drivers/net/e1000e/ethtool.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2007 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /* ethtool support for e1000 */
  30
  31 #include <linux/netdevice.h>
  32 #include <linux/ethtool.h>
  33 #include <linux/pci.h>
  34 #include <linux/delay.h>
  35
  36 #include "e1000.h"
  37
  38 struct e1000_stats {
  39         char stat_string[ETH_GSTRING_LEN];
  40         int sizeof_stat;
  41         int stat_offset;
  42 };
  43
  44 #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
  45                       offsetof(struct e1000_adapter, m)
  46 static const struct e1000_stats e1000_gstrings_stats[] = {
  47         { "rx_packets", E1000_STAT(stats.gprc) },
  48         { "tx_packets", E1000_STAT(stats.gptc) },
  49         { "rx_bytes", E1000_STAT(stats.gorcl) },
  50         { "tx_bytes", E1000_STAT(stats.gotcl) },
  51         { "rx_broadcast", E1000_STAT(stats.bprc) },
  52         { "tx_broadcast", E1000_STAT(stats.bptc) },
  53         { "rx_multicast", E1000_STAT(stats.mprc) },
  54         { "tx_multicast", E1000_STAT(stats.mptc) },
  55         { "rx_errors", E1000_STAT(net_stats.rx_errors) },
  56         { "tx_errors", E1000_STAT(net_stats.tx_errors) },
  57         { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
  58         { "multicast", E1000_STAT(stats.mprc) },
  59         { "collisions", E1000_STAT(stats.colc) },
  60         { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
  61         { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
  62         { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
  63         { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
  64         { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
  65         { "rx_missed_errors", E1000_STAT(stats.mpc) },
  66         { "tx_aborted_errors", E1000_STAT(stats.ecol) },
  67         { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
  68         { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
  69         { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
  70         { "tx_window_errors", E1000_STAT(stats.latecol) },
  71         { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
  72         { "tx_deferred_ok", E1000_STAT(stats.dc) },
  73         { "tx_single_coll_ok", E1000_STAT(stats.scc) },
  74         { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
  75         { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
  76         { "tx_restart_queue", E1000_STAT(restart_queue) },
  77         { "rx_long_length_errors", E1000_STAT(stats.roc) },
  78         { "rx_short_length_errors", E1000_STAT(stats.ruc) },
  79         { "rx_align_errors", E1000_STAT(stats.algnerrc) },
  80         { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
  81         { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
  82         { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
  83         { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
  84         { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
  85         { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
  86         { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
  87         { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
  88         { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
  89         { "rx_header_split", E1000_STAT(rx_hdr_split) },
  90         { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
  91         { "tx_smbus", E1000_STAT(stats.mgptc) },
  92         { "rx_smbus", E1000_STAT(stats.mgprc) },
  93         { "dropped_smbus", E1000_STAT(stats.mgpdc) },
  94         { "rx_dma_failed", E1000_STAT(rx_dma_failed) },
  95         { "tx_dma_failed", E1000_STAT(tx_dma_failed) },
  96 };
  97
  98 #define E1000_GLOBAL_STATS_LEN  ARRAY_SIZE(e1000_gstrings_stats)
  99 #define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
 100 static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
 101         "Register test  (offline)", "Eeprom test    (offline)",
 102         "Interrupt test (offline)", "Loopback test  (offline)",
 103         "Link test   (on/offline)"
 104 };
 105 #define E1000_TEST_LEN  ARRAY_SIZE(e1000_gstrings_test)
 106
 107 static int e1000_get_settings(struct net_device *netdev,
 108                               struct ethtool_cmd *ecmd)
 109 {
 110         struct e1000_adapter *adapter = netdev_priv(netdev);
 111         struct e1000_hw *hw = &adapter->hw;
 112         u32 status;
 113
 114         if (hw->media_type == e1000_media_type_copper) {
 115
 116                 ecmd->supported = (SUPPORTED_10baseT_Half |
 117                                    SUPPORTED_10baseT_Full |
 118                                    SUPPORTED_100baseT_Half |
 119                                    SUPPORTED_100baseT_Full |
 120                                    SUPPORTED_1000baseT_Full |
 121                                    SUPPORTED_Autoneg |
 122                                    SUPPORTED_TP);
 123                 if (hw->phy.type == e1000_phy_ife)
 124                         ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 125                 ecmd->advertising = ADVERTISED_TP;
 126
 127                 if (hw->mac.autoneg == 1) {
 128                         ecmd->advertising |= ADVERTISED_Autoneg;
 129                         /* the e1000 autoneg seems to match ethtool nicely */
 130                         ecmd->advertising |= hw->phy.autoneg_advertised;
 131                 }
 132
 133                 ecmd->port = PORT_TP;
 134                 ecmd->phy_address = hw->phy.addr;
 135                 ecmd->transceiver = XCVR_INTERNAL;
 136
 137         } else {
 138                 ecmd->supported   = (SUPPORTED_1000baseT_Full |
 139                                      SUPPORTED_FIBRE |
 140                                      SUPPORTED_Autoneg);
 141
 142                 ecmd->advertising = (ADVERTISED_1000baseT_Full |
 143                                      ADVERTISED_FIBRE |
 144                                      ADVERTISED_Autoneg);
 145
 146                 ecmd->port = PORT_FIBRE;
 147                 ecmd->transceiver = XCVR_EXTERNAL;
 148         }
 149
 150         status = er32(STATUS);
 151         if (status & E1000_STATUS_LU) {
 152                 if (status & E1000_STATUS_SPEED_1000)
 153                         ecmd->speed = 1000;
 154                 else if (status & E1000_STATUS_SPEED_100)
 155                         ecmd->speed = 100;
 156                 else
 157                         ecmd->speed = 10;
 158
 159                 if (status & E1000_STATUS_FD)
 160                         ecmd->duplex = DUPLEX_FULL;
 161                 else
 162                         ecmd->duplex = DUPLEX_HALF;
 163         } else {
 164                 ecmd->speed = -1;
 165                 ecmd->duplex = -1;
 166         }
 167
 168         ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
 169                          hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 170         return 0;
 171 }
 172
 173 static u32 e1000_get_link(struct net_device *netdev)
 174 {
 175         struct e1000_adapter *adapter = netdev_priv(netdev);
 176         struct e1000_hw *hw = &adapter->hw;
 177         u32 status;
 178
 179         status = er32(STATUS);
 180         return (status & E1000_STATUS_LU);
 181 }
 182
 183 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 184 {
 185         struct e1000_mac_info *mac = &adapter->hw.mac;
 186
 187         mac->autoneg = 0;
 188
 189         /* Fiber NICs only allow 1000 gbps Full duplex */
 190         if ((adapter->hw.media_type == e1000_media_type_fiber) &&
 191                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
 192                 ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
 193                          "configuration\n");
 194                 return -EINVAL;
 195         }
 196
 197         switch (spddplx) {
 198         case SPEED_10 + DUPLEX_HALF:
 199                 mac->forced_speed_duplex = ADVERTISE_10_HALF;
 200                 break;
 201         case SPEED_10 + DUPLEX_FULL:
 202                 mac->forced_speed_duplex = ADVERTISE_10_FULL;
 203                 break;
 204         case SPEED_100 + DUPLEX_HALF:
 205                 mac->forced_speed_duplex = ADVERTISE_100_HALF;
 206                 break;
 207         case SPEED_100 + DUPLEX_FULL:
 208                 mac->forced_speed_duplex = ADVERTISE_100_FULL;
 209                 break;
 210         case SPEED_1000 + DUPLEX_FULL:
 211                 mac->autoneg = 1;
 212                 adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
 213                 break;
 214         case SPEED_1000 + DUPLEX_HALF: /* not supported */
 215         default:
 216                 ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
 217                          "configuration\n");
 218                 return -EINVAL;
 219         }
 220         return 0;
 221 }
 222
 223 static int e1000_set_settings(struct net_device *netdev,
 224                               struct ethtool_cmd *ecmd)
 225 {
 226         struct e1000_adapter *adapter = netdev_priv(netdev);
 227         struct e1000_hw *hw = &adapter->hw;
 228
 229         /* When SoL/IDER sessions are active, autoneg/speed/duplex
 230          * cannot be changed */
 231         if (e1000_check_reset_block(hw)) {
 232                 ndev_err(netdev, "Cannot change link "
 233                          "characteristics when SoL/IDER is active.\n");
 234                 return -EINVAL;
