PCI: use /sys/bus/pci/drivers/<driver>/new_id first
[sfrench/cifs-2.6.git] / drivers / pci / pci-driver.c
1 /*
2  * drivers/pci/pci-driver.c
3  *
4  */
5
6 #include <linux/pci.h>
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/device.h>
10 #include <linux/mempolicy.h>
11 #include <linux/string.h>
12 #include <linux/slab.h>
13 #include <linux/sched.h>
14 #include "pci.h"
15
16 /*
17  *  Registration of PCI drivers and handling of hot-pluggable devices.
18  */
19
20 /* multithreaded probe logic */
21 static int pci_multithread_probe =
22 #ifdef CONFIG_PCI_MULTITHREAD_PROBE
23         1;
24 #else
25         0;
26 #endif
27 __module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644);
28
29
30 /*
31  * Dynamic device IDs are disabled for !CONFIG_HOTPLUG
32  */
33
34 struct pci_dynid {
35         struct list_head node;
36         struct pci_device_id id;
37 };
38
39 #ifdef CONFIG_HOTPLUG
40
41 /**
42  * store_new_id - add a new PCI device ID to this driver and re-probe devices
43  * @driver: target device driver
44  * @buf: buffer for scanning device ID data
45  * @count: input size
46  *
47  * Adds a new dynamic pci device ID to this driver,
48  * and causes the driver to probe for all devices again.
49  */
50 static ssize_t
51 store_new_id(struct device_driver *driver, const char *buf, size_t count)
52 {
53         struct pci_dynid *dynid;
54         struct pci_driver *pdrv = to_pci_driver(driver);
55         __u32 vendor=PCI_ANY_ID, device=PCI_ANY_ID, subvendor=PCI_ANY_ID,
56                 subdevice=PCI_ANY_ID, class=0, class_mask=0;
57         unsigned long driver_data=0;
58         int fields=0;
59         int retval = 0;
60
61         fields = sscanf(buf, "%x %x %x %x %x %x %lux",
62                         &vendor, &device, &subvendor, &subdevice,
63                         &class, &class_mask, &driver_data);
64         if (fields < 0)
65                 return -EINVAL;
66
67         dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
68         if (!dynid)
69                 return -ENOMEM;
70
71         INIT_LIST_HEAD(&dynid->node);
72         dynid->id.vendor = vendor;
73         dynid->id.device = device;
74         dynid->id.subvendor = subvendor;
75         dynid->id.subdevice = subdevice;
76         dynid->id.class = class;
77         dynid->id.class_mask = class_mask;
78         dynid->id.driver_data = pdrv->dynids.use_driver_data ?
79                 driver_data : 0UL;
80
81         spin_lock(&pdrv->dynids.lock);
82         list_add_tail(&pdrv->dynids.list, &dynid->node);
83         spin_unlock(&pdrv->dynids.lock);
84
85         if (get_driver(&pdrv->driver)) {
86                 retval = driver_attach(&pdrv->driver);
87                 put_driver(&pdrv->driver);
88         }
89
90         if (retval)
91                 return retval;
92         return count;
93 }
94 static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
95
96 static void
97 pci_free_dynids(struct pci_driver *drv)
98 {
99         struct pci_dynid *dynid, *n;
100
101         spin_lock(&drv->dynids.lock);
102         list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
103                 list_del(&dynid->node);
104                 kfree(dynid);
105         }
106         spin_unlock(&drv->dynids.lock);
107 }
108
109 static int
110 pci_create_newid_file(struct pci_driver *drv)
111 {
112         int error = 0;
113         if (drv->probe != NULL)
114                 error = sysfs_create_file(&drv->driver.kobj,
115                                           &driver_attr_new_id.attr);
116         return error;
117 }
118
119 #else /* !CONFIG_HOTPLUG */
120 static inline void pci_free_dynids(struct pci_driver *drv) {}
121 static inline int pci_create_newid_file(struct pci_driver *drv)
122 {
123         return 0;
124 }
125 #endif
126
127 /**
128  * pci_match_id - See if a pci device matches a given pci_id table
129  * @ids: array of PCI device id structures to search in
130  * @dev: the PCI device structure to match against.
131  *
132  * Used by a driver to check whether a PCI device present in the
133  * system is in its list of supported devices.  Returns the matching
134  * pci_device_id structure or %NULL if there is no match.
135  *
136  * Depreciated, don't use this as it will not catch any dynamic ids
137  * that a driver might want to check for.
138  */
139 const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
140                                          struct pci_dev *dev)
141 {
142         if (ids) {
143                 while (ids->vendor || ids->subvendor || ids->class_mask) {
144                         if (pci_match_one_device(ids, dev))
145                                 return ids;
146                         ids++;
147                 }
148         }
149         return NULL;
150 }
151
152 /**
153  * pci_match_device - Tell if a PCI device structure has a matching
154  *                    PCI device id structure
155  * @drv: the PCI driver to match against
156  * @dev: the PCI device structure to match against
157  *
158  * Used by a driver to check whether a PCI device present in the
159  * system is in its list of supported devices.  Returns the matching
160  * pci_device_id structure or %NULL if there is no match.
