drivers/scsi/lpfc/lpfc_scsi.c

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2017 Broadcom. All Rights Reserved. The term      *
   5  * “Broadcom” refers to Broadcom Limited and/or its subsidiaries.  *
   6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
   7  * EMULEX and SLI are trademarks of Emulex.                        *
   8  * www.broadcom.com                                                *
   9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  10  *                                                                 *
  11  * This program is free software; you can redistribute it and/or   *
  12  * modify it under the terms of version 2 of the GNU General       *
  13  * Public License as published by the Free Software Foundation.    *
  14  * This program is distributed in the hope that it will be useful. *
  15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  20  * more details, a copy of which can be found in the file COPYING  *
  21  * included with this package.                                     *
  22  *******************************************************************/
  23 #include <linux/pci.h>
  24 #include <linux/slab.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/export.h>
  27 #include <linux/delay.h>
  28 #include <asm/unaligned.h>
  29 #include <linux/t10-pi.h>
  30 #include <linux/crc-t10dif.h>
  31 #include <net/checksum.h>
  32
  33 #include <scsi/scsi.h>
  34 #include <scsi/scsi_device.h>
  35 #include <scsi/scsi_eh.h>
  36 #include <scsi/scsi_host.h>
  37 #include <scsi/scsi_tcq.h>
  38 #include <scsi/scsi_transport_fc.h>
  39
  40 #include "lpfc_version.h"
  41 #include "lpfc_hw4.h"
  42 #include "lpfc_hw.h"
  43 #include "lpfc_sli.h"
  44 #include "lpfc_sli4.h"
  45 #include "lpfc_nl.h"
  46 #include "lpfc_disc.h"
  47 #include "lpfc.h"
  48 #include "lpfc_scsi.h"
  49 #include "lpfc_logmsg.h"
  50 #include "lpfc_crtn.h"
  51 #include "lpfc_vport.h"
  52
  53 #define LPFC_RESET_WAIT  2
  54 #define LPFC_ABORT_WAIT  2
  55
  56 int _dump_buf_done = 1;
  57
  58 static char *dif_op_str[] = {
  59         "PROT_NORMAL",
  60         "PROT_READ_INSERT",
  61         "PROT_WRITE_STRIP",
  62         "PROT_READ_STRIP",
  63         "PROT_WRITE_INSERT",
  64         "PROT_READ_PASS",
  65         "PROT_WRITE_PASS",
  66 };
  67
  68 struct scsi_dif_tuple {
  69         __be16 guard_tag;       /* Checksum */
  70         __be16 app_tag;         /* Opaque storage */
  71         __be32 ref_tag;         /* Target LBA or indirect LBA */
  72 };
  73
  74 static struct lpfc_rport_data *
  75 lpfc_rport_data_from_scsi_device(struct scsi_device *sdev)
  76 {
  77         struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata;
  78
  79         if (vport->phba->cfg_fof)
  80                 return ((struct lpfc_device_data *)sdev->hostdata)->rport_data;
  81         else
  82                 return (struct lpfc_rport_data *)sdev->hostdata;
  83 }
  84
  85 static void
  86 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
  87 static void
  88 lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
  89 static int
  90 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc);
  91
  92 static void
  93 lpfc_debug_save_data(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
  94 {
  95         void *src, *dst;
  96         struct scatterlist *sgde = scsi_sglist(cmnd);
  97
  98         if (!_dump_buf_data) {
  99                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 100                         "9050 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
 101                                 __func__);
 102                 return;
 103         }
 104
 105
 106         if (!sgde) {
 107                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 108                         "9051 BLKGRD: ERROR: data scatterlist is null\n");
 109                 return;
 110         }
 111
 112         dst = (void *) _dump_buf_data;
 113         while (sgde) {
 114                 src = sg_virt(sgde);
 115                 memcpy(dst, src, sgde->length);
 116                 dst += sgde->length;
 117                 sgde = sg_next(sgde);
 118         }
 119 }
 120
 121 static void
 122 lpfc_debug_save_dif(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
 123 {
 124         void *src, *dst;
 125         struct scatterlist *sgde = scsi_prot_sglist(cmnd);
 126
 127         if (!_dump_buf_dif) {
 128                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 129                         "9052 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
 130                                 __func__);
 131                 return;
 132         }
 133
 134         if (!sgde) {
 135                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 136                         "9053 BLKGRD: ERROR: prot scatterlist is null\n");
 137                 return;
 138         }
 139
 140         dst = _dump_buf_dif;
 141         while (sgde) {
 142                 src = sg_virt(sgde);
 143                 memcpy(dst, src, sgde->length);
 144                 dst += sgde->length;
 145                 sgde = sg_next(sgde);
 146         }
 147 }
 148
 149 static inline unsigned
 150 lpfc_cmd_blksize(struct scsi_cmnd *sc)
 151 {
 152         return sc->device->sector_size;
 153 }
 154
 155 #define LPFC_CHECK_PROTECT_GUARD        1
 156 #define LPFC_CHECK_PROTECT_REF          2
 157 static inline unsigned
 158 lpfc_cmd_protect(struct scsi_cmnd *sc, int flag)
 159 {
 160         return 1;
 161 }
 162
 163 static inline unsigned
 164 lpfc_cmd_guard_csum(struct scsi_cmnd *sc)
 165 {
 166         if (lpfc_prot_group_type(NULL, sc) == LPFC_PG_TYPE_NO_DIF)
 167                 return 0;
 168         if (scsi_host_get_guard(sc->device->host) == SHOST_DIX_GUARD_IP)
 169                 return 1;
 170         return 0;
 171 }
 172
 173 /**
 174  * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
 175  * @phba: Pointer to HBA object.
 176  * @lpfc_cmd: lpfc scsi command object pointer.
 177  *
 178  * This function is called from the lpfc_prep_task_mgmt_cmd function to
 179  * set the last bit in the response sge entry.
 180  **/
 181 static void
 182 lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
 183                                 struct lpfc_scsi_buf *lpfc_cmd)
 184 {
 185         struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
 186         if (sgl) {
 187                 sgl += 1;
 188                 sgl->word2 = le32_to_cpu(sgl->word2);
 189                 bf_set(lpfc_sli4_sge_last, sgl, 1);
 190                 sgl->word2 = cpu_to_le32(sgl->word2);
 191         }
 192 }
 193
 194 /**
 195  * lpfc_update_stats - Update statistical data for the command completion
 196  * @phba: Pointer to HBA object.
 197  * @lpfc_cmd: lpfc scsi command object pointer.
 198  *
 199  * This function is called when there is a command completion and this
 200  * function updates the statistical data for the command completion.
 201  **/
 202 static void
 203 lpfc_update_stats(struct lpfc_hba *phba, struct  lpfc_scsi_buf *lpfc_cmd)
 204 {
 205         struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
 206         struct lpfc_nodelist *pnode = rdata->pnode;
 207         struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
 208         unsigned long flags;
 209         struct Scsi_Host  *shost = cmd->device->host;
 210         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 211         unsigned long latency;
 212         int i;
 213
 214         if (cmd->result)
 215                 return;
 216
 217         latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);
 218
 219         spin_lock_irqsave(shost->host_lock, flags);
 220         if (!vport->stat_data_enabled ||
 221                 vport->stat_data_blocked ||
 222                 !pnode ||
 223                 !pnode->lat_data ||
 224                 (phba->bucket_type == LPFC_NO_BUCKET)) {
 225                 spin_unlock_irqrestore(shost->host_lock, flags);
 226                 return;
 227         }
 228
 229         if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
 230                 i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
 231                         phba->bucket_step;
 232                 /* check array subscript bounds */
 233                 if (i < 0)
 234                         i = 0;
 235                 else if (i >= LPFC_MAX_BUCKET_COUNT)
 236                         i = LPFC_MAX_BUCKET_COUNT - 1;
 237         } else {
 238                 for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
 239                         if (latency <= (phba->bucket_base +
 240                                 ((1<<i)*phba->bucket_step)))
 241                                 break;
 242         }
 243
 244         pnode->lat_data[i].cmd_count++;
 245         spin_unlock_irqrestore(shost->host_lock, flags);
 246 }
 247
 248 /**
 249  * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
 250  * @phba: The Hba for which this call is being executed.
 251  *
 252  * This routine is called when there is resource error in driver or firmware.
 253  * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
 254  * posts at most 1 event each second. This routine wakes up worker thread of
 255  * @phba to process WORKER_RAM_DOWN_EVENT event.
 256  *
 257  * This routine should be called with no lock held.
 258  **/
 259 void
 260 lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
 261 {
 262         unsigned long flags;
 263         uint32_t evt_posted;
 264         unsigned long expires;
 265
 266         spin_lock_irqsave(&phba->hbalock, flags);
 267         atomic_inc(&phba->num_rsrc_err);
 268         phba->last_rsrc_error_time = jiffies;
 269
 270         expires = phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL;
 271         if (time_after(expires, jiffies)) {
 272                 spin_unlock_irqrestore(&phba->hbalock, flags);
 273                 return;
 274         }
 275
 276         phba->last_ramp_down_time = jiffies;
 277
 278         spin_unlock_irqrestore(&phba->hbalock, flags);
 279
 280         spin_lock_irqsave(&phba->pport->work_port_lock, flags);
 281         evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE;
 282         if (!evt_posted)
 283                 phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
 284         spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
 285
 286         if (!evt_posted)
 287                 lpfc_worker_wake_up(phba);
 288         return;
 289 }
 290
 291 /**
 292  * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
 293  * @phba: The Hba for which this call is being executed.
 294  *
 295  * This routine is called to  process WORKER_RAMP_DOWN_QUEUE event for worker
 296  * thread.This routine reduces queue depth for all scsi device on each vport
 297  * associated with @phba.
 298  **/
 299 void
 300 lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 301 {
 302         struct lpfc_vport **vports;
 303         struct Scsi_Host  *shost;
 304         struct scsi_device *sdev;
 305         unsigned long new_queue_depth;
 306         unsigned long num_rsrc_err, num_cmd_success;
 307         int i;
 308
 309         num_rsrc_err = atomic_read(&phba->num_rsrc_err);
 310         num_cmd_success = atomic_read(&phba->num_cmd_success);
 311
 312         /*
 313          * The error and success command counters are global per
 314          * driver instance.  If another handler has already
 315          * operated on this error event, just exit.
 316          */
 317         if (num_rsrc_err == 0)
 318                 return;
 319
 320         vports = lpfc_create_vport_work_array(phba);
 321         if (vports != NULL)
 322                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 323                         shost = lpfc_shost_from_vport(vports[i]);
 324                         shost_for_each_device(sdev, shost) {
 325                                 new_queue_depth =
 326                                         sdev->queue_depth * num_rsrc_err /
 327                                         (num_rsrc_err + num_cmd_success);
 328                                 if (!new_queue_depth)
 329                                         new_queue_depth = sdev->queue_depth - 1;
 330                                 else
 331                                         new_queue_depth = sdev->queue_depth -
 332                                                                 new_queue_depth;
 333                                 scsi_change_queue_depth(sdev, new_queue_depth);
 334                         }
 335                 }
 336         lpfc_destroy_vport_work_array(phba, vports);
 337         atomic_set(&phba->num_rsrc_err, 0);
 338         atomic_set(&phba->num_cmd_success, 0);
 339 }
 340
 341 /**
 342  * lpfc_scsi_dev_block - set all scsi hosts to block state
 343  * @phba: Pointer to HBA context object.
 344  *
 345  * This function walks vport list and set each SCSI host to block state
 346  * by invoking fc_remote_port_delete() routine. This function is invoked
 347  * with EEH when device's PCI slot has been permanently disabled.
 348  **/
 349 void
 350 lpfc_scsi_dev_block(struct lpfc_hba *phba)
 351 {
 352         struct lpfc_vport **vports;
 353         struct Scsi_Host  *shost;
 354         struct scsi_device *sdev;
 355         struct fc_rport *rport;
 356         int i;
 357
 358         vports = lpfc_create_vport_work_array(phba);
 359         if (vports != NULL)
 360                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 361                         shost = lpfc_shost_from_vport(vports[i]);
 362                         shost_for_each_device(sdev, shost) {
 363                                 rport = starget_to_rport(scsi_target(sdev));
 364                                 fc_remote_port_delete(rport);
 365                         }
 366                 }
 367         lpfc_destroy_vport_work_array(phba, vports);
 368 }
 369
 370 /**
 371  * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
 372  * @vport: The virtual port for which this call being executed.
 373  * @num_to_allocate: The requested number of buffers to allocate.
 374  *
 375  * This routine allocates a scsi buffer for device with SLI-3 interface spec,
 376  * the scsi buffer contains all the necessary information needed to initiate
 377  * a SCSI I/O. The non-DMAable buffer region contains information to build
 378  * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
 379  * and the initial BPL. In addition to allocating memory, the FCP CMND and
 380  * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
 381  *
 382  * Return codes:
 383  *   int - number of scsi buffers that were allocated.
 384  *   0 = failure, less than num_to_alloc is a partial failure.
 385  **/
 386 static int
 387 lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 388 {
 389         struct lpfc_hba *phba = vport->phba;
 390         struct lpfc_scsi_buf *psb;
 391         struct ulp_bde64 *bpl;
 392         IOCB_t *iocb;
 393         dma_addr_t pdma_phys_fcp_cmd;
 394         dma_addr_t pdma_phys_fcp_rsp;
 395         dma_addr_t pdma_phys_bpl;
 396         uint16_t iotag;
 397         int bcnt, bpl_size;
 398
 399         bpl_size = phba->cfg_sg_dma_buf_size -
 400                 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
 401
 402         lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 403                          "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
 404                          num_to_alloc, phba->cfg_sg_dma_buf_size,
 405                          (int)sizeof(struct fcp_cmnd),
 406                          (int)sizeof(struct fcp_rsp), bpl_size);
 407
 408         for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
 409                 psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
 410                 if (!psb)
 411                         break;
 412
 413                 /*
 414                  * Get memory from the pci pool to map the virt space to pci
 415                  * bus space for an I/O.  The DMA buffer includes space for the
 416                  * struct fcp_cmnd, struct fcp_rsp and the number of bde's
 417                  * necessary to support the sg_tablesize.
 418                  */
 419                 psb->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
 420                                         GFP_KERNEL, &psb->dma_handle);
 421                 if (!psb->data) {
 422                         kfree(psb);
 423                         break;
 424                 }
 425
 426
 427                 /* Allocate iotag for psb->cur_iocbq. */
 428                 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
 429                 if (iotag == 0) {
 430                         dma_pool_free(phba->lpfc_sg_dma_buf_pool,
 431                                       psb->data, psb->dma_handle);
 432                         kfree(psb);
 433                         break;
 434                 }
 435                 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
 436
 437                 psb->fcp_cmnd = psb->data;
 438                 psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
 439                 psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
 440                         sizeof(struct fcp_rsp);
 441
 442                 /* Initialize local short-hand pointers. */
 443                 bpl = psb->fcp_bpl;
 444                 pdma_phys_fcp_cmd = psb->dma_handle;
 445                 pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
 446                 pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
 447                         sizeof(struct fcp_rsp);
 448
 449                 /*
 450                  * The first two bdes are the FCP_CMD and FCP_RSP. The balance
 451                  * are sg list bdes.  Initialize the first two and leave the
 452                  * rest for queuecommand.
 453                  */
 454                 bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
 455                 bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
 456                 bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
 457                 bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
 458                 bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
 459
 460                 /* Setup the physical region for the FCP RSP */
 461                 bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
 462                 bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
 463                 bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
 464                 bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
 465                 bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
 466
 467                 /*
 468                  * Since the IOCB for the FCP I/O is built into this
 469                  * lpfc_scsi_buf, initialize it with all known data now.
 470                  */
 471                 iocb = &psb->cur_iocbq.iocb;
 472                 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
 473                 if ((phba->sli_rev == 3) &&
 474                                 !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
 475                         /* fill in immediate fcp command BDE */
 476                         iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
 477                         iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
 478                         iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
 479                                         unsli3.fcp_ext.icd);
 480                         iocb->un.fcpi64.bdl.addrHigh = 0;
 481                         iocb->ulpBdeCount = 0;
 482                         iocb->ulpLe = 0;
 483                         /* fill in response BDE */
 484                         iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
 485                                                         BUFF_TYPE_BDE_64;
 486                         iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
 487                                 sizeof(struct fcp_rsp);
 488                         iocb->unsli3.fcp_ext.rbde.addrLow =
 489                                 putPaddrLow(pdma_phys_fcp_rsp);
 490                         iocb->unsli3.fcp_ext.rbde.addrHigh =
 491                                 putPaddrHigh(pdma_phys_fcp_rsp);
 492                 } else {
 493                         iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
 494                         iocb->un.fcpi64.bdl.bdeSize =
 495                                         (2 * sizeof(struct ulp_bde64));
 496                         iocb->un.fcpi64.bdl.addrLow =
 497                                         putPaddrLow(pdma_phys_bpl);
 498                         iocb->un.fcpi64.bdl.addrHigh =
 499                                         putPaddrHigh(pdma_phys_bpl);
 500                         iocb->ulpBdeCount = 1;
 501                         iocb->ulpLe = 1;
 502                 }
 503                 iocb->ulpClass = CLASS3;
 504                 psb->status = IOSTAT_SUCCESS;
 505                 /* Put it back into the SCSI buffer list */
 506                 psb->cur_iocbq.context1  = psb;
 507                 lpfc_release_scsi_buf_s3(phba, psb);
 508
 509         }
 510
 511         return bcnt;
 512 }
 513
 514 /**
 515  * lpfc_sli4_vport_delete_fcp_xri_aborted -Remove all ndlp references for vport
 516  * @vport: pointer to lpfc vport data structure.
 517  *
 518  * This routine is invoked by the vport cleanup for deletions and the cleanup
 519  * for an ndlp on removal.
 520  **/
 521 void
 522 lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
 523 {
 524         struct lpfc_hba *phba = vport->phba;
 525         struct lpfc_scsi_buf *psb, *next_psb;
 526         unsigned long iflag = 0;
 527
 528         if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
 529                 return;
 530         spin_lock_irqsave(&phba->hbalock, iflag);
 531         spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
 532         list_for_each_entry_safe(psb, next_psb,
 533                                 &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
 534                 if (psb->rdata && psb->rdata->pnode
 535                         && psb->rdata->pnode->vport == vport)
 536                         psb->rdata = NULL;
 537         }
 538         spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
 539         spin_unlock_irqrestore(&phba->hbalock, iflag);
 540 }
 541
 542 /**
 543  * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
 544  * @phba: pointer to lpfc hba data structure.
 545  * @axri: pointer to the fcp xri abort wcqe structure.
 546  *
 547  * This routine is invoked by the worker thread to process a SLI4 fast-path
 548  * FCP aborted xri.
 549  **/
 550 void
 551 lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 552                           struct sli4_wcqe_xri_aborted *axri)
 553 {
 554         uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
 555         uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
 556         struct lpfc_scsi_buf *psb, *next_psb;
 557         unsigned long iflag = 0;
 558         struct lpfc_iocbq *iocbq;
 559         int i;
 560         struct lpfc_nodelist *ndlp;
 561         int rrq_empty = 0;
 562         struct lpfc_sli_ring *pring = phba->sli4_hba.els_wq->pring;
 563
 564         if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
 565                 return;
 566         spin_lock_irqsave(&phba->hbalock, iflag);
 567         spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
 568         list_for_each_entry_safe(psb, next_psb,
 569                 &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
 570                 if (psb->cur_iocbq.sli4_xritag == xri) {
 571                         list_del(&psb->list);
 572                         psb->exch_busy = 0;
 573                         psb->status = IOSTAT_SUCCESS;
 574                         spin_unlock(
 575                                 &phba->sli4_hba.abts_scsi_buf_list_lock);
 576                         if (psb->rdata && psb->rdata->pnode)
 577                                 ndlp = psb->rdata->pnode;
 578                         else
 579                                 ndlp = NULL;
 580
 581                         rrq_empty = list_empty(&phba->active_rrq_list);
 582                         spin_unlock_irqrestore(&phba->hbalock, iflag);
 583                         if (ndlp) {
 584                                 lpfc_set_rrq_active(phba, ndlp,
 585                                         psb->cur_iocbq.sli4_lxritag, rxid, 1);
 586                                 lpfc_sli4_abts_err_handler(phba, ndlp, axri);
 587                         }
 588                         lpfc_release_scsi_buf_s4(phba, psb);
 589                         if (rrq_empty)
 590                                 lpfc_worker_wake_up(phba);
 591                         return;
 592                 }
 593         }
 594         spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
 595         for (i = 1; i <= phba->sli.last_iotag; i++) {
 596                 iocbq = phba->sli.iocbq_lookup[i];
 597
 598                 if (!(iocbq->iocb_flag &  LPFC_IO_FCP) ||
 599                         (iocbq->iocb_flag & LPFC_IO_LIBDFC))
 600                         continue;
 601                 if (iocbq->sli4_xritag != xri)
 602                         continue;
 603                 psb = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
 604                 psb->exch_busy = 0;
 605                 spin_unlock_irqrestore(&phba->hbalock, iflag);
 606                 if (!list_empty(&pring->txq))
 607                         lpfc_worker_wake_up(phba);
 608                 return;
 609
 610         }
 611         spin_unlock_irqrestore(&phba->hbalock, iflag);
 612 }
 613
 614 /**
 615  * lpfc_sli4_post_scsi_sgl_list - Post blocks of scsi buffer sgls from a list
 616  * @phba: pointer to lpfc hba data structure.
 617  * @post_sblist: pointer to the scsi buffer list.
 618  *
 619  * This routine walks a list of scsi buffers that was passed in. It attempts
 620  * to construct blocks of scsi buffer sgls which contains contiguous xris and
 621  * uses the non-embedded SGL block post mailbox commands to post to the port.
 622  * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
 623  * embedded SGL post mailbox command for posting. The @post_sblist passed in
 624  * must be local list, thus no lock is needed when manipulate the list.
 625  *
 626  * Returns: 0 = failure, non-zero number of successfully posted buffers.
 627  **/
 628 static int
 629 lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
 630                              struct list_head *post_sblist, int sb_count)
 631 {
 632         struct lpfc_scsi_buf *psb, *psb_next;
 633         int status, sgl_size;
 634         int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
 635         dma_addr_t pdma_phys_bpl1;
 636         int last_xritag = NO_XRI;
 637         LIST_HEAD(prep_sblist);
 638         LIST_HEAD(blck_sblist);
 639         LIST_HEAD(scsi_sblist);
 640
 641         /* sanity check */
 642         if (sb_count <= 0)
 643                 return -EINVAL;
 644
 645         sgl_size = phba->cfg_sg_dma_buf_size -
 646                 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
 647
 648         list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
 649                 list_del_init(&psb->list);
 650                 block_cnt++;
 651                 if ((last_xritag != NO_XRI) &&
 652                     (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
 653                         /* a hole in xri block, form a sgl posting block */
 654                         list_splice_init(&prep_sblist, &blck_sblist);
 655                         post_cnt = block_cnt - 1;
 656                         /* prepare list for next posting block */
 657                         list_add_tail(&psb->list, &prep_sblist);
 658                         block_cnt = 1;
 659                 } else {
 660                         /* prepare list for next posting block */
 661                         list_add_tail(&psb->list, &prep_sblist);
 662                         /* enough sgls for non-embed sgl mbox command */
 663                         if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
 664                                 list_splice_init(&prep_sblist, &blck_sblist);
 665                                 post_cnt = block_cnt;
 666                                 block_cnt = 0;
 667                         }
 668                 }
 669                 num_posting++;
 670                 last_xritag = psb->cur_iocbq.sli4_xritag;
 671
 672                 /* end of repost sgl list condition for SCSI buffers */
 673                 if (num_posting == sb_count) {
 674                         if (post_cnt == 0) {
 675                                 /* last sgl posting block */
 676                                 list_splice_init(&prep_sblist, &blck_sblist);
 677                                 post_cnt = block_cnt;
 678                         } else if (block_cnt == 1) {
 679                                 /* last single sgl with non-contiguous xri */
 680                                 if (sgl_size > SGL_PAGE_SIZE)
 681                                         pdma_phys_bpl1 = psb->dma_phys_bpl +
 682                                                                 SGL_PAGE_SIZE;
 683                                 else
 684                                         pdma_phys_bpl1 = 0;
 685                                 status = lpfc_sli4_post_sgl(phba,
 686                                                 psb->dma_phys_bpl,
 687                                                 pdma_phys_bpl1,
 688                                                 psb->cur_iocbq.sli4_xritag);
 689                                 if (status) {
 690                                         /* failure, put on abort scsi list */
 691                                         psb->exch_busy = 1;
 692                                 } else {
 693                                         /* success, put on SCSI buffer list */
 694                                         psb->exch_busy = 0;
 695                                         psb->status = IOSTAT_SUCCESS;
 696                                         num_posted++;
 697                                 }
 698                                 /* success, put on SCSI buffer sgl list */
 699                                 list_add_tail(&psb->list, &scsi_sblist);
 700                         }
 701                 }
 702
 703                 /* continue until a nembed page worth of sgls */
 704                 if (post_cnt == 0)
 705                         continue;
 706
 707                 /* post block of SCSI buffer list sgls */
 708                 status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
 709                                                        post_cnt);
 710
 711                 /* don't reset xirtag due to hole in xri block */
 712                 if (block_cnt == 0)
 713                         last_xritag = NO_XRI;
 714
 715                 /* reset SCSI buffer post count for next round of posting */
 716                 post_cnt = 0;
 717
 718                 /* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
 719                 while (!list_empty(&blck_sblist)) {
 720                         list_remove_head(&blck_sblist, psb,
 721                                          struct lpfc_scsi_buf, list);
 722                         if (status) {
 723                                 /* failure, put on abort scsi list */
 724                                 psb->exch_busy = 1;
 725                         } else {
 726                                 /* success, put on SCSI buffer list */
 727                                 psb->exch_busy = 0;
 728                                 psb->status = IOSTAT_SUCCESS;
 729                                 num_posted++;
 730                         }
 731                         list_add_tail(&psb->list, &scsi_sblist);
 732                 }
 733         }
 734         /* Push SCSI buffers with sgl posted to the availble list */
 735         while (!list_empty(&scsi_sblist)) {
 736                 list_remove_head(&scsi_sblist, psb,
 737                                  struct lpfc_scsi_buf, list);
 738                 lpfc_release_scsi_buf_s4(phba, psb);
 739         }
 740         return num_posted;
 741 }
 742
 743 /**
 744  * lpfc_sli4_repost_scsi_sgl_list - Repost all the allocated scsi buffer sgls
 745  * @phba: pointer to lpfc hba data structure.
 746  *
 747  * This routine walks the list of scsi buffers that have been allocated and
 748  * repost them to the port by using SGL block post. This is needed after a
 749  * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
 750  * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
 751  * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
 752  *
 753  * Returns: 0 = success, non-zero failure.
 754  **/
 755 int
 756 lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
 757 {
 758         LIST_HEAD(post_sblist);
 759         int num_posted, rc = 0;
 760
 761         /* get all SCSI buffers need to repost to a local list */
 762         spin_lock_irq(&phba->scsi_buf_list_get_lock);
 763         spin_lock(&phba->scsi_buf_list_put_lock);
 764         list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist);
 765         list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist);
 766         spin_unlock(&phba->scsi_buf_list_put_lock);
 767         spin_unlock_irq(&phba->scsi_buf_list_get_lock);
 768
 769         /* post the list of scsi buffer sgls to port if available */
 770         if (!list_empty(&post_sblist)) {
 771                 num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
 772                                                 phba->sli4_hba.scsi_xri_cnt);
 773                 /* failed to post any scsi buffer, return error */
 774                 if (num_posted == 0)
 775                         rc = -EIO;
 776         }
 777         return rc;
 778 }
 779
 780 /**
 781  * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
 782  * @vport: The virtual port for which this call being executed.