 235         }
 236
 237         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 238                 msleep(1);
 239
 240         if (ecmd->autoneg == AUTONEG_ENABLE) {
 241                 hw->mac.autoneg = 1;
 242                 if (hw->media_type == e1000_media_type_fiber)
 243                         hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
 244                                                      ADVERTISED_FIBRE |
 245                                                      ADVERTISED_Autoneg;
 246                 else
 247                         hw->phy.autoneg_advertised = ecmd->advertising |
 248                                                      ADVERTISED_TP |
 249                                                      ADVERTISED_Autoneg;
 250                 ecmd->advertising = hw->phy.autoneg_advertised;
 251         } else {
 252                 if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
 253                         clear_bit(__E1000_RESETTING, &adapter->state);
 254                         return -EINVAL;
 255                 }
 256         }
 257
 258         /* reset the link */
 259
 260         if (netif_running(adapter->netdev)) {
 261                 e1000e_down(adapter);
 262                 e1000e_up(adapter);
 263         } else {
 264                 e1000e_reset(adapter);
 265         }
 266
 267         clear_bit(__E1000_RESETTING, &adapter->state);
 268         return 0;
 269 }
 270
 271 static void e1000_get_pauseparam(struct net_device *netdev,
 272                                  struct ethtool_pauseparam *pause)
 273 {
 274         struct e1000_adapter *adapter = netdev_priv(netdev);
 275         struct e1000_hw *hw = &adapter->hw;
 276
 277         pause->autoneg =
 278                 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
 279
 280         if (hw->mac.fc == e1000_fc_rx_pause) {
 281                 pause->rx_pause = 1;
 282         } else if (hw->mac.fc == e1000_fc_tx_pause) {
 283                 pause->tx_pause = 1;
 284         } else if (hw->mac.fc == e1000_fc_full) {
 285                 pause->rx_pause = 1;
 286                 pause->tx_pause = 1;
 287         }
 288 }
 289
 290 static int e1000_set_pauseparam(struct net_device *netdev,
 291                                 struct ethtool_pauseparam *pause)
 292 {
 293         struct e1000_adapter *adapter = netdev_priv(netdev);
 294         struct e1000_hw *hw = &adapter->hw;
 295         int retval = 0;
 296
 297         adapter->fc_autoneg = pause->autoneg;
 298
 299         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 300                 msleep(1);
 301
 302         if (pause->rx_pause && pause->tx_pause)
 303                 hw->mac.fc = e1000_fc_full;
 304         else if (pause->rx_pause && !pause->tx_pause)
 305                 hw->mac.fc = e1000_fc_rx_pause;
 306         else if (!pause->rx_pause && pause->tx_pause)
 307                 hw->mac.fc = e1000_fc_tx_pause;
 308         else if (!pause->rx_pause && !pause->tx_pause)
 309                 hw->mac.fc = e1000_fc_none;
 310
 311         hw->mac.original_fc = hw->mac.fc;
 312
 313         if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 314                 hw->mac.fc = e1000_fc_default;
 315                 if (netif_running(adapter->netdev)) {
 316                         e1000e_down(adapter);
 317                         e1000e_up(adapter);
 318                 } else {
 319                         e1000e_reset(adapter);
 320                 }
 321         } else {
 322                 retval = ((hw->media_type == e1000_media_type_fiber) ?
 323                           hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
 324         }
 325
 326         clear_bit(__E1000_RESETTING, &adapter->state);
 327         return retval;
 328 }
 329
 330 static u32 e1000_get_rx_csum(struct net_device *netdev)
 331 {
 332         struct e1000_adapter *adapter = netdev_priv(netdev);
 333         return (adapter->flags & FLAG_RX_CSUM_ENABLED);
 334 }
 335
 336 static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
 337 {
 338         struct e1000_adapter *adapter = netdev_priv(netdev);
 339
 340         if (data)
 341                 adapter->flags |= FLAG_RX_CSUM_ENABLED;
 342         else
 343                 adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
 344
 345         if (netif_running(netdev))
 346                 e1000e_reinit_locked(adapter);
 347         else
 348                 e1000e_reset(adapter);
 349         return 0;
 350 }
 351
 352 static u32 e1000_get_tx_csum(struct net_device *netdev)
 353 {
 354         return ((netdev->features & NETIF_F_HW_CSUM) != 0);
 355 }
 356
 357 static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
 358 {
 359         if (data)
 360                 netdev->features |= NETIF_F_HW_CSUM;
 361         else
 362                 netdev->features &= ~NETIF_F_HW_CSUM;
 363
 364         return 0;
 365 }
 366
 367 static int e1000_set_tso(struct net_device *netdev, u32 data)
 368 {
 369         struct e1000_adapter *adapter = netdev_priv(netdev);
 370
 371         if (data) {
 372                 netdev->features |= NETIF_F_TSO;
 373                 netdev->features |= NETIF_F_TSO6;
 374         } else {
 375                 netdev->features &= ~NETIF_F_TSO;
 376                 netdev->features &= ~NETIF_F_TSO6;
 377         }
 378
 379         ndev_info(netdev, "TSO is %s\n",
 380                   data ? "Enabled" : "Disabled");
 381         adapter->flags |= FLAG_TSO_FORCE;
 382         return 0;
 383 }
 384
 385 static u32 e1000_get_msglevel(struct net_device *netdev)
 386 {
 387         struct e1000_adapter *adapter = netdev_priv(netdev);
 388         return adapter->msg_enable;
 389 }
 390
 391 static void e1000_set_msglevel(struct net_device *netdev, u32 data)
 392 {
 393         struct e1000_adapter *adapter = netdev_priv(netdev);
 394         adapter->msg_enable = data;
 395 }
 396
 397 static int e1000_get_regs_len(struct net_device *netdev)
 398 {
 399 #define E1000_REGS_LEN 32 /* overestimate */
 400         return E1000_REGS_LEN * sizeof(u32);
 401 }
 402
 403 static void e1000_get_regs(struct net_device *netdev,
 404                            struct ethtool_regs *regs, void *p)
 405 {
 406         struct e1000_adapter *adapter = netdev_priv(netdev);
 407         struct e1000_hw *hw = &adapter->hw;
 408         u32 *regs_buff = p;
 409         u16 phy_data;
 410         u8 revision_id;
 411
 412         memset(p, 0, E1000_REGS_LEN * sizeof(u32));
 413
 414         pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
 415
 416         regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
 417
 418         regs_buff[0]  = er32(CTRL);
 419         regs_buff[1]  = er32(STATUS);
 420
 421         regs_buff[2]  = er32(RCTL);
 422         regs_buff[3]  = er32(RDLEN);
 423         regs_buff[4]  = er32(RDH);
 424         regs_buff[5]  = er32(RDT);
 425         regs_buff[6]  = er32(RDTR);
 426
 427         regs_buff[7]  = er32(TCTL);
 428         regs_buff[8]  = er32(TDLEN);
 429         regs_buff[9]  = er32(TDH);
 430         regs_buff[10] = er32(TDT);
 431         regs_buff[11] = er32(TIDV);
 432
 433         regs_buff[12] = adapter->hw.phy.type;  /* PHY type (IGP=1, M88=0) */
 434         if (hw->phy.type == e1000_phy_m88) {
 435                 e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 436                 regs_buff[13] = (u32)phy_data; /* cable length */
 437                 regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 438                 regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 439                 regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 440                 e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
 441                 regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
 442                 regs_buff[18] = regs_buff[13]; /* cable polarity */
 443                 regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 444                 regs_buff[20] = regs_buff[17]; /* polarity correction */
 445                 /* phy receive errors */
 446                 regs_buff[22] = adapter->phy_stats.receive_errors;
 447                 regs_buff[23] = regs_buff[13]; /* mdix mode */
 448         }
 449         regs_buff[21] = adapter->phy_stats.idle_errors;  /* phy idle errors */
 450         e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
 451         regs_buff[24] = (u32)phy_data;  /* phy local receiver status */
 452         regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 453 }
 454
 455 static int e1000_get_eeprom_len(struct net_device *netdev)
 456 {
 457         struct e1000_adapter *adapter = netdev_priv(netdev);
 458         return adapter->hw.nvm.word_size * 2;
 459 }
 460
 461 static int e1000_get_eeprom(struct net_device *netdev,
 462                             struct ethtool_eeprom *eeprom, u8 *bytes)
 463 {
 464         struct e1000_adapter *adapter = netdev_priv(netdev);
 465         struct e1000_hw *hw = &adapter->hw;
 466         u16 *eeprom_buff;
 467         int first_word;
 468         int last_word;
 469         int ret_val = 0;
 470         u16 i;
 471
 472         if (eeprom->len == 0)
 473                 return -EINVAL;
 474
 475         eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
 476
 477         first_word = eeprom->offset >> 1;
 478         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 479
 480         eeprom_buff = kmalloc(sizeof(u16) *
 481                         (last_word - first_word + 1), GFP_KERNEL);
