Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
[sfrench/cifs-2.6.git] / drivers / pci / controller / pci-mvebu.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PCIe driver for Marvell Armada 370 and Armada XP SoCs
4  *
5  * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
6  */
7
8 #include <linux/kernel.h>
9 #include <linux/pci.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/gpio.h>
13 #include <linux/init.h>
14 #include <linux/mbus.h>
15 #include <linux/msi.h>
16 #include <linux/slab.h>
17 #include <linux/platform_device.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 #include <linux/of_gpio.h>
21 #include <linux/of_pci.h>
22 #include <linux/of_platform.h>
23
24 #include "../pci.h"
25 #include "../pci-bridge-emul.h"
26
27 /*
28  * PCIe unit register offsets.
29  */
30 #define PCIE_DEV_ID_OFF         0x0000
31 #define PCIE_CMD_OFF            0x0004
32 #define PCIE_DEV_REV_OFF        0x0008
33 #define PCIE_BAR_LO_OFF(n)      (0x0010 + ((n) << 3))
34 #define PCIE_BAR_HI_OFF(n)      (0x0014 + ((n) << 3))
35 #define PCIE_CAP_PCIEXP         0x0060
36 #define PCIE_HEADER_LOG_4_OFF   0x0128
37 #define PCIE_BAR_CTRL_OFF(n)    (0x1804 + (((n) - 1) * 4))
38 #define PCIE_WIN04_CTRL_OFF(n)  (0x1820 + ((n) << 4))
39 #define PCIE_WIN04_BASE_OFF(n)  (0x1824 + ((n) << 4))
40 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
41 #define PCIE_WIN5_CTRL_OFF      0x1880
42 #define PCIE_WIN5_BASE_OFF      0x1884
43 #define PCIE_WIN5_REMAP_OFF     0x188c
44 #define PCIE_CONF_ADDR_OFF      0x18f8
45 #define  PCIE_CONF_ADDR_EN              0x80000000
46 #define  PCIE_CONF_REG(r)               ((((r) & 0xf00) << 16) | ((r) & 0xfc))
47 #define  PCIE_CONF_BUS(b)               (((b) & 0xff) << 16)
48 #define  PCIE_CONF_DEV(d)               (((d) & 0x1f) << 11)
49 #define  PCIE_CONF_FUNC(f)              (((f) & 0x7) << 8)
50 #define  PCIE_CONF_ADDR(bus, devfn, where) \
51         (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn))    | \
52          PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
53          PCIE_CONF_ADDR_EN)
54 #define PCIE_CONF_DATA_OFF      0x18fc
55 #define PCIE_MASK_OFF           0x1910
56 #define  PCIE_MASK_ENABLE_INTS          0x0f000000
57 #define PCIE_CTRL_OFF           0x1a00
58 #define  PCIE_CTRL_X1_MODE              0x0001
59 #define PCIE_STAT_OFF           0x1a04
60 #define  PCIE_STAT_BUS                  0xff00
61 #define  PCIE_STAT_DEV                  0x1f0000
62 #define  PCIE_STAT_LINK_DOWN            BIT(0)
63 #define PCIE_RC_RTSTA           0x1a14
64 #define PCIE_DEBUG_CTRL         0x1a60
65 #define  PCIE_DEBUG_SOFT_RESET          BIT(20)
66
67 struct mvebu_pcie_port;
68
69 /* Structure representing all PCIe interfaces */
70 struct mvebu_pcie {
71         struct platform_device *pdev;
72         struct mvebu_pcie_port *ports;
73         struct msi_controller *msi;
74         struct list_head resources;
75         struct resource io;
76         struct resource realio;
77         struct resource mem;
78         struct resource busn;
79         int nports;
80 };
81
82 struct mvebu_pcie_window {
83         phys_addr_t base;
84         phys_addr_t remap;
85         size_t size;
86 };
87
88 /* Structure representing one PCIe interface */
89 struct mvebu_pcie_port {
90         char *name;
91         void __iomem *base;
92         u32 port;
93         u32 lane;
94         int devfn;
95         unsigned int mem_target;
96         unsigned int mem_attr;
97         unsigned int io_target;
98         unsigned int io_attr;
99         struct clk *clk;
100         struct gpio_desc *reset_gpio;
101         char *reset_name;
102         struct pci_bridge_emul bridge;
103         struct device_node *dn;
104         struct mvebu_pcie *pcie;
105         struct mvebu_pcie_window memwin;
106         struct mvebu_pcie_window iowin;
107         u32 saved_pcie_stat;
108 };
109
110 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
111 {
112         writel(val, port->base + reg);
113 }
114
115 static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
116 {
117         return readl(port->base + reg);
118 }
119
120 static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
121 {
122         return port->io_target != -1 && port->io_attr != -1;
123 }
124
125 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
126 {
127         return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
128 }
129
130 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
131 {
132         u32 stat;
133
134         stat = mvebu_readl(port, PCIE_STAT_OFF);
135         stat &= ~PCIE_STAT_BUS;
136         stat |= nr << 8;
137         mvebu_writel(port, stat, PCIE_STAT_OFF);
138 }
139
140 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
141 {
142         u32 stat;
143
144         stat = mvebu_readl(port, PCIE_STAT_OFF);
145         stat &= ~PCIE_STAT_DEV;
146         stat |= nr << 16;
