drivers/scsi/sd.c

   1 /*
   2  *      sd.c Copyright (C) 1992 Drew Eckhardt
   3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
   4  *
   5  *      Linux scsi disk driver
   6  *              Initial versions: Drew Eckhardt
   7  *              Subsequent revisions: Eric Youngdale
   8  *      Modification history:
   9  *       - Drew Eckhardt <drew@colorado.edu> original
  10  *       - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
  11  *         outstanding request, and other enhancements.
  12  *         Support loadable low-level scsi drivers.
  13  *       - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
  14  *         eight major numbers.
  15  *       - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
  16  *       - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
  17  *         sd_init and cleanups.
  18  *       - Alex Davis <letmein@erols.com> Fix problem where partition info
  19  *         not being read in sd_open. Fix problem where removable media
  20  *         could be ejected after sd_open.
  21  *       - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
  22  *       - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
  23  *         <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
  24  *         Support 32k/1M disks.
  25  *
  26  *      Logging policy (needs CONFIG_SCSI_LOGGING defined):
  27  *       - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
  28  *       - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
  29  *       - entering sd_ioctl: SCSI_LOG_IOCTL level 1
  30  *       - entering other commands: SCSI_LOG_HLQUEUE level 3
  31  *      Note: when the logging level is set by the user, it must be greater
  32  *      than the level indicated above to trigger output.
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/fs.h>
  37 #include <linux/kernel.h>
  38 #include <linux/mm.h>
  39 #include <linux/bio.h>
  40 #include <linux/genhd.h>
  41 #include <linux/hdreg.h>
  42 #include <linux/errno.h>
  43 #include <linux/idr.h>
  44 #include <linux/interrupt.h>
  45 #include <linux/init.h>
  46 #include <linux/blkdev.h>
  47 #include <linux/blkpg.h>
  48 #include <linux/delay.h>
  49 #include <linux/mutex.h>
  50 #include <linux/string_helpers.h>
  51 #include <linux/async.h>
  52 #include <linux/slab.h>
  53 #include <linux/pm_runtime.h>
  54 #include <linux/pr.h>
  55 #include <linux/t10-pi.h>
  56 #include <linux/uaccess.h>
  57 #include <asm/unaligned.h>
  58
  59 #include <scsi/scsi.h>
  60 #include <scsi/scsi_cmnd.h>
  61 #include <scsi/scsi_dbg.h>
  62 #include <scsi/scsi_device.h>
  63 #include <scsi/scsi_driver.h>
  64 #include <scsi/scsi_eh.h>
  65 #include <scsi/scsi_host.h>
  66 #include <scsi/scsi_ioctl.h>
  67 #include <scsi/scsicam.h>
  68
  69 #include "sd.h"
  70 #include "scsi_priv.h"
  71 #include "scsi_logging.h"
  72
  73 MODULE_AUTHOR("Eric Youngdale");
  74 MODULE_DESCRIPTION("SCSI disk (sd) driver");
  75 MODULE_LICENSE("GPL");
  76
  77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
  78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
  79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
  80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
  81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
  82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
  83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
  84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
  85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
  86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
  87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
  88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
  89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
  90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
  91 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
  92 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
  93 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
  94 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
  95 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
  96 MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
  97
  98 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
  99 #define SD_MINORS       16
 100 #else
 101 #define SD_MINORS       0
 102 #endif
 103
 104 static void sd_config_discard(struct scsi_disk *, unsigned int);
 105 static void sd_config_write_same(struct scsi_disk *);
 106 static int  sd_revalidate_disk(struct gendisk *);
 107 static void sd_unlock_native_capacity(struct gendisk *disk);
 108 static int  sd_probe(struct device *);
 109 static int  sd_remove(struct device *);
 110 static void sd_shutdown(struct device *);
 111 static int sd_suspend_system(struct device *);
 112 static int sd_suspend_runtime(struct device *);
 113 static int sd_resume(struct device *);
 114 static void sd_rescan(struct device *);
 115 static int sd_init_command(struct scsi_cmnd *SCpnt);
 116 static void sd_uninit_command(struct scsi_cmnd *SCpnt);
 117 static int sd_done(struct scsi_cmnd *);
 118 static int sd_eh_action(struct scsi_cmnd *, int);
 119 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
 120 static void scsi_disk_release(struct device *cdev);
 121 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 122 static void sd_print_result(const struct scsi_disk *, const char *, int);
 123
 124 static DEFINE_SPINLOCK(sd_index_lock);
 125 static DEFINE_IDA(sd_index_ida);
 126
 127 /* This semaphore is used to mediate the 0->1 reference get in the
 128  * face of object destruction (i.e. we can't allow a get on an
 129  * object after last put) */
 130 static DEFINE_MUTEX(sd_ref_mutex);
 131
 132 static struct kmem_cache *sd_cdb_cache;
 133 static mempool_t *sd_cdb_pool;
 134
 135 static const char *sd_cache_types[] = {
 136         "write through", "none", "write back",
 137         "write back, no read (daft)"
 138 };
 139
 140 static void sd_set_flush_flag(struct scsi_disk *sdkp)
 141 {
 142         bool wc = false, fua = false;
 143
 144         if (sdkp->WCE) {
 145                 wc = true;
 146                 if (sdkp->DPOFUA)
 147                         fua = true;
 148         }
 149
 150         blk_queue_write_cache(sdkp->disk->queue, wc, fua);
 151 }
 152
 153 static ssize_t
 154 cache_type_store(struct device *dev, struct device_attribute *attr,
 155                  const char *buf, size_t count)
 156 {
 157         int i, ct = -1, rcd, wce, sp;
 158         struct scsi_disk *sdkp = to_scsi_disk(dev);
 159         struct scsi_device *sdp = sdkp->device;
 160         char buffer[64];
 161         char *buffer_data;
 162         struct scsi_mode_data data;
 163         struct scsi_sense_hdr sshdr;
 164         static const char temp[] = "temporary ";
 165         int len;
 166
 167         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 168                 /* no cache control on RBC devices; theoretically they
 169                  * can do it, but there's probably so many exceptions
 170                  * it's not worth the risk */
 171                 return -EINVAL;
 172
 173         if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
 174                 buf += sizeof(temp) - 1;
 175                 sdkp->cache_override = 1;
 176         } else {
 177                 sdkp->cache_override = 0;
 178         }
 179
 180         for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
 181                 len = strlen(sd_cache_types[i]);
 182                 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
 183                     buf[len] == '\n') {
 184                         ct = i;
 185                         break;
 186                 }
 187         }
 188         if (ct < 0)
 189                 return -EINVAL;
 190         rcd = ct & 0x01 ? 1 : 0;
 191         wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
 192
 193         if (sdkp->cache_override) {
 194                 sdkp->WCE = wce;
 195                 sdkp->RCD = rcd;
 196                 sd_set_flush_flag(sdkp);
 197                 return count;
 198         }
 199
 200         if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
 201                             SD_MAX_RETRIES, &data, NULL))
 202                 return -EINVAL;
 203         len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
 204                   data.block_descriptor_length);
 205         buffer_data = buffer + data.header_length +
 206                 data.block_descriptor_length;
 207         buffer_data[2] &= ~0x05;
 208         buffer_data[2] |= wce << 2 | rcd;
 209         sp = buffer_data[0] & 0x80 ? 1 : 0;
 210         buffer_data[0] &= ~0x80;
 211
 212         if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
 213                              SD_MAX_RETRIES, &data, &sshdr)) {
 214                 if (scsi_sense_valid(&sshdr))
 215                         sd_print_sense_hdr(sdkp, &sshdr);
 216                 return -EINVAL;
 217         }
 218         revalidate_disk(sdkp->disk);
 219         return count;
 220 }
 221
 222 static ssize_t
 223 manage_start_stop_show(struct device *dev, struct device_attribute *attr,
 224                        char *buf)
 225 {
 226         struct scsi_disk *sdkp = to_scsi_disk(dev);
 227         struct scsi_device *sdp = sdkp->device;
 228
 229         return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
 230 }
 231
 232 static ssize_t
 233 manage_start_stop_store(struct device *dev, struct device_attribute *attr,
 234                         const char *buf, size_t count)
 235 {
 236         struct scsi_disk *sdkp = to_scsi_disk(dev);
 237         struct scsi_device *sdp = sdkp->device;
 238
 239         if (!capable(CAP_SYS_ADMIN))
 240                 return -EACCES;
 241
 242         sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
 243
 244         return count;
 245 }
 246 static DEVICE_ATTR_RW(manage_start_stop);
 247
 248 static ssize_t
 249 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
 250 {
 251         struct scsi_disk *sdkp = to_scsi_disk(dev);
 252
 253         return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
 254 }
 255
 256 static ssize_t
 257 allow_restart_store(struct device *dev, struct device_attribute *attr,
 258                     const char *buf, size_t count)
 259 {
 260         struct scsi_disk *sdkp = to_scsi_disk(dev);
 261         struct scsi_device *sdp = sdkp->device;
 262
 263         if (!capable(CAP_SYS_ADMIN))
 264                 return -EACCES;
 265
 266         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 267                 return -EINVAL;
 268
 269         sdp->allow_restart = simple_strtoul(buf, NULL, 10);
 270
 271         return count;
 272 }
 273 static DEVICE_ATTR_RW(allow_restart);
 274
 275 static ssize_t
 276 cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
 277 {
 278         struct scsi_disk *sdkp = to_scsi_disk(dev);
 279         int ct = sdkp->RCD + 2*sdkp->WCE;
 280
 281         return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
 282 }
 283 static DEVICE_ATTR_RW(cache_type);
 284
 285 static ssize_t
 286 FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
 287 {
 288         struct scsi_disk *sdkp = to_scsi_disk(dev);
 289
 290         return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
 291 }
 292 static DEVICE_ATTR_RO(FUA);
 293
 294 static ssize_t
 295 protection_type_show(struct device *dev, struct device_attribute *attr,
 296                      char *buf)
 297 {
 298         struct scsi_disk *sdkp = to_scsi_disk(dev);
 299
 300         return snprintf(buf, 20, "%u\n", sdkp->protection_type);
 301 }
 302
 303 static ssize_t
 304 protection_type_store(struct device *dev, struct device_attribute *attr,
 305                       const char *buf, size_t count)
 306 {
 307         struct scsi_disk *sdkp = to_scsi_disk(dev);
 308         unsigned int val;
 309         int err;
 310
 311         if (!capable(CAP_SYS_ADMIN))
 312                 return -EACCES;
 313
 314         err = kstrtouint(buf, 10, &val);
 315
 316         if (err)
 317                 return err;
 318
 319         if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION)
 320                 sdkp->protection_type = val;
 321
 322         return count;
 323 }
 324 static DEVICE_ATTR_RW(protection_type);
 325
 326 static ssize_t
 327 protection_mode_show(struct device *dev, struct device_attribute *attr,
 328                      char *buf)
 329 {
 330         struct scsi_disk *sdkp = to_scsi_disk(dev);
 331         struct scsi_device *sdp = sdkp->device;
 332         unsigned int dif, dix;
 333
 334         dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
 335         dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
 336
 337         if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) {
 338                 dif = 0;
 339                 dix = 1;
 340         }
 341
 342         if (!dif && !dix)
 343                 return snprintf(buf, 20, "none\n");
 344
 345         return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
 346 }
 347 static DEVICE_ATTR_RO(protection_mode);
 348
 349 static ssize_t
 350 app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
 351 {
 352         struct scsi_disk *sdkp = to_scsi_disk(dev);
 353
 354         return snprintf(buf, 20, "%u\n", sdkp->ATO);
 355 }
 356 static DEVICE_ATTR_RO(app_tag_own);
 357
 358 static ssize_t
 359 thin_provisioning_show(struct device *dev, struct device_attribute *attr,
 360                        char *buf)
 361 {
 362         struct scsi_disk *sdkp = to_scsi_disk(dev);
 363
 364         return snprintf(buf, 20, "%u\n", sdkp->lbpme);
 365 }
 366 static DEVICE_ATTR_RO(thin_provisioning);
 367
 368 static const char *lbp_mode[] = {
 369         [SD_LBP_FULL]           = "full",
 370         [SD_LBP_UNMAP]          = "unmap",
 371         [SD_LBP_WS16]           = "writesame_16",
 372         [SD_LBP_WS10]           = "writesame_10",
 373         [SD_LBP_ZERO]           = "writesame_zero",
 374         [SD_LBP_DISABLE]        = "disabled",
 375 };
 376
 377 static ssize_t
 378 provisioning_mode_show(struct device *dev, struct device_attribute *attr,
 379                        char *buf)
 380 {
 381         struct scsi_disk *sdkp = to_scsi_disk(dev);
 382
 383         return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
 384 }
 385
 386 static ssize_t
 387 provisioning_mode_store(struct device *dev, struct device_attribute *attr,
 388                         const char *buf, size_t count)
 389 {
 390         struct scsi_disk *sdkp = to_scsi_disk(dev);
 391         struct scsi_device *sdp = sdkp->device;
 392
 393         if (!capable(CAP_SYS_ADMIN))
 394                 return -EACCES;
 395
 396         if (sd_is_zoned(sdkp)) {
 397                 sd_config_discard(sdkp, SD_LBP_DISABLE);
 398                 return count;
 399         }
 400
 401         if (sdp->type != TYPE_DISK)
 402                 return -EINVAL;
 403
 404         if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
 405                 sd_config_discard(sdkp, SD_LBP_UNMAP);
 406         else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
 407                 sd_config_discard(sdkp, SD_LBP_WS16);
 408         else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
 409                 sd_config_discard(sdkp, SD_LBP_WS10);
 410         else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
 411                 sd_config_discard(sdkp, SD_LBP_ZERO);
 412         else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
 413                 sd_config_discard(sdkp, SD_LBP_DISABLE);
 414         else
 415                 return -EINVAL;
 416
 417         return count;
 418 }
 419 static DEVICE_ATTR_RW(provisioning_mode);
 420
 421 static ssize_t
 422 max_medium_access_timeouts_show(struct device *dev,
 423                                 struct device_attribute *attr, char *buf)
 424 {
 425         struct scsi_disk *sdkp = to_scsi_disk(dev);
 426
 427         return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts);
 428 }
 429
 430 static ssize_t
 431 max_medium_access_timeouts_store(struct device *dev,
 432                                  struct device_attribute *attr, const char *buf,
 433                                  size_t count)
 434 {
 435         struct scsi_disk *sdkp = to_scsi_disk(dev);
 436         int err;
 437
 438         if (!capable(CAP_SYS_ADMIN))
 439                 return -EACCES;
 440
 441         err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
 442
 443         return err ? err : count;
 444 }
 445 static DEVICE_ATTR_RW(max_medium_access_timeouts);
 446
 447 static ssize_t
 448 max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
 449                            char *buf)
 450 {
 451         struct scsi_disk *sdkp = to_scsi_disk(dev);
 452
 453         return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
 454 }
 455
 456 static ssize_t
 457 max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
 458                             const char *buf, size_t count)
 459 {
 460         struct scsi_disk *sdkp = to_scsi_disk(dev);
 461         struct scsi_device *sdp = sdkp->device;
 462         unsigned long max;
 463         int err;
 464
 465         if (!capable(CAP_SYS_ADMIN))
 466                 return -EACCES;
 467
 468         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 469                 return -EINVAL;
 470
 471         err = kstrtoul(buf, 10, &max);
 472
 473         if (err)
 474                 return err;
 475
 476         if (max == 0)
 477                 sdp->no_write_same = 1;
 478         else if (max <= SD_MAX_WS16_BLOCKS) {
 479                 sdp->no_write_same = 0;
 480                 sdkp->max_ws_blocks = max;
 481         }
 482
 483         sd_config_write_same(sdkp);
 484
 485         return count;
 486 }
 487 static DEVICE_ATTR_RW(max_write_same_blocks);
 488
 489 static struct attribute *sd_disk_attrs[] = {
 490         &dev_attr_cache_type.attr,
 491         &dev_attr_FUA.attr,
 492         &dev_attr_allow_restart.attr,
 493         &dev_attr_manage_start_stop.attr,
 494         &dev_attr_protection_type.attr,
 495         &dev_attr_protection_mode.attr,
 496         &dev_attr_app_tag_own.attr,
 497         &dev_attr_thin_provisioning.attr,
 498         &dev_attr_provisioning_mode.attr,
 499         &dev_attr_max_write_same_blocks.attr,
 500         &dev_attr_max_medium_access_timeouts.attr,
 501         NULL,
 502 };
 503 ATTRIBUTE_GROUPS(sd_disk);
 504
 505 static struct class sd_disk_class = {
 506         .name           = "scsi_disk",
 507         .owner          = THIS_MODULE,
 508         .dev_release    = scsi_disk_release,
 509         .dev_groups     = sd_disk_groups,
 510 };
 511
 512 static const struct dev_pm_ops sd_pm_ops = {
 513         .suspend                = sd_suspend_system,
 514         .resume                 = sd_resume,
 515         .poweroff               = sd_suspend_system,
 516         .restore                = sd_resume,
 517         .runtime_suspend        = sd_suspend_runtime,
 518         .runtime_resume         = sd_resume,
 519 };
 520
 521 static struct scsi_driver sd_template = {
 522         .gendrv = {
 523                 .name           = "sd",
 524                 .owner          = THIS_MODULE,
 525                 .probe          = sd_probe,
 526                 .remove         = sd_remove,
 527                 .shutdown       = sd_shutdown,
 528                 .pm             = &sd_pm_ops,
 529         },
 530         .rescan                 = sd_rescan,
 531         .init_command           = sd_init_command,
 532         .uninit_command         = sd_uninit_command,
 533         .done                   = sd_done,
 534         .eh_action              = sd_eh_action,
 535 };
 536
 537 /*
 538  * Dummy kobj_map->probe function.