 482         if (!eeprom_buff)
 483                 return -ENOMEM;
 484
 485         if (hw->nvm.type == e1000_nvm_eeprom_spi) {
 486                 ret_val = e1000_read_nvm(hw, first_word,
 487                                          last_word - first_word + 1,
 488                                          eeprom_buff);
 489         } else {
 490                 for (i = 0; i < last_word - first_word + 1; i++) {
 491                         ret_val = e1000_read_nvm(hw, first_word + i, 1,
 492                                                       &eeprom_buff[i]);
 493                         if (ret_val)
 494                                 break;
 495                 }
 496         }
 497
 498         /* Device's eeprom is always little-endian, word addressable */
 499         for (i = 0; i < last_word - first_word + 1; i++)
 500                 le16_to_cpus(&eeprom_buff[i]);
 501
 502         memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
 503         kfree(eeprom_buff);
 504
 505         return ret_val;
 506 }
 507
 508 static int e1000_set_eeprom(struct net_device *netdev,
 509                             struct ethtool_eeprom *eeprom, u8 *bytes)
 510 {
 511         struct e1000_adapter *adapter = netdev_priv(netdev);
 512         struct e1000_hw *hw = &adapter->hw;
 513         u16 *eeprom_buff;
 514         void *ptr;
 515         int max_len;
 516         int first_word;
 517         int last_word;
 518         int ret_val = 0;
 519         u16 i;
 520
 521         if (eeprom->len == 0)
 522                 return -EOPNOTSUPP;
 523
 524         if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
 525                 return -EFAULT;
 526
 527         max_len = hw->nvm.word_size * 2;
 528
 529         first_word = eeprom->offset >> 1;
 530         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 531         eeprom_buff = kmalloc(max_len, GFP_KERNEL);
 532         if (!eeprom_buff)
 533                 return -ENOMEM;
 534
 535         ptr = (void *)eeprom_buff;
 536
 537         if (eeprom->offset & 1) {
 538                 /* need read/modify/write of first changed EEPROM word */
 539                 /* only the second byte of the word is being modified */
 540                 ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
 541                 ptr++;
 542         }
 543         if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
 544                 /* need read/modify/write of last changed EEPROM word */
 545                 /* only the first byte of the word is being modified */
 546                 ret_val = e1000_read_nvm(hw, last_word, 1,
 547                                   &eeprom_buff[last_word - first_word]);
 548
 549         /* Device's eeprom is always little-endian, word addressable */
 550         for (i = 0; i < last_word - first_word + 1; i++)
 551                 le16_to_cpus(&eeprom_buff[i]);
 552
 553         memcpy(ptr, bytes, eeprom->len);
 554
 555         for (i = 0; i < last_word - first_word + 1; i++)
 556                 eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
 557
 558         ret_val = e1000_write_nvm(hw, first_word,
 559                                   last_word - first_word + 1, eeprom_buff);
 560
 561         /* Update the checksum over the first part of the EEPROM if needed
 562          * and flush shadow RAM for 82573 controllers */
 563         if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
 564                                (hw->mac.type == e1000_82573)))
 565                 e1000e_update_nvm_checksum(hw);
 566
 567         kfree(eeprom_buff);
 568         return ret_val;
 569 }
 570
 571 static void e1000_get_drvinfo(struct net_device *netdev,
 572                               struct ethtool_drvinfo *drvinfo)
 573 {
 574         struct e1000_adapter *adapter = netdev_priv(netdev);
 575         char firmware_version[32];
 576         u16 eeprom_data;
 577
 578         strncpy(drvinfo->driver,  e1000e_driver_name, 32);
 579         strncpy(drvinfo->version, e1000e_driver_version, 32);
 580
 581         /* EEPROM image version # is reported as firmware version # for
 582          * PCI-E controllers */
 583         e1000_read_nvm(&adapter->hw, 5, 1, &eeprom_data);
 584         sprintf(firmware_version, "%d.%d-%d",
 585                 (eeprom_data & 0xF000) >> 12,
 586                 (eeprom_data & 0x0FF0) >> 4,
 587                 eeprom_data & 0x000F);
 588
 589         strncpy(drvinfo->fw_version, firmware_version, 32);
 590         strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 591         drvinfo->regdump_len = e1000_get_regs_len(netdev);
 592         drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
 593 }
 594
 595 static void e1000_get_ringparam(struct net_device *netdev,
 596                                 struct ethtool_ringparam *ring)
 597 {
 598         struct e1000_adapter *adapter = netdev_priv(netdev);
 599         struct e1000_ring *tx_ring = adapter->tx_ring;
 600         struct e1000_ring *rx_ring = adapter->rx_ring;
 601
 602         ring->rx_max_pending = E1000_MAX_RXD;
 603         ring->tx_max_pending = E1000_MAX_TXD;
 604         ring->rx_mini_max_pending = 0;
 605         ring->rx_jumbo_max_pending = 0;
 606         ring->rx_pending = rx_ring->count;
 607         ring->tx_pending = tx_ring->count;
 608         ring->rx_mini_pending = 0;
 609         ring->rx_jumbo_pending = 0;
 610 }
 611
 612 static int e1000_set_ringparam(struct net_device *netdev,
 613                                struct ethtool_ringparam *ring)
 614 {
 615         struct e1000_adapter *adapter = netdev_priv(netdev);
 616         struct e1000_ring *tx_ring, *tx_old;
 617         struct e1000_ring *rx_ring, *rx_old;
 618         int err;
 619
 620         if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 621                 return -EINVAL;
 622
 623         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 624                 msleep(1);
 625
 626         if (netif_running(adapter->netdev))
 627                 e1000e_down(adapter);
 628
 629         tx_old = adapter->tx_ring;
 630         rx_old = adapter->rx_ring;
 631
 632         err = -ENOMEM;
 633         tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
 634         if (!tx_ring)
 635                 goto err_alloc_tx;
 636
 637         rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
 638         if (!rx_ring)
 639                 goto err_alloc_rx;
 640
 641         adapter->tx_ring = tx_ring;
 642         adapter->rx_ring = rx_ring;
 643
 644         rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
 645         rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
 646         rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 647
 648         tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
 649         tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
 650         tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 651
 652         if (netif_running(adapter->netdev)) {
 653                 /* Try to get new resources before deleting old */
 654                 err = e1000e_setup_rx_resources(adapter);
 655                 if (err)
 656                         goto err_setup_rx;
 657                 err = e1000e_setup_tx_resources(adapter);
 658                 if (err)
 659                         goto err_setup_tx;
 660
 661                 /* save the new, restore the old in order to free it,
 662                  * then restore the new back again */
 663                 adapter->rx_ring = rx_old;
 664                 adapter->tx_ring = tx_old;
 665                 e1000e_free_rx_resources(adapter);
 666                 e1000e_free_tx_resources(adapter);
 667                 kfree(tx_old);
 668                 kfree(rx_old);
 669                 adapter->rx_ring = rx_ring;
 670                 adapter->tx_ring = tx_ring;
 671                 err = e1000e_up(adapter);
 672                 if (err)
 673                         goto err_setup;
 674         }
 675
 676         clear_bit(__E1000_RESETTING, &adapter->state);
 677         return 0;
 678 err_setup_tx:
 679         e1000e_free_rx_resources(adapter);
 680 err_setup_rx:
 681         adapter->rx_ring = rx_old;
 682         adapter->tx_ring = tx_old;
 683         kfree(rx_ring);
 684 err_alloc_rx:
 685         kfree(tx_ring);
 686 err_alloc_tx:
 687         e1000e_up(adapter);
 688 err_setup:
 689         clear_bit(__E1000_RESETTING, &adapter->state);
 690         return err;
 691 }
 692
 693 bool reg_pattern_test_array(struct e1000_adapter *adapter, u64 *data,
 694                             int reg, int offset, u32 mask, u32 write)
 695 {
 696         int i;
 697         u32 read;
 698         static const u32 test[] =
 699                 {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
 700         for (i = 0; i < ARRAY_SIZE(test); i++) {
 701                 E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
 702                                       (test[i] & write));
 703                 read = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
 704                 if (read != (test[i] & write & mask)) {
 705                         ndev_err(adapter->netdev, "pattern test reg %04X "
 706                                  "failed: got 0x%08X expected 0x%08X\n",
 707                                  reg + offset,
 708                                  read, (test[i] & write & mask));
 709                         *data = reg;
 710                         return true;
 711                 }