147         mvebu_writel(port, stat, PCIE_STAT_OFF);
148 }
149
150 /*
151  * Setup PCIE BARs and Address Decode Wins:
152  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
153  * WIN[0-3] -> DRAM bank[0-3]
154  */
155 static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
156 {
157         const struct mbus_dram_target_info *dram;
158         u32 size;
159         int i;
160
161         dram = mv_mbus_dram_info();
162
163         /* First, disable and clear BARs and windows. */
164         for (i = 1; i < 3; i++) {
165                 mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
166                 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
167                 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
168         }
169
170         for (i = 0; i < 5; i++) {
171                 mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
172                 mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
173                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
174         }
175
176         mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
177         mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
178         mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
179
180         /* Setup windows for DDR banks.  Count total DDR size on the fly. */
181         size = 0;
182         for (i = 0; i < dram->num_cs; i++) {
183                 const struct mbus_dram_window *cs = dram->cs + i;
184
185                 mvebu_writel(port, cs->base & 0xffff0000,
186                              PCIE_WIN04_BASE_OFF(i));
187                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
188                 mvebu_writel(port,
189                              ((cs->size - 1) & 0xffff0000) |
190                              (cs->mbus_attr << 8) |
191                              (dram->mbus_dram_target_id << 4) | 1,
192                              PCIE_WIN04_CTRL_OFF(i));
193
194                 size += cs->size;
195         }
196
197         /* Round up 'size' to the nearest power of two. */
198         if ((size & (size - 1)) != 0)
199                 size = 1 << fls(size);
200
201         /* Setup BAR[1] to all DRAM banks. */
202         mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
203         mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
204         mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
205                      PCIE_BAR_CTRL_OFF(1));
206 }
207
208 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
209 {
210         u32 cmd, mask;
211
212         /* Point PCIe unit MBUS decode windows to DRAM space. */
213         mvebu_pcie_setup_wins(port);
214
215         /* Master + slave enable. */
216         cmd = mvebu_readl(port, PCIE_CMD_OFF);
217         cmd |= PCI_COMMAND_IO;
218         cmd |= PCI_COMMAND_MEMORY;
219         cmd |= PCI_COMMAND_MASTER;
220         mvebu_writel(port, cmd, PCIE_CMD_OFF);
221
222         /* Enable interrupt lines A-D. */
223         mask = mvebu_readl(port, PCIE_MASK_OFF);
224         mask |= PCIE_MASK_ENABLE_INTS;
225         mvebu_writel(port, mask, PCIE_MASK_OFF);
226 }
227
228 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
229                                  struct pci_bus *bus,
230                                  u32 devfn, int where, int size, u32 *val)
231 {
232         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
233
234         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
235                      PCIE_CONF_ADDR_OFF);
236
237         switch (size) {
238         case 1:
239                 *val = readb_relaxed(conf_data + (where & 3));
240                 break;
241         case 2:
242                 *val = readw_relaxed(conf_data + (where & 2));
243                 break;
244         case 4:
245                 *val = readl_relaxed(conf_data);
246                 break;
247         }
248
249         return PCIBIOS_SUCCESSFUL;
250 }
251
252 static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
253                                  struct pci_bus *bus,
254                                  u32 devfn, int where, int size, u32 val)
255 {
256         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
257
258         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
259                      PCIE_CONF_ADDR_OFF);
260
261         switch (size) {
262         case 1:
263                 writeb(val, conf_data + (where & 3));
264                 break;
265         case 2:
266                 writew(val, conf_data + (where & 2));
267                 break;
268         case 4:
269                 writel(val, conf_data);
270                 break;
271         default:
272                 return PCIBIOS_BAD_REGISTER_NUMBER;
273         }
274
275         return PCIBIOS_SUCCESSFUL;
276 }
277
278 /*
279  * Remove windows, starting from the largest ones to the smallest
280  * ones.