 539  * The default ->probe function will call modprobe, which is
 540  * pointless as this module is already loaded.
 541  */
 542 static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data)
 543 {
 544         return NULL;
 545 }
 546
 547 /*
 548  * Device no to disk mapping:
 549  *
 550  *       major         disc2     disc  p1
 551  *   |............|.............|....|....| <- dev_t
 552  *    31        20 19          8 7  4 3  0
 553  *
 554  * Inside a major, we have 16k disks, however mapped non-
 555  * contiguously. The first 16 disks are for major0, the next
 556  * ones with major1, ... Disk 256 is for major0 again, disk 272
 557  * for major1, ...
 558  * As we stay compatible with our numbering scheme, we can reuse
 559  * the well-know SCSI majors 8, 65--71, 136--143.
 560  */
 561 static int sd_major(int major_idx)
 562 {
 563         switch (major_idx) {
 564         case 0:
 565                 return SCSI_DISK0_MAJOR;
 566         case 1 ... 7:
 567                 return SCSI_DISK1_MAJOR + major_idx - 1;
 568         case 8 ... 15:
 569                 return SCSI_DISK8_MAJOR + major_idx - 8;
 570         default:
 571                 BUG();
 572                 return 0;       /* shut up gcc */
 573         }
 574 }
 575
 576 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
 577 {
 578         struct scsi_disk *sdkp = NULL;
 579
 580         mutex_lock(&sd_ref_mutex);
 581
 582         if (disk->private_data) {
 583                 sdkp = scsi_disk(disk);
 584                 if (scsi_device_get(sdkp->device) == 0)
 585                         get_device(&sdkp->dev);
 586                 else
 587                         sdkp = NULL;
 588         }
 589         mutex_unlock(&sd_ref_mutex);
 590         return sdkp;
 591 }
 592
 593 static void scsi_disk_put(struct scsi_disk *sdkp)
 594 {
 595         struct scsi_device *sdev = sdkp->device;
 596
 597         mutex_lock(&sd_ref_mutex);
 598         put_device(&sdkp->dev);
 599         scsi_device_put(sdev);
 600         mutex_unlock(&sd_ref_mutex);
 601 }
 602
 603 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
 604                                            unsigned int dix, unsigned int dif)
 605 {
 606         struct bio *bio = scmd->request->bio;
 607         unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
 608         unsigned int protect = 0;
 609
 610         if (dix) {                              /* DIX Type 0, 1, 2, 3 */
 611                 if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
 612                         scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
 613
 614                 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
 615                         scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
 616         }
 617
 618         if (dif != T10_PI_TYPE3_PROTECTION) {   /* DIX/DIF Type 0, 1, 2 */
 619                 scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
 620
 621                 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
 622                         scmd->prot_flags |= SCSI_PROT_REF_CHECK;
 623         }
 624
 625         if (dif) {                              /* DIX/DIF Type 1, 2, 3 */
 626                 scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
 627
 628                 if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
 629                         protect = 3 << 5;       /* Disable target PI checking */
 630                 else
 631                         protect = 1 << 5;       /* Enable target PI checking */
 632         }
 633
 634         scsi_set_prot_op(scmd, prot_op);
 635         scsi_set_prot_type(scmd, dif);
 636         scmd->prot_flags &= sd_prot_flag_mask(prot_op);
 637
 638         return protect;
 639 }
 640
 641 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 642 {
 643         struct request_queue *q = sdkp->disk->queue;
 644         unsigned int logical_block_size = sdkp->device->sector_size;
 645         unsigned int max_blocks = 0;
 646
 647         q->limits.discard_zeroes_data = 0;
 648
 649         /*
 650          * When LBPRZ is reported, discard alignment and granularity
 651          * must be fixed to the logical block size. Otherwise the block
 652          * layer will drop misaligned portions of the request which can
 653          * lead to data corruption. If LBPRZ is not set, we honor the
 654          * device preference.
 655          */
 656         if (sdkp->lbprz) {
 657                 q->limits.discard_alignment = 0;
 658                 q->limits.discard_granularity = logical_block_size;
 659         } else {
 660                 q->limits.discard_alignment = sdkp->unmap_alignment *
 661                         logical_block_size;
 662                 q->limits.discard_granularity =
 663                         max(sdkp->physical_block_size,
 664                             sdkp->unmap_granularity * logical_block_size);
 665         }
 666
 667         sdkp->provisioning_mode = mode;
 668
 669         switch (mode) {
 670
 671         case SD_LBP_DISABLE:
 672                 blk_queue_max_discard_sectors(q, 0);
 673                 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
 674                 return;
 675
 676         case SD_LBP_UNMAP:
 677                 max_blocks = min_not_zero(sdkp->max_unmap_blocks,
 678                                           (u32)SD_MAX_WS16_BLOCKS);
 679                 break;
 680
 681         case SD_LBP_WS16:
 682                 max_blocks = min_not_zero(sdkp->max_ws_blocks,
 683                                           (u32)SD_MAX_WS16_BLOCKS);
 684                 q->limits.discard_zeroes_data = sdkp->lbprz;
 685                 break;
 686
 687         case SD_LBP_WS10:
 688                 max_blocks = min_not_zero(sdkp->max_ws_blocks,
 689                                           (u32)SD_MAX_WS10_BLOCKS);
 690                 q->limits.discard_zeroes_data = sdkp->lbprz;
 691                 break;
 692
 693         case SD_LBP_ZERO:
 694                 max_blocks = min_not_zero(sdkp->max_ws_blocks,
 695                                           (u32)SD_MAX_WS10_BLOCKS);
 696                 q->limits.discard_zeroes_data = 1;
 697                 break;
 698         }
 699
 700         blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
 701         queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
 702 }
 703
 704 /**
 705  * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
 706  * @sdp: scsi device to operate on
 707  * @rq: Request to prepare
 708  *
 709  * Will issue either UNMAP or WRITE SAME(16) depending on preference
 710  * indicated by target device.
 711  **/
 712 static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd)
 713 {
 714         struct request *rq = cmd->request;
 715         struct scsi_device *sdp = cmd->device;
 716         struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 717         sector_t sector = blk_rq_pos(rq);
 718         unsigned int nr_sectors = blk_rq_sectors(rq);
 719         unsigned int len;
 720         int ret;
 721         char *buf;
 722         struct page *page;
 723
 724         sector >>= ilog2(sdp->sector_size) - 9;
 725         nr_sectors >>= ilog2(sdp->sector_size) - 9;
 726
 727         page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
 728         if (!page)
 729                 return BLKPREP_DEFER;
 730
 731         switch (sdkp->provisioning_mode) {
 732         case SD_LBP_UNMAP:
 733                 buf = page_address(page);
 734
 735                 cmd->cmd_len = 10;
 736                 cmd->cmnd[0] = UNMAP;
 737                 cmd->cmnd[8] = 24;
 738
 739                 put_unaligned_be16(6 + 16, &buf[0]);
 740                 put_unaligned_be16(16, &buf[2]);
 741                 put_unaligned_be64(sector, &buf[8]);
 742                 put_unaligned_be32(nr_sectors, &buf[16]);
 743
 744                 len = 24;
 745                 break;
 746
 747         case SD_LBP_WS16:
 748                 cmd->cmd_len = 16;
 749                 cmd->cmnd[0] = WRITE_SAME_16;
 750                 cmd->cmnd[1] = 0x8; /* UNMAP */
 751                 put_unaligned_be64(sector, &cmd->cmnd[2]);
 752                 put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
 753
 754                 len = sdkp->device->sector_size;
 755                 break;
 756
 757         case SD_LBP_WS10:
 758         case SD_LBP_ZERO:
 759                 cmd->cmd_len = 10;
 760                 cmd->cmnd[0] = WRITE_SAME;
 761                 if (sdkp->provisioning_mode == SD_LBP_WS10)
 762                         cmd->cmnd[1] = 0x8; /* UNMAP */
 763                 put_unaligned_be32(sector, &cmd->cmnd[2]);
 764                 put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
 765
 766                 len = sdkp->device->sector_size;
 767                 break;
 768
 769         default:
 770                 ret = BLKPREP_INVALID;
 771                 goto out;
 772         }
 773
 774         rq->timeout = SD_TIMEOUT;
 775
 776         cmd->transfersize = len;
 777         cmd->allowed = SD_MAX_RETRIES;
 778
 779         rq->special_vec.bv_page = page;
 780         rq->special_vec.bv_offset = 0;
 781         rq->special_vec.bv_len = len;
 782
 783         rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 784         scsi_req(rq)->resid_len = len;
 785
 786         ret = scsi_init_io(cmd);
 787 out:
 788         if (ret != BLKPREP_OK)
 789                 __free_page(page);
 790         return ret;
 791 }
 792
 793 static void sd_config_write_same(struct scsi_disk *sdkp)
 794 {
 795         struct request_queue *q = sdkp->disk->queue;
 796         unsigned int logical_block_size = sdkp->device->sector_size;
 797
 798         if (sdkp->device->no_write_same) {
 799                 sdkp->max_ws_blocks = 0;
 800                 goto out;
 801         }
 802
 803         /* Some devices can not handle block counts above 0xffff despite
 804          * supporting WRITE SAME(16). Consequently we default to 64k
 805          * blocks per I/O unless the device explicitly advertises a
 806          * bigger limit.
 807          */
 808         if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
 809                 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
 810                                                    (u32)SD_MAX_WS16_BLOCKS);
 811         else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
 812                 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
 813                                                    (u32)SD_MAX_WS10_BLOCKS);
 814         else {
 815                 sdkp->device->no_write_same = 1;
 816                 sdkp->max_ws_blocks = 0;
 817         }
 818
 819 out:
 820         blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
 821                                          (logical_block_size >> 9));
 822 }
 823
 824 /**
 825  * sd_setup_write_same_cmnd - write the same data to multiple blocks
 826  * @cmd: command to prepare
 827  *
 828  * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
 829  * preference indicated by target device.
