static ssize_t ad2s1210_store_fexcit(struct device *dev,
245                                      struct device_attribute *attr,
246                                      const char *buf, size_t len)
247 {
248         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
249         unsigned int fexcit;
250         int ret;
251
252         ret = kstrtouint(buf, 10, &fexcit);
253         if (ret < 0)
254                 return ret;
255         if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) {
256                 dev_err(dev,
257                         "ad2s1210: excitation frequency out of range\n");
258                 return -EINVAL;
259         }
260         mutex_lock(&st->lock);
261         st->fexcit = fexcit;
262         ret = ad2s1210_update_frequency_control_word(st);
263         if (ret < 0)
264                 goto error_ret;
265         ret = ad2s1210_soft_reset(st);
266 error_ret:
267         mutex_unlock(&st->lock);
268
269         return ret < 0 ? ret : len;
270 }
271
272 static ssize_t ad2s1210_show_control(struct device *dev,
273                                      struct device_attribute *attr,
274                                      char *buf)
275 {
276         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
277         int ret;
278
279         mutex_lock(&st->lock);
280         ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
281         mutex_unlock(&st->lock);
282         return ret < 0 ? ret : sprintf(buf, "0x%x\n", ret);
283 }
284
285 static ssize_t ad2s1210_store_control(struct device *dev,
286                                       struct device_attribute *attr,
287                                       const char *buf, size_t len)
288 {
289         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
290         unsigned char udata;
291         unsigned char data;
292         int ret;
293
294         ret = kstrtou8(buf, 16, &udata);
295         if (ret)
296                 return -EINVAL;
297
298         mutex_lock(&st->lock);
299         ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL);
300         if (ret < 0)
301                 goto error_ret;
302         data = udata & AD2S1210_MSB_IS_LOW;
303         ret = ad2s1210_config_write(st, data);
304         if (ret < 0)
305                 goto error_ret;
306
307         ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
308         if (ret < 0)
309                 goto error_ret;
310         if (ret & AD2S1210_MSB_IS_HIGH) {
311                 ret = -EIO;
312                 dev_err(dev,
313                         "ad2s1210: write control register fail\n");
314                 goto error_ret;
315         }
316         st->resolution
317                 = ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
318         if (st->pdata->gpioin) {
319                 data = ad2s1210_read_resolution_pin(st);
320                 if (data != st->resolution)
321                         dev_warn(dev, "ad2s1210: resolution settings not match\n");
322         } else {
323                 ad2s1210_set_resolution_pin(st);
324         }
325         ret = len;
326         st->hysteresis = !!(data & AD2S1210_ENABLE_HYSTERESIS);
327
328 error_ret:
329         mutex_unlock(&st->lock);
330         return ret;
331 }
332
333 static ssize_t ad2s1210_show_resolution(struct device *dev,
334                                         struct device_attribute *attr,
335                                         char *buf)
336 {
337         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
338
339         return sprintf(buf, "%d\n", st->resolution);
340 }
341
342 static ssize_t ad2s1210_store_resolution(struct device *dev,
343                                          struct device_attribute *attr,
344                                          const char *buf, size_t len)
345 {
346         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
347         unsigned char data;
348         unsigned char udata;
349         int ret;
350
351         ret = kstrtou8(buf, 10, &udata);
352         if (ret || udata < 10 || udata > 16) {
353                 dev_err(dev, "ad2s1210: resolution out of range\n");
354                 return -EINVAL;
355         }
356         mutex_lock(&st->lock);
357         ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
358         if (ret < 0)
359                 goto error_ret;
360         data = ret;
361         data &= ~AD2S1210_SET_RESOLUTION;
362         data |= (udata - 10) >> 1;
363         ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL);
364         if (ret < 0)
365                 goto error_ret;
366         ret = ad2s1210_config_write(st, data & AD2S1210_MSB_IS_LOW);
