drivers/spi/spi-pxa2xx.c

   1 /*
   2  * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
   3  * Copyright (C) 2013, Intel Corporation
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #include <linux/bitops.h>
  17 #include <linux/init.h>
  18 #include <linux/module.h>
  19 #include <linux/device.h>
  20 #include <linux/ioport.h>
  21 #include <linux/errno.h>
  22 #include <linux/err.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/kernel.h>
  25 #include <linux/pci.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/spi/pxa2xx_spi.h>
  28 #include <linux/spi/spi.h>
  29 #include <linux/delay.h>
  30 #include <linux/gpio.h>
  31 #include <linux/gpio/consumer.h>
  32 #include <linux/slab.h>
  33 #include <linux/clk.h>
  34 #include <linux/pm_runtime.h>
  35 #include <linux/acpi.h>
  36 #include <linux/of_device.h>
  37
  38 #include "spi-pxa2xx.h"
  39
  40 MODULE_AUTHOR("Stephen Street");
  41 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
  42 MODULE_LICENSE("GPL");
  43 MODULE_ALIAS("platform:pxa2xx-spi");
  44
  45 #define TIMOUT_DFLT             1000
  46
  47 /*
  48  * for testing SSCR1 changes that require SSP restart, basically
  49  * everything except the service and interrupt enables, the pxa270 developer
  50  * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
  51  * list, but the PXA255 dev man says all bits without really meaning the
  52  * service and interrupt enables
  53  */
  54 #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
  55                                 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
  56                                 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
  57                                 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
  58                                 | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
  59                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
  60
  61 #define QUARK_X1000_SSCR1_CHANGE_MASK (QUARK_X1000_SSCR1_STRF   \
  62                                 | QUARK_X1000_SSCR1_EFWR        \
  63                                 | QUARK_X1000_SSCR1_RFT         \
  64                                 | QUARK_X1000_SSCR1_TFT         \
  65                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
  66
  67 #define CE4100_SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
  68                                 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
  69                                 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
  70                                 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
  71                                 | CE4100_SSCR1_RFT | CE4100_SSCR1_TFT | SSCR1_MWDS \
  72                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
  73
  74 #define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE   BIT(24)
  75 #define LPSS_CS_CONTROL_SW_MODE                 BIT(0)
  76 #define LPSS_CS_CONTROL_CS_HIGH                 BIT(1)
  77 #define LPSS_CAPS_CS_EN_SHIFT                   9
  78 #define LPSS_CAPS_CS_EN_MASK                    (0xf << LPSS_CAPS_CS_EN_SHIFT)
  79
  80 struct lpss_config {
  81         /* LPSS offset from drv_data->ioaddr */
  82         unsigned offset;
  83         /* Register offsets from drv_data->lpss_base or -1 */
  84         int reg_general;
  85         int reg_ssp;
  86         int reg_cs_ctrl;
  87         int reg_capabilities;
  88         /* FIFO thresholds */
  89         u32 rx_threshold;
  90         u32 tx_threshold_lo;
  91         u32 tx_threshold_hi;
  92         /* Chip select control */
  93         unsigned cs_sel_shift;
  94         unsigned cs_sel_mask;
  95         unsigned cs_num;
  96 };
  97
  98 /* Keep these sorted with enum pxa_ssp_type */
  99 static const struct lpss_config lpss_platforms[] = {
 100         {       /* LPSS_LPT_SSP */
 101                 .offset = 0x800,
 102                 .reg_general = 0x08,
 103                 .reg_ssp = 0x0c,
 104                 .reg_cs_ctrl = 0x18,
 105                 .reg_capabilities = -1,
 106                 .rx_threshold = 64,
 107                 .tx_threshold_lo = 160,
 108                 .tx_threshold_hi = 224,
 109         },
 110         {       /* LPSS_BYT_SSP */
 111                 .offset = 0x400,
 112                 .reg_general = 0x08,
 113                 .reg_ssp = 0x0c,
 114                 .reg_cs_ctrl = 0x18,
 115                 .reg_capabilities = -1,
 116                 .rx_threshold = 64,
 117                 .tx_threshold_lo = 160,
 118                 .tx_threshold_hi = 224,
 119         },
 120         {       /* LPSS_BSW_SSP */
 121                 .offset = 0x400,
 122                 .reg_general = 0x08,
 123                 .reg_ssp = 0x0c,
 124                 .reg_cs_ctrl = 0x18,
 125                 .reg_capabilities = -1,
 126                 .rx_threshold = 64,
 127                 .tx_threshold_lo = 160,
 128                 .tx_threshold_hi = 224,
 129                 .cs_sel_shift = 2,
 130                 .cs_sel_mask = 1 << 2,
 131                 .cs_num = 2,
 132         },
 133         {       /* LPSS_SPT_SSP */
 134                 .offset = 0x200,
 135                 .reg_general = -1,
 136                 .reg_ssp = 0x20,
 137                 .reg_cs_ctrl = 0x24,
 138                 .reg_capabilities = -1,
 139                 .rx_threshold = 1,
 140                 .tx_threshold_lo = 32,
 141                 .tx_threshold_hi = 56,
 142         },
 143         {       /* LPSS_BXT_SSP */
 144                 .offset = 0x200,
 145                 .reg_general = -1,
 146                 .reg_ssp = 0x20,
 147                 .reg_cs_ctrl = 0x24,
 148                 .reg_capabilities = 0xfc,
 149                 .rx_threshold = 1,
 150                 .tx_threshold_lo = 16,
 151                 .tx_threshold_hi = 48,
 152                 .cs_sel_shift = 8,
 153                 .cs_sel_mask = 3 << 8,
 154         },
 155         {       /* LPSS_CNL_SSP */
 156                 .offset = 0x200,
 157                 .reg_general = -1,
 158                 .reg_ssp = 0x20,
 159                 .reg_cs_ctrl = 0x24,
 160                 .reg_capabilities = 0xfc,
 161                 .rx_threshold = 1,
 162                 .tx_threshold_lo = 32,
 163                 .tx_threshold_hi = 56,
 164                 .cs_sel_shift = 8,
 165                 .cs_sel_mask = 3 << 8,
 166         },
 167 };
 168
 169 static inline const struct lpss_config
 170 *lpss_get_config(const struct driver_data *drv_data)
 171 {
 172         return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
 173 }
 174
 175 static bool is_lpss_ssp(const struct driver_data *drv_data)
 176 {
 177         switch (drv_data->ssp_type) {
 178         case LPSS_LPT_SSP:
 179         case LPSS_BYT_SSP:
 180         case LPSS_BSW_SSP:
 181         case LPSS_SPT_SSP:
 182         case LPSS_BXT_SSP:
 183         case LPSS_CNL_SSP:
 184                 return true;
 185         default:
 186                 return false;
 187         }
 188 }
 189
 190 static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
 191 {
 192         return drv_data->ssp_type == QUARK_X1000_SSP;
 193 }
 194
 195 static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data)
 196 {
 197         switch (drv_data->ssp_type) {
 198         case QUARK_X1000_SSP:
 199                 return QUARK_X1000_SSCR1_CHANGE_MASK;
 200         case CE4100_SSP:
 201                 return CE4100_SSCR1_CHANGE_MASK;
 202         default:
 203                 return SSCR1_CHANGE_MASK;
 204         }
 205 }
 206
 207 static u32
 208 pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data)
 209 {
 210         switch (drv_data->ssp_type) {
 211         case QUARK_X1000_SSP:
 212                 return RX_THRESH_QUARK_X1000_DFLT;
 213         case CE4100_SSP:
 214                 return RX_THRESH_CE4100_DFLT;
 215         default:
 216                 return RX_THRESH_DFLT;
 217         }
 218 }
 219
 220 static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data)
 221 {
 222         u32 mask;
 223
 224         switch (drv_data->ssp_type) {
 225         case QUARK_X1000_SSP:
 226                 mask = QUARK_X1000_SSSR_TFL_MASK;
 227                 break;
 228         case CE4100_SSP:
 229                 mask = CE4100_SSSR_TFL_MASK;
 230                 break;
 231         default:
 232                 mask = SSSR_TFL_MASK;
 233                 break;
 234         }
 235
 236         return (pxa2xx_spi_read(drv_data, SSSR) & mask) == mask;
 237 }
 238
 239 static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data,
 240                                      u32 *sccr1_reg)
 241 {
 242         u32 mask;
 243
 244         switch (drv_data->ssp_type) {
 245         case QUARK_X1000_SSP:
 246                 mask = QUARK_X1000_SSCR1_RFT;
 247                 break;
 248         case CE4100_SSP:
 249                 mask = CE4100_SSCR1_RFT;
 250                 break;
 251         default:
 252                 mask = SSCR1_RFT;
 253                 break;
 254         }
 255         *sccr1_reg &= ~mask;
 256 }
 257
 258 static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data,
 259                                    u32 *sccr1_reg, u32 threshold)
 260 {
 261         switch (drv_data->ssp_type) {
 262         case QUARK_X1000_SSP:
 263                 *sccr1_reg |= QUARK_X1000_SSCR1_RxTresh(threshold);
 264                 break;
 265         case CE4100_SSP:
 266                 *sccr1_reg |= CE4100_SSCR1_RxTresh(threshold);
 267                 break;
 268         default:
 269                 *sccr1_reg |= SSCR1_RxTresh(threshold);
 270                 break;
 271         }
 272 }
 273
 274 static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data,
 275                                   u32 clk_div, u8 bits)
 276 {
 277         switch (drv_data->ssp_type) {
 278         case QUARK_X1000_SSP:
 279                 return clk_div
 280                         | QUARK_X1000_SSCR0_Motorola
 281                         | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits)
 282                         | SSCR0_SSE;
 283         default:
 284                 return clk_div
 285                         | SSCR0_Motorola
 286                         | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
 287                         | SSCR0_SSE
 288                         | (bits > 16 ? SSCR0_EDSS : 0);
 289         }
 290 }
 291
 292 /*
 293  * Read and write LPSS SSP private registers. Caller must first check that
 294  * is_lpss_ssp() returns true before these can be called.
