drivers/scsi/qla2xxx/qla_init.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/delay.h>
  10 #include <linux/vmalloc.h>
  11
  12 #include "qla_devtbl.h"
  13
  14 #ifdef CONFIG_SPARC
  15 #include <asm/prom.h>
  16 #endif
  17
  18 /* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
  19 #ifndef EXT_IS_LUN_BIT_SET
  20 #define EXT_IS_LUN_BIT_SET(P,L) \
  21     (((P)->mask[L/8] & (0x80 >> (L%8)))?1:0)
  22 #define EXT_SET_LUN_BIT(P,L) \
  23     ((P)->mask[L/8] |= (0x80 >> (L%8)))
  24 #endif
  25
  26 /*
  27 *  QLogic ISP2x00 Hardware Support Function Prototypes.
  28 */
  29 static int qla2x00_isp_firmware(scsi_qla_host_t *);
  30 static void qla2x00_resize_request_q(scsi_qla_host_t *);
  31 static int qla2x00_setup_chip(scsi_qla_host_t *);
  32 static void qla2x00_init_response_q_entries(scsi_qla_host_t *);
  33 static int qla2x00_init_rings(scsi_qla_host_t *);
  34 static int qla2x00_fw_ready(scsi_qla_host_t *);
  35 static int qla2x00_configure_hba(scsi_qla_host_t *);
  36 static int qla2x00_configure_loop(scsi_qla_host_t *);
  37 static int qla2x00_configure_local_loop(scsi_qla_host_t *);
  38 static int qla2x00_configure_fabric(scsi_qla_host_t *);
  39 static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
  40 static int qla2x00_device_resync(scsi_qla_host_t *);
  41 static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
  42     uint16_t *);
  43
  44 static int qla2x00_restart_isp(scsi_qla_host_t *);
  45
  46 static int qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev);
  47
  48 /****************************************************************************/
  49 /*                QLogic ISP2x00 Hardware Support Functions.                */
  50 /****************************************************************************/
  51
  52 /*
  53 * qla2x00_initialize_adapter
  54 *      Initialize board.
  55 *
  56 * Input:
  57 *      ha = adapter block pointer.
  58 *
  59 * Returns:
  60 *      0 = success
  61 */
  62 int
  63 qla2x00_initialize_adapter(scsi_qla_host_t *ha)
  64 {
  65         int     rval;
  66
  67         /* Clear adapter flags. */
  68         ha->flags.online = 0;
  69         ha->flags.reset_active = 0;
  70         atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
  71         atomic_set(&ha->loop_state, LOOP_DOWN);
  72         ha->device_flags = DFLG_NO_CABLE;
  73         ha->dpc_flags = 0;
  74         ha->flags.management_server_logged_in = 0;
  75         ha->marker_needed = 0;
  76         ha->mbx_flags = 0;
  77         ha->isp_abort_cnt = 0;
  78         ha->beacon_blink_led = 0;
  79         set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
  80
  81         qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
  82         rval = ha->isp_ops->pci_config(ha);
  83         if (rval) {
  84                 DEBUG2(printk("scsi(%ld): Unable to configure PCI space.\n",
  85                     ha->host_no));
  86                 return (rval);
  87         }
  88
  89         ha->isp_ops->reset_chip(ha);
  90
  91         ha->isp_ops->get_flash_version(ha, ha->request_ring);
  92
  93         qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
  94
  95         ha->isp_ops->nvram_config(ha);
  96
  97         if (ha->flags.disable_serdes) {
  98                 /* Mask HBA via NVRAM settings? */
  99                 qla_printk(KERN_INFO, ha, "Masking HBA WWPN "
 100                     "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n",
 101                     ha->port_name[0], ha->port_name[1],
 102                     ha->port_name[2], ha->port_name[3],
 103                     ha->port_name[4], ha->port_name[5],
 104                     ha->port_name[6], ha->port_name[7]);
 105                 return QLA_FUNCTION_FAILED;
 106         }
 107
 108         qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
 109
 110         if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
 111                 rval = ha->isp_ops->chip_diag(ha);
 112                 if (rval)
 113                         return (rval);
 114                 rval = qla2x00_setup_chip(ha);
 115                 if (rval)
 116                         return (rval);
 117         }
 118         rval = qla2x00_init_rings(ha);
 119
 120         return (rval);
 121 }
 122
 123 /**
 124  * qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
 125  * @ha: HA context
 126  *
 127  * Returns 0 on success.
 128  */
 129 int
 130 qla2100_pci_config(scsi_qla_host_t *ha)
 131 {
 132         uint16_t w;
 133         uint32_t d;
 134         unsigned long flags;
 135         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 136
 137         pci_set_master(ha->pdev);
 138         pci_try_set_mwi(ha->pdev);
 139
 140         pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
 141         w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 142         pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 143
 144         /* Reset expansion ROM address decode enable */
 145         pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
 146         d &= ~PCI_ROM_ADDRESS_ENABLE;
 147         pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
 148
 149         /* Get PCI bus information. */
 150         spin_lock_irqsave(&ha->hardware_lock, flags);
 151         ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
 152         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 153
 154         return QLA_SUCCESS;
 155 }
 156
 157 /**
 158  * qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
 159  * @ha: HA context
 160  *
 161  * Returns 0 on success.
 162  */
 163 int
 164 qla2300_pci_config(scsi_qla_host_t *ha)
 165 {
 166         uint16_t        w;
 167         uint32_t        d;
 168         unsigned long   flags = 0;
 169         uint32_t        cnt;
 170         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 171
 172         pci_set_master(ha->pdev);
 173         pci_try_set_mwi(ha->pdev);
 174
 175         pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
 176         w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 177
 178         if (IS_QLA2322(ha) || IS_QLA6322(ha))
 179                 w &= ~PCI_COMMAND_INTX_DISABLE;
 180         pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 181
 182         /*
 183          * If this is a 2300 card and not 2312, reset the
 184          * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
 185          * the 2310 also reports itself as a 2300 so we need to get the
 186          * fb revision level -- a 6 indicates it really is a 2300 and
 187          * not a 2310.
 188          */
 189         if (IS_QLA2300(ha)) {
 190                 spin_lock_irqsave(&ha->hardware_lock, flags);
 191
 192                 /* Pause RISC. */
 193                 WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
 194                 for (cnt = 0; cnt < 30000; cnt++) {
 195                         if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
 196                                 break;
 197
 198                         udelay(10);
 199                 }
 200
 201                 /* Select FPM registers. */
 202                 WRT_REG_WORD(&reg->ctrl_status, 0x20);
 203                 RD_REG_WORD(&reg->ctrl_status);
 204
 205                 /* Get the fb rev level */
 206                 ha->fb_rev = RD_FB_CMD_REG(ha, reg);
 207
 208                 if (ha->fb_rev == FPM_2300)
 209                         pci_clear_mwi(ha->pdev);
 210
 211                 /* Deselect FPM registers. */
 212                 WRT_REG_WORD(&reg->ctrl_status, 0x0);
 213                 RD_REG_WORD(&reg->ctrl_status);
 214
 215                 /* Release RISC module. */
 216                 WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
 217                 for (cnt = 0; cnt < 30000; cnt++) {
 218                         if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
 219                                 break;
 220
 221                         udelay(10);
 222                 }
 223
 224                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 225         }
 226
 227         pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 228
 229         /* Reset expansion ROM address decode enable */
 230         pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
 231         d &= ~PCI_ROM_ADDRESS_ENABLE;
 232         pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
 233
 234         /* Get PCI bus information. */
 235         spin_lock_irqsave(&ha->hardware_lock, flags);
 236         ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
 237         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 238
 239         return QLA_SUCCESS;
 240 }
 241
 242 /**
 243  * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
 244  * @ha: HA context
 245  *
 246  * Returns 0 on success.
 247  */
 248 int
 249 qla24xx_pci_config(scsi_qla_host_t *ha)
 250 {
 251         uint16_t w;
 252         uint32_t d;
 253         unsigned long flags = 0;
 254         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 255
 256         pci_set_master(ha->pdev);
 257         pci_try_set_mwi(ha->pdev);
 258
 259         pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
 260         w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 261         w &= ~PCI_COMMAND_INTX_DISABLE;
 262         pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 263
 264         pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 265
 266         /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
 267         if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
 268                 pcix_set_mmrbc(ha->pdev, 2048);
 269
 270         /* PCIe -- adjust Maximum Read Request Size (2048). */
 271         if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
 272                 pcie_set_readrq(ha->pdev, 2048);
 273
 274         /* Reset expansion ROM address decode enable */
 275         pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
 276         d &= ~PCI_ROM_ADDRESS_ENABLE;
 277         pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
 278
 279         ha->chip_revision = ha->pdev->revision;
 280
 281         /* Get PCI bus information. */
 282         spin_lock_irqsave(&ha->hardware_lock, flags);
 283         ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
 284         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 285
 286         return QLA_SUCCESS;
 287 }
 288
 289 /**
 290  * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
 291  * @ha: HA context
 292  *
 293  * Returns 0 on success.
 294  */
 295 int
 296 qla25xx_pci_config(scsi_qla_host_t *ha)
 297 {
 298         uint16_t w;
 299         uint32_t d;
 300
 301         pci_set_master(ha->pdev);
 302         pci_try_set_mwi(ha->pdev);
 303
 304         pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
 305         w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 306         w &= ~PCI_COMMAND_INTX_DISABLE;
 307         pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 308
 309         /* PCIe -- adjust Maximum Read Request Size (2048). */
 310         if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
 311                 pcie_set_readrq(ha->pdev, 2048);
 312
 313         /* Reset expansion ROM address decode enable */
 314         pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
 315         d &= ~PCI_ROM_ADDRESS_ENABLE;
 316         pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
 317
 318         ha->chip_revision = ha->pdev->revision;
 319
 320         return QLA_SUCCESS;
 321 }
 322
 323 /**
 324  * qla2x00_isp_firmware() - Choose firmware image.
 325  * @ha: HA context
 326  *
 327  * Returns 0 on success.
 328  */
 329 static int
 330 qla2x00_isp_firmware(scsi_qla_host_t *ha)
 331 {
 332         int  rval;
 333
 334         /* Assume loading risc code */
 335         rval = QLA_FUNCTION_FAILED;
 336
 337         if (ha->flags.disable_risc_code_load) {
 338                 DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n",
 339                     ha->host_no));
 340                 qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
 341
 342                 /* Verify checksum of loaded RISC code. */
 343                 rval = qla2x00_verify_checksum(ha, ha->fw_srisc_address);
 344         }
 345
 346         if (rval) {
 347                 DEBUG2_3(printk("scsi(%ld): **** Load RISC code ****\n",
 348                     ha->host_no));
 349         }
 350
 351         return (rval);
 352 }
 353
 354 /**
 355  * qla2x00_reset_chip() - Reset ISP chip.
 356  * @ha: HA context
 357  *
 358  * Returns 0 on success.
 359  */
 360 void
 361 qla2x00_reset_chip(scsi_qla_host_t *ha)
 362 {
 363         unsigned long   flags = 0;
 364         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 365         uint32_t        cnt;
 366         uint16_t        cmd;
 367
 368         ha->isp_ops->disable_intrs(ha);
 369
 370         spin_lock_irqsave(&ha->hardware_lock, flags);
 371
 372         /* Turn off master enable */
 373         cmd = 0;
 374         pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd);
 375         cmd &= ~PCI_COMMAND_MASTER;
 376         pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);
 377
 378         if (!IS_QLA2100(ha)) {
 379                 /* Pause RISC. */
 380                 WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
 381                 if (IS_QLA2200(ha) || IS_QLA2300(ha)) {
 382                         for (cnt = 0; cnt < 30000; cnt++) {
 383                                 if ((RD_REG_WORD(&reg->hccr) &
 384                                     HCCR_RISC_PAUSE) != 0)
 385                                         break;
 386                                 udelay(100);
 387                         }
 388                 } else {
 389                         RD_REG_WORD(&reg->hccr);        /* PCI Posting. */
 390                         udelay(10);
 391                 }
 392
 393                 /* Select FPM registers. */
 394                 WRT_REG_WORD(&reg->ctrl_status, 0x20);
 395                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
 396
 397                 /* FPM Soft Reset. */
 398                 WRT_REG_WORD(&reg->fpm_diag_config, 0x100);
 399                 RD_REG_WORD(&reg->fpm_diag_config);     /* PCI Posting. */
 400
 401                 /* Toggle Fpm Reset. */
 402                 if (!IS_QLA2200(ha)) {
 403                         WRT_REG_WORD(&reg->fpm_diag_config, 0x0);
 404                         RD_REG_WORD(&reg->fpm_diag_config); /* PCI Posting. */
 405                 }
 406
 407                 /* Select frame buffer registers. */
 408                 WRT_REG_WORD(&reg->ctrl_status, 0x10);
 409                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
 410
 411                 /* Reset frame buffer FIFOs. */
 412                 if (IS_QLA2200(ha)) {
 413                         WRT_FB_CMD_REG(ha, reg, 0xa000);
 414                         RD_FB_CMD_REG(ha, reg);         /* PCI Posting. */
 415                 } else {
 416                         WRT_FB_CMD_REG(ha, reg, 0x00fc);
 417
 418                         /* Read back fb_cmd until zero or 3 seconds max */
 419                         for (cnt = 0; cnt < 3000; cnt++) {
 420                                 if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0)
 421                                         break;
 422                                 udelay(100);
 423                         }
 424                 }
 425
 426                 /* Select RISC module registers. */
 427                 WRT_REG_WORD(&reg->ctrl_status, 0);
 428                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
 429
 430                 /* Reset RISC processor. */
 431                 WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
 432                 RD_REG_WORD(&reg->hccr);                /* PCI Posting. */
 433
 434                 /* Release RISC processor. */
 435                 WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
 436                 RD_REG_WORD(&reg->hccr);                /* PCI Posting. */
 437         }
 438
 439         WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
 440         WRT_REG_WORD(&reg->hccr, HCCR_CLR_HOST_INT);
 441
 442         /* Reset ISP chip. */
 443         WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
 444
 445         /* Wait for RISC to recover from reset. */
 446         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
 447                 /*
 448                  * It is necessary to for a delay here since the card doesn't
 449                  * respond to PCI reads during a reset. On some architectures
 450                  * this will result in an MCA.
 451                  */
 452                 udelay(20);
 453                 for (cnt = 30000; cnt; cnt--) {
 454                         if ((RD_REG_WORD(&reg->ctrl_status) &
 455                             CSR_ISP_SOFT_RESET) == 0)
 456                                 break;
 457                         udelay(100);
 458                 }
 459         } else
 460                 udelay(10);
 461
 462         /* Reset RISC processor. */
 463         WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
 464
 465         WRT_REG_WORD(&reg->semaphore, 0);
 466
 467         /* Release RISC processor. */
 468         WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
 469         RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */
 470
 471         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
 472                 for (cnt = 0; cnt < 30000; cnt++) {
 473                         if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY)
 474                                 break;
 475
 476                         udelay(100);
 477                 }
 478         } else
 479                 udelay(100);
 480
 481         /* Turn on master enable */
 482         cmd |= PCI_COMMAND_MASTER;
 483         pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);
 484
 485         /* Disable RISC pause on FPM parity error. */
 486         if (!IS_QLA2100(ha)) {
 487                 WRT_REG_WORD(&reg->hccr, HCCR_DISABLE_PARITY_PAUSE);
 488                 RD_REG_WORD(&reg->hccr);                /* PCI Posting. */
 489         }
 490
 491         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 492 }
 493
 494 /**
 495  * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
 496  * @ha: HA context
 497  *
 498  * Returns 0 on success.
 499  */
 500 static inline void
 501 qla24xx_reset_risc(scsi_qla_host_t *ha)
 502 {
 503         unsigned long flags = 0;
 504         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 505         uint32_t cnt, d2;
 506         uint16_t wd;
 507
 508         spin_lock_irqsave(&ha->hardware_lock, flags);
 509
 510         /* Reset RISC. */
 511         WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
 512         for (cnt = 0; cnt < 30000; cnt++) {
 513                 if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
 514                         break;
 515
 516                 udelay(10);
 517         }
 518
 519         WRT_REG_DWORD(&reg->ctrl_status,
 520             CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
 521         pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
 522
 523         udelay(100);
 524         /* Wait for firmware to complete NVRAM accesses. */
 525         d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
 526         for (cnt = 10000 ; cnt && d2; cnt--) {
 527                 udelay(5);
 528                 d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
 529                 barrier();
 530         }
 531
 532         /* Wait for soft-reset to complete. */
 533         d2 = RD_REG_DWORD(&reg->ctrl_status);
 534         for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
 535                 udelay(5);
 536                 d2 = RD_REG_DWORD(&reg->ctrl_status);
 537                 barrier();
 538         }
 539
 540         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
 541         RD_REG_DWORD(&reg->hccr);
 542
 543         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 544         RD_REG_DWORD(&reg->hccr);
 545
 546         WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
 547         RD_REG_DWORD(&reg->hccr);
 548
 549         d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
 550         for (cnt = 6000000 ; cnt && d2; cnt--) {
 551                 udelay(5);
 552                 d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
 553                 barrier();
 554         }
 555
 556         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 557 }
 558
 559 /**
 560  * qla24xx_reset_chip() - Reset ISP24xx chip.
 561  * @ha: HA context
 562  *
 563  * Returns 0 on success.
 564  */
 565 void
 566 qla24xx_reset_chip(scsi_qla_host_t *ha)
 567 {
 568         ha->isp_ops->disable_intrs(ha);
 569
 570         /* Perform RISC reset. */
 571         qla24xx_reset_risc(ha);
 572 }
 573
 574 /**
 575  * qla2x00_chip_diag() - Test chip for proper operation.
 576  * @ha: HA context
 577  *
 578  * Returns 0 on success.
