drivers/scsi/aacraid/commsup.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2, or (at your option)
  13  * any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; see the file COPYING.  If not, write to
  22  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  * Module Name:
  25  *  commsup.c
  26  *
  27  * Abstract: Contain all routines that are required for FSA host/adapter
  28  *    communication.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/sched.h>
  36 #include <linux/pci.h>
  37 #include <linux/spinlock.h>
  38 #include <linux/slab.h>
  39 #include <linux/completion.h>
  40 #include <linux/blkdev.h>
  41 #include <linux/delay.h>
  42 #include <linux/kthread.h>
  43 #include <linux/interrupt.h>
  44 #include <scsi/scsi.h>
  45 #include <scsi/scsi_host.h>
  46 #include <scsi/scsi_device.h>
  47 #include <scsi/scsi_cmnd.h>
  48 #include <asm/semaphore.h>
  49
  50 #include "aacraid.h"
  51
  52 /**
  53  *      fib_map_alloc           -       allocate the fib objects
  54  *      @dev: Adapter to allocate for
  55  *
  56  *      Allocate and map the shared PCI space for the FIB blocks used to
  57  *      talk to the Adaptec firmware.
  58  */
  59
  60 static int fib_map_alloc(struct aac_dev *dev)
  61 {
  62         dprintk((KERN_INFO
  63           "allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n",
  64           dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue,
  65           AAC_NUM_MGT_FIB, &dev->hw_fib_pa));
  66         if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size
  67           * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
  68           &dev->hw_fib_pa))==NULL)
  69                 return -ENOMEM;
  70         return 0;
  71 }
  72
  73 /**
  74  *      aac_fib_map_free                -       free the fib objects
  75  *      @dev: Adapter to free
  76  *
  77  *      Free the PCI mappings and the memory allocated for FIB blocks
  78  *      on this adapter.
  79  */
  80
  81 void aac_fib_map_free(struct aac_dev *dev)
  82 {
  83         pci_free_consistent(dev->pdev,
  84           dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
  85           dev->hw_fib_va, dev->hw_fib_pa);
  86         dev->hw_fib_va = NULL;
  87         dev->hw_fib_pa = 0;
  88 }
  89
  90 /**
  91  *      aac_fib_setup   -       setup the fibs
  92  *      @dev: Adapter to set up
  93  *
  94  *      Allocate the PCI space for the fibs, map it and then intialise the
  95  *      fib area, the unmapped fib data and also the free list
  96  */
  97
  98 int aac_fib_setup(struct aac_dev * dev)
  99 {
 100         struct fib *fibptr;
 101         struct hw_fib *hw_fib;
 102         dma_addr_t hw_fib_pa;
 103         int i;
 104
 105         while (((i = fib_map_alloc(dev)) == -ENOMEM)
 106          && (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) {
 107                 dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1);
 108                 dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB;
 109         }
 110         if (i<0)
 111                 return -ENOMEM;
 112
 113         hw_fib = dev->hw_fib_va;
 114         hw_fib_pa = dev->hw_fib_pa;
 115         memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
 116         /*
 117          *      Initialise the fibs
 118          */
 119         for (i = 0, fibptr = &dev->fibs[i];
 120                 i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
 121                 i++, fibptr++)
 122         {
 123                 fibptr->dev = dev;
 124                 fibptr->hw_fib_va = hw_fib;
 125                 fibptr->data = (void *) fibptr->hw_fib_va->data;
 126                 fibptr->next = fibptr+1;        /* Forward chain the fibs */
 127                 init_MUTEX_LOCKED(&fibptr->event_wait);
 128                 spin_lock_init(&fibptr->event_lock);
 129                 hw_fib->header.XferState = cpu_to_le32(0xffffffff);
 130                 hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
 131                 fibptr->hw_fib_pa = hw_fib_pa;
 132                 hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
 133                 hw_fib_pa = hw_fib_pa + dev->max_fib_size;
 134         }
 135         /*
 136          *      Add the fib chain to the free list
 137          */
 138         dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
 139         /*
 140          *      Enable this to debug out of queue space
 141          */
 142         dev->free_fib = &dev->fibs[0];
 143         return 0;
 144 }
 145
 146 /**
 147  *      aac_fib_alloc   -       allocate a fib
 148  *      @dev: Adapter to allocate the fib for
 149  *
 150  *      Allocate a fib from the adapter fib pool. If the pool is empty we
 151  *      return NULL.
 152  */
 153
 154 struct fib *aac_fib_alloc(struct aac_dev *dev)
 155 {
 156         struct fib * fibptr;
 157         unsigned long flags;
 158         spin_lock_irqsave(&dev->fib_lock, flags);
 159         fibptr = dev->free_fib;
 160         if(!fibptr){
 161                 spin_unlock_irqrestore(&dev->fib_lock, flags);
 162                 return fibptr;
 163         }
 164         dev->free_fib = fibptr->next;
 165         spin_unlock_irqrestore(&dev->fib_lock, flags);
 166         /*
 167          *      Set the proper node type code and node byte size
 168          */
 169         fibptr->type = FSAFS_NTC_FIB_CONTEXT;
 170         fibptr->size = sizeof(struct fib);
 171         /*
 172          *      Null out fields that depend on being zero at the start of
 173          *      each I/O
 174          */
 175         fibptr->hw_fib_va->header.XferState = 0;
 176         fibptr->flags = 0;
 177         fibptr->callback = NULL;
 178         fibptr->callback_data = NULL;
 179
 180         return fibptr;
 181 }
 182
 183 /**
 184  *      aac_fib_free    -       free a fib
 185  *      @fibptr: fib to free up
 186  *
 187  *      Frees up a fib and places it on the appropriate queue
 188  */
 189
 190 void aac_fib_free(struct fib *fibptr)
 191 {
 192         unsigned long flags;
 193
 194         spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
 195         if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 196                 aac_config.fib_timeouts++;
 197         if (fibptr->hw_fib_va->header.XferState != 0) {
 198                 printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
 199                          (void*)fibptr,
 200                          le32_to_cpu(fibptr->hw_fib_va->header.XferState));
 201         }
 202         fibptr->next = fibptr->dev->free_fib;
 203         fibptr->dev->free_fib = fibptr;
 204         spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
 205 }
 206
 207 /**
 208  *      aac_fib_init    -       initialise a fib
 209  *      @fibptr: The fib to initialize
 210  *
 211  *      Set up the generic fib fields ready for use
 212  */
 213
 214 void aac_fib_init(struct fib *fibptr)
 215 {
 216         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 217
 218         hw_fib->header.StructType = FIB_MAGIC;
 219         hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
 220         hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
 221         hw_fib->header.SenderFibAddress = 0; /* Filled in later if needed */
 222         hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
 223         hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
 224 }
 225
 226 /**
 227  *      fib_deallocate          -       deallocate a fib
 228  *      @fibptr: fib to deallocate
 229  *
 230  *      Will deallocate and return to the free pool the FIB pointed to by the
 231  *      caller.
 232  */
 233
 234 static void fib_dealloc(struct fib * fibptr)
 235 {
 236         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 237         BUG_ON(hw_fib->header.StructType != FIB_MAGIC);
 238         hw_fib->header.XferState = 0;
 239 }
 240
 241 /*
 242  *      Commuication primitives define and support the queuing method we use to
 243  *      support host to adapter commuication. All queue accesses happen through
 244  *      these routines and are the only routines which have a knowledge of the
 245  *       how these queues are implemented.
 246  */
 247
 248 /**
 249  *      aac_get_entry           -       get a queue entry
 250  *      @dev: Adapter
 251  *      @qid: Queue Number
 252  *      @entry: Entry return
 253  *      @index: Index return
 254  *      @nonotify: notification control
 255  *
 256  *      With a priority the routine returns a queue entry if the queue has free entries. If the queue
 257  *      is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is
 258  *      returned.
