Merge branch 'master' into upstream-fixes
[sfrench/cifs-2.6.git] / drivers / net / wireless / wavelan_cs.p.h
1 /*
2  *      Wavelan Pcmcia driver
3  *
4  *              Jean II - HPLB '96
5  *
6  * Reorganisation and extension of the driver.
7  *
8  * This file contain all definition and declarations necessary for the
9  * wavelan pcmcia driver. This file is a private header, so it should
10  * be included only on wavelan_cs.c !!!
11  */
12
13 #ifndef WAVELAN_CS_P_H
14 #define WAVELAN_CS_P_H
15
16 /************************** DOCUMENTATION **************************/
17 /*
18  * This driver provide a Linux interface to the Wavelan Pcmcia hardware
19  * The Wavelan is a product of Lucent (http://www.wavelan.com/).
20  * This division was formerly part of NCR and then AT&T.
21  * Wavelan are also distributed by DEC (RoamAbout DS)...
22  *
23  * To know how to use this driver, read the PCMCIA HOWTO.
24  * If you want to exploit the many other fonctionalities, look comments
25  * in the code...
26  *
27  * This driver is the result of the effort of many peoples (see below).
28  */
29
30 /* ------------------------ SPECIFIC NOTES ------------------------ */
31 /*
32  * Web page
33  * --------
34  *      I try to maintain a web page with the Wireless LAN Howto at :
35  *          http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
36  *
37  * SMP
38  * ---
39  *      We now are SMP compliant (I eventually fixed the remaining bugs).
40  *      The driver has been tested on a dual P6-150 and survived my usual
41  *      set of torture tests.
42  *      Anyway, I spent enough time chasing interrupt re-entrancy during
43  *      errors or reconfigure, and I designed the locked/unlocked sections
44  *      of the driver with great care, and with the recent addition of
45  *      the spinlock (thanks to the new API), we should be quite close to
46  *      the truth.
47  *      The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
48  *      but better safe than sorry (especially at 2 Mb/s ;-).
49  *
50  *      I have also looked into disabling only our interrupt on the card
51  *      (via HACR) instead of all interrupts in the processor (via cli),
52  *      so that other driver are not impacted, and it look like it's
53  *      possible, but it's very tricky to do right (full of races). As
54  *      the gain would be mostly for SMP systems, it can wait...
55  *
56  * Debugging and options
57  * ---------------------
58  *      You will find below a set of '#define" allowing a very fine control
59  *      on the driver behaviour and the debug messages printed.
60  *      The main options are :
61  *      o WAVELAN_ROAMING, for the experimental roaming support.
62  *      o SET_PSA_CRC, to have your card correctly recognised by
63  *        an access point and the Point-to-Point diagnostic tool.
64  *      o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
65  *        (otherwise we always start afresh with some defaults)
66  *
67  * wavelan_cs.o is darn too big
68  * -------------------------
69  *      That's true ! There is a very simple way to reduce the driver
70  *      object by 33% (yes !). Comment out the following line :
71  *              #include <linux/wireless.h>
72  *      Other compile options can also reduce the size of it...
73  *
74  * MAC address and hardware detection :
75  * ----------------------------------
76  *      The detection code of the wavelan chech that the first 3
77  *      octets of the MAC address fit the company code. This type of
78  *      detection work well for AT&T cards (because the AT&T code is
79  *      hardcoded in wavelan_cs.h), but of course will fail for other
80  *      manufacturer.
81  *
82  *      If you are sure that your card is derived from the wavelan,
83  *      here is the way to configure it :
84  *      1) Get your MAC address
85  *              a) With your card utilities (wfreqsel, instconf, ...)
86  *              b) With the driver :
87  *                      o compile the kernel with DEBUG_CONFIG_INFO enabled
88  *                      o Boot and look the card messages
89  *      2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
90  *      3) Compile & verify
91  *      4) Send me the MAC code - I will include it in the next version...
92  *
93  */
94
95 /* --------------------- WIRELESS EXTENSIONS --------------------- */
96 /*
97  * This driver is the first one to support "wireless extensions".
98  * This set of extensions provide you some way to control the wireless
99  * caracteristics of the hardware in a standard way and support for
100  * applications for taking advantage of it (like Mobile IP).
101  *
102  * It might be a good idea as well to fetch the wireless tools to
103  * configure the device and play a bit.