 579  */
 580 int
 581 qla2x00_chip_diag(scsi_qla_host_t *ha)
 582 {
 583         int             rval;
 584         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 585         unsigned long   flags = 0;
 586         uint16_t        data;
 587         uint32_t        cnt;
 588         uint16_t        mb[5];
 589
 590         /* Assume a failed state */
 591         rval = QLA_FUNCTION_FAILED;
 592
 593         DEBUG3(printk("scsi(%ld): Testing device at %lx.\n",
 594             ha->host_no, (u_long)&reg->flash_address));
 595
 596         spin_lock_irqsave(&ha->hardware_lock, flags);
 597
 598         /* Reset ISP chip. */
 599         WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
 600
 601         /*
 602          * We need to have a delay here since the card will not respond while
 603          * in reset causing an MCA on some architectures.
 604          */
 605         udelay(20);
 606         data = qla2x00_debounce_register(&reg->ctrl_status);
 607         for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) {
 608                 udelay(5);
 609                 data = RD_REG_WORD(&reg->ctrl_status);
 610                 barrier();
 611         }
 612
 613         if (!cnt)
 614                 goto chip_diag_failed;
 615
 616         DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
 617             ha->host_no));
 618
 619         /* Reset RISC processor. */
 620         WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
 621         WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
 622
 623         /* Workaround for QLA2312 PCI parity error */
 624         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
 625                 data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0));
 626                 for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) {
 627                         udelay(5);
 628                         data = RD_MAILBOX_REG(ha, reg, 0);
 629                         barrier();
 630                 }
 631         } else
 632                 udelay(10);
 633
 634         if (!cnt)
 635                 goto chip_diag_failed;
 636
 637         /* Check product ID of chip */
 638         DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));
 639
 640         mb[1] = RD_MAILBOX_REG(ha, reg, 1);
 641         mb[2] = RD_MAILBOX_REG(ha, reg, 2);
 642         mb[3] = RD_MAILBOX_REG(ha, reg, 3);
 643         mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4));
 644         if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) ||
 645             mb[3] != PROD_ID_3) {
 646                 qla_printk(KERN_WARNING, ha,
 647                     "Wrong product ID = 0x%x,0x%x,0x%x\n", mb[1], mb[2], mb[3]);
 648
 649                 goto chip_diag_failed;
 650         }
 651         ha->product_id[0] = mb[1];
 652         ha->product_id[1] = mb[2];
 653         ha->product_id[2] = mb[3];
 654         ha->product_id[3] = mb[4];
 655
 656         /* Adjust fw RISC transfer size */
 657         if (ha->request_q_length > 1024)
 658                 ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
 659         else
 660                 ha->fw_transfer_size = REQUEST_ENTRY_SIZE *
 661                     ha->request_q_length;
 662
 663         if (IS_QLA2200(ha) &&
 664             RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) {
 665                 /* Limit firmware transfer size with a 2200A */
 666                 DEBUG3(printk("scsi(%ld): Found QLA2200A chip.\n",
 667                     ha->host_no));
 668
 669                 ha->device_type |= DT_ISP2200A;
 670                 ha->fw_transfer_size = 128;
 671         }
 672
 673         /* Wrap Incoming Mailboxes Test. */
 674         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 675
 676         DEBUG3(printk("scsi(%ld): Checking mailboxes.\n", ha->host_no));
 677         rval = qla2x00_mbx_reg_test(ha);
 678         if (rval) {
 679                 DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
 680                     ha->host_no));
 681                 qla_printk(KERN_WARNING, ha,
 682                     "Failed mailbox send register test\n");
 683         }
 684         else {
 685                 /* Flag a successful rval */
 686                 rval = QLA_SUCCESS;
 687         }
 688         spin_lock_irqsave(&ha->hardware_lock, flags);
 689
 690 chip_diag_failed:
 691         if (rval)
 692                 DEBUG2_3(printk("scsi(%ld): Chip diagnostics **** FAILED "
 693                     "****\n", ha->host_no));
 694
 695         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 696
 697         return (rval);
 698 }
 699
 700 /**
 701  * qla24xx_chip_diag() - Test ISP24xx for proper operation.
 702  * @ha: HA context
 703  *
 704  * Returns 0 on success.
 705  */
 706 int
 707 qla24xx_chip_diag(scsi_qla_host_t *ha)
 708 {
 709         int rval;
 710
 711         /* Perform RISC reset. */
 712         qla24xx_reset_risc(ha);
 713
 714         ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
 715
 716         rval = qla2x00_mbx_reg_test(ha);
 717         if (rval) {
 718                 DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
 719                     ha->host_no));
 720                 qla_printk(KERN_WARNING, ha,
 721                     "Failed mailbox send register test\n");
 722         } else {
 723                 /* Flag a successful rval */
 724                 rval = QLA_SUCCESS;
 725         }
 726
 727         return rval;
 728 }
 729
 730 void
 731 qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 732 {
 733         int rval;
 734         uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
 735             eft_size, fce_size;
 736         dma_addr_t tc_dma;
 737         void *tc;
 738
 739         if (ha->fw_dump) {
 740                 qla_printk(KERN_WARNING, ha,
 741                     "Firmware dump previously allocated.\n");
 742                 return;
 743         }
 744
 745         ha->fw_dumped = 0;
 746         fixed_size = mem_size = eft_size = fce_size = 0;
 747         if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
 748                 fixed_size = sizeof(struct qla2100_fw_dump);
 749         } else if (IS_QLA23XX(ha)) {
 750                 fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
 751                 mem_size = (ha->fw_memory_size - 0x11000 + 1) *
 752                     sizeof(uint16_t);
 753         } else if (IS_FWI2_CAPABLE(ha)) {
 754                 fixed_size = IS_QLA25XX(ha) ?
 755                     offsetof(struct qla25xx_fw_dump, ext_mem):
 756                     offsetof(struct qla24xx_fw_dump, ext_mem);
 757                 mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 758                     sizeof(uint32_t);
 759
 760                 /* Allocate memory for Extended Trace Buffer. */
 761                 tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
 762                     GFP_KERNEL);
 763                 if (!tc) {
 764                         qla_printk(KERN_WARNING, ha, "Unable to allocate "
 765                             "(%d KB) for EFT.\n", EFT_SIZE / 1024);
 766                         goto cont_alloc;
 767                 }
 768
 769                 memset(tc, 0, EFT_SIZE);
 770                 rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
 771                 if (rval) {
 772                         qla_printk(KERN_WARNING, ha, "Unable to initialize "
 773                             "EFT (%d).\n", rval);
 774                         dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
 775                             tc_dma);
 776                         goto cont_alloc;
 777                 }
 778
 779                 qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
 780                     EFT_SIZE / 1024);
 781
 782                 eft_size = EFT_SIZE;
 783                 ha->eft_dma = tc_dma;
 784                 ha->eft = tc;
 785
 786                 /* Allocate memory for Fibre Channel Event Buffer. */
 787                 if (!IS_QLA25XX(ha))
 788                         goto cont_alloc;
 789
 790                 tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
 791                     GFP_KERNEL);
 792                 if (!tc) {
 793                         qla_printk(KERN_WARNING, ha, "Unable to allocate "
 794                             "(%d KB) for FCE.\n", FCE_SIZE / 1024);
 795                         goto cont_alloc;
 796                 }
 797
 798                 memset(tc, 0, FCE_SIZE);
 799                 rval = qla2x00_enable_fce_trace(ha, tc_dma, FCE_NUM_BUFFERS,
 800                     ha->fce_mb, &ha->fce_bufs);
 801                 if (rval) {
 802                         qla_printk(KERN_WARNING, ha, "Unable to initialize "
 803                             "FCE (%d).\n", rval);
 804                         dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
 805                             tc_dma);
 806                         ha->flags.fce_enabled = 0;
 807                         goto cont_alloc;
 808                 }
 809
 810                 qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
 811                     FCE_SIZE / 1024);
 812
 813                 fce_size = sizeof(struct qla2xxx_fce_chain) + EFT_SIZE;
 814                 ha->flags.fce_enabled = 1;
 815                 ha->fce_dma = tc_dma;
 816                 ha->fce = tc;
 817         }
 818 cont_alloc:
 819         req_q_size = ha->request_q_length * sizeof(request_t);
 820         rsp_q_size = ha->response_q_length * sizeof(response_t);
 821
 822         dump_size = offsetof(struct qla2xxx_fw_dump, isp);
 823         dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
 824             eft_size + fce_size;
 825
 826         ha->fw_dump = vmalloc(dump_size);
 827         if (!ha->fw_dump) {
 828                 qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
 829                     "firmware dump!!!\n", dump_size / 1024);
 830
 831                 if (ha->eft) {
 832                         dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
 833                             ha->eft_dma);
 834                         ha->eft = NULL;
 835                         ha->eft_dma = 0;
 836                 }
 837                 return;
 838         }
 839
 840         qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
 841             dump_size / 1024);
 842
 843         ha->fw_dump_len = dump_size;
 844         ha->fw_dump->signature[0] = 'Q';
 845         ha->fw_dump->signature[1] = 'L';
 846         ha->fw_dump->signature[2] = 'G';
 847         ha->fw_dump->signature[3] = 'C';
 848         ha->fw_dump->version = __constant_htonl(1);
 849
 850         ha->fw_dump->fixed_size = htonl(fixed_size);
 851         ha->fw_dump->mem_size = htonl(mem_size);
 852         ha->fw_dump->req_q_size = htonl(req_q_size);
 853         ha->fw_dump->rsp_q_size = htonl(rsp_q_size);
 854
 855         ha->fw_dump->eft_size = htonl(eft_size);
 856         ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
 857         ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));
 858
 859         ha->fw_dump->header_size =
 860             htonl(offsetof(struct qla2xxx_fw_dump, isp));
 861 }
 862
 863 /**
 864  * qla2x00_resize_request_q() - Resize request queue given available ISP memory.
 865  * @ha: HA context
 866  *
 867  * Returns 0 on success.
 868  */
 869 static void
 870 qla2x00_resize_request_q(scsi_qla_host_t *ha)
 871 {
 872         int rval;
 873         uint16_t fw_iocb_cnt = 0;
 874         uint16_t request_q_length = REQUEST_ENTRY_CNT_2XXX_EXT_MEM;
 875         dma_addr_t request_dma;
 876         request_t *request_ring;
 877
 878         /* Valid only on recent ISPs. */
 879         if (IS_QLA2100(ha) || IS_QLA2200(ha))
 880                 return;
 881
 882         /* Retrieve IOCB counts available to the firmware. */
 883         rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt,
 884             &ha->max_npiv_vports);
 885         if (rval)
 886                 return;
 887         /* No point in continuing if current settings are sufficient. */
 888         if (fw_iocb_cnt < 1024)
 889                 return;
 890         if (ha->request_q_length >= request_q_length)
 891                 return;
 892
 893         /* Attempt to claim larger area for request queue. */
 894         request_ring = dma_alloc_coherent(&ha->pdev->dev,
 895             (request_q_length + 1) * sizeof(request_t), &request_dma,
 896             GFP_KERNEL);
 897         if (request_ring == NULL)
 898                 return;
 899
 900         /* Resize successful, report extensions. */
 901         qla_printk(KERN_INFO, ha, "Extended memory detected (%d KB)...\n",
 902             (ha->fw_memory_size + 1) / 1024);
 903         qla_printk(KERN_INFO, ha, "Resizing request queue depth "
 904             "(%d -> %d)...\n", ha->request_q_length, request_q_length);
 905
 906         /* Clear old allocations. */
 907         dma_free_coherent(&ha->pdev->dev,
 908             (ha->request_q_length + 1) * sizeof(request_t), ha->request_ring,
 909             ha->request_dma);
 910
 911         /* Begin using larger queue. */
 912         ha->request_q_length = request_q_length;
 913         ha->request_ring = request_ring;
 914         ha->request_dma = request_dma;
 915 }
 916
 917 /**
 918  * qla2x00_setup_chip() - Load and start RISC firmware.
 919  * @ha: HA context
 920  *
 921  * Returns 0 on success.
 922  */
 923 static int
 924 qla2x00_setup_chip(scsi_qla_host_t *ha)
 925 {
 926         int rval;
 927         uint32_t srisc_address = 0;
 928         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 929         unsigned long flags;
 930
 931         if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
 932                 /* Disable SRAM, Instruction RAM and GP RAM parity.  */
 933                 spin_lock_irqsave(&ha->hardware_lock, flags);
 934                 WRT_REG_WORD(&reg->hccr, (HCCR_ENABLE_PARITY + 0x0));
 935                 RD_REG_WORD(&reg->hccr);
 936                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 937         }
 938
 939         /* Load firmware sequences */
 940         rval = ha->isp_ops->load_risc(ha, &srisc_address);
 941         if (rval == QLA_SUCCESS) {
 942                 DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
 943                     "code.\n", ha->host_no));
 944
 945                 rval = qla2x00_verify_checksum(ha, srisc_address);
 946                 if (rval == QLA_SUCCESS) {
 947                         /* Start firmware execution. */
 948                         DEBUG(printk("scsi(%ld): Checksum OK, start "
 949                             "firmware.\n", ha->host_no));
 950
 951                         rval = qla2x00_execute_fw(ha, srisc_address);
 952                         /* Retrieve firmware information. */
 953                         if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
 954                                 qla2x00_get_fw_version(ha,
 955                                     &ha->fw_major_version,
 956                                     &ha->fw_minor_version,
 957                                     &ha->fw_subminor_version,
 958                                     &ha->fw_attributes, &ha->fw_memory_size);
 959                                 qla2x00_resize_request_q(ha);
 960                                 ha->flags.npiv_supported = 0;
 961                                 if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
 962                                     (ha->fw_attributes & BIT_2)) {
 963                                         ha->flags.npiv_supported = 1;
 964                                         if ((!ha->max_npiv_vports) ||
 965                                             ((ha->max_npiv_vports + 1) %
 966                                             MIN_MULTI_ID_FABRIC))
 967                                                 ha->max_npiv_vports =
 968                                                     MIN_MULTI_ID_FABRIC - 1;
 969                                 }
 970
 971                                 if (ql2xallocfwdump)
 972                                         qla2x00_alloc_fw_dump(ha);
 973                         }
 974                 } else {
 975                         DEBUG2(printk(KERN_INFO
 976                             "scsi(%ld): ISP Firmware failed checksum.\n",
 977                             ha->host_no));
 978                 }
 979         }
 980
 981         if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
 982                 /* Enable proper parity. */
 983                 spin_lock_irqsave(&ha->hardware_lock, flags);
 984                 if (IS_QLA2300(ha))
 985                         /* SRAM parity */
 986                         WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x1);
 987                 else
 988                         /* SRAM, Instruction RAM and GP RAM parity */
 989                         WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x7);
 990                 RD_REG_WORD(&reg->hccr);
 991                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 992         }
 993
 994         if (rval) {
 995                 DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
 996                     ha->host_no));
 997         }
 998
 999         return (rval);
1000 }
1001
1002 /**
1003  * qla2x00_init_response_q_entries() - Initializes response queue entries.
1004  * @ha: HA context
1005  *
1006  * Beginning of request ring has initialization control block already built
1007  * by nvram config routine.
1008  *
1009  * Returns 0 on success.
1010  */
1011 static void
1012 qla2x00_init_response_q_entries(scsi_qla_host_t *ha)
1013 {
1014         uint16_t cnt;
1015         response_t *pkt;
1016
1017         pkt = ha->response_ring_ptr;
1018         for (cnt = 0; cnt < ha->response_q_length; cnt++) {
1019                 pkt->signature = RESPONSE_PROCESSED;
1020                 pkt++;
1021         }
1022
1023 }
1024
1025 /**
1026  * qla2x00_update_fw_options() - Read and process firmware options.
1027  * @ha: HA context
1028  *
1029  * Returns 0 on success.
