drivers/net/tokenring/tms380tr.c

   1 /*
   2  *  tms380tr.c: A network driver library for Texas Instruments TMS380-based
   3  *              Token Ring Adapters.
   4  *
   5  *  Originally sktr.c: Written 1997 by Christoph Goos
   6  *
   7  *  A fine result of the Linux Systems Network Architecture Project.
   8  *  http://www.linux-sna.org
   9  *
  10  *  This software may be used and distributed according to the terms
  11  *  of the GNU General Public License, incorporated herein by reference.
  12  *
  13  *  The following modules are currently available for card support:
  14  *      - tmspci (Generic PCI card support)
  15  *      - abyss (Madge PCI support)
  16  *      - tmsisa (SysKonnect TR4/16 ISA)
  17  *
  18  *  Sources:
  19  *      - The hardware related parts of this driver are take from
  20  *        the SysKonnect Token Ring driver for Windows NT.
  21  *      - I used the IBM Token Ring driver 'ibmtr.c' as a base for this
  22  *        driver, as well as the 'skeleton.c' driver by Donald Becker.
  23  *      - Also various other drivers in the linux source tree were taken
  24  *        as samples for some tasks.
  25  *      - TI TMS380 Second-Generation Token Ring User's Guide
  26  *      - TI datasheets for respective chips
  27  *      - David Hein at Texas Instruments
  28  *      - Various Madge employees
  29  *
  30  *  Maintainer(s):
  31  *    JS        Jay Schulist            jschlst@samba.org
  32  *    CG        Christoph Goos          cgoos@syskonnect.de
  33  *    AF        Adam Fritzler
  34  *    MLP       Mike Phillips           phillim@amtrak.com
  35  *    JF        Jochen Friedrich        jochen@scram.de
  36  *
  37  *  Modification History:
  38  *      29-Aug-97       CG      Created
  39  *      04-Apr-98       CG      Fixed problems caused by tok_timer_check
  40  *      10-Apr-98       CG      Fixed lockups at cable disconnection
  41  *      27-May-98       JS      Formated to Linux Kernel Format
  42  *      31-May-98       JS      Hacked in PCI support
  43  *      16-Jun-98       JS      Modulized for multiple cards with one driver
  44  *         Sep-99       AF      Renamed to tms380tr (supports more than SK's)
  45  *      23-Sep-99       AF      Added Compaq and Thomas-Conrad PCI support
  46  *                              Fixed a bug causing double copies on PCI
  47  *                              Fixed for new multicast stuff (2.2/2.3)
  48  *      25-Sep-99       AF      Uped TPL_NUM from 3 to 9
  49  *                              Removed extraneous 'No free TPL'
  50  *      22-Dec-99       AF      Added Madge PCI Mk2 support and generalized
  51  *                              parts of the initilization procedure.
  52  *      30-Dec-99       AF      Turned tms380tr into a library ala 8390.
  53  *                              Madge support is provided in the abyss module
  54  *                              Generic PCI support is in the tmspci module.
  55  *      30-Nov-00       JF      Updated PCI code to support IO MMU via
  56  *                              pci_map_static(). Alpha uses this MMU for ISA
  57  *                              as well.
  58  *      14-Jan-01       JF      Fix DMA on ifdown/ifup sequences. Some
  59  *                              cleanup.
  60  *      13-Jan-02       JF      Add spinlock to fix race condition.
  61  *      09-Nov-02       JF      Fixed printks to not SPAM the console during
  62  *                              normal operation.
  63  *      30-Dec-02       JF      Removed incorrect __init from
  64  *                              tms380tr_init_card.
  65  *      22-Jul-05       JF      Converted to dma-mapping.
  66  *
  67  *  To do:
  68  *    1. Multi/Broadcast packet handling (this may have fixed itself)
  69  *    2. Write a sktrisa module that includes the old ISA support (done)
  70  *    3. Allow modules to load their own microcode
  71  *    4. Speed up the BUD process -- freezing the kernel for 3+sec is
  72  *         quite unacceptable.
  73  *    5. Still a few remaining stalls when the cable is unplugged.
  74  */
  75
  76 #ifdef MODULE
  77 static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, Adam Fritzler\n";
  78 #endif
  79
  80 #include <linux/module.h>
  81 #include <linux/kernel.h>
  82 #include <linux/types.h>
  83 #include <linux/fcntl.h>
  84 #include <linux/interrupt.h>
  85 #include <linux/ptrace.h>
  86 #include <linux/ioport.h>
  87 #include <linux/in.h>
  88 #include <linux/slab.h>
  89 #include <linux/string.h>
  90 #include <linux/time.h>
  91 #include <linux/errno.h>
  92 #include <linux/init.h>
  93 #include <linux/dma-mapping.h>
  94 #include <linux/delay.h>
  95 #include <linux/netdevice.h>
  96 #include <linux/etherdevice.h>
  97 #include <linux/skbuff.h>
  98 #include <linux/trdevice.h>
  99 #include <linux/firmware.h>
 100 #include <linux/bitops.h>
 101
 102 #include <asm/system.h>
 103 #include <asm/io.h>
 104 #include <asm/dma.h>
 105 #include <asm/irq.h>
 106 #include <asm/uaccess.h>
 107
 108 #include "tms380tr.h"           /* Our Stuff */
 109
 110 /* Use 0 for production, 1 for verification, 2 for debug, and
 111  * 3 for very verbose debug.
 112  */
 113 #ifndef TMS380TR_DEBUG
 114 #define TMS380TR_DEBUG 0
 115 #endif
 116 static unsigned int tms380tr_debug = TMS380TR_DEBUG;
 117
 118 /* Index to functions, as function prototypes.
 119  * Alphabetical by function name.
 120  */
 121
 122 /* "A" */
 123 /* "B" */
 124 static int      tms380tr_bringup_diags(struct net_device *dev);
 125 /* "C" */
 126 static void     tms380tr_cancel_tx_queue(struct net_local* tp);
 127 static int      tms380tr_chipset_init(struct net_device *dev);
 128 static void     tms380tr_chk_irq(struct net_device *dev);
 129 static void     tms380tr_chk_outstanding_cmds(struct net_device *dev);
 130 static void     tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr);
 131 static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType);
 132 int             tms380tr_close(struct net_device *dev);
 133 static void     tms380tr_cmd_status_irq(struct net_device *dev);
 134 /* "D" */
 135 static void     tms380tr_disable_interrupts(struct net_device *dev);
 136 #if TMS380TR_DEBUG > 0
 137 static void     tms380tr_dump(unsigned char *Data, int length);
 138 #endif
 139 /* "E" */
 140 static void     tms380tr_enable_interrupts(struct net_device *dev);
 141 static void     tms380tr_exec_cmd(struct net_device *dev, unsigned short Command);
 142 static void     tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue);
 143 /* "F" */
 144 /* "G" */
 145 static struct net_device_stats *tms380tr_get_stats(struct net_device *dev);
 146 /* "H" */
 147 static int      tms380tr_hardware_send_packet(struct sk_buff *skb,
 148                         struct net_device *dev);
 149 /* "I" */
 150 static int      tms380tr_init_adapter(struct net_device *dev);
 151 static void     tms380tr_init_ipb(struct net_local *tp);
 152 static void     tms380tr_init_net_local(struct net_device *dev);
 153 static void     tms380tr_init_opb(struct net_device *dev);
 154 /* "M" */
 155 /* "O" */
 156 int             tms380tr_open(struct net_device *dev);
 157 static void     tms380tr_open_adapter(struct net_device *dev);
 158 /* "P" */
 159 /* "R" */
 160 static void     tms380tr_rcv_status_irq(struct net_device *dev);
 161 static int      tms380tr_read_ptr(struct net_device *dev);
 162 static void     tms380tr_read_ram(struct net_device *dev, unsigned char *Data,
 163                         unsigned short Address, int Length);
 164 static int      tms380tr_reset_adapter(struct net_device *dev);
 165 static void     tms380tr_reset_interrupt(struct net_device *dev);
 166 static void     tms380tr_ring_status_irq(struct net_device *dev);
 167 /* "S" */
 168 static int      tms380tr_send_packet(struct sk_buff *skb, struct net_device *dev);
 169 static void     tms380tr_set_multicast_list(struct net_device *dev);
 170 static int      tms380tr_set_mac_address(struct net_device *dev, void *addr);
 171 /* "T" */
 172 static void     tms380tr_timer_chk(unsigned long data);
 173 static void     tms380tr_timer_end_wait(unsigned long data);
 174 static void     tms380tr_tx_status_irq(struct net_device *dev);
 175 /* "U" */
 176 static void     tms380tr_update_rcv_stats(struct net_local *tp,
 177                         unsigned char DataPtr[], unsigned int Length);
 178 /* "W" */
 179 void            tms380tr_wait(unsigned long time);
 180 static void     tms380tr_write_rpl_status(RPL *rpl, unsigned int Status);
 181 static void     tms380tr_write_tpl_status(TPL *tpl, unsigned int Status);
 182
 183 #define SIFREADB(reg) \
 184         (((struct net_local *)netdev_priv(dev))->sifreadb(dev, reg))
 185 #define SIFWRITEB(val, reg) \
 186         (((struct net_local *)netdev_priv(dev))->sifwriteb(dev, val, reg))
 187 #define SIFREADW(reg) \
 188         (((struct net_local *)netdev_priv(dev))->sifreadw(dev, reg))
 189 #define SIFWRITEW(val, reg) \
 190         (((struct net_local *)netdev_priv(dev))->sifwritew(dev, val, reg))
 191
 192
 193
 194 #if 0 /* TMS380TR_DEBUG > 0 */
 195 static int madgemc_sifprobe(struct net_device *dev)
 196 {
 197         unsigned char old, chk1, chk2;
 198
 199         old = SIFREADB(SIFADR);  /* Get the old SIFADR value */
 200
 201         chk1 = 0;       /* Begin with check value 0 */
 202         do {
 203                 madgemc_setregpage(dev, 0);
 204                 /* Write new SIFADR value */
 205                 SIFWRITEB(chk1, SIFADR);
 206                 chk2 = SIFREADB(SIFADR);
 207                 if (chk2 != chk1)
 208                         return -1;
 209
 210                 madgemc_setregpage(dev, 1);
 211                 /* Read, invert and write */
 212                 chk2 = SIFREADB(SIFADD);
 213                 if (chk2 != chk1)
 214                         return -1;
 215
 216                 madgemc_setregpage(dev, 0);
 217                 chk2 ^= 0x0FE;
 218                 SIFWRITEB(chk2, SIFADR);
 219
 220                 /* Read, invert and compare */
 221                 madgemc_setregpage(dev, 1);
 222                 chk2 = SIFREADB(SIFADD);
 223                 madgemc_setregpage(dev, 0);
 224                 chk2 ^= 0x0FE;
 225
 226                 if(chk1 != chk2)
 227                         return (-1);    /* No adapter */
 228                 chk1 -= 2;
 229         } while(chk1 != 0);     /* Repeat 128 times (all byte values) */
 230
 231         madgemc_setregpage(dev, 0); /* sanity */
 232         /* Restore the SIFADR value */
 233         SIFWRITEB(old, SIFADR);
 234
 235         return (0);
 236 }
 237 #endif
 238
 239 /*
 240  * Open/initialize the board. This is called sometime after
 241  * booting when the 'ifconfig' program is run.
 242  *
 243  * This routine should set everything up anew at each open, even
 244  * registers that "should" only need to be set once at boot, so that
 245  * there is non-reboot way to recover if something goes wrong.
