Merge remote-tracking branches 'asoc/fix/msm8916', 'asoc/fix/nau8825', 'asoc/fix...
[sfrench/cifs-2.6.git] / drivers / net / wireless / ti / wl1251 / main.c
1 /*
2  * This file is part of wl1251
3  *
4  * Copyright (C) 2008-2009 Nokia Corporation
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18  * 02110-1301 USA
19  *
20  */
21
22 #include <linux/module.h>
23 #include <linux/interrupt.h>
24 #include <linux/firmware.h>
25 #include <linux/delay.h>
26 #include <linux/irq.h>
27 #include <linux/crc32.h>
28 #include <linux/etherdevice.h>
29 #include <linux/vmalloc.h>
30 #include <linux/slab.h>
31 #include <linux/netdevice.h>
32
33 #include "wl1251.h"
34 #include "wl12xx_80211.h"
35 #include "reg.h"
36 #include "io.h"
37 #include "cmd.h"
38 #include "event.h"
39 #include "tx.h"
40 #include "rx.h"
41 #include "ps.h"
42 #include "init.h"
43 #include "debugfs.h"
44 #include "boot.h"
45
46 void wl1251_enable_interrupts(struct wl1251 *wl)
47 {
48         wl->if_ops->enable_irq(wl);
49 }
50
51 void wl1251_disable_interrupts(struct wl1251 *wl)
52 {
53         wl->if_ops->disable_irq(wl);
54 }
55
56 static int wl1251_power_off(struct wl1251 *wl)
57 {
58         return wl->if_ops->power(wl, false);
59 }
60
61 static int wl1251_power_on(struct wl1251 *wl)
62 {
63         return wl->if_ops->power(wl, true);
64 }
65
66 static int wl1251_fetch_firmware(struct wl1251 *wl)
67 {
68         const struct firmware *fw;
69         struct device *dev = wiphy_dev(wl->hw->wiphy);
70         int ret;
71
72         ret = request_firmware(&fw, WL1251_FW_NAME, dev);
73
74         if (ret < 0) {
75                 wl1251_error("could not get firmware: %d", ret);
76                 return ret;
77         }
78
79         if (fw->size % 4) {
80                 wl1251_error("firmware size is not multiple of 32 bits: %zu",
81                              fw->size);
82                 ret = -EILSEQ;
83                 goto out;
84         }
85
86         wl->fw_len = fw->size;
87         wl->fw = vmalloc(wl->fw_len);
88
89         if (!wl->fw) {
90                 wl1251_error("could not allocate memory for the firmware");
91                 ret = -ENOMEM;
92                 goto out;
93         }
94
95         memcpy(wl->fw, fw->data, wl->fw_len);
96
97         ret = 0;
98
99 out:
100         release_firmware(fw);
101
102         return ret;
103 }
104
105 static int wl1251_fetch_nvs(struct wl1251 *wl)
106 {
107         const struct firmware *fw;
108         struct device *dev = wiphy_dev(wl->hw->wiphy);
109         int ret;
110
111         ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
112
113         if (ret < 0) {
114                 wl1251_error("could not get nvs file: %d", ret);
115                 return ret;
116         }
117
118         if (fw->size % 4) {
119                 wl1251_error("nvs size is not multiple of 32 bits: %zu",
120                              fw->size);
121                 ret = -EILSEQ;
122                 goto out;
123         }
124
125         wl->nvs_len = fw->size;
126         wl->nvs = kmemdup(fw->data, wl->nvs_len, GFP_KERNEL);
127
128         if (!wl->nvs) {
129                 wl1251_error("could not allocate memory for the nvs file");
130                 ret = -ENOMEM;
131                 goto out;
132         }
133
134         ret = 0;
135
136 out:
137         release_firmware(fw);
138
139         return ret;
140 }
141
142 static void wl1251_fw_wakeup(struct wl1251 *wl)
143 {
144         u32 elp_reg;
145
146         elp_reg = ELPCTRL_WAKE_UP;
147         wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
148         elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
149
150         if (!(elp_reg & ELPCTRL_WLAN_READY))
151                 wl1251_warning("WLAN not ready");
152 }
153
154 static int wl1251_chip_wakeup(struct wl1251 *wl)
155 {
156         int ret;
157
158         ret = wl1251_power_on(wl);
159         if (ret < 0)
160                 return ret;
161
162         msleep(WL1251_POWER_ON_SLEEP);
163         wl->if_ops->reset(wl);
164
165         /* We don't need a real memory partition here, because we only want
166          * to use the registers at this point. */
167         wl1251_set_partition(wl,
168                              0x00000000,
169                              0x00000000,
170                              REGISTERS_BASE,
171                              REGISTERS_DOWN_SIZE);
172
173         /* ELP module wake up */
174         wl1251_fw_wakeup(wl);
175
176         /* whal_FwCtrl_BootSm() */
177
178         /* 0. read chip id from CHIP_ID */
179         wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
180
181         /* 1. check if chip id is valid */
182
183         switch (wl->chip_id) {
184         case CHIP_ID_1251_PG12:
185                 wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
186                              wl->chip_id);
187                 break;
188         case CHIP_ID_1251_PG11:
189                 wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
190                              wl->chip_id);
191                 break;
192         case CHIP_ID_1251_PG10:
193         default:
194                 wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
195                 ret = -ENODEV;
196                 goto out;
197         }
198
199         if (wl->fw == NULL) {
200                 ret = wl1251_fetch_firmware(wl);
201                 if (ret < 0)
202                         goto out;
203         }
204
205         if (wl->nvs == NULL && !wl->use_eeprom) {
206                 /* No NVS from netlink, try to get it from the filesystem */
207                 ret = wl1251_fetch_nvs(wl);
208                 if (ret < 0)
209                         goto out;
210         }
211
212 out:
213         return ret;
214 }
215
216 #define WL1251_IRQ_LOOP_COUNT 10
217 static void wl1251_irq_work(struct work_struct *work)
218 {
219         u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
220         struct wl1251 *wl =
221                 container_of(work, struct wl1251, irq_work);
222         int ret;
223
224         mutex_lock(&wl->mutex);
225
226         wl1251_debug(DEBUG_IRQ, "IRQ work");
227
228         if (wl->state == WL1251_STATE_OFF)
229                 goto out;
230
231         ret = wl1251_ps_elp_wakeup(wl);
232         if (ret < 0)
233                 goto out;
234
235         wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
236
237         intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
238         wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
239
240         do {
241                 if (wl->data_path) {
242                         wl->rx_counter = wl1251_mem_read32(
243                                 wl, wl->data_path->rx_control_addr);
244
245                         /* We handle a frmware bug here */
246                         switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
247                         case 0:
248                                 wl1251_debug(DEBUG_IRQ,
249                                              "RX: FW and host in sync");