 830  **/
 831 static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 832 {
 833         struct request *rq = cmd->request;
 834         struct scsi_device *sdp = cmd->device;
 835         struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 836         struct bio *bio = rq->bio;
 837         sector_t sector = blk_rq_pos(rq);
 838         unsigned int nr_sectors = blk_rq_sectors(rq);
 839         unsigned int nr_bytes = blk_rq_bytes(rq);
 840         int ret;
 841
 842         if (sdkp->device->no_write_same)
 843                 return BLKPREP_INVALID;
 844
 845         BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
 846
 847         if (sd_is_zoned(sdkp)) {
 848                 ret = sd_zbc_setup_write_cmnd(cmd);
 849                 if (ret != BLKPREP_OK)
 850                         return ret;
 851         }
 852
 853         sector >>= ilog2(sdp->sector_size) - 9;
 854         nr_sectors >>= ilog2(sdp->sector_size) - 9;
 855
 856         rq->timeout = SD_WRITE_SAME_TIMEOUT;
 857
 858         if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
 859                 cmd->cmd_len = 16;
 860                 cmd->cmnd[0] = WRITE_SAME_16;
 861                 put_unaligned_be64(sector, &cmd->cmnd[2]);
 862                 put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
 863         } else {
 864                 cmd->cmd_len = 10;
 865                 cmd->cmnd[0] = WRITE_SAME;
 866                 put_unaligned_be32(sector, &cmd->cmnd[2]);
 867                 put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
 868         }
 869
 870         cmd->transfersize = sdp->sector_size;
 871         cmd->allowed = SD_MAX_RETRIES;
 872
 873         /*
 874          * For WRITE SAME the data transferred via the DATA OUT buffer is
 875          * different from the amount of data actually written to the target.
 876          *
 877          * We set up __data_len to the amount of data transferred via the
 878          * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
 879          * to transfer a single sector of data first, but then reset it to
 880          * the amount of data to be written right after so that the I/O path
 881          * knows how much to actually write.
 882          */
 883         rq->__data_len = sdp->sector_size;
 884         ret = scsi_init_io(cmd);
 885         rq->__data_len = nr_bytes;
 886         return ret;
 887 }
 888
 889 static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 890 {
 891         struct request *rq = cmd->request;
 892
 893         /* flush requests don't perform I/O, zero the S/G table */
 894         memset(&cmd->sdb, 0, sizeof(cmd->sdb));
 895
 896         cmd->cmnd[0] = SYNCHRONIZE_CACHE;
 897         cmd->cmd_len = 10;
 898         cmd->transfersize = 0;
 899         cmd->allowed = SD_MAX_RETRIES;
 900
 901         rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
 902         return BLKPREP_OK;
 903 }
 904
 905 static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 906 {
 907         struct request *rq = SCpnt->request;
 908         struct scsi_device *sdp = SCpnt->device;
 909         struct gendisk *disk = rq->rq_disk;
 910         struct scsi_disk *sdkp = scsi_disk(disk);
 911         sector_t block = blk_rq_pos(rq);
 912         sector_t threshold;
 913         unsigned int this_count = blk_rq_sectors(rq);
 914         unsigned int dif, dix;
 915         bool zoned_write = sd_is_zoned(sdkp) && rq_data_dir(rq) == WRITE;
 916         int ret;
 917         unsigned char protect;
 918
 919         if (zoned_write) {
 920                 ret = sd_zbc_setup_write_cmnd(SCpnt);
 921                 if (ret != BLKPREP_OK)
 922                         return ret;
 923         }
 924
 925         ret = scsi_init_io(SCpnt);
 926         if (ret != BLKPREP_OK)
 927                 goto out;
 928         SCpnt = rq->special;
 929
 930         /* from here on until we're complete, any goto out
 931          * is used for a killable error condition */
 932         ret = BLKPREP_KILL;
 933
 934         SCSI_LOG_HLQUEUE(1,
 935                 scmd_printk(KERN_INFO, SCpnt,
 936                         "%s: block=%llu, count=%d\n",
 937                         __func__, (unsigned long long)block, this_count));
 938
 939         if (!sdp || !scsi_device_online(sdp) ||
 940             block + blk_rq_sectors(rq) > get_capacity(disk)) {
 941                 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
 942                                                 "Finishing %u sectors\n",
 943                                                 blk_rq_sectors(rq)));
 944                 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
 945                                                 "Retry with 0x%p\n", SCpnt));
 946                 goto out;
 947         }
 948
 949         if (sdp->changed) {
 950                 /*
 951                  * quietly refuse to do anything to a changed disc until
 952                  * the changed bit has been reset
 953                  */
 954                 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
 955                 goto out;
 956         }
 957
 958         /*
 959          * Some SD card readers can't handle multi-sector accesses which touch
 960          * the last one or two hardware sectors.  Split accesses as needed.
 961          */
 962         threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
 963                 (sdp->sector_size / 512);
 964
 965         if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
 966                 if (block < threshold) {
 967                         /* Access up to the threshold but not beyond */
 968                         this_count = threshold - block;
 969                 } else {
 970                         /* Access only a single hardware sector */
 971                         this_count = sdp->sector_size / 512;
 972                 }
 973         }
 974
 975         SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
 976                                         (unsigned long long)block));
 977
 978         /*
 979          * If we have a 1K hardware sectorsize, prevent access to single
 980          * 512 byte sectors.  In theory we could handle this - in fact
 981          * the scsi cdrom driver must be able to handle this because
 982          * we typically use 1K blocksizes, and cdroms typically have
 983          * 2K hardware sectorsizes.  Of course, things are simpler
 984          * with the cdrom, since it is read-only.  For performance
 985          * reasons, the filesystems should be able to handle this
 986          * and not force the scsi disk driver to use bounce buffers
 987          * for this.
 988          */
 989         if (sdp->sector_size == 1024) {
 990                 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
 991                         scmd_printk(KERN_ERR, SCpnt,
 992                                     "Bad block number requested\n");
 993                         goto out;
 994                 } else {
 995                         block = block >> 1;
 996                         this_count = this_count >> 1;
 997                 }
 998         }
 999         if (sdp->sector_size == 2048) {
1000                 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
1001                         scmd_printk(KERN_ERR, SCpnt,
1002                                     "Bad block number requested\n");
1003                         goto out;
1004                 } else {
1005                         block = block >> 2;
1006                         this_count = this_count >> 2;
1007                 }
1008         }
1009         if (sdp->sector_size == 4096) {
1010                 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
1011                         scmd_printk(KERN_ERR, SCpnt,
1012                                     "Bad block number requested\n");
1013                         goto out;
1014                 } else {
1015                         block = block >> 3;
1016                         this_count = this_count >> 3;
1017                 }
1018         }
1019         if (rq_data_dir(rq) == WRITE) {
1020                 SCpnt->cmnd[0] = WRITE_6;
1021
1022                 if (blk_integrity_rq(rq))
1023                         sd_dif_prepare(SCpnt);
1024
1025         } else if (rq_data_dir(rq) == READ) {
1026                 SCpnt->cmnd[0] = READ_6;
1027         } else {
1028                 scmd_printk(KERN_ERR, SCpnt, "Unknown command %d\n", req_op(rq));
1029                 goto out;
1030         }
1031
1032         SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1033                                         "%s %d/%u 512 byte blocks.\n",
1034                                         (rq_data_dir(rq) == WRITE) ?
1035                                         "writing" : "reading", this_count,
1036                                         blk_rq_sectors(rq)));
1037
1038         dix = scsi_prot_sg_count(SCpnt);
1039         dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type);
1040
1041         if (dif || dix)
1042                 protect = sd_setup_protect_cmnd(SCpnt, dix, dif);
1043         else
1044                 protect = 0;
1045
1046         if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
1047                 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
1048
1049                 if (unlikely(SCpnt->cmnd == NULL)) {
1050                         ret = BLKPREP_DEFER;
1051                         goto out;
1052                 }
1053
1054                 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
1055                 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
1056                 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
1057                 SCpnt->cmnd[7] = 0x18;
1058                 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
1059                 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1060
1061                 /* LBA */
1062                 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1063                 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1064                 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1065                 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1066                 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
1067                 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
1068                 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
1069                 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
1070
1071                 /* Expected Indirect LBA */
1072                 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
1073                 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
1074                 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
1075                 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
1076
1077                 /* Transfer length */
1078                 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
1079                 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
1080                 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
1081                 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
1082         } else if (sdp->use_16_for_rw || (this_count > 0xffff)) {
1083                 SCpnt->cmnd[0] += READ_16 - READ_6;
1084                 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1085                 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1086                 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1087                 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1088                 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1089                 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
1090                 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
1091                 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
1092                 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
1093                 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
1094                 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
1095                 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
1096                 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
1097                 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
1098         } else if ((this_count > 0xff) || (block > 0x1fffff) ||
1099                    scsi_device_protection(SCpnt->device) ||
1100                    SCpnt->device->use_10_for_rw) {
1101                 SCpnt->cmnd[0] += READ_10 - READ_6;
1102                 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1103                 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
1104                 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
1105                 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
1106                 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
1107                 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
1108                 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
1109                 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
1110         } else {
1111                 if (unlikely(rq->cmd_flags & REQ_FUA)) {
1112                         /*
1113                          * This happens only if this drive failed
1114                          * 10byte rw command with ILLEGAL_REQUEST
1115                          * during operation and thus turned off
1116                          * use_10_for_rw.
1117                          */
1118                         scmd_printk(KERN_ERR, SCpnt,
1119                                     "FUA write on READ/WRITE(6) drive\n");
1120                         goto out;
1121                 }
1122
1123                 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
1124                 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
1125                 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
1126                 SCpnt->cmnd[4] = (unsigned char) this_count;
1127                 SCpnt->cmnd[5] = 0;
1128         }
1129         SCpnt->sdb.length = this_count * sdp->sector_size;
1130
1131         /*
1132          * We shouldn't disconnect in the middle of a sector, so with a dumb
1133          * host adapter, it's safe to assume that we can at least transfer
1134          * this many bytes between each connect / disconnect.
1135          */
1136         SCpnt->transfersize = sdp->sector_size;
1137         SCpnt->underflow = this_count << 9;
1138         SCpnt->allowed = SD_MAX_RETRIES;
1139
1140         /*
1141          * This indicates that the command is ready from our end to be
1142          * queued.
1143          */
1144         ret = BLKPREP_OK;
1145  out:
1146         if (zoned_write && ret != BLKPREP_OK)
1147                 sd_zbc_cancel_write_cmnd(SCpnt);
1148
1149         return ret;
1150 }
1151
1152 static int sd_init_command(struct scsi_cmnd *cmd)
1153 {
1154         struct request *rq = cmd->request;
1155
1156         switch (req_op(rq)) {
1157         case REQ_OP_DISCARD:
1158                 return sd_setup_discard_cmnd(cmd);
1159         case REQ_OP_WRITE_SAME:
1160                 return sd_setup_write_same_cmnd(cmd);
1161         case REQ_OP_FLUSH:
1162                 return sd_setup_flush_cmnd(cmd);
1163         case REQ_OP_READ:
1164         case REQ_OP_WRITE:
1165                 return sd_setup_read_write_cmnd(cmd);
1166         case REQ_OP_ZONE_REPORT:
1167                 return sd_zbc_setup_report_cmnd(cmd);
1168         case REQ_OP_ZONE_RESET:
1169                 return sd_zbc_setup_reset_cmnd(cmd);
1170         default:
1171                 BUG();
1172         }
1173 }
1174
1175 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
1176 {
1177         struct request *rq = SCpnt->request;
1178
1179         if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
1180                 __free_page(rq->special_vec.bv_page);
1181
1182         if (SCpnt->cmnd != scsi_req(rq)->cmd) {
1183                 mempool_free(SCpnt->cmnd, sd_cdb_pool);
1184                 SCpnt->cmnd = NULL;
1185                 SCpnt->cmd_len = 0;
1186         }
1187 }
1188
1189 /**
1190  *      sd_open - open a scsi disk device
1191  *      @inode: only i_rdev member may be used
1192  *      @filp: only f_mode and f_flags may be used
1193  *
1194  *      Returns 0 if successful. Returns a negated errno value in case
1195  *      of error.
1196  *
1197  *      Note: This can be called from a user context (e.g. fsck(1) )
1198  *      or from within the kernel (e.g. as a result of a mount(1) ).
1199  *      In the latter case @inode and @filp carry an abridged amount
1200  *      of information as noted above.
1201  *
1202  *      Locking: called with bdev->bd_mutex held.
1203  **/
1204 static int sd_open(struct block_device *bdev, fmode_t mode)
1205 {
1206         struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
1207         struct scsi_device *sdev;
1208         int retval;
1209
1210         if (!sdkp)
1211                 return -ENXIO;
1212
1213         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1214
1215         sdev = sdkp->device;
1216
1217         /*
1218          * If the device is in error recovery, wait until it is done.
1219          * If the device is offline, then disallow any access to it.
1220          */
1221         retval = -ENXIO;
1222         if (!scsi_block_when_processing_errors(sdev))
1223                 goto error_out;
1224
1225         if (sdev->removable || sdkp->write_prot)
1226                 check_disk_change(bdev);
1227
1228         /*
1229          * If the drive is empty, just let the open fail.
1230          */
1231         retval = -ENOMEDIUM;
1232         if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1233                 goto error_out;
1234
1235         /*
1236          * If the device has the write protect tab set, have the open fail
1237          * if the user expects to be able to write to the thing.
1238          */
1239         retval = -EROFS;
1240         if (sdkp->write_prot && (mode & FMODE_WRITE))
1241                 goto error_out;
1242
1243         /*
1244          * It is possible that the disk changing stuff resulted in
1245          * the device being taken offline.  If this is the case,
1246          * report this to the user, and don't pretend that the
1247          * open actually succeeded.
1248          */
1249         retval = -ENXIO;
1250         if (!scsi_device_online(sdev))
1251                 goto error_out;
1252
1253         if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1254                 if (scsi_block_when_processing_errors(sdev))
1255                         scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1256         }
1257
1258         return 0;
1259
1260 error_out:
1261         scsi_disk_put(sdkp);
1262         return retval;
1263 }
1264
1265 /**
1266  *      sd_release - invoked when the (last) close(2) is called on this
1267  *      scsi disk.
1268  *      @inode: only i_rdev member may be used
1269  *      @filp: only f_mode and f_flags may be used
1270  *
1271  *      Returns 0.
1272  *
1273  *      Note: may block (uninterruptible) if error recovery is underway
1274  *      on this disk.
1275  *
1276  *      Locking: called with bdev->bd_mutex held.
1277  **/
1278 static void sd_release(struct gendisk *disk, fmode_t mode)
1279 {
1280         struct scsi_disk *sdkp = scsi_disk(disk);
1281         struct scsi_device *sdev = sdkp->device;
1282
1283         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1284
1285         if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1286                 if (scsi_block_when_processing_errors(sdev))
1287                         scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1288         }
1289
1290         /*
1291          * XXX and what if there are packets in flight and this close()
1292          * XXX is followed by a "rmmod sd_mod"?