 246  */
 247 int tms380tr_open(struct net_device *dev)
 248 {
 249         struct net_local *tp = netdev_priv(dev);
 250         int err;
 251
 252         /* init the spinlock */
 253         spin_lock_init(&tp->lock);
 254         init_timer(&tp->timer);
 255
 256         /* Reset the hardware here. Don't forget to set the station address. */
 257
 258 #ifdef CONFIG_ISA
 259         if(dev->dma > 0)
 260         {
 261                 unsigned long flags=claim_dma_lock();
 262                 disable_dma(dev->dma);
 263                 set_dma_mode(dev->dma, DMA_MODE_CASCADE);
 264                 enable_dma(dev->dma);
 265                 release_dma_lock(flags);
 266         }
 267 #endif
 268
 269         err = tms380tr_chipset_init(dev);
 270         if(err)
 271         {
 272                 printk(KERN_INFO "%s: Chipset initialization error\n",
 273                         dev->name);
 274                 return (-1);
 275         }
 276
 277         tp->timer.expires       = jiffies + 30*HZ;
 278         tp->timer.function      = tms380tr_timer_end_wait;
 279         tp->timer.data          = (unsigned long)dev;
 280         add_timer(&tp->timer);
 281
 282         printk(KERN_DEBUG "%s: Adapter RAM size: %dK\n",
 283                dev->name, tms380tr_read_ptr(dev));
 284
 285         tms380tr_enable_interrupts(dev);
 286         tms380tr_open_adapter(dev);
 287
 288         netif_start_queue(dev);
 289
 290         /* Wait for interrupt from hardware. If interrupt does not come,
 291          * there will be a timeout from the timer.
 292          */
 293         tp->Sleeping = 1;
 294         interruptible_sleep_on(&tp->wait_for_tok_int);
 295         del_timer(&tp->timer);
 296
 297         /* If AdapterVirtOpenFlag is 1, the adapter is now open for use */
 298         if(tp->AdapterVirtOpenFlag == 0)
 299         {
 300                 tms380tr_disable_interrupts(dev);
 301                 return (-1);
 302         }
 303
 304         tp->StartTime = jiffies;
 305
 306         /* Start function control timer */
 307         tp->timer.expires       = jiffies + 2*HZ;
 308         tp->timer.function      = tms380tr_timer_chk;
 309         tp->timer.data          = (unsigned long)dev;
 310         add_timer(&tp->timer);
 311
 312         return (0);
 313 }
 314
 315 /*
 316  * Timeout function while waiting for event
 317  */
 318 static void tms380tr_timer_end_wait(unsigned long data)
 319 {
 320         struct net_device *dev = (struct net_device*)data;
 321         struct net_local *tp = netdev_priv(dev);
 322
 323         if(tp->Sleeping)
 324         {
 325                 tp->Sleeping = 0;
 326                 wake_up_interruptible(&tp->wait_for_tok_int);
 327         }
 328
 329         return;
 330 }
 331
 332 /*
 333  * Initialize the chipset
 334  */
 335 static int tms380tr_chipset_init(struct net_device *dev)
 336 {
 337         struct net_local *tp = netdev_priv(dev);
 338         int err;
 339
 340         tms380tr_init_ipb(tp);
 341         tms380tr_init_opb(dev);
 342         tms380tr_init_net_local(dev);
 343
 344         if(tms380tr_debug > 3)
 345                 printk(KERN_DEBUG "%s: Resetting adapter...\n", dev->name);
 346         err = tms380tr_reset_adapter(dev);
 347         if(err < 0)
 348                 return (-1);
 349
 350         if(tms380tr_debug > 3)
 351                 printk(KERN_DEBUG "%s: Bringup diags...\n", dev->name);
 352         err = tms380tr_bringup_diags(dev);
 353         if(err < 0)
 354                 return (-1);
 355
 356         if(tms380tr_debug > 3)
 357                 printk(KERN_DEBUG "%s: Init adapter...\n", dev->name);
 358         err = tms380tr_init_adapter(dev);
 359         if(err < 0)
 360                 return (-1);
 361
 362         if(tms380tr_debug > 3)
 363                 printk(KERN_DEBUG "%s: Done!\n", dev->name);
 364         return (0);
 365 }
 366
 367 /*
 368  * Initializes the net_local structure.
 369  */
 370 static void tms380tr_init_net_local(struct net_device *dev)
 371 {
 372         struct net_local *tp = netdev_priv(dev);
 373         int i;
 374         dma_addr_t dmabuf;
 375
 376         tp->scb.CMD     = 0;
 377         tp->scb.Parm[0] = 0;
 378         tp->scb.Parm[1] = 0;
 379
 380         tp->ssb.STS     = 0;
 381         tp->ssb.Parm[0] = 0;
 382         tp->ssb.Parm[1] = 0;
 383         tp->ssb.Parm[2] = 0;
 384
 385         tp->CMDqueue    = 0;
 386
 387         tp->AdapterOpenFlag     = 0;
 388         tp->AdapterVirtOpenFlag = 0;
 389         tp->ScbInUse            = 0;
 390         tp->OpenCommandIssued   = 0;
 391         tp->ReOpenInProgress    = 0;
 392         tp->HaltInProgress      = 0;
 393         tp->TransmitHaltScheduled = 0;
 394         tp->LobeWireFaultLogged = 0;
 395         tp->LastOpenStatus      = 0;
 396         tp->MaxPacketSize       = DEFAULT_PACKET_SIZE;
 397
 398         /* Create circular chain of transmit lists */
 399         for (i = 0; i < TPL_NUM; i++)
 400         {
 401                 tp->Tpl[i].NextTPLAddr = htonl(((char *)(&tp->Tpl[(i+1) % TPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */
 402                 tp->Tpl[i].Status       = 0;
 403                 tp->Tpl[i].FrameSize    = 0;
 404                 tp->Tpl[i].FragList[0].DataCount        = 0;
 405                 tp->Tpl[i].FragList[0].DataAddr         = 0;
 406                 tp->Tpl[i].NextTPLPtr   = &tp->Tpl[(i+1) % TPL_NUM];
 407                 tp->Tpl[i].MData        = NULL;
 408                 tp->Tpl[i].TPLIndex     = i;
 409                 tp->Tpl[i].DMABuff      = 0;
 410                 tp->Tpl[i].BusyFlag     = 0;
 411         }
 412
 413         tp->TplFree = tp->TplBusy = &tp->Tpl[0];
 414
 415         /* Create circular chain of receive lists */
 416         for (i = 0; i < RPL_NUM; i++)
 417         {
 418                 tp->Rpl[i].NextRPLAddr = htonl(((char *)(&tp->Rpl[(i+1) % RPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */
 419                 tp->Rpl[i].Status = (RX_VALID | RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ);
 420                 tp->Rpl[i].FrameSize = 0;
 421                 tp->Rpl[i].FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize);
 422
 423                 /* Alloc skb and point adapter to data area */
 424                 tp->Rpl[i].Skb = dev_alloc_skb(tp->MaxPacketSize);
 425                         tp->Rpl[i].DMABuff = 0;
 426
 427                 /* skb == NULL ? then use local buffer */
 428                 if(tp->Rpl[i].Skb == NULL)
 429                 {
 430                         tp->Rpl[i].SkbStat = SKB_UNAVAILABLE;
 431                         tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer);
 432                         tp->Rpl[i].MData = tp->LocalRxBuffers[i];
 433                 }
 434                 else    /* SKB != NULL */
 435                 {
 436                         tp->Rpl[i].Skb->dev = dev;
 437                         skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize);
 438
 439                         /* data unreachable for DMA ? then use local buffer */
 440                         dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
 441                         if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
 442                         {
 443                                 tp->Rpl[i].SkbStat = SKB_DATA_COPY;
 444                                 tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer);
 445                                 tp->Rpl[i].MData = tp->LocalRxBuffers[i];
 446                         }
 447                         else    /* DMA directly in skb->data */
 448                         {
 449                                 tp->Rpl[i].SkbStat = SKB_DMA_DIRECT;
 450                                 tp->Rpl[i].FragList[0].DataAddr = htonl(dmabuf);
 451                                 tp->Rpl[i].MData = tp->Rpl[i].Skb->data;
 452                                 tp->Rpl[i].DMABuff = dmabuf;
 453                         }
 454                 }
 455
 456                 tp->Rpl[i].NextRPLPtr = &tp->Rpl[(i+1) % RPL_NUM];
 457                 tp->Rpl[i].RPLIndex = i;
 458         }
 459
 460         tp->RplHead = &tp->Rpl[0];
 461         tp->RplTail = &tp->Rpl[RPL_NUM-1];
 462         tp->RplTail->Status = (RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ);
 463
 464         return;
 465 }
 466
 467 /*
 468  * Initializes the initialisation parameter block.
 469  */
 470 static void tms380tr_init_ipb(struct net_local *tp)
 471 {
 472         tp->ipb.Init_Options    = BURST_MODE;
 473         tp->ipb.CMD_Status_IV   = 0;
 474         tp->ipb.TX_IV           = 0;
 475         tp->ipb.RX_IV           = 0;
 476         tp->ipb.Ring_Status_IV  = 0;
 477         tp->ipb.SCB_Clear_IV    = 0;
 478         tp->ipb.Adapter_CHK_IV  = 0;
 479         tp->ipb.RX_Burst_Size   = BURST_SIZE;
 480         tp->ipb.TX_Burst_Size   = BURST_SIZE;
 481         tp->ipb.DMA_Abort_Thrhld = DMA_RETRIES;
 482         tp->ipb.SCB_Addr        = 0;
 483         tp->ipb.SSB_Addr        = 0;
 484
 485         return;
 486 }
 487
 488 /*
 489  * Initializes the open parameter block.
 490  */
 491 static void tms380tr_init_opb(struct net_device *dev)
 492 {
 493         struct net_local *tp;
 494         unsigned long Addr;
 495         unsigned short RplSize    = RPL_SIZE;
 496         unsigned short TplSize    = TPL_SIZE;
 497         unsigned short BufferSize = BUFFER_SIZE;
 498         int i;
 499
 500         tp = netdev_priv(dev);
 501
 502         tp->ocpl.OPENOptions     = 0;
 503         tp->ocpl.OPENOptions    |= ENABLE_FULL_DUPLEX_SELECTION;
 504         tp->ocpl.FullDuplex      = 0;
 505         tp->ocpl.FullDuplex     |= OPEN_FULL_DUPLEX_OFF;
 506
 507         /*
 508          * Set node address
 509          *
 510          * We go ahead and put it in the OPB even though on
 511          * most of the generic adapters this isn't required.
 512          * Its simpler this way.  -- ASF
 513          */
 514         for (i=0;i<6;i++)
 515                 tp->ocpl.NodeAddr[i] = ((unsigned char *)dev->dev_addr)[i];
 516
 517         tp->ocpl.GroupAddr       = 0;
 518         tp->ocpl.FunctAddr       = 0;
 519         tp->ocpl.RxListSize      = cpu_to_be16((unsigned short)RplSize);
 520         tp->ocpl.TxListSize      = cpu_to_be16((unsigned short)TplSize);
 521         tp->ocpl.BufSize         = cpu_to_be16((unsigned short)BufferSize);
 522         tp->ocpl.Reserved        = 0;
 523         tp->ocpl.TXBufMin        = TX_BUF_MIN;
 524         tp->ocpl.TXBufMax        = TX_BUF_MAX;
 525
 526         Addr = htonl(((char *)tp->ProductID - (char *)tp) + tp->dmabuffer);
 527
 528         tp->ocpl.ProdIDAddr[0]   = LOWORD(Addr);
 529         tp->ocpl.ProdIDAddr[1]   = HIWORD(Addr);
 530
 531         return;
 532 }
 533
 534 /*
 535  * Send OPEN command to adapter
 536  */
 537 static void tms380tr_open_adapter(struct net_device *dev)
 538 {
 539         struct net_local *tp = netdev_priv(dev);
 540
 541         if(tp->OpenCommandIssued)
 542                 return;
 543
 544         tp->OpenCommandIssued = 1;
 545         tms380tr_exec_cmd(dev, OC_OPEN);
 546
 547         return;
 548 }
 549
 550 /*
 551  * Clear the adapter's interrupt flag. Clear system interrupt enable
 552  * (SINTEN): disable adapter to system interrupts.
 553  */
 554 static void tms380tr_disable_interrupts(struct net_device *dev)
 555 {
 556         SIFWRITEB(0, SIFACL);
 557
 558         return;
 559 }
 560
 561 /*
 562  * Set the adapter's interrupt flag. Set system interrupt enable
 563  * (SINTEN): enable adapter to system interrupts.
 564  */
 565 static void tms380tr_enable_interrupts(struct net_device *dev)
 566 {
 567         SIFWRITEB(ACL_SINTEN, SIFACL);
 568
 569         return;
 570 }
 571
 572 /*
 573  * Put command in command queue, try to execute it.
