Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bcm63xx', 'spi/fix/doc'...
[sfrench/cifs-2.6.git] / drivers / net / usb / cdc_ether.c
1 /*
2  * CDC Ethernet based networking peripherals
3  * Copyright (C) 2003-2005 by David Brownell
4  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, see <http://www.gnu.org/licenses/>.
18  */
19
20 // #define      DEBUG                   // error path messages, extra info
21 // #define      VERBOSE                 // more; success messages
22
23 #include <linux/module.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/usb.h>
30 #include <linux/usb/cdc.h>
31 #include <linux/usb/usbnet.h>
32
33
34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36 static int is_rndis(struct usb_interface_descriptor *desc)
37 {
38         return (desc->bInterfaceClass == USB_CLASS_COMM &&
39                 desc->bInterfaceSubClass == 2 &&
40                 desc->bInterfaceProtocol == 0xff);
41 }
42
43 static int is_activesync(struct usb_interface_descriptor *desc)
44 {
45         return (desc->bInterfaceClass == USB_CLASS_MISC &&
46                 desc->bInterfaceSubClass == 1 &&
47                 desc->bInterfaceProtocol == 1);
48 }
49
50 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51 {
52         return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53                 desc->bInterfaceSubClass == 1 &&
54                 desc->bInterfaceProtocol == 3);
55 }
56
57 #else
58
59 #define is_rndis(desc)          0
60 #define is_activesync(desc)     0
61 #define is_wireless_rndis(desc) 0
62
63 #endif
64
65 static const u8 mbm_guid[16] = {
66         0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67         0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68 };
69
70 static void usbnet_cdc_update_filter(struct usbnet *dev)
71 {
72         struct cdc_state        *info = (void *) &dev->data;
73         struct usb_interface    *intf = info->control;
74         struct net_device       *net = dev->net;
75
76         u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
77                         | USB_CDC_PACKET_TYPE_BROADCAST;
78
79         /* filtering on the device is an optional feature and not worth
80          * the hassle so we just roughly care about snooping and if any
81          * multicast is requested, we take every multicast
82          */
83         if (net->flags & IFF_PROMISC)
84                 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
85         if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
86                 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
87
88         usb_control_msg(dev->udev,
89                         usb_sndctrlpipe(dev->udev, 0),
90                         USB_CDC_SET_ETHERNET_PACKET_FILTER,
91                         USB_TYPE_CLASS | USB_RECIP_INTERFACE,
92                         cdc_filter,
93                         intf->cur_altsetting->desc.bInterfaceNumber,
94                         NULL,
95                         0,
96                         USB_CTRL_SET_TIMEOUT
97                 );
98 }
99
100 /* probes control interface, claims data interface, collects the bulk
101  * endpoints, activates data interface (if needed), maybe sets MTU.
102  * all pure cdc, except for certain firmware workarounds, and knowing
103  * that rndis uses one different rule.
104  */
105 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
106 {
107         u8                              *buf = intf->cur_altsetting->extra;
108         int                             len = intf->cur_altsetting->extralen;
109         struct usb_interface_descriptor *d;
110         struct cdc_state                *info = (void *) &dev->data;
111         int                             status;
112         int                             rndis;
113         bool                            android_rndis_quirk = false;
114         struct usb_driver               *driver = driver_of(intf);
115         struct usb_cdc_parsed_header header;
116
117         if (sizeof(dev->data) < sizeof(*info))
118                 return -EDOM;
119
120         /* expect strict spec conformance for the descriptors, but
121          * cope with firmware which stores them in the wrong place
122          */
123         if (len == 0 && dev->udev->actconfig->extralen) {
124                 /* Motorola SB4100 (and others: Brad Hards says it's
125                  * from a Broadcom design) put CDC descriptors here
126                  */
127                 buf = dev->udev->actconfig->extra;
128                 len = dev->udev->actconfig->extralen;
129                 dev_dbg(&intf->dev, "CDC descriptors on config\n");
130         }
131
132         /* Maybe CDC descriptors are after the endpoint?  This bug has
133          * been seen on some 2Wire Inc RNDIS-ish products.
