drivers/scsi/sym53c8xx_2/sym_glue.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
   4  * of PCI-SCSI IO processors.
   5  *
   6  * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
   7  * Copyright (c) 2003-2005  Matthew Wilcox <matthew@wil.cx>
   8  *
   9  * This driver is derived from the Linux sym53c8xx driver.
  10  * Copyright (C) 1998-2000  Gerard Roudier
  11  *
  12  * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
  13  * a port of the FreeBSD ncr driver to Linux-1.2.13.
  14  *
  15  * The original ncr driver has been written for 386bsd and FreeBSD by
  16  *         Wolfgang Stanglmeier        <wolf@cologne.de>
  17  *         Stefan Esser                <se@mi.Uni-Koeln.de>
  18  * Copyright (C) 1994  Wolfgang Stanglmeier
  19  *
  20  * Other major contributions:
  21  *
  22  * NVRAM detection and reading.
  23  * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
  24  *
  25  *-----------------------------------------------------------------------------
  26  */
  27 #include <linux/ctype.h>
  28 #include <linux/init.h>
  29 #include <linux/module.h>
  30 #include <linux/moduleparam.h>
  31 #include <linux/spinlock.h>
  32 #include <scsi/scsi.h>
  33 #include <scsi/scsi_tcq.h>
  34 #include <scsi/scsi_device.h>
  35 #include <scsi/scsi_transport.h>
  36
  37 #include "sym_glue.h"
  38 #include "sym_nvram.h"
  39
  40 #define NAME53C         "sym53c"
  41 #define NAME53C8XX      "sym53c8xx"
  42
  43 struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
  44 unsigned int sym_debug_flags = 0;
  45
  46 static char *excl_string;
  47 static char *safe_string;
  48 module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
  49 module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
  50 module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
  51 module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
  52 module_param_named(irqm, sym_driver_setup.irq_mode, byte, 0);
  53 module_param_named(buschk, sym_driver_setup.scsi_bus_check, byte, 0);
  54 module_param_named(hostid, sym_driver_setup.host_id, byte, 0);
  55 module_param_named(verb, sym_driver_setup.verbose, byte, 0);
  56 module_param_named(debug, sym_debug_flags, uint, 0);
  57 module_param_named(settle, sym_driver_setup.settle_delay, byte, 0);
  58 module_param_named(nvram, sym_driver_setup.use_nvram, byte, 0);
  59 module_param_named(excl, excl_string, charp, 0);
  60 module_param_named(safe, safe_string, charp, 0);
  61
  62 MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
  63 MODULE_PARM_DESC(burst, "Maximum burst.  0 to disable, 255 to read from registers");
  64 MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
  65 MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
  66 MODULE_PARM_DESC(irqm, "0 for open drain, 1 to leave alone, 2 for totem pole");
  67 MODULE_PARM_DESC(buschk, "0 to not check, 1 for detach on error, 2 for warn on error");
  68 MODULE_PARM_DESC(hostid, "The SCSI ID to use for the host adapters");
  69 MODULE_PARM_DESC(verb, "0 for minimal verbosity, 1 for normal, 2 for excessive");
  70 MODULE_PARM_DESC(debug, "Set bits to enable debugging");
  71 MODULE_PARM_DESC(settle, "Settle delay in seconds.  Default 3");
  72 MODULE_PARM_DESC(nvram, "Option currently not used");
  73 MODULE_PARM_DESC(excl, "List ioport addresses here to prevent controllers from being attached");
  74 MODULE_PARM_DESC(safe, "Set other settings to a \"safe mode\"");
  75
  76 MODULE_LICENSE("GPL");
  77 MODULE_VERSION(SYM_VERSION);
  78 MODULE_AUTHOR("Matthew Wilcox <matthew@wil.cx>");
  79 MODULE_DESCRIPTION("NCR, Symbios and LSI 8xx and 1010 PCI SCSI adapters");
  80
  81 static void sym2_setup_params(void)
  82 {
  83         char *p = excl_string;
  84         int xi = 0;
  85
  86         while (p && (xi < 8)) {
  87                 char *next_p;
  88                 int val = (int) simple_strtoul(p, &next_p, 0);
  89                 sym_driver_setup.excludes[xi++] = val;
  90                 p = next_p;
  91         }
  92
  93         if (safe_string) {
  94                 if (*safe_string == 'y') {
  95                         sym_driver_setup.max_tag = 0;
  96                         sym_driver_setup.burst_order = 0;
  97                         sym_driver_setup.scsi_led = 0;
  98                         sym_driver_setup.scsi_diff = 1;
  99                         sym_driver_setup.irq_mode = 0;
 100                         sym_driver_setup.scsi_bus_check = 2;
 101                         sym_driver_setup.host_id = 7;
 102                         sym_driver_setup.verbose = 2;
 103                         sym_driver_setup.settle_delay = 10;
 104                         sym_driver_setup.use_nvram = 1;
 105                 } else if (*safe_string != 'n') {
 106                         printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s"
 107                                         " passed to safe option", safe_string);
 108                 }
 109         }
 110 }
 111
 112 static struct scsi_transport_template *sym2_transport_template = NULL;
 113
 114 /*
 115  *  Driver private area in the SCSI command structure.
 116  */
 117 struct sym_ucmd {               /* Override the SCSI pointer structure */
 118         struct completion *eh_done;             /* SCSI error handling */
 119 };
 120
 121 #define SYM_UCMD_PTR(cmd)  ((struct sym_ucmd *)(&(cmd)->SCp))
 122 #define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host)
 123
 124 /*
 125  *  Complete a pending CAM CCB.
 126  */
 127 void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd)
 128 {
 129         struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd);
 130         BUILD_BUG_ON(sizeof(struct scsi_pointer) < sizeof(struct sym_ucmd));
 131
 132         if (ucmd->eh_done)
 133                 complete(ucmd->eh_done);
 134
 135         scsi_dma_unmap(cmd);
 136         cmd->scsi_done(cmd);
 137 }
 138
 139 /*
 140  *  Tell the SCSI layer about a BUS RESET.
 141  */
 142 void sym_xpt_async_bus_reset(struct sym_hcb *np)
 143 {
 144         printf_notice("%s: SCSI BUS has been reset.\n", sym_name(np));
 145         np->s.settle_time = jiffies + sym_driver_setup.settle_delay * HZ;
 146         np->s.settle_time_valid = 1;
 147         if (sym_verbose >= 2)
 148                 printf_info("%s: command processing suspended for %d seconds\n",
 149                             sym_name(np), sym_driver_setup.settle_delay);
 150 }
 151
 152 /*
 153  *  Choose the more appropriate CAM status if
 154  *  the IO encountered an extended error.
 155  */
 156 static int sym_xerr_cam_status(int cam_status, int x_status)
 157 {
 158         if (x_status) {
 159                 if      (x_status & XE_PARITY_ERR)
 160                         cam_status = DID_PARITY;
 161                 else if (x_status &(XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN))
 162                         cam_status = DID_ERROR;
 163                 else if (x_status & XE_BAD_PHASE)
 164                         cam_status = DID_ERROR;
 165                 else
 166                         cam_status = DID_ERROR;
 167         }
 168         return cam_status;
 169 }
 170
 171 /*
 172  *  Build CAM result for a failed or auto-sensed IO.
 173  */
 174 void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
 175 {
 176         struct scsi_cmnd *cmd = cp->cmd;
 177         u_int cam_status, scsi_status, drv_status;
 178
 179         drv_status  = 0;
 180         cam_status  = DID_OK;
 181         scsi_status = cp->ssss_status;
 182
 183         if (cp->host_flags & HF_SENSE) {
 184                 scsi_status = cp->sv_scsi_status;
 185                 resid = cp->sv_resid;
 186                 if (sym_verbose && cp->sv_xerr_status)
 187                         sym_print_xerr(cmd, cp->sv_xerr_status);
 188                 if (cp->host_status == HS_COMPLETE &&
 189                     cp->ssss_status == S_GOOD &&
 190                     cp->xerr_status == 0) {
 191                         cam_status = sym_xerr_cam_status(DID_OK,
 192                                                          cp->sv_xerr_status);
 193                         drv_status = DRIVER_SENSE;
 194                         /*
 195                          *  Bounce back the sense data to user.
 196                          */
 197                         memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 198                         memcpy(cmd->sense_buffer, cp->sns_bbuf,
 199                                min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN));
 200 #if 0
 201                         /*
 202                          *  If the device reports a UNIT ATTENTION condition
 203                          *  due to a RESET condition, we should consider all
 204                          *  disconnect CCBs for this unit as aborted.
 205                          */
 206                         if (1) {
 207                                 u_char *p;
 208                                 p  = (u_char *) cmd->sense_data;
 209                                 if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29)
 210                                         sym_clear_tasks(np, DID_ABORT,
 211                                                         cp->target,cp->lun, -1);
 212                         }
 213 #endif
 214                 } else {
 215                         /*
 216                          * Error return from our internal request sense.  This
 217                          * is bad: we must clear the contingent allegiance
 218                          * condition otherwise the device will always return
 219                          * BUSY.  Use a big stick.
