drivers/mmc/host/atmel-mci.c

   1 /*
   2  * Atmel MultiMedia Card Interface driver
   3  *
   4  * Copyright (C) 2004-2008 Atmel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/blkdev.h>
  11 #include <linux/clk.h>
  12 #include <linux/debugfs.h>
  13 #include <linux/device.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/dma-mapping.h>
  16 #include <linux/err.h>
  17 #include <linux/gpio.h>
  18 #include <linux/init.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/ioport.h>
  21 #include <linux/module.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/scatterlist.h>
  24 #include <linux/seq_file.h>
  25 #include <linux/stat.h>
  26
  27 #include <linux/mmc/host.h>
  28 #include <linux/atmel-mci.h>
  29
  30 #include <asm/io.h>
  31 #include <asm/unaligned.h>
  32
  33 #include <mach/board.h>
  34
  35 #include "atmel-mci-regs.h"
  36
  37 #define ATMCI_DATA_ERROR_FLAGS  (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
  38 #define ATMCI_DMA_THRESHOLD     16
  39
  40 enum {
  41         EVENT_CMD_COMPLETE = 0,
  42         EVENT_XFER_COMPLETE,
  43         EVENT_DATA_COMPLETE,
  44         EVENT_DATA_ERROR,
  45 };
  46
  47 enum atmel_mci_state {
  48         STATE_IDLE = 0,
  49         STATE_SENDING_CMD,
  50         STATE_SENDING_DATA,
  51         STATE_DATA_BUSY,
  52         STATE_SENDING_STOP,
  53         STATE_DATA_ERROR,
  54 };
  55
  56 struct atmel_mci_dma {
  57 #ifdef CONFIG_MMC_ATMELMCI_DMA
  58         struct dma_chan                 *chan;
  59         struct dma_async_tx_descriptor  *data_desc;
  60 #endif
  61 };
  62
  63 /**
  64  * struct atmel_mci - MMC controller state shared between all slots
  65  * @lock: Spinlock protecting the queue and associated data.
  66  * @regs: Pointer to MMIO registers.
  67  * @sg: Scatterlist entry currently being processed by PIO code, if any.
  68  * @pio_offset: Offset into the current scatterlist entry.
  69  * @cur_slot: The slot which is currently using the controller.
  70  * @mrq: The request currently being processed on @cur_slot,
  71  *      or NULL if the controller is idle.
  72  * @cmd: The command currently being sent to the card, or NULL.
  73  * @data: The data currently being transferred, or NULL if no data
  74  *      transfer is in progress.
  75  * @dma: DMA client state.
  76  * @data_chan: DMA channel being used for the current data transfer.
  77  * @cmd_status: Snapshot of SR taken upon completion of the current
  78  *      command. Only valid when EVENT_CMD_COMPLETE is pending.
  79  * @data_status: Snapshot of SR taken upon completion of the current
  80  *      data transfer. Only valid when EVENT_DATA_COMPLETE or
  81  *      EVENT_DATA_ERROR is pending.
  82  * @stop_cmdr: Value to be loaded into CMDR when the stop command is
  83  *      to be sent.
  84  * @tasklet: Tasklet running the request state machine.
  85  * @pending_events: Bitmask of events flagged by the interrupt handler
  86  *      to be processed by the tasklet.
  87  * @completed_events: Bitmask of events which the state machine has
  88  *      processed.
  89  * @state: Tasklet state.
  90  * @queue: List of slots waiting for access to the controller.
  91  * @need_clock_update: Update the clock rate before the next request.
  92  * @need_reset: Reset controller before next request.
  93  * @mode_reg: Value of the MR register.
  94  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
  95  *      rate and timeout calculations.
  96  * @mapbase: Physical address of the MMIO registers.
  97  * @mck: The peripheral bus clock hooked up to the MMC controller.
  98  * @pdev: Platform device associated with the MMC controller.
  99  * @slot: Slots sharing this MMC controller.
 100  *
 101  * Locking
 102  * =======
 103  *
 104  * @lock is a softirq-safe spinlock protecting @queue as well as
 105  * @cur_slot, @mrq and @state. These must always be updated
 106  * at the same time while holding @lock.
 107  *
 108  * @lock also protects mode_reg and need_clock_update since these are
 109  * used to synchronize mode register updates with the queue
 110  * processing.
 111  *
 112  * The @mrq field of struct atmel_mci_slot is also protected by @lock,
 113  * and must always be written at the same time as the slot is added to
 114  * @queue.
 115  *
 116  * @pending_events and @completed_events are accessed using atomic bit
 117  * operations, so they don't need any locking.
 118  *
 119  * None of the fields touched by the interrupt handler need any
 120  * locking. However, ordering is important: Before EVENT_DATA_ERROR or
 121  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
 122  * interrupts must be disabled and @data_status updated with a
 123  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
 124  * CMDRDY interupt must be disabled and @cmd_status updated with a
 125  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
 126  * bytes_xfered field of @data must be written. This is ensured by
 127  * using barriers.
 128  */
 129 struct atmel_mci {
 130         spinlock_t              lock;
 131         void __iomem            *regs;
 132
 133         struct scatterlist      *sg;
 134         unsigned int            pio_offset;
 135
 136         struct atmel_mci_slot   *cur_slot;
 137         struct mmc_request      *mrq;
 138         struct mmc_command      *cmd;
 139         struct mmc_data         *data;
 140
 141         struct atmel_mci_dma    dma;
 142         struct dma_chan         *data_chan;
 143
 144         u32                     cmd_status;
 145         u32                     data_status;
 146         u32                     stop_cmdr;
 147
 148         struct tasklet_struct   tasklet;
 149         unsigned long           pending_events;
 150         unsigned long           completed_events;
 151         enum atmel_mci_state    state;
 152         struct list_head        queue;
 153
 154         bool                    need_clock_update;
 155         bool                    need_reset;
 156         u32                     mode_reg;
 157         unsigned long           bus_hz;
 158         unsigned long           mapbase;
 159         struct clk              *mck;
 160         struct platform_device  *pdev;
 161
 162         struct atmel_mci_slot   *slot[ATMEL_MCI_MAX_NR_SLOTS];
 163 };
 164
 165 /**
 166  * struct atmel_mci_slot - MMC slot state
 167  * @mmc: The mmc_host representing this slot.
 168  * @host: The MMC controller this slot is using.
 169  * @sdc_reg: Value of SDCR to be written before using this slot.
 170  * @mrq: mmc_request currently being processed or waiting to be
 171  *      processed, or NULL when the slot is idle.
 172  * @queue_node: List node for placing this node in the @queue list of
 173  *      &struct atmel_mci.
 174  * @clock: Clock rate configured by set_ios(). Protected by host->lock.
 175  * @flags: Random state bits associated with the slot.
 176  * @detect_pin: GPIO pin used for card detection, or negative if not
 177  *      available.
 178  * @wp_pin: GPIO pin used for card write protect sending, or negative
 179  *      if not available.
 180  * @detect_timer: Timer used for debouncing @detect_pin interrupts.