367         if (ret < 0)
368                 goto error_ret;
369         ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
370         if (ret < 0)
371                 goto error_ret;
372         data = ret;
373         if (data & AD2S1210_MSB_IS_HIGH) {
374                 ret = -EIO;
375                 dev_err(dev, "ad2s1210: setting resolution fail\n");
376                 goto error_ret;
377         }
378         st->resolution
379                 = ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
380         if (st->pdata->gpioin) {
381                 data = ad2s1210_read_resolution_pin(st);
382                 if (data != st->resolution)
383                         dev_warn(dev, "ad2s1210: resolution settings not match\n");
384         } else {
385                 ad2s1210_set_resolution_pin(st);
386         }
387         ret = len;
388 error_ret:
389         mutex_unlock(&st->lock);
390         return ret;
391 }
392
393 /* read the fault register since last sample */
394 static ssize_t ad2s1210_show_fault(struct device *dev,
395                                    struct device_attribute *attr, char *buf)
396 {
397         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
398         int ret;
399
400         mutex_lock(&st->lock);
401         ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
402         mutex_unlock(&st->lock);
403
404         return ret ? ret : sprintf(buf, "0x%x\n", ret);
405 }
406
407 static ssize_t ad2s1210_clear_fault(struct device *dev,
408                                     struct device_attribute *attr,
409                                     const char *buf,
410                                     size_t len)
411 {
412         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
413         int ret;
414
415         mutex_lock(&st->lock);
416         gpio_set_value(st->pdata->sample, 0);
417         /* delay (2 * tck + 20) nano seconds */
418         udelay(1);
419         gpio_set_value(st->pdata->sample, 1);
420         ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
421         if (ret < 0)
422                 goto error_ret;
423         gpio_set_value(st->pdata->sample, 0);
424         gpio_set_value(st->pdata->sample, 1);
425 error_ret:
426         mutex_unlock(&st->lock);
427
428         return ret < 0 ? ret : len;
429 }
430
431 static ssize_t ad2s1210_show_reg(struct device *dev,
432                                  struct device_attribute *attr,
433                                  char *buf)
434 {
435         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
436         struct iio_dev_attr *iattr = to_iio_dev_attr(attr);
437         int ret;
438
439         mutex_lock(&st->lock);
440         ret = ad2s1210_config_read(st, iattr->address);
441         mutex_unlock(&st->lock);
442
443         return ret < 0 ? ret : sprintf(buf, "%d\n", ret);
444 }
445
446 static ssize_t ad2s1210_store_reg(struct device *dev,
447                                   struct device_attribute *attr,
448                                   const char *buf, size_t len)
449 {
450         struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
451         unsigned char data;
452         int ret;
453         struct iio_dev_attr *iattr = to_iio_dev_attr(attr);
454
455         ret = kstrtou8(buf, 10, &data);
456         if (ret)
457                 return -EINVAL;
458         mutex_lock(&st->lock);
459         ret = ad2s1210_config_write(st, iattr->address);
460         if (ret < 0)
461                 goto error_ret;
462         ret = ad2s1210_config_write(st, data & AD2S1210_MSB_IS_LOW);
463 error_ret:
464         mutex_unlock(&st->lock);
465         return ret < 0 ? ret : len;
466 }
467
468 static int ad2s1210_read_raw(struct iio_dev *indio_dev,
469                              struct iio_chan_spec const *chan,
470                              int *val,
471                              int *val2,
472                              long m)
473 {
474         struct ad2s1210_state *st = iio_priv(indio_dev);
475         u16 negative;
476         int ret = 0;
477         u16 pos;
478         s16 vel;
479
480         mutex_lock(&st->lock);
481         gpio_set_value(st->pdata->sample, 0);
482         /* delay (6 * tck + 20) nano seconds */
483         udelay(1);
484
485         switch (chan->type) {
486         case IIO_ANGL:
487                 ad2s1210_set_mode(MOD_POS, st);
488                 break;
489         case IIO_ANGL_VEL:
490                 ad2s1210_set_mode(MOD_VEL, st);
491                 break;
492         default:
493                 ret = -EINVAL;
494                 break;
495         }
496         if (ret < 0)
