Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma
[sfrench/cifs-2.6.git] / drivers / spi / spi-pxa2xx.c
1 /*
2  * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
3  * Copyright (C) 2013, Intel Corporation
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15
16 #include <linux/bitops.h>
17 #include <linux/init.h>
18 #include <linux/module.h>
19 #include <linux/device.h>
20 #include <linux/ioport.h>
21 #include <linux/errno.h>
22 #include <linux/err.h>
23 #include <linux/interrupt.h>
24 #include <linux/kernel.h>
25 #include <linux/pci.h>
26 #include <linux/platform_device.h>
27 #include <linux/spi/pxa2xx_spi.h>
28 #include <linux/spi/spi.h>
29 #include <linux/delay.h>
30 #include <linux/gpio.h>
31 #include <linux/gpio/consumer.h>
32 #include <linux/slab.h>
33 #include <linux/clk.h>
34 #include <linux/pm_runtime.h>
35 #include <linux/acpi.h>
36 #include <linux/of_device.h>
37
38 #include "spi-pxa2xx.h"
39
40 MODULE_AUTHOR("Stephen Street");
41 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
42 MODULE_LICENSE("GPL");
43 MODULE_ALIAS("platform:pxa2xx-spi");
44
45 #define TIMOUT_DFLT             1000
46
47 /*
48  * for testing SSCR1 changes that require SSP restart, basically
49  * everything except the service and interrupt enables, the pxa270 developer
50  * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
51  * list, but the PXA255 dev man says all bits without really meaning the
52  * service and interrupt enables
53  */
54 #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
55                                 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
56                                 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
57                                 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
58                                 | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
59                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
60
61 #define QUARK_X1000_SSCR1_CHANGE_MASK (QUARK_X1000_SSCR1_STRF   \
62                                 | QUARK_X1000_SSCR1_EFWR        \
63                                 | QUARK_X1000_SSCR1_RFT         \
64                                 | QUARK_X1000_SSCR1_TFT         \
65                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
66
67 #define CE4100_SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
68                                 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
69                                 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
70                                 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
71                                 | CE4100_SSCR1_RFT | CE4100_SSCR1_TFT | SSCR1_MWDS \
72                                 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
73
74 #define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE   BIT(24)
75 #define LPSS_CS_CONTROL_SW_MODE                 BIT(0)
76 #define LPSS_CS_CONTROL_CS_HIGH                 BIT(1)
77 #define LPSS_CAPS_CS_EN_SHIFT                   9
78 #define LPSS_CAPS_CS_EN_MASK                    (0xf << LPSS_CAPS_CS_EN_SHIFT)
79
80 struct lpss_config {
81         /* LPSS offset from drv_data->ioaddr */
82         unsigned offset;
83         /* Register offsets from drv_data->lpss_base or -1 */
84         int reg_general;
85         int reg_ssp;
86         int reg_cs_ctrl;
87         int reg_capabilities;
88         /* FIFO thresholds */
89         u32 rx_threshold;
90         u32 tx_threshold_lo;
91         u32 tx_threshold_hi;
92         /* Chip select control */
93         unsigned cs_sel_shift;
94         unsigned cs_sel_mask;
95         unsigned cs_num;
96 };
97
98 /* Keep these sorted with enum pxa_ssp_type */
99 static const struct lpss_config lpss_platforms[] = {
100         {       /* LPSS_LPT_SSP */
101                 .offset = 0x800,
102                 .reg_general = 0x08,
103                 .reg_ssp = 0x0c,
104                 .reg_cs_ctrl = 0x18,
105                 .reg_capabilities = -1,
106                 .rx_threshold = 64,
107                 .tx_threshold_lo = 160,
108                 .tx_threshold_hi = 224,
109         },
110         {       /* LPSS_BYT_SSP */
111                 .offset = 0x400,
112                 .reg_general = 0x08,
113                 .reg_ssp = 0x0c,
114                 .reg_cs_ctrl = 0x18,
115                 .reg_capabilities = -1,
116                 .rx_threshold = 64,
117                 .tx_threshold_lo = 160,
118                 .tx_threshold_hi = 224,
119         },
120         {       /* LPSS_BSW_SSP */
121                 .offset = 0x400,
122                 .reg_general = 0x08,
123                 .reg_ssp = 0x0c,
124                 .reg_cs_ctrl = 0x18,
125                 .reg_capabilities = -1,
126                 .rx_threshold = 64,
127                 .tx_threshold_lo = 160,
128                 .tx_threshold_hi = 224,
129                 .cs_sel_shift = 2,
130                 .cs_sel_mask = 1 << 2,
131                 .cs_num = 2,
132         },
133         {       /* LPSS_SPT_SSP */
134                 .offset = 0x200,
135                 .reg_general = -1,
136                 .reg_ssp = 0x20,
137                 .reg_cs_ctrl = 0x24,
138                 .reg_capabilities = -1,
139                 .rx_threshold = 1,
140                 .tx_threshold_lo = 32,
141                 .tx_threshold_hi = 56,
142         },
143         {       /* LPSS_BXT_SSP */
144                 .offset = 0x200,
145                 .reg_general = -1,
146                 .reg_ssp = 0x20,
147                 .reg_cs_ctrl = 0x24,
148                 .reg_capabilities = 0xfc,
149                 .rx_threshold = 1,
150                 .tx_threshold_lo = 16,
151                 .tx_threshold_hi = 48,
152                 .cs_sel_shift = 8,
153                 .cs_sel_mask = 3 << 8,
154         },
155         {       /* LPSS_CNL_SSP */
156                 .offset = 0x200,
157                 .reg_general = -1,
158                 .reg_ssp = 0x20,
159                 .reg_cs_ctrl = 0x24,
160                 .reg_capabilities = 0xfc,
161                 .rx_threshold = 1,
162                 .tx_threshold_lo = 32,
163                 .tx_threshold_hi = 56,
164                 .cs_sel_shift = 8,
165                 .cs_sel_mask = 3 << 8,
166         },
167 };
168
169 static inline const struct lpss_config
170 *lpss_get_config(const struct driver_data *drv_data)
171 {
172         return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
173 }
174
175 static bool is_lpss_ssp(const struct driver_data *drv_data)
176 {
177         switch (drv_data->ssp_type) {
178         case LPSS_LPT_SSP:
179         case LPSS_BYT_SSP:
180         case LPSS_BSW_SSP:
181         case LPSS_SPT_SSP:
182         case LPSS_BXT_SSP:
183         case LPSS_CNL_SSP:
184                 return true;
185         default:
186                 return false;
187         }
188 }
189
190 static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
191 {
192         return drv_data->ssp_type == QUARK_X1000_SSP;
193 }
194
195 static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data)
196 {
197         switch (drv_data->ssp_type) {
198         case QUARK_X1000_SSP:
199                 return QUARK_X1000_SSCR1_CHANGE_MASK;
200         case CE4100_SSP:
201                 return CE4100_SSCR1_CHANGE_MASK;
202         default:
203                 return SSCR1_CHANGE_MASK;
204         }
205 }
206
207 static u32
208 pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data)
209 {
210         switch (drv_data->ssp_type) {
211         case QUARK_X1000_SSP:
212                 return RX_THRESH_QUARK_X1000_DFLT;
213         case CE4100_SSP:
214                 return RX_THRESH_CE4100_DFLT;
215         default:
216                 return RX_THRESH_DFLT;
217         }
218 }
219
220 static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data)
221 {
222         u32 mask;
223
224         switch (drv_data->ssp_type) {
225         case QUARK_X1000_SSP:
226                 mask = QUARK_X1000_SSSR_TFL_MASK;
227                 break;
228         case CE4100_SSP:
229                 mask = CE4100_SSSR_TFL_MASK;
230                 break;
231         default:
232                 mask = SSSR_TFL_MASK;
233                 break;
234         }
235
236         return (pxa2xx_spi_read(drv_data, SSSR) & mask) == mask;
237 }
238
239 static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data,
240                                      u32 *sccr1_reg)
241 {
242         u32 mask;
243
244         switch (drv_data->ssp_type) {
245         case QUARK_X1000_SSP:
246                 mask = QUARK_X1000_SSCR1_RFT;
247                 break;
248         case CE4100_SSP:
249                 mask = CE4100_SSCR1_RFT;
250                 break;
251         default:
252                 mask = SSCR1_RFT;
253                 break;
254         }
255         *sccr1_reg &= ~mask;
256 }
257
258 static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data,
259                                    u32 *sccr1_reg, u32 threshold)
260 {
261         switch (drv_data->ssp_type) {
262         case QUARK_X1000_SSP:
263                 *sccr1_reg |= QUARK_X1000_SSCR1_RxTresh(threshold);
264                 break;
265         case CE4100_SSP:
266                 *sccr1_reg |= CE4100_SSCR1_RxTresh(threshold);
267                 break;
268         default:
269                 *sccr1_reg |= SSCR1_RxTresh(threshold);
270                 break;
271         }
272 }
273
274 static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data,
275                                   u32 clk_div, u8 bits)
276 {
277         switch (drv_data->ssp_type) {
278         case QUARK_X1000_SSP:
279                 return clk_div
280                         | QUARK_X1000_SSCR0_Motorola
281                         | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits)
282                         | SSCR0_SSE;
283         default:
284                 return clk_div
285                         | SSCR0_Motorola
286                         | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
287                         | SSCR0_SSE
288                         | (bits > 16 ? SSCR0_EDSS : 0);
289         }
290 }
291
292 /*
293  * Read and write LPSS SSP private registers. Caller must first check that
294  * is_lpss_ssp() returns true before these can be called.