1030  */
1031 void
1032 qla2x00_update_fw_options(scsi_qla_host_t *ha)
1033 {
1034         uint16_t swing, emphasis, tx_sens, rx_sens;
1035
1036         memset(ha->fw_options, 0, sizeof(ha->fw_options));
1037         qla2x00_get_fw_options(ha, ha->fw_options);
1038
1039         if (IS_QLA2100(ha) || IS_QLA2200(ha))
1040                 return;
1041
1042         /* Serial Link options. */
1043         DEBUG3(printk("scsi(%ld): Serial link options:\n",
1044             ha->host_no));
1045         DEBUG3(qla2x00_dump_buffer((uint8_t *)&ha->fw_seriallink_options,
1046             sizeof(ha->fw_seriallink_options)));
1047
1048         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1049         if (ha->fw_seriallink_options[3] & BIT_2) {
1050                 ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING;
1051
1052                 /*  1G settings */
1053                 swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);
1054                 emphasis = (ha->fw_seriallink_options[2] &
1055                     (BIT_4 | BIT_3)) >> 3;
1056                 tx_sens = ha->fw_seriallink_options[0] &
1057                     (BIT_3 | BIT_2 | BIT_1 | BIT_0);
1058                 rx_sens = (ha->fw_seriallink_options[0] &
1059                     (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
1060                 ha->fw_options[10] = (emphasis << 14) | (swing << 8);
1061                 if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
1062                         if (rx_sens == 0x0)
1063                                 rx_sens = 0x3;
1064                         ha->fw_options[10] |= (tx_sens << 4) | rx_sens;
1065                 } else if (IS_QLA2322(ha) || IS_QLA6322(ha))
1066                         ha->fw_options[10] |= BIT_5 |
1067                             ((rx_sens & (BIT_1 | BIT_0)) << 2) |
1068                             (tx_sens & (BIT_1 | BIT_0));
1069
1070                 /*  2G settings */
1071                 swing = (ha->fw_seriallink_options[2] &
1072                     (BIT_7 | BIT_6 | BIT_5)) >> 5;
1073                 emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);
1074                 tx_sens = ha->fw_seriallink_options[1] &
1075                     (BIT_3 | BIT_2 | BIT_1 | BIT_0);
1076                 rx_sens = (ha->fw_seriallink_options[1] &
1077                     (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
1078                 ha->fw_options[11] = (emphasis << 14) | (swing << 8);
1079                 if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
1080                         if (rx_sens == 0x0)
1081                                 rx_sens = 0x3;
1082                         ha->fw_options[11] |= (tx_sens << 4) | rx_sens;
1083                 } else if (IS_QLA2322(ha) || IS_QLA6322(ha))
1084                         ha->fw_options[11] |= BIT_5 |
1085                             ((rx_sens & (BIT_1 | BIT_0)) << 2) |
1086                             (tx_sens & (BIT_1 | BIT_0));
1087         }
1088
1089         /* FCP2 options. */
1090         /*  Return command IOCBs without waiting for an ABTS to complete. */
1091         ha->fw_options[3] |= BIT_13;
1092
1093         /* LED scheme. */
1094         if (ha->flags.enable_led_scheme)
1095                 ha->fw_options[2] |= BIT_12;
1096
1097         /* Detect ISP6312. */
1098         if (IS_QLA6312(ha))
1099                 ha->fw_options[2] |= BIT_13;
1100
1101         /* Update firmware options. */
1102         qla2x00_set_fw_options(ha, ha->fw_options);
1103 }
1104
1105 void
1106 qla24xx_update_fw_options(scsi_qla_host_t *ha)
1107 {
1108         int rval;
1109
1110         /* Update Serial Link options. */
1111         if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
1112                 return;
1113
1114         rval = qla2x00_set_serdes_params(ha,
1115             le16_to_cpu(ha->fw_seriallink_options24[1]),
1116             le16_to_cpu(ha->fw_seriallink_options24[2]),
1117             le16_to_cpu(ha->fw_seriallink_options24[3]));
1118         if (rval != QLA_SUCCESS) {
1119                 qla_printk(KERN_WARNING, ha,
1120                     "Unable to update Serial Link options (%x).\n", rval);
1121         }
1122 }
1123
1124 void
1125 qla2x00_config_rings(struct scsi_qla_host *ha)
1126 {
1127         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1128
1129         /* Setup ring parameters in initialization control block. */
1130         ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
1131         ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0);
1132         ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length);
1133         ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length);
1134         ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
1135         ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
1136         ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
1137         ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
1138
1139         WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
1140         WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
1141         WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
1142         WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
1143         RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg));            /* PCI Posting. */
1144 }
1145
1146 void
1147 qla24xx_config_rings(struct scsi_qla_host *ha)
1148 {
1149         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1150         struct init_cb_24xx *icb;
1151
1152         /* Setup ring parameters in initialization control block. */
1153         icb = (struct init_cb_24xx *)ha->init_cb;
1154         icb->request_q_outpointer = __constant_cpu_to_le16(0);
1155         icb->response_q_inpointer = __constant_cpu_to_le16(0);
1156         icb->request_q_length = cpu_to_le16(ha->request_q_length);
1157         icb->response_q_length = cpu_to_le16(ha->response_q_length);
1158         icb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
1159         icb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
1160         icb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
1161         icb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
1162
1163         WRT_REG_DWORD(&reg->req_q_in, 0);
1164         WRT_REG_DWORD(&reg->req_q_out, 0);
1165         WRT_REG_DWORD(&reg->rsp_q_in, 0);
1166         WRT_REG_DWORD(&reg->rsp_q_out, 0);
1167         RD_REG_DWORD(&reg->rsp_q_out);
1168 }
1169
1170 /**
1171  * qla2x00_init_rings() - Initializes firmware.
1172  * @ha: HA context
1173  *
1174  * Beginning of request ring has initialization control block already built
1175  * by nvram config routine.
1176  *
1177  * Returns 0 on success.
1178  */
1179 static int
1180 qla2x00_init_rings(scsi_qla_host_t *ha)
1181 {
1182         int     rval;
1183         unsigned long flags = 0;
1184         int cnt;
1185         struct mid_init_cb_24xx *mid_init_cb =
1186             (struct mid_init_cb_24xx *) ha->init_cb;
1187
1188         spin_lock_irqsave(&ha->hardware_lock, flags);
1189
1190         /* Clear outstanding commands array. */
1191         for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
1192                 ha->outstanding_cmds[cnt] = NULL;
1193
1194         ha->current_outstanding_cmd = 0;
1195
1196         /* Clear RSCN queue. */
1197         ha->rscn_in_ptr = 0;
1198         ha->rscn_out_ptr = 0;
1199
1200         /* Initialize firmware. */
1201         ha->request_ring_ptr  = ha->request_ring;
1202         ha->req_ring_index    = 0;
1203         ha->req_q_cnt         = ha->request_q_length;
1204         ha->response_ring_ptr = ha->response_ring;
1205         ha->rsp_ring_index    = 0;
1206
1207         /* Initialize response queue entries */
1208         qla2x00_init_response_q_entries(ha);
1209
1210         ha->isp_ops->config_rings(ha);
1211
1212         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1213
1214         /* Update any ISP specific firmware options before initialization. */
1215         ha->isp_ops->update_fw_options(ha);
1216
1217         DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
1218
1219         if (ha->flags.npiv_supported)
1220                 mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
1221
1222         mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
1223
1224         rval = qla2x00_init_firmware(ha, ha->init_cb_size);
1225         if (rval) {
1226                 DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
1227                     ha->host_no));
1228         } else {
1229                 DEBUG3(printk("scsi(%ld): Init firmware -- success.\n",
1230                     ha->host_no));
1231         }
1232
1233         return (rval);
1234 }
1235
1236 /**
1237  * qla2x00_fw_ready() - Waits for firmware ready.
1238  * @ha: HA context
1239  *
1240  * Returns 0 on success.
1241  */
1242 static int
1243 qla2x00_fw_ready(scsi_qla_host_t *ha)
1244 {
1245         int             rval;
1246         unsigned long   wtime, mtime;
1247         uint16_t        min_wait;       /* Minimum wait time if loop is down */
1248         uint16_t        wait_time;      /* Wait time if loop is coming ready */
1249         uint16_t        fw_state;
1250
1251         rval = QLA_SUCCESS;
1252
1253         /* 20 seconds for loop down. */
1254         min_wait = 20;
1255
1256         /*
1257          * Firmware should take at most one RATOV to login, plus 5 seconds for
1258          * our own processing.
1259          */
1260         if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) {
1261                 wait_time = min_wait;
1262         }
1263
1264         /* Min wait time if loop down */
1265         mtime = jiffies + (min_wait * HZ);
1266
1267         /* wait time before firmware ready */
1268         wtime = jiffies + (wait_time * HZ);
1269
1270         /* Wait for ISP to finish LIP */
1271         if (!ha->flags.init_done)
1272                 qla_printk(KERN_INFO, ha, "Waiting for LIP to complete...\n");
1273
1274         DEBUG3(printk("scsi(%ld): Waiting for LIP to complete...\n",
1275             ha->host_no));
1276
1277         do {
1278                 rval = qla2x00_get_firmware_state(ha, &fw_state);
1279                 if (rval == QLA_SUCCESS) {
1280                         if (fw_state < FSTATE_LOSS_OF_SYNC) {
1281                                 ha->device_flags &= ~DFLG_NO_CABLE;
1282                         }
1283                         if (fw_state == FSTATE_READY) {
1284                                 DEBUG(printk("scsi(%ld): F/W Ready - OK \n",
1285                                     ha->host_no));
1286
1287                                 qla2x00_get_retry_cnt(ha, &ha->retry_count,
1288                                     &ha->login_timeout, &ha->r_a_tov);
1289
1290                                 rval = QLA_SUCCESS;
1291                                 break;
1292                         }
1293
1294                         rval = QLA_FUNCTION_FAILED;
1295
1296                         if (atomic_read(&ha->loop_down_timer) &&
1297                             fw_state != FSTATE_READY) {
1298                                 /* Loop down. Timeout on min_wait for states
1299                                  * other than Wait for Login.
1300                                  */
1301                                 if (time_after_eq(jiffies, mtime)) {
1302                                         qla_printk(KERN_INFO, ha,
1303                                             "Cable is unplugged...\n");
1304
1305                                         ha->device_flags |= DFLG_NO_CABLE;
1306                                         break;
1307                                 }
1308                         }
1309                 } else {
1310                         /* Mailbox cmd failed. Timeout on min_wait. */
1311                         if (time_after_eq(jiffies, mtime))
1312                                 break;
1313                 }
1314
1315                 if (time_after_eq(jiffies, wtime))
1316                         break;
1317
1318                 /* Delay for a while */
1319                 msleep(500);
1320
1321                 DEBUG3(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
1322                     ha->host_no, fw_state, jiffies));
1323         } while (1);
1324
1325         DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
1326             ha->host_no, fw_state, jiffies));
1327
1328         if (rval) {
1329                 DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
1330                     ha->host_no));
1331         }
1332
1333         return (rval);
1334 }
1335
1336 /*
1337 *  qla2x00_configure_hba
1338 *      Setup adapter context.
1339 *
1340 * Input:
1341 *      ha = adapter state pointer.
1342 *
1343 * Returns:
1344 *      0 = success
1345 *
1346 * Context:
1347 *      Kernel context.
1348 */
1349 static int
1350 qla2x00_configure_hba(scsi_qla_host_t *ha)
1351 {
1352         int       rval;
1353         uint16_t      loop_id;
1354         uint16_t      topo;
1355         uint16_t      sw_cap;
1356         uint8_t       al_pa;
1357         uint8_t       area;
1358         uint8_t       domain;
1359         char            connect_type[22];
1360
1361         /* Get host addresses. */
1362         rval = qla2x00_get_adapter_id(ha,
1363             &loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
1364         if (rval != QLA_SUCCESS) {
1365                 if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
1366                     (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
1367                         DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
1368                             __func__, ha->host_no));
1369                 } else {
1370                         qla_printk(KERN_WARNING, ha,
1371                             "ERROR -- Unable to get host loop ID.\n");
1372                         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1373                 }
1374                 return (rval);
1375         }
1376
1377         if (topo == 4) {
1378                 qla_printk(KERN_INFO, ha,
1379                         "Cannot get topology - retrying.\n");
1380                 return (QLA_FUNCTION_FAILED);
1381         }
1382
1383         ha->loop_id = loop_id;
1384
1385         /* initialize */
1386         ha->min_external_loopid = SNS_FIRST_LOOP_ID;
1387         ha->operating_mode = LOOP;
1388         ha->switch_cap = 0;
1389
1390         switch (topo) {
1391         case 0:
1392                 DEBUG3(printk("scsi(%ld): HBA in NL topology.\n",
1393                     ha->host_no));
1394                 ha->current_topology = ISP_CFG_NL;
1395                 strcpy(connect_type, "(Loop)");
1396                 break;
1397
1398         case 1:
1399                 DEBUG3(printk("scsi(%ld): HBA in FL topology.\n",
1400                     ha->host_no));
1401                 ha->switch_cap = sw_cap;
1402                 ha->current_topology = ISP_CFG_FL;
1403                 strcpy(connect_type, "(FL_Port)");
1404                 break;
1405
1406         case 2:
1407                 DEBUG3(printk("scsi(%ld): HBA in N P2P topology.\n",
1408                     ha->host_no));
1409                 ha->operating_mode = P2P;
1410                 ha->current_topology = ISP_CFG_N;
1411                 strcpy(connect_type, "(N_Port-to-N_Port)");
1412                 break;
1413
1414         case 3:
1415                 DEBUG3(printk("scsi(%ld): HBA in F P2P topology.\n",
1416                     ha->host_no));
1417                 ha->switch_cap = sw_cap;
1418                 ha->operating_mode = P2P;
1419                 ha->current_topology = ISP_CFG_F;
1420                 strcpy(connect_type, "(F_Port)");
1421                 break;
1422
1423         default:
1424                 DEBUG3(printk("scsi(%ld): HBA in unknown topology %x. "
1425                     "Using NL.\n",
1426                     ha->host_no, topo));
1427                 ha->current_topology = ISP_CFG_NL;
1428                 strcpy(connect_type, "(Loop)");
1429                 break;
1430         }
1431
1432         /* Save Host port and loop ID. */
1433         /* byte order - Big Endian */
1434         ha->d_id.b.domain = domain;
1435         ha->d_id.b.area = area;
1436         ha->d_id.b.al_pa = al_pa;
1437
1438         if (!ha->flags.init_done)
1439                 qla_printk(KERN_INFO, ha,
1440                     "Topology - %s, Host Loop address 0x%x\n",
1441                     connect_type, ha->loop_id);
1442
1443         if (rval) {
1444                 DEBUG2_3(printk("scsi(%ld): FAILED.\n", ha->host_no));
1445         } else {
1446                 DEBUG3(printk("scsi(%ld): exiting normally.\n", ha->host_no));
1447         }
1448
1449         return(rval);
1450 }
1451
1452 static inline void
1453 qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *def)
1454 {
1455         char *st, *en;
1456         uint16_t index;
1457
1458         if (memcmp(model, BINZERO, len) != 0) {
1459                 strncpy(ha->model_number, model, len);
1460                 st = en = ha->model_number;
1461                 en += len - 1;
1462                 while (en > st) {
1463                         if (*en != 0x20 && *en != 0x00)
1464                                 break;
1465                         *en-- = '\0';
1466                 }
1467
1468                 index = (ha->pdev->subsystem_device & 0xff);
1469                 if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
1470                     index < QLA_MODEL_NAMES)
1471                         ha->model_desc = qla2x00_model_name[index * 2 + 1];
1472         } else {
1473                 index = (ha->pdev->subsystem_device & 0xff);
1474                 if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
1475                     index < QLA_MODEL_NAMES) {
1476                         strcpy(ha->model_number,
1477                             qla2x00_model_name[index * 2]);
1478                         ha->model_desc = qla2x00_model_name[index * 2 + 1];
1479                 } else {
1480                         strcpy(ha->model_number, def);
1481                 }
1482         }
1483 }
1484
1485 /* On sparc systems, obtain port and node WWN from firmware
1486  * properties.
1487  */
1488 static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
1489 {
1490 #ifdef CONFIG_SPARC
1491         struct pci_dev *pdev = ha->pdev;
1492         struct device_node *dp = pci_device_to_OF_node(pdev);
1493         const u8 *val;
1494         int len;
1495
1496         val = of_get_property(dp, "port-wwn", &len);
1497         if (val && len >= WWN_SIZE)
1498                 memcpy(nv->port_name, val, WWN_SIZE);
1499
1500         val = of_get_property(dp, "node-wwn", &len);
1501         if (val && len >= WWN_SIZE)
1502                 memcpy(nv->node_name, val, WWN_SIZE);
1503 #endif
1504 }
1505
1506 /*
1507 * NVRAM configuration for ISP 2xxx
1508 *
1509 * Input:
1510 *      ha                = adapter block pointer.
1511 *
1512 * Output:
1513 *      initialization control block in response_ring
1514 *      host adapters parameters in host adapter block
1515 *
1516 * Returns:
1517 *      0 = success.
1518 */
1519 int
1520 qla2x00_nvram_config(scsi_qla_host_t *ha)
1521 {
1522         int             rval;
1523         uint8_t         chksum = 0;
1524         uint16_t        cnt;
1525         uint8_t         *dptr1, *dptr2;
1526         init_cb_t       *icb = ha->init_cb;
1527         nvram_t         *nv = ha->nvram;
1528         uint8_t         *ptr = ha->nvram;
1529         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1530
1531         rval = QLA_SUCCESS;
1532
1533         /* Determine NVRAM starting address. */
1534         ha->nvram_size = sizeof(nvram_t);
1535         ha->nvram_base = 0;
1536         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
1537                 if ((RD_REG_WORD(&reg->ctrl_status) >> 14) == 1)
1538                         ha->nvram_base = 0x80;
1539
1540         /* Get NVRAM data and calculate checksum. */
1541         ha->isp_ops->read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size);
1542         for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
1543                 chksum += *ptr++;
1544
1545         DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
1546         DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
1547
1548         /* Bad NVRAM data, set defaults parameters. */
1549         if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
1550             nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
1551                 /* Reset NVRAM data. */
1552                 qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
1553                     "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
1554                     nv->nvram_version);
1555                 qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
1556                     "invalid -- WWPN) defaults.\n");
1557
1558                 /*
1559                  * Set default initialization control block.
1560                  */
1561                 memset(nv, 0, ha->nvram_size);
1562                 nv->parameter_block_version = ICB_VERSION;
1563
1564                 if (IS_QLA23XX(ha)) {
1565                         nv->firmware_options[0] = BIT_2 | BIT_1;
1566                         nv->firmware_options[1] = BIT_7 | BIT_5;
1567                         nv->add_firmware_options[0] = BIT_5;
1568                         nv->add_firmware_options[1] = BIT_5 | BIT_4;
1569                         nv->frame_payload_size = __constant_cpu_to_le16(2048);
1570                         nv->special_options[1] = BIT_7;
1571                 } else if (IS_QLA2200(ha)) {
1572                         nv->firmware_options[0] = BIT_2 | BIT_1;
1573                         nv->firmware_options[1] = BIT_7 | BIT_5;
1574                         nv->add_firmware_options[0] = BIT_5;
1575                         nv->add_firmware_options[1] = BIT_5 | BIT_4;
1576                         nv->frame_payload_size = __constant_cpu_to_le16(1024);
1577                 } else if (IS_QLA2100(ha)) {
1578                         nv->firmware_options[0] = BIT_3 | BIT_1;
1579                         nv->firmware_options[1] = BIT_5;
1580                         nv->frame_payload_size = __constant_cpu_to_le16(1024);
1581                 }
1582
1583                 nv->max_iocb_allocation = __constant_cpu_to_le16(256);
1584                 nv->execution_throttle = __constant_cpu_to_le16(16);
1585                 nv->retry_count = 8;
1586                 nv->retry_delay = 1;
1587
1588                 nv->port_name[0] = 33;
1589                 nv->port_name[3] = 224;
1590                 nv->port_name[4] = 139;
1591
1592                 qla2xxx_nvram_wwn_from_ofw(ha, nv);
1593
1594                 nv->login_timeout = 4;
1595
1596                 /*
1597                  * Set default host adapter parameters
1598                  */
1599                 nv->host_p[1] = BIT_2;
1600                 nv->reset_delay = 5;
1601                 nv->port_down_retry_count = 8;
1602                 nv->max_luns_per_target = __constant_cpu_to_le16(8);
1603                 nv->link_down_timeout = 60;
1604
1605                 rval = 1;
1606         }
1607
1608 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
1609         /*
1610          * The SN2 does not provide BIOS emulation which means you can't change
1611          * potentially bogus BIOS settings. Force the use of default settings
1612          * for link rate and frame size.  Hope that the rest of the settings
1613          * are valid.
