drivers/mfd/stmpe.c

   1 /*
   2  * ST Microelectronics MFD: stmpe's driver
   3  *
   4  * Copyright (C) ST-Ericsson SA 2010
   5  *
   6  * License Terms: GNU General Public License, version 2
   7  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
   8  */
   9
  10 #include <linux/err.h>
  11 #include <linux/gpio.h>
  12 #include <linux/export.h>
  13 #include <linux/kernel.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/irq.h>
  16 #include <linux/irqdomain.h>
  17 #include <linux/of.h>
  18 #include <linux/of_gpio.h>
  19 #include <linux/pm.h>
  20 #include <linux/slab.h>
  21 #include <linux/mfd/core.h>
  22 #include <linux/delay.h>
  23 #include <linux/regulator/consumer.h>
  24 #include "stmpe.h"
  25
  26 /**
  27  * struct stmpe_platform_data - STMPE platform data
  28  * @id: device id to distinguish between multiple STMPEs on the same board
  29  * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
  30  * @irq_trigger: IRQ trigger to use for the interrupt to the host
  31  * @autosleep: bool to enable/disable stmpe autosleep
  32  * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
  33  * @irq_over_gpio: true if gpio is used to get irq
  34  * @irq_gpio: gpio number over which irq will be requested (significant only if
  35  *            irq_over_gpio is true)
  36  */
  37 struct stmpe_platform_data {
  38         int id;
  39         unsigned int blocks;
  40         unsigned int irq_trigger;
  41         bool autosleep;
  42         bool irq_over_gpio;
  43         int irq_gpio;
  44         int autosleep_timeout;
  45 };
  46
  47 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
  48 {
  49         return stmpe->variant->enable(stmpe, blocks, true);
  50 }
  51
  52 static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
  53 {
  54         return stmpe->variant->enable(stmpe, blocks, false);
  55 }
  56
  57 static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
  58 {
  59         int ret;
  60
  61         ret = stmpe->ci->read_byte(stmpe, reg);
  62         if (ret < 0)
  63                 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
  64
  65         dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
  66
  67         return ret;
  68 }
  69
  70 static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
  71 {
  72         int ret;
  73
  74         dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
  75
  76         ret = stmpe->ci->write_byte(stmpe, reg, val);
  77         if (ret < 0)
  78                 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
  79
  80         return ret;
  81 }
  82
  83 static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
  84 {
  85         int ret;
  86
  87         ret = __stmpe_reg_read(stmpe, reg);
  88         if (ret < 0)
  89                 return ret;
  90
  91         ret &= ~mask;
  92         ret |= val;
  93
  94         return __stmpe_reg_write(stmpe, reg, ret);
  95 }
  96
  97 static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
  98                               u8 *values)
  99 {
 100         int ret;
 101
 102         ret = stmpe->ci->read_block(stmpe, reg, length, values);
 103         if (ret < 0)
 104                 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
 105
 106         dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
 107         stmpe_dump_bytes("stmpe rd: ", values, length);
 108
 109         return ret;
 110 }
 111
 112 static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
 113                         const u8 *values)
 114 {
 115         int ret;
 116
 117         dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
 118         stmpe_dump_bytes("stmpe wr: ", values, length);
 119
 120         ret = stmpe->ci->write_block(stmpe, reg, length, values);
 121         if (ret < 0)
 122                 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
 123
 124         return ret;
 125 }
 126
 127 /**
 128  * stmpe_enable - enable blocks on an STMPE device
 129  * @stmpe:      Device to work on
 130  * @blocks:     Mask of blocks (enum stmpe_block values) to enable
 131  */
 132 int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
 133 {
 134         int ret;
 135
 136         mutex_lock(&stmpe->lock);
 137         ret = __stmpe_enable(stmpe, blocks);
 138         mutex_unlock(&stmpe->lock);
 139
 140         return ret;
 141 }
 142 EXPORT_SYMBOL_GPL(stmpe_enable);
 143
 144 /**
 145  * stmpe_disable - disable blocks on an STMPE device
 146  * @stmpe:      Device to work on
 147  * @blocks:     Mask of blocks (enum stmpe_block values) to enable
 148  */
 149 int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
 150 {
 151         int ret;
 152
 153         mutex_lock(&stmpe->lock);
 154         ret = __stmpe_disable(stmpe, blocks);
 155         mutex_unlock(&stmpe->lock);
 156
 157         return ret;
 158 }
 159 EXPORT_SYMBOL_GPL(stmpe_disable);
 160
 161 /**
 162  * stmpe_reg_read() - read a single STMPE register
 163  * @stmpe:      Device to read from
 164  * @reg:        Register to read
 165  */
 166 int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
 167 {
 168         int ret;
 169
 170         mutex_lock(&stmpe->lock);
 171         ret = __stmpe_reg_read(stmpe, reg);
 172         mutex_unlock(&stmpe->lock);
 173
 174         return ret;
 175 }
 176 EXPORT_SYMBOL_GPL(stmpe_reg_read);
 177
 178 /**
 179  * stmpe_reg_write() - write a single STMPE register
 180  * @stmpe:      Device to write to
 181  * @reg:        Register to write
 182  * @val:        Value to write
 183  */
 184 int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
 185 {
 186         int ret;
 187
 188         mutex_lock(&stmpe->lock);
 189         ret = __stmpe_reg_write(stmpe, reg, val);
 190         mutex_unlock(&stmpe->lock);
 191
 192         return ret;
 193 }
 194 EXPORT_SYMBOL_GPL(stmpe_reg_write);
 195
 196 /**
 197  * stmpe_set_bits() - set the value of a bitfield in a STMPE register
 198  * @stmpe:      Device to write to
 199  * @reg:        Register to write
 200  * @mask:       Mask of bits to set
 201  * @val:        Value to set
 202  */
 203 int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
 204 {
 205         int ret;
 206
 207         mutex_lock(&stmpe->lock);
 208         ret = __stmpe_set_bits(stmpe, reg, mask, val);
 209         mutex_unlock(&stmpe->lock);
 210
 211         return ret;
 212 }
 213 EXPORT_SYMBOL_GPL(stmpe_set_bits);
 214
 215 /**
 216  * stmpe_block_read() - read multiple STMPE registers
 217  * @stmpe:      Device to read from
 218  * @reg:        First register
 219  * @length:     Number of registers
 220  * @values:     Buffer to write to
 221  */
 222 int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
 223 {
 224         int ret;
 225
 226         mutex_lock(&stmpe->lock);
 227         ret = __stmpe_block_read(stmpe, reg, length, values);
 228         mutex_unlock(&stmpe->lock);
 229
 230         return ret;
 231 }
 232 EXPORT_SYMBOL_GPL(stmpe_block_read);
 233
 234 /**
 235  * stmpe_block_write() - write multiple STMPE registers
 236  * @stmpe:      Device to write to
 237  * @reg:        First register
 238  * @length:     Number of registers
 239  * @values:     Values to write
 240  */
 241 int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
 242                       const u8 *values)
 243 {
 244         int ret;
 245
 246         mutex_lock(&stmpe->lock);
 247         ret = __stmpe_block_write(stmpe, reg, length, values);
 248         mutex_unlock(&stmpe->lock);
 249
 250         return ret;
 251 }
 252 EXPORT_SYMBOL_GPL(stmpe_block_write);
 253
 254 /**
 255  * stmpe_set_altfunc()- set the alternate function for STMPE pins
 256  * @stmpe:      Device to configure
 257  * @pins:       Bitmask of pins to affect
 258  * @block:      block to enable alternate functions for
 259  *
 260  * @pins is assumed to have a bit set for each of the bits whose alternate
 261  * function is to be changed, numbered according to the GPIOXY numbers.