250                                 intr &= ~WL1251_ACX_INTR_RX0_DATA;
251                                 intr &= ~WL1251_ACX_INTR_RX1_DATA;
252                                 break;
253                         case 1:
254                                 wl1251_debug(DEBUG_IRQ, "RX: FW +1");
255                                 intr |= WL1251_ACX_INTR_RX0_DATA;
256                                 intr &= ~WL1251_ACX_INTR_RX1_DATA;
257                                 break;
258                         case 2:
259                                 wl1251_debug(DEBUG_IRQ, "RX: FW +2");
260                                 intr |= WL1251_ACX_INTR_RX0_DATA;
261                                 intr |= WL1251_ACX_INTR_RX1_DATA;
262                                 break;
263                         default:
264                                 wl1251_warning(
265                                         "RX: FW and host out of sync: %d",
266                                         wl->rx_counter - wl->rx_handled);
267                                 break;
268                         }
269
270                         wl->rx_handled = wl->rx_counter;
271
272                         wl1251_debug(DEBUG_IRQ, "RX counter: %d",
273                                      wl->rx_counter);
274                 }
275
276                 intr &= wl->intr_mask;
277
278                 if (intr == 0) {
279                         wl1251_debug(DEBUG_IRQ, "INTR is 0");
280                         goto out_sleep;
281                 }
282
283                 if (intr & WL1251_ACX_INTR_RX0_DATA) {
284                         wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
285                         wl1251_rx(wl);
286                 }
287
288                 if (intr & WL1251_ACX_INTR_RX1_DATA) {
289                         wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
290                         wl1251_rx(wl);
291                 }
292
293                 if (intr & WL1251_ACX_INTR_TX_RESULT) {
294                         wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
295                         wl1251_tx_complete(wl);
296                 }
297
298                 if (intr & WL1251_ACX_INTR_EVENT_A) {
299                         wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A");
300                         wl1251_event_handle(wl, 0);
301                 }
302
303                 if (intr & WL1251_ACX_INTR_EVENT_B) {
304                         wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B");
305                         wl1251_event_handle(wl, 1);
306                 }
307
308                 if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
309                         wl1251_debug(DEBUG_IRQ,
310                                      "WL1251_ACX_INTR_INIT_COMPLETE");
311
312                 if (--ctr == 0)
313                         break;
314
315                 intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
316         } while (intr);
317
318 out_sleep:
319         wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
320         wl1251_ps_elp_sleep(wl);
321
322 out:
323         mutex_unlock(&wl->mutex);
324 }
325
326 static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
327                        u16 beacon_interval, u8 dtim_period)
328 {
329         int ret;
330
331         ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
332                                      DEFAULT_HW_GEN_MODULATION_TYPE,
333                                      wl->tx_mgmt_frm_rate,
334                                      wl->tx_mgmt_frm_mod);
335         if (ret < 0)
336                 goto out;
337
338         /*
339          * Join command applies filters, and if we are not associated,
340          * BSSID filter must be disabled for association to work.
341          */
342         if (is_zero_ether_addr(wl->bssid))
343                 wl->rx_config &= ~CFG_BSSID_FILTER_EN;
344
345         ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
346                               dtim_period);
347         if (ret < 0)
348                 goto out;
349
350         ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
351         if (ret < 0)
352                 wl1251_warning("join timeout");
353
354 out:
355         return ret;
356 }
357
358 static void wl1251_op_tx(struct ieee80211_hw *hw,
359                          struct ieee80211_tx_control *control,
360                          struct sk_buff *skb)
361 {
362         struct wl1251 *wl = hw->priv;
363         unsigned long flags;
364
365         skb_queue_tail(&wl->tx_queue, skb);
366
367         /*
368          * The chip specific setup must run before the first TX packet -
369          * before that, the tx_work will not be initialized!
370          */
371
372         ieee80211_queue_work(wl->hw, &wl->tx_work);
373
374         /*
375          * The workqueue is slow to process the tx_queue and we need stop
376          * the queue here, otherwise the queue will get too long.
377          */
378         if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_HIGH_WATERMARK) {
379                 wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
380
381                 spin_lock_irqsave(&wl->wl_lock, flags);
382                 ieee80211_stop_queues(wl->hw);
383                 wl->tx_queue_stopped = true;
384                 spin_unlock_irqrestore(&wl->wl_lock, flags);
385         }
386 }
387
388 static int wl1251_op_start(struct ieee80211_hw *hw)
389 {
390         struct wl1251 *wl = hw->priv;
391         struct wiphy *wiphy = hw->wiphy;
392         int ret = 0;
393
394         wl1251_debug(DEBUG_MAC80211, "mac80211 start");
395
396         mutex_lock(&wl->mutex);
397
398         if (wl->state != WL1251_STATE_OFF) {
399                 wl1251_error("cannot start because not in off state: %d",
400                              wl->state);
401                 ret = -EBUSY;
402                 goto out;
403         }
404
405         ret = wl1251_chip_wakeup(wl);
406         if (ret < 0)
407                 goto out;
408
409         ret = wl1251_boot(wl);
410         if (ret < 0)
411                 goto out;
412
413         ret = wl1251_hw_init(wl);
414         if (ret < 0)
415                 goto out;
416
417         ret = wl1251_acx_station_id(wl);
418         if (ret < 0)
419                 goto out;
420
421         wl->state = WL1251_STATE_ON;
422
423         wl1251_info("firmware booted (%s)", wl->fw_ver);
424
425         /* update hw/fw version info in wiphy struct */
426         wiphy->hw_version = wl->chip_id;
427         strncpy(wiphy->fw_version, wl->fw_ver, sizeof(wiphy->fw_version));
428
429 out:
430         if (ret < 0)
431                 wl1251_power_off(wl);
432
433         mutex_unlock(&wl->mutex);
434
435         return ret;
436 }
437
438 static void wl1251_op_stop(struct ieee80211_hw *hw)
439 {
440         struct wl1251 *wl = hw->priv;
441
442         wl1251_info("down");
443
444         wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
445
446         mutex_lock(&wl->mutex);
