drivers/media/video/saa7134/saa7134-input.c

   1 /*
   2  *
   3  * handle saa7134 IR remotes via linux kernel input layer.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  18  *
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/moduleparam.h>
  23 #include <linux/init.h>
  24 #include <linux/delay.h>
  25 #include <linux/sched.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/input.h>
  28
  29 #include "saa7134-reg.h"
  30 #include "saa7134.h"
  31
  32 static unsigned int disable_ir = 0;
  33 module_param(disable_ir, int, 0444);
  34 MODULE_PARM_DESC(disable_ir,"disable infrared remote support");
  35
  36 static unsigned int ir_debug = 0;
  37 module_param(ir_debug, int, 0644);
  38 MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
  39
  40 static int pinnacle_remote = 0;
  41 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
  42 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
  43
  44 #define dprintk(fmt, arg...)    if (ir_debug) \
  45         printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
  46 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
  47         printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
  48
  49 /* -------------------- GPIO generic keycode builder -------------------- */
  50
  51 static int build_key(struct saa7134_dev *dev)
  52 {
  53         struct saa7134_ir *ir = dev->remote;
  54         u32 gpio, data;
  55
  56         /* rising SAA7134_GPIO_GPRESCAN reads the status */
  57         saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
  58         saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
  59
  60         gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
  61         if (ir->polling) {
  62                 if (ir->last_gpio == gpio)
  63                         return 0;
  64                 ir->last_gpio = gpio;
  65         }
  66
  67         data = ir_extract_bits(gpio, ir->mask_keycode);
  68         dprintk("build_key gpio=0x%x mask=0x%x data=%d\n",
  69                 gpio, ir->mask_keycode, data);
  70
  71         if (ir->polling) {
  72                 if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
  73                     (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
  74                         ir_input_keydown(ir->dev, &ir->ir, data, data);
  75                 } else {
  76                         ir_input_nokey(ir->dev, &ir->ir);
  77                 }
  78         }
  79         else {  /* IRQ driven mode - handle key press and release in one go */
  80                 if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
  81                     (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
  82                         ir_input_keydown(ir->dev, &ir->ir, data, data);
  83                         ir_input_nokey(ir->dev, &ir->ir);
  84                 }
  85         }
  86
  87         return 0;
  88 }
  89
  90 /* --------------------- Chip specific I2C key builders ----------------- */
  91
  92 static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
  93 {
  94         unsigned char b;
  95
  96         /* poll IR chip */
  97         if (1 != i2c_master_recv(&ir->c,&b,1)) {
  98                 i2cdprintk("read error\n");
  99                 return -EIO;
 100         }
 101
 102         /* no button press */
 103         if (b==0)
 104                 return 0;
 105
 106         /* repeating */
 107         if (b & 0x80)
 108                 return 1;
 109
 110         *ir_key = b;
 111         *ir_raw = b;
 112         return 1;
 113 }
 114
 115 void saa7134_input_irq(struct saa7134_dev *dev)
 116 {
 117         struct saa7134_ir *ir = dev->remote;
 118
 119         if (!ir->polling)
 120                 build_key(dev);
 121 }
 122
 123 static void saa7134_input_timer(unsigned long data)
 124 {
 125         struct saa7134_dev *dev = (struct saa7134_dev*)data;
 126         struct saa7134_ir *ir = dev->remote;
 127         unsigned long timeout;
 128
 129         build_key(dev);
 130         timeout = jiffies + (ir->polling * HZ / 1000);
 131         mod_timer(&ir->timer, timeout);
 132 }
 133
 134 int saa7134_input_init1(struct saa7134_dev *dev)
 135 {
 136         struct saa7134_ir *ir;
 137         struct input_dev *input_dev;
 138         IR_KEYTAB_TYPE *ir_codes = NULL;
 139         u32 mask_keycode = 0;
 140         u32 mask_keydown = 0;
 141         u32 mask_keyup   = 0;
 142         int polling      = 0;
 143         int ir_type      = IR_TYPE_OTHER;
 144
 145         if (dev->has_remote != SAA7134_REMOTE_GPIO)
 146                 return -ENODEV;
 147         if (disable_ir)