 262  *
 263  * If the GPIO module is not enabled, this function automatically enables it in
 264  * order to perform the change.
 265  */
 266 int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
 267 {
 268         struct stmpe_variant_info *variant = stmpe->variant;
 269         u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
 270         int af_bits = variant->af_bits;
 271         int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
 272         int mask = (1 << af_bits) - 1;
 273         u8 regs[8];
 274         int af, afperreg, ret;
 275
 276         if (!variant->get_altfunc)
 277                 return 0;
 278
 279         afperreg = 8 / af_bits;
 280         mutex_lock(&stmpe->lock);
 281
 282         ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 283         if (ret < 0)
 284                 goto out;
 285
 286         ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
 287         if (ret < 0)
 288                 goto out;
 289
 290         af = variant->get_altfunc(stmpe, block);
 291
 292         while (pins) {
 293                 int pin = __ffs(pins);
 294                 int regoffset = numregs - (pin / afperreg) - 1;
 295                 int pos = (pin % afperreg) * (8 / afperreg);
 296
 297                 regs[regoffset] &= ~(mask << pos);
 298                 regs[regoffset] |= af << pos;
 299
 300                 pins &= ~(1 << pin);
 301         }
 302
 303         ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
 304
 305 out:
 306         mutex_unlock(&stmpe->lock);
 307         return ret;
 308 }
 309 EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
 310
 311 /*
 312  * GPIO (all variants)
 313  */
 314
 315 static struct resource stmpe_gpio_resources[] = {
 316         /* Start and end filled dynamically */
 317         {
 318                 .flags  = IORESOURCE_IRQ,
 319         },
 320 };
 321
 322 static const struct mfd_cell stmpe_gpio_cell = {
 323         .name           = "stmpe-gpio",
 324         .of_compatible  = "st,stmpe-gpio",
 325         .resources      = stmpe_gpio_resources,
 326         .num_resources  = ARRAY_SIZE(stmpe_gpio_resources),
 327 };
 328
 329 static const struct mfd_cell stmpe_gpio_cell_noirq = {
 330         .name           = "stmpe-gpio",
 331         .of_compatible  = "st,stmpe-gpio",
 332         /* gpio cell resources consist of an irq only so no resources here */
 333 };
 334
 335 /*
 336  * Keypad (1601, 2401, 2403)
 337  */
 338
 339 static struct resource stmpe_keypad_resources[] = {
 340         {
 341                 .name   = "KEYPAD",
 342                 .flags  = IORESOURCE_IRQ,
 343         },
 344         {
 345                 .name   = "KEYPAD_OVER",
 346                 .flags  = IORESOURCE_IRQ,
 347         },
 348 };
 349
 350 static const struct mfd_cell stmpe_keypad_cell = {
 351         .name           = "stmpe-keypad",
 352         .of_compatible  = "st,stmpe-keypad",
 353         .resources      = stmpe_keypad_resources,
 354         .num_resources  = ARRAY_SIZE(stmpe_keypad_resources),
 355 };
 356
 357 /*
 358  * PWM (1601, 2401, 2403)
 359  */
 360 static struct resource stmpe_pwm_resources[] = {
 361         {
 362                 .name   = "PWM0",
 363                 .flags  = IORESOURCE_IRQ,
 364         },
 365         {
 366                 .name   = "PWM1",
 367                 .flags  = IORESOURCE_IRQ,
 368         },
 369         {
 370                 .name   = "PWM2",
 371                 .flags  = IORESOURCE_IRQ,
 372         },
 373 };
 374
 375 static const struct mfd_cell stmpe_pwm_cell = {
 376         .name           = "stmpe-pwm",
 377         .of_compatible  = "st,stmpe-pwm",
 378         .resources      = stmpe_pwm_resources,
 379         .num_resources  = ARRAY_SIZE(stmpe_pwm_resources),
 380 };
 381
 382 /*
 383  * STMPE801
 384  */
 385 static const u8 stmpe801_regs[] = {
 386         [STMPE_IDX_CHIP_ID]     = STMPE801_REG_CHIP_ID,
 387         [STMPE_IDX_ICR_LSB]     = STMPE801_REG_SYS_CTRL,
 388         [STMPE_IDX_GPMR_LSB]    = STMPE801_REG_GPIO_MP_STA,
 389         [STMPE_IDX_GPSR_LSB]    = STMPE801_REG_GPIO_SET_PIN,
 390         [STMPE_IDX_GPCR_LSB]    = STMPE801_REG_GPIO_SET_PIN,
 391         [STMPE_IDX_GPDR_LSB]    = STMPE801_REG_GPIO_DIR,
 392         [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
 393         [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
 394
 395 };
 396
 397 static struct stmpe_variant_block stmpe801_blocks[] = {
 398         {
 399                 .cell   = &stmpe_gpio_cell,
 400                 .irq    = 0,
 401                 .block  = STMPE_BLOCK_GPIO,
 402         },
 403 };
 404
 405 static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
 406         {
 407                 .cell   = &stmpe_gpio_cell_noirq,
 408                 .block  = STMPE_BLOCK_GPIO,
 409         },
 410 };
 411
 412 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
 413                            bool enable)
 414 {
 415         if (blocks & STMPE_BLOCK_GPIO)
 416                 return 0;
 417         else
 418                 return -EINVAL;
 419 }
 420
 421 static struct stmpe_variant_info stmpe801 = {
 422         .name           = "stmpe801",
 423         .id_val         = STMPE801_ID,
 424         .id_mask        = 0xffff,
 425         .num_gpios      = 8,
 426         .regs           = stmpe801_regs,
 427         .blocks         = stmpe801_blocks,
 428         .num_blocks     = ARRAY_SIZE(stmpe801_blocks),
 429         .num_irqs       = STMPE801_NR_INTERNAL_IRQS,
 430         .enable         = stmpe801_enable,
 431 };
 432
 433 static struct stmpe_variant_info stmpe801_noirq = {
 434         .name           = "stmpe801",
 435         .id_val         = STMPE801_ID,
 436         .id_mask        = 0xffff,
 437         .num_gpios      = 8,
 438         .regs           = stmpe801_regs,
