Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git...
[sfrench/cifs-2.6.git] / drivers / power / supply / bq25890_charger.c
1 /*
2  * TI BQ25890 charger driver
3  *
4  * Copyright (C) 2015 Intel Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  */
17
18 #include <linux/module.h>
19 #include <linux/i2c.h>
20 #include <linux/power_supply.h>
21 #include <linux/regmap.h>
22 #include <linux/types.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/interrupt.h>
25 #include <linux/delay.h>
26 #include <linux/usb/phy.h>
27
28 #include <linux/acpi.h>
29 #include <linux/of.h>
30
31 #define BQ25890_MANUFACTURER            "Texas Instruments"
32 #define BQ25890_IRQ_PIN                 "bq25890_irq"
33
34 #define BQ25890_ID                      3
35 #define BQ25896_ID                      0
36
37 enum bq25890_fields {
38         F_EN_HIZ, F_EN_ILIM, F_IILIM,                                /* Reg00 */
39         F_BHOT, F_BCOLD, F_VINDPM_OFS,                               /* Reg01 */
40         F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
41         F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN,          /* Reg02 */
42         F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,    /* Reg03 */
43         F_PUMPX_EN, F_ICHG,                                          /* Reg04 */
44         F_IPRECHG, F_ITERM,                                          /* Reg05 */
45         F_VREG, F_BATLOWV, F_VRECHG,                                 /* Reg06 */
46         F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR,
47         F_JEITA_ISET,                                                /* Reg07 */
48         F_BATCMP, F_VCLAMP, F_TREG,                                  /* Reg08 */
49         F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
50         F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN,       /* Reg09 */
51         F_BOOSTV, F_BOOSTI,                                          /* Reg0A */
52         F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_VSYS_STAT, /* Reg0B */
53         F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
54         F_NTC_FAULT,                                                 /* Reg0C */
55         F_FORCE_VINDPM, F_VINDPM,                                    /* Reg0D */
56         F_THERM_STAT, F_BATV,                                        /* Reg0E */
57         F_SYSV,                                                      /* Reg0F */
58         F_TSPCT,                                                     /* Reg10 */
59         F_VBUS_GD, F_VBUSV,                                          /* Reg11 */
60         F_ICHGR,                                                     /* Reg12 */
61         F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM,                        /* Reg13 */
62         F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV,   /* Reg14 */
63
64         F_MAX_FIELDS
65 };
66
67 /* initial field values, converted to register values */
68 struct bq25890_init_data {
69         u8 ichg;        /* charge current               */
70         u8 vreg;        /* regulation voltage           */
71         u8 iterm;       /* termination current          */
72         u8 iprechg;     /* precharge current            */
73         u8 sysvmin;     /* minimum system voltage limit */
74         u8 boostv;      /* boost regulation voltage     */
75         u8 boosti;      /* boost current limit          */
76         u8 boostf;      /* boost frequency              */
77         u8 ilim_en;     /* enable ILIM pin              */
78         u8 treg;        /* thermal regulation threshold */
79 };
80
81 struct bq25890_state {
82         u8 online;
83         u8 chrg_status;
84         u8 chrg_fault;
85         u8 vsys_status;
86         u8 boost_fault;
87         u8 bat_fault;
88 };
89
90 struct bq25890_device {
91         struct i2c_client *client;
92         struct device *dev;
93         struct power_supply *charger;
94
95         struct usb_phy *usb_phy;
96         struct notifier_block usb_nb;
97         struct work_struct usb_work;
98         unsigned long usb_event;
99
100         struct regmap *rmap;
101         struct regmap_field *rmap_fields[F_MAX_FIELDS];
102
103         int chip_id;
104         struct bq25890_init_data init_data;
105         struct bq25890_state state;
106
107         struct mutex lock; /* protect state data */
108 };
109
110 static const struct regmap_range bq25890_readonly_reg_ranges[] = {
111         regmap_reg_range(0x0b, 0x0c),
112         regmap_reg_range(0x0e, 0x13),
113 };
114
115 static const struct regmap_access_table bq25890_writeable_regs = {
116         .no_ranges = bq25890_readonly_reg_ranges,
117         .n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges),
118 };
119
120 static const struct regmap_range bq25890_volatile_reg_ranges[] = {