134          */
135         if (len == 0) {
136                 struct usb_host_endpoint        *hep;
137
138                 hep = intf->cur_altsetting->endpoint;
139                 if (hep) {
140                         buf = hep->extra;
141                         len = hep->extralen;
142                 }
143                 if (len)
144                         dev_dbg(&intf->dev,
145                                 "CDC descriptors on endpoint\n");
146         }
147
148         /* this assumes that if there's a non-RNDIS vendor variant
149          * of cdc-acm, it'll fail RNDIS requests cleanly.
150          */
151         rndis = (is_rndis(&intf->cur_altsetting->desc) ||
152                  is_activesync(&intf->cur_altsetting->desc) ||
153                  is_wireless_rndis(&intf->cur_altsetting->desc));
154
155         memset(info, 0, sizeof(*info));
156         info->control = intf;
157
158         cdc_parse_cdc_header(&header, intf, buf, len);
159
160         info->u = header.usb_cdc_union_desc;
161         info->header = header.usb_cdc_header_desc;
162         info->ether = header.usb_cdc_ether_desc;
163         if (!info->u) {
164                 if (rndis)
165                         goto skip;
166                 else /* in that case a quirk is mandatory */
167                         goto bad_desc;
168         }
169         /* we need a master/control interface (what we're
170          * probed with) and a slave/data interface; union
171          * descriptors sort this all out.
172          */
173         info->control = usb_ifnum_to_if(dev->udev,
174         info->u->bMasterInterface0);
175         info->data = usb_ifnum_to_if(dev->udev,
176                 info->u->bSlaveInterface0);
177         if (!info->control || !info->data) {
178                 dev_dbg(&intf->dev,
179                         "master #%u/%p slave #%u/%p\n",
180                         info->u->bMasterInterface0,
181                         info->control,
182                         info->u->bSlaveInterface0,
183                         info->data);
184                 /* fall back to hard-wiring for RNDIS */
185                 if (rndis) {
186                         android_rndis_quirk = true;
187                         goto skip;
188                 }
189                 goto bad_desc;
190         }
191         if (info->control != intf) {
192                 dev_dbg(&intf->dev, "bogus CDC Union\n");
193                 /* Ambit USB Cable Modem (and maybe others)
194                  * interchanges master and slave interface.
195                  */
196                 if (info->data == intf) {
197                         info->data = info->control;
198                         info->control = intf;
199                 } else
200                         goto bad_desc;
201         }
202
203         /* some devices merge these - skip class check */
204         if (info->control == info->data)
205                 goto skip;
206
207         /* a data interface altsetting does the real i/o */
208         d = &info->data->cur_altsetting->desc;
209         if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
210                 dev_dbg(&intf->dev, "slave class %u\n",
211                         d->bInterfaceClass);
212                 goto bad_desc;
213         }
214 skip:
215         if (    rndis &&
216                 header.usb_cdc_acm_descriptor &&
217                 header.usb_cdc_acm_descriptor->bmCapabilities) {
218                         dev_dbg(&intf->dev,
219                                 "ACM capabilities %02x, not really RNDIS?\n",
220                                 header.usb_cdc_acm_descriptor->bmCapabilities);
221                         goto bad_desc;
222         }
223
224         if (header.usb_cdc_ether_desc) {
225                 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
226                 /* because of Zaurus, we may be ignoring the host
227                  * side link address we were given.
228                  */
229         }
230
231         if (header.usb_cdc_mdlm_desc &&
232                 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
233                 dev_dbg(&intf->dev, "GUID doesn't match\n");
234                 goto bad_desc;
235         }
236
237         if (header.usb_cdc_mdlm_detail_desc &&
238                 header.usb_cdc_mdlm_detail_desc->bLength <
239                         (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
240                 dev_dbg(&intf->dev, "Descriptor too short\n");
241                 goto bad_desc;
242         }
243
244
245
246         /* Microsoft ActiveSync based and some regular RNDIS devices lack the
247          * CDC descriptors, so we'll hard-wire the interfaces and not check
248          * for descriptors.