 220                          */
 221                         sym_reset_scsi_target(np, cmd->device->id);
 222                         cam_status = DID_ERROR;
 223                 }
 224         } else if (cp->host_status == HS_COMPLETE)      /* Bad SCSI status */
 225                 cam_status = DID_OK;
 226         else if (cp->host_status == HS_SEL_TIMEOUT)     /* Selection timeout */
 227                 cam_status = DID_NO_CONNECT;
 228         else if (cp->host_status == HS_UNEXPECTED)      /* Unexpected BUS FREE*/
 229                 cam_status = DID_ERROR;
 230         else {                                          /* Extended error */
 231                 if (sym_verbose) {
 232                         sym_print_addr(cmd, "COMMAND FAILED (%x %x %x).\n",
 233                                 cp->host_status, cp->ssss_status,
 234                                 cp->xerr_status);
 235                 }
 236                 /*
 237                  *  Set the most appropriate value for CAM status.
 238                  */
 239                 cam_status = sym_xerr_cam_status(DID_ERROR, cp->xerr_status);
 240         }
 241         scsi_set_resid(cmd, resid);
 242         cmd->result = (drv_status << 24) | (cam_status << 16) | scsi_status;
 243 }
 244
 245 static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd)
 246 {
 247         int segment;
 248         int use_sg;
 249
 250         cp->data_len = 0;
 251
 252         use_sg = scsi_dma_map(cmd);
 253         if (use_sg > 0) {
 254                 struct scatterlist *sg;
 255                 struct sym_tcb *tp = &np->target[cp->target];
 256                 struct sym_tblmove *data;
 257
 258                 if (use_sg > SYM_CONF_MAX_SG) {
 259                         scsi_dma_unmap(cmd);
 260                         return -1;
 261                 }
 262
 263                 data = &cp->phys.data[SYM_CONF_MAX_SG - use_sg];
 264
 265                 scsi_for_each_sg(cmd, sg, use_sg, segment) {
 266                         dma_addr_t baddr = sg_dma_address(sg);
 267                         unsigned int len = sg_dma_len(sg);
 268
 269                         if ((len & 1) && (tp->head.wval & EWS)) {
 270                                 len++;
 271                                 cp->odd_byte_adjustment++;
 272                         }
 273
 274                         sym_build_sge(np, &data[segment], baddr, len);
 275                         cp->data_len += len;
 276                 }
 277         } else {
 278                 segment = -2;
 279         }
 280
 281         return segment;
 282 }
 283
 284 /*
 285  *  Queue a SCSI command.
 286  */
 287 static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
 288 {
 289         struct scsi_device *sdev = cmd->device;
 290         struct sym_tcb *tp;
 291         struct sym_lcb *lp;
 292         struct sym_ccb *cp;
 293         int     order;
 294
 295         /*
 296          *  Retrieve the target descriptor.
 297          */
 298         tp = &np->target[sdev->id];
 299
 300         /*
 301          *  Select tagged/untagged.
 302          */
 303         lp = sym_lp(tp, sdev->lun);
 304         order = (lp && lp->s.reqtags) ? M_SIMPLE_TAG : 0;
 305
 306         /*
 307          *  Queue the SCSI IO.
 308          */
 309         cp = sym_get_ccb(np, cmd, order);
 310         if (!cp)
 311                 return 1;       /* Means resource shortage */
 312         sym_queue_scsiio(np, cmd, cp);
 313         return 0;
 314 }
 315
 316 /*
 317  *  Setup buffers and pointers that address the CDB.
 318  */
 319 static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
 320 {
 321         memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
 322
 323         cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]);
 324         cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len);
 325
 326         return 0;
 327 }
 328
 329 /*
 330  *  Setup pointers that address the data and start the I/O.
 331  */
 332 int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
 333 {
 334         u32 lastp, goalp;
 335         int dir;
 336
 337         /*
 338          *  Build the CDB.
 339          */
 340         if (sym_setup_cdb(np, cmd, cp))
 341                 goto out_abort;
 342
 343         /*
 344          *  No direction means no data.
 345          */
 346         dir = cmd->sc_data_direction;
 347         if (dir != DMA_NONE) {
 348                 cp->segments = sym_scatter(np, cp, cmd);
 349                 if (cp->segments < 0) {
 350                         sym_set_cam_status(cmd, DID_ERROR);
 351                         goto out_abort;
 352                 }
 353
 354                 /*
 355                  *  No segments means no data.
 356                  */
 357                 if (!cp->segments)
 358                         dir = DMA_NONE;
 359         } else {
 360                 cp->data_len = 0;
 361                 cp->segments = 0;
 362         }
 363
 364         /*
 365          *  Set the data pointer.
 366          */
 367         switch (dir) {
 368         case DMA_BIDIRECTIONAL:
 369                 scmd_printk(KERN_INFO, cmd, "got DMA_BIDIRECTIONAL command");
 370                 sym_set_cam_status(cmd, DID_ERROR);
 371                 goto out_abort;
 372         case DMA_TO_DEVICE:
 373                 goalp = SCRIPTA_BA(np, data_out2) + 8;
 374                 lastp = goalp - 8 - (cp->segments * (2*4));
 375                 break;
 376         case DMA_FROM_DEVICE:
 377                 cp->host_flags |= HF_DATA_IN;
 378                 goalp = SCRIPTA_BA(np, data_in2) + 8;
 379                 lastp = goalp - 8 - (cp->segments * (2*4));
 380                 break;
 381         case DMA_NONE:
 382         default:
 383                 lastp = goalp = SCRIPTB_BA(np, no_data);
 384                 break;
 385         }
 386
 387         /*
 388          *  Set all pointers values needed by SCRIPTS.
 389          */
 390         cp->phys.head.lastp = cpu_to_scr(lastp);
 391         cp->phys.head.savep = cpu_to_scr(lastp);
 392         cp->startp          = cp->phys.head.savep;
 393         cp->goalp           = cpu_to_scr(goalp);
 394
 395         /*
 396          *  When `#ifed 1', the code below makes the driver
 397          *  panic on the first attempt to write to a SCSI device.
 398          *  It is the first test we want to do after a driver
 399          *  change that does not seem obviously safe. :)
 400          */
 401 #if 0
 402         switch (cp->cdb_buf[0]) {
 403         case 0x0A: case 0x2A: case 0xAA:
 404                 panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n");
 405                 break;
 406         default:
 407                 break;
 408         }
 409 #endif
 410
 411         /*
 412          *      activate this job.
 413          */
 414         sym_put_start_queue(np, cp);
 415         return 0;
 416
 417 out_abort:
 418         sym_free_ccb(np, cp);
 419         sym_xpt_done(np, cmd);
 420         return 0;
 421 }
 422
 423
 424 /*
 425  *  timer daemon.
 426  *
 427  *  Misused to keep the driver running when
 428  *  interrupts are not configured correctly.
 429  */
 430 static void sym_timer(struct sym_hcb *np)
 431 {
 432         unsigned long thistime = jiffies;
 433
 434         /*
 435          *  Restart the timer.
 436          */
 437         np->s.timer.expires = thistime + SYM_CONF_TIMER_INTERVAL;
 438         add_timer(&np->s.timer);
 439
 440         /*
 441          *  If we are resetting the ncr, wait for settle_time before
 442          *  clearing it. Then command processing will be resumed.
 443          */
 444         if (np->s.settle_time_valid) {
 445                 if (time_before_eq(np->s.settle_time, thistime)) {
 446                         if (sym_verbose >= 2 )
 447                                 printk("%s: command processing resumed\n",
 448                                        sym_name(np));
 449                         np->s.settle_time_valid = 0;
 450                 }
 451                 return;
 452         }
 453
 454         /*
 455          *      Nothing to do for now, but that may come.
 456          */
 457         if (np->s.lasttime + 4*HZ < thistime) {
 458                 np->s.lasttime = thistime;
 459         }
 460
 461 #ifdef SYM_CONF_PCIQ_MAY_MISS_COMPLETIONS
 462         /*
 463          *  Some way-broken PCI bridges may lead to
 464          *  completions being lost when the clearing
 465          *  of the INTFLY flag by the CPU occurs
 466          *  concurrently with the chip raising this flag.
 467          *  If this ever happen, lost completions will
 468          * be reaped here.
 469          */
 470         sym_wakeup_done(np);
 471 #endif
 472 }
 473
 474
 475 /*
 476  *  PCI BUS error handler.
 477  */
 478 void sym_log_bus_error(struct Scsi_Host *shost)
 479 {
 480         struct sym_data *sym_data = shost_priv(shost);
 481         struct pci_dev *pdev = sym_data->pdev;
 482         unsigned short pci_sts;
 483         pci_read_config_word(pdev, PCI_STATUS, &pci_sts);
 484         if (pci_sts & 0xf900) {
 485                 pci_write_config_word(pdev, PCI_STATUS, pci_sts);
 486                 shost_printk(KERN_WARNING, shost,
 487                         "PCI bus error: status = 0x%04x\n", pci_sts & 0xf900);
 488         }
 489 }
 490
 491 /*
 492  * queuecommand method.  Entered with the host adapter lock held and
 493  * interrupts disabled.
 494  */
 495 static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd,
 496                                         void (*done)(struct scsi_cmnd *))
 497 {
 498         struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
 499         struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd);
 500         int sts = 0;
 501
 502         cmd->scsi_done = done;
 503         memset(ucp, 0, sizeof(*ucp));
 504
 505         /*
 506          *  Shorten our settle_time if needed for
 507          *  this command not to time out.