1293          */
1294
1295         scsi_disk_put(sdkp);
1296 }
1297
1298 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1299 {
1300         struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1301         struct scsi_device *sdp = sdkp->device;
1302         struct Scsi_Host *host = sdp->host;
1303         sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
1304         int diskinfo[4];
1305
1306         /* default to most commonly used values */
1307         diskinfo[0] = 0x40;     /* 1 << 6 */
1308         diskinfo[1] = 0x20;     /* 1 << 5 */
1309         diskinfo[2] = capacity >> 11;
1310
1311         /* override with calculated, extended default, or driver values */
1312         if (host->hostt->bios_param)
1313                 host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
1314         else
1315                 scsicam_bios_param(bdev, capacity, diskinfo);
1316
1317         geo->heads = diskinfo[0];
1318         geo->sectors = diskinfo[1];
1319         geo->cylinders = diskinfo[2];
1320         return 0;
1321 }
1322
1323 /**
1324  *      sd_ioctl - process an ioctl
1325  *      @inode: only i_rdev/i_bdev members may be used
1326  *      @filp: only f_mode and f_flags may be used
1327  *      @cmd: ioctl command number
1328  *      @arg: this is third argument given to ioctl(2) system call.
1329  *      Often contains a pointer.
1330  *
1331  *      Returns 0 if successful (some ioctls return positive numbers on
1332  *      success as well). Returns a negated errno value in case of error.
1333  *
1334  *      Note: most ioctls are forward onto the block subsystem or further
1335  *      down in the scsi subsystem.
1336  **/
1337 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1338                     unsigned int cmd, unsigned long arg)
1339 {
1340         struct gendisk *disk = bdev->bd_disk;
1341         struct scsi_disk *sdkp = scsi_disk(disk);
1342         struct scsi_device *sdp = sdkp->device;
1343         void __user *p = (void __user *)arg;
1344         int error;
1345
1346         SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1347                                     "cmd=0x%x\n", disk->disk_name, cmd));
1348
1349         error = scsi_verify_blk_ioctl(bdev, cmd);
1350         if (error < 0)
1351                 return error;
1352
1353         /*
1354          * If we are in the middle of error recovery, don't let anyone
1355          * else try and use this device.  Also, if error recovery fails, it
1356          * may try and take the device offline, in which case all further
1357          * access to the device is prohibited.
1358          */
1359         error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
1360                         (mode & FMODE_NDELAY) != 0);
1361         if (error)
1362                 goto out;
1363
1364         /*
1365          * Send SCSI addressing ioctls directly to mid level, send other
1366          * ioctls to block level and then onto mid level if they can't be
1367          * resolved.
1368          */
1369         switch (cmd) {
1370                 case SCSI_IOCTL_GET_IDLUN:
1371                 case SCSI_IOCTL_GET_BUS_NUMBER:
1372                         error = scsi_ioctl(sdp, cmd, p);
1373                         break;
1374                 default:
1375                         error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1376                         if (error != -ENOTTY)
1377                                 break;
1378                         error = scsi_ioctl(sdp, cmd, p);
1379                         break;
1380         }
1381 out:
1382         return error;
1383 }
1384
1385 static void set_media_not_present(struct scsi_disk *sdkp)
1386 {
1387         if (sdkp->media_present)
1388                 sdkp->device->changed = 1;
1389
1390         if (sdkp->device->removable) {
1391                 sdkp->media_present = 0;
1392                 sdkp->capacity = 0;
1393         }
1394 }
1395
1396 static int media_not_present(struct scsi_disk *sdkp,
1397                              struct scsi_sense_hdr *sshdr)
1398 {
1399         if (!scsi_sense_valid(sshdr))
1400                 return 0;
1401
1402         /* not invoked for commands that could return deferred errors */
1403         switch (sshdr->sense_key) {
1404         case UNIT_ATTENTION:
1405         case NOT_READY:
1406                 /* medium not present */
1407                 if (sshdr->asc == 0x3A) {
1408                         set_media_not_present(sdkp);
1409                         return 1;
1410                 }
1411         }
1412         return 0;
1413 }
1414
1415 /**
1416  *      sd_check_events - check media events
1417  *      @disk: kernel device descriptor
1418  *      @clearing: disk events currently being cleared
1419  *
1420  *      Returns mask of DISK_EVENT_*.
1421  *
1422  *      Note: this function is invoked from the block subsystem.
1423  **/
1424 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1425 {
1426         struct scsi_disk *sdkp = scsi_disk_get(disk);
1427         struct scsi_device *sdp;
1428         int retval;
1429
1430         if (!sdkp)
1431                 return 0;
1432
1433         sdp = sdkp->device;
1434         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1435
1436         /*
1437          * If the device is offline, don't send any commands - just pretend as
1438          * if the command failed.  If the device ever comes back online, we
1439          * can deal with it then.  It is only because of unrecoverable errors
1440          * that we would ever take a device offline in the first place.
1441          */
1442         if (!scsi_device_online(sdp)) {
1443                 set_media_not_present(sdkp);
1444                 goto out;
1445         }
1446
1447         /*
1448          * Using TEST_UNIT_READY enables differentiation between drive with
1449          * no cartridge loaded - NOT READY, drive with changed cartridge -
1450          * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1451          *
1452          * Drives that auto spin down. eg iomega jaz 1G, will be started
1453          * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1454          * sd_revalidate() is called.
1455          */
1456         if (scsi_block_when_processing_errors(sdp)) {
1457                 struct scsi_sense_hdr sshdr = { 0, };
1458
1459                 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1460                                               &sshdr);
1461
1462                 /* failed to execute TUR, assume media not present */
1463                 if (host_byte(retval)) {
1464                         set_media_not_present(sdkp);
1465                         goto out;
1466                 }
1467
1468                 if (media_not_present(sdkp, &sshdr))
1469                         goto out;
1470         }
1471
1472         /*
1473          * For removable scsi disk we have to recognise the presence
1474          * of a disk in the drive.
1475          */
1476         if (!sdkp->media_present)
1477                 sdp->changed = 1;
1478         sdkp->media_present = 1;
1479 out:
1480         /*
1481          * sdp->changed is set under the following conditions:
1482          *
1483          *      Medium present state has changed in either direction.
1484          *      Device has indicated UNIT_ATTENTION.
1485          */
1486         retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1487         sdp->changed = 0;
1488         scsi_disk_put(sdkp);
1489         return retval;
1490 }
1491
1492 static int sd_sync_cache(struct scsi_disk *sdkp)
1493 {
1494         int retries, res;
1495         struct scsi_device *sdp = sdkp->device;
1496         const int timeout = sdp->request_queue->rq_timeout
1497                 * SD_FLUSH_TIMEOUT_MULTIPLIER;
1498         struct scsi_sense_hdr sshdr;
1499
1500         if (!scsi_device_online(sdp))
1501                 return -ENODEV;
1502
1503         for (retries = 3; retries > 0; --retries) {
1504                 unsigned char cmd[10] = { 0 };
1505
1506                 cmd[0] = SYNCHRONIZE_CACHE;
1507                 /*
1508                  * Leave the rest of the command zero to indicate
1509                  * flush everything.
1510                  */
1511                 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
1512                                 timeout, SD_MAX_RETRIES, 0, RQF_PM, NULL);
1513                 if (res == 0)
1514                         break;
1515         }
1516
1517         if (res) {
1518                 sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
1519
1520                 if (driver_byte(res) & DRIVER_SENSE)
1521                         sd_print_sense_hdr(sdkp, &sshdr);
1522                 /* we need to evaluate the error return  */
1523                 if (scsi_sense_valid(&sshdr) &&
1524                         (sshdr.asc == 0x3a ||   /* medium not present */
1525                          sshdr.asc == 0x20))    /* invalid command */
1526                                 /* this is no error here */
1527                                 return 0;
1528
1529                 switch (host_byte(res)) {
1530                 /* ignore errors due to racing a disconnection */
1531                 case DID_BAD_TARGET:
1532                 case DID_NO_CONNECT:
1533                         return 0;
1534                 /* signal the upper layer it might try again */
1535                 case DID_BUS_BUSY:
1536                 case DID_IMM_RETRY:
1537                 case DID_REQUEUE:
1538                 case DID_SOFT_ERROR:
1539                         return -EBUSY;
1540                 default:
1541                         return -EIO;
1542                 }
1543         }
1544         return 0;
1545 }
1546
1547 static void sd_rescan(struct device *dev)
1548 {
1549         struct scsi_disk *sdkp = dev_get_drvdata(dev);
1550
1551         revalidate_disk(sdkp->disk);
1552 }
1553
1554
1555 #ifdef CONFIG_COMPAT
1556 /*
1557  * This gets directly called from VFS. When the ioctl
1558  * is not recognized we go back to the other translation paths.
1559  */
1560 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1561                            unsigned int cmd, unsigned long arg)
1562 {
1563         struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1564         int error;
1565
1566         error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
1567                         (mode & FMODE_NDELAY) != 0);
1568         if (error)
1569                 return error;
1570
1571         /*
1572          * Let the static ioctl translation table take care of it.
1573          */
1574         if (!sdev->host->hostt->compat_ioctl)
1575                 return -ENOIOCTLCMD;
1576         return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1577 }
1578 #endif
1579
1580 static char sd_pr_type(enum pr_type type)
1581 {
1582         switch (type) {
1583         case PR_WRITE_EXCLUSIVE:
1584                 return 0x01;
1585         case PR_EXCLUSIVE_ACCESS:
1586                 return 0x03;
1587         case PR_WRITE_EXCLUSIVE_REG_ONLY:
1588                 return 0x05;
1589         case PR_EXCLUSIVE_ACCESS_REG_ONLY:
1590                 return 0x06;
1591         case PR_WRITE_EXCLUSIVE_ALL_REGS:
1592                 return 0x07;
1593         case PR_EXCLUSIVE_ACCESS_ALL_REGS:
1594                 return 0x08;
1595         default:
1596                 return 0;
1597         }
1598 };
1599
1600 static int sd_pr_command(struct block_device *bdev, u8 sa,
1601                 u64 key, u64 sa_key, u8 type, u8 flags)
1602 {
1603         struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1604         struct scsi_sense_hdr sshdr;
1605         int result;
1606         u8 cmd[16] = { 0, };
1607         u8 data[24] = { 0, };
1608
1609         cmd[0] = PERSISTENT_RESERVE_OUT;
1610         cmd[1] = sa;
1611         cmd[2] = type;
1612         put_unaligned_be32(sizeof(data), &cmd[5]);
1613
1614         put_unaligned_be64(key, &data[0]);
1615         put_unaligned_be64(sa_key, &data[8]);
1616         data[20] = flags;
1617
1618         result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
1619                         &sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1620
1621         if ((driver_byte(result) & DRIVER_SENSE) &&
1622             (scsi_sense_valid(&sshdr))) {
1623                 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
1624                 scsi_print_sense_hdr(sdev, NULL, &sshdr);
1625         }
1626
1627         return result;
1628 }
1629
1630 static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
1631                 u32 flags)
1632 {
1633         if (flags & ~PR_FL_IGNORE_KEY)
1634                 return -EOPNOTSUPP;
1635         return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
1636                         old_key, new_key, 0,
1637                         (1 << 0) /* APTPL */);
1638 }
1639
1640 static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
1641                 u32 flags)
1642 {
1643         if (flags)
1644                 return -EOPNOTSUPP;
1645         return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
1646 }
1647
1648 static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
1649 {
1650         return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
1651 }
1652
1653 static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
1654                 enum pr_type type, bool abort)
1655 {
1656         return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
1657                              sd_pr_type(type), 0);
1658 }
1659
1660 static int sd_pr_clear(struct block_device *bdev, u64 key)
1661 {
1662         return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
1663 }
1664
1665 static const struct pr_ops sd_pr_ops = {
1666         .pr_register    = sd_pr_register,
1667         .pr_reserve     = sd_pr_reserve,
1668         .pr_release     = sd_pr_release,
1669         .pr_preempt     = sd_pr_preempt,
1670         .pr_clear       = sd_pr_clear,
1671 };
1672
1673 static const struct block_device_operations sd_fops = {
1674         .owner                  = THIS_MODULE,
1675         .open                   = sd_open,
1676         .release                = sd_release,
1677         .ioctl                  = sd_ioctl,
1678         .getgeo                 = sd_getgeo,
1679 #ifdef CONFIG_COMPAT
1680         .compat_ioctl           = sd_compat_ioctl,
1681 #endif
1682         .check_events           = sd_check_events,
1683         .revalidate_disk        = sd_revalidate_disk,
1684         .unlock_native_capacity = sd_unlock_native_capacity,
1685         .pr_ops                 = &sd_pr_ops,
1686 };
1687
1688 /**
1689  *      sd_eh_action - error handling callback
1690  *      @scmd:          sd-issued command that has failed
1691  *      @eh_disp:       The recovery disposition suggested by the midlayer
1692  *
1693  *      This function is called by the SCSI midlayer upon completion of an
1694  *      error test command (currently TEST UNIT READY). The result of sending
1695  *      the eh command is passed in eh_disp.  We're looking for devices that
1696  *      fail medium access commands but are OK with non access commands like
1697  *      test unit ready (so wrongly see the device as having a successful
1698  *      recovery)
1699  **/
1700 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
1701 {
1702         struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1703
1704         if (!scsi_device_online(scmd->device) ||
1705             !scsi_medium_access_command(scmd) ||
1706             host_byte(scmd->result) != DID_TIME_OUT ||
1707             eh_disp != SUCCESS)
1708                 return eh_disp;
1709
1710         /*
1711          * The device has timed out executing a medium access command.
1712          * However, the TEST UNIT READY command sent during error
1713          * handling completed successfully. Either the device is in the
1714          * process of recovering or has it suffered an internal failure
1715          * that prevents access to the storage medium.
1716          */
1717         sdkp->medium_access_timed_out++;
1718
1719         /*
1720          * If the device keeps failing read/write commands but TEST UNIT
1721          * READY always completes successfully we assume that medium
1722          * access is no longer possible and take the device offline.