 295  */
 296 static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset)
 297 {
 298         WARN_ON(!drv_data->lpss_base);
 299         return readl(drv_data->lpss_base + offset);
 300 }
 301
 302 static void __lpss_ssp_write_priv(struct driver_data *drv_data,
 303                                   unsigned offset, u32 value)
 304 {
 305         WARN_ON(!drv_data->lpss_base);
 306         writel(value, drv_data->lpss_base + offset);
 307 }
 308
 309 /*
 310  * lpss_ssp_setup - perform LPSS SSP specific setup
 311  * @drv_data: pointer to the driver private data
 312  *
 313  * Perform LPSS SSP specific setup. This function must be called first if
 314  * one is going to use LPSS SSP private registers.
 315  */
 316 static void lpss_ssp_setup(struct driver_data *drv_data)
 317 {
 318         const struct lpss_config *config;
 319         u32 value;
 320
 321         config = lpss_get_config(drv_data);
 322         drv_data->lpss_base = drv_data->ioaddr + config->offset;
 323
 324         /* Enable software chip select control */
 325         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 326         value &= ~(LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH);
 327         value |= LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH;
 328         __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 329
 330         /* Enable multiblock DMA transfers */
 331         if (drv_data->master_info->enable_dma) {
 332                 __lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
 333
 334                 if (config->reg_general >= 0) {
 335                         value = __lpss_ssp_read_priv(drv_data,
 336                                                      config->reg_general);
 337                         value |= LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE;
 338                         __lpss_ssp_write_priv(drv_data,
 339                                               config->reg_general, value);
 340                 }
 341         }
 342 }
 343
 344 static void lpss_ssp_select_cs(struct spi_device *spi,
 345                                const struct lpss_config *config)
 346 {
 347         struct driver_data *drv_data =
 348                 spi_controller_get_devdata(spi->controller);
 349         u32 value, cs;
 350
 351         if (!config->cs_sel_mask)
 352                 return;
 353
 354         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 355
 356         cs = spi->chip_select;
 357         cs <<= config->cs_sel_shift;
 358         if (cs != (value & config->cs_sel_mask)) {
 359                 /*
 360                  * When switching another chip select output active the
 361                  * output must be selected first and wait 2 ssp_clk cycles
 362                  * before changing state to active. Otherwise a short
 363                  * glitch will occur on the previous chip select since
 364                  * output select is latched but state control is not.
 365                  */
 366                 value &= ~config->cs_sel_mask;
 367                 value |= cs;
 368                 __lpss_ssp_write_priv(drv_data,
 369                                       config->reg_cs_ctrl, value);
 370                 ndelay(1000000000 /
 371                        (drv_data->master->max_speed_hz / 2));
 372         }
 373 }
 374
 375 static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
 376 {
 377         struct driver_data *drv_data =
 378                 spi_controller_get_devdata(spi->controller);
 379         const struct lpss_config *config;
 380         u32 value;
 381
 382         config = lpss_get_config(drv_data);
 383
 384         if (enable)
 385                 lpss_ssp_select_cs(spi, config);
 386
 387         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 388         if (enable)
 389                 value &= ~LPSS_CS_CONTROL_CS_HIGH;
 390         else
 391                 value |= LPSS_CS_CONTROL_CS_HIGH;
 392         __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 393 }
 394
 395 static void cs_assert(struct spi_device *spi)
 396 {
 397         struct chip_data *chip = spi_get_ctldata(spi);
 398         struct driver_data *drv_data =
 399                 spi_controller_get_devdata(spi->controller);
 400
 401         if (drv_data->ssp_type == CE4100_SSP) {
 402                 pxa2xx_spi_write(drv_data, SSSR, chip->frm);
 403                 return;
 404         }
 405
 406         if (chip->cs_control) {
 407                 chip->cs_control(PXA2XX_CS_ASSERT);
 408                 return;
 409         }
 410
 411         if (chip->gpiod_cs) {
 412                 gpiod_set_value(chip->gpiod_cs, chip->gpio_cs_inverted);
 413                 return;
 414         }
 415
 416         if (is_lpss_ssp(drv_data))
 417                 lpss_ssp_cs_control(spi, true);
 418 }
 419
 420 static void cs_deassert(struct spi_device *spi)
 421 {
 422         struct chip_data *chip = spi_get_ctldata(spi);
 423         struct driver_data *drv_data =
 424                 spi_controller_get_devdata(spi->controller);
 425         unsigned long timeout;
 426
 427         if (drv_data->ssp_type == CE4100_SSP)
 428                 return;
 429
 430         /* Wait until SSP becomes idle before deasserting the CS */
 431         timeout = jiffies + msecs_to_jiffies(10);
 432         while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY &&
 433                !time_after(jiffies, timeout))
 434                 cpu_relax();
 435
 436         if (chip->cs_control) {
 437                 chip->cs_control(PXA2XX_CS_DEASSERT);
 438                 return;
 439         }
 440
 441         if (chip->gpiod_cs) {
 442                 gpiod_set_value(chip->gpiod_cs, !chip->gpio_cs_inverted);
 443                 return;
 444         }
 445
 446         if (is_lpss_ssp(drv_data))
 447                 lpss_ssp_cs_control(spi, false);
 448 }
 449
 450 static void pxa2xx_spi_set_cs(struct spi_device *spi, bool level)
 451 {
 452         if (level)
 453                 cs_deassert(spi);
 454         else
 455                 cs_assert(spi);
 456 }
 457
 458 int pxa2xx_spi_flush(struct driver_data *drv_data)
 459 {
 460         unsigned long limit = loops_per_jiffy << 1;
 461
 462         do {
 463                 while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
 464                         pxa2xx_spi_read(drv_data, SSDR);
 465         } while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit);
 466         write_SSSR_CS(drv_data, SSSR_ROR);
 467
 468         return limit;
 469 }
 470
 471 static int null_writer(struct driver_data *drv_data)
 472 {
 473         u8 n_bytes = drv_data->n_bytes;
 474
 475         if (pxa2xx_spi_txfifo_full(drv_data)
 476                 || (drv_data->tx == drv_data->tx_end))
 477                 return 0;
 478
 479         pxa2xx_spi_write(drv_data, SSDR, 0);
 480         drv_data->tx += n_bytes;
 481
 482         return 1;
 483 }
 484
 485 static int null_reader(struct driver_data *drv_data)
 486 {
 487         u8 n_bytes = drv_data->n_bytes;
 488
 489         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
 490                && (drv_data->rx < drv_data->rx_end)) {
 491                 pxa2xx_spi_read(drv_data, SSDR);
 492                 drv_data->rx += n_bytes;
 493         }
 494
 495         return drv_data->rx == drv_data->rx_end;
 496 }
 497
 498 static int u8_writer(struct driver_data *drv_data)
 499 {
 500         if (pxa2xx_spi_txfifo_full(drv_data)
 501                 || (drv_data->tx == drv_data->tx_end))
 502                 return 0;
 503
 504         pxa2xx_spi_write(drv_data, SSDR, *(u8 *)(drv_data->tx));
 505         ++drv_data->tx;
 506
 507         return 1;
 508 }
 509
 510 static int u8_reader(struct driver_data *drv_data)
 511 {
 512         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
 513                && (drv_data->rx < drv_data->rx_end)) {
 514                 *(u8 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
 515                 ++drv_data->rx;
 516         }
 517
 518         return drv_data->rx == drv_data->rx_end;
 519 }
 520
 521 static int u16_writer(struct driver_data *drv_data)
 522 {
 523         if (pxa2xx_spi_txfifo_full(drv_data)
 524                 || (drv_data->tx == drv_data->tx_end))
 525                 return 0;
 526
 527         pxa2xx_spi_write(drv_data, SSDR, *(u16 *)(drv_data->tx));
 528         drv_data->tx += 2;
 529
 530         return 1;
 531 }
 532
 533 static int u16_reader(struct driver_data *drv_data)
 534 {
 535         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
 536                && (drv_data->rx < drv_data->rx_end)) {
 537                 *(u16 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
 538                 drv_data->rx += 2;