 574  */
 575 static void tms380tr_exec_cmd(struct net_device *dev, unsigned short Command)
 576 {
 577         struct net_local *tp = netdev_priv(dev);
 578
 579         tp->CMDqueue |= Command;
 580         tms380tr_chk_outstanding_cmds(dev);
 581
 582         return;
 583 }
 584
 585 static void tms380tr_timeout(struct net_device *dev)
 586 {
 587         /*
 588          * If we get here, some higher level has decided we are broken.
 589          * There should really be a "kick me" function call instead.
 590          *
 591          * Resetting the token ring adapter takes a long time so just
 592          * fake transmission time and go on trying. Our own timeout
 593          * routine is in tms380tr_timer_chk()
 594          */
 595         dev->trans_start = jiffies;
 596         netif_wake_queue(dev);
 597 }
 598
 599 /*
 600  * Gets skb from system, queues it and checks if it can be sent
 601  */
 602 static int tms380tr_send_packet(struct sk_buff *skb, struct net_device *dev)
 603 {
 604         struct net_local *tp = netdev_priv(dev);
 605         int err;
 606
 607         err = tms380tr_hardware_send_packet(skb, dev);
 608         if(tp->TplFree->NextTPLPtr->BusyFlag)
 609                 netif_stop_queue(dev);
 610         return (err);
 611 }
 612
 613 /*
 614  * Move frames into adapter tx queue
 615  */
 616 static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device *dev)
 617 {
 618         TPL *tpl;
 619         short length;
 620         unsigned char *buf;
 621         unsigned long flags;
 622         int i;
 623         dma_addr_t dmabuf, newbuf;
 624         struct net_local *tp = netdev_priv(dev);
 625
 626         /* Try to get a free TPL from the chain.
 627          *
 628          * NOTE: We *must* always leave one unused TPL in the chain,
 629          * because otherwise the adapter might send frames twice.
 630          */
 631         spin_lock_irqsave(&tp->lock, flags);
 632         if(tp->TplFree->NextTPLPtr->BusyFlag)  { /* No free TPL */
 633                 if (tms380tr_debug > 0)
 634                         printk(KERN_DEBUG "%s: No free TPL\n", dev->name);
 635                 spin_unlock_irqrestore(&tp->lock, flags);
 636                 return 1;
 637         }
 638
 639         dmabuf = 0;
 640
 641         /* Is buffer reachable for Busmaster-DMA? */
 642
 643         length  = skb->len;
 644         dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE);
 645         if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) {
 646                 /* Copy frame to local buffer */
 647                 dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE);
 648                 dmabuf  = 0;
 649                 i       = tp->TplFree->TPLIndex;
 650                 buf     = tp->LocalTxBuffers[i];
 651                 skb_copy_from_linear_data(skb, buf, length);
 652                 newbuf  = ((char *)buf - (char *)tp) + tp->dmabuffer;
 653         }
 654         else {
 655                 /* Send direct from skb->data */
 656                 newbuf  = dmabuf;
 657                 buf     = skb->data;
 658         }
 659         /* Source address in packet? */
 660         tms380tr_chk_src_addr(buf, dev->dev_addr);
 661         tp->LastSendTime        = jiffies;
 662         tpl                     = tp->TplFree;  /* Get the "free" TPL */
 663         tpl->BusyFlag           = 1;            /* Mark TPL as busy */
 664         tp->TplFree             = tpl->NextTPLPtr;
 665
 666         /* Save the skb for delayed return of skb to system */
 667         tpl->Skb = skb;
 668         tpl->DMABuff = dmabuf;
 669         tpl->FragList[0].DataCount = cpu_to_be16((unsigned short)length);
 670         tpl->FragList[0].DataAddr  = htonl(newbuf);
 671
 672         /* Write the data length in the transmit list. */
 673         tpl->FrameSize  = cpu_to_be16((unsigned short)length);
 674         tpl->MData      = buf;
 675
 676         /* Transmit the frame and set the status values. */
 677         tms380tr_write_tpl_status(tpl, TX_VALID | TX_START_FRAME
 678                                 | TX_END_FRAME | TX_PASS_SRC_ADDR
 679                                 | TX_FRAME_IRQ);
 680
 681         /* Let adapter send the frame. */
 682         tms380tr_exec_sifcmd(dev, CMD_TX_VALID);
 683         spin_unlock_irqrestore(&tp->lock, flags);
 684
 685         return 0;
 686 }
 687
 688 /*
 689  * Write the given value to the 'Status' field of the specified TPL.
 690  * NOTE: This function should be used whenever the status of any TPL must be
 691  * modified by the driver, because the compiler may otherwise change the
 692  * order of instructions such that writing the TPL status may be executed at
 693  * an undesireable time. When this function is used, the status is always
 694  * written when the function is called.
 695  */
 696 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
 697 {
 698         tpl->Status = Status;
 699 }
 700
 701 static void tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr)
 702 {
 703         unsigned char SRBit;
 704
 705         if((((unsigned long)frame[8]) & ~0x80) != 0)    /* Compare 4 bytes */
 706                 return;
 707         if((unsigned short)frame[12] != 0)              /* Compare 2 bytes */
 708                 return;
 709
 710         SRBit = frame[8] & 0x80;
 711         memcpy(&frame[8], hw_addr, 6);
 712         frame[8] |= SRBit;
 713
 714         return;
 715 }
 716
 717 /*
 718  * The timer routine: Check if adapter still open and working, reopen if not.
 719  */
 720 static void tms380tr_timer_chk(unsigned long data)
 721 {
 722         struct net_device *dev = (struct net_device*)data;
 723         struct net_local *tp = netdev_priv(dev);
 724
 725         if(tp->HaltInProgress)
 726                 return;
 727
 728         tms380tr_chk_outstanding_cmds(dev);
 729         if(time_before(tp->LastSendTime + SEND_TIMEOUT, jiffies)
 730                 && (tp->TplFree != tp->TplBusy))
 731         {
 732                 /* Anything to send, but stalled too long */
 733                 tp->LastSendTime = jiffies;
 734                 tms380tr_exec_cmd(dev, OC_CLOSE);       /* Does reopen automatically */
 735         }
 736
 737         tp->timer.expires = jiffies + 2*HZ;
 738         add_timer(&tp->timer);
 739
 740         if(tp->AdapterOpenFlag || tp->ReOpenInProgress)
 741                 return;
 742         tp->ReOpenInProgress = 1;
 743         tms380tr_open_adapter(dev);
 744
 745         return;
 746 }
 747
 748 /*
 749  * The typical workload of the driver: Handle the network interface interrupts.
 750  */
 751 irqreturn_t tms380tr_interrupt(int irq, void *dev_id)
 752 {
 753         struct net_device *dev = dev_id;
 754         struct net_local *tp;
 755         unsigned short irq_type;
 756         int handled = 0;
 757
 758         tp = netdev_priv(dev);
 759
 760         irq_type = SIFREADW(SIFSTS);
 761
 762         while(irq_type & STS_SYSTEM_IRQ) {
 763                 handled = 1;
 764                 irq_type &= STS_IRQ_MASK;
 765
 766                 if(!tms380tr_chk_ssb(tp, irq_type)) {
 767                         printk(KERN_DEBUG "%s: DATA LATE occurred\n", dev->name);
 768                         break;
 769                 }
 770
 771                 switch(irq_type) {
 772                 case STS_IRQ_RECEIVE_STATUS:
 773                         tms380tr_reset_interrupt(dev);
 774                         tms380tr_rcv_status_irq(dev);
 775                         break;
 776
 777                 case STS_IRQ_TRANSMIT_STATUS:
 778                         /* Check if TRANSMIT.HALT command is complete */
 779                         if(tp->ssb.Parm[0] & COMMAND_COMPLETE) {
 780                                 tp->TransmitCommandActive = 0;
 781                                         tp->TransmitHaltScheduled = 0;
 782
 783                                         /* Issue a new transmit command. */
 784                                         tms380tr_exec_cmd(dev, OC_TRANSMIT);
 785                                 }
 786
 787                                 tms380tr_reset_interrupt(dev);
 788                                 tms380tr_tx_status_irq(dev);
 789                                 break;
 790
 791                 case STS_IRQ_COMMAND_STATUS:
 792                         /* The SSB contains status of last command
 793                          * other than receive/transmit.
 794                          */
 795                         tms380tr_cmd_status_irq(dev);
 796                         break;
 797
 798                 case STS_IRQ_SCB_CLEAR:
 799                         /* The SCB is free for another command. */
 800                         tp->ScbInUse = 0;
 801                         tms380tr_chk_outstanding_cmds(dev);
 802                         break;
 803
 804                 case STS_IRQ_RING_STATUS:
 805                         tms380tr_ring_status_irq(dev);
 806                         break;
 807
 808                 case STS_IRQ_ADAPTER_CHECK:
 809                         tms380tr_chk_irq(dev);
 810                         break;
 811
 812                 case STS_IRQ_LLC_STATUS:
 813                         printk(KERN_DEBUG "tms380tr: unexpected LLC status IRQ\n");
 814                         break;
 815
 816                 case STS_IRQ_TIMER:
 817                         printk(KERN_DEBUG "tms380tr: unexpected Timer IRQ\n");
 818                         break;
 819
 820                 case STS_IRQ_RECEIVE_PENDING:
 821                         printk(KERN_DEBUG "tms380tr: unexpected Receive Pending IRQ\n");
 822                         break;
 823
 824                 default:
 825                         printk(KERN_DEBUG "Unknown Token Ring IRQ (0x%04x)\n", irq_type);
 826                         break;
 827                 }
 828
 829                 /* Reset system interrupt if not already done. */
 830                 if(irq_type != STS_IRQ_TRANSMIT_STATUS
 831                         && irq_type != STS_IRQ_RECEIVE_STATUS) {
 832                         tms380tr_reset_interrupt(dev);
 833                 }
 834
 835                 irq_type = SIFREADW(SIFSTS);
 836         }
 837
 838         return IRQ_RETVAL(handled);
 839 }
 840
 841 /*
 842  *  Reset the INTERRUPT SYSTEM bit and issue SSB CLEAR command.
 843  */
 844 static void tms380tr_reset_interrupt(struct net_device *dev)
 845 {
 846         struct net_local *tp = netdev_priv(dev);
 847         SSB *ssb = &tp->ssb;
 848
 849         /*
 850          * [Workaround for "Data Late"]
 851          * Set all fields of the SSB to well-defined values so we can
 852          * check if the adapter has written the SSB.
 853          */
 854
 855         ssb->STS        = (unsigned short) -1;
 856         ssb->Parm[0]    = (unsigned short) -1;
 857         ssb->Parm[1]    = (unsigned short) -1;
 858         ssb->Parm[2]    = (unsigned short) -1;
 859
 860         /* Free SSB by issuing SSB_CLEAR command after reading IRQ code
 861          * and clear STS_SYSTEM_IRQ bit: enable adapter for further interrupts.
 862          */
 863         tms380tr_exec_sifcmd(dev, CMD_SSB_CLEAR | CMD_CLEAR_SYSTEM_IRQ);
 864
 865         return;
 866 }
 867
 868 /*
 869  * Check if the SSB has actually been written by the adapter.
 870  */
 871 static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType)
 872 {
 873         SSB *ssb = &tp->ssb;    /* The address of the SSB. */
 874
 875         /* C 0 1 2 INTERRUPT CODE
 876          * - - - - --------------
 877          * 1 1 1 1 TRANSMIT STATUS
 878          * 1 1 1 1 RECEIVE STATUS
 879          * 1 ? ? 0 COMMAND STATUS
 880          * 0 0 0 0 SCB CLEAR
 881          * 1 1 0 0 RING STATUS
 882          * 0 0 0 0 ADAPTER CHECK
 883          *
 884          * 0 = SSB field not affected by interrupt
 885          * 1 = SSB field is affected by interrupt
 886          *
 887          * C = SSB ADDRESS +0: COMMAND
 888          * 0 = SSB ADDRESS +2: STATUS 0
 889          * 1 = SSB ADDRESS +4: STATUS 1
 890          * 2 = SSB ADDRESS +6: STATUS 2
 891          */
 892
 893         /* Check if this interrupt does use the SSB. */
 894
 895         if(IrqType != STS_IRQ_TRANSMIT_STATUS
 896                 && IrqType != STS_IRQ_RECEIVE_STATUS
 897                 && IrqType != STS_IRQ_COMMAND_STATUS
 898                 && IrqType != STS_IRQ_RING_STATUS)
 899         {
 900                 return (1);     /* SSB not involved. */
 901         }
 902
 903         /* Note: All fields of the SSB have been set to all ones (-1) after it
 904          * has last been used by the software (see DriverIsr()).
