drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tvaudio.h>
  35 #include <media/i2c-addr.h>
  36 #include <media/tveeprom.h>
  37 #include <media/v4l2-common.h>
  38 #include <media/v4l2-chip-ident.h>
  39
  40 #include "em28xx.h"
  41
  42 #define DRIVER_NAME         "em28xx"
  43
  44 static int tuner = -1;
  45 module_param(tuner, int, 0444);
  46 MODULE_PARM_DESC(tuner, "tuner type");
  47
  48 static unsigned int disable_ir;
  49 module_param(disable_ir, int, 0444);
  50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  51
  52 static unsigned int disable_usb_speed_check;
  53 module_param(disable_usb_speed_check, int, 0444);
  54 MODULE_PARM_DESC(disable_usb_speed_check,
  55                  "override min bandwidth requirement of 480M bps");
  56
  57 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  58 module_param_array(card,  int, NULL, 0444);
  59 MODULE_PARM_DESC(card,     "card type");
  60
  61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
  62 static unsigned long em28xx_devused;
  63
  64 struct em28xx_hash_table {
  65         unsigned long hash;
  66         unsigned int  model;
  67         unsigned int  tuner;
  68 };
  69
  70 /*
  71  *  Reset sequences for analog/digital modes
  72  */
  73
  74 /* Reset for the most [analog] boards */
  75 static struct em28xx_reg_seq default_analog[] = {
  76         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  77         {       -1,             -1,     -1,             -1},
  78 };
  79
  80 /* Reset for the most [digital] boards */
  81 static struct em28xx_reg_seq default_digital[] = {
  82         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  83         {       -1,             -1,     -1,             -1},
  84 };
  85
  86 /* Board Hauppauge WinTV HVR 900 analog */
  87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  88         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  89         {0x05,                  0xff,   0x10,           10},
  90         {  -1,                  -1,     -1,             -1},
  91 };
  92
  93 /* Board Hauppauge WinTV HVR 900 digital */
  94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  95         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
  96         {EM2880_R04_GPO,        0x04,   0x0f,           10},
  97         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
  98         { -1,                   -1,     -1,             -1},
  99 };
 100
 101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 103         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
 104         {       -1,             -1,     -1,              -1},
 105 };
 106
 107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 108
 109 /* Board  - EM2870 Kworld 355u
 110    Analog - No input analog */
 111
 112 /* Board - EM2882 Kworld 315U digital */
 113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
 114         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 115         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 116         {EM2880_R04_GPO,        0x04,   0xff,           10},
 117         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 118         {EM28XX_R08_GPIO,       0x7e,   0xff,           10},
 119         {  -1,                  -1,     -1,             -1},
 120 };
 121
 122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 123         {EM2880_R04_GPO,        0x08,   0xff,           10},
 124         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 125         {EM2880_R04_GPO,        0x08,   0xff,           10},
 126         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 127         {  -1,                  -1,     -1,             -1},
 128 };
 129
 130 static struct em28xx_reg_seq kworld_330u_analog[] = {
 131         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 132         {EM2880_R04_GPO,        0x00,   0xff,           10},
 133         { -1,                   -1,     -1,             -1},
 134 };
 135
 136 static struct em28xx_reg_seq kworld_330u_digital[] = {
 137         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 138         {EM2880_R04_GPO,        0x08,   0xff,           10},
 139         { -1,                   -1,     -1,             -1},
 140 };
 141
 142 /* Evga inDtube
 143    GPIO0 - Enable digital power (s5h1409) - low to enable
 144    GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
 145    GPIO4 - xc3028 reset
 146    GOP3  - s5h1409 reset
 147  */
 148 static struct em28xx_reg_seq evga_indtube_analog[] = {
 149         {EM28XX_R08_GPIO,       0x79,   0xff,           60},
 150         {       -1,             -1,     -1,             -1},
 151 };
 152
 153 static struct em28xx_reg_seq evga_indtube_digital[] = {
 154         {EM28XX_R08_GPIO,       0x7a,   0xff,            1},
 155         {EM2880_R04_GPO,        0x04,   0xff,           10},
 156         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 157         { -1,                   -1,     -1,             -1},
 158 };
 159
 160 /* Pinnacle Hybrid Pro eb1a:2881 */
 161 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 162         {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
 163         {       -1,             -1,     -1,             -1},
 164 };
 165
 166 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 167         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 168         {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
 169         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 170         {       -1,             -1,     -1,             -1},
 171 };
 172
 173 /* eb1a:2868 Reddo DVB-C USB TV Box
 174    GPIO4 - CU1216L NIM
 175    Other GPIOs seems to be don't care. */
 176 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
 177         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 178         {EM28XX_R08_GPIO,       0xde,   0xff,           10},
 179         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 180         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 181         {EM28XX_R08_GPIO,       0x7f,   0xff,           10},
 182         {EM28XX_R08_GPIO,       0x6f,   0xff,           10},
 183         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 184         {-1,                    -1,     -1,             -1},
 185 };
 186
 187 /* Callback for the most boards */
 188 static struct em28xx_reg_seq default_tuner_gpio[] = {
 189         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 190         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 191         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 192         {  -1,                  -1,             -1,             -1},
 193 };
 194
 195 /* Mute/unmute */
 196 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 197         {EM28XX_R08_GPIO,       5,              7,              10},
 198         {  -1,                  -1,             -1,             -1},
 199 };
 200
 201 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 202         {EM28XX_R08_GPIO,       4,              7,              10},
 203         {  -1,                  -1,             -1,             -1},
 204 };
 205
 206 static struct em28xx_reg_seq compro_mute_gpio[] = {
 207         {EM28XX_R08_GPIO,       6,              7,              10},
 208         {  -1,                  -1,             -1,             -1},
 209 };
 210
 211 /* Terratec AV350 */
 212 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
 213         {EM28XX_R08_GPIO,       0xff,   0x7f,           10},
 214         {       -1,             -1,     -1,             -1},
 215 };
 216
 217 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 218         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 219         {       -1,             -1,     -1,             -1},
 220 };
 221
 222 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 223         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 224         {EM28XX_R08_GPIO,       0x01,   0xf7,           10},
 225         {       -1,             -1,     -1,             -1},
 226 };
 227
 228 /*
 229  *  Board definitions
 230  */
 231 struct em28xx_board em28xx_boards[] = {
 232         [EM2750_BOARD_UNKNOWN] = {
 233                 .name          = "EM2710/EM2750/EM2751 webcam grabber",
 234                 .xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
 235                 .tuner_type    = TUNER_ABSENT,
 236                 .is_webcam     = 1,
 237                 .input         = { {
 238                         .type     = EM28XX_VMUX_COMPOSITE1,
 239                         .vmux     = 0,
 240                         .amux     = EM28XX_AMUX_VIDEO,
 241                         .gpio     = silvercrest_reg_seq,
 242                 } },
 243         },
 244         [EM2800_BOARD_UNKNOWN] = {
 245                 .name         = "Unknown EM2800 video grabber",
 246                 .is_em2800    = 1,
 247                 .tda9887_conf = TDA9887_PRESENT,
 248                 .decoder      = EM28XX_SAA711X,
 249                 .tuner_type   = TUNER_ABSENT,
 250                 .input        = { {
 251                         .type     = EM28XX_VMUX_COMPOSITE1,
 252                         .vmux     = SAA7115_COMPOSITE0,
 253                         .amux     = EM28XX_AMUX_LINE_IN,
 254                 }, {
 255                         .type     = EM28XX_VMUX_SVIDEO,
 256                         .vmux     = SAA7115_SVIDEO3,
 257                         .amux     = EM28XX_AMUX_LINE_IN,
 258                 } },
 259         },
 260         [EM2820_BOARD_UNKNOWN] = {
 261                 .name          = "Unknown EM2750/28xx video grabber",
 262                 .tuner_type    = TUNER_ABSENT,
 263                 .is_webcam     = 1,     /* To enable sensor probe */
 264         },
 265         [EM2750_BOARD_DLCW_130] = {
 266                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 267                 .name          = "Huaqi DLCW-130",
 268                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 269                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 270                 .tuner_type    = TUNER_ABSENT,
 271                 .is_webcam     = 1,
 272                 .input         = { {
 273                         .type     = EM28XX_VMUX_COMPOSITE1,
 274                         .vmux     = 0,
 275                         .amux     = EM28XX_AMUX_VIDEO,
 276                 } },
 277         },
 278         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 279                 .name         = "Kworld PVR TV 2800 RF",
 280                 .tuner_type   = TUNER_TEMIC_PAL,
 281                 .tda9887_conf = TDA9887_PRESENT,
 282                 .decoder      = EM28XX_SAA711X,
 283                 .input        = { {
 284                         .type     = EM28XX_VMUX_COMPOSITE1,
 285                         .vmux     = SAA7115_COMPOSITE0,
 286                         .amux     = EM28XX_AMUX_LINE_IN,
 287                 }, {
 288                         .type     = EM28XX_VMUX_SVIDEO,
 289                         .vmux     = SAA7115_SVIDEO3,
 290                         .amux     = EM28XX_AMUX_LINE_IN,
 291                 } },
 292         },
 293         [EM2820_BOARD_GADMEI_TVR200] = {
 294                 .name         = "Gadmei TVR200",
 295                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 296                 .tda9887_conf = TDA9887_PRESENT,
 297                 .decoder      = EM28XX_SAA711X,
 298                 .input        = { {
 299                         .type     = EM28XX_VMUX_TELEVISION,
 300                         .vmux     = SAA7115_COMPOSITE2,
 301                         .amux     = EM28XX_AMUX_LINE_IN,
 302                 }, {
 303                         .type     = EM28XX_VMUX_COMPOSITE1,
 304                         .vmux     = SAA7115_COMPOSITE0,
 305                         .amux     = EM28XX_AMUX_LINE_IN,
 306                 }, {
 307                         .type     = EM28XX_VMUX_SVIDEO,
 308                         .vmux     = SAA7115_SVIDEO3,
 309                         .amux     = EM28XX_AMUX_LINE_IN,
 310                 } },
 311         },
 312         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 313                 .name         = "Terratec Cinergy 250 USB",
 314                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 315                 .has_ir_i2c   = 1,
 316                 .tda9887_conf = TDA9887_PRESENT,
 317                 .decoder      = EM28XX_SAA711X,
 318                 .input        = { {
 319                         .type     = EM28XX_VMUX_TELEVISION,
 320                         .vmux     = SAA7115_COMPOSITE2,
 321                         .amux     = EM28XX_AMUX_LINE_IN,
 322                 }, {
 323                         .type     = EM28XX_VMUX_COMPOSITE1,
 324                         .vmux     = SAA7115_COMPOSITE0,
 325                         .amux     = EM28XX_AMUX_LINE_IN,
 326                 }, {
 327                         .type     = EM28XX_VMUX_SVIDEO,
 328                         .vmux     = SAA7115_SVIDEO3,
 329                         .amux     = EM28XX_AMUX_LINE_IN,
 330                 } },
 331         },
 332         [EM2820_BOARD_PINNACLE_USB_2] = {
 333                 .name         = "Pinnacle PCTV USB 2",
 334                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 335                 .has_ir_i2c   = 1,
 336                 .tda9887_conf = TDA9887_PRESENT,
 337                 .decoder      = EM28XX_SAA711X,
 338                 .input        = { {
 339                         .type     = EM28XX_VMUX_TELEVISION,
 340                         .vmux     = SAA7115_COMPOSITE2,
 341                         .amux     = EM28XX_AMUX_VIDEO,
 342                 }, {
 343                         .type     = EM28XX_VMUX_COMPOSITE1,
 344                         .vmux     = SAA7115_COMPOSITE0,
 345                         .amux     = EM28XX_AMUX_LINE_IN,
 346                 }, {
 347                         .type     = EM28XX_VMUX_SVIDEO,
 348                         .vmux     = SAA7115_SVIDEO3,
 349                         .amux     = EM28XX_AMUX_LINE_IN,
 350                 } },
 351         },
 352         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 353                 .name         = "Hauppauge WinTV USB 2",
 354                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 355                 .tda9887_conf = TDA9887_PRESENT |
 356                                 TDA9887_PORT1_ACTIVE |
 357                                 TDA9887_PORT2_ACTIVE,
 358                 .decoder      = EM28XX_TVP5150,
 359                 .has_msp34xx  = 1,
 360                 .has_ir_i2c   = 1,
 361                 .input        = { {
 362                         .type     = EM28XX_VMUX_TELEVISION,
 363                         .vmux     = TVP5150_COMPOSITE0,
 364                         .amux     = MSP_INPUT_DEFAULT,
 365                 }, {
 366                         .type     = EM28XX_VMUX_SVIDEO,
 367                         .vmux     = TVP5150_SVIDEO,
 368                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 369                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 370                 } },
 371         },
 372         [EM2820_BOARD_DLINK_USB_TV] = {
 373                 .name         = "D-Link DUB-T210 TV Tuner",
 374                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 375                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 376                 .tda9887_conf = TDA9887_PRESENT,
 377                 .decoder      = EM28XX_SAA711X,
 378                 .input        = { {
 379                         .type     = EM28XX_VMUX_TELEVISION,
 380                         .vmux     = SAA7115_COMPOSITE2,
 381                         .amux     = EM28XX_AMUX_LINE_IN,
 382                 }, {
 383                         .type     = EM28XX_VMUX_COMPOSITE1,
 384                         .vmux     = SAA7115_COMPOSITE0,
 385                         .amux     = EM28XX_AMUX_LINE_IN,
 386                 }, {
 387                         .type     = EM28XX_VMUX_SVIDEO,
 388                         .vmux     = SAA7115_SVIDEO3,
 389                         .amux     = EM28XX_AMUX_LINE_IN,
 390                 } },
 391         },
 392         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 393                 .name         = "Hercules Smart TV USB 2.0",
 394                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 395                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 396                 .tda9887_conf = TDA9887_PRESENT,
 397                 .decoder      = EM28XX_SAA711X,
 398                 .input        = { {
 399                         .type     = EM28XX_VMUX_TELEVISION,
 400                         .vmux     = SAA7115_COMPOSITE2,
 401                         .amux     = EM28XX_AMUX_LINE_IN,
 402                 }, {
 403                         .type     = EM28XX_VMUX_COMPOSITE1,
 404                         .vmux     = SAA7115_COMPOSITE0,
 405                         .amux     = EM28XX_AMUX_LINE_IN,
 406                 }, {
 407                         .type     = EM28XX_VMUX_SVIDEO,
 408                         .vmux     = SAA7115_SVIDEO3,
 409                         .amux     = EM28XX_AMUX_LINE_IN,
