ieee1394: fix host device registering when nodemgr disabled
[sfrench/cifs-2.6.git] / drivers / net / sk_mca.h
1 #ifndef _SK_MCA_INCLUDE_
2 #define _SK_MCA_INCLUDE_
3
4 #ifdef _SK_MCA_DRIVER_
5
6 /* Adapter ID's */
7 #define SKNET_MCA_ID 0x6afd
8 #define SKNET_JUNIOR_MCA_ID 0x6be9
9
10 /* media enumeration - defined in a way that it fits onto the MC2+'s
11    POS registers... */
12
13 typedef enum { Media_10Base2, Media_10BaseT,
14         Media_10Base5, Media_Unknown, Media_Count
15 } skmca_medium;
16
17 /* private structure */
18 typedef struct {
19         unsigned int slot;      /* MCA-Slot-#                       */
20         void __iomem *base;
21         void __iomem *macbase;  /* base address of MAC address PROM */
22         void __iomem *ioregaddr;/* address of I/O-register (Lo)     */
23         void __iomem *ctrladdr; /* address of control/stat register */
24         void __iomem *cmdaddr;  /* address of I/O-command register  */
25         int nextrx;             /* index of next RX descriptor to
26                                    be read                          */
27         int nexttxput;          /* index of next free TX descriptor */
28         int nexttxdone;         /* index of next TX descriptor to
29                                    be finished                      */
30         int txbusy;             /* # of busy TX descriptors         */
31         struct net_device_stats stat;   /* packet statistics            */
32         int realirq;            /* memorizes actual IRQ, even when
33                                    currently not allocated          */
34         skmca_medium medium;    /* physical cannector               */
35         spinlock_t lock;
36 } skmca_priv;
37
38 /* card registers: control/status register bits */
39
40 #define CTRL_ADR_DATA      0    /* Bit 0 = 0 ->access data register  */
41 #define CTRL_ADR_RAP       1    /* Bit 0 = 1 ->access RAP register   */
42 #define CTRL_RW_WRITE      0    /* Bit 1 = 0 ->write register        */
43 #define CTRL_RW_READ       2    /* Bit 1 = 1 ->read register         */
44 #define CTRL_RESET_ON      0    /* Bit 3 = 0 ->reset board           */
45 #define CTRL_RESET_OFF     8    /* Bit 3 = 1 ->no reset of board     */
46
47 #define STAT_ADR_DATA      0    /* Bit 0 of ctrl register read back  */
48 #define STAT_ADR_RAP       1
49 #define STAT_RW_WRITE      0    /* Bit 1 of ctrl register read back  */
50 #define STAT_RW_READ       2
51 #define STAT_RESET_ON      0    /* Bit 3 of ctrl register read back  */
52 #define STAT_RESET_OFF     8
53 #define STAT_IRQ_ACT       0    /* interrupt pending                 */
54 #define STAT_IRQ_NOACT     16   /* no interrupt pending              */
55 #define STAT_IO_NOBUSY     0    /* no transfer busy                  */
56 #define STAT_IO_BUSY       32   /* transfer busy                     */
57
58 /* I/O command register bits */
59
60 #define IOCMD_GO           128  /* Bit 7 = 1 -> start register xfer  */
61
62 /* LANCE registers */
63
64 #define LANCE_CSR0         0    /* Status/Control                    */
65
66 #define CSR0_ERR           0x8000       /* general error flag                */
67 #define CSR0_BABL          0x4000       /* transmitter timeout               */
68 #define CSR0_CERR          0x2000       /* collision error                   */
69 #define CSR0_MISS          0x1000       /* lost Rx block                     */
70 #define CSR0_MERR          0x0800       /* memory access error               */
71 #define CSR0_RINT          0x0400       /* receiver interrupt                */
72 #define CSR0_TINT          0x0200       /* transmitter interrupt             */
73 #define CSR0_IDON          0x0100       /* initialization done               */
74 #define CSR0_INTR          0x0080       /* general interrupt flag            */
75 #define CSR0_INEA          0x0040       /* interrupt enable                  */
76 #define CSR0_RXON          0x0020       /* receiver enabled                  */
77 #define CSR0_TXON          0x0010       /* transmitter enabled               */
78 #define CSR0_TDMD          0x0008       /* force transmission now            */
79 #define CSR0_STOP          0x0004       /* stop LANCE                        */
80 #define CSR0_STRT          0x0002       /* start LANCE                       */
81 #define CSR0_INIT          0x0001       /* read initialization block         */
82
83 #define LANCE_CSR1         1    /* addr bit 0..15 of initialization  */
84 #define LANCE_CSR2         2    /*          16..23 block             */
85
86 #define LANCE_CSR3         3    /* Bus control                       */
87 #define CSR3_BCON_HOLD     0    /* Bit 0 = 0 -> BM1,BM0,HOLD         */
88 #define CSR3_BCON_BUSRQ    1    /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ    */
89 #define CSR3_ALE_HIGH      0    /* Bit 1 = 0 -> ALE asserted high    */