 259  */
 260
 261 static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify)
 262 {
 263         struct aac_queue * q;
 264         unsigned long idx;
 265
 266         /*
 267          *      All of the queues wrap when they reach the end, so we check
 268          *      to see if they have reached the end and if they have we just
 269          *      set the index back to zero. This is a wrap. You could or off
 270          *      the high bits in all updates but this is a bit faster I think.
 271          */
 272
 273         q = &dev->queues->queue[qid];
 274
 275         idx = *index = le32_to_cpu(*(q->headers.producer));
 276         /* Interrupt Moderation, only interrupt for first two entries */
 277         if (idx != le32_to_cpu(*(q->headers.consumer))) {
 278                 if (--idx == 0) {
 279                         if (qid == AdapNormCmdQueue)
 280                                 idx = ADAP_NORM_CMD_ENTRIES;
 281                         else
 282                                 idx = ADAP_NORM_RESP_ENTRIES;
 283                 }
 284                 if (idx != le32_to_cpu(*(q->headers.consumer)))
 285                         *nonotify = 1;
 286         }
 287
 288         if (qid == AdapNormCmdQueue) {
 289                 if (*index >= ADAP_NORM_CMD_ENTRIES)
 290                         *index = 0; /* Wrap to front of the Producer Queue. */
 291         } else {
 292                 if (*index >= ADAP_NORM_RESP_ENTRIES)
 293                         *index = 0; /* Wrap to front of the Producer Queue. */
 294         }
 295
 296         /* Queue is full */
 297         if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) {
 298                 printk(KERN_WARNING "Queue %d full, %u outstanding.\n",
 299                                 qid, q->numpending);
 300                 return 0;
 301         } else {
 302                 *entry = q->base + *index;
 303                 return 1;
 304         }
 305 }
 306
 307 /**
 308  *      aac_queue_get           -       get the next free QE
 309  *      @dev: Adapter
 310  *      @index: Returned index
 311  *      @priority: Priority of fib
 312  *      @fib: Fib to associate with the queue entry
 313  *      @wait: Wait if queue full
 314  *      @fibptr: Driver fib object to go with fib
 315  *      @nonotify: Don't notify the adapter
 316  *
 317  *      Gets the next free QE off the requested priorty adapter command
 318  *      queue and associates the Fib with the QE. The QE represented by
 319  *      index is ready to insert on the queue when this routine returns
 320  *      success.
 321  */
 322
 323 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
 324 {
 325         struct aac_entry * entry = NULL;
 326         int map = 0;
 327
 328         if (qid == AdapNormCmdQueue) {
 329                 /*  if no entries wait for some if caller wants to */
 330                 while (!aac_get_entry(dev, qid, &entry, index, nonotify)) {
 331                         printk(KERN_ERR "GetEntries failed\n");
 332                 }
 333                 /*
 334                  *      Setup queue entry with a command, status and fib mapped
 335                  */
 336                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 337                 map = 1;
 338         } else {
 339                 while (!aac_get_entry(dev, qid, &entry, index, nonotify)) {
 340                         /* if no entries wait for some if caller wants to */
 341                 }
 342                 /*
 343                  *      Setup queue entry with command, status and fib mapped
 344                  */
 345                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 346                 entry->addr = hw_fib->header.SenderFibAddress;
 347                         /* Restore adapters pointer to the FIB */
 348                 hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress;    /* Let the adapter now where to find its data */
 349                 map = 0;
 350         }
 351         /*
 352          *      If MapFib is true than we need to map the Fib and put pointers
 353          *      in the queue entry.
 354          */
 355         if (map)
 356                 entry->addr = cpu_to_le32(fibptr->hw_fib_pa);
 357         return 0;
 358 }
 359
 360 /*
 361  *      Define the highest level of host to adapter communication routines.
 362  *      These routines will support host to adapter FS commuication. These
 363  *      routines have no knowledge of the commuication method used. This level
 364  *      sends and receives FIBs. This level has no knowledge of how these FIBs
 365  *      get passed back and forth.
 366  */
 367
 368 /**
 369  *      aac_fib_send    -       send a fib to the adapter
 370  *      @command: Command to send
 371  *      @fibptr: The fib
 372  *      @size: Size of fib data area
 373  *      @priority: Priority of Fib
 374  *      @wait: Async/sync select
 375  *      @reply: True if a reply is wanted
 376  *      @callback: Called with reply
 377  *      @callback_data: Passed to callback
 378  *
 379  *      Sends the requested FIB to the adapter and optionally will wait for a
 380  *      response FIB. If the caller does not wish to wait for a response than
 381  *      an event to wait on must be supplied. This event will be set when a
 382  *      response FIB is received from the adapter.
 383  */
 384
 385 int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 386                 int priority, int wait, int reply, fib_callback callback,
 387                 void *callback_data)
 388 {
 389         struct aac_dev * dev = fibptr->dev;
 390         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 391         unsigned long flags = 0;
 392         unsigned long qflags;
 393
 394         if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 395                 return -EBUSY;
 396         /*
 397          *      There are 5 cases with the wait and reponse requested flags.
 398          *      The only invalid cases are if the caller requests to wait and
 399          *      does not request a response and if the caller does not want a
 400          *      response and the Fib is not allocated from pool. If a response
 401          *      is not requesed the Fib will just be deallocaed by the DPC
 402          *      routine when the response comes back from the adapter. No
 403          *      further processing will be done besides deleting the Fib. We
 404          *      will have a debug mode where the adapter can notify the host
 405          *      it had a problem and the host can log that fact.
 406          */
 407         fibptr->flags = 0;
 408         if (wait && !reply) {
 409                 return -EINVAL;
 410         } else if (!wait && reply) {
 411                 hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected);
 412                 FIB_COUNTER_INCREMENT(aac_config.AsyncSent);
 413         } else if (!wait && !reply) {
 414                 hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected);
 415                 FIB_COUNTER_INCREMENT(aac_config.NoResponseSent);
 416         } else if (wait && reply) {
 417                 hw_fib->header.XferState |= cpu_to_le32(ResponseExpected);
 418                 FIB_COUNTER_INCREMENT(aac_config.NormalSent);
 419         }
 420         /*
 421          *      Map the fib into 32bits by using the fib number
 422          */
 423
 424         hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr - dev->fibs)) << 2);
 425         hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
 426         /*
 427          *      Set FIB state to indicate where it came from and if we want a
 428          *      response from the adapter. Also load the command from the
 429          *      caller.
 430          *
 431          *      Map the hw fib pointer as a 32bit value
 432          */
 433         hw_fib->header.Command = cpu_to_le16(command);
 434         hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
 435         fibptr->hw_fib_va->header.Flags = 0;    /* 0 the flags field - internal only*/
 436         /*
 437          *      Set the size of the Fib we want to send to the adapter
 438          */
 439         hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size);
 440         if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) {
 441                 return -EMSGSIZE;
 442         }
 443         /*
 444          *      Get a queue entry connect the FIB to it and send an notify
 445          *      the adapter a command is ready.
 446          */
 447         hw_fib->header.XferState |= cpu_to_le32(NormalPriority);
 448
 449         /*
 450          *      Fill in the Callback and CallbackContext if we are not
 451          *      going to wait.
 452          */
 453         if (!wait) {
 454                 fibptr->callback = callback;
 455                 fibptr->callback_data = callback_data;
 456                 fibptr->flags = FIB_CONTEXT_FLAG;
 457         }
 458
 459         fibptr->done = 0;
 460
 461         FIB_COUNTER_INCREMENT(aac_config.FibsSent);
 462
 463         dprintk((KERN_DEBUG "Fib contents:.\n"));
 464         dprintk((KERN_DEBUG "  Command =               %d.\n", le32_to_cpu(hw_fib->header.Command)));
 465         dprintk((KERN_DEBUG "  SubCommand =            %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
 466         dprintk((KERN_DEBUG "  XferState  =            %x.\n", le32_to_cpu(hw_fib->header.XferState)));
 467         dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib_va));
 468         dprintk((KERN_DEBUG "  hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
 469         dprintk((KERN_DEBUG "  fib being sent=%p\n",fibptr));
 470
 471         if (!dev->queues)
 472                 return -EBUSY;
 473
 474         if(wait)
 475                 spin_lock_irqsave(&fibptr->event_lock, flags);
 476         aac_adapter_deliver(fibptr);
 477
 478         /*
 479          *      If the caller wanted us to wait for response wait now.