104  */
105
106 /* ---------------------------- FILES ---------------------------- */
107 /*
108  * wavelan_cs.c :       The actual code for the driver - C functions
109  *
110  * wavelan_cs.p.h :     Private header : local types / vars for the driver
111  *
112  * wavelan_cs.h :       Description of the hardware interface & structs
113  *
114  * i82593.h :           Description if the Ethernet controller
115  */
116
117 /* --------------------------- HISTORY --------------------------- */
118 /*
119  * The history of the Wavelan drivers is as complicated as history of
120  * the Wavelan itself (NCR -> AT&T -> Lucent).
121  *
122  * All started with Anders Klemets <klemets@paul.rutgers.edu>,
123  * writting a Wavelan ISA driver for the MACH microkernel. Girish
124  * Welling <welling@paul.rutgers.edu> had also worked on it.
125  * Keith Moore modify this for the Pcmcia hardware.
126  * 
127  * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
128  * and add specific Pcmcia support (there is currently no equivalent
129  * of the PCMCIA package under BSD...).
130  *
131  * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
132  *
133  * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
134  *
135  * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
136  * (with help of the BSDI PCMCIA driver) for PCMCIA.
137  * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
138  * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
139  * correctly 2.00 cards (2.4 GHz with frequency selection).
140  * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
141  * Pcmcia package (+ bug corrections).
142  *
143  * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
144  * patchs to the Pcmcia driver. After, I added code in the ISA driver
145  * for Wireless Extensions and full support of frequency selection
146  * cards. Now, I'm doing the same to the Pcmcia driver + some
147  * reorganisation.
148  * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
149  * much needed informations on the Wavelan hardware.
150  */
151
152 /* By the way : for the copyright & legal stuff :
153  * Almost everybody wrote code under GNU or BSD license (or alike),
154  * and want that their original copyright remain somewhere in the
155  * code (for myself, I go with the GPL).
156  * Nobody want to take responsibility for anything, except the fame...
157  */
158
159 /* --------------------------- CREDITS --------------------------- */
160 /*
161  * Credits:
162  *    Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
163  *      Loeke Brederveld of Lucent for providing extremely useful
164  *      information about WaveLAN PCMCIA hardware
165  *
166  *    This driver is based upon several other drivers, in particular:
167  *      David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
168  *      Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
169  *      Anders Klemets' PCMCIA WaveLAN adapter driver
170  *      Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
171  *
172  * Additional Credits:
173  *
174  *    This software was originally developed under Linux 1.2.3
175  *      (Slackware 2.0 distribution).
176  *    And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
177  *      with an HP OmniBook 4000 and then a 5500.
178  *
179  *    It is based on other device drivers and information either written
180  *    or supplied by:
181  *      James Ashton (jaa101@syseng.anu.edu.au),
182  *      Ajay Bakre (bakre@paul.rutgers.edu),
183  *      Donald Becker (becker@super.org),
184  *      Jim Binkley <jrb@cs.pdx.edu>,
185  *      Loeke Brederveld <lbrederv@wavelan.com>,
186  *      Allan Creighton (allanc@cs.su.oz.au),
187  *      Brent Elphick <belphick@uwaterloo.ca>,
188  *      Joe Finney <joe@comp.lancs.ac.uk>,
189  *      Matthew Geier (matthew@cs.su.oz.au),
190  *      Remo di Giovanni (remo@cs.su.oz.au),
191  *      Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
192  *      David Hinds <dahinds@users.sourceforge.net>,
193  *      Jan Hoogendoorn (c/o marteijn@lucent.com),
194  *      Bruce Janson <bruce@cs.usyd.edu.au>,
195  *      Anthony D. Joseph <adj@lcs.mit.edu>,
196  *      Anders Klemets (klemets@paul.rutgers.edu),
197  *      Yunzhou Li <yunzhou@strat.iol.unh.edu>,
198  *      Marc Meertens (mmeertens@lucent.com),
199  *      Keith Moore,
200  *      Robert Morris (rtm@das.harvard.edu),
201  *      Ian Parkin (ian@cs.su.oz.au),
202  *      John Rosenberg (johnr@cs.su.oz.au),
203  *      George Rossi (george@phm.gov.au),
204  *      Arthur Scott (arthur@cs.su.oz.au),
205  *      Stanislav Sinyagin <stas@isf.ru>
206  *      Peter Storey,
207  *      Jean Tourrilhes <jt@hpl.hp.com>,
208  *      Girish Welling (welling@paul.rutgers.edu)
209  *      Clark Woodworth <clark@hiway1.exit109.com>
210  *      Yongguang Zhang <ygz@isl.hrl.hac.com>...