 783  * @num_to_allocate: The requested number of buffers to allocate.
 784  *
 785  * This routine allocates scsi buffers for device with SLI-4 interface spec,
 786  * the scsi buffer contains all the necessary information needed to initiate
 787  * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
 788  * them on a list, it post them to the port by using SGL block post.
 789  *
 790  * Return codes:
 791  *   int - number of scsi buffers that were allocated and posted.
 792  *   0 = failure, less than num_to_alloc is a partial failure.
 793  **/
 794 static int
 795 lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
 796 {
 797         struct lpfc_hba *phba = vport->phba;
 798         struct lpfc_scsi_buf *psb;
 799         struct sli4_sge *sgl;
 800         IOCB_t *iocb;
 801         dma_addr_t pdma_phys_fcp_cmd;
 802         dma_addr_t pdma_phys_fcp_rsp;
 803         dma_addr_t pdma_phys_bpl;
 804         uint16_t iotag, lxri = 0;
 805         int bcnt, num_posted, sgl_size;
 806         LIST_HEAD(prep_sblist);
 807         LIST_HEAD(post_sblist);
 808         LIST_HEAD(scsi_sblist);
 809
 810         sgl_size = phba->cfg_sg_dma_buf_size -
 811                 (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
 812
 813         lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 814                          "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
 815                          num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
 816                          (int)sizeof(struct fcp_cmnd),
 817                          (int)sizeof(struct fcp_rsp));
 818
 819         for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
 820                 psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
 821                 if (!psb)
 822                         break;
 823                 /*
 824                  * Get memory from the pci pool to map the virt space to
 825                  * pci bus space for an I/O. The DMA buffer includes space
 826                  * for the struct fcp_cmnd, struct fcp_rsp and the number
 827                  * of bde's necessary to support the sg_tablesize.
 828                  */
 829                 psb->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
 830                                                 GFP_KERNEL, &psb->dma_handle);
 831                 if (!psb->data) {
 832                         kfree(psb);
 833                         break;
 834                 }
 835
 836                 /*
 837                  * 4K Page alignment is CRITICAL to BlockGuard, double check
 838                  * to be sure.
 839                  */
 840                 if (phba->cfg_enable_bg  && (((unsigned long)(psb->data) &
 841                     (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
 842                         dma_pool_free(phba->lpfc_sg_dma_buf_pool,
 843                                       psb->data, psb->dma_handle);
 844                         kfree(psb);
 845                         break;
 846                 }
 847
 848
 849                 lxri = lpfc_sli4_next_xritag(phba);
 850                 if (lxri == NO_XRI) {
 851                         dma_pool_free(phba->lpfc_sg_dma_buf_pool,
 852                                       psb->data, psb->dma_handle);
 853                         kfree(psb);
 854                         break;
 855                 }
 856
 857                 /* Allocate iotag for psb->cur_iocbq. */
 858                 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
 859                 if (iotag == 0) {
 860                         dma_pool_free(phba->lpfc_sg_dma_buf_pool,
 861                                       psb->data, psb->dma_handle);
 862                         kfree(psb);
 863                         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
 864                                         "3368 Failed to allocate IOTAG for"
 865                                         " XRI:0x%x\n", lxri);
 866                         lpfc_sli4_free_xri(phba, lxri);
 867                         break;
 868                 }
 869                 psb->cur_iocbq.sli4_lxritag = lxri;
 870                 psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
 871                 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
 872                 psb->fcp_bpl = psb->data;
 873                 psb->fcp_cmnd = (psb->data + sgl_size);
 874                 psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
 875                                         sizeof(struct fcp_cmnd));
 876
 877                 /* Initialize local short-hand pointers. */
 878                 sgl = (struct sli4_sge *)psb->fcp_bpl;
 879                 pdma_phys_bpl = psb->dma_handle;
 880                 pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
 881                 pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
 882
 883                 /*
 884                  * The first two bdes are the FCP_CMD and FCP_RSP.
 885                  * The balance are sg list bdes. Initialize the
 886                  * first two and leave the rest for queuecommand.
 887                  */
 888                 sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
 889                 sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
 890                 sgl->word2 = le32_to_cpu(sgl->word2);
 891                 bf_set(lpfc_sli4_sge_last, sgl, 0);
 892                 sgl->word2 = cpu_to_le32(sgl->word2);
 893                 sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
 894                 sgl++;
 895
 896                 /* Setup the physical region for the FCP RSP */
 897                 sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
 898                 sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
 899                 sgl->word2 = le32_to_cpu(sgl->word2);
 900                 bf_set(lpfc_sli4_sge_last, sgl, 1);
 901                 sgl->word2 = cpu_to_le32(sgl->word2);
 902                 sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
 903
 904                 /*
 905                  * Since the IOCB for the FCP I/O is built into this
 906                  * lpfc_scsi_buf, initialize it with all known data now.
 907                  */
 908                 iocb = &psb->cur_iocbq.iocb;
 909                 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
 910                 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
 911                 /* setting the BLP size to 2 * sizeof BDE may not be correct.
 912                  * We are setting the bpl to point to out sgl. An sgl's
 913                  * entries are 16 bytes, a bpl entries are 12 bytes.
 914                  */
 915                 iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
 916                 iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
 917                 iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
 918                 iocb->ulpBdeCount = 1;
 919                 iocb->ulpLe = 1;
 920                 iocb->ulpClass = CLASS3;
 921                 psb->cur_iocbq.context1 = psb;
 922                 psb->dma_phys_bpl = pdma_phys_bpl;
 923
 924                 /* add the scsi buffer to a post list */
 925                 list_add_tail(&psb->list, &post_sblist);
 926                 spin_lock_irq(&phba->scsi_buf_list_get_lock);
 927                 phba->sli4_hba.scsi_xri_cnt++;
 928                 spin_unlock_irq(&phba->scsi_buf_list_get_lock);
 929         }
 930         lpfc_printf_log(phba, KERN_INFO, LOG_BG | LOG_FCP,
 931                         "3021 Allocate %d out of %d requested new SCSI "
 932                         "buffers\n", bcnt, num_to_alloc);
 933
 934         /* post the list of scsi buffer sgls to port if available */
 935         if (!list_empty(&post_sblist))
 936                 num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
 937                                                           &post_sblist, bcnt);
 938         else
 939                 num_posted = 0;
 940
 941         return num_posted;
 942 }
 943
 944 /**
 945  * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
 946  * @vport: The virtual port for which this call being executed.
 947  * @num_to_allocate: The requested number of buffers to allocate.
 948  *
 949  * This routine wraps the actual SCSI buffer allocator function pointer from
 950  * the lpfc_hba struct.
 951  *
 952  * Return codes:
 953  *   int - number of scsi buffers that were allocated.
 954  *   0 = failure, less than num_to_alloc is a partial failure.
 955  **/
 956 static inline int
 957 lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
 958 {
 959         return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
 960 }
 961
 962 /**
 963  * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
 964  * @phba: The HBA for which this call is being executed.
 965  *
 966  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
 967  * and returns to caller.
 968  *
 969  * Return codes:
 970  *   NULL - Error
 971  *   Pointer to lpfc_scsi_buf - Success
 972  **/
 973 static struct lpfc_scsi_buf*
 974 lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 975 {
 976         struct  lpfc_scsi_buf * lpfc_cmd = NULL;
 977         struct list_head *scsi_buf_list_get = &phba->lpfc_scsi_buf_list_get;
 978         unsigned long iflag = 0;
 979
 980         spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag);
 981         list_remove_head(scsi_buf_list_get, lpfc_cmd, struct lpfc_scsi_buf,
 982                          list);
 983         if (!lpfc_cmd) {
 984                 spin_lock(&phba->scsi_buf_list_put_lock);
 985                 list_splice(&phba->lpfc_scsi_buf_list_put,
 986                             &phba->lpfc_scsi_buf_list_get);
 987                 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
 988                 list_remove_head(scsi_buf_list_get, lpfc_cmd,
 989                                  struct lpfc_scsi_buf, list);
 990                 spin_unlock(&phba->scsi_buf_list_put_lock);
 991         }
 992         spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
 993         return  lpfc_cmd;
 994 }
 995 /**
 996  * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
 997  * @phba: The HBA for which this call is being executed.
 998  *
 999  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
1000  * and returns to caller.
1001  *
1002  * Return codes:
1003  *   NULL - Error
1004  *   Pointer to lpfc_scsi_buf - Success
1005  **/
1006 static struct lpfc_scsi_buf*
1007 lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
1008 {
1009         struct lpfc_scsi_buf *lpfc_cmd, *lpfc_cmd_next;
1010         unsigned long iflag = 0;
1011         int found = 0;
1012
1013         spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag);
1014         list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
1015                                  &phba->lpfc_scsi_buf_list_get, list) {
1016                 if (lpfc_test_rrq_active(phba, ndlp,
1017                                          lpfc_cmd->cur_iocbq.sli4_lxritag))
1018                         continue;
1019                 list_del(&lpfc_cmd->list);
1020                 found = 1;
1021                 break;
1022         }
1023         if (!found) {
1024                 spin_lock(&phba->scsi_buf_list_put_lock);
1025                 list_splice(&phba->lpfc_scsi_buf_list_put,
1026                             &phba->lpfc_scsi_buf_list_get);
1027                 INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
1028                 spin_unlock(&phba->scsi_buf_list_put_lock);
1029                 list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
1030                                          &phba->lpfc_scsi_buf_list_get, list) {
1031                         if (lpfc_test_rrq_active(
1032                                 phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag))
1033                                 continue;
1034                         list_del(&lpfc_cmd->list);
1035                         found = 1;
1036                         break;
1037                 }
1038         }
1039         spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
1040         if (!found)
1041                 return NULL;
1042         return  lpfc_cmd;
1043 }
1044 /**
1045  * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
1046  * @phba: The HBA for which this call is being executed.
1047  *
1048  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
1049  * and returns to caller.
1050  *
1051  * Return codes:
1052  *   NULL - Error
1053  *   Pointer to lpfc_scsi_buf - Success
1054  **/
1055 static struct lpfc_scsi_buf*
1056 lpfc_get_scsi_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
1057 {
1058         return  phba->lpfc_get_scsi_buf(phba, ndlp);
1059 }
1060
1061 /**
1062  * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
1063  * @phba: The Hba for which this call is being executed.
1064  * @psb: The scsi buffer which is being released.
1065  *
1066  * This routine releases @psb scsi buffer by adding it to tail of @phba
1067  * lpfc_scsi_buf_list list.
1068  **/
1069 static void
1070 lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1071 {
1072         unsigned long iflag = 0;
1073
1074         psb->seg_cnt = 0;
1075         psb->nonsg_phys = 0;
1076         psb->prot_seg_cnt = 0;
1077
1078         spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
1079         psb->pCmd = NULL;
1080         psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1081         list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
1082         spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
1083 }
1084
1085 /**
1086  * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
1087  * @phba: The Hba for which this call is being executed.
1088  * @psb: The scsi buffer which is being released.
1089  *
1090  * This routine releases @psb scsi buffer by adding it to tail of @phba
1091  * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
1092  * and cannot be reused for at least RA_TOV amount of time if it was
1093  * aborted.
1094  **/
1095 static void
1096 lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1097 {
1098         unsigned long iflag = 0;
1099
1100         psb->seg_cnt = 0;
1101         psb->nonsg_phys = 0;
1102         psb->prot_seg_cnt = 0;
1103
1104         if (psb->exch_busy) {
1105                 spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
1106                                         iflag);
1107                 psb->pCmd = NULL;
1108                 list_add_tail(&psb->list,
1109                         &phba->sli4_hba.lpfc_abts_scsi_buf_list);
1110                 spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
1111                                         iflag);
1112         } else {
1113                 psb->pCmd = NULL;
1114                 psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1115                 spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
1116                 list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
1117                 spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
1118         }
1119 }
1120
1121 /**
1122  * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
1123  * @phba: The Hba for which this call is being executed.
1124  * @psb: The scsi buffer which is being released.
1125  *
1126  * This routine releases @psb scsi buffer by adding it to tail of @phba
1127  * lpfc_scsi_buf_list list.
1128  **/
1129 static void
1130 lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1131 {
1132
1133         phba->lpfc_release_scsi_buf(phba, psb);
1134 }
1135
1136 /**
1137  * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
1138  * @phba: The Hba for which this call is being executed.
1139  * @lpfc_cmd: The scsi buffer which is going to be mapped.
1140  *
1141  * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
1142  * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
1143  * through sg elements and format the bde. This routine also initializes all
1144  * IOCB fields which are dependent on scsi command request buffer.
1145  *
1146  * Return codes:
1147  *   1 - Error
1148  *   0 - Success
1149  **/
1150 static int
1151 lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
1152 {
1153         struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
1154         struct scatterlist *sgel = NULL;
1155         struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
1156         struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
1157         struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq;
1158         IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
1159         struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
1160         dma_addr_t physaddr;
1161         uint32_t num_bde = 0;
1162         int nseg, datadir = scsi_cmnd->sc_data_direction;
1163
1164         /*
1165          * There are three possibilities here - use scatter-gather segment, use
1166          * the single mapping, or neither.  Start the lpfc command prep by
1167          * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
1168          * data bde entry.
1169          */
1170         bpl += 2;
1171         if (scsi_sg_count(scsi_cmnd)) {
1172                 /*
1173                  * The driver stores the segment count returned from pci_map_sg
1174                  * because this a count of dma-mappings used to map the use_sg
1175                  * pages.  They are not guaranteed to be the same for those
1176                  * architectures that implement an IOMMU.
1177                  */
1178
1179                 nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
1180                                   scsi_sg_count(scsi_cmnd), datadir);
1181                 if (unlikely(!nseg))
1182                         return 1;
1183
1184                 lpfc_cmd->seg_cnt = nseg;
1185                 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
1186                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1187                                 "9064 BLKGRD: %s: Too many sg segments from "
1188                                "dma_map_sg.  Config %d, seg_cnt %d\n",
1189                                __func__, phba->cfg_sg_seg_cnt,
1190                                lpfc_cmd->seg_cnt);
1191                         lpfc_cmd->seg_cnt = 0;
1192                         scsi_dma_unmap(scsi_cmnd);
1193                         return 1;
1194                 }
1195
1196                 /*
1197                  * The driver established a maximum scatter-gather segment count
1198                  * during probe that limits the number of sg elements in any
1199                  * single scsi command.  Just run through the seg_cnt and format
1200                  * the bde's.
1201                  * When using SLI-3 the driver will try to fit all the BDEs into
1202                  * the IOCB. If it can't then the BDEs get added to a BPL as it
1203                  * does for SLI-2 mode.
1204                  */
1205                 scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
1206                         physaddr = sg_dma_address(sgel);
1207                         if (phba->sli_rev == 3 &&
1208                             !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
1209                             !(iocbq->iocb_flag & DSS_SECURITY_OP) &&
1210                             nseg <= LPFC_EXT_DATA_BDE_COUNT) {
1211                                 data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1212                                 data_bde->tus.f.bdeSize = sg_dma_len(sgel);
1213                                 data_bde->addrLow = putPaddrLow(physaddr);
1214                                 data_bde->addrHigh = putPaddrHigh(physaddr);
1215                                 data_bde++;
1216                         } else {
1217                                 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1218                                 bpl->tus.f.bdeSize = sg_dma_len(sgel);
1219                                 bpl->tus.w = le32_to_cpu(bpl->tus.w);
1220                                 bpl->addrLow =
1221                                         le32_to_cpu(putPaddrLow(physaddr));
1222                                 bpl->addrHigh =
1223                                         le32_to_cpu(putPaddrHigh(physaddr));
1224                                 bpl++;
1225                         }
1226                 }
1227         }
1228
1229         /*
1230          * Finish initializing those IOCB fields that are dependent on the
1231          * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
1232          * explicitly reinitialized and for SLI-3 the extended bde count is
1233          * explicitly reinitialized since all iocb memory resources are reused.
1234          */
1235         if (phba->sli_rev == 3 &&
1236             !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
1237             !(iocbq->iocb_flag & DSS_SECURITY_OP)) {
1238                 if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
1239                         /*
1240                          * The extended IOCB format can only fit 3 BDE or a BPL.
1241                          * This I/O has more than 3 BDE so the 1st data bde will
1242                          * be a BPL that is filled in here.
1243                          */
1244                         physaddr = lpfc_cmd->dma_handle;
1245                         data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
1246                         data_bde->tus.f.bdeSize = (num_bde *
1247                                                    sizeof(struct ulp_bde64));
1248                         physaddr += (sizeof(struct fcp_cmnd) +
1249                                      sizeof(struct fcp_rsp) +
1250                                      (2 * sizeof(struct ulp_bde64)));
1251                         data_bde->addrHigh = putPaddrHigh(physaddr);
1252                         data_bde->addrLow = putPaddrLow(physaddr);
1253                         /* ebde count includes the response bde and data bpl */
1254                         iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
1255                 } else {
1256                         /* ebde count includes the response bde and data bdes */
1257                         iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
1258                 }
1259         } else {
1260                 iocb_cmd->un.fcpi64.bdl.bdeSize =
1261                         ((num_bde + 2) * sizeof(struct ulp_bde64));
1262                 iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
1263         }
1264         fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
1265
1266         /*
1267          * Due to difference in data length between DIF/non-DIF paths,
1268          * we need to set word 4 of IOCB here
1269          */
1270         iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
1271         return 0;
1272 }
1273
1274 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1275
1276 /* Return BG_ERR_INIT if error injection is detected by Initiator */
1277 #define BG_ERR_INIT     0x1
1278 /* Return BG_ERR_TGT if error injection is detected by Target */
1279 #define BG_ERR_TGT      0x2
1280 /* Return BG_ERR_SWAP if swapping CSUM<-->CRC is required for error injection */
1281 #define BG_ERR_SWAP     0x10
1282 /**
1283  * Return BG_ERR_CHECK if disabling Guard/Ref/App checking is required for
1284  * error injection
1285  **/
1286 #define BG_ERR_CHECK    0x20
1287
1288 /**
1289  * lpfc_bg_err_inject - Determine if we should inject an error
1290  * @phba: The Hba for which this call is being executed.
1291  * @sc: The SCSI command to examine
1292  * @reftag: (out) BlockGuard reference tag for transmitted data
1293  * @apptag: (out) BlockGuard application tag for transmitted data
1294  * @new_guard (in) Value to replace CRC with if needed
1295  *
1296  * Returns BG_ERR_* bit mask or 0 if request ignored
1297  **/
1298 static int
1299 lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1300                 uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
1301 {
1302         struct scatterlist *sgpe; /* s/g prot entry */
1303         struct lpfc_scsi_buf *lpfc_cmd = NULL;
1304         struct scsi_dif_tuple *src = NULL;
1305         struct lpfc_nodelist *ndlp;
1306         struct lpfc_rport_data *rdata;
1307         uint32_t op = scsi_get_prot_op(sc);
1308         uint32_t blksize;
1309         uint32_t numblks;
1310         sector_t lba;
1311         int rc = 0;
1312         int blockoff = 0;
1313
1314         if (op == SCSI_PROT_NORMAL)
1315                 return 0;
1316
1317         sgpe = scsi_prot_sglist(sc);
1318         lba = scsi_get_lba(sc);
1319
1320         /* First check if we need to match the LBA */
1321         if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
1322                 blksize = lpfc_cmd_blksize(sc);
1323                 numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
1324
1325                 /* Make sure we have the right LBA if one is specified */
1326                 if ((phba->lpfc_injerr_lba < lba) ||
1327                         (phba->lpfc_injerr_lba >= (lba + numblks)))
1328                         return 0;
1329                 if (sgpe) {
1330                         blockoff = phba->lpfc_injerr_lba - lba;
1331                         numblks = sg_dma_len(sgpe) /
1332                                 sizeof(struct scsi_dif_tuple);
1333                         if (numblks < blockoff)
1334                                 blockoff = numblks;
1335                 }
1336         }
1337
1338         /* Next check if we need to match the remote NPortID or WWPN */
1339         rdata = lpfc_rport_data_from_scsi_device(sc->device);
1340         if (rdata && rdata->pnode) {
1341                 ndlp = rdata->pnode;
1342
1343                 /* Make sure we have the right NPortID if one is specified */
1344                 if (phba->lpfc_injerr_nportid  &&
1345                         (phba->lpfc_injerr_nportid != ndlp->nlp_DID))
1346                         return 0;
1347
1348                 /*
1349                  * Make sure we have the right WWPN if one is specified.
1350                  * wwn[0] should be a non-zero NAA in a good WWPN.
1351                  */
1352                 if (phba->lpfc_injerr_wwpn.u.wwn[0]  &&
1353                         (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
1354                                 sizeof(struct lpfc_name)) != 0))
1355                         return 0;
1356         }
1357
1358         /* Setup a ptr to the protection data if the SCSI host provides it */
1359         if (sgpe) {
1360                 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
1361                 src += blockoff;
1362                 lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
1363         }
1364
1365         /* Should we change the Reference Tag */
1366         if (reftag) {
1367                 if (phba->lpfc_injerr_wref_cnt) {
1368                         switch (op) {
1369                         case SCSI_PROT_WRITE_PASS:
1370                                 if (src) {
1371                                         /*
1372                                          * For WRITE_PASS, force the error
1373                                          * to be sent on the wire. It should
1374                                          * be detected by the Target.
1375                                          * If blockoff != 0 error will be
1376                                          * inserted in middle of the IO.
1377                                          */
1378
1379                                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1380                                         "9076 BLKGRD: Injecting reftag error: "
1381                                         "write lba x%lx + x%x oldrefTag x%x\n",
1382                                         (unsigned long)lba, blockoff,
1383                                         be32_to_cpu(src->ref_tag));
1384
1385                                         /*
1386                                          * Save the old ref_tag so we can
1387                                          * restore it on completion.
1388                                          */
1389                                         if (lpfc_cmd) {
1390                                                 lpfc_cmd->prot_data_type =
1391                                                         LPFC_INJERR_REFTAG;
1392                                                 lpfc_cmd->prot_data_segment =
1393                                                         src;
1394                                                 lpfc_cmd->prot_data =
1395                                                         src->ref_tag;
1396                                         }
1397                                         src->ref_tag = cpu_to_be32(0xDEADBEEF);
1398                                         phba->lpfc_injerr_wref_cnt--;
1399                                         if (phba->lpfc_injerr_wref_cnt == 0) {
1400                                                 phba->lpfc_injerr_nportid = 0;
1401                                                 phba->lpfc_injerr_lba =
1402                                                         LPFC_INJERR_LBA_OFF;
1403                                                 memset(&phba->lpfc_injerr_wwpn,
1404                                                   0, sizeof(struct lpfc_name));
1405                                         }
1406                                         rc = BG_ERR_TGT | BG_ERR_CHECK;
1407
1408                                         break;
1409                                 }
1410                                 /* Drop thru */
1411                         case SCSI_PROT_WRITE_INSERT:
1412                                 /*
1413                                  * For WRITE_INSERT, force the error
1414                                  * to be sent on the wire. It should be
1415                                  * detected by the Target.
1416                                  */
1417                                 /* DEADBEEF will be the reftag on the wire */
1418                                 *reftag = 0xDEADBEEF;
1419                                 phba->lpfc_injerr_wref_cnt--;
1420                                 if (phba->lpfc_injerr_wref_cnt == 0) {
1421                                         phba->lpfc_injerr_nportid = 0;
1422                                         phba->lpfc_injerr_lba =
1423                                         LPFC_INJERR_LBA_OFF;
1424                                         memset(&phba->lpfc_injerr_wwpn,
1425                                                 0, sizeof(struct lpfc_name));
1426                                 }
1427                                 rc = BG_ERR_TGT | BG_ERR_CHECK;
1428
1429                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1430                                         "9078 BLKGRD: Injecting reftag error: "
1431                                         "write lba x%lx\n", (unsigned long)lba);
1432                                 break;
1433                         case SCSI_PROT_WRITE_STRIP:
1434                                 /*
1435                                  * For WRITE_STRIP and WRITE_PASS,
1436                                  * force the error on data
1437                                  * being copied from SLI-Host to SLI-Port.
1438                                  */
1439                                 *reftag = 0xDEADBEEF;
1440                                 phba->lpfc_injerr_wref_cnt--;
1441                                 if (phba->lpfc_injerr_wref_cnt == 0) {
1442                                         phba->lpfc_injerr_nportid = 0;
1443                                         phba->lpfc_injerr_lba =
1444                                                 LPFC_INJERR_LBA_OFF;
1445                                         memset(&phba->lpfc_injerr_wwpn,
1446                                                 0, sizeof(struct lpfc_name));
1447                                 }
1448                                 rc = BG_ERR_INIT;
1449
1450                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1451                                         "9077 BLKGRD: Injecting reftag error: "
1452                                         "write lba x%lx\n", (unsigned long)lba);
1453                                 break;
1454                         }
1455                 }
1456                 if (phba->lpfc_injerr_rref_cnt) {
1457                         switch (op) {
1458                         case SCSI_PROT_READ_INSERT:
1459                         case SCSI_PROT_READ_STRIP:
1460                         case SCSI_PROT_READ_PASS:
1461                                 /*
1462                                  * For READ_STRIP and READ_PASS, force the
1463                                  * error on data being read off the wire. It
1464                                  * should force an IO error to the driver.
1465                                  */
1466                                 *reftag = 0xDEADBEEF;
1467                                 phba->lpfc_injerr_rref_cnt--;
1468                                 if (phba->lpfc_injerr_rref_cnt == 0) {
1469                                         phba->lpfc_injerr_nportid = 0;
1470                                         phba->lpfc_injerr_lba =
1471                                                 LPFC_INJERR_LBA_OFF;
1472                                         memset(&phba->lpfc_injerr_wwpn,
1473                                                 0, sizeof(struct lpfc_name));
1474                                 }
1475                                 rc = BG_ERR_INIT;
1476
1477                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1478                                         "9079 BLKGRD: Injecting reftag error: "
1479                                         "read lba x%lx\n", (unsigned long)lba);
1480                                 break;
1481                         }
1482                 }
1483         }
1484
1485         /* Should we change the Application Tag */
1486         if (apptag) {
1487                 if (phba->lpfc_injerr_wapp_cnt) {
1488                         switch (op) {
1489                         case SCSI_PROT_WRITE_PASS:
1490                                 if (src) {
1491                                         /*
1492                                          * For WRITE_PASS, force the error
1493                                          * to be sent on the wire. It should
1494                                          * be detected by the Target.
1495                                          * If blockoff != 0 error will be
1496                                          * inserted in middle of the IO.
1497                                          */
1498
1499                                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1500                                         "9080 BLKGRD: Injecting apptag error: "
1501                                         "write lba x%lx + x%x oldappTag x%x\n",
1502                                         (unsigned long)lba, blockoff,
1503                                         be16_to_cpu(src->app_tag));
1504
1505                                         /*
1506                                          * Save the old app_tag so we can
1507                                          * restore it on completion.
1508                                          */
1509                                         if (lpfc_cmd) {
1510                                                 lpfc_cmd->prot_data_type =
1511                                                         LPFC_INJERR_APPTAG;
1512                                                 lpfc_cmd->prot_data_segment =
1513                                                         src;
1514                                                 lpfc_cmd->prot_data =
1515                                                         src->app_tag;
1516                                         }
1517                                         src->app_tag = cpu_to_be16(0xDEAD);
1518                                         phba->lpfc_injerr_wapp_cnt--;
1519                                         if (phba->lpfc_injerr_wapp_cnt == 0) {
1520                                                 phba->lpfc_injerr_nportid = 0;
1521                                                 phba->lpfc_injerr_lba =
1522                                                         LPFC_INJERR_LBA_OFF;
1523                                                 memset(&phba->lpfc_injerr_wwpn,
1524                                                   0, sizeof(struct lpfc_name));
1525                                         }
1526                                         rc = BG_ERR_TGT | BG_ERR_CHECK;
1527                                         break;
1528                                 }
1529                                 /* Drop thru */
1530                         case SCSI_PROT_WRITE_INSERT:
1531                                 /*
1532                                  * For WRITE_INSERT, force the
1533                                  * error to be sent on the wire. It should be
1534                                  * detected by the Target.