 508          */
 509         if (np->s.settle_time_valid && cmd->request->timeout) {
 510                 unsigned long tlimit = jiffies + cmd->request->timeout;
 511                 tlimit -= SYM_CONF_TIMER_INTERVAL*2;
 512                 if (time_after(np->s.settle_time, tlimit)) {
 513                         np->s.settle_time = tlimit;
 514                 }
 515         }
 516
 517         if (np->s.settle_time_valid)
 518                 return SCSI_MLQUEUE_HOST_BUSY;
 519
 520         sts = sym_queue_command(np, cmd);
 521         if (sts)
 522                 return SCSI_MLQUEUE_HOST_BUSY;
 523         return 0;
 524 }
 525
 526 static DEF_SCSI_QCMD(sym53c8xx_queue_command)
 527
 528 /*
 529  *  Linux entry point of the interrupt handler.
 530  */
 531 static irqreturn_t sym53c8xx_intr(int irq, void *dev_id)
 532 {
 533         struct Scsi_Host *shost = dev_id;
 534         struct sym_data *sym_data = shost_priv(shost);
 535         irqreturn_t result;
 536
 537         /* Avoid spinloop trying to handle interrupts on frozen device */
 538         if (pci_channel_offline(sym_data->pdev))
 539                 return IRQ_NONE;
 540
 541         if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[");
 542
 543         spin_lock(shost->host_lock);
 544         result = sym_interrupt(shost);
 545         spin_unlock(shost->host_lock);
 546
 547         if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n");
 548
 549         return result;
 550 }
 551
 552 /*
 553  *  Linux entry point of the timer handler
 554  */
 555 static void sym53c8xx_timer(struct timer_list *t)
 556 {
 557         struct sym_hcb *np = from_timer(np, t, s.timer);
 558         unsigned long flags;
 559
 560         spin_lock_irqsave(np->s.host->host_lock, flags);
 561         sym_timer(np);
 562         spin_unlock_irqrestore(np->s.host->host_lock, flags);
 563 }
 564
 565
 566 /*
 567  *  What the eh thread wants us to perform.
 568  */
 569 #define SYM_EH_ABORT            0
 570 #define SYM_EH_DEVICE_RESET     1
 571 #define SYM_EH_BUS_RESET        2
 572 #define SYM_EH_HOST_RESET       3
 573
 574 /*
 575  *  Generic method for our eh processing.
 576  *  The 'op' argument tells what we have to do.
 577  */
 578 static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
 579 {
 580         struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd);
 581         struct Scsi_Host *shost = cmd->device->host;
 582         struct sym_data *sym_data = shost_priv(shost);
 583         struct pci_dev *pdev = sym_data->pdev;
 584         struct sym_hcb *np = sym_data->ncb;
 585         SYM_QUEHEAD *qp;
 586         int cmd_queued = 0;
 587         int sts = -1;
 588         struct completion eh_done;
 589
 590         scmd_printk(KERN_WARNING, cmd, "%s operation started\n", opname);
 591
 592         /* We may be in an error condition because the PCI bus
 593          * went down. In this case, we need to wait until the
 594          * PCI bus is reset, the card is reset, and only then
 595          * proceed with the scsi error recovery.  There's no
 596          * point in hurrying; take a leisurely wait.
 597          */
 598 #define WAIT_FOR_PCI_RECOVERY   35
 599         if (pci_channel_offline(pdev)) {
 600                 int finished_reset = 0;
 601                 init_completion(&eh_done);
 602                 spin_lock_irq(shost->host_lock);
 603                 /* Make sure we didn't race */
 604                 if (pci_channel_offline(pdev)) {
 605                         BUG_ON(sym_data->io_reset);
 606                         sym_data->io_reset = &eh_done;
 607                 } else {
 608                         finished_reset = 1;
 609                 }
 610                 spin_unlock_irq(shost->host_lock);
 611                 if (!finished_reset)
 612                         finished_reset = wait_for_completion_timeout
 613                                                 (sym_data->io_reset,
 614                                                 WAIT_FOR_PCI_RECOVERY*HZ);
 615                 spin_lock_irq(shost->host_lock);
 616                 sym_data->io_reset = NULL;
 617                 spin_unlock_irq(shost->host_lock);
 618                 if (!finished_reset)
 619                         return SCSI_FAILED;
 620         }
 621
 622         spin_lock_irq(shost->host_lock);
 623         /* This one is queued in some place -> to wait for completion */
 624         FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
 625                 struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
 626                 if (cp->cmd == cmd) {
 627                         cmd_queued = 1;
 628                         break;
 629                 }
 630         }
 631
 632         /* Try to proceed the operation we have been asked for */
 633         sts = -1;
 634         switch(op) {
 635         case SYM_EH_ABORT:
 636                 sts = sym_abort_scsiio(np, cmd, 1);
 637                 break;
 638         case SYM_EH_DEVICE_RESET:
 639                 sts = sym_reset_scsi_target(np, cmd->device->id);
 640                 break;
 641         case SYM_EH_BUS_RESET:
 642                 sym_reset_scsi_bus(np, 1);
 643                 sts = 0;
 644                 break;
 645         case SYM_EH_HOST_RESET:
 646                 sym_reset_scsi_bus(np, 0);
 647                 sym_start_up(shost, 1);
 648                 sts = 0;
 649                 break;
 650         default:
 651                 break;
 652         }
 653
 654         /* On error, restore everything and cross fingers :) */
 655         if (sts)
 656                 cmd_queued = 0;
 657
 658         if (cmd_queued) {
 659                 init_completion(&eh_done);
 660                 ucmd->eh_done = &eh_done;
 661                 spin_unlock_irq(shost->host_lock);
 662                 if (!wait_for_completion_timeout(&eh_done, 5*HZ)) {
 663                         ucmd->eh_done = NULL;
 664                         sts = -2;
 665                 }
 666         } else {
 667                 spin_unlock_irq(shost->host_lock);
 668         }
 669
 670         dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname,
 671                         sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed");
 672         return sts ? SCSI_FAILED : SCSI_SUCCESS;
 673 }
 674
 675
 676 /*
 677  * Error handlers called from the eh thread (one thread per HBA).
 678  */
 679 static int sym53c8xx_eh_abort_handler(struct scsi_cmnd *cmd)
 680 {
 681         return sym_eh_handler(SYM_EH_ABORT, "ABORT", cmd);
 682 }
 683
 684 static int sym53c8xx_eh_device_reset_handler(struct scsi_cmnd *cmd)
 685 {
 686         return sym_eh_handler(SYM_EH_DEVICE_RESET, "DEVICE RESET", cmd);
 687 }
 688
 689 static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
 690 {
 691         return sym_eh_handler(SYM_EH_BUS_RESET, "BUS RESET", cmd);
 692 }
 693
 694 static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
 695 {
 696         return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
 697 }
 698
 699 /*
 700  *  Tune device queuing depth, according to various limits.
 701  */
 702 static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
 703 {
 704         struct sym_lcb *lp = sym_lp(tp, lun);
 705         u_short oldtags;
 706
 707         if (!lp)
 708                 return;
 709
 710         oldtags = lp->s.reqtags;
 711
 712         if (reqtags > lp->s.scdev_depth)
 713                 reqtags = lp->s.scdev_depth;
 714
 715         lp->s.reqtags     = reqtags;
 716
 717         if (reqtags != oldtags) {
 718                 dev_info(&tp->starget->dev,
 719                          "tagged command queuing %s, command queue depth %d.\n",
 720                           lp->s.reqtags ? "enabled" : "disabled", reqtags);
 721         }
 722 }
 723
 724 static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 725 {
 726         struct sym_hcb *np = sym_get_hcb(sdev->host);
 727         struct sym_tcb *tp = &np->target[sdev->id];
 728         struct sym_lcb *lp;
 729         unsigned long flags;
 730         int error;
 731
 732         if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
 733                 return -ENXIO;
 734
 735         spin_lock_irqsave(np->s.host->host_lock, flags);
 736
 737         /*
 738          * Fail the device init if the device is flagged NOSCAN at BOOT in
 739          * the NVRAM.  This may speed up boot and maintain coherency with
 740          * BIOS device numbering.  Clearing the flag allows the user to
 741          * rescan skipped devices later.  We also return an error for
 742          * devices not flagged for SCAN LUNS in the NVRAM since some single
 743          * lun devices behave badly when asked for a non zero LUN.
 744          */
 745
 746         if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) {
 747                 tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
 748                 starget_printk(KERN_INFO, sdev->sdev_target,
 749                                 "Scan at boot disabled in NVRAM\n");
 750                 error = -ENXIO;
 751                 goto out;
 752         }
 753
 754         if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) {
 755                 if (sdev->lun != 0) {
 756                         error = -ENXIO;
 757                         goto out;
 758                 }
 759                 starget_printk(KERN_INFO, sdev->sdev_target,
 760                                 "Multiple LUNs disabled in NVRAM\n");
 761         }
 762
 763         lp = sym_alloc_lcb(np, sdev->id, sdev->lun);
 764         if (!lp) {
 765                 error = -ENOMEM;
 766                 goto out;
 767         }
 768         if (tp->nlcb == 1)
 769                 tp->starget = sdev->sdev_target;
 770
 771         spi_min_period(tp->starget) = tp->usr_period;
 772         spi_max_width(tp->starget) = tp->usr_width;
 773
 774         error = 0;
 775 out:
 776         spin_unlock_irqrestore(np->s.host->host_lock, flags);
 777
 778         return error;
 779 }
 780
 781 /*
 782  * Linux entry point for device queue sizing.
