Merge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[sfrench/cifs-2.6.git] / drivers / net / usb / qmi_wwan.c
1 /*
2  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
3  *
4  * The probing code is heavily inspired by cdc_ether, which is:
5  * Copyright (C) 2003-2005 by David Brownell
6  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  */
12
13 #include <linux/module.h>
14 #include <linux/netdevice.h>
15 #include <linux/ethtool.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_arp.h>
18 #include <linux/mii.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/usb.h>
21 #include <linux/usb/cdc.h>
22 #include <linux/usb/usbnet.h>
23 #include <linux/usb/cdc-wdm.h>
24
25 /* This driver supports wwan (3G/LTE/?) devices using a vendor
26  * specific management protocol called Qualcomm MSM Interface (QMI) -
27  * in addition to the more common AT commands over serial interface
28  * management
29  *
30  * QMI is wrapped in CDC, using CDC encapsulated commands on the
31  * control ("master") interface of a two-interface CDC Union
32  * resembling standard CDC ECM.  The devices do not use the control
33  * interface for any other CDC messages.  Most likely because the
34  * management protocol is used in place of the standard CDC
35  * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
36  *
37  * Alternatively, control and data functions can be combined in a
38  * single USB interface.
39  *
40  * Handling a protocol like QMI is out of the scope for any driver.
41  * It is exported as a character device using the cdc-wdm driver as
42  * a subdriver, enabling userspace applications ("modem managers") to
43  * handle it.
44  *
45  * These devices may alternatively/additionally be configured using AT
46  * commands on a serial interface
47  */
48
49 /* driver specific data */
50 struct qmi_wwan_state {
51         struct usb_driver *subdriver;
52         atomic_t pmcount;
53         unsigned long flags;
54         struct usb_interface *control;
55         struct usb_interface *data;
56 };
57
58 enum qmi_wwan_flags {
59         QMI_WWAN_FLAG_RAWIP = 1 << 0,
60 };
61
62 enum qmi_wwan_quirks {
63         QMI_WWAN_QUIRK_DTR = 1 << 0,    /* needs "set DTR" request */
64 };
65
66 static void qmi_wwan_netdev_setup(struct net_device *net)
67 {
68         struct usbnet *dev = netdev_priv(net);
69         struct qmi_wwan_state *info = (void *)&dev->data;
70
71         if (info->flags & QMI_WWAN_FLAG_RAWIP) {
72                 net->header_ops      = NULL;  /* No header */
73                 net->type            = ARPHRD_NONE;
74                 net->hard_header_len = 0;
75                 net->addr_len        = 0;
76                 net->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
77                 netdev_dbg(net, "mode: raw IP\n");
78         } else if (!net->header_ops) { /* don't bother if already set */
79                 ether_setup(net);
80                 netdev_dbg(net, "mode: Ethernet\n");
81         }
82
83         /* recalculate buffers after changing hard_header_len */
84         usbnet_change_mtu(net, net->mtu);
85 }
86
87 static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
88 {
89         struct usbnet *dev = netdev_priv(to_net_dev(d));
90         struct qmi_wwan_state *info = (void *)&dev->data;
91
92         return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
93 }
94
95 static ssize_t raw_ip_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
96 {
97         struct usbnet *dev = netdev_priv(to_net_dev(d));
98         struct qmi_wwan_state *info = (void *)&dev->data;
99         bool enable;
100         int ret;
101
102         if (strtobool(buf, &enable))
103                 return -EINVAL;
104
105         /* no change? */
106         if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
107                 return len;
108
109         if (!rtnl_trylock())
110                 return restart_syscall();
111
112         /* we don't want to modify a running netdev */
113         if (netif_running(dev->net)) {
114                 netdev_err(dev->net, "Cannot change a running device\n");
115                 ret = -EBUSY;
116                 goto err;
117         }
118
119         /* let other drivers deny the change */
120         ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
121         ret = notifier_to_errno(ret);
122         if (ret) {
123                 netdev_err(dev->net, "Type change was refused\n");
124                 goto err;
125         }
126
127         if (enable)
128                 info->flags |= QMI_WWAN_FLAG_RAWIP;
129         else
130                 info->flags &= ~QMI_WWAN_FLAG_RAWIP;
131         qmi_wwan_netdev_setup(dev->net);
132         call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
133         ret = len;
134 err:
135         rtnl_unlock();
136         return ret;
137 }
138
139 static DEVICE_ATTR_RW(raw_ip);
140
141 static struct attribute *qmi_wwan_sysfs_attrs[] = {
142         &dev_attr_raw_ip.attr,
143         NULL,
144 };
145
146 static struct attribute_group qmi_wwan_sysfs_attr_group = {
147         .name = "qmi",
148         .attrs = qmi_wwan_sysfs_attrs,
149 };
150
151 /* default ethernet address used by the modem */
152 static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
153
154 static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
155
156 /* Make up an ethernet header if the packet doesn't have one.
157  *
158  * A firmware bug common among several devices cause them to send raw
159  * IP packets under some circumstances.  There is no way for the
160  * driver/host to know when this will happen.  And even when the bug
161  * hits, some packets will still arrive with an intact header.
162  *
163  * The supported devices are only capably of sending IPv4, IPv6 and
164  * ARP packets on a point-to-point link. Any packet with an ethernet
165  * header will have either our address or a broadcast/multicast
166  * address as destination.  ARP packets will always have a header.