447
448         WARN_ON(wl->state != WL1251_STATE_ON);
449
450         if (wl->scanning) {
451                 struct cfg80211_scan_info info = {
452                         .aborted = true,
453                 };
454
455                 ieee80211_scan_completed(wl->hw, &info);
456                 wl->scanning = false;
457         }
458
459         wl->state = WL1251_STATE_OFF;
460
461         wl1251_disable_interrupts(wl);
462
463         mutex_unlock(&wl->mutex);
464
465         cancel_work_sync(&wl->irq_work);
466         cancel_work_sync(&wl->tx_work);
467         cancel_delayed_work_sync(&wl->elp_work);
468
469         mutex_lock(&wl->mutex);
470
471         /* let's notify MAC80211 about the remaining pending TX frames */
472         wl1251_tx_flush(wl);
473         wl1251_power_off(wl);
474
475         eth_zero_addr(wl->bssid);
476         wl->listen_int = 1;
477         wl->bss_type = MAX_BSS_TYPE;
478
479         wl->data_in_count = 0;
480         wl->rx_counter = 0;
481         wl->rx_handled = 0;
482         wl->rx_current_buffer = 0;
483         wl->rx_last_id = 0;
484         wl->next_tx_complete = 0;
485         wl->elp = false;
486         wl->station_mode = STATION_ACTIVE_MODE;
487         wl->psm_entry_retry = 0;
488         wl->tx_queue_stopped = false;
489         wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
490         wl->rssi_thold = 0;
491         wl->channel = WL1251_DEFAULT_CHANNEL;
492         wl->monitor_present = false;
493         wl->joined = false;
494
495         wl1251_debugfs_reset(wl);
496
497         mutex_unlock(&wl->mutex);
498 }
499
500 static int wl1251_op_add_interface(struct ieee80211_hw *hw,
501                                    struct ieee80211_vif *vif)
502 {
503         struct wl1251 *wl = hw->priv;
504         int ret = 0;
505
506         vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
507                              IEEE80211_VIF_SUPPORTS_UAPSD |
508                              IEEE80211_VIF_SUPPORTS_CQM_RSSI;
509
510         wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
511                      vif->type, vif->addr);
512
513         mutex_lock(&wl->mutex);
514         if (wl->vif) {
515                 ret = -EBUSY;
516                 goto out;
517         }
518
519         wl->vif = vif;
520
521         switch (vif->type) {
522         case NL80211_IFTYPE_STATION:
523                 wl->bss_type = BSS_TYPE_STA_BSS;
524                 break;
525         case NL80211_IFTYPE_ADHOC:
526                 wl->bss_type = BSS_TYPE_IBSS;
527                 break;
528         default:
529                 ret = -EOPNOTSUPP;
530                 goto out;
531         }
532
533         if (!ether_addr_equal_unaligned(wl->mac_addr, vif->addr)) {
534                 memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
535                 SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
536                 ret = wl1251_acx_station_id(wl);
537                 if (ret < 0)
538                         goto out;
539         }
540
541 out:
542         mutex_unlock(&wl->mutex);
543         return ret;
544 }
545
546 static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
547                                          struct ieee80211_vif *vif)
548 {
549         struct wl1251 *wl = hw->priv;
550
551         mutex_lock(&wl->mutex);
552         wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
553         wl->vif = NULL;
554         eth_zero_addr(wl->bssid);
555         mutex_unlock(&wl->mutex);
556 }
557
558 static int wl1251_build_null_data(struct wl1251 *wl)
559 {
560         struct sk_buff *skb = NULL;
561         int size;
562         void *ptr;
563         int ret = -ENOMEM;
564
565         if (wl->bss_type == BSS_TYPE_IBSS) {
566                 size = sizeof(struct wl12xx_null_data_template);
567                 ptr = NULL;
568         } else {
569                 skb = ieee80211_nullfunc_get(wl->hw, wl->vif, false);
570                 if (!skb)
571                         goto out;
572                 size = skb->len;
573                 ptr = skb->data;
574         }
575
576         ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, ptr, size);
577
578 out:
579         dev_kfree_skb(skb);
580         if (ret)
581                 wl1251_warning("cmd buld null data failed: %d", ret);
582
583         return ret;
584 }
585
586 static int wl1251_build_qos_null_data(struct wl1251 *wl)
587 {
588         struct ieee80211_qos_hdr template;
589
590         memset(&template, 0, sizeof(template));
591
592         memcpy(template.addr1, wl->bssid, ETH_ALEN);
593         memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
594         memcpy(template.addr3, wl->bssid, ETH_ALEN);
595
596         template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
597                                              IEEE80211_STYPE_QOS_NULLFUNC |
598                                              IEEE80211_FCTL_TODS);
599
600         /* FIXME: not sure what priority to use here */
601         template.qos_ctrl = cpu_to_le16(0);
602
603         return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template,
604                                        sizeof(template));
605 }
606
607 static bool wl1251_can_do_pm(struct ieee80211_conf *conf, struct wl1251 *wl)
608 {
609         return (conf->flags & IEEE80211_CONF_PS) && !wl->monitor_present;
610 }
611
612 static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
613 {
614         struct wl1251 *wl = hw->priv;
615         struct ieee80211_conf *conf = &hw->conf;
616         int channel, ret = 0;
617
618         channel = ieee80211_frequency_to_channel(
619                         conf->chandef.chan->center_freq);
620
621         wl1251_debug(DEBUG_MAC80211,
622                      "mac80211 config ch %d monitor %s psm %s power %d",
623                      channel,
624                      conf->flags & IEEE80211_CONF_MONITOR ? "on" : "off",
625                      conf->flags & IEEE80211_CONF_PS ? "on" : "off",
626                      conf->power_level);
627
628         mutex_lock(&wl->mutex);
629
630         ret = wl1251_ps_elp_wakeup(wl);
631         if (ret < 0)
632                 goto out;
633
634         if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
635                 u32 mode;
636
637                 if (conf->flags & IEEE80211_CONF_MONITOR) {
638                         wl->monitor_present = true;
639                         mode = DF_SNIFF_MODE_ENABLE | DF_ENCRYPTION_DISABLE;
640                 } else {
641                         wl->monitor_present = false;
642                         mode = 0;
643                 }
644
645                 ret = wl1251_acx_feature_cfg(wl, mode);
646                 if (ret < 0)
647                         goto out_sleep;
648         }
649
650         if (channel != wl->channel) {
651                 wl->channel = channel;
652
653                 /*
654                  * Use ENABLE_RX command for channel switching when no
655                  * interface is present (monitor mode only).