 783  */
 784 static int sym53c8xx_slave_configure(struct scsi_device *sdev)
 785 {
 786         struct sym_hcb *np = sym_get_hcb(sdev->host);
 787         struct sym_tcb *tp = &np->target[sdev->id];
 788         struct sym_lcb *lp = sym_lp(tp, sdev->lun);
 789         int reqtags, depth_to_use;
 790
 791         /*
 792          *  Get user flags.
 793          */
 794         lp->curr_flags = lp->user_flags;
 795
 796         /*
 797          *  Select queue depth from driver setup.
 798          *  Do not use more than configured by user.
 799          *  Use at least 1.
 800          *  Do not use more than our maximum.
 801          */
 802         reqtags = sym_driver_setup.max_tag;
 803         if (reqtags > tp->usrtags)
 804                 reqtags = tp->usrtags;
 805         if (!sdev->tagged_supported)
 806                 reqtags = 0;
 807         if (reqtags > SYM_CONF_MAX_TAG)
 808                 reqtags = SYM_CONF_MAX_TAG;
 809         depth_to_use = reqtags ? reqtags : 1;
 810         scsi_change_queue_depth(sdev, depth_to_use);
 811         lp->s.scdev_depth = depth_to_use;
 812         sym_tune_dev_queuing(tp, sdev->lun, reqtags);
 813
 814         if (!spi_initial_dv(sdev->sdev_target))
 815                 spi_dv_device(sdev);
 816
 817         return 0;
 818 }
 819
 820 static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
 821 {
 822         struct sym_hcb *np = sym_get_hcb(sdev->host);
 823         struct sym_tcb *tp = &np->target[sdev->id];
 824         struct sym_lcb *lp = sym_lp(tp, sdev->lun);
 825         unsigned long flags;
 826
 827         /* if slave_alloc returned before allocating a sym_lcb, return */
 828         if (!lp)
 829                 return;
 830
 831         spin_lock_irqsave(np->s.host->host_lock, flags);
 832
 833         if (lp->busy_itlq || lp->busy_itl) {
 834                 /*
 835                  * This really shouldn't happen, but we can't return an error
 836                  * so let's try to stop all on-going I/O.
 837                  */
 838                 starget_printk(KERN_WARNING, tp->starget,
 839                                "Removing busy LCB (%d)\n", (u8)sdev->lun);
 840                 sym_reset_scsi_bus(np, 1);
 841         }
 842
 843         if (sym_free_lcb(np, sdev->id, sdev->lun) == 0) {
 844                 /*
 845                  * It was the last unit for this target.
 846                  */
 847                 tp->head.sval        = 0;
 848                 tp->head.wval        = np->rv_scntl3;
 849                 tp->head.uval        = 0;
 850                 tp->tgoal.check_nego = 1;
 851                 tp->starget          = NULL;
 852         }
 853
 854         spin_unlock_irqrestore(np->s.host->host_lock, flags);
 855 }
 856
 857 /*
 858  *  Linux entry point for info() function
 859  */
 860 static const char *sym53c8xx_info (struct Scsi_Host *host)
 861 {
 862         return SYM_DRIVER_NAME;
 863 }
 864
 865
 866 #ifdef SYM_LINUX_PROC_INFO_SUPPORT
 867 /*
 868  *  Proc file system stuff
 869  *
 870  *  A read operation returns adapter information.
 871  *  A write operation is a control command.
 872  *  The string is parsed in the driver code and the command is passed
 873  *  to the sym_usercmd() function.
 874  */
 875
 876 #ifdef SYM_LINUX_USER_COMMAND_SUPPORT
 877
 878 struct  sym_usrcmd {
 879         u_long  target;
 880         u_long  lun;
 881         u_long  data;
 882         u_long  cmd;
 883 };
 884
 885 #define UC_SETSYNC      10
 886 #define UC_SETTAGS      11
 887 #define UC_SETDEBUG     12
 888 #define UC_SETWIDE      14
 889 #define UC_SETFLAG      15
 890 #define UC_SETVERBOSE   17
 891 #define UC_RESETDEV     18
 892 #define UC_CLEARDEV     19
 893
 894 static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc)
 895 {
 896         struct sym_tcb *tp;
 897         int t, l;
 898
 899         switch (uc->cmd) {
 900         case 0: return;
 901
 902 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
 903         case UC_SETDEBUG:
 904                 sym_debug_flags = uc->data;
 905                 break;
 906 #endif
 907         case UC_SETVERBOSE:
 908                 np->verbose = uc->data;
 909                 break;
 910         default:
 911                 /*
 912                  * We assume that other commands apply to targets.
 913                  * This should always be the case and avoid the below
 914                  * 4 lines to be repeated 6 times.
 915                  */
 916                 for (t = 0; t < SYM_CONF_MAX_TARGET; t++) {
 917                         if (!((uc->target >> t) & 1))
 918                                 continue;
 919                         tp = &np->target[t];
 920                         if (!tp->nlcb)
 921                                 continue;
 922
 923                         switch (uc->cmd) {
 924
 925                         case UC_SETSYNC:
 926                                 if (!uc->data || uc->data >= 255) {
 927                                         tp->tgoal.iu = tp->tgoal.dt =
 928                                                 tp->tgoal.qas = 0;
 929                                         tp->tgoal.offset = 0;
 930                                 } else if (uc->data <= 9 && np->minsync_dt) {
 931                                         if (uc->data < np->minsync_dt)
 932                                                 uc->data = np->minsync_dt;
 933                                         tp->tgoal.iu = tp->tgoal.dt =
 934                                                 tp->tgoal.qas = 1;
 935                                         tp->tgoal.width = 1;
 936                                         tp->tgoal.period = uc->data;
 937                                         tp->tgoal.offset = np->maxoffs_dt;
 938                                 } else {
 939                                         if (uc->data < np->minsync)
 940                                                 uc->data = np->minsync;
 941                                         tp->tgoal.iu = tp->tgoal.dt =
 942                                                 tp->tgoal.qas = 0;
 943                                         tp->tgoal.period = uc->data;
 944                                         tp->tgoal.offset = np->maxoffs;
 945                                 }
 946                                 tp->tgoal.check_nego = 1;
 947                                 break;
 948                         case UC_SETWIDE:
 949                                 tp->tgoal.width = uc->data ? 1 : 0;
 950                                 tp->tgoal.check_nego = 1;
 951                                 break;
 952                         case UC_SETTAGS:
 953                                 for (l = 0; l < SYM_CONF_MAX_LUN; l++)
 954                                         sym_tune_dev_queuing(tp, l, uc->data);
 955                                 break;
 956                         case UC_RESETDEV:
 957                                 tp->to_reset = 1;
 958                                 np->istat_sem = SEM;
 959                                 OUTB(np, nc_istat, SIGP|SEM);
 960                                 break;
 961                         case UC_CLEARDEV:
 962                                 for (l = 0; l < SYM_CONF_MAX_LUN; l++) {
 963                                         struct sym_lcb *lp = sym_lp(tp, l);
 964                                         if (lp) lp->to_clear = 1;
 965                                 }
 966                                 np->istat_sem = SEM;
 967                                 OUTB(np, nc_istat, SIGP|SEM);
 968                                 break;
 969                         case UC_SETFLAG:
 970                                 tp->usrflags = uc->data;
 971                                 break;
 972                         }
 973                 }
 974                 break;
 975         }
 976 }
 977
 978 static int sym_skip_spaces(char *ptr, int len)
 979 {
 980         int cnt, c;
 981
 982         for (cnt = len; cnt > 0 && (c = *ptr++) && isspace(c); cnt--);
 983
 984         return (len - cnt);
 985 }
 986
 987 static int get_int_arg(char *ptr, int len, u_long *pv)
 988 {
 989         char *end;
 990
 991         *pv = simple_strtoul(ptr, &end, 10);
 992         return (end - ptr);
 993 }
 994
 995 static int is_keyword(char *ptr, int len, char *verb)
 996 {
 997         int verb_len = strlen(verb);
 998
 999         if (len >= verb_len && !memcmp(verb, ptr, verb_len))
1000                 return verb_len;
1001         else
1002                 return 0;
1003 }
1004
1005 #define SKIP_SPACES(ptr, len)                                           \
1006         if ((arg_len = sym_skip_spaces(ptr, len)) < 1)                  \
1007                 return -EINVAL;                                         \
1008         ptr += arg_len; len -= arg_len;
1009
1010 #define GET_INT_ARG(ptr, len, v)                                        \
1011         if (!(arg_len = get_int_arg(ptr, len, &(v))))                   \
1012                 return -EINVAL;                                         \
1013         ptr += arg_len; len -= arg_len;
1014
1015
1016 /*
1017  * Parse a control command
1018  */
1019
1020 static int sym_user_command(struct Scsi_Host *shost, char *buffer, int length)
1021 {
1022         struct sym_hcb *np = sym_get_hcb(shost);
1023         char *ptr       = buffer;
1024         int len         = length;
1025         struct sym_usrcmd cmd, *uc = &cmd;
1026         int             arg_len;
1027         u_long          target;