 712         }
 713         return false;
 714 }
 715
 716 static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
 717                               int reg, u32 mask, u32 write)
 718 {
 719         u32 read;
 720         __ew32(&adapter->hw, reg, write & mask);
 721         read = __er32(&adapter->hw, reg);
 722         if ((write & mask) != (read & mask)) {
 723                 ndev_err(adapter->netdev, "set/check reg %04X test failed: "
 724                          "got 0x%08X expected 0x%08X\n", reg, (read & mask),
 725                          (write & mask));
 726                 *data = reg;
 727                 return true;
 728         }
 729         return false;
 730 }
 731
 732 #define REG_PATTERN_TEST(R, M, W) \
 733         do { \
 734                 if (reg_pattern_test_array(adapter, data, R, 0, M, W)) \
 735                         return 1; \
 736         } while (0)
 737
 738 #define REG_PATTERN_TEST_ARRAY(R, offset, M, W) \
 739         do { \
 740                 if (reg_pattern_test_array(adapter, data, R, offset, M, W)) \
 741                         return 1; \
 742         } while (0)
 743
 744 #define REG_SET_AND_CHECK(R, M, W) \
 745         do { \
 746                 if (reg_set_and_check(adapter, data, R, M, W)) \
 747                         return 1; \
 748         } while (0)
 749
 750 static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 751 {
 752         struct e1000_hw *hw = &adapter->hw;
 753         struct e1000_mac_info *mac = &adapter->hw.mac;
 754         struct net_device *netdev = adapter->netdev;
 755         u32 value;
 756         u32 before;
 757         u32 after;
 758         u32 i;
 759         u32 toggle;
 760
 761         /* The status register is Read Only, so a write should fail.
 762          * Some bits that get toggled are ignored.
 763          */
 764         switch (mac->type) {
 765         /* there are several bits on newer hardware that are r/w */
 766         case e1000_82571:
 767         case e1000_82572:
 768         case e1000_80003es2lan:
 769                 toggle = 0x7FFFF3FF;
 770                 break;
 771         case e1000_82573:
 772         case e1000_ich8lan:
 773         case e1000_ich9lan:
 774                 toggle = 0x7FFFF033;
 775                 break;
 776         default:
 777                 toggle = 0xFFFFF833;
 778                 break;
 779         }
 780
 781         before = er32(STATUS);
 782         value = (er32(STATUS) & toggle);
 783         ew32(STATUS, toggle);
 784         after = er32(STATUS) & toggle;
 785         if (value != after) {
 786                 ndev_err(netdev, "failed STATUS register test got: "
 787                          "0x%08X expected: 0x%08X\n", after, value);
 788                 *data = 1;
 789                 return 1;
 790         }
 791         /* restore previous status */
 792         ew32(STATUS, before);
 793
 794         if ((mac->type != e1000_ich8lan) &&
 795             (mac->type != e1000_ich9lan)) {
 796                 REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 797                 REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
 798                 REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
 799                 REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
 800         }
 801
 802         REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
 803         REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 804         REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF);
 805         REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF);
 806         REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF);
 807         REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
 808         REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
 809         REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
 810         REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 811         REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF);
 812
 813         REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
 814
 815         before = (((mac->type == e1000_ich8lan) ||
 816                    (mac->type == e1000_ich9lan)) ? 0x06C3B33E : 0x06DFB3FE);
 817         REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
 818         REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
 819
 820         REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
 821         REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 822         if ((mac->type != e1000_ich8lan) &&
 823             (mac->type != e1000_ich9lan))
 824                 REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
 825         REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 826         REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
 827         for (i = 0; i < mac->rar_entry_count; i++)
 828                 REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
 829                                        0x8003FFFF, 0xFFFFFFFF);
 830
 831         for (i = 0; i < mac->mta_reg_count; i++)
 832                 REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
 833
 834         *data = 0;
 835         return 0;
 836 }
 837
 838 static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 839 {
 840         u16 temp;
 841         u16 checksum = 0;
 842         u16 i;
 843
 844         *data = 0;
 845         /* Read and add up the contents of the EEPROM */
 846         for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
 847                 if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
 848                         *data = 1;
 849                         break;
 850                 }
 851                 checksum += temp;
 852         }
 853
 854         /* If Checksum is not Correct return error else test passed */
 855         if ((checksum != (u16) NVM_SUM) && !(*data))
 856                 *data = 2;
 857
 858         return *data;
 859 }
 860
 861 static irqreturn_t e1000_test_intr(int irq, void *data)
 862 {
 863         struct net_device *netdev = (struct net_device *) data;
 864         struct e1000_adapter *adapter = netdev_priv(netdev);
 865         struct e1000_hw *hw = &adapter->hw;
 866
 867         adapter->test_icr |= er32(ICR);
 868
 869         return IRQ_HANDLED;
 870 }
 871
 872 static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 873 {
 874         struct net_device *netdev = adapter->netdev;
 875         struct e1000_hw *hw = &adapter->hw;
 876         u32 mask;
 877         u32 shared_int = 1;
 878         u32 irq = adapter->pdev->irq;
 879         int i;
 880
 881         *data = 0;
 882
 883         /* NOTE: we don't test MSI interrupts here, yet */
 884         /* Hook up test interrupt handler just for this test */
 885         if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
 886                          netdev)) {
 887                 shared_int = 0;
 888         } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
 889                  netdev->name, netdev)) {
 890                 *data = 1;
 891                 return -1;
 892         }
 893         ndev_info(netdev, "testing %s interrupt\n",
 894                   (shared_int ? "shared" : "unshared"));
 895
 896         /* Disable all the interrupts */
 897         ew32(IMC, 0xFFFFFFFF);
 898         msleep(10);
 899
 900         /* Test each interrupt */
 901         for (i = 0; i < 10; i++) {
 902
 903                 if (((adapter->hw.mac.type == e1000_ich8lan) ||
 904                      (adapter->hw.mac.type == e1000_ich9lan)) && i == 8)
 905                         continue;
 906
 907                 /* Interrupt to test */
 908                 mask = 1 << i;
 909
 910                 if (!shared_int) {
 911                         /* Disable the interrupt to be reported in
 912                          * the cause register and then force the same
 913                          * interrupt and see if one gets posted.  If
 914                          * an interrupt was posted to the bus, the
 915                          * test failed.
 916                          */
 917                         adapter->test_icr = 0;
 918                         ew32(IMC, mask);
 919                         ew32(ICS, mask);
 920                         msleep(10);
 921
 922                         if (adapter->test_icr & mask) {
 923                                 *data = 3;
 924                                 break;
 925                         }
 926                 }
 927
 928                 /* Enable the interrupt to be reported in
 929                  * the cause register and then force the same
 930                  * interrupt and see if one gets posted.  If
 931                  * an interrupt was not posted to the bus, the
 932                  * test failed.
 933                  */
 934                 adapter->test_icr = 0;
 935                 ew32(IMS, mask);
 936                 ew32(ICS, mask);
 937                 msleep(10);
 938
 939                 if (!(adapter->test_icr & mask)) {
 940                         *data = 4;
 941                         break;
 942                 }
 943
 944                 if (!shared_int) {
 945                         /* Disable the other interrupts to be reported in
 946                          * the cause register and then force the other
 947                          * interrupts and see if any get posted.  If
 948                          * an interrupt was posted to the bus, the
 949                          * test failed.