1723          */
1724         if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1725                 scmd_printk(KERN_ERR, scmd,
1726                             "Medium access timeout failure. Offlining disk!\n");
1727                 scsi_device_set_state(scmd->device, SDEV_OFFLINE);
1728
1729                 return FAILED;
1730         }
1731
1732         return eh_disp;
1733 }
1734
1735 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1736 {
1737         u64 start_lba = blk_rq_pos(scmd->request);
1738         u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1739         u64 factor = scmd->device->sector_size / 512;
1740         u64 bad_lba;
1741         int info_valid;
1742         /*
1743          * resid is optional but mostly filled in.  When it's unused,
1744          * its value is zero, so we assume the whole buffer transferred
1745          */
1746         unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1747         unsigned int good_bytes;
1748
1749         info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1750                                              SCSI_SENSE_BUFFERSIZE,
1751                                              &bad_lba);
1752         if (!info_valid)
1753                 return 0;
1754
1755         if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1756                 return 0;
1757
1758         /* be careful ... don't want any overflows */
1759         do_div(start_lba, factor);
1760         do_div(end_lba, factor);
1761
1762         /* The bad lba was reported incorrectly, we have no idea where
1763          * the error is.
1764          */
1765         if (bad_lba < start_lba  || bad_lba >= end_lba)
1766                 return 0;
1767
1768         /* This computation should always be done in terms of
1769          * the resolution of the device's medium.
1770          */
1771         good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1772         return min(good_bytes, transferred);
1773 }
1774
1775 /**
1776  *      sd_done - bottom half handler: called when the lower level
1777  *      driver has completed (successfully or otherwise) a scsi command.
1778  *      @SCpnt: mid-level's per command structure.
1779  *
1780  *      Note: potentially run from within an ISR. Must not block.
1781  **/
1782 static int sd_done(struct scsi_cmnd *SCpnt)
1783 {
1784         int result = SCpnt->result;
1785         unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1786         struct scsi_sense_hdr sshdr;
1787         struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1788         struct request *req = SCpnt->request;
1789         int sense_valid = 0;
1790         int sense_deferred = 0;
1791         unsigned char op = SCpnt->cmnd[0];
1792         unsigned char unmap = SCpnt->cmnd[1] & 8;
1793
1794         switch (req_op(req)) {
1795         case REQ_OP_DISCARD:
1796         case REQ_OP_WRITE_SAME:
1797         case REQ_OP_ZONE_RESET:
1798                 if (!result) {
1799                         good_bytes = blk_rq_bytes(req);
1800                         scsi_set_resid(SCpnt, 0);
1801                 } else {
1802                         good_bytes = 0;
1803                         scsi_set_resid(SCpnt, blk_rq_bytes(req));
1804                 }
1805                 break;
1806         case REQ_OP_ZONE_REPORT:
1807                 if (!result) {
1808                         good_bytes = scsi_bufflen(SCpnt)
1809                                 - scsi_get_resid(SCpnt);
1810                         scsi_set_resid(SCpnt, 0);
1811                 } else {
1812                         good_bytes = 0;
1813                         scsi_set_resid(SCpnt, blk_rq_bytes(req));
1814                 }
1815                 break;
1816         }
1817
1818         if (result) {
1819                 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1820                 if (sense_valid)
1821                         sense_deferred = scsi_sense_is_deferred(&sshdr);
1822         }
1823         sdkp->medium_access_timed_out = 0;
1824
1825         if (driver_byte(result) != DRIVER_SENSE &&
1826             (!sense_valid || sense_deferred))
1827                 goto out;
1828
1829         switch (sshdr.sense_key) {
1830         case HARDWARE_ERROR:
1831         case MEDIUM_ERROR:
1832                 good_bytes = sd_completed_bytes(SCpnt);
1833                 break;
1834         case RECOVERED_ERROR:
1835                 good_bytes = scsi_bufflen(SCpnt);
1836                 break;
1837         case NO_SENSE:
1838                 /* This indicates a false check condition, so ignore it.  An
1839                  * unknown amount of data was transferred so treat it as an
1840                  * error.
1841                  */
1842                 SCpnt->result = 0;
1843                 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1844                 break;
1845         case ABORTED_COMMAND:
1846                 if (sshdr.asc == 0x10)  /* DIF: Target detected corruption */
1847                         good_bytes = sd_completed_bytes(SCpnt);
1848                 break;
1849         case ILLEGAL_REQUEST:
1850                 if (sshdr.asc == 0x10)  /* DIX: Host detected corruption */
1851                         good_bytes = sd_completed_bytes(SCpnt);
1852                 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1853                 if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
1854                         switch (op) {
1855                         case UNMAP:
1856                                 sd_config_discard(sdkp, SD_LBP_DISABLE);
1857                                 break;
1858                         case WRITE_SAME_16:
1859                         case WRITE_SAME:
1860                                 if (unmap)
1861                                         sd_config_discard(sdkp, SD_LBP_DISABLE);
1862                                 else {
1863                                         sdkp->device->no_write_same = 1;
1864                                         sd_config_write_same(sdkp);
1865
1866                                         good_bytes = 0;
1867                                         req->__data_len = blk_rq_bytes(req);
1868                                         req->rq_flags |= RQF_QUIET;
1869                                 }
1870                         }
1871                 }
1872                 break;
1873         default:
1874                 break;
1875         }
1876
1877  out:
1878         if (sd_is_zoned(sdkp))
1879                 sd_zbc_complete(SCpnt, good_bytes, &sshdr);
1880
1881         SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1882                                            "sd_done: completed %d of %d bytes\n",
1883                                            good_bytes, scsi_bufflen(SCpnt)));
1884
1885         if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1886                 sd_dif_complete(SCpnt, good_bytes);
1887
1888         return good_bytes;
1889 }
1890
1891 /*
1892  * spinup disk - called only in sd_revalidate_disk()
1893  */
1894 static void
1895 sd_spinup_disk(struct scsi_disk *sdkp)
1896 {
1897         unsigned char cmd[10];
1898         unsigned long spintime_expire = 0;
1899         int retries, spintime;
1900         unsigned int the_result;
1901         struct scsi_sense_hdr sshdr;
1902         int sense_valid = 0;
1903
1904         spintime = 0;
1905
1906         /* Spin up drives, as required.  Only do this at boot time */
1907         /* Spinup needs to be done for module loads too. */
1908         do {
1909                 retries = 0;
1910
1911                 do {
1912                         cmd[0] = TEST_UNIT_READY;
1913                         memset((void *) &cmd[1], 0, 9);
1914
1915                         the_result = scsi_execute_req(sdkp->device, cmd,
1916                                                       DMA_NONE, NULL, 0,
1917                                                       &sshdr, SD_TIMEOUT,
1918                                                       SD_MAX_RETRIES, NULL);
1919
1920                         /*
1921                          * If the drive has indicated to us that it
1922                          * doesn't have any media in it, don't bother
1923                          * with any more polling.
1924                          */
1925                         if (media_not_present(sdkp, &sshdr))
1926                                 return;
1927
1928                         if (the_result)
1929                                 sense_valid = scsi_sense_valid(&sshdr);
1930                         retries++;
1931                 } while (retries < 3 &&
1932                          (!scsi_status_is_good(the_result) ||
1933                           ((driver_byte(the_result) & DRIVER_SENSE) &&
1934                           sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1935
1936                 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1937                         /* no sense, TUR either succeeded or failed
1938                          * with a status error */
1939                         if(!spintime && !scsi_status_is_good(the_result)) {
1940                                 sd_print_result(sdkp, "Test Unit Ready failed",
1941                                                 the_result);
1942                         }
1943                         break;
1944                 }
1945
1946                 /*
1947                  * The device does not want the automatic start to be issued.
1948                  */
1949                 if (sdkp->device->no_start_on_add)
1950                         break;
1951
1952                 if (sense_valid && sshdr.sense_key == NOT_READY) {
1953                         if (sshdr.asc == 4 && sshdr.ascq == 3)
1954                                 break;  /* manual intervention required */
1955                         if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1956                                 break;  /* standby */
1957                         if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1958                                 break;  /* unavailable */
1959                         /*
1960                          * Issue command to spin up drive when not ready
1961                          */
1962                         if (!spintime) {
1963                                 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1964                                 cmd[0] = START_STOP;
1965                                 cmd[1] = 1;     /* Return immediately */
1966                                 memset((void *) &cmd[2], 0, 8);
1967                                 cmd[4] = 1;     /* Start spin cycle */
1968                                 if (sdkp->device->start_stop_pwr_cond)
1969                                         cmd[4] |= 1 << 4;
1970                                 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1971                                                  NULL, 0, &sshdr,
1972                                                  SD_TIMEOUT, SD_MAX_RETRIES,
1973                                                  NULL);
1974                                 spintime_expire = jiffies + 100 * HZ;
1975                                 spintime = 1;
1976                         }
1977                         /* Wait 1 second for next try */
1978                         msleep(1000);
1979                         printk(".");
1980
1981                 /*
1982                  * Wait for USB flash devices with slow firmware.
1983                  * Yes, this sense key/ASC combination shouldn't
1984                  * occur here.  It's characteristic of these devices.
1985                  */
1986                 } else if (sense_valid &&
1987                                 sshdr.sense_key == UNIT_ATTENTION &&
1988                                 sshdr.asc == 0x28) {
1989                         if (!spintime) {
1990                                 spintime_expire = jiffies + 5 * HZ;
1991                                 spintime = 1;
1992                         }
1993                         /* Wait 1 second for next try */
1994                         msleep(1000);
1995                 } else {
1996                         /* we don't understand the sense code, so it's
1997                          * probably pointless to loop */
1998                         if(!spintime) {
1999                                 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
2000                                 sd_print_sense_hdr(sdkp, &sshdr);
2001                         }
2002                         break;
2003                 }
2004
2005         } while (spintime && time_before_eq(jiffies, spintime_expire));
2006
2007         if (spintime) {
2008                 if (scsi_status_is_good(the_result))
2009                         printk("ready\n");
2010                 else
2011                         printk("not responding...\n");
2012         }
2013 }
2014
2015 /*
2016  * Determine whether disk supports Data Integrity Field.
2017  */
2018 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
2019 {
2020         struct scsi_device *sdp = sdkp->device;
2021         u8 type;
2022         int ret = 0;
2023
2024         if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
2025                 return ret;
2026
2027         type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
2028
2029         if (type > T10_PI_TYPE3_PROTECTION)
2030                 ret = -ENODEV;
2031         else if (scsi_host_dif_capable(sdp->host, type))
2032                 ret = 1;
2033
2034         if (sdkp->first_scan || type != sdkp->protection_type)
2035                 switch (ret) {
2036                 case -ENODEV:
2037                         sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
2038                                   " protection type %u. Disabling disk!\n",
2039                                   type);
2040                         break;
2041                 case 1:
2042                         sd_printk(KERN_NOTICE, sdkp,
2043                                   "Enabling DIF Type %u protection\n", type);
2044                         break;
2045                 case 0:
2046                         sd_printk(KERN_NOTICE, sdkp,
2047                                   "Disabling DIF Type %u protection\n", type);
2048                         break;
2049                 }
2050
2051         sdkp->protection_type = type;
2052
2053         return ret;
2054 }
2055
2056 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
2057                         struct scsi_sense_hdr *sshdr, int sense_valid,
2058                         int the_result)
2059 {
2060         if (driver_byte(the_result) & DRIVER_SENSE)
2061                 sd_print_sense_hdr(sdkp, sshdr);
2062         else
2063                 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
2064
2065         /*
2066          * Set dirty bit for removable devices if not ready -
2067          * sometimes drives will not report this properly.
2068          */
2069         if (sdp->removable &&
2070             sense_valid && sshdr->sense_key == NOT_READY)
2071                 set_media_not_present(sdkp);
2072
2073         /*
2074          * We used to set media_present to 0 here to indicate no media
2075          * in the drive, but some drives fail read capacity even with
2076          * media present, so we can't do that.