295  */
296 static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset)
297 {
298         WARN_ON(!drv_data->lpss_base);
299         return readl(drv_data->lpss_base + offset);
300 }
301
302 static void __lpss_ssp_write_priv(struct driver_data *drv_data,
303                                   unsigned offset, u32 value)
304 {
305         WARN_ON(!drv_data->lpss_base);
306         writel(value, drv_data->lpss_base + offset);
307 }
308
309 /*
310  * lpss_ssp_setup - perform LPSS SSP specific setup
311  * @drv_data: pointer to the driver private data
312  *
313  * Perform LPSS SSP specific setup. This function must be called first if
314  * one is going to use LPSS SSP private registers.
315  */
316 static void lpss_ssp_setup(struct driver_data *drv_data)
317 {
318         const struct lpss_config *config;
319         u32 value;
320
321         config = lpss_get_config(drv_data);
322         drv_data->lpss_base = drv_data->ioaddr + config->offset;
323
324         /* Enable software chip select control */
325         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
326         value &= ~(LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH);
327         value |= LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH;
328         __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
329
330         /* Enable multiblock DMA transfers */
331         if (drv_data->controller_info->enable_dma) {
332                 __lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
333
334                 if (config->reg_general >= 0) {
335                         value = __lpss_ssp_read_priv(drv_data,
336                                                      config->reg_general);
337                         value |= LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE;
338                         __lpss_ssp_write_priv(drv_data,
339                                               config->reg_general, value);
340                 }
341         }
342 }
343
344 static void lpss_ssp_select_cs(struct spi_device *spi,
345                                const struct lpss_config *config)
346 {
347         struct driver_data *drv_data =
348                 spi_controller_get_devdata(spi->controller);
349         u32 value, cs;
350
351         if (!config->cs_sel_mask)
352                 return;
353
354         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
355
356         cs = spi->chip_select;
357         cs <<= config->cs_sel_shift;
358         if (cs != (value & config->cs_sel_mask)) {
359                 /*
360                  * When switching another chip select output active the
361                  * output must be selected first and wait 2 ssp_clk cycles
362                  * before changing state to active. Otherwise a short
363                  * glitch will occur on the previous chip select since
364                  * output select is latched but state control is not.
365                  */
366                 value &= ~config->cs_sel_mask;
367                 value |= cs;
368                 __lpss_ssp_write_priv(drv_data,
369                                       config->reg_cs_ctrl, value);
370                 ndelay(1000000000 /
371                        (drv_data->controller->max_speed_hz / 2));
372         }
373 }
374
375 static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
376 {
377         struct driver_data *drv_data =
378                 spi_controller_get_devdata(spi->controller);
379         const struct lpss_config *config;
380         u32 value;
381
382         config = lpss_get_config(drv_data);
383
384         if (enable)
385                 lpss_ssp_select_cs(spi, config);
386
387         value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
388         if (enable)
389                 value &= ~LPSS_CS_CONTROL_CS_HIGH;
390         else
391                 value |= LPSS_CS_CONTROL_CS_HIGH;
392         __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
393 }
394
395 static void cs_assert(struct spi_device *spi)
396 {
397         struct chip_data *chip = spi_get_ctldata(spi);
398         struct driver_data *drv_data =
399                 spi_controller_get_devdata(spi->controller);
400
401         if (drv_data->ssp_type == CE4100_SSP) {
402                 pxa2xx_spi_write(drv_data, SSSR, chip->frm);
403                 return;
404         }
405
406         if (chip->cs_control) {
407                 chip->cs_control(PXA2XX_CS_ASSERT);
408                 return;
409         }
410
411         if (chip->gpiod_cs) {
412                 gpiod_set_value(chip->gpiod_cs, chip->gpio_cs_inverted);
413                 return;
414         }
415
416         if (is_lpss_ssp(drv_data))
417                 lpss_ssp_cs_control(spi, true);
418 }
419
420 static void cs_deassert(struct spi_device *spi)
421 {
422         struct chip_data *chip = spi_get_ctldata(spi);
423         struct driver_data *drv_data =
424                 spi_controller_get_devdata(spi->controller);
425         unsigned long timeout;
426
427         if (drv_data->ssp_type == CE4100_SSP)
428                 return;
429
430         /* Wait until SSP becomes idle before deasserting the CS */
431         timeout = jiffies + msecs_to_jiffies(10);
432         while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY &&
433                !time_after(jiffies, timeout))
434                 cpu_relax();
435
436         if (chip->cs_control) {
437                 chip->cs_control(PXA2XX_CS_DEASSERT);
438                 return;
439         }
440
441         if (chip->gpiod_cs) {
442                 gpiod_set_value(chip->gpiod_cs, !chip->gpio_cs_inverted);
443                 return;
444         }
445
446         if (is_lpss_ssp(drv_data))
447                 lpss_ssp_cs_control(spi, false);
448 }
449
450 static void pxa2xx_spi_set_cs(struct spi_device *spi, bool level)
451 {
452         if (level)
453                 cs_deassert(spi);
454         else
455                 cs_assert(spi);
456 }
457
458 int pxa2xx_spi_flush(struct driver_data *drv_data)
459 {
460         unsigned long limit = loops_per_jiffy << 1;
461
462         do {
463                 while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
464                         pxa2xx_spi_read(drv_data, SSDR);
465         } while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit);
466         write_SSSR_CS(drv_data, SSSR_ROR);
467
468         return limit;
469 }
470
471 static int null_writer(struct driver_data *drv_data)
472 {
473         u8 n_bytes = drv_data->n_bytes;
474
475         if (pxa2xx_spi_txfifo_full(drv_data)
476                 || (drv_data->tx == drv_data->tx_end))
477                 return 0;
478
479         pxa2xx_spi_write(drv_data, SSDR, 0);
480         drv_data->tx += n_bytes;
481
482         return 1;
483 }
484
485 static int null_reader(struct driver_data *drv_data)
486 {
487         u8 n_bytes = drv_data->n_bytes;
488
489         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
490                && (drv_data->rx < drv_data->rx_end)) {
491                 pxa2xx_spi_read(drv_data, SSDR);
492                 drv_data->rx += n_bytes;
493         }
494
495         return drv_data->rx == drv_data->rx_end;
496 }
497
498 static int u8_writer(struct driver_data *drv_data)
499 {
500         if (pxa2xx_spi_txfifo_full(drv_data)
501                 || (drv_data->tx == drv_data->tx_end))
502                 return 0;
503
504         pxa2xx_spi_write(drv_data, SSDR, *(u8 *)(drv_data->tx));
505         ++drv_data->tx;
506
507         return 1;
508 }
509
510 static int u8_reader(struct driver_data *drv_data)
511 {
512         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
513                && (drv_data->rx < drv_data->rx_end)) {
514                 *(u8 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
515                 ++drv_data->rx;
516         }
517
518         return drv_data->rx == drv_data->rx_end;
519 }
520
521 static int u16_writer(struct driver_data *drv_data)
522 {
523         if (pxa2xx_spi_txfifo_full(drv_data)
524                 || (drv_data->tx == drv_data->tx_end))
525                 return 0;
526
527         pxa2xx_spi_write(drv_data, SSDR, *(u16 *)(drv_data->tx));
528         drv_data->tx += 2;
529
530         return 1;
531 }
532
533 static int u16_reader(struct driver_data *drv_data)
534 {
535         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
536                && (drv_data->rx < drv_data->rx_end)) {
537                 *(u16 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
538                 drv_data->rx += 2;
539         }
540
541         return drv_data->rx == drv_data->rx_end;
542 }
543
544 static int u32_writer(struct driver_data *drv_data)
545 {
546         if (pxa2xx_spi_txfifo_full(drv_data)
547                 || (drv_data->tx == drv_data->tx_end))
548                 return 0;
549
550         pxa2xx_spi_write(drv_data, SSDR, *(u32 *)(drv_data->tx));