1535                                  */
1536                                 /* DEAD will be the apptag on the wire */
1537                                 *apptag = 0xDEAD;
1538                                 phba->lpfc_injerr_wapp_cnt--;
1539                                 if (phba->lpfc_injerr_wapp_cnt == 0) {
1540                                         phba->lpfc_injerr_nportid = 0;
1541                                         phba->lpfc_injerr_lba =
1542                                                 LPFC_INJERR_LBA_OFF;
1543                                         memset(&phba->lpfc_injerr_wwpn,
1544                                                 0, sizeof(struct lpfc_name));
1545                                 }
1546                                 rc = BG_ERR_TGT | BG_ERR_CHECK;
1547
1548                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1549                                         "0813 BLKGRD: Injecting apptag error: "
1550                                         "write lba x%lx\n", (unsigned long)lba);
1551                                 break;
1552                         case SCSI_PROT_WRITE_STRIP:
1553                                 /*
1554                                  * For WRITE_STRIP and WRITE_PASS,
1555                                  * force the error on data
1556                                  * being copied from SLI-Host to SLI-Port.
1557                                  */
1558                                 *apptag = 0xDEAD;
1559                                 phba->lpfc_injerr_wapp_cnt--;
1560                                 if (phba->lpfc_injerr_wapp_cnt == 0) {
1561                                         phba->lpfc_injerr_nportid = 0;
1562                                         phba->lpfc_injerr_lba =
1563                                                 LPFC_INJERR_LBA_OFF;
1564                                         memset(&phba->lpfc_injerr_wwpn,
1565                                                 0, sizeof(struct lpfc_name));
1566                                 }
1567                                 rc = BG_ERR_INIT;
1568
1569                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1570                                         "0812 BLKGRD: Injecting apptag error: "
1571                                         "write lba x%lx\n", (unsigned long)lba);
1572                                 break;
1573                         }
1574                 }
1575                 if (phba->lpfc_injerr_rapp_cnt) {
1576                         switch (op) {
1577                         case SCSI_PROT_READ_INSERT:
1578                         case SCSI_PROT_READ_STRIP:
1579                         case SCSI_PROT_READ_PASS:
1580                                 /*
1581                                  * For READ_STRIP and READ_PASS, force the
1582                                  * error on data being read off the wire. It
1583                                  * should force an IO error to the driver.
1584                                  */
1585                                 *apptag = 0xDEAD;
1586                                 phba->lpfc_injerr_rapp_cnt--;
1587                                 if (phba->lpfc_injerr_rapp_cnt == 0) {
1588                                         phba->lpfc_injerr_nportid = 0;
1589                                         phba->lpfc_injerr_lba =
1590                                                 LPFC_INJERR_LBA_OFF;
1591                                         memset(&phba->lpfc_injerr_wwpn,
1592                                                 0, sizeof(struct lpfc_name));
1593                                 }
1594                                 rc = BG_ERR_INIT;
1595
1596                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1597                                         "0814 BLKGRD: Injecting apptag error: "
1598                                         "read lba x%lx\n", (unsigned long)lba);
1599                                 break;
1600                         }
1601                 }
1602         }
1603
1604
1605         /* Should we change the Guard Tag */
1606         if (new_guard) {
1607                 if (phba->lpfc_injerr_wgrd_cnt) {
1608                         switch (op) {
1609                         case SCSI_PROT_WRITE_PASS:
1610                                 rc = BG_ERR_CHECK;
1611                                 /* Drop thru */
1612
1613                         case SCSI_PROT_WRITE_INSERT:
1614                                 /*
1615                                  * For WRITE_INSERT, force the
1616                                  * error to be sent on the wire. It should be
1617                                  * detected by the Target.
1618                                  */
1619                                 phba->lpfc_injerr_wgrd_cnt--;
1620                                 if (phba->lpfc_injerr_wgrd_cnt == 0) {
1621                                         phba->lpfc_injerr_nportid = 0;
1622                                         phba->lpfc_injerr_lba =
1623                                                 LPFC_INJERR_LBA_OFF;
1624                                         memset(&phba->lpfc_injerr_wwpn,
1625                                                 0, sizeof(struct lpfc_name));
1626                                 }
1627
1628                                 rc |= BG_ERR_TGT | BG_ERR_SWAP;
1629                                 /* Signals the caller to swap CRC->CSUM */
1630
1631                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1632                                         "0817 BLKGRD: Injecting guard error: "
1633                                         "write lba x%lx\n", (unsigned long)lba);
1634                                 break;
1635                         case SCSI_PROT_WRITE_STRIP:
1636                                 /*
1637                                  * For WRITE_STRIP and WRITE_PASS,
1638                                  * force the error on data
1639                                  * being copied from SLI-Host to SLI-Port.
1640                                  */
1641                                 phba->lpfc_injerr_wgrd_cnt--;
1642                                 if (phba->lpfc_injerr_wgrd_cnt == 0) {
1643                                         phba->lpfc_injerr_nportid = 0;
1644                                         phba->lpfc_injerr_lba =
1645                                                 LPFC_INJERR_LBA_OFF;
1646                                         memset(&phba->lpfc_injerr_wwpn,
1647                                                 0, sizeof(struct lpfc_name));
1648                                 }
1649
1650                                 rc = BG_ERR_INIT | BG_ERR_SWAP;
1651                                 /* Signals the caller to swap CRC->CSUM */
1652
1653                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1654                                         "0816 BLKGRD: Injecting guard error: "
1655                                         "write lba x%lx\n", (unsigned long)lba);
1656                                 break;
1657                         }
1658                 }
1659                 if (phba->lpfc_injerr_rgrd_cnt) {
1660                         switch (op) {
1661                         case SCSI_PROT_READ_INSERT:
1662                         case SCSI_PROT_READ_STRIP:
1663                         case SCSI_PROT_READ_PASS:
1664                                 /*
1665                                  * For READ_STRIP and READ_PASS, force the
1666                                  * error on data being read off the wire. It
1667                                  * should force an IO error to the driver.
1668                                  */
1669                                 phba->lpfc_injerr_rgrd_cnt--;
1670                                 if (phba->lpfc_injerr_rgrd_cnt == 0) {
1671                                         phba->lpfc_injerr_nportid = 0;
1672                                         phba->lpfc_injerr_lba =
1673                                                 LPFC_INJERR_LBA_OFF;
1674                                         memset(&phba->lpfc_injerr_wwpn,
1675                                                 0, sizeof(struct lpfc_name));
1676                                 }
1677
1678                                 rc = BG_ERR_INIT | BG_ERR_SWAP;
1679                                 /* Signals the caller to swap CRC->CSUM */
1680
1681                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1682                                         "0818 BLKGRD: Injecting guard error: "
1683                                         "read lba x%lx\n", (unsigned long)lba);
1684                         }
1685                 }
1686         }
1687
1688         return rc;
1689 }
1690 #endif
1691
1692 /**
1693  * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
1694  * the specified SCSI command.
1695  * @phba: The Hba for which this call is being executed.
1696  * @sc: The SCSI command to examine
1697  * @txopt: (out) BlockGuard operation for transmitted data
1698  * @rxopt: (out) BlockGuard operation for received data
1699  *
1700  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
1701  *
1702  **/
1703 static int
1704 lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1705                 uint8_t *txop, uint8_t *rxop)
1706 {
1707         uint8_t ret = 0;
1708
1709         if (lpfc_cmd_guard_csum(sc)) {
1710                 switch (scsi_get_prot_op(sc)) {
1711                 case SCSI_PROT_READ_INSERT:
1712                 case SCSI_PROT_WRITE_STRIP:
1713                         *rxop = BG_OP_IN_NODIF_OUT_CSUM;
1714                         *txop = BG_OP_IN_CSUM_OUT_NODIF;
1715                         break;
1716
1717                 case SCSI_PROT_READ_STRIP:
1718                 case SCSI_PROT_WRITE_INSERT:
1719                         *rxop = BG_OP_IN_CRC_OUT_NODIF;
1720                         *txop = BG_OP_IN_NODIF_OUT_CRC;
1721                         break;
1722
1723                 case SCSI_PROT_READ_PASS:
1724                 case SCSI_PROT_WRITE_PASS:
1725                         *rxop = BG_OP_IN_CRC_OUT_CSUM;
1726                         *txop = BG_OP_IN_CSUM_OUT_CRC;
1727                         break;
1728
1729                 case SCSI_PROT_NORMAL:
1730                 default:
1731                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1732                                 "9063 BLKGRD: Bad op/guard:%d/IP combination\n",
1733                                         scsi_get_prot_op(sc));
1734                         ret = 1;
1735                         break;
1736
1737                 }
1738         } else {
1739                 switch (scsi_get_prot_op(sc)) {
1740                 case SCSI_PROT_READ_STRIP:
1741                 case SCSI_PROT_WRITE_INSERT:
1742                         *rxop = BG_OP_IN_CRC_OUT_NODIF;
1743                         *txop = BG_OP_IN_NODIF_OUT_CRC;
1744                         break;
1745
1746                 case SCSI_PROT_READ_PASS:
1747                 case SCSI_PROT_WRITE_PASS:
1748                         *rxop = BG_OP_IN_CRC_OUT_CRC;
1749                         *txop = BG_OP_IN_CRC_OUT_CRC;
1750                         break;
1751
1752                 case SCSI_PROT_READ_INSERT:
1753                 case SCSI_PROT_WRITE_STRIP:
1754                         *rxop = BG_OP_IN_NODIF_OUT_CRC;
1755                         *txop = BG_OP_IN_CRC_OUT_NODIF;
1756                         break;
1757
1758                 case SCSI_PROT_NORMAL:
1759                 default:
1760                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1761                                 "9075 BLKGRD: Bad op/guard:%d/CRC combination\n",
1762                                         scsi_get_prot_op(sc));
1763                         ret = 1;
1764                         break;
1765                 }
1766         }
1767
1768         return ret;
1769 }
1770
1771 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1772 /**
1773  * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
1774  * the specified SCSI command in order to force a guard tag error.
1775  * @phba: The Hba for which this call is being executed.
1776  * @sc: The SCSI command to examine
1777  * @txopt: (out) BlockGuard operation for transmitted data
1778  * @rxopt: (out) BlockGuard operation for received data
1779  *
1780  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
1781  *
1782  **/
1783 static int
1784 lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1785                 uint8_t *txop, uint8_t *rxop)
1786 {
1787         uint8_t ret = 0;
1788
1789         if (lpfc_cmd_guard_csum(sc)) {
1790                 switch (scsi_get_prot_op(sc)) {
1791                 case SCSI_PROT_READ_INSERT:
1792                 case SCSI_PROT_WRITE_STRIP:
1793                         *rxop = BG_OP_IN_NODIF_OUT_CRC;
1794                         *txop = BG_OP_IN_CRC_OUT_NODIF;
1795                         break;
1796
1797                 case SCSI_PROT_READ_STRIP:
1798                 case SCSI_PROT_WRITE_INSERT:
1799                         *rxop = BG_OP_IN_CSUM_OUT_NODIF;
1800                         *txop = BG_OP_IN_NODIF_OUT_CSUM;
1801                         break;
1802
1803                 case SCSI_PROT_READ_PASS:
1804                 case SCSI_PROT_WRITE_PASS:
1805                         *rxop = BG_OP_IN_CSUM_OUT_CRC;
1806                         *txop = BG_OP_IN_CRC_OUT_CSUM;
1807                         break;
1808
1809                 case SCSI_PROT_NORMAL:
1810                 default:
1811                         break;
1812
1813                 }
1814         } else {
1815                 switch (scsi_get_prot_op(sc)) {
1816                 case SCSI_PROT_READ_STRIP:
1817                 case SCSI_PROT_WRITE_INSERT:
1818                         *rxop = BG_OP_IN_CSUM_OUT_NODIF;
1819                         *txop = BG_OP_IN_NODIF_OUT_CSUM;
1820                         break;
1821
1822                 case SCSI_PROT_READ_PASS:
1823                 case SCSI_PROT_WRITE_PASS:
1824                         *rxop = BG_OP_IN_CSUM_OUT_CSUM;
1825                         *txop = BG_OP_IN_CSUM_OUT_CSUM;
1826                         break;
1827
1828                 case SCSI_PROT_READ_INSERT:
1829                 case SCSI_PROT_WRITE_STRIP:
1830                         *rxop = BG_OP_IN_NODIF_OUT_CSUM;
1831                         *txop = BG_OP_IN_CSUM_OUT_NODIF;
1832                         break;
1833
1834                 case SCSI_PROT_NORMAL:
1835                 default:
1836                         break;
1837                 }
1838         }
1839
1840         return ret;
1841 }
1842 #endif
1843
1844 /**
1845  * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
1846  * @phba: The Hba for which this call is being executed.
1847  * @sc: pointer to scsi command we're working on
1848  * @bpl: pointer to buffer list for protection groups
1849  * @datacnt: number of segments of data that have been dma mapped
1850  *
1851  * This function sets up BPL buffer list for protection groups of
1852  * type LPFC_PG_TYPE_NO_DIF
1853  *
1854  * This is usually used when the HBA is instructed to generate
1855  * DIFs and insert them into data stream (or strip DIF from
1856  * incoming data stream)
1857  *
1858  * The buffer list consists of just one protection group described
1859  * below:
1860  *                                +-------------------------+
1861  *   start of prot group  -->     |          PDE_5          |
1862  *                                +-------------------------+
1863  *                                |          PDE_6          |
1864  *                                +-------------------------+
1865  *                                |         Data BDE        |
1866  *                                +-------------------------+
1867  *                                |more Data BDE's ... (opt)|
1868  *                                +-------------------------+
1869  *
1870  *
1871  * Note: Data s/g buffers have been dma mapped
1872  *
1873  * Returns the number of BDEs added to the BPL.
1874  **/
1875 static int
1876 lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
1877                 struct ulp_bde64 *bpl, int datasegcnt)
1878 {
1879         struct scatterlist *sgde = NULL; /* s/g data entry */
1880         struct lpfc_pde5 *pde5 = NULL;
1881         struct lpfc_pde6 *pde6 = NULL;
1882         dma_addr_t physaddr;
1883         int i = 0, num_bde = 0, status;
1884         int datadir = sc->sc_data_direction;
1885 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1886         uint32_t rc;
1887 #endif
1888         uint32_t checking = 1;
1889         uint32_t reftag;
1890         uint8_t txop, rxop;
1891
1892         status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
1893         if (status)
1894                 goto out;
1895
1896         /* extract some info from the scsi command for pde*/
1897         reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
1898
1899 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1900         rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
1901         if (rc) {
1902                 if (rc & BG_ERR_SWAP)
1903                         lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
1904                 if (rc & BG_ERR_CHECK)
1905                         checking = 0;
1906         }
1907 #endif
1908
1909         /* setup PDE5 with what we have */
1910         pde5 = (struct lpfc_pde5 *) bpl;
1911         memset(pde5, 0, sizeof(struct lpfc_pde5));
1912         bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
1913
1914         /* Endianness conversion if necessary for PDE5 */
1915         pde5->word0 = cpu_to_le32(pde5->word0);
1916         pde5->reftag = cpu_to_le32(reftag);
1917
1918         /* advance bpl and increment bde count */
1919         num_bde++;
1920         bpl++;
1921         pde6 = (struct lpfc_pde6 *) bpl;
1922
1923         /* setup PDE6 with the rest of the info */
1924         memset(pde6, 0, sizeof(struct lpfc_pde6));
1925         bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
1926         bf_set(pde6_optx, pde6, txop);
1927         bf_set(pde6_oprx, pde6, rxop);
1928
1929         /*
1930          * We only need to check the data on READs, for WRITEs
1931          * protection data is automatically generated, not checked.
1932          */
1933         if (datadir == DMA_FROM_DEVICE) {
1934                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
1935                         bf_set(pde6_ce, pde6, checking);
1936                 else
1937                         bf_set(pde6_ce, pde6, 0);
1938
1939                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
1940                         bf_set(pde6_re, pde6, checking);
1941                 else
1942                         bf_set(pde6_re, pde6, 0);
1943         }
1944         bf_set(pde6_ai, pde6, 1);
1945         bf_set(pde6_ae, pde6, 0);
1946         bf_set(pde6_apptagval, pde6, 0);
1947
1948         /* Endianness conversion if necessary for PDE6 */
1949         pde6->word0 = cpu_to_le32(pde6->word0);
1950         pde6->word1 = cpu_to_le32(pde6->word1);
1951         pde6->word2 = cpu_to_le32(pde6->word2);
1952
1953         /* advance bpl and increment bde count */
1954         num_bde++;
1955         bpl++;
1956
1957         /* assumption: caller has already run dma_map_sg on command data */
1958         scsi_for_each_sg(sc, sgde, datasegcnt, i) {
1959                 physaddr = sg_dma_address(sgde);
1960                 bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
1961                 bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
1962                 bpl->tus.f.bdeSize = sg_dma_len(sgde);
1963                 if (datadir == DMA_TO_DEVICE)
1964                         bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
1965                 else
1966                         bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
1967                 bpl->tus.w = le32_to_cpu(bpl->tus.w);
1968                 bpl++;
1969                 num_bde++;
1970         }
1971
1972 out:
1973         return num_bde;
1974 }
1975
1976 /**
1977  * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
1978  * @phba: The Hba for which this call is being executed.
1979  * @sc: pointer to scsi command we're working on
1980  * @bpl: pointer to buffer list for protection groups
1981  * @datacnt: number of segments of data that have been dma mapped
1982  * @protcnt: number of segment of protection data that have been dma mapped
1983  *
1984  * This function sets up BPL buffer list for protection groups of
1985  * type LPFC_PG_TYPE_DIF
1986  *
1987  * This is usually used when DIFs are in their own buffers,
1988  * separate from the data. The HBA can then by instructed
1989  * to place the DIFs in the outgoing stream.  For read operations,
1990  * The HBA could extract the DIFs and place it in DIF buffers.
1991  *
1992  * The buffer list for this type consists of one or more of the
1993  * protection groups described below:
1994  *                                    +-------------------------+
1995  *   start of first prot group  -->   |          PDE_5          |
1996  *                                    +-------------------------+
1997  *                                    |          PDE_6          |
1998  *                                    +-------------------------+
1999  *                                    |      PDE_7 (Prot BDE)   |
2000  *                                    +-------------------------+
2001  *                                    |        Data BDE         |
2002  *                                    +-------------------------+
2003  *                                    |more Data BDE's ... (opt)|
2004  *                                    +-------------------------+
2005  *   start of new  prot group  -->    |          PDE_5          |
2006  *                                    +-------------------------+
2007  *                                    |          ...            |
2008  *                                    +-------------------------+
2009  *
2010  * Note: It is assumed that both data and protection s/g buffers have been
2011  *       mapped for DMA
2012  *
2013  * Returns the number of BDEs added to the BPL.
2014  **/
2015 static int
2016 lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2017                 struct ulp_bde64 *bpl, int datacnt, int protcnt)
2018 {
2019         struct scatterlist *sgde = NULL; /* s/g data entry */
2020         struct scatterlist *sgpe = NULL; /* s/g prot entry */
2021         struct lpfc_pde5 *pde5 = NULL;
2022         struct lpfc_pde6 *pde6 = NULL;
2023         struct lpfc_pde7 *pde7 = NULL;
2024         dma_addr_t dataphysaddr, protphysaddr;
2025         unsigned short curr_data = 0, curr_prot = 0;
2026         unsigned int split_offset;
2027         unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
2028         unsigned int protgrp_blks, protgrp_bytes;
2029         unsigned int remainder, subtotal;
2030         int status;
2031         int datadir = sc->sc_data_direction;
2032         unsigned char pgdone = 0, alldone = 0;
2033         unsigned blksize;
2034 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2035         uint32_t rc;
2036 #endif
2037         uint32_t checking = 1;
2038         uint32_t reftag;
2039         uint8_t txop, rxop;
2040         int num_bde = 0;
2041
2042         sgpe = scsi_prot_sglist(sc);
2043         sgde = scsi_sglist(sc);
2044
2045         if (!sgpe || !sgde) {
2046                 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2047                                 "9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
2048                                 sgpe, sgde);
2049                 return 0;
2050         }
2051
2052         status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2053         if (status)
2054                 goto out;
2055
2056         /* extract some info from the scsi command */
2057         blksize = lpfc_cmd_blksize(sc);
2058         reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2059
2060 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2061         rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2062         if (rc) {
2063                 if (rc & BG_ERR_SWAP)
2064                         lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2065                 if (rc & BG_ERR_CHECK)
2066                         checking = 0;
2067         }
2068 #endif
2069
2070         split_offset = 0;
2071         do {
2072                 /* Check to see if we ran out of space */
2073                 if (num_bde >= (phba->cfg_total_seg_cnt - 2))
2074                         return num_bde + 3;
2075
2076                 /* setup PDE5 with what we have */
2077                 pde5 = (struct lpfc_pde5 *) bpl;
2078                 memset(pde5, 0, sizeof(struct lpfc_pde5));
2079                 bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
2080
2081                 /* Endianness conversion if necessary for PDE5 */
2082                 pde5->word0 = cpu_to_le32(pde5->word0);
2083                 pde5->reftag = cpu_to_le32(reftag);
2084
2085                 /* advance bpl and increment bde count */
2086                 num_bde++;
2087                 bpl++;
2088                 pde6 = (struct lpfc_pde6 *) bpl;
2089
2090                 /* setup PDE6 with the rest of the info */
2091                 memset(pde6, 0, sizeof(struct lpfc_pde6));
2092                 bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
2093                 bf_set(pde6_optx, pde6, txop);
2094                 bf_set(pde6_oprx, pde6, rxop);
2095
2096                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2097                         bf_set(pde6_ce, pde6, checking);
2098                 else
2099                         bf_set(pde6_ce, pde6, 0);
2100
2101                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2102                         bf_set(pde6_re, pde6, checking);
2103                 else
2104                         bf_set(pde6_re, pde6, 0);
2105
2106                 bf_set(pde6_ai, pde6, 1);
2107                 bf_set(pde6_ae, pde6, 0);
2108                 bf_set(pde6_apptagval, pde6, 0);
2109
2110                 /* Endianness conversion if necessary for PDE6 */
2111                 pde6->word0 = cpu_to_le32(pde6->word0);
2112                 pde6->word1 = cpu_to_le32(pde6->word1);
2113                 pde6->word2 = cpu_to_le32(pde6->word2);
2114
2115                 /* advance bpl and increment bde count */
2116                 num_bde++;
2117                 bpl++;
2118
2119                 /* setup the first BDE that points to protection buffer */
2120                 protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
2121                 protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
2122
2123                 /* must be integer multiple of the DIF block length */
2124                 BUG_ON(protgroup_len % 8);
2125
2126                 pde7 = (struct lpfc_pde7 *) bpl;
2127                 memset(pde7, 0, sizeof(struct lpfc_pde7));
2128                 bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR);
2129
2130                 pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
2131                 pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
2132
2133                 protgrp_blks = protgroup_len / 8;
2134                 protgrp_bytes = protgrp_blks * blksize;
2135
2136                 /* check if this pde is crossing the 4K boundary; if so split */
2137                 if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) {
2138                         protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff);
2139                         protgroup_offset += protgroup_remainder;
2140                         protgrp_blks = protgroup_remainder / 8;
2141                         protgrp_bytes = protgrp_blks * blksize;
2142                 } else {
2143                         protgroup_offset = 0;
2144                         curr_prot++;
2145                 }
2146
2147                 num_bde++;
2148
2149                 /* setup BDE's for data blocks associated with DIF data */
2150                 pgdone = 0;
2151                 subtotal = 0; /* total bytes processed for current prot grp */
2152                 while (!pgdone) {
2153                         /* Check to see if we ran out of space */
2154                         if (num_bde >= phba->cfg_total_seg_cnt)
2155                                 return num_bde + 1;
2156
2157                         if (!sgde) {
2158                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2159                                         "9065 BLKGRD:%s Invalid data segment\n",
2160                                                 __func__);
2161                                 return 0;
2162                         }
2163                         bpl++;
2164                         dataphysaddr = sg_dma_address(sgde) + split_offset;
2165                         bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
2166                         bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));
2167
2168                         remainder = sg_dma_len(sgde) - split_offset;
2169
2170                         if ((subtotal + remainder) <= protgrp_bytes) {
2171                                 /* we can use this whole buffer */
2172                                 bpl->tus.f.bdeSize = remainder;
2173                                 split_offset = 0;
2174
2175                                 if ((subtotal + remainder) == protgrp_bytes)
2176                                         pgdone = 1;
2177                         } else {
2178                                 /* must split this buffer with next prot grp */
2179                                 bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
2180                                 split_offset += bpl->tus.f.bdeSize;
2181                         }
2182
2183                         subtotal += bpl->tus.f.bdeSize;
2184
2185                         if (datadir == DMA_TO_DEVICE)
2186                                 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
2187                         else
2188                                 bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
2189                         bpl->tus.w = le32_to_cpu(bpl->tus.w);
2190
2191                         num_bde++;
2192                         curr_data++;
2193
2194                         if (split_offset)
2195                                 break;
2196
2197                         /* Move to the next s/g segment if possible */
2198                         sgde = sg_next(sgde);
2199
2200                 }
2201
2202                 if (protgroup_offset) {
2203                         /* update the reference tag */
2204                         reftag += protgrp_blks;
2205                         bpl++;
2206                         continue;
2207                 }
2208
2209                 /* are we done ? */
2210                 if (curr_prot == protcnt) {
2211                         alldone = 1;
2212                 } else if (curr_prot < protcnt) {
2213                         /* advance to next prot buffer */
2214                         sgpe = sg_next(sgpe);
2215                         bpl++;
2216
2217                         /* update the reference tag */
2218                         reftag += protgrp_blks;
2219                 } else {
2220                         /* if we're here, we have a bug */
2221                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2222                                 "9054 BLKGRD: bug in %s\n", __func__);
2223                 }
2224
2225         } while (!alldone);
2226 out:
2227
2228         return num_bde;
2229 }
2230
2231 /**
2232  * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
2233  * @phba: The Hba for which this call is being executed.
2234  * @sc: pointer to scsi command we're working on
2235  * @sgl: pointer to buffer list for protection groups
2236  * @datacnt: number of segments of data that have been dma mapped
2237  *
2238  * This function sets up SGL buffer list for protection groups of
2239  * type LPFC_PG_TYPE_NO_DIF
2240  *
2241  * This is usually used when the HBA is instructed to generate
2242  * DIFs and insert them into data stream (or strip DIF from
2243  * incoming data stream)
2244  *
2245  * The buffer list consists of just one protection group described
2246  * below:
2247  *                                +-------------------------+
2248  *   start of prot group  -->     |         DI_SEED         |
2249  *                                +-------------------------+
2250  *                                |         Data SGE        |
2251  *                                +-------------------------+
2252  *                                |more Data SGE's ... (opt)|
2253  *                                +-------------------------+
2254  *
2255  *
2256  * Note: Data s/g buffers have been dma mapped
2257  *
2258  * Returns the number of SGEs added to the SGL.