211  */
212
213 /* ------------------------- IMPROVEMENTS ------------------------- */
214 /*
215  * I proudly present :
216  *
217  * Changes made in 2.8.22 :
218  * ----------------------
219  *      - improved wv_set_multicast_list
220  *      - catch spurious interrupt
221  *      - correct release of the device
222  *
223  * Changes mades in release :
224  * ------------------------
225  *      - Reorganisation of the code, function name change
226  *      - Creation of private header (wavelan_cs.h)
227  *      - Reorganised debug messages
228  *      - More comments, history, ...
229  *      - Configure earlier (in "insert" instead of "open")
230  *        and do things only once
231  *      - mmc_init : configure the PSA if not done
232  *      - mmc_init : 2.00 detection better code for 2.00 init
233  *      - better info at startup
234  *      - Correct a HUGE bug (volatile & uncalibrated busy loop)
235  *        in wv_82593_cmd => config speedup
236  *      - Stop receiving & power down on close (and power up on open)
237  *        use "ifconfig down" & "ifconfig up ; route add -net ..."
238  *      - Send packets : add watchdog instead of pooling
239  *      - Receive : check frame wrap around & try to recover some frames
240  *      - wavelan_set_multicast_list : avoid reset
241  *      - add wireless extensions (ioctl & get_wireless_stats)
242  *        get/set nwid/frequency on fly, info for /proc/net/wireless
243  *      - Suppress useless stuff from lp (net_local), but add link
244  *      - More inlines
245  *      - Lot of others minor details & cleanups
246  *
247  * Changes made in second release :
248  * ------------------------------
249  *      - Optimise wv_85893_reconfig stuff, fix potential problems
250  *      - Change error values for ioctl
251  *      - Non blocking wv_ru_stop() + call wv_reset() in case of problems
252  *      - Remove development printk from wavelan_watchdog()
253  *      - Remove of the watchdog to wavelan_close instead of wavelan_release
254  *        fix potential problems...
255  *      - Start debugging suspend stuff (but it's still a bit weird)
256  *      - Debug & optimize dump header/packet in Rx & Tx (debug)
257  *      - Use "readb" and "writeb" to be kernel 2.1 compliant
258  *      - Better handling of bogus interrupts
259  *      - Wireless extension : SETSPY and GETSPY
260  *      - Remove old stuff (stats - for those needing it, just ask me...)
261  *      - Make wireless extensions optional
262  *
263  * Changes made in third release :
264  * -----------------------------
265  *      - cleanups & typos
266  *      - modif wireless ext (spy -> only one pointer)
267  *      - new private ioctl to set/get quality & level threshold
268  *      - Init : correct default value of level threshold for pcmcia
269  *      - kill watchdog in hw_reset
270  *      - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
271  *      - Add message level (debug stuff in /var/adm/debug & errors not
272  *        displayed at console and still in /var/adm/messages)
273  *
274  * Changes made in fourth release :
275  * ------------------------------
276  *      - multicast support (yes !) thanks to Yongguang Zhang.
277  *
278  * Changes made in fifth release (2.9.0) :
279  * -------------------------------------
280  *      - Revisited multicast code (it was mostly wrong).
281  *      - protect code in wv_82593_reconfig with dev->tbusy (oups !)
282  *
283  * Changes made in sixth release (2.9.1a) :
284  * --------------------------------------
285  *      - Change the detection code for multi manufacturer code support
286  *      - Correct bug (hang kernel) in init when we were "rejecting" a card 
287  *
288  * Changes made in seventh release (2.9.1b) :
289  * ----------------------------------------
290  *      - Update to wireless extensions changes
291  *      - Silly bug in card initial configuration (psa_conf_status)
292  *
293  * Changes made in eigth release :
294  * -----------------------------
295  *      - Small bug in debug code (probably not the last one...)
296  *      - 1.2.13 support (thanks to Clark Woodworth)
297  *
298  * Changes made for release in 2.9.2b :
299  * ----------------------------------
300  *      - Level threshold is now a standard wireless extension (version 4 !)