281  */
282 static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
283                                    phys_addr_t base, size_t size)
284 {
285         while (size) {
286                 size_t sz = 1 << (fls(size) - 1);
287
288                 mvebu_mbus_del_window(base, sz);
289                 base += sz;
290                 size -= sz;
291         }
292 }
293
294 /*
295  * MBus windows can only have a power of two size, but PCI BARs do not
296  * have this constraint. Therefore, we have to split the PCI BAR into
297  * areas each having a power of two size. We start from the largest
298  * one (i.e highest order bit set in the size).
299  */
300 static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
301                                    unsigned int target, unsigned int attribute,
302                                    phys_addr_t base, size_t size,
303                                    phys_addr_t remap)
304 {
305         size_t size_mapped = 0;
306
307         while (size) {
308                 size_t sz = 1 << (fls(size) - 1);
309                 int ret;
310
311                 ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
312                                                         sz, remap);
313                 if (ret) {
314                         phys_addr_t end = base + sz - 1;
315
316                         dev_err(&port->pcie->pdev->dev,
317                                 "Could not create MBus window at [mem %pa-%pa]: %d\n",
318                                 &base, &end, ret);
319                         mvebu_pcie_del_windows(port, base - size_mapped,
320                                                size_mapped);
321                         return;
322                 }
323
324                 size -= sz;
325                 size_mapped += sz;
326                 base += sz;
327                 if (remap != MVEBU_MBUS_NO_REMAP)
328                         remap += sz;
329         }
330 }
331
332 static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
333                                   unsigned int target, unsigned int attribute,
334                                   const struct mvebu_pcie_window *desired,
335                                   struct mvebu_pcie_window *cur)
336 {
337         if (desired->base == cur->base && desired->remap == cur->remap &&
338             desired->size == cur->size)
339                 return;
340
341         if (cur->size != 0) {
342                 mvebu_pcie_del_windows(port, cur->base, cur->size);
343                 cur->size = 0;
344                 cur->base = 0;
345
346                 /*
347                  * If something tries to change the window while it is enabled
348                  * the change will not be done atomically. That would be
349                  * difficult to do in the general case.
350                  */
351         }
352
353         if (desired->size == 0)
354                 return;
355
356         mvebu_pcie_add_windows(port, target, attribute, desired->base,
357                                desired->size, desired->remap);
358         *cur = *desired;
359 }
360
361 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
362 {
363         struct mvebu_pcie_window desired = {};
364         struct pci_bridge_emul_conf *conf = &port->bridge.conf;
365
366         /* Are the new iobase/iolimit values invalid? */
367         if (conf->iolimit < conf->iobase ||
368             conf->iolimitupper < conf->iobaseupper ||
369             !(conf->command & PCI_COMMAND_IO)) {
370                 mvebu_pcie_set_window(port, port->io_target, port->io_attr,
371                                       &desired, &port->iowin);
372                 return;
373         }
374
375         if (!mvebu_has_ioport(port)) {
376                 dev_WARN(&port->pcie->pdev->dev,
377                          "Attempt to set IO when IO is disabled\n");
378                 return;
379         }
380
381         /*
382          * We read the PCI-to-PCI bridge emulated registers, and
383          * calculate the base address and size of the address decoding
384          * window to setup, according to the PCI-to-PCI bridge
385          * specifications. iobase is the bus address, port->iowin_base
386          * is the CPU address.
387          */
388         desired.remap = ((conf->iobase & 0xF0) << 8) |
389                         (conf->iobaseupper << 16);
390         desired.base = port->pcie->io.start + desired.remap;
391         desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
392                          (conf->iolimitupper << 16)) -
393                         desired.remap) +
394                        1;
395
396         mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
397                               &port->iowin);
398 }
399
400 static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
401 {
402         struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
403         struct pci_bridge_emul_conf *conf = &port->bridge.conf;
404
405         /* Are the new membase/memlimit values invalid? */
406         if (conf->memlimit < conf->membase ||
407             !(conf->command & PCI_COMMAND_MEMORY)) {
408                 mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
409                                       &desired, &port->memwin);
410                 return;
411         }
412
413         /*
414          * We read the PCI-to-PCI bridge emulated registers, and
415          * calculate the base address and size of the address decoding
416          * window to setup, according to the PCI-to-PCI bridge
417          * specifications.