 480          */
 481
 482         if (wait) {
 483                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 484                 /* Only set for first known interruptable command */
 485                 if (wait < 0) {
 486                         /*
 487                          * *VERY* Dangerous to time out a command, the
 488                          * assumption is made that we have no hope of
 489                          * functioning because an interrupt routing or other
 490                          * hardware failure has occurred.
 491                          */
 492                         unsigned long count = 36000000L; /* 3 minutes */
 493                         while (down_trylock(&fibptr->event_wait)) {
 494                                 int blink;
 495                                 if (--count == 0) {
 496                                         struct aac_queue * q = &dev->queues->queue[AdapNormCmdQueue];
 497                                         spin_lock_irqsave(q->lock, qflags);
 498                                         q->numpending--;
 499                                         spin_unlock_irqrestore(q->lock, qflags);
 500                                         if (wait == -1) {
 501                                                 printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n"
 502                                                   "Usually a result of a PCI interrupt routing problem;\n"
 503                                                   "update mother board BIOS or consider utilizing one of\n"
 504                                                   "the SAFE mode kernel options (acpi, apic etc)\n");
 505                                         }
 506                                         return -ETIMEDOUT;
 507                                 }
 508                                 if ((blink = aac_adapter_check_health(dev)) > 0) {
 509                                         if (wait == -1) {
 510                                                 printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n"
 511                                                   "Usually a result of a serious unrecoverable hardware problem\n",
 512                                                   blink);
 513                                         }
 514                                         return -EFAULT;
 515                                 }
 516                                 udelay(5);
 517                         }
 518                 } else
 519                         (void)down_interruptible(&fibptr->event_wait);
 520                 spin_lock_irqsave(&fibptr->event_lock, flags);
 521                 if (fibptr->done == 0) {
 522                         fibptr->done = 2; /* Tell interrupt we aborted */
 523                         spin_unlock_irqrestore(&fibptr->event_lock, flags);
 524                         return -EINTR;
 525                 }
 526                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 527                 BUG_ON(fibptr->done == 0);
 528
 529                 if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 530                         return -ETIMEDOUT;
 531                 return 0;
 532         }
 533         /*
 534          *      If the user does not want a response than return success otherwise
 535          *      return pending
 536          */
 537         if (reply)
 538                 return -EINPROGRESS;
 539         else
 540                 return 0;
 541 }
 542
 543 /**
 544  *      aac_consumer_get        -       get the top of the queue
 545  *      @dev: Adapter
 546  *      @q: Queue
 547  *      @entry: Return entry
 548  *
 549  *      Will return a pointer to the entry on the top of the queue requested that
 550  *      we are a consumer of, and return the address of the queue entry. It does
 551  *      not change the state of the queue.
 552  */
 553
 554 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry)
 555 {
 556         u32 index;
 557         int status;
 558         if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) {
 559                 status = 0;
 560         } else {
 561                 /*
 562                  *      The consumer index must be wrapped if we have reached
 563                  *      the end of the queue, else we just use the entry
 564                  *      pointed to by the header index
 565                  */
 566                 if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 567                         index = 0;
 568                 else
 569                         index = le32_to_cpu(*q->headers.consumer);
 570                 *entry = q->base + index;
 571                 status = 1;
 572         }
 573         return(status);
 574 }
 575
 576 /**
 577  *      aac_consumer_free       -       free consumer entry
 578  *      @dev: Adapter
 579  *      @q: Queue
 580  *      @qid: Queue ident
 581  *
 582  *      Frees up the current top of the queue we are a consumer of. If the
 583  *      queue was full notify the producer that the queue is no longer full.
 584  */
 585
 586 void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
 587 {
 588         int wasfull = 0;
 589         u32 notify;
 590
 591         if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer))
 592                 wasfull = 1;
 593
 594         if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 595                 *q->headers.consumer = cpu_to_le32(1);
 596         else
 597                 *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1);
 598
 599         if (wasfull) {
 600                 switch (qid) {
 601
 602                 case HostNormCmdQueue:
 603                         notify = HostNormCmdNotFull;
 604                         break;
 605                 case HostNormRespQueue:
 606                         notify = HostNormRespNotFull;
 607                         break;
 608                 default:
 609                         BUG();
 610                         return;
 611                 }
 612                 aac_adapter_notify(dev, notify);
 613         }
 614 }
 615
 616 /**
 617  *      aac_fib_adapter_complete        -       complete adapter issued fib
 618  *      @fibptr: fib to complete
 619  *      @size: size of fib
 620  *
 621  *      Will do all necessary work to complete a FIB that was sent from
 622  *      the adapter.
 623  */
 624
 625 int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
 626 {
 627         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 628         struct aac_dev * dev = fibptr->dev;
 629         struct aac_queue * q;
 630         unsigned long nointr = 0;
 631         unsigned long qflags;
 632
 633         if (hw_fib->header.XferState == 0) {
 634                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 635                         kfree (hw_fib);
 636                 return 0;
 637         }
 638         /*
 639          *      If we plan to do anything check the structure type first.
 640          */
 641         if (hw_fib->header.StructType != FIB_MAGIC) {
 642                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 643                         kfree (hw_fib);
 644                 return -EINVAL;
 645         }
 646         /*
 647          *      This block handles the case where the adapter had sent us a
 648          *      command and we have finished processing the command. We
 649          *      call completeFib when we are done processing the command
 650          *      and want to send a response back to the adapter. This will
 651          *      send the completed cdb to the adapter.
 652          */
 653         if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
 654                 if (dev->comm_interface == AAC_COMM_MESSAGE) {
 655                         kfree (hw_fib);
 656                 } else {
 657                         u32 index;
 658                         hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
 659                         if (size) {
 660                                 size += sizeof(struct aac_fibhdr);
 661                                 if (size > le16_to_cpu(hw_fib->header.SenderSize))
 662                                         return -EMSGSIZE;
 663                                 hw_fib->header.Size = cpu_to_le16(size);
 664                         }
 665                         q = &dev->queues->queue[AdapNormRespQueue];
 666                         spin_lock_irqsave(q->lock, qflags);
 667                         aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
 668                         *(q->headers.producer) = cpu_to_le32(index + 1);
 669                         spin_unlock_irqrestore(q->lock, qflags);
 670                         if (!(nointr & (int)aac_config.irq_mod))
 671                                 aac_adapter_notify(dev, AdapNormRespQueue);
 672                 }
 673         } else {
 674                 printk(KERN_WARNING "aac_fib_adapter_complete: "
 675                         "Unknown xferstate detected.\n");
 676                 BUG();
 677         }
 678         return 0;
 679 }
 680
 681 /**
 682  *      aac_fib_complete        -       fib completion handler
 683  *      @fib: FIB to complete
 684  *
 685  *      Will do all necessary work to complete a FIB.
 686  */
 687
 688 int aac_fib_complete(struct fib *fibptr)
 689 {
 690         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 691
 692         /*
 693          *      Check for a fib which has already been completed
 694          */
 695
 696         if (hw_fib->header.XferState == 0)
 697                 return 0;
 698         /*
 699          *      If we plan to do anything check the structure type first.
 700          */
 701
 702         if (hw_fib->header.StructType != FIB_MAGIC)
 703                 return -EINVAL;
 704         /*
 705          *      This block completes a cdb which orginated on the host and we
 706          *      just need to deallocate the cdb or reinit it. At this point the
 707          *      command is complete that we had sent to the adapter and this
 708          *      cdb could be reused.