 148                 return -ENODEV;
 149
 150         /* detect & configure */
 151         switch (dev->board) {
 152         case SAA7134_BOARD_FLYVIDEO2000:
 153         case SAA7134_BOARD_FLYVIDEO3000:
 154         case SAA7134_BOARD_FLYTVPLATINUM_FM:
 155         case SAA7134_BOARD_FLYTVPLATINUM_MINI2:
 156                 ir_codes     = ir_codes_flyvideo;
 157                 mask_keycode = 0xEC00000;
 158                 mask_keydown = 0x0040000;
 159                 break;
 160         case SAA7134_BOARD_CINERGY400:
 161         case SAA7134_BOARD_CINERGY600:
 162         case SAA7134_BOARD_CINERGY600_MK3:
 163                 ir_codes     = ir_codes_cinergy;
 164                 mask_keycode = 0x00003f;
 165                 mask_keyup   = 0x040000;
 166                 break;
 167         case SAA7134_BOARD_ECS_TVP3XP:
 168         case SAA7134_BOARD_ECS_TVP3XP_4CB5:
 169                 ir_codes     = ir_codes_eztv;
 170                 mask_keycode = 0x00017c;
 171                 mask_keyup   = 0x000002;
 172                 polling      = 50; // ms
 173                 break;
 174         case SAA7134_BOARD_KWORLD_XPERT:
 175         case SAA7134_BOARD_AVACSSMARTTV:
 176                 ir_codes     = ir_codes_pixelview;
 177                 mask_keycode = 0x00001F;
 178                 mask_keyup   = 0x000020;
 179                 polling      = 50; // ms
 180                 break;
 181         case SAA7134_BOARD_MD2819:
 182         case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
 183         case SAA7134_BOARD_AVERMEDIA_305:
 184         case SAA7134_BOARD_AVERMEDIA_307:
 185         case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
 186         case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
 187         case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
 188                 ir_codes     = ir_codes_avermedia;
 189                 mask_keycode = 0x0007C8;
 190                 mask_keydown = 0x000010;
 191                 polling      = 50; // ms
 192                 /* Set GPIO pin2 to high to enable the IR controller */
 193                 saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
 194                 saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
 195                 break;
 196         case SAA7134_BOARD_AVERMEDIA_777:
 197         case SAA7134_BOARD_AVERMEDIA_A16AR:
 198                 ir_codes     = ir_codes_avermedia;
 199                 mask_keycode = 0x02F200;
 200                 mask_keydown = 0x000400;
 201                 polling      = 50; // ms
 202                 /* Without this we won't receive key up events */
 203                 saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
 204                 saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
 205                 break;
 206         case SAA7134_BOARD_KWORLD_TERMINATOR:
 207                 ir_codes     = ir_codes_pixelview;
 208                 mask_keycode = 0x00001f;
 209                 mask_keyup   = 0x000060;
 210                 polling      = 50; // ms
 211                 break;
 212         case SAA7134_BOARD_MANLI_MTV001:
 213         case SAA7134_BOARD_MANLI_MTV002:
 214         case SAA7134_BOARD_BEHOLD_409FM:
 215                 ir_codes     = ir_codes_manli;
 216                 mask_keycode = 0x001f00;
 217                 mask_keyup   = 0x004000;
 218                 polling      = 50; // ms
 219                 break;
 220         case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
 221                 ir_codes     = ir_codes_pctv_sedna;
 222                 mask_keycode = 0x001f00;
 223                 mask_keyup   = 0x004000;
 224                 polling      = 50; // ms
 225                 break;
 226         case SAA7134_BOARD_GOTVIEW_7135:
 227                 ir_codes     = ir_codes_gotview7135;
 228                 mask_keycode = 0x0003EC;
 229                 mask_keyup   = 0x008000;
 230                 mask_keydown = 0x000010;
 231                 polling      = 50; // ms
 232                 break;
 233         case SAA7134_BOARD_VIDEOMATE_TV_PVR:
 234         case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
 235         case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
 236                 ir_codes     = ir_codes_videomate_tv_pvr;
 237                 mask_keycode = 0x00003F;
 238                 mask_keyup   = 0x400000;
 239                 polling      = 50; // ms
 240                 break;
 241         case SAA7134_BOARD_PROTEUS_2309:
 242                 ir_codes     = ir_codes_proteus_2309;
 243                 mask_keycode = 0x00007F;
 244                 mask_keyup   = 0x000080;