 439         .blocks         = stmpe801_blocks_noirq,
 440         .num_blocks     = ARRAY_SIZE(stmpe801_blocks_noirq),
 441         .enable         = stmpe801_enable,
 442 };
 443
 444 /*
 445  * Touchscreen (STMPE811 or STMPE610)
 446  */
 447
 448 static struct resource stmpe_ts_resources[] = {
 449         {
 450                 .name   = "TOUCH_DET",
 451                 .flags  = IORESOURCE_IRQ,
 452         },
 453         {
 454                 .name   = "FIFO_TH",
 455                 .flags  = IORESOURCE_IRQ,
 456         },
 457 };
 458
 459 static const struct mfd_cell stmpe_ts_cell = {
 460         .name           = "stmpe-ts",
 461         .of_compatible  = "st,stmpe-ts",
 462         .resources      = stmpe_ts_resources,
 463         .num_resources  = ARRAY_SIZE(stmpe_ts_resources),
 464 };
 465
 466 /*
 467  * STMPE811 or STMPE610
 468  */
 469
 470 static const u8 stmpe811_regs[] = {
 471         [STMPE_IDX_CHIP_ID]     = STMPE811_REG_CHIP_ID,
 472         [STMPE_IDX_SYS_CTRL]    = STMPE811_REG_SYS_CTRL,
 473         [STMPE_IDX_SYS_CTRL2]   = STMPE811_REG_SYS_CTRL2,
 474         [STMPE_IDX_ICR_LSB]     = STMPE811_REG_INT_CTRL,
 475         [STMPE_IDX_IER_LSB]     = STMPE811_REG_INT_EN,
 476         [STMPE_IDX_ISR_MSB]     = STMPE811_REG_INT_STA,
 477         [STMPE_IDX_GPMR_LSB]    = STMPE811_REG_GPIO_MP_STA,
 478         [STMPE_IDX_GPSR_LSB]    = STMPE811_REG_GPIO_SET_PIN,
 479         [STMPE_IDX_GPCR_LSB]    = STMPE811_REG_GPIO_CLR_PIN,
 480         [STMPE_IDX_GPDR_LSB]    = STMPE811_REG_GPIO_DIR,
 481         [STMPE_IDX_GPRER_LSB]   = STMPE811_REG_GPIO_RE,
 482         [STMPE_IDX_GPFER_LSB]   = STMPE811_REG_GPIO_FE,
 483         [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
 484         [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
 485         [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
 486         [STMPE_IDX_GPEDR_LSB]   = STMPE811_REG_GPIO_ED,
 487 };
 488
 489 static struct stmpe_variant_block stmpe811_blocks[] = {
 490         {
 491                 .cell   = &stmpe_gpio_cell,
 492                 .irq    = STMPE811_IRQ_GPIOC,
 493                 .block  = STMPE_BLOCK_GPIO,
 494         },
 495         {
 496                 .cell   = &stmpe_ts_cell,
 497                 .irq    = STMPE811_IRQ_TOUCH_DET,
 498                 .block  = STMPE_BLOCK_TOUCHSCREEN,
 499         },
 500 };
 501
 502 static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
 503                            bool enable)
 504 {
 505         unsigned int mask = 0;
 506
 507         if (blocks & STMPE_BLOCK_GPIO)
 508                 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
 509
 510         if (blocks & STMPE_BLOCK_ADC)
 511                 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
 512
 513         if (blocks & STMPE_BLOCK_TOUCHSCREEN)
 514                 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
 515
 516         return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
 517                                 enable ? 0 : mask);
 518 }
 519
 520 static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 521 {
 522         /* 0 for touchscreen, 1 for GPIO */
 523         return block != STMPE_BLOCK_TOUCHSCREEN;
 524 }
 525
 526 static struct stmpe_variant_info stmpe811 = {
 527         .name           = "stmpe811",
 528         .id_val         = 0x0811,
 529         .id_mask        = 0xffff,
 530         .num_gpios      = 8,
 531         .af_bits        = 1,
 532         .regs           = stmpe811_regs,
 533         .blocks         = stmpe811_blocks,
 534         .num_blocks     = ARRAY_SIZE(stmpe811_blocks),
 535         .num_irqs       = STMPE811_NR_INTERNAL_IRQS,
 536         .enable         = stmpe811_enable,
 537         .get_altfunc    = stmpe811_get_altfunc,
 538 };
 539
 540 /* Similar to 811, except number of gpios */
 541 static struct stmpe_variant_info stmpe610 = {
 542         .name           = "stmpe610",
 543         .id_val         = 0x0811,
 544         .id_mask        = 0xffff,
 545         .num_gpios      = 6,
 546         .af_bits        = 1,
 547         .regs           = stmpe811_regs,
 548         .blocks         = stmpe811_blocks,
 549         .num_blocks     = ARRAY_SIZE(stmpe811_blocks),
 550         .num_irqs       = STMPE811_NR_INTERNAL_IRQS,
 551         .enable         = stmpe811_enable,
 552         .get_altfunc    = stmpe811_get_altfunc,
 553 };
 554
 555 /*
 556  * STMPE1600
 557  * Compared to all others STMPE variant, LSB and MSB regs are located in this
 558  * order :      LSB   addr
 559  *              MSB   addr + 1
 560  * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
 561  */
 562
 563 static const u8 stmpe1600_regs[] = {
 564         [STMPE_IDX_CHIP_ID]     = STMPE1600_REG_CHIP_ID,
 565         [STMPE_IDX_SYS_CTRL]    = STMPE1600_REG_SYS_CTRL,
 566         [STMPE_IDX_ICR_LSB]     = STMPE1600_REG_SYS_CTRL,
 567         [STMPE_IDX_GPMR_LSB]    = STMPE1600_REG_GPMR_LSB,
 568         [STMPE_IDX_GPMR_CSB]    = STMPE1600_REG_GPMR_MSB,
 569         [STMPE_IDX_GPSR_LSB]    = STMPE1600_REG_GPSR_LSB,
 570         [STMPE_IDX_GPSR_CSB]    = STMPE1600_REG_GPSR_MSB,
 571         [STMPE_IDX_GPDR_LSB]    = STMPE1600_REG_GPDR_LSB,
 572         [STMPE_IDX_GPDR_CSB]    = STMPE1600_REG_GPDR_MSB,
 573         [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
 574         [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
 575         [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
 576 };
 577
 578 static struct stmpe_variant_block stmpe1600_blocks[] = {
 579         {
 580                 .cell   = &stmpe_gpio_cell,
 581                 .irq    = 0,
 582                 .block  = STMPE_BLOCK_GPIO,
 583         },
 584 };
 585
 586 static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
 587                            bool enable)
 588 {
 589         if (blocks & STMPE_BLOCK_GPIO)
