drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/config.h>
  29 #include <linux/delay.h>
  30 #include <linux/module.h>
  31 #include <linux/moduleparam.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37
  38 #include <asm/io.h>
  39
  40 #include "bttvp.h"
  41 #include <media/v4l2-common.h>
  42 #include <media/tvaudio.h>
  43
  44 /* fwd decl */
  45 static void boot_msp34xx(struct bttv *btv, int pin);
  46 static void boot_bt832(struct bttv *btv);
  47 static void hauppauge_eeprom(struct bttv *btv);
  48 static void avermedia_eeprom(struct bttv *btv);
  49 static void osprey_eeprom(struct bttv *btv);
  50 static void modtec_eeprom(struct bttv *btv);
  51 static void init_PXC200(struct bttv *btv);
  52 static void init_RTV24(struct bttv *btv);
  53
  54 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
  55 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
  56 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
  57                                     int set);
  58 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
  59                                       int set);
  60 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
  61 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
  62 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
  63 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
  64 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
  65 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
  66 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
  67 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
  68 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  69 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  70 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  71 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  72 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  75
  76 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  77 static void picolo_tetra_init(struct bttv *btv);
  78
  79 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  80 static void tibetCS16_init(struct bttv *btv);
  81
  82 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  83 static void kodicom4400r_init(struct bttv *btv);
  84
  85 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  86 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  87
  88 static int terratec_active_radio_upgrade(struct bttv *btv);
  89 static int tea5757_read(struct bttv *btv);
  90 static int tea5757_write(struct bttv *btv, int value);
  91 static void identify_by_eeprom(struct bttv *btv,
  92                                unsigned char eeprom_data[256]);
  93 static int __devinit pvr_boot(struct bttv *btv);
  94
  95 /* config variables */
  96 static unsigned int triton1;
  97 static unsigned int vsfx;
  98 static unsigned int latency = UNSET;
  99 int no_overlay=-1;
 100
 101 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 104 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 105 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 106 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 107 #ifdef MODULE
 108 static unsigned int autoload = 1;
 109 #else
 110 static unsigned int autoload;
 111 #endif
 112 static unsigned int gpiomask = UNSET;
 113 static unsigned int audioall = UNSET;
 114 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 115
 116 /* insmod options */
 117 module_param(triton1,    int, 0444);
 118 module_param(vsfx,       int, 0444);
 119 module_param(no_overlay, int, 0444);
 120 module_param(latency,    int, 0444);
 121 module_param(gpiomask,   int, 0444);
 122 module_param(audioall,   int, 0444);
 123 module_param(autoload,   int, 0444);
 124
 125 module_param_array(card,     int, NULL, 0444);
 126 module_param_array(pll,      int, NULL, 0444);
 127 module_param_array(tuner,    int, NULL, 0444);
 128 module_param_array(svhs,     int, NULL, 0444);
 129 module_param_array(remote,   int, NULL, 0444);
 130 module_param_array(audiomux, int, NULL, 0444);
 131
 132 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 133                  "[enable bug compatibility for triton1 + others]");
 134 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 135                  "[yet another chipset flaw workaround]");
 136 MODULE_PARM_DESC(latency,"pci latency timer");
 137 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 138 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 139 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 140 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 141 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 142                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 143
 144 /* ----------------------------------------------------------------------- */
 145 /* list of card IDs for bt878+ cards                                       */
 146
 147 static struct CARD {
 148         unsigned id;
 149         int cardnr;
 150         char *name;
 151 } cards[] __devinitdata = {
 152         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 153         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 154         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 155         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 156         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 157         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 158         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 159         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 160         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 161
 162         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 163         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 164
 165         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 166         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 167         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 168         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 169         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 170         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 171         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 172         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 173         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 174
 175         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 176         /* some cards ship with byteswapped IDs ... */
 177         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 178         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 179         /* this seems to happen as well ... */
 180         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 181
 182         { 0x3000121a, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 183         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 184         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 185
 186         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 187         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 188         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 189         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 190         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 191         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 192         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 193
 194         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 195         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 196         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 197         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 198         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 199
 200         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 201         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 202         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 203         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 204
 205         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 206         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 207         /* clashes with FlyVideo
 208          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 209         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 210         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 211         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 212         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 213
 214         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 215         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 216         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 217         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 218         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 219
 220         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 221         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 222         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 223         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 224         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 225
 226         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 227         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 228         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 229         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 230
 231         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 232         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 233         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 234         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 235
 236         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 237         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 238         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 239         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 240         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 242         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 243         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 244         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 245         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 261
 262         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 263         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 264
 265         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 266         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 267         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 268         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 269         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 270         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 271
 272         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 273         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 274
 275         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 276         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 277         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 278         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 279         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 280         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 281         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 282         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 283         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 284
 285         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 286         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 287
 288         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 289         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 290         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 291         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 292
 293         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 294
 295         /* likely broken, vendor id doesn't match the other magic views ...
 296          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 297
 298         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 299         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 300
 301         /* DVB cards (using pci function .1 for mpeg data xfer) */
 302         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 303         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 304         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 305         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 306         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 307         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 308         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 309         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 310         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 311         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 312
 313         { 0, -1, NULL }
 314 };
 315
 316 /* ----------------------------------------------------------------------- */
 317 /* array with description for bt848 / bt878 tv/grabber cards               */
 318
 319 struct tvcard bttv_tvcards[] = {
 320         /* ---- card 0x00 ---------------------------------- */
 321         [BTTV_BOARD_UNKNOWN] = {
 322                 .name           = " *** UNKNOWN/GENERIC *** ",
 323                 .video_inputs   = 4,
 324                 .audio_inputs   = 1,
 325                 .tuner          = 0,
 326                 .svhs           = 2,
 327                 .muxsel         = { 2, 3, 1, 0 },
 328                 .tuner_type     = -1,
 329                 .tuner_addr     = ADDR_UNSET,
 330                 .radio_addr     = ADDR_UNSET,
 331         },
 332         [BTTV_BOARD_MIRO] = {
 333                 .name           = "MIRO PCTV",
 334                 .video_inputs   = 4,
 335                 .audio_inputs   = 1,
 336                 .tuner          = 0,
 337                 .svhs           = 2,
 338                 .gpiomask       = 15,
 339                 .muxsel         = { 2, 3, 1, 1 },
 340                 .gpiomux        = { 2, 0, 0, 0 },
 341                 .gpiomute       = 10,
 342                 .needs_tvaudio  = 1,
 343                 .tuner_type     = -1,
 344                 .tuner_addr     = ADDR_UNSET,
 345                 .radio_addr     = ADDR_UNSET,
 346         },
 347         [BTTV_BOARD_HAUPPAUGE] = {
 348                 .name           = "Hauppauge (bt848)",
 349                 .video_inputs   = 4,
 350                 .audio_inputs   = 1,
 351                 .tuner          = 0,
 352                 .svhs           = 2,
 353                 .gpiomask       = 7,
 354                 .muxsel         = { 2, 3, 1, 1 },
 355                 .gpiomux        = { 0, 1, 2, 3 },
 356                 .gpiomute       = 4,
 357                 .needs_tvaudio  = 1,
 358                 .tuner_type     = -1,
 359                 .tuner_addr     = ADDR_UNSET,
 360                 .radio_addr     = ADDR_UNSET,
 361         },
 362         [BTTV_BOARD_STB] = {
 363                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 364                 .video_inputs   = 3,
 365                 .audio_inputs   = 1,
 366                 .tuner          = 0,
 367                 .svhs           = 2,
 368                 .gpiomask       = 7,
 369                 .muxsel         = { 2, 3, 1, 1 },
 370                 .gpiomux        = { 4, 0, 2, 3 },
 371                 .gpiomute       = 1,
 372                 .no_msp34xx     = 1,
 373                 .needs_tvaudio  = 1,
 374                 .tuner_type     = TUNER_PHILIPS_NTSC,
 375                 .tuner_addr     = ADDR_UNSET,
 376                 .radio_addr     = ADDR_UNSET,
 377                 .pll            = PLL_28,
 378                 .has_radio      = 1,
 379         },
 380
 381         /* ---- card 0x04 ---------------------------------- */
 382         [BTTV_BOARD_INTEL] = {
 383                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 384                 .video_inputs   = 4,
 385                 .audio_inputs   = 0,
 386                 .tuner          = -1,
 387                 .svhs           = 2,
 388                 .gpiomask       = 0,
 389                 .muxsel         = { 2, 3, 1, 1 },
 390                 .gpiomux        = { 0 },
 391                 .needs_tvaudio  = 0,
 392                 .tuner_type     = 4,
 393                 .tuner_addr     = ADDR_UNSET,
 394                 .radio_addr     = ADDR_UNSET,
 395         },
 396         [BTTV_BOARD_DIAMOND] = {
 397                 .name           = "Diamond DTV2000",
 398                 .video_inputs   = 4,
 399                 .audio_inputs   = 1,
 400                 .tuner          = 0,
 401                 .svhs           = 2,
 402                 .gpiomask       = 3,
 403                 .muxsel         = { 2, 3, 1, 0 },
 404                 .gpiomux        = { 0, 1, 0, 1 },
 405                 .gpiomute       = 3,
 406                 .needs_tvaudio  = 1,
 407                 .tuner_type     = -1,
 408                 .tuner_addr     = ADDR_UNSET,
 409                 .radio_addr     = ADDR_UNSET,
 410         },
 411         [BTTV_BOARD_AVERMEDIA] = {
 412                 .name           = "AVerMedia TVPhone",
 413                 .video_inputs   = 3,
 414                 .audio_inputs   = 1,
 415                 .tuner          = 0,
 416                 .svhs           = 3,
 417                 .muxsel         = { 2, 3, 1, 1 },
 418                 .gpiomask       = 0x0f,
 419                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 420                 /*                0x04 for some cards ?? */
 421                 .needs_tvaudio  = 1,
 422                 .tuner_type     = -1,
 423                 .tuner_addr     = ADDR_UNSET,
 424                 .radio_addr     = ADDR_UNSET,
 425                 .audio_hook     = avermedia_tvphone_audio,
 426                 .has_remote     = 1,
 427         },
 428         [BTTV_BOARD_MATRIX_VISION] = {
 429                 .name           = "MATRIX-Vision MV-Delta",
 430                 .video_inputs   = 5,
 431                 .audio_inputs   = 1,
 432                 .tuner          = -1,
 433                 .svhs           = 3,
 434                 .gpiomask       = 0,
 435                 .muxsel         = { 2, 3, 1, 0, 0 },
 436                 .gpiomux        = { 0 },
 437                 .needs_tvaudio  = 1,
 438                 .tuner_type     = -1,
 439                 .tuner_addr     = ADDR_UNSET,
 440                 .radio_addr     = ADDR_UNSET,
 441         },
 442
 443         /* ---- card 0x08 ---------------------------------- */
 444         [BTTV_BOARD_FLYVIDEO] = {
 445                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 446                 .video_inputs   = 4,
 447                 .audio_inputs   = 1,
 448                 .tuner          = 0,
 449                 .svhs           = 2,
 450                 .gpiomask       = 0xc00,
 451                 .muxsel         = { 2, 3, 1, 1 },
 452                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 453                 .gpiomute       = 0xc00,
 454                 .needs_tvaudio  = 1,
 455                 .pll            = PLL_28,
 456                 .tuner_type     = -1,
 457                 .tuner_addr     = ADDR_UNSET,
 458                 .radio_addr     = ADDR_UNSET,
 459         },
 460         [BTTV_BOARD_TURBOTV] = {
 461                 .name           = "IMS/IXmicro TurboTV",
 462                 .video_inputs   = 3,
 463                 .audio_inputs   = 1,
 464                 .tuner          = 0,
 465                 .svhs           = 2,
 466                 .gpiomask       = 3,
 467                 .muxsel         = { 2, 3, 1, 1 },
 468                 .gpiomux        = { 1, 1, 2, 3 },
 469                 .needs_tvaudio  = 0,
 470                 .pll            = PLL_28,
 471                 .tuner_type     = TUNER_TEMIC_PAL,
 472                 .tuner_addr     = ADDR_UNSET,
 473                 .radio_addr     = ADDR_UNSET,
 474         },