 905          *
 906          * Check if the affected SSB fields are still unchanged.
 907          */
 908
 909         if(ssb->STS == (unsigned short) -1)
 910                 return (0);     /* Command field not yet available. */
 911         if(IrqType == STS_IRQ_COMMAND_STATUS)
 912                 return (1);     /* Status fields not always affected. */
 913         if(ssb->Parm[0] == (unsigned short) -1)
 914                 return (0);     /* Status 1 field not yet available. */
 915         if(IrqType == STS_IRQ_RING_STATUS)
 916                 return (1);     /* Status 2 & 3 fields not affected. */
 917
 918         /* Note: At this point, the interrupt is either TRANSMIT or RECEIVE. */
 919         if(ssb->Parm[1] == (unsigned short) -1)
 920                 return (0);     /* Status 2 field not yet available. */
 921         if(ssb->Parm[2] == (unsigned short) -1)
 922                 return (0);     /* Status 3 field not yet available. */
 923
 924         return (1);     /* All SSB fields have been written by the adapter. */
 925 }
 926
 927 /*
 928  * Evaluates the command results status in the SSB status field.
 929  */
 930 static void tms380tr_cmd_status_irq(struct net_device *dev)
 931 {
 932         struct net_local *tp = netdev_priv(dev);
 933         unsigned short ssb_cmd, ssb_parm_0;
 934         unsigned short ssb_parm_1;
 935         char *open_err = "Open error -";
 936         char *code_err = "Open code -";
 937
 938         /* Copy the ssb values to local variables */
 939         ssb_cmd    = tp->ssb.STS;
 940         ssb_parm_0 = tp->ssb.Parm[0];
 941         ssb_parm_1 = tp->ssb.Parm[1];
 942
 943         if(ssb_cmd == OPEN)
 944         {
 945                 tp->Sleeping = 0;
 946                 if(!tp->ReOpenInProgress)
 947                         wake_up_interruptible(&tp->wait_for_tok_int);
 948
 949                 tp->OpenCommandIssued = 0;
 950                 tp->ScbInUse = 0;
 951
 952                 if((ssb_parm_0 & 0x00FF) == GOOD_COMPLETION)
 953                 {
 954                         /* Success, the adapter is open. */
 955                         tp->LobeWireFaultLogged = 0;
 956                         tp->AdapterOpenFlag     = 1;
 957                         tp->AdapterVirtOpenFlag = 1;
 958                         tp->TransmitCommandActive = 0;
 959                         tms380tr_exec_cmd(dev, OC_TRANSMIT);
 960                         tms380tr_exec_cmd(dev, OC_RECEIVE);
 961
 962                         if(tp->ReOpenInProgress)
 963                                 tp->ReOpenInProgress = 0;
 964
 965                         return;
 966                 }
 967                 else    /* The adapter did not open. */
 968                 {
 969                         if(ssb_parm_0 & NODE_ADDR_ERROR)
 970                                 printk(KERN_INFO "%s: Node address error\n",
 971                                         dev->name);
 972                         if(ssb_parm_0 & LIST_SIZE_ERROR)
 973                                 printk(KERN_INFO "%s: List size error\n",
 974                                         dev->name);
 975                         if(ssb_parm_0 & BUF_SIZE_ERROR)
 976                                 printk(KERN_INFO "%s: Buffer size error\n",
 977                                         dev->name);
 978                         if(ssb_parm_0 & TX_BUF_COUNT_ERROR)
 979                                 printk(KERN_INFO "%s: Tx buffer count error\n",
 980                                         dev->name);
 981                         if(ssb_parm_0 & INVALID_OPEN_OPTION)
 982                                 printk(KERN_INFO "%s: Invalid open option\n",
 983                                         dev->name);
 984                         if(ssb_parm_0 & OPEN_ERROR)
 985                         {
 986                                 /* Show the open phase. */
 987                                 switch(ssb_parm_0 & OPEN_PHASES_MASK)
 988                                 {
 989                                         case LOBE_MEDIA_TEST:
 990                                                 if(!tp->LobeWireFaultLogged)
 991                                                 {
 992                                                         tp->LobeWireFaultLogged = 1;
 993                                                         printk(KERN_INFO "%s: %s Lobe wire fault (check cable !).\n", dev->name, open_err);
 994                                                 }
 995                                                 tp->ReOpenInProgress    = 1;
 996                                                 tp->AdapterOpenFlag     = 0;
 997                                                 tp->AdapterVirtOpenFlag = 1;
 998                                                 tms380tr_open_adapter(dev);
 999                                                 return;
1000
1001                                         case PHYSICAL_INSERTION:
1002                                                 printk(KERN_INFO "%s: %s Physical insertion.\n", dev->name, open_err);
1003                                                 break;
1004
1005                                         case ADDRESS_VERIFICATION:
1006                                                 printk(KERN_INFO "%s: %s Address verification.\n", dev->name, open_err);
1007                                                 break;
1008
1009                                         case PARTICIPATION_IN_RING_POLL:
1010                                                 printk(KERN_INFO "%s: %s Participation in ring poll.\n", dev->name, open_err);
1011                                                 break;
1012
1013                                         case REQUEST_INITIALISATION:
1014                                                 printk(KERN_INFO "%s: %s Request initialisation.\n", dev->name, open_err);
1015                                                 break;
1016
1017                                         case FULLDUPLEX_CHECK:
1018                                                 printk(KERN_INFO "%s: %s Full duplex check.\n", dev->name, open_err);
1019                                                 break;
1020
1021                                         default:
1022                                                 printk(KERN_INFO "%s: %s Unknown open phase\n", dev->name, open_err);
1023                                                 break;
1024                                 }
1025
1026                                 /* Show the open errors. */
1027                                 switch(ssb_parm_0 & OPEN_ERROR_CODES_MASK)
1028                                 {
1029                                         case OPEN_FUNCTION_FAILURE:
1030                                                 printk(KERN_INFO "%s: %s OPEN_FUNCTION_FAILURE", dev->name, code_err);
1031                                                 tp->LastOpenStatus =
1032                                                         OPEN_FUNCTION_FAILURE;
1033                                                 break;
1034
1035                                         case OPEN_SIGNAL_LOSS:
1036                                                 printk(KERN_INFO "%s: %s OPEN_SIGNAL_LOSS\n", dev->name, code_err);
1037                                                 tp->LastOpenStatus =
1038                                                         OPEN_SIGNAL_LOSS;
1039                                                 break;
1040
1041                                         case OPEN_TIMEOUT:
1042                                                 printk(KERN_INFO "%s: %s OPEN_TIMEOUT\n", dev->name, code_err);
1043                                                 tp->LastOpenStatus =
1044                                                         OPEN_TIMEOUT;
1045                                                 break;
1046
1047                                         case OPEN_RING_FAILURE:
1048                                                 printk(KERN_INFO "%s: %s OPEN_RING_FAILURE\n", dev->name, code_err);
1049                                                 tp->LastOpenStatus =
1050                                                         OPEN_RING_FAILURE;
1051                                                 break;
1052
1053                                         case OPEN_RING_BEACONING:
1054                                                 printk(KERN_INFO "%s: %s OPEN_RING_BEACONING\n", dev->name, code_err);
1055                                                 tp->LastOpenStatus =
1056                                                         OPEN_RING_BEACONING;
1057                                                 break;
1058
1059                                         case OPEN_DUPLICATE_NODEADDR:
1060                                                 printk(KERN_INFO "%s: %s OPEN_DUPLICATE_NODEADDR\n", dev->name, code_err);
1061                                                 tp->LastOpenStatus =
1062                                                         OPEN_DUPLICATE_NODEADDR;
1063                                                 break;
1064
1065                                         case OPEN_REQUEST_INIT:
1066                                                 printk(KERN_INFO "%s: %s OPEN_REQUEST_INIT\n", dev->name, code_err);
1067                                                 tp->LastOpenStatus =
1068                                                         OPEN_REQUEST_INIT;
1069                                                 break;
1070
1071                                         case OPEN_REMOVE_RECEIVED:
1072                                                 printk(KERN_INFO "%s: %s OPEN_REMOVE_RECEIVED", dev->name, code_err);
1073                                                 tp->LastOpenStatus =
1074                                                         OPEN_REMOVE_RECEIVED;
1075                                                 break;
1076
1077                                         case OPEN_FULLDUPLEX_SET:
1078                                                 printk(KERN_INFO "%s: %s OPEN_FULLDUPLEX_SET\n", dev->name, code_err);
1079                                                 tp->LastOpenStatus =
1080                                                         OPEN_FULLDUPLEX_SET;
1081                                                 break;
1082
1083                                         default:
1084                                                 printk(KERN_INFO "%s: %s Unknown open err code", dev->name, code_err);
1085                                                 tp->LastOpenStatus =
1086                                                         OPEN_FUNCTION_FAILURE;
1087                                                 break;
1088                                 }
1089                         }
1090
1091                         tp->AdapterOpenFlag     = 0;
1092                         tp->AdapterVirtOpenFlag = 0;
1093
1094                         return;
1095                 }
1096         }
1097         else
1098         {
1099                 if(ssb_cmd != READ_ERROR_LOG)
1100                         return;
1101
1102                 /* Add values from the error log table to the MAC
1103                  * statistics counters and update the errorlogtable
1104                  * memory.
1105                  */
1106                 tp->MacStat.line_errors += tp->errorlogtable.Line_Error;
1107                 tp->MacStat.burst_errors += tp->errorlogtable.Burst_Error;
1108                 tp->MacStat.A_C_errors += tp->errorlogtable.ARI_FCI_Error;
1109                 tp->MacStat.lost_frames += tp->errorlogtable.Lost_Frame_Error;
1110                 tp->MacStat.recv_congest_count += tp->errorlogtable.Rx_Congest_Error;
1111                 tp->MacStat.rx_errors += tp->errorlogtable.Rx_Congest_Error;
1112                 tp->MacStat.frame_copied_errors += tp->errorlogtable.Frame_Copied_Error;
1113                 tp->MacStat.token_errors += tp->errorlogtable.Token_Error;
1114                 tp->MacStat.dummy1 += tp->errorlogtable.DMA_Bus_Error;
1115                 tp->MacStat.dummy1 += tp->errorlogtable.DMA_Parity_Error;
1116                 tp->MacStat.abort_delimiters += tp->errorlogtable.AbortDelimeters;
1117                 tp->MacStat.frequency_errors += tp->errorlogtable.Frequency_Error;
1118                 tp->MacStat.internal_errors += tp->errorlogtable.Internal_Error;
1119         }
1120
1121         return;
1122 }
1123
1124 /*
1125  * The inverse routine to tms380tr_open().
1126  */
1127 int tms380tr_close(struct net_device *dev)
1128 {
1129         struct net_local *tp = netdev_priv(dev);
1130         netif_stop_queue(dev);
1131
1132         del_timer(&tp->timer);
1133
1134         /* Flush the Tx and disable Rx here. */
1135
1136         tp->HaltInProgress      = 1;
1137         tms380tr_exec_cmd(dev, OC_CLOSE);
1138         tp->timer.expires       = jiffies + 1*HZ;
1139         tp->timer.function      = tms380tr_timer_end_wait;
1140         tp->timer.data          = (unsigned long)dev;
1141         add_timer(&tp->timer);
1142
1143         tms380tr_enable_interrupts(dev);
1144
1145         tp->Sleeping = 1;
1146         interruptible_sleep_on(&tp->wait_for_tok_int);
1147         tp->TransmitCommandActive = 0;
1148
1149         del_timer(&tp->timer);
1150         tms380tr_disable_interrupts(dev);
1151
1152 #ifdef CONFIG_ISA
1153         if(dev->dma > 0)
1154         {
1155                 unsigned long flags=claim_dma_lock();
1156                 disable_dma(dev->dma);
1157                 release_dma_lock(flags);
1158         }
1159 #endif
1160
1161         SIFWRITEW(0xFF00, SIFCMD);
1162 #if 0
1163         if(dev->dma > 0) /* what the? */
1164                 SIFWRITEB(0xff, POSREG);
1165 #endif
1166         tms380tr_cancel_tx_queue(tp);
1167
1168         return (0);
1169 }
1170
1171 /*
1172  * Get the current statistics. This may be called with the card open
1173  * or closed.