90 #define CSR3_ALE_LOW       2    /* Bit 1 = 1 -> ALE asserted low     */
91 #define CSR3_BSWAP_OFF     0    /* Bit 2 = 0 -> no byte swap         */
92 #define CSR3_BSWAP_ON      4    /* Bit 2 = 1 -> byte swap            */
93
94 /* LANCE structures */
95
96 typedef struct {                /* LANCE initialization block        */
97         u16 Mode;               /* mode flags                        */
98         u8 PAdr[6];             /* MAC address                       */
99         u8 LAdrF[8];            /* Multicast filter                  */
100         u32 RdrP;               /* Receive descriptor                */
101         u32 TdrP;               /* Transmit descriptor               */
102 } LANCE_InitBlock;
103
104 /* Mode flags init block */
105
106 #define LANCE_INIT_PROM    0x8000       /* enable promiscous mode            */
107 #define LANCE_INIT_INTL    0x0040       /* internal loopback                 */
108 #define LANCE_INIT_DRTY    0x0020       /* disable retry                     */
109 #define LANCE_INIT_COLL    0x0010       /* force collision                   */
110 #define LANCE_INIT_DTCR    0x0008       /* disable transmit CRC              */
111 #define LANCE_INIT_LOOP    0x0004       /* loopback                          */
112 #define LANCE_INIT_DTX     0x0002       /* disable transmitter               */
113 #define LANCE_INIT_DRX     0x0001       /* disable receiver                  */
114
115 typedef struct {                /* LANCE Tx descriptor               */
116         u16 LowAddr;            /* bit 0..15 of address              */
117         u16 Flags;              /* bit 16..23 of address + Flags     */
118         u16 Len;                /* 2s complement of packet length    */
119         u16 Status;             /* Result of transmission            */
120 } LANCE_TxDescr;
121
122 #define TXDSCR_FLAGS_OWN   0x8000       /* LANCE owns descriptor             */
123 #define TXDSCR_FLAGS_ERR   0x4000       /* summary error flag                */
124 #define TXDSCR_FLAGS_MORE  0x1000       /* more than one retry needed?       */
125 #define TXDSCR_FLAGS_ONE   0x0800       /* one retry?                        */
126 #define TXDSCR_FLAGS_DEF   0x0400       /* transmission deferred?            */
127 #define TXDSCR_FLAGS_STP   0x0200       /* first packet in chain?            */
128 #define TXDSCR_FLAGS_ENP   0x0100       /* last packet in chain?             */
129
130 #define TXDSCR_STATUS_BUFF 0x8000       /* buffer error?                     */
131 #define TXDSCR_STATUS_UFLO 0x4000       /* silo underflow during transmit?   */
132 #define TXDSCR_STATUS_LCOL 0x1000       /* late collision?                   */
133 #define TXDSCR_STATUS_LCAR 0x0800       /* loss of carrier?                  */
134 #define TXDSCR_STATUS_RTRY 0x0400       /* retry error?                      */
135
136 typedef struct {                /* LANCE Rx descriptor               */
137         u16 LowAddr;            /* bit 0..15 of address              */
138         u16 Flags;              /* bit 16..23 of address + Flags     */
139         u16 MaxLen;             /* 2s complement of buffer length    */
140         u16 Len;                /* packet length                     */
141 } LANCE_RxDescr;
142
143 #define RXDSCR_FLAGS_OWN   0x8000       /* LANCE owns descriptor             */
144 #define RXDSCR_FLAGS_ERR   0x4000       /* summary error flag                */
145 #define RXDSCR_FLAGS_FRAM  0x2000       /* framing error flag                */
146 #define RXDSCR_FLAGS_OFLO  0x1000       /* FIFO overflow?                    */
147 #define RXDSCR_FLAGS_CRC   0x0800       /* CRC error?                        */
148 #define RXDSCR_FLAGS_BUFF  0x0400       /* buffer error?                     */
149 #define RXDSCR_FLAGS_STP   0x0200       /* first packet in chain?            */
150 #define RXDCSR_FLAGS_ENP   0x0100       /* last packet in chain?             */
151
152 /* RAM layout */
153
154 #define TXCOUNT            4    /* length of TX descriptor queue     */
155 #define LTXCOUNT           2    /* log2 of it                        */
156 #define RXCOUNT            4    /* length of RX descriptor queue     */
157 #define LRXCOUNT           2    /* log2 of it                        */
158
159 #define RAM_INITBASE       0    /* LANCE init block                  */
160 #define RAM_TXBASE         24   /* Start of TX descriptor queue      */
161 #define RAM_RXBASE         \
162 (RAM_TXBASE + (TXCOUNT * 8))    /* Start of RX descriptor queue      */
163 #define RAM_DATABASE       \
164 (RAM_RXBASE + (RXCOUNT * 8))    /* Start of data area for frames     */
165 #define RAM_BUFSIZE        1580 /* max. frame size - should never be
166                                    reached                           */
167
168 #endif                          /* _SK_MCA_DRIVER_ */
169
170 #endif  /* _SK_MCA_INCLUDE_ */