drivers/platform/x86/surface3_power.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Supports for the power IC on the Surface 3 tablet.
   4  *
   5  * (C) Copyright 2016-2018 Red Hat, Inc
   6  * (C) Copyright 2016-2018 Benjamin Tissoires <benjamin.tissoires@gmail.com>
   7  * (C) Copyright 2016 Stephen Just <stephenjust@gmail.com>
   8  *
   9  * This driver has been reverse-engineered by parsing the DSDT of the Surface 3
  10  * and looking at the registers of the chips.
  11  *
  12  * The DSDT allowed to find out that:
  13  * - the driver is required for the ACPI BAT0 device to communicate to the chip
  14  *   through an operation region.
  15  * - the various defines for the operation region functions to communicate with
  16  *   this driver
  17  * - the DSM 3f99e367-6220-4955-8b0f-06ef2ae79412 allows to trigger ACPI
  18  *   events to BAT0 (the code is all available in the DSDT).
  19  *
  20  * Further findings regarding the 2 chips declared in the MSHW0011 are:
  21  * - there are 2 chips declared:
  22  *   . 0x22 seems to control the ADP1 line status (and probably the charger)
  23  *   . 0x55 controls the battery directly
  24  * - the battery chip uses a SMBus protocol (using plain SMBus allows non
  25  *   destructive commands):
  26  *   . the commands/registers used are in the range 0x00..0x7F
  27  *   . if bit 8 (0x80) is set in the SMBus command, the returned value is the
  28  *     same as when it is not set. There is a high chance this bit is the
  29  *     read/write
  30  *   . the various registers semantic as been deduced by observing the register
  31  *     dumps.
  32  */
  33
  34 #include <linux/acpi.h>
  35 #include <linux/bits.h>
  36 #include <linux/freezer.h>
  37 #include <linux/i2c.h>
  38 #include <linux/kernel.h>
  39 #include <linux/kthread.h>
  40 #include <linux/slab.h>
  41 #include <linux/types.h>
  42 #include <linux/uuid.h>
  43 #include <asm/unaligned.h>
  44
  45 #define SURFACE_3_POLL_INTERVAL         (2 * HZ)
  46 #define SURFACE_3_STRLEN                10
  47
  48 struct mshw0011_data {
  49         struct i2c_client       *adp1;
  50         struct i2c_client       *bat0;
  51         unsigned short          notify_mask;
  52         struct task_struct      *poll_task;
  53         bool                    kthread_running;
  54
  55         bool                    charging;
  56         bool                    bat_charging;
  57         u8                      trip_point;
  58         s32                     full_capacity;
  59 };
  60
  61 struct mshw0011_handler_data {
  62         struct acpi_connection_info     info;
  63         struct i2c_client               *client;
  64 };
  65
  66 struct bix {
  67         u32     revision;
  68         u32     power_unit;
  69         u32     design_capacity;
  70         u32     last_full_charg_capacity;
  71         u32     battery_technology;
  72         u32     design_voltage;
  73         u32     design_capacity_of_warning;
  74         u32     design_capacity_of_low;
  75         u32     cycle_count;
  76         u32     measurement_accuracy;
  77         u32     max_sampling_time;
  78         u32     min_sampling_time;
  79         u32     max_average_interval;
  80         u32     min_average_interval;
  81         u32     battery_capacity_granularity_1;
  82         u32     battery_capacity_granularity_2;
  83         char    model[SURFACE_3_STRLEN];
  84         char    serial[SURFACE_3_STRLEN];
  85         char    type[SURFACE_3_STRLEN];
  86         char    OEM[SURFACE_3_STRLEN];
  87 } __packed;
  88
  89 struct bst {
  90         u32     battery_state;
  91         s32     battery_present_rate;
  92         u32     battery_remaining_capacity;
  93         u32     battery_present_voltage;
  94 } __packed;
  95
  96 struct gsb_command {
  97         u8      arg0;
  98         u8      arg1;
  99         u8      arg2;
 100 } __packed;
 101
 102 struct gsb_buffer {
 103         u8      status;
 104         u8      len;
 105         u8      ret;
 106         union {
 107                 struct gsb_command      cmd;
 108                 struct bst              bst;
 109                 struct bix              bix;
 110         } __packed;
 111 } __packed;
 112