2259  **/
2260 static int
2261 lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2262                 struct sli4_sge *sgl, int datasegcnt)
2263 {
2264         struct scatterlist *sgde = NULL; /* s/g data entry */
2265         struct sli4_sge_diseed *diseed = NULL;
2266         dma_addr_t physaddr;
2267         int i = 0, num_sge = 0, status;
2268         uint32_t reftag;
2269         uint8_t txop, rxop;
2270 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2271         uint32_t rc;
2272 #endif
2273         uint32_t checking = 1;
2274         uint32_t dma_len;
2275         uint32_t dma_offset = 0;
2276
2277         status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2278         if (status)
2279                 goto out;
2280
2281         /* extract some info from the scsi command for pde*/
2282         reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2283
2284 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2285         rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2286         if (rc) {
2287                 if (rc & BG_ERR_SWAP)
2288                         lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2289                 if (rc & BG_ERR_CHECK)
2290                         checking = 0;
2291         }
2292 #endif
2293
2294         /* setup DISEED with what we have */
2295         diseed = (struct sli4_sge_diseed *) sgl;
2296         memset(diseed, 0, sizeof(struct sli4_sge_diseed));
2297         bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
2298
2299         /* Endianness conversion if necessary */
2300         diseed->ref_tag = cpu_to_le32(reftag);
2301         diseed->ref_tag_tran = diseed->ref_tag;
2302
2303         /*
2304          * We only need to check the data on READs, for WRITEs
2305          * protection data is automatically generated, not checked.
2306          */
2307         if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2308                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2309                         bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
2310                 else
2311                         bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
2312
2313                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2314                         bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
2315                 else
2316                         bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
2317         }
2318
2319         /* setup DISEED with the rest of the info */
2320         bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
2321         bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2322
2323         bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
2324         bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
2325
2326         /* Endianness conversion if necessary for DISEED */
2327         diseed->word2 = cpu_to_le32(diseed->word2);
2328         diseed->word3 = cpu_to_le32(diseed->word3);
2329
2330         /* advance bpl and increment sge count */
2331         num_sge++;
2332         sgl++;
2333
2334         /* assumption: caller has already run dma_map_sg on command data */
2335         scsi_for_each_sg(sc, sgde, datasegcnt, i) {
2336                 physaddr = sg_dma_address(sgde);
2337                 dma_len = sg_dma_len(sgde);
2338                 sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
2339                 sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
2340                 if ((i + 1) == datasegcnt)
2341                         bf_set(lpfc_sli4_sge_last, sgl, 1);
2342                 else
2343                         bf_set(lpfc_sli4_sge_last, sgl, 0);
2344                 bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
2345                 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
2346
2347                 sgl->sge_len = cpu_to_le32(dma_len);
2348                 dma_offset += dma_len;
2349
2350                 sgl++;
2351                 num_sge++;
2352         }
2353
2354 out:
2355         return num_sge;
2356 }
2357
2358 /**
2359  * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
2360  * @phba: The Hba for which this call is being executed.
2361  * @sc: pointer to scsi command we're working on
2362  * @sgl: pointer to buffer list for protection groups
2363  * @datacnt: number of segments of data that have been dma mapped
2364  * @protcnt: number of segment of protection data that have been dma mapped
2365  *
2366  * This function sets up SGL buffer list for protection groups of
2367  * type LPFC_PG_TYPE_DIF
2368  *
2369  * This is usually used when DIFs are in their own buffers,
2370  * separate from the data. The HBA can then by instructed
2371  * to place the DIFs in the outgoing stream.  For read operations,
2372  * The HBA could extract the DIFs and place it in DIF buffers.
2373  *
2374  * The buffer list for this type consists of one or more of the
2375  * protection groups described below:
2376  *                                    +-------------------------+
2377  *   start of first prot group  -->   |         DISEED          |
2378  *                                    +-------------------------+
2379  *                                    |      DIF (Prot SGE)     |
2380  *                                    +-------------------------+
2381  *                                    |        Data SGE         |
2382  *                                    +-------------------------+
2383  *                                    |more Data SGE's ... (opt)|
2384  *                                    +-------------------------+
2385  *   start of new  prot group  -->    |         DISEED          |
2386  *                                    +-------------------------+
2387  *                                    |          ...            |
2388  *                                    +-------------------------+
2389  *
2390  * Note: It is assumed that both data and protection s/g buffers have been
2391  *       mapped for DMA
2392  *
2393  * Returns the number of SGEs added to the SGL.
2394  **/
2395 static int
2396 lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
2397                 struct sli4_sge *sgl, int datacnt, int protcnt)
2398 {
2399         struct scatterlist *sgde = NULL; /* s/g data entry */
2400         struct scatterlist *sgpe = NULL; /* s/g prot entry */
2401         struct sli4_sge_diseed *diseed = NULL;
2402         dma_addr_t dataphysaddr, protphysaddr;
2403         unsigned short curr_data = 0, curr_prot = 0;
2404         unsigned int split_offset;
2405         unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
2406         unsigned int protgrp_blks, protgrp_bytes;
2407         unsigned int remainder, subtotal;
2408         int status;
2409         unsigned char pgdone = 0, alldone = 0;
2410         unsigned blksize;
2411         uint32_t reftag;
2412         uint8_t txop, rxop;
2413         uint32_t dma_len;
2414 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2415         uint32_t rc;
2416 #endif
2417         uint32_t checking = 1;
2418         uint32_t dma_offset = 0;
2419         int num_sge = 0;
2420
2421         sgpe = scsi_prot_sglist(sc);
2422         sgde = scsi_sglist(sc);
2423
2424         if (!sgpe || !sgde) {
2425                 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2426                                 "9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
2427                                 sgpe, sgde);
2428                 return 0;
2429         }
2430
2431         status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
2432         if (status)
2433                 goto out;
2434
2435         /* extract some info from the scsi command */
2436         blksize = lpfc_cmd_blksize(sc);
2437         reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2438
2439 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2440         rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2441         if (rc) {
2442                 if (rc & BG_ERR_SWAP)
2443                         lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2444                 if (rc & BG_ERR_CHECK)
2445                         checking = 0;
2446         }
2447 #endif
2448
2449         split_offset = 0;
2450         do {
2451                 /* Check to see if we ran out of space */
2452                 if (num_sge >= (phba->cfg_total_seg_cnt - 2))
2453                         return num_sge + 3;
2454
2455                 /* setup DISEED with what we have */
2456                 diseed = (struct sli4_sge_diseed *) sgl;
2457                 memset(diseed, 0, sizeof(struct sli4_sge_diseed));
2458                 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
2459
2460                 /* Endianness conversion if necessary */
2461                 diseed->ref_tag = cpu_to_le32(reftag);
2462                 diseed->ref_tag_tran = diseed->ref_tag;
2463
2464                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) {
2465                         bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
2466
2467                 } else {
2468                         bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
2469                         /*
2470                          * When in this mode, the hardware will replace
2471                          * the guard tag from the host with a
2472                          * newly generated good CRC for the wire.
2473                          * Switch to raw mode here to avoid this
2474                          * behavior. What the host sends gets put on the wire.
2475                          */
2476                         if (txop == BG_OP_IN_CRC_OUT_CRC) {
2477                                 txop = BG_OP_RAW_MODE;
2478                                 rxop = BG_OP_RAW_MODE;
2479                         }
2480                 }
2481
2482
2483                 if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2484                         bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
2485                 else
2486                         bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
2487
2488                 /* setup DISEED with the rest of the info */
2489                 bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
2490                 bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2491
2492                 bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
2493                 bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
2494
2495                 /* Endianness conversion if necessary for DISEED */
2496                 diseed->word2 = cpu_to_le32(diseed->word2);
2497                 diseed->word3 = cpu_to_le32(diseed->word3);
2498
2499                 /* advance sgl and increment bde count */
2500                 num_sge++;
2501                 sgl++;
2502
2503                 /* setup the first BDE that points to protection buffer */
2504                 protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
2505                 protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
2506
2507                 /* must be integer multiple of the DIF block length */
2508                 BUG_ON(protgroup_len % 8);
2509
2510                 /* Now setup DIF SGE */
2511                 sgl->word2 = 0;
2512                 bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
2513                 sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
2514                 sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
2515                 sgl->word2 = cpu_to_le32(sgl->word2);
2516
2517                 protgrp_blks = protgroup_len / 8;
2518                 protgrp_bytes = protgrp_blks * blksize;
2519
2520                 /* check if DIF SGE is crossing the 4K boundary; if so split */
2521                 if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
2522                         protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
2523                         protgroup_offset += protgroup_remainder;
2524                         protgrp_blks = protgroup_remainder / 8;
2525                         protgrp_bytes = protgrp_blks * blksize;
2526                 } else {
2527                         protgroup_offset = 0;
2528                         curr_prot++;
2529                 }
2530
2531                 num_sge++;
2532
2533                 /* setup SGE's for data blocks associated with DIF data */
2534                 pgdone = 0;
2535                 subtotal = 0; /* total bytes processed for current prot grp */
2536                 while (!pgdone) {
2537                         /* Check to see if we ran out of space */
2538                         if (num_sge >= phba->cfg_total_seg_cnt)
2539                                 return num_sge + 1;
2540
2541                         if (!sgde) {
2542                                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2543                                         "9086 BLKGRD:%s Invalid data segment\n",
2544                                                 __func__);
2545                                 return 0;
2546                         }
2547                         sgl++;
2548                         dataphysaddr = sg_dma_address(sgde) + split_offset;
2549
2550                         remainder = sg_dma_len(sgde) - split_offset;
2551
2552                         if ((subtotal + remainder) <= protgrp_bytes) {
2553                                 /* we can use this whole buffer */
2554                                 dma_len = remainder;
2555                                 split_offset = 0;
2556
2557                                 if ((subtotal + remainder) == protgrp_bytes)
2558                                         pgdone = 1;
2559                         } else {
2560                                 /* must split this buffer with next prot grp */
2561                                 dma_len = protgrp_bytes - subtotal;
2562                                 split_offset += dma_len;
2563                         }
2564
2565                         subtotal += dma_len;
2566
2567                         sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
2568                         sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
2569                         bf_set(lpfc_sli4_sge_last, sgl, 0);
2570                         bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
2571                         bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
2572
2573                         sgl->sge_len = cpu_to_le32(dma_len);
2574                         dma_offset += dma_len;
2575
2576                         num_sge++;
2577                         curr_data++;
2578
2579                         if (split_offset)
2580                                 break;
2581
2582                         /* Move to the next s/g segment if possible */
2583                         sgde = sg_next(sgde);
2584                 }
2585
2586                 if (protgroup_offset) {
2587                         /* update the reference tag */
2588                         reftag += protgrp_blks;
2589                         sgl++;
2590                         continue;
2591                 }
2592
2593                 /* are we done ? */
2594                 if (curr_prot == protcnt) {
2595                         bf_set(lpfc_sli4_sge_last, sgl, 1);
2596                         alldone = 1;
2597                 } else if (curr_prot < protcnt) {
2598                         /* advance to next prot buffer */
2599                         sgpe = sg_next(sgpe);
2600                         sgl++;
2601
2602                         /* update the reference tag */
2603                         reftag += protgrp_blks;
2604                 } else {
2605                         /* if we're here, we have a bug */
2606                         lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2607                                 "9085 BLKGRD: bug in %s\n", __func__);
2608                 }
2609
2610         } while (!alldone);
2611
2612 out:
2613
2614         return num_sge;
2615 }
2616
2617 /**
2618  * lpfc_prot_group_type - Get prtotection group type of SCSI command
2619  * @phba: The Hba for which this call is being executed.
2620  * @sc: pointer to scsi command we're working on
2621  *
2622  * Given a SCSI command that supports DIF, determine composition of protection
2623  * groups involved in setting up buffer lists
2624  *
2625  * Returns: Protection group type (with or without DIF)
2626  *
2627  **/
2628 static int
2629 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
2630 {
2631         int ret = LPFC_PG_TYPE_INVALID;
2632         unsigned char op = scsi_get_prot_op(sc);
2633
2634         switch (op) {
2635         case SCSI_PROT_READ_STRIP:
2636         case SCSI_PROT_WRITE_INSERT:
2637                 ret = LPFC_PG_TYPE_NO_DIF;
2638                 break;
2639         case SCSI_PROT_READ_INSERT:
2640         case SCSI_PROT_WRITE_STRIP:
2641         case SCSI_PROT_READ_PASS:
2642         case SCSI_PROT_WRITE_PASS:
2643                 ret = LPFC_PG_TYPE_DIF_BUF;
2644                 break;
2645         default:
2646                 if (phba)
2647                         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2648                                         "9021 Unsupported protection op:%d\n",
2649                                         op);
2650                 break;
2651         }
2652         return ret;
2653 }
2654
2655 /**
2656  * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
2657  * @phba: The Hba for which this call is being executed.
2658  * @lpfc_cmd: The scsi buffer which is going to be adjusted.
2659  *
2660  * Adjust the data length to account for how much data
2661  * is actually on the wire.
2662  *
2663  * returns the adjusted data length
2664  **/
2665 static int
2666 lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
2667                        struct lpfc_scsi_buf *lpfc_cmd)
2668 {
2669         struct scsi_cmnd *sc = lpfc_cmd->pCmd;
2670         int fcpdl;
2671
2672         fcpdl = scsi_bufflen(sc);
2673
2674         /* Check if there is protection data on the wire */
2675         if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2676                 /* Read check for protection data */
2677                 if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
2678                         return fcpdl;
2679
2680         } else {
2681                 /* Write check for protection data */
2682                 if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
2683                         return fcpdl;
2684         }
2685
2686         /*
2687          * If we are in DIF Type 1 mode every data block has a 8 byte
2688          * DIF (trailer) attached to it. Must ajust FCP data length
2689          * to account for the protection data.
2690          */
2691         fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
2692
2693         return fcpdl;
2694 }
2695
2696 /**
2697  * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
2698  * @phba: The Hba for which this call is being executed.
2699  * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
2700  *
2701  * This is the protection/DIF aware version of
2702  * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
2703  * two functions eventually, but for now, it's here
2704  **/
2705 static int
2706 lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
2707                 struct lpfc_scsi_buf *lpfc_cmd)
2708 {
2709         struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
2710         struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
2711         struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
2712         IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
2713         uint32_t num_bde = 0;
2714         int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
2715         int prot_group_type = 0;
2716         int fcpdl;
2717
2718         /*
2719          * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
2720          *  fcp_rsp regions to the first data bde entry
2721          */
2722         bpl += 2;
2723         if (scsi_sg_count(scsi_cmnd)) {
2724                 /*
2725                  * The driver stores the segment count returned from pci_map_sg
2726                  * because this a count of dma-mappings used to map the use_sg
2727                  * pages.  They are not guaranteed to be the same for those
2728                  * architectures that implement an IOMMU.
2729                  */
2730                 datasegcnt = dma_map_sg(&phba->pcidev->dev,
2731                                         scsi_sglist(scsi_cmnd),
2732                                         scsi_sg_count(scsi_cmnd), datadir);
2733                 if (unlikely(!datasegcnt))
2734                         return 1;
2735
2736                 lpfc_cmd->seg_cnt = datasegcnt;
2737
2738                 /* First check if data segment count from SCSI Layer is good */
2739                 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
2740                         goto err;
2741
2742                 prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
2743
2744                 switch (prot_group_type) {
2745                 case LPFC_PG_TYPE_NO_DIF:
2746
2747                         /* Here we need to add a PDE5 and PDE6 to the count */
2748                         if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt)
2749                                 goto err;
2750
2751                         num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
2752                                         datasegcnt);
2753                         /* we should have 2 or more entries in buffer list */
2754                         if (num_bde < 2)
2755                                 goto err;
2756                         break;
2757
2758                 case LPFC_PG_TYPE_DIF_BUF:
2759                         /*
2760                          * This type indicates that protection buffers are
2761                          * passed to the driver, so that needs to be prepared
2762                          * for DMA
2763                          */
2764                         protsegcnt = dma_map_sg(&phba->pcidev->dev,
2765                                         scsi_prot_sglist(scsi_cmnd),
2766                                         scsi_prot_sg_count(scsi_cmnd), datadir);
2767                         if (unlikely(!protsegcnt)) {
2768                                 scsi_dma_unmap(scsi_cmnd);
2769                                 return 1;
2770                         }
2771
2772                         lpfc_cmd->prot_seg_cnt = protsegcnt;
2773
2774                         /*
2775                          * There is a minimun of 4 BPLs used for every
2776                          * protection data segment.
2777                          */
2778                         if ((lpfc_cmd->prot_seg_cnt * 4) >
2779                             (phba->cfg_total_seg_cnt - 2))
2780                                 goto err;
2781
2782                         num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
2783                                         datasegcnt, protsegcnt);
2784                         /* we should have 3 or more entries in buffer list */
2785                         if ((num_bde < 3) ||
2786                             (num_bde > phba->cfg_total_seg_cnt))
2787                                 goto err;
2788                         break;
2789
2790                 case LPFC_PG_TYPE_INVALID:
2791                 default:
2792                         scsi_dma_unmap(scsi_cmnd);
2793                         lpfc_cmd->seg_cnt = 0;
2794
2795                         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2796                                         "9022 Unexpected protection group %i\n",
2797                                         prot_group_type);
2798                         return 1;
2799                 }
2800         }
2801
2802         /*
2803          * Finish initializing those IOCB fields that are dependent on the
2804          * scsi_cmnd request_buffer.  Note that the bdeSize is explicitly
2805          * reinitialized since all iocb memory resources are used many times
2806          * for transmit, receive, and continuation bpl's.
2807          */
2808         iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
2809         iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
2810         iocb_cmd->ulpBdeCount = 1;
2811         iocb_cmd->ulpLe = 1;
2812
2813         fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
2814         fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
2815
2816         /*
2817          * Due to difference in data length between DIF/non-DIF paths,
2818          * we need to set word 4 of IOCB here
2819          */
2820         iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
2821
2822         return 0;
2823 err:
2824         if (lpfc_cmd->seg_cnt)
2825                 scsi_dma_unmap(scsi_cmnd);
2826         if (lpfc_cmd->prot_seg_cnt)
2827                 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
2828                              scsi_prot_sg_count(scsi_cmnd),
2829                              scsi_cmnd->sc_data_direction);
2830
2831         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2832                         "9023 Cannot setup S/G List for HBA"
2833                         "IO segs %d/%d BPL %d SCSI %d: %d %d\n",
2834                         lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
2835                         phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
2836                         prot_group_type, num_bde);
2837
2838         lpfc_cmd->seg_cnt = 0;
2839         lpfc_cmd->prot_seg_cnt = 0;
2840         return 1;
2841 }
2842
2843 /*
2844  * This function calcuates the T10 DIF guard tag
2845  * on the specified data using a CRC algorithmn
2846  * using crc_t10dif.
2847  */
2848 static uint16_t
2849 lpfc_bg_crc(uint8_t *data, int count)
2850 {
2851         uint16_t crc = 0;
2852         uint16_t x;
2853
2854         crc = crc_t10dif(data, count);
2855         x = cpu_to_be16(crc);
2856         return x;
2857 }
2858
2859 /*
2860  * This function calcuates the T10 DIF guard tag
2861  * on the specified data using a CSUM algorithmn
2862  * using ip_compute_csum.
2863  */
2864 static uint16_t
2865 lpfc_bg_csum(uint8_t *data, int count)
2866 {
2867         uint16_t ret;
2868
2869         ret = ip_compute_csum(data, count);
2870         return ret;
2871 }
2872
2873 /*
2874  * This function examines the protection data to try to determine
2875  * what type of T10-DIF error occurred.
2876  */
2877 static void
2878 lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
2879 {
2880         struct scatterlist *sgpe; /* s/g prot entry */
2881         struct scatterlist *sgde; /* s/g data entry */
2882         struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
2883         struct scsi_dif_tuple *src = NULL;
2884         uint8_t *data_src = NULL;
2885         uint16_t guard_tag;
2886         uint16_t start_app_tag, app_tag;
2887         uint32_t start_ref_tag, ref_tag;
2888         int prot, protsegcnt;
2889         int err_type, len, data_len;
2890         int chk_ref, chk_app, chk_guard;
2891         uint16_t sum;
2892         unsigned blksize;
2893
2894         err_type = BGS_GUARD_ERR_MASK;
2895         sum = 0;
2896         guard_tag = 0;
2897
2898         /* First check to see if there is protection data to examine */
2899         prot = scsi_get_prot_op(cmd);
2900         if ((prot == SCSI_PROT_READ_STRIP) ||
2901             (prot == SCSI_PROT_WRITE_INSERT) ||
2902             (prot == SCSI_PROT_NORMAL))
2903                 goto out;
2904
2905         /* Currently the driver just supports ref_tag and guard_tag checking */
2906         chk_ref = 1;
2907         chk_app = 0;
2908         chk_guard = 0;
2909
2910         /* Setup a ptr to the protection data provided by the SCSI host */
2911         sgpe = scsi_prot_sglist(cmd);
2912         protsegcnt = lpfc_cmd->prot_seg_cnt;
2913
2914         if (sgpe && protsegcnt) {
2915
2916                 /*
2917                  * We will only try to verify guard tag if the segment
2918                  * data length is a multiple of the blksize.
2919                  */
2920                 sgde = scsi_sglist(cmd);
2921                 blksize = lpfc_cmd_blksize(cmd);
2922                 data_src = (uint8_t *)sg_virt(sgde);
2923                 data_len = sgde->length;
2924                 if ((data_len & (blksize - 1)) == 0)
2925                         chk_guard = 1;
2926
2927                 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
2928                 start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
2929                 start_app_tag = src->app_tag;
2930                 len = sgpe->length;
2931                 while (src && protsegcnt) {
2932                         while (len) {
2933
2934                                 /*
2935                                  * First check to see if a protection data
2936                                  * check is valid
2937                                  */
2938                                 if ((src->ref_tag == T10_PI_REF_ESCAPE) ||
2939                                     (src->app_tag == T10_PI_APP_ESCAPE)) {
2940                                         start_ref_tag++;
2941                                         goto skipit;
2942                                 }
2943
2944                                 /* First Guard Tag checking */
2945                                 if (chk_guard) {
2946                                         guard_tag = src->guard_tag;
2947                                         if (lpfc_cmd_guard_csum(cmd))
2948                                                 sum = lpfc_bg_csum(data_src,
2949                                                                    blksize);
2950                                         else
2951                                                 sum = lpfc_bg_crc(data_src,
2952                                                                   blksize);
2953                                         if ((guard_tag != sum)) {
2954                                                 err_type = BGS_GUARD_ERR_MASK;
2955                                                 goto out;
2956                                         }
2957                                 }
2958
2959                                 /* Reference Tag checking */
2960                                 ref_tag = be32_to_cpu(src->ref_tag);
2961                                 if (chk_ref && (ref_tag != start_ref_tag)) {
2962                                         err_type = BGS_REFTAG_ERR_MASK;
2963                                         goto out;
2964                                 }
2965                                 start_ref_tag++;
2966
2967                                 /* App Tag checking */
2968                                 app_tag = src->app_tag;
2969                                 if (chk_app && (app_tag != start_app_tag)) {
2970                                         err_type = BGS_APPTAG_ERR_MASK;
2971                                         goto out;
2972                                 }
2973 skipit:
2974                                 len -= sizeof(struct scsi_dif_tuple);
2975                                 if (len < 0)
2976                                         len = 0;
2977                                 src++;
2978
2979                                 data_src += blksize;
2980                                 data_len -= blksize;
2981
2982                                 /*
2983                                  * Are we at the end of the Data segment?
2984                                  * The data segment is only used for Guard
2985                                  * tag checking.
2986                                  */
2987                                 if (chk_guard && (data_len == 0)) {
2988                                         chk_guard = 0;
2989                                         sgde = sg_next(sgde);
2990                                         if (!sgde)
2991                                                 goto out;
2992
2993                                         data_src = (uint8_t *)sg_virt(sgde);
2994                                         data_len = sgde->length;
2995                                         if ((data_len & (blksize - 1)) == 0)
2996                                                 chk_guard = 1;
2997                                 }
2998                         }
2999
3000                         /* Goto the next Protection data segment */
3001                         sgpe = sg_next(sgpe);
3002                         if (sgpe) {
3003                                 src = (struct scsi_dif_tuple *)sg_virt(sgpe);
3004                                 len = sgpe->length;
3005                         } else {
3006                                 src = NULL;
3007                         }
3008                         protsegcnt--;
3009                 }
3010         }
3011 out:
3012         if (err_type == BGS_GUARD_ERR_MASK) {
3013                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3014                                         0x10, 0x1);
3015                 cmd->result = DRIVER_SENSE << 24
3016                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3017                 phba->bg_guard_err_cnt++;
3018                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3019                                 "9069 BLKGRD: LBA %lx grd_tag error %x != %x\n",
3020                                 (unsigned long)scsi_get_lba(cmd),
3021                                 sum, guard_tag);
3022
3023         } else if (err_type == BGS_REFTAG_ERR_MASK) {
3024                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3025                                         0x10, 0x3);
3026                 cmd->result = DRIVER_SENSE << 24
3027                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3028
3029                 phba->bg_reftag_err_cnt++;
3030                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3031                                 "9066 BLKGRD: LBA %lx ref_tag error %x != %x\n",
3032                                 (unsigned long)scsi_get_lba(cmd),
3033                                 ref_tag, start_ref_tag);
3034
3035         } else if (err_type == BGS_APPTAG_ERR_MASK) {
3036                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3037                                         0x10, 0x2);
3038                 cmd->result = DRIVER_SENSE << 24
3039                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3040
3041                 phba->bg_apptag_err_cnt++;
3042                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3043                                 "9041 BLKGRD: LBA %lx app_tag error %x != %x\n",
3044                                 (unsigned long)scsi_get_lba(cmd),
3045                                 app_tag, start_app_tag);
3046         }
3047 }
3048
3049
3050 /*
3051  * This function checks for BlockGuard errors detected by
3052  * the HBA.  In case of errors, the ASC/ASCQ fields in the
3053  * sense buffer will be set accordingly, paired with
3054  * ILLEGAL_REQUEST to signal to the kernel that the HBA
3055  * detected corruption.
3056  *
3057  * Returns:
3058  *  0 - No error found
3059  *  1 - BlockGuard error found
3060  * -1 - Internal error (bad profile, ...etc)
3061  */
3062 static int
3063 lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
3064                         struct lpfc_iocbq *pIocbOut)
3065 {
3066         struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
3067         struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
3068         int ret = 0;
3069         uint32_t bghm = bgf->bghm;
3070         uint32_t bgstat = bgf->bgstat;
3071         uint64_t failing_sector = 0;
3072
3073         spin_lock(&_dump_buf_lock);
3074         if (!_dump_buf_done) {
3075                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,  "9070 BLKGRD: Saving"
3076                         " Data for %u blocks to debugfs\n",
3077                                 (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
3078                 lpfc_debug_save_data(phba, cmd);
3079
3080                 /* If we have a prot sgl, save the DIF buffer */
3081                 if (lpfc_prot_group_type(phba, cmd) ==
3082                                 LPFC_PG_TYPE_DIF_BUF) {
3083                         lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9071 BLKGRD: "
3084                                 "Saving DIF for %u blocks to debugfs\n",
3085                                 (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
3086                         lpfc_debug_save_dif(phba, cmd);
3087                 }
3088
3089                 _dump_buf_done = 1;
3090         }
3091         spin_unlock(&_dump_buf_lock);
3092
3093         if (lpfc_bgs_get_invalid_prof(bgstat)) {
3094                 cmd->result = ScsiResult(DID_ERROR, 0);
3095                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3096                                 "9072 BLKGRD: Invalid BG Profile in cmd"
3097                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3098                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3099                                 (unsigned long long)scsi_get_lba(cmd),
3100                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3101                 ret = (-1);
3102                 goto out;
3103         }
3104
3105         if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
3106                 cmd->result = ScsiResult(DID_ERROR, 0);
3107                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3108                                 "9073 BLKGRD: Invalid BG PDIF Block in cmd"
3109                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3110                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3111                                 (unsigned long long)scsi_get_lba(cmd),
3112                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3113                 ret = (-1);
3114                 goto out;
3115         }
3116
3117         if (lpfc_bgs_get_guard_err(bgstat)) {
3118                 ret = 1;
3119
3120                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3121                                 0x10, 0x1);
3122                 cmd->result = DRIVER_SENSE << 24
3123                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3124                 phba->bg_guard_err_cnt++;
3125                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3126                                 "9055 BLKGRD: Guard Tag error in cmd"
3127                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3128                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3129                                 (unsigned long long)scsi_get_lba(cmd),
3130                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3131         }
3132
3133         if (lpfc_bgs_get_reftag_err(bgstat)) {
3134                 ret = 1;
3135
3136                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3137                                 0x10, 0x3);
3138                 cmd->result = DRIVER_SENSE << 24
3139                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3140
3141                 phba->bg_reftag_err_cnt++;
3142                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3143                                 "9056 BLKGRD: Ref Tag error in cmd"
3144                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3145                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3146                                 (unsigned long long)scsi_get_lba(cmd),
3147                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3148         }
3149
3150         if (lpfc_bgs_get_apptag_err(bgstat)) {
3151                 ret = 1;
3152
3153                 scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
3154                                 0x10, 0x2);
3155                 cmd->result = DRIVER_SENSE << 24
3156                         | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
3157
3158                 phba->bg_apptag_err_cnt++;
3159                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3160                                 "9061 BLKGRD: App Tag error in cmd"
3161                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3162                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3163                                 (unsigned long long)scsi_get_lba(cmd),
3164                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3165         }
3166
3167         if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
3168                 /*
3169                  * setup sense data descriptor 0 per SPC-4 as an information
3170                  * field, and put the failing LBA in it.