656                  * This leaves the tx path disabled in firmware, whereas
657                  * the usual JOIN command seems to transmit some frames
658                  * at firmware level.
659                  */
660                 if (wl->vif == NULL) {
661                         wl->joined = false;
662                         ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
663                 } else {
664                         ret = wl1251_join(wl, wl->bss_type, wl->channel,
665                                           wl->beacon_int, wl->dtim_period);
666                 }
667                 if (ret < 0)
668                         goto out_sleep;
669         }
670
671         if (wl1251_can_do_pm(conf, wl) && !wl->psm_requested) {
672                 wl1251_debug(DEBUG_PSM, "psm enabled");
673
674                 wl->psm_requested = true;
675
676                 wl->dtim_period = conf->ps_dtim_period;
677
678                 ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
679                                                   wl->dtim_period);
680
681                 /*
682                  * mac80211 enables PSM only if we're already associated.
683                  */
684                 ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
685                 if (ret < 0)
686                         goto out_sleep;
687         } else if (!wl1251_can_do_pm(conf, wl) && wl->psm_requested) {
688                 wl1251_debug(DEBUG_PSM, "psm disabled");
689
690                 wl->psm_requested = false;
691
692                 if (wl->station_mode != STATION_ACTIVE_MODE) {
693                         ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
694                         if (ret < 0)
695                                 goto out_sleep;
696                 }
697         }
698
699         if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) {
700                 if (conf->flags & IEEE80211_CONF_IDLE) {
701                         ret = wl1251_ps_set_mode(wl, STATION_IDLE);
702                         if (ret < 0)
703                                 goto out_sleep;
704                 } else {
705                         ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
706                         if (ret < 0)
707                                 goto out_sleep;
708                         ret = wl1251_join(wl, wl->bss_type, wl->channel,
709                                           wl->beacon_int, wl->dtim_period);
710                         if (ret < 0)
711                                 goto out_sleep;
712                 }
713         }
714
715         if (conf->power_level != wl->power_level) {
716                 ret = wl1251_acx_tx_power(wl, conf->power_level);
717                 if (ret < 0)
718                         goto out_sleep;
719
720                 wl->power_level = conf->power_level;
721         }
722
723 out_sleep:
724         wl1251_ps_elp_sleep(wl);
725
726 out:
727         mutex_unlock(&wl->mutex);
728
729         return ret;
730 }
731
732 struct wl1251_filter_params {
733         bool enabled;
734         int mc_list_length;
735         u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
736 };
737
738 static u64 wl1251_op_prepare_multicast(struct ieee80211_hw *hw,
739                                        struct netdev_hw_addr_list *mc_list)
740 {
741         struct wl1251_filter_params *fp;
742         struct netdev_hw_addr *ha;
743         struct wl1251 *wl = hw->priv;
744
745         if (unlikely(wl->state == WL1251_STATE_OFF))
746                 return 0;
747
748         fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
749         if (!fp) {
750                 wl1251_error("Out of memory setting filters.");
751                 return 0;
752         }
753
754         /* update multicast filtering parameters */
755         fp->mc_list_length = 0;
756         if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) {
757                 fp->enabled = false;
758         } else {
759                 fp->enabled = true;
760                 netdev_hw_addr_list_for_each(ha, mc_list) {
761                         memcpy(fp->mc_list[fp->mc_list_length],
762                                         ha->addr, ETH_ALEN);
763                         fp->mc_list_length++;
764                 }
765         }
766
767         return (u64)(unsigned long)fp;
768 }
769
770 #define WL1251_SUPPORTED_FILTERS (FIF_ALLMULTI | \
771                                   FIF_FCSFAIL | \
772                                   FIF_BCN_PRBRESP_PROMISC | \
773                                   FIF_CONTROL | \
774                                   FIF_OTHER_BSS | \
775                                   FIF_PROBE_REQ)
776
777 static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
778                                        unsigned int changed,
779                                        unsigned int *total, u64 multicast)
780 {
781         struct wl1251_filter_params *fp = (void *)(unsigned long)multicast;
782         struct wl1251 *wl = hw->priv;
783         int ret;
784
785         wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
786
787         *total &= WL1251_SUPPORTED_FILTERS;
788         changed &= WL1251_SUPPORTED_FILTERS;
789
790         if (changed == 0) {
791                 /* no filters which we support changed */
792                 kfree(fp);
793                 return;
794         }
795
796         mutex_lock(&wl->mutex);
797
798         wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
799         wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
800
801         if (*total & FIF_ALLMULTI)
802                 /*
803                  * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
804                  * all multicast frames
805                  */
806                 wl->rx_config &= ~CFG_MC_FILTER_EN;
807         if (*total & FIF_FCSFAIL)
808                 wl->rx_filter |= CFG_RX_FCS_ERROR;
809         if (*total & FIF_BCN_PRBRESP_PROMISC) {
810                 wl->rx_config &= ~CFG_BSSID_FILTER_EN;
811                 wl->rx_config &= ~CFG_SSID_FILTER_EN;
812         }
813         if (*total & FIF_CONTROL)
814                 wl->rx_filter |= CFG_RX_CTL_EN;
815         if (*total & FIF_OTHER_BSS || is_zero_ether_addr(wl->bssid))
816                 wl->rx_config &= ~CFG_BSSID_FILTER_EN;
817         if (*total & FIF_PROBE_REQ)
818                 wl->rx_filter |= CFG_RX_PREQ_EN;
819
820         if (wl->state == WL1251_STATE_OFF)
821                 goto out;
822
823         ret = wl1251_ps_elp_wakeup(wl);
824         if (ret < 0)
825                 goto out;
826
827         if (*total & FIF_ALLMULTI)
828                 ret = wl1251_acx_group_address_tbl(wl, false, NULL, 0);
829         else if (fp)
830                 ret = wl1251_acx_group_address_tbl(wl, fp->enabled,
831                                                    fp->mc_list,
832                                                    fp->mc_list_length);