161  */
162 const struct pci_device_id *pci_match_device(struct pci_driver *drv,
163                                              struct pci_dev *dev)
164 {
165         struct pci_dynid *dynid;
166
167         /* Look at the dynamic ids first, before the static ones */
168         spin_lock(&drv->dynids.lock);
169         list_for_each_entry(dynid, &drv->dynids.list, node) {
170                 if (pci_match_one_device(&dynid->id, dev)) {
171                         spin_unlock(&drv->dynids.lock);
172                         return &dynid->id;
173                 }
174         }
175         spin_unlock(&drv->dynids.lock);
176
177         return pci_match_id(drv->id_table, dev);
178 }
179
180 static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
181                           const struct pci_device_id *id)
182 {
183         int error;
184 #ifdef CONFIG_NUMA
185         /* Execute driver initialization on node where the
186            device's bus is attached to.  This way the driver likely
187            allocates its local memory on the right node without
188            any need to change it. */
189         struct mempolicy *oldpol;
190         cpumask_t oldmask = current->cpus_allowed;
191         int node = pcibus_to_node(dev->bus);
192         if (node >= 0 && node_online(node))
193             set_cpus_allowed(current, node_to_cpumask(node));
194         /* And set default memory allocation policy */
195         oldpol = current->mempolicy;
196         current->mempolicy = &default_policy;
197         mpol_get(current->mempolicy);
198 #endif
199         error = drv->probe(dev, id);
200 #ifdef CONFIG_NUMA
201         set_cpus_allowed(current, oldmask);
202         mpol_free(current->mempolicy);
203         current->mempolicy = oldpol;
204 #endif
205         return error;
206 }
207
208 /**
209  * __pci_device_probe()
210  * @drv: driver to call to check if it wants the PCI device
211  * @pci_dev: PCI device being probed
212  * 
213  * returns 0 on success, else error.
214  * side-effect: pci_dev->driver is set to drv when drv claims pci_dev.
215  */
216 static int
217 __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev)
218 {
219         const struct pci_device_id *id;
220         int error = 0;
221
222         if (!pci_dev->driver && drv->probe) {
223                 error = -ENODEV;
224
225                 id = pci_match_device(drv, pci_dev);
226                 if (id)
227                         error = pci_call_probe(drv, pci_dev, id);
228                 if (error >= 0) {
229                         pci_dev->driver = drv;
230                         error = 0;
231                 }
232         }
233         return error;
234 }
235
236 static int pci_device_probe(struct device * dev)
237 {
238         int error = 0;
239         struct pci_driver *drv;
240         struct pci_dev *pci_dev;
241
242         drv = to_pci_driver(dev->driver);
243         pci_dev = to_pci_dev(dev);
244         pci_dev_get(pci_dev);
245         error = __pci_device_probe(drv, pci_dev);
246         if (error)
247                 pci_dev_put(pci_dev);
248
249         return error;
250 }
251
252 static int pci_device_remove(struct device * dev)
253 {
254         struct pci_dev * pci_dev = to_pci_dev(dev);
255         struct pci_driver * drv = pci_dev->driver;
256
257         if (drv) {
258                 if (drv->remove)
259                         drv->remove(pci_dev);
260                 pci_dev->driver = NULL;
261         }
262
263         /*
264          * If the device is still on, set the power state as "unknown",
265          * since it might change by the next time we load the driver.
266          */
267         if (pci_dev->current_state == PCI_D0)
268                 pci_dev->current_state = PCI_UNKNOWN;
269
270         /*
271          * We would love to complain here if pci_dev->is_enabled is set, that
272          * the driver should have called pci_disable_device(), but the
273          * unfortunate fact is there are too many odd BIOS and bridge setups
274          * that don't like drivers doing that all of the time.  
275          * Oh well, we can dream of sane hardware when we sleep, no matter how
276          * horrible the crap we have to deal with is when we are awake...
277          */
278
279         pci_dev_put(pci_dev);
280         return 0;
281 }
282
283 static int pci_device_suspend(struct device * dev, pm_message_t state)
284 {
285         struct pci_dev * pci_dev = to_pci_dev(dev);
286         struct pci_driver * drv = pci_dev->driver;
287         int i = 0;
288
289         if (drv && drv->suspend) {
290                 i = drv->suspend(pci_dev, state);
291                 suspend_report_result(drv->suspend, i);
292         } else {
293                 pci_save_state(pci_dev);
294                 /*
295                  * mark its power state as "unknown", since we don't know if
296                  * e.g. the BIOS will change its device state when we suspend.
