drivers/scsi/aacraid/commsup.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2, or (at your option)
  13  * any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; see the file COPYING.  If not, write to
  22  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  * Module Name:
  25  *  commsup.c
  26  *
  27  * Abstract: Contain all routines that are required for FSA host/adapter
  28  *    communication.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/sched.h>
  36 #include <linux/pci.h>
  37 #include <linux/spinlock.h>
  38 #include <linux/slab.h>
  39 #include <linux/completion.h>
  40 #include <linux/blkdev.h>
  41 #include <linux/delay.h>
  42 #include <linux/kthread.h>
  43 #include <linux/interrupt.h>
  44 #include <scsi/scsi.h>
  45 #include <scsi/scsi_host.h>
  46 #include <scsi/scsi_device.h>
  47 #include <scsi/scsi_cmnd.h>
  48 #include <asm/semaphore.h>
  49
  50 #include "aacraid.h"
  51
  52 /**
  53  *      fib_map_alloc           -       allocate the fib objects
  54  *      @dev: Adapter to allocate for
  55  *
  56  *      Allocate and map the shared PCI space for the FIB blocks used to
  57  *      talk to the Adaptec firmware.
  58  */
  59
  60 static int fib_map_alloc(struct aac_dev *dev)
  61 {
  62         dprintk((KERN_INFO
  63           "allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n",
  64           dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue,
  65           AAC_NUM_MGT_FIB, &dev->hw_fib_pa));
  66         if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size
  67           * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
  68           &dev->hw_fib_pa))==NULL)
  69                 return -ENOMEM;
  70         return 0;
  71 }
  72
  73 /**
  74  *      aac_fib_map_free                -       free the fib objects
  75  *      @dev: Adapter to free
  76  *
  77  *      Free the PCI mappings and the memory allocated for FIB blocks
  78  *      on this adapter.
  79  */
  80
  81 void aac_fib_map_free(struct aac_dev *dev)
  82 {
  83         pci_free_consistent(dev->pdev,
  84           dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
  85           dev->hw_fib_va, dev->hw_fib_pa);
  86         dev->hw_fib_va = NULL;
  87         dev->hw_fib_pa = 0;
  88 }
  89
  90 /**
  91  *      aac_fib_setup   -       setup the fibs
  92  *      @dev: Adapter to set up
  93  *
  94  *      Allocate the PCI space for the fibs, map it and then intialise the
  95  *      fib area, the unmapped fib data and also the free list
  96  */
  97
  98 int aac_fib_setup(struct aac_dev * dev)
  99 {
 100         struct fib *fibptr;
 101         struct hw_fib *hw_fib;
 102         dma_addr_t hw_fib_pa;
 103         int i;
 104
 105         while (((i = fib_map_alloc(dev)) == -ENOMEM)
 106          && (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) {
 107                 dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1);
 108                 dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB;
 109         }
 110         if (i<0)
 111                 return -ENOMEM;
 112
 113         hw_fib = dev->hw_fib_va;
 114         hw_fib_pa = dev->hw_fib_pa;
 115         memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
 116         /*
 117          *      Initialise the fibs
 118          */
 119         for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++)
 120         {
 121                 fibptr->dev = dev;
 122                 fibptr->hw_fib_va = hw_fib;
 123                 fibptr->data = (void *) fibptr->hw_fib_va->data;
 124                 fibptr->next = fibptr+1;        /* Forward chain the fibs */
 125                 init_MUTEX_LOCKED(&fibptr->event_wait);
 126                 spin_lock_init(&fibptr->event_lock);
 127                 hw_fib->header.XferState = cpu_to_le32(0xffffffff);
 128                 hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
 129                 fibptr->hw_fib_pa = hw_fib_pa;
 130                 hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
 131                 hw_fib_pa = hw_fib_pa + dev->max_fib_size;
 132         }
 133         /*
 134          *      Add the fib chain to the free list
 135          */
 136         dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
 137         /*
 138          *      Enable this to debug out of queue space
 139          */
 140         dev->free_fib = &dev->fibs[0];
 141         return 0;
 142 }
 143
 144 /**
 145  *      aac_fib_alloc   -       allocate a fib
 146  *      @dev: Adapter to allocate the fib for
 147  *
 148  *      Allocate a fib from the adapter fib pool. If the pool is empty we
 149  *      return NULL.
 150  */
 151
 152 struct fib *aac_fib_alloc(struct aac_dev *dev)
 153 {
 154         struct fib * fibptr;
 155         unsigned long flags;
 156         spin_lock_irqsave(&dev->fib_lock, flags);
 157         fibptr = dev->free_fib;
 158         if(!fibptr){
 159                 spin_unlock_irqrestore(&dev->fib_lock, flags);
 160                 return fibptr;
 161         }
 162         dev->free_fib = fibptr->next;
 163         spin_unlock_irqrestore(&dev->fib_lock, flags);
 164         /*
 165          *      Set the proper node type code and node byte size
 166          */
 167         fibptr->type = FSAFS_NTC_FIB_CONTEXT;
 168         fibptr->size = sizeof(struct fib);
 169         /*
 170          *      Null out fields that depend on being zero at the start of
 171          *      each I/O
 172          */
 173         fibptr->hw_fib_va->header.XferState = 0;
 174         fibptr->callback = NULL;
 175         fibptr->callback_data = NULL;
 176
 177         return fibptr;
 178 }
 179
 180 /**
 181  *      aac_fib_free    -       free a fib
 182  *      @fibptr: fib to free up
 183  *
 184  *      Frees up a fib and places it on the appropriate queue
 185  */
 186
 187 void aac_fib_free(struct fib *fibptr)
 188 {
 189         unsigned long flags;
 190
 191         spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
 192         if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 193                 aac_config.fib_timeouts++;
 194         if (fibptr->hw_fib_va->header.XferState != 0) {
 195                 printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
 196                          (void*)fibptr,
 197                          le32_to_cpu(fibptr->hw_fib_va->header.XferState));
 198         }
 199         fibptr->next = fibptr->dev->free_fib;
 200         fibptr->dev->free_fib = fibptr;
 201         spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
 202 }
 203
 204 /**
 205  *      aac_fib_init    -       initialise a fib
 206  *      @fibptr: The fib to initialize
 207  *
 208  *      Set up the generic fib fields ready for use
 209  */
 210
 211 void aac_fib_init(struct fib *fibptr)
 212 {
 213         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 214
 215         hw_fib->header.StructType = FIB_MAGIC;
 216         hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
 217         hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
 218         hw_fib->header.SenderFibAddress = 0; /* Filled in later if needed */
 219         hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
 220         hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
 221 }
 222
 223 /**
 224  *      fib_deallocate          -       deallocate a fib
 225  *      @fibptr: fib to deallocate
 226  *
 227  *      Will deallocate and return to the free pool the FIB pointed to by the
 228  *      caller.
 229  */
 230
 231 static void fib_dealloc(struct fib * fibptr)
 232 {
 233         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 234         BUG_ON(hw_fib->header.StructType != FIB_MAGIC);
 235         hw_fib->header.XferState = 0;
 236 }
 237
 238 /*
 239  *      Commuication primitives define and support the queuing method we use to
 240  *      support host to adapter commuication. All queue accesses happen through
 241  *      these routines and are the only routines which have a knowledge of the
 242  *       how these queues are implemented.