 113 #define ACPI_BATTERY_STATE_DISCHARGING  BIT(0)
 114 #define ACPI_BATTERY_STATE_CHARGING     BIT(1)
 115 #define ACPI_BATTERY_STATE_CRITICAL     BIT(2)
 116
 117 #define MSHW0011_CMD_DEST_BAT0          0x01
 118 #define MSHW0011_CMD_DEST_ADP1          0x03
 119
 120 #define MSHW0011_CMD_BAT0_STA           0x01
 121 #define MSHW0011_CMD_BAT0_BIX           0x02
 122 #define MSHW0011_CMD_BAT0_BCT           0x03
 123 #define MSHW0011_CMD_BAT0_BTM           0x04
 124 #define MSHW0011_CMD_BAT0_BST           0x05
 125 #define MSHW0011_CMD_BAT0_BTP           0x06
 126 #define MSHW0011_CMD_ADP1_PSR           0x07
 127 #define MSHW0011_CMD_BAT0_PSOC          0x09
 128 #define MSHW0011_CMD_BAT0_PMAX          0x0a
 129 #define MSHW0011_CMD_BAT0_PSRC          0x0b
 130 #define MSHW0011_CMD_BAT0_CHGI          0x0c
 131 #define MSHW0011_CMD_BAT0_ARTG          0x0d
 132
 133 #define MSHW0011_NOTIFY_GET_VERSION     0x00
 134 #define MSHW0011_NOTIFY_ADP1            0x01
 135 #define MSHW0011_NOTIFY_BAT0_BST        0x02
 136 #define MSHW0011_NOTIFY_BAT0_BIX        0x05
 137
 138 #define MSHW0011_ADP1_REG_PSR           0x04
 139
 140 #define MSHW0011_BAT0_REG_CAPACITY              0x0c
 141 #define MSHW0011_BAT0_REG_FULL_CHG_CAPACITY     0x0e
 142 #define MSHW0011_BAT0_REG_DESIGN_CAPACITY       0x40
 143 #define MSHW0011_BAT0_REG_VOLTAGE       0x08
 144 #define MSHW0011_BAT0_REG_RATE          0x14
 145 #define MSHW0011_BAT0_REG_OEM           0x45
 146 #define MSHW0011_BAT0_REG_TYPE          0x4e
 147 #define MSHW0011_BAT0_REG_SERIAL_NO     0x56
 148 #define MSHW0011_BAT0_REG_CYCLE_CNT     0x6e
 149
 150 #define MSHW0011_EV_2_5_MASK            GENMASK(8, 0)
 151
 152 /* 3f99e367-6220-4955-8b0f-06ef2ae79412 */
 153 static const guid_t mshw0011_guid =
 154         GUID_INIT(0x3F99E367, 0x6220, 0x4955, 0x8B, 0x0F, 0x06, 0xEF,
 155                   0x2A, 0xE7, 0x94, 0x12);
 156
 157 static int
 158 mshw0011_notify(struct mshw0011_data *cdata, u8 arg1, u8 arg2,
 159                 unsigned int *ret_value)
 160 {
 161         union acpi_object *obj;
 162         struct acpi_device *adev;
 163         acpi_handle handle;
 164         unsigned int i;
 165
 166         handle = ACPI_HANDLE(&cdata->adp1->dev);
 167         if (!handle || acpi_bus_get_device(handle, &adev))
 168                 return -ENODEV;
 169
 170         obj = acpi_evaluate_dsm_typed(handle, &mshw0011_guid, arg1, arg2, NULL,
 171                                       ACPI_TYPE_BUFFER);
 172         if (!obj) {
 173                 dev_err(&cdata->adp1->dev, "device _DSM execution failed\n");
 174                 return -ENODEV;
 175         }
 176
 177         *ret_value = 0;
 178         for (i = 0; i < obj->buffer.length; i++)
 179                 *ret_value |= obj->buffer.pointer[i] << (i * 8);
 180
 181         ACPI_FREE(obj);
 182         return 0;
 183 }
 184
 185 static const struct bix default_bix = {
 186         .revision = 0x00,
 187         .power_unit = 0x01,
 188         .design_capacity = 0x1dca,
 189         .last_full_charg_capacity = 0x1dca,
 190         .battery_technology = 0x01,
 191         .design_voltage = 0x10df,
 192         .design_capacity_of_warning = 0x8f,
 193         .design_capacity_of_low = 0x47,
 194         .cycle_count = 0xffffffff,
 195         .measurement_accuracy = 0x00015f90,
 196         .max_sampling_time = 0x03e8,
 197         .min_sampling_time = 0x03e8,
 198         .max_average_interval = 0x03e8,
 199         .min_average_interval = 0x03e8,
 200         .battery_capacity_granularity_1 = 0x45,
 201         .battery_capacity_granularity_2 = 0x11,
 202         .model = "P11G8M",
 203         .serial = "",
 204         .type = "LION",
 205         .OEM = "",
 206 };
 207
 208 static int mshw0011_bix(struct mshw0011_data *cdata, struct bix *bix)
 209 {
 210         struct i2c_client *client = cdata->bat0;
 211         char buf[SURFACE_3_STRLEN];
 212         int ret;
 213
 214         *bix = default_bix;
 215
 216         /* get design capacity */
 217         ret = i2c_smbus_read_word_data(client,
 218                                        MSHW0011_BAT0_REG_DESIGN_CAPACITY);
 219         if (ret < 0) {
 220                 dev_err(&client->dev, "Error reading design capacity: %d\n",