1174  */
1175 static struct net_device_stats *tms380tr_get_stats(struct net_device *dev)
1176 {
1177         struct net_local *tp = netdev_priv(dev);
1178
1179         return ((struct net_device_stats *)&tp->MacStat);
1180 }
1181
1182 /*
1183  * Set or clear the multicast filter for this adapter.
1184  */
1185 static void tms380tr_set_multicast_list(struct net_device *dev)
1186 {
1187         struct net_local *tp = netdev_priv(dev);
1188         unsigned int OpenOptions;
1189
1190         OpenOptions = tp->ocpl.OPENOptions &
1191                 ~(PASS_ADAPTER_MAC_FRAMES
1192                   | PASS_ATTENTION_FRAMES
1193                   | PASS_BEACON_MAC_FRAMES
1194                   | COPY_ALL_MAC_FRAMES
1195                   | COPY_ALL_NON_MAC_FRAMES);
1196
1197         tp->ocpl.FunctAddr = 0;
1198
1199         if(dev->flags & IFF_PROMISC)
1200                 /* Enable promiscuous mode */
1201                 OpenOptions |= COPY_ALL_NON_MAC_FRAMES |
1202                         COPY_ALL_MAC_FRAMES;
1203         else
1204         {
1205                 if(dev->flags & IFF_ALLMULTI)
1206                 {
1207                         /* Disable promiscuous mode, use normal mode. */
1208                         tp->ocpl.FunctAddr = 0xFFFFFFFF;
1209                 }
1210                 else
1211                 {
1212                         int i;
1213                         struct dev_mc_list *mclist = dev->mc_list;
1214                         for (i=0; i< dev->mc_count; i++)
1215                         {
1216                                 ((char *)(&tp->ocpl.FunctAddr))[0] |=
1217                                         mclist->dmi_addr[2];
1218                                 ((char *)(&tp->ocpl.FunctAddr))[1] |=
1219                                         mclist->dmi_addr[3];
1220                                 ((char *)(&tp->ocpl.FunctAddr))[2] |=
1221                                         mclist->dmi_addr[4];
1222                                 ((char *)(&tp->ocpl.FunctAddr))[3] |=
1223                                         mclist->dmi_addr[5];
1224                                 mclist = mclist->next;
1225                         }
1226                 }
1227                 tms380tr_exec_cmd(dev, OC_SET_FUNCT_ADDR);
1228         }
1229
1230         tp->ocpl.OPENOptions = OpenOptions;
1231         tms380tr_exec_cmd(dev, OC_MODIFY_OPEN_PARMS);
1232         return;
1233 }
1234
1235 /*
1236  * Wait for some time (microseconds)
1237  */
1238 void tms380tr_wait(unsigned long time)
1239 {
1240 #if 0
1241         long tmp;
1242
1243         tmp = jiffies + time/(1000000/HZ);
1244         do {
1245                 tmp = schedule_timeout_interruptible(tmp);
1246         } while(time_after(tmp, jiffies));
1247 #else
1248         udelay(time);
1249 #endif
1250         return;
1251 }
1252
1253 /*
1254  * Write a command value to the SIFCMD register
1255  */
1256 static void tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue)
1257 {
1258         unsigned short cmd;
1259         unsigned short SifStsValue;
1260         unsigned long loop_counter;
1261
1262         WriteValue = ((WriteValue ^ CMD_SYSTEM_IRQ) | CMD_INTERRUPT_ADAPTER);
1263         cmd = (unsigned short)WriteValue;
1264         loop_counter = 0,5 * 800000;
1265         do {
1266                 SifStsValue = SIFREADW(SIFSTS);
1267         } while((SifStsValue & CMD_INTERRUPT_ADAPTER) && loop_counter--);
1268         SIFWRITEW(cmd, SIFCMD);
1269
1270         return;
1271 }
1272
1273 /*
1274  * Processes adapter hardware reset, halts adapter and downloads firmware,
1275  * clears the halt bit.
1276  */
1277 static int tms380tr_reset_adapter(struct net_device *dev)
1278 {
1279         struct net_local *tp = netdev_priv(dev);
1280         unsigned short *fw_ptr;
1281         unsigned short count, c, count2;
1282         const struct firmware *fw_entry = NULL;
1283
1284         if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) {
1285                 printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n",
1286                         dev->name, "tms380tr.bin");
1287                 return (-1);
1288         }
1289
1290         fw_ptr = (unsigned short *)fw_entry->data;
1291         count2 = fw_entry->size / 2;
1292
1293         /* Hardware adapter reset */
1294         SIFWRITEW(ACL_ARESET, SIFACL);
1295         tms380tr_wait(40);
1296
1297         c = SIFREADW(SIFACL);
1298         tms380tr_wait(20);
1299
1300         if(dev->dma == 0)       /* For PCI adapters */
1301         {
1302                 c &= ~(ACL_NSELOUT0 | ACL_NSELOUT1);    /* Clear bits */
1303                 if(tp->setnselout)
1304                   c |= (*tp->setnselout)(dev);
1305         }
1306
1307         /* In case a command is pending - forget it */
1308         tp->ScbInUse = 0;
1309
1310         c &= ~ACL_ARESET;               /* Clear adapter reset bit */
1311         c |=  ACL_CPHALT;               /* Halt adapter CPU, allow download */
1312         c |= ACL_BOOT;
1313         c |= ACL_SINTEN;
1314         c &= ~ACL_PSDMAEN;              /* Clear pseudo dma bit */
1315         SIFWRITEW(c, SIFACL);
1316         tms380tr_wait(40);
1317
1318         count = 0;
1319         /* Download firmware via DIO interface: */
1320         do {
1321                 if (count2 < 3) continue;
1322
1323                 /* Download first address part */
1324                 SIFWRITEW(*fw_ptr, SIFADX);
1325                 fw_ptr++;
1326                 count2--;
1327                 /* Download second address part */
1328                 SIFWRITEW(*fw_ptr, SIFADD);
1329                 fw_ptr++;
1330                 count2--;
1331
1332                 if((count = *fw_ptr) != 0)      /* Load loop counter */
1333                 {
1334                         fw_ptr++;       /* Download block data */
1335                         count2--;
1336                         if (count > count2) continue;
1337
1338                         for(; count > 0; count--)
1339                         {
1340                                 SIFWRITEW(*fw_ptr, SIFINC);
1341                                 fw_ptr++;
1342                                 count2--;
1343                         }
1344                 }
1345                 else    /* Stop, if last block downloaded */
1346                 {
1347                         c = SIFREADW(SIFACL);
1348                         c &= (~ACL_CPHALT | ACL_SINTEN);
1349
1350                         /* Clear CPHALT and start BUD */
1351                         SIFWRITEW(c, SIFACL);
1352                         if (fw_entry)
1353                                 release_firmware(fw_entry);
1354                         return (1);
1355                 }
1356         } while(count == 0);
1357
1358         if (fw_entry)
1359                 release_firmware(fw_entry);
1360         printk(KERN_INFO "%s: Adapter Download Failed\n", dev->name);
1361         return (-1);
1362 }
1363
1364 /*
1365  * Starts bring up diagnostics of token ring adapter and evaluates
1366  * diagnostic results.
1367  */
1368 static int tms380tr_bringup_diags(struct net_device *dev)
1369 {
1370         int loop_cnt, retry_cnt;
1371         unsigned short Status;
1372
1373         tms380tr_wait(HALF_SECOND);
1374         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1375         tms380tr_wait(HALF_SECOND);
1376
1377         retry_cnt = BUD_MAX_RETRIES;    /* maximal number of retrys */
1378
1379         do {
1380                 retry_cnt--;
1381                 if(tms380tr_debug > 3)
1382                         printk(KERN_DEBUG "BUD-Status: ");
1383                 loop_cnt = BUD_MAX_LOOPCNT;     /* maximum: three seconds*/
1384                 do {                    /* Inspect BUD results */
1385                         loop_cnt--;
1386                         tms380tr_wait(HALF_SECOND);
1387                         Status = SIFREADW(SIFSTS);
1388                         Status &= STS_MASK;
1389
1390                         if(tms380tr_debug > 3)
1391                                 printk(KERN_DEBUG " %04X \n", Status);
1392                         /* BUD successfully completed */
1393                         if(Status == STS_INITIALIZE)
1394                                 return (1);
1395                 /* Unrecoverable hardware error, BUD not completed? */
1396                 } while((loop_cnt > 0) && ((Status & (STS_ERROR | STS_TEST))
1397                         != (STS_ERROR | STS_TEST)));
1398
1399                 /* Error preventing completion of BUD */
1400                 if(retry_cnt > 0)
1401                 {
1402                         printk(KERN_INFO "%s: Adapter Software Reset.\n",
1403                                 dev->name);
1404                         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1405                         tms380tr_wait(HALF_SECOND);
1406                 }
1407         } while(retry_cnt > 0);
1408
1409         Status = SIFREADW(SIFSTS);
1410
1411         printk(KERN_INFO "%s: Hardware error\n", dev->name);
1412         /* Hardware error occurred! */
1413         Status &= 0x001f;
1414         if (Status & 0x0010)
1415                 printk(KERN_INFO "%s: BUD Error: Timeout\n", dev->name);
1416         else if ((Status & 0x000f) > 6)
1417                 printk(KERN_INFO "%s: BUD Error: Illegal Failure\n", dev->name);
1418         else
1419                 printk(KERN_INFO "%s: Bring Up Diagnostics Error (%04X) occurred\n", dev->name, Status & 0x000f);
1420
1421         return (-1);
1422 }
1423
1424 /*
1425  * Copy initialisation data to adapter memory, beginning at address
1426  * 1:0A00; Starting DMA test and evaluating result bits.