 590                 return 0;
 591         else
 592                 return -EINVAL;
 593 }
 594
 595 static struct stmpe_variant_info stmpe1600 = {
 596         .name           = "stmpe1600",
 597         .id_val         = STMPE1600_ID,
 598         .id_mask        = 0xffff,
 599         .num_gpios      = 16,
 600         .af_bits        = 0,
 601         .regs           = stmpe1600_regs,
 602         .blocks         = stmpe1600_blocks,
 603         .num_blocks     = ARRAY_SIZE(stmpe1600_blocks),
 604         .num_irqs       = STMPE1600_NR_INTERNAL_IRQS,
 605         .enable         = stmpe1600_enable,
 606 };
 607
 608 /*
 609  * STMPE1601
 610  */
 611
 612 static const u8 stmpe1601_regs[] = {
 613         [STMPE_IDX_CHIP_ID]     = STMPE1601_REG_CHIP_ID,
 614         [STMPE_IDX_SYS_CTRL]    = STMPE1601_REG_SYS_CTRL,
 615         [STMPE_IDX_SYS_CTRL2]   = STMPE1601_REG_SYS_CTRL2,
 616         [STMPE_IDX_ICR_LSB]     = STMPE1601_REG_ICR_LSB,
 617         [STMPE_IDX_IER_MSB]     = STMPE1601_REG_IER_MSB,
 618         [STMPE_IDX_IER_LSB]     = STMPE1601_REG_IER_LSB,
 619         [STMPE_IDX_ISR_MSB]     = STMPE1601_REG_ISR_MSB,
 620         [STMPE_IDX_GPMR_LSB]    = STMPE1601_REG_GPIO_MP_LSB,
 621         [STMPE_IDX_GPMR_CSB]    = STMPE1601_REG_GPIO_MP_MSB,
 622         [STMPE_IDX_GPSR_LSB]    = STMPE1601_REG_GPIO_SET_LSB,
 623         [STMPE_IDX_GPSR_CSB]    = STMPE1601_REG_GPIO_SET_MSB,
 624         [STMPE_IDX_GPCR_LSB]    = STMPE1601_REG_GPIO_CLR_LSB,
 625         [STMPE_IDX_GPCR_CSB]    = STMPE1601_REG_GPIO_CLR_MSB,
 626         [STMPE_IDX_GPDR_LSB]    = STMPE1601_REG_GPIO_SET_DIR_LSB,
 627         [STMPE_IDX_GPDR_CSB]    = STMPE1601_REG_GPIO_SET_DIR_MSB,
 628         [STMPE_IDX_GPEDR_LSB]   = STMPE1601_REG_GPIO_ED_LSB,
 629         [STMPE_IDX_GPEDR_CSB]   = STMPE1601_REG_GPIO_ED_MSB,
 630         [STMPE_IDX_GPRER_LSB]   = STMPE1601_REG_GPIO_RE_LSB,
 631         [STMPE_IDX_GPRER_CSB]   = STMPE1601_REG_GPIO_RE_MSB,
 632         [STMPE_IDX_GPFER_LSB]   = STMPE1601_REG_GPIO_FE_LSB,
 633         [STMPE_IDX_GPFER_CSB]   = STMPE1601_REG_GPIO_FE_MSB,
 634         [STMPE_IDX_GPPUR_LSB]   = STMPE1601_REG_GPIO_PU_LSB,
 635         [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
 636         [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 637         [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB,
 638         [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
 639 };
 640
 641 static struct stmpe_variant_block stmpe1601_blocks[] = {
 642         {
 643                 .cell   = &stmpe_gpio_cell,
 644                 .irq    = STMPE1601_IRQ_GPIOC,
 645                 .block  = STMPE_BLOCK_GPIO,
 646         },
 647         {
 648                 .cell   = &stmpe_keypad_cell,
 649                 .irq    = STMPE1601_IRQ_KEYPAD,
 650                 .block  = STMPE_BLOCK_KEYPAD,
 651         },
 652         {
 653                 .cell   = &stmpe_pwm_cell,
 654                 .irq    = STMPE1601_IRQ_PWM0,
 655                 .block  = STMPE_BLOCK_PWM,
 656         },
 657 };
 658
 659 /* supported autosleep timeout delay (in msecs) */
 660 static const int stmpe_autosleep_delay[] = {
 661         4, 16, 32, 64, 128, 256, 512, 1024,
 662 };
 663
 664 static int stmpe_round_timeout(int timeout)
 665 {
 666         int i;
 667
 668         for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
 669                 if (stmpe_autosleep_delay[i] >= timeout)
 670                         return i;
 671         }
 672
 673         /*
 674          * requests for delays longer than supported should not return the
 675          * longest supported delay
 676          */
 677         return -EINVAL;
 678 }
 679
 680 static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
 681 {
 682         int ret;
 683
 684         if (!stmpe->variant->enable_autosleep)
 685                 return -ENOSYS;
 686
 687         mutex_lock(&stmpe->lock);
 688         ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
 689         mutex_unlock(&stmpe->lock);
 690
 691         return ret;
 692 }
 693
 694 /*
 695  * Both stmpe 1601/2403 support same layout for autosleep
 696  */
 697 static int stmpe1601_autosleep(struct stmpe *stmpe,
 698                 int autosleep_timeout)
 699 {
 700         int ret, timeout;
 701
 702         /* choose the best available timeout */
 703         timeout = stmpe_round_timeout(autosleep_timeout);
 704         if (timeout < 0) {
 705                 dev_err(stmpe->dev, "invalid timeout\n");
 706                 return timeout;
 707         }
 708
 709         ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
 710                         STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
 711                         timeout);
 712         if (ret < 0)
 713                 return ret;
 714
 715         return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
 716                         STPME1601_AUTOSLEEP_ENABLE,
 717                         STPME1601_AUTOSLEEP_ENABLE);
 718 }
 719
 720 static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
 721                             bool enable)
 722 {
 723         unsigned int mask = 0;
 724
 725         if (blocks & STMPE_BLOCK_GPIO)
 726                 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
 727         else
 728                 mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
 729
 730         if (blocks & STMPE_BLOCK_KEYPAD)
 731                 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
 732         else
 733                 mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
 734
 735         if (blocks & STMPE_BLOCK_PWM)
 736                 mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
 737         else
 738                 mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
 739
 740         return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