1614          */
1615         if (ia64_platform_is("sn2")) {
1616                 nv->frame_payload_size = __constant_cpu_to_le16(2048);
1617                 if (IS_QLA23XX(ha))
1618                         nv->special_options[1] = BIT_7;
1619         }
1620 #endif
1621
1622         /* Reset Initialization control block */
1623         memset(icb, 0, ha->init_cb_size);
1624
1625         /*
1626          * Setup driver NVRAM options.
1627          */
1628         nv->firmware_options[0] |= (BIT_6 | BIT_1);
1629         nv->firmware_options[0] &= ~(BIT_5 | BIT_4);
1630         nv->firmware_options[1] |= (BIT_5 | BIT_0);
1631         nv->firmware_options[1] &= ~BIT_4;
1632
1633         if (IS_QLA23XX(ha)) {
1634                 nv->firmware_options[0] |= BIT_2;
1635                 nv->firmware_options[0] &= ~BIT_3;
1636                 nv->add_firmware_options[1] |= BIT_5 | BIT_4;
1637
1638                 if (IS_QLA2300(ha)) {
1639                         if (ha->fb_rev == FPM_2310) {
1640                                 strcpy(ha->model_number, "QLA2310");
1641                         } else {
1642                                 strcpy(ha->model_number, "QLA2300");
1643                         }
1644                 } else {
1645                         qla2x00_set_model_info(ha, nv->model_number,
1646                             sizeof(nv->model_number), "QLA23xx");
1647                 }
1648         } else if (IS_QLA2200(ha)) {
1649                 nv->firmware_options[0] |= BIT_2;
1650                 /*
1651                  * 'Point-to-point preferred, else loop' is not a safe
1652                  * connection mode setting.
1653                  */
1654                 if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) ==
1655                     (BIT_5 | BIT_4)) {
1656                         /* Force 'loop preferred, else point-to-point'. */
1657                         nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4);
1658                         nv->add_firmware_options[0] |= BIT_5;
1659                 }
1660                 strcpy(ha->model_number, "QLA22xx");
1661         } else /*if (IS_QLA2100(ha))*/ {
1662                 strcpy(ha->model_number, "QLA2100");
1663         }
1664
1665         /*
1666          * Copy over NVRAM RISC parameter block to initialization control block.
1667          */
1668         dptr1 = (uint8_t *)icb;
1669         dptr2 = (uint8_t *)&nv->parameter_block_version;
1670         cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version;
1671         while (cnt--)
1672                 *dptr1++ = *dptr2++;
1673
1674         /* Copy 2nd half. */
1675         dptr1 = (uint8_t *)icb->add_firmware_options;
1676         cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options;
1677         while (cnt--)
1678                 *dptr1++ = *dptr2++;
1679
1680         /* Use alternate WWN? */
1681         if (nv->host_p[1] & BIT_7) {
1682                 memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
1683                 memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
1684         }
1685
1686         /* Prepare nodename */
1687         if ((icb->firmware_options[1] & BIT_6) == 0) {
1688                 /*
1689                  * Firmware will apply the following mask if the nodename was
1690                  * not provided.
1691                  */
1692                 memcpy(icb->node_name, icb->port_name, WWN_SIZE);
1693                 icb->node_name[0] &= 0xF0;
1694         }
1695
1696         /*
1697          * Set host adapter parameters.
1698          */
1699         if (nv->host_p[0] & BIT_7)
1700                 ql2xextended_error_logging = 1;
1701         ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
1702         /* Always load RISC code on non ISP2[12]00 chips. */
1703         if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
1704                 ha->flags.disable_risc_code_load = 0;
1705         ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
1706         ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
1707         ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
1708         ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
1709         ha->flags.disable_serdes = 0;
1710
1711         ha->operating_mode =
1712             (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
1713
1714         memcpy(ha->fw_seriallink_options, nv->seriallink_options,
1715             sizeof(ha->fw_seriallink_options));
1716
1717         /* save HBA serial number */
1718         ha->serial0 = icb->port_name[5];
1719         ha->serial1 = icb->port_name[6];
1720         ha->serial2 = icb->port_name[7];
1721         ha->node_name = icb->node_name;
1722         ha->port_name = icb->port_name;
1723
1724         icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
1725
1726         ha->retry_count = nv->retry_count;
1727
1728         /* Set minimum login_timeout to 4 seconds. */
1729         if (nv->login_timeout < ql2xlogintimeout)
1730                 nv->login_timeout = ql2xlogintimeout;
1731         if (nv->login_timeout < 4)
1732                 nv->login_timeout = 4;
1733         ha->login_timeout = nv->login_timeout;
1734         icb->login_timeout = nv->login_timeout;
1735
1736         /* Set minimum RATOV to 200 tenths of a second. */
1737         ha->r_a_tov = 200;
1738
1739         ha->loop_reset_delay = nv->reset_delay;
1740
1741         /* Link Down Timeout = 0:
1742          *
1743          *      When Port Down timer expires we will start returning
1744          *      I/O's to OS with "DID_NO_CONNECT".
1745          *
1746          * Link Down Timeout != 0:
1747          *
1748          *       The driver waits for the link to come up after link down
1749          *       before returning I/Os to OS with "DID_NO_CONNECT".
1750          */
1751         if (nv->link_down_timeout == 0) {
1752                 ha->loop_down_abort_time =
1753                     (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
1754         } else {
1755                 ha->link_down_timeout =  nv->link_down_timeout;
1756                 ha->loop_down_abort_time =
1757                     (LOOP_DOWN_TIME - ha->link_down_timeout);
1758         }
1759
1760         /*
1761          * Need enough time to try and get the port back.
1762          */
1763         ha->port_down_retry_count = nv->port_down_retry_count;
1764         if (qlport_down_retry)
1765                 ha->port_down_retry_count = qlport_down_retry;
1766         /* Set login_retry_count */
1767         ha->login_retry_count  = nv->retry_count;
1768         if (ha->port_down_retry_count == nv->port_down_retry_count &&
1769             ha->port_down_retry_count > 3)
1770                 ha->login_retry_count = ha->port_down_retry_count;
1771         else if (ha->port_down_retry_count > (int)ha->login_retry_count)
1772                 ha->login_retry_count = ha->port_down_retry_count;
1773         if (ql2xloginretrycount)
1774                 ha->login_retry_count = ql2xloginretrycount;
1775
1776         icb->lun_enables = __constant_cpu_to_le16(0);
1777         icb->command_resource_count = 0;
1778         icb->immediate_notify_resource_count = 0;
1779         icb->timeout = __constant_cpu_to_le16(0);
1780
1781         if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1782                 /* Enable RIO */
1783                 icb->firmware_options[0] &= ~BIT_3;
1784                 icb->add_firmware_options[0] &=
1785                     ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
1786                 icb->add_firmware_options[0] |= BIT_2;
1787                 icb->response_accumulation_timer = 3;
1788                 icb->interrupt_delay_timer = 5;
1789
1790                 ha->flags.process_response_queue = 1;
1791         } else {
1792                 /* Enable ZIO. */
1793                 if (!ha->flags.init_done) {
1794                         ha->zio_mode = icb->add_firmware_options[0] &
1795                             (BIT_3 | BIT_2 | BIT_1 | BIT_0);
1796                         ha->zio_timer = icb->interrupt_delay_timer ?
1797                             icb->interrupt_delay_timer: 2;
1798                 }
1799                 icb->add_firmware_options[0] &=
1800                     ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
1801                 ha->flags.process_response_queue = 0;
1802                 if (ha->zio_mode != QLA_ZIO_DISABLED) {
1803                         ha->zio_mode = QLA_ZIO_MODE_6;
1804
1805                         DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
1806                             "delay (%d us).\n", ha->host_no, ha->zio_mode,
1807                             ha->zio_timer * 100));
1808                         qla_printk(KERN_INFO, ha,
1809                             "ZIO mode %d enabled; timer delay (%d us).\n",
1810                             ha->zio_mode, ha->zio_timer * 100);
1811
1812                         icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode;
1813                         icb->interrupt_delay_timer = (uint8_t)ha->zio_timer;
1814                         ha->flags.process_response_queue = 1;
1815                 }
1816         }
1817
1818         if (rval) {
1819                 DEBUG2_3(printk(KERN_WARNING
1820                     "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
1821         }
1822         return (rval);
1823 }
1824
1825 static void
1826 qla2x00_rport_del(void *data)
1827 {
1828         fc_port_t *fcport = data;
1829         struct fc_rport *rport;
1830         unsigned long flags;
1831
1832         spin_lock_irqsave(&fcport->rport_lock, flags);
1833         rport = fcport->drport;
1834         fcport->drport = NULL;
1835         spin_unlock_irqrestore(&fcport->rport_lock, flags);
1836         if (rport)
1837                 fc_remote_port_delete(rport);
1838 }
1839
1840 /**
1841  * qla2x00_alloc_fcport() - Allocate a generic fcport.
1842  * @ha: HA context
1843  * @flags: allocation flags
1844  *
1845  * Returns a pointer to the allocated fcport, or NULL, if none available.
1846  */
1847 static fc_port_t *
1848 qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
1849 {
1850         fc_port_t *fcport;
1851
1852         fcport = kzalloc(sizeof(fc_port_t), flags);
1853         if (!fcport)
1854                 return NULL;
1855
1856         /* Setup fcport template structure. */
1857         fcport->ha = ha;
1858         fcport->vp_idx = ha->vp_idx;
1859         fcport->port_type = FCT_UNKNOWN;
1860         fcport->loop_id = FC_NO_LOOP_ID;
1861         atomic_set(&fcport->state, FCS_UNCONFIGURED);
1862         fcport->flags = FCF_RLC_SUPPORT;
1863         fcport->supported_classes = FC_COS_UNSPECIFIED;
1864         spin_lock_init(&fcport->rport_lock);
1865
1866         return fcport;
1867 }
1868
1869 /*
1870  * qla2x00_configure_loop
1871  *      Updates Fibre Channel Device Database with what is actually on loop.
1872  *
1873  * Input:
1874  *      ha                = adapter block pointer.
1875  *
1876  * Returns:
1877  *      0 = success.
1878  *      1 = error.
1879  *      2 = database was full and device was not configured.
1880  */
1881 static int
1882 qla2x00_configure_loop(scsi_qla_host_t *ha)
1883 {
1884         int  rval;
1885         unsigned long flags, save_flags;
1886
1887         rval = QLA_SUCCESS;
1888
1889         /* Get Initiator ID */
1890         if (test_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags)) {
1891                 rval = qla2x00_configure_hba(ha);
1892                 if (rval != QLA_SUCCESS) {
1893                         DEBUG(printk("scsi(%ld): Unable to configure HBA.\n",
1894                             ha->host_no));
1895                         return (rval);
1896                 }
1897         }
1898
1899         save_flags = flags = ha->dpc_flags;
1900         DEBUG(printk("scsi(%ld): Configure loop -- dpc flags =0x%lx\n",
1901             ha->host_no, flags));
1902
1903         /*
1904          * If we have both an RSCN and PORT UPDATE pending then handle them
1905          * both at the same time.
1906          */
1907         clear_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
1908         clear_bit(RSCN_UPDATE, &ha->dpc_flags);
1909
1910         /* Determine what we need to do */
1911         if (ha->current_topology == ISP_CFG_FL &&
1912             (test_bit(LOCAL_LOOP_UPDATE, &flags))) {
1913
1914                 ha->flags.rscn_queue_overflow = 1;
1915                 set_bit(RSCN_UPDATE, &flags);
1916
1917         } else if (ha->current_topology == ISP_CFG_F &&
1918             (test_bit(LOCAL_LOOP_UPDATE, &flags))) {
1919
1920                 ha->flags.rscn_queue_overflow = 1;
1921                 set_bit(RSCN_UPDATE, &flags);
1922                 clear_bit(LOCAL_LOOP_UPDATE, &flags);
1923
1924         } else if (ha->current_topology == ISP_CFG_N) {
1925                 clear_bit(RSCN_UPDATE, &flags);
1926
1927         } else if (!ha->flags.online ||
1928             (test_bit(ABORT_ISP_ACTIVE, &flags))) {
1929
1930                 ha->flags.rscn_queue_overflow = 1;
1931                 set_bit(RSCN_UPDATE, &flags);
1932                 set_bit(LOCAL_LOOP_UPDATE, &flags);
1933         }
1934
1935         if (test_bit(LOCAL_LOOP_UPDATE, &flags)) {
1936                 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
1937                         rval = QLA_FUNCTION_FAILED;
1938                 } else {
1939                         rval = qla2x00_configure_local_loop(ha);
1940                 }
1941         }
1942
1943         if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
1944                 if (LOOP_TRANSITION(ha)) {
1945                         rval = QLA_FUNCTION_FAILED;
1946                 } else {
1947                         rval = qla2x00_configure_fabric(ha);
1948                 }
1949         }
1950
1951         if (rval == QLA_SUCCESS) {
1952                 if (atomic_read(&ha->loop_down_timer) ||
1953                     test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
1954                         rval = QLA_FUNCTION_FAILED;
1955                 } else {
1956                         atomic_set(&ha->loop_state, LOOP_READY);
1957
1958                         DEBUG(printk("scsi(%ld): LOOP READY\n", ha->host_no));
1959                 }
1960         }
1961
1962         if (rval) {
1963                 DEBUG2_3(printk("%s(%ld): *** FAILED ***\n",
1964                     __func__, ha->host_no));
1965         } else {
1966                 DEBUG3(printk("%s: exiting normally\n", __func__));
1967         }
1968
1969         /* Restore state if a resync event occured during processing */
1970         if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
1971                 if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
1972                         set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
1973                 if (test_bit(RSCN_UPDATE, &save_flags))
1974                         set_bit(RSCN_UPDATE, &ha->dpc_flags);
1975         }
1976
1977         return (rval);
1978 }
1979
1980
1981
1982 /*
1983  * qla2x00_configure_local_loop
1984  *      Updates Fibre Channel Device Database with local loop devices.
1985  *
1986  * Input:
1987  *      ha = adapter block pointer.
1988  *
1989  * Returns:
1990  *      0 = success.
1991  */
1992 static int
1993 qla2x00_configure_local_loop(scsi_qla_host_t *ha)
1994 {
1995         int             rval, rval2;
1996         int             found_devs;
1997         int             found;
1998         fc_port_t       *fcport, *new_fcport;
1999
2000         uint16_t        index;
2001         uint16_t        entries;
2002         char            *id_iter;
2003         uint16_t        loop_id;
2004         uint8_t         domain, area, al_pa;
2005         scsi_qla_host_t *pha = to_qla_parent(ha);
2006
2007         found_devs = 0;
2008         new_fcport = NULL;
2009         entries = MAX_FIBRE_DEVICES;
2010
2011         DEBUG3(printk("scsi(%ld): Getting FCAL position map\n", ha->host_no));
2012         DEBUG3(qla2x00_get_fcal_position_map(ha, NULL));
2013
2014         /* Get list of logged in devices. */
2015         memset(ha->gid_list, 0, GID_LIST_SIZE);
2016         rval = qla2x00_get_id_list(ha, ha->gid_list, ha->gid_list_dma,
2017             &entries);
2018         if (rval != QLA_SUCCESS)
2019                 goto cleanup_allocation;
2020
2021         DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
2022             ha->host_no, entries));
2023         DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
2024             entries * sizeof(struct gid_list_info)));
2025
2026         /* Allocate temporary fcport for any new fcports discovered. */
2027         new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
2028         if (new_fcport == NULL) {
2029                 rval = QLA_MEMORY_ALLOC_FAILED;
2030                 goto cleanup_allocation;
2031         }
2032         new_fcport->flags &= ~FCF_FABRIC_DEVICE;
2033
2034         /*
2035          * Mark local devices that were present with FCF_DEVICE_LOST for now.