 950                          */
 951                         adapter->test_icr = 0;
 952                         ew32(IMC, ~mask & 0x00007FFF);
 953                         ew32(ICS, ~mask & 0x00007FFF);
 954                         msleep(10);
 955
 956                         if (adapter->test_icr) {
 957                                 *data = 5;
 958                                 break;
 959                         }
 960                 }
 961         }
 962
 963         /* Disable all the interrupts */
 964         ew32(IMC, 0xFFFFFFFF);
 965         msleep(10);
 966
 967         /* Unhook test interrupt handler */
 968         free_irq(irq, netdev);
 969
 970         return *data;
 971 }
 972
 973 static void e1000_free_desc_rings(struct e1000_adapter *adapter)
 974 {
 975         struct e1000_ring *tx_ring = &adapter->test_tx_ring;
 976         struct e1000_ring *rx_ring = &adapter->test_rx_ring;
 977         struct pci_dev *pdev = adapter->pdev;
 978         int i;
 979
 980         if (tx_ring->desc && tx_ring->buffer_info) {
 981                 for (i = 0; i < tx_ring->count; i++) {
 982                         if (tx_ring->buffer_info[i].dma)
 983                                 pci_unmap_single(pdev,
 984                                         tx_ring->buffer_info[i].dma,
 985                                         tx_ring->buffer_info[i].length,
 986                                         PCI_DMA_TODEVICE);
 987                         if (tx_ring->buffer_info[i].skb)
 988                                 dev_kfree_skb(tx_ring->buffer_info[i].skb);
 989                 }
 990         }
 991
 992         if (rx_ring->desc && rx_ring->buffer_info) {
 993                 for (i = 0; i < rx_ring->count; i++) {
 994                         if (rx_ring->buffer_info[i].dma)
 995                                 pci_unmap_single(pdev,
 996                                         rx_ring->buffer_info[i].dma,
 997                                         2048, PCI_DMA_FROMDEVICE);
 998                         if (rx_ring->buffer_info[i].skb)
 999                                 dev_kfree_skb(rx_ring->buffer_info[i].skb);
1000                 }
1001         }
1002
1003         if (tx_ring->desc) {
1004                 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1005                                   tx_ring->dma);
1006                 tx_ring->desc = NULL;
1007         }
1008         if (rx_ring->desc) {
1009                 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
1010                                   rx_ring->dma);
1011                 rx_ring->desc = NULL;
1012         }
1013
1014         kfree(tx_ring->buffer_info);
1015         tx_ring->buffer_info = NULL;
1016         kfree(rx_ring->buffer_info);
1017         rx_ring->buffer_info = NULL;
1018 }
1019
1020 static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
1021 {
1022         struct e1000_ring *tx_ring = &adapter->test_tx_ring;
1023         struct e1000_ring *rx_ring = &adapter->test_rx_ring;
1024         struct pci_dev *pdev = adapter->pdev;
1025         struct e1000_hw *hw = &adapter->hw;
1026         u32 rctl;
1027         int size;
1028         int i;
1029         int ret_val;
1030
1031         /* Setup Tx descriptor ring and Tx buffers */
1032
1033         if (!tx_ring->count)
1034                 tx_ring->count = E1000_DEFAULT_TXD;
1035
1036         size = tx_ring->count * sizeof(struct e1000_buffer);
1037         tx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
1038         if (!tx_ring->buffer_info) {
1039                 ret_val = 1;
1040                 goto err_nomem;
1041         }
1042         memset(tx_ring->buffer_info, 0, size);
1043
1044         tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
1045         tx_ring->size = ALIGN(tx_ring->size, 4096);
1046         tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
1047                                            &tx_ring->dma, GFP_KERNEL);
1048         if (!tx_ring->desc) {
1049                 ret_val = 2;
1050                 goto err_nomem;
1051         }
1052         memset(tx_ring->desc, 0, tx_ring->size);
1053         tx_ring->next_to_use = 0;
1054         tx_ring->next_to_clean = 0;
1055
1056         ew32(TDBAL,
1057                         ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
1058         ew32(TDBAH, ((u64) tx_ring->dma >> 32));
1059         ew32(TDLEN,
1060                         tx_ring->count * sizeof(struct e1000_tx_desc));
1061         ew32(TDH, 0);
1062         ew32(TDT, 0);
1063         ew32(TCTL,
1064                         E1000_TCTL_PSP | E1000_TCTL_EN |
1065                         E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
1066                         E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
1067
1068         for (i = 0; i < tx_ring->count; i++) {
1069                 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
1070                 struct sk_buff *skb;
1071                 unsigned int skb_size = 1024;
1072
1073                 skb = alloc_skb(skb_size, GFP_KERNEL);
1074                 if (!skb) {
1075                         ret_val = 3;
1076                         goto err_nomem;
1077                 }
1078                 skb_put(skb, skb_size);
1079                 tx_ring->buffer_info[i].skb = skb;
1080                 tx_ring->buffer_info[i].length = skb->len;
1081                 tx_ring->buffer_info[i].dma =
1082                         pci_map_single(pdev, skb->data, skb->len,
1083                                        PCI_DMA_TODEVICE);
1084                 if (pci_dma_mapping_error(tx_ring->buffer_info[i].dma)) {
1085                         ret_val = 4;
1086                         goto err_nomem;
1087                 }
1088                 tx_desc->buffer_addr = cpu_to_le64(
1089                                          tx_ring->buffer_info[i].dma);
1090                 tx_desc->lower.data = cpu_to_le32(skb->len);
1091                 tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
1092                                                    E1000_TXD_CMD_IFCS |
1093                                                    E1000_TXD_CMD_RPS);
1094                 tx_desc->upper.data = 0;
1095         }
1096
1097         /* Setup Rx descriptor ring and Rx buffers */
1098
1099         if (!rx_ring->count)
1100                 rx_ring->count = E1000_DEFAULT_RXD;
1101
1102         size = rx_ring->count * sizeof(struct e1000_buffer);
1103         rx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
1104         if (!rx_ring->buffer_info) {
1105                 ret_val = 5;
1106                 goto err_nomem;
1107         }
1108         memset(rx_ring->buffer_info, 0, size);
1109
1110         rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
1111         rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
1112                                            &rx_ring->dma, GFP_KERNEL);
1113         if (!rx_ring->desc) {
1114                 ret_val = 6;
1115                 goto err_nomem;
1116         }
1117         memset(rx_ring->desc, 0, rx_ring->size);
1118         rx_ring->next_to_use = 0;
1119         rx_ring->next_to_clean = 0;
1120
1121         rctl = er32(RCTL);
1122         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1123         ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
1124         ew32(RDBAH, ((u64) rx_ring->dma >> 32));
1125         ew32(RDLEN, rx_ring->size);
1126         ew32(RDH, 0);
1127         ew32(RDT, 0);
1128         rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
1129                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1130                 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
1131         ew32(RCTL, rctl);
1132
1133         for (i = 0; i < rx_ring->count; i++) {
1134                 struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
1135                 struct sk_buff *skb;
1136
1137                 skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
1138                 if (!skb) {
1139                         ret_val = 7;
1140                         goto err_nomem;
1141                 }
1142                 skb_reserve(skb, NET_IP_ALIGN);
1143                 rx_ring->buffer_info[i].skb = skb;
1144                 rx_ring->buffer_info[i].dma =
1145                         pci_map_single(pdev, skb->data, 2048,
1146                                        PCI_DMA_FROMDEVICE);
1147                 if (pci_dma_mapping_error(rx_ring->buffer_info[i].dma)) {
1148                         ret_val = 8;
1149                         goto err_nomem;
1150                 }
1151                 rx_desc->buffer_addr =
1152                         cpu_to_le64(rx_ring->buffer_info[i].dma);
1153                 memset(skb->data, 0x00, skb->len);
1154         }
1155
1156         return 0;
1157
1158 err_nomem:
1159         e1000_free_desc_rings(adapter);