167  *
168  * This means that this function will reliably add the appropriate
169  * header iff necessary, provided our hardware address does not start
170  * with 4 or 6.
171  *
172  * Another common firmware bug results in all packets being addressed
173  * to 00:a0:c6:00:00:00 despite the host address being different.
174  * This function will also fixup such packets.
175  */
176 static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
177 {
178         struct qmi_wwan_state *info = (void *)&dev->data;
179         bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
180         __be16 proto;
181
182         /* This check is no longer done by usbnet */
183         if (skb->len < dev->net->hard_header_len)
184                 return 0;
185
186         switch (skb->data[0] & 0xf0) {
187         case 0x40:
188                 proto = htons(ETH_P_IP);
189                 break;
190         case 0x60:
191                 proto = htons(ETH_P_IPV6);
192                 break;
193         case 0x00:
194                 if (rawip)
195                         return 0;
196                 if (is_multicast_ether_addr(skb->data))
197                         return 1;
198                 /* possibly bogus destination - rewrite just in case */
199                 skb_reset_mac_header(skb);
200                 goto fix_dest;
201         default:
202                 if (rawip)
203                         return 0;
204                 /* pass along other packets without modifications */
205                 return 1;
206         }
207         if (rawip) {
208                 skb->dev = dev->net; /* normally set by eth_type_trans */
209                 skb->protocol = proto;
210                 return 1;
211         }
212
213         if (skb_headroom(skb) < ETH_HLEN)
214                 return 0;
215         skb_push(skb, ETH_HLEN);
216         skb_reset_mac_header(skb);
217         eth_hdr(skb)->h_proto = proto;
218         eth_zero_addr(eth_hdr(skb)->h_source);
219 fix_dest:
220         memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
221         return 1;
222 }
223
224 /* very simplistic detection of IPv4 or IPv6 headers */
225 static bool possibly_iphdr(const char *data)
226 {
227         return (data[0] & 0xd0) == 0x40;
228 }
229
230 /* disallow addresses which may be confused with IP headers */
231 static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
232 {
233         int ret;
234         struct sockaddr *addr = p;
235
236         ret = eth_prepare_mac_addr_change(dev, p);
237         if (ret < 0)
238                 return ret;
239         if (possibly_iphdr(addr->sa_data))
240                 return -EADDRNOTAVAIL;
241         eth_commit_mac_addr_change(dev, p);
242         return 0;
243 }
244
245 static const struct net_device_ops qmi_wwan_netdev_ops = {
246         .ndo_open               = usbnet_open,
247         .ndo_stop               = usbnet_stop,
248         .ndo_start_xmit         = usbnet_start_xmit,
249         .ndo_tx_timeout         = usbnet_tx_timeout,
250         .ndo_change_mtu         = usbnet_change_mtu,
251         .ndo_set_mac_address    = qmi_wwan_mac_addr,
252         .ndo_validate_addr      = eth_validate_addr,
253 };
254
255 /* using a counter to merge subdriver requests with our own into a
256  * combined state
257  */
258 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
259 {
260         struct qmi_wwan_state *info = (void *)&dev->data;
261         int rv;
262
263         dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
264                 atomic_read(&info->pmcount), on);
265
266         if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
267             (!on && atomic_dec_and_test(&info->pmcount))) {
268                 /* need autopm_get/put here to ensure the usbcore sees
269                  * the new value
270                  */
271                 rv = usb_autopm_get_interface(dev->intf);
272                 dev->intf->needs_remote_wakeup = on;
273                 if (!rv)
274                         usb_autopm_put_interface(dev->intf);
275         }
276         return 0;
277 }
278
279 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
280 {
281         struct usbnet *dev = usb_get_intfdata(intf);
282
283         /* can be called while disconnecting */
284         if (!dev)
285                 return 0;
286         return qmi_wwan_manage_power(dev, on);
287 }
288
289 /* collect all three endpoints and register subdriver */
290 static int qmi_wwan_register_subdriver(struct usbnet *dev)
291 {
292         int rv;
293         struct usb_driver *subdriver = NULL;
294         struct qmi_wwan_state *info = (void *)&dev->data;
295
296         /* collect bulk endpoints */
297         rv = usbnet_get_endpoints(dev, info->data);
298         if (rv < 0)
299                 goto err;
300
301         /* update status endpoint if separate control interface */
302         if (info->control != info->data)
303                 dev->status = &info->control->cur_altsetting->endpoint[0];
304
305         /* require interrupt endpoint for subdriver */
306         if (!dev->status) {
307                 rv = -EINVAL;
308                 goto err;
309         }
310
311         /* for subdriver power management */
312         atomic_set(&info->pmcount, 0);
313
314         /* register subdriver */
315         subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
316                                          4096, &qmi_wwan_cdc_wdm_manage_power);
317         if (IS_ERR(subdriver)) {
318                 dev_err(&info->control->dev, "subdriver registration failed\n");
319                 rv = PTR_ERR(subdriver);
320                 goto err;
321         }
322
323         /* prevent usbnet from using status endpoint */
324         dev->status = NULL;
325
326         /* save subdriver struct for suspend/resume wrappers */
327         info->subdriver = subdriver;
328
329 err:
330         return rv;
331 }
332
333 /* Send CDC SetControlLineState request, setting or clearing the DTR.