121         regmap_reg_range(0x00, 0x00),
122         regmap_reg_range(0x09, 0x09),
123         regmap_reg_range(0x0b, 0x0c),
124         regmap_reg_range(0x0e, 0x14),
125 };
126
127 static const struct regmap_access_table bq25890_volatile_regs = {
128         .yes_ranges = bq25890_volatile_reg_ranges,
129         .n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges),
130 };
131
132 static const struct regmap_config bq25890_regmap_config = {
133         .reg_bits = 8,
134         .val_bits = 8,
135
136         .max_register = 0x14,
137         .cache_type = REGCACHE_RBTREE,
138
139         .wr_table = &bq25890_writeable_regs,
140         .volatile_table = &bq25890_volatile_regs,
141 };
142
143 static const struct reg_field bq25890_reg_fields[] = {
144         /* REG00 */
145         [F_EN_HIZ]              = REG_FIELD(0x00, 7, 7),
146         [F_EN_ILIM]             = REG_FIELD(0x00, 6, 6),
147         [F_IILIM]               = REG_FIELD(0x00, 0, 5),
148         /* REG01 */
149         [F_BHOT]                = REG_FIELD(0x01, 6, 7),
150         [F_BCOLD]               = REG_FIELD(0x01, 5, 5),
151         [F_VINDPM_OFS]          = REG_FIELD(0x01, 0, 4),
152         /* REG02 */
153         [F_CONV_START]          = REG_FIELD(0x02, 7, 7),
154         [F_CONV_RATE]           = REG_FIELD(0x02, 6, 6),
155         [F_BOOSTF]              = REG_FIELD(0x02, 5, 5),
156         [F_ICO_EN]              = REG_FIELD(0x02, 4, 4),
157         [F_HVDCP_EN]            = REG_FIELD(0x02, 3, 3),  // reserved on BQ25896
158         [F_MAXC_EN]             = REG_FIELD(0x02, 2, 2),  // reserved on BQ25896
159         [F_FORCE_DPM]           = REG_FIELD(0x02, 1, 1),
160         [F_AUTO_DPDM_EN]        = REG_FIELD(0x02, 0, 0),
161         /* REG03 */
162         [F_BAT_LOAD_EN]         = REG_FIELD(0x03, 7, 7),
163         [F_WD_RST]              = REG_FIELD(0x03, 6, 6),
164         [F_OTG_CFG]             = REG_FIELD(0x03, 5, 5),
165         [F_CHG_CFG]             = REG_FIELD(0x03, 4, 4),
166         [F_SYSVMIN]             = REG_FIELD(0x03, 1, 3),
167         /* MIN_VBAT_SEL on BQ25896 */
168         /* REG04 */
169         [F_PUMPX_EN]            = REG_FIELD(0x04, 7, 7),
170         [F_ICHG]                = REG_FIELD(0x04, 0, 6),
171         /* REG05 */
172         [F_IPRECHG]             = REG_FIELD(0x05, 4, 7),
173         [F_ITERM]               = REG_FIELD(0x05, 0, 3),
174         /* REG06 */
175         [F_VREG]                = REG_FIELD(0x06, 2, 7),
176         [F_BATLOWV]             = REG_FIELD(0x06, 1, 1),
177         [F_VRECHG]              = REG_FIELD(0x06, 0, 0),
178         /* REG07 */
179         [F_TERM_EN]             = REG_FIELD(0x07, 7, 7),
180         [F_STAT_DIS]            = REG_FIELD(0x07, 6, 6),
181         [F_WD]                  = REG_FIELD(0x07, 4, 5),
182         [F_TMR_EN]              = REG_FIELD(0x07, 3, 3),
183         [F_CHG_TMR]             = REG_FIELD(0x07, 1, 2),
184         [F_JEITA_ISET]          = REG_FIELD(0x07, 0, 0),
185         /* REG08 */
186         [F_BATCMP]              = REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896
187         [F_VCLAMP]              = REG_FIELD(0x08, 2, 4),
188         [F_TREG]                = REG_FIELD(0x08, 0, 1),
189         /* REG09 */
190         [F_FORCE_ICO]           = REG_FIELD(0x09, 7, 7),
191         [F_TMR2X_EN]            = REG_FIELD(0x09, 6, 6),
192         [F_BATFET_DIS]          = REG_FIELD(0x09, 5, 5),
193         [F_JEITA_VSET]          = REG_FIELD(0x09, 4, 4),
194         [F_BATFET_DLY]          = REG_FIELD(0x09, 3, 3),
195         [F_BATFET_RST_EN]       = REG_FIELD(0x09, 2, 2),
196         [F_PUMPX_UP]            = REG_FIELD(0x09, 1, 1),
197         [F_PUMPX_DN]            = REG_FIELD(0x09, 0, 0),
198         /* REG0A */
199         [F_BOOSTV]              = REG_FIELD(0x0A, 4, 7),
200         /* PFM_OTG_DIS 3 on BQ25896 */
201         [F_BOOSTI]              = REG_FIELD(0x0A, 0, 2),
202         /* REG0B */
203         [F_VBUS_STAT]           = REG_FIELD(0x0B, 5, 7),
204         [F_CHG_STAT]            = REG_FIELD(0x0B, 3, 4),
205         [F_PG_STAT]             = REG_FIELD(0x0B, 2, 2),
206         [F_SDP_STAT]            = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
207         [F_VSYS_STAT]           = REG_FIELD(0x0B, 0, 0),
208         /* REG0C */
209         [F_WD_FAULT]            = REG_FIELD(0x0C, 7, 7),
210         [F_BOOST_FAULT]         = REG_FIELD(0x0C, 6, 6),
211         [F_CHG_FAULT]           = REG_FIELD(0x0C, 4, 5),
212         [F_BAT_FAULT]           = REG_FIELD(0x0C, 3, 3),
213         [F_NTC_FAULT]           = REG_FIELD(0x0C, 0, 2),
214         /* REG0D */
215         [F_FORCE_VINDPM]        = REG_FIELD(0x0D, 7, 7),
216         [F_VINDPM]              = REG_FIELD(0x0D, 0, 6),
217         /* REG0E */