 709          */
 710         if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
 711                 (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
 712         {
 713                 fib_dealloc(fibptr);
 714         }
 715         else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost))
 716         {
 717                 /*
 718                  *      This handles the case when the host has aborted the I/O
 719                  *      to the adapter because the adapter is not responding
 720                  */
 721                 fib_dealloc(fibptr);
 722         } else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) {
 723                 fib_dealloc(fibptr);
 724         } else {
 725                 BUG();
 726         }
 727         return 0;
 728 }
 729
 730 /**
 731  *      aac_printf      -       handle printf from firmware
 732  *      @dev: Adapter
 733  *      @val: Message info
 734  *
 735  *      Print a message passed to us by the controller firmware on the
 736  *      Adaptec board
 737  */
 738
 739 void aac_printf(struct aac_dev *dev, u32 val)
 740 {
 741         char *cp = dev->printfbuf;
 742         if (dev->printf_enabled)
 743         {
 744                 int length = val & 0xffff;
 745                 int level = (val >> 16) & 0xffff;
 746
 747                 /*
 748                  *      The size of the printfbuf is set in port.c
 749                  *      There is no variable or define for it
 750                  */
 751                 if (length > 255)
 752                         length = 255;
 753                 if (cp[length] != 0)
 754                         cp[length] = 0;
 755                 if (level == LOG_AAC_HIGH_ERROR)
 756                         printk(KERN_WARNING "%s:%s", dev->name, cp);
 757                 else
 758                         printk(KERN_INFO "%s:%s", dev->name, cp);
 759         }
 760         memset(cp, 0, 256);
 761 }
 762
 763
 764 /**
 765  *      aac_handle_aif          -       Handle a message from the firmware
 766  *      @dev: Which adapter this fib is from
 767  *      @fibptr: Pointer to fibptr from adapter
 768  *
 769  *      This routine handles a driver notify fib from the adapter and
 770  *      dispatches it to the appropriate routine for handling.
 771  */
 772
 773 #define AIF_SNIFF_TIMEOUT       (30*HZ)
 774 static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 775 {
 776         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 777         struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
 778         u32 channel, id, lun, container;
 779         struct scsi_device *device;
 780         enum {
 781                 NOTHING,
 782                 DELETE,
 783                 ADD,
 784                 CHANGE
 785         } device_config_needed = NOTHING;
 786
 787         /* Sniff for container changes */
 788
 789         if (!dev || !dev->fsa_dev)
 790                 return;
 791         container = channel = id = lun = (u32)-1;
 792
 793         /*
 794          *      We have set this up to try and minimize the number of
 795          * re-configures that take place. As a result of this when
 796          * certain AIF's come in we will set a flag waiting for another
 797          * type of AIF before setting the re-config flag.
 798          */
 799         switch (le32_to_cpu(aifcmd->command)) {
 800         case AifCmdDriverNotify:
 801                 switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) {
 802                 /*
 803                  *      Morph or Expand complete
 804                  */
 805                 case AifDenMorphComplete:
 806                 case AifDenVolumeExtendComplete:
 807                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
 808                         if (container >= dev->maximum_num_containers)
 809                                 break;
 810
 811                         /*
 812                          *      Find the scsi_device associated with the SCSI
 813                          * address. Make sure we have the right array, and if
 814                          * so set the flag to initiate a new re-config once we
 815                          * see an AifEnConfigChange AIF come through.
 816                          */
 817
 818                         if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) {
 819                                 device = scsi_device_lookup(dev->scsi_host_ptr,
 820                                         CONTAINER_TO_CHANNEL(container),
 821                                         CONTAINER_TO_ID(container),
 822                                         CONTAINER_TO_LUN(container));
 823                                 if (device) {
 824                                         dev->fsa_dev[container].config_needed = CHANGE;
 825                                         dev->fsa_dev[container].config_waiting_on = AifEnConfigChange;
 826                                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 827                                         scsi_device_put(device);
 828                                 }
 829                         }
 830                 }
 831
 832                 /*
 833                  *      If we are waiting on something and this happens to be
 834                  * that thing then set the re-configure flag.
 835                  */
 836                 if (container != (u32)-1) {
 837                         if (container >= dev->maximum_num_containers)
 838                                 break;
 839                         if ((dev->fsa_dev[container].config_waiting_on ==
 840                             le32_to_cpu(*(__le32 *)aifcmd->data)) &&
 841                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 842                                 dev->fsa_dev[container].config_waiting_on = 0;
 843                 } else for (container = 0;
 844                     container < dev->maximum_num_containers; ++container) {
 845                         if ((dev->fsa_dev[container].config_waiting_on ==
 846                             le32_to_cpu(*(__le32 *)aifcmd->data)) &&
 847                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 848                                 dev->fsa_dev[container].config_waiting_on = 0;
 849                 }
 850                 break;
 851
 852         case AifCmdEventNotify:
 853                 switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) {
 854                 case AifEnBatteryEvent:
 855                         dev->cache_protected =
 856                                 (((__le32 *)aifcmd->data)[1] == cpu_to_le32(3));
 857                         break;
 858                 /*
 859                  *      Add an Array.
 860                  */
 861                 case AifEnAddContainer:
 862                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
 863                         if (container >= dev->maximum_num_containers)
 864                                 break;
 865                         dev->fsa_dev[container].config_needed = ADD;
 866                         dev->fsa_dev[container].config_waiting_on =
 867                                 AifEnConfigChange;
 868                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 869                         break;
 870
 871                 /*
 872                  *      Delete an Array.
 873                  */
 874                 case AifEnDeleteContainer:
 875                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
 876                         if (container >= dev->maximum_num_containers)
 877                                 break;
 878                         dev->fsa_dev[container].config_needed = DELETE;
 879                         dev->fsa_dev[container].config_waiting_on =
 880                                 AifEnConfigChange;
 881                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 882                         break;
 883
 884                 /*
 885                  *      Container change detected. If we currently are not
 886                  * waiting on something else, setup to wait on a Config Change.
 887                  */
 888                 case AifEnContainerChange:
 889                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
 890                         if (container >= dev->maximum_num_containers)
 891                                 break;
 892                         if (dev->fsa_dev[container].config_waiting_on &&
 893                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 894                                 break;
 895                         dev->fsa_dev[container].config_needed = CHANGE;
 896                         dev->fsa_dev[container].config_waiting_on =
 897                                 AifEnConfigChange;
 898                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 899                         break;
 900
 901                 case AifEnConfigChange:
 902                         break;
 903
 904                 case AifEnAddJBOD:
 905                 case AifEnDeleteJBOD:
 906                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
 907                         if ((container >> 28))
 908                                 break;
 909                         channel = (container >> 24) & 0xF;
 910                         if (channel >= dev->maximum_num_channels)
 911                                 break;
 912                         id = container & 0xFFFF;
 913                         if (id >= dev->maximum_num_physicals)
 914                                 break;
 915                         lun = (container >> 16) & 0xFF;
 916                         channel = aac_phys_to_logical(channel);
 917                         device_config_needed =
 918                           (((__le32 *)aifcmd->data)[0] ==
 919                             cpu_to_le32(AifEnAddJBOD)) ? ADD : DELETE;
 920                         break;
 921
 922                 case AifEnEnclosureManagement:
 923                         /*
 924                          * If in JBOD mode, automatic exposure of new
 925                          * physical target to be suppressed until configured.