 410                 } },
 411         },
 412         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 413                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 414                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 415                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 416                 .tda9887_conf = TDA9887_PRESENT,
 417                 .decoder      = EM28XX_SAA711X,
 418                 .input        = { {
 419                         .type     = EM28XX_VMUX_TELEVISION,
 420                         .vmux     = SAA7115_COMPOSITE2,
 421                         .amux     = EM28XX_AMUX_VIDEO,
 422                 }, {
 423                         .type     = EM28XX_VMUX_COMPOSITE1,
 424                         .vmux     = SAA7115_COMPOSITE0,
 425                         .amux     = EM28XX_AMUX_LINE_IN,
 426                 }, {
 427                         .type     = EM28XX_VMUX_SVIDEO,
 428                         .vmux     = SAA7115_SVIDEO3,
 429                         .amux     = EM28XX_AMUX_LINE_IN,
 430                 } },
 431         },
 432         [EM2820_BOARD_GADMEI_UTV310] = {
 433                 .name         = "Gadmei UTV310",
 434                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 435                 .tuner_type   = TUNER_TNF_5335MF,
 436                 .tda9887_conf = TDA9887_PRESENT,
 437                 .decoder      = EM28XX_SAA711X,
 438                 .input        = { {
 439                         .type     = EM28XX_VMUX_TELEVISION,
 440                         .vmux     = SAA7115_COMPOSITE1,
 441                         .amux     = EM28XX_AMUX_LINE_IN,
 442                 }, {
 443                         .type     = EM28XX_VMUX_COMPOSITE1,
 444                         .vmux     = SAA7115_COMPOSITE0,
 445                         .amux     = EM28XX_AMUX_LINE_IN,
 446                 }, {
 447                         .type     = EM28XX_VMUX_SVIDEO,
 448                         .vmux     = SAA7115_SVIDEO3,
 449                         .amux     = EM28XX_AMUX_LINE_IN,
 450                 } },
 451         },
 452         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 453                 .name         = "Leadtek Winfast USB II Deluxe",
 454                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 455                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 456                 .tda9887_conf = TDA9887_PRESENT,
 457                 .decoder      = EM28XX_SAA711X,
 458                 .input        = { {
 459                         .type     = EM28XX_VMUX_TELEVISION,
 460                         .vmux     = SAA7115_COMPOSITE2,
 461                         .amux     = EM28XX_AMUX_VIDEO,
 462                 }, {
 463                         .type     = EM28XX_VMUX_COMPOSITE1,
 464                         .vmux     = SAA7115_COMPOSITE0,
 465                         .amux     = EM28XX_AMUX_LINE_IN,
 466                 }, {
 467                         .type     = EM28XX_VMUX_SVIDEO,
 468                         .vmux     = SAA7115_COMPOSITE0,
 469                         .amux     = EM28XX_AMUX_LINE_IN,
 470                 } },
 471         },
 472         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 473                 .name         = "Videology 20K14XUSB USB2.0",
 474                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 475                 .tuner_type   = TUNER_ABSENT,
 476                 .is_webcam    = 1,
 477                 .input        = { {
 478                         .type     = EM28XX_VMUX_COMPOSITE1,
 479                         .vmux     = 0,
 480                         .amux     = EM28XX_AMUX_VIDEO,
 481                 } },
 482         },
 483         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
 484                 .name         = "Silvercrest Webcam 1.3mpix",
 485                 .tuner_type   = TUNER_ABSENT,
 486                 .is_webcam    = 1,
 487                 .input        = { {
 488                         .type     = EM28XX_VMUX_COMPOSITE1,
 489                         .vmux     = 0,
 490                         .amux     = EM28XX_AMUX_VIDEO,
 491                         .gpio     = silvercrest_reg_seq,
 492                 } },
 493         },
 494         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 495                 .name         = "Supercomp USB 2.0 TV",
 496                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 497                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 498                 .tda9887_conf = TDA9887_PRESENT |
 499                                 TDA9887_PORT1_ACTIVE |
 500                                 TDA9887_PORT2_ACTIVE,
 501                 .decoder      = EM28XX_SAA711X,
 502                 .input        = { {
 503                         .type     = EM28XX_VMUX_TELEVISION,
 504                         .vmux     = SAA7115_COMPOSITE2,
 505                         .amux     = EM28XX_AMUX_LINE_IN,
 506                 }, {
 507                         .type     = EM28XX_VMUX_COMPOSITE1,
 508                         .vmux     = SAA7115_COMPOSITE0,
 509                         .amux     = EM28XX_AMUX_VIDEO,
 510                 }, {
 511                         .type     = EM28XX_VMUX_SVIDEO,
 512                         .vmux     = SAA7115_SVIDEO3,
 513                         .amux     = EM28XX_AMUX_LINE_IN,
 514                 } },
 515         },
 516         [EM2821_BOARD_USBGEAR_VD204] = {
 517                 .name         = "Usbgear VD204v9",
 518                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 519                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 520                 .decoder      = EM28XX_SAA711X,
 521                 .input        = { {
 522                         .type  = EM28XX_VMUX_COMPOSITE1,
 523                         .vmux  = SAA7115_COMPOSITE0,
 524                         .amux  = EM28XX_AMUX_LINE_IN,
 525                 }, {
 526                         .type  = EM28XX_VMUX_SVIDEO,
 527                         .vmux  = SAA7115_SVIDEO3,
 528                         .amux  = EM28XX_AMUX_LINE_IN,
 529                 } },
 530         },
 531         [EM2860_BOARD_NETGMBH_CAM] = {
 532                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 533                 .name         = "NetGMBH Cam",
 534                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 535                 .tuner_type   = TUNER_ABSENT,
 536                 .is_webcam    = 1,
 537                 .input        = { {
 538                         .type     = EM28XX_VMUX_COMPOSITE1,
 539                         .vmux     = 0,
 540                         .amux     = EM28XX_AMUX_VIDEO,
 541                 } },
 542         },
 543         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 544                 .name         = "Typhoon DVD Maker",
 545                 .decoder      = EM28XX_SAA711X,
 546                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 547                 .input        = { {
 548                         .type  = EM28XX_VMUX_COMPOSITE1,
 549                         .vmux  = SAA7115_COMPOSITE0,
 550                         .amux  = EM28XX_AMUX_LINE_IN,
 551                 }, {
 552                         .type  = EM28XX_VMUX_SVIDEO,
 553                         .vmux  = SAA7115_SVIDEO3,
 554                         .amux  = EM28XX_AMUX_LINE_IN,
 555                 } },
 556         },
 557         [EM2860_BOARD_GADMEI_UTV330] = {
 558                 .name         = "Gadmei UTV330",
 559                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 560                 .tuner_type   = TUNER_TNF_5335MF,
 561                 .tda9887_conf = TDA9887_PRESENT,
 562                 .decoder      = EM28XX_SAA711X,
 563                 .input        = { {
 564                         .type     = EM28XX_VMUX_TELEVISION,
 565                         .vmux     = SAA7115_COMPOSITE2,
 566                         .amux     = EM28XX_AMUX_VIDEO,
 567                 }, {
 568                         .type     = EM28XX_VMUX_COMPOSITE1,
 569                         .vmux     = SAA7115_COMPOSITE0,
 570                         .amux     = EM28XX_AMUX_LINE_IN,
 571                 }, {
 572                         .type     = EM28XX_VMUX_SVIDEO,
 573                         .vmux     = SAA7115_SVIDEO3,
 574                         .amux     = EM28XX_AMUX_LINE_IN,
 575                 } },
 576         },
 577         [EM2861_BOARD_GADMEI_UTV330PLUS] = {
 578                 .name         = "Gadmei UTV330+",
 579                 .tuner_type   = TUNER_TNF_5335MF,
 580                 .tda9887_conf = TDA9887_PRESENT,
 581                 .ir_codes     = &ir_codes_gadmei_rm008z_table,
 582                 .decoder      = EM28XX_SAA711X,
 583                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 584                 .input        = { {
 585                         .type     = EM28XX_VMUX_TELEVISION,
 586                         .vmux     = SAA7115_COMPOSITE2,
 587                         .amux     = EM28XX_AMUX_VIDEO,
 588                 }, {
 589                         .type     = EM28XX_VMUX_COMPOSITE1,
 590                         .vmux     = SAA7115_COMPOSITE0,
 591                         .amux     = EM28XX_AMUX_LINE_IN,
 592                 }, {
 593                         .type     = EM28XX_VMUX_SVIDEO,
 594                         .vmux     = SAA7115_SVIDEO3,
 595                         .amux     = EM28XX_AMUX_LINE_IN,
 596                 } },
 597         },
 598         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 599                 .name         = "Terratec Cinergy A Hybrid XS",
 600                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 601                 .tuner_type   = TUNER_XC2028,
 602                 .tuner_gpio   = default_tuner_gpio,
 603                 .decoder      = EM28XX_TVP5150,
 604
 605                 .input        = { {
 606                         .type     = EM28XX_VMUX_TELEVISION,
 607                         .vmux     = TVP5150_COMPOSITE0,
 608                         .amux     = EM28XX_AMUX_VIDEO,
 609                         .gpio     = hauppauge_wintv_hvr_900_analog,
 610                 }, {
 611                         .type     = EM28XX_VMUX_COMPOSITE1,
 612                         .vmux     = TVP5150_COMPOSITE1,
 613                         .amux     = EM28XX_AMUX_LINE_IN,
 614                         .gpio     = hauppauge_wintv_hvr_900_analog,
 615                 }, {
 616                         .type     = EM28XX_VMUX_SVIDEO,
 617                         .vmux     = TVP5150_SVIDEO,
 618                         .amux     = EM28XX_AMUX_LINE_IN,
 619                         .gpio     = hauppauge_wintv_hvr_900_analog,
 620                 } },
 621         },
 622         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 623                 .name         = "KWorld PVRTV 300U",
 624                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 625                 .tuner_type   = TUNER_XC2028,
 626                 .tuner_gpio   = default_tuner_gpio,
 627                 .decoder      = EM28XX_TVP5150,
 628                 .input        = { {
 629                         .type     = EM28XX_VMUX_TELEVISION,
 630                         .vmux     = TVP5150_COMPOSITE0,
 631                         .amux     = EM28XX_AMUX_VIDEO,
 632                 }, {
 633                         .type     = EM28XX_VMUX_COMPOSITE1,
 634                         .vmux     = TVP5150_COMPOSITE1,
 635                         .amux     = EM28XX_AMUX_LINE_IN,
 636                 }, {
 637                         .type     = EM28XX_VMUX_SVIDEO,
 638                         .vmux     = TVP5150_SVIDEO,
 639                         .amux     = EM28XX_AMUX_LINE_IN,
 640                 } },
 641         },
 642         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 643                 .name          = "Yakumo MovieMixer",
 644                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 645                 .decoder       = EM28XX_TVP5150,
 646                 .input         = { {
 647                         .type     = EM28XX_VMUX_TELEVISION,
 648                         .vmux     = TVP5150_COMPOSITE0,
 649                         .amux     = EM28XX_AMUX_VIDEO,
 650                 }, {
 651                         .type     = EM28XX_VMUX_COMPOSITE1,
 652                         .vmux     = TVP5150_COMPOSITE1,
 653                         .amux     = EM28XX_AMUX_LINE_IN,
 654                 }, {
 655                         .type     = EM28XX_VMUX_SVIDEO,
 656                         .vmux     = TVP5150_SVIDEO,
 657                         .amux     = EM28XX_AMUX_LINE_IN,
 658                 } },
 659         },
 660         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 661                 .name         = "Plextor ConvertX PX-TV100U",
 662                 .tuner_type   = TUNER_TNF_5335MF,
 663                 .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
 664                                 EM28XX_XCLK_FREQUENCY_12MHZ,
 665                 .tda9887_conf = TDA9887_PRESENT,
 666                 .decoder      = EM28XX_TVP5150,
 667                 .has_msp34xx  = 1,
 668                 .input        = { {
 669                         .type     = EM28XX_VMUX_TELEVISION,
 670                         .vmux     = TVP5150_COMPOSITE0,
 671                         .amux     = EM28XX_AMUX_LINE_IN,
 672                         .gpio     = pinnacle_hybrid_pro_analog,
 673                 }, {
 674                         .type     = EM28XX_VMUX_COMPOSITE1,
 675                         .vmux     = TVP5150_COMPOSITE1,
 676                         .amux     = EM28XX_AMUX_LINE_IN,
 677                         .gpio     = pinnacle_hybrid_pro_analog,
 678                 }, {
 679                         .type     = EM28XX_VMUX_SVIDEO,
 680                         .vmux     = TVP5150_SVIDEO,
 681                         .amux     = EM28XX_AMUX_LINE_IN,
 682                         .gpio     = pinnacle_hybrid_pro_analog,
 683                 } },
 684         },
 685
 686         /* Those boards with em2870 are DVB Only*/
 687
 688         [EM2870_BOARD_TERRATEC_XS] = {
 689                 .name         = "Terratec Cinergy T XS",
 690                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 691                 .tuner_type   = TUNER_XC2028,
 692                 .tuner_gpio   = default_tuner_gpio,
 693         },
 694         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 695                 .name         = "Terratec Cinergy T XS (MT2060)",
 696                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 697                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 698         },
 699         [EM2870_BOARD_KWORLD_350U] = {
 700                 .name         = "Kworld 350 U DVB-T",
 701                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 702                 .tuner_type   = TUNER_XC2028,
 703                 .tuner_gpio   = default_tuner_gpio,
 704         },
 705         [EM2870_BOARD_KWORLD_355U] = {
 706                 .name         = "Kworld 355 U DVB-T",
 707                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 708         },
 709         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 710                 .name         = "Pinnacle PCTV DVB-T",
 711                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 712                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 713                 /* djh - I have serious doubts this is right... */
 714                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 715                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 716         },
 717         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 718                 .name         = "Compro, VideoMate U3",
 719                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 720                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 721         },
 722
 723         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 724                 .name         = "Terratec Hybrid XS Secam",
 725                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 726                 .has_msp34xx  = 1,
 727                 .tuner_type   = TUNER_XC2028,
 728                 .tuner_gpio   = default_tuner_gpio,
 729                 .decoder      = EM28XX_TVP5150,
 730                 .input        = { {
 731                         .type     = EM28XX_VMUX_TELEVISION,
 732                         .vmux     = TVP5150_COMPOSITE0,
 733                         .amux     = EM28XX_AMUX_VIDEO,
 734                         .gpio     = default_analog,
 735                 }, {
 736                         .type     = EM28XX_VMUX_COMPOSITE1,
 737                         .vmux     = TVP5150_COMPOSITE1,
 738                         .amux     = EM28XX_AMUX_LINE_IN,
 739                         .gpio     = default_analog,
 740                 }, {
 741                         .type     = EM28XX_VMUX_SVIDEO,
 742                         .vmux     = TVP5150_SVIDEO,
 743                         .amux     = EM28XX_AMUX_LINE_IN,
