drivers/net/phy/bcm-cygnus.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2015 Broadcom Corporation
   4  */
   5
   6 /* Broadcom Cygnus SoC internal transceivers support. */
   7 #include "bcm-phy-lib.h"
   8 #include <linux/brcmphy.h>
   9 #include <linux/module.h>
  10 #include <linux/netdevice.h>
  11 #include <linux/phy.h>
  12
  13 /* Broadcom Cygnus Phy specific registers */
  14 #define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0  0x91E5 /* VDAL Control register */
  15
  16 static int bcm_cygnus_afe_config(struct phy_device *phydev)
  17 {
  18         int rc;
  19
  20         /* ensure smdspclk is enabled */
  21         rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
  22         if (rc < 0)
  23                 return rc;
  24
  25         /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
  26         rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
  27         if (rc < 0)
  28                 return rc;
  29
  30         /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
  31         rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
  32         if (rc < 0)
  33                 return rc;
  34
  35         /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
  36         rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
  37         if (rc < 0)
  38                 return rc;
  39
  40         /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
  41         rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
  42         if (rc < 0)
  43                 return rc;
  44
  45         /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
  46         rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
  47         if (rc < 0)
  48                 return rc;
  49
  50         /* Adjust bias current trim to overcome digital offSet */
  51         rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
  52         if (rc < 0)
  53                 return rc;
  54
  55         /* make rcal=100, since rdb default is 000 */
  56         rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10);
  57         if (rc < 0)
  58                 return rc;
  59
  60         /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
  61         rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10);
  62         if (rc < 0)
  63                 return rc;
  64
  65         /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
  66         rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00);
  67
  68         return 0;
  69 }
  70
  71 static int bcm_cygnus_config_init(struct phy_device *phydev)
  72 {
  73         int reg, rc;
  74
  75         reg = phy_read(phydev, MII_BCM54XX_ECR);
  76         if (reg < 0)
  77                 return reg;
  78
  79         /* Mask interrupts globally. */
  80         reg |= MII_BCM54XX_ECR_IM;
  81         rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
  82         if (rc)
  83                 return rc;
  84
  85         /* Unmask events of interest */
  86         reg = ~(MII_BCM54XX_INT_DUPLEX |
  87                 MII_BCM54XX_INT_SPEED |
  88                 MII_BCM54XX_INT_LINK);
  89         rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
  90         if (rc)
  91                 return rc;
  92
  93         /* Apply AFE settings for the PHY */
  94         rc = bcm_cygnus_afe_config(phydev);
  95         if (rc)
  96                 return rc;
  97
  98         /* Advertise EEE */
  99         rc = bcm_phy_set_eee(phydev, true);
 100         if (rc)
 101                 return rc;
 102
 103         /* Enable APD */
 104         return bcm_phy_enable_apd(phydev, false);
 105 }
 106
 107 static int bcm_cygnus_resume(struct phy_device *phydev)
 108 {
 109         int rc;
 110
 111         genphy_resume(phydev);
 112
 113         /* Re-initialize the PHY to apply AFE work-arounds and
 114          * configurations when coming out of suspend.
 115          */
 116         rc = bcm_cygnus_config_init(phydev);
 117         if (rc)
 118                 return rc;
 119
 120         /* restart auto negotiation with the new settings */
 121         return genphy_config_aneg(phydev);
 122 }
 123
 124 static struct phy_driver bcm_cygnus_phy_driver[] = {
 125 {
 126         .phy_id        = PHY_ID_BCM_CYGNUS,
 127         .phy_id_mask   = 0xfffffff0,
 128         .name          = "Broadcom Cygnus PHY",
 129         .features      = PHY_GBIT_FEATURES,
 130         .config_init   = bcm_cygnus_config_init,
 131         .ack_interrupt = bcm_phy_ack_intr,
 132         .config_intr   = bcm_phy_config_intr,
 133         .suspend       = genphy_suspend,
 134         .resume        = bcm_cygnus_resume,
 135 } };
 136
 137 static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
 138         { PHY_ID_BCM_CYGNUS, 0xfffffff0, },
 139         { }
 140 };
 141 MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
 142
 143 module_phy_driver(bcm_cygnus_phy_driver);
 144
 145 MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
 146 MODULE_LICENSE("GPL v2");
 147 MODULE_AUTHOR("Broadcom Corporation");