418          */
419         desired.base = ((conf->membase & 0xFFF0) << 16);
420         desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
421                        desired.base + 1;
422
423         mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
424                               &port->memwin);
425 }
426
427 static pci_bridge_emul_read_status_t
428 mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
429                                      int reg, u32 *value)
430 {
431         struct mvebu_pcie_port *port = bridge->data;
432
433         switch (reg) {
434         case PCI_EXP_DEVCAP:
435                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
436                 break;
437
438         case PCI_EXP_DEVCTL:
439                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
440                                  ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
441                                    PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
442                 break;
443
444         case PCI_EXP_LNKCAP:
445                 /*
446                  * PCIe requires the clock power management capability to be
447                  * hard-wired to zero for downstream ports
448                  */
449                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
450                          ~PCI_EXP_LNKCAP_CLKPM;
451                 break;
452
453         case PCI_EXP_LNKCTL:
454                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
455                 break;
456
457         case PCI_EXP_SLTCTL:
458                 *value = PCI_EXP_SLTSTA_PDS << 16;
459                 break;
460
461         case PCI_EXP_RTSTA:
462                 *value = mvebu_readl(port, PCIE_RC_RTSTA);
463                 break;
464
465         default:
466                 return PCI_BRIDGE_EMUL_NOT_HANDLED;
467         }
468
469         return PCI_BRIDGE_EMUL_HANDLED;
470 }
471
472 static void
473 mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
474                                       int reg, u32 old, u32 new, u32 mask)
475 {
476         struct mvebu_pcie_port *port = bridge->data;
477         struct pci_bridge_emul_conf *conf = &bridge->conf;
478
479         switch (reg) {
480         case PCI_COMMAND:
481         {
482                 if (!mvebu_has_ioport(port))
483                         conf->command &= ~PCI_COMMAND_IO;
484
485                 if ((old ^ new) & PCI_COMMAND_IO)
486                         mvebu_pcie_handle_iobase_change(port);
487                 if ((old ^ new) & PCI_COMMAND_MEMORY)
488                         mvebu_pcie_handle_membase_change(port);
489
490                 break;
491         }
492
493         case PCI_IO_BASE:
494                 /*
495                  * We keep bit 1 set, it is a read-only bit that
496                  * indicates we support 32 bits addressing for the
497                  * I/O
498                  */
499                 conf->iobase |= PCI_IO_RANGE_TYPE_32;
500                 conf->iolimit |= PCI_IO_RANGE_TYPE_32;
501                 mvebu_pcie_handle_iobase_change(port);
502                 break;
503
504         case PCI_MEMORY_BASE:
505                 mvebu_pcie_handle_membase_change(port);
506                 break;
507
508         case PCI_IO_BASE_UPPER16:
509                 mvebu_pcie_handle_iobase_change(port);
510                 break;
511
512         case PCI_PRIMARY_BUS:
513                 mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
514                 break;
515
516         default:
517                 break;
518         }
519 }
520
521 static void
522 mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
523                                       int reg, u32 old, u32 new, u32 mask)
524 {
525         struct mvebu_pcie_port *port = bridge->data;
526
527         switch (reg) {
528         case PCI_EXP_DEVCTL:
529                 /*
530                  * Armada370 data says these bits must always
531                  * be zero when in root complex mode.
532                  */
533                 new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
534                          PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
535
536                 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
537                 break;
538
539         case PCI_EXP_LNKCTL:
540                 /*
541                  * If we don't support CLKREQ, we must ensure that the
542                  * CLKREQ enable bit always reads zero.  Since we haven't
543                  * had this capability, and it's dependent on board wiring,
544                  * disable it for the time being.
545                  */
546                 new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
547
548                 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
549                 break;
550
551         case PCI_EXP_RTSTA:
552                 mvebu_writel(port, new, PCIE_RC_RTSTA);
553                 break;
554         }
555 }
556
557 struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
558         .write_base = mvebu_pci_bridge_emul_base_conf_write,
559         .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
560         .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
561 };
562
563 /*
564  * Initialize the configuration space of the PCI-to-PCI bridge
565  * associated with the given PCIe interface.