297                  */
298                 if (pci_dev->current_state == PCI_D0)
299                         pci_dev->current_state = PCI_UNKNOWN;
300         }
301         return i;
302 }
303
304 static int pci_device_suspend_late(struct device * dev, pm_message_t state)
305 {
306         struct pci_dev * pci_dev = to_pci_dev(dev);
307         struct pci_driver * drv = pci_dev->driver;
308         int i = 0;
309
310         if (drv && drv->suspend_late) {
311                 i = drv->suspend_late(pci_dev, state);
312                 suspend_report_result(drv->suspend_late, i);
313         }
314         return i;
315 }
316
317 /*
318  * Default resume method for devices that have no driver provided resume,
319  * or not even a driver at all.
320  */
321 static int pci_default_resume(struct pci_dev *pci_dev)
322 {
323         int retval = 0;
324
325         /* restore the PCI config space */
326         pci_restore_state(pci_dev);
327         /* if the device was enabled before suspend, reenable */
328         if (atomic_read(&pci_dev->enable_cnt))
329                 retval = __pci_enable_device(pci_dev);
330         /* if the device was busmaster before the suspend, make it busmaster again */
331         if (pci_dev->is_busmaster)
332                 pci_set_master(pci_dev);
333
334         return retval;
335 }
336
337 static int pci_device_resume(struct device * dev)
338 {
339         int error;
340         struct pci_dev * pci_dev = to_pci_dev(dev);
341         struct pci_driver * drv = pci_dev->driver;
342
343         if (drv && drv->resume)
344                 error = drv->resume(pci_dev);
345         else
346                 error = pci_default_resume(pci_dev);
347         return error;
348 }
349
350 static int pci_device_resume_early(struct device * dev)
351 {
352         int error = 0;
353         struct pci_dev * pci_dev = to_pci_dev(dev);
354         struct pci_driver * drv = pci_dev->driver;
355
356         if (drv && drv->resume_early)
357                 error = drv->resume_early(pci_dev);
358         return error;
359 }
360
361 static void pci_device_shutdown(struct device *dev)
362 {
363         struct pci_dev *pci_dev = to_pci_dev(dev);
364         struct pci_driver *drv = pci_dev->driver;
365
366         if (drv && drv->shutdown)
367                 drv->shutdown(pci_dev);
368 }
369
370 #define kobj_to_pci_driver(obj) container_of(obj, struct device_driver, kobj)
371 #define attr_to_driver_attribute(obj) container_of(obj, struct driver_attribute, attr)
372
373 static ssize_t
374 pci_driver_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
375 {
376         struct device_driver *driver = kobj_to_pci_driver(kobj);
377         struct driver_attribute *dattr = attr_to_driver_attribute(attr);
378         ssize_t ret;
379
380         if (!get_driver(driver))
381                 return -ENODEV;
382
383         ret = dattr->show ? dattr->show(driver, buf) : -EIO;
384
385         put_driver(driver);
386         return ret;
387 }
388
389 static ssize_t
390 pci_driver_attr_store(struct kobject * kobj, struct attribute *attr,
391                       const char *buf, size_t count)
392 {
393         struct device_driver *driver = kobj_to_pci_driver(kobj);
394         struct driver_attribute *dattr = attr_to_driver_attribute(attr);
395         ssize_t ret;
396
397         if (!get_driver(driver))
398                 return -ENODEV;
399
400         ret = dattr->store ? dattr->store(driver, buf, count) : -EIO;
401
402         put_driver(driver);
403         return ret;
404 }
405
406 static struct sysfs_ops pci_driver_sysfs_ops = {
407         .show = pci_driver_attr_show,
408         .store = pci_driver_attr_store,
409 };
410 static struct kobj_type pci_driver_kobj_type = {
411         .sysfs_ops = &pci_driver_sysfs_ops,
412 };
413
414 /**
415  * __pci_register_driver - register a new pci driver
416  * @drv: the driver structure to register
417  * @owner: owner module of drv
418  * 
419  * Adds the driver structure to the list of registered drivers.
420  * Returns a negative value on error, otherwise 0. 
421  * If no error occurred, the driver remains registered even if 
422  * no device was claimed during registration.