 243  */
 244
 245 /**
 246  *      aac_get_entry           -       get a queue entry
 247  *      @dev: Adapter
 248  *      @qid: Queue Number
 249  *      @entry: Entry return
 250  *      @index: Index return
 251  *      @nonotify: notification control
 252  *
 253  *      With a priority the routine returns a queue entry if the queue has free entries. If the queue
 254  *      is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is
 255  *      returned.
 256  */
 257
 258 static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify)
 259 {
 260         struct aac_queue * q;
 261         unsigned long idx;
 262
 263         /*
 264          *      All of the queues wrap when they reach the end, so we check
 265          *      to see if they have reached the end and if they have we just
 266          *      set the index back to zero. This is a wrap. You could or off
 267          *      the high bits in all updates but this is a bit faster I think.
 268          */
 269
 270         q = &dev->queues->queue[qid];
 271
 272         idx = *index = le32_to_cpu(*(q->headers.producer));
 273         /* Interrupt Moderation, only interrupt for first two entries */
 274         if (idx != le32_to_cpu(*(q->headers.consumer))) {
 275                 if (--idx == 0) {
 276                         if (qid == AdapNormCmdQueue)
 277                                 idx = ADAP_NORM_CMD_ENTRIES;
 278                         else
 279                                 idx = ADAP_NORM_RESP_ENTRIES;
 280                 }
 281                 if (idx != le32_to_cpu(*(q->headers.consumer)))
 282                         *nonotify = 1;
 283         }
 284
 285         if (qid == AdapNormCmdQueue) {
 286                 if (*index >= ADAP_NORM_CMD_ENTRIES)
 287                         *index = 0; /* Wrap to front of the Producer Queue. */
 288         } else {
 289                 if (*index >= ADAP_NORM_RESP_ENTRIES)
 290                         *index = 0; /* Wrap to front of the Producer Queue. */
 291         }
 292
 293         if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */
 294                 printk(KERN_WARNING "Queue %d full, %u outstanding.\n",
 295                                 qid, q->numpending);
 296                 return 0;
 297         } else {
 298                 *entry = q->base + *index;
 299                 return 1;
 300         }
 301 }
 302
 303 /**
 304  *      aac_queue_get           -       get the next free QE
 305  *      @dev: Adapter
 306  *      @index: Returned index
 307  *      @priority: Priority of fib
 308  *      @fib: Fib to associate with the queue entry
 309  *      @wait: Wait if queue full
 310  *      @fibptr: Driver fib object to go with fib
 311  *      @nonotify: Don't notify the adapter
 312  *
 313  *      Gets the next free QE off the requested priorty adapter command
 314  *      queue and associates the Fib with the QE. The QE represented by
 315  *      index is ready to insert on the queue when this routine returns
 316  *      success.
 317  */
 318
 319 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
 320 {
 321         struct aac_entry * entry = NULL;
 322         int map = 0;
 323
 324         if (qid == AdapNormCmdQueue) {
 325                 /*  if no entries wait for some if caller wants to */
 326                 while (!aac_get_entry(dev, qid, &entry, index, nonotify))
 327                 {
 328                         printk(KERN_ERR "GetEntries failed\n");
 329                 }
 330                 /*
 331                  *      Setup queue entry with a command, status and fib mapped
 332                  */
 333                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 334                 map = 1;
 335         } else {
 336                 while(!aac_get_entry(dev, qid, &entry, index, nonotify))
 337                 {
 338                         /* if no entries wait for some if caller wants to */
 339                 }
 340                 /*
 341                  *      Setup queue entry with command, status and fib mapped
 342                  */
 343                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 344                 entry->addr = hw_fib->header.SenderFibAddress;
 345                         /* Restore adapters pointer to the FIB */
 346                 hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress;    /* Let the adapter now where to find its data */
 347                 map = 0;
 348         }
 349         /*
 350          *      If MapFib is true than we need to map the Fib and put pointers
 351          *      in the queue entry.
 352          */
 353         if (map)
 354                 entry->addr = cpu_to_le32(fibptr->hw_fib_pa);
 355         return 0;
 356 }
 357
 358 /*
 359  *      Define the highest level of host to adapter communication routines.
 360  *      These routines will support host to adapter FS commuication. These
 361  *      routines have no knowledge of the commuication method used. This level
 362  *      sends and receives FIBs. This level has no knowledge of how these FIBs
 363  *      get passed back and forth.
 364  */
 365
 366 /**
 367  *      aac_fib_send    -       send a fib to the adapter
 368  *      @command: Command to send
 369  *      @fibptr: The fib
 370  *      @size: Size of fib data area
 371  *      @priority: Priority of Fib
 372  *      @wait: Async/sync select
 373  *      @reply: True if a reply is wanted
 374  *      @callback: Called with reply
 375  *      @callback_data: Passed to callback
 376  *
 377  *      Sends the requested FIB to the adapter and optionally will wait for a
 378  *      response FIB. If the caller does not wish to wait for a response than
 379  *      an event to wait on must be supplied. This event will be set when a
 380  *      response FIB is received from the adapter.
 381  */
 382
 383 int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 384                 int priority, int wait, int reply, fib_callback callback,
 385                 void *callback_data)
 386 {
 387         struct aac_dev * dev = fibptr->dev;
 388         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 389         unsigned long flags = 0;
 390         unsigned long qflags;
 391
 392         if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 393                 return -EBUSY;
 394         /*
 395          *      There are 5 cases with the wait and reponse requested flags.
 396          *      The only invalid cases are if the caller requests to wait and
 397          *      does not request a response and if the caller does not want a
 398          *      response and the Fib is not allocated from pool. If a response
 399          *      is not requesed the Fib will just be deallocaed by the DPC
 400          *      routine when the response comes back from the adapter. No
 401          *      further processing will be done besides deleting the Fib. We
 402          *      will have a debug mode where the adapter can notify the host
 403          *      it had a problem and the host can log that fact.
 404          */
 405         if (wait && !reply) {
 406                 return -EINVAL;
 407         } else if (!wait && reply) {
 408                 hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected);
 409                 FIB_COUNTER_INCREMENT(aac_config.AsyncSent);
 410         } else if (!wait && !reply) {
 411                 hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected);
 412                 FIB_COUNTER_INCREMENT(aac_config.NoResponseSent);
 413         } else if (wait && reply) {
 414                 hw_fib->header.XferState |= cpu_to_le32(ResponseExpected);
 415                 FIB_COUNTER_INCREMENT(aac_config.NormalSent);
 416         }
 417         /*
 418          *      Map the fib into 32bits by using the fib number
 419          */
 420
 421         hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr - dev->fibs)) << 2);
 422         hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
 423         /*
 424          *      Set FIB state to indicate where it came from and if we want a
 425          *      response from the adapter. Also load the command from the
 426          *      caller.
 427          *
 428          *      Map the hw fib pointer as a 32bit value
 429          */
 430         hw_fib->header.Command = cpu_to_le16(command);
 431         hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
 432         fibptr->hw_fib_va->header.Flags = 0;    /* 0 the flags field - internal only*/
 433         /*
 434          *      Set the size of the Fib we want to send to the adapter
 435          */
 436         hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size);
 437         if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) {
 438                 return -EMSGSIZE;
 439         }
 440         /*
 441          *      Get a queue entry connect the FIB to it and send an notify
 442          *      the adapter a command is ready.