 926                          */
 927                         if (dev->jbod)
 928                                 break;
 929                         switch (le32_to_cpu(((__le32 *)aifcmd->data)[3])) {
 930                         case EM_DRIVE_INSERTION:
 931                         case EM_DRIVE_REMOVAL:
 932                                 container = le32_to_cpu(
 933                                         ((__le32 *)aifcmd->data)[2]);
 934                                 if ((container >> 28))
 935                                         break;
 936                                 channel = (container >> 24) & 0xF;
 937                                 if (channel >= dev->maximum_num_channels)
 938                                         break;
 939                                 id = container & 0xFFFF;
 940                                 lun = (container >> 16) & 0xFF;
 941                                 if (id >= dev->maximum_num_physicals) {
 942                                         /* legacy dev_t ? */
 943                                         if ((0x2000 <= id) || lun || channel ||
 944                                           ((channel = (id >> 7) & 0x3F) >=
 945                                           dev->maximum_num_channels))
 946                                                 break;
 947                                         lun = (id >> 4) & 7;
 948                                         id &= 0xF;
 949                                 }
 950                                 channel = aac_phys_to_logical(channel);
 951                                 device_config_needed =
 952                                   (((__le32 *)aifcmd->data)[3]
 953                                     == cpu_to_le32(EM_DRIVE_INSERTION)) ?
 954                                   ADD : DELETE;
 955                                 break;
 956                         }
 957                         break;
 958                 }
 959
 960                 /*
 961                  *      If we are waiting on something and this happens to be
 962                  * that thing then set the re-configure flag.
 963                  */
 964                 if (container != (u32)-1) {
 965                         if (container >= dev->maximum_num_containers)
 966                                 break;
 967                         if ((dev->fsa_dev[container].config_waiting_on ==
 968                             le32_to_cpu(*(__le32 *)aifcmd->data)) &&
 969                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 970                                 dev->fsa_dev[container].config_waiting_on = 0;
 971                 } else for (container = 0;
 972                     container < dev->maximum_num_containers; ++container) {
 973                         if ((dev->fsa_dev[container].config_waiting_on ==
 974                             le32_to_cpu(*(__le32 *)aifcmd->data)) &&
 975                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 976                                 dev->fsa_dev[container].config_waiting_on = 0;
 977                 }
 978                 break;
 979
 980         case AifCmdJobProgress:
 981                 /*
 982                  *      These are job progress AIF's. When a Clear is being
 983                  * done on a container it is initially created then hidden from
 984                  * the OS. When the clear completes we don't get a config
 985                  * change so we monitor the job status complete on a clear then
 986                  * wait for a container change.
 987                  */
 988
 989                 if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) &&
 990                     (((__le32 *)aifcmd->data)[6] == ((__le32 *)aifcmd->data)[5] ||
 991                      ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess))) {
 992                         for (container = 0;
 993                             container < dev->maximum_num_containers;
 994                             ++container) {
 995                                 /*
 996                                  * Stomp on all config sequencing for all
 997                                  * containers?
 998                                  */
 999                                 dev->fsa_dev[container].config_waiting_on =
1000                                         AifEnContainerChange;
1001                                 dev->fsa_dev[container].config_needed = ADD;
1002                                 dev->fsa_dev[container].config_waiting_stamp =
1003                                         jiffies;
1004                         }
1005                 }
1006                 if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) &&
1007                     ((__le32 *)aifcmd->data)[6] == 0 &&
1008                     ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning)) {
1009                         for (container = 0;
1010                             container < dev->maximum_num_containers;
1011                             ++container) {
1012                                 /*
1013                                  * Stomp on all config sequencing for all
1014                                  * containers?
1015                                  */
1016                                 dev->fsa_dev[container].config_waiting_on =
1017                                         AifEnContainerChange;
1018                                 dev->fsa_dev[container].config_needed = DELETE;
1019                                 dev->fsa_dev[container].config_waiting_stamp =
1020                                         jiffies;
1021                         }
1022                 }
1023                 break;
1024         }
1025
1026         if (device_config_needed == NOTHING)
1027         for (container = 0; container < dev->maximum_num_containers;
1028             ++container) {
1029                 if ((dev->fsa_dev[container].config_waiting_on == 0) &&
1030                         (dev->fsa_dev[container].config_needed != NOTHING) &&
1031                         time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
1032                         device_config_needed =
1033                                 dev->fsa_dev[container].config_needed;
1034                         dev->fsa_dev[container].config_needed = NOTHING;
1035                         channel = CONTAINER_TO_CHANNEL(container);
1036                         id = CONTAINER_TO_ID(container);
1037                         lun = CONTAINER_TO_LUN(container);
1038                         break;
1039                 }
1040         }
1041         if (device_config_needed == NOTHING)
1042                 return;
1043
1044         /*
1045          *      If we decided that a re-configuration needs to be done,
1046          * schedule it here on the way out the door, please close the door
1047          * behind you.
1048          */
1049
1050         /*
1051          *      Find the scsi_device associated with the SCSI address,
1052          * and mark it as changed, invalidating the cache. This deals
1053          * with changes to existing device IDs.
1054          */
1055
1056         if (!dev || !dev->scsi_host_ptr)
1057                 return;
1058         /*
1059          * force reload of disk info via aac_probe_container
1060          */
1061         if ((channel == CONTAINER_CHANNEL) &&
1062           (device_config_needed != NOTHING)) {
1063                 if (dev->fsa_dev[container].valid == 1)
1064                         dev->fsa_dev[container].valid = 2;
1065                 aac_probe_container(dev, container);
1066         }
1067         device = scsi_device_lookup(dev->scsi_host_ptr, channel, id, lun);
1068         if (device) {
1069                 switch (device_config_needed) {
1070                 case DELETE:
1071                         if (scsi_device_online(device)) {
1072                                 scsi_device_set_state(device, SDEV_OFFLINE);
1073                                 sdev_printk(KERN_INFO, device,
1074                                         "Device offlined - %s\n",
1075                                         (channel == CONTAINER_CHANNEL) ?
1076                                                 "array deleted" :
1077                                                 "enclosure services event");
1078                         }
1079                         break;
1080                 case ADD:
1081                         if (!scsi_device_online(device)) {
1082                                 sdev_printk(KERN_INFO, device,
1083                                         "Device online - %s\n",
1084                                         (channel == CONTAINER_CHANNEL) ?
1085                                                 "array created" :
1086                                                 "enclosure services event");
1087                                 scsi_device_set_state(device, SDEV_RUNNING);
1088                         }
1089                         /* FALLTHRU */
1090                 case CHANGE:
1091                         if ((channel == CONTAINER_CHANNEL)
1092                          && (!dev->fsa_dev[container].valid)) {
1093                                 if (!scsi_device_online(device))
1094                                         break;
1095                                 scsi_device_set_state(device, SDEV_OFFLINE);
1096                                 sdev_printk(KERN_INFO, device,
1097                                         "Device offlined - %s\n",
1098                                         "array failed");
1099                                 break;
1100                         }
1101                         scsi_rescan_device(&device->sdev_gendev);
1102
1103                 default:
1104                         break;
1105                 }
1106                 scsi_device_put(device);
1107                 device_config_needed = NOTHING;
1108         }
1109         if (device_config_needed == ADD)
1110                 scsi_add_device(dev->scsi_host_ptr, channel, id, lun);
1111 }
1112
1113 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
1114 {
1115         int index, quirks;
1116         int retval;
1117         struct Scsi_Host *host;
1118         struct scsi_device *dev;
1119         struct scsi_cmnd *command;
1120         struct scsi_cmnd *command_list;
1121         int jafo = 0;
1122
1123         /*
1124          * Assumptions:
1125          *      - host is locked, unless called by the aacraid thread.
1126          *        (a matter of convenience, due to legacy issues surrounding
1127          *        eh_host_adapter_reset).
1128          *      - in_reset is asserted, so no new i/o is getting to the
1129          *        card.
1130          *      - The card is dead, or will be very shortly ;-/ so no new
1131          *        commands are completing in the interrupt service.
1132          */
1133         host = aac->scsi_host_ptr;
1134         scsi_block_requests(host);
1135         aac_adapter_disable_int(aac);
1136         if (aac->thread->pid != current->pid) {
1137                 spin_unlock_irq(host->host_lock);
1138                 kthread_stop(aac->thread);
1139                 jafo = 1;
1140         }
1141
1142         /*
1143          *      If a positive health, means in a known DEAD PANIC
1144          * state and the adapter could be reset to `try again'.