2036          */
2037         list_for_each_entry(fcport, &pha->fcports, list) {
2038                 if (fcport->vp_idx != ha->vp_idx)
2039                         continue;
2040
2041                 if (atomic_read(&fcport->state) == FCS_ONLINE &&
2042                     fcport->port_type != FCT_BROADCAST &&
2043                     (fcport->flags & FCF_FABRIC_DEVICE) == 0) {
2044
2045                         DEBUG(printk("scsi(%ld): Marking port lost, "
2046                             "loop_id=0x%04x\n",
2047                             ha->host_no, fcport->loop_id));
2048
2049                         atomic_set(&fcport->state, FCS_DEVICE_LOST);
2050                         fcport->flags &= ~FCF_FARP_DONE;
2051                 }
2052         }
2053
2054         /* Add devices to port list. */
2055         id_iter = (char *)ha->gid_list;
2056         for (index = 0; index < entries; index++) {
2057                 domain = ((struct gid_list_info *)id_iter)->domain;
2058                 area = ((struct gid_list_info *)id_iter)->area;
2059                 al_pa = ((struct gid_list_info *)id_iter)->al_pa;
2060                 if (IS_QLA2100(ha) || IS_QLA2200(ha))
2061                         loop_id = (uint16_t)
2062                             ((struct gid_list_info *)id_iter)->loop_id_2100;
2063                 else
2064                         loop_id = le16_to_cpu(
2065                             ((struct gid_list_info *)id_iter)->loop_id);
2066                 id_iter += ha->gid_list_info_size;
2067
2068                 /* Bypass reserved domain fields. */
2069                 if ((domain & 0xf0) == 0xf0)
2070                         continue;
2071
2072                 /* Bypass if not same domain and area of adapter. */
2073                 if (area && domain &&
2074                     (area != ha->d_id.b.area || domain != ha->d_id.b.domain))
2075                         continue;
2076
2077                 /* Bypass invalid local loop ID. */
2078                 if (loop_id > LAST_LOCAL_LOOP_ID)
2079                         continue;
2080
2081                 /* Fill in member data. */
2082                 new_fcport->d_id.b.domain = domain;
2083                 new_fcport->d_id.b.area = area;
2084                 new_fcport->d_id.b.al_pa = al_pa;
2085                 new_fcport->loop_id = loop_id;
2086                 new_fcport->vp_idx = ha->vp_idx;
2087                 rval2 = qla2x00_get_port_database(ha, new_fcport, 0);
2088                 if (rval2 != QLA_SUCCESS) {
2089                         DEBUG2(printk("scsi(%ld): Failed to retrieve fcport "
2090                             "information -- get_port_database=%x, "
2091                             "loop_id=0x%04x\n",
2092                             ha->host_no, rval2, new_fcport->loop_id));
2093                         DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
2094                             ha->host_no));
2095                         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2096                         continue;
2097                 }
2098
2099                 /* Check for matching device in port list. */
2100                 found = 0;
2101                 fcport = NULL;
2102                 list_for_each_entry(fcport, &pha->fcports, list) {
2103                         if (fcport->vp_idx != ha->vp_idx)
2104                                 continue;
2105
2106                         if (memcmp(new_fcport->port_name, fcport->port_name,
2107                             WWN_SIZE))
2108                                 continue;
2109
2110                         fcport->flags &= ~(FCF_FABRIC_DEVICE |
2111                             FCF_PERSISTENT_BOUND);
2112                         fcport->loop_id = new_fcport->loop_id;
2113                         fcport->port_type = new_fcport->port_type;
2114                         fcport->d_id.b24 = new_fcport->d_id.b24;
2115                         memcpy(fcport->node_name, new_fcport->node_name,
2116                             WWN_SIZE);
2117
2118                         found++;
2119                         break;
2120                 }
2121
2122                 if (!found) {
2123                         /* New device, add to fcports list. */
2124                         new_fcport->flags &= ~FCF_PERSISTENT_BOUND;
2125                         if (ha->parent) {
2126                                 new_fcport->ha = ha;
2127                                 new_fcport->vp_idx = ha->vp_idx;
2128                                 list_add_tail(&new_fcport->vp_fcport,
2129                                     &ha->vp_fcports);
2130                         }
2131                         list_add_tail(&new_fcport->list, &pha->fcports);
2132
2133                         /* Allocate a new replacement fcport. */
2134                         fcport = new_fcport;
2135                         new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
2136                         if (new_fcport == NULL) {
2137                                 rval = QLA_MEMORY_ALLOC_FAILED;
2138                                 goto cleanup_allocation;
2139                         }
2140                         new_fcport->flags &= ~FCF_FABRIC_DEVICE;
2141                 }
2142
2143                 /* Base iIDMA settings on HBA port speed. */
2144                 fcport->fp_speed = ha->link_data_rate;
2145
2146                 qla2x00_update_fcport(ha, fcport);
2147
2148                 found_devs++;
2149         }
2150
2151 cleanup_allocation:
2152         kfree(new_fcport);
2153
2154         if (rval != QLA_SUCCESS) {
2155                 DEBUG2(printk("scsi(%ld): Configure local loop error exit: "
2156                     "rval=%x\n", ha->host_no, rval));
2157         }
2158
2159         if (found_devs) {
2160                 ha->device_flags |= DFLG_LOCAL_DEVICES;
2161                 ha->device_flags &= ~DFLG_RETRY_LOCAL_DEVICES;
2162         }
2163
2164         return (rval);
2165 }
2166
2167 static void
2168 qla2x00_probe_for_all_luns(scsi_qla_host_t *ha)
2169 {
2170         fc_port_t       *fcport;
2171
2172         qla2x00_mark_all_devices_lost(ha, 0);
2173         list_for_each_entry(fcport, &ha->fcports, list) {
2174                 if (fcport->port_type != FCT_TARGET)
2175                         continue;
2176
2177                 qla2x00_update_fcport(ha, fcport);
2178         }
2179 }
2180
2181 static void
2182 qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
2183 {
2184 #define LS_UNKNOWN      2
2185         static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
2186         int rval;
2187         uint16_t mb[6];
2188
2189         if (!IS_IIDMA_CAPABLE(ha))
2190                 return;
2191
2192         if (fcport->fp_speed == PORT_SPEED_UNKNOWN ||
2193             fcport->fp_speed > ha->link_data_rate)
2194                 return;
2195
2196         rval = qla2x00_set_idma_speed(ha, fcport->loop_id, fcport->fp_speed,
2197             mb);
2198         if (rval != QLA_SUCCESS) {
2199                 DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA "
2200                     "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n",
2201                     ha->host_no, fcport->port_name[0], fcport->port_name[1],
2202                     fcport->port_name[2], fcport->port_name[3],
2203                     fcport->port_name[4], fcport->port_name[5],
2204                     fcport->port_name[6], fcport->port_name[7], rval,
2205                     fcport->fp_speed, mb[0], mb[1]));
2206         } else {
2207                 DEBUG2(qla_printk(KERN_INFO, ha,
2208                     "iIDMA adjusted to %s GB/s on "
2209                     "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
2210                     link_speeds[fcport->fp_speed], fcport->port_name[0],
2211                     fcport->port_name[1], fcport->port_name[2],
2212                     fcport->port_name[3], fcport->port_name[4],
2213                     fcport->port_name[5], fcport->port_name[6],
2214                     fcport->port_name[7]));
2215         }
2216 }
2217
2218 static void
2219 qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
2220 {
2221         struct fc_rport_identifiers rport_ids;
2222         struct fc_rport *rport;
2223         unsigned long flags;
2224
2225         if (fcport->drport)
2226                 qla2x00_rport_del(fcport);
2227         if (fcport->rport)
2228                 return;
2229
2230         rport_ids.node_name = wwn_to_u64(fcport->node_name);
2231         rport_ids.port_name = wwn_to_u64(fcport->port_name);
2232         rport_ids.port_id = fcport->d_id.b.domain << 16 |
2233             fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
2234         rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
2235         rport = fc_remote_port_add(ha->host, 0, &rport_ids);
2236         if (!rport) {
2237                 qla_printk(KERN_WARNING, ha,
2238                     "Unable to allocate fc remote port!\n");
2239                 return;
2240         }
2241         spin_lock_irqsave(&fcport->rport_lock, flags);
2242         fcport->rport = rport;
2243         *((fc_port_t **)rport->dd_data) = fcport;
2244         spin_unlock_irqrestore(&fcport->rport_lock, flags);
2245
2246         rport->supported_classes = fcport->supported_classes;
2247
2248         rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
2249         if (fcport->port_type == FCT_INITIATOR)
2250                 rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
2251         if (fcport->port_type == FCT_TARGET)
2252                 rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
2253         fc_remote_port_rolechg(rport, rport_ids.roles);
2254
2255         if (rport->scsi_target_id != -1 &&
2256             rport->scsi_target_id < ha->host->max_id)
2257                 fcport->os_target_id = rport->scsi_target_id;
2258 }
2259
2260 /*
2261  * qla2x00_update_fcport
2262  *      Updates device on list.
2263  *
2264  * Input:
2265  *      ha = adapter block pointer.
2266  *      fcport = port structure pointer.
2267  *
2268  * Return:
2269  *      0  - Success
2270  *  BIT_0 - error
2271  *
2272  * Context:
2273  *      Kernel context.
2274  */
2275 void
2276 qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
2277 {
2278         scsi_qla_host_t *pha = to_qla_parent(ha);
2279
2280         fcport->ha = ha;
2281         fcport->login_retry = 0;
2282         fcport->port_login_retry_count = pha->port_down_retry_count *
2283             PORT_RETRY_TIME;
2284         atomic_set(&fcport->port_down_timer, pha->port_down_retry_count *
2285             PORT_RETRY_TIME);
2286         fcport->flags &= ~FCF_LOGIN_NEEDED;
2287
2288         qla2x00_iidma_fcport(ha, fcport);
2289
2290         atomic_set(&fcport->state, FCS_ONLINE);
2291
2292         qla2x00_reg_remote_port(ha, fcport);
2293 }
2294
2295 /*
2296  * qla2x00_configure_fabric
2297  *      Setup SNS devices with loop ID's.
2298  *
2299  * Input:
2300  *      ha = adapter block pointer.
2301  *
2302  * Returns:
2303  *      0 = success.
2304  *      BIT_0 = error
2305  */
2306 static int
2307 qla2x00_configure_fabric(scsi_qla_host_t *ha)
2308 {
2309         int     rval, rval2;
2310         fc_port_t       *fcport, *fcptemp;
2311         uint16_t        next_loopid;
2312         uint16_t        mb[MAILBOX_REGISTER_COUNT];
2313         uint16_t        loop_id;
2314         LIST_HEAD(new_fcports);
2315         scsi_qla_host_t *pha = to_qla_parent(ha);
2316
2317         /* If FL port exists, then SNS is present */
2318         if (IS_FWI2_CAPABLE(ha))
2319                 loop_id = NPH_F_PORT;
2320         else
2321                 loop_id = SNS_FL_PORT;
2322         rval = qla2x00_get_port_name(ha, loop_id, ha->fabric_node_name, 1);
2323         if (rval != QLA_SUCCESS) {
2324                 DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
2325                     "Port\n", ha->host_no));
2326
2327                 ha->device_flags &= ~SWITCH_FOUND;
2328                 return (QLA_SUCCESS);
2329         }
2330         ha->device_flags |= SWITCH_FOUND;
2331
2332         /* Mark devices that need re-synchronization. */
2333         rval2 = qla2x00_device_resync(ha);
2334         if (rval2 == QLA_RSCNS_HANDLED) {
2335                 /* No point doing the scan, just continue. */
2336                 return (QLA_SUCCESS);
2337         }
2338         do {
2339                 /* FDMI support. */
2340                 if (ql2xfdmienable &&
2341                     test_and_clear_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags))
2342                         qla2x00_fdmi_register(ha);
2343
2344                 /* Ensure we are logged into the SNS. */
2345                 if (IS_FWI2_CAPABLE(ha))
2346                         loop_id = NPH_SNS;
2347                 else
2348                         loop_id = SIMPLE_NAME_SERVER;
2349                 ha->isp_ops->fabric_login(ha, loop_id, 0xff, 0xff,
2350                     0xfc, mb, BIT_1 | BIT_0);
2351                 if (mb[0] != MBS_COMMAND_COMPLETE) {
2352                         DEBUG2(qla_printk(KERN_INFO, ha,
2353                             "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
2354                             "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
2355                             mb[0], mb[1], mb[2], mb[6], mb[7]));
2356                         return (QLA_SUCCESS);
2357                 }
2358
2359                 if (test_and_clear_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags)) {
2360                         if (qla2x00_rft_id(ha)) {
2361                                 /* EMPTY */
2362                                 DEBUG2(printk("scsi(%ld): Register FC-4 "
2363                                     "TYPE failed.\n", ha->host_no));
2364                         }
2365                         if (qla2x00_rff_id(ha)) {
2366                                 /* EMPTY */
2367                                 DEBUG2(printk("scsi(%ld): Register FC-4 "
2368                                     "Features failed.\n", ha->host_no));
2369                         }
2370                         if (qla2x00_rnn_id(ha)) {
2371                                 /* EMPTY */
2372                                 DEBUG2(printk("scsi(%ld): Register Node Name "
2373                                     "failed.\n", ha->host_no));
2374                         } else if (qla2x00_rsnn_nn(ha)) {
2375                                 /* EMPTY */
2376                                 DEBUG2(printk("scsi(%ld): Register Symbolic "
2377                                     "Node Name failed.\n", ha->host_no));
2378                         }
2379                 }
2380
2381                 rval = qla2x00_find_all_fabric_devs(ha, &new_fcports);
2382                 if (rval != QLA_SUCCESS)
2383                         break;
2384
2385                 /*
2386                  * Logout all previous fabric devices marked lost, except
2387                  * tape devices.
2388                  */
2389                 list_for_each_entry(fcport, &pha->fcports, list) {
2390                         if (fcport->vp_idx !=ha->vp_idx)
2391                                 continue;
2392
2393                         if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2394                                 break;
2395
2396                         if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
2397                                 continue;
2398
2399                         if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2400                                 qla2x00_mark_device_lost(ha, fcport,
2401                                     ql2xplogiabsentdevice, 0);
2402                                 if (fcport->loop_id != FC_NO_LOOP_ID &&
2403                                     (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
2404                                     fcport->port_type != FCT_INITIATOR &&
2405                                     fcport->port_type != FCT_BROADCAST) {
2406                                         ha->isp_ops->fabric_logout(ha,
2407                                             fcport->loop_id,
2408                                             fcport->d_id.b.domain,
2409                                             fcport->d_id.b.area,
2410                                             fcport->d_id.b.al_pa);
2411                                         fcport->loop_id = FC_NO_LOOP_ID;
2412                                 }
2413                         }
2414                 }
2415
2416                 /* Starting free loop ID. */
2417                 next_loopid = pha->min_external_loopid;
2418
2419                 /*
2420                  * Scan through our port list and login entries that need to be
2421                  * logged in.
2422                  */
2423                 list_for_each_entry(fcport, &pha->fcports, list) {
2424                         if (fcport->vp_idx != ha->vp_idx)
2425                                 continue;
2426
2427                         if (atomic_read(&ha->loop_down_timer) ||
2428                             test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2429                                 break;
2430
2431                         if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
2432                             (fcport->flags & FCF_LOGIN_NEEDED) == 0)
2433                                 continue;
2434
2435                         if (fcport->loop_id == FC_NO_LOOP_ID) {
2436                                 fcport->loop_id = next_loopid;
2437                                 rval = qla2x00_find_new_loop_id(ha, fcport);
2438                                 if (rval != QLA_SUCCESS) {
2439                                         /* Ran out of IDs to use */
2440                                         break;
2441                                 }
2442                         }
2443                         /* Login and update database */
2444                         qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
2445                 }
2446
2447                 /* Exit if out of loop IDs. */
2448                 if (rval != QLA_SUCCESS) {
2449                         break;
2450                 }
2451
2452                 /*
2453                  * Login and add the new devices to our port list.
2454                  */
2455                 list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
2456                         if (atomic_read(&ha->loop_down_timer) ||
2457                             test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2458                                 break;
2459
2460                         /* Find a new loop ID to use. */
2461                         fcport->loop_id = next_loopid;
2462                         rval = qla2x00_find_new_loop_id(ha, fcport);
2463                         if (rval != QLA_SUCCESS) {
2464                                 /* Ran out of IDs to use */
2465                                 break;
2466                         }
2467
2468                         /* Login and update database */
2469                         qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
2470
2471                         if (ha->parent) {
2472                                 fcport->ha = ha;
2473                                 fcport->vp_idx = ha->vp_idx;
2474                                 list_add_tail(&fcport->vp_fcport,
2475                                     &ha->vp_fcports);
2476                                 list_move_tail(&fcport->list,
2477                                     &ha->parent->fcports);
2478                         } else
2479                                 list_move_tail(&fcport->list, &ha->fcports);
2480                 }
2481         } while (0);
2482
2483         /* Free all new device structures not processed. */
2484         list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
2485                 list_del(&fcport->list);
2486                 kfree(fcport);
2487         }
2488
2489         if (rval) {
2490                 DEBUG2(printk("scsi(%ld): Configure fabric error exit: "
2491                     "rval=%d\n", ha->host_no, rval));
2492         }
2493
2494         return (rval);
2495 }
2496
2497
2498 /*
2499  * qla2x00_find_all_fabric_devs
2500  *
2501  * Input:
2502  *      ha = adapter block pointer.
2503  *      dev = database device entry pointer.
2504  *
2505  * Returns:
2506  *      0 = success.
2507  *
2508  * Context:
2509  *      Kernel context.