3171                  * This code assumes there was also a guard/app/ref tag error
3172                  * indication.
3173                  */
3174                 cmd->sense_buffer[7] = 0xc;   /* Additional sense length */
3175                 cmd->sense_buffer[8] = 0;     /* Information descriptor type */
3176                 cmd->sense_buffer[9] = 0xa;   /* Additional descriptor length */
3177                 cmd->sense_buffer[10] = 0x80; /* Validity bit */
3178
3179                 /* bghm is a "on the wire" FC frame based count */
3180                 switch (scsi_get_prot_op(cmd)) {
3181                 case SCSI_PROT_READ_INSERT:
3182                 case SCSI_PROT_WRITE_STRIP:
3183                         bghm /= cmd->device->sector_size;
3184                         break;
3185                 case SCSI_PROT_READ_STRIP:
3186                 case SCSI_PROT_WRITE_INSERT:
3187                 case SCSI_PROT_READ_PASS:
3188                 case SCSI_PROT_WRITE_PASS:
3189                         bghm /= (cmd->device->sector_size +
3190                                 sizeof(struct scsi_dif_tuple));
3191                         break;
3192                 }
3193
3194                 failing_sector = scsi_get_lba(cmd);
3195                 failing_sector += bghm;
3196
3197                 /* Descriptor Information */
3198                 put_unaligned_be64(failing_sector, &cmd->sense_buffer[12]);
3199         }
3200
3201         if (!ret) {
3202                 /* No error was reported - problem in FW? */
3203                 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
3204                                 "9057 BLKGRD: Unknown error in cmd"
3205                                 " 0x%x lba 0x%llx blk cnt 0x%x "
3206                                 "bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
3207                                 (unsigned long long)scsi_get_lba(cmd),
3208                                 blk_rq_sectors(cmd->request), bgstat, bghm);
3209
3210                 /* Calcuate what type of error it was */
3211                 lpfc_calc_bg_err(phba, lpfc_cmd);
3212         }
3213 out:
3214         return ret;
3215 }
3216
3217 /**
3218  * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
3219  * @phba: The Hba for which this call is being executed.
3220  * @lpfc_cmd: The scsi buffer which is going to be mapped.
3221  *
3222  * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
3223  * field of @lpfc_cmd for device with SLI-4 interface spec.
3224  *
3225  * Return codes:
3226  *      1 - Error
3227  *      0 - Success
3228  **/
3229 static int
3230 lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3231 {
3232         struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
3233         struct scatterlist *sgel = NULL;
3234         struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
3235         struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
3236         struct sli4_sge *first_data_sgl;
3237         IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
3238         dma_addr_t physaddr;
3239         uint32_t num_bde = 0;
3240         uint32_t dma_len;
3241         uint32_t dma_offset = 0;
3242         int nseg;
3243         struct ulp_bde64 *bde;
3244
3245         /*
3246          * There are three possibilities here - use scatter-gather segment, use
3247          * the single mapping, or neither.  Start the lpfc command prep by
3248          * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
3249          * data bde entry.
3250          */
3251         if (scsi_sg_count(scsi_cmnd)) {
3252                 /*
3253                  * The driver stores the segment count returned from pci_map_sg
3254                  * because this a count of dma-mappings used to map the use_sg
3255                  * pages.  They are not guaranteed to be the same for those
3256                  * architectures that implement an IOMMU.
3257                  */
3258
3259                 nseg = scsi_dma_map(scsi_cmnd);
3260                 if (unlikely(nseg <= 0))
3261                         return 1;
3262                 sgl += 1;
3263                 /* clear the last flag in the fcp_rsp map entry */
3264                 sgl->word2 = le32_to_cpu(sgl->word2);
3265                 bf_set(lpfc_sli4_sge_last, sgl, 0);
3266                 sgl->word2 = cpu_to_le32(sgl->word2);
3267                 sgl += 1;
3268                 first_data_sgl = sgl;
3269                 lpfc_cmd->seg_cnt = nseg;
3270                 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
3271                         lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
3272                                 " %s: Too many sg segments from "
3273                                 "dma_map_sg.  Config %d, seg_cnt %d\n",
3274                                 __func__, phba->cfg_sg_seg_cnt,
3275                                lpfc_cmd->seg_cnt);
3276                         lpfc_cmd->seg_cnt = 0;
3277                         scsi_dma_unmap(scsi_cmnd);
3278                         return 1;
3279                 }
3280
3281                 /*
3282                  * The driver established a maximum scatter-gather segment count
3283                  * during probe that limits the number of sg elements in any
3284                  * single scsi command.  Just run through the seg_cnt and format
3285                  * the sge's.
3286                  * When using SLI-3 the driver will try to fit all the BDEs into
3287                  * the IOCB. If it can't then the BDEs get added to a BPL as it
3288                  * does for SLI-2 mode.
3289                  */
3290                 scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
3291                         physaddr = sg_dma_address(sgel);
3292                         dma_len = sg_dma_len(sgel);
3293                         sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
3294                         sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
3295                         sgl->word2 = le32_to_cpu(sgl->word2);
3296                         if ((num_bde + 1) == nseg)
3297                                 bf_set(lpfc_sli4_sge_last, sgl, 1);
3298                         else
3299                                 bf_set(lpfc_sli4_sge_last, sgl, 0);
3300                         bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
3301                         bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
3302                         sgl->word2 = cpu_to_le32(sgl->word2);
3303                         sgl->sge_len = cpu_to_le32(dma_len);
3304                         dma_offset += dma_len;
3305                         sgl++;
3306                 }
3307                 /* setup the performance hint (first data BDE) if enabled */
3308                 if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
3309                         bde = (struct ulp_bde64 *)
3310                                         &(iocb_cmd->unsli3.sli3Words[5]);
3311                         bde->addrLow = first_data_sgl->addr_lo;
3312                         bde->addrHigh = first_data_sgl->addr_hi;
3313                         bde->tus.f.bdeSize =
3314                                         le32_to_cpu(first_data_sgl->sge_len);
3315                         bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
3316                         bde->tus.w = cpu_to_le32(bde->tus.w);
3317                 }
3318         } else {
3319                 sgl += 1;
3320                 /* clear the last flag in the fcp_rsp map entry */
3321                 sgl->word2 = le32_to_cpu(sgl->word2);
3322                 bf_set(lpfc_sli4_sge_last, sgl, 1);
3323                 sgl->word2 = cpu_to_le32(sgl->word2);
3324         }
3325
3326         /*
3327          * Finish initializing those IOCB fields that are dependent on the
3328          * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
3329          * explicitly reinitialized.
3330          * all iocb memory resources are reused.
3331          */
3332         fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
3333
3334         /*
3335          * Due to difference in data length between DIF/non-DIF paths,
3336          * we need to set word 4 of IOCB here
3337          */
3338         iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
3339
3340         /*
3341          * If the OAS driver feature is enabled and the lun is enabled for
3342          * OAS, set the oas iocb related flags.
3343          */
3344         if ((phba->cfg_fof) && ((struct lpfc_device_data *)
3345                 scsi_cmnd->device->hostdata)->oas_enabled) {
3346                 lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
3347                 lpfc_cmd->cur_iocbq.priority = ((struct lpfc_device_data *)
3348                         scsi_cmnd->device->hostdata)->priority;
3349         }
3350         return 0;
3351 }
3352
3353 /**
3354  * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
3355  * @phba: The Hba for which this call is being executed.
3356  * @lpfc_cmd: The scsi buffer which is going to be mapped.
3357  *
3358  * This is the protection/DIF aware version of
3359  * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
3360  * two functions eventually, but for now, it's here
3361  **/
3362 static int
3363 lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
3364                 struct lpfc_scsi_buf *lpfc_cmd)
3365 {
3366         struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
3367         struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
3368         struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
3369         IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
3370         uint32_t num_sge = 0;
3371         int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
3372         int prot_group_type = 0;
3373         int fcpdl;
3374
3375         /*
3376          * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
3377          *  fcp_rsp regions to the first data sge entry
3378          */
3379         if (scsi_sg_count(scsi_cmnd)) {
3380                 /*
3381                  * The driver stores the segment count returned from pci_map_sg
3382                  * because this a count of dma-mappings used to map the use_sg
3383                  * pages.  They are not guaranteed to be the same for those
3384                  * architectures that implement an IOMMU.
3385                  */
3386                 datasegcnt = dma_map_sg(&phba->pcidev->dev,
3387                                         scsi_sglist(scsi_cmnd),
3388                                         scsi_sg_count(scsi_cmnd), datadir);
3389                 if (unlikely(!datasegcnt))
3390                         return 1;
3391
3392                 sgl += 1;
3393                 /* clear the last flag in the fcp_rsp map entry */
3394                 sgl->word2 = le32_to_cpu(sgl->word2);
3395                 bf_set(lpfc_sli4_sge_last, sgl, 0);
3396                 sgl->word2 = cpu_to_le32(sgl->word2);
3397
3398                 sgl += 1;
3399                 lpfc_cmd->seg_cnt = datasegcnt;
3400
3401                 /* First check if data segment count from SCSI Layer is good */
3402                 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
3403                         goto err;
3404
3405                 prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
3406
3407                 switch (prot_group_type) {
3408                 case LPFC_PG_TYPE_NO_DIF:
3409                         /* Here we need to add a DISEED to the count */
3410                         if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt)
3411                                 goto err;
3412
3413                         num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
3414                                         datasegcnt);
3415
3416                         /* we should have 2 or more entries in buffer list */
3417                         if (num_sge < 2)
3418                                 goto err;
3419                         break;
3420
3421                 case LPFC_PG_TYPE_DIF_BUF:
3422                         /*
3423                          * This type indicates that protection buffers are
3424                          * passed to the driver, so that needs to be prepared
3425                          * for DMA
3426                          */
3427                         protsegcnt = dma_map_sg(&phba->pcidev->dev,
3428                                         scsi_prot_sglist(scsi_cmnd),
3429                                         scsi_prot_sg_count(scsi_cmnd), datadir);
3430                         if (unlikely(!protsegcnt)) {
3431                                 scsi_dma_unmap(scsi_cmnd);
3432                                 return 1;
3433                         }
3434
3435                         lpfc_cmd->prot_seg_cnt = protsegcnt;
3436                         /*
3437                          * There is a minimun of 3 SGEs used for every
3438                          * protection data segment.
3439                          */
3440                         if ((lpfc_cmd->prot_seg_cnt * 3) >
3441                             (phba->cfg_total_seg_cnt - 2))
3442                                 goto err;
3443
3444                         num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
3445                                         datasegcnt, protsegcnt);
3446
3447                         /* we should have 3 or more entries in buffer list */
3448                         if ((num_sge < 3) ||
3449                             (num_sge > phba->cfg_total_seg_cnt))
3450                                 goto err;
3451                         break;
3452
3453                 case LPFC_PG_TYPE_INVALID:
3454                 default:
3455                         scsi_dma_unmap(scsi_cmnd);
3456                         lpfc_cmd->seg_cnt = 0;
3457
3458                         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
3459                                         "9083 Unexpected protection group %i\n",
3460                                         prot_group_type);
3461                         return 1;
3462                 }
3463         }
3464
3465         switch (scsi_get_prot_op(scsi_cmnd)) {
3466         case SCSI_PROT_WRITE_STRIP:
3467         case SCSI_PROT_READ_STRIP:
3468                 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP;
3469                 break;
3470         case SCSI_PROT_WRITE_INSERT:
3471         case SCSI_PROT_READ_INSERT:
3472                 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT;
3473                 break;
3474         case SCSI_PROT_WRITE_PASS:
3475         case SCSI_PROT_READ_PASS:
3476                 lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS;
3477                 break;
3478         }
3479
3480         fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
3481         fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
3482
3483         /*
3484          * Due to difference in data length between DIF/non-DIF paths,
3485          * we need to set word 4 of IOCB here
3486          */
3487         iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
3488
3489         /*
3490          * If the OAS driver feature is enabled and the lun is enabled for
3491          * OAS, set the oas iocb related flags.
3492          */
3493         if ((phba->cfg_fof) && ((struct lpfc_device_data *)
3494                 scsi_cmnd->device->hostdata)->oas_enabled)
3495                 lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
3496
3497         return 0;
3498 err:
3499         if (lpfc_cmd->seg_cnt)
3500                 scsi_dma_unmap(scsi_cmnd);
3501         if (lpfc_cmd->prot_seg_cnt)
3502                 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
3503                              scsi_prot_sg_count(scsi_cmnd),
3504                              scsi_cmnd->sc_data_direction);
3505
3506         lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
3507                         "9084 Cannot setup S/G List for HBA"
3508                         "IO segs %d/%d SGL %d SCSI %d: %d %d\n",
3509                         lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
3510                         phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
3511                         prot_group_type, num_sge);
3512
3513         lpfc_cmd->seg_cnt = 0;
3514         lpfc_cmd->prot_seg_cnt = 0;
3515         return 1;
3516 }
3517
3518 /**
3519  * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
3520  * @phba: The Hba for which this call is being executed.
3521  * @lpfc_cmd: The scsi buffer which is going to be mapped.
3522  *
3523  * This routine wraps the actual DMA mapping function pointer from the
3524  * lpfc_hba struct.
3525  *
3526  * Return codes:
3527  *      1 - Error
3528  *      0 - Success
3529  **/
3530 static inline int
3531 lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3532 {
3533         return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
3534 }
3535
3536 /**
3537  * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
3538  * using BlockGuard.
3539  * @phba: The Hba for which this call is being executed.
3540  * @lpfc_cmd: The scsi buffer which is going to be mapped.
3541  *
3542  * This routine wraps the actual DMA mapping function pointer from the
3543  * lpfc_hba struct.
3544  *
3545  * Return codes:
3546  *      1 - Error
3547  *      0 - Success
3548  **/
3549 static inline int
3550 lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
3551 {
3552         return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
3553 }
3554
3555 /**
3556  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
3557  * @phba: Pointer to hba context object.
3558  * @vport: Pointer to vport object.
3559  * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
3560  * @rsp_iocb: Pointer to response iocb object which reported error.
3561  *
3562  * This function posts an event when there is a SCSI command reporting
3563  * error from the scsi device.
3564  **/
3565 static void
3566 lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
3567                 struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) {
3568         struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3569         struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
3570         uint32_t resp_info = fcprsp->rspStatus2;
3571         uint32_t scsi_status = fcprsp->rspStatus3;
3572         uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
3573         struct lpfc_fast_path_event *fast_path_evt = NULL;
3574         struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode;
3575         unsigned long flags;
3576
3577         if (!pnode || !NLP_CHK_NODE_ACT(pnode))
3578                 return;
3579
3580         /* If there is queuefull or busy condition send a scsi event */
3581         if ((cmnd->result == SAM_STAT_TASK_SET_FULL) ||
3582                 (cmnd->result == SAM_STAT_BUSY)) {
3583                 fast_path_evt = lpfc_alloc_fast_evt(phba);
3584                 if (!fast_path_evt)
3585                         return;
3586                 fast_path_evt->un.scsi_evt.event_type =
3587                         FC_REG_SCSI_EVENT;
3588                 fast_path_evt->un.scsi_evt.subcategory =
3589                 (cmnd->result == SAM_STAT_TASK_SET_FULL) ?
3590                 LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY;
3591                 fast_path_evt->un.scsi_evt.lun = cmnd->device->lun;
3592                 memcpy(&fast_path_evt->un.scsi_evt.wwpn,
3593                         &pnode->nlp_portname, sizeof(struct lpfc_name));
3594                 memcpy(&fast_path_evt->un.scsi_evt.wwnn,
3595                         &pnode->nlp_nodename, sizeof(struct lpfc_name));
3596         } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen &&
3597                 ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) {
3598                 fast_path_evt = lpfc_alloc_fast_evt(phba);
3599                 if (!fast_path_evt)
3600                         return;
3601                 fast_path_evt->un.check_cond_evt.scsi_event.event_type =
3602                         FC_REG_SCSI_EVENT;
3603                 fast_path_evt->un.check_cond_evt.scsi_event.subcategory =
3604                         LPFC_EVENT_CHECK_COND;
3605                 fast_path_evt->un.check_cond_evt.scsi_event.lun =
3606                         cmnd->device->lun;
3607                 memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn,
3608                         &pnode->nlp_portname, sizeof(struct lpfc_name));
3609                 memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn,
3610                         &pnode->nlp_nodename, sizeof(struct lpfc_name));
3611                 fast_path_evt->un.check_cond_evt.sense_key =
3612                         cmnd->sense_buffer[2] & 0xf;
3613                 fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12];
3614                 fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13];
3615         } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
3616                      fcpi_parm &&
3617                      ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) ||
3618                         ((scsi_status == SAM_STAT_GOOD) &&
3619                         !(resp_info & (RESID_UNDER | RESID_OVER))))) {
3620                 /*
3621                  * If status is good or resid does not match with fcp_param and
3622                  * there is valid fcpi_parm, then there is a read_check error
3623                  */
3624                 fast_path_evt = lpfc_alloc_fast_evt(phba);
3625                 if (!fast_path_evt)
3626                         return;
3627                 fast_path_evt->un.read_check_error.header.event_type =
3628                         FC_REG_FABRIC_EVENT;
3629                 fast_path_evt->un.read_check_error.header.subcategory =
3630                         LPFC_EVENT_FCPRDCHKERR;
3631                 memcpy(&fast_path_evt->un.read_check_error.header.wwpn,
3632                         &pnode->nlp_portname, sizeof(struct lpfc_name));
3633                 memcpy(&fast_path_evt->un.read_check_error.header.wwnn,
3634                         &pnode->nlp_nodename, sizeof(struct lpfc_name));
3635                 fast_path_evt->un.read_check_error.lun = cmnd->device->lun;
3636                 fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0];
3637                 fast_path_evt->un.read_check_error.fcpiparam =
3638                         fcpi_parm;
3639         } else
3640                 return;
3641
3642         fast_path_evt->vport = vport;
3643         spin_lock_irqsave(&phba->hbalock, flags);
3644         list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
3645         spin_unlock_irqrestore(&phba->hbalock, flags);
3646         lpfc_worker_wake_up(phba);
3647         return;
3648 }
3649
3650 /**
3651  * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
3652  * @phba: The HBA for which this call is being executed.
3653  * @psb: The scsi buffer which is going to be un-mapped.
3654  *
3655  * This routine does DMA un-mapping of scatter gather list of scsi command
3656  * field of @lpfc_cmd for device with SLI-3 interface spec.
3657  **/
3658 static void
3659 lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
3660 {
3661         /*
3662          * There are only two special cases to consider.  (1) the scsi command
3663          * requested scatter-gather usage or (2) the scsi command allocated
3664          * a request buffer, but did not request use_sg.  There is a third
3665          * case, but it does not require resource deallocation.
3666          */
3667         if (psb->seg_cnt > 0)
3668                 scsi_dma_unmap(psb->pCmd);
3669         if (psb->prot_seg_cnt > 0)
3670                 dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
3671                                 scsi_prot_sg_count(psb->pCmd),
3672                                 psb->pCmd->sc_data_direction);
3673 }
3674
3675 /**
3676  * lpfc_handler_fcp_err - FCP response handler
3677  * @vport: The virtual port for which this call is being executed.
3678  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
3679  * @rsp_iocb: The response IOCB which contains FCP error.
3680  *
3681  * This routine is called to process response IOCB with status field
3682  * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
3683  * based upon SCSI and FCP error.
3684  **/
3685 static void
3686 lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
3687                     struct lpfc_iocbq *rsp_iocb)
3688 {
3689         struct lpfc_hba *phba = vport->phba;
3690         struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3691         struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
3692         struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
3693         uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
3694         uint32_t resp_info = fcprsp->rspStatus2;
3695         uint32_t scsi_status = fcprsp->rspStatus3;
3696         uint32_t *lp;
3697         uint32_t host_status = DID_OK;
3698         uint32_t rsplen = 0;
3699         uint32_t fcpDl;
3700         uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
3701
3702
3703         /*
3704          *  If this is a task management command, there is no
3705          *  scsi packet associated with this lpfc_cmd.  The driver
3706          *  consumes it.
3707          */
3708         if (fcpcmd->fcpCntl2) {
3709                 scsi_status = 0;
3710                 goto out;
3711         }
3712
3713         if (resp_info & RSP_LEN_VALID) {
3714                 rsplen = be32_to_cpu(fcprsp->rspRspLen);
3715                 if (rsplen != 0 && rsplen != 4 && rsplen != 8) {
3716                         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
3717                                  "2719 Invalid response length: "
3718                                  "tgt x%x lun x%llx cmnd x%x rsplen x%x\n",
3719                                  cmnd->device->id,
3720                                  cmnd->device->lun, cmnd->cmnd[0],
3721                                  rsplen);
3722                         host_status = DID_ERROR;
3723                         goto out;
3724                 }
3725                 if (fcprsp->rspInfo3 != RSP_NO_FAILURE) {
3726                         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
3727                                  "2757 Protocol failure detected during "
3728                                  "processing of FCP I/O op: "
3729                                  "tgt x%x lun x%llx cmnd x%x rspInfo3 x%x\n",
3730                                  cmnd->device->id,
3731                                  cmnd->device->lun, cmnd->cmnd[0],
3732                                  fcprsp->rspInfo3);
3733                         host_status = DID_ERROR;
3734                         goto out;
3735                 }
3736         }
3737
3738         if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
3739                 uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
3740                 if (snslen > SCSI_SENSE_BUFFERSIZE)
3741                         snslen = SCSI_SENSE_BUFFERSIZE;
3742
3743                 if (resp_info & RSP_LEN_VALID)
3744                   rsplen = be32_to_cpu(fcprsp->rspRspLen);
3745                 memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
3746         }
3747         lp = (uint32_t *)cmnd->sense_buffer;
3748
3749         /* special handling for under run conditions */
3750         if (!scsi_status && (resp_info & RESID_UNDER)) {
3751                 /* don't log under runs if fcp set... */
3752                 if (vport->cfg_log_verbose & LOG_FCP)
3753                         logit = LOG_FCP_ERROR;
3754                 /* unless operator says so */
3755                 if (vport->cfg_log_verbose & LOG_FCP_UNDER)
3756                         logit = LOG_FCP_UNDER;
3757         }
3758
3759         lpfc_printf_vlog(vport, KERN_WARNING, logit,
3760                          "9024 FCP command x%x failed: x%x SNS x%x x%x "
3761                          "Data: x%x x%x x%x x%x x%x\n",
3762                          cmnd->cmnd[0], scsi_status,
3763                          be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
3764                          be32_to_cpu(fcprsp->rspResId),
3765                          be32_to_cpu(fcprsp->rspSnsLen),
3766                          be32_to_cpu(fcprsp->rspRspLen),
3767                          fcprsp->rspInfo3);
3768
3769         scsi_set_resid(cmnd, 0);
3770         fcpDl = be32_to_cpu(fcpcmd->fcpDl);
3771         if (resp_info & RESID_UNDER) {
3772                 scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
3773
3774                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
3775                                  "9025 FCP Read Underrun, expected %d, "
3776                                  "residual %d Data: x%x x%x x%x\n",
3777                                  fcpDl,
3778                                  scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
3779                                  cmnd->underflow);
3780
3781                 /*
3782                  * If there is an under run check if under run reported by
3783                  * storage array is same as the under run reported by HBA.
3784                  * If this is not same, there is a dropped frame.
3785                  */
3786                 if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
3787                         fcpi_parm &&
3788                         (scsi_get_resid(cmnd) != fcpi_parm)) {
3789                         lpfc_printf_vlog(vport, KERN_WARNING,
3790                                          LOG_FCP | LOG_FCP_ERROR,
3791                                          "9026 FCP Read Check Error "
3792                                          "and Underrun Data: x%x x%x x%x x%x\n",
3793                                          fcpDl,
3794                                          scsi_get_resid(cmnd), fcpi_parm,
3795                                          cmnd->cmnd[0]);
3796                         scsi_set_resid(cmnd, scsi_bufflen(cmnd));
3797                         host_status = DID_ERROR;
3798                 }
3799                 /*
3800                  * The cmnd->underflow is the minimum number of bytes that must
3801                  * be transferred for this command.  Provided a sense condition
3802                  * is not present, make sure the actual amount transferred is at
3803                  * least the underflow value or fail.
3804                  */
3805                 if (!(resp_info & SNS_LEN_VALID) &&
3806                     (scsi_status == SAM_STAT_GOOD) &&
3807                     (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
3808                      < cmnd->underflow)) {
3809                         lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
3810                                          "9027 FCP command x%x residual "
3811                                          "underrun converted to error "
3812                                          "Data: x%x x%x x%x\n",
3813                                          cmnd->cmnd[0], scsi_bufflen(cmnd),
3814                                          scsi_get_resid(cmnd), cmnd->underflow);
3815                         host_status = DID_ERROR;
3816                 }
3817         } else if (resp_info & RESID_OVER) {
3818                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
3819                                  "9028 FCP command x%x residual overrun error. "
3820                                  "Data: x%x x%x\n", cmnd->cmnd[0],
3821                                  scsi_bufflen(cmnd), scsi_get_resid(cmnd));
3822                 host_status = DID_ERROR;
3823
3824         /*
3825          * Check SLI validation that all the transfer was actually done
3826          * (fcpi_parm should be zero). Apply check only to reads.
3827          */
3828         } else if (fcpi_parm) {
3829                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
3830                                  "9029 FCP %s Check Error xri x%x  Data: "
3831                                  "x%x x%x x%x x%x x%x\n",
3832                                  ((cmnd->sc_data_direction == DMA_FROM_DEVICE) ?
3833                                  "Read" : "Write"),
3834                                  ((phba->sli_rev == LPFC_SLI_REV4) ?
3835                                  lpfc_cmd->cur_iocbq.sli4_xritag :
3836                                  rsp_iocb->iocb.ulpContext),
3837                                  fcpDl, be32_to_cpu(fcprsp->rspResId),
3838                                  fcpi_parm, cmnd->cmnd[0], scsi_status);
3839
3840                 /* There is some issue with the LPe12000 that causes it
3841                  * to miscalculate the fcpi_parm and falsely trip this
3842                  * recovery logic.  Detect this case and don't error when true.