 181  */
 182 struct atmel_mci_slot {
 183         struct mmc_host         *mmc;
 184         struct atmel_mci        *host;
 185
 186         u32                     sdc_reg;
 187
 188         struct mmc_request      *mrq;
 189         struct list_head        queue_node;
 190
 191         unsigned int            clock;
 192         unsigned long           flags;
 193 #define ATMCI_CARD_PRESENT      0
 194 #define ATMCI_CARD_NEED_INIT    1
 195 #define ATMCI_SHUTDOWN          2
 196
 197         int                     detect_pin;
 198         int                     wp_pin;
 199
 200         struct timer_list       detect_timer;
 201 };
 202
 203 #define atmci_test_and_clear_pending(host, event)               \
 204         test_and_clear_bit(event, &host->pending_events)
 205 #define atmci_set_completed(host, event)                        \
 206         set_bit(event, &host->completed_events)
 207 #define atmci_set_pending(host, event)                          \
 208         set_bit(event, &host->pending_events)
 209
 210 /*
 211  * The debugfs stuff below is mostly optimized away when
 212  * CONFIG_DEBUG_FS is not set.
 213  */
 214 static int atmci_req_show(struct seq_file *s, void *v)
 215 {
 216         struct atmel_mci_slot   *slot = s->private;
 217         struct mmc_request      *mrq;
 218         struct mmc_command      *cmd;
 219         struct mmc_command      *stop;
 220         struct mmc_data         *data;
 221
 222         /* Make sure we get a consistent snapshot */
 223         spin_lock_bh(&slot->host->lock);
 224         mrq = slot->mrq;
 225
 226         if (mrq) {
 227                 cmd = mrq->cmd;
 228                 data = mrq->data;
 229                 stop = mrq->stop;
 230
 231                 if (cmd)
 232                         seq_printf(s,
 233                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 234                                 cmd->opcode, cmd->arg, cmd->flags,
 235                                 cmd->resp[0], cmd->resp[1], cmd->resp[2],
 236                                 cmd->resp[2], cmd->error);
 237                 if (data)
 238                         seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
 239                                 data->bytes_xfered, data->blocks,
 240                                 data->blksz, data->flags, data->error);
 241                 if (stop)
 242                         seq_printf(s,
 243                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 244                                 stop->opcode, stop->arg, stop->flags,
 245                                 stop->resp[0], stop->resp[1], stop->resp[2],
 246                                 stop->resp[2], stop->error);
 247         }
 248
 249         spin_unlock_bh(&slot->host->lock);
 250
 251         return 0;
 252 }
 253
 254 static int atmci_req_open(struct inode *inode, struct file *file)
 255 {
 256         return single_open(file, atmci_req_show, inode->i_private);
 257 }
 258
 259 static const struct file_operations atmci_req_fops = {
 260         .owner          = THIS_MODULE,
 261         .open           = atmci_req_open,
 262         .read           = seq_read,
 263         .llseek         = seq_lseek,
 264         .release        = single_release,
 265 };
 266
 267 static void atmci_show_status_reg(struct seq_file *s,
 268                 const char *regname, u32 value)
 269 {
 270         static const char       *sr_bit[] = {
 271                 [0]     = "CMDRDY",
 272                 [1]     = "RXRDY",
 273                 [2]     = "TXRDY",
 274                 [3]     = "BLKE",
 275                 [4]     = "DTIP",
 276                 [5]     = "NOTBUSY",
 277                 [8]     = "SDIOIRQA",
 278                 [9]     = "SDIOIRQB",
 279                 [16]    = "RINDE",
 280                 [17]    = "RDIRE",
 281                 [18]    = "RCRCE",
 282                 [19]    = "RENDE",
 283                 [20]    = "RTOE",
 284                 [21]    = "DCRCE",
 285                 [22]    = "DTOE",
 286                 [30]    = "OVRE",
 287                 [31]    = "UNRE",
 288         };
 289         unsigned int            i;
 290
 291         seq_printf(s, "%s:\t0x%08x", regname, value);
 292         for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
 293                 if (value & (1 << i)) {
 294                         if (sr_bit[i])
 295                                 seq_printf(s, " %s", sr_bit[i]);
 296                         else
 297                                 seq_puts(s, " UNKNOWN");
 298                 }
 299         }
 300         seq_putc(s, '\n');
 301 }
 302
 303 static int atmci_regs_show(struct seq_file *s, void *v)
 304 {
 305         struct atmel_mci        *host = s->private;
 306         u32                     *buf;
 307
 308         buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
 309         if (!buf)
 310                 return -ENOMEM;
 311
 312         /*
 313          * Grab a more or less consistent snapshot. Note that we're
 314          * not disabling interrupts, so IMR and SR may not be
 315          * consistent.
 316          */
 317         spin_lock_bh(&host->lock);
 318         clk_enable(host->mck);
 319         memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
 320         clk_disable(host->mck);
 321         spin_unlock_bh(&host->lock);
 322
 323         seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
 324                         buf[MCI_MR / 4],
 325                         buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
 326                         buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
 327                         buf[MCI_MR / 4] & 0xff);
 328         seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
 329         seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
 330         seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
 331         seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
 332                         buf[MCI_BLKR / 4],
 333                         buf[MCI_BLKR / 4] & 0xffff,
 334                         (buf[MCI_BLKR / 4] >> 16) & 0xffff);
 335
 336         /* Don't read RSPR and RDR; it will consume the data there */
 337
 338         atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
 339         atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
 340
 341         kfree(buf);
 342
 343         return 0;
 344 }
 345
 346 static int atmci_regs_open(struct inode *inode, struct file *file)
 347 {
 348         return single_open(file, atmci_regs_show, inode->i_private);
 349 }
 350
 351 static const struct file_operations atmci_regs_fops = {
 352         .owner          = THIS_MODULE,
 353         .open           = atmci_regs_open,
 354         .read           = seq_read,
 355         .llseek         = seq_lseek,
 356         .release        = single_release,
 357 };
 358
 359 static void atmci_init_debugfs(struct atmel_mci_slot *slot)
 360 {
 361         struct mmc_host         *mmc = slot->mmc;
 362         struct atmel_mci        *host = slot->host;
 363         struct dentry           *root;
 364         struct dentry           *node;
 365
 366         root = mmc->debugfs_root;
 367         if (!root)
 368                 return;
 369
 370         node = debugfs_create_file("regs", S_IRUSR, root, host,
 371                         &atmci_regs_fops);
 372         if (IS_ERR(node))
 373                 return;
 374         if (!node)
 375                 goto err;
 376
 377         node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
 378         if (!node)
 379                 goto err;
 380
 381         node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
 382         if (!node)
 383                 goto err;
 384
 385         node = debugfs_create_x32("pending_events", S_IRUSR, root,
 386                                      (u32 *)&host->pending_events);
 387         if (!node)
 388                 goto err;
 389
 390         node = debugfs_create_x32("completed_events", S_IRUSR, root,
 391                                      (u32 *)&host->completed_events);
 392         if (!node)
 393                 goto err;
 394
 395         return;
 396
 397 err:
 398         dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
 399 }
 400
 401 static inline unsigned int ns_to_clocks(struct atmel_mci *host,
 402                                         unsigned int ns)
 403 {
 404         return (ns * (host->bus_hz / 1000000) + 999) / 1000;
 405 }
 406
 407 static void atmci_set_timeout(struct atmel_mci *host,
 408                 struct atmel_mci_slot *slot, struct mmc_data *data)
 409 {
 410         static unsigned dtomul_to_shift[] = {
 411                 0, 4, 7, 8, 10, 12, 16, 20
 412         };
 413         unsigned        timeout;
 414         unsigned        dtocyc;
 415         unsigned        dtomul;
 416
 417         timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
 418
 419         for (dtomul = 0; dtomul < 8; dtomul++) {
 420                 unsigned shift = dtomul_to_shift[dtomul];
 421                 dtocyc = (timeout + (1 << shift) - 1) >> shift;
 422                 if (dtocyc < 15)
 423                         break;
 424         }
 425
 426         if (dtomul >= 8) {
 427                 dtomul = 7;
 428                 dtocyc = 15;
 429         }
 430
 431         dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
 432                         dtocyc << dtomul_to_shift[dtomul]);
 433         mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
 434 }
 435
 436 /*
 437  * Return mask with command flags to be enabled for this command.