1028
1029         memset(uc, 0, sizeof(*uc));
1030
1031         if (len > 0 && ptr[len-1] == '\n')
1032                 --len;
1033
1034         if      ((arg_len = is_keyword(ptr, len, "setsync")) != 0)
1035                 uc->cmd = UC_SETSYNC;
1036         else if ((arg_len = is_keyword(ptr, len, "settags")) != 0)
1037                 uc->cmd = UC_SETTAGS;
1038         else if ((arg_len = is_keyword(ptr, len, "setverbose")) != 0)
1039                 uc->cmd = UC_SETVERBOSE;
1040         else if ((arg_len = is_keyword(ptr, len, "setwide")) != 0)
1041                 uc->cmd = UC_SETWIDE;
1042 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
1043         else if ((arg_len = is_keyword(ptr, len, "setdebug")) != 0)
1044                 uc->cmd = UC_SETDEBUG;
1045 #endif
1046         else if ((arg_len = is_keyword(ptr, len, "setflag")) != 0)
1047                 uc->cmd = UC_SETFLAG;
1048         else if ((arg_len = is_keyword(ptr, len, "resetdev")) != 0)
1049                 uc->cmd = UC_RESETDEV;
1050         else if ((arg_len = is_keyword(ptr, len, "cleardev")) != 0)
1051                 uc->cmd = UC_CLEARDEV;
1052         else
1053                 arg_len = 0;
1054
1055 #ifdef DEBUG_PROC_INFO
1056 printk("sym_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
1057 #endif
1058
1059         if (!arg_len)
1060                 return -EINVAL;
1061         ptr += arg_len; len -= arg_len;
1062
1063         switch(uc->cmd) {
1064         case UC_SETSYNC:
1065         case UC_SETTAGS:
1066         case UC_SETWIDE:
1067         case UC_SETFLAG:
1068         case UC_RESETDEV:
1069         case UC_CLEARDEV:
1070                 SKIP_SPACES(ptr, len);
1071                 if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
1072                         ptr += arg_len; len -= arg_len;
1073                         uc->target = ~0;
1074                 } else {
1075                         GET_INT_ARG(ptr, len, target);
1076                         uc->target = (1<<target);
1077 #ifdef DEBUG_PROC_INFO
1078 printk("sym_user_command: target=%ld\n", target);
1079 #endif
1080                 }
1081                 break;
1082         }
1083
1084         switch(uc->cmd) {
1085         case UC_SETVERBOSE:
1086         case UC_SETSYNC:
1087         case UC_SETTAGS:
1088         case UC_SETWIDE:
1089                 SKIP_SPACES(ptr, len);
1090                 GET_INT_ARG(ptr, len, uc->data);
1091 #ifdef DEBUG_PROC_INFO
1092 printk("sym_user_command: data=%ld\n", uc->data);
1093 #endif
1094                 break;
1095 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
1096         case UC_SETDEBUG:
1097                 while (len > 0) {
1098                         SKIP_SPACES(ptr, len);
1099                         if      ((arg_len = is_keyword(ptr, len, "alloc")))
1100                                 uc->data |= DEBUG_ALLOC;
1101                         else if ((arg_len = is_keyword(ptr, len, "phase")))
1102                                 uc->data |= DEBUG_PHASE;
1103                         else if ((arg_len = is_keyword(ptr, len, "queue")))
1104                                 uc->data |= DEBUG_QUEUE;
1105                         else if ((arg_len = is_keyword(ptr, len, "result")))
1106                                 uc->data |= DEBUG_RESULT;
1107                         else if ((arg_len = is_keyword(ptr, len, "scatter")))
1108                                 uc->data |= DEBUG_SCATTER;
1109                         else if ((arg_len = is_keyword(ptr, len, "script")))
1110                                 uc->data |= DEBUG_SCRIPT;
1111                         else if ((arg_len = is_keyword(ptr, len, "tiny")))
1112                                 uc->data |= DEBUG_TINY;
1113                         else if ((arg_len = is_keyword(ptr, len, "timing")))
1114                                 uc->data |= DEBUG_TIMING;
1115                         else if ((arg_len = is_keyword(ptr, len, "nego")))
1116                                 uc->data |= DEBUG_NEGO;
1117                         else if ((arg_len = is_keyword(ptr, len, "tags")))
1118                                 uc->data |= DEBUG_TAGS;
1119                         else if ((arg_len = is_keyword(ptr, len, "pointer")))
1120                                 uc->data |= DEBUG_POINTER;
1121                         else
1122                                 return -EINVAL;
1123                         ptr += arg_len; len -= arg_len;
1124                 }
1125 #ifdef DEBUG_PROC_INFO
1126 printk("sym_user_command: data=%ld\n", uc->data);
1127 #endif
1128                 break;
1129 #endif /* SYM_LINUX_DEBUG_CONTROL_SUPPORT */
1130         case UC_SETFLAG:
1131                 while (len > 0) {
1132                         SKIP_SPACES(ptr, len);
1133                         if      ((arg_len = is_keyword(ptr, len, "no_disc")))
1134                                 uc->data &= ~SYM_DISC_ENABLED;
1135                         else
1136                                 return -EINVAL;
1137                         ptr += arg_len; len -= arg_len;
1138                 }
1139                 break;
1140         default:
1141                 break;
1142         }
1143
1144         if (len)
1145                 return -EINVAL;
1146         else {
1147                 unsigned long flags;
1148
1149                 spin_lock_irqsave(shost->host_lock, flags);
1150                 sym_exec_user_command(np, uc);
1151                 spin_unlock_irqrestore(shost->host_lock, flags);
1152         }
1153         return length;
1154 }
1155
1156 #endif  /* SYM_LINUX_USER_COMMAND_SUPPORT */
1157
1158
1159 /*
1160  *  Copy formatted information into the input buffer.
1161  */
1162 static int sym_show_info(struct seq_file *m, struct Scsi_Host *shost)
1163 {
1164 #ifdef SYM_LINUX_USER_INFO_SUPPORT
1165         struct sym_data *sym_data = shost_priv(shost);
1166         struct pci_dev *pdev = sym_data->pdev;
1167         struct sym_hcb *np = sym_data->ncb;
1168
1169         seq_printf(m, "Chip " NAME53C "%s, device id 0x%x, "
1170                  "revision id 0x%x\n", np->s.chip_name,
1171                  pdev->device, pdev->revision);
1172         seq_printf(m, "At PCI address %s, IRQ %u\n",
1173                          pci_name(pdev), pdev->irq);
1174         seq_printf(m, "Min. period factor %d, %s SCSI BUS%s\n",
1175                  (int) (np->minsync_dt ? np->minsync_dt : np->minsync),
1176                  np->maxwide ? "Wide" : "Narrow",
1177                  np->minsync_dt ? ", DT capable" : "");
1178
1179         seq_printf(m, "Max. started commands %d, "
1180                  "max. commands per LUN %d\n",
1181                  SYM_CONF_MAX_START, SYM_CONF_MAX_TAG);
1182
1183         return 0;
1184 #else
1185         return -EINVAL;
1186 #endif /* SYM_LINUX_USER_INFO_SUPPORT */
1187 }
1188
1189 #endif /* SYM_LINUX_PROC_INFO_SUPPORT */
1190
1191 /*
1192  * Free resources claimed by sym_iomap_device().  Note that
1193  * sym_free_resources() should be used instead of this function after calling
1194  * sym_attach().
1195  */
1196 static void sym_iounmap_device(struct sym_device *device)
1197 {
1198         if (device->s.ioaddr)
1199                 pci_iounmap(device->pdev, device->s.ioaddr);
1200         if (device->s.ramaddr)
1201                 pci_iounmap(device->pdev, device->s.ramaddr);
1202 }
1203
1204 /*
1205  *      Free controller resources.
1206  */
1207 static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev,
1208                 int do_free_irq)
1209 {
1210         /*
1211          *  Free O/S specific resources.
1212          */
1213         if (do_free_irq)
1214                 free_irq(pdev->irq, np->s.host);
1215         if (np->s.ioaddr)
1216                 pci_iounmap(pdev, np->s.ioaddr);
1217         if (np->s.ramaddr)
1218                 pci_iounmap(pdev, np->s.ramaddr);
1219         /*
1220          *  Free O/S independent resources.
1221          */
1222         sym_hcb_free(np);
1223
1224         sym_mfree_dma(np, sizeof(*np), "HCB");
1225 }
1226
1227 /*
1228  *  Host attach and initialisations.
1229  *
1230  *  Allocate host data and ncb structure.
1231  *  Remap MMIO region.
1232  *  Do chip initialization.
1233  *  If all is OK, install interrupt handling and
1234  *  start the timer daemon.
1235  */
1236 static struct Scsi_Host *sym_attach(struct scsi_host_template *tpnt, int unit,
1237                                     struct sym_device *dev)
1238 {
1239         struct sym_data *sym_data;
1240         struct sym_hcb *np = NULL;
1241         struct Scsi_Host *shost = NULL;
1242         struct pci_dev *pdev = dev->pdev;
1243         unsigned long flags;
1244         struct sym_fw *fw;
1245         int do_free_irq = 0;
1246
1247         printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n",
1248                 unit, dev->chip.name, pdev->revision, pci_name(pdev),
1249                 pdev->irq);
1250
1251         /*
1252          *  Get the firmware for this chip.
1253          */
1254         fw = sym_find_firmware(&dev->chip);
1255         if (!fw)
1256                 goto attach_failed;
1257
1258         shost = scsi_host_alloc(tpnt, sizeof(*sym_data));
1259         if (!shost)
1260                 goto attach_failed;
1261         sym_data = shost_priv(shost);
1262
1263         /*
1264          *  Allocate immediately the host control block,
1265          *  since we are only expecting to succeed. :)
1266          *  We keep track in the HCB of all the resources that
1267          *  are to be released on error.