3843                  */
3844                 if (fcpi_parm > fcpDl)
3845                         goto out;
3846
3847                 switch (scsi_status) {
3848                 case SAM_STAT_GOOD:
3849                 case SAM_STAT_CHECK_CONDITION:
3850                         /* Fabric dropped a data frame. Fail any successful
3851                          * command in which we detected dropped frames.
3852                          * A status of good or some check conditions could
3853                          * be considered a successful command.
3854                          */
3855                         host_status = DID_ERROR;
3856                         break;
3857                 }
3858                 scsi_set_resid(cmnd, scsi_bufflen(cmnd));
3859         }
3860
3861  out:
3862         cmnd->result = ScsiResult(host_status, scsi_status);
3863         lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
3864 }
3865
3866 /**
3867  * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
3868  * @phba: Pointer to HBA context object.
3869  *
3870  * This routine performs a roundrobin SCSI command to SLI4 FCP WQ index
3871  * distribution.  This is called by __lpfc_sli_issue_iocb_s4() with the hbalock
3872  * held.
3873  * If scsi-mq is enabled, get the default block layer mapping of software queues
3874  * to hardware queues. This information is saved in request tag.
3875  *
3876  * Return: index into SLI4 fast-path FCP queue index.
3877  **/
3878 int lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba,
3879                                   struct lpfc_scsi_buf *lpfc_cmd)
3880 {
3881         struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
3882         struct lpfc_vector_map_info *cpup;
3883         int chann, cpu;
3884         uint32_t tag;
3885         uint16_t hwq;
3886
3887         if (cmnd && shost_use_blk_mq(cmnd->device->host)) {
3888                 tag = blk_mq_unique_tag(cmnd->request);
3889                 hwq = blk_mq_unique_tag_to_hwq(tag);
3890
3891                 return hwq;
3892         }
3893
3894         if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_CPU
3895             && phba->cfg_fcp_io_channel > 1) {
3896                 cpu = smp_processor_id();
3897                 if (cpu < phba->sli4_hba.num_present_cpu) {
3898                         cpup = phba->sli4_hba.cpu_map;
3899                         cpup += cpu;
3900                         return cpup->channel_id;
3901                 }
3902         }
3903         chann = atomic_add_return(1, &phba->fcp_qidx);
3904         chann = chann % phba->cfg_fcp_io_channel;
3905         return chann;
3906 }
3907
3908
3909 /**
3910  * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
3911  * @phba: The Hba for which this call is being executed.
3912  * @pIocbIn: The command IOCBQ for the scsi cmnd.
3913  * @pIocbOut: The response IOCBQ for the scsi cmnd.
3914  *
3915  * This routine assigns scsi command result by looking into response IOCB
3916  * status field appropriately. This routine handles QUEUE FULL condition as
3917  * well by ramping down device queue depth.
3918  **/
3919 static void
3920 lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
3921                         struct lpfc_iocbq *pIocbOut)
3922 {
3923         struct lpfc_scsi_buf *lpfc_cmd =
3924                 (struct lpfc_scsi_buf *) pIocbIn->context1;
3925         struct lpfc_vport      *vport = pIocbIn->vport;
3926         struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
3927         struct lpfc_nodelist *pnode = rdata->pnode;
3928         struct scsi_cmnd *cmd;
3929         int depth;
3930         unsigned long flags;
3931         struct lpfc_fast_path_event *fast_path_evt;
3932         struct Scsi_Host *shost;
3933         uint32_t logit = LOG_FCP;
3934
3935         atomic_inc(&phba->fc4ScsiIoCmpls);
3936
3937         /* Sanity check on return of outstanding command */
3938         cmd = lpfc_cmd->pCmd;
3939         if (!cmd)
3940                 return;
3941         shost = cmd->device->host;
3942
3943         lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK);
3944         lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
3945         /* pick up SLI4 exhange busy status from HBA */
3946         lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
3947
3948 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
3949         if (lpfc_cmd->prot_data_type) {
3950                 struct scsi_dif_tuple *src = NULL;
3951
3952                 src =  (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
3953                 /*
3954                  * Used to restore any changes to protection
3955                  * data for error injection.
3956                  */
3957                 switch (lpfc_cmd->prot_data_type) {
3958                 case LPFC_INJERR_REFTAG:
3959                         src->ref_tag =
3960                                 lpfc_cmd->prot_data;
3961                         break;
3962                 case LPFC_INJERR_APPTAG:
3963                         src->app_tag =
3964                                 (uint16_t)lpfc_cmd->prot_data;
3965                         break;
3966                 case LPFC_INJERR_GUARD:
3967                         src->guard_tag =
3968                                 (uint16_t)lpfc_cmd->prot_data;
3969                         break;
3970                 default:
3971                         break;
3972                 }
3973
3974                 lpfc_cmd->prot_data = 0;
3975                 lpfc_cmd->prot_data_type = 0;
3976                 lpfc_cmd->prot_data_segment = NULL;
3977         }
3978 #endif
3979
3980         if (pnode && NLP_CHK_NODE_ACT(pnode))
3981                 atomic_dec(&pnode->cmd_pending);
3982
3983         if (lpfc_cmd->status) {
3984                 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
3985                     (lpfc_cmd->result & IOERR_DRVR_MASK))
3986                         lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
3987                 else if (lpfc_cmd->status >= IOSTAT_CNT)
3988                         lpfc_cmd->status = IOSTAT_DEFAULT;
3989                 if (lpfc_cmd->status == IOSTAT_FCP_RSP_ERROR &&
3990                     !lpfc_cmd->fcp_rsp->rspStatus3 &&
3991                     (lpfc_cmd->fcp_rsp->rspStatus2 & RESID_UNDER) &&
3992                     !(vport->cfg_log_verbose & LOG_FCP_UNDER))
3993                         logit = 0;
3994                 else
3995                         logit = LOG_FCP | LOG_FCP_UNDER;
3996                 lpfc_printf_vlog(vport, KERN_WARNING, logit,
3997                          "9030 FCP cmd x%x failed <%d/%lld> "
3998                          "status: x%x result: x%x "
3999                          "sid: x%x did: x%x oxid: x%x "
4000                          "Data: x%x x%x\n",
4001                          cmd->cmnd[0],
4002                          cmd->device ? cmd->device->id : 0xffff,
4003                          cmd->device ? cmd->device->lun : 0xffff,
4004                          lpfc_cmd->status, lpfc_cmd->result,
4005                          vport->fc_myDID,
4006                          (pnode) ? pnode->nlp_DID : 0,
4007                          phba->sli_rev == LPFC_SLI_REV4 ?
4008                              lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
4009                          pIocbOut->iocb.ulpContext,
4010                          lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
4011
4012                 switch (lpfc_cmd->status) {
4013                 case IOSTAT_FCP_RSP_ERROR:
4014                         /* Call FCP RSP handler to determine result */
4015                         lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
4016                         break;
4017                 case IOSTAT_NPORT_BSY:
4018                 case IOSTAT_FABRIC_BSY:
4019                         cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
4020                         fast_path_evt = lpfc_alloc_fast_evt(phba);
4021                         if (!fast_path_evt)
4022                                 break;
4023                         fast_path_evt->un.fabric_evt.event_type =
4024                                 FC_REG_FABRIC_EVENT;
4025                         fast_path_evt->un.fabric_evt.subcategory =
4026                                 (lpfc_cmd->status == IOSTAT_NPORT_BSY) ?
4027                                 LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY;
4028                         if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4029                                 memcpy(&fast_path_evt->un.fabric_evt.wwpn,
4030                                         &pnode->nlp_portname,
4031                                         sizeof(struct lpfc_name));
4032                                 memcpy(&fast_path_evt->un.fabric_evt.wwnn,
4033                                         &pnode->nlp_nodename,
4034                                         sizeof(struct lpfc_name));
4035                         }
4036                         fast_path_evt->vport = vport;
4037                         fast_path_evt->work_evt.evt =
4038                                 LPFC_EVT_FASTPATH_MGMT_EVT;
4039                         spin_lock_irqsave(&phba->hbalock, flags);
4040                         list_add_tail(&fast_path_evt->work_evt.evt_listp,
4041                                 &phba->work_list);
4042                         spin_unlock_irqrestore(&phba->hbalock, flags);
4043                         lpfc_worker_wake_up(phba);
4044                         break;
4045                 case IOSTAT_LOCAL_REJECT:
4046                 case IOSTAT_REMOTE_STOP:
4047                         if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
4048                             lpfc_cmd->result ==
4049                                         IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
4050                             lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
4051                             lpfc_cmd->result ==
4052                                         IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
4053                                 cmd->result = ScsiResult(DID_NO_CONNECT, 0);
4054                                 break;
4055                         }
4056                         if (lpfc_cmd->result == IOERR_INVALID_RPI ||
4057                             lpfc_cmd->result == IOERR_NO_RESOURCES ||
4058                             lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
4059                             lpfc_cmd->result == IOERR_SLER_CMD_RCV_FAILURE) {
4060                                 cmd->result = ScsiResult(DID_REQUEUE, 0);
4061                                 break;
4062                         }
4063                         if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
4064                              lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
4065                              pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
4066                                 if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
4067                                         /*
4068                                          * This is a response for a BG enabled
4069                                          * cmd. Parse BG error
4070                                          */
4071                                         lpfc_parse_bg_err(phba, lpfc_cmd,
4072                                                         pIocbOut);
4073                                         break;
4074                                 } else {
4075                                         lpfc_printf_vlog(vport, KERN_WARNING,
4076                                                         LOG_BG,
4077                                                         "9031 non-zero BGSTAT "
4078                                                         "on unprotected cmd\n");
4079                                 }
4080                         }
4081                         if ((lpfc_cmd->status == IOSTAT_REMOTE_STOP)
4082                                 && (phba->sli_rev == LPFC_SLI_REV4)
4083                                 && (pnode && NLP_CHK_NODE_ACT(pnode))) {
4084                                 /* This IO was aborted by the target, we don't
4085                                  * know the rxid and because we did not send the
4086                                  * ABTS we cannot generate and RRQ.
4087                                  */
4088                                 lpfc_set_rrq_active(phba, pnode,
4089                                         lpfc_cmd->cur_iocbq.sli4_lxritag,
4090                                         0, 0);
4091                         }
4092                 /* else: fall through */
4093                 default:
4094                         cmd->result = ScsiResult(DID_ERROR, 0);
4095                         break;
4096                 }
4097
4098                 if (!pnode || !NLP_CHK_NODE_ACT(pnode)
4099                     || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
4100                         cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
4101                                                  SAM_STAT_BUSY);
4102         } else
4103                 cmd->result = ScsiResult(DID_OK, 0);
4104
4105         if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
4106                 uint32_t *lp = (uint32_t *)cmd->sense_buffer;
4107
4108                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4109                                  "0710 Iodone <%d/%llu> cmd %p, error "
4110                                  "x%x SNS x%x x%x Data: x%x x%x\n",
4111                                  cmd->device->id, cmd->device->lun, cmd,
4112                                  cmd->result, *lp, *(lp + 3), cmd->retries,
4113                                  scsi_get_resid(cmd));
4114         }
4115
4116         lpfc_update_stats(phba, lpfc_cmd);
4117         if (vport->cfg_max_scsicmpl_time &&
4118            time_after(jiffies, lpfc_cmd->start_time +
4119                 msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
4120                 spin_lock_irqsave(shost->host_lock, flags);
4121                 if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4122                         if (pnode->cmd_qdepth >
4123                                 atomic_read(&pnode->cmd_pending) &&
4124                                 (atomic_read(&pnode->cmd_pending) >
4125                                 LPFC_MIN_TGT_QDEPTH) &&
4126                                 ((cmd->cmnd[0] == READ_10) ||
4127                                 (cmd->cmnd[0] == WRITE_10)))
4128                                 pnode->cmd_qdepth =
4129                                         atomic_read(&pnode->cmd_pending);
4130
4131                         pnode->last_change_time = jiffies;
4132                 }
4133                 spin_unlock_irqrestore(shost->host_lock, flags);
4134         } else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4135                 if ((pnode->cmd_qdepth < vport->cfg_tgt_queue_depth) &&
4136                    time_after(jiffies, pnode->last_change_time +
4137                               msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
4138                         spin_lock_irqsave(shost->host_lock, flags);
4139                         depth = pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT
4140                                 / 100;
4141                         depth = depth ? depth : 1;
4142                         pnode->cmd_qdepth += depth;
4143                         if (pnode->cmd_qdepth > vport->cfg_tgt_queue_depth)
4144                                 pnode->cmd_qdepth = vport->cfg_tgt_queue_depth;
4145                         pnode->last_change_time = jiffies;
4146                         spin_unlock_irqrestore(shost->host_lock, flags);
4147                 }
4148         }
4149
4150         lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4151
4152         spin_lock_irqsave(&phba->hbalock, flags);
4153         lpfc_cmd->pCmd = NULL;
4154         spin_unlock_irqrestore(&phba->hbalock, flags);
4155
4156         /* The sdev is not guaranteed to be valid post scsi_done upcall. */
4157         cmd->scsi_done(cmd);
4158
4159         /*
4160          * If there is a thread waiting for command completion
4161          * wake up the thread.
4162          */
4163         spin_lock_irqsave(shost->host_lock, flags);
4164         if (lpfc_cmd->waitq)
4165                 wake_up(lpfc_cmd->waitq);
4166         spin_unlock_irqrestore(shost->host_lock, flags);
4167
4168         lpfc_release_scsi_buf(phba, lpfc_cmd);
4169 }
4170
4171 /**
4172  * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
4173  * @data: A pointer to the immediate command data portion of the IOCB.
4174  * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
4175  *
4176  * The routine copies the entire FCP command from @fcp_cmnd to @data while
4177  * byte swapping the data to big endian format for transmission on the wire.
4178  **/
4179 static void
4180 lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
4181 {
4182         int i, j;
4183         for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
4184              i += sizeof(uint32_t), j++) {
4185                 ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
4186         }
4187 }
4188
4189 /**
4190  * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
4191  * @vport: The virtual port for which this call is being executed.
4192  * @lpfc_cmd: The scsi command which needs to send.
4193  * @pnode: Pointer to lpfc_nodelist.
4194  *
4195  * This routine initializes fcp_cmnd and iocb data structure from scsi command
4196  * to transfer for device with SLI3 interface spec.
4197  **/
4198 static void
4199 lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
4200                     struct lpfc_nodelist *pnode)
4201 {
4202         struct lpfc_hba *phba = vport->phba;
4203         struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
4204         struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
4205         IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
4206         struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
4207         int datadir = scsi_cmnd->sc_data_direction;
4208         uint8_t *ptr;
4209         bool sli4;
4210         uint32_t fcpdl;
4211
4212         if (!pnode || !NLP_CHK_NODE_ACT(pnode))
4213                 return;
4214
4215         lpfc_cmd->fcp_rsp->rspSnsLen = 0;
4216         /* clear task management bits */
4217         lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
4218
4219         int_to_scsilun(lpfc_cmd->pCmd->device->lun,
4220                         &lpfc_cmd->fcp_cmnd->fcp_lun);
4221
4222         ptr = &fcp_cmnd->fcpCdb[0];
4223         memcpy(ptr, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
4224         if (scsi_cmnd->cmd_len < LPFC_FCP_CDB_LEN) {
4225                 ptr += scsi_cmnd->cmd_len;
4226                 memset(ptr, 0, (LPFC_FCP_CDB_LEN - scsi_cmnd->cmd_len));
4227         }
4228
4229         fcp_cmnd->fcpCntl1 = SIMPLE_Q;
4230
4231         sli4 = (phba->sli_rev == LPFC_SLI_REV4);
4232         piocbq->iocb.un.fcpi.fcpi_XRdy = 0;
4233
4234         /*
4235          * There are three possibilities here - use scatter-gather segment, use
4236          * the single mapping, or neither.  Start the lpfc command prep by
4237          * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
4238          * data bde entry.
4239          */
4240         if (scsi_sg_count(scsi_cmnd)) {
4241                 if (datadir == DMA_TO_DEVICE) {
4242                         iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
4243                         iocb_cmd->ulpPU = PARM_READ_CHECK;
4244                         if (vport->cfg_first_burst_size &&
4245                             (pnode->nlp_flag & NLP_FIRSTBURST)) {
4246                                 fcpdl = scsi_bufflen(scsi_cmnd);
4247                                 if (fcpdl < vport->cfg_first_burst_size)
4248                                         piocbq->iocb.un.fcpi.fcpi_XRdy = fcpdl;
4249                                 else
4250                                         piocbq->iocb.un.fcpi.fcpi_XRdy =
4251                                                 vport->cfg_first_burst_size;
4252                         }
4253                         fcp_cmnd->fcpCntl3 = WRITE_DATA;
4254                         atomic_inc(&phba->fc4ScsiOutputRequests);
4255                 } else {
4256                         iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
4257                         iocb_cmd->ulpPU = PARM_READ_CHECK;
4258                         fcp_cmnd->fcpCntl3 = READ_DATA;
4259                         atomic_inc(&phba->fc4ScsiInputRequests);
4260                 }
4261         } else {
4262                 iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
4263                 iocb_cmd->un.fcpi.fcpi_parm = 0;
4264                 iocb_cmd->ulpPU = 0;
4265                 fcp_cmnd->fcpCntl3 = 0;
4266                 atomic_inc(&phba->fc4ScsiControlRequests);
4267         }
4268         if (phba->sli_rev == 3 &&
4269             !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4270                 lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
4271         /*
4272          * Finish initializing those IOCB fields that are independent
4273          * of the scsi_cmnd request_buffer
4274          */
4275         piocbq->iocb.ulpContext = pnode->nlp_rpi;
4276         if (sli4)
4277                 piocbq->iocb.ulpContext =
4278                   phba->sli4_hba.rpi_ids[pnode->nlp_rpi];
4279         if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
4280                 piocbq->iocb.ulpFCP2Rcvy = 1;
4281         else
4282                 piocbq->iocb.ulpFCP2Rcvy = 0;
4283
4284         piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
4285         piocbq->context1  = lpfc_cmd;
4286         piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
4287         piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
4288         piocbq->vport = vport;
4289 }
4290
4291 /**
4292  * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit
4293  * @vport: The virtual port for which this call is being executed.
4294  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
4295  * @lun: Logical unit number.
4296  * @task_mgmt_cmd: SCSI task management command.
4297  *
4298  * This routine creates FCP information unit corresponding to @task_mgmt_cmd
4299  * for device with SLI-3 interface spec.
4300  *
4301  * Return codes:
4302  *   0 - Error
4303  *   1 - Success
4304  **/
4305 static int
4306 lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
4307                              struct lpfc_scsi_buf *lpfc_cmd,
4308                              uint64_t lun,
4309                              uint8_t task_mgmt_cmd)
4310 {
4311         struct lpfc_iocbq *piocbq;
4312         IOCB_t *piocb;
4313         struct fcp_cmnd *fcp_cmnd;
4314         struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
4315         struct lpfc_nodelist *ndlp = rdata->pnode;
4316
4317         if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
4318             ndlp->nlp_state != NLP_STE_MAPPED_NODE)
4319                 return 0;
4320
4321         piocbq = &(lpfc_cmd->cur_iocbq);
4322         piocbq->vport = vport;
4323
4324         piocb = &piocbq->iocb;
4325
4326         fcp_cmnd = lpfc_cmd->fcp_cmnd;
4327         /* Clear out any old data in the FCP command area */
4328         memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
4329         int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
4330         fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
4331         if (vport->phba->sli_rev == 3 &&
4332             !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4333                 lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
4334         piocb->ulpCommand = CMD_FCP_ICMND64_CR;
4335         piocb->ulpContext = ndlp->nlp_rpi;
4336         if (vport->phba->sli_rev == LPFC_SLI_REV4) {
4337                 piocb->ulpContext =
4338                   vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
4339         }
4340         piocb->ulpFCP2Rcvy = (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) ? 1 : 0;
4341         piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
4342         piocb->ulpPU = 0;
4343         piocb->un.fcpi.fcpi_parm = 0;
4344
4345         /* ulpTimeout is only one byte */
4346         if (lpfc_cmd->timeout > 0xff) {
4347                 /*
4348                  * Do not timeout the command at the firmware level.
4349                  * The driver will provide the timeout mechanism.
4350                  */
4351                 piocb->ulpTimeout = 0;
4352         } else
4353                 piocb->ulpTimeout = lpfc_cmd->timeout;
4354
4355         if (vport->phba->sli_rev == LPFC_SLI_REV4)
4356                 lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
4357
4358         return 1;
4359 }
4360
4361 /**
4362  * lpfc_scsi_api_table_setup - Set up scsi api function jump table
4363  * @phba: The hba struct for which this call is being executed.
4364  * @dev_grp: The HBA PCI-Device group number.
4365  *
4366  * This routine sets up the SCSI interface API function jump table in @phba
4367  * struct.
4368  * Returns: 0 - success, -ENODEV - failure.
4369  **/
4370 int
4371 lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
4372 {
4373
4374         phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
4375         phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
4376
4377         switch (dev_grp) {
4378         case LPFC_PCI_DEV_LP:
4379                 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
4380                 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
4381                 phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
4382                 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
4383                 phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
4384                 break;
4385         case LPFC_PCI_DEV_OC:
4386                 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
4387                 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
4388                 phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
4389                 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
4390                 phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
4391                 break;
4392         default:
4393                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4394                                 "1418 Invalid HBA PCI-device group: 0x%x\n",
4395                                 dev_grp);
4396                 return -ENODEV;
4397                 break;
4398         }
4399         phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
4400         phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
4401         return 0;
4402 }
4403
4404 /**
4405  * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
4406  * @phba: The Hba for which this call is being executed.
4407  * @cmdiocbq: Pointer to lpfc_iocbq data structure.
4408  * @rspiocbq: Pointer to lpfc_iocbq data structure.
4409  *
4410  * This routine is IOCB completion routine for device reset and target reset
4411  * routine. This routine release scsi buffer associated with lpfc_cmd.
4412  **/
4413 static void
4414 lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
4415                         struct lpfc_iocbq *cmdiocbq,
4416                         struct lpfc_iocbq *rspiocbq)
4417 {
4418         struct lpfc_scsi_buf *lpfc_cmd =
4419                 (struct lpfc_scsi_buf *) cmdiocbq->context1;
4420         if (lpfc_cmd)
4421                 lpfc_release_scsi_buf(phba, lpfc_cmd);
4422         return;
4423 }
4424
4425 /**
4426  * lpfc_info - Info entry point of scsi_host_template data structure
4427  * @host: The scsi host for which this call is being executed.
4428  *
4429  * This routine provides module information about hba.
4430  *
4431  * Reutrn code:
4432  *   Pointer to char - Success.
4433  **/
4434 const char *
4435 lpfc_info(struct Scsi_Host *host)
4436 {
4437         struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
4438         struct lpfc_hba   *phba = vport->phba;
4439         int len, link_speed = 0;
4440         static char  lpfcinfobuf[384];
4441
4442         memset(lpfcinfobuf,0,384);
4443         if (phba && phba->pcidev){
4444                 strncpy(lpfcinfobuf, phba->ModelDesc, 256);
4445                 len = strlen(lpfcinfobuf);
4446                 snprintf(lpfcinfobuf + len,
4447                         384-len,
4448                         " on PCI bus %02x device %02x irq %d",
4449                         phba->pcidev->bus->number,
4450                         phba->pcidev->devfn,
4451                         phba->pcidev->irq);
4452                 len = strlen(lpfcinfobuf);
4453                 if (phba->Port[0]) {
4454                         snprintf(lpfcinfobuf + len,
4455                                  384-len,
4456                                  " port %s",
4457                                  phba->Port);
4458                 }
4459                 len = strlen(lpfcinfobuf);
4460                 link_speed = lpfc_sli_port_speed_get(phba);
4461                 if (link_speed != 0)
4462                         snprintf(lpfcinfobuf + len, 384-len,
4463                                  " Logical Link Speed: %d Mbps", link_speed);
4464         }
4465         return lpfcinfobuf;
4466 }
4467
4468 /**
4469  * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
4470  * @phba: The Hba for which this call is being executed.
4471  *
4472  * This routine modifies fcp_poll_timer  field of @phba by cfg_poll_tmo.
4473  * The default value of cfg_poll_tmo is 10 milliseconds.
4474  **/
4475 static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
4476 {
4477         unsigned long  poll_tmo_expires =
4478                 (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
4479
4480         if (!list_empty(&phba->sli.sli3_ring[LPFC_FCP_RING].txcmplq))
4481                 mod_timer(&phba->fcp_poll_timer,
4482                           poll_tmo_expires);
4483 }
4484
4485 /**
4486  * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
4487  * @phba: The Hba for which this call is being executed.
4488  *
4489  * This routine starts the fcp_poll_timer of @phba.
4490  **/
4491 void lpfc_poll_start_timer(struct lpfc_hba * phba)
4492 {
4493         lpfc_poll_rearm_timer(phba);
4494 }
4495
4496 /**
4497  * lpfc_poll_timeout - Restart polling timer
4498  * @ptr: Map to lpfc_hba data structure pointer.
4499  *
4500  * This routine restarts fcp_poll timer, when FCP ring  polling is enable
4501  * and FCP Ring interrupt is disable.
4502  **/
4503
4504 void lpfc_poll_timeout(struct timer_list *t)
4505 {
4506         struct lpfc_hba *phba = from_timer(phba, t, fcp_poll_timer);
4507
4508         if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4509                 lpfc_sli_handle_fast_ring_event(phba,
4510                         &phba->sli.sli3_ring[LPFC_FCP_RING], HA_R0RE_REQ);
4511
4512                 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4513                         lpfc_poll_rearm_timer(phba);
4514         }
4515 }
4516
4517 /**
4518  * lpfc_queuecommand - scsi_host_template queuecommand entry point
4519  * @cmnd: Pointer to scsi_cmnd data structure.
4520  * @done: Pointer to done routine.
4521  *
4522  * Driver registers this routine to scsi midlayer to submit a @cmd to process.
4523  * This routine prepares an IOCB from scsi command and provides to firmware.
4524  * The @done callback is invoked after driver finished processing the command.
4525  *
4526  * Return value :
4527  *   0 - Success
4528  *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
4529  **/
4530 static int
4531 lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
4532 {
4533         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4534         struct lpfc_hba   *phba = vport->phba;
4535         struct lpfc_rport_data *rdata;
4536         struct lpfc_nodelist *ndlp;
4537         struct lpfc_scsi_buf *lpfc_cmd;
4538         struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
4539         int err;
4540
4541         rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
4542         err = fc_remote_port_chkready(rport);
4543         if (err) {
4544                 cmnd->result = err;
4545                 goto out_fail_command;
4546         }
4547         ndlp = rdata->pnode;
4548
4549         if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
4550                 (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
4551
4552                 lpfc_printf_log(phba, KERN_ERR, LOG_BG,
4553                                 "9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
4554                                 " op:%02x str=%s without registering for"
4555                                 " BlockGuard - Rejecting command\n",
4556                                 cmnd->cmnd[0], scsi_get_prot_op(cmnd),
4557                                 dif_op_str[scsi_get_prot_op(cmnd)]);
4558                 goto out_fail_command;
4559         }
4560
4561         /*
4562          * Catch race where our node has transitioned, but the
4563          * transport is still transitioning.
4564          */
4565         if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
4566                 goto out_tgt_busy;
4567         if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
4568                 goto out_tgt_busy;
4569
4570         lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
4571         if (lpfc_cmd == NULL) {
4572                 lpfc_rampdown_queue_depth(phba);
4573
4574                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_ERROR,
4575                                  "0707 driver's buffer pool is empty, "
4576                                  "IO busied\n");
4577                 goto out_host_busy;
4578         }
4579
4580         /*
4581          * Store the midlayer's command structure for the completion phase
4582          * and complete the command initialization.