249          *
250          * Some Android RNDIS devices have a CDC Union descriptor pointing
251          * to non-existing interfaces.  Ignore that and attempt the same
252          * hard-wired 0 and 1 interfaces.
253          */
254         if (rndis && (!info->u || android_rndis_quirk)) {
255                 info->control = usb_ifnum_to_if(dev->udev, 0);
256                 info->data = usb_ifnum_to_if(dev->udev, 1);
257                 if (!info->control || !info->data || info->control != intf) {
258                         dev_dbg(&intf->dev,
259                                 "rndis: master #0/%p slave #1/%p\n",
260                                 info->control,
261                                 info->data);
262                         goto bad_desc;
263                 }
264
265         } else if (!info->header || (!rndis && !info->ether)) {
266                 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
267                         info->header ? "" : "header ",
268                         info->u ? "" : "union ",
269                         info->ether ? "" : "ether ");
270                 goto bad_desc;
271         }
272
273         /* claim data interface and set it up ... with side effects.
274          * network traffic can't flow until an altsetting is enabled.
275          */
276         if (info->data != info->control) {
277                 status = usb_driver_claim_interface(driver, info->data, dev);
278                 if (status < 0)
279                         return status;
280         }
281         status = usbnet_get_endpoints(dev, info->data);
282         if (status < 0) {
283                 /* ensure immediate exit from usbnet_disconnect */
284                 usb_set_intfdata(info->data, NULL);
285                 if (info->data != info->control)
286                         usb_driver_release_interface(driver, info->data);
287                 return status;
288         }
289
290         /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
291         if (info->data != info->control)
292                 dev->status = NULL;
293         if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
294                 struct usb_endpoint_descriptor  *desc;
295
296                 dev->status = &info->control->cur_altsetting->endpoint [0];
297                 desc = &dev->status->desc;
298                 if (!usb_endpoint_is_int_in(desc) ||
299                     (le16_to_cpu(desc->wMaxPacketSize)
300                      < sizeof(struct usb_cdc_notification)) ||
301                     !desc->bInterval) {
302                         dev_dbg(&intf->dev, "bad notification endpoint\n");
303                         dev->status = NULL;
304                 }
305         }
306         if (rndis && !dev->status) {
307                 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
308                 usb_set_intfdata(info->data, NULL);
309                 usb_driver_release_interface(driver, info->data);
310                 return -ENODEV;
311         }
312
313         return 0;
314
315 bad_desc:
316         dev_info(&dev->udev->dev, "bad CDC descriptors\n");
317         return -ENODEV;
318 }
319 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
320
321
322 /* like usbnet_generic_cdc_bind() but handles filter initialization
323  * correctly
324  */
325 int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
326 {
327         int rv;
328
329         rv = usbnet_generic_cdc_bind(dev, intf);
330         if (rv < 0)
331                 goto bail_out;
332
333         /* Some devices don't initialise properly. In particular
334          * the packet filter is not reset. There are devices that
335          * don't do reset all the way. So the packet filter should
336          * be set to a sane initial value.