2077          */
2078         sdkp->capacity = 0; /* unknown mapped to zero - as usual */
2079 }
2080
2081 #define RC16_LEN 32
2082 #if RC16_LEN > SD_BUF_SIZE
2083 #error RC16_LEN must not be more than SD_BUF_SIZE
2084 #endif
2085
2086 #define READ_CAPACITY_RETRIES_ON_RESET  10
2087
2088 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
2089                                                 unsigned char *buffer)
2090 {
2091         unsigned char cmd[16];
2092         struct scsi_sense_hdr sshdr;
2093         int sense_valid = 0;
2094         int the_result;
2095         int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2096         unsigned int alignment;
2097         unsigned long long lba;
2098         unsigned sector_size;
2099
2100         if (sdp->no_read_capacity_16)
2101                 return -EINVAL;
2102
2103         do {
2104                 memset(cmd, 0, 16);
2105                 cmd[0] = SERVICE_ACTION_IN_16;
2106                 cmd[1] = SAI_READ_CAPACITY_16;
2107                 cmd[13] = RC16_LEN;
2108                 memset(buffer, 0, RC16_LEN);
2109
2110                 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2111                                         buffer, RC16_LEN, &sshdr,
2112                                         SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2113
2114                 if (media_not_present(sdkp, &sshdr))
2115                         return -ENODEV;
2116
2117                 if (the_result) {
2118                         sense_valid = scsi_sense_valid(&sshdr);
2119                         if (sense_valid &&
2120                             sshdr.sense_key == ILLEGAL_REQUEST &&
2121                             (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
2122                             sshdr.ascq == 0x00)
2123                                 /* Invalid Command Operation Code or
2124                                  * Invalid Field in CDB, just retry
2125                                  * silently with RC10 */
2126                                 return -EINVAL;
2127                         if (sense_valid &&
2128                             sshdr.sense_key == UNIT_ATTENTION &&
2129                             sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2130                                 /* Device reset might occur several times,
2131                                  * give it one more chance */
2132                                 if (--reset_retries > 0)
2133                                         continue;
2134                 }
2135                 retries--;
2136
2137         } while (the_result && retries);
2138
2139         if (the_result) {
2140                 sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
2141                 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2142                 return -EINVAL;
2143         }
2144
2145         sector_size = get_unaligned_be32(&buffer[8]);
2146         lba = get_unaligned_be64(&buffer[0]);
2147
2148         if (sd_read_protection_type(sdkp, buffer) < 0) {
2149                 sdkp->capacity = 0;
2150                 return -ENODEV;
2151         }
2152
2153         if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
2154                 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2155                         "kernel compiled with support for large block "
2156                         "devices.\n");
2157                 sdkp->capacity = 0;
2158                 return -EOVERFLOW;
2159         }
2160
2161         /* Logical blocks per physical block exponent */
2162         sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2163
2164         /* RC basis */
2165         sdkp->rc_basis = (buffer[12] >> 4) & 0x3;
2166
2167         /* Lowest aligned logical block */
2168         alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2169         blk_queue_alignment_offset(sdp->request_queue, alignment);
2170         if (alignment && sdkp->first_scan)
2171                 sd_printk(KERN_NOTICE, sdkp,
2172                           "physical block alignment offset: %u\n", alignment);
2173
2174         if (buffer[14] & 0x80) { /* LBPME */
2175                 sdkp->lbpme = 1;
2176
2177                 if (buffer[14] & 0x40) /* LBPRZ */
2178                         sdkp->lbprz = 1;
2179
2180                 sd_config_discard(sdkp, SD_LBP_WS16);
2181         }
2182
2183         sdkp->capacity = lba + 1;
2184         return sector_size;
2185 }
2186
2187 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2188                                                 unsigned char *buffer)
2189 {
2190         unsigned char cmd[16];
2191         struct scsi_sense_hdr sshdr;
2192         int sense_valid = 0;
2193         int the_result;
2194         int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2195         sector_t lba;
2196         unsigned sector_size;
2197
2198         do {
2199                 cmd[0] = READ_CAPACITY;
2200                 memset(&cmd[1], 0, 9);
2201                 memset(buffer, 0, 8);
2202
2203                 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2204                                         buffer, 8, &sshdr,
2205                                         SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2206
2207                 if (media_not_present(sdkp, &sshdr))
2208                         return -ENODEV;
2209
2210                 if (the_result) {
2211                         sense_valid = scsi_sense_valid(&sshdr);
2212                         if (sense_valid &&
2213                             sshdr.sense_key == UNIT_ATTENTION &&
2214                             sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2215                                 /* Device reset might occur several times,
2216                                  * give it one more chance */
2217                                 if (--reset_retries > 0)
2218                                         continue;
2219                 }
2220                 retries--;
2221
2222         } while (the_result && retries);
2223
2224         if (the_result) {
2225                 sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
2226                 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2227                 return -EINVAL;
2228         }
2229
2230         sector_size = get_unaligned_be32(&buffer[4]);
2231         lba = get_unaligned_be32(&buffer[0]);
2232
2233         if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2234                 /* Some buggy (usb cardreader) devices return an lba of
2235                    0xffffffff when the want to report a size of 0 (with
2236                    which they really mean no media is present) */
2237                 sdkp->capacity = 0;
2238                 sdkp->physical_block_size = sector_size;
2239                 return sector_size;
2240         }
2241
2242         if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
2243                 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2244                         "kernel compiled with support for large block "
2245                         "devices.\n");
2246                 sdkp->capacity = 0;
2247                 return -EOVERFLOW;
2248         }
2249
2250         sdkp->capacity = lba + 1;
2251         sdkp->physical_block_size = sector_size;
2252         return sector_size;
2253 }
2254
2255 static int sd_try_rc16_first(struct scsi_device *sdp)
2256 {
2257         if (sdp->host->max_cmd_len < 16)
2258                 return 0;
2259         if (sdp->try_rc_10_first)
2260                 return 0;
2261         if (sdp->scsi_level > SCSI_SPC_2)
2262                 return 1;
2263         if (scsi_device_protection(sdp))
2264                 return 1;
2265         return 0;
2266 }
2267
2268 /*
2269  * read disk capacity
2270  */
2271 static void
2272 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2273 {
2274         int sector_size;
2275         struct scsi_device *sdp = sdkp->device;
2276
2277         if (sd_try_rc16_first(sdp)) {
2278                 sector_size = read_capacity_16(sdkp, sdp, buffer);
2279                 if (sector_size == -EOVERFLOW)
2280                         goto got_data;
2281                 if (sector_size == -ENODEV)
2282                         return;
2283                 if (sector_size < 0)
2284                         sector_size = read_capacity_10(sdkp, sdp, buffer);
2285                 if (sector_size < 0)
2286                         return;
2287         } else {
2288                 sector_size = read_capacity_10(sdkp, sdp, buffer);
2289                 if (sector_size == -EOVERFLOW)
2290                         goto got_data;
2291                 if (sector_size < 0)
2292                         return;
2293                 if ((sizeof(sdkp->capacity) > 4) &&
2294                     (sdkp->capacity > 0xffffffffULL)) {
2295                         int old_sector_size = sector_size;
2296                         sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2297                                         "Trying to use READ CAPACITY(16).\n");
2298                         sector_size = read_capacity_16(sdkp, sdp, buffer);
2299                         if (sector_size < 0) {
2300                                 sd_printk(KERN_NOTICE, sdkp,
2301                                         "Using 0xffffffff as device size\n");
2302                                 sdkp->capacity = 1 + (sector_t) 0xffffffff;
2303                                 sector_size = old_sector_size;
2304                                 goto got_data;
2305                         }
2306                 }
2307         }
2308
2309         /* Some devices are known to return the total number of blocks,
2310          * not the highest block number.  Some devices have versions
2311          * which do this and others which do not.  Some devices we might
2312          * suspect of doing this but we don't know for certain.
2313          *
2314          * If we know the reported capacity is wrong, decrement it.  If
2315          * we can only guess, then assume the number of blocks is even
2316          * (usually true but not always) and err on the side of lowering
2317          * the capacity.
2318          */
2319         if (sdp->fix_capacity ||
2320             (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2321                 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2322                                 "from its reported value: %llu\n",
2323                                 (unsigned long long) sdkp->capacity);
2324                 --sdkp->capacity;
2325         }
2326
2327 got_data:
2328         if (sector_size == 0) {
2329                 sector_size = 512;
2330                 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2331                           "assuming 512.\n");
2332         }
2333
2334         if (sector_size != 512 &&
2335             sector_size != 1024 &&
2336             sector_size != 2048 &&
2337             sector_size != 4096) {
2338                 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2339                           sector_size);
2340                 /*
2341                  * The user might want to re-format the drive with
2342                  * a supported sectorsize.  Once this happens, it
2343                  * would be relatively trivial to set the thing up.
2344                  * For this reason, we leave the thing in the table.
2345                  */
2346                 sdkp->capacity = 0;
2347                 /*
2348                  * set a bogus sector size so the normal read/write
2349                  * logic in the block layer will eventually refuse any
2350                  * request on this device without tripping over power
2351                  * of two sector size assumptions
2352                  */
2353                 sector_size = 512;
2354         }
2355         blk_queue_logical_block_size(sdp->request_queue, sector_size);
2356         blk_queue_physical_block_size(sdp->request_queue,
2357                                       sdkp->physical_block_size);
2358         sdkp->device->sector_size = sector_size;
2359
2360         if (sdkp->capacity > 0xffffffff)
2361                 sdp->use_16_for_rw = 1;
2362
2363 }
2364
2365 /*
2366  * Print disk capacity
2367  */
2368 static void
2369 sd_print_capacity(struct scsi_disk *sdkp,
2370                   sector_t old_capacity)
2371 {
2372         int sector_size = sdkp->device->sector_size;
2373         char cap_str_2[10], cap_str_10[10];
2374
2375         string_get_size(sdkp->capacity, sector_size,
2376                         STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
2377         string_get_size(sdkp->capacity, sector_size,
2378                         STRING_UNITS_10, cap_str_10,
2379                         sizeof(cap_str_10));
2380
2381         if (sdkp->first_scan || old_capacity != sdkp->capacity) {
2382                 sd_printk(KERN_NOTICE, sdkp,
2383                           "%llu %d-byte logical blocks: (%s/%s)\n",
2384                           (unsigned long long)sdkp->capacity,
2385                           sector_size, cap_str_10, cap_str_2);
2386
2387                 if (sdkp->physical_block_size != sector_size)
2388                         sd_printk(KERN_NOTICE, sdkp,
2389                                   "%u-byte physical blocks\n",
2390                                   sdkp->physical_block_size);
2391
2392                 sd_zbc_print_zones(sdkp);
2393         }
2394 }
2395
2396 /* called with buffer of length 512 */
2397 static inline int
2398 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
2399                  unsigned char *buffer, int len, struct scsi_mode_data *data,
2400                  struct scsi_sense_hdr *sshdr)
2401 {
2402         return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
2403                                SD_TIMEOUT, SD_MAX_RETRIES, data,
2404                                sshdr);
2405 }
2406
2407 /*
2408  * read write protect setting, if possible - called only in sd_revalidate_disk()
2409  * called with buffer of length SD_BUF_SIZE
2410  */
2411 static void
2412 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2413 {
2414         int res;
2415         struct scsi_device *sdp = sdkp->device;
2416         struct scsi_mode_data data;
2417         int old_wp = sdkp->write_prot;
2418
2419         set_disk_ro(sdkp->disk, 0);
2420         if (sdp->skip_ms_page_3f) {
2421                 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2422                 return;
2423         }
2424
2425         if (sdp->use_192_bytes_for_3f) {
2426                 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
2427         } else {
2428                 /*
2429                  * First attempt: ask for all pages (0x3F), but only 4 bytes.
2430                  * We have to start carefully: some devices hang if we ask
2431                  * for more than is available.
2432                  */
2433                 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
2434
2435                 /*
2436                  * Second attempt: ask for page 0 When only page 0 is
2437                  * implemented, a request for page 3F may return Sense Key
2438                  * 5: Illegal Request, Sense Code 24: Invalid field in
2439                  * CDB.
2440                  */
2441                 if (!scsi_status_is_good(res))
2442                         res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2443
2444                 /*
2445                  * Third attempt: ask 255 bytes, as we did earlier.
2446                  */
2447                 if (!scsi_status_is_good(res))
2448                         res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2449                                                &data, NULL);
2450         }
2451
2452         if (!scsi_status_is_good(res)) {
2453                 sd_first_printk(KERN_WARNING, sdkp,
2454                           "Test WP failed, assume Write Enabled\n");
2455         } else {
2456                 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2457                 set_disk_ro(sdkp->disk, sdkp->write_prot);
2458                 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2459                         sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2460                                   sdkp->write_prot ? "on" : "off");
2461                         sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer);
2462                 }
2463         }
2464 }
2465
2466 /*
2467  * sd_read_cache_type - called only from sd_revalidate_disk()
2468  * called with buffer of length SD_BUF_SIZE
2469  */
2470 static void
2471 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2472 {
2473         int len = 0, res;
2474         struct scsi_device *sdp = sdkp->device;
2475
2476         int dbd;
2477         int modepage;
2478         int first_len;
2479         struct scsi_mode_data data;
2480         struct scsi_sense_hdr sshdr;
2481         int old_wce = sdkp->WCE;
2482         int old_rcd = sdkp->RCD;
2483         int old_dpofua = sdkp->DPOFUA;
2484
2485
2486         if (sdkp->cache_override)
2487                 return;
2488
2489         first_len = 4;
2490         if (sdp->skip_ms_page_8) {
2491                 if (sdp->type == TYPE_RBC)
2492                         goto defaults;
2493                 else {
2494                         if (sdp->skip_ms_page_3f)
2495                                 goto defaults;
2496                         modepage = 0x3F;
2497                         if (sdp->use_192_bytes_for_3f)
2498                                 first_len = 192;
2499                         dbd = 0;
2500                 }
2501         } else if (sdp->type == TYPE_RBC) {
2502                 modepage = 6;
2503                 dbd = 8;
2504         } else {
2505                 modepage = 8;
2506                 dbd = 0;
2507         }
2508
2509         /* cautiously ask */
2510         res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2511                         &data, &sshdr);
2512
2513         if (!scsi_status_is_good(res))
2514                 goto bad_sense;
2515
2516         if (!data.header_length) {
2517                 modepage = 6;
2518                 first_len = 0;
2519                 sd_first_printk(KERN_ERR, sdkp,
2520                                 "Missing header in MODE_SENSE response\n");
2521         }
2522
2523         /* that went OK, now ask for the proper length */
2524         len = data.length;
2525
2526         /*
2527          * We're only interested in the first three bytes, actually.
2528          * But the data cache page is defined for the first 20.
2529          */
2530         if (len < 3)
2531                 goto bad_sense;
2532         else if (len > SD_BUF_SIZE) {
2533                 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2534                           "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2535                 len = SD_BUF_SIZE;
2536         }
2537         if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2538                 len = 192;
2539
2540         /* Get the data */
2541         if (len > first_len)
2542                 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2543                                 &data, &sshdr);
2544
2545         if (scsi_status_is_good(res)) {
2546                 int offset = data.header_length + data.block_descriptor_length;
2547
2548                 while (offset < len) {
2549                         u8 page_code = buffer[offset] & 0x3F;
2550                         u8 spf       = buffer[offset] & 0x40;
2551
2552                         if (page_code == 8 || page_code == 6) {
2553                                 /* We're interested only in the first 3 bytes.