833         if (ret < 0)
834                 goto out;
835
836         /* send filters to firmware */
837         wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
838
839         wl1251_ps_elp_sleep(wl);
840
841 out:
842         mutex_unlock(&wl->mutex);
843         kfree(fp);
844 }
845
846 /* HW encryption */
847 static int wl1251_set_key_type(struct wl1251 *wl,
848                                struct wl1251_cmd_set_keys *key,
849                                enum set_key_cmd cmd,
850                                struct ieee80211_key_conf *mac80211_key,
851                                const u8 *addr)
852 {
853         switch (mac80211_key->cipher) {
854         case WLAN_CIPHER_SUITE_WEP40:
855         case WLAN_CIPHER_SUITE_WEP104:
856                 if (is_broadcast_ether_addr(addr))
857                         key->key_type = KEY_WEP_DEFAULT;
858                 else
859                         key->key_type = KEY_WEP_ADDR;
860
861                 mac80211_key->hw_key_idx = mac80211_key->keyidx;
862                 break;
863         case WLAN_CIPHER_SUITE_TKIP:
864                 if (is_broadcast_ether_addr(addr))
865                         key->key_type = KEY_TKIP_MIC_GROUP;
866                 else
867                         key->key_type = KEY_TKIP_MIC_PAIRWISE;
868
869                 mac80211_key->hw_key_idx = mac80211_key->keyidx;
870                 break;
871         case WLAN_CIPHER_SUITE_CCMP:
872                 if (is_broadcast_ether_addr(addr))
873                         key->key_type = KEY_AES_GROUP;
874                 else
875                         key->key_type = KEY_AES_PAIRWISE;
876                 mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
877                 break;
878         default:
879                 wl1251_error("Unknown key cipher 0x%x", mac80211_key->cipher);
880                 return -EOPNOTSUPP;
881         }
882
883         return 0;
884 }
885
886 static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
887                              struct ieee80211_vif *vif,
888                              struct ieee80211_sta *sta,
889                              struct ieee80211_key_conf *key)
890 {
891         struct wl1251 *wl = hw->priv;
892         struct wl1251_cmd_set_keys *wl_cmd;
893         const u8 *addr;
894         int ret;
895
896         static const u8 bcast_addr[ETH_ALEN] =
897                 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
898
899         wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
900
901         wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
902         if (!wl_cmd) {
903                 ret = -ENOMEM;
904                 goto out;
905         }
906
907         addr = sta ? sta->addr : bcast_addr;
908
909         wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
910         wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
911         wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
912                      key->cipher, key->keyidx, key->keylen, key->flags);
913         wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
914
915         if (is_zero_ether_addr(addr)) {
916                 /* We dont support TX only encryption */
917                 ret = -EOPNOTSUPP;
918                 goto out;
919         }
920
921         mutex_lock(&wl->mutex);
922
923         switch (cmd) {
924         case SET_KEY:
925                 if (wl->monitor_present) {
926                         ret = -EOPNOTSUPP;
927                         goto out_unlock;
928                 }
929                 wl_cmd->key_action = KEY_ADD_OR_REPLACE;
930                 break;
931         case DISABLE_KEY:
932                 wl_cmd->key_action = KEY_REMOVE;
933                 break;
934         default:
935                 wl1251_error("Unsupported key cmd 0x%x", cmd);
936                 break;
937         }
938
939         ret = wl1251_ps_elp_wakeup(wl);
940         if (ret < 0)
941                 goto out_unlock;
942
943         ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
944         if (ret < 0) {
945                 wl1251_error("Set KEY type failed");
946                 goto out_sleep;
947         }
948
949         if (wl_cmd->key_type != KEY_WEP_DEFAULT)
950                 memcpy(wl_cmd->addr, addr, ETH_ALEN);
951
952         if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
953             (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
954                 /*
955                  * We get the key in the following form:
956                  * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
957                  * but the target is expecting:
958                  * TKIP - RX MIC - TX MIC
959                  */
960                 memcpy(wl_cmd->key, key->key, 16);
961                 memcpy(wl_cmd->key + 16, key->key + 24, 8);
962                 memcpy(wl_cmd->key + 24, key->key + 16, 8);
963
964         } else {
965                 memcpy(wl_cmd->key, key->key, key->keylen);
966         }
967         wl_cmd->key_size = key->keylen;
968
969         wl_cmd->id = key->keyidx;
970         wl_cmd->ssid_profile = 0;
971
972         wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
973
974         ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
975         if (ret < 0) {
976                 wl1251_warning("could not set keys");
977                 goto out_sleep;
978         }
979
980 out_sleep:
981         wl1251_ps_elp_sleep(wl);
982
983 out_unlock:
984         mutex_unlock(&wl->mutex);
985
986 out:
987         kfree(wl_cmd);
988
989         return ret;
990 }
991
992 static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
993                              struct ieee80211_vif *vif,
994                              struct ieee80211_scan_request *hw_req)
995 {
996         struct cfg80211_scan_request *req = &hw_req->req;
997         struct wl1251 *wl = hw->priv;
998         struct sk_buff *skb;
999         size_t ssid_len = 0;
1000         u8 *ssid = NULL;
1001         int ret;
1002
1003         wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
1004
1005         if (req->n_ssids) {
1006                 ssid = req->ssids[0].ssid;
1007                 ssid_len = req->ssids[0].ssid_len;
1008         }
1009
1010         mutex_lock(&wl->mutex);
1011
1012         if (wl->scanning) {
1013                 wl1251_debug(DEBUG_SCAN, "scan already in progress");
1014                 ret = -EINVAL;
1015                 goto out;
1016         }
1017
1018         ret = wl1251_ps_elp_wakeup(wl);
1019         if (ret < 0)
1020                 goto out;
1021
1022         if (hw->conf.flags & IEEE80211_CONF_IDLE) {
1023                 ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
1024                 if (ret < 0)
1025                         goto out_sleep;
1026                 ret = wl1251_join(wl, wl->bss_type, wl->channel,
1027                                   wl->beacon_int, wl->dtim_period);
1028                 if (ret < 0)