 475         [BTTV_BOARD_HAUPPAUGE878] = {
 476                 .name           = "Hauppauge (bt878)",
 477                 .video_inputs   = 4,
 478                 .audio_inputs   = 1,
 479                 .tuner          = 0,
 480                 .svhs           = 2,
 481                 .gpiomask       = 0x0f, /* old: 7 */
 482                 .muxsel         = { 2, 0, 1, 1 },
 483                 .gpiomux        = { 0, 1, 2, 3 },
 484                 .gpiomute       = 4,
 485                 .needs_tvaudio  = 1,
 486                 .pll            = PLL_28,
 487                 .tuner_type     = -1,
 488                 .tuner_addr     = ADDR_UNSET,
 489                 .radio_addr     = ADDR_UNSET,
 490         },
 491         [BTTV_BOARD_MIROPRO] = {
 492                 .name           = "MIRO PCTV pro",
 493                 .video_inputs   = 3,
 494                 .audio_inputs   = 1,
 495                 .tuner          = 0,
 496                 .svhs           = 2,
 497                 .gpiomask       = 0x3014f,
 498                 .muxsel         = { 2, 3, 1, 1 },
 499                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 500                 .gpiomute       = 10,
 501                 .needs_tvaudio  = 1,
 502                 .tuner_type     = -1,
 503                 .tuner_addr     = ADDR_UNSET,
 504                 .radio_addr     = ADDR_UNSET,
 505         },
 506
 507         /* ---- card 0x0c ---------------------------------- */
 508         [BTTV_BOARD_ADSTECH_TV] = {
 509                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 510                 .video_inputs   = 3,
 511                 .audio_inputs   = 1,
 512                 .tuner          = 0,
 513                 .svhs           = 2,
 514                 .gpiomask       = 15,
 515                 .muxsel         = { 2, 3, 1, 1 },
 516                 .gpiomux        = { 13, 14, 11, 7 },
 517                 .needs_tvaudio  = 1,
 518                 .tuner_type     = -1,
 519                 .tuner_addr     = ADDR_UNSET,
 520                 .radio_addr     = ADDR_UNSET,
 521         },
 522         [BTTV_BOARD_AVERMEDIA98] = {
 523                 .name           = "AVerMedia TVCapture 98",
 524                 .video_inputs   = 3,
 525                 .audio_inputs   = 4,
 526                 .tuner          = 0,
 527                 .svhs           = 2,
 528                 .gpiomask       = 15,
 529                 .muxsel         = { 2, 3, 1, 1 },
 530                 .gpiomux        = { 13, 14, 11, 7 },
 531                 .needs_tvaudio  = 1,
 532                 .msp34xx_alt    = 1,
 533                 .pll            = PLL_28,
 534                 .tuner_type     = TUNER_PHILIPS_PAL,
 535                 .tuner_addr     = ADDR_UNSET,
 536                 .radio_addr     = ADDR_UNSET,
 537                 .audio_hook     = avermedia_tv_stereo_audio,
 538                 .no_gpioirq     = 1,
 539         },
 540         [BTTV_BOARD_VHX] = {
 541                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 542                 .video_inputs   = 3,
 543                 .audio_inputs   = 1,
 544                 .tuner          = 0,
 545                 .svhs           = 2,
 546                 .gpiomask       = 7,
 547                 .muxsel         = { 2, 3, 1, 1 },
 548                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 549                 .gpiomute       = 4,
 550                 .needs_tvaudio  = 1,
 551                 .pll            = PLL_28,
 552                 .tuner_type     = -1,
 553                 .tuner_addr     = ADDR_UNSET,
 554                 .radio_addr     = ADDR_UNSET,
 555         },
 556         [BTTV_BOARD_ZOLTRIX] = {
 557                 .name           = "Zoltrix TV-Max",
 558                 .video_inputs   = 3,
 559                 .audio_inputs   = 1,
 560                 .tuner          = 0,
 561                 .svhs           = 2,
 562                 .gpiomask       = 15,
 563                 .muxsel         = { 2, 3, 1, 1 },
 564                 .gpiomux        = { 0, 0, 1, 0 },
 565                 .gpiomute       = 10,
 566                 .needs_tvaudio  = 1,
 567                 .tuner_type     = -1,
 568                 .tuner_addr     = ADDR_UNSET,
 569                 .radio_addr     = ADDR_UNSET,
 570         },
 571
 572         /* ---- card 0x10 ---------------------------------- */
 573         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 574                 .name           = "Prolink Pixelview PlayTV (bt878)",
 575                 .video_inputs   = 3,
 576                 .audio_inputs   = 1,
 577                 .tuner          = 0,
 578                 .svhs           = 2,
 579                 .gpiomask       = 0x01fe00,
 580                 .muxsel         = { 2, 3, 1, 1 },
 581         #if 0
 582                 /* old */
 583                 .gpiomux        = { 0x01c000, 0, 0x018000, 0x014000, 0x002000 },
 584         #else
 585                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 586                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 587                 .gpiomute       = 0x002000,
 588         #endif
 589                 .needs_tvaudio  = 1,
 590                 .pll            = PLL_28,
 591                 .tuner_type     = -1,
 592         },
 593         [BTTV_BOARD_WINVIEW_601] = {
 594                 .name           = "Leadtek WinView 601",
 595                 .video_inputs   = 3,
 596                 .audio_inputs   = 1,
 597                 .tuner          = 0,
 598                 .svhs           = 2,
 599                 .gpiomask       = 0x8300f8,
 600                 .muxsel         = { 2, 3, 1, 1,0 },
 601                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 602                 .gpiomute       = 0xcfa007,
 603                 .needs_tvaudio  = 1,
 604                 .tuner_type     = -1,
 605                 .tuner_addr     = ADDR_UNSET,
 606                 .radio_addr     = ADDR_UNSET,
 607                 .audio_hook     = winview_audio,
 608                 .has_radio      = 1,
 609         },
 610         [BTTV_BOARD_AVEC_INTERCAP] = {
 611                 .name           = "AVEC Intercapture",
 612                 .video_inputs   = 3,
 613                 .audio_inputs   = 2,
 614                 .tuner          = 0,
 615                 .svhs           = 2,
 616                 .gpiomask       = 0,
 617                 .muxsel         = { 2, 3, 1, 1 },
 618                 .gpiomux        = { 1, 0, 0, 0 },
 619                 .needs_tvaudio  = 1,
 620                 .tuner_type     = -1,
 621                 .tuner_addr     = ADDR_UNSET,
 622                 .radio_addr     = ADDR_UNSET,
 623         },
 624         [BTTV_BOARD_LIFE_FLYKIT] = {
 625                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 626                 .video_inputs   = 4,
 627                 .audio_inputs   = 1,
 628                 .tuner          = -1,
 629                 .svhs           = -1,
 630                 .gpiomask       = 0x8dff00,
 631                 .muxsel         = { 2, 3, 1, 1 },
 632                 .gpiomux        = { 0 },
 633                 .no_msp34xx     = 1,
 634                 .tuner_type     = -1,
 635                 .tuner_addr     = ADDR_UNSET,
 636                 .radio_addr     = ADDR_UNSET,
 637         },
 638
 639         /* ---- card 0x14 ---------------------------------- */
 640         [BTTV_BOARD_CEI_RAFFLES] = {
 641                 .name           = "CEI Raffles Card",
 642                 .video_inputs   = 3,
 643                 .audio_inputs   = 3,
 644                 .tuner          = 0,
 645                 .svhs           = 2,
 646                 .muxsel         = { 2, 3, 1, 1 },
 647                 .tuner_type     = -1,
 648                 .tuner_addr     = ADDR_UNSET,
 649                 .radio_addr     = ADDR_UNSET,
 650         },
 651         [BTTV_BOARD_CONFERENCETV] = {
 652                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 653                 .video_inputs   = 4,
 654                 .audio_inputs   = 2,  /* tuner, line in */
 655                 .tuner          = 0,
 656                 .svhs           = 2,
 657                 .gpiomask       = 0x1800,
 658                 .muxsel         = { 2, 3, 1, 1 },
 659                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 660                 .gpiomute       = 0x1800,
 661                 .pll            = PLL_28,
 662                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 663                 .tuner_addr     = ADDR_UNSET,
 664                 .radio_addr     = ADDR_UNSET,
 665         },
 666         [BTTV_BOARD_PHOEBE_TVMAS] = {
 667                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 668                 .video_inputs   = 3,
 669                 .audio_inputs   = 1,
 670                 .tuner          = 0,
 671                 .svhs           = 2,
 672                 .gpiomask       = 0xc00,
 673                 .muxsel         = { 2, 3, 1, 1 },
 674                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 675                 .gpiomute       = 0xc00,
 676                 .needs_tvaudio  = 1,
 677                 .pll            = PLL_28,
 678                 .tuner_type     = -1,
 679                 .tuner_addr     = ADDR_UNSET,
 680                 .radio_addr     = ADDR_UNSET,
 681         },
 682         [BTTV_BOARD_MODTEC_205] = {
 683                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 684                 .video_inputs   = 3,
 685                 .audio_inputs   = 1,
 686                 .tuner          = 0,
 687                 .svhs           = -1,
 688                 .gpiomask       = 7,
 689                 .muxsel         = { 2, 3, -1 },
 690                 .digital_mode   = DIGITAL_MODE_CAMERA,
 691                 .gpiomux        = { 0, 0, 0, 0 },
 692                 .no_msp34xx     = 1,
 693                 .pll            = PLL_28,
 694                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 695                 .tuner_addr     = ADDR_UNSET,
 696                 .radio_addr     = ADDR_UNSET,
 697         },
 698
 699         /* ---- card 0x18 ---------------------------------- */
 700         [BTTV_BOARD_MAGICTVIEW061] = {
 701                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 702                 .video_inputs   = 3,
 703                 .audio_inputs   = 1,
 704                 .tuner          = 0,
 705                 .svhs           = 2,
 706                 .gpiomask       = 0xe00,
 707                 .muxsel         = { 2, 3, 1, 1 },
 708                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 709                 .gpiomute       = 0xc00,
 710                 .needs_tvaudio  = 1,
 711                 .pll            = PLL_28,
 712                 .tuner_type     = -1,
 713                 .tuner_addr     = ADDR_UNSET,
 714                 .radio_addr     = ADDR_UNSET,
 715                 .has_remote     = 1,
 716         },
 717         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 718                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 719                 .video_inputs   = 3,
 720                 .audio_inputs   = 1,
 721                 .tuner          = 0,
 722                 .svhs           = 2,
 723                 .gpiomask       = 0x1f0fff,
 724                 .muxsel         = { 2, 3, 1, 1 },
 725                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 726                 .gpiomute       = 0x40000,
 727                 .needs_tvaudio  = 0,
 728                 .tuner_type     = TUNER_PHILIPS_PAL,
 729                 .tuner_addr     = ADDR_UNSET,
 730                 .radio_addr     = ADDR_UNSET,
 731                 .audio_hook     = terratv_audio,
 732         },
 733         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 734                 .name           = "Hauppauge WinCam newer (bt878)",
 735                 .video_inputs   = 4,
 736                 .audio_inputs   = 1,
 737                 .tuner          = 0,
 738                 .svhs           = 3,
 739                 .gpiomask       = 7,
 740                 .muxsel         = { 2, 0, 1, 1 },
 741                 .gpiomux        = { 0, 1, 2, 3 },
 742                 .gpiomute       = 4,
 743                 .needs_tvaudio  = 1,
 744                 .tuner_type     = -1,
 745                 .tuner_addr     = ADDR_UNSET,
 746                 .radio_addr     = ADDR_UNSET,
 747         },
 748         [BTTV_BOARD_MAXI] = {
 749                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 750                 .video_inputs   = 4,
 751                 .audio_inputs   = 2,
 752                 .tuner          = 0,
 753                 .svhs           = 2,
 754                 .gpiomask       = 0x1800,
 755                 .muxsel         = { 2, 3, 1, 1 },
 756                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 757                 .gpiomute       = 0x1800,
 758                 .pll            = PLL_28,
 759                 .tuner_type     = TUNER_PHILIPS_SECAM,
 760                 .tuner_addr     = ADDR_UNSET,
 761                 .radio_addr     = ADDR_UNSET,
 762         },
 763
 764         /* ---- card 0x1c ---------------------------------- */
 765         [BTTV_BOARD_TERRATV] = {
 766                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 767                 .video_inputs   = 3,
 768                 .audio_inputs   = 1,
 769                 .tuner          = 0,
 770                 .svhs           = 2,
 771                 .gpiomask       = 0x1f0fff,
 772                 .muxsel         = { 2, 3, 1, 1 },
 773                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 774                 .gpiomute       = 0x40000,
 775                 .needs_tvaudio  = 0,
 776                 .tuner_type     = TUNER_PHILIPS_PAL,
 777                 .tuner_addr     = ADDR_UNSET,
 778                 .radio_addr     = ADDR_UNSET,
 779                 .audio_hook     = terratv_audio,
 780                 /* GPIO wiring:
 781                 External 20 pin connector (for Active Radio Upgrade board)
 782                 gpio00: i2c-sda
 783                 gpio01: i2c-scl
 784                 gpio02: om5610-data
 785                 gpio03: om5610-clk
 786                 gpio04: om5610-wre
 787                 gpio05: om5610-stereo
 788                 gpio06: rds6588-davn
 789                 gpio07: Pin 7 n.c.
 790                 gpio08: nIOW
 791                 gpio09+10: nIOR, nSEL ?? (bt878)
 792                         gpio09: nIOR (bt848)
 793                         gpio10: nSEL (bt848)
 794                 Sound Routing:
 795                 gpio16: u2-A0 (1st 4052bt)
 796                 gpio17: u2-A1
 797                 gpio18: u2-nEN
 798                 gpio19: u4-A0 (2nd 4052)
 799                 gpio20: u4-A1
 800                         u4-nEN - GND
 801                 Btspy:
 802                         00000 : Cdrom (internal audio input)
 803                         10000 : ext. Video audio input
 804                         20000 : TV Mono
 805                         a0000 : TV Mono/2
 806                 1a0000 : TV Stereo
 807                         30000 : Radio
 808                         40000 : Mute
 809         */
 810
 811         },
 812         [BTTV_BOARD_PXC200] = {
 813                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 814                 .name           = "Imagenation PXC200",
 815                 .video_inputs   = 5,
 816                 .audio_inputs   = 1,
 817                 .tuner          = -1,
 818                 .svhs           = 1, /* was: 4 */
 819                 .gpiomask       = 0,
 820                 .muxsel         = { 2, 3, 1, 0, 0},
 821                 .gpiomux        = { 0 },
 822                 .needs_tvaudio  = 1,
 823                 .tuner_type     = -1,
 824                 .tuner_addr     = ADDR_UNSET,
 825                 .radio_addr     = ADDR_UNSET,
 826                 .muxsel_hook    = PXC200_muxsel,
 827
 828         },
 829         [BTTV_BOARD_FLYVIDEO_98] = {
 830                 .name           = "Lifeview FlyVideo 98 LR50",
 831                 .video_inputs   = 4,
 832                 .audio_inputs   = 1,
 833                 .tuner          = 0,
 834                 .svhs           = 2,
 835                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 836                 .muxsel         = { 2, 3, 1, 1 },
 837                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 838                 .gpiomute       = 0x1800,
 839                 .pll            = PLL_28,
 840                 .tuner_type     = -1,
 841                 .tuner_addr     = ADDR_UNSET,
 842                 .radio_addr     = ADDR_UNSET,
 843         },
 844         [BTTV_BOARD_IPROTV] = {
 845                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 846                 .video_inputs   = 4,
 847                 .audio_inputs   = 1,
 848                 .tuner          = 0,
 849                 .svhs           = 3,
 850                 .gpiomask       = 1,
 851                 .muxsel         = { 2, 3, 1, 1 },
 852                 .gpiomux        = { 1, 0, 0, 0 },
 853                 .pll            = PLL_28,
 854                 .tuner_type     = TUNER_PHILIPS_PAL,
 855                 .tuner_addr     = ADDR_UNSET,
 856                 .radio_addr     = ADDR_UNSET,
 857         },
 858
 859         /* ---- card 0x20 ---------------------------------- */
 860         [BTTV_BOARD_INTEL_C_S_PCI] = {
 861                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 862                 .video_inputs   = 4,
 863                 .audio_inputs   = 0,
 864                 .tuner          = -1,
 865                 .svhs           = 2,
 866                 .gpiomask       = 0,
 867                 .muxsel         = { 2, 3, 1, 1 },
 868                 .gpiomux        = { 0 },
 869                 .needs_tvaudio  = 0,
 870                 .tuner_type     = 4,
 871                 .tuner_addr     = ADDR_UNSET,
 872                 .radio_addr     = ADDR_UNSET,
 873         },
 874         [BTTV_BOARD_TERRATVALUE] = {
 875                 .name           = "Terratec TerraTValue Version Bt878",
 876                 .video_inputs   = 3,
 877                 .audio_inputs   = 1,
 878                 .tuner          = 0,
 879                 .svhs           = 2,
 880                 .gpiomask       = 0xffff00,
 881                 .muxsel         = { 2, 3, 1, 1 },
 882                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 883                 .gpiomute       = 0x900,
 884                 .needs_tvaudio  = 1,
 885                 .pll            = PLL_28,
 886                 .tuner_type     = TUNER_PHILIPS_PAL,
 887                 .tuner_addr     = ADDR_UNSET,
 888                 .radio_addr     = ADDR_UNSET,
 889         },
 890         [BTTV_BOARD_WINFAST2000] = {
 891                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 892                 .video_inputs   = 4,
 893                 .audio_inputs   = 1,
 894                 .tuner          = 0,
 895                 .svhs           = 2,
 896                 .muxsel         = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
 897         #if 0
 898                 .gpiomask       = 0xc33000,
 899                 .gpiomux        = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
 900         #else
 901                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 902                 .gpiomask       = 0xb33000,
 903                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 904                 .gpiomute       = 0x800000,
 905         #endif
 906                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 907                         gpio23 -- hef4052:nEnable (0x800000)
 908                         gpio12 -- hef4052:A1
 909                         gpio13 -- hef4052:A0
 910                 0x0000: external audio
 911                 0x1000: FM
 912                 0x2000: TV
 913                 0x3000: n.c.