 539         }
 540
 541         return drv_data->rx == drv_data->rx_end;
 542 }
 543
 544 static int u32_writer(struct driver_data *drv_data)
 545 {
 546         if (pxa2xx_spi_txfifo_full(drv_data)
 547                 || (drv_data->tx == drv_data->tx_end))
 548                 return 0;
 549
 550         pxa2xx_spi_write(drv_data, SSDR, *(u32 *)(drv_data->tx));
 551         drv_data->tx += 4;
 552
 553         return 1;
 554 }
 555
 556 static int u32_reader(struct driver_data *drv_data)
 557 {
 558         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
 559                && (drv_data->rx < drv_data->rx_end)) {
 560                 *(u32 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
 561                 drv_data->rx += 4;
 562         }
 563
 564         return drv_data->rx == drv_data->rx_end;
 565 }
 566
 567 static void reset_sccr1(struct driver_data *drv_data)
 568 {
 569         struct chip_data *chip =
 570                 spi_get_ctldata(drv_data->master->cur_msg->spi);
 571         u32 sccr1_reg;
 572
 573         sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
 574         switch (drv_data->ssp_type) {
 575         case QUARK_X1000_SSP:
 576                 sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
 577                 break;
 578         case CE4100_SSP:
 579                 sccr1_reg &= ~CE4100_SSCR1_RFT;
 580                 break;
 581         default:
 582                 sccr1_reg &= ~SSCR1_RFT;
 583                 break;
 584         }
 585         sccr1_reg |= chip->threshold;
 586         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
 587 }
 588
 589 static void int_error_stop(struct driver_data *drv_data, const char* msg)
 590 {
 591         /* Stop and reset SSP */
 592         write_SSSR_CS(drv_data, drv_data->clear_sr);
 593         reset_sccr1(drv_data);
 594         if (!pxa25x_ssp_comp(drv_data))
 595                 pxa2xx_spi_write(drv_data, SSTO, 0);
 596         pxa2xx_spi_flush(drv_data);
 597         pxa2xx_spi_write(drv_data, SSCR0,
 598                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
 599
 600         dev_err(&drv_data->pdev->dev, "%s\n", msg);
 601
 602         drv_data->master->cur_msg->status = -EIO;
 603         spi_finalize_current_transfer(drv_data->master);
 604 }
 605
 606 static void int_transfer_complete(struct driver_data *drv_data)
 607 {
 608         /* Clear and disable interrupts */
 609         write_SSSR_CS(drv_data, drv_data->clear_sr);
 610         reset_sccr1(drv_data);
 611         if (!pxa25x_ssp_comp(drv_data))
 612                 pxa2xx_spi_write(drv_data, SSTO, 0);
 613
 614         spi_finalize_current_transfer(drv_data->master);
 615 }
 616
 617 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 618 {
 619         u32 irq_mask = (pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE) ?
 620                        drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
 621
 622         u32 irq_status = pxa2xx_spi_read(drv_data, SSSR) & irq_mask;
 623
 624         if (irq_status & SSSR_ROR) {
 625                 int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
 626                 return IRQ_HANDLED;
 627         }
 628
 629         if (irq_status & SSSR_TUR) {
 630                 int_error_stop(drv_data, "interrupt_transfer: fifo underrun");
 631                 return IRQ_HANDLED;
 632         }
 633
 634         if (irq_status & SSSR_TINT) {
 635                 pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
 636                 if (drv_data->read(drv_data)) {
 637                         int_transfer_complete(drv_data);
 638                         return IRQ_HANDLED;
 639                 }
 640         }
 641
 642         /* Drain rx fifo, Fill tx fifo and prevent overruns */
 643         do {
 644                 if (drv_data->read(drv_data)) {
 645                         int_transfer_complete(drv_data);
 646                         return IRQ_HANDLED;
 647                 }
 648         } while (drv_data->write(drv_data));
 649
 650         if (drv_data->read(drv_data)) {
 651                 int_transfer_complete(drv_data);
 652                 return IRQ_HANDLED;
 653         }
 654
 655         if (drv_data->tx == drv_data->tx_end) {
 656                 u32 bytes_left;
 657                 u32 sccr1_reg;
 658
 659                 sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
 660                 sccr1_reg &= ~SSCR1_TIE;
 661
 662                 /*
 663                  * PXA25x_SSP has no timeout, set up rx threshould for the
 664                  * remaining RX bytes.
 665                  */
 666                 if (pxa25x_ssp_comp(drv_data)) {
 667                         u32 rx_thre;
 668
 669                         pxa2xx_spi_clear_rx_thre(drv_data, &sccr1_reg);
 670
 671                         bytes_left = drv_data->rx_end - drv_data->rx;
 672                         switch (drv_data->n_bytes) {
 673                         case 4:
 674                                 bytes_left >>= 2;
 675                                 break;
 676                         case 2:
 677                                 bytes_left >>= 1;
 678                                 break;
 679                         }
 680
 681                         rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data);
 682                         if (rx_thre > bytes_left)
 683                                 rx_thre = bytes_left;
 684
 685                         pxa2xx_spi_set_rx_thre(drv_data, &sccr1_reg, rx_thre);
 686                 }
 687                 pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
 688         }
 689
 690         /* We did something */
 691         return IRQ_HANDLED;
 692 }
 693
 694 static void handle_bad_msg(struct driver_data *drv_data)
 695 {
 696         pxa2xx_spi_write(drv_data, SSCR0,
 697                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
 698         pxa2xx_spi_write(drv_data, SSCR1,
 699                          pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
 700         if (!pxa25x_ssp_comp(drv_data))
 701                 pxa2xx_spi_write(drv_data, SSTO, 0);
 702         write_SSSR_CS(drv_data, drv_data->clear_sr);
 703
 704         dev_err(&drv_data->pdev->dev,
 705                 "bad message state in interrupt handler\n");
 706 }
 707
 708 static irqreturn_t ssp_int(int irq, void *dev_id)
 709 {
 710         struct driver_data *drv_data = dev_id;
 711         u32 sccr1_reg;
 712         u32 mask = drv_data->mask_sr;
 713         u32 status;
 714
 715         /*
 716          * The IRQ might be shared with other peripherals so we must first
 717          * check that are we RPM suspended or not. If we are we assume that
 718          * the IRQ was not for us (we shouldn't be RPM suspended when the
 719          * interrupt is enabled).
 720          */
 721         if (pm_runtime_suspended(&drv_data->pdev->dev))
 722                 return IRQ_NONE;
 723
 724         /*
 725          * If the device is not yet in RPM suspended state and we get an
 726          * interrupt that is meant for another device, check if status bits
 727          * are all set to one. That means that the device is already
 728          * powered off.
 729          */
 730         status = pxa2xx_spi_read(drv_data, SSSR);
 731         if (status == ~0)
 732                 return IRQ_NONE;
 733
 734         sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
 735
 736         /* Ignore possible writes if we don't need to write */
 737         if (!(sccr1_reg & SSCR1_TIE))
 738                 mask &= ~SSSR_TFS;
 739
 740         /* Ignore RX timeout interrupt if it is disabled */
 741         if (!(sccr1_reg & SSCR1_TINTE))
 742                 mask &= ~SSSR_TINT;
 743
 744         if (!(status & mask))
 745                 return IRQ_NONE;
 746
 747         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1);
 748         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
 749
 750         if (!drv_data->master->cur_msg) {
 751                 handle_bad_msg(drv_data);
 752                 /* Never fail */
 753                 return IRQ_HANDLED;
 754         }
 755
 756         return drv_data->transfer_handler(drv_data);
 757 }
 758
 759 /*
 760  * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply
 761  * input frequency by fractions of 2^24. It also has a divider by 5.
 762  *
 763  * There are formulas to get baud rate value for given input frequency and
 764  * divider parameters, such as DDS_CLK_RATE and SCR:
 765  *
 766  * Fsys = 200MHz
 767  *
 768  * Fssp = Fsys * DDS_CLK_RATE / 2^24                    (1)
 769  * Baud rate = Fsclk = Fssp / (2 * (SCR + 1))           (2)
 770  *
 771  * DDS_CLK_RATE either 2^n or 2^n / 5.