1029                         goto out_sleep;
1030         }
1031
1032         skb = ieee80211_probereq_get(wl->hw, wl->vif->addr, ssid, ssid_len,
1033                                      req->ie_len);
1034         if (!skb) {
1035                 ret = -ENOMEM;
1036                 goto out_idle;
1037         }
1038         if (req->ie_len)
1039                 skb_put_data(skb, req->ie, req->ie_len);
1040
1041         ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
1042                                       skb->len);
1043         dev_kfree_skb(skb);
1044         if (ret < 0)
1045                 goto out_idle;
1046
1047         ret = wl1251_cmd_trigger_scan_to(wl, 0);
1048         if (ret < 0)
1049                 goto out_idle;
1050
1051         wl->scanning = true;
1052
1053         ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
1054                               req->n_channels, WL1251_SCAN_NUM_PROBES);
1055         if (ret < 0) {
1056                 wl1251_debug(DEBUG_SCAN, "scan failed %d", ret);
1057                 wl->scanning = false;
1058                 goto out_idle;
1059         }
1060         goto out_sleep;
1061
1062 out_idle:
1063         if (hw->conf.flags & IEEE80211_CONF_IDLE)
1064                 ret = wl1251_ps_set_mode(wl, STATION_IDLE);
1065 out_sleep:
1066         wl1251_ps_elp_sleep(wl);
1067
1068 out:
1069         mutex_unlock(&wl->mutex);
1070
1071         return ret;
1072 }
1073
1074 static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
1075 {
1076         struct wl1251 *wl = hw->priv;
1077         int ret;
1078
1079         mutex_lock(&wl->mutex);
1080
1081         ret = wl1251_ps_elp_wakeup(wl);
1082         if (ret < 0)
1083                 goto out;
1084
1085         ret = wl1251_acx_rts_threshold(wl, (u16) value);
1086         if (ret < 0)
1087                 wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
1088
1089         wl1251_ps_elp_sleep(wl);
1090
1091 out:
1092         mutex_unlock(&wl->mutex);
1093
1094         return ret;
1095 }
1096
1097 static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
1098                                        struct ieee80211_vif *vif,
1099                                        struct ieee80211_bss_conf *bss_conf,
1100                                        u32 changed)
1101 {
1102         struct wl1251 *wl = hw->priv;
1103         struct sk_buff *beacon, *skb;
1104         bool enable;
1105         int ret;
1106
1107         wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
1108
1109         mutex_lock(&wl->mutex);
1110
1111         ret = wl1251_ps_elp_wakeup(wl);
1112         if (ret < 0)
1113                 goto out;
1114
1115         if (changed & BSS_CHANGED_CQM) {
1116                 ret = wl1251_acx_low_rssi(wl, bss_conf->cqm_rssi_thold,
1117                                           WL1251_DEFAULT_LOW_RSSI_WEIGHT,
1118                                           WL1251_DEFAULT_LOW_RSSI_DEPTH,
1119                                           WL1251_ACX_LOW_RSSI_TYPE_EDGE);
1120                 if (ret < 0)
1121                         goto out;
1122                 wl->rssi_thold = bss_conf->cqm_rssi_thold;
1123         }
1124
1125         if ((changed & BSS_CHANGED_BSSID) &&
1126             memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
1127                 memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
1128
1129                 if (!is_zero_ether_addr(wl->bssid)) {
1130                         ret = wl1251_build_null_data(wl);
1131                         if (ret < 0)
1132                                 goto out_sleep;
1133
1134                         ret = wl1251_build_qos_null_data(wl);
1135                         if (ret < 0)
1136                                 goto out_sleep;
1137
1138                         ret = wl1251_join(wl, wl->bss_type, wl->channel,
1139                                           wl->beacon_int, wl->dtim_period);
1140                         if (ret < 0)
1141                                 goto out_sleep;
1142                 }
1143         }
1144
1145         if (changed & BSS_CHANGED_ASSOC) {
1146                 if (bss_conf->assoc) {
1147                         wl->beacon_int = bss_conf->beacon_int;
1148
1149                         skb = ieee80211_pspoll_get(wl->hw, wl->vif);
1150                         if (!skb)
1151                                 goto out_sleep;
1152
1153                         ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
1154                                                       skb->data,
1155                                                       skb->len);
1156                         dev_kfree_skb(skb);
1157                         if (ret < 0)
1158                                 goto out_sleep;
1159
1160                         ret = wl1251_acx_aid(wl, bss_conf->aid);
1161                         if (ret < 0)
1162                                 goto out_sleep;
1163                 } else {
1164                         /* use defaults when not associated */
1165                         wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
1166                         wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1167                 }
1168         }
1169         if (changed & BSS_CHANGED_ERP_SLOT) {
1170                 if (bss_conf->use_short_slot)
1171                         ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
1172                 else
1173                         ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
1174                 if (ret < 0) {
1175                         wl1251_warning("Set slot time failed %d", ret);
1176                         goto out_sleep;
1177                 }
1178         }
1179
1180         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1181                 if (bss_conf->use_short_preamble)
1182                         wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
1183                 else
1184                         wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
1185         }
1186
1187         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1188                 if (bss_conf->use_cts_prot)
1189                         ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
1190                 else
1191                         ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
1192                 if (ret < 0) {
1193                         wl1251_warning("Set ctsprotect failed %d", ret);
1194                         goto out_sleep;
1195                 }
1196         }
1197
1198         if (changed & BSS_CHANGED_ARP_FILTER) {
1199                 __be32 addr = bss_conf->arp_addr_list[0];
1200                 WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
1201
1202                 enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
1203                 wl1251_acx_arp_ip_filter(wl, enable, addr);
1204
1205                 if (ret < 0)
1206                         goto out_sleep;