 914                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 915                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 916                 */
 917                 .needs_tvaudio  = 0,
 918                 .pll            = PLL_28,
 919                 .has_radio      = 1,
 920                 .tuner_type     = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 921                 .tuner_addr     = ADDR_UNSET,
 922                 .radio_addr     = ADDR_UNSET,
 923                 .audio_hook     = winfast2000_audio,
 924                 .has_remote     = 1,
 925         },
 926         [BTTV_BOARD_CHRONOS_VS2] = {
 927                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 928                 .video_inputs   = 4,
 929                 .audio_inputs   = 3,
 930                 .tuner          = 0,
 931                 .svhs           = 2,
 932                 .gpiomask       = 0x1800,
 933                 .muxsel         = { 2, 3, 1, 1 },
 934                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 935                 .gpiomute       = 0x1800,
 936                 .pll            = PLL_28,
 937                 .tuner_type     = -1,
 938                 .tuner_addr     = ADDR_UNSET,
 939                 .radio_addr     = ADDR_UNSET,
 940         },
 941
 942         /* ---- card 0x24 ---------------------------------- */
 943         [BTTV_BOARD_TYPHOON_TVIEW] = {
 944                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 945                 .video_inputs   = 4,
 946                 .audio_inputs   = 3,
 947                 .tuner          = 0,
 948                 .svhs           = 2,
 949                 .gpiomask       = 0x1800,
 950                 .muxsel         = { 2, 3, 1, 1 },
 951                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 952                 .gpiomute       = 0x1800,
 953                 .pll            = PLL_28,
 954                 .tuner_type     = -1,
 955                 .tuner_addr     = ADDR_UNSET,
 956                 .radio_addr     = ADDR_UNSET,
 957                 .has_radio      = 1,
 958         },
 959         [BTTV_BOARD_PXELVWPLTVPRO] = {
 960                 .name           = "Prolink PixelView PlayTV pro",
 961                 .video_inputs   = 3,
 962                 .audio_inputs   = 1,
 963                 .tuner          = 0,
 964                 .svhs           = 2,
 965                 .gpiomask       = 0xff,
 966                 .muxsel         = { 2, 3, 1, 1 },
 967                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 968                 .gpiomute       = 0x29,
 969                 .no_msp34xx     = 1,
 970                 .pll            = PLL_28,
 971                 .tuner_type     = -1,
 972                 .tuner_addr     = ADDR_UNSET,
 973                 .radio_addr     = ADDR_UNSET,
 974         },
 975         [BTTV_BOARD_MAGICTVIEW063] = {
 976                 .name           = "Askey CPH06X TView99",
 977                 .video_inputs   = 4,
 978                 .audio_inputs   = 1,
 979                 .tuner          = 0,
 980                 .svhs           = 2,
 981                 .gpiomask       = 0x551e00,
 982                 .muxsel         = { 2, 3, 1, 0 },
 983                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 984                 .gpiomute       = 0x551c00,
 985                 .needs_tvaudio  = 1,
 986                 .pll            = PLL_28,
 987                 .tuner_type     = 1,
 988                 .tuner_addr     = ADDR_UNSET,
 989                 .radio_addr     = ADDR_UNSET,
 990                 .has_remote     = 1,
 991         },
 992         [BTTV_BOARD_PINNACLE] = {
 993                 .name           = "Pinnacle PCTV Studio/Rave",
 994                 .video_inputs   = 3,
 995                 .audio_inputs   = 1,
 996                 .tuner          = 0,
 997                 .svhs           = 2,
 998                 .gpiomask       = 0x03000F,
 999                 .muxsel         = { 2, 3, 1, 1 },
1000                 .gpiomux        = { 2, 0xd0001, 0, 0 },
1001                 .gpiomute       = 1,
1002                 .needs_tvaudio  = 0,
1003                 .pll            = PLL_28,
1004                 .tuner_type     = -1,
1005                 .tuner_addr     = ADDR_UNSET,
1006                 .radio_addr     = ADDR_UNSET,
1007         },
1008
1009         /* ---- card 0x28 ---------------------------------- */
1010         [BTTV_BOARD_STB2] = {
1011                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1012                 .video_inputs   = 3,
1013                 .audio_inputs   = 1,
1014                 .tuner          = 0,
1015                 .svhs           = 2,
1016                 .gpiomask       = 7,
1017                 .muxsel         = { 2, 3, 1, 1 },
1018                 .gpiomux        = { 4, 0, 2, 3 },
1019                 .gpiomute       = 1,
1020                 .no_msp34xx     = 1,
1021                 .needs_tvaudio  = 1,
1022                 .tuner_type     = TUNER_PHILIPS_NTSC,
1023                 .tuner_addr     = ADDR_UNSET,
1024                 .radio_addr     = ADDR_UNSET,
1025                 .pll            = PLL_28,
1026                 .has_radio      = 1,
1027         },
1028         [BTTV_BOARD_AVPHONE98] = {
1029                 .name           = "AVerMedia TVPhone 98",
1030                 .video_inputs   = 3,
1031                 .audio_inputs   = 4,
1032                 .tuner          = 0,
1033                 .svhs           = 2,
1034                 .gpiomask       = 15,
1035                 .muxsel         = { 2, 3, 1, 1 },
1036                 .gpiomux        = { 13, 4, 11, 7 },
1037                 .needs_tvaudio  = 1,
1038                 .pll            = PLL_28,
1039                 .tuner_type     = -1,
1040                 .tuner_addr     = ADDR_UNSET,
1041                 .radio_addr     = ADDR_UNSET,
1042                 .has_radio      = 1,
1043                 .audio_hook     = avermedia_tvphone_audio,
1044         },
1045         [BTTV_BOARD_PV951] = {
1046                 .name           = "ProVideo PV951", /* pic16c54 */
1047                 .video_inputs   = 3,
1048                 .audio_inputs   = 1,
1049                 .tuner          = 0,
1050                 .svhs           = 2,
1051                 .gpiomask       = 0,
1052                 .muxsel         = { 2, 3, 1, 1},
1053                 .gpiomux        = { 0, 0, 0, 0},
1054                 .needs_tvaudio  = 1,
1055                 .no_msp34xx     = 1,
1056                 .pll            = PLL_28,
1057                 .tuner_type     = 1,
1058                 .tuner_addr     = ADDR_UNSET,
1059                 .radio_addr     = ADDR_UNSET,
1060         },
1061         [BTTV_BOARD_ONAIR_TV] = {
1062                 .name           = "Little OnAir TV",
1063                 .video_inputs   = 3,
1064                 .audio_inputs   = 1,
1065                 .tuner          = 0,
1066                 .svhs           = 2,
1067                 .gpiomask       = 0xe00b,
1068                 .muxsel         = { 2, 3, 1, 1 },
1069                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1070                 .gpiomute       = 0xff3ffc,
1071                 .no_msp34xx     = 1,
1072                 .tuner_type     = -1,
1073                 .tuner_addr     = ADDR_UNSET,
1074                 .radio_addr     = ADDR_UNSET,
1075         },
1076
1077         /* ---- card 0x2c ---------------------------------- */
1078         [BTTV_BOARD_SIGMA_TVII_FM] = {
1079                 .name           = "Sigma TVII-FM",
1080                 .video_inputs   = 2,
1081                 .audio_inputs   = 1,
1082                 .tuner          = 0,
1083                 .svhs           = -1,
1084                 .gpiomask       = 3,
1085                 .muxsel         = { 2, 3, 1, 1 },
1086                 .gpiomux        = { 1, 1, 0, 2 },
1087                 .gpiomute       = 3,
1088                 .no_msp34xx     = 1,
1089                 .pll            = PLL_NONE,
1090                 .tuner_type     = -1,
1091                 .tuner_addr     = ADDR_UNSET,
1092                 .radio_addr     = ADDR_UNSET,
1093         },
1094         [BTTV_BOARD_MATRIX_VISION2] = {
1095                 .name           = "MATRIX-Vision MV-Delta 2",
1096                 .video_inputs   = 5,
1097                 .audio_inputs   = 1,
1098                 .tuner          = -1,
1099                 .svhs           = 3,
1100                 .gpiomask       = 0,
1101                 .muxsel         = { 2, 3, 1, 0, 0 },
1102                 .gpiomux        = { 0 },
1103                 .no_msp34xx     = 1,
1104                 .pll            = PLL_28,
1105                 .tuner_type     = -1,
1106                 .tuner_addr     = ADDR_UNSET,
1107                 .radio_addr     = ADDR_UNSET,
1108         },
1109         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1110                 .name           = "Zoltrix Genie TV/FM",
1111                 .video_inputs   = 3,
1112                 .audio_inputs   = 1,
1113                 .tuner          = 0,
1114                 .svhs           = 2,
1115                 .gpiomask       = 0xbcf03f,
1116                 .muxsel         = { 2, 3, 1, 1 },
1117                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1118                 .gpiomute       = 0xbcb03f,
1119                 .no_msp34xx     = 1,
1120                 .pll            = PLL_28,
1121                 .tuner_type     = 21,
1122                 .tuner_addr     = ADDR_UNSET,
1123                 .radio_addr     = ADDR_UNSET,
1124         },
1125         [BTTV_BOARD_TERRATVRADIO] = {
1126                 .name           = "Terratec TV/Radio+",
1127                 .video_inputs   = 3,
1128                 .audio_inputs   = 1,
1129                 .tuner          = 0,
1130                 .svhs           = 2,
1131                 .gpiomask       = 0x70000,
1132                 .muxsel         = { 2, 3, 1, 1 },
1133                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1134                 .gpiomute       = 0x40000,
1135                 .needs_tvaudio  = 1,
1136                 .no_msp34xx     = 1,
1137                 .pll            = PLL_35,
1138                 .tuner_type     = 1,
1139                 .tuner_addr     = ADDR_UNSET,
1140                 .radio_addr     = ADDR_UNSET,
1141                 .has_radio      = 1,
1142         },
1143
1144         /* ---- card 0x30 ---------------------------------- */
1145         [BTTV_BOARD_DYNALINK] = {
1146                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1147                 .video_inputs   = 3,
1148                 .audio_inputs   = 1,
1149                 .tuner          = 0,
1150                 .svhs           = 2,
1151                 .gpiomask       = 15,
1152                 .muxsel         = { 2, 3, 1, 1 },
1153                 .gpiomux        = {2,0,0,0 },
1154                 .gpiomute       = 1,
1155                 .needs_tvaudio  = 1,
1156                 .pll            = PLL_28,
1157                 .tuner_type     = -1,
1158                 .tuner_addr     = ADDR_UNSET,
1159                 .radio_addr     = ADDR_UNSET,
1160         },
1161         [BTTV_BOARD_GVBCTV3PCI] = {
1162                 .name           = "IODATA GV-BCTV3/PCI",
1163                 .video_inputs   = 3,
1164                 .audio_inputs   = 1,
1165                 .tuner          = 0,
1166                 .svhs           = 2,
1167                 .gpiomask       = 0x010f00,
1168                 .muxsel         = {2, 3, 0, 0 },
1169                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1170                 .no_msp34xx     = 1,
1171                 .pll            = PLL_28,
1172                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1173                 .tuner_addr     = ADDR_UNSET,
1174                 .radio_addr     = ADDR_UNSET,
1175                 .audio_hook     = gvbctv3pci_audio,
1176         },
1177         [BTTV_BOARD_PXELVWPLTVPAK] = {
1178                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1179                 .video_inputs   = 5,
1180                 .audio_inputs   = 1,
1181                 .tuner          = 0,
1182                 .svhs           = 3,
1183                 .gpiomask       = 0xAA0000,
1184                 .muxsel         = { 2,3,1,1,-1 },
1185                 .digital_mode   = DIGITAL_MODE_CAMERA,
1186                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1187                 .gpiomute       = 0xa8000,
1188                 .no_msp34xx     = 1,
1189                 .pll            = PLL_28,
1190                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1191                 .tuner_addr     = ADDR_UNSET,
1192                 .radio_addr     = ADDR_UNSET,
1193                 .has_remote     = 1,
1194                 /* GPIO wiring: (different from Rev.4C !)
1195                         GPIO17: U4.A0 (first hef4052bt)
1196                         GPIO19: U4.A1
1197                         GPIO20: U5.A1 (second hef4052bt)
1198                         GPIO21: U4.nEN
1199                         GPIO22: BT832 Reset Line
1200                         GPIO23: A5,A0, U5,nEN
1201                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1202                 */
1203         },
1204         [BTTV_BOARD_EAGLE] = {
1205                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1206                 .video_inputs   = 4,
1207                 .audio_inputs   = 1,
1208                 .tuner          = 0,
1209                 .svhs           = 2,
1210                 .gpiomask       = 7,
1211                 .muxsel         = { 2, 0, 1, 1 },
1212                 .gpiomux        = { 0, 1, 2, 3 },
1213                 .gpiomute       = 4,
1214                 .pll            = PLL_28,
1215                 .tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1216                 .tuner_addr     = ADDR_UNSET,
1217                 .radio_addr     = ADDR_UNSET,
1218         },
1219
1220         /* ---- card 0x34 ---------------------------------- */
1221         [BTTV_BOARD_PINNACLEPRO] = {
1222                 /* David Härdeman <david@2gen.com> */
1223                 .name           = "Pinnacle PCTV Studio Pro",
1224                 .video_inputs   = 4,
1225                 .audio_inputs   = 1,
1226                 .tuner          = 0,
1227                 .svhs           = 3,
1228                 .gpiomask       = 0x03000F,
1229                 .muxsel         = { 2, 3, 1, 1 },
1230                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1231                 .gpiomute       = 10,
1232                                 /* sound path (5 sources):
1233                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1234                                         0= ext. Audio IN
1235                                         1= from MUX2
1236                                         2= Mono TV sound from Tuner
1237                                         3= not connected
1238                                 MUX2 (mask 0x30000):
1239                                         0,2,3= from MSP34xx
1240                                         1= FM stereo Radio from Tuner */
1241                 .needs_tvaudio  = 0,
1242                 .pll            = PLL_28,
1243                 .tuner_type     = -1,
1244                 .tuner_addr     = ADDR_UNSET,
1245                 .radio_addr     = ADDR_UNSET,
1246         },
1247         [BTTV_BOARD_TVIEW_RDS_FM] = {
1248                 /* Claas Langbehn <claas@bigfoot.com>,
1249                 Sven Grothklags <sven@upb.de> */
1250                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1251                 .video_inputs   = 4,
1252                 .audio_inputs   = 3,
1253                 .tuner          = 0,
1254                 .svhs           = 2,
1255                 .gpiomask       = 0x1c,
1256                 .muxsel         = { 2, 3, 1, 1 },
1257                 .gpiomux        = { 0, 0, 0x10, 8 },
1258                 .gpiomute       = 4,
1259                 .needs_tvaudio  = 1,
1260                 .pll            = PLL_28,
1261                 .tuner_type     = TUNER_PHILIPS_PAL,
1262                 .tuner_addr     = ADDR_UNSET,
1263                 .radio_addr     = ADDR_UNSET,
1264                 .has_radio      = 1,
1265         },
1266         [BTTV_BOARD_LIFETEC_9415] = {
1267                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1268                 in de.comp.os.unix.linux.hardware:
1269                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1270                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1271                         options tuner type=5 */
1272                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1273                 .video_inputs   = 4,
1274                 .audio_inputs   = 1,
1275                 .tuner          = 0,
1276                 .svhs           = 2,
1277                 .gpiomask       = 0x18e0,
1278                 .muxsel         = { 2, 3, 1, 1 },
1279                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1280                 .gpiomute       = 0x18e0,
1281                         /* For cards with tda9820/tda9821:
1282                                 0x0000: Tuner normal stereo
1283                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1284                                 0x0880: Tuner A2 stereo */
1285                 .pll            = PLL_28,
1286                 .tuner_type     = -1,
1287                 .tuner_addr     = ADDR_UNSET,
1288                 .radio_addr     = ADDR_UNSET,
1289         },
1290         [BTTV_BOARD_BESTBUY_EASYTV] = {
1291                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1292                 old Easy TV BT848 version (model CPH031) */
1293                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1294                 .video_inputs   = 4,
1295                 .audio_inputs   = 1,
1296                 .tuner          = 0,
1297                 .svhs           = 2,
1298                 .gpiomask       = 0xF,
1299                 .muxsel         = { 2, 3, 1, 0 },
1300                 .gpiomux        = { 2, 0, 0, 0 },
1301                 .gpiomute       = 10,
1302                 .needs_tvaudio  = 0,
1303                 .pll            = PLL_28,
1304                 .tuner_type     = TUNER_TEMIC_PAL,
1305                 .tuner_addr     = ADDR_UNSET,
1306                 .radio_addr     = ADDR_UNSET,
1307         },
1308
1309         /* ---- card 0x38 ---------------------------------- */
1310         [BTTV_BOARD_FLYVIDEO_98FM] = {
1311                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1312                 .name           = "Lifeview FlyVideo 98FM LR50",
1313                 .video_inputs   = 4,
1314                 .audio_inputs   = 3,
1315                 .tuner          = 0,
1316                 .svhs           = 2,
1317                 .gpiomask       = 0x1800,
1318                 .muxsel         = { 2, 3, 1, 1 },
1319                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1320                 .gpiomute       = 0x1800,
1321                 .pll            = PLL_28,
1322                 .tuner_type     = 5,
1323                 .tuner_addr     = ADDR_UNSET,
1324                 .radio_addr     = ADDR_UNSET,
1325         },
1326                 /* This is the ultimate cheapo capture card
1327                 * just a BT848A on a small PCB!