566  */
567 static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
568 {
569         struct pci_bridge_emul *bridge = &port->bridge;
570
571         bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
572         bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
573         bridge->conf.class_revision =
574                 mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
575
576         if (mvebu_has_ioport(port)) {
577                 /* We support 32 bits I/O addressing */
578                 bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
579                 bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
580         }
581
582         bridge->has_pcie = true;
583         bridge->data = port;
584         bridge->ops = &mvebu_pci_bridge_emul_ops;
585
586         pci_bridge_emul_init(bridge);
587 }
588
589 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
590 {
591         return sys->private_data;
592 }
593
594 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
595                                                     struct pci_bus *bus,
596                                                     int devfn)
597 {
598         int i;
599
600         for (i = 0; i < pcie->nports; i++) {
601                 struct mvebu_pcie_port *port = &pcie->ports[i];
602
603                 if (bus->number == 0 && port->devfn == devfn)
604                         return port;
605                 if (bus->number != 0 &&
606                     bus->number >= port->bridge.conf.secondary_bus &&
607                     bus->number <= port->bridge.conf.subordinate_bus)
608                         return port;
609         }
610
611         return NULL;
612 }
613
614 /* PCI configuration space write function */
615 static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
616                               int where, int size, u32 val)
617 {
618         struct mvebu_pcie *pcie = bus->sysdata;
619         struct mvebu_pcie_port *port;
620         int ret;
621
622         port = mvebu_pcie_find_port(pcie, bus, devfn);
623         if (!port)
624                 return PCIBIOS_DEVICE_NOT_FOUND;
625
626         /* Access the emulated PCI-to-PCI bridge */
627         if (bus->number == 0)
628                 return pci_bridge_emul_conf_write(&port->bridge, where,
629                                                   size, val);
630
631         if (!mvebu_pcie_link_up(port))
632                 return PCIBIOS_DEVICE_NOT_FOUND;
633
634         /* Access the real PCIe interface */
635         ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
636                                     where, size, val);
637
638         return ret;
639 }
640
641 /* PCI configuration space read function */
642 static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
643                               int size, u32 *val)
644 {
645         struct mvebu_pcie *pcie = bus->sysdata;
646         struct mvebu_pcie_port *port;
647         int ret;
648
649         port = mvebu_pcie_find_port(pcie, bus, devfn);
650         if (!port) {
651                 *val = 0xffffffff;
652                 return PCIBIOS_DEVICE_NOT_FOUND;
653         }
654
655         /* Access the emulated PCI-to-PCI bridge */
656         if (bus->number == 0)
657                 return pci_bridge_emul_conf_read(&port->bridge, where,
658                                                  size, val);
659
660         if (!mvebu_pcie_link_up(port)) {
661                 *val = 0xffffffff;
662                 return PCIBIOS_DEVICE_NOT_FOUND;
663         }
664
665         /* Access the real PCIe interface */
666         ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
667                                     where, size, val);
668
669         return ret;
670 }
671
672 static struct pci_ops mvebu_pcie_ops = {
673         .read = mvebu_pcie_rd_conf,
674         .write = mvebu_pcie_wr_conf,
675 };
676
677 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
678                                                  const struct resource *res,
679                                                  resource_size_t start,
680                                                  resource_size_t size,
681                                                  resource_size_t align)
682 {
683         if (dev->bus->number != 0)
684                 return start;
685
686         /*
687          * On the PCI-to-PCI bridge side, the I/O windows must have at
688          * least a 64 KB size and the memory windows must have at
689          * least a 1 MB size. Moreover, MBus windows need to have a
690          * base address aligned on their size, and their size must be
691          * a power of two. This means that if the BAR doesn't have a
692          * power of two size, several MBus windows will actually be
693          * created. We need to ensure that the biggest MBus window
694          * (which will be the first one) is aligned on its size, which
695          * explains the rounddown_pow_of_two() being done here.