218         [F_THERM_STAT]          = REG_FIELD(0x0E, 7, 7),
219         [F_BATV]                = REG_FIELD(0x0E, 0, 6),
220         /* REG0F */
221         [F_SYSV]                = REG_FIELD(0x0F, 0, 6),
222         /* REG10 */
223         [F_TSPCT]               = REG_FIELD(0x10, 0, 6),
224         /* REG11 */
225         [F_VBUS_GD]             = REG_FIELD(0x11, 7, 7),
226         [F_VBUSV]               = REG_FIELD(0x11, 0, 6),
227         /* REG12 */
228         [F_ICHGR]               = REG_FIELD(0x12, 0, 6),
229         /* REG13 */
230         [F_VDPM_STAT]           = REG_FIELD(0x13, 7, 7),
231         [F_IDPM_STAT]           = REG_FIELD(0x13, 6, 6),
232         [F_IDPM_LIM]            = REG_FIELD(0x13, 0, 5),
233         /* REG14 */
234         [F_REG_RST]             = REG_FIELD(0x14, 7, 7),
235         [F_ICO_OPTIMIZED]       = REG_FIELD(0x14, 6, 6),
236         [F_PN]                  = REG_FIELD(0x14, 3, 5),
237         [F_TS_PROFILE]          = REG_FIELD(0x14, 2, 2),
238         [F_DEV_REV]             = REG_FIELD(0x14, 0, 1)
239 };
240
241 /*
242  * Most of the val -> idx conversions can be computed, given the minimum,
243  * maximum and the step between values. For the rest of conversions, we use
244  * lookup tables.
245  */
246 enum bq25890_table_ids {
247         /* range tables */
248         TBL_ICHG,
249         TBL_ITERM,
250         TBL_VREG,
251         TBL_BOOSTV,
252         TBL_SYSVMIN,
253
254         /* lookup tables */
255         TBL_TREG,
256         TBL_BOOSTI,
257 };
258
259 /* Thermal Regulation Threshold lookup table, in degrees Celsius */
260 static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 };
261
262 #define BQ25890_TREG_TBL_SIZE           ARRAY_SIZE(bq25890_treg_tbl)
263
264 /* Boost mode current limit lookup table, in uA */
265 static const u32 bq25890_boosti_tbl[] = {
266         500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000
267 };
268
269 #define BQ25890_BOOSTI_TBL_SIZE         ARRAY_SIZE(bq25890_boosti_tbl)
270
271 struct bq25890_range {
272         u32 min;
273         u32 max;
274         u32 step;
275 };
276
277 struct bq25890_lookup {
278         const u32 *tbl;
279         u32 size;
280 };
281
282 static const union {
283         struct bq25890_range  rt;
284         struct bq25890_lookup lt;
285 } bq25890_tables[] = {
286         /* range tables */
287         [TBL_ICHG] =    { .rt = {0,       5056000, 64000} },     /* uA */
288         [TBL_ITERM] =   { .rt = {64000,   1024000, 64000} },     /* uA */
289         [TBL_VREG] =    { .rt = {3840000, 4608000, 16000} },     /* uV */
290         [TBL_BOOSTV] =  { .rt = {4550000, 5510000, 64000} },     /* uV */
291         [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },    /* uV */
292
293         /* lookup tables */
294         [TBL_TREG] =    { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
295         [TBL_BOOSTI] =  { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} }
296 };
297
298 static int bq25890_field_read(struct bq25890_device *bq,
299                               enum bq25890_fields field_id)
300 {
301         int ret;
302         int val;
303
304         ret = regmap_field_read(bq->rmap_fields[field_id], &val);
305         if (ret < 0)
306                 return ret;
307
308         return val;
309 }
310
311 static int bq25890_field_write(struct bq25890_device *bq,
312                                enum bq25890_fields field_id, u8 val)
313 {
314         return regmap_field_write(bq->rmap_fields[field_id], val);
315 }
316
317 static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id)
318 {
319         u8 idx;
320
321         if (id >= TBL_TREG) {
322                 const u32 *tbl = bq25890_tables[id].lt.tbl;
323                 u32 tbl_size = bq25890_tables[id].lt.size;
324
325                 for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++)
326                         ;
327         } else {
328                 const struct bq25890_range *rtbl = &bq25890_tables[id].rt;
329                 u8 rtbl_size;
330
331                 rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1;
332
333                 for (idx = 1;
334                      idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value);
335                      idx++)
336                         ;
337         }
338
339         return idx - 1;
340 }
341
342 static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id)
343 {
344         const struct bq25890_range *rtbl;
345
346         /* lookup table? */
347         if (id >= TBL_TREG)
348                 return bq25890_tables[id].lt.tbl[idx];
349
350         /* range table */
351         rtbl = &bq25890_tables[id].rt;
352
353         return (rtbl->min + idx * rtbl->step);
354 }
355
356 enum bq25890_status {
357         STATUS_NOT_CHARGING,
358         STATUS_PRE_CHARGING,