1328                 * Steve Hosgood <steve@equiinet.com> */
1329         [BTTV_BOARD_GRANDTEC] = {
1330                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1331                 .video_inputs   = 2,
1332                 .audio_inputs   = 0,
1333                 .tuner          = -1,
1334                 .svhs           = 1,
1335                 .gpiomask       = 0,
1336                 .muxsel         = { 3, 1 },
1337                 .gpiomux        = { 0 },
1338                 .needs_tvaudio  = 0,
1339                 .no_msp34xx     = 1,
1340                 .pll            = PLL_35,
1341                 .tuner_type     = -1,
1342                 .tuner_addr     = ADDR_UNSET,
1343                 .radio_addr     = ADDR_UNSET,
1344         },
1345         [BTTV_BOARD_ASKEY_CPH060] = {
1346                 /* Daniel Herrington <daniel.herrington@home.com> */
1347                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1348                 .video_inputs   = 3,
1349                 .audio_inputs   = 1,
1350                 .tuner          = 0,
1351                 .svhs           = 2,
1352                 .gpiomask       = 0xe00,
1353                 .muxsel         = { 2, 3, 1, 1},
1354                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1355                 .gpiomute       = 0x800,
1356                 .needs_tvaudio  = 1,
1357                 .pll            = PLL_28,
1358                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1359                 .tuner_addr     = ADDR_UNSET,
1360                 .radio_addr     = ADDR_UNSET,
1361         },
1362         [BTTV_BOARD_ASKEY_CPH03X] = {
1363                 /* Matti Mottus <mottus@physic.ut.ee> */
1364                 .name           = "Askey CPH03x TV Capturer",
1365                 .video_inputs   = 4,
1366                 .audio_inputs   = 1,
1367                 .tuner          = 0,
1368                 .svhs           = 2,
1369                 .gpiomask       = 0x03000F,
1370                 .muxsel         = { 2, 3, 1, 0 },
1371                 .gpiomux        = { 2, 0, 0, 0 },
1372                 .gpiomute       = 1,
1373                 .pll            = PLL_28,
1374                 .tuner_type     = 0,
1375                 .tuner_addr     = ADDR_UNSET,
1376                 .radio_addr     = ADDR_UNSET,
1377         },
1378
1379         /* ---- card 0x3c ---------------------------------- */
1380         [BTTV_BOARD_MM100PCTV] = {
1381                 /* Philip Blundell <philb@gnu.org> */
1382                 .name           = "Modular Technology MM100PCTV",
1383                 .video_inputs   = 2,
1384                 .audio_inputs   = 2,
1385                 .tuner          = 0,
1386                 .svhs           = -1,
1387                 .gpiomask       = 11,
1388                 .muxsel         = { 2, 3, 1, 1 },
1389                 .gpiomux        = { 2, 0, 0, 1 },
1390                 .gpiomute       = 8,
1391                 .pll            = PLL_35,
1392                 .tuner_type     = TUNER_TEMIC_PAL,
1393                 .tuner_addr     = ADDR_UNSET,
1394                 .radio_addr     = ADDR_UNSET,
1395         },
1396         [BTTV_BOARD_GMV1] = {
1397                 /* Adrian Cox <adrian@humboldt.co.uk */
1398                 .name           = "AG Electronics GMV1",
1399                 .video_inputs   = 2,
1400                 .audio_inputs   = 0,
1401                 .tuner          = -1,
1402                 .svhs           = 1,
1403                 .gpiomask       = 0xF,
1404                 .muxsel         = { 2, 2 },
1405                 .gpiomux        = { },
1406                 .no_msp34xx     = 1,
1407                 .needs_tvaudio  = 0,
1408                 .pll            = PLL_28,
1409                 .tuner_type     = -1,
1410                 .tuner_addr     = ADDR_UNSET,
1411                 .radio_addr     = ADDR_UNSET,
1412         },
1413         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1414                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1415                 new Easy TV BT878 version (model CPH061)
1416                 special thanks to Informatica Mieres for providing the card */
1417                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1418                 .video_inputs   = 3,
1419                 .audio_inputs   = 2,
1420                 .tuner          = 0,
1421                 .svhs           = 2,
1422                 .gpiomask       = 0xFF,
1423                 .muxsel         = { 2, 3, 1, 0 },
1424                 .gpiomux        = { 1, 0, 4, 4 },
1425                 .gpiomute       = 9,
1426                 .needs_tvaudio  = 0,
1427                 .pll            = PLL_28,
1428                 .tuner_type     = TUNER_PHILIPS_PAL,
1429                 .tuner_addr     = ADDR_UNSET,
1430                 .radio_addr     = ADDR_UNSET,
1431         },
1432         [BTTV_BOARD_ATI_TVWONDER] = {
1433                 /* Lukas Gebauer <geby@volny.cz> */
1434                 .name           = "ATI TV-Wonder",
1435                 .video_inputs   = 3,
1436                 .audio_inputs   = 1,
1437                 .tuner          = 0,
1438                 .svhs           = 2,
1439                 .gpiomask       = 0xf03f,
1440                 .muxsel         = { 2, 3, 1, 0 },
1441                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1442                 .gpiomute       = 0xbffe,
1443                 .pll            = PLL_28,
1444                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1445                 .tuner_addr     = ADDR_UNSET,
1446                 .radio_addr     = ADDR_UNSET,
1447         },
1448
1449         /* ---- card 0x40 ---------------------------------- */
1450         [BTTV_BOARD_ATI_TVWONDERVE] = {
1451                 /* Lukas Gebauer <geby@volny.cz> */
1452                 .name           = "ATI TV-Wonder VE",
1453                 .video_inputs   = 2,
1454                 .audio_inputs   = 1,
1455                 .tuner          = 0,
1456                 .svhs           = -1,
1457                 .gpiomask       = 1,
1458                 .muxsel         = { 2, 3, 0, 1 },
1459                 .gpiomux        = { 0, 0, 1, 0 },
1460                 .no_msp34xx     = 1,
1461                 .pll            = PLL_28,
1462                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1463                 .tuner_addr     = ADDR_UNSET,
1464                 .radio_addr     = ADDR_UNSET,
1465         },
1466         [BTTV_BOARD_FLYVIDEO2000] = {
1467                 /* DeeJay <deejay@westel900.net (2000S) */
1468                 .name           = "Lifeview FlyVideo 2000S LR90",
1469                 .video_inputs   = 3,
1470                 .audio_inputs   = 3,
1471                 .tuner          = 0,
1472                 .svhs           = 2,
1473                 .gpiomask       = 0x18e0,
1474                 .muxsel         = { 2, 3, 0, 1 },
1475                                 /* Radio changed from 1e80 to 0x800 to make
1476                                 FlyVideo2000S in .hu happy (gm)*/
1477                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1478                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1479                 .gpiomute       = 0x1800,
1480                 .audio_hook     = fv2000s_audio,
1481                 .no_msp34xx     = 1,
1482                 .no_tda9875     = 1,
1483                 .needs_tvaudio  = 1,
1484                 .pll            = PLL_28,
1485                 .tuner_type     = 5,
1486                 .tuner_addr     = ADDR_UNSET,
1487                 .radio_addr     = ADDR_UNSET,
1488         },
1489         [BTTV_BOARD_TERRATVALUER] = {
1490                 .name           = "Terratec TValueRadio",
1491                 .video_inputs   = 3,
1492                 .audio_inputs   = 1,
1493                 .tuner          = 0,
1494                 .svhs           = 2,
1495                 .gpiomask       = 0xffff00,
1496                 .muxsel         = { 2, 3, 1, 1 },
1497                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1498                 .gpiomute       = 0x900,
1499                 .needs_tvaudio  = 1,
1500                 .pll            = PLL_28,
1501                 .tuner_type     = TUNER_PHILIPS_PAL,
1502                 .tuner_addr     = ADDR_UNSET,
1503                 .radio_addr     = ADDR_UNSET,
1504                 .has_radio      = 1,
1505         },
1506         [BTTV_BOARD_GVBCTV4PCI] = {
1507                 /* TANAKA Kei <peg00625@nifty.com> */
1508                 .name           = "IODATA GV-BCTV4/PCI",
1509                 .video_inputs   = 3,
1510                 .audio_inputs   = 1,
1511                 .tuner          = 0,
1512                 .svhs           = 2,
1513                 .gpiomask       = 0x010f00,
1514                 .muxsel         = {2, 3, 0, 0 },
1515                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1516                 .no_msp34xx     = 1,
1517                 .pll            = PLL_28,
1518                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1519                 .tuner_addr     = ADDR_UNSET,
1520                 .radio_addr     = ADDR_UNSET,
1521                 .audio_hook     = gvbctv3pci_audio,
1522         },
1523
1524         /* ---- card 0x44 ---------------------------------- */
1525         [BTTV_BOARD_VOODOOTV_FM] = {
1526                 .name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1527                 /* try "insmod msp3400 simple=0" if you have
1528                 * sound problems with this card. */
1529                 .video_inputs   = 4,
1530                 .audio_inputs   = 1,
1531                 .tuner          = 0,
1532                 .svhs           = -1,
1533                 .gpiomask       = 0x4f8a00,
1534                 /* 0x100000: 1=MSP enabled (0=disable again)
1535                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1536                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1537                 .gpiomute       = 0x947fff,
1538                 /* tvtuner, radio,   external,internal, mute,  stereo
1539                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1540                 .muxsel         = { 2, 3 ,0 ,1 },
1541                 .tuner_type     = TUNER_MT2032,
1542                 .tuner_addr     = ADDR_UNSET,
1543                 .radio_addr     = ADDR_UNSET,
1544                 .pll            = PLL_28,
1545                 .has_radio      = 1,
1546         },
1547         [BTTV_BOARD_AIMMS] = {
1548                 /* Philip Blundell <pb@nexus.co.uk> */
1549                 .name           = "Active Imaging AIMMS",
1550                 .video_inputs   = 1,
1551                 .audio_inputs   = 0,
1552                 .tuner          = -1,
1553                 .tuner_type     = -1,
1554                 .tuner_addr     = ADDR_UNSET,
1555                 .radio_addr     = ADDR_UNSET,
1556                 .pll            = PLL_28,
1557                 .muxsel         = { 2 },
1558                 .gpiomask       = 0
1559         },
1560         [BTTV_BOARD_PV_BT878P_PLUS] = {
1561                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1562                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1563                 .video_inputs   = 3,
1564                 .audio_inputs   = 4,
1565                 .tuner          = 0,
1566                 .svhs           = 2,
1567                 .gpiomask       = 15,
1568                 .muxsel         = { 2, 3, 1, 1 },
1569                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1570                 .gpiomute       = 13,
1571                 .needs_tvaudio  = 1,
1572                 .pll            = PLL_28,
1573                 .tuner_type     = 25,
1574                 .tuner_addr     = ADDR_UNSET,
1575                 .radio_addr     = ADDR_UNSET,
1576                 .has_remote     = 1,
1577                 /* GPIO wiring:
1578                         GPIO0: U4.A0 (hef4052bt)
1579                         GPIO1: U4.A1
1580                         GPIO2: U4.A1 (second hef4052bt)
1581                         GPIO3: U4.nEN, U5.A0, A5.nEN
1582                         GPIO8-15: vrd866b ?
1583                 */
1584         },
1585         [BTTV_BOARD_FLYVIDEO98EZ] = {
1586                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1587                 .video_inputs   = 4,
1588                 .audio_inputs   = 0,
1589                 .tuner          = -1,
1590                 .svhs           = 2,
1591                 .muxsel         = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1592                 .pll            = PLL_28,
1593                 .no_msp34xx     = 1,
1594                 .tuner_type     = UNSET,
1595                 .tuner_addr     = ADDR_UNSET,
1596                 .radio_addr     = ADDR_UNSET,
1597         },
1598
1599         /* ---- card 0x48 ---------------------------------- */
1600         [BTTV_BOARD_PV_BT878P_9B] = {
1601                 /* Dariusz Kowalewski <darekk@automex.pl> */
1602                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1603                 .video_inputs   = 4,
1604                 .audio_inputs   = 1,
1605                 .tuner          = 0,
1606                 .svhs           = 2,
1607                 .gpiomask       = 0x3f,
1608                 .muxsel         = { 2, 3, 1, 1 },
1609                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1610                 .gpiomute       = 0x09,
1611                 .needs_tvaudio  = 1,
1612                 .no_msp34xx     = 1,
1613                 .no_tda9875     = 1,
1614                 .pll            = PLL_28,
1615                 .tuner_type     = 5,
1616                 .tuner_addr     = ADDR_UNSET,
1617                 .radio_addr     = ADDR_UNSET,
1618                 .audio_hook     = pvbt878p9b_audio, /* Note: not all cards have stereo */
1619                 .has_radio      = 1,  /* Note: not all cards have radio */
1620                 .has_remote     = 1,
1621                 /* GPIO wiring:
1622                         GPIO0: A0 hef4052
1623                         GPIO1: A1 hef4052
1624                         GPIO3: nEN hef4052
1625                         GPIO8-15: vrd866b
1626                         GPIO20,22,23: R30,R29,R28
1627                 */
1628         },
1629         [BTTV_BOARD_SENSORAY311] = {
1630                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1631                 /* you must jumper JP5 for the card to work */
1632                 .name           = "Sensoray 311",
1633                 .video_inputs   = 5,
1634                 .audio_inputs   = 0,
1635                 .tuner          = -1,
1636                 .svhs           = 4,
1637                 .gpiomask       = 0,
1638                 .muxsel         = { 2, 3, 1, 0, 0 },
1639                 .gpiomux        = { 0 },
1640                 .needs_tvaudio  = 0,
1641                 .tuner_type     = -1,
1642                 .tuner_addr     = ADDR_UNSET,
1643                 .radio_addr     = ADDR_UNSET,
1644         },
1645         [BTTV_BOARD_RV605] = {
1646                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1647                 .name           = "RemoteVision MX (RV605)",
1648                 .video_inputs   = 16,
1649                 .audio_inputs   = 0,
1650                 .tuner          = -1,
1651                 .svhs           = -1,
1652                 .gpiomask       = 0x00,
1653                 .gpiomask2      = 0x07ff,
1654                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1655                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1656                 .no_msp34xx     = 1,
1657                 .no_tda9875     = 1,
1658                 .tuner_type     = -1,
1659                 .tuner_addr     = ADDR_UNSET,
1660                 .radio_addr     = ADDR_UNSET,
1661                 .muxsel_hook    = rv605_muxsel,
1662         },
1663         [BTTV_BOARD_POWERCLR_MTV878] = {
1664                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1665                 .video_inputs   = 3,
1666                 .audio_inputs   = 2,
1667                 .tuner          = 0,
1668                 .svhs           = 2,
1669                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1670                 .muxsel         = { 2, 1, 1, },
1671                 .gpiomux        = { 0, 1, 2, 2 },
1672                 .gpiomute       = 4,
1673                 .needs_tvaudio  = 0,
1674                 .tuner_type     = TUNER_PHILIPS_PAL,
1675                 .tuner_addr     = ADDR_UNSET,
1676                 .radio_addr     = ADDR_UNSET,
1677                 .pll            = PLL_28,
1678                 .has_radio      = 1,
1679         },
1680
1681         /* ---- card 0x4c ---------------------------------- */
1682         [BTTV_BOARD_WINDVR] = {
1683                 /* Masaki Suzuki <masaki@btree.org> */
1684                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1685                 .video_inputs   = 3,
1686                 .audio_inputs   = 1,
1687                 .tuner          = 0,
1688                 .svhs           = 2,
1689                 .gpiomask       = 0x140007,
1690                 .muxsel         = { 2, 3, 1, 1 },
1691                 .gpiomux        = { 0, 1, 2, 3 },
1692                 .gpiomute       = 4,
1693                 .tuner_type     = TUNER_PHILIPS_NTSC,
1694                 .tuner_addr     = ADDR_UNSET,
1695                 .radio_addr     = ADDR_UNSET,
1696                 .audio_hook     = windvr_audio,
1697         },
1698         [BTTV_BOARD_GRANDTEC_MULTI] = {
1699                 .name           = "GrandTec Multi Capture Card (Bt878)",
1700                 .video_inputs   = 4,
1701                 .audio_inputs   = 0,
1702                 .tuner          = -1,
1703                 .svhs           = -1,
1704                 .gpiomask       = 0,
1705                 .muxsel         = { 2, 3, 1, 0 },
1706                 .gpiomux        = { 0 },
1707                 .needs_tvaudio  = 0,
1708                 .no_msp34xx     = 1,
1709                 .pll            = PLL_28,
1710                 .tuner_type     = -1,
1711                 .tuner_addr     = ADDR_UNSET,
1712                 .radio_addr     = ADDR_UNSET,
1713         },
1714         [BTTV_BOARD_KWORLD] = {
1715                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1716                 .video_inputs   = 4,
1717                 .audio_inputs   = 3,
1718                 .tuner          = 0,
1719                 .svhs           = 2,
1720                 .gpiomask       = 7,
1721                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1722                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1723                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1724                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1725                                                 * This card lacks PCI subsystem ID, sigh.