2510  */
2511 static int
2512 qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
2513 {
2514         int             rval;
2515         uint16_t        loop_id;
2516         fc_port_t       *fcport, *new_fcport, *fcptemp;
2517         int             found;
2518
2519         sw_info_t       *swl;
2520         int             swl_idx;
2521         int             first_dev, last_dev;
2522         port_id_t       wrap, nxt_d_id;
2523         int             vp_index;
2524         int             empty_vp_index;
2525         int             found_vp;
2526         scsi_qla_host_t *vha;
2527         scsi_qla_host_t *pha = to_qla_parent(ha);
2528
2529         rval = QLA_SUCCESS;
2530
2531         /* Try GID_PT to get device list, else GAN. */
2532         swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_ATOMIC);
2533         if (!swl) {
2534                 /*EMPTY*/
2535                 DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback "
2536                     "on GA_NXT\n", ha->host_no));
2537         } else {
2538                 if (qla2x00_gid_pt(ha, swl) != QLA_SUCCESS) {
2539                         kfree(swl);
2540                         swl = NULL;
2541                 } else if (qla2x00_gpn_id(ha, swl) != QLA_SUCCESS) {
2542                         kfree(swl);
2543                         swl = NULL;
2544                 } else if (qla2x00_gnn_id(ha, swl) != QLA_SUCCESS) {
2545                         kfree(swl);
2546                         swl = NULL;
2547                 } else if (qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
2548                         qla2x00_gpsc(ha, swl);
2549                 }
2550         }
2551         swl_idx = 0;
2552
2553         /* Allocate temporary fcport for any new fcports discovered. */
2554         new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
2555         if (new_fcport == NULL) {
2556                 kfree(swl);
2557                 return (QLA_MEMORY_ALLOC_FAILED);
2558         }
2559         new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
2560         new_fcport->vp_idx = ha->vp_idx;
2561         /* Set start port ID scan at adapter ID. */
2562         first_dev = 1;
2563         last_dev = 0;
2564
2565         /* Starting free loop ID. */
2566         loop_id = pha->min_external_loopid;
2567         for (; loop_id <= ha->last_loop_id; loop_id++) {
2568                 if (qla2x00_is_reserved_id(ha, loop_id))
2569                         continue;
2570
2571                 if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
2572                         break;
2573
2574                 if (swl != NULL) {
2575                         if (last_dev) {
2576                                 wrap.b24 = new_fcport->d_id.b24;
2577                         } else {
2578                                 new_fcport->d_id.b24 = swl[swl_idx].d_id.b24;
2579                                 memcpy(new_fcport->node_name,
2580                                     swl[swl_idx].node_name, WWN_SIZE);
2581                                 memcpy(new_fcport->port_name,
2582                                     swl[swl_idx].port_name, WWN_SIZE);
2583                                 memcpy(new_fcport->fabric_port_name,
2584                                     swl[swl_idx].fabric_port_name, WWN_SIZE);
2585                                 new_fcport->fp_speed = swl[swl_idx].fp_speed;
2586
2587                                 if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
2588                                         last_dev = 1;
2589                                 }
2590                                 swl_idx++;
2591                         }
2592                 } else {
2593                         /* Send GA_NXT to the switch */
2594                         rval = qla2x00_ga_nxt(ha, new_fcport);
2595                         if (rval != QLA_SUCCESS) {
2596                                 qla_printk(KERN_WARNING, ha,
2597                                     "SNS scan failed -- assuming zero-entry "
2598                                     "result...\n");
2599                                 list_for_each_entry_safe(fcport, fcptemp,
2600                                     new_fcports, list) {
2601                                         list_del(&fcport->list);
2602                                         kfree(fcport);
2603                                 }
2604                                 rval = QLA_SUCCESS;
2605                                 break;
2606                         }
2607                 }
2608
2609                 /* If wrap on switch device list, exit. */
2610                 if (first_dev) {
2611                         wrap.b24 = new_fcport->d_id.b24;
2612                         first_dev = 0;
2613                 } else if (new_fcport->d_id.b24 == wrap.b24) {
2614                         DEBUG2(printk("scsi(%ld): device wrap (%02x%02x%02x)\n",
2615                             ha->host_no, new_fcport->d_id.b.domain,
2616                             new_fcport->d_id.b.area, new_fcport->d_id.b.al_pa));
2617                         break;
2618                 }
2619
2620                 /* Bypass if same physical adapter. */
2621                 if (new_fcport->d_id.b24 == pha->d_id.b24)
2622                         continue;
2623
2624                 /* Bypass virtual ports of the same host. */
2625                 if (pha->num_vhosts) {
2626                         for_each_mapped_vp_idx(pha, vp_index) {
2627                                 empty_vp_index = 1;
2628                                 found_vp = 0;
2629                                 list_for_each_entry(vha, &pha->vp_list,
2630                                     vp_list) {
2631                                         if (vp_index == vha->vp_idx) {
2632                                                 empty_vp_index = 0;
2633                                                 found_vp = 1;
2634                                                 break;
2635                                         }
2636                                 }
2637
2638                                 if (empty_vp_index)
2639                                         continue;
2640
2641                                 if (found_vp &&
2642                                     new_fcport->d_id.b24 == vha->d_id.b24)
2643                                         break;
2644                         }
2645
2646                         if (vp_index <= pha->max_npiv_vports)
2647                                 continue;
2648                 }
2649
2650                 /* Bypass if same domain and area of adapter. */
2651                 if (((new_fcport->d_id.b24 & 0xffff00) ==
2652                     (ha->d_id.b24 & 0xffff00)) && ha->current_topology ==
2653                         ISP_CFG_FL)
2654                             continue;
2655
2656                 /* Bypass reserved domain fields. */
2657                 if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
2658                         continue;
2659
2660                 /* Locate matching device in database. */
2661                 found = 0;
2662                 list_for_each_entry(fcport, &pha->fcports, list) {
2663                         if (new_fcport->vp_idx != fcport->vp_idx)
2664                                 continue;
2665                         if (memcmp(new_fcport->port_name, fcport->port_name,
2666                             WWN_SIZE))
2667                                 continue;
2668
2669                         found++;
2670
2671                         /* Update port state. */
2672                         memcpy(fcport->fabric_port_name,
2673                             new_fcport->fabric_port_name, WWN_SIZE);
2674                         fcport->fp_speed = new_fcport->fp_speed;
2675
2676                         /*
2677                          * If address the same and state FCS_ONLINE, nothing
2678                          * changed.
2679                          */
2680                         if (fcport->d_id.b24 == new_fcport->d_id.b24 &&
2681                             atomic_read(&fcport->state) == FCS_ONLINE) {
2682                                 break;
2683                         }
2684
2685                         /*
2686                          * If device was not a fabric device before.
2687                          */
2688                         if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) {
2689                                 fcport->d_id.b24 = new_fcport->d_id.b24;
2690                                 fcport->loop_id = FC_NO_LOOP_ID;
2691                                 fcport->flags |= (FCF_FABRIC_DEVICE |
2692                                     FCF_LOGIN_NEEDED);
2693                                 fcport->flags &= ~FCF_PERSISTENT_BOUND;
2694                                 break;
2695                         }
2696
2697                         /*
2698                          * Port ID changed or device was marked to be updated;
2699                          * Log it out if still logged in and mark it for
2700                          * relogin later.
2701                          */
2702                         fcport->d_id.b24 = new_fcport->d_id.b24;
2703                         fcport->flags |= FCF_LOGIN_NEEDED;
2704                         if (fcport->loop_id != FC_NO_LOOP_ID &&
2705                             (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
2706                             fcport->port_type != FCT_INITIATOR &&
2707                             fcport->port_type != FCT_BROADCAST) {
2708                                 ha->isp_ops->fabric_logout(ha, fcport->loop_id,
2709                                     fcport->d_id.b.domain, fcport->d_id.b.area,
2710                                     fcport->d_id.b.al_pa);
2711                                 fcport->loop_id = FC_NO_LOOP_ID;
2712                         }
2713
2714                         break;
2715                 }
2716
2717                 if (found)
2718                         continue;
2719
2720                 /* If device was not in our fcports list, then add it. */
2721                 list_add_tail(&new_fcport->list, new_fcports);
2722
2723                 /* Allocate a new replacement fcport. */
2724                 nxt_d_id.b24 = new_fcport->d_id.b24;
2725                 new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
2726                 if (new_fcport == NULL) {
2727                         kfree(swl);
2728                         return (QLA_MEMORY_ALLOC_FAILED);
2729                 }
2730                 new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
2731                 new_fcport->d_id.b24 = nxt_d_id.b24;
2732                 new_fcport->vp_idx = ha->vp_idx;
2733         }
2734
2735         kfree(swl);
2736         kfree(new_fcport);
2737
2738         if (!list_empty(new_fcports))
2739                 ha->device_flags |= DFLG_FABRIC_DEVICES;
2740
2741         return (rval);
2742 }
2743
2744 /*
2745  * qla2x00_find_new_loop_id
2746  *      Scan through our port list and find a new usable loop ID.
2747  *
2748  * Input:
2749  *      ha:     adapter state pointer.
2750  *      dev:    port structure pointer.
2751  *
2752  * Returns:
2753  *      qla2x00 local function return status code.
2754  *
2755  * Context:
2756  *      Kernel context.
2757  */
2758 static int
2759 qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev)
2760 {
2761         int     rval;
2762         int     found;
2763         fc_port_t *fcport;
2764         uint16_t first_loop_id;
2765         scsi_qla_host_t *pha = to_qla_parent(ha);
2766
2767         rval = QLA_SUCCESS;
2768
2769         /* Save starting loop ID. */
2770         first_loop_id = dev->loop_id;
2771
2772         for (;;) {
2773                 /* Skip loop ID if already used by adapter. */
2774                 if (dev->loop_id == ha->loop_id) {
2775                         dev->loop_id++;
2776                 }
2777
2778                 /* Skip reserved loop IDs. */
2779                 while (qla2x00_is_reserved_id(ha, dev->loop_id)) {
2780                         dev->loop_id++;
2781                 }
2782
2783                 /* Reset loop ID if passed the end. */
2784                 if (dev->loop_id > ha->last_loop_id) {
2785                         /* first loop ID. */
2786                         dev->loop_id = ha->min_external_loopid;
2787                 }
2788
2789                 /* Check for loop ID being already in use. */
2790                 found = 0;
2791                 fcport = NULL;
2792                 list_for_each_entry(fcport, &pha->fcports, list) {
2793                         if (fcport->loop_id == dev->loop_id && fcport != dev) {
2794                                 /* ID possibly in use */
2795                                 found++;
2796                                 break;
2797                         }
2798                 }
2799
2800                 /* If not in use then it is free to use. */
2801                 if (!found) {
2802                         break;
2803                 }
2804
2805                 /* ID in use. Try next value. */
2806                 dev->loop_id++;
2807
2808                 /* If wrap around. No free ID to use. */
2809                 if (dev->loop_id == first_loop_id) {
2810                         dev->loop_id = FC_NO_LOOP_ID;
2811                         rval = QLA_FUNCTION_FAILED;
2812                         break;
2813                 }
2814         }
2815
2816         return (rval);
2817 }
2818
2819 /*
2820  * qla2x00_device_resync
2821  *      Marks devices in the database that needs resynchronization.
2822  *
2823  * Input:
2824  *      ha = adapter block pointer.
2825  *
2826  * Context:
2827  *      Kernel context.
2828  */
2829 static int
2830 qla2x00_device_resync(scsi_qla_host_t *ha)
2831 {
2832         int     rval;
2833         uint32_t mask;
2834         fc_port_t *fcport;
2835         uint32_t rscn_entry;
2836         uint8_t rscn_out_iter;
2837         uint8_t format;
2838         port_id_t d_id;
2839         scsi_qla_host_t *pha = to_qla_parent(ha);
2840
2841         rval = QLA_RSCNS_HANDLED;
2842
2843         while (ha->rscn_out_ptr != ha->rscn_in_ptr ||
2844             ha->flags.rscn_queue_overflow) {
2845
2846                 rscn_entry = ha->rscn_queue[ha->rscn_out_ptr];
2847                 format = MSB(MSW(rscn_entry));
2848                 d_id.b.domain = LSB(MSW(rscn_entry));
2849                 d_id.b.area = MSB(LSW(rscn_entry));
2850                 d_id.b.al_pa = LSB(LSW(rscn_entry));
2851
2852                 DEBUG(printk("scsi(%ld): RSCN queue entry[%d] = "
2853                     "[%02x/%02x%02x%02x].\n",
2854                     ha->host_no, ha->rscn_out_ptr, format, d_id.b.domain,
2855                     d_id.b.area, d_id.b.al_pa));
2856
2857                 ha->rscn_out_ptr++;
2858                 if (ha->rscn_out_ptr == MAX_RSCN_COUNT)
2859                         ha->rscn_out_ptr = 0;
2860
2861                 /* Skip duplicate entries. */
2862                 for (rscn_out_iter = ha->rscn_out_ptr;
2863                     !ha->flags.rscn_queue_overflow &&
2864                     rscn_out_iter != ha->rscn_in_ptr;
2865                     rscn_out_iter = (rscn_out_iter ==
2866                         (MAX_RSCN_COUNT - 1)) ? 0: rscn_out_iter + 1) {
2867
2868                         if (rscn_entry != ha->rscn_queue[rscn_out_iter])
2869                                 break;
2870
2871                         DEBUG(printk("scsi(%ld): Skipping duplicate RSCN queue "
2872                             "entry found at [%d].\n", ha->host_no,
2873                             rscn_out_iter));
2874
2875                         ha->rscn_out_ptr = rscn_out_iter;
2876                 }
2877
2878                 /* Queue overflow, set switch default case. */
2879                 if (ha->flags.rscn_queue_overflow) {
2880                         DEBUG(printk("scsi(%ld): device_resync: rscn "
2881                             "overflow.\n", ha->host_no));
2882
2883                         format = 3;
2884                         ha->flags.rscn_queue_overflow = 0;
2885                 }
2886
2887                 switch (format) {
2888                 case 0:
2889                         mask = 0xffffff;
2890                         break;
2891                 case 1:
2892                         mask = 0xffff00;
2893                         break;
2894                 case 2:
2895                         mask = 0xff0000;
2896                         break;
2897                 default:
2898                         mask = 0x0;
2899                         d_id.b24 = 0;
2900                         ha->rscn_out_ptr = ha->rscn_in_ptr;
2901                         break;
2902                 }
2903
2904                 rval = QLA_SUCCESS;
2905
2906                 list_for_each_entry(fcport, &pha->fcports, list) {
2907                         if (fcport->vp_idx != ha->vp_idx)
2908                                 continue;
2909
2910                         if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
2911                             (fcport->d_id.b24 & mask) != d_id.b24 ||
2912                             fcport->port_type == FCT_BROADCAST)
2913                                 continue;
2914
2915                         if (atomic_read(&fcport->state) == FCS_ONLINE) {
2916                                 if (format != 3 ||
2917                                     fcport->port_type != FCT_INITIATOR) {
2918                                         qla2x00_mark_device_lost(ha, fcport,
2919                                             0, 0);
2920                                 }
2921                         }
2922                         fcport->flags &= ~FCF_FARP_DONE;
2923                 }
2924         }
2925         return (rval);
2926 }
2927
2928 /*
2929  * qla2x00_fabric_dev_login
2930  *      Login fabric target device and update FC port database.
2931  *
2932  * Input:
2933  *      ha:             adapter state pointer.
2934  *      fcport:         port structure list pointer.
2935  *      next_loopid:    contains value of a new loop ID that can be used
2936  *                      by the next login attempt.
2937  *
2938  * Returns:
2939  *      qla2x00 local function return status code.
2940  *
2941  * Context:
2942  *      Kernel context.
2943  */
2944 static int
2945 qla2x00_fabric_dev_login(scsi_qla_host_t *ha, fc_port_t *fcport,
2946     uint16_t *next_loopid)
2947 {
2948         int     rval;
2949         int     retry;
2950         uint8_t opts;
2951
2952         rval = QLA_SUCCESS;
2953         retry = 0;
2954
2955         rval = qla2x00_fabric_login(ha, fcport, next_loopid);
2956         if (rval == QLA_SUCCESS) {
2957                 /* Send an ADISC to tape devices.*/
2958                 opts = 0;
2959                 if (fcport->flags & FCF_TAPE_PRESENT)
2960                         opts |= BIT_1;
2961                 rval = qla2x00_get_port_database(ha, fcport, opts);
2962                 if (rval != QLA_SUCCESS) {
2963                         ha->isp_ops->fabric_logout(ha, fcport->loop_id,
2964                             fcport->d_id.b.domain, fcport->d_id.b.area,
2965                             fcport->d_id.b.al_pa);
2966                         qla2x00_mark_device_lost(ha, fcport, 1, 0);
2967                 } else {
2968                         qla2x00_update_fcport(ha, fcport);
2969                 }
2970         }
2971
2972         return (rval);
2973 }
2974
2975 /*
2976  * qla2x00_fabric_login
2977  *      Issue fabric login command.
2978  *
2979  * Input:
2980  *      ha = adapter block pointer.
2981  *      device = pointer to FC device type structure.
2982  *
2983  * Returns:
2984  *      0 - Login successfully
2985  *      1 - Login failed
2986  *      2 - Initiator device
2987  *      3 - Fatal error
2988  */
2989 int
2990 qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport,
2991     uint16_t *next_loopid)
2992 {
2993         int     rval;
2994         int     retry;
2995         uint16_t tmp_loopid;
2996         uint16_t mb[MAILBOX_REGISTER_COUNT];
2997
2998         retry = 0;
2999         tmp_loopid = 0;
3000
3001         for (;;) {
3002                 DEBUG(printk("scsi(%ld): Trying Fabric Login w/loop id 0x%04x "
3003                     "for port %02x%02x%02x.\n",
3004                     ha->host_no, fcport->loop_id, fcport->d_id.b.domain,
3005                     fcport->d_id.b.area, fcport->d_id.b.al_pa));
3006
3007                 /* Login fcport on switch. */
3008                 ha->isp_ops->fabric_login(ha, fcport->loop_id,
3009                     fcport->d_id.b.domain, fcport->d_id.b.area,
3010                     fcport->d_id.b.al_pa, mb, BIT_0);
3011                 if (mb[0] == MBS_PORT_ID_USED) {
3012                         /*
3013                          * Device has another loop ID.  The firmware team
3014                          * recommends the driver perform an implicit login with
3015                          * the specified ID again. The ID we just used is save
3016                          * here so we return with an ID that can be tried by
3017                          * the next login.
3018                          */
3019                         retry++;
3020                         tmp_loopid = fcport->loop_id;
3021                         fcport->loop_id = mb[1];
3022
3023                         DEBUG(printk("Fabric Login: port in use - next "
3024                             "loop id=0x%04x, port Id=%02x%02x%02x.\n",
3025                             fcport->loop_id, fcport->d_id.b.domain,
3026                             fcport->d_id.b.area, fcport->d_id.b.al_pa));
3027
3028                 } else if (mb[0] == MBS_COMMAND_COMPLETE) {
3029                         /*
3030                          * Login succeeded.
3031                          */
3032                         if (retry) {
3033                                 /* A retry occurred before. */
3034                                 *next_loopid = tmp_loopid;
3035                         } else {
3036                                 /*
3037                                  * No retry occurred before. Just increment the
3038                                  * ID value for next login.