359         STATUS_FAST_CHARGING,
360         STATUS_TERMINATION_DONE,
361 };
362
363 enum bq25890_chrg_fault {
364         CHRG_FAULT_NORMAL,
365         CHRG_FAULT_INPUT,
366         CHRG_FAULT_THERMAL_SHUTDOWN,
367         CHRG_FAULT_TIMER_EXPIRED,
368 };
369
370 static int bq25890_power_supply_get_property(struct power_supply *psy,
371                                              enum power_supply_property psp,
372                                              union power_supply_propval *val)
373 {
374         int ret;
375         struct bq25890_device *bq = power_supply_get_drvdata(psy);
376         struct bq25890_state state;
377
378         mutex_lock(&bq->lock);
379         state = bq->state;
380         mutex_unlock(&bq->lock);
381
382         switch (psp) {
383         case POWER_SUPPLY_PROP_STATUS:
384                 if (!state.online)
385                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
386                 else if (state.chrg_status == STATUS_NOT_CHARGING)
387                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
388                 else if (state.chrg_status == STATUS_PRE_CHARGING ||
389                          state.chrg_status == STATUS_FAST_CHARGING)
390                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
391                 else if (state.chrg_status == STATUS_TERMINATION_DONE)
392                         val->intval = POWER_SUPPLY_STATUS_FULL;
393                 else
394                         val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
395
396                 break;
397
398         case POWER_SUPPLY_PROP_MANUFACTURER:
399                 val->strval = BQ25890_MANUFACTURER;
400                 break;
401
402         case POWER_SUPPLY_PROP_MODEL_NAME:
403                 if (bq->chip_id == BQ25890_ID)
404                         val->strval = "BQ25890";
405                 else if (bq->chip_id == BQ25896_ID)
406                         val->strval = "BQ25896";
407                 else
408                         val->strval = "UNKNOWN";
409
410                 break;
411
412         case POWER_SUPPLY_PROP_ONLINE:
413                 val->intval = state.online;
414                 break;
415
416         case POWER_SUPPLY_PROP_HEALTH:
417                 if (!state.chrg_fault && !state.bat_fault && !state.boost_fault)
418                         val->intval = POWER_SUPPLY_HEALTH_GOOD;
419                 else if (state.bat_fault)
420                         val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
421                 else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED)
422                         val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
423                 else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN)
424                         val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
425                 else
426                         val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
427                 break;
428
429         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
430                 ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
431                 if (ret < 0)
432                         return ret;
433
434                 /* converted_val = ADC_val * 50mA (table 10.3.19) */
435                 val->intval = ret * 50000;
436                 break;
437
438         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
439                 val->intval = bq25890_tables[TBL_ICHG].rt.max;
440                 break;
441
442         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
443                 if (!state.online) {
444                         val->intval = 0;
445                         break;
446                 }
447
448                 ret = bq25890_field_read(bq, F_BATV); /* read measured value */
449                 if (ret < 0)
450                         return ret;
451
452                 /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
453                 val->intval = 2304000 + ret * 20000;
454                 break;
455
456         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
457                 val->intval = bq25890_tables[TBL_VREG].rt.max;
458                 break;
459
460         case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
461                 val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
462                 break;
463
464         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
465                 ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
466                 if (ret < 0)
467                         return ret;
468
469                 /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
470                 val->intval = 2304000 + ret * 20000;
471                 break;
472
473         default:
