drivers/pinctrl/samsung/pinctrl-exynos.h

   1 /*
   2  * Exynos specific definitions for Samsung pinctrl and gpiolib driver.
   3  *
   4  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  * Copyright (c) 2012 Linaro Ltd
   7  *              http://www.linaro.org
   8  *
   9  * This file contains the Exynos specific definitions for the Samsung
  10  * pinctrl/gpiolib interface drivers.
  11  *
  12  * Author: Thomas Abraham <thomas.ab@samsung.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  */
  19
  20 /* External GPIO and wakeup interrupt related definitions */
  21 #define EXYNOS_GPIO_ECON_OFFSET         0x700
  22 #define EXYNOS_GPIO_EFLTCON_OFFSET      0x800
  23 #define EXYNOS_GPIO_EMASK_OFFSET        0x900
  24 #define EXYNOS_GPIO_EPEND_OFFSET        0xA00
  25 #define EXYNOS_WKUP_ECON_OFFSET         0xE00
  26 #define EXYNOS_WKUP_EMASK_OFFSET        0xF00
  27 #define EXYNOS_WKUP_EPEND_OFFSET        0xF40
  28 #define EXYNOS7_WKUP_ECON_OFFSET        0x700
  29 #define EXYNOS7_WKUP_EMASK_OFFSET       0x900
  30 #define EXYNOS7_WKUP_EPEND_OFFSET       0xA00
  31 #define EXYNOS_SVC_OFFSET               0xB08
  32 #define EXYNOS_EINT_FUNC                0xF
  33
  34 /* helpers to access interrupt service register */
  35 #define EXYNOS_SVC_GROUP_SHIFT          3
  36 #define EXYNOS_SVC_GROUP_MASK           0x1f
  37 #define EXYNOS_SVC_NUM_MASK             7
  38 #define EXYNOS_SVC_GROUP(x)             ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
  39                                                 EXYNOS_SVC_GROUP_MASK)
  40
  41 /* Exynos specific external interrupt trigger types */
  42 #define EXYNOS_EINT_LEVEL_LOW           0
  43 #define EXYNOS_EINT_LEVEL_HIGH          1
  44 #define EXYNOS_EINT_EDGE_FALLING        2
  45 #define EXYNOS_EINT_EDGE_RISING         3
  46 #define EXYNOS_EINT_EDGE_BOTH           4
  47 #define EXYNOS_EINT_CON_MASK            0xF
  48 #define EXYNOS_EINT_CON_LEN             4
  49
  50 #define EXYNOS_EINT_MAX_PER_BANK        8
  51 #define EXYNOS_EINT_NR_WKUP_EINT
  52
  53 #define EXYNOS_PIN_BANK_EINTN(pins, reg, id)            \
  54         {                                               \
  55                 .type           = &bank_type_off,       \
  56                 .pctl_offset    = reg,                  \
  57                 .nr_pins        = pins,                 \
  58                 .eint_type      = EINT_TYPE_NONE,       \
  59                 .name           = id                    \
  60         }
  61
  62 #define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs)      \
  63         {                                               \
  64                 .type           = &bank_type_off,       \
  65                 .pctl_offset    = reg,                  \
  66                 .nr_pins        = pins,                 \
  67                 .eint_type      = EINT_TYPE_GPIO,       \
  68                 .eint_offset    = offs,                 \
  69                 .name           = id                    \
  70         }
  71
  72 #define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs)      \
  73         {                                               \
  74                 .type           = &bank_type_alive,     \
  75                 .pctl_offset    = reg,                  \
  76                 .nr_pins        = pins,                 \
  77                 .eint_type      = EINT_TYPE_WKUP,       \
  78                 .eint_offset    = offs,                 \
  79                 .name           = id                    \
  80         }
  81
  82 #define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs)          \
  83         {                                                       \
  84                 .type           = &exynos5433_bank_type_off,    \
  85                 .pctl_offset    = reg,                          \
  86                 .nr_pins        = pins,                         \
  87                 .eint_type      = EINT_TYPE_GPIO,               \
  88                 .eint_offset    = offs,                         \
  89                 .name           = id                            \
  90         }
  91
  92 #define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs)          \
  93         {                                                       \
  94                 .type           = &exynos5433_bank_type_alive,  \
  95                 .pctl_offset    = reg,                          \
  96                 .nr_pins        = pins,                         \
  97                 .eint_type      = EINT_TYPE_WKUP,               \
  98                 .eint_offset    = offs,                         \
  99                 .name           = id                            \
 100         }
 101
 102 #define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
 103         {                                                       \
 104                 .type           = &exynos5433_bank_type_alive,  \
 105                 .pctl_offset    = reg,                          \
 106                 .nr_pins        = pins,                         \
 107                 .eint_type      = EINT_TYPE_WKUP,               \
 108                 .eint_offset    = offs,                         \
 109                 .name           = id,                           \
 110                 .pctl_res_idx   = pctl_idx,                     \
 111         }                                                       \
 112
 113 /**
 114  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
 115  * generated by the external wakeup interrupt controller.
 116  * @irq: interrupt number within the domain.
 117  * @bank: bank responsible for this interrupt
 118  */
 119 struct exynos_weint_data {
 120         unsigned int irq;
 121         struct samsung_pin_bank *bank;
 122 };
 123
 124 /**
 125  * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
 126  * generated by the external wakeup interrupt controller.
 127  * @nr_banks: count of banks being part of the mux
 128  * @banks: array of banks being part of the mux
 129  */
 130 struct exynos_muxed_weint_data {
 131         unsigned int nr_banks;
 132         struct samsung_pin_bank *banks[];
 133 };