3039                                  */
3040                                 *next_loopid = (fcport->loop_id + 1);
3041                         }
3042
3043                         if (mb[1] & BIT_0) {
3044                                 fcport->port_type = FCT_INITIATOR;
3045                         } else {
3046                                 fcport->port_type = FCT_TARGET;
3047                                 if (mb[1] & BIT_1) {
3048                                         fcport->flags |= FCF_TAPE_PRESENT;
3049                                 }
3050                         }
3051
3052                         if (mb[10] & BIT_0)
3053                                 fcport->supported_classes |= FC_COS_CLASS2;
3054                         if (mb[10] & BIT_1)
3055                                 fcport->supported_classes |= FC_COS_CLASS3;
3056
3057                         rval = QLA_SUCCESS;
3058                         break;
3059                 } else if (mb[0] == MBS_LOOP_ID_USED) {
3060                         /*
3061                          * Loop ID already used, try next loop ID.
3062                          */
3063                         fcport->loop_id++;
3064                         rval = qla2x00_find_new_loop_id(ha, fcport);
3065                         if (rval != QLA_SUCCESS) {
3066                                 /* Ran out of loop IDs to use */
3067                                 break;
3068                         }
3069                 } else if (mb[0] == MBS_COMMAND_ERROR) {
3070                         /*
3071                          * Firmware possibly timed out during login. If NO
3072                          * retries are left to do then the device is declared
3073                          * dead.
3074                          */
3075                         *next_loopid = fcport->loop_id;
3076                         ha->isp_ops->fabric_logout(ha, fcport->loop_id,
3077                             fcport->d_id.b.domain, fcport->d_id.b.area,
3078                             fcport->d_id.b.al_pa);
3079                         qla2x00_mark_device_lost(ha, fcport, 1, 0);
3080
3081                         rval = 1;
3082                         break;
3083                 } else {
3084                         /*
3085                          * unrecoverable / not handled error
3086                          */
3087                         DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x "
3088                             "loop_id=%x jiffies=%lx.\n",
3089                             __func__, ha->host_no, mb[0],
3090                             fcport->d_id.b.domain, fcport->d_id.b.area,
3091                             fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
3092
3093                         *next_loopid = fcport->loop_id;
3094                         ha->isp_ops->fabric_logout(ha, fcport->loop_id,
3095                             fcport->d_id.b.domain, fcport->d_id.b.area,
3096                             fcport->d_id.b.al_pa);
3097                         fcport->loop_id = FC_NO_LOOP_ID;
3098                         fcport->login_retry = 0;
3099
3100                         rval = 3;
3101                         break;
3102                 }
3103         }
3104
3105         return (rval);
3106 }
3107
3108 /*
3109  * qla2x00_local_device_login
3110  *      Issue local device login command.
3111  *
3112  * Input:
3113  *      ha = adapter block pointer.
3114  *      loop_id = loop id of device to login to.
3115  *
3116  * Returns (Where's the #define!!!!):
3117  *      0 - Login successfully
3118  *      1 - Login failed
3119  *      3 - Fatal error
3120  */
3121 int
3122 qla2x00_local_device_login(scsi_qla_host_t *ha, fc_port_t *fcport)
3123 {
3124         int             rval;
3125         uint16_t        mb[MAILBOX_REGISTER_COUNT];
3126
3127         memset(mb, 0, sizeof(mb));
3128         rval = qla2x00_login_local_device(ha, fcport, mb, BIT_0);
3129         if (rval == QLA_SUCCESS) {
3130                 /* Interrogate mailbox registers for any errors */
3131                 if (mb[0] == MBS_COMMAND_ERROR)
3132                         rval = 1;
3133                 else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR)
3134                         /* device not in PCB table */
3135                         rval = 3;
3136         }
3137
3138         return (rval);
3139 }
3140
3141 /*
3142  *  qla2x00_loop_resync
3143  *      Resync with fibre channel devices.
3144  *
3145  * Input:
3146  *      ha = adapter block pointer.
3147  *
3148  * Returns:
3149  *      0 = success
3150  */
3151 int
3152 qla2x00_loop_resync(scsi_qla_host_t *ha)
3153 {
3154         int   rval;
3155         uint32_t wait_time;
3156
3157         rval = QLA_SUCCESS;
3158
3159         atomic_set(&ha->loop_state, LOOP_UPDATE);
3160         clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
3161         if (ha->flags.online) {
3162                 if (!(rval = qla2x00_fw_ready(ha))) {
3163                         /* Wait at most MAX_TARGET RSCNs for a stable link. */
3164                         wait_time = 256;
3165                         do {
3166                                 atomic_set(&ha->loop_state, LOOP_UPDATE);
3167
3168                                 /* Issue a marker after FW becomes ready. */
3169                                 qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
3170                                 ha->marker_needed = 0;
3171
3172                                 /* Remap devices on Loop. */
3173                                 clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
3174
3175                                 qla2x00_configure_loop(ha);
3176                                 wait_time--;
3177                         } while (!atomic_read(&ha->loop_down_timer) &&
3178                                 !(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) &&
3179                                 wait_time &&
3180                                 (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
3181                 }
3182         }
3183
3184         if (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
3185                 return (QLA_FUNCTION_FAILED);
3186         }
3187
3188         if (rval) {
3189                 DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
3190         }
3191
3192         return (rval);
3193 }
3194
3195 void
3196 qla2x00_rescan_fcports(scsi_qla_host_t *ha)
3197 {
3198         int rescan_done;
3199         fc_port_t *fcport;
3200
3201         rescan_done = 0;
3202         list_for_each_entry(fcport, &ha->fcports, list) {
3203                 if ((fcport->flags & FCF_RESCAN_NEEDED) == 0)
3204                         continue;
3205
3206                 qla2x00_update_fcport(ha, fcport);
3207                 fcport->flags &= ~FCF_RESCAN_NEEDED;
3208
3209                 rescan_done = 1;
3210         }
3211         qla2x00_probe_for_all_luns(ha);
3212 }
3213
3214 void
3215 qla2x00_update_fcports(scsi_qla_host_t *ha)
3216 {
3217         fc_port_t *fcport;
3218
3219         /* Go with deferred removal of rport references. */
3220         list_for_each_entry(fcport, &ha->fcports, list)
3221                 if (fcport->drport)
3222                         qla2x00_rport_del(fcport);
3223 }
3224
3225 /*
3226 *  qla2x00_abort_isp
3227 *      Resets ISP and aborts all outstanding commands.
3228 *
3229 * Input:
3230 *      ha           = adapter block pointer.
3231 *
3232 * Returns:
3233 *      0 = success
3234 */
3235 int
3236 qla2x00_abort_isp(scsi_qla_host_t *ha)
3237 {
3238         int rval;
3239         uint8_t        status = 0;
3240
3241         if (ha->flags.online) {
3242                 ha->flags.online = 0;
3243                 clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
3244
3245                 qla_printk(KERN_INFO, ha,
3246                     "Performing ISP error recovery - ha= %p.\n", ha);
3247                 ha->isp_ops->reset_chip(ha);
3248
3249                 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
3250                 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
3251                         atomic_set(&ha->loop_state, LOOP_DOWN);
3252                         qla2x00_mark_all_devices_lost(ha, 0);
3253                 } else {
3254                         if (!atomic_read(&ha->loop_down_timer))
3255                                 atomic_set(&ha->loop_down_timer,
3256                                     LOOP_DOWN_TIME);
3257                 }
3258
3259                 /* Requeue all commands in outstanding command list. */
3260                 qla2x00_abort_all_cmds(ha, DID_RESET << 16);
3261
3262                 ha->isp_ops->get_flash_version(ha, ha->request_ring);
3263
3264                 ha->isp_ops->nvram_config(ha);
3265
3266                 if (!qla2x00_restart_isp(ha)) {
3267                         clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
3268
3269                         if (!atomic_read(&ha->loop_down_timer)) {
3270                                 /*
3271                                  * Issue marker command only when we are going
3272                                  * to start the I/O .
3273                                  */
3274                                 ha->marker_needed = 1;
3275                         }
3276
3277                         ha->flags.online = 1;
3278
3279                         ha->isp_ops->enable_intrs(ha);
3280
3281                         ha->isp_abort_cnt = 0;
3282                         clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
3283
3284                         if (ha->eft) {
3285                                 memset(ha->eft, 0, EFT_SIZE);
3286                                 rval = qla2x00_enable_eft_trace(ha,
3287                                     ha->eft_dma, EFT_NUM_BUFFERS);
3288                                 if (rval) {
3289                                         qla_printk(KERN_WARNING, ha,
3290                                             "Unable to reinitialize EFT "
3291                                             "(%d).\n", rval);
3292                                 }
3293                         }
3294
3295                         if (ha->fce) {
3296                                 ha->flags.fce_enabled = 1;
3297                                 memset(ha->fce, 0,
3298                                     fce_calc_size(ha->fce_bufs));
3299                                 rval = qla2x00_enable_fce_trace(ha,
3300                                     ha->fce_dma, ha->fce_bufs, ha->fce_mb,
3301                                     &ha->fce_bufs);
3302                                 if (rval) {
3303                                         qla_printk(KERN_WARNING, ha,
3304                                             "Unable to reinitialize FCE "
3305                                             "(%d).\n", rval);
3306                                         ha->flags.fce_enabled = 0;
3307                                 }
3308                         }
3309                 } else {        /* failed the ISP abort */
3310                         ha->flags.online = 1;
3311                         if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
3312                                 if (ha->isp_abort_cnt == 0) {
3313                                         qla_printk(KERN_WARNING, ha,
3314                                             "ISP error recovery failed - "
3315                                             "board disabled\n");
3316                                         /*
3317                                          * The next call disables the board
3318                                          * completely.
3319                                          */
3320                                         ha->isp_ops->reset_adapter(ha);
3321                                         ha->flags.online = 0;
3322                                         clear_bit(ISP_ABORT_RETRY,
3323                                             &ha->dpc_flags);
3324                                         status = 0;
3325                                 } else { /* schedule another ISP abort */
3326                                         ha->isp_abort_cnt--;
3327                                         DEBUG(printk("qla%ld: ISP abort - "
3328                                             "retry remaining %d\n",
3329                                             ha->host_no, ha->isp_abort_cnt));
3330                                         status = 1;
3331                                 }
3332                         } else {
3333                                 ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
3334                                 DEBUG(printk("qla2x00(%ld): ISP error recovery "
3335                                     "- retrying (%d) more times\n",
3336                                     ha->host_no, ha->isp_abort_cnt));
3337                                 set_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
3338                                 status = 1;
3339                         }
3340                 }
3341
3342         }
3343
3344         if (status) {
3345                 qla_printk(KERN_INFO, ha,
3346                         "qla2x00_abort_isp: **** FAILED ****\n");
3347         } else {
3348                 DEBUG(printk(KERN_INFO
3349                                 "qla2x00_abort_isp(%ld): exiting.\n",
3350                                 ha->host_no));
3351         }
3352
3353         return(status);
3354 }
3355
3356 /*
3357 *  qla2x00_restart_isp
3358 *      restarts the ISP after a reset
3359 *
3360 * Input:
3361 *      ha = adapter block pointer.
3362 *
3363 * Returns:
3364 *      0 = success
3365 */
3366 static int
3367 qla2x00_restart_isp(scsi_qla_host_t *ha)
3368 {
3369         uint8_t         status = 0;
3370         uint32_t wait_time;
3371
3372         /* If firmware needs to be loaded */
3373         if (qla2x00_isp_firmware(ha)) {
3374                 ha->flags.online = 0;
3375                 if (!(status = ha->isp_ops->chip_diag(ha)))
3376                         status = qla2x00_setup_chip(ha);
3377         }
3378
3379         if (!status && !(status = qla2x00_init_rings(ha))) {
3380                 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
3381                 if (!(status = qla2x00_fw_ready(ha))) {
3382                         DEBUG(printk("%s(): Start configure loop, "
3383                             "status = %d\n", __func__, status));
3384
3385                         /* Issue a marker after FW becomes ready. */
3386                         qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
3387
3388                         ha->flags.online = 1;
3389                         /* Wait at most MAX_TARGET RSCNs for a stable link. */
3390                         wait_time = 256;
3391                         do {
3392                                 clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
3393                                 qla2x00_configure_loop(ha);
3394                                 wait_time--;
3395                         } while (!atomic_read(&ha->loop_down_timer) &&
3396                                 !(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) &&
3397                                 wait_time &&
3398                                 (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
3399                 }
3400
3401                 /* if no cable then assume it's good */
3402                 if ((ha->device_flags & DFLG_NO_CABLE))
3403                         status = 0;
3404
3405                 DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
3406                                 __func__,
3407                                 status));
3408         }
3409         return (status);
3410 }
3411
3412 /*
3413 * qla2x00_reset_adapter
3414 *      Reset adapter.
3415 *
3416 * Input:
3417 *      ha = adapter block pointer.
3418 */
3419 void
3420 qla2x00_reset_adapter(scsi_qla_host_t *ha)
3421 {
3422         unsigned long flags = 0;
3423         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
3424
3425         ha->flags.online = 0;
3426         ha->isp_ops->disable_intrs(ha);
3427
3428         spin_lock_irqsave(&ha->hardware_lock, flags);
3429         WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
3430         RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */
3431         WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
3432         RD_REG_WORD(&reg->hccr);                        /* PCI Posting. */
3433         spin_unlock_irqrestore(&ha->hardware_lock, flags);
3434 }
3435
3436 void
3437 qla24xx_reset_adapter(scsi_qla_host_t *ha)
3438 {
3439         unsigned long flags = 0;
3440         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
3441
3442         ha->flags.online = 0;
3443         ha->isp_ops->disable_intrs(ha);
3444
3445         spin_lock_irqsave(&ha->hardware_lock, flags);
3446         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
3447         RD_REG_DWORD(&reg->hccr);
3448         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
3449         RD_REG_DWORD(&reg->hccr);
3450         spin_unlock_irqrestore(&ha->hardware_lock, flags);
3451 }
3452
3453 /* On sparc systems, obtain port and node WWN from firmware
3454  * properties.
3455  */
3456 static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
3457 {
3458 #ifdef CONFIG_SPARC
3459         struct pci_dev *pdev = ha->pdev;
3460         struct device_node *dp = pci_device_to_OF_node(pdev);
3461         const u8 *val;
3462         int len;
3463
3464         val = of_get_property(dp, "port-wwn", &len);
3465         if (val && len >= WWN_SIZE)
3466                 memcpy(nv->port_name, val, WWN_SIZE);
3467
3468         val = of_get_property(dp, "node-wwn", &len);
3469         if (val && len >= WWN_SIZE)
3470                 memcpy(nv->node_name, val, WWN_SIZE);
3471 #endif
3472 }
3473
3474 int
3475 qla24xx_nvram_config(scsi_qla_host_t *ha)
3476 {
3477         int   rval;
3478         struct init_cb_24xx *icb;
3479         struct nvram_24xx *nv;
3480         uint32_t *dptr;
3481         uint8_t  *dptr1, *dptr2;
3482         uint32_t chksum;
3483         uint16_t cnt;
3484
3485         rval = QLA_SUCCESS;
3486         icb = (struct init_cb_24xx *)ha->init_cb;
3487         nv = ha->nvram;
3488
3489         /* Determine NVRAM starting address. */
3490         ha->nvram_size = sizeof(struct nvram_24xx);
3491         ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
3492         ha->vpd_size = FA_NVRAM_VPD_SIZE;
3493         ha->vpd_base = FA_NVRAM_VPD0_ADDR;
3494         if (PCI_FUNC(ha->pdev->devfn)) {
3495                 ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
3496                 ha->vpd_base = FA_NVRAM_VPD1_ADDR;
3497         }
3498
3499         /* Get VPD data into cache */
3500         ha->vpd = ha->nvram + VPD_OFFSET;
3501         ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd,
3502             ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
3503
3504         /* Get NVRAM data into cache and calculate checksum. */
3505         dptr = (uint32_t *)nv;
3506         ha->isp_ops->read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
3507             ha->nvram_size);
3508         for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
3509                 chksum += le32_to_cpu(*dptr++);
3510
3511         DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
3512         DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
3513
3514         /* Bad NVRAM data, set defaults parameters. */
3515         if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
3516             || nv->id[3] != ' ' ||
3517             nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
3518                 /* Reset NVRAM data. */
3519                 qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
3520                     "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
3521                     le16_to_cpu(nv->nvram_version));
3522                 qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
3523                     "invalid -- WWPN) defaults.\n");
3524
3525                 /*
3526                  * Set default initialization control block.
3527                  */
3528                 memset(nv, 0, ha->nvram_size);
3529                 nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
3530                 nv->version = __constant_cpu_to_le16(ICB_VERSION);
3531                 nv->frame_payload_size = __constant_cpu_to_le16(2048);
3532                 nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
3533                 nv->exchange_count = __constant_cpu_to_le16(0);
3534                 nv->hard_address = __constant_cpu_to_le16(124);
3535                 nv->port_name[0] = 0x21;
3536                 nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
3537                 nv->port_name[2] = 0x00;
3538                 nv->port_name[3] = 0xe0;
3539                 nv->port_name[4] = 0x8b;
3540                 nv->port_name[5] = 0x1c;
3541                 nv->port_name[6] = 0x55;
3542                 nv->port_name[7] = 0x86;
3543                 nv->node_name[0] = 0x20;
3544                 nv->node_name[1] = 0x00;
3545                 nv->node_name[2] = 0x00;
3546                 nv->node_name[3] = 0xe0;
3547                 nv->node_name[4] = 0x8b;
3548                 nv->node_name[5] = 0x1c;
3549                 nv->node_name[6] = 0x55;
3550                 nv->node_name[7] = 0x86;
3551                 qla24xx_nvram_wwn_from_ofw(ha, nv);
3552                 nv->login_retry_count = __constant_cpu_to_le16(8);
3553                 nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
3554                 nv->login_timeout = __constant_cpu_to_le16(0);
3555                 nv->firmware_options_1 =
3556                     __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
3557                 nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
3558                 nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
3559                 nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
3560                 nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
3561                 nv->efi_parameters = __constant_cpu_to_le32(0);
3562                 nv->reset_delay = 5;
3563                 nv->max_luns_per_target = __constant_cpu_to_le16(128);
3564                 nv->port_down_retry_count = __constant_cpu_to_le16(30);
3565                 nv->link_down_timeout = __constant_cpu_to_le16(30);
3566
3567                 rval = 1;
3568         }
3569
3570         /* Reset Initialization control block */
3571         memset(icb, 0, sizeof(struct init_cb_24xx));
3572
3573         /* Copy 1st segment. */
3574         dptr1 = (uint8_t *)icb;
3575         dptr2 = (uint8_t *)&nv->version;
3576         cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
3577         while (cnt--)
3578                 *dptr1++ = *dptr2++;
3579
3580         icb->login_retry_count = nv->login_retry_count;
3581         icb->link_down_on_nos = nv->link_down_on_nos;
3582
3583         /* Copy 2nd segment. */
3584         dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
3585         dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
3586         cnt = (uint8_t *)&icb->reserved_3 -
3587             (uint8_t *)&icb->interrupt_delay_timer;
3588         while (cnt--)
3589                 *dptr1++ = *dptr2++;
3590
3591         /*
3592          * Setup driver NVRAM options.