696          */
697         if (res->flags & IORESOURCE_IO)
698                 return round_up(start, max_t(resource_size_t, SZ_64K,
699                                              rounddown_pow_of_two(size)));
700         else if (res->flags & IORESOURCE_MEM)
701                 return round_up(start, max_t(resource_size_t, SZ_1M,
702                                              rounddown_pow_of_two(size)));
703         else
704                 return start;
705 }
706
707 static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
708                                               struct device_node *np,
709                                               struct mvebu_pcie_port *port)
710 {
711         struct resource regs;
712         int ret = 0;
713
714         ret = of_address_to_resource(np, 0, &regs);
715         if (ret)
716                 return ERR_PTR(ret);
717
718         return devm_ioremap_resource(&pdev->dev, &regs);
719 }
720
721 #define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
722 #define    DT_TYPE_IO                 0x1
723 #define    DT_TYPE_MEM32              0x2
724 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
725 #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
726
727 static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
728                               unsigned long type,
729                               unsigned int *tgt,
730                               unsigned int *attr)
731 {
732         const int na = 3, ns = 2;
733         const __be32 *range;
734         int rlen, nranges, rangesz, pna, i;
735
736         *tgt = -1;
737         *attr = -1;
738
739         range = of_get_property(np, "ranges", &rlen);
740         if (!range)
741                 return -EINVAL;
742
743         pna = of_n_addr_cells(np);
744         rangesz = pna + na + ns;
745         nranges = rlen / sizeof(__be32) / rangesz;
746
747         for (i = 0; i < nranges; i++, range += rangesz) {
748                 u32 flags = of_read_number(range, 1);
749                 u32 slot = of_read_number(range + 1, 1);
750                 u64 cpuaddr = of_read_number(range + na, pna);
751                 unsigned long rtype;
752
753                 if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
754                         rtype = IORESOURCE_IO;
755                 else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
756                         rtype = IORESOURCE_MEM;
757                 else
758                         continue;
759
760                 if (slot == PCI_SLOT(devfn) && type == rtype) {
761                         *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
762                         *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
763                         return 0;
764                 }
765         }
766
767         return -ENOENT;
768 }
769
770 #ifdef CONFIG_PM_SLEEP
771 static int mvebu_pcie_suspend(struct device *dev)
772 {
773         struct mvebu_pcie *pcie;
774         int i;
775
776         pcie = dev_get_drvdata(dev);
777         for (i = 0; i < pcie->nports; i++) {
778                 struct mvebu_pcie_port *port = pcie->ports + i;
779                 port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
780         }
781
782         return 0;
783 }
784
785 static int mvebu_pcie_resume(struct device *dev)
786 {
787         struct mvebu_pcie *pcie;
788         int i;
789
790         pcie = dev_get_drvdata(dev);
791         for (i = 0; i < pcie->nports; i++) {
792                 struct mvebu_pcie_port *port = pcie->ports + i;
793                 mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
794                 mvebu_pcie_setup_hw(port);
795         }
796
797         return 0;
798 }
799 #endif
800
801 static void mvebu_pcie_port_clk_put(void *data)
802 {
803         struct mvebu_pcie_port *port = data;
804
805         clk_put(port->clk);
806 }
807
808 static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
809         struct mvebu_pcie_port *port, struct device_node *child)
810 {
811         struct device *dev = &pcie->pdev->dev;
812         enum of_gpio_flags flags;
813         int reset_gpio, ret;
814
815         port->pcie = pcie;
816
817         if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
818                 dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
819                          child);
820                 goto skip;
821         }
822
823         if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
824                 port->lane = 0;
825
826         port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
827                                     port->lane);
828         if (!port->name) {
829                 ret = -ENOMEM;
830                 goto err;
831         }
832
833         port->devfn = of_pci_get_devfn(child);
834         if (port->devfn < 0)
835                 goto skip;
836
837         ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
838                                  &port->mem_target, &port->mem_attr);
839         if (ret < 0) {
840                 dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
841                         port->name);
842                 goto skip;
843         }
844
845         if (resource_size(&pcie->io) != 0) {
846                 mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
847                                    &port->io_target, &port->io_attr);
848         } else {
849                 port->io_target = -1;
850                 port->io_attr = -1;
851         }
852
853         reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
854         if (reset_gpio == -EPROBE_DEFER) {
855                 ret = reset_gpio;
856                 goto err;
857         }
858
859         if (gpio_is_valid(reset_gpio)) {
860                 unsigned long gpio_flags;
861
862                 port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
863                                                   port->name);
864                 if (!port->reset_name) {
865                         ret = -ENOMEM;
866                         goto err;
867                 }
868
869                 if (flags & OF_GPIO_ACTIVE_LOW) {
870                         dev_info(dev, "%pOF: reset gpio is active low\n",
871                                  child);
872                         gpio_flags = GPIOF_ACTIVE_LOW |
873                                      GPIOF_OUT_INIT_LOW;
874                 } else {
875                         gpio_flags = GPIOF_OUT_INIT_HIGH;
876                 }
877
878                 ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
879                                             port->reset_name);
880                 if (ret) {
881                         if (ret == -EPROBE_DEFER)
882                                 goto err;
883                         goto skip;
884                 }
885
886                 port->reset_gpio = gpio_to_desc(reset_gpio);
887         }
888
889         port->clk = of_clk_get_by_name(child, NULL);
890         if (IS_ERR(port->clk)) {
891                 dev_err(dev, "%s: cannot get clock\n", port->name);
892                 goto skip;
893         }
894
895         ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
896         if (ret < 0) {
897                 clk_put(port->clk);
898                 goto err;
899         }
900
901         return 1;
902
903 skip:
904         ret = 0;
905
906         /* In the case of skipping, we need to free these */
907         devm_kfree(dev, port->reset_name);
908         port->reset_name = NULL;
909         devm_kfree(dev, port->name);
910         port->name = NULL;
911
912 err:
913         return ret;
914 }
915
916 /*
917  * Power up a PCIe port.  PCIe requires the refclk to be stable for 100µs
918  * prior to releasing PERST.  See table 2-4 in section 2.6.2 AC Specifications
919  * of the PCI Express Card Electromechanical Specification, 1.1.