 741                                 enable ? mask : 0);
 742 }
 743
 744 static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 745 {
 746         switch (block) {
 747         case STMPE_BLOCK_PWM:
 748                 return 2;
 749
 750         case STMPE_BLOCK_KEYPAD:
 751                 return 1;
 752
 753         case STMPE_BLOCK_GPIO:
 754         default:
 755                 return 0;
 756         }
 757 }
 758
 759 static struct stmpe_variant_info stmpe1601 = {
 760         .name           = "stmpe1601",
 761         .id_val         = 0x0210,
 762         .id_mask        = 0xfff0,       /* at least 0x0210 and 0x0212 */
 763         .num_gpios      = 16,
 764         .af_bits        = 2,
 765         .regs           = stmpe1601_regs,
 766         .blocks         = stmpe1601_blocks,
 767         .num_blocks     = ARRAY_SIZE(stmpe1601_blocks),
 768         .num_irqs       = STMPE1601_NR_INTERNAL_IRQS,
 769         .enable         = stmpe1601_enable,
 770         .get_altfunc    = stmpe1601_get_altfunc,
 771         .enable_autosleep       = stmpe1601_autosleep,
 772 };
 773
 774 /*
 775  * STMPE1801
 776  */
 777 static const u8 stmpe1801_regs[] = {
 778         [STMPE_IDX_CHIP_ID]     = STMPE1801_REG_CHIP_ID,
 779         [STMPE_IDX_SYS_CTRL]    = STMPE1801_REG_SYS_CTRL,
 780         [STMPE_IDX_ICR_LSB]     = STMPE1801_REG_INT_CTRL_LOW,
 781         [STMPE_IDX_IER_LSB]     = STMPE1801_REG_INT_EN_MASK_LOW,
 782         [STMPE_IDX_ISR_LSB]     = STMPE1801_REG_INT_STA_LOW,
 783         [STMPE_IDX_GPMR_LSB]    = STMPE1801_REG_GPIO_MP_LOW,
 784         [STMPE_IDX_GPMR_CSB]    = STMPE1801_REG_GPIO_MP_MID,
 785         [STMPE_IDX_GPMR_MSB]    = STMPE1801_REG_GPIO_MP_HIGH,
 786         [STMPE_IDX_GPSR_LSB]    = STMPE1801_REG_GPIO_SET_LOW,
 787         [STMPE_IDX_GPSR_CSB]    = STMPE1801_REG_GPIO_SET_MID,
 788         [STMPE_IDX_GPSR_MSB]    = STMPE1801_REG_GPIO_SET_HIGH,
 789         [STMPE_IDX_GPCR_LSB]    = STMPE1801_REG_GPIO_CLR_LOW,
 790         [STMPE_IDX_GPCR_CSB]    = STMPE1801_REG_GPIO_CLR_MID,
 791         [STMPE_IDX_GPCR_MSB]    = STMPE1801_REG_GPIO_CLR_HIGH,
 792         [STMPE_IDX_GPDR_LSB]    = STMPE1801_REG_GPIO_SET_DIR_LOW,
 793         [STMPE_IDX_GPDR_CSB]    = STMPE1801_REG_GPIO_SET_DIR_MID,
 794         [STMPE_IDX_GPDR_MSB]    = STMPE1801_REG_GPIO_SET_DIR_HIGH,
 795         [STMPE_IDX_GPRER_LSB]   = STMPE1801_REG_GPIO_RE_LOW,
 796         [STMPE_IDX_GPRER_CSB]   = STMPE1801_REG_GPIO_RE_MID,
 797         [STMPE_IDX_GPRER_MSB]   = STMPE1801_REG_GPIO_RE_HIGH,
 798         [STMPE_IDX_GPFER_LSB]   = STMPE1801_REG_GPIO_FE_LOW,
 799         [STMPE_IDX_GPFER_CSB]   = STMPE1801_REG_GPIO_FE_MID,
 800         [STMPE_IDX_GPFER_MSB]   = STMPE1801_REG_GPIO_FE_HIGH,
 801         [STMPE_IDX_GPPUR_LSB]   = STMPE1801_REG_GPIO_PULL_UP_LOW,
 802         [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 803         [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID,
 804         [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH,
 805         [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH,
 806 };
 807
 808 static struct stmpe_variant_block stmpe1801_blocks[] = {
 809         {
 810                 .cell   = &stmpe_gpio_cell,
 811                 .irq    = STMPE1801_IRQ_GPIOC,
 812                 .block  = STMPE_BLOCK_GPIO,
 813         },
 814         {
 815                 .cell   = &stmpe_keypad_cell,
 816                 .irq    = STMPE1801_IRQ_KEYPAD,
 817                 .block  = STMPE_BLOCK_KEYPAD,
 818         },
 819 };
 820
 821 static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
 822                             bool enable)
 823 {
 824         unsigned int mask = 0;
 825         if (blocks & STMPE_BLOCK_GPIO)
 826                 mask |= STMPE1801_MSK_INT_EN_GPIO;
 827
 828         if (blocks & STMPE_BLOCK_KEYPAD)
 829                 mask |= STMPE1801_MSK_INT_EN_KPC;
 830
 831         return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
 832                                 enable ? mask : 0);
 833 }
 834
 835 static int stmpe_reset(struct stmpe *stmpe)
 836 {
 837         u16 id_val = stmpe->variant->id_val;
 838         unsigned long timeout;
 839         int ret = 0;
 840         u8 reset_bit;
 841
 842         if (id_val == STMPE811_ID)
 843                 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
 844                 reset_bit = STMPE811_SYS_CTRL_RESET;
 845         else
 846                 /* all other STMPE variant use bit 7 of SYS_CTRL register */
 847                 reset_bit = STMPE_SYS_CTRL_RESET;
 848
 849         ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
 850                                reset_bit, reset_bit);
 851         if (ret < 0)
 852                 return ret;
 853
 854         msleep(10);
 855
 856         timeout = jiffies + msecs_to_jiffies(100);
 857         while (time_before(jiffies, timeout)) {
 858                 ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
 859                 if (ret < 0)
 860                         return ret;
 861                 if (!(ret & reset_bit))
 862                         return 0;
 863                 usleep_range(100, 200);
 864         }
 865         return -EIO;
 866 }
 867
 868 static struct stmpe_variant_info stmpe1801 = {
 869         .name           = "stmpe1801",
 870         .id_val         = STMPE1801_ID,
 871         .id_mask        = 0xfff0,
 872         .num_gpios      = 18,
 873         .af_bits        = 0,
 874         .regs           = stmpe1801_regs,
 875         .blocks         = stmpe1801_blocks,
 876         .num_blocks     = ARRAY_SIZE(stmpe1801_blocks),
 877         .num_irqs       = STMPE1801_NR_INTERNAL_IRQS,
 878         .enable         = stmpe1801_enable,
 879         /* stmpe1801 do not have any gpio alternate function */
 880         .get_altfunc    = NULL,
 881 };