 221                         ret);
 222                 return ret;
 223         }
 224         bix->design_capacity = ret;
 225
 226         /* get last full charge capacity */
 227         ret = i2c_smbus_read_word_data(client,
 228                                        MSHW0011_BAT0_REG_FULL_CHG_CAPACITY);
 229         if (ret < 0) {
 230                 dev_err(&client->dev,
 231                         "Error reading last full charge capacity: %d\n", ret);
 232                 return ret;
 233         }
 234         bix->last_full_charg_capacity = ret;
 235
 236         /* get serial number */
 237         ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO,
 238                                             sizeof(buf), buf);
 239         if (ret != sizeof(buf)) {
 240                 dev_err(&client->dev, "Error reading serial no: %d\n", ret);
 241                 return ret;
 242         }
 243         snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf);
 244
 245         /* get cycle count */
 246         ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT);
 247         if (ret < 0) {
 248                 dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
 249                 return ret;
 250         }
 251         bix->cycle_count = ret;
 252
 253         /* get OEM name */
 254         ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_OEM,
 255                                             4, buf);
 256         if (ret != 4) {
 257                 dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
 258                 return ret;
 259         }
 260         snprintf(bix->OEM, ARRAY_SIZE(bix->OEM), "%3pE", buf);
 261
 262         return 0;
 263 }
 264
 265 static int mshw0011_bst(struct mshw0011_data *cdata, struct bst *bst)
 266 {
 267         struct i2c_client *client = cdata->bat0;
 268         int rate, capacity, voltage, state;
 269         s16 tmp;
 270
 271         rate = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_RATE);
 272         if (rate < 0)
 273                 return rate;
 274
 275         capacity = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CAPACITY);
 276         if (capacity < 0)
 277                 return capacity;
 278
 279         voltage = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_VOLTAGE);
 280         if (voltage < 0)
 281                 return voltage;
 282
 283         tmp = rate;
 284         bst->battery_present_rate = abs((s32)tmp);
 285
 286         state = 0;
 287         if ((s32) tmp > 0)
 288                 state |= ACPI_BATTERY_STATE_CHARGING;
 289         else if ((s32) tmp < 0)
 290                 state |= ACPI_BATTERY_STATE_DISCHARGING;
 291         bst->battery_state = state;
 292
 293         bst->battery_remaining_capacity = capacity;
 294         bst->battery_present_voltage = voltage;
 295
 296         return 0;
 297 }
 298
 299 static int mshw0011_adp_psr(struct mshw0011_data *cdata)
 300 {
 301         return i2c_smbus_read_byte_data(cdata->adp1, MSHW0011_ADP1_REG_PSR);
 302 }
 303
 304 static int mshw0011_isr(struct mshw0011_data *cdata)
 305 {
 306         struct bst bst;
 307         struct bix bix;
 308         int ret;
 309         bool status, bat_status;
 310
 311         ret = mshw0011_adp_psr(cdata);
 312         if (ret < 0)
 313                 return ret;
 314
 315         status = ret;
 316         if (status != cdata->charging)
 317                 mshw0011_notify(cdata, cdata->notify_mask,
 318                                 MSHW0011_NOTIFY_ADP1, &ret);
 319
 320         cdata->charging = status;
 321
 322         ret = mshw0011_bst(cdata, &bst);
 323         if (ret < 0)
 324                 return ret;
 325
 326         bat_status = bst.battery_state;
 327         if (bat_status != cdata->bat_charging)
 328                 mshw0011_notify(cdata, cdata->notify_mask,
 329                                 MSHW0011_NOTIFY_BAT0_BST, &ret);
 330
 331         cdata->bat_charging = bat_status;
 332
 333         ret = mshw0011_bix(cdata, &bix);
 334         if (ret < 0)
 335                 return ret;
 336
 337         if (bix.last_full_charg_capacity != cdata->full_capacity)
 338                 mshw0011_notify(cdata, cdata->notify_mask,