1726                                                 * gpiomux =1: lower volume, 2+3: mute
1727                                                 * btwincap uses 0x80000/0x80003
1728                                                 */
1729                 .gpiomute       = 4,
1730                 .needs_tvaudio  = 0,
1731                 .no_msp34xx     = 1,
1732                 .pll            = PLL_28,
1733                 .tuner_type     = 5,
1734                 .tuner_addr     = ADDR_UNSET,
1735                 .radio_addr     = ADDR_UNSET,
1736                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1737                 radio signal strength indicators work fine. */
1738                 .has_radio      = 1,
1739                 /* GPIO Info:
1740                         GPIO0,1:   HEF4052 A0,A1
1741                         GPIO2:     HEF4052 nENABLE
1742                         GPIO3-7:   n.c.
1743                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1744                         GPIO14,15: ??
1745                         GPIO16-21: n.c.
1746                         GPIO22,23: ??
1747                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1748         },
1749         [BTTV_BOARD_DSP_TCVIDEO] = {
1750                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1751                 .name           = "DSP Design TCVIDEO",
1752                 .video_inputs   = 4,
1753                 .svhs           = -1,
1754                 .muxsel         = { 2, 3, 1, 0 },
1755                 .pll            = PLL_28,
1756                 .tuner_type     = -1,
1757                 .tuner_addr     = ADDR_UNSET,
1758                 .radio_addr     = ADDR_UNSET,
1759         },
1760
1761                 /* ---- card 0x50 ---------------------------------- */
1762         [BTTV_BOARD_HAUPPAUGEPVR] = {
1763                 .name           = "Hauppauge WinTV PVR",
1764                 .video_inputs   = 4,
1765                 .audio_inputs   = 1,
1766                 .tuner          = 0,
1767                 .svhs           = 2,
1768                 .muxsel         = { 2, 0, 1, 1 },
1769                 .needs_tvaudio  = 1,
1770                 .pll            = PLL_28,
1771                 .tuner_type     = -1,
1772                 .tuner_addr     = ADDR_UNSET,
1773                 .radio_addr     = ADDR_UNSET,
1774
1775                 .gpiomask       = 7,
1776                 .gpiomux        = {7},
1777         },
1778         [BTTV_BOARD_GVBCTV5PCI] = {
1779                 .name           = "IODATA GV-BCTV5/PCI",
1780                 .video_inputs   = 3,
1781                 .audio_inputs   = 1,
1782                 .tuner          = 0,
1783                 .svhs           = 2,
1784                 .gpiomask       = 0x0f0f80,
1785                 .muxsel         = {2, 3, 1, 0 },
1786                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1787                 .gpiomute       = 0x020000,
1788                 .no_msp34xx     = 1,
1789                 .pll            = PLL_28,
1790                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1791                 .tuner_addr     = ADDR_UNSET,
1792                 .radio_addr     = ADDR_UNSET,
1793                 .audio_hook     = gvbctv5pci_audio,
1794                 .has_radio      = 1,
1795         },
1796         [BTTV_BOARD_OSPREY1x0] = {
1797                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1798                 .video_inputs   = 4,                  /* id-inputs-clock */
1799                 .audio_inputs   = 0,
1800                 .tuner          = -1,
1801                 .svhs           = 3,
1802                 .muxsel         = { 3, 2, 0, 1 },
1803                 .pll            = PLL_28,
1804                 .tuner_type     = -1,
1805                 .tuner_addr     = ADDR_UNSET,
1806                 .radio_addr     = ADDR_UNSET,
1807                 .no_msp34xx     = 1,
1808                 .no_tda9875     = 1,
1809                 .no_tda7432     = 1,
1810         },
1811         [BTTV_BOARD_OSPREY1x0_848] = {
1812                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1813                 .video_inputs   = 3,
1814                 .audio_inputs   = 0,
1815                 .tuner          = -1,
1816                 .svhs           = 2,
1817                 .muxsel         = { 2, 3, 1 },
1818                 .pll            = PLL_28,
1819                 .tuner_type     = -1,
1820                 .tuner_addr     = ADDR_UNSET,
1821                 .radio_addr     = ADDR_UNSET,
1822                 .no_msp34xx     = 1,
1823                 .no_tda9875     = 1,
1824                 .no_tda7432     = 1,
1825         },
1826
1827                 /* ---- card 0x54 ---------------------------------- */
1828         [BTTV_BOARD_OSPREY101_848] = {
1829                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1830                 .video_inputs   = 2,
1831                 .audio_inputs   = 0,
1832                 .tuner          = -1,
1833                 .svhs           = 1,
1834                 .muxsel         = { 3, 1 },
1835                 .pll            = PLL_28,
1836                 .tuner_type     = -1,
1837                 .tuner_addr     = ADDR_UNSET,
1838                 .radio_addr     = ADDR_UNSET,
1839                 .no_msp34xx     = 1,
1840                 .no_tda9875     = 1,
1841                 .no_tda7432     = 1,
1842         },
1843         [BTTV_BOARD_OSPREY1x1] = {
1844                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1845                 .video_inputs   = 1,
1846                 .audio_inputs   = 0,
1847                 .tuner          = -1,
1848                 .svhs           = -1,
1849                 .muxsel         = { 0 },
1850                 .pll            = PLL_28,
1851                 .tuner_type     = -1,
1852                 .tuner_addr     = ADDR_UNSET,
1853                 .radio_addr     = ADDR_UNSET,
1854                 .no_msp34xx     = 1,
1855                 .no_tda9875     = 1,
1856                 .no_tda7432     = 1,
1857         },
1858         [BTTV_BOARD_OSPREY1x1_SVID] = {
1859                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1860                 .video_inputs   = 2,
1861                 .audio_inputs   = 0,
1862                 .tuner          = -1,
1863                 .svhs           = 1,
1864                 .muxsel         = { 0, 1 },
1865                 .pll            = PLL_28,
1866                 .tuner_type     = -1,
1867                 .tuner_addr     = ADDR_UNSET,
1868                 .radio_addr     = ADDR_UNSET,
1869                 .no_msp34xx     = 1,
1870                 .no_tda9875     = 1,
1871                 .no_tda7432     = 1,
1872         },
1873         [BTTV_BOARD_OSPREY2xx] = {
1874                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1875                 .video_inputs   = 1,
1876                 .audio_inputs   = 1,
1877                 .tuner          = -1,
1878                 .svhs           = -1,
1879                 .muxsel         = { 0 },
1880                 .pll            = PLL_28,
1881                 .tuner_type     = UNSET,
1882                 .tuner_addr     = ADDR_UNSET,
1883                 .radio_addr     = ADDR_UNSET,
1884                 .no_msp34xx     = 1,
1885                 .no_tda9875     = 1,
1886                 .no_tda7432     = 1,
1887         },
1888
1889                 /* ---- card 0x58 ---------------------------------- */
1890         [BTTV_BOARD_OSPREY2x0_SVID] = {
1891                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1892                 .video_inputs   = 2,
1893                 .audio_inputs   = 1,
1894                 .tuner          = -1,
1895                 .svhs           = 1,
1896                 .muxsel         = { 0, 1 },
1897                 .pll            = PLL_28,
1898                 .tuner_type     = UNSET,
1899                 .tuner_addr     = ADDR_UNSET,
1900                 .radio_addr     = ADDR_UNSET,
1901                 .no_msp34xx     = 1,
1902                 .no_tda9875     = 1,
1903                 .no_tda7432     = 1,
1904         },
1905         [BTTV_BOARD_OSPREY2x0] = {
1906                 .name           = "Osprey 210/220",   /* 0x1(A|B)-04C0-C1 */
1907                 .video_inputs   = 2,
1908                 .audio_inputs   = 1,
1909                 .tuner          = -1,
1910                 .svhs           = 1,
1911                 .muxsel         = { 2, 3 },
1912                 .pll            = PLL_28,
1913                 .tuner_type     = UNSET,
1914                 .tuner_addr     = ADDR_UNSET,
1915                 .radio_addr     = ADDR_UNSET,
1916                 .no_msp34xx     = 1,
1917                 .no_tda9875     = 1,
1918                 .no_tda7432     = 1,
1919         },
1920         [BTTV_BOARD_OSPREY500] = {
1921                 .name           = "Osprey 500",   /* 500 */
1922                 .video_inputs   = 2,
1923                 .audio_inputs   = 1,
1924                 .tuner          = -1,
1925                 .svhs           = 1,
1926                 .muxsel         = { 2, 3 },
1927                 .pll            = PLL_28,
1928                 .tuner_type     = -1,
1929                 .tuner_addr     = ADDR_UNSET,
1930                 .radio_addr     = ADDR_UNSET,
1931                 .no_msp34xx     = 1,
1932                 .no_tda9875     = 1,
1933                 .no_tda7432     = 1,
1934         },
1935         [BTTV_BOARD_OSPREY540] = {
1936                 .name           = "Osprey 540",   /* 540 */
1937                 .video_inputs   = 4,
1938                 .audio_inputs   = 1,
1939                 .tuner          = -1,
1940         #if 0 /* TODO ... */
1941                 .svhs           = OSPREY540_SVID_ANALOG,
1942                 .muxsel         = {       [OSPREY540_COMP_ANALOG] = 2,
1943                                         [OSPREY540_SVID_ANALOG] = 3, },
1944         #endif
1945                 .pll            = PLL_28,
1946                 .tuner_type     = -1,
1947                 .tuner_addr     = ADDR_UNSET,
1948                 .radio_addr     = ADDR_UNSET,
1949                 .no_msp34xx     = 1,
1950                 .no_tda9875     = 1,
1951                 .no_tda7432     = 1,
1952         #if 0 /* TODO ... */
1953                 .muxsel_hook    = osprey_540_muxsel,
1954                 .picture_hook   = osprey_540_set_picture,
1955         #endif
1956         },
1957
1958                 /* ---- card 0x5C ---------------------------------- */
1959         [BTTV_BOARD_OSPREY2000] = {
1960                 .name           = "Osprey 2000",  /* 2000 */
1961                 .video_inputs   = 2,
1962                 .audio_inputs   = 1,
1963                 .tuner          = -1,
1964                 .svhs           = 1,
1965                 .muxsel         = { 2, 3 },
1966                 .pll            = PLL_28,
1967                 .tuner_type     = UNSET,
1968                 .tuner_addr     = ADDR_UNSET,
1969                 .radio_addr     = ADDR_UNSET,
1970                 .no_msp34xx     = 1,
1971                 .no_tda9875     = 1,
1972                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1973         },
1974         [BTTV_BOARD_IDS_EAGLE] = {
1975                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1976                 .name           = "IDS Eagle",
1977                 .video_inputs   = 4,
1978                 .audio_inputs   = 0,
1979                 .tuner          = -1,
1980                 .tuner_type     = -1,
1981                 .tuner_addr     = ADDR_UNSET,
1982                 .radio_addr     = ADDR_UNSET,
1983                 .svhs           = -1,
1984                 .gpiomask       = 0,
1985                 .muxsel         = { 0, 1, 2, 3 },
1986                 .muxsel_hook    = eagle_muxsel,
1987                 .no_msp34xx     = 1,
1988                 .no_tda9875     = 1,
1989                 .pll            = PLL_28,
1990         },
1991         [BTTV_BOARD_PINNACLESAT] = {
1992                 .name           = "Pinnacle PCTV Sat",
1993                 .video_inputs   = 2,
1994                 .audio_inputs   = 0,
1995                 .svhs           = 1,
1996                 .tuner          = -1,
1997                 .tuner_type     = -1,
1998                 .tuner_addr     = ADDR_UNSET,
1999                 .radio_addr     = ADDR_UNSET,
2000                 .no_msp34xx     = 1,
2001                 .no_tda9875     = 1,
2002                 .no_tda7432     = 1,
2003                 .muxsel         = { 3, 0, 1, 2 },
2004                 .pll            = PLL_28,
2005                 .no_gpioirq     = 1,
2006                 .has_dvb        = 1,
2007         },
2008         [BTTV_BOARD_FORMAC_PROTV] = {
2009                 .name           = "Formac ProTV II (bt878)",
2010                 .video_inputs   = 4,
2011                 .audio_inputs   = 1,
2012                 .tuner          = 0,
2013                 .svhs           = 3,
2014                 .gpiomask       = 2,
2015                 /* TV, Comp1, Composite over SVID con, SVID */
2016                 .muxsel         = { 2, 3, 1, 1 },
2017                 .gpiomux        = { 2, 2, 0, 0 },
2018                 .pll            = PLL_28,
2019                 .has_radio      = 1,
2020                 .tuner_type     = TUNER_PHILIPS_PAL,
2021                 .tuner_addr     = ADDR_UNSET,
2022                 .radio_addr     = ADDR_UNSET,
2023         /* sound routing:
2024                 GPIO=0x00,0x01,0x03: mute (?)
2025                 0x02: both TV and radio (tuner: FM1216/I)
2026                 The card has onboard audio connectors labeled "cdrom" and "board",
2027                 not soldered here, though unknown wiring.