301  *      - modules parameters types for kernel > 2.1.17
302  *      - updated man page
303  *      - Others cleanup from David Hinds
304  *
305  * Changes made for release in 2.9.5 :
306  * ---------------------------------
307  *      - byte count stats (courtesy of David Hinds)
308  *      - Remove dev_tint stuff (courtesy of David Hinds)
309  *      - Others cleanup from David Hinds
310  *      - Encryption setting from Brent Elphick (thanks a lot !)
311  *      - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
312  *
313  * Changes made for release in 2.9.6 :
314  * ---------------------------------
315  *      - fix bug : no longuer disable watchdog in case of bogus interrupt
316  *      - increase timeout in config code for picky hardware
317  *      - mask unused bits in status (Wireless Extensions)
318  *
319  * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
320  * -----------------------------------------------------------------
321  *      - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
322  *      - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
323  *      - Better initialisation of the i82593 controller
324  *        from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
325  *
326  * Changes made for release in 3.0.10 :
327  * ----------------------------------
328  *      - Fix eject "hang" of the driver under 2.2.X :
329  *              o create wv_flush_stale_links()
330  *              o Rename wavelan_release to wv_pcmcia_release & move up
331  *              o move unregister_netdev to wavelan_detach()
332  *              o wavelan_release() no longer call wavelan_detach()
333  *              o Suppress "release" timer
334  *              o Other cleanups & fixes
335  *      - New MAC address in the probe
336  *      - Reorg PSA_CRC code (endian neutral & cleaner)
337  *      - Correct initialisation of the i82593 from Lucent manual
338  *      - Put back the watchdog, with larger timeout
339  *      - TRANSMIT_NO_CRC is a "normal" error, so recover from it
340  *        from Derrick J Brashear <shadow@dementia.org>
341  *      - Better handling of TX and RX normal failure conditions
342  *      - #ifdef out all the roaming code
343  *      - Add ESSID & "AP current address" ioctl stubs
344  *      - General cleanup of the code
345  *
346  * Changes made for release in 3.0.13 :
347  * ----------------------------------
348  *      - Re-enable compilation of roaming code by default, but with
349  *        do_roaming = 0
350  *      - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
351  *        at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
352  *      - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
353  *
354  * Changes made for release in 3.0.15 :
355  * ----------------------------------
356  *      - Change e-mail and web page addresses
357  *      - Watchdog timer is now correctly expressed in HZ, not in jiffies
358  *      - Add channel number to the list of frequencies in range
359  *      - Add the (short) list of bit-rates in range
360  *      - Developp a new sensitivity... (sens.value & sens.fixed)
361  *
362  * Changes made for release in 3.1.2 :
363  * ---------------------------------
364  *      - Fix check for root permission (break instead of exit)
365  *      - New nwid & encoding setting (Wireless Extension 9)
366  *
367  * Changes made for release in 3.1.12 :
368  * ----------------------------------
369  *      - reworked wv_82593_cmd to avoid using the IRQ handler and doing
370  *        ugly things with interrupts.
371  *      - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
372  *      - Update to new network API (softnet - 2.3.43) :
373  *              o replace dev->tbusy (David + me)
374  *              o replace dev->tstart (David + me)
375  *              o remove dev->interrupt (David)
376  *              o add SMP locking via spinlock in splxx (me)
377  *              o add spinlock in interrupt handler (me)
378  *              o use kernel watchdog instead of ours (me)
379  *              o verify that all the changes make sense and work (me)
380  *      - Re-sync kernel/pcmcia versions (not much actually)
381  *      - A few other cleanups (David & me)...
382  *
383  * Changes made for release in 3.1.22 :
384  * ----------------------------------
385  *      - Check that SMP works, remove annoying log message
386  *
387  * Changes made for release in 3.1.24 :
388  * ----------------------------------
389  *      - Fix unfrequent card lockup when watchdog was reseting the hardware :
390  *              o control first busy loop in wv_82593_cmd()
391  *              o Extend spinlock protection in wv_hw_config()
392  *
393  * Changes made for release in 3.1.33 :
394  * ----------------------------------
395  *      - Optional use new driver API for Wireless Extensions :
396  *              o got rid of wavelan_ioctl()
397  *              o use a bunch of iw_handler instead
398  *
399  * Changes made for release in 3.2.1 :
400  * ---------------------------------
401  *      - Set dev->trans_start to avoid filling the logs
402  *              (and generating useless abort commands)
403  *      - Avoid deadlocks in mmc_out()/mmc_in()
404  *
405  * Wishes & dreams:
406  * ----------------
407  *      - Cleanup and integrate the roaming code
408  *        (std debug, set DomainID, decay avg and co...)