 438  */
 439 static u32 atmci_prepare_command(struct mmc_host *mmc,
 440                                  struct mmc_command *cmd)
 441 {
 442         struct mmc_data *data;
 443         u32             cmdr;
 444
 445         cmd->error = -EINPROGRESS;
 446
 447         cmdr = MCI_CMDR_CMDNB(cmd->opcode);
 448
 449         if (cmd->flags & MMC_RSP_PRESENT) {
 450                 if (cmd->flags & MMC_RSP_136)
 451                         cmdr |= MCI_CMDR_RSPTYP_136BIT;
 452                 else
 453                         cmdr |= MCI_CMDR_RSPTYP_48BIT;
 454         }
 455
 456         /*
 457          * This should really be MAXLAT_5 for CMD2 and ACMD41, but
 458          * it's too difficult to determine whether this is an ACMD or
 459          * not. Better make it 64.
 460          */
 461         cmdr |= MCI_CMDR_MAXLAT_64CYC;
 462
 463         if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
 464                 cmdr |= MCI_CMDR_OPDCMD;
 465
 466         data = cmd->data;
 467         if (data) {
 468                 cmdr |= MCI_CMDR_START_XFER;
 469                 if (data->flags & MMC_DATA_STREAM)
 470                         cmdr |= MCI_CMDR_STREAM;
 471                 else if (data->blocks > 1)
 472                         cmdr |= MCI_CMDR_MULTI_BLOCK;
 473                 else
 474                         cmdr |= MCI_CMDR_BLOCK;
 475
 476                 if (data->flags & MMC_DATA_READ)
 477                         cmdr |= MCI_CMDR_TRDIR_READ;
 478         }
 479
 480         return cmdr;
 481 }
 482
 483 static void atmci_start_command(struct atmel_mci *host,
 484                 struct mmc_command *cmd, u32 cmd_flags)
 485 {
 486         WARN_ON(host->cmd);
 487         host->cmd = cmd;
 488
 489         dev_vdbg(&host->pdev->dev,
 490                         "start command: ARGR=0x%08x CMDR=0x%08x\n",
 491                         cmd->arg, cmd_flags);
 492
 493         mci_writel(host, ARGR, cmd->arg);
 494         mci_writel(host, CMDR, cmd_flags);
 495 }
 496
 497 static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
 498 {
 499         atmci_start_command(host, data->stop, host->stop_cmdr);
 500         mci_writel(host, IER, MCI_CMDRDY);
 501 }
 502
 503 #ifdef CONFIG_MMC_ATMELMCI_DMA
 504 static void atmci_dma_cleanup(struct atmel_mci *host)
 505 {
 506         struct mmc_data                 *data = host->data;
 507
 508         dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
 509                      ((data->flags & MMC_DATA_WRITE)
 510                       ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
 511 }
 512
 513 static void atmci_stop_dma(struct atmel_mci *host)
 514 {
 515         struct dma_chan *chan = host->data_chan;
 516
 517         if (chan) {
 518                 chan->device->device_terminate_all(chan);
 519                 atmci_dma_cleanup(host);
 520         } else {
 521                 /* Data transfer was stopped by the interrupt handler */
 522                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
 523                 mci_writel(host, IER, MCI_NOTBUSY);
 524         }
 525 }
 526
 527 /* This function is called by the DMA driver from tasklet context. */
 528 static void atmci_dma_complete(void *arg)
 529 {
 530         struct atmel_mci        *host = arg;
 531         struct mmc_data         *data = host->data;
 532
 533         dev_vdbg(&host->pdev->dev, "DMA complete\n");
 534
 535         atmci_dma_cleanup(host);
 536
 537         /*
 538          * If the card was removed, data will be NULL. No point trying
 539          * to send the stop command or waiting for NBUSY in this case.
 540          */
 541         if (data) {
 542                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
 543                 tasklet_schedule(&host->tasklet);
 544
 545                 /*
 546                  * Regardless of what the documentation says, we have
 547                  * to wait for NOTBUSY even after block read
 548                  * operations.
 549                  *
 550                  * When the DMA transfer is complete, the controller
 551                  * may still be reading the CRC from the card, i.e.
 552                  * the data transfer is still in progress and we
 553                  * haven't seen all the potential error bits yet.
 554                  *
 555                  * The interrupt handler will schedule a different
 556                  * tasklet to finish things up when the data transfer
 557                  * is completely done.
 558                  *
 559                  * We may not complete the mmc request here anyway
 560                  * because the mmc layer may call back and cause us to
 561                  * violate the "don't submit new operations from the
 562                  * completion callback" rule of the dma engine
 563                  * framework.
 564                  */
 565                 mci_writel(host, IER, MCI_NOTBUSY);
 566         }
 567 }
 568
 569 static int
 570 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
 571 {
 572         struct dma_chan                 *chan;
 573         struct dma_async_tx_descriptor  *desc;
 574         struct scatterlist              *sg;
 575         unsigned int                    i;
 576         enum dma_data_direction         direction;
 577
 578         /*
 579          * We don't do DMA on "complex" transfers, i.e. with
 580          * non-word-aligned buffers or lengths. Also, we don't bother
 581          * with all the DMA setup overhead for short transfers.
 582          */
 583         if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
 584                 return -EINVAL;
 585         if (data->blksz & 3)
 586                 return -EINVAL;
 587
 588         for_each_sg(data->sg, sg, data->sg_len, i) {
 589                 if (sg->offset & 3 || sg->length & 3)
 590                         return -EINVAL;
 591         }
 592
 593         /* If we don't have a channel, we can't do DMA */
 594         chan = host->dma.chan;
 595         if (chan)
 596                 host->data_chan = chan;
 597
 598         if (!chan)
 599                 return -ENODEV;
 600
 601         if (data->flags & MMC_DATA_READ)
 602                 direction = DMA_FROM_DEVICE;
 603         else
 604                 direction = DMA_TO_DEVICE;
 605
 606         desc = chan->device->device_prep_slave_sg(chan,
 607                         data->sg, data->sg_len, direction,
 608                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 609         if (!desc)
 610                 return -ENOMEM;
 611
 612         host->dma.data_desc = desc;
 613         desc->callback = atmci_dma_complete;
 614         desc->callback_param = host;
 615         desc->tx_submit(desc);
 616
 617         /* Go! */
 618         chan->device->device_issue_pending(chan);
 619
 620         return 0;
 621 }
 622
 623 #else /* CONFIG_MMC_ATMELMCI_DMA */
 624
 625 static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
 626 {
 627         return -ENOSYS;
 628 }
 629
 630 static void atmci_stop_dma(struct atmel_mci *host)
 631 {
 632         /* Data transfer was stopped by the interrupt handler */
 633         atmci_set_pending(host, EVENT_XFER_COMPLETE);
 634         mci_writel(host, IER, MCI_NOTBUSY);
 635 }
 636
 637 #endif /* CONFIG_MMC_ATMELMCI_DMA */
 638
 639 /*
 640  * Returns a mask of interrupt flags to be enabled after the whole
 641  * request has been prepared.