334  * "Required for Autoconnect and 9x30 to wake up" according to the
335  * GobiNet driver. The requirement has been verified on an MDM9230
336  * based Sierra Wireless MC7455
337  */
338 static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
339 {
340         u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
341
342         return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
343                                 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
344                                 on ? 0x01 : 0x00, intf, NULL, 0);
345 }
346
347 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
348 {
349         int status = -1;
350         u8 *buf = intf->cur_altsetting->extra;
351         int len = intf->cur_altsetting->extralen;
352         struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
353         struct usb_cdc_union_desc *cdc_union;
354         struct usb_cdc_ether_desc *cdc_ether;
355         struct usb_driver *driver = driver_of(intf);
356         struct qmi_wwan_state *info = (void *)&dev->data;
357         struct usb_cdc_parsed_header hdr;
358
359         BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
360                       sizeof(struct qmi_wwan_state)));
361
362         /* set up initial state */
363         info->control = intf;
364         info->data = intf;
365
366         /* and a number of CDC descriptors */
367         cdc_parse_cdc_header(&hdr, intf, buf, len);
368         cdc_union = hdr.usb_cdc_union_desc;
369         cdc_ether = hdr.usb_cdc_ether_desc;
370
371         /* Use separate control and data interfaces if we found a CDC Union */
372         if (cdc_union) {
373                 info->data = usb_ifnum_to_if(dev->udev,
374                                              cdc_union->bSlaveInterface0);
375                 if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
376                     !info->data) {
377                         dev_err(&intf->dev,
378                                 "bogus CDC Union: master=%u, slave=%u\n",
379                                 cdc_union->bMasterInterface0,
380                                 cdc_union->bSlaveInterface0);
381
382                         /* ignore and continue... */
383                         cdc_union = NULL;
384                         info->data = intf;
385                 }
386         }
387
388         /* errors aren't fatal - we can live with the dynamic address */
389         if (cdc_ether) {
390                 dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
391                 usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
392         }
393
394         /* claim data interface and set it up */
395         if (info->control != info->data) {
396                 status = usb_driver_claim_interface(driver, info->data, dev);
397                 if (status < 0)
398                         goto err;
399         }
400
401         status = qmi_wwan_register_subdriver(dev);
402         if (status < 0 && info->control != info->data) {
403                 usb_set_intfdata(info->data, NULL);
404                 usb_driver_release_interface(driver, info->data);
405         }
406
407         /* disabling remote wakeup on MDM9x30 devices has the same
408          * effect as clearing DTR. The device will not respond to QMI
409          * requests until we set DTR again.  This is similar to a
410          * QMI_CTL SYNC request, clearing a lot of firmware state
411          * including the client ID allocations.
412          *
413          * Our usage model allows a session to span multiple
414          * open/close events, so we must prevent the firmware from
415          * clearing out state the clients might need.
416          *
417          * MDM9x30 is the first QMI chipset with USB3 support. Abuse
418          * this fact to enable the quirk for all USB3 devices.
419          *
420          * There are also chipsets with the same "set DTR" requirement
421          * but without USB3 support.  Devices based on these chips
422          * need a quirk flag in the device ID table.
423          */
424         if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
425             le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
426                 qmi_wwan_manage_power(dev, 1);
427                 qmi_wwan_change_dtr(dev, true);
428         }
429
430         /* Never use the same address on both ends of the link, even if the
431          * buggy firmware told us to. Or, if device is assigned the well-known
432          * buggy firmware MAC address, replace it with a random address,
433          */
434         if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
435             ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
436                 eth_hw_addr_random(dev->net);
437
438         /* make MAC addr easily distinguishable from an IP header */
439         if (possibly_iphdr(dev->net->dev_addr)) {
440                 dev->net->dev_addr[0] |= 0x02;  /* set local assignment bit */
441                 dev->net->dev_addr[0] &= 0xbf;  /* clear "IP" bit */
442         }
443         dev->net->netdev_ops = &qmi_wwan_netdev_ops;
444         dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
445 err:
446         return status;
447 }
448
449 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
450 {
451         struct qmi_wwan_state *info = (void *)&dev->data;
452         struct usb_driver *driver = driver_of(intf);
453         struct usb_interface *other;
454
455         if (info->subdriver && info->subdriver->disconnect)
456                 info->subdriver->disconnect(info->control);
457
458         /* disable MDM9x30 quirk */
459         if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
460                 qmi_wwan_change_dtr(dev, false);
461                 qmi_wwan_manage_power(dev, 0);
462         }
463
464         /* allow user to unbind using either control or data */
465         if (intf == info->control)
466                 other = info->data;
467         else
468                 other = info->control;
469
470         /* only if not shared */
471         if (other && intf != other) {
472                 usb_set_intfdata(other, NULL);
473                 usb_driver_release_interface(driver, other);
474         }
475
476         info->subdriver = NULL;
477         info->data = NULL;
478         info->control = NULL;
479 }
480
481 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
482  * subdriver if present.
483  *
484  * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
485  * wrappers for those without adding usbnet reset support first.
486  */
487 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
488 {
489         struct usbnet *dev = usb_get_intfdata(intf);
490         struct qmi_wwan_state *info = (void *)&dev->data;
491         int ret;
492
493         /* Both usbnet_suspend() and subdriver->suspend() MUST return 0
494          * in system sleep context, otherwise, the resume callback has
495          * to recover device from previous suspend failure.