409  */
410
411 /***************************** INCLUDES *****************************/
412
413 /* Linux headers that we need */
414 #include <linux/module.h>
415 #include <linux/kernel.h>
416 #include <linux/init.h>
417 #include <linux/sched.h>
418 #include <linux/ptrace.h>
419 #include <linux/slab.h>
420 #include <linux/string.h>
421 #include <linux/timer.h>
422 #include <linux/interrupt.h>
423 #include <linux/spinlock.h>
424 #include <linux/in.h>
425 #include <linux/delay.h>
426 #include <linux/bitops.h>
427 #include <asm/uaccess.h>
428 #include <asm/io.h>
429 #include <asm/system.h>
430
431 #include <linux/netdevice.h>
432 #include <linux/etherdevice.h>
433 #include <linux/skbuff.h>
434 #include <linux/if_arp.h>
435 #include <linux/ioport.h>
436 #include <linux/fcntl.h>
437 #include <linux/ethtool.h>
438 #include <linux/wireless.h>             /* Wireless extensions */
439 #include <net/iw_handler.h>             /* New driver API */
440
441 /* Pcmcia headers that we need */
442 #include <pcmcia/cs_types.h>
443 #include <pcmcia/cs.h>
444 #include <pcmcia/cistpl.h>
445 #include <pcmcia/cisreg.h>
446 #include <pcmcia/ds.h>
447
448 /* Wavelan declarations */
449 #include "i82593.h"     /* Definitions for the Intel chip */
450
451 #include "wavelan_cs.h" /* Others bits of the hardware */
452
453 /************************** DRIVER OPTIONS **************************/
454 /*
455  * `#define' or `#undef' the following constant to change the behaviour
456  * of the driver...
457  */
458 #define WAVELAN_ROAMING         /* Include experimental roaming code */
459 #undef WAVELAN_ROAMING_EXT      /* Enable roaming wireless extensions */
460 #undef SET_PSA_CRC              /* Set the CRC in PSA (slower) */
461 #define USE_PSA_CONFIG          /* Use info from the PSA */
462 #undef STRUCT_CHECK             /* Verify padding of structures */
463 #undef EEPROM_IS_PROTECTED      /* Doesn't seem to be necessary */
464 #define MULTICAST_AVOID         /* Avoid extra multicast (I'm sceptical) */
465 #undef SET_MAC_ADDRESS          /* Experimental */
466
467 /* Warning : these stuff will slow down the driver... */
468 #define WIRELESS_SPY            /* Enable spying addresses */
469 #undef HISTOGRAM                /* Enable histogram of sig level... */
470
471 /****************************** DEBUG ******************************/
472
473 #undef DEBUG_MODULE_TRACE       /* Module insertion/removal */
474 #undef DEBUG_CALLBACK_TRACE     /* Calls made by Linux */
475 #undef DEBUG_INTERRUPT_TRACE    /* Calls to handler */
476 #undef DEBUG_INTERRUPT_INFO     /* type of interrupt & so on */
477 #define DEBUG_INTERRUPT_ERROR   /* problems */
478 #undef DEBUG_CONFIG_TRACE       /* Trace the config functions */
479 #undef DEBUG_CONFIG_INFO        /* What's going on... */
480 #define DEBUG_CONFIG_ERRORS     /* Errors on configuration */
481 #undef DEBUG_TX_TRACE           /* Transmission calls */
482 #undef DEBUG_TX_INFO            /* Header of the transmitted packet */
483 #undef DEBUG_TX_FAIL            /* Normal failure conditions */
484 #define DEBUG_TX_ERROR          /* Unexpected conditions */
485 #undef DEBUG_RX_TRACE           /* Transmission calls */
486 #undef DEBUG_RX_INFO            /* Header of the transmitted packet */
487 #undef DEBUG_RX_FAIL            /* Normal failure conditions */
488 #define DEBUG_RX_ERROR          /* Unexpected conditions */
489 #undef DEBUG_PACKET_DUMP        /* Dump packet on the screen */
490 #undef DEBUG_IOCTL_TRACE        /* Misc call by Linux */
491 #undef DEBUG_IOCTL_INFO         /* Various debug info */
492 #define DEBUG_IOCTL_ERROR       /* What's going wrong */
493 #define DEBUG_BASIC_SHOW        /* Show basic startup info */
494 #undef DEBUG_VERSION_SHOW       /* Print version info */
495 #undef DEBUG_PSA_SHOW           /* Dump psa to screen */
496 #undef DEBUG_MMC_SHOW           /* Dump mmc to screen */
497 #undef DEBUG_SHOW_UNUSED        /* Show also unused fields */
498 #undef DEBUG_I82593_SHOW        /* Show i82593 status */
499 #undef DEBUG_DEVICE_SHOW        /* Show device parameters */
500
501 /************************ CONSTANTS & MACROS ************************/
502