 744                         .gpio     = default_analog,
 745                 } },
 746         },
 747         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 748                 .name         = "Hauppauge WinTV HVR 900",
 749                 .tda9887_conf = TDA9887_PRESENT,
 750                 .tuner_type   = TUNER_XC2028,
 751                 .tuner_gpio   = default_tuner_gpio,
 752                 .mts_firmware = 1,
 753                 .has_dvb      = 1,
 754                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 755                 .ir_codes     = &ir_codes_hauppauge_new_table,
 756                 .decoder      = EM28XX_TVP5150,
 757                 .input        = { {
 758                         .type     = EM28XX_VMUX_TELEVISION,
 759                         .vmux     = TVP5150_COMPOSITE0,
 760                         .amux     = EM28XX_AMUX_VIDEO,
 761                         .gpio     = hauppauge_wintv_hvr_900_analog,
 762                 }, {
 763                         .type     = EM28XX_VMUX_COMPOSITE1,
 764                         .vmux     = TVP5150_COMPOSITE1,
 765                         .amux     = EM28XX_AMUX_LINE_IN,
 766                         .gpio     = hauppauge_wintv_hvr_900_analog,
 767                 }, {
 768                         .type     = EM28XX_VMUX_SVIDEO,
 769                         .vmux     = TVP5150_SVIDEO,
 770                         .amux     = EM28XX_AMUX_LINE_IN,
 771                         .gpio     = hauppauge_wintv_hvr_900_analog,
 772                 } },
 773         },
 774         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 775                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 776                 .tda9887_conf = TDA9887_PRESENT,
 777                 .tuner_type   = TUNER_XC2028,
 778                 .tuner_gpio   = default_tuner_gpio,
 779                 .mts_firmware = 1,
 780                 .ir_codes     = &ir_codes_hauppauge_new_table,
 781                 .decoder      = EM28XX_TVP5150,
 782                 .input        = { {
 783                         .type     = EM28XX_VMUX_TELEVISION,
 784                         .vmux     = TVP5150_COMPOSITE0,
 785                         .amux     = EM28XX_AMUX_VIDEO,
 786                         .gpio     = hauppauge_wintv_hvr_900_analog,
 787                 }, {
 788                         .type     = EM28XX_VMUX_COMPOSITE1,
 789                         .vmux     = TVP5150_COMPOSITE1,
 790                         .amux     = EM28XX_AMUX_LINE_IN,
 791                         .gpio     = hauppauge_wintv_hvr_900_analog,
 792                 }, {
 793                         .type     = EM28XX_VMUX_SVIDEO,
 794                         .vmux     = TVP5150_SVIDEO,
 795                         .amux     = EM28XX_AMUX_LINE_IN,
 796                         .gpio     = hauppauge_wintv_hvr_900_analog,
 797                 } },
 798         },
 799         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
 800                 .name           = "Hauppauge WinTV HVR 850",
 801                 .tuner_type     = TUNER_XC2028,
 802                 .tuner_gpio     = default_tuner_gpio,
 803                 .mts_firmware   = 1,
 804                 .has_dvb        = 1,
 805                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 806                 .ir_codes       = &ir_codes_hauppauge_new_table,
 807                 .decoder        = EM28XX_TVP5150,
 808                 .input          = { {
 809                         .type     = EM28XX_VMUX_TELEVISION,
 810                         .vmux     = TVP5150_COMPOSITE0,
 811                         .amux     = EM28XX_AMUX_VIDEO,
 812                         .gpio     = hauppauge_wintv_hvr_900_analog,
 813                 }, {
 814                         .type     = EM28XX_VMUX_COMPOSITE1,
 815                         .vmux     = TVP5150_COMPOSITE1,
 816                         .amux     = EM28XX_AMUX_LINE_IN,
 817                         .gpio     = hauppauge_wintv_hvr_900_analog,
 818                 }, {
 819                         .type     = EM28XX_VMUX_SVIDEO,
 820                         .vmux     = TVP5150_SVIDEO,
 821                         .amux     = EM28XX_AMUX_LINE_IN,
 822                         .gpio     = hauppauge_wintv_hvr_900_analog,
 823                 } },
 824         },
 825         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 826                 .name           = "Hauppauge WinTV HVR 950",
 827                 .tuner_type     = TUNER_XC2028,
 828                 .tuner_gpio     = default_tuner_gpio,
 829                 .mts_firmware   = 1,
 830                 .has_dvb        = 1,
 831                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 832                 .ir_codes       = &ir_codes_hauppauge_new_table,
 833                 .decoder        = EM28XX_TVP5150,
 834                 .input          = { {
 835                         .type     = EM28XX_VMUX_TELEVISION,
 836                         .vmux     = TVP5150_COMPOSITE0,
 837                         .amux     = EM28XX_AMUX_VIDEO,
 838                         .gpio     = hauppauge_wintv_hvr_900_analog,
 839                 }, {
 840                         .type     = EM28XX_VMUX_COMPOSITE1,
 841                         .vmux     = TVP5150_COMPOSITE1,
 842                         .amux     = EM28XX_AMUX_LINE_IN,
 843                         .gpio     = hauppauge_wintv_hvr_900_analog,
 844                 }, {
 845                         .type     = EM28XX_VMUX_SVIDEO,
 846                         .vmux     = TVP5150_SVIDEO,
 847                         .amux     = EM28XX_AMUX_LINE_IN,
 848                         .gpio     = hauppauge_wintv_hvr_900_analog,
 849                 } },
 850         },
 851         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 852                 .name           = "Pinnacle PCTV HD Pro Stick",
 853                 .tuner_type     = TUNER_XC2028,
 854                 .tuner_gpio   = default_tuner_gpio,
 855                 .mts_firmware   = 1,
 856                 .has_dvb        = 1,
 857                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 858                 .ir_codes       = &ir_codes_pinnacle_pctv_hd_table,
 859                 .decoder        = EM28XX_TVP5150,
 860                 .input          = { {
 861                         .type     = EM28XX_VMUX_TELEVISION,
 862                         .vmux     = TVP5150_COMPOSITE0,
 863                         .amux     = EM28XX_AMUX_VIDEO,
 864                         .gpio     = hauppauge_wintv_hvr_900_analog,
 865                 }, {
 866                         .type     = EM28XX_VMUX_COMPOSITE1,
 867                         .vmux     = TVP5150_COMPOSITE1,
 868                         .amux     = EM28XX_AMUX_LINE_IN,
 869                         .gpio     = hauppauge_wintv_hvr_900_analog,
 870                 }, {
 871                         .type     = EM28XX_VMUX_SVIDEO,
 872                         .vmux     = TVP5150_SVIDEO,
 873                         .amux     = EM28XX_AMUX_LINE_IN,
 874                         .gpio     = hauppauge_wintv_hvr_900_analog,
 875                 } },
 876         },
 877         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 878                 .name           = "AMD ATI TV Wonder HD 600",
 879                 .tuner_type     = TUNER_XC2028,
 880                 .tuner_gpio     = default_tuner_gpio,
 881                 .mts_firmware   = 1,
 882                 .has_dvb        = 1,
 883                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 884                 .ir_codes       = &ir_codes_ati_tv_wonder_hd_600_table,
 885                 .decoder        = EM28XX_TVP5150,
 886                 .input          = { {
 887                         .type     = EM28XX_VMUX_TELEVISION,
 888                         .vmux     = TVP5150_COMPOSITE0,
 889                         .amux     = EM28XX_AMUX_VIDEO,
 890                         .gpio     = hauppauge_wintv_hvr_900_analog,
 891                 }, {
 892                         .type     = EM28XX_VMUX_COMPOSITE1,
 893                         .vmux     = TVP5150_COMPOSITE1,
 894                         .amux     = EM28XX_AMUX_LINE_IN,
 895                         .gpio     = hauppauge_wintv_hvr_900_analog,
 896                 }, {
 897                         .type     = EM28XX_VMUX_SVIDEO,
 898                         .vmux     = TVP5150_SVIDEO,
 899                         .amux     = EM28XX_AMUX_LINE_IN,
 900                         .gpio     = hauppauge_wintv_hvr_900_analog,
 901                 } },
 902         },
 903         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 904                 .name           = "Terratec Hybrid XS",
 905                 .tuner_type     = TUNER_XC2028,
 906                 .tuner_gpio     = default_tuner_gpio,
 907                 .decoder        = EM28XX_TVP5150,
 908                 .has_dvb        = 1,
 909                 .dvb_gpio       = default_digital,
 910                 .ir_codes       = &ir_codes_terratec_cinergy_xs_table,
 911                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
 912                 .input          = { {
 913                         .type     = EM28XX_VMUX_TELEVISION,
 914                         .vmux     = TVP5150_COMPOSITE0,
 915                         .amux     = EM28XX_AMUX_VIDEO,
 916                         .gpio     = default_analog,
 917                 }, {
 918                         .type     = EM28XX_VMUX_COMPOSITE1,
 919                         .vmux     = TVP5150_COMPOSITE1,
 920                         .amux     = EM28XX_AMUX_LINE_IN,
 921                         .gpio     = default_analog,
 922                 }, {
 923                         .type     = EM28XX_VMUX_SVIDEO,
 924                         .vmux     = TVP5150_SVIDEO,
 925                         .amux     = EM28XX_AMUX_LINE_IN,
 926                         .gpio     = default_analog,
 927                 } },
 928         },
 929         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 930            as Prodigy XS with a different PID, let's keep it separated for now
 931            maybe we'll need it lateron */
 932         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 933                 .name         = "Terratec Prodigy XS",
 934                 .tuner_type   = TUNER_XC2028,
 935                 .tuner_gpio   = default_tuner_gpio,
 936                 .decoder      = EM28XX_TVP5150,
 937                 .input        = { {
 938                         .type     = EM28XX_VMUX_TELEVISION,
 939                         .vmux     = TVP5150_COMPOSITE0,
 940                         .amux     = EM28XX_AMUX_VIDEO,
 941                         .gpio     = hauppauge_wintv_hvr_900_analog,
 942                 }, {
 943                         .type     = EM28XX_VMUX_COMPOSITE1,
 944                         .vmux     = TVP5150_COMPOSITE1,
 945                         .amux     = EM28XX_AMUX_LINE_IN,
 946                         .gpio     = hauppauge_wintv_hvr_900_analog,
 947                 }, {
 948                         .type     = EM28XX_VMUX_SVIDEO,
 949                         .vmux     = TVP5150_SVIDEO,
 950                         .amux     = EM28XX_AMUX_LINE_IN,
 951                         .gpio     = hauppauge_wintv_hvr_900_analog,
 952                 } },
 953         },
 954         [EM2820_BOARD_MSI_VOX_USB_2] = {
 955                 .name              = "MSI VOX USB 2.0",
 956                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 957                 .tda9887_conf      = TDA9887_PRESENT      |
 958                                      TDA9887_PORT1_ACTIVE |
 959                                      TDA9887_PORT2_ACTIVE,
 960                 .max_range_640_480 = 1,
 961                 .decoder           = EM28XX_SAA711X,
 962                 .input             = { {
 963                         .type      = EM28XX_VMUX_TELEVISION,
 964                         .vmux      = SAA7115_COMPOSITE4,
 965                         .amux      = EM28XX_AMUX_VIDEO,
 966                 }, {
 967                         .type      = EM28XX_VMUX_COMPOSITE1,
 968                         .vmux      = SAA7115_COMPOSITE0,
 969                         .amux      = EM28XX_AMUX_LINE_IN,
 970                 }, {
 971                         .type      = EM28XX_VMUX_SVIDEO,
 972                         .vmux      = SAA7115_SVIDEO3,
 973                         .amux      = EM28XX_AMUX_LINE_IN,
 974                 } },
 975         },
 976         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 977                 .name         = "Terratec Cinergy 200 USB",
 978                 .is_em2800    = 1,
 979                 .has_ir_i2c   = 1,
 980                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 981                 .tda9887_conf = TDA9887_PRESENT,
 982                 .decoder      = EM28XX_SAA711X,
 983                 .input        = { {
 984                         .type     = EM28XX_VMUX_TELEVISION,
 985                         .vmux     = SAA7115_COMPOSITE2,
 986                         .amux     = EM28XX_AMUX_VIDEO,
 987                 }, {
 988                         .type     = EM28XX_VMUX_COMPOSITE1,
 989                         .vmux     = SAA7115_COMPOSITE0,
 990                         .amux     = EM28XX_AMUX_LINE_IN,
 991                 }, {
 992                         .type     = EM28XX_VMUX_SVIDEO,
 993                         .vmux     = SAA7115_SVIDEO3,
 994                         .amux     = EM28XX_AMUX_LINE_IN,
 995                 } },
 996         },
 997         [EM2800_BOARD_GRABBEEX_USB2800] = {
 998                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 999                 .is_em2800  = 1,
1000                 .decoder    = EM28XX_SAA711X,
1001                 .tuner_type = TUNER_ABSENT, /* capture only board */
1002                 .input      = { {
1003                         .type     = EM28XX_VMUX_COMPOSITE1,
1004                         .vmux     = SAA7115_COMPOSITE0,
1005                         .amux     = EM28XX_AMUX_LINE_IN,
1006                 }, {
1007                         .type     = EM28XX_VMUX_SVIDEO,
1008                         .vmux     = SAA7115_SVIDEO3,
1009                         .amux     = EM28XX_AMUX_LINE_IN,
1010                 } },
1011         },
1012         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1013                 .name         = "Leadtek Winfast USB II",
1014                 .is_em2800    = 1,
1015                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1016                 .tda9887_conf = TDA9887_PRESENT,
1017                 .decoder      = EM28XX_SAA711X,
1018                 .input        = { {
1019                         .type     = EM28XX_VMUX_TELEVISION,
1020                         .vmux     = SAA7115_COMPOSITE2,
1021                         .amux     = EM28XX_AMUX_VIDEO,
1022                 }, {
1023                         .type     = EM28XX_VMUX_COMPOSITE1,
1024                         .vmux     = SAA7115_COMPOSITE0,
1025                         .amux     = EM28XX_AMUX_LINE_IN,
1026                 }, {
1027                         .type     = EM28XX_VMUX_SVIDEO,
1028                         .vmux     = SAA7115_SVIDEO3,
1029                         .amux     = EM28XX_AMUX_LINE_IN,
1030                 } },
1031         },
1032         [EM2800_BOARD_KWORLD_USB2800] = {
1033                 .name         = "Kworld USB2800",
1034                 .is_em2800    = 1,
1035                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
1036                 .tda9887_conf = TDA9887_PRESENT,
1037                 .decoder      = EM28XX_SAA711X,
1038                 .input        = { {
1039                         .type     = EM28XX_VMUX_TELEVISION,
1040                         .vmux     = SAA7115_COMPOSITE2,
1041                         .amux     = EM28XX_AMUX_VIDEO,
1042                 }, {
1043                         .type     = EM28XX_VMUX_COMPOSITE1,
1044                         .vmux     = SAA7115_COMPOSITE0,
1045                         .amux     = EM28XX_AMUX_LINE_IN,
1046                 }, {
1047                         .type     = EM28XX_VMUX_SVIDEO,
1048                         .vmux     = SAA7115_SVIDEO3,
1049                         .amux     = EM28XX_AMUX_LINE_IN,
1050                 } },
1051         },
1052         [EM2820_BOARD_PINNACLE_DVC_90] = {
1053                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1054                                 "/ Kworld DVD Maker 2",
1055                 .tuner_type   = TUNER_ABSENT, /* capture only board */
1056                 .decoder      = EM28XX_SAA711X,
1057                 .input        = { {
1058                         .type     = EM28XX_VMUX_COMPOSITE1,
1059                         .vmux     = SAA7115_COMPOSITE0,
1060                         .amux     = EM28XX_AMUX_LINE_IN,
1061                 }, {
1062                         .type     = EM28XX_VMUX_SVIDEO,
1063                         .vmux     = SAA7115_SVIDEO3,
1064                         .amux     = EM28XX_AMUX_LINE_IN,
1065                 } },
1066         },
1067         [EM2800_BOARD_VGEAR_POCKETTV] = {