1145          */
1146         retval = aac_adapter_restart(aac, forced ? 0 : aac_adapter_check_health(aac));
1147
1148         if (retval)
1149                 goto out;
1150
1151         /*
1152          *      Loop through the fibs, close the synchronous FIBS
1153          */
1154         for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
1155                 struct fib *fib = &aac->fibs[index];
1156                 if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
1157                   (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
1158                         unsigned long flagv;
1159                         spin_lock_irqsave(&fib->event_lock, flagv);
1160                         up(&fib->event_wait);
1161                         spin_unlock_irqrestore(&fib->event_lock, flagv);
1162                         schedule();
1163                         retval = 0;
1164                 }
1165         }
1166         /* Give some extra time for ioctls to complete. */
1167         if (retval == 0)
1168                 ssleep(2);
1169         index = aac->cardtype;
1170
1171         /*
1172          * Re-initialize the adapter, first free resources, then carefully
1173          * apply the initialization sequence to come back again. Only risk
1174          * is a change in Firmware dropping cache, it is assumed the caller
1175          * will ensure that i/o is queisced and the card is flushed in that
1176          * case.
1177          */
1178         aac_fib_map_free(aac);
1179         pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
1180         aac->comm_addr = NULL;
1181         aac->comm_phys = 0;
1182         kfree(aac->queues);
1183         aac->queues = NULL;
1184         free_irq(aac->pdev->irq, aac);
1185         kfree(aac->fsa_dev);
1186         aac->fsa_dev = NULL;
1187         quirks = aac_get_driver_ident(index)->quirks;
1188         if (quirks & AAC_QUIRK_31BIT) {
1189                 if (((retval = pci_set_dma_mask(aac->pdev, DMA_31BIT_MASK))) ||
1190                   ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_31BIT_MASK))))
1191                         goto out;
1192         } else {
1193                 if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
1194                   ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
1195                         goto out;
1196         }
1197         if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
1198                 goto out;
1199         if (quirks & AAC_QUIRK_31BIT)
1200                 if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
1201                         goto out;
1202         if (jafo) {
1203                 aac->thread = kthread_run(aac_command_thread, aac, aac->name);
1204                 if (IS_ERR(aac->thread)) {
1205                         retval = PTR_ERR(aac->thread);
1206                         goto out;
1207                 }
1208         }
1209         (void)aac_get_adapter_info(aac);
1210         if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
1211                 host->sg_tablesize = 34;
1212                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1213         }
1214         if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
1215                 host->sg_tablesize = 17;
1216                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1217         }
1218         aac_get_config_status(aac, 1);
1219         aac_get_containers(aac);
1220         /*
1221          * This is where the assumption that the Adapter is quiesced
1222          * is important.
1223          */
1224         command_list = NULL;
1225         __shost_for_each_device(dev, host) {
1226                 unsigned long flags;
1227                 spin_lock_irqsave(&dev->list_lock, flags);
1228                 list_for_each_entry(command, &dev->cmd_list, list)
1229                         if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
1230                                 command->SCp.buffer = (struct scatterlist *)command_list;
1231                                 command_list = command;
1232                         }
1233                 spin_unlock_irqrestore(&dev->list_lock, flags);
1234         }
1235         while ((command = command_list)) {
1236                 command_list = (struct scsi_cmnd *)command->SCp.buffer;
1237                 command->SCp.buffer = NULL;
1238                 command->result = DID_OK << 16
1239                   | COMMAND_COMPLETE << 8
1240                   | SAM_STAT_TASK_SET_FULL;
1241                 command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
1242                 command->scsi_done(command);
1243         }
1244         retval = 0;
1245
1246 out:
1247         aac->in_reset = 0;
1248         scsi_unblock_requests(host);
1249         if (jafo) {
1250                 spin_lock_irq(host->host_lock);
1251         }
1252         return retval;
1253 }
1254
1255 int aac_reset_adapter(struct aac_dev * aac, int forced)
1256 {
1257         unsigned long flagv = 0;
1258         int retval;
1259         struct Scsi_Host * host;
1260
1261         if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
1262                 return -EBUSY;
1263
1264         if (aac->in_reset) {
1265                 spin_unlock_irqrestore(&aac->fib_lock, flagv);
1266                 return -EBUSY;
1267         }
1268         aac->in_reset = 1;
1269         spin_unlock_irqrestore(&aac->fib_lock, flagv);
1270
1271         /*
1272          * Wait for all commands to complete to this specific
1273          * target (block maximum 60 seconds). Although not necessary,
1274          * it does make us a good storage citizen.
1275          */
1276         host = aac->scsi_host_ptr;
1277         scsi_block_requests(host);
1278         if (forced < 2) for (retval = 60; retval; --retval) {
1279                 struct scsi_device * dev;
1280                 struct scsi_cmnd * command;
1281                 int active = 0;
1282
1283                 __shost_for_each_device(dev, host) {
1284                         spin_lock_irqsave(&dev->list_lock, flagv);
1285                         list_for_each_entry(command, &dev->cmd_list, list) {
1286                                 if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
1287                                         active++;
1288                                         break;
1289                                 }
1290                         }
1291                         spin_unlock_irqrestore(&dev->list_lock, flagv);
1292                         if (active)
1293                                 break;
1294
1295                 }
1296                 /*
1297                  * We can exit If all the commands are complete
1298                  */
1299                 if (active == 0)
1300                         break;
1301                 ssleep(1);
1302         }
1303
1304         /* Quiesce build, flush cache, write through mode */
1305         if (forced < 2)
1306                 aac_send_shutdown(aac);
1307         spin_lock_irqsave(host->host_lock, flagv);
1308         retval = _aac_reset_adapter(aac, forced ? forced : ((aac_check_reset != 0) && (aac_check_reset != 1)));
1309         spin_unlock_irqrestore(host->host_lock, flagv);
1310
1311         if ((forced < 2) && (retval == -ENODEV)) {
1312                 /* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */
1313                 struct fib * fibctx = aac_fib_alloc(aac);
1314                 if (fibctx) {
1315                         struct aac_pause *cmd;
1316                         int status;
1317
1318                         aac_fib_init(fibctx);
1319
1320                         cmd = (struct aac_pause *) fib_data(fibctx);
1321
1322                         cmd->command = cpu_to_le32(VM_ContainerConfig);
1323                         cmd->type = cpu_to_le32(CT_PAUSE_IO);
1324                         cmd->timeout = cpu_to_le32(1);
1325                         cmd->min = cpu_to_le32(1);
1326                         cmd->noRescan = cpu_to_le32(1);
1327                         cmd->count = cpu_to_le32(0);
1328
1329                         status = aac_fib_send(ContainerCommand,
1330                           fibctx,
1331                           sizeof(struct aac_pause),
1332                           FsaNormal,
1333                           -2 /* Timeout silently */, 1,
1334                           NULL, NULL);
1335
1336                         if (status >= 0)
1337                                 aac_fib_complete(fibctx);
1338                         aac_fib_free(fibctx);
1339                 }
1340         }
1341
1342         return retval;
1343 }
1344
1345 int aac_check_health(struct aac_dev * aac)
1346 {
1347         int BlinkLED;
1348         unsigned long time_now, flagv = 0;
1349         struct list_head * entry;
1350         struct Scsi_Host * host;
1351
1352         /* Extending the scope of fib_lock slightly to protect aac->in_reset */
1353         if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
1354                 return 0;
1355
1356         if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
1357                 spin_unlock_irqrestore(&aac->fib_lock, flagv);
1358                 return 0; /* OK */
1359         }
1360
1361         aac->in_reset = 1;
1362
1363         /* Fake up an AIF:
1364          *      aac_aifcmd.command = AifCmdEventNotify = 1
1365          *      aac_aifcmd.seqnum = 0xFFFFFFFF
1366          *      aac_aifcmd.data[0] = AifEnExpEvent = 23
1367          *      aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
1368          *      aac.aifcmd.data[2] = AifHighPriority = 3
1369          *      aac.aifcmd.data[3] = BlinkLED
1370          */
1371
1372         time_now = jiffies/HZ;
1373         entry = aac->fib_list.next;
1374
1375         /*
1376          * For each Context that is on the
1377          * fibctxList, make a copy of the
1378          * fib, and then set the event to wake up the
1379          * thread that is waiting for it.