1160         return ret_val;
1161 }
1162
1163 static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
1164 {
1165         /* Write out to PHY registers 29 and 30 to disable the Receiver. */
1166         e1e_wphy(&adapter->hw, 29, 0x001F);
1167         e1e_wphy(&adapter->hw, 30, 0x8FFC);
1168         e1e_wphy(&adapter->hw, 29, 0x001A);
1169         e1e_wphy(&adapter->hw, 30, 0x8FF0);
1170 }
1171
1172 static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
1173 {
1174         struct e1000_hw *hw = &adapter->hw;
1175         u32 ctrl_reg = 0;
1176         u32 stat_reg = 0;
1177
1178         adapter->hw.mac.autoneg = 0;
1179
1180         if (adapter->hw.phy.type == e1000_phy_m88) {
1181                 /* Auto-MDI/MDIX Off */
1182                 e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
1183                 /* reset to update Auto-MDI/MDIX */
1184                 e1e_wphy(hw, PHY_CONTROL, 0x9140);
1185                 /* autoneg off */
1186                 e1e_wphy(hw, PHY_CONTROL, 0x8140);
1187         } else if (adapter->hw.phy.type == e1000_phy_gg82563)
1188                 e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
1189
1190         ctrl_reg = er32(CTRL);
1191
1192         if (adapter->hw.phy.type == e1000_phy_ife) {
1193                 /* force 100, set loopback */
1194                 e1e_wphy(hw, PHY_CONTROL, 0x6100);
1195
1196                 /* Now set up the MAC to the same speed/duplex as the PHY. */
1197                 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
1198                 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
1199                              E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
1200                              E1000_CTRL_SPD_100 |/* Force Speed to 100 */
1201                              E1000_CTRL_FD);     /* Force Duplex to FULL */
1202         } else {
1203                 /* force 1000, set loopback */
1204                 e1e_wphy(hw, PHY_CONTROL, 0x4140);
1205
1206                 /* Now set up the MAC to the same speed/duplex as the PHY. */
1207                 ctrl_reg = er32(CTRL);
1208                 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
1209                 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
1210                              E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
1211                              E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
1212                              E1000_CTRL_FD);     /* Force Duplex to FULL */
1213         }
1214
1215         if (adapter->hw.media_type == e1000_media_type_copper &&
1216            adapter->hw.phy.type == e1000_phy_m88) {
1217                 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
1218         } else {
1219                 /* Set the ILOS bit on the fiber Nic if half duplex link is
1220                  * detected. */
1221                 stat_reg = er32(STATUS);
1222                 if ((stat_reg & E1000_STATUS_FD) == 0)
1223                         ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
1224         }
1225
1226         ew32(CTRL, ctrl_reg);
1227
1228         /* Disable the receiver on the PHY so when a cable is plugged in, the
1229          * PHY does not begin to autoneg when a cable is reconnected to the NIC.
1230          */
1231         if (adapter->hw.phy.type == e1000_phy_m88)
1232                 e1000_phy_disable_receiver(adapter);
1233
1234         udelay(500);
1235
1236         return 0;
1237 }
1238
1239 static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
1240 {
1241         struct e1000_hw *hw = &adapter->hw;
1242         u32 ctrl = er32(CTRL);
1243         int link = 0;
1244
1245         /* special requirements for 82571/82572 fiber adapters */
1246
1247         /* jump through hoops to make sure link is up because serdes
1248          * link is hardwired up */
1249         ctrl |= E1000_CTRL_SLU;
1250         ew32(CTRL, ctrl);
1251
1252         /* disable autoneg */
1253         ctrl = er32(TXCW);
1254         ctrl &= ~(1 << 31);
1255         ew32(TXCW, ctrl);
1256
1257         link = (er32(STATUS) & E1000_STATUS_LU);
1258
1259         if (!link) {
1260                 /* set invert loss of signal */
1261                 ctrl = er32(CTRL);
1262                 ctrl |= E1000_CTRL_ILOS;
1263                 ew32(CTRL, ctrl);
1264         }
1265
1266         /* special write to serdes control register to enable SerDes analog
1267          * loopback */
1268 #define E1000_SERDES_LB_ON 0x410
1269         ew32(SCTL, E1000_SERDES_LB_ON);
1270         msleep(10);
1271
1272         return 0;
1273 }
1274
1275 /* only call this for fiber/serdes connections to es2lan */
1276 static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
1277 {
1278         struct e1000_hw *hw = &adapter->hw;
1279         u32 ctrlext = er32(CTRL_EXT);
1280         u32 ctrl = er32(CTRL);
1281
1282         /* save CTRL_EXT to restore later, reuse an empty variable (unused
1283            on mac_type 80003es2lan) */
1284         adapter->tx_fifo_head = ctrlext;
1285
1286         /* clear the serdes mode bits, putting the device into mac loopback */
1287         ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
1288         ew32(CTRL_EXT, ctrlext);
1289
1290         /* force speed to 1000/FD, link up */
1291         ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
1292         ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
1293                  E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
1294         ew32(CTRL, ctrl);
1295
1296         /* set mac loopback */
1297         ctrl = er32(RCTL);
1298         ctrl |= E1000_RCTL_LBM_MAC;
1299         ew32(RCTL, ctrl);
1300
1301         /* set testing mode parameters (no need to reset later) */
1302 #define KMRNCTRLSTA_OPMODE (0x1F << 16)
1303 #define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
1304         ew32(KMRNCTRLSTA,
1305                 (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
1306
1307         return 0;
1308 }
1309
1310 static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
1311 {
1312         struct e1000_hw *hw = &adapter->hw;
1313         u32 rctl;
1314
1315         if (hw->media_type == e1000_media_type_fiber ||
1316             hw->media_type == e1000_media_type_internal_serdes) {
1317                 switch (hw->mac.type) {
1318                 case e1000_80003es2lan:
1319                         return e1000_set_es2lan_mac_loopback(adapter);
1320                         break;
1321                 case e1000_82571:
1322                 case e1000_82572:
1323                         return e1000_set_82571_fiber_loopback(adapter);
1324                         break;
1325                 default:
1326                         rctl = er32(RCTL);
1327                         rctl |= E1000_RCTL_LBM_TCVR;
1328                         ew32(RCTL, rctl);
1329                         return 0;
1330                 }
1331         } else if (hw->media_type == e1000_media_type_copper) {
1332                 return e1000_integrated_phy_loopback(adapter);
1333         }
1334
1335         return 7;
1336 }
1337
1338 static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
1339 {
1340         struct e1000_hw *hw = &adapter->hw;
1341         u32 rctl;
1342         u16 phy_reg;
1343
1344         rctl = er32(RCTL);
1345         rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
1346         ew32(RCTL, rctl);
1347
1348         switch (hw->mac.type) {
1349         case e1000_80003es2lan:
1350                 if (hw->media_type == e1000_media_type_fiber ||
1351                     hw->media_type == e1000_media_type_internal_serdes) {
1352                         /* restore CTRL_EXT, stealing space from tx_fifo_head */
1353                         ew32(CTRL_EXT,
1354                                         adapter->tx_fifo_head);
1355                         adapter->tx_fifo_head = 0;
1356                 }
1357                 /* fall through */
1358         case e1000_82571:
1359         case e1000_82572:
1360                 if (hw->media_type == e1000_media_type_fiber ||
1361                     hw->media_type == e1000_media_type_internal_serdes) {
1362 #define E1000_SERDES_LB_OFF 0x400
1363                         ew32(SCTL, E1000_SERDES_LB_OFF);
1364                         msleep(10);
1365                         break;
1366                 }
1367                 /* Fall Through */
1368         default:
1369                 hw->mac.autoneg = 1;
1370                 if (hw->phy.type == e1000_phy_gg82563)
1371                         e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
1372                 e1e_rphy(hw, PHY_CONTROL, &phy_reg);
1373                 if (phy_reg & MII_CR_LOOPBACK) {
1374                         phy_reg &= ~MII_CR_LOOPBACK;
1375                         e1e_wphy(hw, PHY_CONTROL, phy_reg);
1376                         e1000e_commit_phy(hw);