 642  */
 643 static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
 644 {
 645         u32 iflags;
 646
 647         data->error = -EINPROGRESS;
 648
 649         WARN_ON(host->data);
 650         host->sg = NULL;
 651         host->data = data;
 652
 653         iflags = ATMCI_DATA_ERROR_FLAGS;
 654         if (atmci_submit_data_dma(host, data)) {
 655                 host->data_chan = NULL;
 656
 657                 /*
 658                  * Errata: MMC data write operation with less than 12
 659                  * bytes is impossible.
 660                  *
 661                  * Errata: MCI Transmit Data Register (TDR) FIFO
 662                  * corruption when length is not multiple of 4.
 663                  */
 664                 if (data->blocks * data->blksz < 12
 665                                 || (data->blocks * data->blksz) & 3)
 666                         host->need_reset = true;
 667
 668                 host->sg = data->sg;
 669                 host->pio_offset = 0;
 670                 if (data->flags & MMC_DATA_READ)
 671                         iflags |= MCI_RXRDY;
 672                 else
 673                         iflags |= MCI_TXRDY;
 674         }
 675
 676         return iflags;
 677 }
 678
 679 static void atmci_start_request(struct atmel_mci *host,
 680                 struct atmel_mci_slot *slot)
 681 {
 682         struct mmc_request      *mrq;
 683         struct mmc_command      *cmd;
 684         struct mmc_data         *data;
 685         u32                     iflags;
 686         u32                     cmdflags;
 687
 688         mrq = slot->mrq;
 689         host->cur_slot = slot;
 690         host->mrq = mrq;
 691
 692         host->pending_events = 0;
 693         host->completed_events = 0;
 694         host->data_status = 0;
 695
 696         if (host->need_reset) {
 697                 mci_writel(host, CR, MCI_CR_SWRST);
 698                 mci_writel(host, CR, MCI_CR_MCIEN);
 699                 mci_writel(host, MR, host->mode_reg);
 700                 host->need_reset = false;
 701         }
 702         mci_writel(host, SDCR, slot->sdc_reg);
 703
 704         iflags = mci_readl(host, IMR);
 705         if (iflags)
 706                 dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
 707                                 iflags);
 708
 709         if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
 710                 /* Send init sequence (74 clock cycles) */
 711                 mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
 712                 while (!(mci_readl(host, SR) & MCI_CMDRDY))
 713                         cpu_relax();
 714         }
 715         data = mrq->data;
 716         if (data) {
 717                 atmci_set_timeout(host, slot, data);
 718
 719                 /* Must set block count/size before sending command */
 720                 mci_writel(host, BLKR, MCI_BCNT(data->blocks)
 721                                 | MCI_BLKLEN(data->blksz));
 722                 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
 723                         MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
 724         }
 725
 726         iflags = MCI_CMDRDY;
 727         cmd = mrq->cmd;
 728         cmdflags = atmci_prepare_command(slot->mmc, cmd);
 729         atmci_start_command(host, cmd, cmdflags);
 730
 731         if (data)
 732                 iflags |= atmci_submit_data(host, data);
 733
 734         if (mrq->stop) {
 735                 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
 736                 host->stop_cmdr |= MCI_CMDR_STOP_XFER;
 737                 if (!(data->flags & MMC_DATA_WRITE))
 738                         host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
 739                 if (data->flags & MMC_DATA_STREAM)
 740                         host->stop_cmdr |= MCI_CMDR_STREAM;
 741                 else
 742                         host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
 743         }
 744
 745         /*
 746          * We could have enabled interrupts earlier, but I suspect
 747          * that would open up a nice can of interesting race
 748          * conditions (e.g. command and data complete, but stop not
 749          * prepared yet.)
 750          */
 751         mci_writel(host, IER, iflags);
 752 }
 753
 754 static void atmci_queue_request(struct atmel_mci *host,
 755                 struct atmel_mci_slot *slot, struct mmc_request *mrq)
 756 {
 757         dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
 758                         host->state);
 759
 760         spin_lock_bh(&host->lock);
 761         slot->mrq = mrq;
 762         if (host->state == STATE_IDLE) {
 763                 host->state = STATE_SENDING_CMD;
 764                 atmci_start_request(host, slot);
 765         } else {
 766                 list_add_tail(&slot->queue_node, &host->queue);
 767         }
 768         spin_unlock_bh(&host->lock);
 769 }
 770
 771 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 772 {
 773         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 774         struct atmel_mci        *host = slot->host;
 775         struct mmc_data         *data;
 776
 777         WARN_ON(slot->mrq);
 778
 779         /*
 780          * We may "know" the card is gone even though there's still an
 781          * electrical connection. If so, we really need to communicate
 782          * this to the MMC core since there won't be any more
 783          * interrupts as the card is completely removed. Otherwise,
 784          * the MMC core might believe the card is still there even
 785          * though the card was just removed very slowly.
 786          */
 787         if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
 788                 mrq->cmd->error = -ENOMEDIUM;
 789                 mmc_request_done(mmc, mrq);
 790                 return;
 791         }
 792
 793         /* We don't support multiple blocks of weird lengths. */
 794         data = mrq->data;
 795         if (data && data->blocks > 1 && data->blksz & 3) {
 796                 mrq->cmd->error = -EINVAL;
 797                 mmc_request_done(mmc, mrq);
 798         }
 799
 800         atmci_queue_request(host, slot, mrq);
 801 }
 802
 803 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 804 {
 805         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 806         struct atmel_mci        *host = slot->host;
 807         unsigned int            i;
 808
 809         slot->sdc_reg &= ~MCI_SDCBUS_MASK;
 810         switch (ios->bus_width) {
 811         case MMC_BUS_WIDTH_1:
 812                 slot->sdc_reg |= MCI_SDCBUS_1BIT;
 813                 break;
 814         case MMC_BUS_WIDTH_4:
 815                 slot->sdc_reg = MCI_SDCBUS_4BIT;
 816                 break;
 817         }
 818
 819         if (ios->clock) {
 820                 unsigned int clock_min = ~0U;
 821                 u32 clkdiv;
 822
 823                 spin_lock_bh(&host->lock);
 824                 if (!host->mode_reg) {
 825                         clk_enable(host->mck);
 826                         mci_writel(host, CR, MCI_CR_SWRST);
 827                         mci_writel(host, CR, MCI_CR_MCIEN);
 828                 }
 829
 830                 /*
 831                  * Use mirror of ios->clock to prevent race with mmc
 832                  * core ios update when finding the minimum.
 833                  */
 834                 slot->clock = ios->clock;
 835                 for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
 836                         if (host->slot[i] && host->slot[i]->clock
 837                                         && host->slot[i]->clock < clock_min)
 838                                 clock_min = host->slot[i]->clock;
 839                 }
 840
 841                 /* Calculate clock divider */
 842                 clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
 843                 if (clkdiv > 255) {
 844                         dev_warn(&mmc->class_dev,
 845                                 "clock %u too slow; using %lu\n",
 846                                 clock_min, host->bus_hz / (2 * 256));
 847                         clkdiv = 255;
 848                 }
 849
 850                 /*
 851                  * WRPROOF and RDPROOF prevent overruns/underruns by
 852                  * stopping the clock when the FIFO is full/empty.
 853                  * This state is not expected to last for long.