496          */
497         ret = usbnet_suspend(intf, message);
498         if (ret < 0)
499                 goto err;
500
501         if (intf == info->control && info->subdriver &&
502             info->subdriver->suspend)
503                 ret = info->subdriver->suspend(intf, message);
504         if (ret < 0)
505                 usbnet_resume(intf);
506 err:
507         return ret;
508 }
509
510 static int qmi_wwan_resume(struct usb_interface *intf)
511 {
512         struct usbnet *dev = usb_get_intfdata(intf);
513         struct qmi_wwan_state *info = (void *)&dev->data;
514         int ret = 0;
515         bool callsub = (intf == info->control && info->subdriver &&
516                         info->subdriver->resume);
517
518         if (callsub)
519                 ret = info->subdriver->resume(intf);
520         if (ret < 0)
521                 goto err;
522         ret = usbnet_resume(intf);
523         if (ret < 0 && callsub)
524                 info->subdriver->suspend(intf, PMSG_SUSPEND);
525 err:
526         return ret;
527 }
528
529 static const struct driver_info qmi_wwan_info = {
530         .description    = "WWAN/QMI device",
531         .flags          = FLAG_WWAN,
532         .bind           = qmi_wwan_bind,
533         .unbind         = qmi_wwan_unbind,
534         .manage_power   = qmi_wwan_manage_power,
535         .rx_fixup       = qmi_wwan_rx_fixup,
536 };
537
538 static const struct driver_info qmi_wwan_info_quirk_dtr = {
539         .description    = "WWAN/QMI device",
540         .flags          = FLAG_WWAN,
541         .bind           = qmi_wwan_bind,
542         .unbind         = qmi_wwan_unbind,
543         .manage_power   = qmi_wwan_manage_power,
544         .rx_fixup       = qmi_wwan_rx_fixup,
545         .data           = QMI_WWAN_QUIRK_DTR,
546 };
547
548 #define HUAWEI_VENDOR_ID        0x12D1
549
550 /* map QMI/wwan function by a fixed interface number */
551 #define QMI_FIXED_INTF(vend, prod, num) \
552         USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
553         .driver_info = (unsigned long)&qmi_wwan_info
554
555 /* devices requiring "set DTR" quirk */
556 #define QMI_QUIRK_SET_DTR(vend, prod, num) \
557         USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
558         .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
559
560 /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
561 #define QMI_GOBI1K_DEVICE(vend, prod) \
562         QMI_FIXED_INTF(vend, prod, 3)
563
564 /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
565 #define QMI_GOBI_DEVICE(vend, prod) \
566         QMI_FIXED_INTF(vend, prod, 0)
567
568 static const struct usb_device_id products[] = {
569         /* 1. CDC ECM like devices match on the control interface */
570         {       /* Huawei E392, E398 and possibly others sharing both device id and more... */
571                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
572                 .driver_info        = (unsigned long)&qmi_wwan_info,
573         },
574         {       /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
575                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
576                 .driver_info        = (unsigned long)&qmi_wwan_info,
577         },
578         {       /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
579                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
580                 .driver_info        = (unsigned long)&qmi_wwan_info,
581         },
582
583         /* 2. Combined interface devices matching on class+protocol */
584         {       /* Huawei E367 and possibly others in "Windows mode" */
585                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
586                 .driver_info        = (unsigned long)&qmi_wwan_info,
587         },
588         {       /* Huawei E392, E398 and possibly others in "Windows mode" */
589                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
590                 .driver_info        = (unsigned long)&qmi_wwan_info,
591         },
592         {       /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
593                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
594                 .driver_info        = (unsigned long)&qmi_wwan_info,
595         },
596         {       /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
597                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
598                 .driver_info        = (unsigned long)&qmi_wwan_info,
599         },
600         {       /* Pantech UML290, P4200 and more */
601                 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
602                 .driver_info        = (unsigned long)&qmi_wwan_info,
603         },
604         {       /* Pantech UML290 - newer firmware */
605                 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
606                 .driver_info        = (unsigned long)&qmi_wwan_info,
607         },
608         {       /* Novatel USB551L and MC551 */
609                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
610                                               USB_CLASS_COMM,
611                                               USB_CDC_SUBCLASS_ETHERNET,
612                                               USB_CDC_PROTO_NONE),
613                 .driver_info        = (unsigned long)&qmi_wwan_info,
614         },
615         {       /* Novatel E362 */
616                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
617                                               USB_CLASS_COMM,
618                                               USB_CDC_SUBCLASS_ETHERNET,
619                                               USB_CDC_PROTO_NONE),
620                 .driver_info        = (unsigned long)&qmi_wwan_info,
621         },
622         {       /* Novatel Expedite E371 */
623                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
624                                               USB_CLASS_COMM,
625                                               USB_CDC_SUBCLASS_ETHERNET,
626                                               USB_CDC_PROTO_NONE),
627                 .driver_info        = (unsigned long)&qmi_wwan_info,
628         },
629         {       /* Dell Wireless 5800 (Novatel E362) */
630                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
631                                               USB_CLASS_COMM,
632                                               USB_CDC_SUBCLASS_ETHERNET,
633                                               USB_CDC_PROTO_NONE),
634                 .driver_info        = (unsigned long)&qmi_wwan_info,
635         },
636         {       /* Dell Wireless 5800 V2 (Novatel E362) */
637                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
638                                               USB_CLASS_COMM,
639                                               USB_CDC_SUBCLASS_ETHERNET,
640                                               USB_CDC_PROTO_NONE),
641                 .driver_info        = (unsigned long)&qmi_wwan_info,