1380          */
1381         while (entry != &aac->fib_list) {
1382                 /*
1383                  * Extract the fibctx
1384                  */
1385                 struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
1386                 struct hw_fib * hw_fib;
1387                 struct fib * fib;
1388                 /*
1389                  * Check if the queue is getting
1390                  * backlogged
1391                  */
1392                 if (fibctx->count > 20) {
1393                         /*
1394                          * It's *not* jiffies folks,
1395                          * but jiffies / HZ, so do not
1396                          * panic ...
1397                          */
1398                         u32 time_last = fibctx->jiffies;
1399                         /*
1400                          * Has it been > 2 minutes
1401                          * since the last read off
1402                          * the queue?
1403                          */
1404                         if ((time_now - time_last) > aif_timeout) {
1405                                 entry = entry->next;
1406                                 aac_close_fib_context(aac, fibctx);
1407                                 continue;
1408                         }
1409                 }
1410                 /*
1411                  * Warning: no sleep allowed while
1412                  * holding spinlock
1413                  */
1414                 hw_fib = kzalloc(sizeof(struct hw_fib), GFP_ATOMIC);
1415                 fib = kzalloc(sizeof(struct fib), GFP_ATOMIC);
1416                 if (fib && hw_fib) {
1417                         struct aac_aifcmd * aif;
1418
1419                         fib->hw_fib_va = hw_fib;
1420                         fib->dev = aac;
1421                         aac_fib_init(fib);
1422                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1423                         fib->size = sizeof (struct fib);
1424                         fib->data = hw_fib->data;
1425                         aif = (struct aac_aifcmd *)hw_fib->data;
1426                         aif->command = cpu_to_le32(AifCmdEventNotify);
1427                         aif->seqnum = cpu_to_le32(0xFFFFFFFF);
1428                         ((__le32 *)aif->data)[0] = cpu_to_le32(AifEnExpEvent);
1429                         ((__le32 *)aif->data)[1] = cpu_to_le32(AifExeFirmwarePanic);
1430                         ((__le32 *)aif->data)[2] = cpu_to_le32(AifHighPriority);
1431                         ((__le32 *)aif->data)[3] = cpu_to_le32(BlinkLED);
1432
1433                         /*
1434                          * Put the FIB onto the
1435                          * fibctx's fibs
1436                          */
1437                         list_add_tail(&fib->fiblink, &fibctx->fib_list);
1438                         fibctx->count++;
1439                         /*
1440                          * Set the event to wake up the
1441                          * thread that will waiting.
1442                          */
1443                         up(&fibctx->wait_sem);
1444                 } else {
1445                         printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1446                         kfree(fib);
1447                         kfree(hw_fib);
1448                 }
1449                 entry = entry->next;
1450         }
1451
1452         spin_unlock_irqrestore(&aac->fib_lock, flagv);
1453
1454         if (BlinkLED < 0) {
1455                 printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
1456                 goto out;
1457         }
1458
1459         printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
1460
1461         if (!aac_check_reset || ((aac_check_reset != 1) &&
1462                 (aac->supplement_adapter_info.SupportedOptions2 &
1463                         AAC_OPTION_IGNORE_RESET)))
1464                 goto out;
1465         host = aac->scsi_host_ptr;
1466         if (aac->thread->pid != current->pid)
1467                 spin_lock_irqsave(host->host_lock, flagv);
1468         BlinkLED = _aac_reset_adapter(aac, aac_check_reset != 1);
1469         if (aac->thread->pid != current->pid)
1470                 spin_unlock_irqrestore(host->host_lock, flagv);
1471         return BlinkLED;
1472
1473 out:
1474         aac->in_reset = 0;
1475         return BlinkLED;
1476 }
1477
1478
1479 /**
1480  *      aac_command_thread      -       command processing thread
1481  *      @dev: Adapter to monitor
1482  *
1483  *      Waits on the commandready event in it's queue. When the event gets set
1484  *      it will pull FIBs off it's queue. It will continue to pull FIBs off
1485  *      until the queue is empty. When the queue is empty it will wait for
1486  *      more FIBs.
1487  */
1488
1489 int aac_command_thread(void *data)
1490 {
1491         struct aac_dev *dev = data;
1492         struct hw_fib *hw_fib, *hw_newfib;
1493         struct fib *fib, *newfib;
1494         struct aac_fib_context *fibctx;
1495         unsigned long flags;
1496         DECLARE_WAITQUEUE(wait, current);
1497         unsigned long next_jiffies = jiffies + HZ;
1498         unsigned long next_check_jiffies = next_jiffies;
1499         long difference = HZ;
1500
1501         /*
1502          *      We can only have one thread per adapter for AIF's.
1503          */
1504         if (dev->aif_thread)
1505                 return -EINVAL;
1506
1507         /*
1508          *      Let the DPC know it has a place to send the AIF's to.
1509          */
1510         dev->aif_thread = 1;
1511         add_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1512         set_current_state(TASK_INTERRUPTIBLE);
1513         dprintk ((KERN_INFO "aac_command_thread start\n"));
1514         while (1) {
1515                 spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1516                 while(!list_empty(&(dev->queues->queue[HostNormCmdQueue].cmdq))) {
1517                         struct list_head *entry;
1518                         struct aac_aifcmd * aifcmd;
1519
1520                         set_current_state(TASK_RUNNING);
1521
1522                         entry = dev->queues->queue[HostNormCmdQueue].cmdq.next;
1523                         list_del(entry);
1524
1525                         spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1526                         fib = list_entry(entry, struct fib, fiblink);
1527                         /*
1528                          *      We will process the FIB here or pass it to a
1529                          *      worker thread that is TBD. We Really can't
1530                          *      do anything at this point since we don't have
1531                          *      anything defined for this thread to do.
1532                          */
1533                         hw_fib = fib->hw_fib_va;
1534                         memset(fib, 0, sizeof(struct fib));
1535                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1536                         fib->size = sizeof(struct fib);
1537                         fib->hw_fib_va = hw_fib;
1538                         fib->data = hw_fib->data;
1539                         fib->dev = dev;
1540                         /*
1541                          *      We only handle AifRequest fibs from the adapter.
1542                          */
1543                         aifcmd = (struct aac_aifcmd *) hw_fib->data;
1544                         if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
1545                                 /* Handle Driver Notify Events */
1546                                 aac_handle_aif(dev, fib);
1547                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1548                                 aac_fib_adapter_complete(fib, (u16)sizeof(u32));
1549                         } else {
1550                                 /* The u32 here is important and intended. We are using
1551                                    32bit wrapping time to fit the adapter field */
1552
1553                                 u32 time_now, time_last;
1554                                 unsigned long flagv;
1555                                 unsigned num;
1556                                 struct hw_fib ** hw_fib_pool, ** hw_fib_p;
1557                                 struct fib ** fib_pool, ** fib_p;
1558
1559                                 /* Sniff events */
1560                                 if ((aifcmd->command ==
1561                                      cpu_to_le32(AifCmdEventNotify)) ||
1562                                     (aifcmd->command ==
1563                                      cpu_to_le32(AifCmdJobProgress))) {
1564                                         aac_handle_aif(dev, fib);
1565                                 }
1566
1567                                 time_now = jiffies/HZ;
1568
1569                                 /*
1570                                  * Warning: no sleep allowed while
1571                                  * holding spinlock. We take the estimate
1572                                  * and pre-allocate a set of fibs outside the
1573                                  * lock.