1207         }
1208
1209         if (changed & BSS_CHANGED_BEACON) {
1210                 beacon = ieee80211_beacon_get(hw, vif);
1211                 if (!beacon)
1212                         goto out_sleep;
1213
1214                 ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
1215                                               beacon->len);
1216
1217                 if (ret < 0) {
1218                         dev_kfree_skb(beacon);
1219                         goto out_sleep;
1220                 }
1221
1222                 ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
1223                                               beacon->len);
1224
1225                 dev_kfree_skb(beacon);
1226
1227                 if (ret < 0)
1228                         goto out_sleep;
1229
1230                 ret = wl1251_join(wl, wl->bss_type, wl->channel,
1231                                   wl->beacon_int, wl->dtim_period);
1232
1233                 if (ret < 0)
1234                         goto out_sleep;
1235         }
1236
1237 out_sleep:
1238         wl1251_ps_elp_sleep(wl);
1239
1240 out:
1241         mutex_unlock(&wl->mutex);
1242 }
1243
1244
1245 /* can't be const, mac80211 writes to this */
1246 static struct ieee80211_rate wl1251_rates[] = {
1247         { .bitrate = 10,
1248           .hw_value = 0x1,
1249           .hw_value_short = 0x1, },
1250         { .bitrate = 20,
1251           .hw_value = 0x2,
1252           .hw_value_short = 0x2,
1253           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1254         { .bitrate = 55,
1255           .hw_value = 0x4,
1256           .hw_value_short = 0x4,
1257           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1258         { .bitrate = 110,
1259           .hw_value = 0x20,
1260           .hw_value_short = 0x20,
1261           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1262         { .bitrate = 60,
1263           .hw_value = 0x8,
1264           .hw_value_short = 0x8, },
1265         { .bitrate = 90,
1266           .hw_value = 0x10,
1267           .hw_value_short = 0x10, },
1268         { .bitrate = 120,
1269           .hw_value = 0x40,
1270           .hw_value_short = 0x40, },
1271         { .bitrate = 180,
1272           .hw_value = 0x80,
1273           .hw_value_short = 0x80, },
1274         { .bitrate = 240,
1275           .hw_value = 0x200,
1276           .hw_value_short = 0x200, },
1277         { .bitrate = 360,
1278          .hw_value = 0x400,
1279          .hw_value_short = 0x400, },
1280         { .bitrate = 480,
1281           .hw_value = 0x800,
1282           .hw_value_short = 0x800, },
1283         { .bitrate = 540,
1284           .hw_value = 0x1000,
1285           .hw_value_short = 0x1000, },
1286 };
1287
1288 /* can't be const, mac80211 writes to this */
1289 static struct ieee80211_channel wl1251_channels[] = {
1290         { .hw_value = 1, .center_freq = 2412},
1291         { .hw_value = 2, .center_freq = 2417},
1292         { .hw_value = 3, .center_freq = 2422},
1293         { .hw_value = 4, .center_freq = 2427},
1294         { .hw_value = 5, .center_freq = 2432},
1295         { .hw_value = 6, .center_freq = 2437},
1296         { .hw_value = 7, .center_freq = 2442},
1297         { .hw_value = 8, .center_freq = 2447},
1298         { .hw_value = 9, .center_freq = 2452},
1299         { .hw_value = 10, .center_freq = 2457},
1300         { .hw_value = 11, .center_freq = 2462},
1301         { .hw_value = 12, .center_freq = 2467},
1302         { .hw_value = 13, .center_freq = 2472},
1303 };
1304
1305 static int wl1251_op_conf_tx(struct ieee80211_hw *hw,
1306                              struct ieee80211_vif *vif, u16 queue,
1307                              const struct ieee80211_tx_queue_params *params)
1308 {
1309         enum wl1251_acx_ps_scheme ps_scheme;
1310         struct wl1251 *wl = hw->priv;
1311         int ret;
1312
1313         mutex_lock(&wl->mutex);
1314
1315         wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
1316
1317         ret = wl1251_ps_elp_wakeup(wl);
1318         if (ret < 0)
1319                 goto out;
1320
1321         /* mac80211 uses units of 32 usec */
1322         ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
1323                                 params->cw_min, params->cw_max,
1324                                 params->aifs, params->txop * 32);
1325         if (ret < 0)
1326                 goto out_sleep;
1327
1328         if (params->uapsd)
1329                 ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER;
1330         else
1331                 ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY;
1332
1333         ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
1334                                  CHANNEL_TYPE_EDCF,
1335                                  wl1251_tx_get_queue(queue), ps_scheme,
1336                                  WL1251_ACX_ACK_POLICY_LEGACY);
1337         if (ret < 0)
1338                 goto out_sleep;
1339
1340 out_sleep:
1341         wl1251_ps_elp_sleep(wl);
1342
1343 out:
1344         mutex_unlock(&wl->mutex);
1345
1346         return ret;
1347 }
1348
1349 static int wl1251_op_get_survey(struct ieee80211_hw *hw, int idx,
1350                                 struct survey_info *survey)
1351 {
1352         struct wl1251 *wl = hw->priv;
1353         struct ieee80211_conf *conf = &hw->conf;
1354  
1355         if (idx != 0)
1356                 return -ENOENT;
1357  
1358         survey->channel = conf->chandef.chan;
1359         survey->filled = SURVEY_INFO_NOISE_DBM;
1360         survey->noise = wl->noise;
1361  
1362         return 0;
1363 }
1364
1365 /* can't be const, mac80211 writes to this */
1366 static struct ieee80211_supported_band wl1251_band_2ghz = {
1367         .channels = wl1251_channels,
1368         .n_channels = ARRAY_SIZE(wl1251_channels),
1369         .bitrates = wl1251_rates,
1370         .n_bitrates = ARRAY_SIZE(wl1251_rates),
1371 };
1372
1373 static const struct ieee80211_ops wl1251_ops = {
1374         .start = wl1251_op_start,
1375         .stop = wl1251_op_stop,
1376         .add_interface = wl1251_op_add_interface,
1377         .remove_interface = wl1251_op_remove_interface,
1378         .config = wl1251_op_config,
1379         .prepare_multicast = wl1251_op_prepare_multicast,
1380         .configure_filter = wl1251_op_configure_filter,
1381         .tx = wl1251_op_tx,
1382         .set_key = wl1251_op_set_key,
1383         .hw_scan = wl1251_op_hw_scan,
1384         .bss_info_changed = wl1251_op_bss_info_changed,
1385         .set_rts_threshold = wl1251_op_set_rts_threshold,
1386         .conf_tx = wl1251_op_conf_tx,
1387         .get_survey = wl1251_op_get_survey,
1388 };
1389
1390 static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data)
1391 {
1392         unsigned long timeout;
1393
1394         wl1251_reg_write32(wl, EE_ADDR, offset);
1395         wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ);
1396
1397         /* EE_CTL_READ clears when data is ready */