503 #ifdef DEBUG_VERSION_SHOW
504 static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n";
505 #endif
506
507 /* Watchdog temporisation */
508 #define WATCHDOG_JIFFIES        (256*HZ/100)
509
510 /* Fix a bug in some old wireless extension definitions */
511 #ifndef IW_ESSID_MAX_SIZE
512 #define IW_ESSID_MAX_SIZE       32
513 #endif
514
515 /* ------------------------ PRIVATE IOCTL ------------------------ */
516
517 #define SIOCSIPQTHR     SIOCIWFIRSTPRIV         /* Set quality threshold */
518 #define SIOCGIPQTHR     SIOCIWFIRSTPRIV + 1     /* Get quality threshold */
519 #define SIOCSIPROAM     SIOCIWFIRSTPRIV + 2     /* Set roaming state */
520 #define SIOCGIPROAM     SIOCIWFIRSTPRIV + 3     /* Get roaming state */
521
522 #define SIOCSIPHISTO    SIOCIWFIRSTPRIV + 4     /* Set histogram ranges */
523 #define SIOCGIPHISTO    SIOCIWFIRSTPRIV + 5     /* Get histogram values */
524
525 /*************************** WaveLAN Roaming  **************************/
526 #ifdef WAVELAN_ROAMING          /* Conditional compile, see above in options */
527
528 #define WAVELAN_ROAMING_DEBUG    0      /* 1 = Trace of handover decisions */
529                                         /* 2 = Info on each beacon rcvd... */
530 #define MAX_WAVEPOINTS          7       /* Max visible at one time */
531 #define WAVEPOINT_HISTORY       5       /* SNR sample history slow search */
532 #define WAVEPOINT_FAST_HISTORY  2       /* SNR sample history fast search */
533 #define SEARCH_THRESH_LOW       10      /* SNR to enter cell search */
534 #define SEARCH_THRESH_HIGH      13      /* SNR to leave cell search */
535 #define WAVELAN_ROAMING_DELTA   1       /* Hysteresis value (+/- SNR) */
536 #define CELL_TIMEOUT            2*HZ    /* in jiffies */
537
538 #define FAST_CELL_SEARCH        1       /* Boolean values... */
539 #define NWID_PROMISC            1       /* for code clarity. */
540
541 typedef struct wavepoint_beacon
542 {
543   unsigned char         dsap,           /* Unused */
544                         ssap,           /* Unused */
545                         ctrl,           /* Unused */
546                         O,U,I,          /* Unused */
547                         spec_id1,       /* Unused */
548                         spec_id2,       /* Unused */
549                         pdu_type,       /* Unused */
550                         seq;            /* WavePoint beacon sequence number */
551   unsigned short        domain_id,      /* WavePoint Domain ID */
552                         nwid;           /* WavePoint NWID */
553 } wavepoint_beacon;
554
555 typedef struct wavepoint_history
556 {
557   unsigned short        nwid;           /* WavePoint's NWID */
558   int                   average_slow;   /* SNR running average */
559   int                   average_fast;   /* SNR running average */
560   unsigned char   sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
561   unsigned char         qualptr;        /* Index into ringbuffer */
562   unsigned char         last_seq;       /* Last seq. no seen for WavePoint */
563   struct wavepoint_history *next;       /* Next WavePoint in table */
564   struct wavepoint_history *prev;       /* Previous WavePoint in table */
565   unsigned long         last_seen;      /* Time of last beacon recvd, jiffies */
566 } wavepoint_history;
567
568 struct wavepoint_table
569 {
570   wavepoint_history     *head;          /* Start of ringbuffer */
571   int                   num_wavepoints; /* No. of WavePoints visible */
572   unsigned char         locked;         /* Table lock */
573 };
574
575 #endif  /* WAVELAN_ROAMING */
576
577 /****************************** TYPES ******************************/
578
579 /* Shortcuts */
580 typedef struct net_device_stats en_stats;
581 typedef struct iw_statistics    iw_stats;
582 typedef struct iw_quality       iw_qual;
583 typedef struct iw_freq          iw_freq;
584 typedef struct net_local        net_local;
585 typedef struct timer_list       timer_list;
586
587 /* Basic types */
588 typedef u_char          mac_addr[WAVELAN_ADDR_SIZE];    /* Hardware address */
589
590 /*
591  * Static specific data for the interface.