474                 return -EINVAL;
475         }
476
477         return 0;
478 }
479
480 static int bq25890_get_chip_state(struct bq25890_device *bq,
481                                   struct bq25890_state *state)
482 {
483         int i, ret;
484
485         struct {
486                 enum bq25890_fields id;
487                 u8 *data;
488         } state_fields[] = {
489                 {F_CHG_STAT,    &state->chrg_status},
490                 {F_PG_STAT,     &state->online},
491                 {F_VSYS_STAT,   &state->vsys_status},
492                 {F_BOOST_FAULT, &state->boost_fault},
493                 {F_BAT_FAULT,   &state->bat_fault},
494                 {F_CHG_FAULT,   &state->chrg_fault}
495         };
496
497         for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
498                 ret = bq25890_field_read(bq, state_fields[i].id);
499                 if (ret < 0)
500                         return ret;
501
502                 *state_fields[i].data = ret;
503         }
504
505         dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n",
506                 state->chrg_status, state->online, state->vsys_status,
507                 state->chrg_fault, state->boost_fault, state->bat_fault);
508
509         return 0;
510 }
511
512 static bool bq25890_state_changed(struct bq25890_device *bq,
513                                   struct bq25890_state *new_state)
514 {
515         struct bq25890_state old_state;
516
517         mutex_lock(&bq->lock);
518         old_state = bq->state;
519         mutex_unlock(&bq->lock);
520
521         return (old_state.chrg_status != new_state->chrg_status ||
522                 old_state.chrg_fault != new_state->chrg_fault   ||
523                 old_state.online != new_state->online           ||
524                 old_state.bat_fault != new_state->bat_fault     ||
525                 old_state.boost_fault != new_state->boost_fault ||
526                 old_state.vsys_status != new_state->vsys_status);
527 }
528
529 static void bq25890_handle_state_change(struct bq25890_device *bq,
530                                         struct bq25890_state *new_state)
531 {
532         int ret;
533         struct bq25890_state old_state;
534
535         mutex_lock(&bq->lock);
536         old_state = bq->state;
537         mutex_unlock(&bq->lock);
538
539         if (!new_state->online) {                            /* power removed */
540                 /* disable ADC */
541                 ret = bq25890_field_write(bq, F_CONV_START, 0);
542                 if (ret < 0)
543                         goto error;
544         } else if (!old_state.online) {                     /* power inserted */
545                 /* enable ADC, to have control of charge current/voltage */
546                 ret = bq25890_field_write(bq, F_CONV_START, 1);
547                 if (ret < 0)
548                         goto error;
549         }
550
551         return;
552
553 error:
554         dev_err(bq->dev, "Error communicating with the chip.\n");
555 }
556
557 static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
558 {
559         struct bq25890_device *bq = private;
560         int ret;
561         struct bq25890_state state;
562
563         ret = bq25890_get_chip_state(bq, &state);
564         if (ret < 0)
565                 goto handled;
566
567         if (!bq25890_state_changed(bq, &state))
568                 goto handled;
569
570         bq25890_handle_state_change(bq, &state);
571
572         mutex_lock(&bq->lock);
573         bq->state = state;
574         mutex_unlock(&bq->lock);
575
576         power_supply_changed(bq->charger);
577
578 handled:
579         return IRQ_HANDLED;
580 }
581
582 static int bq25890_chip_reset(struct bq25890_device *bq)
583 {
584         int ret;
585         int rst_check_counter = 10;
586
587         ret = bq25890_field_write(bq, F_REG_RST, 1);
588         if (ret < 0)
589                 return ret;
590
591         do {
592                 ret = bq25890_field_read(bq, F_REG_RST);
593                 if (ret < 0)
594                         return ret;
595
596                 usleep_range(5, 10);
597         } while (ret == 1 && --rst_check_counter);
598
599         if (!rst_check_counter)
600                 return -ETIMEDOUT;
601
602         return 0;
603 }
604
605 static int bq25890_hw_init(struct bq25890_device *bq)
606 {
607         int ret;
608         int i;
609         struct bq25890_state state;
610
611         const struct {
612                 enum bq25890_fields id;
613                 u32 value;
614         } init_data[] = {
615                 {F_ICHG,         bq->init_data.ichg},
616                 {F_VREG,         bq->init_data.vreg},
617                 {F_ITERM,        bq->init_data.iterm},
618                 {F_IPRECHG,      bq->init_data.iprechg},