1377                 }
1378                 break;
1379         }
1380 }
1381
1382 static void e1000_create_lbtest_frame(struct sk_buff *skb,
1383                                       unsigned int frame_size)
1384 {
1385         memset(skb->data, 0xFF, frame_size);
1386         frame_size &= ~1;
1387         memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
1388         memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
1389         memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
1390 }
1391
1392 static int e1000_check_lbtest_frame(struct sk_buff *skb,
1393                                     unsigned int frame_size)
1394 {
1395         frame_size &= ~1;
1396         if (*(skb->data + 3) == 0xFF)
1397                 if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
1398                    (*(skb->data + frame_size / 2 + 12) == 0xAF))
1399                         return 0;
1400         return 13;
1401 }
1402
1403 static int e1000_run_loopback_test(struct e1000_adapter *adapter)
1404 {
1405         struct e1000_ring *tx_ring = &adapter->test_tx_ring;
1406         struct e1000_ring *rx_ring = &adapter->test_rx_ring;
1407         struct pci_dev *pdev = adapter->pdev;
1408         struct e1000_hw *hw = &adapter->hw;
1409         int i, j, k, l;
1410         int lc;
1411         int good_cnt;
1412         int ret_val = 0;
1413         unsigned long time;
1414
1415         ew32(RDT, rx_ring->count - 1);
1416
1417         /* Calculate the loop count based on the largest descriptor ring
1418          * The idea is to wrap the largest ring a number of times using 64
1419          * send/receive pairs during each loop
1420          */
1421
1422         if (rx_ring->count <= tx_ring->count)
1423                 lc = ((tx_ring->count / 64) * 2) + 1;
1424         else
1425                 lc = ((rx_ring->count / 64) * 2) + 1;
1426
1427         k = 0;
1428         l = 0;
1429         for (j = 0; j <= lc; j++) { /* loop count loop */
1430                 for (i = 0; i < 64; i++) { /* send the packets */
1431                         e1000_create_lbtest_frame(
1432                                 tx_ring->buffer_info[i].skb, 1024);
1433                         pci_dma_sync_single_for_device(pdev,
1434                                         tx_ring->buffer_info[k].dma,
1435                                         tx_ring->buffer_info[k].length,
1436                                         PCI_DMA_TODEVICE);
1437                         k++;
1438                         if (k == tx_ring->count)
1439                                 k = 0;
1440                 }
1441                 ew32(TDT, k);
1442                 msleep(200);
1443                 time = jiffies; /* set the start time for the receive */
1444                 good_cnt = 0;
1445                 do { /* receive the sent packets */
1446                         pci_dma_sync_single_for_cpu(pdev,
1447                                         rx_ring->buffer_info[l].dma, 2048,
1448                                         PCI_DMA_FROMDEVICE);
1449
1450                         ret_val = e1000_check_lbtest_frame(
1451                                         rx_ring->buffer_info[l].skb, 1024);
1452                         if (!ret_val)
1453                                 good_cnt++;
1454                         l++;
1455                         if (l == rx_ring->count)
1456                                 l = 0;
1457                         /* time + 20 msecs (200 msecs on 2.4) is more than
1458                          * enough time to complete the receives, if it's
1459                          * exceeded, break and error off
1460                          */
1461                 } while ((good_cnt < 64) && !time_after(jiffies, time + 20));
1462                 if (good_cnt != 64) {
1463                         ret_val = 13; /* ret_val is the same as mis-compare */
1464                         break;
1465                 }
1466                 if (jiffies >= (time + 2)) {
1467                         ret_val = 14; /* error code for time out error */
1468                         break;
1469                 }
1470         } /* end loop count loop */
1471         return ret_val;
1472 }
1473
1474 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
1475 {
1476         /* PHY loopback cannot be performed if SoL/IDER
1477          * sessions are active */
1478         if (e1000_check_reset_block(&adapter->hw)) {
1479                 ndev_err(adapter->netdev, "Cannot do PHY loopback test "
1480                          "when SoL/IDER is active.\n");
1481                 *data = 0;
1482                 goto out;
1483         }
1484
1485         *data = e1000_setup_desc_rings(adapter);
1486         if (*data)
1487                 goto out;
1488
1489         *data = e1000_setup_loopback_test(adapter);
1490         if (*data)
1491                 goto err_loopback;
1492
1493         *data = e1000_run_loopback_test(adapter);
1494         e1000_loopback_cleanup(adapter);
1495
1496 err_loopback:
1497         e1000_free_desc_rings(adapter);
1498 out:
1499         return *data;
1500 }
1501
1502 static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
1503 {
1504         struct e1000_hw *hw = &adapter->hw;
1505
1506         *data = 0;
1507         if (hw->media_type == e1000_media_type_internal_serdes) {
1508                 int i = 0;
1509                 hw->mac.serdes_has_link = 0;
1510
1511                 /* On some blade server designs, link establishment
1512                  * could take as long as 2-3 minutes */
1513                 do {
1514                         hw->mac.ops.check_for_link(hw);
1515                         if (hw->mac.serdes_has_link)
1516                                 return *data;
1517                         msleep(20);
1518                 } while (i++ < 3750);
1519
1520                 *data = 1;
1521         } else {
1522                 hw->mac.ops.check_for_link(hw);
1523                 if (hw->mac.autoneg)
1524                         msleep(4000);
1525
1526                 if (!(er32(STATUS) &
1527                       E1000_STATUS_LU))
1528                         *data = 1;
1529         }
1530         return *data;
1531 }
1532
1533 static int e1000e_get_sset_count(struct net_device *netdev, int sset)
1534 {
1535         switch (sset) {
1536         case ETH_SS_TEST:
1537                 return E1000_TEST_LEN;
1538         case ETH_SS_STATS:
1539                 return E1000_STATS_LEN;
1540         default:
1541                 return -EOPNOTSUPP;
1542         }
1543 }
1544
1545 static void e1000_diag_test(struct net_device *netdev,
1546                             struct ethtool_test *eth_test, u64 *data)
1547 {
1548         struct e1000_adapter *adapter = netdev_priv(netdev);
1549         u16 autoneg_advertised;
1550         u8 forced_speed_duplex;
1551         u8 autoneg;
1552         bool if_running = netif_running(netdev);
1553
1554         set_bit(__E1000_TESTING, &adapter->state);
1555         if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
1556                 /* Offline tests */
1557
1558                 /* save speed, duplex, autoneg settings */
1559                 autoneg_advertised = adapter->hw.phy.autoneg_advertised;
1560                 forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
1561                 autoneg = adapter->hw.mac.autoneg;
1562
1563                 ndev_info(netdev, "offline testing starting\n");
1564
1565                 /* Link test performed before hardware reset so autoneg doesn't
1566                  * interfere with test result */
1567                 if (e1000_link_test(adapter, &data[4]))
1568                         eth_test->flags |= ETH_TEST_FL_FAILED;
1569
1570                 if (if_running)
1571                         /* indicate we're in test mode */
1572                         dev_close(netdev);
1573                 else
1574                         e1000e_reset(adapter);
1575
1576                 if (e1000_reg_test(adapter, &data[0]))
1577                         eth_test->flags |= ETH_TEST_FL_FAILED;
1578
1579                 e1000e_reset(adapter);
1580                 if (e1000_eeprom_test(adapter, &data[1]))
1581                         eth_test->flags |= ETH_TEST_FL_FAILED;
1582
1583                 e1000e_reset(adapter);
1584                 if (e1000_intr_test(adapter, &data[2]))
1585                         eth_test->flags |= ETH_TEST_FL_FAILED;
1586
1587                 e1000e_reset(adapter);
1588                 /* make sure the phy is powered up */
1589                 e1000e_power_up_phy(adapter);
1590                 if (e1000_loopback_test(adapter, &data[3]))
1591                         eth_test->flags |= ETH_TEST_FL_FAILED;
1592
1593                 /* restore speed, duplex, autoneg settings */
1594                 adapter->hw.phy.autoneg_advertised = autoneg_advertised;
1595                 adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