1574                                  */
1575                                 num = le32_to_cpu(dev->init->AdapterFibsSize)
1576                                     / sizeof(struct hw_fib); /* some extra */
1577                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1578                                 entry = dev->fib_list.next;
1579                                 while (entry != &dev->fib_list) {
1580                                         entry = entry->next;
1581                                         ++num;
1582                                 }
1583                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1584                                 hw_fib_pool = NULL;
1585                                 fib_pool = NULL;
1586                                 if (num
1587                                  && ((hw_fib_pool = kmalloc(sizeof(struct hw_fib *) * num, GFP_KERNEL)))
1588                                  && ((fib_pool = kmalloc(sizeof(struct fib *) * num, GFP_KERNEL)))) {
1589                                         hw_fib_p = hw_fib_pool;
1590                                         fib_p = fib_pool;
1591                                         while (hw_fib_p < &hw_fib_pool[num]) {
1592                                                 if (!(*(hw_fib_p++) = kmalloc(sizeof(struct hw_fib), GFP_KERNEL))) {
1593                                                         --hw_fib_p;
1594                                                         break;
1595                                                 }
1596                                                 if (!(*(fib_p++) = kmalloc(sizeof(struct fib), GFP_KERNEL))) {
1597                                                         kfree(*(--hw_fib_p));
1598                                                         break;
1599                                                 }
1600                                         }
1601                                         if ((num = hw_fib_p - hw_fib_pool) == 0) {
1602                                                 kfree(fib_pool);
1603                                                 fib_pool = NULL;
1604                                                 kfree(hw_fib_pool);
1605                                                 hw_fib_pool = NULL;
1606                                         }
1607                                 } else {
1608                                         kfree(hw_fib_pool);
1609                                         hw_fib_pool = NULL;
1610                                 }
1611                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1612                                 entry = dev->fib_list.next;
1613                                 /*
1614                                  * For each Context that is on the
1615                                  * fibctxList, make a copy of the
1616                                  * fib, and then set the event to wake up the
1617                                  * thread that is waiting for it.
1618                                  */
1619                                 hw_fib_p = hw_fib_pool;
1620                                 fib_p = fib_pool;
1621                                 while (entry != &dev->fib_list) {
1622                                         /*
1623                                          * Extract the fibctx
1624                                          */
1625                                         fibctx = list_entry(entry, struct aac_fib_context, next);
1626                                         /*
1627                                          * Check if the queue is getting
1628                                          * backlogged
1629                                          */
1630                                         if (fibctx->count > 20)
1631                                         {
1632                                                 /*
1633                                                  * It's *not* jiffies folks,
1634                                                  * but jiffies / HZ so do not
1635                                                  * panic ...
1636                                                  */
1637                                                 time_last = fibctx->jiffies;
1638                                                 /*
1639                                                  * Has it been > 2 minutes
1640                                                  * since the last read off
1641                                                  * the queue?
1642                                                  */
1643                                                 if ((time_now - time_last) > aif_timeout) {
1644                                                         entry = entry->next;
1645                                                         aac_close_fib_context(dev, fibctx);
1646                                                         continue;
1647                                                 }
1648                                         }
1649                                         /*
1650                                          * Warning: no sleep allowed while
1651                                          * holding spinlock
1652                                          */
1653                                         if (hw_fib_p < &hw_fib_pool[num]) {
1654                                                 hw_newfib = *hw_fib_p;
1655                                                 *(hw_fib_p++) = NULL;
1656                                                 newfib = *fib_p;
1657                                                 *(fib_p++) = NULL;
1658                                                 /*
1659                                                  * Make the copy of the FIB
1660                                                  */
1661                                                 memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
1662                                                 memcpy(newfib, fib, sizeof(struct fib));
1663                                                 newfib->hw_fib_va = hw_newfib;
1664                                                 /*
1665                                                  * Put the FIB onto the
1666                                                  * fibctx's fibs
1667                                                  */
1668                                                 list_add_tail(&newfib->fiblink, &fibctx->fib_list);
1669                                                 fibctx->count++;
1670                                                 /*
1671                                                  * Set the event to wake up the
1672                                                  * thread that is waiting.
1673                                                  */
1674                                                 up(&fibctx->wait_sem);
1675                                         } else {
1676                                                 printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1677                                         }
1678                                         entry = entry->next;
1679                                 }
1680                                 /*
1681                                  *      Set the status of this FIB
1682                                  */
1683                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1684                                 aac_fib_adapter_complete(fib, sizeof(u32));
1685                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1686                                 /* Free up the remaining resources */
1687                                 hw_fib_p = hw_fib_pool;
1688                                 fib_p = fib_pool;
1689                                 while (hw_fib_p < &hw_fib_pool[num]) {
1690                                         kfree(*hw_fib_p);
1691                                         kfree(*fib_p);
1692                                         ++fib_p;
1693                                         ++hw_fib_p;
1694                                 }
1695                                 kfree(hw_fib_pool);
1696                                 kfree(fib_pool);
1697                         }
1698                         kfree(fib);
1699                         spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1700                 }
1701                 /*
1702                  *      There are no more AIF's
1703                  */
1704                 spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1705
1706                 /*
1707                  *      Background activity
1708                  */
1709                 if ((time_before(next_check_jiffies,next_jiffies))
1710                  && ((difference = next_check_jiffies - jiffies) <= 0)) {
1711                         next_check_jiffies = next_jiffies;
1712                         if (aac_check_health(dev) == 0) {
1713                                 difference = ((long)(unsigned)check_interval)
1714                                            * HZ;
1715                                 next_check_jiffies = jiffies + difference;
1716                         } else if (!dev->queues)
1717                                 break;
1718                 }
1719                 if (!time_before(next_check_jiffies,next_jiffies)
1720                  && ((difference = next_jiffies - jiffies) <= 0)) {
1721                         struct timeval now;
1722                         int ret;
1723
1724                         /* Don't even try to talk to adapter if its sick */
1725                         ret = aac_check_health(dev);
1726                         if (!ret && !dev->queues)
1727                                 break;
1728                         next_check_jiffies = jiffies
1729                                            + ((long)(unsigned)check_interval)
1730                                            * HZ;
1731                         do_gettimeofday(&now);
1732
1733                         /* Synchronize our watches */
1734                         if (((1000000 - (1000000 / HZ)) > now.tv_usec)
1735                          && (now.tv_usec > (1000000 / HZ)))
1736                                 difference = (((1000000 - now.tv_usec) * HZ)
1737                                   + 500000) / 1000000;
1738                         else if (ret == 0) {
1739                                 struct fib *fibptr;
1740
1741                                 if ((fibptr = aac_fib_alloc(dev))) {
1742                                         __le32 *info;
1743
1744                                         aac_fib_init(fibptr);
1745
1746                                         info = (__le32 *) fib_data(fibptr);
1747                                         if (now.tv_usec > 500000)
1748                                                 ++now.tv_sec;
1749
1750                                         *info = cpu_to_le32(now.tv_sec);
1751
1752                                         (void)aac_fib_send(SendHostTime,
1753                                                 fibptr,
1754                                                 sizeof(*info),
1755                                                 FsaNormal,
1756                                                 1, 1,
1757                                                 NULL,
1758                                                 NULL);
1759                                         aac_fib_complete(fibptr);
1760                                         aac_fib_free(fibptr);
1761                                 }
1762                                 difference = (long)(unsigned)update_interval*HZ;
1763                         } else {
1764                                 /* retry shortly */
1765                                 difference = 10 * HZ;
1766                         }
1767                         next_jiffies = jiffies + difference;
1768                         if (time_before(next_check_jiffies,next_jiffies))
1769                                 difference = next_check_jiffies - jiffies;
1770                 }
1771                 if (difference <= 0)
1772                         difference = 1;
1773                 set_current_state(TASK_INTERRUPTIBLE);
1774                 schedule_timeout(difference);
1775
1776                 if (kthread_should_stop())
1777                         break;
1778         }
1779         if (dev->queues)
1780                 remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1781         dev->aif_thread = 0;
1782         return 0;
1783 }