1398         timeout = jiffies + msecs_to_jiffies(100);
1399         while (1) {
1400                 if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ))
1401                         break;
1402
1403                 if (time_after(jiffies, timeout))
1404                         return -ETIMEDOUT;
1405
1406                 msleep(1);
1407         }
1408
1409         *data = wl1251_reg_read32(wl, EE_DATA);
1410         return 0;
1411 }
1412
1413 static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset,
1414                               u8 *data, size_t len)
1415 {
1416         size_t i;
1417         int ret;
1418
1419         wl1251_reg_write32(wl, EE_START, 0);
1420
1421         for (i = 0; i < len; i++) {
1422                 ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]);
1423                 if (ret < 0)
1424                         return ret;
1425         }
1426
1427         return 0;
1428 }
1429
1430 static int wl1251_read_eeprom_mac(struct wl1251 *wl)
1431 {
1432         u8 mac[ETH_ALEN];
1433         int i, ret;
1434
1435         wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE);
1436
1437         ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac));
1438         if (ret < 0) {
1439                 wl1251_warning("failed to read MAC address from EEPROM");
1440                 return ret;
1441         }
1442
1443         /* MAC is stored in reverse order */
1444         for (i = 0; i < ETH_ALEN; i++)
1445                 wl->mac_addr[i] = mac[ETH_ALEN - i - 1];
1446
1447         return 0;
1448 }
1449
1450 static int wl1251_register_hw(struct wl1251 *wl)
1451 {
1452         int ret;
1453
1454         if (wl->mac80211_registered)
1455                 return 0;
1456
1457         SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
1458
1459         ret = ieee80211_register_hw(wl->hw);
1460         if (ret < 0) {
1461                 wl1251_error("unable to register mac80211 hw: %d", ret);
1462                 return ret;
1463         }
1464
1465         wl->mac80211_registered = true;
1466
1467         wl1251_notice("loaded");
1468
1469         return 0;
1470 }
1471
1472 int wl1251_init_ieee80211(struct wl1251 *wl)
1473 {
1474         int ret;
1475
1476         /* The tx descriptor buffer and the TKIP space */
1477         wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
1478                 + WL1251_TKIP_IV_SPACE;
1479
1480         /* unit us */
1481         /* FIXME: find a proper value */
1482
1483         ieee80211_hw_set(wl->hw, SIGNAL_DBM);
1484         ieee80211_hw_set(wl->hw, SUPPORTS_PS);
1485
1486         wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1487                                          BIT(NL80211_IFTYPE_ADHOC);
1488         wl->hw->wiphy->max_scan_ssids = 1;
1489         wl->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wl1251_band_2ghz;
1490
1491         wl->hw->queues = 4;
1492
1493         if (wl->use_eeprom)
1494                 wl1251_read_eeprom_mac(wl);
1495
1496         ret = wl1251_register_hw(wl);
1497         if (ret)
1498                 goto out;
1499
1500         wl1251_debugfs_init(wl);
1501         wl1251_notice("initialized");
1502
1503         ret = 0;
1504
1505 out:
1506         return ret;
1507 }
1508 EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
1509
1510 struct ieee80211_hw *wl1251_alloc_hw(void)
1511 {
1512         struct ieee80211_hw *hw;
1513         struct wl1251 *wl;
1514         int i;
1515         static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
1516
1517         hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
1518         if (!hw) {
1519                 wl1251_error("could not alloc ieee80211_hw");
1520                 return ERR_PTR(-ENOMEM);
1521         }
1522
1523         wl = hw->priv;
1524         memset(wl, 0, sizeof(*wl));
1525
1526         wl->hw = hw;
1527
1528         wl->data_in_count = 0;
1529
1530         skb_queue_head_init(&wl->tx_queue);
1531
1532         INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
1533         wl->channel = WL1251_DEFAULT_CHANNEL;
1534         wl->monitor_present = false;
1535         wl->joined = false;
1536         wl->scanning = false;
1537         wl->bss_type = MAX_BSS_TYPE;
1538         wl->default_key = 0;
1539         wl->listen_int = 1;
1540         wl->rx_counter = 0;
1541         wl->rx_handled = 0;
1542         wl->rx_current_buffer = 0;
1543         wl->rx_last_id = 0;
1544         wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
1545         wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
1546         wl->elp = false;
1547         wl->station_mode = STATION_ACTIVE_MODE;
1548         wl->psm_requested = false;
1549         wl->psm_entry_retry = 0;
1550         wl->tx_queue_stopped = false;
1551         wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
1552         wl->rssi_thold = 0;
1553         wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
1554         wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1555         wl->vif = NULL;
1556
1557         for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
1558                 wl->tx_frames[i] = NULL;
1559
1560         wl->next_tx_complete = 0;
1561
1562         INIT_WORK(&wl->irq_work, wl1251_irq_work);
1563         INIT_WORK(&wl->tx_work, wl1251_tx_work);
1564
1565         /*
1566          * In case our MAC address is not correctly set,
1567          * we use a random but Nokia MAC.
1568          */
1569         memcpy(wl->mac_addr, nokia_oui, 3);
1570         get_random_bytes(wl->mac_addr + 3, 3);
1571
1572         wl->state = WL1251_STATE_OFF;
1573         mutex_init(&wl->mutex);
1574         spin_lock_init(&wl->wl_lock);
1575
1576         wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
1577         wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
1578
1579         wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
1580         if (!wl->rx_descriptor) {
1581                 wl1251_error("could not allocate memory for rx descriptor");
1582                 ieee80211_free_hw(hw);
1583                 return ERR_PTR(-ENOMEM);
1584         }
1585
1586         return hw;
1587 }
1588 EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
1589
1590 int wl1251_free_hw(struct wl1251 *wl)
1591 {
1592         ieee80211_unregister_hw(wl->hw);
1593
1594         wl1251_debugfs_exit(wl);
1595
1596         kfree(wl->target_mem_map);
1597         kfree(wl->data_path);
1598         vfree(wl->fw);
1599         wl->fw = NULL;
1600         kfree(wl->nvs);
1601         wl->nvs = NULL;
1602
1603         kfree(wl->rx_descriptor);
1604         wl->rx_descriptor = NULL;
1605
1606         ieee80211_free_hw(wl->hw);
1607
1608         return 0;
1609 }
1610 EXPORT_SYMBOL_GPL(wl1251_free_hw);
1611
1612 MODULE_DESCRIPTION("TI wl1251 Wireless LAN Driver Core");
1613 MODULE_LICENSE("GPL");
1614 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
1615 MODULE_FIRMWARE(WL1251_FW_NAME);
1616 MODULE_FIRMWARE(WL1251_NVS_NAME);