551         drv_data->tx += 4;
552
553         return 1;
554 }
555
556 static int u32_reader(struct driver_data *drv_data)
557 {
558         while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_RNE)
559                && (drv_data->rx < drv_data->rx_end)) {
560                 *(u32 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR);
561                 drv_data->rx += 4;
562         }
563
564         return drv_data->rx == drv_data->rx_end;
565 }
566
567 static void reset_sccr1(struct driver_data *drv_data)
568 {
569         struct chip_data *chip =
570                 spi_get_ctldata(drv_data->controller->cur_msg->spi);
571         u32 sccr1_reg;
572
573         sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
574         switch (drv_data->ssp_type) {
575         case QUARK_X1000_SSP:
576                 sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
577                 break;
578         case CE4100_SSP:
579                 sccr1_reg &= ~CE4100_SSCR1_RFT;
580                 break;
581         default:
582                 sccr1_reg &= ~SSCR1_RFT;
583                 break;
584         }
585         sccr1_reg |= chip->threshold;
586         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
587 }
588
589 static void int_error_stop(struct driver_data *drv_data, const char* msg)
590 {
591         /* Stop and reset SSP */
592         write_SSSR_CS(drv_data, drv_data->clear_sr);
593         reset_sccr1(drv_data);
594         if (!pxa25x_ssp_comp(drv_data))
595                 pxa2xx_spi_write(drv_data, SSTO, 0);
596         pxa2xx_spi_flush(drv_data);
597         pxa2xx_spi_write(drv_data, SSCR0,
598                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
599
600         dev_err(&drv_data->pdev->dev, "%s\n", msg);
601
602         drv_data->controller->cur_msg->status = -EIO;
603         spi_finalize_current_transfer(drv_data->controller);
604 }
605
606 static void int_transfer_complete(struct driver_data *drv_data)
607 {
608         /* Clear and disable interrupts */
609         write_SSSR_CS(drv_data, drv_data->clear_sr);
610         reset_sccr1(drv_data);
611         if (!pxa25x_ssp_comp(drv_data))
612                 pxa2xx_spi_write(drv_data, SSTO, 0);
613
614         spi_finalize_current_transfer(drv_data->controller);
615 }
616
617 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
618 {
619         u32 irq_mask = (pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE) ?
620                        drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
621
622         u32 irq_status = pxa2xx_spi_read(drv_data, SSSR) & irq_mask;
623
624         if (irq_status & SSSR_ROR) {
625                 int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
626                 return IRQ_HANDLED;
627         }
628
629         if (irq_status & SSSR_TUR) {
630                 int_error_stop(drv_data, "interrupt_transfer: fifo underrun");
631                 return IRQ_HANDLED;
632         }
633
634         if (irq_status & SSSR_TINT) {
635                 pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
636                 if (drv_data->read(drv_data)) {
637                         int_transfer_complete(drv_data);
638                         return IRQ_HANDLED;
639                 }
640         }
641
642         /* Drain rx fifo, Fill tx fifo and prevent overruns */
643         do {
644                 if (drv_data->read(drv_data)) {
645                         int_transfer_complete(drv_data);
646                         return IRQ_HANDLED;
647                 }
648         } while (drv_data->write(drv_data));
649
650         if (drv_data->read(drv_data)) {
651                 int_transfer_complete(drv_data);
652                 return IRQ_HANDLED;
653         }
654
655         if (drv_data->tx == drv_data->tx_end) {
656                 u32 bytes_left;
657                 u32 sccr1_reg;
658
659                 sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
660                 sccr1_reg &= ~SSCR1_TIE;
661
662                 /*
663                  * PXA25x_SSP has no timeout, set up rx threshould for the
664                  * remaining RX bytes.
665                  */
666                 if (pxa25x_ssp_comp(drv_data)) {
667                         u32 rx_thre;
668
669                         pxa2xx_spi_clear_rx_thre(drv_data, &sccr1_reg);
670
671                         bytes_left = drv_data->rx_end - drv_data->rx;
672                         switch (drv_data->n_bytes) {
673                         case 4:
674                                 bytes_left >>= 2;
675                                 break;
676                         case 2:
677                                 bytes_left >>= 1;
678                                 break;
679                         }
680
681                         rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data);
682                         if (rx_thre > bytes_left)
683                                 rx_thre = bytes_left;
684
685                         pxa2xx_spi_set_rx_thre(drv_data, &sccr1_reg, rx_thre);
686                 }
687                 pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
688         }
689
690         /* We did something */
691         return IRQ_HANDLED;
692 }
693
694 static void handle_bad_msg(struct driver_data *drv_data)
695 {
696         pxa2xx_spi_write(drv_data, SSCR0,
697                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
698         pxa2xx_spi_write(drv_data, SSCR1,
699                          pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
700         if (!pxa25x_ssp_comp(drv_data))
701                 pxa2xx_spi_write(drv_data, SSTO, 0);
702         write_SSSR_CS(drv_data, drv_data->clear_sr);
703
704         dev_err(&drv_data->pdev->dev,
705                 "bad message state in interrupt handler\n");
706 }
707
708 static irqreturn_t ssp_int(int irq, void *dev_id)
709 {
710         struct driver_data *drv_data = dev_id;
711         u32 sccr1_reg;
712         u32 mask = drv_data->mask_sr;
713         u32 status;
714
715         /*
716          * The IRQ might be shared with other peripherals so we must first
717          * check that are we RPM suspended or not. If we are we assume that
718          * the IRQ was not for us (we shouldn't be RPM suspended when the
719          * interrupt is enabled).
720          */
721         if (pm_runtime_suspended(&drv_data->pdev->dev))
722                 return IRQ_NONE;
723
724         /*
725          * If the device is not yet in RPM suspended state and we get an
726          * interrupt that is meant for another device, check if status bits
727          * are all set to one. That means that the device is already
728          * powered off.
729          */
730         status = pxa2xx_spi_read(drv_data, SSSR);
731         if (status == ~0)
732                 return IRQ_NONE;
733
734         sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1);
735
736         /* Ignore possible writes if we don't need to write */
737         if (!(sccr1_reg & SSCR1_TIE))
738                 mask &= ~SSSR_TFS;
739
740         /* Ignore RX timeout interrupt if it is disabled */
741         if (!(sccr1_reg & SSCR1_TINTE))
742                 mask &= ~SSSR_TINT;
743
744         if (!(status & mask))
745                 return IRQ_NONE;
746
747         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1);
748         pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
749
750         if (!drv_data->controller->cur_msg) {
751                 handle_bad_msg(drv_data);
752                 /* Never fail */
753                 return IRQ_HANDLED;
754         }
755
756         return drv_data->transfer_handler(drv_data);
757 }
758
759 /*
760  * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply
761  * input frequency by fractions of 2^24. It also has a divider by 5.
762  *
763  * There are formulas to get baud rate value for given input frequency and
764  * divider parameters, such as DDS_CLK_RATE and SCR:
765  *
766  * Fsys = 200MHz
767  *
768  * Fssp = Fsys * DDS_CLK_RATE / 2^24                    (1)
769  * Baud rate = Fsclk = Fssp / (2 * (SCR + 1))           (2)
770  *
771  * DDS_CLK_RATE either 2^n or 2^n / 5.
772  * SCR is in range 0 .. 255
773  *
774  * Divisor = 5^i * 2^j * 2 * k
775  *       i = [0, 1]      i = 1 iff j = 0 or j > 3
776  *       j = [0, 23]     j = 0 iff i = 1
777  *       k = [1, 256]
778  * Special case: j = 0, i = 1: Divisor = 2 / 5
779  *
780  * Accordingly to the specification the recommended values for DDS_CLK_RATE
781  * are:
782  *      Case 1:         2^n, n = [0, 23]
783  *      Case 2:         2^24 * 2 / 5 (0x666666)
784  *      Case 3:         less than or equal to 2^24 / 5 / 16 (0x33333)
785  *
786  * In all cases the lowest possible value is better.
787  *
788  * The function calculates parameters for all cases and chooses the one closest
789  * to the asked baud rate.