 772  * SCR is in range 0 .. 255
 773  *
 774  * Divisor = 5^i * 2^j * 2 * k
 775  *       i = [0, 1]      i = 1 iff j = 0 or j > 3
 776  *       j = [0, 23]     j = 0 iff i = 1
 777  *       k = [1, 256]
 778  * Special case: j = 0, i = 1: Divisor = 2 / 5
 779  *
 780  * Accordingly to the specification the recommended values for DDS_CLK_RATE
 781  * are:
 782  *      Case 1:         2^n, n = [0, 23]
 783  *      Case 2:         2^24 * 2 / 5 (0x666666)
 784  *      Case 3:         less than or equal to 2^24 / 5 / 16 (0x33333)
 785  *
 786  * In all cases the lowest possible value is better.
 787  *
 788  * The function calculates parameters for all cases and chooses the one closest
 789  * to the asked baud rate.
 790  */
 791 static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds)
 792 {
 793         unsigned long xtal = 200000000;
 794         unsigned long fref = xtal / 2;          /* mandatory division by 2,
 795                                                    see (2) */
 796                                                 /* case 3 */
 797         unsigned long fref1 = fref / 2;         /* case 1 */
 798         unsigned long fref2 = fref * 2 / 5;     /* case 2 */
 799         unsigned long scale;
 800         unsigned long q, q1, q2;
 801         long r, r1, r2;
 802         u32 mul;
 803
 804         /* Case 1 */
 805
 806         /* Set initial value for DDS_CLK_RATE */
 807         mul = (1 << 24) >> 1;
 808
 809         /* Calculate initial quot */
 810         q1 = DIV_ROUND_UP(fref1, rate);
 811
 812         /* Scale q1 if it's too big */
 813         if (q1 > 256) {
 814                 /* Scale q1 to range [1, 512] */
 815                 scale = fls_long(q1 - 1);
 816                 if (scale > 9) {
 817                         q1 >>= scale - 9;
 818                         mul >>= scale - 9;
 819                 }
 820
 821                 /* Round the result if we have a remainder */
 822                 q1 += q1 & 1;
 823         }
 824
 825         /* Decrease DDS_CLK_RATE as much as we can without loss in precision */
 826         scale = __ffs(q1);
 827         q1 >>= scale;
 828         mul >>= scale;
 829
 830         /* Get the remainder */
 831         r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate);
 832
 833         /* Case 2 */
 834
 835         q2 = DIV_ROUND_UP(fref2, rate);
 836         r2 = abs(fref2 / q2 - rate);
 837
 838         /*
 839          * Choose the best between two: less remainder we have the better. We
 840          * can't go case 2 if q2 is greater than 256 since SCR register can
 841          * hold only values 0 .. 255.
 842          */
 843         if (r2 >= r1 || q2 > 256) {
 844                 /* case 1 is better */
 845                 r = r1;
 846                 q = q1;
 847         } else {
 848                 /* case 2 is better */
 849                 r = r2;
 850                 q = q2;
 851                 mul = (1 << 24) * 2 / 5;
 852         }
 853
 854         /* Check case 3 only if the divisor is big enough */
 855         if (fref / rate >= 80) {
 856                 u64 fssp;
 857                 u32 m;
 858
 859                 /* Calculate initial quot */
 860                 q1 = DIV_ROUND_UP(fref, rate);
 861                 m = (1 << 24) / q1;
 862
 863                 /* Get the remainder */
 864                 fssp = (u64)fref * m;
 865                 do_div(fssp, 1 << 24);
 866                 r1 = abs(fssp - rate);
 867
 868                 /* Choose this one if it suits better */
 869                 if (r1 < r) {
 870                         /* case 3 is better */
 871                         q = 1;
 872                         mul = m;
 873                 }
 874         }
 875
 876         *dds = mul;
 877         return q - 1;
 878 }
 879
 880 static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 881 {
 882         unsigned long ssp_clk = drv_data->master->max_speed_hz;
 883         const struct ssp_device *ssp = drv_data->ssp;
 884
 885         rate = min_t(int, ssp_clk, rate);
 886
 887         if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
 888                 return (ssp_clk / (2 * rate) - 1) & 0xff;
 889         else
 890                 return (ssp_clk / rate - 1) & 0xfff;
 891 }
 892
 893 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
 894                                            int rate)
 895 {
 896         struct chip_data *chip =
 897                 spi_get_ctldata(drv_data->master->cur_msg->spi);
 898         unsigned int clk_div;
 899
 900         switch (drv_data->ssp_type) {
 901         case QUARK_X1000_SSP:
 902                 clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate);
 903                 break;
 904         default:
 905                 clk_div = ssp_get_clk_div(drv_data, rate);
 906                 break;
 907         }
 908         return clk_div << 8;
 909 }
 910
 911 static bool pxa2xx_spi_can_dma(struct spi_controller *master,
 912                                struct spi_device *spi,
 913                                struct spi_transfer *xfer)
 914 {
 915         struct chip_data *chip = spi_get_ctldata(spi);
 916
 917         return chip->enable_dma &&
 918                xfer->len <= MAX_DMA_LEN &&
 919                xfer->len >= chip->dma_burst_size;
 920 }
 921
 922 static int pxa2xx_spi_transfer_one(struct spi_controller *master,
 923                                    struct spi_device *spi,
 924                                    struct spi_transfer *transfer)
 925 {
 926         struct driver_data *drv_data = spi_controller_get_devdata(master);
 927         struct spi_message *message = master->cur_msg;
 928         struct chip_data *chip = spi_get_ctldata(message->spi);
 929         u32 dma_thresh = chip->dma_threshold;
 930         u32 dma_burst = chip->dma_burst_size;
 931         u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data);
 932         u32 clk_div;
 933         u8 bits;
 934         u32 speed;
 935         u32 cr0;
 936         u32 cr1;
 937         int err;
 938         int dma_mapped;
 939
 940         /* Check if we can DMA this transfer */
 941         if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
 942
 943                 /* reject already-mapped transfers; PIO won't always work */
 944                 if (message->is_dma_mapped
 945                                 || transfer->rx_dma || transfer->tx_dma) {
 946                         dev_err(&drv_data->pdev->dev,
 947                                 "Mapped transfer length of %u is greater than %d\n",
 948                                 transfer->len, MAX_DMA_LEN);
 949                         return -EINVAL;
 950                 }
 951
 952                 /* warn ... we force this to PIO mode */
 953                 dev_warn_ratelimited(&message->spi->dev,
 954                                      "DMA disabled for transfer length %ld greater than %d\n",
 955                                      (long)transfer->len, MAX_DMA_LEN);
 956         }
 957
 958         /* Setup the transfer state based on the type of transfer */
 959         if (pxa2xx_spi_flush(drv_data) == 0) {
 960                 dev_err(&drv_data->pdev->dev, "Flush failed\n");
 961                 return -EIO;
 962         }
 963         drv_data->n_bytes = chip->n_bytes;
 964         drv_data->tx = (void *)transfer->tx_buf;
 965         drv_data->tx_end = drv_data->tx + transfer->len;
 966         drv_data->rx = transfer->rx_buf;
 967         drv_data->rx_end = drv_data->rx + transfer->len;
 968         drv_data->write = drv_data->tx ? chip->write : null_writer;
 969         drv_data->read = drv_data->rx ? chip->read : null_reader;
 970
 971         /* Change speed and bit per word on a per transfer */
 972         bits = transfer->bits_per_word;
 973         speed = transfer->speed_hz;
 974
 975         clk_div = pxa2xx_ssp_get_clk_div(drv_data, speed);
 976
 977         if (bits <= 8) {
 978                 drv_data->n_bytes = 1;
 979                 drv_data->read = drv_data->read != null_reader ?
 980                                         u8_reader : null_reader;
 981                 drv_data->write = drv_data->write != null_writer ?
 982                                         u8_writer : null_writer;
 983         } else if (bits <= 16) {
 984                 drv_data->n_bytes = 2;
 985                 drv_data->read = drv_data->read != null_reader ?
 986                                         u16_reader : null_reader;
 987                 drv_data->write = drv_data->write != null_writer ?
 988                                         u16_writer : null_writer;
 989         } else if (bits <= 32) {
 990                 drv_data->n_bytes = 4;
 991                 drv_data->read = drv_data->read != null_reader ?
 992                                         u32_reader : null_reader;
 993                 drv_data->write = drv_data->write != null_writer ?