497                 goto error_ret;
498         ret = spi_read(st->sdev, st->rx, 2);
499         if (ret < 0)
500                 goto error_ret;
501
502         switch (chan->type) {
503         case IIO_ANGL:
504                 pos = be16_to_cpup((__be16 *)st->rx);
505                 if (st->hysteresis)
506                         pos >>= 16 - st->resolution;
507                 *val = pos;
508                 ret = IIO_VAL_INT;
509                 break;
510         case IIO_ANGL_VEL:
511                 negative = st->rx[0] & 0x80;
512                 vel = be16_to_cpup((__be16 *)st->rx);
513                 vel >>= 16 - st->resolution;
514                 if (vel & 0x8000) {
515                         negative = (0xffff >> st->resolution) << st->resolution;
516                         vel |= negative;
517                 }
518                 *val = vel;
519                 ret = IIO_VAL_INT;
520                 break;
521         default:
522                 mutex_unlock(&st->lock);
523                 return -EINVAL;
524         }
525
526 error_ret:
527         gpio_set_value(st->pdata->sample, 1);
528         /* delay (2 * tck + 20) nano seconds */
529         udelay(1);
530         mutex_unlock(&st->lock);
531         return ret;
532 }
533
534 static IIO_DEVICE_ATTR(fclkin, 0644,
535                        ad2s1210_show_fclkin, ad2s1210_store_fclkin, 0);
536 static IIO_DEVICE_ATTR(fexcit, 0644,
537                        ad2s1210_show_fexcit,    ad2s1210_store_fexcit, 0);
538 static IIO_DEVICE_ATTR(control, 0644,
539                        ad2s1210_show_control, ad2s1210_store_control, 0);
540 static IIO_DEVICE_ATTR(bits, 0644,
541                        ad2s1210_show_resolution, ad2s1210_store_resolution, 0);
542 static IIO_DEVICE_ATTR(fault, 0644,
543                        ad2s1210_show_fault, ad2s1210_clear_fault, 0);
544
545 static IIO_DEVICE_ATTR(los_thrd, 0644,
546                        ad2s1210_show_reg, ad2s1210_store_reg,
547                        AD2S1210_REG_LOS_THRD);
548 static IIO_DEVICE_ATTR(dos_ovr_thrd, 0644,
549                        ad2s1210_show_reg, ad2s1210_store_reg,
550                        AD2S1210_REG_DOS_OVR_THRD);
551 static IIO_DEVICE_ATTR(dos_mis_thrd, 0644,
552                        ad2s1210_show_reg, ad2s1210_store_reg,
553                        AD2S1210_REG_DOS_MIS_THRD);
554 static IIO_DEVICE_ATTR(dos_rst_max_thrd, 0644,
555                        ad2s1210_show_reg, ad2s1210_store_reg,
556                        AD2S1210_REG_DOS_RST_MAX_THRD);
557 static IIO_DEVICE_ATTR(dos_rst_min_thrd, 0644,
558                        ad2s1210_show_reg, ad2s1210_store_reg,
559                        AD2S1210_REG_DOS_RST_MIN_THRD);
560 static IIO_DEVICE_ATTR(lot_high_thrd, 0644,
561                        ad2s1210_show_reg, ad2s1210_store_reg,
562                        AD2S1210_REG_LOT_HIGH_THRD);
563 static IIO_DEVICE_ATTR(lot_low_thrd, 0644,
564                        ad2s1210_show_reg, ad2s1210_store_reg,
565                        AD2S1210_REG_LOT_LOW_THRD);
566
567 static const struct iio_chan_spec ad2s1210_channels[] = {
568         {
569                 .type = IIO_ANGL,
570                 .indexed = 1,
571                 .channel = 0,
572                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
573         }, {
574                 .type = IIO_ANGL_VEL,
575                 .indexed = 1,
576                 .channel = 0,
577                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
578         }
579 };
580
581 static struct attribute *ad2s1210_attributes[] = {
582         &iio_dev_attr_fclkin.dev_attr.attr,
583         &iio_dev_attr_fexcit.dev_attr.attr,
584         &iio_dev_attr_control.dev_attr.attr,
585         &iio_dev_attr_bits.dev_attr.attr,
586         &iio_dev_attr_fault.dev_attr.attr,
587         &iio_dev_attr_los_thrd.dev_attr.attr,
588         &iio_dev_attr_dos_ovr_thrd.dev_attr.attr,
589         &iio_dev_attr_dos_mis_thrd.dev_attr.attr,
590         &iio_dev_attr_dos_rst_max_thrd.dev_attr.attr,
591         &iio_dev_attr_dos_rst_min_thrd.dev_attr.attr,
592         &iio_dev_attr_lot_high_thrd.dev_attr.attr,
593         &iio_dev_attr_lot_low_thrd.dev_attr.attr,
594         NULL,
595 };
596
597 static const struct attribute_group ad2s1210_attribute_group = {
598         .attrs = ad2s1210_attributes,
599 };
600
601 static int ad2s1210_initial(struct ad2s1210_state *st)
602 {
603         unsigned char data;
604         int ret;
605
606         mutex_lock(&st->lock);
607         if (st->pdata->gpioin)
608                 st->resolution = ad2s1210_read_resolution_pin(st);
609         else