 443          */
 444         hw_fib->header.XferState |= cpu_to_le32(NormalPriority);
 445
 446         /*
 447          *      Fill in the Callback and CallbackContext if we are not
 448          *      going to wait.
 449          */
 450         if (!wait) {
 451                 fibptr->callback = callback;
 452                 fibptr->callback_data = callback_data;
 453         }
 454
 455         fibptr->done = 0;
 456         fibptr->flags = 0;
 457
 458         FIB_COUNTER_INCREMENT(aac_config.FibsSent);
 459
 460         dprintk((KERN_DEBUG "Fib contents:.\n"));
 461         dprintk((KERN_DEBUG "  Command =               %d.\n", le32_to_cpu(hw_fib->header.Command)));
 462         dprintk((KERN_DEBUG "  SubCommand =            %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
 463         dprintk((KERN_DEBUG "  XferState  =            %x.\n", le32_to_cpu(hw_fib->header.XferState)));
 464         dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib_va));
 465         dprintk((KERN_DEBUG "  hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
 466         dprintk((KERN_DEBUG "  fib being sent=%p\n",fibptr));
 467
 468         if (!dev->queues)
 469                 return -EBUSY;
 470
 471         if(wait)
 472                 spin_lock_irqsave(&fibptr->event_lock, flags);
 473         aac_adapter_deliver(fibptr);
 474
 475         /*
 476          *      If the caller wanted us to wait for response wait now.
 477          */
 478
 479         if (wait) {
 480                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 481                 /* Only set for first known interruptable command */
 482                 if (wait < 0) {
 483                         /*
 484                          * *VERY* Dangerous to time out a command, the
 485                          * assumption is made that we have no hope of
 486                          * functioning because an interrupt routing or other
 487                          * hardware failure has occurred.
 488                          */
 489                         unsigned long count = 36000000L; /* 3 minutes */
 490                         while (down_trylock(&fibptr->event_wait)) {
 491                                 int blink;
 492                                 if (--count == 0) {
 493                                         struct aac_queue * q = &dev->queues->queue[AdapNormCmdQueue];
 494                                         spin_lock_irqsave(q->lock, qflags);
 495                                         q->numpending--;
 496                                         spin_unlock_irqrestore(q->lock, qflags);
 497                                         if (wait == -1) {
 498                                                 printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n"
 499                                                   "Usually a result of a PCI interrupt routing problem;\n"
 500                                                   "update mother board BIOS or consider utilizing one of\n"
 501                                                   "the SAFE mode kernel options (acpi, apic etc)\n");
 502                                         }
 503                                         return -ETIMEDOUT;
 504                                 }
 505                                 if ((blink = aac_adapter_check_health(dev)) > 0) {
 506                                         if (wait == -1) {
 507                                                 printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n"
 508                                                   "Usually a result of a serious unrecoverable hardware problem\n",
 509                                                   blink);
 510                                         }
 511                                         return -EFAULT;
 512                                 }
 513                                 udelay(5);
 514                         }
 515                 } else
 516                         (void)down_interruptible(&fibptr->event_wait);
 517                 spin_lock_irqsave(&fibptr->event_lock, flags);
 518                 if (fibptr->done == 0) {
 519                         fibptr->done = 2; /* Tell interrupt we aborted */
 520                         spin_unlock_irqrestore(&fibptr->event_lock, flags);
 521                         return -EINTR;
 522                 }
 523                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 524                 BUG_ON(fibptr->done == 0);
 525
 526                 if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 527                         return -ETIMEDOUT;
 528                 return 0;
 529         }
 530         /*
 531          *      If the user does not want a response than return success otherwise
 532          *      return pending
 533          */
 534         if (reply)
 535                 return -EINPROGRESS;
 536         else
 537                 return 0;
 538 }
 539
 540 /**
 541  *      aac_consumer_get        -       get the top of the queue
 542  *      @dev: Adapter
 543  *      @q: Queue
 544  *      @entry: Return entry
 545  *
 546  *      Will return a pointer to the entry on the top of the queue requested that
 547  *      we are a consumer of, and return the address of the queue entry. It does
 548  *      not change the state of the queue.
 549  */
 550
 551 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry)
 552 {
 553         u32 index;
 554         int status;
 555         if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) {
 556                 status = 0;
 557         } else {
 558                 /*
 559                  *      The consumer index must be wrapped if we have reached
 560                  *      the end of the queue, else we just use the entry
 561                  *      pointed to by the header index
 562                  */
 563                 if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 564                         index = 0;
 565                 else
 566                         index = le32_to_cpu(*q->headers.consumer);
 567                 *entry = q->base + index;
 568                 status = 1;
 569         }
 570         return(status);
 571 }
 572
 573 /**
 574  *      aac_consumer_free       -       free consumer entry
 575  *      @dev: Adapter
 576  *      @q: Queue
 577  *      @qid: Queue ident
 578  *
 579  *      Frees up the current top of the queue we are a consumer of. If the
 580  *      queue was full notify the producer that the queue is no longer full.
 581  */
 582
 583 void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
 584 {
 585         int wasfull = 0;
 586         u32 notify;
 587
 588         if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer))
 589                 wasfull = 1;
 590
 591         if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 592                 *q->headers.consumer = cpu_to_le32(1);
 593         else
 594                 *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1);
 595
 596         if (wasfull) {
 597                 switch (qid) {
 598
 599                 case HostNormCmdQueue:
 600                         notify = HostNormCmdNotFull;
 601                         break;
 602                 case HostNormRespQueue:
 603                         notify = HostNormRespNotFull;
 604                         break;
 605                 default:
 606                         BUG();
 607                         return;
 608                 }
 609                 aac_adapter_notify(dev, notify);
 610         }
 611 }
 612
 613 /**
 614  *      aac_fib_adapter_complete        -       complete adapter issued fib
 615  *      @fibptr: fib to complete
 616  *      @size: size of fib
 617  *
 618  *      Will do all necessary work to complete a FIB that was sent from
 619  *      the adapter.
 620  */
 621
 622 int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
 623 {
 624         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 625         struct aac_dev * dev = fibptr->dev;
 626         struct aac_queue * q;
 627         unsigned long nointr = 0;
 628         unsigned long qflags;
 629
 630         if (hw_fib->header.XferState == 0) {
 631                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 632                         kfree (hw_fib);
 633                 return 0;
 634         }
 635         /*
 636          *      If we plan to do anything check the structure type first.
 637          */
 638         if ( hw_fib->header.StructType != FIB_MAGIC ) {
 639                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 640                         kfree (hw_fib);
 641                 return -EINVAL;
 642         }
 643         /*
 644          *      This block handles the case where the adapter had sent us a
 645          *      command and we have finished processing the command. We
 646          *      call completeFib when we are done processing the command
 647          *      and want to send a response back to the adapter. This will
 648          *      send the completed cdb to the adapter.