 994                                         u32_writer : null_writer;
 995         }
 996         /*
 997          * if bits/word is changed in dma mode, then must check the
 998          * thresholds and burst also
 999          */
1000         if (chip->enable_dma) {
1001                 if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
1002                                                 message->spi,
1003                                                 bits, &dma_burst,
1004                                                 &dma_thresh))
1005                         dev_warn_ratelimited(&message->spi->dev,
1006                                              "DMA burst size reduced to match bits_per_word\n");
1007         }
1008
1009         dma_mapped = master->can_dma &&
1010                      master->can_dma(master, message->spi, transfer) &&
1011                      master->cur_msg_mapped;
1012         if (dma_mapped) {
1013
1014                 /* Ensure we have the correct interrupt handler */
1015                 drv_data->transfer_handler = pxa2xx_spi_dma_transfer;
1016
1017                 err = pxa2xx_spi_dma_prepare(drv_data, transfer);
1018                 if (err)
1019                         return err;
1020
1021                 /* Clear status and start DMA engine */
1022                 cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
1023                 pxa2xx_spi_write(drv_data, SSSR, drv_data->clear_sr);
1024
1025                 pxa2xx_spi_dma_start(drv_data);
1026         } else {
1027                 /* Ensure we have the correct interrupt handler */
1028                 drv_data->transfer_handler = interrupt_transfer;
1029
1030                 /* Clear status  */
1031                 cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
1032                 write_SSSR_CS(drv_data, drv_data->clear_sr);
1033         }
1034
1035         /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
1036         cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
1037         if (!pxa25x_ssp_comp(drv_data))
1038                 dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
1039                         master->max_speed_hz
1040                                 / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
1041                         dma_mapped ? "DMA" : "PIO");
1042         else
1043                 dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
1044                         master->max_speed_hz / 2
1045                                 / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
1046                         dma_mapped ? "DMA" : "PIO");
1047
1048         if (is_lpss_ssp(drv_data)) {
1049                 if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff)
1050                     != chip->lpss_rx_threshold)
1051                         pxa2xx_spi_write(drv_data, SSIRF,
1052                                          chip->lpss_rx_threshold);
1053                 if ((pxa2xx_spi_read(drv_data, SSITF) & 0xffff)
1054                     != chip->lpss_tx_threshold)
1055                         pxa2xx_spi_write(drv_data, SSITF,
1056                                          chip->lpss_tx_threshold);
1057         }
1058
1059         if (is_quark_x1000_ssp(drv_data) &&
1060             (pxa2xx_spi_read(drv_data, DDS_RATE) != chip->dds_rate))
1061                 pxa2xx_spi_write(drv_data, DDS_RATE, chip->dds_rate);
1062
1063         /* see if we need to reload the config registers */
1064         if ((pxa2xx_spi_read(drv_data, SSCR0) != cr0)
1065             || (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
1066             != (cr1 & change_mask)) {
1067                 /* stop the SSP, and update the other bits */
1068                 pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
1069                 if (!pxa25x_ssp_comp(drv_data))
1070                         pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
1071                 /* first set CR1 without interrupt and service enables */
1072                 pxa2xx_spi_write(drv_data, SSCR1, cr1 & change_mask);
1073                 /* restart the SSP */
1074                 pxa2xx_spi_write(drv_data, SSCR0, cr0);
1075
1076         } else {
1077                 if (!pxa25x_ssp_comp(drv_data))
1078                         pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
1079         }
1080
1081         if (drv_data->ssp_type == MMP2_SSP) {
1082                 u8 tx_level = (pxa2xx_spi_read(drv_data, SSSR)
1083                                         & SSSR_TFL_MASK) >> 8;
1084
1085                 if (tx_level) {
1086                         /* On MMP2, flipping SSE doesn't to empty TXFIFO. */
1087                         dev_warn(&spi->dev, "%d bytes of garbage in TXFIFO!\n",
1088                                                                 tx_level);
1089                         if (tx_level > transfer->len)
1090                                 tx_level = transfer->len;
1091                         drv_data->tx += tx_level;
1092                 }
1093         }
1094
1095         if (spi_controller_is_slave(master)) {
1096                 while (drv_data->write(drv_data))
1097                         ;
1098                 if (drv_data->gpiod_ready) {
1099                         gpiod_set_value(drv_data->gpiod_ready, 1);
1100                         udelay(1);
1101                         gpiod_set_value(drv_data->gpiod_ready, 0);
1102                 }
1103         }
1104
1105         /*
1106          * Release the data by enabling service requests and interrupts,
1107          * without changing any mode bits
1108          */
1109         pxa2xx_spi_write(drv_data, SSCR1, cr1);
1110
1111         return 1;
1112 }
1113
1114 static int pxa2xx_spi_slave_abort(struct spi_master *master)
1115 {
1116         struct driver_data *drv_data = spi_controller_get_devdata(master);
1117
1118         /* Stop and reset SSP */
1119         write_SSSR_CS(drv_data, drv_data->clear_sr);
1120         reset_sccr1(drv_data);
1121         if (!pxa25x_ssp_comp(drv_data))
1122                 pxa2xx_spi_write(drv_data, SSTO, 0);
1123         pxa2xx_spi_flush(drv_data);
1124         pxa2xx_spi_write(drv_data, SSCR0,
1125                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1126
1127         dev_dbg(&drv_data->pdev->dev, "transfer aborted\n");
1128
1129         drv_data->master->cur_msg->status = -EINTR;
1130         spi_finalize_current_transfer(drv_data->master);
1131
1132         return 0;
1133 }
1134
1135 static void pxa2xx_spi_handle_err(struct spi_controller *master,
1136                                  struct spi_message *msg)
1137 {
1138         struct driver_data *drv_data = spi_controller_get_devdata(master);
1139
1140         /* Disable the SSP */
1141         pxa2xx_spi_write(drv_data, SSCR0,
1142                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1143         /* Clear and disable interrupts and service requests */
1144         write_SSSR_CS(drv_data, drv_data->clear_sr);
1145         pxa2xx_spi_write(drv_data, SSCR1,
1146                          pxa2xx_spi_read(drv_data, SSCR1)
1147                          & ~(drv_data->int_cr1 | drv_data->dma_cr1));
1148         if (!pxa25x_ssp_comp(drv_data))
1149                 pxa2xx_spi_write(drv_data, SSTO, 0);
1150
1151         /*
1152          * Stop the DMA if running. Note DMA callback handler may have unset
1153          * the dma_running already, which is fine as stopping is not needed
1154          * then but we shouldn't rely this flag for anything else than
1155          * stopping. For instance to differentiate between PIO and DMA
1156          * transfers.
1157          */
1158         if (atomic_read(&drv_data->dma_running))
1159                 pxa2xx_spi_dma_stop(drv_data);
1160 }
1161
1162 static int pxa2xx_spi_unprepare_transfer(struct spi_controller *master)
1163 {
1164         struct driver_data *drv_data = spi_controller_get_devdata(master);
1165
1166         /* Disable the SSP now */
1167         pxa2xx_spi_write(drv_data, SSCR0,
1168                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1169
1170         return 0;
1171 }
1172
1173 static int setup_cs(struct spi_device *spi, struct chip_data *chip,
1174                     struct pxa2xx_spi_chip *chip_info)
1175 {
1176         struct driver_data *drv_data =
1177                 spi_controller_get_devdata(spi->controller);
1178         struct gpio_desc *gpiod;
1179         int err = 0;
1180
1181         if (chip == NULL)
1182                 return 0;
1183
1184         if (drv_data->cs_gpiods) {
1185                 gpiod = drv_data->cs_gpiods[spi->chip_select];
1186                 if (gpiod) {
1187                         chip->gpiod_cs = gpiod;
1188                         chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
1189                         gpiod_set_value(gpiod, chip->gpio_cs_inverted);
1190                 }
1191
1192                 return 0;
1193         }
1194
1195         if (chip_info == NULL)
1196                 return 0;
1197
1198         /* NOTE: setup() can be called multiple times, possibly with
1199          * different chip_info, release previously requested GPIO
1200          */
1201         if (chip->gpiod_cs) {
1202                 gpiod_put(chip->gpiod_cs);
1203                 chip->gpiod_cs = NULL;
1204         }
1205
1206         /* If (*cs_control) is provided, ignore GPIO chip select */
1207         if (chip_info->cs_control) {
1208                 chip->cs_control = chip_info->cs_control;
1209                 return 0;
1210         }
1211
1212         if (gpio_is_valid(chip_info->gpio_cs)) {
1213                 err = gpio_request(chip_info->gpio_cs, "SPI_CS");
1214                 if (err) {
1215                         dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
1216                                 chip_info->gpio_cs);
1217                         return err;
1218                 }
1219
1220                 gpiod = gpio_to_desc(chip_info->gpio_cs);
1221                 chip->gpiod_cs = gpiod;
1222                 chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
1223
1224                 err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted);
1225         }
1226
1227         return err;
1228 }
1229
1230 static int setup(struct spi_device *spi)
1231 {
1232         struct pxa2xx_spi_chip *chip_info;
1233         struct chip_data *chip;
1234         const struct lpss_config *config;
1235         struct driver_data *drv_data =
1236                 spi_controller_get_devdata(spi->controller);
1237         uint tx_thres, tx_hi_thres, rx_thres;
1238
1239         switch (drv_data->ssp_type) {
1240         case QUARK_X1000_SSP:
1241                 tx_thres = TX_THRESH_QUARK_X1000_DFLT;
1242                 tx_hi_thres = 0;
1243                 rx_thres = RX_THRESH_QUARK_X1000_DFLT;
1244                 break;
1245         case CE4100_SSP:
1246                 tx_thres = TX_THRESH_CE4100_DFLT;
1247                 tx_hi_thres = 0;
1248                 rx_thres = RX_THRESH_CE4100_DFLT;
1249                 break;
1250         case LPSS_LPT_SSP:
1251         case LPSS_BYT_SSP:
1252         case LPSS_BSW_SSP:
1253         case LPSS_SPT_SSP:
1254         case LPSS_BXT_SSP:
1255         case LPSS_CNL_SSP:
1256                 config = lpss_get_config(drv_data);
1257                 tx_thres = config->tx_threshold_lo;
1258                 tx_hi_thres = config->tx_threshold_hi;
1259                 rx_thres = config->rx_threshold;
1260                 break;
1261         default:
1262                 tx_hi_thres = 0;
1263                 if (spi_controller_is_slave(drv_data->master)) {
1264                         tx_thres = 1;
1265                         rx_thres = 2;
1266                 } else {
1267                         tx_thres = TX_THRESH_DFLT;
1268                         rx_thres = RX_THRESH_DFLT;
1269                 }
1270                 break;
1271         }
1272
1273         /* Only alloc on first setup */
1274         chip = spi_get_ctldata(spi);
1275         if (!chip) {
1276                 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1277                 if (!chip)
1278                         return -ENOMEM;
1279
1280                 if (drv_data->ssp_type == CE4100_SSP) {
1281                         if (spi->chip_select > 4) {
1282                                 dev_err(&spi->dev,
1283                                         "failed setup: cs number must not be > 4.\n");
1284                                 kfree(chip);
1285                                 return -EINVAL;
1286                         }
1287
1288                         chip->frm = spi->chip_select;
1289                 }
1290                 chip->enable_dma = drv_data->master_info->enable_dma;
1291                 chip->timeout = TIMOUT_DFLT;
1292         }
1293
1294         /* protocol drivers may change the chip settings, so...