1068                 .name         = "V-Gear PocketTV",
1069                 .is_em2800    = 1,
1070                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1071                 .tda9887_conf = TDA9887_PRESENT,
1072                 .decoder      = EM28XX_SAA711X,
1073                 .input        = { {
1074                         .type     = EM28XX_VMUX_TELEVISION,
1075                         .vmux     = SAA7115_COMPOSITE2,
1076                         .amux     = EM28XX_AMUX_VIDEO,
1077                 }, {
1078                         .type     = EM28XX_VMUX_COMPOSITE1,
1079                         .vmux     = SAA7115_COMPOSITE0,
1080                         .amux     = EM28XX_AMUX_LINE_IN,
1081                 }, {
1082                         .type     = EM28XX_VMUX_SVIDEO,
1083                         .vmux     = SAA7115_SVIDEO3,
1084                         .amux     = EM28XX_AMUX_LINE_IN,
1085                 } },
1086         },
1087         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1088                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
1089                 .tda9887_conf = TDA9887_PRESENT,
1090                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1091                 .decoder      = EM28XX_SAA711X,
1092                 .input        = { {
1093                         .type     = EM28XX_VMUX_TELEVISION,
1094                         .vmux     = SAA7115_COMPOSITE2,
1095                         .amux     = EM28XX_AMUX_VIDEO,
1096                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1097                                     EM28XX_AOUT_MASTER, /* Line out pin */
1098                 }, {
1099                         .type     = EM28XX_VMUX_COMPOSITE1,
1100                         .vmux     = SAA7115_COMPOSITE0,
1101                         .amux     = EM28XX_AMUX_LINE_IN,
1102                 }, {
1103                         .type     = EM28XX_VMUX_SVIDEO,
1104                         .vmux     = SAA7115_SVIDEO3,
1105                         .amux     = EM28XX_AMUX_LINE_IN,
1106                 } },
1107         },
1108         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1109                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1110                 .has_snapshot_button = 1,
1111                 .tda9887_conf = TDA9887_PRESENT,
1112                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1113                 .decoder      = EM28XX_SAA711X,
1114                 .input        = { {
1115                         .type     = EM28XX_VMUX_TELEVISION,
1116                         .vmux     = SAA7115_COMPOSITE2,
1117                         .amux     = EM28XX_AMUX_VIDEO,
1118                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1119                                     EM28XX_AOUT_MASTER, /* Line out pin */
1120                 }, {
1121                         .type     = EM28XX_VMUX_COMPOSITE1,
1122                         .vmux     = SAA7115_COMPOSITE0,
1123                         .amux     = EM28XX_AMUX_LINE_IN,
1124                 }, {
1125                         .type     = EM28XX_VMUX_SVIDEO,
1126                         .vmux     = SAA7115_SVIDEO3,
1127                         .amux     = EM28XX_AMUX_LINE_IN,
1128                 } },
1129         },
1130         [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1131                 .name                = "EM2860/SAA711X Reference Design",
1132                 .has_snapshot_button = 1,
1133                 .tuner_type          = TUNER_ABSENT,
1134                 .decoder             = EM28XX_SAA711X,
1135                 .input               = { {
1136                         .type     = EM28XX_VMUX_SVIDEO,
1137                         .vmux     = SAA7115_SVIDEO3,
1138                 }, {
1139                         .type     = EM28XX_VMUX_COMPOSITE1,
1140                         .vmux     = SAA7115_COMPOSITE0,
1141                 } },
1142         },
1143         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1144                 .name         = "MSI DigiVox A/D",
1145                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1146                 .tuner_type   = TUNER_XC2028,
1147                 .tuner_gpio   = default_tuner_gpio,
1148                 .decoder      = EM28XX_TVP5150,
1149                 .input        = { {
1150                         .type     = EM28XX_VMUX_TELEVISION,
1151                         .vmux     = TVP5150_COMPOSITE0,
1152                         .amux     = EM28XX_AMUX_VIDEO,
1153                         .gpio     = em2880_msi_digivox_ad_analog,
1154                 }, {
1155                         .type     = EM28XX_VMUX_COMPOSITE1,
1156                         .vmux     = TVP5150_COMPOSITE1,
1157                         .amux     = EM28XX_AMUX_LINE_IN,
1158                         .gpio     = em2880_msi_digivox_ad_analog,
1159                 }, {
1160                         .type     = EM28XX_VMUX_SVIDEO,
1161                         .vmux     = TVP5150_SVIDEO,
1162                         .amux     = EM28XX_AMUX_LINE_IN,
1163                         .gpio     = em2880_msi_digivox_ad_analog,
1164                 } },
1165         },
1166         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1167                 .name         = "MSI DigiVox A/D II",
1168                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1169                 .tuner_type   = TUNER_XC2028,
1170                 .tuner_gpio   = default_tuner_gpio,
1171                 .decoder      = EM28XX_TVP5150,
1172                 .input        = { {
1173                         .type     = EM28XX_VMUX_TELEVISION,
1174                         .vmux     = TVP5150_COMPOSITE0,
1175                         .amux     = EM28XX_AMUX_VIDEO,
1176                         .gpio     = em2880_msi_digivox_ad_analog,
1177                 }, {
1178                         .type     = EM28XX_VMUX_COMPOSITE1,
1179                         .vmux     = TVP5150_COMPOSITE1,
1180                         .amux     = EM28XX_AMUX_LINE_IN,
1181                         .gpio     = em2880_msi_digivox_ad_analog,
1182                 }, {
1183                         .type     = EM28XX_VMUX_SVIDEO,
1184                         .vmux     = TVP5150_SVIDEO,
1185                         .amux     = EM28XX_AMUX_LINE_IN,
1186                         .gpio     = em2880_msi_digivox_ad_analog,
1187                 } },
1188         },
1189         [EM2880_BOARD_KWORLD_DVB_305U] = {
1190                 .name         = "KWorld DVB-T 305U",
1191                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1192                 .tuner_type   = TUNER_XC2028,
1193                 .tuner_gpio   = default_tuner_gpio,
1194                 .decoder      = EM28XX_TVP5150,
1195                 .input        = { {
1196                         .type     = EM28XX_VMUX_TELEVISION,
1197                         .vmux     = TVP5150_COMPOSITE0,
1198                         .amux     = EM28XX_AMUX_VIDEO,
1199                 }, {
1200                         .type     = EM28XX_VMUX_COMPOSITE1,
1201                         .vmux     = TVP5150_COMPOSITE1,
1202                         .amux     = EM28XX_AMUX_LINE_IN,
1203                 }, {
1204                         .type     = EM28XX_VMUX_SVIDEO,
1205                         .vmux     = TVP5150_SVIDEO,
1206                         .amux     = EM28XX_AMUX_LINE_IN,
1207                 } },
1208         },
1209         [EM2880_BOARD_KWORLD_DVB_310U] = {
1210                 .name         = "KWorld DVB-T 310U",
1211                 .tuner_type   = TUNER_XC2028,
1212                 .tuner_gpio   = default_tuner_gpio,
1213                 .has_dvb      = 1,
1214                 .dvb_gpio     = default_digital,
1215                 .mts_firmware = 1,
1216                 .decoder      = EM28XX_TVP5150,
1217                 .input        = { {
1218                         .type     = EM28XX_VMUX_TELEVISION,
1219                         .vmux     = TVP5150_COMPOSITE0,
1220                         .amux     = EM28XX_AMUX_VIDEO,
1221                         .gpio     = default_analog,
1222                 }, {
1223                         .type     = EM28XX_VMUX_COMPOSITE1,
1224                         .vmux     = TVP5150_COMPOSITE1,
1225                         .amux     = EM28XX_AMUX_LINE_IN,
1226                         .gpio     = default_analog,
1227                 }, {    /* S-video has not been tested yet */
1228                         .type     = EM28XX_VMUX_SVIDEO,
1229                         .vmux     = TVP5150_SVIDEO,
1230                         .amux     = EM28XX_AMUX_LINE_IN,
1231                         .gpio     = default_analog,
1232                 } },
1233         },
1234         [EM2882_BOARD_KWORLD_ATSC_315U] = {
1235                 .name           = "KWorld ATSC 315U HDTV TV Box",
1236                 .valid          = EM28XX_BOARD_NOT_VALIDATED,
1237                 .tuner_type     = TUNER_THOMSON_DTT761X,
1238                 .tuner_gpio     = em2882_kworld_315u_tuner_gpio,
1239                 .tda9887_conf   = TDA9887_PRESENT,
1240                 .decoder        = EM28XX_SAA711X,
1241                 .has_dvb        = 1,
1242                 .dvb_gpio       = em2882_kworld_315u_digital,
1243                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ,
1244                 .i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE,
1245                 /* Analog mode - still not ready */
1246                 /*.input        = { {
1247                         .type = EM28XX_VMUX_TELEVISION,
1248                         .vmux = SAA7115_COMPOSITE2,
1249                         .amux = EM28XX_AMUX_VIDEO,
1250                         .gpio = em2882_kworld_315u_analog,
1251                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1252                 }, {
1253                         .type = EM28XX_VMUX_COMPOSITE1,
1254                         .vmux = SAA7115_COMPOSITE0,
1255                         .amux = EM28XX_AMUX_LINE_IN,
1256                         .gpio = em2882_kworld_315u_analog1,
1257                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1258                 }, {
1259                         .type = EM28XX_VMUX_SVIDEO,
1260                         .vmux = SAA7115_SVIDEO3,
1261                         .amux = EM28XX_AMUX_LINE_IN,
1262                         .gpio = em2882_kworld_315u_analog1,
1263                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1264                 } }, */
1265         },
1266         [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1267                 .name = "Empire dual TV",
1268                 .tuner_type = TUNER_XC2028,
1269                 .tuner_gpio = default_tuner_gpio,
1270                 .has_dvb = 1,
1271                 .dvb_gpio = default_digital,
1272                 .mts_firmware = 1,
1273                 .decoder = EM28XX_TVP5150,
1274                 .input = { {
1275                         .type = EM28XX_VMUX_TELEVISION,
1276                         .vmux = TVP5150_COMPOSITE0,
1277                         .amux = EM28XX_AMUX_VIDEO,
1278                         .gpio = default_analog,
1279                 }, {
1280                         .type = EM28XX_VMUX_COMPOSITE1,
1281                         .vmux = TVP5150_COMPOSITE1,
1282                         .amux = EM28XX_AMUX_LINE_IN,
1283                         .gpio = default_analog,
1284                 }, {
1285                         .type = EM28XX_VMUX_SVIDEO,
1286                         .vmux = TVP5150_SVIDEO,
1287                         .amux = EM28XX_AMUX_LINE_IN,
1288                         .gpio = default_analog,
1289                 } },
1290         },
1291         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1292                 .name         = "DNT DA2 Hybrid",
1293                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1294                 .tuner_type   = TUNER_XC2028,
1295                 .tuner_gpio   = default_tuner_gpio,
1296                 .decoder      = EM28XX_TVP5150,
1297                 .input        = { {
1298                         .type     = EM28XX_VMUX_TELEVISION,
1299                         .vmux     = TVP5150_COMPOSITE0,
1300                         .amux     = EM28XX_AMUX_VIDEO,
1301                         .gpio     = default_analog,
1302                 }, {
1303                         .type     = EM28XX_VMUX_COMPOSITE1,
1304                         .vmux     = TVP5150_COMPOSITE1,
1305                         .amux     = EM28XX_AMUX_LINE_IN,
1306                         .gpio     = default_analog,
1307                 }, {
1308                         .type     = EM28XX_VMUX_SVIDEO,
1309                         .vmux     = TVP5150_SVIDEO,
1310                         .amux     = EM28XX_AMUX_LINE_IN,
1311                         .gpio     = default_analog,
1312                 } },
1313         },
1314         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1315                 .name         = "Pinnacle Hybrid Pro",
1316                 .tuner_type   = TUNER_XC2028,
1317                 .tuner_gpio   = default_tuner_gpio,
1318                 .decoder      = EM28XX_TVP5150,
1319                 .has_dvb      = 1,
1320                 .dvb_gpio     = pinnacle_hybrid_pro_digital,
1321                 .input        = { {
1322                         .type     = EM28XX_VMUX_TELEVISION,
1323                         .vmux     = TVP5150_COMPOSITE0,
1324                         .amux     = EM28XX_AMUX_VIDEO,
1325                         .gpio     = pinnacle_hybrid_pro_analog,
1326                 }, {
1327                         .type     = EM28XX_VMUX_COMPOSITE1,
1328                         .vmux     = TVP5150_COMPOSITE1,
1329                         .amux     = EM28XX_AMUX_LINE_IN,
1330                         .gpio     = pinnacle_hybrid_pro_analog,
1331                 }, {
1332                         .type     = EM28XX_VMUX_SVIDEO,
1333                         .vmux     = TVP5150_SVIDEO,
1334                         .amux     = EM28XX_AMUX_LINE_IN,
1335                         .gpio     = pinnacle_hybrid_pro_analog,
1336                 } },
1337         },
1338         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1339                 .name         = "Pinnacle Hybrid Pro (2)",
1340                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1341                 .tuner_type   = TUNER_XC2028,
1342                 .tuner_gpio   = default_tuner_gpio,
1343                 .mts_firmware = 1,
1344                 .decoder      = EM28XX_TVP5150,
1345                 .input        = { {
1346                         .type     = EM28XX_VMUX_TELEVISION,
1347                         .vmux     = TVP5150_COMPOSITE0,
1348                         .amux     = EM28XX_AMUX_VIDEO,
1349                         .gpio     = hauppauge_wintv_hvr_900_analog,
1350                 }, {
1351                         .type     = EM28XX_VMUX_COMPOSITE1,
1352                         .vmux     = TVP5150_COMPOSITE1,
1353                         .amux     = EM28XX_AMUX_LINE_IN,
1354                         .gpio     = hauppauge_wintv_hvr_900_analog,
1355                 }, {
1356                         .type     = EM28XX_VMUX_SVIDEO,
1357                         .vmux     = TVP5150_SVIDEO,
1358                         .amux     = EM28XX_AMUX_LINE_IN,
1359                         .gpio     = hauppauge_wintv_hvr_900_analog,
1360                 } },
1361         },
1362         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1363                 .name         = "Kworld VS-DVB-T 323UR",
1364                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1365                 .tuner_type   = TUNER_XC2028,
1366                 .tuner_gpio   = default_tuner_gpio,
1367                 .decoder      = EM28XX_TVP5150,
1368                 .input        = { {
1369                         .type     = EM28XX_VMUX_TELEVISION,
1370                         .vmux     = TVP5150_COMPOSITE0,
1371                         .amux     = EM28XX_AMUX_VIDEO,
1372                 }, {
1373                         .type     = EM28XX_VMUX_COMPOSITE1,
1374                         .vmux     = TVP5150_COMPOSITE1,
1375                         .amux     = EM28XX_AMUX_LINE_IN,
1376                 }, {
1377                         .type     = EM28XX_VMUX_SVIDEO,
1378                         .vmux     = TVP5150_SVIDEO,
1379                         .amux     = EM28XX_AMUX_LINE_IN,
1380                 } },
1381         },
1382         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1383                 .name         = "Terratec Hybrid XS (em2882)",
1384                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1385                 .tuner_type   = TUNER_XC2028,
1386                 .tuner_gpio   = default_tuner_gpio,
1387                 .decoder      = EM28XX_TVP5150,
1388                 .input        = { {
1389                         .type     = EM28XX_VMUX_TELEVISION,
1390                         .vmux     = TVP5150_COMPOSITE0,
1391                         .amux     = EM28XX_AMUX_VIDEO,
1392                         .gpio     = hauppauge_wintv_hvr_900_analog,