 854                  */
 855                 host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
 856                                         | MCI_MR_RDPROOF;
 857
 858                 if (list_empty(&host->queue))
 859                         mci_writel(host, MR, host->mode_reg);
 860                 else
 861                         host->need_clock_update = true;
 862
 863                 spin_unlock_bh(&host->lock);
 864         } else {
 865                 bool any_slot_active = false;
 866
 867                 spin_lock_bh(&host->lock);
 868                 slot->clock = 0;
 869                 for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
 870                         if (host->slot[i] && host->slot[i]->clock) {
 871                                 any_slot_active = true;
 872                                 break;
 873                         }
 874                 }
 875                 if (!any_slot_active) {
 876                         mci_writel(host, CR, MCI_CR_MCIDIS);
 877                         if (host->mode_reg) {
 878                                 mci_readl(host, MR);
 879                                 clk_disable(host->mck);
 880                         }
 881                         host->mode_reg = 0;
 882                 }
 883                 spin_unlock_bh(&host->lock);
 884         }
 885
 886         switch (ios->power_mode) {
 887         case MMC_POWER_UP:
 888                 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
 889                 break;
 890         default:
 891                 /*
 892                  * TODO: None of the currently available AVR32-based
 893                  * boards allow MMC power to be turned off. Implement
 894                  * power control when this can be tested properly.
 895                  *
 896                  * We also need to hook this into the clock management
 897                  * somehow so that newly inserted cards aren't
 898                  * subjected to a fast clock before we have a chance
 899                  * to figure out what the maximum rate is. Currently,
 900                  * there's no way to avoid this, and there never will
 901                  * be for boards that don't support power control.
 902                  */
 903                 break;
 904         }
 905 }
 906
 907 static int atmci_get_ro(struct mmc_host *mmc)
 908 {
 909         int                     read_only = -ENOSYS;
 910         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 911
 912         if (gpio_is_valid(slot->wp_pin)) {
 913                 read_only = gpio_get_value(slot->wp_pin);
 914                 dev_dbg(&mmc->class_dev, "card is %s\n",
 915                                 read_only ? "read-only" : "read-write");
 916         }
 917
 918         return read_only;
 919 }
 920
 921 static int atmci_get_cd(struct mmc_host *mmc)
 922 {
 923         int                     present = -ENOSYS;
 924         struct atmel_mci_slot   *slot = mmc_priv(mmc);
 925
 926         if (gpio_is_valid(slot->detect_pin)) {
 927                 present = !gpio_get_value(slot->detect_pin);
 928                 dev_dbg(&mmc->class_dev, "card is %spresent\n",
 929                                 present ? "" : "not ");
 930         }
 931
 932         return present;
 933 }
 934
 935 static const struct mmc_host_ops atmci_ops = {
 936         .request        = atmci_request,
 937         .set_ios        = atmci_set_ios,
 938         .get_ro         = atmci_get_ro,
 939         .get_cd         = atmci_get_cd,
 940 };
 941
 942 /* Called with host->lock held */
 943 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 944         __releases(&host->lock)
 945         __acquires(&host->lock)
 946 {
 947         struct atmel_mci_slot   *slot = NULL;
 948         struct mmc_host         *prev_mmc = host->cur_slot->mmc;
 949
 950         WARN_ON(host->cmd || host->data);
 951
 952         /*
 953          * Update the MMC clock rate if necessary. This may be
 954          * necessary if set_ios() is called when a different slot is
 955          * busy transfering data.
 956          */
 957         if (host->need_clock_update)
 958                 mci_writel(host, MR, host->mode_reg);
 959
 960         host->cur_slot->mrq = NULL;
 961         host->mrq = NULL;
 962         if (!list_empty(&host->queue)) {
 963                 slot = list_entry(host->queue.next,
 964                                 struct atmel_mci_slot, queue_node);
 965                 list_del(&slot->queue_node);
 966                 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
 967                                 mmc_hostname(slot->mmc));
 968                 host->state = STATE_SENDING_CMD;
 969                 atmci_start_request(host, slot);
 970         } else {
 971                 dev_vdbg(&host->pdev->dev, "list empty\n");
 972                 host->state = STATE_IDLE;
 973         }
 974
 975         spin_unlock(&host->lock);
 976         mmc_request_done(prev_mmc, mrq);
 977         spin_lock(&host->lock);
 978 }
 979
 980 static void atmci_command_complete(struct atmel_mci *host,
 981                         struct mmc_command *cmd)
 982 {
 983         u32             status = host->cmd_status;
 984
 985         /* Read the response from the card (up to 16 bytes) */
 986         cmd->resp[0] = mci_readl(host, RSPR);
 987         cmd->resp[1] = mci_readl(host, RSPR);
 988         cmd->resp[2] = mci_readl(host, RSPR);
 989         cmd->resp[3] = mci_readl(host, RSPR);
 990
 991         if (status & MCI_RTOE)
 992                 cmd->error = -ETIMEDOUT;
 993         else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
 994                 cmd->error = -EILSEQ;
 995         else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
 996                 cmd->error = -EIO;
 997         else
 998                 cmd->error = 0;
 999
1000         if (cmd->error) {
1001                 dev_dbg(&host->pdev->dev,
1002                         "command error: status=0x%08x\n", status);
1003
1004                 if (cmd->data) {
1005                         host->data = NULL;
1006                         atmci_stop_dma(host);
1007                         mci_writel(host, IDR, MCI_NOTBUSY
1008                                         | MCI_TXRDY | MCI_RXRDY
1009                                         | ATMCI_DATA_ERROR_FLAGS);
1010                 }
1011         }
1012 }
1013
1014 static void atmci_detect_change(unsigned long data)
1015 {
1016         struct atmel_mci_slot   *slot = (struct atmel_mci_slot *)data;
1017         bool                    present;
1018         bool                    present_old;
1019
1020         /*
1021          * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
1022          * freeing the interrupt. We must not re-enable the interrupt
1023          * if it has been freed, and if we're shutting down, it
1024          * doesn't really matter whether the card is present or not.
1025          */
1026         smp_rmb();
1027         if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
1028                 return;
1029
1030         enable_irq(gpio_to_irq(slot->detect_pin));
1031         present = !gpio_get_value(slot->detect_pin);
1032         present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
1033
1034         dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
1035                         present, present_old);
1036
1037         if (present != present_old) {
1038                 struct atmel_mci        *host = slot->host;
1039                 struct mmc_request      *mrq;
1040
1041                 dev_dbg(&slot->mmc->class_dev, "card %s\n",
1042                         present ? "inserted" : "removed");
1043
1044                 spin_lock(&host->lock);
1045
1046                 if (!present)
1047                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1048                 else
1049                         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1050
1051                 /* Clean up queue if present */
1052                 mrq = slot->mrq;
1053                 if (mrq) {
1054                         if (mrq == host->mrq) {
1055                                 /*
1056                                  * Reset controller to terminate any ongoing
1057                                  * commands or data transfers.