2028                 Card lacks: external audio in, pci subsystem id.
2029         */
2030         },
2031
2032                 /* ---- card 0x60 ---------------------------------- */
2033         [BTTV_BOARD_MACHTV] = {
2034                 .name           = "MachTV",
2035                 .video_inputs   = 3,
2036                 .audio_inputs   = 1,
2037                 .tuner          = 0,
2038                 .svhs           = -1,
2039                 .gpiomask       = 7,
2040                 .muxsel         = { 2, 3, 1, 1},
2041                 .gpiomux        = { 0, 1, 2, 3},
2042                 .gpiomute       = 4,
2043                 .needs_tvaudio  = 1,
2044                 .tuner_type     = 5,
2045                 .tuner_addr     = ADDR_UNSET,
2046                 .radio_addr     = ADDR_UNSET,
2047                 .pll            = PLL_28,
2048         },
2049         [BTTV_BOARD_EURESYS_PICOLO] = {
2050                 .name           = "Euresys Picolo",
2051                 .video_inputs   = 3,
2052                 .audio_inputs   = 0,
2053                 .tuner          = -1,
2054                 .svhs           = 2,
2055                 .gpiomask       = 0,
2056                 .no_msp34xx     = 1,
2057                 .no_tda9875     = 1,
2058                 .no_tda7432     = 1,
2059                 .muxsel         = { 2, 0, 1},
2060                 .pll            = PLL_28,
2061                 .tuner_type     = UNSET,
2062                 .tuner_addr     = ADDR_UNSET,
2063                 .radio_addr     = ADDR_UNSET,
2064         },
2065         [BTTV_BOARD_PV150] = {
2066                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2067                 .name           = "ProVideo PV150", /* 0x4f */
2068                 .video_inputs   = 2,
2069                 .audio_inputs   = 0,
2070                 .tuner          = -1,
2071                 .svhs           = -1,
2072                 .gpiomask       = 0,
2073                 .muxsel         = { 2, 3 },
2074                 .gpiomux        = { 0 },
2075                 .needs_tvaudio  = 0,
2076                 .no_msp34xx     = 1,
2077                 .pll            = PLL_28,
2078                 .tuner_type     = UNSET,
2079                 .tuner_addr     = ADDR_UNSET,
2080                 .radio_addr     = ADDR_UNSET,
2081         },
2082         [BTTV_BOARD_AD_TVK503] = {
2083                 /* Hiroshi Takekawa <sian@big.or.jp> */
2084                 /* This card lacks subsystem ID */
2085                 .name           = "AD-TVK503", /* 0x63 */
2086                 .video_inputs   = 4,
2087                 .audio_inputs   = 1,
2088                 .tuner          = 0,
2089                 .svhs           = 2,
2090                 .gpiomask       = 0x001e8007,
2091                 .muxsel         = { 2, 3, 1, 0 },
2092                 /*                  Tuner, Radio, external, internal, off,  on */
2093                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
2094                 .gpiomute       = 0x0f,
2095                 .needs_tvaudio  = 0,
2096                 .no_msp34xx     = 1,
2097                 .pll            = PLL_28,
2098                 .tuner_type     = 2,
2099                 .tuner_addr     = ADDR_UNSET,
2100                 .radio_addr     = ADDR_UNSET,
2101                 .audio_hook     = adtvk503_audio,
2102         },
2103
2104                 /* ---- card 0x64 ---------------------------------- */
2105         [BTTV_BOARD_HERCULES_SM_TV] = {
2106                 .name           = "Hercules Smart TV Stereo",
2107                 .video_inputs   = 4,
2108                 .audio_inputs   = 1,
2109                 .tuner          = 0,
2110                 .svhs           = 2,
2111                 .gpiomask       = 0x00,
2112                 .muxsel         = { 2, 3, 1, 1 },
2113                 .needs_tvaudio  = 1,
2114                 .no_msp34xx     = 1,
2115                 .pll            = PLL_28,
2116                 .tuner_type     = 5,
2117                 .tuner_addr     = ADDR_UNSET,
2118                 .radio_addr     = ADDR_UNSET,
2119                 /* Notes:
2120                 - card lacks subsystem ID
2121                 - stereo variant w/ daughter board with tda9874a @0xb0
2122                 - Audio Routing:
2123                         always from tda9874 independent of GPIO (?)
2124                         external line in: unknown
2125                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2126                         hef4053 (instead 4052) for unknown function
2127                 */
2128         },
2129         [BTTV_BOARD_PACETV] = {
2130                 .name           = "Pace TV & Radio Card",
2131                 .video_inputs   = 4,
2132                 .audio_inputs   = 1,
2133                 .tuner          = 0,
2134                 .svhs           = 2,
2135                 .muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2136                 .gpiomask       = 0,
2137                 .no_tda9875     = 1,
2138                 .no_tda7432     = 1,
2139                 .tuner_type     = 1,
2140                 .tuner_addr     = ADDR_UNSET,
2141                 .radio_addr     = ADDR_UNSET,
2142                 .has_radio      = 1,
2143                 .pll            = PLL_28,
2144                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2145                 only internal line out: (4pin header) RGGL
2146                 Radio must be decoded by msp3410d (not routed through)*/
2147                 /*
2148                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2149                 */
2150         },
2151         [BTTV_BOARD_IVC200] = {
2152                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2153                 .name           = "IVC-200",
2154                 .video_inputs   = 1,
2155                 .audio_inputs   = 0,
2156                 .tuner          = -1,
2157                 .tuner_type     = -1,
2158                 .tuner_addr     = ADDR_UNSET,
2159                 .radio_addr     = ADDR_UNSET,
2160                 .svhs           = -1,
2161                 .gpiomask       = 0xdf,
2162                 .muxsel         = { 2 },
2163                 .pll            = PLL_28,
2164         },
2165         [BTTV_BOARD_XGUARD] = {
2166                 .name           = "Grand X-Guard / Trust 814PCI",
2167                 .video_inputs   = 16,
2168                 .audio_inputs   = 0,
2169                 .tuner          = -1,
2170                 .svhs           = -1,
2171                 .tuner_type     = 4,
2172                 .tuner_addr     = ADDR_UNSET,
2173                 .radio_addr     = ADDR_UNSET,
2174                 .gpiomask2      = 0xff,
2175                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2176                 .muxsel_hook    = xguard_muxsel,
2177                 .no_msp34xx     = 1,
2178                 .no_tda9875     = 1,
2179                 .no_tda7432     = 1,
2180                 .pll            = PLL_28,
2181         },
2182
2183                 /* ---- card 0x68 ---------------------------------- */
2184         [BTTV_BOARD_NEBULA_DIGITV] = {
2185                 .name           = "Nebula Electronics DigiTV",
2186                 .video_inputs   = 1,
2187                 .tuner          = -1,
2188                 .svhs           = -1,
2189                 .muxsel         = { 2, 3, 1, 0 },
2190                 .no_msp34xx     = 1,
2191                 .no_tda9875     = 1,
2192                 .no_tda7432     = 1,
2193                 .pll            = PLL_28,
2194                 .tuner_type     = -1,
2195                 .tuner_addr     = ADDR_UNSET,
2196                 .radio_addr     = ADDR_UNSET,
2197                 .has_dvb        = 1,
2198                 .has_remote     = 1,
2199                 .gpiomask       = 0x1b,
2200                 .no_gpioirq     = 1,
2201         },
2202         [BTTV_BOARD_PV143] = {
2203                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2204                 .name           = "ProVideo PV143",
2205                 .video_inputs   = 4,
2206                 .audio_inputs   = 0,
2207                 .tuner          = -1,
2208                 .svhs           = -1,
2209                 .gpiomask       = 0,
2210                 .muxsel         = { 2, 3, 1, 0 },
2211                 .gpiomux        = { 0 },
2212                 .needs_tvaudio  = 0,
2213                 .no_msp34xx     = 1,
2214                 .pll            = PLL_28,
2215                 .tuner_type     = -1,
2216                 .tuner_addr     = ADDR_UNSET,
2217                 .radio_addr     = ADDR_UNSET,
2218         },
2219         [BTTV_BOARD_VD009X1_MINIDIN] = {
2220                 /* M.Klahr@phytec.de */
2221                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2222                 .video_inputs   = 4,
2223                 .audio_inputs   = 0,
2224                 .tuner          = -1, /* card has no tuner */
2225                 .svhs           = 3,
2226                 .gpiomask       = 0x00,
2227                 .muxsel         = { 2, 3, 1, 0 },
2228                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2229                 .needs_tvaudio  = 1,
2230                 .pll            = PLL_28,
2231                 .tuner_type     = -1,
2232                 .tuner_addr     = ADDR_UNSET,
2233                 .radio_addr     = ADDR_UNSET,
2234         },
2235         [BTTV_BOARD_VD009X1_COMBI] = {
2236                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2237                 .video_inputs   = 4,
2238                 .audio_inputs   = 0,
2239                 .tuner          = -1, /* card has no tuner */
2240                 .svhs           = 3,
2241                 .gpiomask       = 0x00,
2242                 .muxsel         = { 2, 3, 1, 1 },
2243                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2244                 .needs_tvaudio  = 1,
2245                 .pll            = PLL_28,
2246                 .tuner_type     = -1,
2247                 .tuner_addr     = ADDR_UNSET,
2248                 .radio_addr     = ADDR_UNSET,
2249         },
2250
2251                 /* ---- card 0x6c ---------------------------------- */
2252         [BTTV_BOARD_VD009_MINIDIN] = {
2253                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2254                 .video_inputs   = 10,
2255                 .audio_inputs   = 0,
2256                 .tuner          = -1, /* card has no tuner */
2257                 .svhs           = 9,
2258                 .gpiomask       = 0x00,
2259                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2260                                         via the upper nibble of muxsel. here: used for
2261                                         xternal video-mux */
2262                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2263                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2264                 .needs_tvaudio  = 1,
2265                 .pll            = PLL_28,
2266                 .tuner_type     = -1,
2267                 .tuner_addr     = ADDR_UNSET,
2268                 .radio_addr     = ADDR_UNSET,
2269         },
2270         [BTTV_BOARD_VD009_COMBI] = {
2271                 .name           = "PHYTEC VD-009 Combi (bt878)",
2272                 .video_inputs   = 10,
2273                 .audio_inputs   = 0,
2274                 .tuner          = -1, /* card has no tuner */
2275                 .svhs           = 9,
2276                 .gpiomask       = 0x00,
2277                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2278                                         via the upper nibble of muxsel. here: used for
2279                                         xternal video-mux */
2280                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2281                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2282                 .needs_tvaudio  = 1,
2283                 .pll            = PLL_28,
2284                 .tuner_type     = -1,
2285                 .tuner_addr     = ADDR_UNSET,
2286                 .radio_addr     = ADDR_UNSET,
2287         },
2288         [BTTV_BOARD_IVC100] = {
2289                 .name           = "IVC-100",
2290                 .video_inputs   = 4,
2291                 .audio_inputs   = 0,
2292                 .tuner          = -1,
2293                 .tuner_type     = -1,
2294                 .tuner_addr     = ADDR_UNSET,
2295                 .radio_addr     = ADDR_UNSET,
2296                 .svhs           = -1,
2297                 .gpiomask       = 0xdf,
2298                 .muxsel         = { 2, 3, 1, 0 },
2299                 .pll            = PLL_28,
2300         },
2301         [BTTV_BOARD_IVC120] = {
2302                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2303                 .name           = "IVC-120G",
2304                 .video_inputs   = 16,
2305                 .audio_inputs   = 0,    /* card has no audio */
2306                 .tuner          = -1,   /* card has no tuner */
2307                 .tuner_type     = -1,
2308                 .tuner_addr     = ADDR_UNSET,
2309                 .radio_addr     = ADDR_UNSET,
2310                 .svhs           = -1,   /* card has no svhs */
2311                 .needs_tvaudio  = 0,
2312                 .no_msp34xx     = 1,
2313                 .no_tda9875     = 1,
2314                 .no_tda7432     = 1,
2315                 .gpiomask       = 0x00,
2316                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2317                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2318                 .muxsel_hook    = ivc120_muxsel,
2319                 .pll            = PLL_28,
2320         },
2321
2322                 /* ---- card 0x70 ---------------------------------- */
2323         [BTTV_BOARD_PC_HDTV] = {
2324                 .name           = "pcHDTV HD-2000 TV",
2325                 .video_inputs   = 4,
2326                 .audio_inputs   = 1,
2327                 .tuner          = 0,
2328                 .svhs           = 2,
2329                 .muxsel         = { 2, 3, 1, 0 },
2330                 .tuner_type     = TUNER_PHILIPS_ATSC,
2331                 .tuner_addr     = ADDR_UNSET,
2332                 .radio_addr     = ADDR_UNSET,
2333                 .has_dvb        = 1,
2334         },
2335         [BTTV_BOARD_TWINHAN_DST] = {
2336                 .name           = "Twinhan DST + clones",
2337                 .no_msp34xx     = 1,
2338                 .no_tda9875     = 1,
2339                 .no_tda7432     = 1,
2340                 .tuner_type     = TUNER_ABSENT,
2341                 .tuner_addr     = ADDR_UNSET,
2342                 .radio_addr     = ADDR_UNSET,
2343                 .no_video       = 1,
2344                 .has_dvb        = 1,
2345         },
2346         [BTTV_BOARD_WINFASTVC100] = {
2347                 .name           = "Winfast VC100",
2348                 .video_inputs   = 3,
2349                 .audio_inputs   = 0,
2350                 .svhs           = 1,
2351                 .tuner          = -1,
2352                 .muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2353                 .no_msp34xx     = 1,
2354                 .no_tda9875     = 1,
2355                 .no_tda7432     = 1,
2356                 .tuner_type     = TUNER_ABSENT,
2357                 .tuner_addr     = ADDR_UNSET,