790  */
791 static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds)
792 {
793         unsigned long xtal = 200000000;
794         unsigned long fref = xtal / 2;          /* mandatory division by 2,
795                                                    see (2) */
796                                                 /* case 3 */
797         unsigned long fref1 = fref / 2;         /* case 1 */
798         unsigned long fref2 = fref * 2 / 5;     /* case 2 */
799         unsigned long scale;
800         unsigned long q, q1, q2;
801         long r, r1, r2;
802         u32 mul;
803
804         /* Case 1 */
805
806         /* Set initial value for DDS_CLK_RATE */
807         mul = (1 << 24) >> 1;
808
809         /* Calculate initial quot */
810         q1 = DIV_ROUND_UP(fref1, rate);
811
812         /* Scale q1 if it's too big */
813         if (q1 > 256) {
814                 /* Scale q1 to range [1, 512] */
815                 scale = fls_long(q1 - 1);
816                 if (scale > 9) {
817                         q1 >>= scale - 9;
818                         mul >>= scale - 9;
819                 }
820
821                 /* Round the result if we have a remainder */
822                 q1 += q1 & 1;
823         }
824
825         /* Decrease DDS_CLK_RATE as much as we can without loss in precision */
826         scale = __ffs(q1);
827         q1 >>= scale;
828         mul >>= scale;
829
830         /* Get the remainder */
831         r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate);
832
833         /* Case 2 */
834
835         q2 = DIV_ROUND_UP(fref2, rate);
836         r2 = abs(fref2 / q2 - rate);
837
838         /*
839          * Choose the best between two: less remainder we have the better. We
840          * can't go case 2 if q2 is greater than 256 since SCR register can
841          * hold only values 0 .. 255.
842          */
843         if (r2 >= r1 || q2 > 256) {
844                 /* case 1 is better */
845                 r = r1;
846                 q = q1;
847         } else {
848                 /* case 2 is better */
849                 r = r2;
850                 q = q2;
851                 mul = (1 << 24) * 2 / 5;
852         }
853
854         /* Check case 3 only if the divisor is big enough */
855         if (fref / rate >= 80) {
856                 u64 fssp;
857                 u32 m;
858
859                 /* Calculate initial quot */
860                 q1 = DIV_ROUND_UP(fref, rate);
861                 m = (1 << 24) / q1;
862
863                 /* Get the remainder */
864                 fssp = (u64)fref * m;
865                 do_div(fssp, 1 << 24);
866                 r1 = abs(fssp - rate);
867
868                 /* Choose this one if it suits better */
869                 if (r1 < r) {
870                         /* case 3 is better */
871                         q = 1;
872                         mul = m;
873                 }
874         }
875
876         *dds = mul;
877         return q - 1;
878 }
879
880 static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
881 {
882         unsigned long ssp_clk = drv_data->controller->max_speed_hz;
883         const struct ssp_device *ssp = drv_data->ssp;
884
885         rate = min_t(int, ssp_clk, rate);
886
887         /*
888          * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
889          * that the SSP transmission rate can be greater than the device rate
890          */
891         if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
892                 return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
893         else
894                 return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
895 }
896
897 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
898                                            int rate)
899 {
900         struct chip_data *chip =
901                 spi_get_ctldata(drv_data->controller->cur_msg->spi);
902         unsigned int clk_div;
903
904         switch (drv_data->ssp_type) {
905         case QUARK_X1000_SSP:
906                 clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate);
907                 break;
908         default:
909                 clk_div = ssp_get_clk_div(drv_data, rate);
910                 break;
911         }
912         return clk_div << 8;
913 }
914
915 static bool pxa2xx_spi_can_dma(struct spi_controller *controller,
916                                struct spi_device *spi,
917                                struct spi_transfer *xfer)
918 {
919         struct chip_data *chip = spi_get_ctldata(spi);
920
921         return chip->enable_dma &&
922                xfer->len <= MAX_DMA_LEN &&
923                xfer->len >= chip->dma_burst_size;
924 }
925
926 static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
927                                    struct spi_device *spi,
928                                    struct spi_transfer *transfer)
929 {
930         struct driver_data *drv_data = spi_controller_get_devdata(controller);
931         struct spi_message *message = controller->cur_msg;
932         struct chip_data *chip = spi_get_ctldata(spi);
933         u32 dma_thresh = chip->dma_threshold;
934         u32 dma_burst = chip->dma_burst_size;
935         u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data);
936         u32 clk_div;
937         u8 bits;
938         u32 speed;
939         u32 cr0;
940         u32 cr1;
941         int err;
942         int dma_mapped;
943
944         /* Check if we can DMA this transfer */
945         if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
946
947                 /* reject already-mapped transfers; PIO won't always work */
948                 if (message->is_dma_mapped
949                                 || transfer->rx_dma || transfer->tx_dma) {
950                         dev_err(&spi->dev,
951                                 "Mapped transfer length of %u is greater than %d\n",
952                                 transfer->len, MAX_DMA_LEN);
953                         return -EINVAL;
954                 }
955
956                 /* warn ... we force this to PIO mode */
957                 dev_warn_ratelimited(&spi->dev,
958                                      "DMA disabled for transfer length %ld greater than %d\n",
959                                      (long)transfer->len, MAX_DMA_LEN);
960         }
961
962         /* Setup the transfer state based on the type of transfer */
963         if (pxa2xx_spi_flush(drv_data) == 0) {
964                 dev_err(&spi->dev, "Flush failed\n");
965                 return -EIO;
966         }
967         drv_data->n_bytes = chip->n_bytes;
968         drv_data->tx = (void *)transfer->tx_buf;
969         drv_data->tx_end = drv_data->tx + transfer->len;
970         drv_data->rx = transfer->rx_buf;
971         drv_data->rx_end = drv_data->rx + transfer->len;
972         drv_data->write = drv_data->tx ? chip->write : null_writer;
973         drv_data->read = drv_data->rx ? chip->read : null_reader;
974
975         /* Change speed and bit per word on a per transfer */
976         bits = transfer->bits_per_word;
977         speed = transfer->speed_hz;
978
979         clk_div = pxa2xx_ssp_get_clk_div(drv_data, speed);
980
981         if (bits <= 8) {
982                 drv_data->n_bytes = 1;
983                 drv_data->read = drv_data->read != null_reader ?
984                                         u8_reader : null_reader;
985                 drv_data->write = drv_data->write != null_writer ?
986                                         u8_writer : null_writer;
987         } else if (bits <= 16) {
988                 drv_data->n_bytes = 2;
989                 drv_data->read = drv_data->read != null_reader ?
990                                         u16_reader : null_reader;
991                 drv_data->write = drv_data->write != null_writer ?
992                                         u16_writer : null_writer;
993         } else if (bits <= 32) {
994                 drv_data->n_bytes = 4;
995                 drv_data->read = drv_data->read != null_reader ?
996                                         u32_reader : null_reader;
997                 drv_data->write = drv_data->write != null_writer ?