1058                                  */
1059                                 mci_writel(host, CR, MCI_CR_SWRST);
1060                                 mci_writel(host, CR, MCI_CR_MCIEN);
1061                                 mci_writel(host, MR, host->mode_reg);
1062
1063                                 host->data = NULL;
1064                                 host->cmd = NULL;
1065
1066                                 switch (host->state) {
1067                                 case STATE_IDLE:
1068                                         break;
1069                                 case STATE_SENDING_CMD:
1070                                         mrq->cmd->error = -ENOMEDIUM;
1071                                         if (!mrq->data)
1072                                                 break;
1073                                         /* fall through */
1074                                 case STATE_SENDING_DATA:
1075                                         mrq->data->error = -ENOMEDIUM;
1076                                         atmci_stop_dma(host);
1077                                         break;
1078                                 case STATE_DATA_BUSY:
1079                                 case STATE_DATA_ERROR:
1080                                         if (mrq->data->error == -EINPROGRESS)
1081                                                 mrq->data->error = -ENOMEDIUM;
1082                                         if (!mrq->stop)
1083                                                 break;
1084                                         /* fall through */
1085                                 case STATE_SENDING_STOP:
1086                                         mrq->stop->error = -ENOMEDIUM;
1087                                         break;
1088                                 }
1089
1090                                 atmci_request_end(host, mrq);
1091                         } else {
1092                                 list_del(&slot->queue_node);
1093                                 mrq->cmd->error = -ENOMEDIUM;
1094                                 if (mrq->data)
1095                                         mrq->data->error = -ENOMEDIUM;
1096                                 if (mrq->stop)
1097                                         mrq->stop->error = -ENOMEDIUM;
1098
1099                                 spin_unlock(&host->lock);
1100                                 mmc_request_done(slot->mmc, mrq);
1101                                 spin_lock(&host->lock);
1102                         }
1103                 }
1104                 spin_unlock(&host->lock);
1105
1106                 mmc_detect_change(slot->mmc, 0);
1107         }
1108 }
1109
1110 static void atmci_tasklet_func(unsigned long priv)
1111 {
1112         struct atmel_mci        *host = (struct atmel_mci *)priv;
1113         struct mmc_request      *mrq = host->mrq;
1114         struct mmc_data         *data = host->data;
1115         struct mmc_command      *cmd = host->cmd;
1116         enum atmel_mci_state    state = host->state;
1117         enum atmel_mci_state    prev_state;
1118         u32                     status;
1119
1120         spin_lock(&host->lock);
1121
1122         state = host->state;
1123
1124         dev_vdbg(&host->pdev->dev,
1125                 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
1126                 state, host->pending_events, host->completed_events,
1127                 mci_readl(host, IMR));
1128
1129         do {
1130                 prev_state = state;
1131
1132                 switch (state) {
1133                 case STATE_IDLE:
1134                         break;
1135
1136                 case STATE_SENDING_CMD:
1137                         if (!atmci_test_and_clear_pending(host,
1138                                                 EVENT_CMD_COMPLETE))
1139                                 break;
1140
1141                         host->cmd = NULL;
1142                         atmci_set_completed(host, EVENT_CMD_COMPLETE);
1143                         atmci_command_complete(host, mrq->cmd);
1144                         if (!mrq->data || cmd->error) {
1145                                 atmci_request_end(host, host->mrq);
1146                                 goto unlock;
1147                         }
1148
1149                         prev_state = state = STATE_SENDING_DATA;
1150                         /* fall through */
1151
1152                 case STATE_SENDING_DATA:
1153                         if (atmci_test_and_clear_pending(host,
1154                                                 EVENT_DATA_ERROR)) {
1155                                 atmci_stop_dma(host);
1156                                 if (data->stop)
1157                                         send_stop_cmd(host, data);
1158                                 state = STATE_DATA_ERROR;
1159                                 break;
1160                         }
1161
1162                         if (!atmci_test_and_clear_pending(host,
1163                                                 EVENT_XFER_COMPLETE))
1164                                 break;
1165
1166                         atmci_set_completed(host, EVENT_XFER_COMPLETE);
1167                         prev_state = state = STATE_DATA_BUSY;
1168                         /* fall through */
1169
1170                 case STATE_DATA_BUSY:
1171                         if (!atmci_test_and_clear_pending(host,
1172                                                 EVENT_DATA_COMPLETE))
1173                                 break;
1174
1175                         host->data = NULL;
1176                         atmci_set_completed(host, EVENT_DATA_COMPLETE);
1177                         status = host->data_status;
1178                         if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) {
1179                                 if (status & MCI_DTOE) {
1180                                         dev_dbg(&host->pdev->dev,
1181                                                         "data timeout error\n");
1182                                         data->error = -ETIMEDOUT;
1183                                 } else if (status & MCI_DCRCE) {
1184                                         dev_dbg(&host->pdev->dev,
1185                                                         "data CRC error\n");
1186                                         data->error = -EILSEQ;
1187                                 } else {
1188                                         dev_dbg(&host->pdev->dev,
1189                                                 "data FIFO error (status=%08x)\n",
1190                                                 status);
1191                                         data->error = -EIO;
1192                                 }
1193                         } else {
1194                                 data->bytes_xfered = data->blocks * data->blksz;
1195                                 data->error = 0;
1196                         }
1197
1198                         if (!data->stop) {
1199                                 atmci_request_end(host, host->mrq);
1200                                 goto unlock;
1201                         }
1202
1203                         prev_state = state = STATE_SENDING_STOP;
1204                         if (!data->error)
1205                                 send_stop_cmd(host, data);
1206                         /* fall through */
1207
1208                 case STATE_SENDING_STOP:
1209                         if (!atmci_test_and_clear_pending(host,
1210                                                 EVENT_CMD_COMPLETE))
1211                                 break;
1212
1213                         host->cmd = NULL;
1214                         atmci_command_complete(host, mrq->stop);
1215                         atmci_request_end(host, host->mrq);
1216                         goto unlock;
1217
1218                 case STATE_DATA_ERROR:
1219                         if (!atmci_test_and_clear_pending(host,
1220                                                 EVENT_XFER_COMPLETE))
1221                                 break;
1222
1223                         state = STATE_DATA_BUSY;
1224                         break;
1225                 }
1226         } while (state != prev_state);
1227
1228         host->state = state;
1229
1230 unlock:
1231         spin_unlock(&host->lock);
1232 }
1233
1234 static void atmci_read_data_pio(struct atmel_mci *host)
1235 {
1236         struct scatterlist      *sg = host->sg;
1237         void                    *buf = sg_virt(sg);
1238         unsigned int            offset = host->pio_offset;
1239         struct mmc_data         *data = host->data;
1240         u32                     value;
1241         u32                     status;
1242         unsigned int            nbytes = 0;
1243
1244         do {
1245                 value = mci_readl(host, RDR);
1246                 if (likely(offset + 4 <= sg->length)) {