2358                 .radio_addr     = ADDR_UNSET,
2359                 .pll            = PLL_28,
2360         },
2361         [BTTV_BOARD_TEV560] = {
2362                 .name           = "Teppro TEV-560/InterVision IV-560",
2363                 .video_inputs   = 3,
2364                 .audio_inputs   = 1,
2365                 .tuner          = 0,
2366                 .svhs           = 2,
2367                 .gpiomask       = 3,
2368                 .muxsel         = { 2, 3, 1, 1 },
2369                 .gpiomux        = { 1, 1, 1, 1 },
2370                 .needs_tvaudio  = 1,
2371                 .tuner_type     = TUNER_PHILIPS_PAL,
2372                 .tuner_addr     = ADDR_UNSET,
2373                 .radio_addr     = ADDR_UNSET,
2374                 .pll            = PLL_35,
2375         },
2376
2377                 /* ---- card 0x74 ---------------------------------- */
2378         [BTTV_BOARD_SIMUS_GVC1100] = {
2379                 .name           = "SIMUS GVC1100",
2380                 .video_inputs   = 4,
2381                 .audio_inputs   = 0,
2382                 .tuner          = -1,
2383                 .svhs           = -1,
2384                 .tuner_type     = -1,
2385                 .tuner_addr     = ADDR_UNSET,
2386                 .radio_addr     = ADDR_UNSET,
2387                 .pll            = PLL_28,
2388                 .muxsel         = { 2, 2, 2, 2 },
2389                 .gpiomask       = 0x3F,
2390                 .muxsel_hook    = gvc1100_muxsel,
2391         },
2392         [BTTV_BOARD_NGSTV_PLUS] = {
2393                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2394                 .name           = "NGS NGSTV+",
2395                 .video_inputs   = 3,
2396                 .tuner          = 0,
2397                 .svhs           = 2,
2398                 .gpiomask       = 0x008007,
2399                 .muxsel         = { 2, 3, 0, 0 },
2400                 .gpiomux        = { 0, 0, 0, 0 },
2401                 .gpiomute       = 0x000003,
2402                 .pll            = PLL_28,
2403                 .tuner_type     = TUNER_PHILIPS_PAL,
2404                 .tuner_addr     = ADDR_UNSET,
2405                 .radio_addr     = ADDR_UNSET,
2406                 .has_remote     = 1,
2407         },
2408         [BTTV_BOARD_LMLBT4] = {
2409                 /* http://linuxmedialabs.com */
2410                 .name           = "LMLBT4",
2411                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2412                 .audio_inputs   = 0,
2413                 .tuner          = -1,
2414                 .svhs           = -1,
2415                 .muxsel         = { 2, 3, 1, 0 },
2416                 .no_msp34xx     = 1,
2417                 .no_tda9875     = 1,
2418                 .no_tda7432     = 1,
2419                 .needs_tvaudio  = 0,
2420                 .tuner_type     = -1,
2421                 .tuner_addr     = ADDR_UNSET,
2422                 .radio_addr     = ADDR_UNSET,
2423         },
2424         [BTTV_BOARD_TEKRAM_M205] = {
2425                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2426                 .name           = "Tekram M205 PRO",
2427                 .video_inputs   = 3,
2428                 .audio_inputs   = 1,
2429                 .tuner          = 0,
2430                 .tuner_type     = TUNER_PHILIPS_PAL,
2431                 .tuner_addr     = ADDR_UNSET,
2432                 .radio_addr     = ADDR_UNSET,
2433                 .svhs           = 2,
2434                 .needs_tvaudio  = 0,
2435                 .gpiomask       = 0x68,
2436                 .muxsel         = { 2, 3, 1 },
2437                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2438                 .pll            = PLL_28,
2439         },
2440
2441                 /* ---- card 0x78 ---------------------------------- */
2442         [BTTV_BOARD_CONTVFMI] = {
2443                 /* Javier Cendan Ares <jcendan@lycos.es> */
2444                 /* bt878 TV + FM without subsystem ID */
2445                 .name           = "Conceptronic CONTVFMi",
2446                 .video_inputs   = 3,
2447                 .audio_inputs   = 1,
2448                 .tuner          = 0,
2449                 .svhs           = 2,
2450                 .gpiomask       = 0x008007,
2451                 .muxsel         = { 2, 3, 1, 1 },
2452                 .gpiomux        = { 0, 1, 2, 2 },
2453                 .gpiomute       = 3,
2454                 .needs_tvaudio  = 0,
2455                 .pll            = PLL_28,
2456                 .tuner_type     = TUNER_PHILIPS_PAL,
2457                 .tuner_addr     = ADDR_UNSET,
2458                 .radio_addr     = ADDR_UNSET,
2459                 .has_remote     = 1,
2460                 .has_radio      = 1,
2461         },
2462         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2463                 /*Eric DEBIEF <debief@telemsa.com>*/
2464                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2465                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2466                 /*0x79 in bttv.h*/
2467                 .name           = "Euresys Picolo Tetra",
2468                 .video_inputs   = 4,
2469                 .audio_inputs   = 0,
2470                 .tuner          = -1,
2471                 .svhs           = -1,
2472                 .gpiomask       = 0,
2473                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2474                 .no_msp34xx     = 1,
2475                 .no_tda9875     = 1,
2476                 .no_tda7432     = 1,
2477                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2478                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2479                 .pll            = PLL_28,
2480                 .needs_tvaudio  = 0,
2481                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2482                 .tuner_type     = -1,
2483                 .tuner_addr     = ADDR_UNSET,
2484                 .radio_addr     = ADDR_UNSET,
2485         },
2486         [BTTV_BOARD_SPIRIT_TV] = {
2487                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2488                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2489                 .name           = "Spirit TV Tuner",
2490                 .video_inputs   = 3,
2491                 .audio_inputs   = 1,
2492                 .tuner          = 0,
2493                 .svhs           = 2,
2494                 .gpiomask       = 0x0000000f,
2495                 .muxsel         = { 2, 1, 1 },
2496                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2497                 .tuner_type     = TUNER_TEMIC_PAL,
2498                 .tuner_addr     = ADDR_UNSET,
2499                 .radio_addr     = ADDR_UNSET,
2500                 .no_msp34xx     = 1,
2501                 .no_tda9875     = 1,
2502         },
2503         [BTTV_BOARD_AVDVBT_771] = {
2504                 /* Wolfram Joost <wojo@frokaschwei.de> */
2505                 .name           = "AVerMedia AVerTV DVB-T 771",
2506                 .video_inputs   = 2,
2507                 .svhs           = 1,
2508                 .tuner          = -1,
2509                 .tuner_type     = TUNER_ABSENT,
2510                 .tuner_addr     = ADDR_UNSET,
2511                 .radio_addr     = ADDR_UNSET,
2512                 .muxsel         = { 3 , 3 },
2513                 .no_msp34xx     = 1,
2514                 .no_tda9875     = 1,
2515                 .no_tda7432     = 1,
2516                 .pll            = PLL_28,
2517                 .has_dvb        = 1,
2518                 .no_gpioirq     = 1,
2519                 .has_remote     = 1,
2520         },
2521                 /* ---- card 0x7c ---------------------------------- */
2522         [BTTV_BOARD_AVDVBT_761] = {
2523                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2524                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2525                 .name           = "AverMedia AverTV DVB-T 761",
2526                 .video_inputs   = 2,
2527                 .tuner          = -1,
2528                 .svhs           = 1,
2529                 .muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2530                 .no_msp34xx     = 1,
2531                 .no_tda9875     = 1,
2532                 .no_tda7432     = 1,
2533                 .pll            = PLL_28,
2534                 .tuner_type     = -1,
2535                 .tuner_addr     = ADDR_UNSET,
2536                 .radio_addr     = ADDR_UNSET,
2537                 .has_dvb        = 1,
2538                 .no_gpioirq     = 1,
2539                 .has_remote     = 1,
2540         },
2541         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2542                 /* andre.schwarz@matrix-vision.de */
2543                 .name             = "MATRIX Vision Sigma-SQ",
2544                 .video_inputs     = 16,
2545                 .audio_inputs     = 0,
2546                 .tuner            = -1,
2547                 .svhs             = -1,
2548                 .gpiomask         = 0x0,
2549                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2550                                 3, 3, 3, 3, 3, 3, 3, 3 },
2551                 .muxsel_hook      = sigmaSQ_muxsel,
2552                 .gpiomux          = { 0 },
2553                 .no_msp34xx       = 1,
2554                 .pll              = PLL_28,
2555                 .tuner_type       = -1,
2556                 .tuner_addr       = ADDR_UNSET,
2557                 .radio_addr     = ADDR_UNSET,
2558         },
2559         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2560                 /* andre.schwarz@matrix-vision.de */
2561                 .name             = "MATRIX Vision Sigma-SLC",
2562                 .video_inputs     = 4,
2563                 .audio_inputs     = 0,
2564                 .tuner            = -1,
2565                 .svhs             = -1,
2566                 .gpiomask         = 0x0,
2567                 .muxsel           = { 2, 2, 2, 2 },
2568                 .muxsel_hook      = sigmaSLC_muxsel,
2569                 .gpiomux          = { 0 },
2570                 .no_msp34xx       = 1,
2571                 .pll              = PLL_28,
2572                 .tuner_type       = -1,
2573                 .tuner_addr       = ADDR_UNSET,
2574                 .radio_addr     = ADDR_UNSET,
2575         },
2576                 /* BTTV_BOARD_APAC_VIEWCOMP */
2577         [BTTV_BOARD_APAC_VIEWCOMP] = {
2578                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2579                 /* bt878 TV + FM 0x00000000 subsystem ID */
2580                 .name           = "APAC Viewcomp 878(AMAX)",
2581                 .video_inputs   = 2,
2582                 .audio_inputs   = 1,
2583                 .tuner          = 0,
2584                 .svhs           = -1,
2585                 .gpiomask       = 0xFF,
2586                 .muxsel         = { 2, 3, 1, 1 },
2587                 .gpiomux        = { 2, 0, 0, 0 },
2588                 .gpiomute       = 10,
2589                 .needs_tvaudio  = 0,
2590                 .pll            = PLL_28,
2591                 .tuner_type     = TUNER_PHILIPS_PAL,
2592                 .tuner_addr     = ADDR_UNSET,
2593                 .radio_addr     = ADDR_UNSET,
2594                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2595                 .has_radio      = 1,   /* not every card has radio */
2596         },
2597
2598                 /* ---- card 0x80 ---------------------------------- */
2599         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2600                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2601                 .name           = "DViCO FusionHDTV DVB-T Lite",
2602                 .tuner          = -1,
2603                 .no_msp34xx     = 1,
2604                 .no_tda9875     = 1,
2605                 .no_tda7432     = 1,
2606                 .pll            = PLL_28,
2607                 .no_video       = 1,
2608                 .has_dvb        = 1,
2609                 .tuner_type     = -1,
2610                 .tuner_addr     = ADDR_UNSET,
2611                 .radio_addr     = ADDR_UNSET,
2612         },
2613         [BTTV_BOARD_VGEAR_MYVCD] = {
2614                 /* Steven <photon38@pchome.com.tw> */
2615                 .name           = "V-Gear MyVCD",
2616                 .video_inputs   = 3,
2617                 .audio_inputs   = 1,
2618                 .tuner          = 0,
2619                 .svhs           = 2,
2620                 .gpiomask       = 0x3f,
2621                 .muxsel         = {2, 3, 1, 0 },
2622                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2623                 .gpiomute       = 0x31,
2624                 .no_msp34xx     = 1,
2625                 .pll            = PLL_28,
2626                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2627                 .tuner_addr     = ADDR_UNSET,
2628                 .radio_addr     = ADDR_UNSET,
2629                 .has_radio      = 0,
2630         #if 0
2631                 .has_remote     = 1,
2632         #endif
2633         },
2634         [BTTV_BOARD_SUPER_TV] = {
2635                 /* Rick C <cryptdragoon@gmail.com> */
2636                 .name           = "Super TV Tuner",
2637                 .video_inputs   = 4,
2638                 .audio_inputs   = 1,
2639                 .tuner          = 0,
2640                 .svhs           = 2,
2641                 .muxsel         = { 2, 3, 1, 0 },
2642                 .tuner_type     = TUNER_PHILIPS_NTSC,
2643                 .tuner_addr     = ADDR_UNSET,
2644                 .radio_addr     = ADDR_UNSET,
2645                 .gpiomask       = 0x008007,
2646                 .gpiomux        = { 0, 0x000001,0,0 },
2647                 .needs_tvaudio  = 1,
2648                 .has_radio      = 1,
2649         },
2650         [BTTV_BOARD_TIBET_CS16] = {
2651                 /* Chris Fanning <video4linux@haydon.net> */
2652                 .name           = "Tibet Systems 'Progress DVR' CS16",
2653                 .video_inputs   = 16,
2654                 .audio_inputs   = 0,
2655                 .tuner          = -1,
2656                 .svhs           = -1,
2657                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2658                 .pll            = PLL_28,
2659                 .no_msp34xx     = 1,
2660                 .no_tda9875     = 1,
2661                 .no_tda7432     = 1,
2662                 .tuner_type     = -1,
2663                 .tuner_addr     = ADDR_UNSET,
2664                 .radio_addr     = ADDR_UNSET,
2665                 .muxsel_hook    = tibetCS16_muxsel,
2666         },
2667         [BTTV_BOARD_KODICOM_4400R] = {
2668                 /* Bill Brack <wbrack@mmm.com.hk> */
2669                 /*
2670                 * Note that, because of the card's wiring, the "master"
2671                 * BT878A chip (i.e. the one which controls the analog switch
2672                 * and must use this card type) is the 2nd one detected.  The
2673                 * other 3 chips should use card type 0x85, whose description
2674                 * follows this one.  There is a EEPROM on the card (which is
2675                 * connected to the I2C of one of those other chips), but is
2676                 * not currently handled.  There is also a facility for a
2677                 * "monitor", which is also not currently implemented.