998                                         u32_writer : null_writer;
999         }
1000         /*
1001          * if bits/word is changed in dma mode, then must check the
1002          * thresholds and burst also
1003          */
1004         if (chip->enable_dma) {
1005                 if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
1006                                                 spi,
1007                                                 bits, &dma_burst,
1008                                                 &dma_thresh))
1009                         dev_warn_ratelimited(&spi->dev,
1010                                              "DMA burst size reduced to match bits_per_word\n");
1011         }
1012
1013         dma_mapped = controller->can_dma &&
1014                      controller->can_dma(controller, spi, transfer) &&
1015                      controller->cur_msg_mapped;
1016         if (dma_mapped) {
1017
1018                 /* Ensure we have the correct interrupt handler */
1019                 drv_data->transfer_handler = pxa2xx_spi_dma_transfer;
1020
1021                 err = pxa2xx_spi_dma_prepare(drv_data, transfer);
1022                 if (err)
1023                         return err;
1024
1025                 /* Clear status and start DMA engine */
1026                 cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
1027                 pxa2xx_spi_write(drv_data, SSSR, drv_data->clear_sr);
1028
1029                 pxa2xx_spi_dma_start(drv_data);
1030         } else {
1031                 /* Ensure we have the correct interrupt handler */
1032                 drv_data->transfer_handler = interrupt_transfer;
1033
1034                 /* Clear status  */
1035                 cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
1036                 write_SSSR_CS(drv_data, drv_data->clear_sr);
1037         }
1038
1039         /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
1040         cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
1041         if (!pxa25x_ssp_comp(drv_data))
1042                 dev_dbg(&spi->dev, "%u Hz actual, %s\n",
1043                         controller->max_speed_hz
1044                                 / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
1045                         dma_mapped ? "DMA" : "PIO");
1046         else
1047                 dev_dbg(&spi->dev, "%u Hz actual, %s\n",
1048                         controller->max_speed_hz / 2
1049                                 / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
1050                         dma_mapped ? "DMA" : "PIO");
1051
1052         if (is_lpss_ssp(drv_data)) {
1053                 if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff)
1054                     != chip->lpss_rx_threshold)
1055                         pxa2xx_spi_write(drv_data, SSIRF,
1056                                          chip->lpss_rx_threshold);
1057                 if ((pxa2xx_spi_read(drv_data, SSITF) & 0xffff)
1058                     != chip->lpss_tx_threshold)
1059                         pxa2xx_spi_write(drv_data, SSITF,
1060                                          chip->lpss_tx_threshold);
1061         }
1062
1063         if (is_quark_x1000_ssp(drv_data) &&
1064             (pxa2xx_spi_read(drv_data, DDS_RATE) != chip->dds_rate))
1065                 pxa2xx_spi_write(drv_data, DDS_RATE, chip->dds_rate);
1066
1067         /* see if we need to reload the config registers */
1068         if ((pxa2xx_spi_read(drv_data, SSCR0) != cr0)
1069             || (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
1070             != (cr1 & change_mask)) {
1071                 /* stop the SSP, and update the other bits */
1072                 pxa2xx_spi_write(drv_data, SSCR0, cr0 & ~SSCR0_SSE);
1073                 if (!pxa25x_ssp_comp(drv_data))
1074                         pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
1075                 /* first set CR1 without interrupt and service enables */
1076                 pxa2xx_spi_write(drv_data, SSCR1, cr1 & change_mask);
1077                 /* restart the SSP */
1078                 pxa2xx_spi_write(drv_data, SSCR0, cr0);
1079
1080         } else {
1081                 if (!pxa25x_ssp_comp(drv_data))
1082                         pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
1083         }
1084
1085         if (drv_data->ssp_type == MMP2_SSP) {
1086                 u8 tx_level = (pxa2xx_spi_read(drv_data, SSSR)
1087                                         & SSSR_TFL_MASK) >> 8;
1088
1089                 if (tx_level) {
1090                         /* On MMP2, flipping SSE doesn't to empty TXFIFO. */
1091                         dev_warn(&spi->dev, "%d bytes of garbage in TXFIFO!\n",
1092                                                                 tx_level);
1093                         if (tx_level > transfer->len)
1094                                 tx_level = transfer->len;
1095                         drv_data->tx += tx_level;
1096                 }
1097         }
1098
1099         if (spi_controller_is_slave(controller)) {
1100                 while (drv_data->write(drv_data))
1101                         ;
1102                 if (drv_data->gpiod_ready) {
1103                         gpiod_set_value(drv_data->gpiod_ready, 1);
1104                         udelay(1);
1105                         gpiod_set_value(drv_data->gpiod_ready, 0);
1106                 }
1107         }
1108
1109         /*
1110          * Release the data by enabling service requests and interrupts,
1111          * without changing any mode bits
1112          */
1113         pxa2xx_spi_write(drv_data, SSCR1, cr1);
1114
1115         return 1;
1116 }
1117
1118 static int pxa2xx_spi_slave_abort(struct spi_controller *controller)
1119 {
1120         struct driver_data *drv_data = spi_controller_get_devdata(controller);
1121
1122         /* Stop and reset SSP */
1123         write_SSSR_CS(drv_data, drv_data->clear_sr);
1124         reset_sccr1(drv_data);
1125         if (!pxa25x_ssp_comp(drv_data))
1126                 pxa2xx_spi_write(drv_data, SSTO, 0);
1127         pxa2xx_spi_flush(drv_data);
1128         pxa2xx_spi_write(drv_data, SSCR0,
1129                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1130
1131         dev_dbg(&drv_data->pdev->dev, "transfer aborted\n");
1132
1133         drv_data->controller->cur_msg->status = -EINTR;
1134         spi_finalize_current_transfer(drv_data->controller);
1135
1136         return 0;
1137 }
1138
1139 static void pxa2xx_spi_handle_err(struct spi_controller *controller,
1140                                  struct spi_message *msg)
1141 {
1142         struct driver_data *drv_data = spi_controller_get_devdata(controller);
1143
1144         /* Disable the SSP */
1145         pxa2xx_spi_write(drv_data, SSCR0,
1146                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1147         /* Clear and disable interrupts and service requests */
1148         write_SSSR_CS(drv_data, drv_data->clear_sr);
1149         pxa2xx_spi_write(drv_data, SSCR1,
1150                          pxa2xx_spi_read(drv_data, SSCR1)
1151                          & ~(drv_data->int_cr1 | drv_data->dma_cr1));
1152         if (!pxa25x_ssp_comp(drv_data))
1153                 pxa2xx_spi_write(drv_data, SSTO, 0);
1154
1155         /*
1156          * Stop the DMA if running. Note DMA callback handler may have unset
1157          * the dma_running already, which is fine as stopping is not needed
1158          * then but we shouldn't rely this flag for anything else than
1159          * stopping. For instance to differentiate between PIO and DMA
1160          * transfers.
1161          */
1162         if (atomic_read(&drv_data->dma_running))
1163                 pxa2xx_spi_dma_stop(drv_data);
1164 }
1165
1166 static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller)
1167 {
1168         struct driver_data *drv_data = spi_controller_get_devdata(controller);
1169
1170         /* Disable the SSP now */
1171         pxa2xx_spi_write(drv_data, SSCR0,
1172                          pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
1173
1174         return 0;
1175 }
1176
1177 static int setup_cs(struct spi_device *spi, struct chip_data *chip,
1178                     struct pxa2xx_spi_chip *chip_info)
1179 {
1180         struct driver_data *drv_data =
1181                 spi_controller_get_devdata(spi->controller);
1182         struct gpio_desc *gpiod;
1183         int err = 0;
1184
1185         if (chip == NULL)
1186                 return 0;
1187
1188         if (drv_data->cs_gpiods) {
1189                 gpiod = drv_data->cs_gpiods[spi->chip_select];
1190                 if (gpiod) {
1191                         chip->gpiod_cs = gpiod;
1192                         chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
1193                         gpiod_set_value(gpiod, chip->gpio_cs_inverted);
1194                 }
1195
1196                 return 0;
1197         }
1198
1199         if (chip_info == NULL)
1200                 return 0;
1201
1202         /* NOTE: setup() can be called multiple times, possibly with
1203          * different chip_info, release previously requested GPIO
1204          */
1205         if (chip->gpiod_cs) {
1206                 gpiod_put(chip->gpiod_cs);
1207                 chip->gpiod_cs = NULL;
1208         }
1209
1210         /* If (*cs_control) is provided, ignore GPIO chip select */
1211         if (chip_info->cs_control) {
1212                 chip->cs_control = chip_info->cs_control;
1213                 return 0;
1214         }
1215
1216         if (gpio_is_valid(chip_info->gpio_cs)) {
1217                 err = gpio_request(chip_info->gpio_cs, "SPI_CS");
1218                 if (err) {
1219                         dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
1220                                 chip_info->gpio_cs);
1221                         return err;
1222                 }
1223
1224                 gpiod = gpio_to_desc(chip_info->gpio_cs);
1225                 chip->gpiod_cs = gpiod;
1226                 chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
1227
1228                 err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted);
1229         }
1230
1231         return err;
1232 }
1233
1234 static int setup(struct spi_device *spi)
1235 {
1236         struct pxa2xx_spi_chip *chip_info;
1237         struct chip_data *chip;
1238         const struct lpss_config *config;
1239         struct driver_data *drv_data =
1240                 spi_controller_get_devdata(spi->controller);
1241         uint tx_thres, tx_hi_thres, rx_thres;
1242
1243         switch (drv_data->ssp_type) {
1244         case QUARK_X1000_SSP:
1245                 tx_thres = TX_THRESH_QUARK_X1000_DFLT;
1246                 tx_hi_thres = 0;
1247                 rx_thres = RX_THRESH_QUARK_X1000_DFLT;
1248                 break;
1249         case CE4100_SSP:
1250                 tx_thres = TX_THRESH_CE4100_DFLT;
1251                 tx_hi_thres = 0;
1252                 rx_thres = RX_THRESH_CE4100_DFLT;
1253                 break;
1254         case LPSS_LPT_SSP:
1255         case LPSS_BYT_SSP:
1256         case LPSS_BSW_SSP:
1257         case LPSS_SPT_SSP:
1258         case LPSS_BXT_SSP:
1259         case LPSS_CNL_SSP:
1260                 config = lpss_get_config(drv_data);
1261                 tx_thres = config->tx_threshold_lo;
1262                 tx_hi_thres = config->tx_threshold_hi;
1263                 rx_thres = config->rx_threshold;
1264                 break;
1265         default:
1266                 tx_hi_thres = 0;
1267                 if (spi_controller_is_slave(drv_data->controller)) {
1268                         tx_thres = 1;
1269                         rx_thres = 2;
1270                 } else {
1271                         tx_thres = TX_THRESH_DFLT;
1272                         rx_thres = RX_THRESH_DFLT;
1273                 }
1274                 break;
1275         }
1276
1277         /* Only alloc on first setup */
1278         chip = spi_get_ctldata(spi);
1279         if (!chip) {
1280                 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1281                 if (!chip)
1282                         return -ENOMEM;
1283
1284                 if (drv_data->ssp_type == CE4100_SSP) {
1285                         if (spi->chip_select > 4) {
1286                                 dev_err(&spi->dev,
1287                                         "failed setup: cs number must not be > 4.\n");
1288                                 kfree(chip);
1289                                 return -EINVAL;
1290                         }
1291
1292                         chip->frm = spi->chip_select;
1293                 }
1294                 chip->enable_dma = drv_data->controller_info->enable_dma;
1295                 chip->timeout = TIMOUT_DFLT;
1296         }
1297
1298         /* protocol drivers may change the chip settings, so...