1427  */
1428 static int tms380tr_init_adapter(struct net_device *dev)
1429 {
1430         struct net_local *tp = netdev_priv(dev);
1431
1432         const unsigned char SCB_Test[6] = {0x00, 0x00, 0xC1, 0xE2, 0xD4, 0x8B};
1433         const unsigned char SSB_Test[8] = {0xFF, 0xFF, 0xD1, 0xD7,
1434                                                 0xC5, 0xD9, 0xC3, 0xD4};
1435         void *ptr = (void *)&tp->ipb;
1436         unsigned short *ipb_ptr = (unsigned short *)ptr;
1437         unsigned char *cb_ptr = (unsigned char *) &tp->scb;
1438         unsigned char *sb_ptr = (unsigned char *) &tp->ssb;
1439         unsigned short Status;
1440         int i, loop_cnt, retry_cnt;
1441
1442         /* Normalize: byte order low/high, word order high/low! (only IPB!) */
1443         tp->ipb.SCB_Addr = SWAPW(((char *)&tp->scb - (char *)tp) + tp->dmabuffer);
1444         tp->ipb.SSB_Addr = SWAPW(((char *)&tp->ssb - (char *)tp) + tp->dmabuffer);
1445
1446         if(tms380tr_debug > 3)
1447         {
1448                 printk(KERN_DEBUG "%s: buffer (real): %lx\n", dev->name, (long) &tp->scb);
1449                 printk(KERN_DEBUG "%s: buffer (virt): %lx\n", dev->name, (long) ((char *)&tp->scb - (char *)tp) + (long) tp->dmabuffer);
1450                 printk(KERN_DEBUG "%s: buffer (DMA) : %lx\n", dev->name, (long) tp->dmabuffer);
1451                 printk(KERN_DEBUG "%s: buffer (tp)  : %lx\n", dev->name, (long) tp);
1452         }
1453         /* Maximum: three initialization retries */
1454         retry_cnt = INIT_MAX_RETRIES;
1455
1456         do {
1457                 retry_cnt--;
1458
1459                 /* Transfer initialization block */
1460                 SIFWRITEW(0x0001, SIFADX);
1461
1462                 /* To address 0001:0A00 of adapter RAM */
1463                 SIFWRITEW(0x0A00, SIFADD);
1464
1465                 /* Write 11 words to adapter RAM */
1466                 for(i = 0; i < 11; i++)
1467                         SIFWRITEW(ipb_ptr[i], SIFINC);
1468
1469                 /* Execute SCB adapter command */
1470                 tms380tr_exec_sifcmd(dev, CMD_EXECUTE);
1471
1472                 loop_cnt = INIT_MAX_LOOPCNT;    /* Maximum: 11 seconds */
1473
1474                 /* While remaining retries, no error and not completed */
1475                 do {
1476                         Status = 0;
1477                         loop_cnt--;
1478                         tms380tr_wait(HALF_SECOND);
1479
1480                         /* Mask interesting status bits */
1481                         Status = SIFREADW(SIFSTS);
1482                         Status &= STS_MASK;
1483                 } while(((Status &(STS_INITIALIZE | STS_ERROR | STS_TEST)) != 0)
1484                         && ((Status & STS_ERROR) == 0) && (loop_cnt != 0));
1485
1486                 if((Status & (STS_INITIALIZE | STS_ERROR | STS_TEST)) == 0)
1487                 {
1488                         /* Initialization completed without error */
1489                         i = 0;
1490                         do {    /* Test if contents of SCB is valid */
1491                                 if(SCB_Test[i] != *(cb_ptr + i))
1492                                 {
1493                                         printk(KERN_INFO "%s: DMA failed\n", dev->name);
1494                                         /* DMA data error: wrong data in SCB */
1495                                         return (-1);
1496                                 }
1497                                 i++;
1498                         } while(i < 6);
1499
1500                         i = 0;
1501                         do {    /* Test if contents of SSB is valid */
1502                                 if(SSB_Test[i] != *(sb_ptr + i))
1503                                         /* DMA data error: wrong data in SSB */
1504                                         return (-1);
1505                                 i++;
1506                         } while (i < 8);
1507
1508                         return (1);     /* Adapter successfully initialized */
1509                 }
1510                 else
1511                 {
1512                         if((Status & STS_ERROR) != 0)
1513                         {
1514                                 /* Initialization error occurred */
1515                                 Status = SIFREADW(SIFSTS);
1516                                 Status &= STS_ERROR_MASK;
1517                                 /* ShowInitialisationErrorCode(Status); */
1518                                 printk(KERN_INFO "%s: Status error: %d\n", dev->name, Status);
1519                                 return (-1); /* Unrecoverable error */
1520                         }
1521                         else
1522                         {
1523                                 if(retry_cnt > 0)
1524                                 {
1525                                         /* Reset adapter and try init again */
1526                                         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1527                                         tms380tr_wait(HALF_SECOND);
1528                                 }
1529                         }
1530                 }
1531         } while(retry_cnt > 0);
1532
1533         printk(KERN_INFO "%s: Retry exceeded\n", dev->name);
1534         return (-1);
1535 }
1536
1537 /*
1538  * Check for outstanding commands in command queue and tries to execute
1539  * command immediately. Corresponding command flag in command queue is cleared.
1540  */
1541 static void tms380tr_chk_outstanding_cmds(struct net_device *dev)
1542 {
1543         struct net_local *tp = netdev_priv(dev);
1544         unsigned long Addr = 0;
1545
1546         if(tp->CMDqueue == 0)
1547                 return;         /* No command execution */
1548
1549         /* If SCB in use: no command */
1550         if(tp->ScbInUse == 1)
1551                 return;
1552
1553         /* Check if adapter is opened, avoiding COMMAND_REJECT
1554          * interrupt by the adapter!
1555          */
1556         if(tp->AdapterOpenFlag == 0)
1557         {
1558                 if(tp->CMDqueue & OC_OPEN)
1559                 {
1560                         /* Execute OPEN command */
1561                         tp->CMDqueue ^= OC_OPEN;
1562
1563                         Addr = htonl(((char *)&tp->ocpl - (char *)tp) + tp->dmabuffer);
1564                         tp->scb.Parm[0] = LOWORD(Addr);
1565                         tp->scb.Parm[1] = HIWORD(Addr);
1566                         tp->scb.CMD = OPEN;
1567                 }
1568                 else
1569                         /* No OPEN command queued, but adapter closed. Note:
1570                          * We'll try to re-open the adapter in DriverPoll()
1571                          */
1572                         return;         /* No adapter command issued */
1573         }
1574         else
1575         {
1576                 /* Adapter is open; evaluate command queue: try to execute
1577                  * outstanding commands (depending on priority!) CLOSE
1578                  * command queued
1579                  */
1580                 if(tp->CMDqueue & OC_CLOSE)
1581                 {
1582                         tp->CMDqueue ^= OC_CLOSE;
1583                         tp->AdapterOpenFlag = 0;
1584                         tp->scb.Parm[0] = 0; /* Parm[0], Parm[1] are ignored */
1585                         tp->scb.Parm[1] = 0; /* but should be set to zero! */
1586                         tp->scb.CMD = CLOSE;
1587                         if(!tp->HaltInProgress)
1588                                 tp->CMDqueue |= OC_OPEN; /* re-open adapter */
1589                         else
1590                                 tp->CMDqueue = 0;       /* no more commands */
1591                 }
1592                 else
1593                 {
1594                         if(tp->CMDqueue & OC_RECEIVE)
1595                         {
1596                                 tp->CMDqueue ^= OC_RECEIVE;
1597                                 Addr = htonl(((char *)tp->RplHead - (char *)tp) + tp->dmabuffer);
1598                                 tp->scb.Parm[0] = LOWORD(Addr);
1599                                 tp->scb.Parm[1] = HIWORD(Addr);
1600                                 tp->scb.CMD = RECEIVE;
1601                         }
1602                         else
1603                         {
1604                                 if(tp->CMDqueue & OC_TRANSMIT_HALT)
1605                                 {
1606                                         /* NOTE: TRANSMIT.HALT must be checked
1607                                          * before TRANSMIT.
1608                                          */
1609                                         tp->CMDqueue ^= OC_TRANSMIT_HALT;
1610                                         tp->scb.CMD = TRANSMIT_HALT;
1611
1612                                         /* Parm[0] and Parm[1] are ignored
1613                                          * but should be set to zero!
1614                                          */
1615                                         tp->scb.Parm[0] = 0;
1616                                         tp->scb.Parm[1] = 0;
1617                                 }
1618                                 else
1619                                 {
1620                                         if(tp->CMDqueue & OC_TRANSMIT)
1621                                         {
1622                                                 /* NOTE: TRANSMIT must be
1623                                                  * checked after TRANSMIT.HALT
1624                                                  */
1625                                                 if(tp->TransmitCommandActive)
1626                                                 {
1627                                                         if(!tp->TransmitHaltScheduled)
1628                                                         {
1629                                                                 tp->TransmitHaltScheduled = 1;
1630                                                                 tms380tr_exec_cmd(dev, OC_TRANSMIT_HALT) ;
1631                                                         }
1632                                                         tp->TransmitCommandActive = 0;
1633                                                         return;
1634                                                 }
1635
1636                                                 tp->CMDqueue ^= OC_TRANSMIT;
1637                                                 tms380tr_cancel_tx_queue(tp);
1638                                                 Addr = htonl(((char *)tp->TplBusy - (char *)tp) + tp->dmabuffer);
1639                                                 tp->scb.Parm[0] = LOWORD(Addr);
1640                                                 tp->scb.Parm[1] = HIWORD(Addr);
1641                                                 tp->scb.CMD = TRANSMIT;
1642                                                 tp->TransmitCommandActive = 1;
1643                                         }
1644                                         else
1645                                         {
1646                                                 if(tp->CMDqueue & OC_MODIFY_OPEN_PARMS)
1647                                                 {
1648                                                         tp->CMDqueue ^= OC_MODIFY_OPEN_PARMS;
1649                                                         tp->scb.Parm[0] = tp->ocpl.OPENOptions; /* new OPEN options*/
1650                                                         tp->scb.Parm[0] |= ENABLE_FULL_DUPLEX_SELECTION;
1651                                                         tp->scb.Parm[1] = 0; /* is ignored but should be zero */
1652                                                         tp->scb.CMD = MODIFY_OPEN_PARMS;
1653                                                 }
1654                                                 else
1655                                                 {
1656                                                         if(tp->CMDqueue & OC_SET_FUNCT_ADDR)
1657                                                         {
1658                                                                 tp->CMDqueue ^= OC_SET_FUNCT_ADDR;
1659                                                                 tp->scb.Parm[0] = LOWORD(tp->ocpl.FunctAddr);
1660                                                                 tp->scb.Parm[1] = HIWORD(tp->ocpl.FunctAddr);
1661                                                                 tp->scb.CMD = SET_FUNCT_ADDR;
1662                                                         }
1663                                                         else
1664                                                         {
1665                                                                 if(tp->CMDqueue & OC_SET_GROUP_ADDR)
1666                                                                 {
1667                                                                         tp->CMDqueue ^= OC_SET_GROUP_ADDR;
1668                                                                         tp->scb.Parm[0] = LOWORD(tp->ocpl.GroupAddr);
1669                                                                         tp->scb.Parm[1] = HIWORD(tp->ocpl.GroupAddr);
1670                                                                         tp->scb.CMD = SET_GROUP_ADDR;
1671                                                                 }
1672                                                                 else
1673                                                                 {
1674                                                                         if(tp->CMDqueue & OC_READ_ERROR_LOG)
1675                                                                         {
1676                                                                                 tp->CMDqueue ^= OC_READ_ERROR_LOG;
1677                                                                                 Addr = htonl(((char *)&tp->errorlogtable - (char *)tp) + tp->dmabuffer);
1678                                                                                 tp->scb.Parm[0] = LOWORD(Addr);
1679                                                                                 tp->scb.Parm[1] = HIWORD(Addr);
1680                                                                                 tp->scb.CMD = READ_ERROR_LOG;
1681                                                                         }
1682                                                                         else
1683                                                                         {
1684                                                                                 printk(KERN_WARNING "CheckForOutstandingCommand: unknown Command\n");
1685                                                                                 tp->CMDqueue = 0;
1686                                                                                 return;
1687                                                                         }
1688                                                                 }
1689                                                         }
1690                                                 }
1691                                         }
1692                                 }
1693                         }
1694                 }
1695         }
1696
1697         tp->ScbInUse = 1;       /* Set semaphore: SCB in use. */
1698
1699         /* Execute SCB and generate IRQ when done. */
1700         tms380tr_exec_sifcmd(dev, CMD_EXECUTE | CMD_SCB_REQUEST);
1701
1702         return;
1703 }
1704
1705 /*
1706  * IRQ conditions: signal loss on the ring, transmit or receive of beacon
1707  * frames (disabled if bit 1 of OPEN option is set); report error MAC
1708  * frame transmit (disabled if bit 2 of OPEN option is set); open or short
1709  * circuit fault on the lobe is detected; remove MAC frame received;
1710  * error counter overflow (255); opened adapter is the only station in ring.
1711  * After some of the IRQs the adapter is closed!