337          */
338         usbnet_cdc_update_filter(dev);
339
340 bail_out:
341         return rv;
342 }
343 EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
344
345 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
346 {
347         struct cdc_state                *info = (void *) &dev->data;
348         struct usb_driver               *driver = driver_of(intf);
349
350         /* combined interface - nothing  to do */
351         if (info->data == info->control)
352                 return;
353
354         /* disconnect master --> disconnect slave */
355         if (intf == info->control && info->data) {
356                 /* ensure immediate exit from usbnet_disconnect */
357                 usb_set_intfdata(info->data, NULL);
358                 usb_driver_release_interface(driver, info->data);
359                 info->data = NULL;
360         }
361
362         /* and vice versa (just in case) */
363         else if (intf == info->data && info->control) {
364                 /* ensure immediate exit from usbnet_disconnect */
365                 usb_set_intfdata(info->control, NULL);
366                 usb_driver_release_interface(driver, info->control);
367                 info->control = NULL;
368         }
369 }
370 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
371
372 /* Communications Device Class, Ethernet Control model
373  *
374  * Takes two interfaces.  The DATA interface is inactive till an altsetting
375  * is selected.  Configuration data includes class descriptors.  There's
376  * an optional status endpoint on the control interface.
377  *
378  * This should interop with whatever the 2.4 "CDCEther.c" driver
379  * (by Brad Hards) talked with, with more functionality.
380  */
381
382 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
383 {
384         netif_info(dev, timer, dev->net,
385                    "link speeds: %u kbps up, %u kbps down\n",
386                    __le32_to_cpu(speeds[0]) / 1000,
387                    __le32_to_cpu(speeds[1]) / 1000);
388 }
389
390 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
391 {
392         struct usb_cdc_notification     *event;
393
394         if (urb->actual_length < sizeof(*event))
395                 return;
396
397         /* SPEED_CHANGE can get split into two 8-byte packets */
398         if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
399                 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
400                 return;
401         }
402
403         event = urb->transfer_buffer;
404         switch (event->bNotificationType) {
405         case USB_CDC_NOTIFY_NETWORK_CONNECTION:
406                 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
407                           event->wValue ? "on" : "off");
408                 usbnet_link_change(dev, !!event->wValue, 0);
409                 break;
410         case USB_CDC_NOTIFY_SPEED_CHANGE:       /* tx/rx rates */
411                 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
412                           urb->actual_length);
413                 if (urb->actual_length != (sizeof(*event) + 8))
414                         set_bit(EVENT_STS_SPLIT, &dev->flags);
415                 else
416                         dumpspeed(dev, (__le32 *) &event[1]);
417                 break;
418         /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
419          * but there are no standard formats for the response data.
420          */
421         default:
422                 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
423                            event->bNotificationType);
424                 break;
425         }
426 }
427 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
428
429 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
430 {
431         int                             status;
432         struct cdc_state                *info = (void *) &dev->data;
433
434         BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
435                         < sizeof(struct cdc_state)));
436
437         status = usbnet_ether_cdc_bind(dev, intf);
438         if (status < 0)
439                 return status;
440
441         status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
442         if (status < 0) {
443                 usb_set_intfdata(info->data, NULL);
444                 usb_driver_release_interface(driver_of(intf), info->data);
445                 return status;
446         }
447
448         return 0;
449 }
450 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
451
452 static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
453 {
454         int status = usbnet_cdc_bind(dev, intf);
455
456         if (!status && (dev->net->dev_addr[0] & 0x02))
457                 eth_hw_addr_random(dev->net);
458
459         return status;
460 }
461
462 /* Make sure packets have correct destination MAC address
463  *
464  * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
465  * device sends packets with a static, bogus, random MAC address (event if
466  * device MAC address has been updated). Always set MAC address to that of the
467  * device.
468  */
469 static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
470 {
471         if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
472                 return 1;
473
474         skb_reset_mac_header(skb);
475         ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
476
477         return 1;
478 }
479
480 /* Ensure correct link state
481  *
482  * Some devices (ZTE MF823/831/910) export two carrier on notifications when
483  * connected. This causes the link state to be incorrect. Work around this by
484  * always setting the state to off, then on.