1299          * if chip_info exists, use it */
1300         chip_info = spi->controller_data;
1301
1302         /* chip_info isn't always needed */
1303         chip->cr1 = 0;
1304         if (chip_info) {
1305                 if (chip_info->timeout)
1306                         chip->timeout = chip_info->timeout;
1307                 if (chip_info->tx_threshold)
1308                         tx_thres = chip_info->tx_threshold;
1309                 if (chip_info->tx_hi_threshold)
1310                         tx_hi_thres = chip_info->tx_hi_threshold;
1311                 if (chip_info->rx_threshold)
1312                         rx_thres = chip_info->rx_threshold;
1313                 chip->dma_threshold = 0;
1314                 if (chip_info->enable_loopback)
1315                         chip->cr1 = SSCR1_LBM;
1316         }
1317         if (spi_controller_is_slave(drv_data->controller)) {
1318                 chip->cr1 |= SSCR1_SCFR;
1319                 chip->cr1 |= SSCR1_SCLKDIR;
1320                 chip->cr1 |= SSCR1_SFRMDIR;
1321                 chip->cr1 |= SSCR1_SPH;
1322         }
1323
1324         chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres);
1325         chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres)
1326                                 | SSITF_TxHiThresh(tx_hi_thres);
1327
1328         /* set dma burst and threshold outside of chip_info path so that if
1329          * chip_info goes away after setting chip->enable_dma, the
1330          * burst and threshold can still respond to changes in bits_per_word */
1331         if (chip->enable_dma) {
1332                 /* set up legal burst and threshold for dma */
1333                 if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
1334                                                 spi->bits_per_word,
1335                                                 &chip->dma_burst_size,
1336                                                 &chip->dma_threshold)) {
1337                         dev_warn(&spi->dev,
1338                                  "in setup: DMA burst size reduced to match bits_per_word\n");
1339                 }
1340                 dev_dbg(&spi->dev,
1341                         "in setup: DMA burst size set to %u\n",
1342                         chip->dma_burst_size);
1343         }
1344
1345         switch (drv_data->ssp_type) {
1346         case QUARK_X1000_SSP:
1347                 chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres)
1348                                    & QUARK_X1000_SSCR1_RFT)
1349                                    | (QUARK_X1000_SSCR1_TxTresh(tx_thres)
1350                                    & QUARK_X1000_SSCR1_TFT);
1351                 break;
1352         case CE4100_SSP:
1353                 chip->threshold = (CE4100_SSCR1_RxTresh(rx_thres) & CE4100_SSCR1_RFT) |
1354                         (CE4100_SSCR1_TxTresh(tx_thres) & CE4100_SSCR1_TFT);
1355                 break;
1356         default:
1357                 chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
1358                         (SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
1359                 break;
1360         }
1361
1362         chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
1363         chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
1364                         | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
1365
1366         if (spi->mode & SPI_LOOP)
1367                 chip->cr1 |= SSCR1_LBM;
1368
1369         if (spi->bits_per_word <= 8) {
1370                 chip->n_bytes = 1;
1371                 chip->read = u8_reader;
1372                 chip->write = u8_writer;
1373         } else if (spi->bits_per_word <= 16) {
1374                 chip->n_bytes = 2;
1375                 chip->read = u16_reader;
1376                 chip->write = u16_writer;
1377         } else if (spi->bits_per_word <= 32) {
1378                 chip->n_bytes = 4;
1379                 chip->read = u32_reader;
1380                 chip->write = u32_writer;
1381         }
1382
1383         spi_set_ctldata(spi, chip);
1384
1385         if (drv_data->ssp_type == CE4100_SSP)
1386                 return 0;
1387
1388         return setup_cs(spi, chip, chip_info);
1389 }
1390
1391 static void cleanup(struct spi_device *spi)
1392 {
1393         struct chip_data *chip = spi_get_ctldata(spi);
1394         struct driver_data *drv_data =
1395                 spi_controller_get_devdata(spi->controller);
1396
1397         if (!chip)
1398                 return;
1399
1400         if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods &&
1401             chip->gpiod_cs)
1402                 gpiod_put(chip->gpiod_cs);
1403
1404         kfree(chip);
1405 }
1406
1407 static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
1408         { "INT33C0", LPSS_LPT_SSP },
1409         { "INT33C1", LPSS_LPT_SSP },
1410         { "INT3430", LPSS_LPT_SSP },
1411         { "INT3431", LPSS_LPT_SSP },
1412         { "80860F0E", LPSS_BYT_SSP },
1413         { "8086228E", LPSS_BSW_SSP },
1414         { },
1415 };
1416 MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
1417
1418 /*
1419  * PCI IDs of compound devices that integrate both host controller and private
1420  * integrated DMA engine. Please note these are not used in module
1421  * autoloading and probing in this module but matching the LPSS SSP type.