1393                 }, {
1394                         .type     = EM28XX_VMUX_COMPOSITE1,
1395                         .vmux     = TVP5150_COMPOSITE1,
1396                         .amux     = EM28XX_AMUX_LINE_IN,
1397                         .gpio     = hauppauge_wintv_hvr_900_analog,
1398                 }, {
1399                         .type     = EM28XX_VMUX_SVIDEO,
1400                         .vmux     = TVP5150_SVIDEO,
1401                         .amux     = EM28XX_AMUX_LINE_IN,
1402                         .gpio     = hauppauge_wintv_hvr_900_analog,
1403                 } },
1404         },
1405         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1406                 .name         = "Kworld PlusTV HD Hybrid 330",
1407                 .tuner_type   = TUNER_XC2028,
1408                 .tuner_gpio   = default_tuner_gpio,
1409                 .decoder      = EM28XX_TVP5150,
1410                 .mts_firmware = 1,
1411                 .has_dvb      = 1,
1412                 .dvb_gpio     = kworld_330u_digital,
1413                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1414                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1415                                     EM28XX_I2C_EEPROM_ON_BOARD |
1416                                     EM28XX_I2C_EEPROM_KEY_VALID,
1417                 .input        = { {
1418                         .type     = EM28XX_VMUX_TELEVISION,
1419                         .vmux     = TVP5150_COMPOSITE0,
1420                         .amux     = EM28XX_AMUX_VIDEO,
1421                         .gpio     = kworld_330u_analog,
1422                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1423                 }, {
1424                         .type     = EM28XX_VMUX_COMPOSITE1,
1425                         .vmux     = TVP5150_COMPOSITE1,
1426                         .amux     = EM28XX_AMUX_LINE_IN,
1427                         .gpio     = kworld_330u_analog,
1428                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1429                 }, {
1430                         .type     = EM28XX_VMUX_SVIDEO,
1431                         .vmux     = TVP5150_SVIDEO,
1432                         .amux     = EM28XX_AMUX_LINE_IN,
1433                         .gpio     = kworld_330u_analog,
1434                 } },
1435         },
1436         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1437                 .name         = "Compro VideoMate ForYou/Stereo",
1438                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1439                 .tvaudio_addr = 0xb0,
1440                 .tda9887_conf = TDA9887_PRESENT,
1441                 .decoder      = EM28XX_TVP5150,
1442                 .adecoder     = EM28XX_TVAUDIO,
1443                 .mute_gpio    = compro_mute_gpio,
1444                 .input        = { {
1445                         .type     = EM28XX_VMUX_TELEVISION,
1446                         .vmux     = TVP5150_COMPOSITE0,
1447                         .amux     = EM28XX_AMUX_VIDEO,
1448                         .gpio     = compro_unmute_tv_gpio,
1449                 }, {
1450                         .type     = EM28XX_VMUX_SVIDEO,
1451                         .vmux     = TVP5150_SVIDEO,
1452                         .amux     = EM28XX_AMUX_LINE_IN,
1453                         .gpio     = compro_unmute_svid_gpio,
1454                 } },
1455         },
1456         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1457                 .name         = "Kaiomy TVnPC U2",
1458                 .vchannels    = 3,
1459                 .tuner_type   = TUNER_XC2028,
1460                 .tuner_addr   = 0x61,
1461                 .mts_firmware = 1,
1462                 .decoder      = EM28XX_TVP5150,
1463                 .tuner_gpio   = default_tuner_gpio,
1464                 .ir_codes     = &ir_codes_kaiomy_table,
1465                 .input          = { {
1466                         .type     = EM28XX_VMUX_TELEVISION,
1467                         .vmux     = TVP5150_COMPOSITE0,
1468                         .amux     = EM28XX_AMUX_VIDEO,
1469
1470                 }, {
1471                         .type     = EM28XX_VMUX_COMPOSITE1,
1472                         .vmux     = TVP5150_COMPOSITE1,
1473                         .amux     = EM28XX_AMUX_LINE_IN,
1474                 }, {
1475                         .type     = EM28XX_VMUX_SVIDEO,
1476                         .vmux     = TVP5150_SVIDEO,
1477                         .amux     = EM28XX_AMUX_LINE_IN,
1478                 } },
1479                 .radio          = {
1480                         .type     = EM28XX_RADIO,
1481                         .amux     = EM28XX_AMUX_LINE_IN,
1482                 }
1483         },
1484         [EM2860_BOARD_EASYCAP] = {
1485                 .name         = "Easy Cap Capture DC-60",
1486                 .vchannels    = 2,
1487                 .tuner_type   = TUNER_ABSENT,
1488                 .decoder      = EM28XX_SAA711X,
1489                 .input           = { {
1490                         .type     = EM28XX_VMUX_COMPOSITE1,
1491                         .vmux     = SAA7115_COMPOSITE0,
1492                         .amux     = EM28XX_AMUX_LINE_IN,
1493                 }, {
1494                         .type     = EM28XX_VMUX_SVIDEO,
1495                         .vmux     = SAA7115_SVIDEO3,
1496                         .amux     = EM28XX_AMUX_LINE_IN,
1497                 } },
1498         },
1499         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1500                 .name       = "IO-DATA GV-MVP/SZ",
1501                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1502                 .tuner_gpio   = default_tuner_gpio,
1503                 .tda9887_conf = TDA9887_PRESENT,
1504                 .decoder      = EM28XX_TVP5150,
1505                 .input        = { {
1506                         .type     = EM28XX_VMUX_TELEVISION,
1507                         .vmux     = TVP5150_COMPOSITE0,
1508                         .amux     = EM28XX_AMUX_VIDEO,
1509                 }, { /* Composite has not been tested yet */
1510                         .type     = EM28XX_VMUX_COMPOSITE1,
1511                         .vmux     = TVP5150_COMPOSITE1,
1512                         .amux     = EM28XX_AMUX_VIDEO,
1513                 }, { /* S-video has not been tested yet */
1514                         .type     = EM28XX_VMUX_SVIDEO,
1515                         .vmux     = TVP5150_SVIDEO,
1516                         .amux     = EM28XX_AMUX_VIDEO,
1517                 } },
1518         },
1519         [EM2860_BOARD_TERRATEC_GRABBY] = {
1520                 .name            = "Terratec Grabby",
1521                 .vchannels       = 2,
1522                 .tuner_type      = TUNER_ABSENT,
1523                 .decoder         = EM28XX_SAA711X,
1524                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1525                 .input           = { {
1526                         .type     = EM28XX_VMUX_COMPOSITE1,
1527                         .vmux     = SAA7115_COMPOSITE0,
1528                         .amux     = EM28XX_AMUX_VIDEO2,
1529                 }, {
1530                         .type     = EM28XX_VMUX_SVIDEO,
1531                         .vmux     = SAA7115_SVIDEO3,
1532                         .amux     = EM28XX_AMUX_VIDEO2,
1533                 } },
1534         },
1535         [EM2860_BOARD_TERRATEC_AV350] = {
1536                 .name            = "Terratec AV350",
1537                 .vchannels       = 2,
1538                 .tuner_type      = TUNER_ABSENT,
1539                 .decoder         = EM28XX_TVP5150,
1540                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1541                 .mute_gpio       = terratec_av350_mute_gpio,
1542                 .input           = { {
1543                         .type     = EM28XX_VMUX_COMPOSITE1,
1544                         .vmux     = TVP5150_COMPOSITE1,
1545                         .amux     = EM28XX_AUDIO_SRC_LINE,
1546                         .gpio     = terratec_av350_unmute_gpio,
1547
1548                 }, {
1549                         .type     = EM28XX_VMUX_SVIDEO,
1550                         .vmux     = TVP5150_SVIDEO,
1551                         .amux     = EM28XX_AUDIO_SRC_LINE,
1552                         .gpio     = terratec_av350_unmute_gpio,
1553                 } },
1554         },
1555         [EM2882_BOARD_EVGA_INDTUBE] = {
1556                 .name         = "Evga inDtube",
1557                 .tuner_type   = TUNER_XC2028,
1558                 .tuner_gpio   = default_tuner_gpio,
1559                 .decoder      = EM28XX_TVP5150,
1560                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1561                 .mts_firmware = 1,
1562                 .has_dvb      = 1,
1563                 .dvb_gpio     = evga_indtube_digital,
1564                 .ir_codes     = &ir_codes_evga_indtube_table,
1565                 .input        = { {
1566                         .type     = EM28XX_VMUX_TELEVISION,
1567                         .vmux     = TVP5150_COMPOSITE0,
1568                         .amux     = EM28XX_AMUX_VIDEO,
1569                         .gpio     = evga_indtube_analog,
1570                 }, {
1571                         .type     = EM28XX_VMUX_COMPOSITE1,
1572                         .vmux     = TVP5150_COMPOSITE1,
1573                         .amux     = EM28XX_AMUX_LINE_IN,
1574                         .gpio     = evga_indtube_analog,
1575                 }, {
1576                         .type     = EM28XX_VMUX_SVIDEO,
1577                         .vmux     = TVP5150_SVIDEO,
1578                         .amux     = EM28XX_AMUX_LINE_IN,
1579                         .gpio     = evga_indtube_analog,
1580                 } },
1581         },
1582         /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1583            Infineon TUA6034) */
1584         [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1585                 .name          = "Reddo DVB-C USB TV Box",
1586                 .tuner_type    = TUNER_ABSENT,
1587                 .has_dvb       = 1,
1588                 .dvb_gpio      = reddo_dvb_c_usb_box,
1589         },
1590 };
1591 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1592
1593 /* table of devices that work with this driver */
1594 struct usb_device_id em28xx_id_table[] = {
1595         { USB_DEVICE(0xeb1a, 0x2750),
1596                         .driver_info = EM2750_BOARD_UNKNOWN },
1597         { USB_DEVICE(0xeb1a, 0x2751),
1598                         .driver_info = EM2750_BOARD_UNKNOWN },
1599         { USB_DEVICE(0xeb1a, 0x2800),
1600                         .driver_info = EM2800_BOARD_UNKNOWN },
1601         { USB_DEVICE(0xeb1a, 0x2710),
1602                         .driver_info = EM2820_BOARD_UNKNOWN },
1603         { USB_DEVICE(0xeb1a, 0x2820),
1604                         .driver_info = EM2820_BOARD_UNKNOWN },
1605         { USB_DEVICE(0xeb1a, 0x2821),
1606                         .driver_info = EM2820_BOARD_UNKNOWN },
1607         { USB_DEVICE(0xeb1a, 0x2860),
1608                         .driver_info = EM2820_BOARD_UNKNOWN },
1609         { USB_DEVICE(0xeb1a, 0x2861),
1610                         .driver_info = EM2820_BOARD_UNKNOWN },
1611         { USB_DEVICE(0xeb1a, 0x2870),
1612                         .driver_info = EM2820_BOARD_UNKNOWN },
1613         { USB_DEVICE(0xeb1a, 0x2881),
1614                         .driver_info = EM2820_BOARD_UNKNOWN },
1615         { USB_DEVICE(0xeb1a, 0x2883),
1616                         .driver_info = EM2820_BOARD_UNKNOWN },
1617         { USB_DEVICE(0xeb1a, 0x2868),
1618                         .driver_info = EM2820_BOARD_UNKNOWN },
1619         { USB_DEVICE(0xeb1a, 0xe300),
1620                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1621         { USB_DEVICE(0xeb1a, 0xe303),
1622                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1623         { USB_DEVICE(0xeb1a, 0xe305),
1624                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1625         { USB_DEVICE(0xeb1a, 0xe310),
1626                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1627         { USB_DEVICE(0xeb1a, 0xa313),
1628                 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1629         { USB_DEVICE(0xeb1a, 0xa316),
1630                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1631         { USB_DEVICE(0xeb1a, 0xe320),
1632                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1633         { USB_DEVICE(0xeb1a, 0xe323),
1634                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1635         { USB_DEVICE(0xeb1a, 0xe350),
1636                         .driver_info = EM2870_BOARD_KWORLD_350U },
1637         { USB_DEVICE(0xeb1a, 0xe355),
1638                         .driver_info = EM2870_BOARD_KWORLD_355U },
1639         { USB_DEVICE(0xeb1a, 0x2801),
1640                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1641         { USB_DEVICE(0xeb1a, 0xe357),
1642                         .driver_info = EM2870_BOARD_KWORLD_355U },
1643         { USB_DEVICE(0x1b80, 0xe302),
1644                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1645         { USB_DEVICE(0x1b80, 0xe304),
1646                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1647         { USB_DEVICE(0x0ccd, 0x0036),
1648                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1649         { USB_DEVICE(0x0ccd, 0x004c),
1650                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1651         { USB_DEVICE(0x0ccd, 0x004f),
1652                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1653         { USB_DEVICE(0x0ccd, 0x005e),
1654                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1655         { USB_DEVICE(0x0ccd, 0x0042),
1656                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1657         { USB_DEVICE(0x0ccd, 0x0043),
1658                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1659         { USB_DEVICE(0x0ccd, 0x0047),
1660                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1661         { USB_DEVICE(0x0ccd, 0x0084),
1662                         .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1663         { USB_DEVICE(0x0ccd, 0x0096),
1664                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1665         { USB_DEVICE(0x185b, 0x2870),
1666                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1667         { USB_DEVICE(0x185b, 0x2041),
1668                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1669         { USB_DEVICE(0x2040, 0x4200),
1670                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1671         { USB_DEVICE(0x2040, 0x4201),
1672                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1673         { USB_DEVICE(0x2040, 0x6500),
1674                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1675         { USB_DEVICE(0x2040, 0x6502),
1676                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1677         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1678                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1679         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1680                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1681         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1682                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1683         { USB_DEVICE(0x2040, 0x651f),
1684                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1685         { USB_DEVICE(0x0438, 0xb002),
1686                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1687         { USB_DEVICE(0x2001, 0xf112),
1688                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1689         { USB_DEVICE(0x2304, 0x0207),
1690                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1691         { USB_DEVICE(0x2304, 0x0208),
1692                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1693         { USB_DEVICE(0x2304, 0x021a),
1694                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1695         { USB_DEVICE(0x2304, 0x0226),
1696                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1697         { USB_DEVICE(0x2304, 0x0227),
1698                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1699         { USB_DEVICE(0x0413, 0x6023),
1700                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1701         { USB_DEVICE(0x093b, 0xa005),
1702                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1703         { USB_DEVICE(0x04bb, 0x0515),
1704                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1705         { USB_DEVICE(0xeb1a, 0x50a6),
1706                         .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1707         { },
1708 };
1709 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1710
1711 /*
1712  * EEPROM hash table for devices with generic USB IDs
1713  */
1714 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1715         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1716         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1717         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1718         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1719         {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1720         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1721         {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1722         {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