 649          */
 650         if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
 651                 if (dev->comm_interface == AAC_COMM_MESSAGE) {
 652                         kfree (hw_fib);
 653                 } else {
 654                         u32 index;
 655                         hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
 656                         if (size) {
 657                                 size += sizeof(struct aac_fibhdr);
 658                                 if (size > le16_to_cpu(hw_fib->header.SenderSize))
 659                                         return -EMSGSIZE;
 660                                 hw_fib->header.Size = cpu_to_le16(size);
 661                         }
 662                         q = &dev->queues->queue[AdapNormRespQueue];
 663                         spin_lock_irqsave(q->lock, qflags);
 664                         aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
 665                         *(q->headers.producer) = cpu_to_le32(index + 1);
 666                         spin_unlock_irqrestore(q->lock, qflags);
 667                         if (!(nointr & (int)aac_config.irq_mod))
 668                                 aac_adapter_notify(dev, AdapNormRespQueue);
 669                 }
 670         }
 671         else
 672         {
 673                 printk(KERN_WARNING "aac_fib_adapter_complete: Unknown xferstate detected.\n");
 674                 BUG();
 675         }
 676         return 0;
 677 }
 678
 679 /**
 680  *      aac_fib_complete        -       fib completion handler
 681  *      @fib: FIB to complete
 682  *
 683  *      Will do all necessary work to complete a FIB.
 684  */
 685
 686 int aac_fib_complete(struct fib *fibptr)
 687 {
 688         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 689
 690         /*
 691          *      Check for a fib which has already been completed
 692          */
 693
 694         if (hw_fib->header.XferState == 0)
 695                 return 0;
 696         /*
 697          *      If we plan to do anything check the structure type first.
 698          */
 699
 700         if (hw_fib->header.StructType != FIB_MAGIC)
 701                 return -EINVAL;
 702         /*
 703          *      This block completes a cdb which orginated on the host and we
 704          *      just need to deallocate the cdb or reinit it. At this point the
 705          *      command is complete that we had sent to the adapter and this
 706          *      cdb could be reused.
 707          */
 708         if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
 709                 (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
 710         {
 711                 fib_dealloc(fibptr);
 712         }
 713         else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost))
 714         {
 715                 /*
 716                  *      This handles the case when the host has aborted the I/O
 717                  *      to the adapter because the adapter is not responding
 718                  */
 719                 fib_dealloc(fibptr);
 720         } else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) {
 721                 fib_dealloc(fibptr);
 722         } else {
 723                 BUG();
 724         }
 725         return 0;
 726 }
 727
 728 /**
 729  *      aac_printf      -       handle printf from firmware
 730  *      @dev: Adapter
 731  *      @val: Message info
 732  *
 733  *      Print a message passed to us by the controller firmware on the
 734  *      Adaptec board
 735  */
 736
 737 void aac_printf(struct aac_dev *dev, u32 val)
 738 {
 739         char *cp = dev->printfbuf;
 740         if (dev->printf_enabled)
 741         {
 742                 int length = val & 0xffff;
 743                 int level = (val >> 16) & 0xffff;
 744
 745                 /*
 746                  *      The size of the printfbuf is set in port.c
 747                  *      There is no variable or define for it
 748                  */
 749                 if (length > 255)
 750                         length = 255;
 751                 if (cp[length] != 0)
 752                         cp[length] = 0;
 753                 if (level == LOG_AAC_HIGH_ERROR)
 754                         printk(KERN_WARNING "%s:%s", dev->name, cp);
 755                 else
 756                         printk(KERN_INFO "%s:%s", dev->name, cp);
 757         }
 758         memset(cp, 0,  256);
 759 }
 760
 761
 762 /**
 763  *      aac_handle_aif          -       Handle a message from the firmware
 764  *      @dev: Which adapter this fib is from
 765  *      @fibptr: Pointer to fibptr from adapter
 766  *
 767  *      This routine handles a driver notify fib from the adapter and
 768  *      dispatches it to the appropriate routine for handling.
 769  */
 770
 771 #define AIF_SNIFF_TIMEOUT       (30*HZ)
 772 static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 773 {
 774         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 775         struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
 776         u32 container;
 777         struct scsi_device *device;
 778         enum {
 779                 NOTHING,
 780                 DELETE,
 781                 ADD,
 782                 CHANGE
 783         } device_config_needed;
 784
 785         /* Sniff for container changes */
 786
 787         if (!dev || !dev->fsa_dev)
 788                 return;
 789         container = (u32)-1;
 790
 791         /*
 792          *      We have set this up to try and minimize the number of
 793          * re-configures that take place. As a result of this when
 794          * certain AIF's come in we will set a flag waiting for another
 795          * type of AIF before setting the re-config flag.
 796          */
 797         switch (le32_to_cpu(aifcmd->command)) {
 798         case AifCmdDriverNotify:
 799                 switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
 800                 /*
 801                  *      Morph or Expand complete
 802                  */
 803                 case AifDenMorphComplete:
 804                 case AifDenVolumeExtendComplete:
 805                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 806                         if (container >= dev->maximum_num_containers)
 807                                 break;
 808
 809                         /*
 810                          *      Find the scsi_device associated with the SCSI
 811                          * address. Make sure we have the right array, and if
 812                          * so set the flag to initiate a new re-config once we
 813                          * see an AifEnConfigChange AIF come through.
 814                          */
 815
 816                         if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) {
 817                                 device = scsi_device_lookup(dev->scsi_host_ptr,
 818                                         CONTAINER_TO_CHANNEL(container),
 819                                         CONTAINER_TO_ID(container),
 820                                         CONTAINER_TO_LUN(container));
 821                                 if (device) {
 822                                         dev->fsa_dev[container].config_needed = CHANGE;
 823                                         dev->fsa_dev[container].config_waiting_on = AifEnConfigChange;
 824                                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 825                                         scsi_device_put(device);
 826                                 }
 827                         }
 828                 }
 829
 830                 /*
 831                  *      If we are waiting on something and this happens to be
 832                  * that thing then set the re-configure flag.
 833                  */
 834                 if (container != (u32)-1) {
 835                         if (container >= dev->maximum_num_containers)
 836                                 break;
 837                         if ((dev->fsa_dev[container].config_waiting_on ==
 838                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 839                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 840                                 dev->fsa_dev[container].config_waiting_on = 0;
 841                 } else for (container = 0;
 842                     container < dev->maximum_num_containers; ++container) {
 843                         if ((dev->fsa_dev[container].config_waiting_on ==
 844                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 845                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 846                                 dev->fsa_dev[container].config_waiting_on = 0;
 847                 }
 848                 break;
 849
 850         case AifCmdEventNotify:
 851                 switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
 852                 /*
 853                  *      Add an Array.
 854                  */
 855                 case AifEnAddContainer:
 856                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 857                         if (container >= dev->maximum_num_containers)
 858                                 break;
 859                         dev->fsa_dev[container].config_needed = ADD;
 860                         dev->fsa_dev[container].config_waiting_on =
 861                                 AifEnConfigChange;
 862                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 863                         break;
 864
 865                 /*
 866                  *      Delete an Array.
 867                  */
 868                 case AifEnDeleteContainer:
 869                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 870                         if (container >= dev->maximum_num_containers)
 871                                 break;
 872                         dev->fsa_dev[container].config_needed = DELETE;
 873                         dev->fsa_dev[container].config_waiting_on =
 874                                 AifEnConfigChange;
 875                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 876                         break;
 877
 878                 /*
 879                  *      Container change detected. If we currently are not
 880                  * waiting on something else, setup to wait on a Config Change.