1268          */
1269         np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB");
1270         if (!np)
1271                 goto attach_failed;
1272         np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */
1273         sym_data->ncb = np;
1274         sym_data->pdev = pdev;
1275         np->s.host = shost;
1276
1277         pci_set_drvdata(pdev, shost);
1278
1279         /*
1280          *  Copy some useful infos to the HCB.
1281          */
1282         np->hcb_ba      = vtobus(np);
1283         np->verbose     = sym_driver_setup.verbose;
1284         np->s.unit      = unit;
1285         np->features    = dev->chip.features;
1286         np->clock_divn  = dev->chip.nr_divisor;
1287         np->maxoffs     = dev->chip.offset_max;
1288         np->maxburst    = dev->chip.burst_max;
1289         np->myaddr      = dev->host_id;
1290         np->mmio_ba     = (u32)dev->mmio_base;
1291         np->ram_ba      = (u32)dev->ram_base;
1292         np->s.ioaddr    = dev->s.ioaddr;
1293         np->s.ramaddr   = dev->s.ramaddr;
1294
1295         /*
1296          *  Edit its name.
1297          */
1298         strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name));
1299         sprintf(np->s.inst_name, "sym%d", np->s.unit);
1300
1301         if ((SYM_CONF_DMA_ADDRESSING_MODE > 0) && (np->features & FE_DAC) &&
1302                         !dma_set_mask(&pdev->dev, DMA_DAC_MASK)) {
1303                 set_dac(np);
1304         } else if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1305                 printf_warning("%s: No suitable DMA available\n", sym_name(np));
1306                 goto attach_failed;
1307         }
1308
1309         if (sym_hcb_attach(shost, fw, dev->nvram))
1310                 goto attach_failed;
1311
1312         /*
1313          *  Install the interrupt handler.
1314          *  If we synchonize the C code with SCRIPTS on interrupt,
1315          *  we do not want to share the INTR line at all.
1316          */
1317         if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX,
1318                         shost)) {
1319                 printf_err("%s: request irq %u failure\n",
1320                         sym_name(np), pdev->irq);
1321                 goto attach_failed;
1322         }
1323         do_free_irq = 1;
1324
1325         /*
1326          *  After SCSI devices have been opened, we cannot
1327          *  reset the bus safely, so we do it here.
1328          */
1329         spin_lock_irqsave(shost->host_lock, flags);
1330         if (sym_reset_scsi_bus(np, 0))
1331                 goto reset_failed;
1332
1333         /*
1334          *  Start the SCRIPTS.
1335          */
1336         sym_start_up(shost, 1);
1337
1338         /*
1339          *  Start the timer daemon
1340          */
1341         timer_setup(&np->s.timer, sym53c8xx_timer, 0);
1342         np->s.lasttime=0;
1343         sym_timer (np);
1344
1345         /*
1346          *  Fill Linux host instance structure
1347          *  and return success.
1348          */
1349         shost->max_channel      = 0;
1350         shost->this_id          = np->myaddr;
1351         shost->max_id           = np->maxwide ? 16 : 8;
1352         shost->max_lun          = SYM_CONF_MAX_LUN;
1353         shost->unique_id        = pci_resource_start(pdev, 0);
1354         shost->cmd_per_lun      = SYM_CONF_MAX_TAG;
1355         shost->can_queue        = (SYM_CONF_MAX_START-2);
1356         shost->sg_tablesize     = SYM_CONF_MAX_SG;
1357         shost->max_cmd_len      = 16;
1358         BUG_ON(sym2_transport_template == NULL);
1359         shost->transportt       = sym2_transport_template;
1360
1361         /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */
1362         if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2)
1363                 shost->dma_boundary = 0xFFFFFF;
1364
1365         spin_unlock_irqrestore(shost->host_lock, flags);
1366
1367         return shost;
1368
1369  reset_failed:
1370         printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, "
1371                    "TERMINATION, DEVICE POWER etc.!\n", sym_name(np));
1372         spin_unlock_irqrestore(shost->host_lock, flags);
1373  attach_failed:
1374         printf_info("sym%d: giving up ...\n", unit);
1375         if (np)
1376                 sym_free_resources(np, pdev, do_free_irq);
1377         else
1378                 sym_iounmap_device(dev);
1379         if (shost)
1380                 scsi_host_put(shost);
1381
1382         return NULL;
1383 }
1384
1385
1386 /*
1387  *    Detect and try to read SYMBIOS and TEKRAM NVRAM.
1388  */
1389 #if SYM_CONF_NVRAM_SUPPORT
1390 static void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
1391 {
1392         devp->nvram = nvp;
1393         nvp->type = 0;
1394
1395         sym_read_nvram(devp, nvp);
1396 }
1397 #else
1398 static inline void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
1399 {
1400 }
1401 #endif  /* SYM_CONF_NVRAM_SUPPORT */
1402
1403 static int sym_check_supported(struct sym_device *device)
1404 {
1405         struct sym_chip *chip;
1406         struct pci_dev *pdev = device->pdev;
1407         unsigned long io_port = pci_resource_start(pdev, 0);
1408         int i;
1409
1410         /*
1411          *  If user excluded this chip, do not initialize it.
1412          *  I hate this code so much.  Must kill it.
1413          */
1414         if (io_port) {
1415                 for (i = 0 ; i < 8 ; i++) {
1416                         if (sym_driver_setup.excludes[i] == io_port)
1417                                 return -ENODEV;
1418                 }
1419         }
1420
1421         /*
1422          * Check if the chip is supported.  Then copy the chip description
1423          * to our device structure so we can make it match the actual device
1424          * and options.
1425          */
1426         chip = sym_lookup_chip_table(pdev->device, pdev->revision);
1427         if (!chip) {
1428                 dev_info(&pdev->dev, "device not supported\n");
1429                 return -ENODEV;
1430         }
1431         memcpy(&device->chip, chip, sizeof(device->chip));
1432
1433         return 0;
1434 }
1435
1436 /*
1437  * Ignore Symbios chips controlled by various RAID controllers.
1438  * These controllers set value 0x52414944 at RAM end - 16.
1439  */
1440 static int sym_check_raid(struct sym_device *device)
1441 {
1442         unsigned int ram_size, ram_val;
1443
1444         if (!device->s.ramaddr)
1445                 return 0;
1446
1447         if (device->chip.features & FE_RAM8K)
1448                 ram_size = 8192;
1449         else
1450                 ram_size = 4096;
1451
1452         ram_val = readl(device->s.ramaddr + ram_size - 16);
1453         if (ram_val != 0x52414944)
1454                 return 0;
1455
1456         dev_info(&device->pdev->dev,
1457                         "not initializing, driven by RAID controller.\n");
1458         return -ENODEV;
1459 }
1460
1461 static int sym_set_workarounds(struct sym_device *device)
1462 {
1463         struct sym_chip *chip = &device->chip;
1464         struct pci_dev *pdev = device->pdev;
1465         u_short status_reg;
1466
1467         /*
1468          *  (ITEM 12 of a DEL about the 896 I haven't yet).
1469          *  We must ensure the chip will use WRITE AND INVALIDATE.
1470          *  The revision number limit is for now arbitrary.
1471          */
1472         if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) {
1473                 chip->features  |= (FE_WRIE | FE_CLSE);
1474         }
1475
1476         /* If the chip can do Memory Write Invalidate, enable it */
1477         if (chip->features & FE_WRIE) {
1478                 if (pci_set_mwi(pdev))
1479                         return -ENODEV;
1480         }
1481
1482         /*
1483          *  Work around for errant bit in 895A. The 66Mhz
1484          *  capable bit is set erroneously. Clear this bit.
1485          *  (Item 1 DEL 533)
1486          *
1487          *  Make sure Config space and Features agree.
1488          *
1489          *  Recall: writes are not normal to status register -
1490          *  write a 1 to clear and a 0 to leave unchanged.
1491          *  Can only reset bits.
1492          */
1493         pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1494         if (chip->features & FE_66MHZ) {
1495                 if (!(status_reg & PCI_STATUS_66MHZ))
1496                         chip->features &= ~FE_66MHZ;
1497         } else {
1498                 if (status_reg & PCI_STATUS_66MHZ) {
1499                         status_reg = PCI_STATUS_66MHZ;
1500                         pci_write_config_word(pdev, PCI_STATUS, status_reg);
1501                         pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1502                 }
1503         }
1504
1505         return 0;
1506 }
1507
1508 /*
1509  * Map HBA registers and on-chip SRAM (if present).