1712  */
1713 static void tms380tr_ring_status_irq(struct net_device *dev)
1714 {
1715         struct net_local *tp = netdev_priv(dev);
1716
1717         tp->CurrentRingStatus = be16_to_cpu((unsigned short)tp->ssb.Parm[0]);
1718
1719         /* First: fill up statistics */
1720         if(tp->ssb.Parm[0] & SIGNAL_LOSS)
1721         {
1722                 printk(KERN_INFO "%s: Signal Loss\n", dev->name);
1723                 tp->MacStat.line_errors++;
1724         }
1725
1726         /* Adapter is closed, but initialized */
1727         if(tp->ssb.Parm[0] & LOBE_WIRE_FAULT)
1728         {
1729                 printk(KERN_INFO "%s: Lobe Wire Fault, Reopen Adapter\n",
1730                         dev->name);
1731                 tp->MacStat.line_errors++;
1732         }
1733
1734         if(tp->ssb.Parm[0] & RING_RECOVERY)
1735                 printk(KERN_INFO "%s: Ring Recovery\n", dev->name);
1736
1737         /* Counter overflow: read error log */
1738         if(tp->ssb.Parm[0] & COUNTER_OVERFLOW)
1739         {
1740                 printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
1741                 tms380tr_exec_cmd(dev, OC_READ_ERROR_LOG);
1742         }
1743
1744         /* Adapter is closed, but initialized */
1745         if(tp->ssb.Parm[0] & REMOVE_RECEIVED)
1746                 printk(KERN_INFO "%s: Remove Received, Reopen Adapter\n",
1747                         dev->name);
1748
1749         /* Adapter is closed, but initialized */
1750         if(tp->ssb.Parm[0] & AUTO_REMOVAL_ERROR)
1751                 printk(KERN_INFO "%s: Auto Removal Error, Reopen Adapter\n",
1752                         dev->name);
1753
1754         if(tp->ssb.Parm[0] & HARD_ERROR)
1755                 printk(KERN_INFO "%s: Hard Error\n", dev->name);
1756
1757         if(tp->ssb.Parm[0] & SOFT_ERROR)
1758                 printk(KERN_INFO "%s: Soft Error\n", dev->name);
1759
1760         if(tp->ssb.Parm[0] & TRANSMIT_BEACON)
1761                 printk(KERN_INFO "%s: Transmit Beacon\n", dev->name);
1762
1763         if(tp->ssb.Parm[0] & SINGLE_STATION)
1764                 printk(KERN_INFO "%s: Single Station\n", dev->name);
1765
1766         /* Check if adapter has been closed */
1767         if(tp->ssb.Parm[0] & ADAPTER_CLOSED)
1768         {
1769                 printk(KERN_INFO "%s: Adapter closed (Reopening),"
1770                         "CurrentRingStat %x\n",
1771                         dev->name, tp->CurrentRingStatus);
1772                 tp->AdapterOpenFlag = 0;
1773                 tms380tr_open_adapter(dev);
1774         }
1775
1776         return;
1777 }
1778
1779 /*
1780  * Issued if adapter has encountered an unrecoverable hardware
1781  * or software error.
1782  */
1783 static void tms380tr_chk_irq(struct net_device *dev)
1784 {
1785         int i;
1786         unsigned short AdapterCheckBlock[4];
1787         struct net_local *tp = netdev_priv(dev);
1788
1789         tp->AdapterOpenFlag = 0;        /* Adapter closed now */
1790
1791         /* Page number of adapter memory */
1792         SIFWRITEW(0x0001, SIFADX);
1793         /* Address offset */
1794         SIFWRITEW(CHECKADDR, SIFADR);
1795
1796         /* Reading 8 byte adapter check block. */
1797         for(i = 0; i < 4; i++)
1798                 AdapterCheckBlock[i] = SIFREADW(SIFINC);
1799
1800         if(tms380tr_debug > 3)
1801         {
1802                 printk(KERN_DEBUG "%s: AdapterCheckBlock: ", dev->name);
1803                 for (i = 0; i < 4; i++)
1804                         printk("%04X", AdapterCheckBlock[i]);
1805                 printk("\n");
1806         }
1807
1808         switch(AdapterCheckBlock[0])
1809         {
1810                 case DIO_PARITY:
1811                         printk(KERN_INFO "%s: DIO parity error\n", dev->name);
1812                         break;
1813
1814                 case DMA_READ_ABORT:
1815                         printk(KERN_INFO "%s DMA read operation aborted:\n",
1816                                 dev->name);
1817                         switch (AdapterCheckBlock[1])
1818                         {
1819                                 case 0:
1820                                         printk(KERN_INFO "Timeout\n");
1821                                         printk(KERN_INFO "Address: %04X %04X\n",
1822                                                 AdapterCheckBlock[2],
1823                                                 AdapterCheckBlock[3]);
1824                                         break;
1825
1826                                 case 1:
1827                                         printk(KERN_INFO "Parity error\n");
1828                                         printk(KERN_INFO "Address: %04X %04X\n",
1829                                                 AdapterCheckBlock[2],
1830                                                 AdapterCheckBlock[3]);
1831                                         break;
1832
1833                                 case 2:
1834                                         printk(KERN_INFO "Bus error\n");
1835                                         printk(KERN_INFO "Address: %04X %04X\n",
1836                                                 AdapterCheckBlock[2],
1837                                                 AdapterCheckBlock[3]);
1838                                         break;
1839
1840                                 default:
1841                                         printk(KERN_INFO "Unknown error.\n");
1842                                         break;
1843                         }
1844                         break;
1845
1846                 case DMA_WRITE_ABORT:
1847                         printk(KERN_INFO "%s: DMA write operation aborted: \n",
1848                                 dev->name);
1849                         switch (AdapterCheckBlock[1])
1850                         {
1851                                 case 0:
1852                                         printk(KERN_INFO "Timeout\n");
1853                                         printk(KERN_INFO "Address: %04X %04X\n",
1854                                                 AdapterCheckBlock[2],
1855                                                 AdapterCheckBlock[3]);
1856                                         break;
1857
1858                                 case 1:
1859                                         printk(KERN_INFO "Parity error\n");
1860                                         printk(KERN_INFO "Address: %04X %04X\n",
1861                                                 AdapterCheckBlock[2],
1862                                                 AdapterCheckBlock[3]);
1863                                         break;
1864
1865                                 case 2:
1866                                         printk(KERN_INFO "Bus error\n");
1867                                         printk(KERN_INFO "Address: %04X %04X\n",
1868                                                 AdapterCheckBlock[2],
1869                                                 AdapterCheckBlock[3]);
1870                                         break;
1871
1872                                 default:
1873                                         printk(KERN_INFO "Unknown error.\n");
1874                                         break;
1875                         }
1876                         break;
1877
1878                 case ILLEGAL_OP_CODE:
1879                         printk(KERN_INFO "%s: Illegal operation code in firmware\n",
1880                                 dev->name);
1881                         /* Parm[0-3]: adapter internal register R13-R15 */
1882                         break;
1883
1884                 case PARITY_ERRORS:
1885                         printk(KERN_INFO "%s: Adapter internal bus parity error\n",
1886                                 dev->name);
1887                         /* Parm[0-3]: adapter internal register R13-R15 */
1888                         break;
1889
1890                 case RAM_DATA_ERROR:
1891                         printk(KERN_INFO "%s: RAM data error\n", dev->name);
1892                         /* Parm[0-1]: MSW/LSW address of RAM location. */
1893                         break;
1894
1895                 case RAM_PARITY_ERROR:
1896                         printk(KERN_INFO "%s: RAM parity error\n", dev->name);
1897                         /* Parm[0-1]: MSW/LSW address of RAM location. */
1898                         break;
1899
1900                 case RING_UNDERRUN:
1901                         printk(KERN_INFO "%s: Internal DMA underrun detected\n",
1902                                 dev->name);
1903                         break;
1904
1905                 case INVALID_IRQ:
1906                         printk(KERN_INFO "%s: Unrecognized interrupt detected\n",
1907                                 dev->name);
1908                         /* Parm[0-3]: adapter internal register R13-R15 */
1909                         break;
1910
1911                 case INVALID_ERROR_IRQ:
1912                         printk(KERN_INFO "%s: Unrecognized error interrupt detected\n",
1913                                 dev->name);
1914                         /* Parm[0-3]: adapter internal register R13-R15 */
1915                         break;
1916
1917                 case INVALID_XOP:
1918                         printk(KERN_INFO "%s: Unrecognized XOP request detected\n",
1919                                 dev->name);
1920                         /* Parm[0-3]: adapter internal register R13-R15 */
1921                         break;
1922
1923                 default:
1924                         printk(KERN_INFO "%s: Unknown status", dev->name);
1925                         break;
1926         }
1927
1928         if(tms380tr_chipset_init(dev) == 1)
1929         {
1930                 /* Restart of firmware successful */
1931                 tp->AdapterOpenFlag = 1;
1932         }
1933
1934         return;
1935 }
1936
1937 /*
1938  * Internal adapter pointer to RAM data are copied from adapter into
1939  * host system.
1940  */
1941 static int tms380tr_read_ptr(struct net_device *dev)
1942 {
1943         struct net_local *tp = netdev_priv(dev);
1944         unsigned short adapterram;
1945
1946         tms380tr_read_ram(dev, (unsigned char *)&tp->intptrs.BurnedInAddrPtr,
1947                         ADAPTER_INT_PTRS, 16);
1948         tms380tr_read_ram(dev, (unsigned char *)&adapterram,
1949                         cpu_to_be16((unsigned short)tp->intptrs.AdapterRAMPtr), 2);
1950         return be16_to_cpu(adapterram);
1951 }
1952
1953 /*
1954  * Reads a number of bytes from adapter to system memory.
1955  */
1956 static void tms380tr_read_ram(struct net_device *dev, unsigned char *Data,
1957                                 unsigned short Address, int Length)
1958 {
1959         int i;
1960         unsigned short old_sifadx, old_sifadr, InWord;
1961
1962         /* Save the current values */
1963         old_sifadx = SIFREADW(SIFADX);
1964         old_sifadr = SIFREADW(SIFADR);
1965
1966         /* Page number of adapter memory */
1967         SIFWRITEW(0x0001, SIFADX);
1968         /* Address offset in adapter RAM */
1969         SIFWRITEW(Address, SIFADR);
1970
1971         /* Copy len byte from adapter memory to system data area. */
1972         i = 0;
1973         for(;;)
1974         {
1975                 InWord = SIFREADW(SIFINC);
1976
1977                 *(Data + i) = HIBYTE(InWord);   /* Write first byte */
1978                 if(++i == Length)               /* All is done break */
1979                         break;
1980
1981                 *(Data + i) = LOBYTE(InWord);   /* Write second byte */
1982                 if (++i == Length)              /* All is done break */
1983                         break;
1984         }
1985
1986         /* Restore original values */
1987         SIFWRITEW(old_sifadx, SIFADX);
1988         SIFWRITEW(old_sifadr, SIFADR);
1989
1990         return;
1991 }
1992
1993 /*
1994  * Cancel all queued packets in the transmission queue.
1995  */
1996 static void tms380tr_cancel_tx_queue(struct net_local* tp)
1997 {
1998         TPL *tpl;
1999
2000         /*
2001          * NOTE: There must not be an active TRANSMIT command pending, when
2002          * this function is called.
2003          */
2004         if(tp->TransmitCommandActive)
2005                 return;
2006
2007         for(;;)
2008         {
2009                 tpl = tp->TplBusy;
2010                 if(!tpl->BusyFlag)
2011                         break;
2012                 /* "Remove" TPL from busy list. */
2013                 tp->TplBusy = tpl->NextTPLPtr;
2014                 tms380tr_write_tpl_status(tpl, 0);      /* Clear VALID bit */
2015                 tpl->BusyFlag = 0;              /* "free" TPL */
2016
2017                 printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl);
2018                 if (tpl->DMABuff)
2019                         dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
2020                 dev_kfree_skb_any(tpl->Skb);
2021         }
2022
2023         return;
2024 }
2025
2026 /*
2027  * This function is called whenever a transmit interrupt is generated by the
2028  * adapter. For a command complete interrupt, it is checked if we have to
2029  * issue a new transmit command or not.
2030  */
2031 static void tms380tr_tx_status_irq(struct net_device *dev)
2032 {
2033         struct net_local *tp = netdev_priv(dev);
2034         unsigned char HighByte, HighAc, LowAc;
2035         TPL *tpl;
2036
2037         /* NOTE: At this point the SSB from TRANSMIT STATUS is no longer
2038          * available, because the CLEAR SSB command has already been issued.
2039          *
2040          * Process all complete transmissions.