 881                  */
 882                 case AifEnContainerChange:
 883                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 884                         if (container >= dev->maximum_num_containers)
 885                                 break;
 886                         if (dev->fsa_dev[container].config_waiting_on &&
 887                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 888                                 break;
 889                         dev->fsa_dev[container].config_needed = CHANGE;
 890                         dev->fsa_dev[container].config_waiting_on =
 891                                 AifEnConfigChange;
 892                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 893                         break;
 894
 895                 case AifEnConfigChange:
 896                         break;
 897
 898                 }
 899
 900                 /*
 901                  *      If we are waiting on something and this happens to be
 902                  * that thing then set the re-configure flag.
 903                  */
 904                 if (container != (u32)-1) {
 905                         if (container >= dev->maximum_num_containers)
 906                                 break;
 907                         if ((dev->fsa_dev[container].config_waiting_on ==
 908                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 909                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 910                                 dev->fsa_dev[container].config_waiting_on = 0;
 911                 } else for (container = 0;
 912                     container < dev->maximum_num_containers; ++container) {
 913                         if ((dev->fsa_dev[container].config_waiting_on ==
 914                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 915                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 916                                 dev->fsa_dev[container].config_waiting_on = 0;
 917                 }
 918                 break;
 919
 920         case AifCmdJobProgress:
 921                 /*
 922                  *      These are job progress AIF's. When a Clear is being
 923                  * done on a container it is initially created then hidden from
 924                  * the OS. When the clear completes we don't get a config
 925                  * change so we monitor the job status complete on a clear then
 926                  * wait for a container change.
 927                  */
 928
 929                 if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
 930                  && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5])
 931                   || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) {
 932                         for (container = 0;
 933                             container < dev->maximum_num_containers;
 934                             ++container) {
 935                                 /*
 936                                  * Stomp on all config sequencing for all
 937                                  * containers?
 938                                  */
 939                                 dev->fsa_dev[container].config_waiting_on =
 940                                         AifEnContainerChange;
 941                                 dev->fsa_dev[container].config_needed = ADD;
 942                                 dev->fsa_dev[container].config_waiting_stamp =
 943                                         jiffies;
 944                         }
 945                 }
 946                 if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
 947                  && (((u32 *)aifcmd->data)[6] == 0)
 948                  && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) {
 949                         for (container = 0;
 950                             container < dev->maximum_num_containers;
 951                             ++container) {
 952                                 /*
 953                                  * Stomp on all config sequencing for all
 954                                  * containers?
 955                                  */
 956                                 dev->fsa_dev[container].config_waiting_on =
 957                                         AifEnContainerChange;
 958                                 dev->fsa_dev[container].config_needed = DELETE;
 959                                 dev->fsa_dev[container].config_waiting_stamp =
 960                                         jiffies;
 961                         }
 962                 }
 963                 break;
 964         }
 965
 966         device_config_needed = NOTHING;
 967         for (container = 0; container < dev->maximum_num_containers;
 968             ++container) {
 969                 if ((dev->fsa_dev[container].config_waiting_on == 0) &&
 970                         (dev->fsa_dev[container].config_needed != NOTHING) &&
 971                         time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
 972                         device_config_needed =
 973                                 dev->fsa_dev[container].config_needed;
 974                         dev->fsa_dev[container].config_needed = NOTHING;
 975                         break;
 976                 }
 977         }
 978         if (device_config_needed == NOTHING)
 979                 return;
 980
 981         /*
 982          *      If we decided that a re-configuration needs to be done,
 983          * schedule it here on the way out the door, please close the door
 984          * behind you.
 985          */
 986
 987         /*
 988          *      Find the scsi_device associated with the SCSI address,
 989          * and mark it as changed, invalidating the cache. This deals
 990          * with changes to existing device IDs.
 991          */
 992
 993         if (!dev || !dev->scsi_host_ptr)
 994                 return;
 995         /*
 996          * force reload of disk info via aac_probe_container
 997          */
 998         if ((device_config_needed == CHANGE)
 999          && (dev->fsa_dev[container].valid == 1))
1000                 dev->fsa_dev[container].valid = 2;
1001         if ((device_config_needed == CHANGE) ||
1002                         (device_config_needed == ADD))
1003                 aac_probe_container(dev, container);
1004         device = scsi_device_lookup(dev->scsi_host_ptr,
1005                 CONTAINER_TO_CHANNEL(container),
1006                 CONTAINER_TO_ID(container),
1007                 CONTAINER_TO_LUN(container));
1008         if (device) {
1009                 switch (device_config_needed) {
1010                 case DELETE:
1011                 case CHANGE:
1012                         scsi_rescan_device(&device->sdev_gendev);
1013
1014                 default:
1015                         break;
1016                 }
1017                 scsi_device_put(device);
1018         }
1019         if (device_config_needed == ADD) {
1020                 scsi_add_device(dev->scsi_host_ptr,
1021                   CONTAINER_TO_CHANNEL(container),
1022                   CONTAINER_TO_ID(container),
1023                   CONTAINER_TO_LUN(container));
1024         }
1025
1026 }
1027
1028 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
1029 {
1030         int index, quirks;
1031         int retval;
1032         struct Scsi_Host *host;
1033         struct scsi_device *dev;
1034         struct scsi_cmnd *command;
1035         struct scsi_cmnd *command_list;
1036         int jafo = 0;
1037
1038         /*
1039          * Assumptions:
1040          *      - host is locked, unless called by the aacraid thread.
1041          *        (a matter of convenience, due to legacy issues surrounding
1042          *        eh_host_adapter_reset).
1043          *      - in_reset is asserted, so no new i/o is getting to the
1044          *        card.
1045          *      - The card is dead, or will be very shortly ;-/ so no new
1046          *        commands are completing in the interrupt service.
1047          */
1048         host = aac->scsi_host_ptr;
1049         scsi_block_requests(host);
1050         aac_adapter_disable_int(aac);
1051         if (aac->thread->pid != current->pid) {
1052                 spin_unlock_irq(host->host_lock);
1053                 kthread_stop(aac->thread);
1054                 jafo = 1;
1055         }
1056
1057         /*
1058          *      If a positive health, means in a known DEAD PANIC
1059          * state and the adapter could be reset to `try again'.
1060          */
1061         retval = aac_adapter_restart(aac, forced ? 0 : aac_adapter_check_health(aac));
1062
1063         if (retval)
1064                 goto out;
1065
1066         /*
1067          *      Loop through the fibs, close the synchronous FIBS
1068          */
1069         for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
1070                 struct fib *fib = &aac->fibs[index];
1071                 if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
1072                   (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
1073                         unsigned long flagv;
1074                         spin_lock_irqsave(&fib->event_lock, flagv);
1075                         up(&fib->event_wait);
1076                         spin_unlock_irqrestore(&fib->event_lock, flagv);
1077                         schedule();
1078                         retval = 0;
1079                 }
1080         }
1081         /* Give some extra time for ioctls to complete. */
1082         if (retval == 0)
1083                 ssleep(2);
1084         index = aac->cardtype;
1085
1086         /*
1087          * Re-initialize the adapter, first free resources, then carefully
1088          * apply the initialization sequence to come back again. Only risk
1089          * is a change in Firmware dropping cache, it is assumed the caller
1090          * will ensure that i/o is queisced and the card is flushed in that
1091          * case.