592  *
593  * For each network interface, Linux keep data in two structure. "device"
594  * keep the generic data (same format for everybody) and "net_local" keep
595  * the additional specific data.
596  * Note that some of this specific data is in fact generic (en_stats, for
597  * example).
598  */
599 struct net_local
600 {
601   dev_node_t    node;           /* ???? What is this stuff ???? */
602   struct net_device *   dev;            /* Reverse link... */
603   spinlock_t    spinlock;       /* Serialize access to the hardware (SMP) */
604   struct pcmcia_device *        link;           /* pcmcia structure */
605   en_stats      stats;          /* Ethernet interface statistics */
606   int           nresets;        /* Number of hw resets */
607   u_char        configured;     /* If it is configured */
608   u_char        reconfig_82593; /* Need to reconfigure the controller */
609   u_char        promiscuous;    /* Promiscuous mode */
610   u_char        allmulticast;   /* All Multicast mode */
611   int           mc_count;       /* Number of multicast addresses */
612
613   int           stop;           /* Current i82593 Stop Hit Register */
614   int           rfp;            /* Last DMA machine receive pointer */
615   int           overrunning;    /* Receiver overrun flag */
616
617   iw_stats      wstats;         /* Wireless specific stats */
618
619   struct iw_spy_data    spy_data;
620   struct iw_public_data wireless_data;
621
622 #ifdef HISTOGRAM
623   int           his_number;             /* Number of intervals */
624   u_char        his_range[16];          /* Boundaries of interval ]n-1; n] */
625   u_long        his_sum[16];            /* Sum in interval */
626 #endif  /* HISTOGRAM */
627 #ifdef WAVELAN_ROAMING
628   u_long        domain_id;      /* Domain ID we lock on for roaming */
629   int           filter_domains; /* Check Domain ID of beacon found */
630  struct wavepoint_table wavepoint_table;        /* Table of visible WavePoints*/
631   wavepoint_history *   curr_point;             /* Current wavepoint */
632   int                   cell_search;            /* Searching for new cell? */
633   struct timer_list     cell_timer;             /* Garbage collection */
634 #endif  /* WAVELAN_ROAMING */
635   void __iomem *mem;
636 };
637
638 /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
639 static inline u_char            /* data */
640         hasr_read(u_long);      /* Read the host interface : base address */
641 static inline void
642         hacr_write(u_long,      /* Write to host interface : base address */
643                    u_char),     /* data */
644         hacr_write_slow(u_long,
645                    u_char);
646 static void
647         psa_read(struct net_device *,   /* Read the Parameter Storage Area */
648                  int,           /* offset in PSA */
649                  u_char *,      /* buffer to fill */
650                  int),          /* size to read */
651         psa_write(struct net_device *,  /* Write to the PSA */
652                   int,          /* Offset in psa */
653                   u_char *,     /* Buffer in memory */
654                   int);         /* Length of buffer */
655 static inline void
656         mmc_out(u_long,         /* Write 1 byte to the Modem Manag Control */
657                 u_short,
658                 u_char),
659         mmc_write(u_long,       /* Write n bytes to the MMC */
660                   u_char,
661                   u_char *,
662                   int);
663 static inline u_char            /* Read 1 byte from the MMC */
664         mmc_in(u_long,
665                u_short);
666 static inline void
667         mmc_read(u_long,        /* Read n bytes from the MMC */
668                  u_char,
669                  u_char *,
670                  int),
671         fee_wait(u_long,        /* Wait for frequency EEprom : base address */
672                  int,           /* Base delay to wait for */
673                  int);          /* Number of time to wait */
674 static void
675         fee_read(u_long,        /* Read the frequency EEprom : base address */
676                  u_short,       /* destination offset */
677                  u_short *,     /* data buffer */
678                  int);          /* number of registers */