4583          */
4584         lpfc_cmd->pCmd  = cmnd;
4585         lpfc_cmd->rdata = rdata;
4586         lpfc_cmd->timeout = 0;
4587         lpfc_cmd->start_time = jiffies;
4588         cmnd->host_scribble = (unsigned char *)lpfc_cmd;
4589
4590         if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
4591                 if (vport->phba->cfg_enable_bg) {
4592                         lpfc_printf_vlog(vport,
4593                                          KERN_INFO, LOG_SCSI_CMD,
4594                                          "9033 BLKGRD: rcvd %s cmd:x%x "
4595                                          "sector x%llx cnt %u pt %x\n",
4596                                          dif_op_str[scsi_get_prot_op(cmnd)],
4597                                          cmnd->cmnd[0],
4598                                          (unsigned long long)scsi_get_lba(cmnd),
4599                                          blk_rq_sectors(cmnd->request),
4600                                          (cmnd->cmnd[1]>>5));
4601                 }
4602                 err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
4603         } else {
4604                 if (vport->phba->cfg_enable_bg) {
4605                         lpfc_printf_vlog(vport,
4606                                          KERN_INFO, LOG_SCSI_CMD,
4607                                          "9038 BLKGRD: rcvd PROT_NORMAL cmd: "
4608                                          "x%x sector x%llx cnt %u pt %x\n",
4609                                          cmnd->cmnd[0],
4610                                          (unsigned long long)scsi_get_lba(cmnd),
4611                                          blk_rq_sectors(cmnd->request),
4612                                          (cmnd->cmnd[1]>>5));
4613                 }
4614                 err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
4615         }
4616
4617         if (err)
4618                 goto out_host_busy_free_buf;
4619
4620         lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
4621
4622         atomic_inc(&ndlp->cmd_pending);
4623         err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
4624                                   &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
4625         if (err) {
4626                 atomic_dec(&ndlp->cmd_pending);
4627                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4628                                  "3376 FCP could not issue IOCB err %x"
4629                                  "FCP cmd x%x <%d/%llu> "
4630                                  "sid: x%x did: x%x oxid: x%x "
4631                                  "Data: x%x x%x x%x x%x\n",
4632                                  err, cmnd->cmnd[0],
4633                                  cmnd->device ? cmnd->device->id : 0xffff,
4634                                  cmnd->device ? cmnd->device->lun : (u64) -1,
4635                                  vport->fc_myDID, ndlp->nlp_DID,
4636                                  phba->sli_rev == LPFC_SLI_REV4 ?
4637                                  lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
4638                                  lpfc_cmd->cur_iocbq.iocb.ulpContext,
4639                                  lpfc_cmd->cur_iocbq.iocb.ulpIoTag,
4640                                  lpfc_cmd->cur_iocbq.iocb.ulpTimeout,
4641                                  (uint32_t)
4642                                  (cmnd->request->timeout / 1000));
4643
4644                 switch (lpfc_cmd->fcp_cmnd->fcpCntl3) {
4645                 case WRITE_DATA:
4646                         atomic_dec(&phba->fc4ScsiOutputRequests);
4647                         break;
4648                 case READ_DATA:
4649                         atomic_dec(&phba->fc4ScsiInputRequests);
4650                         break;
4651                 default:
4652                         atomic_dec(&phba->fc4ScsiControlRequests);
4653                 }
4654                 goto out_host_busy_free_buf;
4655         }
4656         if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4657                 lpfc_sli_handle_fast_ring_event(phba,
4658                         &phba->sli.sli3_ring[LPFC_FCP_RING], HA_R0RE_REQ);
4659
4660                 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4661                         lpfc_poll_rearm_timer(phba);
4662         }
4663
4664         return 0;
4665
4666  out_host_busy_free_buf:
4667         lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4668         lpfc_release_scsi_buf(phba, lpfc_cmd);
4669  out_host_busy:
4670         return SCSI_MLQUEUE_HOST_BUSY;
4671
4672  out_tgt_busy:
4673         return SCSI_MLQUEUE_TARGET_BUSY;
4674
4675  out_fail_command:
4676         cmnd->scsi_done(cmnd);
4677         return 0;
4678 }
4679
4680
4681 /**
4682  * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
4683  * @cmnd: Pointer to scsi_cmnd data structure.
4684  *
4685  * This routine aborts @cmnd pending in base driver.
4686  *
4687  * Return code :
4688  *   0x2003 - Error
4689  *   0x2002 - Success
4690  **/
4691 static int
4692 lpfc_abort_handler(struct scsi_cmnd *cmnd)
4693 {
4694         struct Scsi_Host  *shost = cmnd->device->host;
4695         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
4696         struct lpfc_hba   *phba = vport->phba;
4697         struct lpfc_iocbq *iocb;
4698         struct lpfc_iocbq *abtsiocb;
4699         struct lpfc_scsi_buf *lpfc_cmd;
4700         IOCB_t *cmd, *icmd;
4701         int ret = SUCCESS, status = 0;
4702         struct lpfc_sli_ring *pring_s4;
4703         int ret_val;
4704         unsigned long flags, iflags;
4705         DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
4706
4707         status = fc_block_scsi_eh(cmnd);
4708         if (status != 0 && status != SUCCESS)
4709                 return status;
4710
4711         spin_lock_irqsave(&phba->hbalock, flags);
4712         /* driver queued commands are in process of being flushed */
4713         if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
4714                 spin_unlock_irqrestore(&phba->hbalock, flags);
4715                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4716                         "3168 SCSI Layer abort requested I/O has been "
4717                         "flushed by LLD.\n");
4718                 return FAILED;
4719         }
4720
4721         lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
4722         if (!lpfc_cmd || !lpfc_cmd->pCmd) {
4723                 spin_unlock_irqrestore(&phba->hbalock, flags);
4724                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4725                          "2873 SCSI Layer I/O Abort Request IO CMPL Status "
4726                          "x%x ID %d LUN %llu\n",
4727                          SUCCESS, cmnd->device->id, cmnd->device->lun);
4728                 return SUCCESS;
4729         }
4730
4731         iocb = &lpfc_cmd->cur_iocbq;
4732         /* the command is in process of being cancelled */
4733         if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
4734                 spin_unlock_irqrestore(&phba->hbalock, flags);
4735                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4736                         "3169 SCSI Layer abort requested I/O has been "
4737                         "cancelled by LLD.\n");
4738                 return FAILED;
4739         }
4740         /*
4741          * If pCmd field of the corresponding lpfc_scsi_buf structure
4742          * points to a different SCSI command, then the driver has
4743          * already completed this command, but the midlayer did not
4744          * see the completion before the eh fired. Just return SUCCESS.
4745          */
4746         if (lpfc_cmd->pCmd != cmnd) {
4747                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4748                         "3170 SCSI Layer abort requested I/O has been "
4749                         "completed by LLD.\n");
4750                 goto out_unlock;
4751         }
4752
4753         BUG_ON(iocb->context1 != lpfc_cmd);
4754
4755         /* abort issued in recovery is still in progress */
4756         if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
4757                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4758                          "3389 SCSI Layer I/O Abort Request is pending\n");
4759                 spin_unlock_irqrestore(&phba->hbalock, flags);
4760                 goto wait_for_cmpl;
4761         }
4762
4763         abtsiocb = __lpfc_sli_get_iocbq(phba);
4764         if (abtsiocb == NULL) {
4765                 ret = FAILED;
4766                 goto out_unlock;
4767         }
4768
4769         /* Indicate the IO is being aborted by the driver. */
4770         iocb->iocb_flag |= LPFC_DRIVER_ABORTED;
4771
4772         /*
4773          * The scsi command can not be in txq and it is in flight because the
4774          * pCmd is still pointig at the SCSI command we have to abort. There
4775          * is no need to search the txcmplq. Just send an abort to the FW.
4776          */
4777
4778         cmd = &iocb->iocb;
4779         icmd = &abtsiocb->iocb;
4780         icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
4781         icmd->un.acxri.abortContextTag = cmd->ulpContext;
4782         if (phba->sli_rev == LPFC_SLI_REV4)
4783                 icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
4784         else
4785                 icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
4786
4787         icmd->ulpLe = 1;
4788         icmd->ulpClass = cmd->ulpClass;
4789
4790         /* ABTS WQE must go to the same WQ as the WQE to be aborted */
4791         abtsiocb->hba_wqidx = iocb->hba_wqidx;
4792         abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
4793         if (iocb->iocb_flag & LPFC_IO_FOF)
4794                 abtsiocb->iocb_flag |= LPFC_IO_FOF;
4795
4796         if (lpfc_is_link_up(phba))
4797                 icmd->ulpCommand = CMD_ABORT_XRI_CN;
4798         else
4799                 icmd->ulpCommand = CMD_CLOSE_XRI_CN;
4800
4801         abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
4802         abtsiocb->vport = vport;
4803         if (phba->sli_rev == LPFC_SLI_REV4) {
4804                 pring_s4 = lpfc_sli4_calc_ring(phba, iocb);
4805                 if (pring_s4 == NULL) {
4806                         ret = FAILED;
4807                         goto out_unlock;
4808                 }
4809                 /* Note: both hbalock and ring_lock must be set here */
4810                 spin_lock_irqsave(&pring_s4->ring_lock, iflags);
4811                 ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
4812                                                 abtsiocb, 0);
4813                 spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
4814         } else {
4815                 ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
4816                                                 abtsiocb, 0);
4817         }
4818         /* no longer need the lock after this point */
4819         spin_unlock_irqrestore(&phba->hbalock, flags);
4820
4821
4822         if (ret_val == IOCB_ERROR) {
4823                 lpfc_sli_release_iocbq(phba, abtsiocb);
4824                 ret = FAILED;
4825                 goto out;
4826         }
4827
4828         if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4829                 lpfc_sli_handle_fast_ring_event(phba,
4830                         &phba->sli.sli3_ring[LPFC_FCP_RING], HA_R0RE_REQ);
4831
4832 wait_for_cmpl:
4833         lpfc_cmd->waitq = &waitq;
4834         /* Wait for abort to complete */
4835         wait_event_timeout(waitq,
4836                           (lpfc_cmd->pCmd != cmnd),
4837                            msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
4838
4839         spin_lock_irqsave(shost->host_lock, flags);
4840         lpfc_cmd->waitq = NULL;
4841         spin_unlock_irqrestore(shost->host_lock, flags);
4842
4843         if (lpfc_cmd->pCmd == cmnd) {
4844                 ret = FAILED;
4845                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
4846                                  "0748 abort handler timed out waiting "
4847                                  "for aborting I/O (xri:x%x) to complete: "
4848                                  "ret %#x, ID %d, LUN %llu\n",
4849                                  iocb->sli4_xritag, ret,
4850                                  cmnd->device->id, cmnd->device->lun);
4851         }
4852         goto out;
4853
4854 out_unlock:
4855         spin_unlock_irqrestore(&phba->hbalock, flags);
4856 out:
4857         lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
4858                          "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
4859                          "LUN %llu\n", ret, cmnd->device->id,
4860                          cmnd->device->lun);
4861         return ret;
4862 }
4863
4864 static char *
4865 lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
4866 {
4867         switch (task_mgmt_cmd) {
4868         case FCP_ABORT_TASK_SET:
4869                 return "ABORT_TASK_SET";
4870         case FCP_CLEAR_TASK_SET:
4871                 return "FCP_CLEAR_TASK_SET";
4872         case FCP_BUS_RESET:
4873                 return "FCP_BUS_RESET";
4874         case FCP_LUN_RESET:
4875                 return "FCP_LUN_RESET";
4876         case FCP_TARGET_RESET:
4877                 return "FCP_TARGET_RESET";
4878         case FCP_CLEAR_ACA:
4879                 return "FCP_CLEAR_ACA";
4880         case FCP_TERMINATE_TASK:
4881                 return "FCP_TERMINATE_TASK";
4882         default:
4883                 return "unknown";
4884         }
4885 }
4886
4887
4888 /**
4889  * lpfc_check_fcp_rsp - check the returned fcp_rsp to see if task failed
4890  * @vport: The virtual port for which this call is being executed.
4891  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
4892  *
4893  * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeded
4894  *
4895  * Return code :
4896  *   0x2003 - Error
4897  *   0x2002 - Success
4898  **/
4899 static int
4900 lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd)
4901 {
4902         struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
4903         uint32_t rsp_info;
4904         uint32_t rsp_len;
4905         uint8_t  rsp_info_code;
4906         int ret = FAILED;
4907
4908
4909         if (fcprsp == NULL)
4910                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4911                                  "0703 fcp_rsp is missing\n");
4912         else {
4913                 rsp_info = fcprsp->rspStatus2;
4914                 rsp_len = be32_to_cpu(fcprsp->rspRspLen);
4915                 rsp_info_code = fcprsp->rspInfo3;
4916
4917
4918                 lpfc_printf_vlog(vport, KERN_INFO,
4919                                  LOG_FCP,
4920                                  "0706 fcp_rsp valid 0x%x,"
4921                                  " rsp len=%d code 0x%x\n",
4922                                  rsp_info,
4923                                  rsp_len, rsp_info_code);
4924
4925                 if ((fcprsp->rspStatus2&RSP_LEN_VALID) && (rsp_len == 8)) {
4926                         switch (rsp_info_code) {
4927                         case RSP_NO_FAILURE:
4928                                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4929                                                  "0715 Task Mgmt No Failure\n");
4930                                 ret = SUCCESS;
4931                                 break;
4932                         case RSP_TM_NOT_SUPPORTED: /* TM rejected */
4933                                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4934                                                  "0716 Task Mgmt Target "
4935                                                 "reject\n");
4936                                 break;
4937                         case RSP_TM_NOT_COMPLETED: /* TM failed */
4938                                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4939                                                  "0717 Task Mgmt Target "
4940                                                 "failed TM\n");
4941                                 break;
4942                         case RSP_TM_INVALID_LU: /* TM to invalid LU! */
4943                                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
4944                                                  "0718 Task Mgmt to invalid "
4945                                                 "LUN\n");
4946                                 break;
4947                         }
4948                 }
4949         }
4950         return ret;
4951 }
4952
4953
4954 /**
4955  * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
4956  * @vport: The virtual port for which this call is being executed.
4957  * @rdata: Pointer to remote port local data
4958  * @tgt_id: Target ID of remote device.
4959  * @lun_id: Lun number for the TMF
4960  * @task_mgmt_cmd: type of TMF to send
4961  *
4962  * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
4963  * a remote port.
4964  *
4965  * Return Code:
4966  *   0x2003 - Error
4967  *   0x2002 - Success.
4968  **/
4969 static int
4970 lpfc_send_taskmgmt(struct lpfc_vport *vport, struct scsi_cmnd *cmnd,
4971                    unsigned int tgt_id, uint64_t lun_id,
4972                    uint8_t task_mgmt_cmd)
4973 {
4974         struct lpfc_hba   *phba = vport->phba;
4975         struct lpfc_scsi_buf *lpfc_cmd;
4976         struct lpfc_iocbq *iocbq;
4977         struct lpfc_iocbq *iocbqrsp;
4978         struct lpfc_rport_data *rdata;
4979         struct lpfc_nodelist *pnode;
4980         int ret;
4981         int status;
4982
4983         rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
4984         if (!rdata || !rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
4985                 return FAILED;
4986         pnode = rdata->pnode;
4987
4988         lpfc_cmd = lpfc_get_scsi_buf(phba, pnode);
4989         if (lpfc_cmd == NULL)
4990                 return FAILED;
4991         lpfc_cmd->timeout = phba->cfg_task_mgmt_tmo;
4992         lpfc_cmd->rdata = rdata;
4993         lpfc_cmd->pCmd = cmnd;
4994
4995         status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
4996                                            task_mgmt_cmd);
4997         if (!status) {
4998                 lpfc_release_scsi_buf(phba, lpfc_cmd);
4999                 return FAILED;
5000         }
5001
5002         iocbq = &lpfc_cmd->cur_iocbq;
5003         iocbqrsp = lpfc_sli_get_iocbq(phba);
5004         if (iocbqrsp == NULL) {
5005                 lpfc_release_scsi_buf(phba, lpfc_cmd);
5006                 return FAILED;
5007         }
5008         iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
5009
5010         lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
5011                          "0702 Issue %s to TGT %d LUN %llu "
5012                          "rpi x%x nlp_flag x%x Data: x%x x%x\n",
5013                          lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
5014                          pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag,
5015                          iocbq->iocb_flag);
5016
5017         status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
5018                                           iocbq, iocbqrsp, lpfc_cmd->timeout);
5019         if ((status != IOCB_SUCCESS) ||
5020             (iocbqrsp->iocb.ulpStatus != IOSTAT_SUCCESS)) {
5021                 if (status != IOCB_SUCCESS ||
5022                     iocbqrsp->iocb.ulpStatus != IOSTAT_FCP_RSP_ERROR)
5023                         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5024                                          "0727 TMF %s to TGT %d LUN %llu "
5025                                          "failed (%d, %d) iocb_flag x%x\n",
5026                                          lpfc_taskmgmt_name(task_mgmt_cmd),
5027                                          tgt_id, lun_id,
5028                                          iocbqrsp->iocb.ulpStatus,
5029                                          iocbqrsp->iocb.un.ulpWord[4],
5030                                          iocbq->iocb_flag);
5031                 /* if ulpStatus != IOCB_SUCCESS, then status == IOCB_SUCCESS */
5032                 if (status == IOCB_SUCCESS) {
5033                         if (iocbqrsp->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
5034                                 /* Something in the FCP_RSP was invalid.
5035                                  * Check conditions */
5036                                 ret = lpfc_check_fcp_rsp(vport, lpfc_cmd);
5037                         else
5038                                 ret = FAILED;
5039                 } else if (status == IOCB_TIMEDOUT) {
5040                         ret = TIMEOUT_ERROR;
5041                 } else {
5042                         ret = FAILED;
5043                 }
5044         } else
5045                 ret = SUCCESS;
5046
5047         lpfc_sli_release_iocbq(phba, iocbqrsp);
5048
5049         if (ret != TIMEOUT_ERROR)
5050                 lpfc_release_scsi_buf(phba, lpfc_cmd);
5051
5052         return ret;
5053 }
5054
5055 /**
5056  * lpfc_chk_tgt_mapped -
5057  * @vport: The virtual port to check on
5058  * @cmnd: Pointer to scsi_cmnd data structure.
5059  *
5060  * This routine delays until the scsi target (aka rport) for the
5061  * command exists (is present and logged in) or we declare it non-existent.
5062  *
5063  * Return code :
5064  *  0x2003 - Error
5065  *  0x2002 - Success
5066  **/
5067 static int
5068 lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
5069 {
5070         struct lpfc_rport_data *rdata;
5071         struct lpfc_nodelist *pnode;
5072         unsigned long later;
5073
5074         rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5075         if (!rdata) {
5076                 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
5077                         "0797 Tgt Map rport failure: rdata x%p\n", rdata);
5078                 return FAILED;
5079         }
5080         pnode = rdata->pnode;
5081         /*
5082          * If target is not in a MAPPED state, delay until
5083          * target is rediscovered or devloss timeout expires.
5084          */
5085         later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
5086         while (time_after(later, jiffies)) {
5087                 if (!pnode || !NLP_CHK_NODE_ACT(pnode))
5088                         return FAILED;
5089                 if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
5090                         return SUCCESS;
5091                 schedule_timeout_uninterruptible(msecs_to_jiffies(500));
5092                 rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5093                 if (!rdata)
5094                         return FAILED;
5095                 pnode = rdata->pnode;
5096         }
5097         if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
5098             (pnode->nlp_state != NLP_STE_MAPPED_NODE))
5099                 return FAILED;
5100         return SUCCESS;
5101 }
5102
5103 /**
5104  * lpfc_reset_flush_io_context -
5105  * @vport: The virtual port (scsi_host) for the flush context
5106  * @tgt_id: If aborting by Target contect - specifies the target id
5107  * @lun_id: If aborting by Lun context - specifies the lun id
5108  * @context: specifies the context level to flush at.
5109  *
5110  * After a reset condition via TMF, we need to flush orphaned i/o
5111  * contexts from the adapter. This routine aborts any contexts
5112  * outstanding, then waits for their completions. The wait is
5113  * bounded by devloss_tmo though.
5114  *
5115  * Return code :
5116  *  0x2003 - Error
5117  *  0x2002 - Success
5118  **/
5119 static int
5120 lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
5121                         uint64_t lun_id, lpfc_ctx_cmd context)
5122 {
5123         struct lpfc_hba   *phba = vport->phba;
5124         unsigned long later;
5125         int cnt;
5126
5127         cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
5128         if (cnt)
5129                 lpfc_sli_abort_taskmgmt(vport,
5130                                         &phba->sli.sli3_ring[LPFC_FCP_RING],
5131                                         tgt_id, lun_id, context);
5132         later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
5133         while (time_after(later, jiffies) && cnt) {
5134                 schedule_timeout_uninterruptible(msecs_to_jiffies(20));
5135                 cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
5136         }
5137         if (cnt) {
5138                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5139                         "0724 I/O flush failure for context %s : cnt x%x\n",
5140                         ((context == LPFC_CTX_LUN) ? "LUN" :
5141                          ((context == LPFC_CTX_TGT) ? "TGT" :
5142                           ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
5143                         cnt);
5144                 return FAILED;
5145         }
5146         return SUCCESS;
5147 }
5148
5149 /**
5150  * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
5151  * @cmnd: Pointer to scsi_cmnd data structure.
5152  *
5153  * This routine does a device reset by sending a LUN_RESET task management
5154  * command.
5155  *
5156  * Return code :
5157  *  0x2003 - Error
5158  *  0x2002 - Success
5159  **/
5160 static int
5161 lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
5162 {
5163         struct Scsi_Host  *shost = cmnd->device->host;
5164         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5165         struct lpfc_rport_data *rdata;
5166         struct lpfc_nodelist *pnode;
5167         unsigned tgt_id = cmnd->device->id;
5168         uint64_t lun_id = cmnd->device->lun;
5169         struct lpfc_scsi_event_header scsi_event;
5170         int status;
5171
5172         rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5173         if (!rdata || !rdata->pnode) {
5174                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5175                                  "0798 Device Reset rport failure: rdata x%p\n",
5176                                  rdata);
5177                 return FAILED;
5178         }
5179         pnode = rdata->pnode;
5180         status = fc_block_scsi_eh(cmnd);
5181         if (status != 0 && status != SUCCESS)
5182                 return status;
5183
5184         status = lpfc_chk_tgt_mapped(vport, cmnd);
5185         if (status == FAILED) {
5186                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5187                         "0721 Device Reset rport failure: rdata x%p\n", rdata);
5188                 return FAILED;
5189         }
5190
5191         scsi_event.event_type = FC_REG_SCSI_EVENT;
5192         scsi_event.subcategory = LPFC_EVENT_LUNRESET;
5193         scsi_event.lun = lun_id;
5194         memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
5195         memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
5196
5197         fc_host_post_vendor_event(shost, fc_get_event_number(),
5198                 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5199
5200         status = lpfc_send_taskmgmt(vport, cmnd, tgt_id, lun_id,
5201                                                 FCP_LUN_RESET);
5202
5203         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5204                          "0713 SCSI layer issued Device Reset (%d, %llu) "
5205                          "return x%x\n", tgt_id, lun_id, status);
5206
5207         /*
5208          * We have to clean up i/o as : they may be orphaned by the TMF;
5209          * or if the TMF failed, they may be in an indeterminate state.
5210          * So, continue on.
5211          * We will report success if all the i/o aborts successfully.
5212          */
5213         if (status == SUCCESS)
5214                 status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5215                                                 LPFC_CTX_LUN);
5216
5217         return status;
5218 }
5219
5220 /**
5221  * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
5222  * @cmnd: Pointer to scsi_cmnd data structure.
5223  *
5224  * This routine does a target reset by sending a TARGET_RESET task management
5225  * command.
5226  *
5227  * Return code :
5228  *  0x2003 - Error
5229  *  0x2002 - Success
5230  **/
5231 static int
5232 lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
5233 {
5234         struct Scsi_Host  *shost = cmnd->device->host;
5235         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5236         struct lpfc_rport_data *rdata;
5237         struct lpfc_nodelist *pnode;
5238         unsigned tgt_id = cmnd->device->id;
5239         uint64_t lun_id = cmnd->device->lun;
5240         struct lpfc_scsi_event_header scsi_event;
5241         int status;
5242
5243         rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
5244         if (!rdata) {
5245                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5246                         "0799 Target Reset rport failure: rdata x%p\n", rdata);
5247                 return FAILED;
5248         }
5249         pnode = rdata->pnode;
5250         status = fc_block_scsi_eh(cmnd);
5251         if (status != 0 && status != SUCCESS)
5252                 return status;
5253
5254         status = lpfc_chk_tgt_mapped(vport, cmnd);
5255         if (status == FAILED) {
5256                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5257                         "0722 Target Reset rport failure: rdata x%p\n", rdata);
5258                 if (pnode) {
5259                         spin_lock_irq(shost->host_lock);
5260                         pnode->nlp_flag &= ~NLP_NPR_ADISC;
5261                         pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
5262                         spin_unlock_irq(shost->host_lock);
5263                 }
5264                 lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5265                                           LPFC_CTX_TGT);
5266                 return FAST_IO_FAIL;
5267         }
5268
5269         scsi_event.event_type = FC_REG_SCSI_EVENT;
5270         scsi_event.subcategory = LPFC_EVENT_TGTRESET;
5271         scsi_event.lun = 0;
5272         memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
5273         memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
5274
5275         fc_host_post_vendor_event(shost, fc_get_event_number(),
5276                 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5277
5278         status = lpfc_send_taskmgmt(vport, cmnd, tgt_id, lun_id,
5279                                         FCP_TARGET_RESET);
5280
5281         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5282                          "0723 SCSI layer issued Target Reset (%d, %llu) "
5283                          "return x%x\n", tgt_id, lun_id, status);
5284
5285         /*
5286          * We have to clean up i/o as : they may be orphaned by the TMF;
5287          * or if the TMF failed, they may be in an indeterminate state.
5288          * So, continue on.
5289          * We will report success if all the i/o aborts successfully.
5290          */
5291         if (status == SUCCESS)
5292                 status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5293                                           LPFC_CTX_TGT);
5294         return status;
5295 }
5296
5297 /**
5298  * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
5299  * @cmnd: Pointer to scsi_cmnd data structure.
5300  *
5301  * This routine does target reset to all targets on @cmnd->device->host.
5302  * This emulates Parallel SCSI Bus Reset Semantics.
5303  *
5304  * Return code :
5305  *  0x2003 - Error
5306  *  0x2002 - Success
5307  **/
5308 static int
5309 lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
5310 {
5311         struct Scsi_Host  *shost = cmnd->device->host;
5312         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5313         struct lpfc_nodelist *ndlp = NULL;
5314         struct lpfc_scsi_event_header scsi_event;
5315         int match;
5316         int ret = SUCCESS, status, i;
5317
5318         scsi_event.event_type = FC_REG_SCSI_EVENT;
5319         scsi_event.subcategory = LPFC_EVENT_BUSRESET;
5320         scsi_event.lun = 0;
5321         memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
5322         memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
5323
5324         fc_host_post_vendor_event(shost, fc_get_event_number(),
5325                 sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
5326
5327         status = fc_block_scsi_eh(cmnd);
5328         if (status != 0 && status != SUCCESS)
5329                 return status;
5330
5331         /*
5332          * Since the driver manages a single bus device, reset all
5333          * targets known to the driver.  Should any target reset
5334          * fail, this routine returns failure to the midlayer.