1295          * if chip_info exists, use it */
1296         chip_info = spi->controller_data;
1297
1298         /* chip_info isn't always needed */
1299         chip->cr1 = 0;
1300         if (chip_info) {
1301                 if (chip_info->timeout)
1302                         chip->timeout = chip_info->timeout;
1303                 if (chip_info->tx_threshold)
1304                         tx_thres = chip_info->tx_threshold;
1305                 if (chip_info->tx_hi_threshold)
1306                         tx_hi_thres = chip_info->tx_hi_threshold;
1307                 if (chip_info->rx_threshold)
1308                         rx_thres = chip_info->rx_threshold;
1309                 chip->dma_threshold = 0;
1310                 if (chip_info->enable_loopback)
1311                         chip->cr1 = SSCR1_LBM;
1312         }
1313         if (spi_controller_is_slave(drv_data->master)) {
1314                 chip->cr1 |= SSCR1_SCFR;
1315                 chip->cr1 |= SSCR1_SCLKDIR;
1316                 chip->cr1 |= SSCR1_SFRMDIR;
1317                 chip->cr1 |= SSCR1_SPH;
1318         }
1319
1320         chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres);
1321         chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres)
1322                                 | SSITF_TxHiThresh(tx_hi_thres);
1323
1324         /* set dma burst and threshold outside of chip_info path so that if
1325          * chip_info goes away after setting chip->enable_dma, the
1326          * burst and threshold can still respond to changes in bits_per_word */
1327         if (chip->enable_dma) {
1328                 /* set up legal burst and threshold for dma */
1329                 if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
1330                                                 spi->bits_per_word,
1331                                                 &chip->dma_burst_size,
1332                                                 &chip->dma_threshold)) {
1333                         dev_warn(&spi->dev,
1334                                  "in setup: DMA burst size reduced to match bits_per_word\n");
1335                 }
1336         }
1337
1338         switch (drv_data->ssp_type) {
1339         case QUARK_X1000_SSP:
1340                 chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres)
1341                                    & QUARK_X1000_SSCR1_RFT)
1342                                    | (QUARK_X1000_SSCR1_TxTresh(tx_thres)
1343                                    & QUARK_X1000_SSCR1_TFT);
1344                 break;
1345         case CE4100_SSP:
1346                 chip->threshold = (CE4100_SSCR1_RxTresh(rx_thres) & CE4100_SSCR1_RFT) |
1347                         (CE4100_SSCR1_TxTresh(tx_thres) & CE4100_SSCR1_TFT);
1348                 break;
1349         default:
1350                 chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
1351                         (SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
1352                 break;
1353         }
1354
1355         chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
1356         chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
1357                         | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
1358
1359         if (spi->mode & SPI_LOOP)
1360                 chip->cr1 |= SSCR1_LBM;
1361
1362         if (spi->bits_per_word <= 8) {
1363                 chip->n_bytes = 1;
1364                 chip->read = u8_reader;
1365                 chip->write = u8_writer;
1366         } else if (spi->bits_per_word <= 16) {
1367                 chip->n_bytes = 2;
1368                 chip->read = u16_reader;
1369                 chip->write = u16_writer;
1370         } else if (spi->bits_per_word <= 32) {
1371                 chip->n_bytes = 4;
1372                 chip->read = u32_reader;
1373                 chip->write = u32_writer;
1374         }
1375
1376         spi_set_ctldata(spi, chip);
1377
1378         if (drv_data->ssp_type == CE4100_SSP)
1379                 return 0;
1380
1381         return setup_cs(spi, chip, chip_info);
1382 }
1383
1384 static void cleanup(struct spi_device *spi)
1385 {
1386         struct chip_data *chip = spi_get_ctldata(spi);
1387         struct driver_data *drv_data =
1388                 spi_controller_get_devdata(spi->controller);
1389
1390         if (!chip)
1391                 return;
1392
1393         if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods &&
1394             chip->gpiod_cs)
1395                 gpiod_put(chip->gpiod_cs);
1396
1397         kfree(chip);
1398 }
1399
1400 static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
1401         { "INT33C0", LPSS_LPT_SSP },
1402         { "INT33C1", LPSS_LPT_SSP },
1403         { "INT3430", LPSS_LPT_SSP },
1404         { "INT3431", LPSS_LPT_SSP },
1405         { "80860F0E", LPSS_BYT_SSP },
1406         { "8086228E", LPSS_BSW_SSP },
1407         { },
1408 };
1409 MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
1410
1411 /*
1412  * PCI IDs of compound devices that integrate both host controller and private
1413  * integrated DMA engine. Please note these are not used in module
1414  * autoloading and probing in this module but matching the LPSS SSP type.