485  */
486 static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
487 {
488         struct usb_cdc_notification *event;
489
490         if (urb->actual_length < sizeof(*event))
491                 return;
492
493         event = urb->transfer_buffer;
494
495         if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
496                 usbnet_cdc_status(dev, urb);
497                 return;
498         }
499
500         netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
501                   event->wValue ? "on" : "off");
502
503         if (event->wValue &&
504             netif_carrier_ok(dev->net))
505                 netif_carrier_off(dev->net);
506
507         usbnet_link_change(dev, !!event->wValue, 0);
508 }
509
510 static const struct driver_info cdc_info = {
511         .description =  "CDC Ethernet Device",
512         .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
513         .bind =         usbnet_cdc_bind,
514         .unbind =       usbnet_cdc_unbind,
515         .status =       usbnet_cdc_status,
516         .set_rx_mode =  usbnet_cdc_update_filter,
517         .manage_power = usbnet_manage_power,
518 };
519
520 static const struct driver_info zte_cdc_info = {
521         .description =  "ZTE CDC Ethernet Device",
522         .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
523         .bind =         usbnet_cdc_zte_bind,
524         .unbind =       usbnet_cdc_unbind,
525         .status =       usbnet_cdc_zte_status,
526         .set_rx_mode =  usbnet_cdc_update_filter,
527         .manage_power = usbnet_manage_power,
528         .rx_fixup = usbnet_cdc_zte_rx_fixup,
529 };
530
531 static const struct driver_info wwan_info = {
532         .description =  "Mobile Broadband Network Device",
533         .flags =        FLAG_WWAN,
534         .bind =         usbnet_cdc_bind,
535         .unbind =       usbnet_cdc_unbind,
536         .status =       usbnet_cdc_status,
537         .set_rx_mode =  usbnet_cdc_update_filter,
538         .manage_power = usbnet_manage_power,
539 };
540
541 /*-------------------------------------------------------------------------*/
542
543 #define HUAWEI_VENDOR_ID        0x12D1
544 #define NOVATEL_VENDOR_ID       0x1410
545 #define ZTE_VENDOR_ID           0x19D2
546 #define DELL_VENDOR_ID          0x413C
547 #define REALTEK_VENDOR_ID       0x0bda
548 #define SAMSUNG_VENDOR_ID       0x04e8
549 #define LENOVO_VENDOR_ID        0x17ef
550 #define NVIDIA_VENDOR_ID        0x0955
551 #define HP_VENDOR_ID            0x03f0
552 #define MICROSOFT_VENDOR_ID     0x045e
553
554 static const struct usb_device_id       products[] = {
555 /* BLACKLIST !!
556  *
557  * First blacklist any products that are egregiously nonconformant
558  * with the CDC Ethernet specs.  Minor braindamage we cope with; when
559  * they're not even trying, needing a separate driver is only the first
560  * of the differences to show up.
561  */
562
563 #define ZAURUS_MASTER_INTERFACE \
564         .bInterfaceClass        = USB_CLASS_COMM, \
565         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
566         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
567
568 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
569  * wire-incompatible with true CDC Ethernet implementations.
570  * (And, it seems, needlessly so...)
571  */
572 {
573         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
574                           | USB_DEVICE_ID_MATCH_DEVICE,
575         .idVendor               = 0x04DD,
576         .idProduct              = 0x8004,
577         ZAURUS_MASTER_INTERFACE,
578         .driver_info            = 0,
579 },
580
581 /* PXA-25x based Sharp Zaurii.  Note that it seems some of these
582  * (later models especially) may have shipped only with firmware
583  * advertising false "CDC MDLM" compatibility ... but we're not
584  * clear which models did that, so for now let's assume the worst.