 339                                 MSHW0011_NOTIFY_BAT0_BIX, &ret);
 340
 341         cdata->full_capacity = bix.last_full_charg_capacity;
 342
 343         return 0;
 344 }
 345
 346 static int mshw0011_poll_task(void *data)
 347 {
 348         struct mshw0011_data *cdata = data;
 349         int ret = 0;
 350
 351         cdata->kthread_running = true;
 352
 353         set_freezable();
 354
 355         while (!kthread_should_stop()) {
 356                 schedule_timeout_interruptible(SURFACE_3_POLL_INTERVAL);
 357                 try_to_freeze();
 358                 ret = mshw0011_isr(data);
 359                 if (ret)
 360                         break;
 361         }
 362
 363         cdata->kthread_running = false;
 364         return ret;
 365 }
 366
 367 static acpi_status
 368 mshw0011_space_handler(u32 function, acpi_physical_address command,
 369                         u32 bits, u64 *value64,
 370                         void *handler_context, void *region_context)
 371 {
 372         struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
 373         struct mshw0011_handler_data *data = handler_context;
 374         struct acpi_connection_info *info = &data->info;
 375         struct acpi_resource_i2c_serialbus *sb;
 376         struct i2c_client *client = data->client;
 377         struct mshw0011_data *cdata = i2c_get_clientdata(client);
 378         struct acpi_resource *ares;
 379         u32 accessor_type = function >> 16;
 380         acpi_status ret;
 381         int status = 1;
 382
 383         ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
 384         if (ACPI_FAILURE(ret))
 385                 return ret;
 386
 387         if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
 388                 ret = AE_BAD_PARAMETER;
 389                 goto err;
 390         }
 391
 392         sb = &ares->data.i2c_serial_bus;
 393         if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
 394                 ret = AE_BAD_PARAMETER;
 395                 goto err;
 396         }
 397
 398         if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
 399                 ret = AE_BAD_PARAMETER;
 400                 goto err;
 401         }
 402
 403         if (gsb->cmd.arg0 == MSHW0011_CMD_DEST_ADP1 &&
 404             gsb->cmd.arg1 == MSHW0011_CMD_ADP1_PSR) {
 405                 status = mshw0011_adp_psr(cdata);
 406                 if (status >= 0) {
 407                         ret = AE_OK;
 408                         goto out;
 409                 } else {
 410                         ret = AE_ERROR;
 411                         goto err;
 412                 }
 413         }
 414
 415         if (gsb->cmd.arg0 != MSHW0011_CMD_DEST_BAT0) {
 416                 ret = AE_BAD_PARAMETER;
 417                 goto err;
 418         }
 419
 420         switch (gsb->cmd.arg1) {
 421         case MSHW0011_CMD_BAT0_STA:
 422                 break;
 423         case MSHW0011_CMD_BAT0_BIX:
 424                 ret = mshw0011_bix(cdata, &gsb->bix);
 425                 break;
 426         case MSHW0011_CMD_BAT0_BTP:
 427                 cdata->trip_point = gsb->cmd.arg2;
 428                 break;
 429         case MSHW0011_CMD_BAT0_BST:
 430                 ret = mshw0011_bst(cdata, &gsb->bst);
 431                 break;
 432         default:
 433                 dev_info(&cdata->bat0->dev, "command(0x%02x) is not supported.\n", gsb->cmd.arg1);
 434                 ret = AE_BAD_PARAMETER;
 435                 goto err;
 436         }
 437
 438  out:
 439         gsb->ret = status;
 440         gsb->status = 0;
 441
 442  err:
 443         ACPI_FREE(ares);
 444         return ret;
 445 }
 446
 447 static int mshw0011_install_space_handler(struct i2c_client *client)
 448 {
 449         acpi_handle handle;
 450         struct mshw0011_handler_data *data;
 451         acpi_status status;
 452
 453         handle = ACPI_HANDLE(&client->dev);
 454         if (!handle)
 455                 return -ENODEV;
 456
 457         data = kzalloc(sizeof(struct mshw0011_handler_data),
 458                             GFP_KERNEL);
 459         if (!data)
 460                 return -ENOMEM;
 461
 462         data->client = client;
 463         status = acpi_bus_attach_private_data(handle, (void *)data);