1092          */
1093         aac_fib_map_free(aac);
1094         pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
1095         aac->comm_addr = NULL;
1096         aac->comm_phys = 0;
1097         kfree(aac->queues);
1098         aac->queues = NULL;
1099         free_irq(aac->pdev->irq, aac);
1100         kfree(aac->fsa_dev);
1101         aac->fsa_dev = NULL;
1102         if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) {
1103                 if (((retval = pci_set_dma_mask(aac->pdev, DMA_31BIT_MASK))) ||
1104                   ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_31BIT_MASK))))
1105                         goto out;
1106         } else {
1107                 if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
1108                   ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
1109                         goto out;
1110         }
1111         if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
1112                 goto out;
1113         if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
1114                 if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
1115                         goto out;
1116         if (jafo) {
1117                 aac->thread = kthread_run(aac_command_thread, aac, aac->name);
1118                 if (IS_ERR(aac->thread)) {
1119                         retval = PTR_ERR(aac->thread);
1120                         goto out;
1121                 }
1122         }
1123         (void)aac_get_adapter_info(aac);
1124         quirks = aac_get_driver_ident(index)->quirks;
1125         if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
1126                 host->sg_tablesize = 34;
1127                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1128         }
1129         if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
1130                 host->sg_tablesize = 17;
1131                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1132         }
1133         aac_get_config_status(aac, 1);
1134         aac_get_containers(aac);
1135         /*
1136          * This is where the assumption that the Adapter is quiesced
1137          * is important.
1138          */
1139         command_list = NULL;
1140         __shost_for_each_device(dev, host) {
1141                 unsigned long flags;
1142                 spin_lock_irqsave(&dev->list_lock, flags);
1143                 list_for_each_entry(command, &dev->cmd_list, list)
1144                         if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
1145                                 command->SCp.buffer = (struct scatterlist *)command_list;
1146                                 command_list = command;
1147                         }
1148                 spin_unlock_irqrestore(&dev->list_lock, flags);
1149         }
1150         while ((command = command_list)) {
1151                 command_list = (struct scsi_cmnd *)command->SCp.buffer;
1152                 command->SCp.buffer = NULL;
1153                 command->result = DID_OK << 16
1154                   | COMMAND_COMPLETE << 8
1155                   | SAM_STAT_TASK_SET_FULL;
1156                 command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
1157                 command->scsi_done(command);
1158         }
1159         retval = 0;
1160
1161 out:
1162         aac->in_reset = 0;
1163         scsi_unblock_requests(host);
1164         if (jafo) {
1165                 spin_lock_irq(host->host_lock);
1166         }
1167         return retval;
1168 }
1169
1170 int aac_reset_adapter(struct aac_dev * aac, int forced)
1171 {
1172         unsigned long flagv = 0;
1173         int retval;
1174         struct Scsi_Host * host;
1175
1176         if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
1177                 return -EBUSY;
1178
1179         if (aac->in_reset) {
1180                 spin_unlock_irqrestore(&aac->fib_lock, flagv);
1181                 return -EBUSY;
1182         }
1183         aac->in_reset = 1;
1184         spin_unlock_irqrestore(&aac->fib_lock, flagv);
1185
1186         /*
1187          * Wait for all commands to complete to this specific
1188          * target (block maximum 60 seconds). Although not necessary,
1189          * it does make us a good storage citizen.
1190          */
1191         host = aac->scsi_host_ptr;
1192         scsi_block_requests(host);
1193         if (forced < 2) for (retval = 60; retval; --retval) {
1194                 struct scsi_device * dev;
1195                 struct scsi_cmnd * command;
1196                 int active = 0;
1197
1198                 __shost_for_each_device(dev, host) {
1199                         spin_lock_irqsave(&dev->list_lock, flagv);
1200                         list_for_each_entry(command, &dev->cmd_list, list) {
1201                                 if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
1202                                         active++;
1203                                         break;
1204                                 }
1205                         }
1206                         spin_unlock_irqrestore(&dev->list_lock, flagv);
1207                         if (active)
1208                                 break;
1209
1210                 }
1211                 /*
1212                  * We can exit If all the commands are complete
1213                  */
1214                 if (active == 0)
1215                         break;
1216                 ssleep(1);
1217         }
1218
1219         /* Quiesce build, flush cache, write through mode */
1220         aac_send_shutdown(aac);
1221         spin_lock_irqsave(host->host_lock, flagv);
1222         retval = _aac_reset_adapter(aac, forced);
1223         spin_unlock_irqrestore(host->host_lock, flagv);
1224
1225         if (retval == -ENODEV) {
1226                 /* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */
1227                 struct fib * fibctx = aac_fib_alloc(aac);
1228                 if (fibctx) {
1229                         struct aac_pause *cmd;
1230                         int status;
1231
1232                         aac_fib_init(fibctx);
1233
1234                         cmd = (struct aac_pause *) fib_data(fibctx);
1235
1236                         cmd->command = cpu_to_le32(VM_ContainerConfig);
1237                         cmd->type = cpu_to_le32(CT_PAUSE_IO);
1238                         cmd->timeout = cpu_to_le32(1);
1239                         cmd->min = cpu_to_le32(1);
1240                         cmd->noRescan = cpu_to_le32(1);
1241                         cmd->count = cpu_to_le32(0);
1242
1243                         status = aac_fib_send(ContainerCommand,
1244                           fibctx,
1245                           sizeof(struct aac_pause),
1246                           FsaNormal,
1247                           -2 /* Timeout silently */, 1,
1248                           NULL, NULL);
1249
1250                         if (status >= 0)
1251                                 aac_fib_complete(fibctx);
1252                         aac_fib_free(fibctx);
1253                 }
1254         }
1255
1256         return retval;
1257 }
1258
1259 int aac_check_health(struct aac_dev * aac)
1260 {
1261         int BlinkLED;
1262         unsigned long time_now, flagv = 0;
1263         struct list_head * entry;
1264         struct Scsi_Host * host;
1265
1266         /* Extending the scope of fib_lock slightly to protect aac->in_reset */
1267         if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
1268                 return 0;
1269
1270         if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
1271                 spin_unlock_irqrestore(&aac->fib_lock, flagv);
1272                 return 0; /* OK */
1273         }
1274
1275         aac->in_reset = 1;
1276
1277         /* Fake up an AIF:
1278          *      aac_aifcmd.command = AifCmdEventNotify = 1
1279          *      aac_aifcmd.seqnum = 0xFFFFFFFF
1280          *      aac_aifcmd.data[0] = AifEnExpEvent = 23
1281          *      aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
1282          *      aac.aifcmd.data[2] = AifHighPriority = 3
1283          *      aac.aifcmd.data[3] = BlinkLED
1284          */
1285
1286         time_now = jiffies/HZ;
1287         entry = aac->fib_list.next;
1288
1289         /*
1290          * For each Context that is on the
1291          * fibctxList, make a copy of the
1292          * fib, and then set the event to wake up the
1293          * thread that is waiting for it.
1294          */
1295         while (entry != &aac->fib_list) {
1296                 /*
1297                  * Extract the fibctx
1298                  */
1299                 struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
1300                 struct hw_fib * hw_fib;
1301                 struct fib * fib;
1302                 /*
1303                  * Check if the queue is getting
1304                  * backlogged
1305                  */
1306                 if (fibctx->count > 20) {
1307                         /*
1308                          * It's *not* jiffies folks,
1309                          * but jiffies / HZ, so do not
1310                          * panic ...
1311                          */
1312                         u32 time_last = fibctx->jiffies;
1313                         /*
1314                          * Has it been > 2 minutes
1315                          * since the last read off
1316                          * the queue?