 882
 883 /*
 884  * STMPE24XX
 885  */
 886
 887 static const u8 stmpe24xx_regs[] = {
 888         [STMPE_IDX_CHIP_ID]     = STMPE24XX_REG_CHIP_ID,
 889         [STMPE_IDX_SYS_CTRL]    = STMPE24XX_REG_SYS_CTRL,
 890         [STMPE_IDX_SYS_CTRL2]   = STMPE24XX_REG_SYS_CTRL2,
 891         [STMPE_IDX_ICR_LSB]     = STMPE24XX_REG_ICR_LSB,
 892         [STMPE_IDX_IER_MSB]     = STMPE24XX_REG_IER_MSB,
 893         [STMPE_IDX_IER_LSB]     = STMPE24XX_REG_IER_LSB,
 894         [STMPE_IDX_ISR_MSB]     = STMPE24XX_REG_ISR_MSB,
 895         [STMPE_IDX_GPMR_LSB]    = STMPE24XX_REG_GPMR_LSB,
 896         [STMPE_IDX_GPMR_CSB]    = STMPE24XX_REG_GPMR_CSB,
 897         [STMPE_IDX_GPMR_MSB]    = STMPE24XX_REG_GPMR_MSB,
 898         [STMPE_IDX_GPSR_LSB]    = STMPE24XX_REG_GPSR_LSB,
 899         [STMPE_IDX_GPSR_CSB]    = STMPE24XX_REG_GPSR_CSB,
 900         [STMPE_IDX_GPSR_MSB]    = STMPE24XX_REG_GPSR_MSB,
 901         [STMPE_IDX_GPCR_LSB]    = STMPE24XX_REG_GPCR_LSB,
 902         [STMPE_IDX_GPCR_CSB]    = STMPE24XX_REG_GPCR_CSB,
 903         [STMPE_IDX_GPCR_MSB]    = STMPE24XX_REG_GPCR_MSB,
 904         [STMPE_IDX_GPDR_LSB]    = STMPE24XX_REG_GPDR_LSB,
 905         [STMPE_IDX_GPDR_CSB]    = STMPE24XX_REG_GPDR_CSB,
 906         [STMPE_IDX_GPDR_MSB]    = STMPE24XX_REG_GPDR_MSB,
 907         [STMPE_IDX_GPRER_LSB]   = STMPE24XX_REG_GPRER_LSB,
 908         [STMPE_IDX_GPRER_CSB]   = STMPE24XX_REG_GPRER_CSB,
 909         [STMPE_IDX_GPRER_MSB]   = STMPE24XX_REG_GPRER_MSB,
 910         [STMPE_IDX_GPFER_LSB]   = STMPE24XX_REG_GPFER_LSB,
 911         [STMPE_IDX_GPFER_CSB]   = STMPE24XX_REG_GPFER_CSB,
 912         [STMPE_IDX_GPFER_MSB]   = STMPE24XX_REG_GPFER_MSB,
 913         [STMPE_IDX_GPPUR_LSB]   = STMPE24XX_REG_GPPUR_LSB,
 914         [STMPE_IDX_GPPDR_LSB]   = STMPE24XX_REG_GPPDR_LSB,
 915         [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
 916         [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
 917         [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB,
 918         [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB,
 919         [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
 920         [STMPE_IDX_GPEDR_LSB]   = STMPE24XX_REG_GPEDR_LSB,
 921         [STMPE_IDX_GPEDR_CSB]   = STMPE24XX_REG_GPEDR_CSB,
 922         [STMPE_IDX_GPEDR_MSB]   = STMPE24XX_REG_GPEDR_MSB,
 923 };
 924
 925 static struct stmpe_variant_block stmpe24xx_blocks[] = {
 926         {
 927                 .cell   = &stmpe_gpio_cell,
 928                 .irq    = STMPE24XX_IRQ_GPIOC,
 929                 .block  = STMPE_BLOCK_GPIO,
 930         },
 931         {
 932                 .cell   = &stmpe_keypad_cell,
 933                 .irq    = STMPE24XX_IRQ_KEYPAD,
 934                 .block  = STMPE_BLOCK_KEYPAD,
 935         },
 936         {
 937                 .cell   = &stmpe_pwm_cell,
 938                 .irq    = STMPE24XX_IRQ_PWM0,
 939                 .block  = STMPE_BLOCK_PWM,
 940         },
 941 };
 942
 943 static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
 944                             bool enable)
 945 {
 946         unsigned int mask = 0;
 947
 948         if (blocks & STMPE_BLOCK_GPIO)
 949                 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
 950
 951         if (blocks & STMPE_BLOCK_KEYPAD)
 952                 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
 953
 954         return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
 955                                 enable ? mask : 0);
 956 }
 957
 958 static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 959 {
 960         switch (block) {
 961         case STMPE_BLOCK_ROTATOR:
 962                 return 2;
 963
 964         case STMPE_BLOCK_KEYPAD:
 965         case STMPE_BLOCK_PWM:
 966                 return 1;
 967
 968         case STMPE_BLOCK_GPIO:
 969         default:
 970                 return 0;
 971         }
 972 }
 973
 974 static struct stmpe_variant_info stmpe2401 = {
 975         .name           = "stmpe2401",
 976         .id_val         = 0x0101,
 977         .id_mask        = 0xffff,
 978         .num_gpios      = 24,
 979         .af_bits        = 2,
 980         .regs           = stmpe24xx_regs,
 981         .blocks         = stmpe24xx_blocks,
 982         .num_blocks     = ARRAY_SIZE(stmpe24xx_blocks),
 983         .num_irqs       = STMPE24XX_NR_INTERNAL_IRQS,
 984         .enable         = stmpe24xx_enable,
 985         .get_altfunc    = stmpe24xx_get_altfunc,
 986 };
 987
 988 static struct stmpe_variant_info stmpe2403 = {
 989         .name           = "stmpe2403",
 990         .id_val         = 0x0120,
 991         .id_mask        = 0xffff,
 992         .num_gpios      = 24,
 993         .af_bits        = 2,
 994         .regs           = stmpe24xx_regs,
 995         .blocks         = stmpe24xx_blocks,
 996         .num_blocks     = ARRAY_SIZE(stmpe24xx_blocks),
 997         .num_irqs       = STMPE24XX_NR_INTERNAL_IRQS,
 998         .enable         = stmpe24xx_enable,
 999         .get_altfunc    = stmpe24xx_get_altfunc,
1000         .enable_autosleep       = stmpe1601_autosleep, /* same as stmpe1601 */
1001 };
1002
1003 static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
1004         [STMPE610]      = &stmpe610,
1005         [STMPE801]      = &stmpe801,
1006         [STMPE811]      = &stmpe811,
1007         [STMPE1600]     = &stmpe1600,
1008         [STMPE1601]     = &stmpe1601,
1009         [STMPE1801]     = &stmpe1801,
1010         [STMPE2401]     = &stmpe2401,
1011         [STMPE2403]     = &stmpe2403,
1012 };
1013
1014 /*
1015  * These devices can be connected in a 'no-irq' configuration - the irq pin
1016  * is not used and the device cannot interrupt the CPU. Here we only list
1017  * devices which support this configuration - the driver will fail probing
1018  * for any devices not listed here which are configured in this way.