5335          */
5336         for (i = 0; i < LPFC_MAX_TARGET; i++) {
5337                 /* Search for mapped node by target ID */
5338                 match = 0;
5339                 spin_lock_irq(shost->host_lock);
5340                 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
5341                         if (!NLP_CHK_NODE_ACT(ndlp))
5342                                 continue;
5343                         if (vport->phba->cfg_fcp2_no_tgt_reset &&
5344                             (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
5345                                 continue;
5346                         if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
5347                             ndlp->nlp_sid == i &&
5348                             ndlp->rport &&
5349                             ndlp->nlp_type & NLP_FCP_TARGET) {
5350                                 match = 1;
5351                                 break;
5352                         }
5353                 }
5354                 spin_unlock_irq(shost->host_lock);
5355                 if (!match)
5356                         continue;
5357
5358                 status = lpfc_send_taskmgmt(vport, cmnd,
5359                                         i, 0, FCP_TARGET_RESET);
5360
5361                 if (status != SUCCESS) {
5362                         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5363                                          "0700 Bus Reset on target %d failed\n",
5364                                          i);
5365                         ret = FAILED;
5366                 }
5367         }
5368         /*
5369          * We have to clean up i/o as : they may be orphaned by the TMFs
5370          * above; or if any of the TMFs failed, they may be in an
5371          * indeterminate state.
5372          * We will report success if all the i/o aborts successfully.
5373          */
5374
5375         status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
5376         if (status != SUCCESS)
5377                 ret = FAILED;
5378
5379         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5380                          "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
5381         return ret;
5382 }
5383
5384 /**
5385  * lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
5386  * @cmnd: Pointer to scsi_cmnd data structure.
5387  *
5388  * This routine does host reset to the adaptor port. It brings the HBA
5389  * offline, performs a board restart, and then brings the board back online.
5390  * The lpfc_offline calls lpfc_sli_hba_down which will abort and local
5391  * reject all outstanding SCSI commands to the host and error returned
5392  * back to SCSI mid-level. As this will be SCSI mid-level's last resort
5393  * of error handling, it will only return error if resetting of the adapter
5394  * is not successful; in all other cases, will return success.
5395  *
5396  * Return code :
5397  *  0x2003 - Error
5398  *  0x2002 - Success
5399  **/
5400 static int
5401 lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
5402 {
5403         struct Scsi_Host *shost = cmnd->device->host;
5404         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
5405         struct lpfc_hba *phba = vport->phba;
5406         int rc, ret = SUCCESS;
5407
5408         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5409                          "3172 SCSI layer issued Host Reset Data:\n");
5410
5411         lpfc_offline_prep(phba, LPFC_MBX_WAIT);
5412         lpfc_offline(phba);
5413         rc = lpfc_sli_brdrestart(phba);
5414         if (rc)
5415                 ret = FAILED;
5416         rc = lpfc_online(phba);
5417         if (rc)
5418                 ret = FAILED;
5419         lpfc_unblock_mgmt_io(phba);
5420
5421         if (ret == FAILED) {
5422                 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5423                                  "3323 Failed host reset, bring it offline\n");
5424                 lpfc_sli4_offline_eratt(phba);
5425         }
5426         return ret;
5427 }
5428
5429 /**
5430  * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
5431  * @sdev: Pointer to scsi_device.
5432  *
5433  * This routine populates the cmds_per_lun count + 2 scsi_bufs into  this host's
5434  * globally available list of scsi buffers. This routine also makes sure scsi
5435  * buffer is not allocated more than HBA limit conveyed to midlayer. This list
5436  * of scsi buffer exists for the lifetime of the driver.
5437  *
5438  * Return codes:
5439  *   non-0 - Error
5440  *   0 - Success
5441  **/
5442 static int
5443 lpfc_slave_alloc(struct scsi_device *sdev)
5444 {
5445         struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5446         struct lpfc_hba   *phba = vport->phba;
5447         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
5448         uint32_t total = 0;
5449         uint32_t num_to_alloc = 0;
5450         int num_allocated = 0;
5451         uint32_t sdev_cnt;
5452         struct lpfc_device_data *device_data;
5453         unsigned long flags;
5454         struct lpfc_name target_wwpn;
5455
5456         if (!rport || fc_remote_port_chkready(rport))
5457                 return -ENXIO;
5458
5459         if (phba->cfg_fof) {
5460
5461                 /*
5462                  * Check to see if the device data structure for the lun
5463                  * exists.  If not, create one.
5464                  */
5465
5466                 u64_to_wwn(rport->port_name, target_wwpn.u.wwn);
5467                 spin_lock_irqsave(&phba->devicelock, flags);
5468                 device_data = __lpfc_get_device_data(phba,
5469                                                      &phba->luns,
5470                                                      &vport->fc_portname,
5471                                                      &target_wwpn,
5472                                                      sdev->lun);
5473                 if (!device_data) {
5474                         spin_unlock_irqrestore(&phba->devicelock, flags);
5475                         device_data = lpfc_create_device_data(phba,
5476                                                         &vport->fc_portname,
5477                                                         &target_wwpn,
5478                                                         sdev->lun,
5479                                                         phba->cfg_XLanePriority,
5480                                                         true);
5481                         if (!device_data)
5482                                 return -ENOMEM;
5483                         spin_lock_irqsave(&phba->devicelock, flags);
5484                         list_add_tail(&device_data->listentry, &phba->luns);
5485                 }
5486                 device_data->rport_data = rport->dd_data;
5487                 device_data->available = true;
5488                 spin_unlock_irqrestore(&phba->devicelock, flags);
5489                 sdev->hostdata = device_data;
5490         } else {
5491                 sdev->hostdata = rport->dd_data;
5492         }
5493         sdev_cnt = atomic_inc_return(&phba->sdev_cnt);
5494
5495         /*
5496          * Populate the cmds_per_lun count scsi_bufs into this host's globally
5497          * available list of scsi buffers.  Don't allocate more than the
5498          * HBA limit conveyed to the midlayer via the host structure.  The
5499          * formula accounts for the lun_queue_depth + error handlers + 1
5500          * extra.  This list of scsi bufs exists for the lifetime of the driver.
5501          */
5502         total = phba->total_scsi_bufs;
5503         num_to_alloc = vport->cfg_lun_queue_depth + 2;
5504
5505         /* If allocated buffers are enough do nothing */
5506         if ((sdev_cnt * (vport->cfg_lun_queue_depth + 2)) < total)
5507                 return 0;
5508
5509         /* Allow some exchanges to be available always to complete discovery */
5510         if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5511                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
5512                                  "0704 At limitation of %d preallocated "
5513                                  "command buffers\n", total);
5514                 return 0;
5515         /* Allow some exchanges to be available always to complete discovery */
5516         } else if (total + num_to_alloc >
5517                 phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5518                 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
5519                                  "0705 Allocation request of %d "
5520                                  "command buffers will exceed max of %d.  "
5521                                  "Reducing allocation request to %d.\n",
5522                                  num_to_alloc, phba->cfg_hba_queue_depth,
5523                                  (phba->cfg_hba_queue_depth - total));
5524                 num_to_alloc = phba->cfg_hba_queue_depth - total;
5525         }
5526         num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
5527         if (num_to_alloc != num_allocated) {
5528                         lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5529                                          "0708 Allocation request of %d "
5530                                          "command buffers did not succeed.  "
5531                                          "Allocated %d buffers.\n",
5532                                          num_to_alloc, num_allocated);
5533         }
5534         if (num_allocated > 0)
5535                 phba->total_scsi_bufs += num_allocated;
5536         return 0;
5537 }
5538
5539 /**
5540  * lpfc_slave_configure - scsi_host_template slave_configure entry point
5541  * @sdev: Pointer to scsi_device.
5542  *
5543  * This routine configures following items
5544  *   - Tag command queuing support for @sdev if supported.
5545  *   - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
5546  *
5547  * Return codes:
5548  *   0 - Success
5549  **/
5550 static int
5551 lpfc_slave_configure(struct scsi_device *sdev)
5552 {
5553         struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5554         struct lpfc_hba   *phba = vport->phba;
5555
5556         scsi_change_queue_depth(sdev, vport->cfg_lun_queue_depth);
5557
5558         if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
5559                 lpfc_sli_handle_fast_ring_event(phba,
5560                         &phba->sli.sli3_ring[LPFC_FCP_RING], HA_R0RE_REQ);
5561                 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
5562                         lpfc_poll_rearm_timer(phba);
5563         }
5564
5565         return 0;
5566 }
5567
5568 /**
5569  * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
5570  * @sdev: Pointer to scsi_device.
5571  *
5572  * This routine sets @sdev hostatdata filed to null.
5573  **/
5574 static void
5575 lpfc_slave_destroy(struct scsi_device *sdev)
5576 {
5577         struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
5578         struct lpfc_hba   *phba = vport->phba;
5579         unsigned long flags;
5580         struct lpfc_device_data *device_data = sdev->hostdata;
5581
5582         atomic_dec(&phba->sdev_cnt);
5583         if ((phba->cfg_fof) && (device_data)) {
5584                 spin_lock_irqsave(&phba->devicelock, flags);
5585                 device_data->available = false;
5586                 if (!device_data->oas_enabled)
5587                         lpfc_delete_device_data(phba, device_data);
5588                 spin_unlock_irqrestore(&phba->devicelock, flags);
5589         }
5590         sdev->hostdata = NULL;
5591         return;
5592 }
5593
5594 /**
5595  * lpfc_create_device_data - creates and initializes device data structure for OAS
5596  * @pha: Pointer to host bus adapter structure.
5597  * @vport_wwpn: Pointer to vport's wwpn information
5598  * @target_wwpn: Pointer to target's wwpn information
5599  * @lun: Lun on target
5600  * @atomic_create: Flag to indicate if memory should be allocated using the
5601  *                GFP_ATOMIC flag or not.
5602  *
5603  * This routine creates a device data structure which will contain identifying
5604  * information for the device (host wwpn, target wwpn, lun), state of OAS,
5605  * whether or not the corresponding lun is available by the system,
5606  * and pointer to the rport data.
5607  *
5608  * Return codes:
5609  *   NULL - Error
5610  *   Pointer to lpfc_device_data - Success
5611  **/
5612 struct lpfc_device_data*
5613 lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5614                         struct lpfc_name *target_wwpn, uint64_t lun,
5615                         uint32_t pri, bool atomic_create)
5616 {
5617
5618         struct lpfc_device_data *lun_info;
5619         int memory_flags;
5620
5621         if (unlikely(!phba) || !vport_wwpn || !target_wwpn  ||
5622             !(phba->cfg_fof))
5623                 return NULL;
5624
5625         /* Attempt to create the device data to contain lun info */
5626
5627         if (atomic_create)
5628                 memory_flags = GFP_ATOMIC;
5629         else
5630                 memory_flags = GFP_KERNEL;
5631         lun_info = mempool_alloc(phba->device_data_mem_pool, memory_flags);
5632         if (!lun_info)
5633                 return NULL;
5634         INIT_LIST_HEAD(&lun_info->listentry);
5635         lun_info->rport_data  = NULL;
5636         memcpy(&lun_info->device_id.vport_wwpn, vport_wwpn,
5637                sizeof(struct lpfc_name));
5638         memcpy(&lun_info->device_id.target_wwpn, target_wwpn,
5639                sizeof(struct lpfc_name));
5640         lun_info->device_id.lun = lun;
5641         lun_info->oas_enabled = false;
5642         lun_info->priority = pri;
5643         lun_info->available = false;
5644         return lun_info;
5645 }
5646
5647 /**
5648  * lpfc_delete_device_data - frees a device data structure for OAS
5649  * @pha: Pointer to host bus adapter structure.
5650  * @lun_info: Pointer to device data structure to free.
5651  *
5652  * This routine frees the previously allocated device data structure passed.
5653  *
5654  **/
5655 void
5656 lpfc_delete_device_data(struct lpfc_hba *phba,
5657                         struct lpfc_device_data *lun_info)
5658 {
5659
5660         if (unlikely(!phba) || !lun_info  ||
5661             !(phba->cfg_fof))
5662                 return;
5663
5664         if (!list_empty(&lun_info->listentry))
5665                 list_del(&lun_info->listentry);
5666         mempool_free(lun_info, phba->device_data_mem_pool);
5667         return;
5668 }
5669
5670 /**
5671  * __lpfc_get_device_data - returns the device data for the specified lun
5672  * @pha: Pointer to host bus adapter structure.
5673  * @list: Point to list to search.
5674  * @vport_wwpn: Pointer to vport's wwpn information
5675  * @target_wwpn: Pointer to target's wwpn information
5676  * @lun: Lun on target
5677  *
5678  * This routine searches the list passed for the specified lun's device data.
5679  * This function does not hold locks, it is the responsibility of the caller
5680  * to ensure the proper lock is held before calling the function.
5681  *
5682  * Return codes:
5683  *   NULL - Error
5684  *   Pointer to lpfc_device_data - Success
5685  **/
5686 struct lpfc_device_data*
5687 __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
5688                        struct lpfc_name *vport_wwpn,
5689                        struct lpfc_name *target_wwpn, uint64_t lun)
5690 {
5691
5692         struct lpfc_device_data *lun_info;
5693
5694         if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn ||
5695             !phba->cfg_fof)
5696                 return NULL;
5697
5698         /* Check to see if the lun is already enabled for OAS. */
5699
5700         list_for_each_entry(lun_info, list, listentry) {
5701                 if ((memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn,
5702                             sizeof(struct lpfc_name)) == 0) &&
5703                     (memcmp(&lun_info->device_id.target_wwpn, target_wwpn,
5704                             sizeof(struct lpfc_name)) == 0) &&
5705                     (lun_info->device_id.lun == lun))
5706                         return lun_info;
5707         }
5708
5709         return NULL;
5710 }
5711
5712 /**
5713  * lpfc_find_next_oas_lun - searches for the next oas lun
5714  * @pha: Pointer to host bus adapter structure.
5715  * @vport_wwpn: Pointer to vport's wwpn information
5716  * @target_wwpn: Pointer to target's wwpn information
5717  * @starting_lun: Pointer to the lun to start searching for
5718  * @found_vport_wwpn: Pointer to the found lun's vport wwpn information
5719  * @found_target_wwpn: Pointer to the found lun's target wwpn information
5720  * @found_lun: Pointer to the found lun.
5721  * @found_lun_status: Pointer to status of the found lun.
5722  *
5723  * This routine searches the luns list for the specified lun
5724  * or the first lun for the vport/target.  If the vport wwpn contains
5725  * a zero value then a specific vport is not specified. In this case
5726  * any vport which contains the lun will be considered a match.  If the
5727  * target wwpn contains a zero value then a specific target is not specified.
5728  * In this case any target which contains the lun will be considered a
5729  * match.  If the lun is found, the lun, vport wwpn, target wwpn and lun status
5730  * are returned.  The function will also return the next lun if available.
5731  * If the next lun is not found, starting_lun parameter will be set to
5732  * NO_MORE_OAS_LUN.
5733  *
5734  * Return codes:
5735  *   non-0 - Error
5736  *   0 - Success
5737  **/
5738 bool
5739 lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5740                        struct lpfc_name *target_wwpn, uint64_t *starting_lun,
5741                        struct lpfc_name *found_vport_wwpn,
5742                        struct lpfc_name *found_target_wwpn,
5743                        uint64_t *found_lun,
5744                        uint32_t *found_lun_status,
5745                        uint32_t *found_lun_pri)
5746 {
5747
5748         unsigned long flags;
5749         struct lpfc_device_data *lun_info;
5750         struct lpfc_device_id *device_id;
5751         uint64_t lun;
5752         bool found = false;
5753
5754         if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5755             !starting_lun || !found_vport_wwpn ||
5756             !found_target_wwpn || !found_lun || !found_lun_status ||
5757             (*starting_lun == NO_MORE_OAS_LUN) ||
5758             !phba->cfg_fof)
5759                 return false;
5760
5761         lun = *starting_lun;
5762         *found_lun = NO_MORE_OAS_LUN;
5763         *starting_lun = NO_MORE_OAS_LUN;
5764
5765         /* Search for lun or the lun closet in value */
5766
5767         spin_lock_irqsave(&phba->devicelock, flags);
5768         list_for_each_entry(lun_info, &phba->luns, listentry) {
5769                 if (((wwn_to_u64(vport_wwpn->u.wwn) == 0) ||
5770                      (memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn,
5771                             sizeof(struct lpfc_name)) == 0)) &&
5772                     ((wwn_to_u64(target_wwpn->u.wwn) == 0) ||
5773                      (memcmp(&lun_info->device_id.target_wwpn, target_wwpn,
5774                             sizeof(struct lpfc_name)) == 0)) &&
5775                     (lun_info->oas_enabled)) {
5776                         device_id = &lun_info->device_id;
5777                         if ((!found) &&
5778                             ((lun == FIND_FIRST_OAS_LUN) ||
5779                              (device_id->lun == lun))) {
5780                                 *found_lun = device_id->lun;
5781                                 memcpy(found_vport_wwpn,
5782                                        &device_id->vport_wwpn,
5783                                        sizeof(struct lpfc_name));
5784                                 memcpy(found_target_wwpn,
5785                                        &device_id->target_wwpn,
5786                                        sizeof(struct lpfc_name));
5787                                 if (lun_info->available)
5788                                         *found_lun_status =
5789                                                 OAS_LUN_STATUS_EXISTS;
5790                                 else
5791                                         *found_lun_status = 0;
5792                                 *found_lun_pri = lun_info->priority;
5793                                 if (phba->cfg_oas_flags & OAS_FIND_ANY_VPORT)
5794                                         memset(vport_wwpn, 0x0,
5795                                                sizeof(struct lpfc_name));
5796                                 if (phba->cfg_oas_flags & OAS_FIND_ANY_TARGET)
5797                                         memset(target_wwpn, 0x0,
5798                                                sizeof(struct lpfc_name));
5799                                 found = true;
5800                         } else if (found) {
5801                                 *starting_lun = device_id->lun;
5802                                 memcpy(vport_wwpn, &device_id->vport_wwpn,
5803                                        sizeof(struct lpfc_name));
5804                                 memcpy(target_wwpn, &device_id->target_wwpn,
5805                                        sizeof(struct lpfc_name));
5806                                 break;
5807                         }
5808                 }
5809         }
5810         spin_unlock_irqrestore(&phba->devicelock, flags);
5811         return found;
5812 }
5813
5814 /**
5815  * lpfc_enable_oas_lun - enables a lun for OAS operations
5816  * @pha: Pointer to host bus adapter structure.
5817  * @vport_wwpn: Pointer to vport's wwpn information
5818  * @target_wwpn: Pointer to target's wwpn information
5819  * @lun: Lun
5820  *
5821  * This routine enables a lun for oas operations.  The routines does so by
5822  * doing the following :
5823  *
5824  *   1) Checks to see if the device data for the lun has been created.
5825  *   2) If found, sets the OAS enabled flag if not set and returns.
5826  *   3) Otherwise, creates a device data structure.
5827  *   4) If successfully created, indicates the device data is for an OAS lun,
5828  *   indicates the lun is not available and add to the list of luns.
5829  *
5830  * Return codes:
5831  *   false - Error
5832  *   true - Success
5833  **/
5834 bool
5835 lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5836                     struct lpfc_name *target_wwpn, uint64_t lun, uint8_t pri)
5837 {
5838
5839         struct lpfc_device_data *lun_info;
5840         unsigned long flags;
5841
5842         if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5843             !phba->cfg_fof)
5844                 return false;
5845
5846         spin_lock_irqsave(&phba->devicelock, flags);
5847
5848         /* Check to see if the device data for the lun has been created */
5849         lun_info = __lpfc_get_device_data(phba, &phba->luns, vport_wwpn,
5850                                           target_wwpn, lun);
5851         if (lun_info) {
5852                 if (!lun_info->oas_enabled)
5853                         lun_info->oas_enabled = true;
5854                 lun_info->priority = pri;
5855                 spin_unlock_irqrestore(&phba->devicelock, flags);
5856                 return true;
5857         }
5858
5859         /* Create an lun info structure and add to list of luns */
5860         lun_info = lpfc_create_device_data(phba, vport_wwpn, target_wwpn, lun,
5861                                            pri, false);
5862         if (lun_info) {
5863                 lun_info->oas_enabled = true;
5864                 lun_info->priority = pri;
5865                 lun_info->available = false;
5866                 list_add_tail(&lun_info->listentry, &phba->luns);
5867                 spin_unlock_irqrestore(&phba->devicelock, flags);
5868                 return true;
5869         }
5870         spin_unlock_irqrestore(&phba->devicelock, flags);
5871         return false;
5872 }
5873
5874 /**
5875  * lpfc_disable_oas_lun - disables a lun for OAS operations
5876  * @pha: Pointer to host bus adapter structure.
5877  * @vport_wwpn: Pointer to vport's wwpn information
5878  * @target_wwpn: Pointer to target's wwpn information
5879  * @lun: Lun
5880  *
5881  * This routine disables a lun for oas operations.  The routines does so by
5882  * doing the following :
5883  *
5884  *   1) Checks to see if the device data for the lun is created.
5885  *   2) If present, clears the flag indicating this lun is for OAS.
5886  *   3) If the lun is not available by the system, the device data is
5887  *   freed.
5888  *
5889  * Return codes:
5890  *   false - Error
5891  *   true - Success
5892  **/
5893 bool
5894 lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
5895                      struct lpfc_name *target_wwpn, uint64_t lun, uint8_t pri)
5896 {
5897
5898         struct lpfc_device_data *lun_info;
5899         unsigned long flags;
5900
5901         if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
5902             !phba->cfg_fof)
5903                 return false;
5904
5905         spin_lock_irqsave(&phba->devicelock, flags);
5906
5907         /* Check to see if the lun is available. */
5908         lun_info = __lpfc_get_device_data(phba,
5909                                           &phba->luns, vport_wwpn,
5910                                           target_wwpn, lun);
5911         if (lun_info) {
5912                 lun_info->oas_enabled = false;
5913                 lun_info->priority = pri;
5914                 if (!lun_info->available)
5915                         lpfc_delete_device_data(phba, lun_info);
5916                 spin_unlock_irqrestore(&phba->devicelock, flags);
5917                 return true;
5918         }
5919
5920         spin_unlock_irqrestore(&phba->devicelock, flags);
5921         return false;
5922 }
5923
5924 static int
5925 lpfc_no_command(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
5926 {
5927         return SCSI_MLQUEUE_HOST_BUSY;
5928 }
5929
5930 static int
5931 lpfc_no_handler(struct scsi_cmnd *cmnd)
5932 {
5933         return FAILED;
5934 }
5935
5936 static int
5937 lpfc_no_slave(struct scsi_device *sdev)
5938 {
5939         return -ENODEV;
5940 }
5941
5942 struct scsi_host_template lpfc_template_nvme = {
5943         .module                 = THIS_MODULE,
5944         .name                   = LPFC_DRIVER_NAME,
5945         .proc_name              = LPFC_DRIVER_NAME,
5946         .info                   = lpfc_info,
5947         .queuecommand           = lpfc_no_command,
5948         .eh_abort_handler       = lpfc_no_handler,
5949         .eh_device_reset_handler = lpfc_no_handler,
5950         .eh_target_reset_handler = lpfc_no_handler,
5951         .eh_bus_reset_handler   = lpfc_no_handler,
5952         .eh_host_reset_handler  = lpfc_no_handler,
5953         .slave_alloc            = lpfc_no_slave,
5954         .slave_configure        = lpfc_no_slave,
5955         .scan_finished          = lpfc_scan_finished,
5956         .this_id                = -1,
5957         .sg_tablesize           = 1,
5958         .cmd_per_lun            = 1,
5959         .use_clustering         = ENABLE_CLUSTERING,
5960         .shost_attrs            = lpfc_hba_attrs,
5961         .max_sectors            = 0xFFFF,
5962         .vendor_id              = LPFC_NL_VENDOR_ID,
5963         .track_queue_depth      = 0,
5964 };
5965
5966 struct scsi_host_template lpfc_template_no_hr = {
5967         .module                 = THIS_MODULE,
5968         .name                   = LPFC_DRIVER_NAME,
5969         .proc_name              = LPFC_DRIVER_NAME,
5970         .info                   = lpfc_info,
5971         .queuecommand           = lpfc_queuecommand,
5972         .eh_timed_out           = fc_eh_timed_out,
5973         .eh_abort_handler       = lpfc_abort_handler,
5974         .eh_device_reset_handler = lpfc_device_reset_handler,
5975         .eh_target_reset_handler = lpfc_target_reset_handler,
5976         .eh_bus_reset_handler   = lpfc_bus_reset_handler,
5977         .slave_alloc            = lpfc_slave_alloc,
5978         .slave_configure        = lpfc_slave_configure,
5979         .slave_destroy          = lpfc_slave_destroy,
5980         .scan_finished          = lpfc_scan_finished,
5981         .this_id                = -1,
5982         .sg_tablesize           = LPFC_DEFAULT_SG_SEG_CNT,
5983         .cmd_per_lun            = LPFC_CMD_PER_LUN,
5984         .use_clustering         = ENABLE_CLUSTERING,
5985         .shost_attrs            = lpfc_hba_attrs,
5986         .max_sectors            = 0xFFFF,
5987         .vendor_id              = LPFC_NL_VENDOR_ID,
5988         .change_queue_depth     = scsi_change_queue_depth,
5989         .track_queue_depth      = 1,
5990 };
5991
5992 struct scsi_host_template lpfc_template = {
5993         .module                 = THIS_MODULE,
5994         .name                   = LPFC_DRIVER_NAME,
5995         .proc_name              = LPFC_DRIVER_NAME,
5996         .info                   = lpfc_info,
5997         .queuecommand           = lpfc_queuecommand,
5998         .eh_timed_out           = fc_eh_timed_out,
5999         .eh_abort_handler       = lpfc_abort_handler,
6000         .eh_device_reset_handler = lpfc_device_reset_handler,
6001         .eh_target_reset_handler = lpfc_target_reset_handler,
6002         .eh_bus_reset_handler   = lpfc_bus_reset_handler,
6003         .eh_host_reset_handler  = lpfc_host_reset_handler,
6004         .slave_alloc            = lpfc_slave_alloc,
6005         .slave_configure        = lpfc_slave_configure,
6006         .slave_destroy          = lpfc_slave_destroy,
6007         .scan_finished          = lpfc_scan_finished,
6008         .this_id                = -1,
6009         .sg_tablesize           = LPFC_DEFAULT_SG_SEG_CNT,
6010         .cmd_per_lun            = LPFC_CMD_PER_LUN,
6011         .use_clustering         = ENABLE_CLUSTERING,
6012         .shost_attrs            = lpfc_hba_attrs,
6013         .max_sectors            = 0xFFFF,
6014         .vendor_id              = LPFC_NL_VENDOR_ID,
6015         .change_queue_depth     = scsi_change_queue_depth,
6016         .track_queue_depth      = 1,
6017 };
6018
6019 struct scsi_host_template lpfc_vport_template = {
6020         .module                 = THIS_MODULE,
6021         .name                   = LPFC_DRIVER_NAME,
6022         .proc_name              = LPFC_DRIVER_NAME,
6023         .info                   = lpfc_info,
6024         .queuecommand           = lpfc_queuecommand,
6025         .eh_timed_out           = fc_eh_timed_out,
6026         .eh_abort_handler       = lpfc_abort_handler,
6027         .eh_device_reset_handler = lpfc_device_reset_handler,
6028         .eh_target_reset_handler = lpfc_target_reset_handler,
6029         .slave_alloc            = lpfc_slave_alloc,
6030         .slave_configure        = lpfc_slave_configure,
6031         .slave_destroy          = lpfc_slave_destroy,
6032         .scan_finished          = lpfc_scan_finished,
6033         .this_id                = -1,
6034         .sg_tablesize           = LPFC_DEFAULT_SG_SEG_CNT,
6035         .cmd_per_lun            = LPFC_CMD_PER_LUN,
6036         .use_clustering         = ENABLE_CLUSTERING,
6037         .shost_attrs            = lpfc_vport_attrs,
6038         .max_sectors            = 0xFFFF,
6039         .change_queue_depth     = scsi_change_queue_depth,
6040         .track_queue_depth      = 1,
6041 };