642         },
643         {       /* Dell Wireless 5804 (Novatel E371) */
644                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
645                                               USB_CLASS_COMM,
646                                               USB_CDC_SUBCLASS_ETHERNET,
647                                               USB_CDC_PROTO_NONE),
648                 .driver_info        = (unsigned long)&qmi_wwan_info,
649         },
650         {       /* ADU960S */
651                 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
652                                               USB_CLASS_COMM,
653                                               USB_CDC_SUBCLASS_ETHERNET,
654                                               USB_CDC_PROTO_NONE),
655                 .driver_info        = (unsigned long)&qmi_wwan_info,
656         },
657         {       /* HP lt2523 (Novatel E371) */
658                 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d,
659                                               USB_CLASS_COMM,
660                                               USB_CDC_SUBCLASS_ETHERNET,
661                                               USB_CDC_PROTO_NONE),
662                 .driver_info        = (unsigned long)&qmi_wwan_info,
663         },
664         {       /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
665                 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
666                 .driver_info = (unsigned long)&qmi_wwan_info,
667         },
668
669         /* 3. Combined interface devices matching on interface number */
670         {QMI_FIXED_INTF(0x0408, 0xea42, 4)},    /* Yota / Megafon M100-1 */
671         {QMI_FIXED_INTF(0x05c6, 0x6001, 3)},    /* 4G LTE usb-modem U901 */
672         {QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
673         {QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
674         {QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
675         {QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
676         {QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
677         {QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
678         {QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
679         {QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
680         {QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
681         {QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
682         {QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
683         {QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
684         {QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
685         {QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
686         {QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
687         {QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
688         {QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
689         {QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
690         {QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
691         {QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
692         {QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
693         {QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
694         {QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
695         {QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
696         {QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
697         {QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
698         {QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
699         {QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
700         {QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
701         {QMI_FIXED_INTF(0x05c6, 0x9025, 4)},    /* Alcatel-sbell ASB TL131 TDD LTE  (China Mobile) */
702         {QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
703         {QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
704         {QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
705         {QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
706         {QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
707         {QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
708         {QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
709         {QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
710         {QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
711         {QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
712         {QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
713         {QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
714         {QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
715         {QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
716         {QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
717         {QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
718         {QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
719         {QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
720         {QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
721         {QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
722         {QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
723         {QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
724         {QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
725         {QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
726         {QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
727         {QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
728         {QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
729         {QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
730         {QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
731         {QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
732         {QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
733         {QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
734         {QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
735         {QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
736         {QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
737         {QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
738         {QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
739         {QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
740         {QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
741         {QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
742         {QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
743         {QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
744         {QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
745         {QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
746         {QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
747         {QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
748         {QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