1247                         put_unaligned(value, (u32 *)(buf + offset));
1248
1249                         offset += 4;
1250                         nbytes += 4;
1251
1252                         if (offset == sg->length) {
1253                                 flush_dcache_page(sg_page(sg));
1254                                 host->sg = sg = sg_next(sg);
1255                                 if (!sg)
1256                                         goto done;
1257
1258                                 offset = 0;
1259                                 buf = sg_virt(sg);
1260                         }
1261                 } else {
1262                         unsigned int remaining = sg->length - offset;
1263                         memcpy(buf + offset, &value, remaining);
1264                         nbytes += remaining;
1265
1266                         flush_dcache_page(sg_page(sg));
1267                         host->sg = sg = sg_next(sg);
1268                         if (!sg)
1269                                 goto done;
1270
1271                         offset = 4 - remaining;
1272                         buf = sg_virt(sg);
1273                         memcpy(buf, (u8 *)&value + remaining, offset);
1274                         nbytes += offset;
1275                 }
1276
1277                 status = mci_readl(host, SR);
1278                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1279                         mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
1280                                                 | ATMCI_DATA_ERROR_FLAGS));
1281                         host->data_status = status;
1282                         data->bytes_xfered += nbytes;
1283                         smp_wmb();
1284                         atmci_set_pending(host, EVENT_DATA_ERROR);
1285                         tasklet_schedule(&host->tasklet);
1286                         return;
1287                 }
1288         } while (status & MCI_RXRDY);
1289
1290         host->pio_offset = offset;
1291         data->bytes_xfered += nbytes;
1292
1293         return;
1294
1295 done:
1296         mci_writel(host, IDR, MCI_RXRDY);
1297         mci_writel(host, IER, MCI_NOTBUSY);
1298         data->bytes_xfered += nbytes;
1299         smp_wmb();
1300         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1301 }
1302
1303 static void atmci_write_data_pio(struct atmel_mci *host)
1304 {
1305         struct scatterlist      *sg = host->sg;
1306         void                    *buf = sg_virt(sg);
1307         unsigned int            offset = host->pio_offset;
1308         struct mmc_data         *data = host->data;
1309         u32                     value;
1310         u32                     status;
1311         unsigned int            nbytes = 0;
1312
1313         do {
1314                 if (likely(offset + 4 <= sg->length)) {
1315                         value = get_unaligned((u32 *)(buf + offset));
1316                         mci_writel(host, TDR, value);
1317
1318                         offset += 4;
1319                         nbytes += 4;
1320                         if (offset == sg->length) {
1321                                 host->sg = sg = sg_next(sg);
1322                                 if (!sg)
1323                                         goto done;
1324
1325                                 offset = 0;
1326                                 buf = sg_virt(sg);
1327                         }
1328                 } else {
1329                         unsigned int remaining = sg->length - offset;
1330
1331                         value = 0;
1332                         memcpy(&value, buf + offset, remaining);
1333                         nbytes += remaining;
1334
1335                         host->sg = sg = sg_next(sg);
1336                         if (!sg) {
1337                                 mci_writel(host, TDR, value);
1338                                 goto done;
1339                         }
1340
1341                         offset = 4 - remaining;
1342                         buf = sg_virt(sg);
1343                         memcpy((u8 *)&value + remaining, buf, offset);
1344                         mci_writel(host, TDR, value);
1345                         nbytes += offset;
1346                 }
1347
1348                 status = mci_readl(host, SR);
1349                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1350                         mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
1351                                                 | ATMCI_DATA_ERROR_FLAGS));
1352                         host->data_status = status;
1353                         data->bytes_xfered += nbytes;
1354                         smp_wmb();
1355                         atmci_set_pending(host, EVENT_DATA_ERROR);
1356                         tasklet_schedule(&host->tasklet);
1357                         return;
1358                 }
1359         } while (status & MCI_TXRDY);
1360
1361         host->pio_offset = offset;
1362         data->bytes_xfered += nbytes;
1363
1364         return;
1365
1366 done:
1367         mci_writel(host, IDR, MCI_TXRDY);
1368         mci_writel(host, IER, MCI_NOTBUSY);
1369         data->bytes_xfered += nbytes;
1370         smp_wmb();
1371         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1372 }
1373
1374 static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
1375 {
1376         mci_writel(host, IDR, MCI_CMDRDY);
1377
1378         host->cmd_status = status;
1379         smp_wmb();
1380         atmci_set_pending(host, EVENT_CMD_COMPLETE);
1381         tasklet_schedule(&host->tasklet);
1382 }
1383
1384 static irqreturn_t atmci_interrupt(int irq, void *dev_id)
1385 {
1386         struct atmel_mci        *host = dev_id;
1387         u32                     status, mask, pending;
1388         unsigned int            pass_count = 0;
1389
1390         do {
1391                 status = mci_readl(host, SR);
1392                 mask = mci_readl(host, IMR);
1393                 pending = status & mask;
1394                 if (!pending)
1395                         break;
1396
1397                 if (pending & ATMCI_DATA_ERROR_FLAGS) {
1398                         mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
1399                                         | MCI_RXRDY | MCI_TXRDY);
1400                         pending &= mci_readl(host, IMR);
1401
1402                         host->data_status = status;
1403                         smp_wmb();
1404                         atmci_set_pending(host, EVENT_DATA_ERROR);
1405                         tasklet_schedule(&host->tasklet);
1406                 }
1407                 if (pending & MCI_NOTBUSY) {
1408                         mci_writel(host, IDR,
1409                                         ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY);
1410                         if (!host->data_status)
1411                                 host->data_status = status;
1412                         smp_wmb();
1413                         atmci_set_pending(host, EVENT_DATA_COMPLETE);
1414                         tasklet_schedule(&host->tasklet);
1415                 }
1416                 if (pending & MCI_RXRDY)
1417                         atmci_read_data_pio(host);
1418                 if (pending & MCI_TXRDY)
1419                         atmci_write_data_pio(host);
1420
1421                 if (pending & MCI_CMDRDY)
1422                         atmci_cmd_interrupt(host, status);
1423         } while (pass_count++ < 5);
1424
1425         return pass_count ? IRQ_HANDLED : IRQ_NONE;
1426 }
1427
1428 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
1429 {
1430         struct atmel_mci_slot   *slot = dev_id;
1431
1432         /*
1433          * Disable interrupts until the pin has stabilized and check
1434          * the state then. Use mod_timer() since we may be in the
1435          * middle of the timer routine when this interrupt triggers.
1436          */
1437         disable_irq_nosync(irq);
1438         mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
1439
1440         return IRQ_HANDLED;
1441 }
1442
1443 static int __init atmci_init_slot(struct atmel_mci *host,
1444                 struct mci_slot_pdata *slot_data, unsigned int id,
1445                 u32 sdc_reg)
1446 {
1447         struct mmc_host                 *mmc;
1448         struct atmel_mci_slot           *slot;
1449
1450         mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
1451         if (!mmc)
1452                 return -ENOMEM;
1453
1454         slot = mmc_priv(mmc);
1455         slot->mmc = mmc;
1456         slot->host = host;
1457         slot->detect_pin = slot_data->detect_pin;
1458         slot->wp_pin = slot_data->wp_pin;
1459         slot->sdc_reg = sdc_reg;
1460
1461         mmc->ops = &atmci_ops;
1462         mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
1463         mmc->f_max = host->bus_hz / 2;
1464         mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