2041          */
2042
2043         for(;;)
2044         {
2045                 tpl = tp->TplBusy;
2046                 if(!tpl->BusyFlag || (tpl->Status
2047                         & (TX_VALID | TX_FRAME_COMPLETE))
2048                         != TX_FRAME_COMPLETE)
2049                 {
2050                         break;
2051                 }
2052
2053                 /* "Remove" TPL from busy list. */
2054                 tp->TplBusy = tpl->NextTPLPtr ;
2055
2056                 /* Check the transmit status field only for directed frames*/
2057                 if(DIRECTED_FRAME(tpl) && (tpl->Status & TX_ERROR) == 0)
2058                 {
2059                         HighByte = GET_TRANSMIT_STATUS_HIGH_BYTE(tpl->Status);
2060                         HighAc   = GET_FRAME_STATUS_HIGH_AC(HighByte);
2061                         LowAc    = GET_FRAME_STATUS_LOW_AC(HighByte);
2062
2063                         if((HighAc != LowAc) || (HighAc == AC_NOT_RECOGNIZED))
2064                         {
2065                                 printk(KERN_DEBUG "%s: (DA=%08lX not recognized)\n",
2066                                         dev->name,
2067                                         *(unsigned long *)&tpl->MData[2+2]);
2068                         }
2069                         else
2070                         {
2071                                 if(tms380tr_debug > 3)
2072                                         printk(KERN_DEBUG "%s: Directed frame tx'd\n",
2073                                                 dev->name);
2074                         }
2075                 }
2076                 else
2077                 {
2078                         if(!DIRECTED_FRAME(tpl))
2079                         {
2080                                 if(tms380tr_debug > 3)
2081                                         printk(KERN_DEBUG "%s: Broadcast frame tx'd\n",
2082                                                 dev->name);
2083                         }
2084                 }
2085
2086                 tp->MacStat.tx_packets++;
2087                 if (tpl->DMABuff)
2088                         dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
2089                 dev_kfree_skb_irq(tpl->Skb);
2090                 tpl->BusyFlag = 0;      /* "free" TPL */
2091         }
2092
2093         if(!tp->TplFree->NextTPLPtr->BusyFlag)
2094                 netif_wake_queue(dev);
2095         return;
2096 }
2097
2098 /*
2099  * Called if a frame receive interrupt is generated by the adapter.
2100  * Check if the frame is valid and indicate it to system.
2101  */
2102 static void tms380tr_rcv_status_irq(struct net_device *dev)
2103 {
2104         struct net_local *tp = netdev_priv(dev);
2105         unsigned char *ReceiveDataPtr;
2106         struct sk_buff *skb;
2107         unsigned int Length, Length2;
2108         RPL *rpl;
2109         RPL *SaveHead;
2110         dma_addr_t dmabuf;
2111
2112         /* NOTE: At this point the SSB from RECEIVE STATUS is no longer
2113          * available, because the CLEAR SSB command has already been issued.
2114          *
2115          * Process all complete receives.
2116          */
2117
2118         for(;;)
2119         {
2120                 rpl = tp->RplHead;
2121                 if(rpl->Status & RX_VALID)
2122                         break;          /* RPL still in use by adapter */
2123
2124                 /* Forward RPLHead pointer to next list. */
2125                 SaveHead = tp->RplHead;
2126                 tp->RplHead = rpl->NextRPLPtr;
2127
2128                 /* Get the frame size (Byte swap for Intel).
2129                  * Do this early (see workaround comment below)
2130                  */
2131                 Length = be16_to_cpu(rpl->FrameSize);
2132
2133                 /* Check if the Frame_Start, Frame_End and
2134                  * Frame_Complete bits are set.
2135                  */
2136                 if((rpl->Status & VALID_SINGLE_BUFFER_FRAME)
2137                         == VALID_SINGLE_BUFFER_FRAME)
2138                 {
2139                         ReceiveDataPtr = rpl->MData;
2140
2141                         /* Workaround for delayed write of FrameSize on ISA
2142                          * (FrameSize is false but valid-bit is reset)
2143                          * Frame size is set to zero when the RPL is freed.
2144                          * Length2 is there because there have also been
2145                          * cases where the FrameSize was partially written
2146                          */
2147                         Length2 = be16_to_cpu(rpl->FrameSize);
2148
2149                         if(Length == 0 || Length != Length2)
2150                         {
2151                                 tp->RplHead = SaveHead;
2152                                 break;  /* Return to tms380tr_interrupt */
2153                         }
2154                         tms380tr_update_rcv_stats(tp,ReceiveDataPtr,Length);
2155
2156                         if(tms380tr_debug > 3)
2157                                 printk(KERN_DEBUG "%s: Packet Length %04X (%d)\n",
2158                                         dev->name, Length, Length);
2159
2160                         /* Indicate the received frame to system the
2161                          * adapter does the Source-Routing padding for
2162                          * us. See: OpenOptions in tms380tr_init_opb()
2163                          */
2164                         skb = rpl->Skb;
2165                         if(rpl->SkbStat == SKB_UNAVAILABLE)
2166                         {
2167                                 /* Try again to allocate skb */
2168                                 skb = dev_alloc_skb(tp->MaxPacketSize);
2169                                 if(skb == NULL)
2170                                 {
2171                                         /* Update Stats ?? */
2172                                 }
2173                                 else
2174                                 {
2175                                         skb_put(skb, tp->MaxPacketSize);
2176                                         rpl->SkbStat    = SKB_DATA_COPY;
2177                                         ReceiveDataPtr  = rpl->MData;
2178                                 }
2179                         }
2180
2181                         if(skb && (rpl->SkbStat == SKB_DATA_COPY
2182                                 || rpl->SkbStat == SKB_DMA_DIRECT))
2183                         {
2184                                 if(rpl->SkbStat == SKB_DATA_COPY)
2185                                         skb_copy_to_linear_data(skb, ReceiveDataPtr,
2186                                                        Length);
2187
2188                                 /* Deliver frame to system */
2189                                 rpl->Skb = NULL;
2190                                 skb_trim(skb,Length);
2191                                 skb->protocol = tr_type_trans(skb,dev);
2192                                 netif_rx(skb);
2193                         }
2194                 }
2195                 else    /* Invalid frame */
2196                 {
2197                         if(rpl->Skb != NULL)
2198                                 dev_kfree_skb_irq(rpl->Skb);
2199
2200                         /* Skip list. */
2201                         if(rpl->Status & RX_START_FRAME)
2202                                 /* Frame start bit is set -> overflow. */
2203                                 tp->MacStat.rx_errors++;
2204                 }
2205                 if (rpl->DMABuff)
2206                         dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE);
2207                 rpl->DMABuff = 0;
2208
2209                 /* Allocate new skb for rpl */
2210                 rpl->Skb = dev_alloc_skb(tp->MaxPacketSize);
2211                 /* skb == NULL ? then use local buffer */
2212                 if(rpl->Skb == NULL)
2213                 {
2214                         rpl->SkbStat = SKB_UNAVAILABLE;
2215                         rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer);
2216                         rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex];
2217                 }
2218                 else    /* skb != NULL */
2219                 {
2220                         rpl->Skb->dev = dev;
2221                         skb_put(rpl->Skb, tp->MaxPacketSize);
2222
2223                         /* Data unreachable for DMA ? then use local buffer */
2224                         dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
2225                         if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
2226                         {
2227                                 rpl->SkbStat = SKB_DATA_COPY;
2228                                 rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer);
2229                                 rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex];
2230                         }
2231                         else
2232                         {
2233                                 /* DMA directly in skb->data */
2234                                 rpl->SkbStat = SKB_DMA_DIRECT;
2235                                 rpl->FragList[0].DataAddr = htonl(dmabuf);
2236                                 rpl->MData = rpl->Skb->data;
2237                                 rpl->DMABuff = dmabuf;
2238                         }
2239                 }
2240
2241                 rpl->FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize);
2242                 rpl->FrameSize = 0;
2243
2244                 /* Pass the last RPL back to the adapter */
2245                 tp->RplTail->FrameSize = 0;
2246
2247                 /* Reset the CSTAT field in the list. */
2248                 tms380tr_write_rpl_status(tp->RplTail, RX_VALID | RX_FRAME_IRQ);
2249
2250                 /* Current RPL becomes last one in list. */
2251                 tp->RplTail = tp->RplTail->NextRPLPtr;
2252
2253                 /* Inform adapter about RPL valid. */
2254                 tms380tr_exec_sifcmd(dev, CMD_RX_VALID);
2255         }
2256
2257         return;
2258 }
2259
2260 /*
2261  * This function should be used whenever the status of any RPL must be
2262  * modified by the driver, because the compiler may otherwise change the
2263  * order of instructions such that writing the RPL status may be executed
2264  * at an undesireable time. When this function is used, the status is
2265  * always written when the function is called.
2266  */
2267 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
2268 {
2269         rpl->Status = Status;
2270
2271         return;
2272 }
2273
2274 /*
2275  * The function updates the statistic counters in mac->MacStat.
2276  * It differtiates between directed and broadcast/multicast ( ==functional)
2277  * frames.
2278  */
2279 static void tms380tr_update_rcv_stats(struct net_local *tp, unsigned char DataPtr[],
2280                                         unsigned int Length)
2281 {
2282         tp->MacStat.rx_packets++;
2283         tp->MacStat.rx_bytes += Length;
2284
2285         /* Test functional bit */
2286         if(DataPtr[2] & GROUP_BIT)
2287                 tp->MacStat.multicast++;
2288
2289         return;
2290 }
2291
2292 static int tms380tr_set_mac_address(struct net_device *dev, void *addr)
2293 {
2294         struct net_local *tp = netdev_priv(dev);
2295         struct sockaddr *saddr = addr;
2296
2297         if (tp->AdapterOpenFlag || tp->AdapterVirtOpenFlag) {
2298                 printk(KERN_WARNING "%s: Cannot set MAC/LAA address while card is open\n", dev->name);
2299                 return -EIO;
2300         }
2301         memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len);
2302         return 0;
2303 }
2304
2305 #if TMS380TR_DEBUG > 0
2306 /*
2307  * Dump Packet (data)
2308  */
2309 static void tms380tr_dump(unsigned char *Data, int length)
2310 {
2311         int i, j;
2312
2313         for (i = 0, j = 0; i < length / 8; i++, j += 8)
2314         {
2315                 printk(KERN_DEBUG "%02x %02x %02x %02x %02x %02x %02x %02x\n",
2316                        Data[j+0],Data[j+1],Data[j+2],Data[j+3],
2317                        Data[j+4],Data[j+5],Data[j+6],Data[j+7]);
2318         }
2319
2320         return;
2321 }
2322 #endif
2323
2324 void tmsdev_term(struct net_device *dev)
2325 {
2326         struct net_local *tp;
2327
2328         tp = netdev_priv(dev);
2329         dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
2330                 DMA_BIDIRECTIONAL);
2331 }
2332
2333 int tmsdev_init(struct net_device *dev, struct device *pdev)
2334 {
2335         struct net_local *tms_local;
2336
2337         memset(netdev_priv(dev), 0, sizeof(struct net_local));
2338         tms_local = netdev_priv(dev);
2339         init_waitqueue_head(&tms_local->wait_for_tok_int);
2340         if (pdev->dma_mask)
2341                 tms_local->dmalimit = *pdev->dma_mask;
2342         else
2343                 return -ENOMEM;
2344         tms_local->pdev = pdev;
2345         tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local,
2346             sizeof(struct net_local), DMA_BIDIRECTIONAL);
2347         if (tms_local->dmabuffer + sizeof(struct net_local) >
2348                         tms_local->dmalimit)
2349         {
2350                 printk(KERN_INFO "%s: Memory not accessible for DMA\n",
2351                         dev->name);
2352                 tmsdev_term(dev);
2353                 return -ENOMEM;
2354         }
2355
2356         /* These can be overridden by the card driver if needed */
2357         dev->open               = tms380tr_open;
2358         dev->stop               = tms380tr_close;
2359         dev->do_ioctl           = NULL;
2360         dev->hard_start_xmit    = tms380tr_send_packet;
2361         dev->tx_timeout         = tms380tr_timeout;
2362         dev->watchdog_timeo     = HZ;
2363         dev->get_stats          = tms380tr_get_stats;
2364         dev->set_multicast_list = &tms380tr_set_multicast_list;
2365         dev->set_mac_address    = tms380tr_set_mac_address;
2366
2367         return 0;
2368 }
2369
2370 EXPORT_SYMBOL(tms380tr_open);
2371 EXPORT_SYMBOL(tms380tr_close);
2372 EXPORT_SYMBOL(tms380tr_interrupt);
2373 EXPORT_SYMBOL(tmsdev_init);
2374 EXPORT_SYMBOL(tmsdev_term);
2375 EXPORT_SYMBOL(tms380tr_wait);
2376
2377 #ifdef MODULE
2378
2379 static struct module *TMS380_module = NULL;
2380
2381 int init_module(void)
2382 {
2383         printk(KERN_DEBUG "%s", version);
2384
2385         TMS380_module = &__this_module;
2386         return 0;
2387 }
2388
2389 void cleanup_module(void)
2390 {
2391         TMS380_module = NULL;
2392 }
2393 #endif
2394
2395 MODULE_LICENSE("GPL");
2396