920  */
921 static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
922 {
923         int ret;
924
925         ret = clk_prepare_enable(port->clk);
926         if (ret < 0)
927                 return ret;
928
929         if (port->reset_gpio) {
930                 u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
931
932                 of_property_read_u32(port->dn, "reset-delay-us",
933                                      &reset_udelay);
934
935                 udelay(100);
936
937                 gpiod_set_value_cansleep(port->reset_gpio, 0);
938                 msleep(reset_udelay / 1000);
939         }
940
941         return 0;
942 }
943
944 /*
945  * Power down a PCIe port.  Strictly, PCIe requires us to place the card
946  * in D3hot state before asserting PERST#.
947  */
948 static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
949 {
950         gpiod_set_value_cansleep(port->reset_gpio, 1);
951
952         clk_disable_unprepare(port->clk);
953 }
954
955 /*
956  * We can't use devm_of_pci_get_host_bridge_resources() because we
957  * need to parse our special DT properties encoding the MEM and IO
958  * apertures.
959  */
960 static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
961 {
962         struct device *dev = &pcie->pdev->dev;
963         struct device_node *np = dev->of_node;
964         int ret;
965
966         INIT_LIST_HEAD(&pcie->resources);
967
968         /* Get the bus range */
969         ret = of_pci_parse_bus_range(np, &pcie->busn);
970         if (ret) {
971                 dev_err(dev, "failed to parse bus-range property: %d\n", ret);
972                 return ret;
973         }
974         pci_add_resource(&pcie->resources, &pcie->busn);
975
976         /* Get the PCIe memory aperture */
977         mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
978         if (resource_size(&pcie->mem) == 0) {
979                 dev_err(dev, "invalid memory aperture size\n");
980                 return -EINVAL;
981         }
982
983         pcie->mem.name = "PCI MEM";
984         pci_add_resource(&pcie->resources, &pcie->mem);
985
986         /* Get the PCIe IO aperture */
987         mvebu_mbus_get_pcie_io_aperture(&pcie->io);
988
989         if (resource_size(&pcie->io) != 0) {
990                 pcie->realio.flags = pcie->io.flags;
991                 pcie->realio.start = PCIBIOS_MIN_IO;
992                 pcie->realio.end = min_t(resource_size_t,
993                                          IO_SPACE_LIMIT - SZ_64K,
994                                          resource_size(&pcie->io) - 1);
995                 pcie->realio.name = "PCI I/O";
996
997                 pci_add_resource(&pcie->resources, &pcie->realio);
998         }
999
1000         return devm_request_pci_bus_resources(dev, &pcie->resources);
1001 }
1002
1003 /*
1004  * This is a copy of pci_host_probe(), except that it does the I/O
1005  * remap as the last step, once we are sure we won't fail.
1006  *
1007  * It should be removed once the I/O remap error handling issue has
1008  * been sorted out.
1009  */
1010 static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
1011 {
1012         struct mvebu_pcie *pcie;
1013         struct pci_bus *bus, *child;
1014         int ret;
1015
1016         ret = pci_scan_root_bus_bridge(bridge);
1017         if (ret < 0) {
1018                 dev_err(bridge->dev.parent, "Scanning root bridge failed");
1019                 return ret;
1020         }
1021
1022         pcie = pci_host_bridge_priv(bridge);
1023         if (resource_size(&pcie->io) != 0) {
1024                 unsigned int i;
1025
1026                 for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
1027                         pci_ioremap_io(i, pcie->io.start + i);
1028         }
1029
1030         bus = bridge->bus;
1031
1032         /*
1033          * We insert PCI resources into the iomem_resource and
1034          * ioport_resource trees in either pci_bus_claim_resources()
1035          * or pci_bus_assign_resources().