3593          */
3594         qla2x00_set_model_info(ha, nv->model_name, sizeof(nv->model_name),
3595             "QLA2462");
3596
3597         /* Use alternate WWN? */
3598         if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
3599                 memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
3600                 memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
3601         }
3602
3603         /* Prepare nodename */
3604         if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
3605                 /*
3606                  * Firmware will apply the following mask if the nodename was
3607                  * not provided.
3608                  */
3609                 memcpy(icb->node_name, icb->port_name, WWN_SIZE);
3610                 icb->node_name[0] &= 0xF0;
3611         }
3612
3613         /* Set host adapter parameters. */
3614         ha->flags.disable_risc_code_load = 0;
3615         ha->flags.enable_lip_reset = 0;
3616         ha->flags.enable_lip_full_login =
3617             le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
3618         ha->flags.enable_target_reset =
3619             le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
3620         ha->flags.enable_led_scheme = 0;
3621         ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
3622
3623         ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
3624             (BIT_6 | BIT_5 | BIT_4)) >> 4;
3625
3626         memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
3627             sizeof(ha->fw_seriallink_options24));
3628
3629         /* save HBA serial number */
3630         ha->serial0 = icb->port_name[5];
3631         ha->serial1 = icb->port_name[6];
3632         ha->serial2 = icb->port_name[7];
3633         ha->node_name = icb->node_name;
3634         ha->port_name = icb->port_name;
3635
3636         icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
3637
3638         ha->retry_count = le16_to_cpu(nv->login_retry_count);
3639
3640         /* Set minimum login_timeout to 4 seconds. */
3641         if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
3642                 nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
3643         if (le16_to_cpu(nv->login_timeout) < 4)
3644                 nv->login_timeout = __constant_cpu_to_le16(4);
3645         ha->login_timeout = le16_to_cpu(nv->login_timeout);
3646         icb->login_timeout = cpu_to_le16(nv->login_timeout);
3647
3648         /* Set minimum RATOV to 200 tenths of a second. */
3649         ha->r_a_tov = 200;
3650
3651         ha->loop_reset_delay = nv->reset_delay;
3652
3653         /* Link Down Timeout = 0:
3654          *
3655          *      When Port Down timer expires we will start returning
3656          *      I/O's to OS with "DID_NO_CONNECT".
3657          *
3658          * Link Down Timeout != 0:
3659          *
3660          *       The driver waits for the link to come up after link down
3661          *       before returning I/Os to OS with "DID_NO_CONNECT".
3662          */
3663         if (le16_to_cpu(nv->link_down_timeout) == 0) {
3664                 ha->loop_down_abort_time =
3665                     (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
3666         } else {
3667                 ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
3668                 ha->loop_down_abort_time =
3669                     (LOOP_DOWN_TIME - ha->link_down_timeout);
3670         }
3671
3672         /* Need enough time to try and get the port back. */
3673         ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
3674         if (qlport_down_retry)
3675                 ha->port_down_retry_count = qlport_down_retry;
3676
3677         /* Set login_retry_count */
3678         ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
3679         if (ha->port_down_retry_count ==
3680             le16_to_cpu(nv->port_down_retry_count) &&
3681             ha->port_down_retry_count > 3)
3682                 ha->login_retry_count = ha->port_down_retry_count;
3683         else if (ha->port_down_retry_count > (int)ha->login_retry_count)
3684                 ha->login_retry_count = ha->port_down_retry_count;
3685         if (ql2xloginretrycount)
3686                 ha->login_retry_count = ql2xloginretrycount;
3687
3688         /* Enable ZIO. */
3689         if (!ha->flags.init_done) {
3690                 ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
3691                     (BIT_3 | BIT_2 | BIT_1 | BIT_0);
3692                 ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
3693                     le16_to_cpu(icb->interrupt_delay_timer): 2;
3694         }
3695         icb->firmware_options_2 &= __constant_cpu_to_le32(
3696             ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
3697         ha->flags.process_response_queue = 0;
3698         if (ha->zio_mode != QLA_ZIO_DISABLED) {
3699                 ha->zio_mode = QLA_ZIO_MODE_6;
3700
3701                 DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
3702                     "(%d us).\n", ha->host_no, ha->zio_mode,
3703                     ha->zio_timer * 100));
3704                 qla_printk(KERN_INFO, ha,
3705                     "ZIO mode %d enabled; timer delay (%d us).\n",
3706                     ha->zio_mode, ha->zio_timer * 100);
3707
3708                 icb->firmware_options_2 |= cpu_to_le32(
3709                     (uint32_t)ha->zio_mode);
3710                 icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
3711                 ha->flags.process_response_queue = 1;
3712         }
3713
3714         if (rval) {
3715                 DEBUG2_3(printk(KERN_WARNING
3716                     "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
3717         }
3718         return (rval);
3719 }
3720
3721 static int
3722 qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
3723 {
3724         int     rval;
3725         int     segments, fragment;
3726         uint32_t faddr;
3727         uint32_t *dcode, dlen;
3728         uint32_t risc_addr;
3729         uint32_t risc_size;
3730         uint32_t i;
3731
3732         rval = QLA_SUCCESS;
3733
3734         segments = FA_RISC_CODE_SEGMENTS;
3735         faddr = FA_RISC_CODE_ADDR;
3736         dcode = (uint32_t *)ha->request_ring;
3737         *srisc_addr = 0;
3738
3739         /* Validate firmware image by checking version. */
3740         qla24xx_read_flash_data(ha, dcode, faddr + 4, 4);
3741         for (i = 0; i < 4; i++)
3742                 dcode[i] = be32_to_cpu(dcode[i]);
3743         if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
3744             dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
3745             (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
3746                 dcode[3] == 0)) {
3747                 qla_printk(KERN_WARNING, ha,
3748                     "Unable to verify integrity of flash firmware image!\n");
3749                 qla_printk(KERN_WARNING, ha,
3750                     "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
3751                     dcode[1], dcode[2], dcode[3]);
3752
3753                 return QLA_FUNCTION_FAILED;
3754         }
3755
3756         while (segments && rval == QLA_SUCCESS) {
3757                 /* Read segment's load information. */
3758                 qla24xx_read_flash_data(ha, dcode, faddr, 4);
3759
3760                 risc_addr = be32_to_cpu(dcode[2]);
3761                 *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
3762                 risc_size = be32_to_cpu(dcode[3]);
3763
3764                 fragment = 0;
3765                 while (risc_size > 0 && rval == QLA_SUCCESS) {
3766                         dlen = (uint32_t)(ha->fw_transfer_size >> 2);
3767                         if (dlen > risc_size)
3768                                 dlen = risc_size;
3769
3770                         DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
3771                             "addr %x, number of dwords 0x%x, offset 0x%x.\n",
3772                             ha->host_no, risc_addr, dlen, faddr));
3773
3774                         qla24xx_read_flash_data(ha, dcode, faddr, dlen);
3775                         for (i = 0; i < dlen; i++)
3776                                 dcode[i] = swab32(dcode[i]);
3777
3778                         rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
3779                             dlen);
3780                         if (rval) {
3781                                 DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
3782                                     "segment %d of firmware\n", ha->host_no,
3783                                     fragment));
3784                                 qla_printk(KERN_WARNING, ha,
3785                                     "[ERROR] Failed to load segment %d of "
3786                                     "firmware\n", fragment);
3787                                 break;
3788                         }
3789
3790                         faddr += dlen;
3791                         risc_addr += dlen;
3792                         risc_size -= dlen;
3793                         fragment++;
3794                 }
3795
3796                 /* Next segment. */
3797                 segments--;
3798         }
3799
3800         return rval;
3801 }
3802
3803 #define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"
3804
3805 int
3806 qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
3807 {
3808         int     rval;
3809         int     i, fragment;
3810         uint16_t *wcode, *fwcode;
3811         uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
3812         struct fw_blob *blob;
3813
3814         /* Load firmware blob. */
3815         blob = qla2x00_request_firmware(ha);
3816         if (!blob) {
3817                 qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
3818                 qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
3819                     "from: " QLA_FW_URL ".\n");
3820                 return QLA_FUNCTION_FAILED;
3821         }
3822
3823         rval = QLA_SUCCESS;
3824
3825         wcode = (uint16_t *)ha->request_ring;
3826         *srisc_addr = 0;
3827         fwcode = (uint16_t *)blob->fw->data;
3828         fwclen = 0;
3829
3830         /* Validate firmware image by checking version. */
3831         if (blob->fw->size < 8 * sizeof(uint16_t)) {
3832                 qla_printk(KERN_WARNING, ha,
3833                     "Unable to verify integrity of firmware image (%Zd)!\n",
3834                     blob->fw->size);
3835                 goto fail_fw_integrity;
3836         }
3837         for (i = 0; i < 4; i++)
3838                 wcode[i] = be16_to_cpu(fwcode[i + 4]);
3839         if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
3840             wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
3841                 wcode[2] == 0 && wcode[3] == 0)) {
3842                 qla_printk(KERN_WARNING, ha,
3843                     "Unable to verify integrity of firmware image!\n");
3844                 qla_printk(KERN_WARNING, ha,
3845                     "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
3846                     wcode[1], wcode[2], wcode[3]);
3847                 goto fail_fw_integrity;
3848         }
3849
3850         seg = blob->segs;
3851         while (*seg && rval == QLA_SUCCESS) {
3852                 risc_addr = *seg;
3853                 *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
3854                 risc_size = be16_to_cpu(fwcode[3]);
3855
3856                 /* Validate firmware image size. */
3857                 fwclen += risc_size * sizeof(uint16_t);
3858                 if (blob->fw->size < fwclen) {
3859                         qla_printk(KERN_WARNING, ha,
3860                             "Unable to verify integrity of firmware image "
3861                             "(%Zd)!\n", blob->fw->size);
3862                         goto fail_fw_integrity;
3863                 }
3864
3865                 fragment = 0;
3866                 while (risc_size > 0 && rval == QLA_SUCCESS) {
3867                         wlen = (uint16_t)(ha->fw_transfer_size >> 1);
3868                         if (wlen > risc_size)
3869                                 wlen = risc_size;
3870
3871                         DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
3872                             "addr %x, number of words 0x%x.\n", ha->host_no,
3873                             risc_addr, wlen));
3874
3875                         for (i = 0; i < wlen; i++)
3876                                 wcode[i] = swab16(fwcode[i]);
3877
3878                         rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
3879                             wlen);
3880                         if (rval) {
3881                                 DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
3882                                     "segment %d of firmware\n", ha->host_no,
3883                                     fragment));
3884                                 qla_printk(KERN_WARNING, ha,
3885                                     "[ERROR] Failed to load segment %d of "
3886                                     "firmware\n", fragment);
3887                                 break;
3888                         }
3889
3890                         fwcode += wlen;
3891                         risc_addr += wlen;
3892                         risc_size -= wlen;
3893                         fragment++;
3894                 }
3895
3896                 /* Next segment. */
3897                 seg++;
3898         }
3899         return rval;
3900
3901 fail_fw_integrity:
3902         return QLA_FUNCTION_FAILED;
3903 }
3904
3905 int
3906 qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
3907 {
3908         int     rval;
3909         int     segments, fragment;
3910         uint32_t *dcode, dlen;
3911         uint32_t risc_addr;
3912         uint32_t risc_size;
3913         uint32_t i;
3914         struct fw_blob *blob;
3915         uint32_t *fwcode, fwclen;
3916
3917         /* Load firmware blob. */
3918         blob = qla2x00_request_firmware(ha);
3919         if (!blob) {
3920                 qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
3921                 qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
3922                     "from: " QLA_FW_URL ".\n");
3923
3924                 /* Try to load RISC code from flash. */
3925                 qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
3926                     "outdated) firmware from flash.\n");
3927                 return qla24xx_load_risc_flash(ha, srisc_addr);
3928         }
3929
3930         rval = QLA_SUCCESS;
3931
3932         segments = FA_RISC_CODE_SEGMENTS;
3933         dcode = (uint32_t *)ha->request_ring;
3934         *srisc_addr = 0;
3935         fwcode = (uint32_t *)blob->fw->data;
3936         fwclen = 0;
3937
3938         /* Validate firmware image by checking version. */
3939         if (blob->fw->size < 8 * sizeof(uint32_t)) {
3940                 qla_printk(KERN_WARNING, ha,
3941                     "Unable to verify integrity of firmware image (%Zd)!\n",
3942                     blob->fw->size);
3943                 goto fail_fw_integrity;
3944         }
3945         for (i = 0; i < 4; i++)
3946                 dcode[i] = be32_to_cpu(fwcode[i + 4]);
3947         if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
3948             dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
3949             (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
3950                 dcode[3] == 0)) {
3951                 qla_printk(KERN_WARNING, ha,
3952                     "Unable to verify integrity of firmware image!\n");
3953                 qla_printk(KERN_WARNING, ha,
3954                     "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
3955                     dcode[1], dcode[2], dcode[3]);
3956                 goto fail_fw_integrity;
3957         }
3958
3959         while (segments && rval == QLA_SUCCESS) {
3960                 risc_addr = be32_to_cpu(fwcode[2]);
3961                 *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
3962                 risc_size = be32_to_cpu(fwcode[3]);
3963
3964                 /* Validate firmware image size. */
3965                 fwclen += risc_size * sizeof(uint32_t);
3966                 if (blob->fw->size < fwclen) {
3967                         qla_printk(KERN_WARNING, ha,
3968                             "Unable to verify integrity of firmware image "
3969                             "(%Zd)!\n", blob->fw->size);
3970
3971                         goto fail_fw_integrity;
3972                 }
3973
3974                 fragment = 0;
3975                 while (risc_size > 0 && rval == QLA_SUCCESS) {
3976                         dlen = (uint32_t)(ha->fw_transfer_size >> 2);
3977                         if (dlen > risc_size)
3978                                 dlen = risc_size;
3979
3980                         DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
3981                             "addr %x, number of dwords 0x%x.\n", ha->host_no,
3982                             risc_addr, dlen));
3983
3984                         for (i = 0; i < dlen; i++)
3985                                 dcode[i] = swab32(fwcode[i]);
3986
3987                         rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
3988                             dlen);
3989                         if (rval) {
3990                                 DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
3991                                     "segment %d of firmware\n", ha->host_no,
3992                                     fragment));
3993                                 qla_printk(KERN_WARNING, ha,
3994                                     "[ERROR] Failed to load segment %d of "
3995                                     "firmware\n", fragment);
3996                                 break;
3997                         }
3998
3999                         fwcode += dlen;
4000                         risc_addr += dlen;
4001                         risc_size -= dlen;
4002                         fragment++;
4003                 }
4004
4005                 /* Next segment. */
4006                 segments--;
4007         }
4008         return rval;
4009
4010 fail_fw_integrity:
4011         return QLA_FUNCTION_FAILED;
4012 }
4013
4014 void
4015 qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
4016 {
4017         int ret, retries;
4018
4019         if (!IS_FWI2_CAPABLE(ha))
4020                 return;
4021         if (!ha->fw_major_version)
4022                 return;
4023
4024         ret = qla2x00_stop_firmware(ha);
4025         for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {
4026                 qla2x00_reset_chip(ha);
4027                 if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
4028                         continue;
4029                 if (qla2x00_setup_chip(ha) != QLA_SUCCESS)
4030                         continue;
4031                 qla_printk(KERN_INFO, ha,
4032                     "Attempting retry of stop-firmware command...\n");
4033                 ret = qla2x00_stop_firmware(ha);
4034         }
4035 }
4036
4037 int
4038 qla24xx_configure_vhba(scsi_qla_host_t *ha)
4039 {
4040         int rval = QLA_SUCCESS;
4041         uint16_t mb[MAILBOX_REGISTER_COUNT];
4042
4043         if (!ha->parent)
4044                 return -EINVAL;
4045
4046         rval = qla2x00_fw_ready(ha);
4047         if (rval == QLA_SUCCESS) {
4048                 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
4049                 qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
4050         }
4051
4052         ha->flags.management_server_logged_in = 0;
4053
4054         /* Login to SNS first */
4055         qla24xx_login_fabric(ha, NPH_SNS, 0xff, 0xff, 0xfc,
4056             mb, BIT_1);
4057         if (mb[0] != MBS_COMMAND_COMPLETE) {
4058                 DEBUG15(qla_printk(KERN_INFO, ha,
4059                     "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
4060                     "mb[2]=%x mb[6]=%x mb[7]=%x\n", NPH_SNS,
4061                     mb[0], mb[1], mb[2], mb[6], mb[7]));
4062                 return (QLA_FUNCTION_FAILED);
4063         }
4064
4065         atomic_set(&ha->loop_down_timer, 0);
4066         atomic_set(&ha->loop_state, LOOP_UP);
4067         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
4068         set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
4069         rval = qla2x00_loop_resync(ha);
4070
4071         return rval;
4072 }