1422  */
1423 static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
1424         /* SPT-LP */
1425         { PCI_VDEVICE(INTEL, 0x9d29), LPSS_SPT_SSP },
1426         { PCI_VDEVICE(INTEL, 0x9d2a), LPSS_SPT_SSP },
1427         /* SPT-H */
1428         { PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP },
1429         { PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP },
1430         /* KBL-H */
1431         { PCI_VDEVICE(INTEL, 0xa2a9), LPSS_SPT_SSP },
1432         { PCI_VDEVICE(INTEL, 0xa2aa), LPSS_SPT_SSP },
1433         /* BXT A-Step */
1434         { PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP },
1435         { PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP },
1436         { PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP },
1437         /* BXT B-Step */
1438         { PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
1439         { PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
1440         { PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
1441         /* GLK */
1442         { PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP },
1443         { PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP },
1444         { PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP },
1445         /* ICL-LP */
1446         { PCI_VDEVICE(INTEL, 0x34aa), LPSS_CNL_SSP },
1447         { PCI_VDEVICE(INTEL, 0x34ab), LPSS_CNL_SSP },
1448         { PCI_VDEVICE(INTEL, 0x34fb), LPSS_CNL_SSP },
1449         /* APL */
1450         { PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
1451         { PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
1452         { PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP },
1453         /* CNL-LP */
1454         { PCI_VDEVICE(INTEL, 0x9daa), LPSS_CNL_SSP },
1455         { PCI_VDEVICE(INTEL, 0x9dab), LPSS_CNL_SSP },
1456         { PCI_VDEVICE(INTEL, 0x9dfb), LPSS_CNL_SSP },
1457         /* CNL-H */
1458         { PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP },
1459         { PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP },
1460         { PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP },
1461         /* CML-LP */
1462         { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP },
1463         { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP },
1464         { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP },
1465         { },
1466 };
1467
1468 static const struct of_device_id pxa2xx_spi_of_match[] = {
1469         { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP },
1470         {},
1471 };
1472 MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match);
1473
1474 #ifdef CONFIG_ACPI
1475
1476 static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
1477 {
1478         unsigned int devid;
1479         int port_id = -1;
1480
1481         if (adev && adev->pnp.unique_id &&
1482             !kstrtouint(adev->pnp.unique_id, 0, &devid))
1483                 port_id = devid;
1484         return port_id;
1485 }
1486
1487 #else /* !CONFIG_ACPI */
1488
1489 static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
1490 {
1491         return -1;
1492 }
1493
1494 #endif /* CONFIG_ACPI */
1495
1496
1497 #ifdef CONFIG_PCI
1498
1499 static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
1500 {
1501         return param == chan->device->dev;
1502 }
1503
1504 #endif /* CONFIG_PCI */
1505
1506 static struct pxa2xx_spi_controller *
1507 pxa2xx_spi_init_pdata(struct platform_device *pdev)
1508 {
1509         struct pxa2xx_spi_controller *pdata;
1510         struct acpi_device *adev;
1511         struct ssp_device *ssp;
1512         struct resource *res;
1513         const struct acpi_device_id *adev_id = NULL;
1514         const struct pci_device_id *pcidev_id = NULL;
1515         const struct of_device_id *of_id = NULL;
1516         enum pxa_ssp_type type;
1517
1518         adev = ACPI_COMPANION(&pdev->dev);
1519
1520         if (pdev->dev.of_node)
1521                 of_id = of_match_device(pdev->dev.driver->of_match_table,
1522                                         &pdev->dev);
1523         else if (dev_is_pci(pdev->dev.parent))
1524                 pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match,
1525                                          to_pci_dev(pdev->dev.parent));
1526         else if (adev)
1527                 adev_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
1528                                             &pdev->dev);
1529         else
1530                 return NULL;
1531
1532         if (adev_id)
1533                 type = (enum pxa_ssp_type)adev_id->driver_data;
1534         else if (pcidev_id)
1535                 type = (enum pxa_ssp_type)pcidev_id->driver_data;
1536         else if (of_id)
1537                 type = (enum pxa_ssp_type)of_id->data;
1538         else
1539                 return NULL;
1540
1541         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1542         if (!pdata)
1543                 return NULL;
1544
1545         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1546         if (!res)
1547                 return NULL;
1548
1549         ssp = &pdata->ssp;
1550
1551         ssp->phys_base = res->start;
1552         ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res);
1553         if (IS_ERR(ssp->mmio_base))
1554                 return NULL;
1555
1556 #ifdef CONFIG_PCI
1557         if (pcidev_id) {
1558                 pdata->tx_param = pdev->dev.parent;
1559                 pdata->rx_param = pdev->dev.parent;
1560                 pdata->dma_filter = pxa2xx_spi_idma_filter;
1561         }
1562 #endif
1563
1564         ssp->clk = devm_clk_get(&pdev->dev, NULL);
1565         ssp->irq = platform_get_irq(pdev, 0);
1566         ssp->type = type;
1567         ssp->pdev = pdev;
1568         ssp->port_id = pxa2xx_spi_get_port_id(adev);
1569
1570         pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
1571         pdata->num_chipselect = 1;
1572         pdata->enable_dma = true;
1573         pdata->dma_burst_size = 1;
1574
1575         return pdata;
1576 }
1577
1578 static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller,
1579                                       unsigned int cs)
1580 {
1581         struct driver_data *drv_data = spi_controller_get_devdata(controller);
1582
1583         if (has_acpi_companion(&drv_data->pdev->dev)) {
1584                 switch (drv_data->ssp_type) {
1585                 /*
1586                  * For Atoms the ACPI DeviceSelection used by the Windows
1587                  * driver starts from 1 instead of 0 so translate it here
1588                  * to match what Linux expects.
1589                  */
1590                 case LPSS_BYT_SSP:
1591                 case LPSS_BSW_SSP:
1592                         return cs - 1;
1593
1594                 default:
1595                         break;
1596                 }
1597         }
1598
1599         return cs;
1600 }
1601
1602 static int pxa2xx_spi_probe(struct platform_device *pdev)
1603 {
1604         struct device *dev = &pdev->dev;
1605         struct pxa2xx_spi_controller *platform_info;
1606         struct spi_controller *controller;
1607         struct driver_data *drv_data;
1608         struct ssp_device *ssp;
1609         const struct lpss_config *config;
1610         int status, count;
1611         u32 tmp;
1612
1613         platform_info = dev_get_platdata(dev);
1614         if (!platform_info) {
1615                 platform_info = pxa2xx_spi_init_pdata(pdev);
1616                 if (!platform_info) {
1617                         dev_err(&pdev->dev, "missing platform data\n");
1618                         return -ENODEV;
1619                 }
1620         }
1621
1622         ssp = pxa_ssp_request(pdev->id, pdev->name);
1623         if (!ssp)
1624                 ssp = &platform_info->ssp;
1625
1626         if (!ssp->mmio_base) {
1627                 dev_err(&pdev->dev, "failed to get ssp\n");
1628                 return -ENODEV;
1629         }
1630
1631         if (platform_info->is_slave)
1632                 controller = spi_alloc_slave(dev, sizeof(struct driver_data));
1633         else
1634                 controller = spi_alloc_master(dev, sizeof(struct driver_data));
1635
1636         if (!controller) {
1637                 dev_err(&pdev->dev, "cannot alloc spi_controller\n");
1638                 pxa_ssp_free(ssp);
1639                 return -ENOMEM;
1640         }
1641         drv_data = spi_controller_get_devdata(controller);
1642         drv_data->controller = controller;
1643         drv_data->controller_info = platform_info;
1644         drv_data->pdev = pdev;
1645         drv_data->ssp = ssp;
1646
1647         controller->dev.of_node = pdev->dev.of_node;
1648         /* the spi->mode bits understood by this driver: */
1649         controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
1650
1651         controller->bus_num = ssp->port_id;
1652         controller->dma_alignment = DMA_ALIGNMENT;
1653         controller->cleanup = cleanup;
1654         controller->setup = setup;
1655         controller->set_cs = pxa2xx_spi_set_cs;
1656         controller->transfer_one = pxa2xx_spi_transfer_one;
1657         controller->slave_abort = pxa2xx_spi_slave_abort;
1658         controller->handle_err = pxa2xx_spi_handle_err;
1659         controller->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
1660         controller->fw_translate_cs = pxa2xx_spi_fw_translate_cs;
1661         controller->auto_runtime_pm = true;
1662         controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
1663
1664         drv_data->ssp_type = ssp->type;
1665
1666         drv_data->ioaddr = ssp->mmio_base;
1667         drv_data->ssdr_physical = ssp->phys_base + SSDR;
1668         if (pxa25x_ssp_comp(drv_data)) {
1669                 switch (drv_data->ssp_type) {
1670                 case QUARK_X1000_SSP:
1671                         controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
1672                         break;
1673                 default:
1674                         controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
1675                         break;
1676                 }
1677
1678                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
1679                 drv_data->dma_cr1 = 0;
1680                 drv_data->clear_sr = SSSR_ROR;
1681                 drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
1682         } else {
1683                 controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
1684                 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
1685                 drv_data->dma_cr1 = DEFAULT_DMA_CR1;
1686                 drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