1723 };
1724
1725 /* I2C devicelist hash table for devices with generic USB IDs */
1726 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1727         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1728         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1729         {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1730         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1731         {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1732 };
1733
1734 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1735 static unsigned short saa711x_addrs[] = {
1736         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
1737         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
1738         I2C_CLIENT_END };
1739
1740 static unsigned short tvp5150_addrs[] = {
1741         0xb8 >> 1,
1742         0xba >> 1,
1743         I2C_CLIENT_END
1744 };
1745
1746 static unsigned short mt9v011_addrs[] = {
1747         0xba >> 1,
1748         I2C_CLIENT_END
1749 };
1750
1751 static unsigned short msp3400_addrs[] = {
1752         0x80 >> 1,
1753         0x88 >> 1,
1754         I2C_CLIENT_END
1755 };
1756
1757 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1758 {
1759         int rc = 0;
1760         struct em28xx *dev = ptr;
1761
1762         if (dev->tuner_type != TUNER_XC2028)
1763                 return 0;
1764
1765         if (command != XC2028_TUNER_RESET)
1766                 return 0;
1767
1768         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1769
1770         return rc;
1771 }
1772 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1773
1774 static inline void em28xx_set_model(struct em28xx *dev)
1775 {
1776         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1777
1778         /* Those are the default values for the majority of boards
1779            Use those values if not specified otherwise at boards entry
1780          */
1781         if (!dev->board.xclk)
1782                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1783                                   EM28XX_XCLK_FREQUENCY_12MHZ;
1784
1785         if (!dev->board.i2c_speed)
1786                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1787                                        EM28XX_I2C_FREQ_100_KHZ;
1788 }
1789
1790
1791 /* FIXME: Should be replaced by a proper mt9m111 driver */
1792 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1793 {
1794         int i;
1795         unsigned char regs[][3] = {
1796                 { 0x0d, 0x00, 0x01, },  /* reset and use defaults */
1797                 { 0x0d, 0x00, 0x00, },
1798                 { 0x0a, 0x00, 0x21, },
1799                 { 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
1800         };
1801
1802         for (i = 0; i < ARRAY_SIZE(regs); i++)
1803                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1804
1805         return 0;
1806 }
1807
1808
1809 /* FIXME: Should be replaced by a proper mt9m001 driver */
1810 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1811 {
1812         int i;
1813         unsigned char regs[][3] = {
1814                 { 0x0d, 0x00, 0x01, },
1815                 { 0x0d, 0x00, 0x00, },
1816                 { 0x04, 0x05, 0x00, },  /* hres = 1280 */
1817                 { 0x03, 0x04, 0x00, },  /* vres = 1024 */
1818                 { 0x20, 0x11, 0x00, },
1819                 { 0x06, 0x00, 0x10, },
1820                 { 0x2b, 0x00, 0x24, },
1821                 { 0x2e, 0x00, 0x24, },
1822                 { 0x35, 0x00, 0x24, },
1823                 { 0x2d, 0x00, 0x20, },
1824                 { 0x2c, 0x00, 0x20, },
1825                 { 0x09, 0x0a, 0xd4, },
1826                 { 0x35, 0x00, 0x57, },
1827         };
1828
1829         for (i = 0; i < ARRAY_SIZE(regs); i++)
1830                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1831
1832         return 0;
1833 }
1834
1835 /* HINT method: webcam I2C chips
1836  *
1837  * This method works for webcams with Micron sensors
1838  */
1839 static int em28xx_hint_sensor(struct em28xx *dev)
1840 {
1841         int rc;
1842         char *sensor_name;
1843         unsigned char cmd;
1844         __be16 version_be;
1845         u16 version;
1846
1847         /* Micron sensor detection */
1848         dev->i2c_client.addr = 0xba >> 1;
1849         cmd = 0;
1850         i2c_master_send(&dev->i2c_client, &cmd, 1);
1851         rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
1852         if (rc != 2)
1853                 return -EINVAL;
1854
1855         version = be16_to_cpu(version_be);
1856         switch (version) {
1857         case 0x8232:            /* mt9v011 640x480 1.3 Mpix sensor */
1858         case 0x8243:            /* mt9v011 rev B 640x480 1.3 Mpix sensor */
1859                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
1860                 em28xx_set_model(dev);
1861
1862                 sensor_name = "mt9v011";
1863                 dev->em28xx_sensor = EM28XX_MT9V011;
1864                 dev->sensor_xres = 640;
1865                 dev->sensor_yres = 480;
1866                 /*
1867                  * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
1868                  * the Silvercrest cam I have here for testing - for higher
1869                  * resolutions, a high clock cause horizontal artifacts, so we
1870                  * need to use a lower xclk frequency.
1871                  * Yet, it would be possible to adjust xclk depending on the
1872                  * desired resolution, since this affects directly the
1873                  * frame rate.
1874                  */
1875                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
1876                 dev->sensor_xtal = 4300000;
1877
1878                 /* probably means GRGB 16 bit bayer */
1879                 dev->vinmode = 0x0d;
1880                 dev->vinctl = 0x00;
1881
1882                 break;
1883
1884         case 0x143a:    /* MT9M111 as found in the ECS G200 */
1885                 dev->model = EM2750_BOARD_UNKNOWN;
1886                 em28xx_set_model(dev);
1887
1888                 sensor_name = "mt9m111";
1889                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
1890                 dev->em28xx_sensor = EM28XX_MT9M111;
1891                 em28xx_initialize_mt9m111(dev);
1892                 dev->sensor_xres = 640;
1893                 dev->sensor_yres = 512;
1894
1895                 dev->vinmode = 0x0a;
1896                 dev->vinctl = 0x00;
1897
1898                 break;
1899
1900         case 0x8431:
1901                 dev->model = EM2750_BOARD_UNKNOWN;
1902                 em28xx_set_model(dev);
1903
1904                 sensor_name = "mt9m001";
1905                 dev->em28xx_sensor = EM28XX_MT9M001;
1906                 em28xx_initialize_mt9m001(dev);
1907                 dev->sensor_xres = 1280;
1908                 dev->sensor_yres = 1024;
1909
1910                 /* probably means BGGR 16 bit bayer */
1911                 dev->vinmode = 0x0c;
1912                 dev->vinctl = 0x00;
1913
1914                 break;
1915         default:
1916                 printk("Unknown Micron Sensor 0x%04x\n", version);
1917                 return -EINVAL;
1918         }
1919
1920         /* Setup webcam defaults */
1921         em28xx_pre_card_setup(dev);
1922
1923         em28xx_errdev("Sensor is %s, using model %s entry.\n",
1924                       sensor_name, em28xx_boards[dev->model].name);
1925
1926         return 0;
1927 }
1928
1929 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1930  * this won't work for boards with generic PCI IDs
1931  */
1932 void em28xx_pre_card_setup(struct em28xx *dev)
1933 {
1934         /* Set the initial XCLK and I2C clock values based on the board
1935            definition */
1936         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1937         em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1938         msleep(50);
1939
1940         /* request some modules */
1941         switch (dev->model) {
1942         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1943                 /* Sets the msp34xx I2S speed */
1944                 dev->i2s_speed = 2048000;
1945                 break;
1946         case EM2861_BOARD_KWORLD_PVRTV_300U:
1947         case EM2880_BOARD_KWORLD_DVB_305U:
1948                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1949                 msleep(10);
1950                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1951                 msleep(10);
1952                 break;
1953         case EM2870_BOARD_COMPRO_VIDEOMATE:
1954                 /* TODO: someone can do some cleanup here...
1955                          not everything's needed */
1956                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1957                 msleep(10);
1958                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1959                 msleep(10);
1960                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1961                 mdelay(70);
1962                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1963                 mdelay(70);
1964                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1965                 mdelay(70);
1966                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1967                 mdelay(70);
1968                 break;
1969         case EM2870_BOARD_TERRATEC_XS_MT2060:
1970                 /* this device needs some gpio writes to get the DVB-T
1971                    demod work */
1972                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1973                 mdelay(70);
1974                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1975                 mdelay(70);
1976                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1977                 mdelay(70);
1978                 break;
1979         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1980                 /* this device needs some gpio writes to get the
1981                    DVB-T demod work */
1982                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1983                 mdelay(70);
1984                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1985                 mdelay(70);
1986                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1987                 mdelay(70);
1988                 break;
1989         case EM2820_BOARD_GADMEI_UTV310:
1990         case EM2820_BOARD_MSI_VOX_USB_2:
1991                 /* enables audio for that devices */
1992                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1993                 break;
1994
1995         case EM2882_BOARD_KWORLD_ATSC_315U:
1996                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1997                 msleep(10);
1998                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1999                 msleep(10);
2000                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2001                 msleep(10);
2002                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2003                 msleep(10);
2004                 break;
2005
2006         case EM2860_BOARD_KAIOMY_TVNPC_U2:
2007                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2008                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2009                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2010                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2011                 msleep(10);
2012                 em28xx_write_regs(dev, 0x08, "\xff", 1);
2013                 msleep(10);
2014                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2015                 msleep(10);
2016                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2017
2018                 break;
2019         case EM2860_BOARD_EASYCAP:
2020                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2021                 break;
2022
2023         case EM2820_BOARD_IODATA_GVMVP_SZ:
2024                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2025                 msleep(70);
2026                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2027                 msleep(10);
2028                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2029                 msleep(70);
2030                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2031                 msleep(70);
2032                 break;
2033         }
2034
2035         em28xx_gpio_set(dev, dev->board.tuner_gpio);
2036         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2037
2038         /* Unlock device */
2039         em28xx_set_mode(dev, EM28XX_SUSPEND);
2040 }
2041
2042 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2043 {
2044         memset(ctl, 0, sizeof(*ctl));
2045
2046         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
2047         ctl->max_len = 64;
2048         ctl->mts = em28xx_boards[dev->model].mts_firmware;
2049
2050         switch (dev->model) {
2051         case EM2880_BOARD_EMPIRE_DUAL_TV:
2052         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2053                 ctl->demod = XC3028_FE_ZARLINK456;
2054                 break;
2055         case EM2880_BOARD_TERRATEC_HYBRID_XS:
2056         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2057                 ctl->demod = XC3028_FE_ZARLINK456;
2058                 break;
2059         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2060                 /* djh - Not sure which demod we need here */
2061                 ctl->demod = XC3028_FE_DEFAULT;
2062                 break;
2063         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2064                 ctl->demod = XC3028_FE_DEFAULT;
2065                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2066                 break;
2067         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2068         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2069         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2070                 /* FIXME: Better to specify the needed IF */
2071                 ctl->demod = XC3028_FE_DEFAULT;
2072                 break;
2073         case EM2883_BOARD_KWORLD_HYBRID_330U:
2074                 ctl->demod = XC3028_FE_CHINA;
2075                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2076                 break;
2077         case EM2882_BOARD_EVGA_INDTUBE:
2078                 ctl->demod = XC3028_FE_CHINA;
2079                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2080                 break;
2081         default:
2082                 ctl->demod = XC3028_FE_OREN538;
2083         }
2084 }
2085
2086 static void em28xx_tuner_setup(struct em28xx *dev)
2087 {
2088         struct tuner_setup           tun_setup;
2089         struct v4l2_frequency        f;
2090
2091         if (dev->tuner_type == TUNER_ABSENT)
2092                 return;
2093
2094         memset(&tun_setup, 0, sizeof(tun_setup));
2095
2096         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2097         tun_setup.tuner_callback = em28xx_tuner_callback;
2098
2099         if (dev->board.radio.type) {
2100                 tun_setup.type = dev->board.radio.type;
2101                 tun_setup.addr = dev->board.radio_addr;
2102
2103                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2104         }
2105
2106         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2107                 tun_setup.type   = dev->tuner_type;
2108                 tun_setup.addr   = dev->tuner_addr;
2109
2110                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2111         }
2112
2113         if (dev->tda9887_conf) {
2114                 struct v4l2_priv_tun_config tda9887_cfg;
2115
2116                 tda9887_cfg.tuner = TUNER_TDA9887;
2117                 tda9887_cfg.priv = &dev->tda9887_conf;
2118
2119                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2120         }
2121
2122         if (dev->tuner_type == TUNER_XC2028) {
2123                 struct v4l2_priv_tun_config  xc2028_cfg;
2124                 struct xc2028_ctrl           ctl;
2125
2126                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2127                 memset(&ctl, 0, sizeof(ctl));
2128
2129                 em28xx_setup_xc3028(dev, &ctl);
2130
2131                 xc2028_cfg.tuner = TUNER_XC2028;
2132                 xc2028_cfg.priv  = &ctl;
2133
2134                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2135         }
2136
2137         /* configure tuner */
2138         f.tuner = 0;
2139         f.type = V4L2_TUNER_ANALOG_TV;
2140         f.frequency = 9076;     /* just a magic number */
2141         dev->ctl_freq = f.frequency;
2142         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2143 }
2144
2145 static int em28xx_hint_board(struct em28xx *dev)
2146 {
2147         int i;
2148
2149         /* HINT method: EEPROM
2150          *
2151          * This method works only for boards with eeprom.