1415  */
1416 static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
1417         /* SPT-LP */
1418         { PCI_VDEVICE(INTEL, 0x9d29), LPSS_SPT_SSP },
1419         { PCI_VDEVICE(INTEL, 0x9d2a), LPSS_SPT_SSP },
1420         /* SPT-H */
1421         { PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP },
1422         { PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP },
1423         /* KBL-H */
1424         { PCI_VDEVICE(INTEL, 0xa2a9), LPSS_SPT_SSP },
1425         { PCI_VDEVICE(INTEL, 0xa2aa), LPSS_SPT_SSP },
1426         /* BXT A-Step */
1427         { PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP },
1428         { PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP },
1429         { PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP },
1430         /* BXT B-Step */
1431         { PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
1432         { PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
1433         { PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
1434         /* GLK */
1435         { PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP },
1436         { PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP },
1437         { PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP },
1438         /* ICL-LP */
1439         { PCI_VDEVICE(INTEL, 0x34aa), LPSS_CNL_SSP },
1440         { PCI_VDEVICE(INTEL, 0x34ab), LPSS_CNL_SSP },
1441         { PCI_VDEVICE(INTEL, 0x34fb), LPSS_CNL_SSP },
1442         /* APL */
1443         { PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
1444         { PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
1445         { PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP },
1446         /* CNL-LP */
1447         { PCI_VDEVICE(INTEL, 0x9daa), LPSS_CNL_SSP },
1448         { PCI_VDEVICE(INTEL, 0x9dab), LPSS_CNL_SSP },
1449         { PCI_VDEVICE(INTEL, 0x9dfb), LPSS_CNL_SSP },
1450         /* CNL-H */
1451         { PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP },
1452         { PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP },
1453         { PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP },
1454         { },
1455 };
1456
1457 static const struct of_device_id pxa2xx_spi_of_match[] = {
1458         { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP },
1459         {},
1460 };
1461 MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match);
1462
1463 #ifdef CONFIG_ACPI
1464
1465 static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
1466 {
1467         unsigned int devid;
1468         int port_id = -1;
1469
1470         if (adev && adev->pnp.unique_id &&
1471             !kstrtouint(adev->pnp.unique_id, 0, &devid))
1472                 port_id = devid;
1473         return port_id;
1474 }
1475
1476 #else /* !CONFIG_ACPI */
1477
1478 static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
1479 {
1480         return -1;
1481 }
1482
1483 #endif /* CONFIG_ACPI */
1484
1485
1486 #ifdef CONFIG_PCI
1487
1488 static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
1489 {
1490         struct device *dev = param;
1491
1492         if (dev != chan->device->dev->parent)
1493                 return false;
1494
1495         return true;
1496 }
1497
1498 #endif /* CONFIG_PCI */
1499
1500 static struct pxa2xx_spi_master *
1501 pxa2xx_spi_init_pdata(struct platform_device *pdev)
1502 {
1503         struct pxa2xx_spi_master *pdata;
1504         struct acpi_device *adev;
1505         struct ssp_device *ssp;
1506         struct resource *res;
1507         const struct acpi_device_id *adev_id = NULL;
1508         const struct pci_device_id *pcidev_id = NULL;
1509         const struct of_device_id *of_id = NULL;
1510         enum pxa_ssp_type type;
1511
1512         adev = ACPI_COMPANION(&pdev->dev);
1513
1514         if (pdev->dev.of_node)
1515                 of_id = of_match_device(pdev->dev.driver->of_match_table,
1516                                         &pdev->dev);
1517         else if (dev_is_pci(pdev->dev.parent))
1518                 pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match,
1519                                          to_pci_dev(pdev->dev.parent));
1520         else if (adev)
1521                 adev_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
1522                                             &pdev->dev);
1523         else
1524                 return NULL;
1525
1526         if (adev_id)
1527                 type = (enum pxa_ssp_type)adev_id->driver_data;
1528         else if (pcidev_id)
1529                 type = (enum pxa_ssp_type)pcidev_id->driver_data;
1530         else if (of_id)
1531                 type = (enum pxa_ssp_type)of_id->data;
1532         else
1533                 return NULL;
1534
1535         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1536         if (!pdata)
1537                 return NULL;
1538
1539         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1540         if (!res)
1541                 return NULL;
1542
1543         ssp = &pdata->ssp;
1544
1545         ssp->phys_base = res->start;
1546         ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res);
1547         if (IS_ERR(ssp->mmio_base))
1548                 return NULL;
1549
1550 #ifdef CONFIG_PCI
1551         if (pcidev_id) {
1552                 pdata->tx_param = pdev->dev.parent;
1553                 pdata->rx_param = pdev->dev.parent;
1554                 pdata->dma_filter = pxa2xx_spi_idma_filter;
1555         }
1556 #endif
1557
1558         ssp->clk = devm_clk_get(&pdev->dev, NULL);
1559         ssp->irq = platform_get_irq(pdev, 0);
1560         ssp->type = type;
1561         ssp->pdev = pdev;
1562         ssp->port_id = pxa2xx_spi_get_port_id(adev);
1563
1564         pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
1565         pdata->num_chipselect = 1;
1566         pdata->enable_dma = true;
1567
1568         return pdata;
1569 }
1570
1571 static int pxa2xx_spi_fw_translate_cs(struct spi_controller *master,
1572                                       unsigned int cs)
1573 {
1574         struct driver_data *drv_data = spi_controller_get_devdata(master);
1575
1576         if (has_acpi_companion(&drv_data->pdev->dev)) {
1577                 switch (drv_data->ssp_type) {
1578                 /*
1579                  * For Atoms the ACPI DeviceSelection used by the Windows
1580                  * driver starts from 1 instead of 0 so translate it here
1581                  * to match what Linux expects.
1582                  */
1583                 case LPSS_BYT_SSP:
1584                 case LPSS_BSW_SSP:
1585                         return cs - 1;
1586
1587                 default:
1588                         break;
1589                 }
1590         }
1591
1592         return cs;
1593 }
1594
1595 static int pxa2xx_spi_probe(struct platform_device *pdev)
1596 {
1597         struct device *dev = &pdev->dev;
1598         struct pxa2xx_spi_master *platform_info;
1599         struct spi_controller *master;
1600         struct driver_data *drv_data;
1601         struct ssp_device *ssp;
1602         const struct lpss_config *config;
1603         int status, count;
1604         u32 tmp;
1605
1606         platform_info = dev_get_platdata(dev);
1607         if (!platform_info) {
1608                 platform_info = pxa2xx_spi_init_pdata(pdev);
1609                 if (!platform_info) {
1610                         dev_err(&pdev->dev, "missing platform data\n");
1611                         return -ENODEV;
1612                 }
1613         }
1614
1615         ssp = pxa_ssp_request(pdev->id, pdev->name);
1616         if (!ssp)
1617                 ssp = &platform_info->ssp;
1618
1619         if (!ssp->mmio_base) {
1620                 dev_err(&pdev->dev, "failed to get ssp\n");
1621                 return -ENODEV;
1622         }
1623
1624         if (platform_info->is_slave)
1625                 master = spi_alloc_slave(dev, sizeof(struct driver_data));
1626         else
1627                 master = spi_alloc_master(dev, sizeof(struct driver_data));
1628
1629         if (!master) {
1630                 dev_err(&pdev->dev, "cannot alloc spi_master\n");
1631                 pxa_ssp_free(ssp);
1632                 return -ENOMEM;
1633         }
1634         drv_data = spi_controller_get_devdata(master);
1635         drv_data->master = master;
1636         drv_data->master_info = platform_info;
1637         drv_data->pdev = pdev;
1638         drv_data->ssp = ssp;
1639
1640         master->dev.of_node = pdev->dev.of_node;
1641         /* the spi->mode bits understood by this driver: */
1642         master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
1643
1644         master->bus_num = ssp->port_id;
1645         master->dma_alignment = DMA_ALIGNMENT;
1646         master->cleanup = cleanup;
1647         master->setup = setup;
1648         master->set_cs = pxa2xx_spi_set_cs;
1649         master->transfer_one = pxa2xx_spi_transfer_one;
1650         master->slave_abort = pxa2xx_spi_slave_abort;
1651         master->handle_err = pxa2xx_spi_handle_err;
1652         master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
1653         master->fw_translate_cs = pxa2xx_spi_fw_translate_cs;
1654         master->auto_runtime_pm = true;
1655         master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
1656
1657         drv_data->ssp_type = ssp->type;
1658
1659         drv_data->ioaddr = ssp->mmio_base;
1660         drv_data->ssdr_physical = ssp->phys_base + SSDR;
1661         if (pxa25x_ssp_comp(drv_data)) {
1662                 switch (drv_data->ssp_type) {
1663                 case QUARK_X1000_SSP:
1664                         master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
1665                         break;
1666                 default:
1667                         master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
1668                         break;
1669                 }
1670
1671                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
1672                 drv_data->dma_cr1 = 0;
1673                 drv_data->clear_sr = SSSR_ROR;
1674                 drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
1675         } else {
1676                 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
1677                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
1678                 drv_data->dma_cr1 = DEFAULT_DMA_CR1;
1679                 drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
1680                 drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS
1681                                                 | SSSR_ROR | SSSR_TUR;
1682         }
1683
1684         status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
1685                         drv_data);
1686         if (status < 0) {
1687                 dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
1688                 goto out_error_master_alloc;
1689         }
1690
1691         /* Setup DMA if requested */
1692         if (platform_info->enable_dma) {
1693                 status = pxa2xx_spi_dma_setup(drv_data);
1694                 if (status) {
1695                         dev_dbg(dev, "no DMA channels available, using PIO\n");
1696                         platform_info->enable_dma = false;
1697                 } else {
1698                         master->can_dma = pxa2xx_spi_can_dma;
1699                 }
1700         }
1701
1702         /* Enable SOC clock */
1703         status = clk_prepare_enable(ssp->clk);
1704         if (status)
1705                 goto out_error_dma_irq_alloc;
1706
1707         master->max_speed_hz = clk_get_rate(ssp->clk);
1708
1709         /* Load default SSP configuration */
1710         pxa2xx_spi_write(drv_data, SSCR0, 0);
1711         switch (drv_data->ssp_type) {
1712         case QUARK_X1000_SSP:
1713                 tmp = QUARK_X1000_SSCR1_RxTresh(RX_THRESH_QUARK_X1000_DFLT) |
1714                       QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT);
1715                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1716
1717                 /* using the Motorola SPI protocol and use 8 bit frame */
1718                 tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8);
1719                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1720                 break;
1721         case CE4100_SSP:
1722                 tmp = CE4100_SSCR1_RxTresh(RX_THRESH_CE4100_DFLT) |
1723                       CE4100_SSCR1_TxTresh(TX_THRESH_CE4100_DFLT);
1724                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1725                 tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8);
1726                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1727                 break;
1728         default:
1729
1730                 if (spi_controller_is_slave(master)) {
1731                         tmp = SSCR1_SCFR |
1732                               SSCR1_SCLKDIR |
1733                               SSCR1_SFRMDIR |
1734                               SSCR1_RxTresh(2) |
1735                               SSCR1_TxTresh(1) |
1736                               SSCR1_SPH;
1737                 } else {
1738                         tmp = SSCR1_RxTresh(RX_THRESH_DFLT) |
1739                               SSCR1_TxTresh(TX_THRESH_DFLT);
1740                 }
1741                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1742                 tmp = SSCR0_Motorola | SSCR0_DataSize(8);
1743                 if (!spi_controller_is_slave(master))
1744                         tmp |= SSCR0_SCR(2);
1745                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1746                 break;
1747         }
1748
1749         if (!pxa25x_ssp_comp(drv_data))
1750                 pxa2xx_spi_write(drv_data, SSTO, 0);
1751
1752         if (!is_quark_x1000_ssp(drv_data))
1753                 pxa2xx_spi_write(drv_data, SSPSP, 0);
1754
1755         if (is_lpss_ssp(drv_data)) {
1756                 lpss_ssp_setup(drv_data);
1757                 config = lpss_get_config(drv_data);
1758                 if (config->reg_capabilities >= 0) {
1759                         tmp = __lpss_ssp_read_priv(drv_data,
1760                                                    config->reg_capabilities);
1761                         tmp &= LPSS_CAPS_CS_EN_MASK;
1762                         tmp >>= LPSS_CAPS_CS_EN_SHIFT;
1763                         platform_info->num_chipselect = ffz(tmp);
1764                 } else if (config->cs_num) {
1765                         platform_info->num_chipselect = config->cs_num;
1766                 }
1767         }
1768         master->num_chipselect = platform_info->num_chipselect;
1769
1770         count = gpiod_count(&pdev->dev, "cs");
1771         if (count > 0) {
1772                 int i;
1773
1774                 master->num_chipselect = max_t(int, count,
1775                         master->num_chipselect);
1776
1777                 drv_data->cs_gpiods = devm_kcalloc(&pdev->dev,
1778                         master->num_chipselect, sizeof(struct gpio_desc *),
1779                         GFP_KERNEL);
1780                 if (!drv_data->cs_gpiods) {
1781                         status = -ENOMEM;
1782                         goto out_error_clock_enabled;
1783                 }
1784
1785                 for (i = 0; i < master->num_chipselect; i++) {
1786                         struct gpio_desc *gpiod;
1787
1788                         gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS);
1789                         if (IS_ERR(gpiod)) {
1790                                 /* Means use native chip select */
1791                                 if (PTR_ERR(gpiod) == -ENOENT)
1792                                         continue;
1793
1794                                 status = PTR_ERR(gpiod);
1795                                 goto out_error_clock_enabled;
1796                         } else {
1797                                 drv_data->cs_gpiods[i] = gpiod;
1798                         }
1799                 }
1800         }
1801
1802         if (platform_info->is_slave) {
1803                 drv_data->gpiod_ready = devm_gpiod_get_optional(dev,
1804                                                 "ready", GPIOD_OUT_LOW);
1805                 if (IS_ERR(drv_data->gpiod_ready)) {
1806                         status = PTR_ERR(drv_data->gpiod_ready);
1807                         goto out_error_clock_enabled;
1808                 }
1809         }
1810
1811         pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
1812         pm_runtime_use_autosuspend(&pdev->dev);
1813         pm_runtime_set_active(&pdev->dev);
1814         pm_runtime_enable(&pdev->dev);
1815
1816         /* Register with the SPI framework */
1817         platform_set_drvdata(pdev, drv_data);
1818         status = devm_spi_register_controller(&pdev->dev, master);
1819         if (status != 0) {
1820                 dev_err(&pdev->dev, "problem registering spi master\n");
1821                 goto out_error_clock_enabled;
1822         }
1823
1824         return status;
1825
1826 out_error_clock_enabled:
1827         pm_runtime_put_noidle(&pdev->dev);
1828         pm_runtime_disable(&pdev->dev);
1829         clk_disable_unprepare(ssp->clk);
1830
1831 out_error_dma_irq_alloc:
1832         pxa2xx_spi_dma_release(drv_data);
1833         free_irq(ssp->irq, drv_data);
1834
1835 out_error_master_alloc:
1836         spi_controller_put(master);
1837         pxa_ssp_free(ssp);
1838         return status;
1839 }
1840
1841 static int pxa2xx_spi_remove(struct platform_device *pdev)
1842 {
1843         struct driver_data *drv_data = platform_get_drvdata(pdev);
1844         struct ssp_device *ssp;
1845
1846         if (!drv_data)
1847                 return 0;
1848         ssp = drv_data->ssp;
1849
1850         pm_runtime_get_sync(&pdev->dev);
1851
1852         /* Disable the SSP at the peripheral and SOC level */
1853         pxa2xx_spi_write(drv_data, SSCR0, 0);
1854         clk_disable_unprepare(ssp->clk);
1855
1856         /* Release DMA */
1857         if (drv_data->master_info->enable_dma)
1858                 pxa2xx_spi_dma_release(drv_data);
1859
1860         pm_runtime_put_noidle(&pdev->dev);
1861         pm_runtime_disable(&pdev->dev);
1862
1863         /* Release IRQ */
1864         free_irq(ssp->irq, drv_data);
1865
1866         /* Release SSP */
1867         pxa_ssp_free(ssp);
1868
1869         return 0;
1870 }
1871
1872 #ifdef CONFIG_PM_SLEEP
1873 static int pxa2xx_spi_suspend(struct device *dev)
1874 {
1875         struct driver_data *drv_data = dev_get_drvdata(dev);
1876         struct ssp_device *ssp = drv_data->ssp;
1877         int status;
1878
1879         status = spi_controller_suspend(drv_data->master);
1880         if (status != 0)
1881                 return status;
1882         pxa2xx_spi_write(drv_data, SSCR0, 0);
1883
1884         if (!pm_runtime_suspended(dev))
1885                 clk_disable_unprepare(ssp->clk);
1886
1887         return 0;
1888 }
1889
1890 static int pxa2xx_spi_resume(struct device *dev)
1891 {
1892         struct driver_data *drv_data = dev_get_drvdata(dev);
1893         struct ssp_device *ssp = drv_data->ssp;
1894         int status;
1895
1896         /* Enable the SSP clock */
1897         if (!pm_runtime_suspended(dev)) {
1898                 status = clk_prepare_enable(ssp->clk);
1899                 if (status)
1900                         return status;
1901         }
1902
1903         /* Start the queue running */
1904         return spi_controller_resume(drv_data->master);
1905 }
1906 #endif
1907
1908 #ifdef CONFIG_PM
1909 static int pxa2xx_spi_runtime_suspend(struct device *dev)
1910 {
1911         struct driver_data *drv_data = dev_get_drvdata(dev);
1912
1913         clk_disable_unprepare(drv_data->ssp->clk);
1914         return 0;
1915 }
1916
1917 static int pxa2xx_spi_runtime_resume(struct device *dev)
1918 {
1919         struct driver_data *drv_data = dev_get_drvdata(dev);
1920         int status;
1921
1922         status = clk_prepare_enable(drv_data->ssp->clk);
1923         return status;
1924 }
1925 #endif
1926
1927 static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
1928         SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
1929         SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend,
1930                            pxa2xx_spi_runtime_resume, NULL)
1931 };
1932
1933 static struct platform_driver driver = {
1934         .driver = {
1935                 .name   = "pxa2xx-spi",
1936                 .pm     = &pxa2xx_spi_pm_ops,
1937                 .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
1938                 .of_match_table = of_match_ptr(pxa2xx_spi_of_match),
1939         },
1940         .probe = pxa2xx_spi_probe,
1941         .remove = pxa2xx_spi_remove,
1942 };
1943
1944 static int __init pxa2xx_spi_init(void)
1945 {
1946         return platform_driver_register(&driver);
1947 }
1948 subsys_initcall(pxa2xx_spi_init);
1949
1950 static void __exit pxa2xx_spi_exit(void)
1951 {
1952         platform_driver_unregister(&driver);
1953 }
1954 module_exit(pxa2xx_spi_exit);