1510  */
1511 static int sym_iomap_device(struct sym_device *device)
1512 {
1513         struct pci_dev *pdev = device->pdev;
1514         struct pci_bus_region bus_addr;
1515         int i = 2;
1516
1517         pcibios_resource_to_bus(pdev->bus, &bus_addr, &pdev->resource[1]);
1518         device->mmio_base = bus_addr.start;
1519
1520         if (device->chip.features & FE_RAM) {
1521                 /*
1522                  * If the BAR is 64-bit, resource 2 will be occupied by the
1523                  * upper 32 bits
1524                  */
1525                 if (!pdev->resource[i].flags)
1526                         i++;
1527                 pcibios_resource_to_bus(pdev->bus, &bus_addr,
1528                                         &pdev->resource[i]);
1529                 device->ram_base = bus_addr.start;
1530         }
1531
1532 #ifdef CONFIG_SCSI_SYM53C8XX_MMIO
1533         if (device->mmio_base)
1534                 device->s.ioaddr = pci_iomap(pdev, 1,
1535                                                 pci_resource_len(pdev, 1));
1536 #endif
1537         if (!device->s.ioaddr)
1538                 device->s.ioaddr = pci_iomap(pdev, 0,
1539                                                 pci_resource_len(pdev, 0));
1540         if (!device->s.ioaddr) {
1541                 dev_err(&pdev->dev, "could not map registers; giving up.\n");
1542                 return -EIO;
1543         }
1544         if (device->ram_base) {
1545                 device->s.ramaddr = pci_iomap(pdev, i,
1546                                                 pci_resource_len(pdev, i));
1547                 if (!device->s.ramaddr) {
1548                         dev_warn(&pdev->dev,
1549                                 "could not map SRAM; continuing anyway.\n");
1550                         device->ram_base = 0;
1551                 }
1552         }
1553
1554         return 0;
1555 }
1556
1557 /*
1558  * The NCR PQS and PDS cards are constructed as a DEC bridge
1559  * behind which sits a proprietary NCR memory controller and
1560  * either four or two 53c875s as separate devices.  We can tell
1561  * if an 875 is part of a PQS/PDS or not since if it is, it will
1562  * be on the same bus as the memory controller.  In its usual
1563  * mode of operation, the 875s are slaved to the memory
1564  * controller for all transfers.  To operate with the Linux
1565  * driver, the memory controller is disabled and the 875s
1566  * freed to function independently.  The only wrinkle is that
1567  * the preset SCSI ID (which may be zero) must be read in from
1568  * a special configuration space register of the 875.
1569  */
1570 static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev)
1571 {
1572         int slot;
1573         u8 tmp;
1574
1575         for (slot = 0; slot < 256; slot++) {
1576                 struct pci_dev *memc = pci_get_slot(pdev->bus, slot);
1577
1578                 if (!memc || memc->vendor != 0x101a || memc->device == 0x0009) {
1579                         pci_dev_put(memc);
1580                         continue;
1581                 }
1582
1583                 /* bit 1: allow individual 875 configuration */
1584                 pci_read_config_byte(memc, 0x44, &tmp);
1585                 if ((tmp & 0x2) == 0) {
1586                         tmp |= 0x2;
1587                         pci_write_config_byte(memc, 0x44, tmp);
1588                 }
1589
1590                 /* bit 2: drive individual 875 interrupts to the bus */
1591                 pci_read_config_byte(memc, 0x45, &tmp);
1592                 if ((tmp & 0x4) == 0) {
1593                         tmp |= 0x4;
1594                         pci_write_config_byte(memc, 0x45, tmp);
1595                 }
1596
1597                 pci_dev_put(memc);
1598                 break;
1599         }
1600
1601         pci_read_config_byte(pdev, 0x84, &tmp);
1602         sym_dev->host_id = tmp;
1603 }
1604
1605 /*
1606  *  Called before unloading the module.
1607  *  Detach the host.
1608  *  We have to free resources and halt the NCR chip.
1609  */
1610 static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev)
1611 {
1612         struct sym_hcb *np = sym_get_hcb(shost);
1613         printk("%s: detaching ...\n", sym_name(np));
1614
1615         del_timer_sync(&np->s.timer);
1616
1617         /*
1618          * Reset NCR chip.
1619          * We should use sym_soft_reset(), but we don't want to do
1620          * so, since we may not be safe if interrupts occur.
1621          */
1622         printk("%s: resetting chip\n", sym_name(np));
1623         OUTB(np, nc_istat, SRST);
1624         INB(np, nc_mbox1);
1625         udelay(10);
1626         OUTB(np, nc_istat, 0);
1627
1628         sym_free_resources(np, pdev, 1);
1629         scsi_host_put(shost);
1630
1631         return 1;
1632 }
1633
1634 /*
1635  * Driver host template.
1636  */
1637 static struct scsi_host_template sym2_template = {
1638         .module                 = THIS_MODULE,
1639         .name                   = "sym53c8xx",
1640         .info                   = sym53c8xx_info,
1641         .queuecommand           = sym53c8xx_queue_command,
1642         .slave_alloc            = sym53c8xx_slave_alloc,
1643         .slave_configure        = sym53c8xx_slave_configure,
1644         .slave_destroy          = sym53c8xx_slave_destroy,
1645         .eh_abort_handler       = sym53c8xx_eh_abort_handler,
1646         .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
1647         .eh_bus_reset_handler   = sym53c8xx_eh_bus_reset_handler,
1648         .eh_host_reset_handler  = sym53c8xx_eh_host_reset_handler,
1649         .this_id                = 7,
1650         .max_sectors            = 0xFFFF,
1651 #ifdef SYM_LINUX_PROC_INFO_SUPPORT
1652         .show_info              = sym_show_info,
1653 #ifdef  SYM_LINUX_USER_COMMAND_SUPPORT
1654         .write_info             = sym_user_command,
1655 #endif
1656         .proc_name              = NAME53C8XX,
1657 #endif
1658 };
1659
1660 static int attach_count;
1661
1662 static int sym2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1663 {
1664         struct sym_device sym_dev;
1665         struct sym_nvram nvram;
1666         struct Scsi_Host *shost;
1667         int do_iounmap = 0;
1668         int do_disable_device = 1;
1669
1670         memset(&sym_dev, 0, sizeof(sym_dev));
1671         memset(&nvram, 0, sizeof(nvram));
1672         sym_dev.pdev = pdev;
1673         sym_dev.host_id = SYM_SETUP_HOST_ID;
1674
1675         if (pci_enable_device(pdev))
1676                 goto leave;
1677
1678         pci_set_master(pdev);
1679
1680         if (pci_request_regions(pdev, NAME53C8XX))
1681                 goto disable;
1682
1683         if (sym_check_supported(&sym_dev))
1684                 goto free;
1685
1686         if (sym_iomap_device(&sym_dev))
1687                 goto free;
1688         do_iounmap = 1;
1689
1690         if (sym_check_raid(&sym_dev)) {
1691                 do_disable_device = 0;  /* Don't disable the device */
1692                 goto free;
1693         }
1694
1695         if (sym_set_workarounds(&sym_dev))
1696                 goto free;
1697
1698         sym_config_pqs(pdev, &sym_dev);
1699
1700         sym_get_nvram(&sym_dev, &nvram);
1701
1702         do_iounmap = 0; /* Don't sym_iounmap_device() after sym_attach(). */
1703         shost = sym_attach(&sym2_template, attach_count, &sym_dev);
1704         if (!shost)
1705                 goto free;
1706
1707         if (scsi_add_host(shost, &pdev->dev))
1708                 goto detach;
1709         scsi_scan_host(shost);
1710
1711         attach_count++;
1712
1713         return 0;
1714
1715  detach:
1716         sym_detach(pci_get_drvdata(pdev), pdev);
1717  free:
1718         if (do_iounmap)
1719                 sym_iounmap_device(&sym_dev);
1720         pci_release_regions(pdev);
1721  disable:
1722         if (do_disable_device)
1723                 pci_disable_device(pdev);
1724  leave:
1725         return -ENODEV;
1726 }
1727
1728 static void sym2_remove(struct pci_dev *pdev)
1729 {
1730         struct Scsi_Host *shost = pci_get_drvdata(pdev);
1731
1732         scsi_remove_host(shost);
1733         sym_detach(shost, pdev);
1734         pci_release_regions(pdev);
1735         pci_disable_device(pdev);
1736
1737         attach_count--;
1738 }
1739
1740 /**
1741  * sym2_io_error_detected() - called when PCI error is detected
1742  * @pdev: pointer to PCI device
1743  * @state: current state of the PCI slot
1744  */
1745 static pci_ers_result_t sym2_io_error_detected(struct pci_dev *pdev,
1746                                          enum pci_channel_state state)
1747 {
1748         /* If slot is permanently frozen, turn everything off */
1749         if (state == pci_channel_io_perm_failure) {
1750                 sym2_remove(pdev);
1751                 return PCI_ERS_RESULT_DISCONNECT;
1752         }
1753
1754         disable_irq(pdev->irq);
1755         pci_disable_device(pdev);
1756
1757         /* Request that MMIO be enabled, so register dump can be taken. */
1758         return PCI_ERS_RESULT_CAN_RECOVER;
1759 }
1760
1761 /**
1762  * sym2_io_slot_dump - Enable MMIO and dump debug registers
1763  * @pdev: pointer to PCI device
1764  */
1765 static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
1766 {
1767         struct Scsi_Host *shost = pci_get_drvdata(pdev);
1768
1769         sym_dump_registers(shost);
1770
1771         /* Request a slot reset. */
1772         return PCI_ERS_RESULT_NEED_RESET;
1773 }
1774
1775 /**
1776  * sym2_reset_workarounds - hardware-specific work-arounds
1777  *
1778  * This routine is similar to sym_set_workarounds(), except
1779  * that, at this point, we already know that the device was
1780  * successfully initialized at least once before, and so most
1781  * of the steps taken there are un-needed here.
1782  */
1783 static void sym2_reset_workarounds(struct pci_dev *pdev)
1784 {
1785         u_short status_reg;
1786         struct sym_chip *chip;
1787
1788         chip = sym_lookup_chip_table(pdev->device, pdev->revision);
1789
1790         /* Work around for errant bit in 895A, in a fashion
1791          * similar to what is done in sym_set_workarounds().