2554                                  */
2555                                 if (len - offset <= 2) {
2556                                         sd_first_printk(KERN_ERR, sdkp,
2557                                                 "Incomplete mode parameter "
2558                                                         "data\n");
2559                                         goto defaults;
2560                                 } else {
2561                                         modepage = page_code;
2562                                         goto Page_found;
2563                                 }
2564                         } else {
2565                                 /* Go to the next page */
2566                                 if (spf && len - offset > 3)
2567                                         offset += 4 + (buffer[offset+2] << 8) +
2568                                                 buffer[offset+3];
2569                                 else if (!spf && len - offset > 1)
2570                                         offset += 2 + buffer[offset+1];
2571                                 else {
2572                                         sd_first_printk(KERN_ERR, sdkp,
2573                                                         "Incomplete mode "
2574                                                         "parameter data\n");
2575                                         goto defaults;
2576                                 }
2577                         }
2578                 }
2579
2580                 sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
2581                 goto defaults;
2582
2583         Page_found:
2584                 if (modepage == 8) {
2585                         sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2586                         sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2587                 } else {
2588                         sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2589                         sdkp->RCD = 0;
2590                 }
2591
2592                 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2593                 if (sdp->broken_fua) {
2594                         sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
2595                         sdkp->DPOFUA = 0;
2596                 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw &&
2597                            !sdkp->device->use_16_for_rw) {
2598                         sd_first_printk(KERN_NOTICE, sdkp,
2599                                   "Uses READ/WRITE(6), disabling FUA\n");
2600                         sdkp->DPOFUA = 0;
2601                 }
2602
2603                 /* No cache flush allowed for write protected devices */
2604                 if (sdkp->WCE && sdkp->write_prot)
2605                         sdkp->WCE = 0;
2606
2607                 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2608                     old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2609                         sd_printk(KERN_NOTICE, sdkp,
2610                                   "Write cache: %s, read cache: %s, %s\n",
2611                                   sdkp->WCE ? "enabled" : "disabled",
2612                                   sdkp->RCD ? "disabled" : "enabled",
2613                                   sdkp->DPOFUA ? "supports DPO and FUA"
2614                                   : "doesn't support DPO or FUA");
2615
2616                 return;
2617         }
2618
2619 bad_sense:
2620         if (scsi_sense_valid(&sshdr) &&
2621             sshdr.sense_key == ILLEGAL_REQUEST &&
2622             sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2623                 /* Invalid field in CDB */
2624                 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2625         else
2626                 sd_first_printk(KERN_ERR, sdkp,
2627                                 "Asking for cache data failed\n");
2628
2629 defaults:
2630         if (sdp->wce_default_on) {
2631                 sd_first_printk(KERN_NOTICE, sdkp,
2632                                 "Assuming drive cache: write back\n");
2633                 sdkp->WCE = 1;
2634         } else {
2635                 sd_first_printk(KERN_ERR, sdkp,
2636                                 "Assuming drive cache: write through\n");
2637                 sdkp->WCE = 0;
2638         }
2639         sdkp->RCD = 0;
2640         sdkp->DPOFUA = 0;
2641 }
2642
2643 /*
2644  * The ATO bit indicates whether the DIF application tag is available
2645  * for use by the operating system.
2646  */
2647 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2648 {
2649         int res, offset;
2650         struct scsi_device *sdp = sdkp->device;
2651         struct scsi_mode_data data;
2652         struct scsi_sense_hdr sshdr;
2653
2654         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
2655                 return;
2656
2657         if (sdkp->protection_type == 0)
2658                 return;
2659
2660         res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2661                               SD_MAX_RETRIES, &data, &sshdr);
2662
2663         if (!scsi_status_is_good(res) || !data.header_length ||
2664             data.length < 6) {
2665                 sd_first_printk(KERN_WARNING, sdkp,
2666                           "getting Control mode page failed, assume no ATO\n");
2667
2668                 if (scsi_sense_valid(&sshdr))
2669                         sd_print_sense_hdr(sdkp, &sshdr);
2670
2671                 return;
2672         }
2673
2674         offset = data.header_length + data.block_descriptor_length;
2675
2676         if ((buffer[offset] & 0x3f) != 0x0a) {
2677                 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2678                 return;
2679         }
2680
2681         if ((buffer[offset + 5] & 0x80) == 0)
2682                 return;
2683
2684         sdkp->ATO = 1;
2685
2686         return;
2687 }
2688
2689 /**
2690  * sd_read_block_limits - Query disk device for preferred I/O sizes.
2691  * @disk: disk to query
2692  */
2693 static void sd_read_block_limits(struct scsi_disk *sdkp)
2694 {
2695         unsigned int sector_sz = sdkp->device->sector_size;
2696         const int vpd_len = 64;
2697         unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2698
2699         if (!buffer ||
2700             /* Block Limits VPD */
2701             scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2702                 goto out;
2703
2704         blk_queue_io_min(sdkp->disk->queue,
2705                          get_unaligned_be16(&buffer[6]) * sector_sz);
2706
2707         sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
2708         sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
2709
2710         if (buffer[3] == 0x3c) {
2711                 unsigned int lba_count, desc_count;
2712
2713                 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
2714
2715                 if (!sdkp->lbpme)
2716                         goto out;
2717
2718                 lba_count = get_unaligned_be32(&buffer[20]);
2719                 desc_count = get_unaligned_be32(&buffer[24]);
2720
2721                 if (lba_count && desc_count)
2722                         sdkp->max_unmap_blocks = lba_count;
2723
2724                 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2725
2726                 if (buffer[32] & 0x80)
2727                         sdkp->unmap_alignment =
2728                                 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2729
2730                 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2731
2732                         if (sdkp->max_unmap_blocks)
2733                                 sd_config_discard(sdkp, SD_LBP_UNMAP);
2734                         else
2735                                 sd_config_discard(sdkp, SD_LBP_WS16);
2736
2737                 } else {        /* LBP VPD page tells us what to use */
2738                         if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz)
2739                                 sd_config_discard(sdkp, SD_LBP_UNMAP);
2740                         else if (sdkp->lbpws)
2741                                 sd_config_discard(sdkp, SD_LBP_WS16);
2742                         else if (sdkp->lbpws10)
2743                                 sd_config_discard(sdkp, SD_LBP_WS10);
2744                         else if (sdkp->lbpu && sdkp->max_unmap_blocks)
2745                                 sd_config_discard(sdkp, SD_LBP_UNMAP);
2746                         else
2747                                 sd_config_discard(sdkp, SD_LBP_DISABLE);
2748                 }
2749         }
2750
2751  out:
2752         kfree(buffer);
2753 }
2754
2755 /**
2756  * sd_read_block_characteristics - Query block dev. characteristics
2757  * @disk: disk to query
2758  */
2759 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2760 {
2761         struct request_queue *q = sdkp->disk->queue;
2762         unsigned char *buffer;
2763         u16 rot;
2764         const int vpd_len = 64;
2765
2766         buffer = kmalloc(vpd_len, GFP_KERNEL);
2767
2768         if (!buffer ||
2769             /* Block Device Characteristics VPD */
2770             scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2771                 goto out;
2772
2773         rot = get_unaligned_be16(&buffer[4]);
2774
2775         if (rot == 1) {
2776                 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
2777                 queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
2778         }
2779
2780         if (sdkp->device->type == TYPE_ZBC) {
2781                 /* Host-managed */
2782                 q->limits.zoned = BLK_ZONED_HM;
2783         } else {
2784                 sdkp->zoned = (buffer[8] >> 4) & 3;
2785                 if (sdkp->zoned == 1)
2786                         /* Host-aware */
2787                         q->limits.zoned = BLK_ZONED_HA;
2788                 else
2789                         /*
2790                          * Treat drive-managed devices as
2791                          * regular block devices.
2792                          */
2793                         q->limits.zoned = BLK_ZONED_NONE;
2794         }
2795         if (blk_queue_is_zoned(q) && sdkp->first_scan)
2796                 sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
2797                       q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
2798
2799  out:
2800         kfree(buffer);
2801 }
2802
2803 /**
2804  * sd_read_block_provisioning - Query provisioning VPD page
2805  * @disk: disk to query
2806  */
2807 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2808 {
2809         unsigned char *buffer;
2810         const int vpd_len = 8;
2811
2812         if (sdkp->lbpme == 0)
2813                 return;
2814
2815         buffer = kmalloc(vpd_len, GFP_KERNEL);
2816
2817         if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2818                 goto out;
2819
2820         sdkp->lbpvpd    = 1;
2821         sdkp->lbpu      = (buffer[5] >> 7) & 1; /* UNMAP */
2822         sdkp->lbpws     = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2823         sdkp->lbpws10   = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2824
2825  out:
2826         kfree(buffer);
2827 }
2828
2829 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
2830 {
2831         struct scsi_device *sdev = sdkp->device;
2832
2833         if (sdev->host->no_write_same) {
2834                 sdev->no_write_same = 1;
2835
2836                 return;
2837         }
2838
2839         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
2840                 /* too large values might cause issues with arcmsr */
2841                 int vpd_buf_len = 64;
2842
2843                 sdev->no_report_opcodes = 1;
2844
2845                 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
2846                  * CODES is unsupported and the device has an ATA
2847                  * Information VPD page (SAT).
2848                  */
2849                 if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
2850                         sdev->no_write_same = 1;
2851         }
2852
2853         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
2854                 sdkp->ws16 = 1;
2855
2856         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
2857                 sdkp->ws10 = 1;
2858 }
2859
2860 /**
2861  *      sd_revalidate_disk - called the first time a new disk is seen,
2862  *      performs disk spin up, read_capacity, etc.
2863  *      @disk: struct gendisk we care about
2864  **/
2865 static int sd_revalidate_disk(struct gendisk *disk)
2866 {
2867         struct scsi_disk *sdkp = scsi_disk(disk);
2868         struct scsi_device *sdp = sdkp->device;
2869         struct request_queue *q = sdkp->disk->queue;
2870         sector_t old_capacity = sdkp->capacity;
2871         unsigned char *buffer;
2872         unsigned int dev_max, rw_max;
2873
2874         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2875                                       "sd_revalidate_disk\n"));
2876
2877         /*
2878          * If the device is offline, don't try and read capacity or any
2879          * of the other niceties.
2880          */
2881         if (!scsi_device_online(sdp))
2882                 goto out;
2883
2884         buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2885         if (!buffer) {
2886                 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2887                           "allocation failure.\n");
2888                 goto out;
2889         }
2890
2891         sd_spinup_disk(sdkp);
2892
2893         /*
2894          * Without media there is no reason to ask; moreover, some devices
2895          * react badly if we do.
2896          */
2897         if (sdkp->media_present) {
2898                 sd_read_capacity(sdkp, buffer);
2899
2900                 if (scsi_device_supports_vpd(sdp)) {
2901                         sd_read_block_provisioning(sdkp);
2902                         sd_read_block_limits(sdkp);
2903                         sd_read_block_characteristics(sdkp);
2904                         sd_zbc_read_zones(sdkp, buffer);
2905                 }
2906
2907                 sd_print_capacity(sdkp, old_capacity);
2908
2909                 sd_read_write_protect_flag(sdkp, buffer);
2910                 sd_read_cache_type(sdkp, buffer);
2911                 sd_read_app_tag_own(sdkp, buffer);
2912                 sd_read_write_same(sdkp, buffer);
2913         }
2914
2915         sdkp->first_scan = 0;
2916
2917         /*
2918          * We now have all cache related info, determine how we deal
2919          * with flush requests.
2920          */
2921         sd_set_flush_flag(sdkp);
2922
2923         /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
2924         dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
2925
2926         /* Some devices report a maximum block count for READ/WRITE requests. */
2927         dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
2928         q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
2929
2930         /*
2931          * Use the device's preferred I/O size for reads and writes
2932          * unless the reported value is unreasonably small, large, or
2933          * garbage.
2934          */
2935         if (sdkp->opt_xfer_blocks &&
2936             sdkp->opt_xfer_blocks <= dev_max &&
2937             sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
2938             logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) {
2939                 q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
2940                 rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
2941         } else
2942                 rw_max = BLK_DEF_MAX_SECTORS;
2943
2944         /* Combine with controller limits */
2945         q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
2946
2947         set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
2948         sd_config_write_same(sdkp);
2949         kfree(buffer);
2950
2951  out:
2952         return 0;
2953 }
2954
2955 /**
2956  *      sd_unlock_native_capacity - unlock native capacity
2957  *      @disk: struct gendisk to set capacity for
2958  *
2959  *      Block layer calls this function if it detects that partitions
2960  *      on @disk reach beyond the end of the device.  If the SCSI host
2961  *      implements ->unlock_native_capacity() method, it's invoked to
2962  *      give it a chance to adjust the device capacity.
2963  *
2964  *      CONTEXT:
2965  *      Defined by block layer.  Might sleep.
2966  */
2967 static void sd_unlock_native_capacity(struct gendisk *disk)
2968 {
2969         struct scsi_device *sdev = scsi_disk(disk)->device;
2970
2971         if (sdev->host->hostt->unlock_native_capacity)
2972                 sdev->host->hostt->unlock_native_capacity(sdev);
2973 }
2974
2975 /**
2976  *      sd_format_disk_name - format disk name
2977  *      @prefix: name prefix - ie. "sd" for SCSI disks
2978  *      @index: index of the disk to format name for
2979  *      @buf: output buffer
2980  *      @buflen: length of the output buffer
2981  *
2982  *      SCSI disk names starts at sda.  The 26th device is sdz and the
2983  *      27th is sdaa.  The last one for two lettered suffix is sdzz
2984  *      which is followed by sdaaa.
2985  *
2986  *      This is basically 26 base counting with one extra 'nil' entry
2987  *      at the beginning from the second digit on and can be
2988  *      determined using similar method as 26 base conversion with the
2989  *      index shifted -1 after each digit is computed.
2990  *
2991  *      CONTEXT:
2992  *      Don't care.
2993  *
2994  *      RETURNS:
2995  *      0 on success, -errno on failure.
2996  */
2997 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2998 {
2999         const int base = 'z' - 'a' + 1;
3000         char *begin = buf + strlen(prefix);
3001         char *end = buf + buflen;
3002         char *p;
3003         int unit;
3004
3005         p = end - 1;
3006         *p = '\0';
3007         unit = base;
3008         do {
3009                 if (p == begin)
3010                         return -EINVAL;
3011                 *--p = 'a' + (index % unit);
3012                 index = (index / unit) - 1;
3013         } while (index >= 0);
3014
3015         memmove(begin, p, end - p);
3016         memcpy(buf, prefix, strlen(prefix));
3017
3018         return 0;
3019 }
3020
3021 /*
3022  * The asynchronous part of sd_probe
3023  */
3024 static void sd_probe_async(void *data, async_cookie_t cookie)
3025 {
3026         struct scsi_disk *sdkp = data;
3027         struct scsi_device *sdp;
3028         struct gendisk *gd;
3029         u32 index;
3030         struct device *dev;
3031
3032         sdp = sdkp->device;
3033         gd = sdkp->disk;
3034         index = sdkp->index;
3035         dev = &sdp->sdev_gendev;
3036
3037         gd->major = sd_major((index & 0xf0) >> 4);
3038         gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
3039         gd->minors = SD_MINORS;
3040
3041         gd->fops = &sd_fops;
3042         gd->private_data = &sdkp->driver;
3043         gd->queue = sdkp->device->request_queue;
3044
3045         /* defaults, until the device tells us otherwise */
3046         sdp->sector_size = 512;
3047         sdkp->capacity = 0;
3048         sdkp->media_present = 1;
3049         sdkp->write_prot = 0;
3050         sdkp->cache_override = 0;
3051         sdkp->WCE = 0;
3052         sdkp->RCD = 0;
3053         sdkp->ATO = 0;
3054         sdkp->first_scan = 1;
3055         sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
3056
3057         sd_revalidate_disk(gd);
3058
3059         gd->flags = GENHD_FL_EXT_DEVT;
3060         if (sdp->removable) {
3061                 gd->flags |= GENHD_FL_REMOVABLE;
3062                 gd->events |= DISK_EVENT_MEDIA_CHANGE;
3063         }
3064
3065         blk_pm_runtime_init(sdp->request_queue, dev);
3066         device_add_disk(dev, gd);
3067         if (sdkp->capacity)
3068                 sd_dif_config_host(sdkp);
3069
3070         sd_revalidate_disk(gd);
3071
3072         sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
3073                   sdp->removable ? "removable " : "");
3074         scsi_autopm_put_device(sdp);
3075         put_device(&sdkp->dev);
3076 }
3077
3078 /**
3079  *      sd_probe - called during driver initialization and whenever a
3080  *      new scsi device is attached to the system. It is called once
3081  *      for each scsi device (not just disks) present.