1019  */
1020 static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
1021         [STMPE801]      = &stmpe801_noirq,
1022 };
1023
1024 static irqreturn_t stmpe_irq(int irq, void *data)
1025 {
1026         struct stmpe *stmpe = data;
1027         struct stmpe_variant_info *variant = stmpe->variant;
1028         int num = DIV_ROUND_UP(variant->num_irqs, 8);
1029         u8 israddr;
1030         u8 isr[3];
1031         int ret;
1032         int i;
1033
1034         if (variant->id_val == STMPE801_ID ||
1035             variant->id_val == STMPE1600_ID) {
1036                 int base = irq_create_mapping(stmpe->domain, 0);
1037
1038                 handle_nested_irq(base);
1039                 return IRQ_HANDLED;
1040         }
1041
1042         if (variant->id_val == STMPE1801_ID)
1043                 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
1044         else
1045                 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
1046
1047         ret = stmpe_block_read(stmpe, israddr, num, isr);
1048         if (ret < 0)
1049                 return IRQ_NONE;
1050
1051         for (i = 0; i < num; i++) {
1052                 int bank = num - i - 1;
1053                 u8 status = isr[i];
1054                 u8 clear;
1055
1056                 status &= stmpe->ier[bank];
1057                 if (!status)
1058                         continue;
1059
1060                 clear = status;
1061                 while (status) {
1062                         int bit = __ffs(status);
1063                         int line = bank * 8 + bit;
1064                         int nestedirq = irq_create_mapping(stmpe->domain, line);
1065
1066                         handle_nested_irq(nestedirq);
1067                         status &= ~(1 << bit);
1068                 }
1069
1070                 stmpe_reg_write(stmpe, israddr + i, clear);
1071         }
1072
1073         return IRQ_HANDLED;
1074 }
1075
1076 static void stmpe_irq_lock(struct irq_data *data)
1077 {
1078         struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1079
1080         mutex_lock(&stmpe->irq_lock);
1081 }
1082
1083 static void stmpe_irq_sync_unlock(struct irq_data *data)
1084 {
1085         struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1086         struct stmpe_variant_info *variant = stmpe->variant;
1087         int num = DIV_ROUND_UP(variant->num_irqs, 8);
1088         int i;
1089
1090         for (i = 0; i < num; i++) {
1091                 u8 new = stmpe->ier[i];
1092                 u8 old = stmpe->oldier[i];
1093
1094                 if (new == old)
1095                         continue;
1096
1097                 stmpe->oldier[i] = new;
1098                 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new);
1099         }
1100
1101         mutex_unlock(&stmpe->irq_lock);
1102 }
1103
1104 static void stmpe_irq_mask(struct irq_data *data)
1105 {
1106         struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1107         int offset = data->hwirq;
1108         int regoffset = offset / 8;
1109         int mask = 1 << (offset % 8);
1110
1111         stmpe->ier[regoffset] &= ~mask;
1112 }
1113
1114 static void stmpe_irq_unmask(struct irq_data *data)
1115 {
1116         struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1117         int offset = data->hwirq;
1118         int regoffset = offset / 8;
1119         int mask = 1 << (offset % 8);
1120
1121         stmpe->ier[regoffset] |= mask;
1122 }
1123
1124 static struct irq_chip stmpe_irq_chip = {
1125         .name                   = "stmpe",
1126         .irq_bus_lock           = stmpe_irq_lock,
1127         .irq_bus_sync_unlock    = stmpe_irq_sync_unlock,
1128         .irq_mask               = stmpe_irq_mask,
1129         .irq_unmask             = stmpe_irq_unmask,
1130 };
1131
1132 static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
1133                                 irq_hw_number_t hwirq)
1134 {
1135         struct stmpe *stmpe = d->host_data;
1136         struct irq_chip *chip = NULL;
1137
1138         if (stmpe->variant->id_val != STMPE801_ID)
1139                 chip = &stmpe_irq_chip;
1140
1141         irq_set_chip_data(virq, stmpe);
1142         irq_set_chip_and_handler(virq, chip, handle_edge_irq);
1143         irq_set_nested_thread(virq, 1);
1144         irq_set_noprobe(virq);
1145
1146         return 0;
1147 }
1148
1149 static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
1150 {
1151                 irq_set_chip_and_handler(virq, NULL, NULL);
1152                 irq_set_chip_data(virq, NULL);
1153 }
1154
1155 static const struct irq_domain_ops stmpe_irq_ops = {
1156         .map    = stmpe_irq_map,
1157         .unmap  = stmpe_irq_unmap,
1158         .xlate  = irq_domain_xlate_twocell,
1159 };
1160
1161 static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
1162 {
1163         int base = 0;
1164         int num_irqs = stmpe->variant->num_irqs;
1165
1166         stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
1167                                               &stmpe_irq_ops, stmpe);
1168         if (!stmpe->domain) {
1169                 dev_err(stmpe->dev, "Failed to create irqdomain\n");
1170                 return -ENOSYS;
1171         }
1172
1173         return 0;
1174 }
1175
1176 static int stmpe_chip_init(struct stmpe *stmpe)
1177 {
1178         unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1179         int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1180         struct stmpe_variant_info *variant = stmpe->variant;
1181         u8 icr = 0;
1182         unsigned int id;
1183         u8 data[2];
1184         int ret;
1185
1186         ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1187                                ARRAY_SIZE(data), data);
1188         if (ret < 0)
1189                 return ret;
1190
1191         id = (data[0] << 8) | data[1];
1192         if ((id & variant->id_mask) != variant->id_val) {
1193                 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1194                 return -EINVAL;
1195         }
1196
1197         dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1198
1199         /* Disable all modules -- subdrivers should enable what they need. */
1200         ret = stmpe_disable(stmpe, ~0);
1201         if (ret)
1202                 return ret;
1203
1204         ret =  stmpe_reset(stmpe);
1205         if (ret < 0)
1206                 return ret;
1207
1208         if (stmpe->irq >= 0) {
1209                 if (id == STMPE801_ID || id == STMPE1600_ID)
1210                         icr = STMPE_SYS_CTRL_INT_EN;
1211                 else
1212                         icr = STMPE_ICR_LSB_GIM;
1213
1214                 /* STMPE801 and STMPE1600 don't support Edge interrupts */
1215                 if (id != STMPE801_ID && id != STMPE1600_ID) {
1216                         if (irq_trigger == IRQF_TRIGGER_FALLING ||
1217                                         irq_trigger == IRQF_TRIGGER_RISING)
1218                                 icr |= STMPE_ICR_LSB_EDGE;
1219                 }
1220
1221                 if (irq_trigger == IRQF_TRIGGER_RISING ||
1222                                 irq_trigger == IRQF_TRIGGER_HIGH) {
1223                         if (id == STMPE801_ID || id == STMPE1600_ID)
1224                                 icr |= STMPE_SYS_CTRL_INT_HI;
1225                         else
1226                                 icr |= STMPE_ICR_LSB_HIGH;
1227                 }
1228         }
1229
1230         if (stmpe->pdata->autosleep) {
1231                 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1232                 if (ret)
1233                         return ret;
1234         }
1235
1236         return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1237 }
1238
1239 static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1240 {
1241         return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1242                                NULL, 0, stmpe->domain);
1243 }
1244
1245 static int stmpe_devices_init(struct stmpe *stmpe)
1246 {
1247         struct stmpe_variant_info *variant = stmpe->variant;
1248         unsigned int platform_blocks = stmpe->pdata->blocks;
1249         int ret = -EINVAL;