 464         if (ACPI_FAILURE(status)) {
 465                 kfree(data);
 466                 return -ENOMEM;
 467         }
 468
 469         status = acpi_install_address_space_handler(handle,
 470                                 ACPI_ADR_SPACE_GSBUS,
 471                                 &mshw0011_space_handler,
 472                                 NULL,
 473                                 data);
 474         if (ACPI_FAILURE(status)) {
 475                 dev_err(&client->dev, "Error installing i2c space handler\n");
 476                 acpi_bus_detach_private_data(handle);
 477                 kfree(data);
 478                 return -ENOMEM;
 479         }
 480
 481         acpi_walk_dep_device_list(handle);
 482         return 0;
 483 }
 484
 485 static void mshw0011_remove_space_handler(struct i2c_client *client)
 486 {
 487         struct mshw0011_handler_data *data;
 488         acpi_handle handle;
 489         acpi_status status;
 490
 491         handle = ACPI_HANDLE(&client->dev);
 492         if (!handle)
 493                 return;
 494
 495         acpi_remove_address_space_handler(handle,
 496                                 ACPI_ADR_SPACE_GSBUS,
 497                                 &mshw0011_space_handler);
 498
 499         status = acpi_bus_get_private_data(handle, (void **)&data);
 500         if (ACPI_SUCCESS(status))
 501                 kfree(data);
 502
 503         acpi_bus_detach_private_data(handle);
 504 }
 505
 506 static int mshw0011_probe(struct i2c_client *client)
 507 {
 508         struct i2c_board_info board_info;
 509         struct device *dev = &client->dev;
 510         struct i2c_client *bat0;
 511         struct mshw0011_data *data;
 512         int error, mask;
 513
 514         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 515         if (!data)
 516                 return -ENOMEM;
 517
 518         data->adp1 = client;
 519         i2c_set_clientdata(client, data);
 520
 521         memset(&board_info, 0, sizeof(board_info));
 522         strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
 523
 524         bat0 = i2c_acpi_new_device(dev, 1, &board_info);
 525         if (IS_ERR(bat0))
 526                 return PTR_ERR(bat0);
 527
 528         data->bat0 = bat0;
 529         i2c_set_clientdata(bat0, data);
 530
 531         error = mshw0011_notify(data, 1, MSHW0011_NOTIFY_GET_VERSION, &mask);
 532         if (error)
 533                 goto out_err;
 534
 535         data->notify_mask = mask == MSHW0011_EV_2_5_MASK;
 536
 537         data->poll_task = kthread_run(mshw0011_poll_task, data, "mshw0011_adp");
 538         if (IS_ERR(data->poll_task)) {
 539                 error = PTR_ERR(data->poll_task);
 540                 dev_err(&client->dev, "Unable to run kthread err %d\n", error);
 541                 goto out_err;
 542         }
 543
 544         error = mshw0011_install_space_handler(client);
 545         if (error)
 546                 goto out_err;
 547
 548         return 0;
 549
 550 out_err:
 551         if (data->kthread_running)
 552                 kthread_stop(data->poll_task);
 553         i2c_unregister_device(data->bat0);
 554         return error;
 555 }
 556
 557 static int mshw0011_remove(struct i2c_client *client)
 558 {
 559         struct mshw0011_data *cdata = i2c_get_clientdata(client);
 560
 561         mshw0011_remove_space_handler(client);
 562
 563         if (cdata->kthread_running)
 564                 kthread_stop(cdata->poll_task);
 565
 566         i2c_unregister_device(cdata->bat0);
 567
 568         return 0;
 569 }
 570
 571 static const struct acpi_device_id mshw0011_acpi_match[] = {
 572         { "MSHW0011", 0 },
 573         { }
 574 };
 575 MODULE_DEVICE_TABLE(acpi, mshw0011_acpi_match);
 576
 577 static struct i2c_driver mshw0011_driver = {
 578         .probe_new = mshw0011_probe,
 579         .remove = mshw0011_remove,
 580         .driver = {
 581                 .name = "mshw0011",
 582                 .acpi_match_table = mshw0011_acpi_match,
 583         },
 584 };
 585 module_i2c_driver(mshw0011_driver);
 586
 587 MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
 588 MODULE_DESCRIPTION("mshw0011 driver");
 589 MODULE_LICENSE("GPL v2");