1792          */
1793         pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1794         if (!(chip->features & FE_66MHZ) && (status_reg & PCI_STATUS_66MHZ)) {
1795                 status_reg = PCI_STATUS_66MHZ;
1796                 pci_write_config_word(pdev, PCI_STATUS, status_reg);
1797                 pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1798         }
1799 }
1800
1801 /**
1802  * sym2_io_slot_reset() - called when the pci bus has been reset.
1803  * @pdev: pointer to PCI device
1804  *
1805  * Restart the card from scratch.
1806  */
1807 static pci_ers_result_t sym2_io_slot_reset(struct pci_dev *pdev)
1808 {
1809         struct Scsi_Host *shost = pci_get_drvdata(pdev);
1810         struct sym_hcb *np = sym_get_hcb(shost);
1811
1812         printk(KERN_INFO "%s: recovering from a PCI slot reset\n",
1813                   sym_name(np));
1814
1815         if (pci_enable_device(pdev)) {
1816                 printk(KERN_ERR "%s: Unable to enable after PCI reset\n",
1817                         sym_name(np));
1818                 return PCI_ERS_RESULT_DISCONNECT;
1819         }
1820
1821         pci_set_master(pdev);
1822         enable_irq(pdev->irq);
1823
1824         /* If the chip can do Memory Write Invalidate, enable it */
1825         if (np->features & FE_WRIE) {
1826                 if (pci_set_mwi(pdev))
1827                         return PCI_ERS_RESULT_DISCONNECT;
1828         }
1829
1830         /* Perform work-arounds, analogous to sym_set_workarounds() */
1831         sym2_reset_workarounds(pdev);
1832
1833         /* Perform host reset only on one instance of the card */
1834         if (PCI_FUNC(pdev->devfn) == 0) {
1835                 if (sym_reset_scsi_bus(np, 0)) {
1836                         printk(KERN_ERR "%s: Unable to reset scsi host\n",
1837                                 sym_name(np));
1838                         return PCI_ERS_RESULT_DISCONNECT;
1839                 }
1840                 sym_start_up(shost, 1);
1841         }
1842
1843         return PCI_ERS_RESULT_RECOVERED;
1844 }
1845
1846 /**
1847  * sym2_io_resume() - resume normal ops after PCI reset
1848  * @pdev: pointer to PCI device
1849  *
1850  * Called when the error recovery driver tells us that its
1851  * OK to resume normal operation. Use completion to allow
1852  * halted scsi ops to resume.
1853  */
1854 static void sym2_io_resume(struct pci_dev *pdev)
1855 {
1856         struct Scsi_Host *shost = pci_get_drvdata(pdev);
1857         struct sym_data *sym_data = shost_priv(shost);
1858
1859         spin_lock_irq(shost->host_lock);
1860         if (sym_data->io_reset)
1861                 complete(sym_data->io_reset);
1862         spin_unlock_irq(shost->host_lock);
1863 }
1864
1865 static void sym2_get_signalling(struct Scsi_Host *shost)
1866 {
1867         struct sym_hcb *np = sym_get_hcb(shost);
1868         enum spi_signal_type type;
1869
1870         switch (np->scsi_mode) {
1871         case SMODE_SE:
1872                 type = SPI_SIGNAL_SE;
1873                 break;
1874         case SMODE_LVD:
1875                 type = SPI_SIGNAL_LVD;
1876                 break;
1877         case SMODE_HVD:
1878                 type = SPI_SIGNAL_HVD;
1879                 break;
1880         default:
1881                 type = SPI_SIGNAL_UNKNOWN;
1882                 break;
1883         }
1884         spi_signalling(shost) = type;
1885 }
1886
1887 static void sym2_set_offset(struct scsi_target *starget, int offset)
1888 {
1889         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1890         struct sym_hcb *np = sym_get_hcb(shost);
1891         struct sym_tcb *tp = &np->target[starget->id];
1892
1893         tp->tgoal.offset = offset;
1894         tp->tgoal.check_nego = 1;
1895 }
1896
1897 static void sym2_set_period(struct scsi_target *starget, int period)
1898 {
1899         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1900         struct sym_hcb *np = sym_get_hcb(shost);
1901         struct sym_tcb *tp = &np->target[starget->id];
1902
1903         /* have to have DT for these transfers, but DT will also
1904          * set width, so check that this is allowed */
1905         if (period <= np->minsync && spi_width(starget))
1906                 tp->tgoal.dt = 1;
1907
1908         tp->tgoal.period = period;
1909         tp->tgoal.check_nego = 1;
1910 }
1911
1912 static void sym2_set_width(struct scsi_target *starget, int width)
1913 {
1914         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1915         struct sym_hcb *np = sym_get_hcb(shost);
1916         struct sym_tcb *tp = &np->target[starget->id];
1917
1918         /* It is illegal to have DT set on narrow transfers.  If DT is
1919          * clear, we must also clear IU and QAS.  */
1920         if (width == 0)
1921                 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
1922
1923         tp->tgoal.width = width;
1924         tp->tgoal.check_nego = 1;
1925 }
1926
1927 static void sym2_set_dt(struct scsi_target *starget, int dt)
1928 {
1929         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1930         struct sym_hcb *np = sym_get_hcb(shost);
1931         struct sym_tcb *tp = &np->target[starget->id];
1932
1933         /* We must clear QAS and IU if DT is clear */
1934         if (dt)
1935                 tp->tgoal.dt = 1;
1936         else
1937                 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
1938         tp->tgoal.check_nego = 1;
1939 }
1940
1941 #if 0
1942 static void sym2_set_iu(struct scsi_target *starget, int iu)
1943 {
1944         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1945         struct sym_hcb *np = sym_get_hcb(shost);
1946         struct sym_tcb *tp = &np->target[starget->id];
1947
1948         if (iu)
1949                 tp->tgoal.iu = tp->tgoal.dt = 1;
1950         else
1951                 tp->tgoal.iu = 0;
1952         tp->tgoal.check_nego = 1;
1953 }
1954
1955 static void sym2_set_qas(struct scsi_target *starget, int qas)
1956 {
1957         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1958         struct sym_hcb *np = sym_get_hcb(shost);
1959         struct sym_tcb *tp = &np->target[starget->id];
1960
1961         if (qas)
1962                 tp->tgoal.dt = tp->tgoal.qas = 1;
1963         else
1964                 tp->tgoal.qas = 0;
1965         tp->tgoal.check_nego = 1;
1966 }
1967 #endif
1968
1969 static struct spi_function_template sym2_transport_functions = {
1970         .set_offset     = sym2_set_offset,
1971         .show_offset    = 1,
1972         .set_period     = sym2_set_period,
1973         .show_period    = 1,
1974         .set_width      = sym2_set_width,
1975         .show_width     = 1,
1976         .set_dt         = sym2_set_dt,
1977         .show_dt        = 1,
1978 #if 0
1979         .set_iu         = sym2_set_iu,
1980         .show_iu        = 1,
1981         .set_qas        = sym2_set_qas,
1982         .show_qas       = 1,
1983 #endif
1984         .get_signalling = sym2_get_signalling,
1985 };
1986
1987 static struct pci_device_id sym2_id_table[] = {
1988         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C810,
1989           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
1990         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C820,
1991           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
1992         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C825,
1993           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
1994         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C815,
1995           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
1996         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C810AP,
1997           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
1998         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860,
1999           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2000         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510,
2001           PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8,  0xffff00, 0UL },
2002         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896,
2003           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2004         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,
2005           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2006         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C885,
2007           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2008         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875,
2009           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2010         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C1510,
2011           PCI_ANY_ID, PCI_ANY_ID,  PCI_CLASS_STORAGE_SCSI<<8,  0xffff00, 0UL }, /* new */
2012         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C895A,
2013           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2014         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C875A,
2015           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2016         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_33,
2017           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2018         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_66,
2019           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2020         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875J,
2021           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2022         { 0, }
2023 };
2024
2025 MODULE_DEVICE_TABLE(pci, sym2_id_table);
2026
2027 static const struct pci_error_handlers sym2_err_handler = {
2028         .error_detected = sym2_io_error_detected,
2029         .mmio_enabled   = sym2_io_slot_dump,
2030         .slot_reset     = sym2_io_slot_reset,
2031         .resume         = sym2_io_resume,
2032 };
2033
2034 static struct pci_driver sym2_driver = {
2035         .name           = NAME53C8XX,
2036         .id_table       = sym2_id_table,
2037         .probe          = sym2_probe,
2038         .remove         = sym2_remove,
2039         .err_handler    = &sym2_err_handler,
2040 };
2041
2042 static int __init sym2_init(void)
2043 {
2044         int error;
2045
2046         sym2_setup_params();
2047         sym2_transport_template = spi_attach_transport(&sym2_transport_functions);
2048         if (!sym2_transport_template)
2049                 return -ENODEV;
2050
2051         error = pci_register_driver(&sym2_driver);
2052         if (error)
2053                 spi_release_transport(sym2_transport_template);
2054         return error;
2055 }
2056
2057 static void __exit sym2_exit(void)
2058 {
2059         pci_unregister_driver(&sym2_driver);
2060         spi_release_transport(sym2_transport_template);
2061 }
2062
2063 module_init(sym2_init);
2064 module_exit(sym2_exit);