585  */
586 {
587         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
588                           | USB_DEVICE_ID_MATCH_DEVICE,
589         .idVendor               = 0x04DD,
590         .idProduct              = 0x8005,       /* A-300 */
591         ZAURUS_MASTER_INTERFACE,
592         .driver_info            = 0,
593 }, {
594         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
595                           | USB_DEVICE_ID_MATCH_DEVICE,
596         .idVendor               = 0x04DD,
597         .idProduct              = 0x8006,       /* B-500/SL-5600 */
598         ZAURUS_MASTER_INTERFACE,
599         .driver_info            = 0,
600 }, {
601         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
602                           | USB_DEVICE_ID_MATCH_DEVICE,
603         .idVendor               = 0x04DD,
604         .idProduct              = 0x8007,       /* C-700 */
605         ZAURUS_MASTER_INTERFACE,
606         .driver_info            = 0,
607 }, {
608         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
609                  | USB_DEVICE_ID_MATCH_DEVICE,
610         .idVendor               = 0x04DD,
611         .idProduct              = 0x9031,       /* C-750 C-760 */
612         ZAURUS_MASTER_INTERFACE,
613         .driver_info            = 0,
614 }, {
615         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
616                  | USB_DEVICE_ID_MATCH_DEVICE,
617         .idVendor               = 0x04DD,
618         .idProduct              = 0x9032,       /* SL-6000 */
619         ZAURUS_MASTER_INTERFACE,
620         .driver_info            = 0,
621 }, {
622         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
623                  | USB_DEVICE_ID_MATCH_DEVICE,
624         .idVendor               = 0x04DD,
625         /* reported with some C860 units */
626         .idProduct              = 0x9050,       /* C-860 */
627         ZAURUS_MASTER_INTERFACE,
628         .driver_info            = 0,
629 },
630
631 /* Olympus has some models with a Zaurus-compatible option.
632  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
633  */
634 {
635         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
636                  | USB_DEVICE_ID_MATCH_DEVICE,
637         .idVendor               = 0x07B4,
638         .idProduct              = 0x0F02,       /* R-1000 */
639         ZAURUS_MASTER_INTERFACE,
640         .driver_info            = 0,
641 },
642
643 /* LG Electronics VL600 wants additional headers on every frame */
644 {
645         USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
646                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
647         .driver_info = 0,
648 },
649
650 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
651 {
652         USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
653                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
654         .driver_info            = 0,
655 },
656
657 /* Novatel USB551L and MC551 - handled by qmi_wwan */
658 {
659         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
660                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
661         .driver_info = 0,
662 },
663
664 /* Novatel E362 - handled by qmi_wwan */
665 {
666         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
667                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
668         .driver_info = 0,
669 },
670
671 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
672 {
673         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
674                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
675         .driver_info = 0,
676 },
677
678 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
679 {
680         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
681                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
682         .driver_info = 0,
683 },
684
685 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
686 {
687         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
688                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
689         .driver_info = 0,
690 },
691
692 /* Novatel Expedite E371 - handled by qmi_wwan */
693 {
694         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
695                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
696         .driver_info = 0,
697 },
698
699 /* HP lt2523 (Novatel E371) - handled by qmi_wwan */
700 {
701         USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
702                                       USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
703         .driver_info = 0,
704 },
705
706 /* AnyDATA ADU960S - handled by qmi_wwan */
707 {
708         USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
709                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
710         .driver_info = 0,
711 },
712
713 /* Huawei E1820 - handled by qmi_wwan */
714 {
715         USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
716         .driver_info = 0,
717 },
718
719 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
720 {
721         USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
722                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
723         .driver_info = 0,
724 },
725
726 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
727 {
728         USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
729                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
730         .driver_info = 0,
731 },
732
733 /* Samsung USB Ethernet Adapters */
734 {
735         USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
736                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
737         .driver_info = 0,
738 },
739
740 /* ThinkPad USB-C Dock (based on Realtek RTL8153) */
741 {
742         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
743                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
744         .driver_info = 0,
745 },
746
747 /* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
748 {
749         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
750                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
751         .driver_info = 0,
752 },
753
754 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
755 {
756         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
757                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
758         .driver_info = 0,
759 },
760
761 /* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
762 {
763         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
764                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
765         .driver_info = 0,
766 },
767
768 /* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
769 {
770         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
771                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
772         .driver_info = 0,
773 },
774
775 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
776 {
777         USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
778                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
779         .driver_info = 0,
780 },
781
782 /* Microsoft Surface 2 dock (based on Realtek RTL8152) */
783 {
784         USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM,
785                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
786         .driver_info = 0,
787 },
788
789 /* Microsoft Surface 3 dock (based on Realtek RTL8153) */
790 {
791         USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
792                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
793         .driver_info = 0,
794 },
795
796 /* WHITELIST!!!