1250         int i, j;
1251
1252         for (i = 0; i < variant->num_blocks; i++) {
1253                 struct stmpe_variant_block *block = &variant->blocks[i];
1254
1255                 if (!(platform_blocks & block->block))
1256                         continue;
1257
1258                 for (j = 0; j < block->cell->num_resources; j++) {
1259                         struct resource *res =
1260                                 (struct resource *) &block->cell->resources[j];
1261
1262                         /* Dynamically fill in a variant's IRQ. */
1263                         if (res->flags & IORESOURCE_IRQ)
1264                                 res->start = res->end = block->irq + j;
1265                 }
1266
1267                 platform_blocks &= ~block->block;
1268                 ret = stmpe_add_device(stmpe, block->cell);
1269                 if (ret)
1270                         return ret;
1271         }
1272
1273         if (platform_blocks)
1274                 dev_warn(stmpe->dev,
1275                          "platform wants blocks (%#x) not present on variant",
1276                          platform_blocks);
1277
1278         return ret;
1279 }
1280
1281 static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1282                            struct device_node *np)
1283 {
1284         struct device_node *child;
1285
1286         pdata->id = of_alias_get_id(np, "stmpe-i2c");
1287         if (pdata->id < 0)
1288                 pdata->id = -1;
1289
1290         pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
1291                                 &pdata->irq_trigger);
1292         if (gpio_is_valid(pdata->irq_gpio))
1293                 pdata->irq_over_gpio = 1;
1294         else
1295                 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1296
1297         of_property_read_u32(np, "st,autosleep-timeout",
1298                         &pdata->autosleep_timeout);
1299
1300         pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1301
1302         for_each_child_of_node(np, child) {
1303                 if (!strcmp(child->name, "stmpe_gpio")) {
1304                         pdata->blocks |= STMPE_BLOCK_GPIO;
1305                 } else if (!strcmp(child->name, "stmpe_keypad")) {
1306                         pdata->blocks |= STMPE_BLOCK_KEYPAD;
1307                 } else if (!strcmp(child->name, "stmpe_touchscreen")) {
1308                         pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1309                 } else if (!strcmp(child->name, "stmpe_adc")) {
1310                         pdata->blocks |= STMPE_BLOCK_ADC;
1311                 } else if (!strcmp(child->name, "stmpe_pwm")) {
1312                         pdata->blocks |= STMPE_BLOCK_PWM;
1313                 } else if (!strcmp(child->name, "stmpe_rotator")) {
1314                         pdata->blocks |= STMPE_BLOCK_ROTATOR;
1315                 }
1316         }
1317 }
1318
1319 /* Called from client specific probe routines */
1320 int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
1321 {
1322         struct stmpe_platform_data *pdata;
1323         struct device_node *np = ci->dev->of_node;
1324         struct stmpe *stmpe;
1325         int ret;
1326
1327         pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1328         if (!pdata)
1329                 return -ENOMEM;
1330
1331         stmpe_of_probe(pdata, np);
1332
1333         if (of_find_property(np, "interrupts", NULL) == NULL)
1334                 ci->irq = -1;
1335
1336         stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1337         if (!stmpe)
1338                 return -ENOMEM;
1339
1340         mutex_init(&stmpe->irq_lock);
1341         mutex_init(&stmpe->lock);
1342
1343         stmpe->dev = ci->dev;
1344         stmpe->client = ci->client;
1345         stmpe->pdata = pdata;
1346         stmpe->ci = ci;
1347         stmpe->partnum = partnum;
1348         stmpe->variant = stmpe_variant_info[partnum];
1349         stmpe->regs = stmpe->variant->regs;
1350         stmpe->num_gpios = stmpe->variant->num_gpios;
1351         stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
1352         if (!IS_ERR(stmpe->vcc)) {
1353                 ret = regulator_enable(stmpe->vcc);
1354                 if (ret)
1355                         dev_warn(ci->dev, "failed to enable VCC supply\n");
1356         }
1357         stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
1358         if (!IS_ERR(stmpe->vio)) {
1359                 ret = regulator_enable(stmpe->vio);
1360                 if (ret)
1361                         dev_warn(ci->dev, "failed to enable VIO supply\n");
1362         }
1363         dev_set_drvdata(stmpe->dev, stmpe);
1364
1365         if (ci->init)
1366                 ci->init(stmpe);
1367
1368         if (pdata->irq_over_gpio) {
1369                 ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
1370                                 GPIOF_DIR_IN, "stmpe");
1371                 if (ret) {
1372                         dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
1373                                         ret);
1374                         return ret;
1375                 }
1376
1377                 stmpe->irq = gpio_to_irq(pdata->irq_gpio);
1378         } else {
1379                 stmpe->irq = ci->irq;
1380         }
1381
1382         if (stmpe->irq < 0) {
1383                 /* use alternate variant info for no-irq mode, if supported */
1384                 dev_info(stmpe->dev,
1385                         "%s configured in no-irq mode by platform data\n",
1386                         stmpe->variant->name);
1387                 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1388                         dev_err(stmpe->dev,
1389                                 "%s does not support no-irq mode!\n",
1390                                 stmpe->variant->name);
1391                         return -ENODEV;
1392                 }
1393                 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1394         } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1395                 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1396         }
1397
1398         ret = stmpe_chip_init(stmpe);
1399         if (ret)
1400                 return ret;
1401
1402         if (stmpe->irq >= 0) {
1403                 ret = stmpe_irq_init(stmpe, np);
1404                 if (ret)
1405                         return ret;
1406
1407                 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1408                                 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1409                                 "stmpe", stmpe);
1410                 if (ret) {
1411                         dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1412                                         ret);
1413                         return ret;
1414                 }
1415         }
1416
1417         ret = stmpe_devices_init(stmpe);
1418         if (!ret)
1419                 return 0;
1420
1421         dev_err(stmpe->dev, "failed to add children\n");
1422         mfd_remove_devices(stmpe->dev);
1423
1424         return ret;
1425 }
1426
1427 int stmpe_remove(struct stmpe *stmpe)
1428 {
1429         if (!IS_ERR(stmpe->vio))
1430                 regulator_disable(stmpe->vio);
1431         if (!IS_ERR(stmpe->vcc))
1432                 regulator_disable(stmpe->vcc);
1433
1434         mfd_remove_devices(stmpe->dev);
1435
1436         return 0;
1437 }
1438
1439 #ifdef CONFIG_PM
1440 static int stmpe_suspend(struct device *dev)
1441 {
1442         struct stmpe *stmpe = dev_get_drvdata(dev);
1443
1444         if (stmpe->irq >= 0 && device_may_wakeup(dev))
1445                 enable_irq_wake(stmpe->irq);
1446
1447         return 0;
1448 }
1449
1450 static int stmpe_resume(struct device *dev)
1451 {
1452         struct stmpe *stmpe = dev_get_drvdata(dev);
1453
1454         if (stmpe->irq >= 0 && device_may_wakeup(dev))
1455                 disable_irq_wake(stmpe->irq);
1456
1457         return 0;
1458 }
1459
1460 const struct dev_pm_ops stmpe_dev_pm_ops = {
1461         .suspend        = stmpe_suspend,
1462         .resume         = stmpe_resume,
1463 };
1464 #endif