679 /* ---------------------- I82593 SUBROUTINES ----------------------- */
680 static int
681         wv_82593_cmd(struct net_device *,       /* synchronously send a command to i82593 */ 
682                      char *,
683                      int,
684                      int);
685 static inline int
686         wv_diag(struct net_device *);   /* Diagnostique the i82593 */
687 static int
688         read_ringbuf(struct net_device *,       /* Read a receive buffer */
689                      int,
690                      char *,
691                      int);
692 static inline void
693         wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */
694 /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
695 static inline void
696         wv_init_info(struct net_device *);      /* display startup info */
697 /* ------------------- IOCTL, STATS & RECONFIG ------------------- */
698 static en_stats *
699         wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */
700 static iw_stats *
701         wavelan_get_wireless_stats(struct net_device *);
702 /* ----------------------- PACKET RECEPTION ----------------------- */
703 static inline int
704         wv_start_of_frame(struct net_device *,  /* Seek beggining of current frame */
705                           int,  /* end of frame */
706                           int); /* start of buffer */
707 static inline void
708         wv_packet_read(struct net_device *,     /* Read a packet from a frame */
709                        int,
710                        int),
711         wv_packet_rcv(struct net_device *);     /* Read all packets waiting */
712 /* --------------------- PACKET TRANSMISSION --------------------- */
713 static inline void
714         wv_packet_write(struct net_device *,    /* Write a packet to the Tx buffer */
715                         void *,
716                         short);
717 static int
718         wavelan_packet_xmit(struct sk_buff *,   /* Send a packet */
719                             struct net_device *);
720 /* -------------------- HARDWARE CONFIGURATION -------------------- */
721 static inline int
722         wv_mmc_init(struct net_device *);       /* Initialize the modem */
723 static int
724         wv_ru_stop(struct net_device *),        /* Stop the i82593 receiver unit */
725         wv_ru_start(struct net_device *);       /* Start the i82593 receiver unit */
726 static int
727         wv_82593_config(struct net_device *);   /* Configure the i82593 */
728 static inline int
729         wv_pcmcia_reset(struct net_device *);   /* Reset the pcmcia interface */
730 static int
731         wv_hw_config(struct net_device *);      /* Reset & configure the whole hardware */
732 static inline void
733         wv_hw_reset(struct net_device *);       /* Same, + start receiver unit */
734 static inline int
735         wv_pcmcia_config(struct pcmcia_device *);       /* Configure the pcmcia interface */
736 static void
737         wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */
738 /* ---------------------- INTERRUPT HANDLING ---------------------- */
739 static irqreturn_t
740         wavelan_interrupt(int,  /* Interrupt handler */
741                           void *);
742 static void
743         wavelan_watchdog(struct net_device *);  /* Transmission watchdog */
744 /* ------------------- CONFIGURATION CALLBACKS ------------------- */
745 static int
746         wavelan_open(struct net_device *),              /* Open the device */
747         wavelan_close(struct net_device *);     /* Close the device */
748 static void
749         wavelan_detach(struct pcmcia_device *p_dev);    /* Destroy a removed device */
750
751 /**************************** VARIABLES ****************************/
752
753 /*
754  * Parameters that can be set with 'insmod'
755  * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
756  */
757
758 /* Shared memory speed, in ns */
759 static int      mem_speed = 0;
760
761 /* New module interface */
762 module_param(mem_speed, int, 0);
763
764 #ifdef WAVELAN_ROAMING          /* Conditional compile, see above in options */
765 /* Enable roaming mode ? No ! Please keep this to 0 */
766 static int      do_roaming = 0;
767 module_param(do_roaming, bool, 0);
768 #endif  /* WAVELAN_ROAMING */
769
770 MODULE_LICENSE("GPL");
771
772 #endif  /* WAVELAN_CS_P_H */
773