749         {QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
750         {QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
751         {QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
752         {QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
753         {QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
754         {QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
755         {QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
756         {QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
757         {QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
758         {QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
759         {QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
760         {QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
761         {QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
762         {QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
763         {QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
764         {QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
765         {QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
766         {QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
767         {QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
768         {QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
769         {QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
770         {QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
771         {QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
772         {QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
773         {QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
774         {QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
775         {QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
776         {QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
777         {QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
778         {QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
779         {QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
780         {QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
781         {QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
782         {QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
783         {QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
784         {QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
785         {QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
786         {QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
787         {QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
788         {QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
789         {QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
790         {QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
791         {QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
792         {QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
793         {QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
794         {QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
795         {QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
796         {QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
797         {QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
798         {QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
799         {QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
800         {QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
801         {QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
802         {QMI_FIXED_INTF(0x12d1, 0x140c, 1)},    /* Huawei E173 */
803         {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},    /* Huawei E1820 */
804         {QMI_FIXED_INTF(0x16d8, 0x6003, 0)},    /* CMOTech 6003 */
805         {QMI_FIXED_INTF(0x16d8, 0x6007, 0)},    /* CMOTech CHE-628S */
806         {QMI_FIXED_INTF(0x16d8, 0x6008, 0)},    /* CMOTech CMU-301 */
807         {QMI_FIXED_INTF(0x16d8, 0x6280, 0)},    /* CMOTech CHU-628 */
808         {QMI_FIXED_INTF(0x16d8, 0x7001, 0)},    /* CMOTech CHU-720S */
809         {QMI_FIXED_INTF(0x16d8, 0x7002, 0)},    /* CMOTech 7002 */
810         {QMI_FIXED_INTF(0x16d8, 0x7003, 4)},    /* CMOTech CHU-629K */
811         {QMI_FIXED_INTF(0x16d8, 0x7004, 3)},    /* CMOTech 7004 */
812         {QMI_FIXED_INTF(0x16d8, 0x7006, 5)},    /* CMOTech CGU-629 */
813         {QMI_FIXED_INTF(0x16d8, 0x700a, 4)},    /* CMOTech CHU-629S */
814         {QMI_FIXED_INTF(0x16d8, 0x7211, 0)},    /* CMOTech CHU-720I */
815         {QMI_FIXED_INTF(0x16d8, 0x7212, 0)},    /* CMOTech 7212 */
816         {QMI_FIXED_INTF(0x16d8, 0x7213, 0)},    /* CMOTech 7213 */
817         {QMI_FIXED_INTF(0x16d8, 0x7251, 1)},    /* CMOTech 7251 */
818         {QMI_FIXED_INTF(0x16d8, 0x7252, 1)},    /* CMOTech 7252 */
819         {QMI_FIXED_INTF(0x16d8, 0x7253, 1)},    /* CMOTech 7253 */
820         {QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
821         {QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
822         {QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
823         {QMI_FIXED_INTF(0x19d2, 0x0019, 3)},    /* ONDA MT689DC */
824         {QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
825         {QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
826         {QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
827         {QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
828         {QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
829         {QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
830         {QMI_FIXED_INTF(0x19d2, 0x0055, 1)},    /* ZTE (Vodafone) K3520-Z */
831         {QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
832         {QMI_FIXED_INTF(0x19d2, 0x0063, 4)},    /* ZTE (Vodafone) K3565-Z */
833         {QMI_FIXED_INTF(0x19d2, 0x0104, 4)},    /* ZTE (Vodafone) K4505-Z */
834         {QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
835         {QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
836         {QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
837         {QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
838         {QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
839         {QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
840         {QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
841         {QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
842         {QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
843         {QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
844         {QMI_FIXED_INTF(0x19d2, 0x0157, 5)},    /* ZTE MF683 */
845         {QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
846         {QMI_FIXED_INTF(0x19d2, 0x0167, 4)},    /* ZTE MF820D */
847         {QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
848         {QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
849         {QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
850         {QMI_FIXED_INTF(0x19d2, 0x0191, 4)},    /* ZTE EuFi890 */