1036          */
1037         if (pci_has_flag(PCI_PROBE_ONLY)) {
1038                 pci_bus_claim_resources(bus);
1039         } else {
1040                 pci_bus_size_bridges(bus);
1041                 pci_bus_assign_resources(bus);
1042
1043                 list_for_each_entry(child, &bus->children, node)
1044                         pcie_bus_configure_settings(child);
1045         }
1046
1047         pci_bus_add_devices(bus);
1048         return 0;
1049 }
1050
1051 static int mvebu_pcie_probe(struct platform_device *pdev)
1052 {
1053         struct device *dev = &pdev->dev;
1054         struct mvebu_pcie *pcie;
1055         struct pci_host_bridge *bridge;
1056         struct device_node *np = dev->of_node;
1057         struct device_node *child;
1058         int num, i, ret;
1059
1060         bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
1061         if (!bridge)
1062                 return -ENOMEM;
1063
1064         pcie = pci_host_bridge_priv(bridge);
1065         pcie->pdev = pdev;
1066         platform_set_drvdata(pdev, pcie);
1067
1068         ret = mvebu_pcie_parse_request_resources(pcie);
1069         if (ret)
1070                 return ret;
1071
1072         num = of_get_available_child_count(np);
1073
1074         pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
1075         if (!pcie->ports)
1076                 return -ENOMEM;
1077
1078         i = 0;
1079         for_each_available_child_of_node(np, child) {
1080                 struct mvebu_pcie_port *port = &pcie->ports[i];
1081
1082                 ret = mvebu_pcie_parse_port(pcie, port, child);
1083                 if (ret < 0) {
1084                         of_node_put(child);
1085                         return ret;
1086                 } else if (ret == 0) {
1087                         continue;
1088                 }
1089
1090                 port->dn = child;
1091                 i++;
1092         }
1093         pcie->nports = i;
1094
1095         for (i = 0; i < pcie->nports; i++) {
1096                 struct mvebu_pcie_port *port = &pcie->ports[i];
1097
1098                 child = port->dn;
1099                 if (!child)
1100                         continue;
1101
1102                 ret = mvebu_pcie_powerup(port);
1103                 if (ret < 0)
1104                         continue;
1105
1106                 port->base = mvebu_pcie_map_registers(pdev, child, port);
1107                 if (IS_ERR(port->base)) {
1108                         dev_err(dev, "%s: cannot map registers\n", port->name);
1109                         port->base = NULL;
1110                         mvebu_pcie_powerdown(port);
1111                         continue;
1112                 }
1113
1114                 mvebu_pcie_setup_hw(port);
1115                 mvebu_pcie_set_local_dev_nr(port, 1);
1116                 mvebu_pci_bridge_emul_init(port);
1117         }
1118
1119         pcie->nports = i;
1120
1121         list_splice_init(&pcie->resources, &bridge->windows);
1122         bridge->dev.parent = dev;
1123         bridge->sysdata = pcie;
1124         bridge->busnr = 0;
1125         bridge->ops = &mvebu_pcie_ops;
1126         bridge->map_irq = of_irq_parse_and_map_pci;
1127         bridge->swizzle_irq = pci_common_swizzle;
1128         bridge->align_resource = mvebu_pcie_align_resource;
1129         bridge->msi = pcie->msi;
1130
1131         return mvebu_pci_host_probe(bridge);
1132 }
1133
1134 static const struct of_device_id mvebu_pcie_of_match_table[] = {
1135         { .compatible = "marvell,armada-xp-pcie", },
1136         { .compatible = "marvell,armada-370-pcie", },
1137         { .compatible = "marvell,dove-pcie", },
1138         { .compatible = "marvell,kirkwood-pcie", },
1139         {},
1140 };
1141
1142 static const struct dev_pm_ops mvebu_pcie_pm_ops = {
1143         SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
1144 };
1145
1146 static struct platform_driver mvebu_pcie_driver = {
1147         .driver = {
1148                 .name = "mvebu-pcie",
1149                 .of_match_table = mvebu_pcie_of_match_table,
1150                 /* driver unloading/unbinding currently not supported */
1151                 .suppress_bind_attrs = true,
1152                 .pm = &mvebu_pcie_pm_ops,
1153         },
1154         .probe = mvebu_pcie_probe,
1155 };
1156 builtin_platform_driver(mvebu_pcie_driver);