619                 {F_SYSVMIN,      bq->init_data.sysvmin},
620                 {F_BOOSTV,       bq->init_data.boostv},
621                 {F_BOOSTI,       bq->init_data.boosti},
622                 {F_BOOSTF,       bq->init_data.boostf},
623                 {F_EN_ILIM,      bq->init_data.ilim_en},
624                 {F_TREG,         bq->init_data.treg}
625         };
626
627         ret = bq25890_chip_reset(bq);
628         if (ret < 0) {
629                 dev_dbg(bq->dev, "Reset failed %d\n", ret);
630                 return ret;
631         }
632
633         /* disable watchdog */
634         ret = bq25890_field_write(bq, F_WD, 0);
635         if (ret < 0) {
636                 dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret);
637                 return ret;
638         }
639
640         /* initialize currents/voltages and other parameters */
641         for (i = 0; i < ARRAY_SIZE(init_data); i++) {
642                 ret = bq25890_field_write(bq, init_data[i].id,
643                                           init_data[i].value);
644                 if (ret < 0) {
645                         dev_dbg(bq->dev, "Writing init data failed %d\n", ret);
646                         return ret;
647                 }
648         }
649
650         /* Configure ADC for continuous conversions. This does not enable it. */
651         ret = bq25890_field_write(bq, F_CONV_RATE, 1);
652         if (ret < 0) {
653                 dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
654                 return ret;
655         }
656
657         ret = bq25890_get_chip_state(bq, &state);
658         if (ret < 0) {
659                 dev_dbg(bq->dev, "Get state failed %d\n", ret);
660                 return ret;
661         }
662
663         mutex_lock(&bq->lock);
664         bq->state = state;
665         mutex_unlock(&bq->lock);
666
667         return 0;
668 }
669
670 static enum power_supply_property bq25890_power_supply_props[] = {
671         POWER_SUPPLY_PROP_MANUFACTURER,
672         POWER_SUPPLY_PROP_MODEL_NAME,
673         POWER_SUPPLY_PROP_STATUS,
674         POWER_SUPPLY_PROP_ONLINE,
675         POWER_SUPPLY_PROP_HEALTH,
676         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
677         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
678         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
679         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
680         POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
681         POWER_SUPPLY_PROP_VOLTAGE_NOW,
682 };
683
684 static char *bq25890_charger_supplied_to[] = {
685         "main-battery",
686 };
687
688 static const struct power_supply_desc bq25890_power_supply_desc = {
689         .name = "bq25890-charger",
690         .type = POWER_SUPPLY_TYPE_USB,
691         .properties = bq25890_power_supply_props,
692         .num_properties = ARRAY_SIZE(bq25890_power_supply_props),
693         .get_property = bq25890_power_supply_get_property,
694 };
695
696 static int bq25890_power_supply_init(struct bq25890_device *bq)
697 {
698         struct power_supply_config psy_cfg = { .drv_data = bq, };
699
700         psy_cfg.supplied_to = bq25890_charger_supplied_to;
701         psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to);
702
703         bq->charger = power_supply_register(bq->dev, &bq25890_power_supply_desc,
704                                             &psy_cfg);
705
706         return PTR_ERR_OR_ZERO(bq->charger);
707 }
708
709 static void bq25890_usb_work(struct work_struct *data)
710 {
711         int ret;
712         struct bq25890_device *bq =
713                         container_of(data, struct bq25890_device, usb_work);
714
715         switch (bq->usb_event) {
716         case USB_EVENT_ID:
717                 /* Enable boost mode */
718                 ret = bq25890_field_write(bq, F_OTG_CFG, 1);
719                 if (ret < 0)
720                         goto error;
721                 break;
722
723         case USB_EVENT_NONE:
724                 /* Disable boost mode */
725                 ret = bq25890_field_write(bq, F_OTG_CFG, 0);
726                 if (ret < 0)
727                         goto error;
728
729                 power_supply_changed(bq->charger);
730                 break;
731         }
732
733         return;
734
735 error:
736         dev_err(bq->dev, "Error switching to boost/charger mode.\n");
737 }
738
739 static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
740                                 void *priv)
741 {
742         struct bq25890_device *bq =
743                         container_of(nb, struct bq25890_device, usb_nb);
744
745         bq->usb_event = val;
746         queue_work(system_power_efficient_wq, &bq->usb_work);
747
748         return NOTIFY_OK;
749 }
750
751 static int bq25890_irq_probe(struct bq25890_device *bq)