851         {QMI_FIXED_INTF(0x19d2, 0x0199, 1)},    /* ZTE MF820S */
852         {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
853         {QMI_FIXED_INTF(0x19d2, 0x0257, 3)},    /* ZTE MF821 */
854         {QMI_FIXED_INTF(0x19d2, 0x0265, 4)},    /* ONDA MT8205 4G LTE */
855         {QMI_FIXED_INTF(0x19d2, 0x0284, 4)},    /* ZTE MF880 */
856         {QMI_FIXED_INTF(0x19d2, 0x0326, 4)},    /* ZTE MF821D */
857         {QMI_FIXED_INTF(0x19d2, 0x0412, 4)},    /* Telewell TW-LTE 4G */
858         {QMI_FIXED_INTF(0x19d2, 0x1008, 4)},    /* ZTE (Vodafone) K3570-Z */
859         {QMI_FIXED_INTF(0x19d2, 0x1010, 4)},    /* ZTE (Vodafone) K3571-Z */
860         {QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
861         {QMI_FIXED_INTF(0x19d2, 0x1018, 3)},    /* ZTE (Vodafone) K5006-Z */
862         {QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
863         {QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
864         {QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
865         {QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
866         {QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
867         {QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
868         {QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
869         {QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
870         {QMI_FIXED_INTF(0x19d2, 0x1270, 5)},    /* ZTE MF667 */
871         {QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
872         {QMI_FIXED_INTF(0x19d2, 0x1402, 2)},    /* ZTE MF60 */
873         {QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
874         {QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
875         {QMI_FIXED_INTF(0x19d2, 0x1426, 2)},    /* ZTE MF91 */
876         {QMI_FIXED_INTF(0x19d2, 0x1428, 2)},    /* Telewell TW-LTE 4G v2 */
877         {QMI_FIXED_INTF(0x19d2, 0x2002, 4)},    /* ZTE (Vodafone) K3765-Z */
878         {QMI_FIXED_INTF(0x2001, 0x7e19, 4)},    /* D-Link DWM-221 B1 */
879         {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
880         {QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
881         {QMI_FIXED_INTF(0x1199, 0x68a2, 8)},    /* Sierra Wireless MC7710 in QMI mode */
882         {QMI_FIXED_INTF(0x1199, 0x68a2, 19)},   /* Sierra Wireless MC7710 in QMI mode */
883         {QMI_FIXED_INTF(0x1199, 0x68c0, 8)},    /* Sierra Wireless MC7304/MC7354 */
884         {QMI_FIXED_INTF(0x1199, 0x68c0, 10)},   /* Sierra Wireless MC7304/MC7354 */
885         {QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
886         {QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
887         {QMI_FIXED_INTF(0x1199, 0x9041, 8)},    /* Sierra Wireless MC7305/MC7355 */
888         {QMI_FIXED_INTF(0x1199, 0x9041, 10)},   /* Sierra Wireless MC7305/MC7355 */
889         {QMI_FIXED_INTF(0x1199, 0x9051, 8)},    /* Netgear AirCard 340U */
890         {QMI_FIXED_INTF(0x1199, 0x9053, 8)},    /* Sierra Wireless Modem */
891         {QMI_FIXED_INTF(0x1199, 0x9054, 8)},    /* Sierra Wireless Modem */
892         {QMI_FIXED_INTF(0x1199, 0x9055, 8)},    /* Netgear AirCard 341U */
893         {QMI_FIXED_INTF(0x1199, 0x9056, 8)},    /* Sierra Wireless Modem */
894         {QMI_FIXED_INTF(0x1199, 0x9057, 8)},
895         {QMI_FIXED_INTF(0x1199, 0x9061, 8)},    /* Sierra Wireless Modem */
896         {QMI_FIXED_INTF(0x1199, 0x9071, 8)},    /* Sierra Wireless MC74xx */
897         {QMI_FIXED_INTF(0x1199, 0x9071, 10)},   /* Sierra Wireless MC74xx */
898         {QMI_FIXED_INTF(0x1199, 0x9079, 8)},    /* Sierra Wireless EM74xx */
899         {QMI_FIXED_INTF(0x1199, 0x9079, 10)},   /* Sierra Wireless EM74xx */
900         {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},    /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
901         {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)},    /* Alcatel L800MA */
902         {QMI_FIXED_INTF(0x2357, 0x0201, 4)},    /* TP-LINK HSUPA Modem MA180 */
903         {QMI_FIXED_INTF(0x2357, 0x9000, 4)},    /* TP-LINK MA260 */
904         {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */
905         {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},    /* Telit LE920 */
906         {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)},    /* Telit LE920 */
907         {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},    /* XS Stick W100-2 from 4G Systems */
908         {QMI_FIXED_INTF(0x0b3c, 0xc000, 4)},    /* Olivetti Olicard 100 */
909         {QMI_FIXED_INTF(0x0b3c, 0xc001, 4)},    /* Olivetti Olicard 120 */
910         {QMI_FIXED_INTF(0x0b3c, 0xc002, 4)},    /* Olivetti Olicard 140 */
911         {QMI_FIXED_INTF(0x0b3c, 0xc004, 6)},    /* Olivetti Olicard 155 */
912         {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)},    /* Olivetti Olicard 200 */
913         {QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)},    /* Olivetti Olicard 160 */
914         {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)},    /* Olivetti Olicard 500 */
915         {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},    /* Cinterion PLxx */
916         {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)},    /* Cinterion PHxx,PXxx */
917         {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},    /* Cinterion PHxx,PXxx (2 RmNet) */
918         {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},    /* Cinterion PHxx,PXxx (2 RmNet) */
919         {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},    /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
920         {QMI_FIXED_INTF(0x413c, 0x81a2, 8)},    /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
921         {QMI_FIXED_INTF(0x413c, 0x81a3, 8)},    /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
922         {QMI_FIXED_INTF(0x413c, 0x81a4, 8)},    /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
923         {QMI_FIXED_INTF(0x413c, 0x81a8, 8)},    /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
924         {QMI_FIXED_INTF(0x413c, 0x81a9, 8)},    /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
925         {QMI_FIXED_INTF(0x413c, 0x81b1, 8)},    /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
926         {QMI_FIXED_INTF(0x413c, 0x81b3, 8)},    /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
927         {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},    /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
928         {QMI_FIXED_INTF(0x22de, 0x9061, 3)},    /* WeTelecom WPD-600N */
929         {QMI_FIXED_INTF(0x1e0e, 0x9001, 5)},    /* SIMCom 7230E */
930         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0  Mini PCIe */
931         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */
932
933         /* 4. Gobi 1000 devices */
934         {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},    /* Acer Gobi Modem Device */
935         {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},    /* HP un2400 Gobi Modem Device */
936         {QMI_GOBI1K_DEVICE(0x04da, 0x250d)},    /* Panasonic Gobi Modem device */
937         {QMI_GOBI1K_DEVICE(0x413c, 0x8172)},    /* Dell Gobi Modem device */