610                 ad2s1210_set_resolution_pin(st);
611
612         ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL);
613         if (ret < 0)
614                 goto error_ret;
615         data = AD2S1210_DEF_CONTROL & ~(AD2S1210_SET_RESOLUTION);
616         data |= (st->resolution - 10) >> 1;
617         ret = ad2s1210_config_write(st, data);
618         if (ret < 0)
619                 goto error_ret;
620         ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
621         if (ret < 0)
622                 goto error_ret;
623
624         if (ret & AD2S1210_MSB_IS_HIGH) {
625                 ret = -EIO;
626                 goto error_ret;
627         }
628
629         ret = ad2s1210_update_frequency_control_word(st);
630         if (ret < 0)
631                 goto error_ret;
632         ret = ad2s1210_soft_reset(st);
633 error_ret:
634         mutex_unlock(&st->lock);
635         return ret;
636 }
637
638 static const struct iio_info ad2s1210_info = {
639         .read_raw = ad2s1210_read_raw,
640         .attrs = &ad2s1210_attribute_group,
641         .driver_module = THIS_MODULE,
642 };
643
644 static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
645 {
646         unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
647         struct gpio ad2s1210_gpios[] = {
648                 { st->pdata->sample, GPIOF_DIR_IN, "sample" },
649                 { st->pdata->a[0], flags, "a0" },
650                 { st->pdata->a[1], flags, "a1" },
651                 { st->pdata->res[0], flags, "res0" },
652                 { st->pdata->res[0], flags, "res1" },
653         };
654
655         return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
656 }
657
658 static void ad2s1210_free_gpios(struct ad2s1210_state *st)
659 {
660         unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
661         struct gpio ad2s1210_gpios[] = {
662                 { st->pdata->sample, GPIOF_DIR_IN, "sample" },
663                 { st->pdata->a[0], flags, "a0" },
664                 { st->pdata->a[1], flags, "a1" },
665                 { st->pdata->res[0], flags, "res0" },
666                 { st->pdata->res[0], flags, "res1" },
667         };
668
669         gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
670 }
671
672 static int ad2s1210_probe(struct spi_device *spi)
673 {
674         struct iio_dev *indio_dev;
675         struct ad2s1210_state *st;
676         int ret;
677
678         if (!spi->dev.platform_data)
679                 return -EINVAL;
680
681         indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
682         if (!indio_dev)
683                 return -ENOMEM;
684         st = iio_priv(indio_dev);
685         st->pdata = spi->dev.platform_data;
686         ret = ad2s1210_setup_gpios(st);
687         if (ret < 0)
688                 return ret;
689
690         spi_set_drvdata(spi, indio_dev);
691
692         mutex_init(&st->lock);
693         st->sdev = spi;
694         st->hysteresis = true;
695         st->mode = MOD_CONFIG;
696         st->resolution = 12;
697         st->fexcit = AD2S1210_DEF_EXCIT;
698
699         indio_dev->dev.parent = &spi->dev;
700         indio_dev->info = &ad2s1210_info;
701         indio_dev->modes = INDIO_DIRECT_MODE;
702         indio_dev->channels = ad2s1210_channels;
703         indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels);
704         indio_dev->name = spi_get_device_id(spi)->name;
705
706         ret = iio_device_register(indio_dev);
707         if (ret)
708                 goto error_free_gpios;
709
710         st->fclkin = spi->max_speed_hz;
711         spi->mode = SPI_MODE_3;
712         spi_setup(spi);
713         ad2s1210_initial(st);
714
715         return 0;
716
717 error_free_gpios:
718         ad2s1210_free_gpios(st);
719         return ret;
720 }
721
722 static int ad2s1210_remove(struct spi_device *spi)
723 {
724         struct iio_dev *indio_dev = spi_get_drvdata(spi);
725
726         iio_device_unregister(indio_dev);
727         ad2s1210_free_gpios(iio_priv(indio_dev));
728
729         return 0;
730 }
731
732 static const struct spi_device_id ad2s1210_id[] = {
733         { "ad2s1210" },
734         {}
735 };
736 MODULE_DEVICE_TABLE(spi, ad2s1210_id);
737
738 static struct spi_driver ad2s1210_driver = {
739         .driver = {
740                 .name = DRV_NAME,
741         },
742         .probe = ad2s1210_probe,
743         .remove = ad2s1210_remove,
744         .id_table = ad2s1210_id,
745 };
746 module_spi_driver(ad2s1210_driver);
747
748 MODULE_AUTHOR("Graff Yang <graff.yang@gmail.com>");
749 MODULE_DESCRIPTION("Analog Devices AD2S1210 Resolver to Digital SPI driver");
750 MODULE_LICENSE("GPL v2");