3082  *      @dev: pointer to device object
3083  *
3084  *      Returns 0 if successful (or not interested in this scsi device
3085  *      (e.g. scanner)); 1 when there is an error.
3086  *
3087  *      Note: this function is invoked from the scsi mid-level.
3088  *      This function sets up the mapping between a given
3089  *      <host,channel,id,lun> (found in sdp) and new device name
3090  *      (e.g. /dev/sda). More precisely it is the block device major
3091  *      and minor number that is chosen here.
3092  *
3093  *      Assume sd_probe is not re-entrant (for time being)
3094  *      Also think about sd_probe() and sd_remove() running coincidentally.
3095  **/
3096 static int sd_probe(struct device *dev)
3097 {
3098         struct scsi_device *sdp = to_scsi_device(dev);
3099         struct scsi_disk *sdkp;
3100         struct gendisk *gd;
3101         int index;
3102         int error;
3103
3104         scsi_autopm_get_device(sdp);
3105         error = -ENODEV;
3106         if (sdp->type != TYPE_DISK &&
3107             sdp->type != TYPE_ZBC &&
3108             sdp->type != TYPE_MOD &&
3109             sdp->type != TYPE_RBC)
3110                 goto out;
3111
3112 #ifndef CONFIG_BLK_DEV_ZONED
3113         if (sdp->type == TYPE_ZBC)
3114                 goto out;
3115 #endif
3116         SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
3117                                         "sd_probe\n"));
3118
3119         error = -ENOMEM;
3120         sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
3121         if (!sdkp)
3122                 goto out;
3123
3124         gd = alloc_disk(SD_MINORS);
3125         if (!gd)
3126                 goto out_free;
3127
3128         do {
3129                 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
3130                         goto out_put;
3131
3132                 spin_lock(&sd_index_lock);
3133                 error = ida_get_new(&sd_index_ida, &index);
3134                 spin_unlock(&sd_index_lock);
3135         } while (error == -EAGAIN);
3136
3137         if (error) {
3138                 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
3139                 goto out_put;
3140         }
3141
3142         error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
3143         if (error) {
3144                 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
3145                 goto out_free_index;
3146         }
3147
3148         sdkp->device = sdp;
3149         sdkp->driver = &sd_template;
3150         sdkp->disk = gd;
3151         sdkp->index = index;
3152         atomic_set(&sdkp->openers, 0);
3153         atomic_set(&sdkp->device->ioerr_cnt, 0);
3154
3155         if (!sdp->request_queue->rq_timeout) {
3156                 if (sdp->type != TYPE_MOD)
3157                         blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
3158                 else
3159                         blk_queue_rq_timeout(sdp->request_queue,
3160                                              SD_MOD_TIMEOUT);
3161         }
3162
3163         device_initialize(&sdkp->dev);
3164         sdkp->dev.parent = dev;
3165         sdkp->dev.class = &sd_disk_class;
3166         dev_set_name(&sdkp->dev, "%s", dev_name(dev));
3167
3168         error = device_add(&sdkp->dev);
3169         if (error)
3170                 goto out_free_index;
3171
3172         get_device(dev);
3173         dev_set_drvdata(dev, sdkp);
3174
3175         get_device(&sdkp->dev); /* prevent release before async_schedule */
3176         async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
3177
3178         return 0;
3179
3180  out_free_index:
3181         spin_lock(&sd_index_lock);
3182         ida_remove(&sd_index_ida, index);
3183         spin_unlock(&sd_index_lock);
3184  out_put:
3185         put_disk(gd);
3186  out_free:
3187         kfree(sdkp);
3188  out:
3189         scsi_autopm_put_device(sdp);
3190         return error;
3191 }
3192
3193 /**
3194  *      sd_remove - called whenever a scsi disk (previously recognized by
3195  *      sd_probe) is detached from the system. It is called (potentially
3196  *      multiple times) during sd module unload.
3197  *      @dev: pointer to device object
3198  *
3199  *      Note: this function is invoked from the scsi mid-level.
3200  *      This function potentially frees up a device name (e.g. /dev/sdc)
3201  *      that could be re-used by a subsequent sd_probe().
3202  *      This function is not called when the built-in sd driver is "exit-ed".
3203  **/
3204 static int sd_remove(struct device *dev)
3205 {
3206         struct scsi_disk *sdkp;
3207         dev_t devt;
3208
3209         sdkp = dev_get_drvdata(dev);
3210         devt = disk_devt(sdkp->disk);
3211         scsi_autopm_get_device(sdkp->device);
3212
3213         async_synchronize_full_domain(&scsi_sd_pm_domain);
3214         async_synchronize_full_domain(&scsi_sd_probe_domain);
3215         device_del(&sdkp->dev);
3216         del_gendisk(sdkp->disk);
3217         sd_shutdown(dev);
3218
3219         sd_zbc_remove(sdkp);
3220
3221         blk_register_region(devt, SD_MINORS, NULL,
3222                             sd_default_probe, NULL, NULL);
3223
3224         mutex_lock(&sd_ref_mutex);
3225         dev_set_drvdata(dev, NULL);
3226         put_device(&sdkp->dev);
3227         mutex_unlock(&sd_ref_mutex);
3228
3229         return 0;
3230 }
3231
3232 /**
3233  *      scsi_disk_release - Called to free the scsi_disk structure
3234  *      @dev: pointer to embedded class device
3235  *
3236  *      sd_ref_mutex must be held entering this routine.  Because it is
3237  *      called on last put, you should always use the scsi_disk_get()
3238  *      scsi_disk_put() helpers which manipulate the semaphore directly
3239  *      and never do a direct put_device.
3240  **/
3241 static void scsi_disk_release(struct device *dev)
3242 {
3243         struct scsi_disk *sdkp = to_scsi_disk(dev);
3244         struct gendisk *disk = sdkp->disk;
3245
3246         spin_lock(&sd_index_lock);
3247         ida_remove(&sd_index_ida, sdkp->index);
3248         spin_unlock(&sd_index_lock);
3249
3250         disk->private_data = NULL;
3251         put_disk(disk);
3252         put_device(&sdkp->device->sdev_gendev);
3253
3254         kfree(sdkp);
3255 }
3256
3257 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3258 {
3259         unsigned char cmd[6] = { START_STOP };  /* START_VALID */
3260         struct scsi_sense_hdr sshdr;
3261         struct scsi_device *sdp = sdkp->device;
3262         int res;
3263
3264         if (start)
3265                 cmd[4] |= 1;    /* START */
3266
3267         if (sdp->start_stop_pwr_cond)
3268                 cmd[4] |= start ? 1 << 4 : 3 << 4;      /* Active or Standby */
3269
3270         if (!scsi_device_online(sdp))
3271                 return -ENODEV;
3272
3273         res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
3274                         SD_TIMEOUT, SD_MAX_RETRIES, 0, RQF_PM, NULL);
3275         if (res) {
3276                 sd_print_result(sdkp, "Start/Stop Unit failed", res);
3277                 if (driver_byte(res) & DRIVER_SENSE)
3278                         sd_print_sense_hdr(sdkp, &sshdr);
3279                 if (scsi_sense_valid(&sshdr) &&
3280                         /* 0x3a is medium not present */
3281                         sshdr.asc == 0x3a)
3282                         res = 0;
3283         }
3284
3285         /* SCSI error codes must not go to the generic layer */
3286         if (res)
3287                 return -EIO;
3288
3289         return 0;
3290 }
3291
3292 /*
3293  * Send a SYNCHRONIZE CACHE instruction down to the device through
3294  * the normal SCSI command structure.  Wait for the command to
3295  * complete.
3296  */
3297 static void sd_shutdown(struct device *dev)
3298 {
3299         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3300
3301         if (!sdkp)
3302                 return;         /* this can happen */
3303
3304         if (pm_runtime_suspended(dev))
3305                 return;
3306
3307         if (sdkp->WCE && sdkp->media_present) {
3308                 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3309                 sd_sync_cache(sdkp);
3310         }
3311
3312         if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3313                 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3314                 sd_start_stop_device(sdkp, 0);
3315         }
3316 }
3317
3318 static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
3319 {
3320         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3321         int ret = 0;
3322
3323         if (!sdkp)      /* E.g.: runtime suspend following sd_remove() */
3324                 return 0;
3325
3326         if (sdkp->WCE && sdkp->media_present) {
3327                 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3328                 ret = sd_sync_cache(sdkp);
3329                 if (ret) {
3330                         /* ignore OFFLINE device */
3331                         if (ret == -ENODEV)
3332                                 ret = 0;
3333                         goto done;
3334                 }
3335         }
3336
3337         if (sdkp->device->manage_start_stop) {
3338                 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3339                 /* an error is not worth aborting a system sleep */
3340                 ret = sd_start_stop_device(sdkp, 0);
3341                 if (ignore_stop_errors)
3342                         ret = 0;
3343         }
3344
3345 done:
3346         return ret;
3347 }
3348
3349 static int sd_suspend_system(struct device *dev)
3350 {
3351         return sd_suspend_common(dev, true);
3352 }
3353
3354 static int sd_suspend_runtime(struct device *dev)
3355 {
3356         return sd_suspend_common(dev, false);
3357 }
3358
3359 static int sd_resume(struct device *dev)
3360 {
3361         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3362
3363         if (!sdkp)      /* E.g.: runtime resume at the start of sd_probe() */
3364                 return 0;
3365
3366         if (!sdkp->device->manage_start_stop)
3367                 return 0;
3368
3369         sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3370         return sd_start_stop_device(sdkp, 1);
3371 }
3372
3373 /**
3374  *      init_sd - entry point for this driver (both when built in or when
3375  *      a module).
3376  *
3377  *      Note: this function registers this driver with the scsi mid-level.
3378  **/
3379 static int __init init_sd(void)
3380 {
3381         int majors = 0, i, err;
3382
3383         SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3384
3385         for (i = 0; i < SD_MAJORS; i++) {
3386                 if (register_blkdev(sd_major(i), "sd") != 0)
3387                         continue;
3388                 majors++;
3389                 blk_register_region(sd_major(i), SD_MINORS, NULL,
3390                                     sd_default_probe, NULL, NULL);
3391         }
3392
3393         if (!majors)
3394                 return -ENODEV;
3395
3396         err = class_register(&sd_disk_class);
3397         if (err)
3398                 goto err_out;
3399
3400         sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3401                                          0, 0, NULL);
3402         if (!sd_cdb_cache) {
3403                 printk(KERN_ERR "sd: can't init extended cdb cache\n");
3404                 err = -ENOMEM;
3405                 goto err_out_class;
3406         }
3407
3408         sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
3409         if (!sd_cdb_pool) {
3410                 printk(KERN_ERR "sd: can't init extended cdb pool\n");
3411                 err = -ENOMEM;
3412                 goto err_out_cache;
3413         }
3414
3415         err = scsi_register_driver(&sd_template.gendrv);
3416         if (err)
3417                 goto err_out_driver;
3418
3419         return 0;
3420
3421 err_out_driver:
3422         mempool_destroy(sd_cdb_pool);
3423
3424 err_out_cache:
3425         kmem_cache_destroy(sd_cdb_cache);
3426
3427 err_out_class:
3428         class_unregister(&sd_disk_class);
3429 err_out:
3430         for (i = 0; i < SD_MAJORS; i++)
3431                 unregister_blkdev(sd_major(i), "sd");
3432         return err;
3433 }
3434
3435 /**
3436  *      exit_sd - exit point for this driver (when it is a module).
3437  *
3438  *      Note: this function unregisters this driver from the scsi mid-level.
3439  **/
3440 static void __exit exit_sd(void)
3441 {
3442         int i;
3443
3444         SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3445
3446         scsi_unregister_driver(&sd_template.gendrv);
3447         mempool_destroy(sd_cdb_pool);
3448         kmem_cache_destroy(sd_cdb_cache);
3449
3450         class_unregister(&sd_disk_class);
3451
3452         for (i = 0; i < SD_MAJORS; i++) {
3453                 blk_unregister_region(sd_major(i), SD_MINORS);
3454                 unregister_blkdev(sd_major(i), "sd");
3455         }
3456 }
3457
3458 module_init(init_sd);
3459 module_exit(exit_sd);
3460
3461 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
3462                                struct scsi_sense_hdr *sshdr)
3463 {
3464         scsi_print_sense_hdr(sdkp->device,
3465                              sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
3466 }
3467
3468 static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
3469                             int result)
3470 {
3471         const char *hb_string = scsi_hostbyte_string(result);
3472         const char *db_string = scsi_driverbyte_string(result);
3473
3474         if (hb_string || db_string)
3475                 sd_printk(KERN_INFO, sdkp,
3476                           "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
3477                           hb_string ? hb_string : "invalid",
3478                           db_string ? db_string : "invalid");
3479         else
3480                 sd_printk(KERN_INFO, sdkp,
3481                           "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
3482                           msg, host_byte(result), driver_byte(result));
3483 }
3484