423  */
424 int __pci_register_driver(struct pci_driver *drv, struct module *owner)
425 {
426         int error;
427
428         /* initialize common driver fields */
429         drv->driver.name = drv->name;
430         drv->driver.bus = &pci_bus_type;
431         drv->driver.owner = owner;
432         drv->driver.kobj.ktype = &pci_driver_kobj_type;
433
434         if (pci_multithread_probe)
435                 drv->driver.multithread_probe = pci_multithread_probe;
436         else
437                 drv->driver.multithread_probe = drv->multithread_probe;
438
439         spin_lock_init(&drv->dynids.lock);
440         INIT_LIST_HEAD(&drv->dynids.list);
441
442         /* register with core */
443         error = driver_register(&drv->driver);
444         if (error)
445                 return error;
446
447         error = pci_create_newid_file(drv);
448         if (error)
449                 driver_unregister(&drv->driver);
450
451         return error;
452 }
453
454 /**
455  * pci_unregister_driver - unregister a pci driver
456  * @drv: the driver structure to unregister
457  * 
458  * Deletes the driver structure from the list of registered PCI drivers,
459  * gives it a chance to clean up by calling its remove() function for
460  * each device it was responsible for, and marks those devices as
461  * driverless.
462  */
463
464 void
465 pci_unregister_driver(struct pci_driver *drv)
466 {
467         driver_unregister(&drv->driver);
468         pci_free_dynids(drv);
469 }
470
471 static struct pci_driver pci_compat_driver = {
472         .name = "compat"
473 };
474
475 /**
476  * pci_dev_driver - get the pci_driver of a device
477  * @dev: the device to query
478  *
479  * Returns the appropriate pci_driver structure or %NULL if there is no 
480  * registered driver for the device.
481  */
482 struct pci_driver *
483 pci_dev_driver(const struct pci_dev *dev)
484 {
485         if (dev->driver)
486                 return dev->driver;
487         else {
488                 int i;
489                 for(i=0; i<=PCI_ROM_RESOURCE; i++)
490                         if (dev->resource[i].flags & IORESOURCE_BUSY)
491                                 return &pci_compat_driver;
492         }
493         return NULL;
494 }
495
496 /**
497  * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
498  * @dev: the PCI device structure to match against
499  * @drv: the device driver to search for matching PCI device id structures
500  * 
501  * Used by a driver to check whether a PCI device present in the
502  * system is in its list of supported devices. Returns the matching
503  * pci_device_id structure or %NULL if there is no match.
504  */
505 static int pci_bus_match(struct device *dev, struct device_driver *drv)
506 {
507         struct pci_dev *pci_dev = to_pci_dev(dev);
508         struct pci_driver *pci_drv = to_pci_driver(drv);
509         const struct pci_device_id *found_id;
510
511         found_id = pci_match_device(pci_drv, pci_dev);
512         if (found_id)
513                 return 1;
514
515         return 0;
516 }
517
518 /**
519  * pci_dev_get - increments the reference count of the pci device structure
520  * @dev: the device being referenced
521  *
522  * Each live reference to a device should be refcounted.
523  *
524  * Drivers for PCI devices should normally record such references in
525  * their probe() methods, when they bind to a device, and release
526  * them by calling pci_dev_put(), in their disconnect() methods.
527  *
528  * A pointer to the device with the incremented reference counter is returned.
529  */
530 struct pci_dev *pci_dev_get(struct pci_dev *dev)
531 {
532         if (dev)
533                 get_device(&dev->dev);
534         return dev;
535 }
536
537 /**
538  * pci_dev_put - release a use of the pci device structure
539  * @dev: device that's been disconnected
540  *
541  * Must be called when a user of a device is finished with it.  When the last
542  * user of the device calls this function, the memory of the device is freed.
543  */
544 void pci_dev_put(struct pci_dev *dev)
545 {
546         if (dev)
547                 put_device(&dev->dev);
548 }
549
550 #ifndef CONFIG_HOTPLUG
551 int pci_uevent(struct device *dev, char **envp, int num_envp,
552                char *buffer, int buffer_size)
553 {
554         return -ENODEV;
555 }
556 #endif
557
558 struct bus_type pci_bus_type = {
559         .name           = "pci",
560         .match          = pci_bus_match,
561         .uevent         = pci_uevent,
562         .probe          = pci_device_probe,
563         .remove         = pci_device_remove,
564         .suspend        = pci_device_suspend,
565         .suspend_late   = pci_device_suspend_late,
566         .resume_early   = pci_device_resume_early,
567         .resume         = pci_device_resume,
568         .shutdown       = pci_device_shutdown,
569         .dev_attrs      = pci_dev_attrs,
570 };
571
572 static int __init pci_driver_init(void)
573 {
574         return bus_register(&pci_bus_type);
575 }
576
577 postcore_initcall(pci_driver_init);
578
579 EXPORT_SYMBOL(pci_match_id);
580 EXPORT_SYMBOL(pci_match_device);
581 EXPORT_SYMBOL(__pci_register_driver);
582 EXPORT_SYMBOL(pci_unregister_driver);
583 EXPORT_SYMBOL(pci_dev_driver);
584 EXPORT_SYMBOL(pci_bus_type);
585 EXPORT_SYMBOL(pci_dev_get);
586 EXPORT_SYMBOL(pci_dev_put);