1596                 adapter->hw.mac.autoneg = autoneg;
1597
1598                 /* force this routine to wait until autoneg complete/timeout */
1599                 adapter->hw.phy.wait_for_link = 1;
1600                 e1000e_reset(adapter);
1601                 adapter->hw.phy.wait_for_link = 0;
1602
1603                 clear_bit(__E1000_TESTING, &adapter->state);
1604                 if (if_running)
1605                         dev_open(netdev);
1606         } else {
1607                 ndev_info(netdev, "online testing starting\n");
1608                 /* Online tests */
1609                 if (e1000_link_test(adapter, &data[4]))
1610                         eth_test->flags |= ETH_TEST_FL_FAILED;
1611
1612                 /* Online tests aren't run; pass by default */
1613                 data[0] = 0;
1614                 data[1] = 0;
1615                 data[2] = 0;
1616                 data[3] = 0;
1617
1618                 clear_bit(__E1000_TESTING, &adapter->state);
1619         }
1620         msleep_interruptible(4 * 1000);
1621 }
1622
1623 static void e1000_get_wol(struct net_device *netdev,
1624                           struct ethtool_wolinfo *wol)
1625 {
1626         struct e1000_adapter *adapter = netdev_priv(netdev);
1627
1628         wol->supported = 0;
1629         wol->wolopts = 0;
1630
1631         if (!(adapter->flags & FLAG_HAS_WOL))
1632                 return;
1633
1634         wol->supported = WAKE_UCAST | WAKE_MCAST |
1635                          WAKE_BCAST | WAKE_MAGIC;
1636
1637         /* apply any specific unsupported masks here */
1638         if (adapter->flags & FLAG_NO_WAKE_UCAST) {
1639                 wol->supported &= ~WAKE_UCAST;
1640
1641                 if (adapter->wol & E1000_WUFC_EX)
1642                         ndev_err(netdev, "Interface does not support "
1643                                  "directed (unicast) frame wake-up packets\n");
1644         }
1645
1646         if (adapter->wol & E1000_WUFC_EX)
1647                 wol->wolopts |= WAKE_UCAST;
1648         if (adapter->wol & E1000_WUFC_MC)
1649                 wol->wolopts |= WAKE_MCAST;
1650         if (adapter->wol & E1000_WUFC_BC)
1651                 wol->wolopts |= WAKE_BCAST;
1652         if (adapter->wol & E1000_WUFC_MAG)
1653                 wol->wolopts |= WAKE_MAGIC;
1654 }
1655
1656 static int e1000_set_wol(struct net_device *netdev,
1657                          struct ethtool_wolinfo *wol)
1658 {
1659         struct e1000_adapter *adapter = netdev_priv(netdev);
1660
1661         if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
1662                 return -EOPNOTSUPP;
1663
1664         if (!(adapter->flags & FLAG_HAS_WOL))
1665                 return wol->wolopts ? -EOPNOTSUPP : 0;
1666
1667         /* these settings will always override what we currently have */
1668         adapter->wol = 0;
1669
1670         if (wol->wolopts & WAKE_UCAST)
1671                 adapter->wol |= E1000_WUFC_EX;
1672         if (wol->wolopts & WAKE_MCAST)
1673                 adapter->wol |= E1000_WUFC_MC;
1674         if (wol->wolopts & WAKE_BCAST)
1675                 adapter->wol |= E1000_WUFC_BC;
1676         if (wol->wolopts & WAKE_MAGIC)
1677                 adapter->wol |= E1000_WUFC_MAG;
1678
1679         return 0;
1680 }
1681
1682 /* toggle LED 4 times per second = 2 "blinks" per second */
1683 #define E1000_ID_INTERVAL       (HZ/4)
1684
1685 /* bit defines for adapter->led_status */
1686 #define E1000_LED_ON            0
1687
1688 static void e1000_led_blink_callback(unsigned long data)
1689 {
1690         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
1691
1692         if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
1693                 adapter->hw.mac.ops.led_off(&adapter->hw);
1694         else
1695                 adapter->hw.mac.ops.led_on(&adapter->hw);
1696
1697         mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
1698 }
1699
1700 static int e1000_phys_id(struct net_device *netdev, u32 data)
1701 {
1702         struct e1000_adapter *adapter = netdev_priv(netdev);
1703
1704         if (!data)
1705                 data = INT_MAX;
1706
1707         if (adapter->hw.phy.type == e1000_phy_ife) {
1708                 if (!adapter->blink_timer.function) {
1709                         init_timer(&adapter->blink_timer);
1710                         adapter->blink_timer.function =
1711                                 e1000_led_blink_callback;
1712                         adapter->blink_timer.data = (unsigned long) adapter;
1713                 }
1714                 mod_timer(&adapter->blink_timer, jiffies);
1715                 msleep_interruptible(data * 1000);
1716                 del_timer_sync(&adapter->blink_timer);
1717                 e1e_wphy(&adapter->hw,
1718                                     IFE_PHY_SPECIAL_CONTROL_LED, 0);
1719         } else {
1720                 e1000e_blink_led(&adapter->hw);
1721                 msleep_interruptible(data * 1000);
1722         }
1723
1724         adapter->hw.mac.ops.led_off(&adapter->hw);
1725         clear_bit(E1000_LED_ON, &adapter->led_status);
1726         adapter->hw.mac.ops.cleanup_led(&adapter->hw);
1727
1728         return 0;
1729 }
1730
1731 static int e1000_nway_reset(struct net_device *netdev)
1732 {
1733         struct e1000_adapter *adapter = netdev_priv(netdev);
1734         if (netif_running(netdev))
1735                 e1000e_reinit_locked(adapter);
1736         return 0;
1737 }
1738
1739 static void e1000_get_ethtool_stats(struct net_device *netdev,
1740                                     struct ethtool_stats *stats,
1741                                     u64 *data)
1742 {
1743         struct e1000_adapter *adapter = netdev_priv(netdev);
1744         int i;
1745
1746         e1000e_update_stats(adapter);
1747         for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
1748                 char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
1749                 data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
1750                         sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
1751         }
1752 }
1753
1754 static void e1000_get_strings(struct net_device *netdev, u32 stringset,
1755                               u8 *data)
1756 {
1757         u8 *p = data;
1758         int i;
1759
1760         switch (stringset) {
1761         case ETH_SS_TEST:
1762                 memcpy(data, *e1000_gstrings_test,
1763                         sizeof(e1000_gstrings_test));
1764                 break;
1765         case ETH_SS_STATS:
1766                 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
1767                         memcpy(p, e1000_gstrings_stats[i].stat_string,
1768                                ETH_GSTRING_LEN);
1769                         p += ETH_GSTRING_LEN;
1770                 }
1771                 break;
1772         }
1773 }
1774
1775 static const struct ethtool_ops e1000_ethtool_ops = {
1776         .get_settings           = e1000_get_settings,
1777         .set_settings           = e1000_set_settings,
1778         .get_drvinfo            = e1000_get_drvinfo,
1779         .get_regs_len           = e1000_get_regs_len,
1780         .get_regs               = e1000_get_regs,
1781         .get_wol                = e1000_get_wol,
1782         .set_wol                = e1000_set_wol,
1783         .get_msglevel           = e1000_get_msglevel,
1784         .set_msglevel           = e1000_set_msglevel,
1785         .nway_reset             = e1000_nway_reset,
1786         .get_link               = e1000_get_link,
1787         .get_eeprom_len         = e1000_get_eeprom_len,
1788         .get_eeprom             = e1000_get_eeprom,
1789         .set_eeprom             = e1000_set_eeprom,
1790         .get_ringparam          = e1000_get_ringparam,
1791         .set_ringparam          = e1000_set_ringparam,
1792         .get_pauseparam         = e1000_get_pauseparam,
1793         .set_pauseparam         = e1000_set_pauseparam,
1794         .get_rx_csum            = e1000_get_rx_csum,
1795         .set_rx_csum            = e1000_set_rx_csum,
1796         .get_tx_csum            = e1000_get_tx_csum,
1797         .set_tx_csum            = e1000_set_tx_csum,
1798         .get_sg                 = ethtool_op_get_sg,
1799         .set_sg                 = ethtool_op_set_sg,
1800         .get_tso                = ethtool_op_get_tso,
1801         .set_tso                = e1000_set_tso,
1802         .self_test              = e1000_diag_test,
1803         .get_strings            = e1000_get_strings,
1804         .phys_id                = e1000_phys_id,
1805         .get_ethtool_stats      = e1000_get_ethtool_stats,
1806         .get_sset_count         = e1000e_get_sset_count,
1807 };
1808
1809 void e1000e_set_ethtool_ops(struct net_device *netdev)
1810 {
1811         SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
1812 }