938         {QMI_GOBI1K_DEVICE(0x1410, 0xa001)},    /* Novatel/Verizon USB-1000 */
939         {QMI_GOBI1K_DEVICE(0x1410, 0xa002)},    /* Novatel Gobi Modem device */
940         {QMI_GOBI1K_DEVICE(0x1410, 0xa003)},    /* Novatel Gobi Modem device */
941         {QMI_GOBI1K_DEVICE(0x1410, 0xa004)},    /* Novatel Gobi Modem device */
942         {QMI_GOBI1K_DEVICE(0x1410, 0xa005)},    /* Novatel Gobi Modem device */
943         {QMI_GOBI1K_DEVICE(0x1410, 0xa006)},    /* Novatel Gobi Modem device */
944         {QMI_GOBI1K_DEVICE(0x1410, 0xa007)},    /* Novatel Gobi Modem device */
945         {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},    /* Asus Gobi Modem device */
946         {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},    /* ONDA Gobi Modem device */
947         {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},    /* Generic Gobi Modem device */
948         {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},    /* Generic Gobi Modem device */
949         {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},    /* Generic Gobi Modem device */
950         {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},    /* Generic Gobi Modem device */
951         {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},    /* Generic Gobi Modem device */
952         {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},    /* Generic Gobi Modem device */
953
954         /* 5. Gobi 2000 and 3000 devices */
955         {QMI_GOBI_DEVICE(0x413c, 0x8186)},      /* Dell Gobi 2000 Modem device (N0218, VU936) */
956         {QMI_GOBI_DEVICE(0x413c, 0x8194)},      /* Dell Gobi 3000 Composite */
957         {QMI_GOBI_DEVICE(0x05c6, 0x920b)},      /* Generic Gobi 2000 Modem device */
958         {QMI_GOBI_DEVICE(0x05c6, 0x9225)},      /* Sony Gobi 2000 Modem device (N0279, VU730) */
959         {QMI_GOBI_DEVICE(0x05c6, 0x9245)},      /* Samsung Gobi 2000 Modem device (VL176) */
960         {QMI_GOBI_DEVICE(0x03f0, 0x251d)},      /* HP Gobi 2000 Modem device (VP412) */
961         {QMI_GOBI_DEVICE(0x05c6, 0x9215)},      /* Acer Gobi 2000 Modem device (VP413) */
962         {QMI_FIXED_INTF(0x05c6, 0x9215, 4)},    /* Quectel EC20 Mini PCIe */
963         {QMI_GOBI_DEVICE(0x05c6, 0x9265)},      /* Asus Gobi 2000 Modem device (VR305) */
964         {QMI_GOBI_DEVICE(0x05c6, 0x9235)},      /* Top Global Gobi 2000 Modem device (VR306) */
965         {QMI_GOBI_DEVICE(0x05c6, 0x9275)},      /* iRex Technologies Gobi 2000 Modem device (VR307) */
966         {QMI_GOBI_DEVICE(0x0af0, 0x8120)},      /* Option GTM681W */
967         {QMI_GOBI_DEVICE(0x1199, 0x68a5)},      /* Sierra Wireless Modem */
968         {QMI_GOBI_DEVICE(0x1199, 0x68a9)},      /* Sierra Wireless Modem */
969         {QMI_GOBI_DEVICE(0x1199, 0x9001)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
970         {QMI_GOBI_DEVICE(0x1199, 0x9002)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
971         {QMI_GOBI_DEVICE(0x1199, 0x9003)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
972         {QMI_GOBI_DEVICE(0x1199, 0x9004)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
973         {QMI_GOBI_DEVICE(0x1199, 0x9005)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
974         {QMI_GOBI_DEVICE(0x1199, 0x9006)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
975         {QMI_GOBI_DEVICE(0x1199, 0x9007)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
976         {QMI_GOBI_DEVICE(0x1199, 0x9008)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
977         {QMI_GOBI_DEVICE(0x1199, 0x9009)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
978         {QMI_GOBI_DEVICE(0x1199, 0x900a)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
979         {QMI_GOBI_DEVICE(0x1199, 0x9011)},      /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
980         {QMI_GOBI_DEVICE(0x16d8, 0x8002)},      /* CMDTech Gobi 2000 Modem device (VU922) */
981         {QMI_GOBI_DEVICE(0x05c6, 0x9205)},      /* Gobi 2000 Modem device */
982         {QMI_GOBI_DEVICE(0x1199, 0x9013)},      /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
983         {QMI_GOBI_DEVICE(0x03f0, 0x371d)},      /* HP un2430 Mobile Broadband Module */
984         {QMI_GOBI_DEVICE(0x1199, 0x9015)},      /* Sierra Wireless Gobi 3000 Modem device */
985         {QMI_GOBI_DEVICE(0x1199, 0x9019)},      /* Sierra Wireless Gobi 3000 Modem device */
986         {QMI_GOBI_DEVICE(0x1199, 0x901b)},      /* Sierra Wireless MC7770 */
987         {QMI_GOBI_DEVICE(0x12d1, 0x14f1)},      /* Sony Gobi 3000 Composite */
988         {QMI_GOBI_DEVICE(0x1410, 0xa021)},      /* Foxconn Gobi 3000 Modem device (Novatel E396) */
989
990         { }                                     /* END */
991 };
992 MODULE_DEVICE_TABLE(usb, products);
993
994 static bool quectel_ec20_detected(struct usb_interface *intf)
995 {
996         struct usb_device *dev = interface_to_usbdev(intf);
997
998         if (dev->actconfig &&
999             le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
1000             le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
1001             dev->actconfig->desc.bNumInterfaces == 5)
1002                 return true;
1003
1004         return false;
1005 }
1006
1007 static int qmi_wwan_probe(struct usb_interface *intf,
1008                           const struct usb_device_id *prod)
1009 {
1010         struct usb_device_id *id = (struct usb_device_id *)prod;
1011         struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
1012
1013         /* Workaround to enable dynamic IDs.  This disables usbnet
1014          * blacklisting functionality.  Which, if required, can be
1015          * reimplemented here by using a magic "blacklist" value
1016          * instead of 0 in the static device id table
1017          */
1018         if (!id->driver_info) {
1019                 dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
1020                 id->driver_info = (unsigned long)&qmi_wwan_info;
1021         }
1022
1023         /* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
1024         if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
1025                 dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
1026                 return -ENODEV;
1027         }
1028
1029         return usbnet_probe(intf, id);
1030 }
1031
1032 static struct usb_driver qmi_wwan_driver = {
1033         .name                 = "qmi_wwan",
1034         .id_table             = products,
1035         .probe                = qmi_wwan_probe,
1036         .disconnect           = usbnet_disconnect,
1037         .suspend              = qmi_wwan_suspend,
1038         .resume               = qmi_wwan_resume,
1039         .reset_resume         = qmi_wwan_resume,
1040         .supports_autosuspend = 1,
1041         .disable_hub_initiated_lpm = 1,
1042 };
1043
1044 module_usb_driver(qmi_wwan_driver);
1045
1046 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
1047 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
1048 MODULE_LICENSE("GPL");