1317                          */
1318                         if ((time_now - time_last) > aif_timeout) {
1319                                 entry = entry->next;
1320                                 aac_close_fib_context(aac, fibctx);
1321                                 continue;
1322                         }
1323                 }
1324                 /*
1325                  * Warning: no sleep allowed while
1326                  * holding spinlock
1327                  */
1328                 hw_fib = kzalloc(sizeof(struct hw_fib), GFP_ATOMIC);
1329                 fib = kzalloc(sizeof(struct fib), GFP_ATOMIC);
1330                 if (fib && hw_fib) {
1331                         struct aac_aifcmd * aif;
1332
1333                         fib->hw_fib_va = hw_fib;
1334                         fib->dev = aac;
1335                         aac_fib_init(fib);
1336                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1337                         fib->size = sizeof (struct fib);
1338                         fib->data = hw_fib->data;
1339                         aif = (struct aac_aifcmd *)hw_fib->data;
1340                         aif->command = cpu_to_le32(AifCmdEventNotify);
1341                         aif->seqnum = cpu_to_le32(0xFFFFFFFF);
1342                         aif->data[0] = cpu_to_le32(AifEnExpEvent);
1343                         aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
1344                         aif->data[2] = cpu_to_le32(AifHighPriority);
1345                         aif->data[3] = cpu_to_le32(BlinkLED);
1346
1347                         /*
1348                          * Put the FIB onto the
1349                          * fibctx's fibs
1350                          */
1351                         list_add_tail(&fib->fiblink, &fibctx->fib_list);
1352                         fibctx->count++;
1353                         /*
1354                          * Set the event to wake up the
1355                          * thread that will waiting.
1356                          */
1357                         up(&fibctx->wait_sem);
1358                 } else {
1359                         printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1360                         kfree(fib);
1361                         kfree(hw_fib);
1362                 }
1363                 entry = entry->next;
1364         }
1365
1366         spin_unlock_irqrestore(&aac->fib_lock, flagv);
1367
1368         if (BlinkLED < 0) {
1369                 printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
1370                 goto out;
1371         }
1372
1373         printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
1374
1375         if (!aac_check_reset ||
1376                 (aac->supplement_adapter_info.SupportedOptions2 &
1377                         le32_to_cpu(AAC_OPTION_IGNORE_RESET)))
1378                 goto out;
1379         host = aac->scsi_host_ptr;
1380         if (aac->thread->pid != current->pid)
1381                 spin_lock_irqsave(host->host_lock, flagv);
1382         BlinkLED = _aac_reset_adapter(aac, 0);
1383         if (aac->thread->pid != current->pid)
1384                 spin_unlock_irqrestore(host->host_lock, flagv);
1385         return BlinkLED;
1386
1387 out:
1388         aac->in_reset = 0;
1389         return BlinkLED;
1390 }
1391
1392
1393 /**
1394  *      aac_command_thread      -       command processing thread
1395  *      @dev: Adapter to monitor
1396  *
1397  *      Waits on the commandready event in it's queue. When the event gets set
1398  *      it will pull FIBs off it's queue. It will continue to pull FIBs off
1399  *      until the queue is empty. When the queue is empty it will wait for
1400  *      more FIBs.
1401  */
1402
1403 int aac_command_thread(void *data)
1404 {
1405         struct aac_dev *dev = data;
1406         struct hw_fib *hw_fib, *hw_newfib;
1407         struct fib *fib, *newfib;
1408         struct aac_fib_context *fibctx;
1409         unsigned long flags;
1410         DECLARE_WAITQUEUE(wait, current);
1411         unsigned long next_jiffies = jiffies + HZ;
1412         unsigned long next_check_jiffies = next_jiffies;
1413         long difference = HZ;
1414
1415         /*
1416          *      We can only have one thread per adapter for AIF's.
1417          */
1418         if (dev->aif_thread)
1419                 return -EINVAL;
1420
1421         /*
1422          *      Let the DPC know it has a place to send the AIF's to.
1423          */
1424         dev->aif_thread = 1;
1425         add_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1426         set_current_state(TASK_INTERRUPTIBLE);
1427         dprintk ((KERN_INFO "aac_command_thread start\n"));
1428         while(1)
1429         {
1430                 spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1431                 while(!list_empty(&(dev->queues->queue[HostNormCmdQueue].cmdq))) {
1432                         struct list_head *entry;
1433                         struct aac_aifcmd * aifcmd;
1434
1435                         set_current_state(TASK_RUNNING);
1436
1437                         entry = dev->queues->queue[HostNormCmdQueue].cmdq.next;
1438                         list_del(entry);
1439
1440                         spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1441                         fib = list_entry(entry, struct fib, fiblink);
1442                         /*
1443                          *      We will process the FIB here or pass it to a
1444                          *      worker thread that is TBD. We Really can't
1445                          *      do anything at this point since we don't have
1446                          *      anything defined for this thread to do.
1447                          */
1448                         hw_fib = fib->hw_fib_va;
1449                         memset(fib, 0, sizeof(struct fib));
1450                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1451                         fib->size = sizeof( struct fib );
1452                         fib->hw_fib_va = hw_fib;
1453                         fib->data = hw_fib->data;
1454                         fib->dev = dev;
1455                         /*
1456                          *      We only handle AifRequest fibs from the adapter.
1457                          */
1458                         aifcmd = (struct aac_aifcmd *) hw_fib->data;
1459                         if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
1460                                 /* Handle Driver Notify Events */
1461                                 aac_handle_aif(dev, fib);
1462                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1463                                 aac_fib_adapter_complete(fib, (u16)sizeof(u32));
1464                         } else {
1465                                 struct list_head *entry;
1466                                 /* The u32 here is important and intended. We are using
1467                                    32bit wrapping time to fit the adapter field */
1468
1469                                 u32 time_now, time_last;
1470                                 unsigned long flagv;
1471                                 unsigned num;
1472                                 struct hw_fib ** hw_fib_pool, ** hw_fib_p;
1473                                 struct fib ** fib_pool, ** fib_p;
1474
1475                                 /* Sniff events */
1476                                 if ((aifcmd->command ==
1477                                      cpu_to_le32(AifCmdEventNotify)) ||
1478                                     (aifcmd->command ==
1479                                      cpu_to_le32(AifCmdJobProgress))) {
1480                                         aac_handle_aif(dev, fib);
1481                                 }
1482
1483                                 time_now = jiffies/HZ;
1484
1485                                 /*
1486                                  * Warning: no sleep allowed while
1487                                  * holding spinlock. We take the estimate
1488                                  * and pre-allocate a set of fibs outside the
1489                                  * lock.