2152          * Uses a hash of all eeprom bytes. The hash should be
2153          * unique for a vendor/tuner pair.
2154          * There are a high chance that tuners for different
2155          * video standards produce different hashes.
2156          */
2157         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2158                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2159                         dev->model = em28xx_eeprom_hash[i].model;
2160                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2161
2162                         em28xx_errdev("Your board has no unique USB ID.\n");
2163                         em28xx_errdev("A hint were successfully done, "
2164                                       "based on eeprom hash.\n");
2165                         em28xx_errdev("This method is not 100%% failproof.\n");
2166                         em28xx_errdev("If the board were missdetected, "
2167                                       "please email this log to:\n");
2168                         em28xx_errdev("\tV4L Mailing List "
2169                                       " <linux-media@vger.kernel.org>\n");
2170                         em28xx_errdev("Board detected as %s\n",
2171                                       em28xx_boards[dev->model].name);
2172
2173                         return 0;
2174                 }
2175         }
2176
2177         /* HINT method: I2C attached devices
2178          *
2179          * This method works for all boards.
2180          * Uses a hash of i2c scanned devices.
2181          * Devices with the same i2c attached chips will
2182          * be considered equal.
2183          * This method is less precise than the eeprom one.
2184          */
2185
2186         /* user did not request i2c scanning => do it now */
2187         if (!dev->i2c_hash)
2188                 em28xx_do_i2c_scan(dev);
2189
2190         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2191                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2192                         dev->model = em28xx_i2c_hash[i].model;
2193                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
2194                         em28xx_errdev("Your board has no unique USB ID.\n");
2195                         em28xx_errdev("A hint were successfully done, "
2196                                       "based on i2c devicelist hash.\n");
2197                         em28xx_errdev("This method is not 100%% failproof.\n");
2198                         em28xx_errdev("If the board were missdetected, "
2199                                       "please email this log to:\n");
2200                         em28xx_errdev("\tV4L Mailing List "
2201                                       " <linux-media@vger.kernel.org>\n");
2202                         em28xx_errdev("Board detected as %s\n",
2203                                       em28xx_boards[dev->model].name);
2204
2205                         return 0;
2206                 }
2207         }
2208
2209         em28xx_errdev("Your board has no unique USB ID and thus need a "
2210                       "hint to be detected.\n");
2211         em28xx_errdev("You may try to use card=<n> insmod option to "
2212                       "workaround that.\n");
2213         em28xx_errdev("Please send an email with this log to:\n");
2214         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2215         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2216         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2217
2218         em28xx_errdev("Here is a list of valid choices for the card=<n>"
2219                       " insmod option:\n");
2220         for (i = 0; i < em28xx_bcount; i++) {
2221                 em28xx_errdev("    card=%d -> %s\n",
2222                                 i, em28xx_boards[i].name);
2223         }
2224         return -1;
2225 }
2226
2227 /* ----------------------------------------------------------------------- */
2228 void em28xx_register_i2c_ir(struct em28xx *dev)
2229 {
2230         const unsigned short addr_list[] = {
2231                  0x30, 0x47, I2C_CLIENT_END
2232         };
2233
2234         if (disable_ir)
2235                 return;
2236
2237         memset(&dev->info, 0, sizeof(&dev->info));
2238         memset(&dev->init_data, 0, sizeof(dev->init_data));
2239         strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);
2240
2241         /* detect & configure */
2242         switch (dev->model) {
2243         case EM2800_BOARD_TERRATEC_CINERGY_200:
2244         case EM2820_BOARD_TERRATEC_CINERGY_250:
2245                 dev->init_data.ir_codes = &ir_codes_em_terratec_table;
2246                 dev->init_data.get_key = em28xx_get_key_terratec;
2247                 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2248                 break;
2249         case EM2820_BOARD_PINNACLE_USB_2:
2250                 dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
2251                 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2252                 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2253                 break;
2254         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2255                 dev->init_data.ir_codes = &ir_codes_hauppauge_new_table;
2256                 dev->init_data.get_key = em28xx_get_key_em_haup;
2257                 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2258                 break;
2259         }
2260
2261         if (dev->init_data.name)
2262                 dev->info.platform_data = &dev->init_data;
2263         i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
2264 }
2265
2266 void em28xx_card_setup(struct em28xx *dev)
2267 {
2268         /*
2269          * If the device can be a webcam, seek for a sensor.
2270          * If sensor is not found, then it isn't a webcam.
2271          */
2272         if (dev->board.is_webcam) {
2273                 if (em28xx_hint_sensor(dev) < 0)
2274                         dev->board.is_webcam = 0;
2275                 else
2276                         dev->progressive = 1;
2277         } else
2278                 em28xx_set_model(dev);
2279
2280         em28xx_info("Identified as %s (card=%d)\n",
2281                     dev->board.name, dev->model);
2282
2283         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2284         if (em28xx_boards[dev->model].tuner_addr)
2285                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2286
2287         if (em28xx_boards[dev->model].tda9887_conf)
2288                 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2289
2290         /* request some modules */
2291         switch (dev->model) {
2292         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2293         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2294         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2295         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2296         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2297         {
2298                 struct tveeprom tv;
2299 #if defined(CONFIG_MODULES) && defined(MODULE)
2300                 request_module("tveeprom");
2301 #endif
2302                 /* Call first TVeeprom */
2303
2304                 dev->i2c_client.addr = 0xa0 >> 1;
2305                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2306
2307                 dev->tuner_type = tv.tuner_type;
2308
2309                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2310                         dev->i2s_speed = 2048000;
2311                         dev->board.has_msp34xx = 1;
2312                 }
2313                 break;
2314         }
2315         case EM2882_BOARD_KWORLD_ATSC_315U:
2316                 em28xx_write_reg(dev, 0x0d, 0x42);
2317                 msleep(10);
2318                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2319                 msleep(10);
2320                 break;
2321         case EM2820_BOARD_KWORLD_PVRTV2800RF:
2322                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2323                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2324                 break;
2325         case EM2820_BOARD_UNKNOWN:
2326         case EM2800_BOARD_UNKNOWN:
2327                 /*
2328                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2329                  *
2330                  * This occurs because they share identical USB vendor and
2331                  * product IDs.
2332                  *
2333                  * What we do here is look up the EEPROM hash of the K-WORLD
2334                  * and if it is found then we decide that we do not have
2335                  * a DIGIVOX and reset the device to the K-WORLD instead.
2336                  *
2337                  * This solution is only valid if they do not share eeprom
2338                  * hash identities which has not been determined as yet.
2339                  */
2340         case EM2880_BOARD_MSI_DIGIVOX_AD:
2341                 if (!em28xx_hint_board(dev))
2342                         em28xx_set_model(dev);
2343
2344                 /* In cases where we had to use a board hint, the call to
2345                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2346                    so make the call now so the analog GPIOs are set properly
2347                    before probing the i2c bus. */
2348                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2349                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2350                 break;
2351         }
2352
2353 #if defined(CONFIG_MODULES) && defined(MODULE)
2354         if (dev->board.has_ir_i2c && !disable_ir)
2355                 request_module("ir-kbd-i2c");
2356 #endif
2357         if (dev->board.has_snapshot_button)
2358                 em28xx_register_snapshot_button(dev);
2359
2360         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2361                 em28xx_errdev("\n\n");
2362                 em28xx_errdev("The support for this board weren't "
2363                               "valid yet.\n");
2364                 em28xx_errdev("Please send a report of having this working\n");
2365                 em28xx_errdev("not to V4L mailing list (and/or to other "
2366                                 "addresses)\n\n");
2367         }
2368
2369         /* Allow override tuner type by a module parameter */
2370         if (tuner >= 0)
2371                 dev->tuner_type = tuner;
2372
2373         /* request some modules */
2374         if (dev->board.has_msp34xx)
2375                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2376                         "msp3400", "msp3400", 0, msp3400_addrs);
2377
2378         if (dev->board.decoder == EM28XX_SAA711X)
2379                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2380                         "saa7115", "saa7115_auto", 0, saa711x_addrs);
2381
2382         if (dev->board.decoder == EM28XX_TVP5150)
2383                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2384                         "tvp5150", "tvp5150", 0, tvp5150_addrs);
2385
2386         if (dev->em28xx_sensor == EM28XX_MT9V011) {
2387                 struct v4l2_subdev *sd;
2388
2389                 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2390                          &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
2391                 v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
2392         }
2393
2394
2395         if (dev->board.adecoder == EM28XX_TVAUDIO)
2396                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2397                         "tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
2398
2399         if (dev->board.tuner_type != TUNER_ABSENT) {
2400                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2401
2402                 if (dev->board.radio.type)
2403                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2404                                 "tuner", "tuner", dev->board.radio_addr, NULL);
2405
2406                 if (has_demod)
2407                         v4l2_i2c_new_subdev(&dev->v4l2_dev,
2408                                 &dev->i2c_adap, "tuner", "tuner",
2409                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2410                 if (dev->tuner_addr == 0) {
2411                         enum v4l2_i2c_tuner_type type =
2412                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2413                         struct v4l2_subdev *sd;
2414
2415                         sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2416                                 &dev->i2c_adap, "tuner", "tuner",
2417                                 0, v4l2_i2c_tuner_addrs(type));
2418
2419                         if (sd)
2420                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2421                 } else {
2422                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2423                                 "tuner", "tuner", dev->tuner_addr, NULL);
2424                 }
2425         }
2426
2427         em28xx_tuner_setup(dev);
2428
2429         if(!disable_ir)
2430                 em28xx_ir_init(dev);
2431 }
2432
2433
2434 #if defined(CONFIG_MODULES) && defined(MODULE)
2435 static void request_module_async(struct work_struct *work)
2436 {
2437         struct em28xx *dev = container_of(work,
2438                              struct em28xx, request_module_wk);
2439
2440         if (dev->has_audio_class)
2441                 request_module("snd-usb-audio");
2442         else if (dev->has_alsa_audio)
2443                 request_module("em28xx-alsa");
2444
2445         if (dev->board.has_dvb)
2446                 request_module("em28xx-dvb");
2447 }
2448
2449 static void request_modules(struct em28xx *dev)
2450 {
2451         INIT_WORK(&dev->request_module_wk, request_module_async);
2452         schedule_work(&dev->request_module_wk);
2453 }
2454 #else
2455 #define request_modules(dev)
2456 #endif /* CONFIG_MODULES */
2457
2458 /*
2459  * em28xx_realease_resources()
2460  * unregisters the v4l2,i2c and usb devices
2461  * called when the device gets disconected or at module unload
2462 */
2463 void em28xx_release_resources(struct em28xx *dev)
2464 {
2465         if (dev->sbutton_input_dev)
2466                 em28xx_deregister_snapshot_button(dev);
2467
2468         if (dev->ir)
2469                 em28xx_ir_fini(dev);
2470
2471         /*FIXME: I2C IR should be disconnected */
2472
2473         em28xx_release_analog_resources(dev);
2474
2475         em28xx_remove_from_devlist(dev);
2476
2477         em28xx_i2c_unregister(dev);
2478
2479         v4l2_device_unregister(&dev->v4l2_dev);
2480
2481         usb_put_dev(dev->udev);
2482
2483         /* Mark device as unused */
2484         em28xx_devused &= ~(1 << dev->devno);
2485 };
2486
2487 /*
2488  * em28xx_init_dev()
2489  * allocates and inits the device structs, registers i2c bus and v4l device
2490  */
2491 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2492                            struct usb_interface *interface,
2493                            int minor)
2494 {
2495         struct em28xx *dev = *devhandle;
2496         int retval;
2497         int errCode;
2498
2499         dev->udev = udev;
2500         mutex_init(&dev->ctrl_urb_lock);
2501         spin_lock_init(&dev->slock);
2502         init_waitqueue_head(&dev->open);
2503         init_waitqueue_head(&dev->wait_frame);
2504         init_waitqueue_head(&dev->wait_stream);
2505
2506         dev->em28xx_write_regs = em28xx_write_regs;
2507         dev->em28xx_read_reg = em28xx_read_reg;
2508         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2509         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2510         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2511         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2512
2513         em28xx_set_model(dev);
2514
2515         /* Set the default GPO/GPIO for legacy devices */
2516         dev->reg_gpo_num = EM2880_R04_GPO;
2517         dev->reg_gpio_num = EM28XX_R08_GPIO;
2518
2519         dev->wait_after_write = 5;
2520
2521         /* Based on the Chip ID, set the device configuration */
2522         retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2523         if (retval > 0) {
2524                 dev->chip_id = retval;
2525
2526                 switch (dev->chip_id) {
2527                 case CHIP_ID_EM2710:
2528                         em28xx_info("chip ID is em2710\n");
2529                         break;
2530                 case CHIP_ID_EM2750:
2531                         em28xx_info("chip ID is em2750\n");
2532                         break;
2533                 case CHIP_ID_EM2820:
2534                         em28xx_info("chip ID is em2820 (or em2710)\n");
2535                         break;
2536                 case CHIP_ID_EM2840:
2537                         em28xx_info("chip ID is em2840\n");
2538                         break;
2539                 case CHIP_ID_EM2860:
2540                         em28xx_info("chip ID is em2860\n");
2541                         break;
2542                 case CHIP_ID_EM2870:
2543                         em28xx_info("chip ID is em2870\n");
2544                         dev->wait_after_write = 0;
2545                         break;
2546                 case CHIP_ID_EM2874:
2547                         em28xx_info("chip ID is em2874\n");
2548                         dev->reg_gpio_num = EM2874_R80_GPIO;
2549                         dev->wait_after_write = 0;
2550                         break;
2551                 case CHIP_ID_EM2883:
2552                         em28xx_info("chip ID is em2882/em2883\n");
2553                         dev->wait_after_write = 0;
2554                         break;
2555                 default:
2556                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2557                 }
2558         }
2559
2560         /* Prepopulate cached GPO register content */
2561         retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2562         if (retval >= 0)
2563                 dev->reg_gpo = retval;
2564
2565         em28xx_pre_card_setup(dev);
2566
2567         if (!dev->board.is_em2800) {
2568                 /* Sets I2C speed to 100 KHz */
2569                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2570                 if (retval < 0) {
2571                         em28xx_errdev("%s: em28xx_write_regs_req failed!"