797  *
798  * CDC Ether uses two interfaces, not necessarily consecutive.
799  * We match the main interface, ignoring the optional device
800  * class so we could handle devices that aren't exclusively
801  * CDC ether.
802  *
803  * NOTE:  this match must come AFTER entries blacklisting devices
804  * because of bugs/quirks in a given product (like Zaurus, above).
805  */
806 {
807         /* ZTE (Vodafone) K3805-Z */
808         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
809                                       USB_CDC_SUBCLASS_ETHERNET,
810                                       USB_CDC_PROTO_NONE),
811         .driver_info = (unsigned long)&wwan_info,
812 }, {
813         /* ZTE (Vodafone) K3806-Z */
814         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
815                                       USB_CDC_SUBCLASS_ETHERNET,
816                                       USB_CDC_PROTO_NONE),
817         .driver_info = (unsigned long)&wwan_info,
818 }, {
819         /* ZTE (Vodafone) K4510-Z */
820         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
821                                       USB_CDC_SUBCLASS_ETHERNET,
822                                       USB_CDC_PROTO_NONE),
823         .driver_info = (unsigned long)&wwan_info,
824 }, {
825         /* ZTE (Vodafone) K3770-Z */
826         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
827                                       USB_CDC_SUBCLASS_ETHERNET,
828                                       USB_CDC_PROTO_NONE),
829         .driver_info = (unsigned long)&wwan_info,
830 }, {
831         /* ZTE (Vodafone) K3772-Z */
832         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
833                                       USB_CDC_SUBCLASS_ETHERNET,
834                                       USB_CDC_PROTO_NONE),
835         .driver_info = (unsigned long)&wwan_info,
836 }, {
837         /* Telit modules */
838         USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
839                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
840         .driver_info = (kernel_ulong_t) &wwan_info,
841 }, {
842         /* Dell DW5580 modules */
843         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
844                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
845         .driver_info = (kernel_ulong_t)&wwan_info,
846 }, {
847         /* ZTE modules */
848         USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
849                                       USB_CDC_SUBCLASS_ETHERNET,
850                                       USB_CDC_PROTO_NONE),
851         .driver_info = (unsigned long)&zte_cdc_info,
852 }, {
853         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
854                         USB_CDC_PROTO_NONE),
855         .driver_info = (unsigned long) &cdc_info,
856 }, {
857         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
858                         USB_CDC_PROTO_NONE),
859         .driver_info = (unsigned long)&wwan_info,
860
861 }, {
862         /* Various Huawei modems with a network port like the UMG1831 */
863         USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
864                                       USB_CDC_SUBCLASS_ETHERNET, 255),
865         .driver_info = (unsigned long)&wwan_info,
866 },
867         { },            /* END */
868 };
869 MODULE_DEVICE_TABLE(usb, products);
870
871 static struct usb_driver cdc_driver = {
872         .name =         "cdc_ether",
873         .id_table =     products,
874         .probe =        usbnet_probe,
875         .disconnect =   usbnet_disconnect,
876         .suspend =      usbnet_suspend,
877         .resume =       usbnet_resume,
878         .reset_resume = usbnet_resume,
879         .supports_autosuspend = 1,
880         .disable_hub_initiated_lpm = 1,
881 };
882
883 module_usb_driver(cdc_driver);
884
885 MODULE_AUTHOR("David Brownell");
886 MODULE_DESCRIPTION("USB CDC Ethernet devices");
887 MODULE_LICENSE("GPL");