752 {
753         struct gpio_desc *irq;
754
755         irq = devm_gpiod_get(bq->dev, BQ25890_IRQ_PIN, GPIOD_IN);
756         if (IS_ERR(irq)) {
757                 dev_err(bq->dev, "Could not probe irq pin.\n");
758                 return PTR_ERR(irq);
759         }
760
761         return gpiod_to_irq(irq);
762 }
763
764 static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
765 {
766         int ret;
767         u32 property;
768         int i;
769         struct bq25890_init_data *init = &bq->init_data;
770         struct {
771                 char *name;
772                 bool optional;
773                 enum bq25890_table_ids tbl_id;
774                 u8 *conv_data; /* holds converted value from given property */
775         } props[] = {
776                 /* required properties */
777                 {"ti,charge-current", false, TBL_ICHG, &init->ichg},
778                 {"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg},
779                 {"ti,termination-current", false, TBL_ITERM, &init->iterm},
780                 {"ti,precharge-current", false, TBL_ITERM, &init->iprechg},
781                 {"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin},
782                 {"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv},
783                 {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
784
785                 /* optional properties */
786                 {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}
787         };
788
789         /* initialize data for optional properties */
790         init->treg = 3; /* 120 degrees Celsius */
791
792         for (i = 0; i < ARRAY_SIZE(props); i++) {
793                 ret = device_property_read_u32(bq->dev, props[i].name,
794                                                &property);
795                 if (ret < 0) {
796                         if (props[i].optional)
797                                 continue;
798
799                         dev_err(bq->dev, "Unable to read property %d %s\n", ret,
800                                 props[i].name);
801
802                         return ret;
803                 }
804
805                 *props[i].conv_data = bq25890_find_idx(property,
806                                                        props[i].tbl_id);
807         }
808
809         return 0;
810 }
811
812 static int bq25890_fw_probe(struct bq25890_device *bq)
813 {
814         int ret;
815         struct bq25890_init_data *init = &bq->init_data;
816
817         ret = bq25890_fw_read_u32_props(bq);
818         if (ret < 0)
819                 return ret;
820
821         init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin");
822         init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq");
823
824         return 0;
825 }
826
827 static int bq25890_probe(struct i2c_client *client,
828                          const struct i2c_device_id *id)
829 {
830         struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
831         struct device *dev = &client->dev;
832         struct bq25890_device *bq;
833         int ret;
834         int i;
835
836         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
837                 dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
838                 return -ENODEV;
839         }
840
841         bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
842         if (!bq)
843                 return -ENOMEM;
844
845         bq->client = client;
846         bq->dev = dev;
847
848         mutex_init(&bq->lock);
849
850         bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config);
851         if (IS_ERR(bq->rmap)) {
852                 dev_err(dev, "failed to allocate register map\n");
853                 return PTR_ERR(bq->rmap);
854         }
855
856         for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) {
857                 const struct reg_field *reg_fields = bq25890_reg_fields;
858
859                 bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
860                                                              reg_fields[i]);
861                 if (IS_ERR(bq->rmap_fields[i])) {
862                         dev_err(dev, "cannot allocate regmap field\n");
863                         return PTR_ERR(bq->rmap_fields[i]);
864                 }
865         }
866
867         i2c_set_clientdata(client, bq);
868
869         bq->chip_id = bq25890_field_read(bq, F_PN);
870         if (bq->chip_id < 0) {
871                 dev_err(dev, "Cannot read chip ID.\n");
872                 return bq->chip_id;
873         }
874
875         if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
876                 dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
877                 return -ENODEV;
878         }
879
880         if (!dev->platform_data) {