2572                                       " retval [%d]\n",
2573                                       __func__, retval);
2574                         return retval;
2575                 }
2576         }
2577
2578         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2579         if (retval < 0) {
2580                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2581                 return retval;
2582         }
2583
2584         /* register i2c bus */
2585         errCode = em28xx_i2c_register(dev);
2586         if (errCode < 0) {
2587                 v4l2_device_unregister(&dev->v4l2_dev);
2588                 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2589                         __func__, errCode);
2590                 return errCode;
2591         }
2592
2593         /*
2594          * Default format, used for tvp5150 or saa711x output formats
2595          */
2596         dev->vinmode = 0x10;
2597         dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
2598                        EM28XX_VINCTRL_CCIR656_ENABLE;
2599
2600         /* Do board specific init and eeprom reading */
2601         em28xx_card_setup(dev);
2602
2603         /* Configure audio */
2604         errCode = em28xx_audio_setup(dev);
2605         if (errCode < 0) {
2606                 v4l2_device_unregister(&dev->v4l2_dev);
2607                 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2608                         __func__, errCode);
2609         }
2610
2611         /* wake i2c devices */
2612         em28xx_wake_i2c(dev);
2613
2614         /* init video dma queues */
2615         INIT_LIST_HEAD(&dev->vidq.active);
2616         INIT_LIST_HEAD(&dev->vidq.queued);
2617         INIT_LIST_HEAD(&dev->vbiq.active);
2618         INIT_LIST_HEAD(&dev->vbiq.queued);
2619
2620
2621         if (dev->board.has_msp34xx) {
2622                 /* Send a reset to other chips via gpio */
2623                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2624                 if (errCode < 0) {
2625                         em28xx_errdev("%s: em28xx_write_regs_req - "
2626                                       "msp34xx(1) failed! errCode [%d]\n",
2627                                       __func__, errCode);
2628                         return errCode;
2629                 }
2630                 msleep(3);
2631
2632                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2633                 if (errCode < 0) {
2634                         em28xx_errdev("%s: em28xx_write_regs_req - "
2635                                       "msp34xx(2) failed! errCode [%d]\n",
2636                                       __func__, errCode);
2637                         return errCode;
2638                 }
2639                 msleep(3);
2640         }
2641
2642         em28xx_add_into_devlist(dev);
2643
2644         retval = em28xx_register_analog_devices(dev);
2645         if (retval < 0) {
2646                 em28xx_release_resources(dev);
2647                 goto fail_reg_devices;
2648         }
2649
2650         em28xx_init_extension(dev);
2651
2652         /* Save some power by putting tuner to sleep */
2653         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2654
2655         return 0;
2656
2657 fail_reg_devices:
2658         return retval;
2659 }
2660
2661 /*
2662  * em28xx_usb_probe()
2663  * checks for supported devices
2664  */
2665 static int em28xx_usb_probe(struct usb_interface *interface,
2666                             const struct usb_device_id *id)
2667 {
2668         const struct usb_endpoint_descriptor *endpoint;
2669         struct usb_device *udev;
2670         struct usb_interface *uif;
2671         struct em28xx *dev = NULL;
2672         int retval;
2673         int i, nr, ifnum, isoc_pipe;
2674         char *speed;
2675         char descr[255] = "";
2676
2677         udev = usb_get_dev(interface_to_usbdev(interface));
2678         ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2679
2680         /* Check to see next free device and mark as used */
2681         nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2682         em28xx_devused |= 1<<nr;
2683
2684         /* Don't register audio interfaces */
2685         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2686                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2687                         "interface %i, class %i\n",
2688                         le16_to_cpu(udev->descriptor.idVendor),
2689                         le16_to_cpu(udev->descriptor.idProduct),
2690                         ifnum,
2691                         interface->altsetting[0].desc.bInterfaceClass);
2692
2693                 em28xx_devused &= ~(1<<nr);
2694                 retval = -ENODEV;
2695                 goto err;
2696         }
2697
2698         endpoint = &interface->cur_altsetting->endpoint[0].desc;
2699
2700         /* check if the device has the iso in endpoint at the correct place */
2701         if (usb_endpoint_xfer_isoc(endpoint)
2702             &&
2703             (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2704                 /* It's a newer em2874/em2875 device */
2705                 isoc_pipe = 0;
2706         } else {
2707                 int check_interface = 1;
2708                 isoc_pipe = 1;
2709                 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2710                 if (!usb_endpoint_xfer_isoc(endpoint))
2711                         check_interface = 0;
2712
2713                 if (usb_endpoint_dir_out(endpoint))
2714                         check_interface = 0;
2715
2716                 if (!check_interface) {
2717                         em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2718                                 "interface %i, class %i found.\n",
2719                                 le16_to_cpu(udev->descriptor.idVendor),
2720                                 le16_to_cpu(udev->descriptor.idProduct),
2721                                 ifnum,
2722                                 interface->altsetting[0].desc.bInterfaceClass);
2723
2724                         em28xx_err(DRIVER_NAME " This is an anciliary "
2725                                 "interface not used by the driver\n");
2726
2727                         em28xx_devused &= ~(1<<nr);
2728                         retval = -ENODEV;
2729                         goto err;
2730                 }
2731         }
2732
2733         switch (udev->speed) {
2734         case USB_SPEED_LOW:
2735                 speed = "1.5";
2736                 break;
2737         case USB_SPEED_UNKNOWN:
2738         case USB_SPEED_FULL:
2739                 speed = "12";
2740                 break;
2741         case USB_SPEED_HIGH:
2742                 speed = "480";
2743                 break;
2744         default:
2745                 speed = "unknown";
2746         }
2747
2748         if (udev->manufacturer)
2749                 strlcpy(descr, udev->manufacturer, sizeof(descr));
2750
2751         if (udev->product) {
2752                 if (*descr)
2753                         strlcat(descr, " ", sizeof(descr));
2754                 strlcat(descr, udev->product, sizeof(descr));
2755         }
2756         if (*descr)
2757                 strlcat(descr, " ", sizeof(descr));
2758
2759         printk(DRIVER_NAME ": New device %s@ %s Mbps "
2760                 "(%04x:%04x, interface %d, class %d)\n",
2761                 descr,
2762                 speed,
2763                 le16_to_cpu(udev->descriptor.idVendor),
2764                 le16_to_cpu(udev->descriptor.idProduct),
2765                 ifnum,
2766                 interface->altsetting->desc.bInterfaceNumber);
2767
2768         /*
2769          * Make sure we have 480 Mbps of bandwidth, otherwise things like
2770          * video stream wouldn't likely work, since 12 Mbps is generally
2771          * not enough even for most Digital TV streams.
2772          */
2773         if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2774                 printk(DRIVER_NAME ": Device initialization failed.\n");
2775                 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2776                        " USB 2.0 port.\n");
2777                 em28xx_devused &= ~(1<<nr);
2778                 retval = -ENODEV;
2779                 goto err;
2780         }
2781
2782         if (nr >= EM28XX_MAXBOARDS) {
2783                 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2784                                 EM28XX_MAXBOARDS);
2785                 em28xx_devused &= ~(1<<nr);
2786                 retval = -ENOMEM;
2787                 goto err;
2788         }
2789
2790         /* allocate memory for our device state and initialize it */
2791         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2792         if (dev == NULL) {
2793                 em28xx_err(DRIVER_NAME ": out of memory!\n");
2794                 em28xx_devused &= ~(1<<nr);
2795                 retval = -ENOMEM;
2796                 goto err;
2797         }
2798
2799         snprintf(dev->name, 29, "em28xx #%d", nr);
2800         dev->devno = nr;
2801         dev->model = id->driver_info;
2802         dev->alt   = -1;
2803
2804         /* Checks if audio is provided by some interface */
2805         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2806                 uif = udev->config->interface[i];
2807                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2808                         dev->has_audio_class = 1;
2809                         break;
2810                 }
2811         }
2812
2813         /* compute alternate max packet sizes */
2814         uif = udev->actconfig->interface[0];
2815
2816         dev->num_alt = uif->num_altsetting;
2817         dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2818
2819         if (dev->alt_max_pkt_size == NULL) {
2820                 em28xx_errdev("out of memory!\n");
2821                 em28xx_devused &= ~(1<<nr);
2822                 kfree(dev);
2823                 retval = -ENOMEM;
2824                 goto err;
2825         }
2826
2827         for (i = 0; i < dev->num_alt ; i++) {
2828                 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2829                 dev->alt_max_pkt_size[i] =
2830                     (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2831         }
2832
2833         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2834                 dev->model = card[nr];
2835
2836         /* allocate device struct */
2837         mutex_init(&dev->lock);
2838         mutex_lock(&dev->lock);
2839         retval = em28xx_init_dev(&dev, udev, interface, nr);
2840         if (retval) {
2841                 em28xx_devused &= ~(1<<dev->devno);
2842                 mutex_unlock(&dev->lock);
2843                 kfree(dev);
2844                 goto err;
2845         }
2846
2847         /* save our data pointer in this interface device */
2848         usb_set_intfdata(interface, dev);
2849
2850         request_modules(dev);
2851
2852         /* Should be the last thing to do, to avoid newer udev's to
2853            open the device before fully initializing it
2854          */
2855         mutex_unlock(&dev->lock);
2856
2857         return 0;
2858
2859 err:
2860         return retval;
2861 }
2862
2863 /*
2864  * em28xx_usb_disconnect()
2865  * called when the device gets diconencted
2866  * video device will be unregistered on v4l2_close in case it is still open
2867  */
2868 static void em28xx_usb_disconnect(struct usb_interface *interface)
2869 {
2870         struct em28xx *dev;
2871
2872         dev = usb_get_intfdata(interface);
2873         usb_set_intfdata(interface, NULL);
2874
2875         if (!dev)
2876                 return;
2877
2878         em28xx_info("disconnecting %s\n", dev->vdev->name);
2879
2880         /* wait until all current v4l2 io is finished then deallocate
2881            resources */
2882         mutex_lock(&dev->lock);
2883
2884         wake_up_interruptible_all(&dev->open);
2885
2886         v4l2_device_disconnect(&dev->v4l2_dev);
2887
2888         if (dev->users) {
2889                 em28xx_warn
2890                     ("device /dev/video%d is open! Deregistration and memory "
2891                      "deallocation are deferred on close.\n",
2892                                 dev->vdev->num);
2893
2894                 dev->state |= DEV_MISCONFIGURED;
2895                 em28xx_uninit_isoc(dev);
2896                 dev->state |= DEV_DISCONNECTED;
2897                 wake_up_interruptible(&dev->wait_frame);
2898                 wake_up_interruptible(&dev->wait_stream);
2899         } else {
2900                 dev->state |= DEV_DISCONNECTED;
2901                 em28xx_release_resources(dev);
2902         }
2903
2904         em28xx_close_extension(dev);
2905
2906         mutex_unlock(&dev->lock);
2907
2908         if (!dev->users) {
2909                 kfree(dev->alt_max_pkt_size);
2910                 kfree(dev);
2911         }
2912 }
2913
2914 static struct usb_driver em28xx_usb_driver = {
2915         .name = "em28xx",
2916         .probe = em28xx_usb_probe,
2917         .disconnect = em28xx_usb_disconnect,
2918         .id_table = em28xx_id_table,
2919 };
2920
2921 static int __init em28xx_module_init(void)
2922 {
2923         int result;
2924
2925         /* register this driver with the USB subsystem */
2926         result = usb_register(&em28xx_usb_driver);
2927         if (result)
2928                 em28xx_err(DRIVER_NAME
2929                            " usb_register failed. Error number %d.\n", result);
2930
2931         printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2932
2933         return result;
2934 }
2935
2936 static void __exit em28xx_module_exit(void)
2937 {
2938         /* deregister this driver with the USB subsystem */
2939         usb_deregister(&em28xx_usb_driver);
2940 }
2941
2942 module_init(em28xx_module_init);
2943 module_exit(em28xx_module_exit);