 245                 polling      = 50; // ms
 246                 break;
 247         case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 248         case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 249                 ir_codes     = ir_codes_videomate_tv_pvr;
 250                 mask_keycode = 0x003F00;
 251                 mask_keyup   = 0x040000;
 252                 break;
 253         case SAA7134_BOARD_FLYDVBT_LR301:
 254         case SAA7134_BOARD_FLYDVBTDUO:
 255                 ir_codes     = ir_codes_flydvb;
 256                 mask_keycode = 0x0001F00;
 257                 mask_keydown = 0x0040000;
 258                 break;
 259         }
 260         if (NULL == ir_codes) {
 261                 printk("%s: Oops: IR config error [card=%d]\n",
 262                        dev->name, dev->board);
 263                 return -ENODEV;
 264         }
 265
 266         ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 267         input_dev = input_allocate_device();
 268         if (!ir || !input_dev) {
 269                 kfree(ir);
 270                 input_free_device(input_dev);
 271                 return -ENOMEM;
 272         }
 273
 274         ir->dev = input_dev;
 275
 276         /* init hardware-specific stuff */
 277         ir->mask_keycode = mask_keycode;
 278         ir->mask_keydown = mask_keydown;
 279         ir->mask_keyup   = mask_keyup;
 280         ir->polling      = polling;
 281
 282         /* init input device */
 283         snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
 284                  saa7134_boards[dev->board].name);
 285         snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 286                  pci_name(dev->pci));
 287
 288         ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
 289         input_dev->name = ir->name;
 290         input_dev->phys = ir->phys;
 291         input_dev->id.bustype = BUS_PCI;
 292         input_dev->id.version = 1;
 293         if (dev->pci->subsystem_vendor) {
 294                 input_dev->id.vendor  = dev->pci->subsystem_vendor;
 295                 input_dev->id.product = dev->pci->subsystem_device;
 296         } else {
 297                 input_dev->id.vendor  = dev->pci->vendor;
 298                 input_dev->id.product = dev->pci->device;
 299         }
 300         input_dev->cdev.dev = &dev->pci->dev;
 301
 302         /* all done */
 303         dev->remote = ir;
 304         if (ir->polling) {
 305                 init_timer(&ir->timer);
 306                 ir->timer.function = saa7134_input_timer;
 307                 ir->timer.data     = (unsigned long)dev;
 308                 ir->timer.expires  = jiffies + HZ;
 309                 add_timer(&ir->timer);
 310         }
 311
 312         input_register_device(ir->dev);
 313         return 0;
 314 }
 315
 316 void saa7134_input_fini(struct saa7134_dev *dev)
 317 {
 318         if (NULL == dev->remote)
 319                 return;
 320
 321         if (dev->remote->polling)
 322                 del_timer_sync(&dev->remote->timer);
 323         input_unregister_device(dev->remote->dev);
 324         kfree(dev->remote);
 325         dev->remote = NULL;
 326 }
 327
 328 void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
 329 {
 330         if (disable_ir) {
 331                 dprintk("Found supported i2c remote, but IR has been disabled\n");
 332                 ir->get_key=NULL;
 333                 return;
 334         }
 335
 336         switch (dev->board) {
 337         case SAA7134_BOARD_PINNACLE_PCTV_110i:
 338                 snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV");
 339                 if (pinnacle_remote == 0) {
 340                         ir->get_key   = get_key_pinnacle_color;
 341                         ir->ir_codes = ir_codes_pinnacle_color;
 342                 } else {
 343                         ir->get_key   = get_key_pinnacle_grey;
 344                         ir->ir_codes = ir_codes_pinnacle_grey;
 345                 }
 346                 break;
 347         case SAA7134_BOARD_UPMOST_PURPLE_TV:
 348                 snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV");
 349                 ir->get_key   = get_key_purpletv;
 350                 ir->ir_codes  = ir_codes_purpletv;
 351                 break;
 352         default:
 353                 dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
 354                 break;
 355         }
 356
 357 }
 358 /* ----------------------------------------------------------------------
 359  * Local variables:
 360  * c-basic-offset: 8
 361  * End:
 362  */