881                 ret = bq25890_fw_probe(bq);
882                 if (ret < 0) {
883                         dev_err(dev, "Cannot read device properties.\n");
884                         return ret;
885                 }
886         } else {
887                 return -ENODEV;
888         }
889
890         ret = bq25890_hw_init(bq);
891         if (ret < 0) {
892                 dev_err(dev, "Cannot initialize the chip.\n");
893                 return ret;
894         }
895
896         if (client->irq <= 0)
897                 client->irq = bq25890_irq_probe(bq);
898
899         if (client->irq < 0) {
900                 dev_err(dev, "No irq resource found.\n");
901                 return client->irq;
902         }
903
904         /* OTG reporting */
905         bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
906         if (!IS_ERR_OR_NULL(bq->usb_phy)) {
907                 INIT_WORK(&bq->usb_work, bq25890_usb_work);
908                 bq->usb_nb.notifier_call = bq25890_usb_notifier;
909                 usb_register_notifier(bq->usb_phy, &bq->usb_nb);
910         }
911
912         ret = devm_request_threaded_irq(dev, client->irq, NULL,
913                                         bq25890_irq_handler_thread,
914                                         IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
915                                         BQ25890_IRQ_PIN, bq);
916         if (ret)
917                 goto irq_fail;
918
919         ret = bq25890_power_supply_init(bq);
920         if (ret < 0) {
921                 dev_err(dev, "Failed to register power supply\n");
922                 goto irq_fail;
923         }
924
925         return 0;
926
927 irq_fail:
928         if (!IS_ERR_OR_NULL(bq->usb_phy))
929                 usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
930
931         return ret;
932 }
933
934 static int bq25890_remove(struct i2c_client *client)
935 {
936         struct bq25890_device *bq = i2c_get_clientdata(client);
937
938         power_supply_unregister(bq->charger);
939
940         if (!IS_ERR_OR_NULL(bq->usb_phy))
941                 usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
942
943         /* reset all registers to default values */
944         bq25890_chip_reset(bq);
945
946         return 0;
947 }
948
949 #ifdef CONFIG_PM_SLEEP
950 static int bq25890_suspend(struct device *dev)
951 {
952         struct bq25890_device *bq = dev_get_drvdata(dev);
953
954         /*
955          * If charger is removed, while in suspend, make sure ADC is diabled
956          * since it consumes slightly more power.
957          */
958         return bq25890_field_write(bq, F_CONV_START, 0);
959 }
960
961 static int bq25890_resume(struct device *dev)
962 {
963         int ret;
964         struct bq25890_state state;
965         struct bq25890_device *bq = dev_get_drvdata(dev);
966
967         ret = bq25890_get_chip_state(bq, &state);
968         if (ret < 0)
969                 return ret;
970
971         mutex_lock(&bq->lock);
972         bq->state = state;
973         mutex_unlock(&bq->lock);
974
975         /* Re-enable ADC only if charger is plugged in. */
976         if (state.online) {
977                 ret = bq25890_field_write(bq, F_CONV_START, 1);
978                 if (ret < 0)
979                         return ret;
980         }
981
982         /* signal userspace, maybe state changed while suspended */
983         power_supply_changed(bq->charger);
984
985         return 0;
986 }
987 #endif
988
989 static const struct dev_pm_ops bq25890_pm = {
990         SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume)
991 };
992
993 static const struct i2c_device_id bq25890_i2c_ids[] = {
994         { "bq25890", 0 },
995         {},
996 };
997 MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
998
999 static const struct of_device_id bq25890_of_match[] = {
1000         { .compatible = "ti,bq25890", },
1001         { },
1002 };
1003 MODULE_DEVICE_TABLE(of, bq25890_of_match);
1004
1005 static const struct acpi_device_id bq25890_acpi_match[] = {
1006         {"BQ258900", 0},
1007         {},
1008 };
1009 MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
1010
1011 static struct i2c_driver bq25890_driver = {
1012         .driver = {
1013                 .name = "bq25890-charger",
1014                 .of_match_table = of_match_ptr(bq25890_of_match),
1015                 .acpi_match_table = ACPI_PTR(bq25890_acpi_match),
1016                 .pm = &bq25890_pm,
1017         },
1018         .probe = bq25890_probe,
1019         .remove = bq25890_remove,
1020         .id_table = bq25890_i2c_ids,
1021 };
1022 module_i2c_driver(bq25890_driver);
1023
1024 MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
1025 MODULE_DESCRIPTION("bq25890 charger driver");
1026 MODULE_LICENSE("GPL");