1490                                  */
1491                                 num = le32_to_cpu(dev->init->AdapterFibsSize)
1492                                     / sizeof(struct hw_fib); /* some extra */
1493                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1494                                 entry = dev->fib_list.next;
1495                                 while (entry != &dev->fib_list) {
1496                                         entry = entry->next;
1497                                         ++num;
1498                                 }
1499                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1500                                 hw_fib_pool = NULL;
1501                                 fib_pool = NULL;
1502                                 if (num
1503                                  && ((hw_fib_pool = kmalloc(sizeof(struct hw_fib *) * num, GFP_KERNEL)))
1504                                  && ((fib_pool = kmalloc(sizeof(struct fib *) * num, GFP_KERNEL)))) {
1505                                         hw_fib_p = hw_fib_pool;
1506                                         fib_p = fib_pool;
1507                                         while (hw_fib_p < &hw_fib_pool[num]) {
1508                                                 if (!(*(hw_fib_p++) = kmalloc(sizeof(struct hw_fib), GFP_KERNEL))) {
1509                                                         --hw_fib_p;
1510                                                         break;
1511                                                 }
1512                                                 if (!(*(fib_p++) = kmalloc(sizeof(struct fib), GFP_KERNEL))) {
1513                                                         kfree(*(--hw_fib_p));
1514                                                         break;
1515                                                 }
1516                                         }
1517                                         if ((num = hw_fib_p - hw_fib_pool) == 0) {
1518                                                 kfree(fib_pool);
1519                                                 fib_pool = NULL;
1520                                                 kfree(hw_fib_pool);
1521                                                 hw_fib_pool = NULL;
1522                                         }
1523                                 } else {
1524                                         kfree(hw_fib_pool);
1525                                         hw_fib_pool = NULL;
1526                                 }
1527                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1528                                 entry = dev->fib_list.next;
1529                                 /*
1530                                  * For each Context that is on the
1531                                  * fibctxList, make a copy of the
1532                                  * fib, and then set the event to wake up the
1533                                  * thread that is waiting for it.
1534                                  */
1535                                 hw_fib_p = hw_fib_pool;
1536                                 fib_p = fib_pool;
1537                                 while (entry != &dev->fib_list) {
1538                                         /*
1539                                          * Extract the fibctx
1540                                          */
1541                                         fibctx = list_entry(entry, struct aac_fib_context, next);
1542                                         /*
1543                                          * Check if the queue is getting
1544                                          * backlogged
1545                                          */
1546                                         if (fibctx->count > 20)
1547                                         {
1548                                                 /*
1549                                                  * It's *not* jiffies folks,
1550                                                  * but jiffies / HZ so do not
1551                                                  * panic ...
1552                                                  */
1553                                                 time_last = fibctx->jiffies;
1554                                                 /*
1555                                                  * Has it been > 2 minutes
1556                                                  * since the last read off
1557                                                  * the queue?
1558                                                  */
1559                                                 if ((time_now - time_last) > aif_timeout) {
1560                                                         entry = entry->next;
1561                                                         aac_close_fib_context(dev, fibctx);
1562                                                         continue;
1563                                                 }
1564                                         }
1565                                         /*
1566                                          * Warning: no sleep allowed while
1567                                          * holding spinlock
1568                                          */
1569                                         if (hw_fib_p < &hw_fib_pool[num]) {
1570                                                 hw_newfib = *hw_fib_p;
1571                                                 *(hw_fib_p++) = NULL;
1572                                                 newfib = *fib_p;
1573                                                 *(fib_p++) = NULL;
1574                                                 /*
1575                                                  * Make the copy of the FIB
1576                                                  */
1577                                                 memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
1578                                                 memcpy(newfib, fib, sizeof(struct fib));
1579                                                 newfib->hw_fib_va = hw_newfib;
1580                                                 /*
1581                                                  * Put the FIB onto the
1582                                                  * fibctx's fibs
1583                                                  */
1584                                                 list_add_tail(&newfib->fiblink, &fibctx->fib_list);
1585                                                 fibctx->count++;
1586                                                 /*
1587                                                  * Set the event to wake up the
1588                                                  * thread that is waiting.
1589                                                  */
1590                                                 up(&fibctx->wait_sem);
1591                                         } else {
1592                                                 printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1593                                         }
1594                                         entry = entry->next;
1595                                 }
1596                                 /*
1597                                  *      Set the status of this FIB
1598                                  */
1599                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1600                                 aac_fib_adapter_complete(fib, sizeof(u32));
1601                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1602                                 /* Free up the remaining resources */
1603                                 hw_fib_p = hw_fib_pool;
1604                                 fib_p = fib_pool;
1605                                 while (hw_fib_p < &hw_fib_pool[num]) {
1606                                         kfree(*hw_fib_p);
1607                                         kfree(*fib_p);
1608                                         ++fib_p;
1609                                         ++hw_fib_p;
1610                                 }
1611                                 kfree(hw_fib_pool);
1612                                 kfree(fib_pool);
1613                         }
1614                         kfree(fib);
1615                         spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1616                 }
1617                 /*
1618                  *      There are no more AIF's
1619                  */
1620                 spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1621
1622                 /*
1623                  *      Background activity
1624                  */
1625                 if ((time_before(next_check_jiffies,next_jiffies))
1626                  && ((difference = next_check_jiffies - jiffies) <= 0)) {
1627                         next_check_jiffies = next_jiffies;
1628                         if (aac_check_health(dev) == 0) {
1629                                 difference = ((long)(unsigned)check_interval)
1630                                            * HZ;
1631                                 next_check_jiffies = jiffies + difference;
1632                         } else if (!dev->queues)
1633                                 break;
1634                 }
1635                 if (!time_before(next_check_jiffies,next_jiffies)
1636                  && ((difference = next_jiffies - jiffies) <= 0)) {
1637                         struct timeval now;
1638                         int ret;
1639
1640                         /* Don't even try to talk to adapter if its sick */
1641                         ret = aac_check_health(dev);
1642                         if (!ret && !dev->queues)
1643                                 break;
1644                         next_check_jiffies = jiffies
1645                                            + ((long)(unsigned)check_interval)
1646                                            * HZ;
1647                         do_gettimeofday(&now);
1648
1649                         /* Synchronize our watches */
1650                         if (((1000000 - (1000000 / HZ)) > now.tv_usec)
1651                          && (now.tv_usec > (1000000 / HZ)))
1652                                 difference = (((1000000 - now.tv_usec) * HZ)
1653                                   + 500000) / 1000000;
1654                         else if (ret == 0) {
1655                                 struct fib *fibptr;
1656
1657                                 if ((fibptr = aac_fib_alloc(dev))) {
1658                                         u32 * info;
1659
1660                                         aac_fib_init(fibptr);
1661
1662                                         info = (u32 *) fib_data(fibptr);
1663                                         if (now.tv_usec > 500000)
1664                                                 ++now.tv_sec;
1665
1666                                         *info = cpu_to_le32(now.tv_sec);
1667
1668                                         (void)aac_fib_send(SendHostTime,
1669                                                 fibptr,
1670                                                 sizeof(*info),
1671                                                 FsaNormal,
1672                                                 1, 1,
1673                                                 NULL,
1674                                                 NULL);
1675                                         aac_fib_complete(fibptr);
1676                                         aac_fib_free(fibptr);
1677                                 }
1678                                 difference = (long)(unsigned)update_interval*HZ;
1679                         } else {
1680                                 /* retry shortly */
1681                                 difference = 10 * HZ;
1682                         }
1683                         next_jiffies = jiffies + difference;
1684                         if (time_before(next_check_jiffies,next_jiffies))
1685                                 difference = next_check_jiffies - jiffies;
1686                 }
1687                 if (difference <= 0)
1688                         difference = 1;
1689                 set_current_state(TASK_INTERRUPTIBLE);
1690                 schedule_timeout(difference);
1691
1692                 if (kthread_should_stop())
1693                         break;
1694         }
1695         if (dev->queues)
1696                 remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1697         dev->aif_thread = 0;
1698         return 0;
1699 }