1687                 drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS
1688                                                 | SSSR_ROR | SSSR_TUR;
1689         }
1690
1691         status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
1692                         drv_data);
1693         if (status < 0) {
1694                 dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
1695                 goto out_error_controller_alloc;
1696         }
1697
1698         /* Setup DMA if requested */
1699         if (platform_info->enable_dma) {
1700                 status = pxa2xx_spi_dma_setup(drv_data);
1701                 if (status) {
1702                         dev_warn(dev, "no DMA channels available, using PIO\n");
1703                         platform_info->enable_dma = false;
1704                 } else {
1705                         controller->can_dma = pxa2xx_spi_can_dma;
1706                         controller->max_dma_len = MAX_DMA_LEN;
1707                 }
1708         }
1709
1710         /* Enable SOC clock */
1711         status = clk_prepare_enable(ssp->clk);
1712         if (status)
1713                 goto out_error_dma_irq_alloc;
1714
1715         controller->max_speed_hz = clk_get_rate(ssp->clk);
1716
1717         /* Load default SSP configuration */
1718         pxa2xx_spi_write(drv_data, SSCR0, 0);
1719         switch (drv_data->ssp_type) {
1720         case QUARK_X1000_SSP:
1721                 tmp = QUARK_X1000_SSCR1_RxTresh(RX_THRESH_QUARK_X1000_DFLT) |
1722                       QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT);
1723                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1724
1725                 /* using the Motorola SPI protocol and use 8 bit frame */
1726                 tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8);
1727                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1728                 break;
1729         case CE4100_SSP:
1730                 tmp = CE4100_SSCR1_RxTresh(RX_THRESH_CE4100_DFLT) |
1731                       CE4100_SSCR1_TxTresh(TX_THRESH_CE4100_DFLT);
1732                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1733                 tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8);
1734                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1735                 break;
1736         default:
1737
1738                 if (spi_controller_is_slave(controller)) {
1739                         tmp = SSCR1_SCFR |
1740                               SSCR1_SCLKDIR |
1741                               SSCR1_SFRMDIR |
1742                               SSCR1_RxTresh(2) |
1743                               SSCR1_TxTresh(1) |
1744                               SSCR1_SPH;
1745                 } else {
1746                         tmp = SSCR1_RxTresh(RX_THRESH_DFLT) |
1747                               SSCR1_TxTresh(TX_THRESH_DFLT);
1748                 }
1749                 pxa2xx_spi_write(drv_data, SSCR1, tmp);
1750                 tmp = SSCR0_Motorola | SSCR0_DataSize(8);
1751                 if (!spi_controller_is_slave(controller))
1752                         tmp |= SSCR0_SCR(2);
1753                 pxa2xx_spi_write(drv_data, SSCR0, tmp);
1754                 break;
1755         }
1756
1757         if (!pxa25x_ssp_comp(drv_data))
1758                 pxa2xx_spi_write(drv_data, SSTO, 0);
1759
1760         if (!is_quark_x1000_ssp(drv_data))
1761                 pxa2xx_spi_write(drv_data, SSPSP, 0);
1762
1763         if (is_lpss_ssp(drv_data)) {
1764                 lpss_ssp_setup(drv_data);
1765                 config = lpss_get_config(drv_data);
1766                 if (config->reg_capabilities >= 0) {
1767                         tmp = __lpss_ssp_read_priv(drv_data,
1768                                                    config->reg_capabilities);
1769                         tmp &= LPSS_CAPS_CS_EN_MASK;
1770                         tmp >>= LPSS_CAPS_CS_EN_SHIFT;
1771                         platform_info->num_chipselect = ffz(tmp);
1772                 } else if (config->cs_num) {
1773                         platform_info->num_chipselect = config->cs_num;
1774                 }
1775         }
1776         controller->num_chipselect = platform_info->num_chipselect;
1777
1778         count = gpiod_count(&pdev->dev, "cs");
1779         if (count > 0) {
1780                 int i;
1781
1782                 controller->num_chipselect = max_t(int, count,
1783                         controller->num_chipselect);
1784
1785                 drv_data->cs_gpiods = devm_kcalloc(&pdev->dev,
1786                         controller->num_chipselect, sizeof(struct gpio_desc *),
1787                         GFP_KERNEL);
1788                 if (!drv_data->cs_gpiods) {
1789                         status = -ENOMEM;
1790                         goto out_error_clock_enabled;
1791                 }
1792
1793                 for (i = 0; i < controller->num_chipselect; i++) {
1794                         struct gpio_desc *gpiod;
1795
1796                         gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS);
1797                         if (IS_ERR(gpiod)) {
1798                                 /* Means use native chip select */
1799                                 if (PTR_ERR(gpiod) == -ENOENT)
1800                                         continue;
1801
1802                                 status = PTR_ERR(gpiod);
1803                                 goto out_error_clock_enabled;
1804                         } else {
1805                                 drv_data->cs_gpiods[i] = gpiod;
1806                         }
1807                 }
1808         }
1809
1810         if (platform_info->is_slave) {
1811                 drv_data->gpiod_ready = devm_gpiod_get_optional(dev,
1812                                                 "ready", GPIOD_OUT_LOW);
1813                 if (IS_ERR(drv_data->gpiod_ready)) {
1814                         status = PTR_ERR(drv_data->gpiod_ready);
1815                         goto out_error_clock_enabled;
1816                 }
1817         }
1818
1819         pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
1820         pm_runtime_use_autosuspend(&pdev->dev);
1821         pm_runtime_set_active(&pdev->dev);
1822         pm_runtime_enable(&pdev->dev);
1823
1824         /* Register with the SPI framework */
1825         platform_set_drvdata(pdev, drv_data);
1826         status = devm_spi_register_controller(&pdev->dev, controller);
1827         if (status != 0) {
1828                 dev_err(&pdev->dev, "problem registering spi controller\n");
1829                 goto out_error_clock_enabled;
1830         }
1831
1832         return status;
1833
1834 out_error_clock_enabled:
1835         pm_runtime_put_noidle(&pdev->dev);
1836         pm_runtime_disable(&pdev->dev);
1837         clk_disable_unprepare(ssp->clk);
1838
1839 out_error_dma_irq_alloc:
1840         pxa2xx_spi_dma_release(drv_data);
1841         free_irq(ssp->irq, drv_data);
1842
1843 out_error_controller_alloc:
1844         spi_controller_put(controller);
1845         pxa_ssp_free(ssp);
1846         return status;
1847 }
1848
1849 static int pxa2xx_spi_remove(struct platform_device *pdev)
1850 {
1851         struct driver_data *drv_data = platform_get_drvdata(pdev);
1852         struct ssp_device *ssp;
1853
1854         if (!drv_data)
1855                 return 0;
1856         ssp = drv_data->ssp;
1857
1858         pm_runtime_get_sync(&pdev->dev);
1859
1860         /* Disable the SSP at the peripheral and SOC level */
1861         pxa2xx_spi_write(drv_data, SSCR0, 0);
1862         clk_disable_unprepare(ssp->clk);
1863
1864         /* Release DMA */
1865         if (drv_data->controller_info->enable_dma)
1866                 pxa2xx_spi_dma_release(drv_data);
1867
1868         pm_runtime_put_noidle(&pdev->dev);
1869         pm_runtime_disable(&pdev->dev);
1870
1871         /* Release IRQ */
1872         free_irq(ssp->irq, drv_data);
1873
1874         /* Release SSP */
1875         pxa_ssp_free(ssp);
1876
1877         return 0;
1878 }
1879
1880 #ifdef CONFIG_PM_SLEEP
1881 static int pxa2xx_spi_suspend(struct device *dev)
1882 {
1883         struct driver_data *drv_data = dev_get_drvdata(dev);
1884         struct ssp_device *ssp = drv_data->ssp;
1885         int status;
1886
1887         status = spi_controller_suspend(drv_data->controller);
1888         if (status != 0)
1889                 return status;
1890         pxa2xx_spi_write(drv_data, SSCR0, 0);
1891
1892         if (!pm_runtime_suspended(dev))
1893                 clk_disable_unprepare(ssp->clk);
1894
1895         return 0;
1896 }
1897
1898 static int pxa2xx_spi_resume(struct device *dev)
1899 {
1900         struct driver_data *drv_data = dev_get_drvdata(dev);
1901         struct ssp_device *ssp = drv_data->ssp;
1902         int status;
1903
1904         /* Enable the SSP clock */
1905         if (!pm_runtime_suspended(dev)) {
1906                 status = clk_prepare_enable(ssp->clk);
1907                 if (status)
1908                         return status;
1909         }
1910
1911         /* Start the queue running */
1912         return spi_controller_resume(drv_data->controller);
1913 }
1914 #endif
1915
1916 #ifdef CONFIG_PM
1917 static int pxa2xx_spi_runtime_suspend(struct device *dev)
1918 {
1919         struct driver_data *drv_data = dev_get_drvdata(dev);
1920
1921         clk_disable_unprepare(drv_data->ssp->clk);
1922         return 0;
1923 }
1924
1925 static int pxa2xx_spi_runtime_resume(struct device *dev)
1926 {
1927         struct driver_data *drv_data = dev_get_drvdata(dev);
1928         int status;
1929
1930         status = clk_prepare_enable(drv_data->ssp->clk);
1931         return status;
1932 }
1933 #endif
1934
1935 static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
1936         SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
1937         SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend,
1938                            pxa2xx_spi_runtime_resume, NULL)
1939 };
1940
1941 static struct platform_driver driver = {
1942         .driver = {
1943                 .name   = "pxa2xx-spi",
1944                 .pm     = &pxa2xx_spi_pm_ops,
1945                 .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
1946                 .of_match_table = of_match_ptr(pxa2xx_spi_of_match),
1947         },
1948         .probe = pxa2xx_spi_probe,
1949         .remove = pxa2xx_spi_remove,
1950 };
1951
1952 static int __init pxa2xx_spi_init(void)
1953 {
1954         return platform_driver_register(&driver);
1955 }
1956 subsys_initcall(pxa2xx_spi_init);
1957
1958 static void __exit pxa2xx_spi_exit(void)
1959 {
1960         platform_driver_unregister(&driver);
1961 }
1962 module_exit(pxa2xx_spi_exit);
1963
1964 MODULE_SOFTDEP("pre: dw_dmac");