1465         if (slot_data->bus_width >= 4)
1466                 mmc->caps |= MMC_CAP_4_BIT_DATA;
1467
1468         mmc->max_hw_segs = 64;
1469         mmc->max_phys_segs = 64;
1470         mmc->max_req_size = 32768 * 512;
1471         mmc->max_blk_size = 32768;
1472         mmc->max_blk_count = 512;
1473
1474         /* Assume card is present initially */
1475         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1476         if (gpio_is_valid(slot->detect_pin)) {
1477                 if (gpio_request(slot->detect_pin, "mmc_detect")) {
1478                         dev_dbg(&mmc->class_dev, "no detect pin available\n");
1479                         slot->detect_pin = -EBUSY;
1480                 } else if (gpio_get_value(slot->detect_pin)) {
1481                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1482                 }
1483         }
1484
1485         if (!gpio_is_valid(slot->detect_pin))
1486                 mmc->caps |= MMC_CAP_NEEDS_POLL;
1487
1488         if (gpio_is_valid(slot->wp_pin)) {
1489                 if (gpio_request(slot->wp_pin, "mmc_wp")) {
1490                         dev_dbg(&mmc->class_dev, "no WP pin available\n");
1491                         slot->wp_pin = -EBUSY;
1492                 }
1493         }
1494
1495         host->slot[id] = slot;
1496         mmc_add_host(mmc);
1497
1498         if (gpio_is_valid(slot->detect_pin)) {
1499                 int ret;
1500
1501                 setup_timer(&slot->detect_timer, atmci_detect_change,
1502                                 (unsigned long)slot);
1503
1504                 ret = request_irq(gpio_to_irq(slot->detect_pin),
1505                                 atmci_detect_interrupt,
1506                                 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
1507                                 "mmc-detect", slot);
1508                 if (ret) {
1509                         dev_dbg(&mmc->class_dev,
1510                                 "could not request IRQ %d for detect pin\n",
1511                                 gpio_to_irq(slot->detect_pin));
1512                         gpio_free(slot->detect_pin);
1513                         slot->detect_pin = -EBUSY;
1514                 }
1515         }
1516
1517         atmci_init_debugfs(slot);
1518
1519         return 0;
1520 }
1521
1522 static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
1523                 unsigned int id)
1524 {
1525         /* Debugfs stuff is cleaned up by mmc core */
1526
1527         set_bit(ATMCI_SHUTDOWN, &slot->flags);
1528         smp_wmb();
1529
1530         mmc_remove_host(slot->mmc);
1531
1532         if (gpio_is_valid(slot->detect_pin)) {
1533                 int pin = slot->detect_pin;
1534
1535                 free_irq(gpio_to_irq(pin), slot);
1536                 del_timer_sync(&slot->detect_timer);
1537                 gpio_free(pin);
1538         }
1539         if (gpio_is_valid(slot->wp_pin))
1540                 gpio_free(slot->wp_pin);
1541
1542         slot->host->slot[id] = NULL;
1543         mmc_free_host(slot->mmc);
1544 }
1545
1546 #ifdef CONFIG_MMC_ATMELMCI_DMA
1547 static bool filter(struct dma_chan *chan, void *slave)
1548 {
1549         struct dw_dma_slave *dws = slave;
1550
1551         if (dws->dma_dev == chan->device->dev) {
1552                 chan->private = dws;
1553                 return true;
1554         } else
1555                 return false;
1556 }
1557 #endif
1558
1559 static int __init atmci_probe(struct platform_device *pdev)
1560 {
1561         struct mci_platform_data        *pdata;
1562         struct atmel_mci                *host;
1563         struct resource                 *regs;
1564         unsigned int                    nr_slots;
1565         int                             irq;
1566         int                             ret;
1567
1568         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1569         if (!regs)
1570                 return -ENXIO;
1571         pdata = pdev->dev.platform_data;
1572         if (!pdata)
1573                 return -ENXIO;
1574         irq = platform_get_irq(pdev, 0);
1575         if (irq < 0)
1576                 return irq;
1577
1578         host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
1579         if (!host)
1580                 return -ENOMEM;
1581
1582         host->pdev = pdev;
1583         spin_lock_init(&host->lock);
1584         INIT_LIST_HEAD(&host->queue);
1585
1586         host->mck = clk_get(&pdev->dev, "mci_clk");
1587         if (IS_ERR(host->mck)) {
1588                 ret = PTR_ERR(host->mck);
1589                 goto err_clk_get;
1590         }
1591
1592         ret = -ENOMEM;
1593         host->regs = ioremap(regs->start, regs->end - regs->start + 1);
1594         if (!host->regs)
1595                 goto err_ioremap;
1596
1597         clk_enable(host->mck);
1598         mci_writel(host, CR, MCI_CR_SWRST);
1599         host->bus_hz = clk_get_rate(host->mck);
1600         clk_disable(host->mck);
1601
1602         host->mapbase = regs->start;
1603
1604         tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
1605
1606         ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
1607         if (ret)
1608                 goto err_request_irq;
1609
1610 #ifdef CONFIG_MMC_ATMELMCI_DMA
1611         if (pdata->dma_slave.dma_dev) {
1612                 struct dw_dma_slave *dws = &pdata->dma_slave;
1613                 dma_cap_mask_t mask;
1614
1615                 dws->tx_reg = regs->start + MCI_TDR;
1616                 dws->rx_reg = regs->start + MCI_RDR;
1617
1618                 /* Try to grab a DMA channel */
1619                 dma_cap_zero(mask);
1620                 dma_cap_set(DMA_SLAVE, mask);
1621                 host->dma.chan = dma_request_channel(mask, filter, dws);
1622         }
1623         if (!host->dma.chan)
1624                 dev_notice(&pdev->dev, "DMA not available, using PIO\n");
1625 #endif /* CONFIG_MMC_ATMELMCI_DMA */
1626
1627         platform_set_drvdata(pdev, host);
1628
1629         /* We need at least one slot to succeed */
1630         nr_slots = 0;
1631         ret = -ENODEV;
1632         if (pdata->slot[0].bus_width) {
1633                 ret = atmci_init_slot(host, &pdata->slot[0],
1634                                 MCI_SDCSEL_SLOT_A, 0);
1635                 if (!ret)
1636                         nr_slots++;
1637         }
1638         if (pdata->slot[1].bus_width) {
1639                 ret = atmci_init_slot(host, &pdata->slot[1],
1640                                 MCI_SDCSEL_SLOT_B, 1);
1641                 if (!ret)
1642                         nr_slots++;
1643         }
1644
1645         if (!nr_slots)
1646                 goto err_init_slot;
1647
1648         dev_info(&pdev->dev,
1649                         "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
1650                         host->mapbase, irq, nr_slots);
1651
1652         return 0;
1653
1654 err_init_slot:
1655 #ifdef CONFIG_MMC_ATMELMCI_DMA
1656         if (host->dma.chan)
1657                 dma_release_channel(host->dma.chan);
1658 #endif
1659         free_irq(irq, host);
1660 err_request_irq:
1661         iounmap(host->regs);
1662 err_ioremap:
1663         clk_put(host->mck);
1664 err_clk_get:
1665         kfree(host);
1666         return ret;
1667 }
1668
1669 static int __exit atmci_remove(struct platform_device *pdev)
1670 {
1671         struct atmel_mci        *host = platform_get_drvdata(pdev);
1672         unsigned int            i;
1673
1674         platform_set_drvdata(pdev, NULL);
1675
1676         for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
1677                 if (host->slot[i])
1678                         atmci_cleanup_slot(host->slot[i], i);
1679         }
1680
1681         clk_enable(host->mck);
1682         mci_writel(host, IDR, ~0UL);
1683         mci_writel(host, CR, MCI_CR_MCIDIS);
1684         mci_readl(host, SR);
1685         clk_disable(host->mck);
1686
1687 #ifdef CONFIG_MMC_ATMELMCI_DMA
1688         if (host->dma.chan)
1689                 dma_release_channel(host->dma.chan);
1690 #endif
1691
1692         free_irq(platform_get_irq(pdev, 0), host);
1693         iounmap(host->regs);
1694
1695         clk_put(host->mck);
1696         kfree(host);
1697
1698         return 0;
1699 }
1700
1701 static struct platform_driver atmci_driver = {
1702         .remove         = __exit_p(atmci_remove),
1703         .driver         = {
1704                 .name           = "atmel_mci",
1705         },
1706 };
1707
1708 static int __init atmci_init(void)
1709 {
1710         return platform_driver_probe(&atmci_driver, atmci_probe);
1711 }
1712
1713 static void __exit atmci_exit(void)
1714 {
1715         platform_driver_unregister(&atmci_driver);
1716 }
1717
1718 late_initcall(atmci_init); /* try to load after dma driver when built-in */
1719 module_exit(atmci_exit);
1720
1721 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
1722 MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
1723 MODULE_LICENSE("GPL v2");