2678                 */
2679                 .name           = "Kodicom 4400R (master)",
2680                 .video_inputs   = 16,
2681                 .audio_inputs   = 0,
2682                 .tuner          = -1,
2683                 .tuner_type     = -1,
2684                 .tuner_addr     = ADDR_UNSET,
2685                 .radio_addr     = ADDR_UNSET,
2686                 .svhs           = -1,
2687                 /* GPIO bits 0-9 used for analog switch:
2688                 *   00 - 03:    camera selector
2689                 *   04 - 06:    channel (controller) selector
2690                 *   07: data (1->on, 0->off)
2691                 *   08: strobe
2692                 *   09: reset
2693                 * bit 16 is input from sync separator for the channel
2694                 */
2695                 .gpiomask       = 0x0003ff,
2696                 .no_gpioirq     = 1,
2697                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2698                 .pll            = PLL_28,
2699                 .no_msp34xx     = 1,
2700                 .no_tda7432     = 1,
2701                 .no_tda9875     = 1,
2702                 .muxsel_hook    = kodicom4400r_muxsel,
2703         },
2704         [BTTV_BOARD_KODICOM_4400R_SL] = {
2705                 /* Bill Brack <wbrack@mmm.com.hk> */
2706                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2707                 * one which controls the analog switch, and must use the card type)
2708                 * is the 2nd one detected.  The other 3 chips should use this card
2709                 * type
2710                 */
2711                 .name           = "Kodicom 4400R (slave)",
2712                 .video_inputs   = 16,
2713                 .audio_inputs   = 0,
2714                 .tuner          = -1,
2715                 .tuner_type     = -1,
2716                 .tuner_addr     = ADDR_UNSET,
2717                 .radio_addr     = ADDR_UNSET,
2718                 .svhs           = -1,
2719                 .gpiomask       = 0x010000,
2720                 .no_gpioirq     = 1,
2721                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2722                 .pll            = PLL_28,
2723                 .no_msp34xx     = 1,
2724                 .no_tda7432     = 1,
2725                 .no_tda9875     = 1,
2726                 .muxsel_hook    = kodicom4400r_muxsel,
2727         },
2728                 /* ---- card 0x86---------------------------------- */
2729         [BTTV_BOARD_ADLINK_RTV24] = {
2730                 /* Michael Henson <mhenson@clarityvi.com> */
2731                 /* Adlink RTV24 with special unlock codes */
2732                 .name           = "Adlink RTV24",
2733                 .video_inputs   = 4,
2734                 .audio_inputs   = 1,
2735                 .tuner          = 0,
2736                 .svhs           = 2,
2737                 .muxsel         = { 2, 3, 1, 0 },
2738                 .tuner_type     = -1,
2739                 .tuner_addr     = ADDR_UNSET,
2740                 .radio_addr     = ADDR_UNSET,
2741                 .pll            = PLL_28,
2742         },
2743                 /* ---- card 0x87---------------------------------- */
2744         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2745                 /* Michael Krufky <mkrufky@m1k.net> */
2746                 .name           = "DViCO FusionHDTV 5 Lite",
2747                 .tuner          = 0,
2748                 .tuner_type     = TUNER_LG_TDVS_H062F,
2749                 .tuner_addr     = ADDR_UNSET,
2750                 .radio_addr     = ADDR_UNSET,
2751                 .video_inputs   = 3,
2752                 .audio_inputs   = 1,
2753                 .svhs           = 2,
2754                 .muxsel         = { 2, 3, 1 },
2755                 .gpiomask       = 0x00e00007,
2756                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2757                 .gpiomute       = 0x00c00007,
2758                 .no_msp34xx     = 1,
2759                 .no_tda9875     = 1,
2760                 .no_tda7432     = 1,
2761                 .has_dvb        = 1,
2762         },
2763                 /* ---- card 0x88---------------------------------- */
2764         [BTTV_BOARD_ACORP_Y878F] = {
2765                 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2766                 .name           = "Acorp Y878F",
2767                 .video_inputs   = 3,
2768                 .audio_inputs   = 1,
2769                 .tuner          = 0,
2770                 .svhs           = 2,
2771                 .gpiomask       = 0x01fe00,
2772                 .muxsel         = { 2, 3, 1, 1 },
2773                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2774                 .gpiomute       = 0x002000,
2775                 .needs_tvaudio  = 1,
2776                 .pll            = PLL_28,
2777                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2778                 .tuner_addr     = 0xc1 >>1,
2779                 .radio_addr     = 0xc1 >>1,
2780                 .has_radio      = 1,
2781         },
2782                 /* ---- card 0x89 ---------------------------------- */
2783         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2784                 .name           = "Conceptronic CTVFMi v2",
2785                 .video_inputs   = 3,
2786                 .audio_inputs   = 1,
2787                 .tuner          = 0,
2788                 .svhs           = 2,
2789                 .gpiomask       = 0x001c0007,
2790                 .muxsel         = { 2, 3, 1, 1 },
2791                 .gpiomux        = { 0, 1, 2, 2 },
2792                 .gpiomute       = 3,
2793                 .needs_tvaudio  = 0,
2794                 .pll            = PLL_28,
2795                 .tuner_type     = TUNER_TENA_9533_DI,
2796                 .tuner_addr     = ADDR_UNSET,
2797                 .radio_addr     = ADDR_UNSET,
2798                 .has_remote     = 1,
2799                 .has_radio      = 1,
2800         },
2801                 /* ---- card 0x8a ---------------------------------- */
2802         [BTTV_BOARD_PV_BT878P_2E] = {
2803                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2804                 .video_inputs  = 5,
2805                 .audio_inputs  = 1,
2806                 .tuner         = 0,
2807                 .svhs          = 3,
2808                 .gpiomask      = 0x01fe00,
2809                 .muxsel        = { 2,3,1,1,-1 },
2810                 .digital_mode  = DIGITAL_MODE_CAMERA,
2811                 .gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
2812                 .gpiomute      = 0x12400,
2813                 .no_msp34xx    = 1,
2814                 .pll           = PLL_28,
2815                 .tuner_type    = TUNER_LG_PAL_FM,
2816                 .tuner_addr     = ADDR_UNSET,
2817                 .radio_addr     = ADDR_UNSET,
2818                 .has_remote    = 1,
2819         },
2820                 /* ---- card 0x8b ---------------------------------- */
2821         [BTTV_BOARD_PV_M4900] = {
2822                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2823                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2824                 .video_inputs   = 3,
2825                 .audio_inputs   = 1,
2826                 .tuner          = 0,
2827                 .svhs           = 2,
2828                 .gpiomask       = 0x3f,
2829                 .muxsel         = { 2, 3, 1, 1 },
2830                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2831                 .gpiomute       = 0x29,
2832                 .no_msp34xx     = 1,
2833                 .pll            = PLL_28,
2834                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2835                 .tuner_addr     = ADDR_UNSET,
2836                 .radio_addr     = ADDR_UNSET,
2837                 .has_radio      = 1,
2838                 .has_remote     = 1,
2839         },
2840                 /* ---- card 0x8c ---------------------------------- */
2841         [BTTV_BOARD_OSPREY440]  = {
2842                 .name           = "Osprey 440",
2843                 .video_inputs   = 1,
2844                 .audio_inputs   = 1,
2845                 .tuner          = -1,
2846                 .svhs           = 1,
2847                 .muxsel         = { 2 },
2848                 .pll            = PLL_28,
2849                 .tuner_type     = UNSET,
2850                 .tuner_addr     = ADDR_UNSET,
2851                 .radio_addr     = ADDR_UNSET,
2852                 .no_msp34xx     = 1,
2853                 .no_tda9875     = 1,
2854                 .no_tda7432     = 1,
2855         },
2856                 /* ---- card 0x8d ---------------------------------- */
2857         [BTTV_BOARD_ASOUND_SKYEYE] = {
2858                 .name           = "Asound Skyeye PCTV",
2859                 .video_inputs   = 3,
2860                 .audio_inputs   = 1,
2861                 .tuner          = 0,
2862                 .svhs           = 2,
2863                 .gpiomask       = 15,
2864                 .muxsel         = { 2, 3, 1, 1 },
2865                 .gpiomux        = { 2, 0, 0, 0 },
2866                 .gpiomute       = 1,
2867                 .needs_tvaudio  = 1,
2868                 .pll            = PLL_28,
2869                 .tuner_type     = 2,
2870                 .tuner_addr     = ADDR_UNSET,
2871                 .radio_addr     = ADDR_UNSET,
2872         },
2873                 /* ---- card 0x8e ---------------------------------- */
2874         [BTTV_BOARD_SABRENT_TVFM] = {
2875                 .name           = "Sabrent TV-FM (bttv version)",
2876                 .video_inputs   = 3,
2877                 .audio_inputs   = 1,
2878                 .tuner          = 0,
2879                 .svhs           = 2,
2880                 .gpiomask       = 0x108007,
2881                 .muxsel         = { 2, 3, 1, 1 },
2882                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2883                 .no_msp34xx     = 1,
2884                 .no_tda9875     = 1,
2885                 .no_tda7432     = 1,
2886                 .pll            = PLL_28,
2887                 .tuner_type     = TUNER_TNF_5335MF,
2888                 .tuner_addr     = ADDR_UNSET,
2889                 .has_radio      = 1,
2890         },
2891         /* ---- card 0x8f ---------------------------------- */
2892         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2893                 .name           = "Hauppauge ImpactVCB (bt878)",
2894                 .video_inputs   = 4,
2895                 .audio_inputs   = 0,
2896                 .tuner          = -1,
2897                 .svhs           = -1,
2898                 .gpiomask       = 0x0f, /* old: 7 */
2899                 .muxsel         = { 0, 1, 3, 2 }, /* Composite 0-3 */
2900                 .no_msp34xx     = 1,
2901                 .no_tda9875     = 1,
2902                 .no_tda7432     = 1,
2903                 .tuner_type     = -1,
2904                 .tuner_addr     = ADDR_UNSET,
2905                 .radio_addr     = ADDR_UNSET,
2906         },
2907         [BTTV_BOARD_MACHTV_MAGICTV] = {
2908                 /* Julian Calaby <julian.calaby@gmail.com>
2909                  * Slightly different from original MachTV definition (0x60)
2910
2911                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2912                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2913                  * properly (methinks) causing no keyup bits being set */
2914
2915                 .name           = "MagicTV", /* rebranded MachTV */
2916                 .video_inputs   = 3,
2917                 .audio_inputs   = 1,
2918                 .tuner          = 0,
2919                 .svhs           = 2,
2920                 .gpiomask       = 7,
2921                 .muxsel         = { 2, 3, 1, 1 },
2922                 .gpiomux        = { 0, 1, 2, 3 },
2923                 .gpiomute       = 4,
2924                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2925                 .tuner_addr     = ADDR_UNSET,
2926                 .radio_addr     = ADDR_UNSET,
2927                 .pll            = PLL_28,
2928                 .has_radio      = 1,
2929                 .has_remote     = 1,
2930         },
2931 };
2932
2933 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2934
2935 /* ----------------------------------------------------------------------- */
2936
2937 static unsigned char eeprom_data[256];
2938
2939 /*
2940  * identify card
2941  */
2942 void __devinit bttv_idcard(struct bttv *btv)
2943 {
2944         unsigned int gpiobits;
2945         int i,type;
2946         unsigned short tmp;
2947
2948         /* read PCI subsystem ID */
2949         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2950         btv->cardid = tmp << 16;
2951         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2952         btv->cardid |= tmp;
2953
2954         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2955                 /* look for the card */
2956                 for (type = -1, i = 0; cards[i].id != 0; i++)
2957                         if (cards[i].id  == btv->cardid)
2958                                 type = i;
2959
2960                 if (type != -1) {
2961                         /* found it */
2962                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2963                                "PCI subsystem ID is %04x:%04x\n",
2964                                btv->c.nr,cards[type].name,cards[type].cardnr,
2965                                btv->cardid & 0xffff,
2966                                (btv->cardid >> 16) & 0xffff);
2967                         btv->c.type = cards[type].cardnr;
2968                 } else {
2969                         /* 404 */
2970                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2971                                btv->c.nr, btv->cardid & 0xffff,
2972                                (btv->cardid >> 16) & 0xffff);
2973                         printk(KERN_DEBUG "please mail id, board name and "
2974                                "the correct card= insmod option to video4linux-list@redhat.com\n");
2975                 }
2976         }
2977
2978         /* let the user override the autodetected type */
2979         if (card[btv->c.nr] < bttv_num_tvcards)
2980                 btv->c.type=card[btv->c.nr];
2981
2982         /* print which card config we are using */
2983         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2984                bttv_tvcards[btv->c.type].name, btv->c.type,
2985                card[btv->c.nr] < bttv_num_tvcards
2986                ? "insmod option" : "autodetected");
2987
2988         /* overwrite gpio stuff ?? */
2989         if (UNSET == audioall && UNSET == audiomux[0])
2990                 return;
2991
2992         if (UNSET != audiomux[0]) {
2993                 gpiobits = 0;
2994                 for (i = 0; i < 4; i++) {
2995                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2996                         gpiobits |= audiomux[i];
2997                 }
2998         } else {
2999                 gpiobits = audioall;
3000                 for (i = 0; i < 4; i++) {
3001                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3002                 }
3003         }
3004         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3005         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3006                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3007         for (i = 0; i < 5; i++) {
3008                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3009         }
3010         printk("\n");
3011 }
3012
3013 /*
3014  * (most) board specific initialisations goes here
3015  */
3016
3017 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3018 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3019 {
3020         int type = -1;
3021
3022         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3023                 type = BTTV_BOARD_MODTEC_205;
3024         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3025                 type = BTTV_BOARD_EURESYS_PICOLO;
3026         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3027                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3028
3029         if (-1 != type) {
3030                 btv->c.type = type;
3031                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3032                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3033         }
3034 }
3035
3036 static void flyvideo_gpio(struct bttv *btv)
3037 {
3038         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3039         int tuner=-1,ttype;
3040
3041         gpio_inout(0xffffff, 0);
3042         udelay(8);  /* without this we would see the 0x1800 mask */
3043         gpio = gpio_read();
3044         /* FIXME: must restore OUR_EN ??? */
3045
3046         /* all cards provide GPIO info, some have an additional eeprom
3047          * LR50: GPIO coding can be found lower right CP1 .. CP9
3048          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3049          *       GPIO14-12: n.c.
3050          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3051
3052          * lowest 3 bytes are remote control codes (no handshake needed)
3053          * xxxFFF: No remote control chip soldered
3054          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3055          * Note: Some bits are Audio_Mask !
3056          */
3057         ttype=(gpio&0x0f0000)>>16;
3058         switch(ttype) {
3059         case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3060                 break;
3061         case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3062                 break;
3063         case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3064                 break;
3065         case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3066                 break;
3067                 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3068                 break;
3069         default:
3070                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3071         }
3072
3073         has_remote          =   gpio & 0x800000;
3074         has_radio           =   gpio & 0x400000;
3075         /*   unknown                   0x200000;
3076          *   unknown2                  0x100000; */
3077         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3078         has_tda9820_tda9821 = !(gpio & 0x004000);
3079         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3080         /*
3081          * gpio & 0x001000    output bit for audio routing */
3082
3083         if(is_capture_only)
3084                 tuner=4; /* No tuner present */
3085
3086         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3087                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3088         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3089                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3090                 is_capture_only?"yes":"no ");
3091
3092         if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3093                 btv->tuner_type = tuner;
3094         btv->has_radio = has_radio;
3095
3096         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3097          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3098          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3099         if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3100         /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3101 }
3102
3103 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3104                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3105 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3106                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3107
3108 static void miro_pinnacle_gpio(struct bttv *btv)
3109 {
3110         int id,msp,gpio;
3111         char *info;
3112
3113         gpio_inout(0xffffff, 0);
3114         gpio = gpio_read();
3115         id   = ((gpio>>10) & 63) -1;
3116         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3117         if (id < 32) {
3118                 btv->tuner_type = miro_tunermap[id];
3119                 if (0 == (gpio & 0x20)) {
3120                         btv->has_radio = 1;
3121                         if (!miro_fmtuner[id]) {
3122                                 btv->has_matchbox = 1;
3123                                 btv->mbox_we    = (1<<6);
3124                                 btv->mbox_most  = (1<<7);
3125                                 btv->mbox_clk   = (1<<8);
3126                                 btv->mbox_data  = (1<<9);
3127                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3128                         }
3129                 } else {
3130                         btv->has_radio = 0;
3131                 }
3132                 if (-1 != msp) {
3133                         if (btv->c.type == BTTV_BOARD_MIRO)
3134                                 btv->c.type = BTTV_BOARD_MIROPRO;
3135                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3136                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3137                 }
3138                 printk(KERN_INFO
3139                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3140                        btv->c.nr, id+1, btv->tuner_type,
3141                        !btv->has_radio ? "no" :
3142                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3143                        (-1 == msp) ? "no" : "yes");
3144         } else {
3145                 /* new cards with microtune tuner */
3146                 id = 63 - id;
3147                 btv->has_radio = 0;
3148                 switch (id) {
3149                 case 1:
3150                         info = "PAL / mono";
3151                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3152                         break;
3153                 case 2:
3154                         info = "PAL+SECAM / stereo";
3155                         btv->has_radio = 1;
3156                         btv->tda9887_conf = TDA9887_QSS;
3157                         break;
3158                 case 3:
3159                         info = "NTSC / stereo";
3160                         btv->has_radio = 1;
3161                         btv->tda9887_conf = TDA9887_QSS;
3162                         break;
3163                 case 4:
3164                         info = "PAL+SECAM / mono";
3165                         btv->tda9887_conf = TDA9887_QSS;
3166                         break;
3167                 case 5:
3168                         info = "NTSC / mono";
3169                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3170                         break;
3171                 case 6:
3172                         info = "NTSC / stereo";
3173                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3174                         break;
3175                 case 7:
3176                         info = "PAL / stereo";
3177                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3178                         break;
3179                 default:
3180                         info = "oops: unknown card";
3181                         break;
3182                 }
3183                 if (-1 != msp)
3184                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3185                 printk(KERN_INFO
3186                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3187                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3188                 btv->tuner_type = TUNER_MT2032;
3189         }
3190 }
3191
3192 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3193 #define LM1882_SYNC_DRIVE     0x200000L
3194
3195 static void init_ids_eagle(struct bttv *btv)
3196 {
3197         gpio_inout(0xffffff,0xFFFF37);
3198         gpio_write(0x200020);
3199
3200         /* flash strobe inverter ?! */
3201         gpio_write(0x200024);
3202
3203         /* switch sync drive off */
3204         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3205
3206         /* set BT848 muxel to 2 */
3207         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3208 }
3209
3210 /* Muxsel helper for the IDS Eagle.
3211  * the eagles does not use the standard muxsel-bits but
3212  * has its own multiplexer */
3213 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3214 {
3215         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3216         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3217
3218        /* composite */
3219        /* set chroma ADC to sleep */
3220        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3221        /* set to composite video */
3222        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3223        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3224
3225        /* switch sync drive off */
3226        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3227 }
3228
3229 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3230 {
3231         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3232         gpio_write(masks[input%4]);
3233 }
3234
3235 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3236    alarms output
3237
3238    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3239    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3240
3241    IN - sensor inputs, INx - sensor inputs and TI XORed together
3242    O1,O2,O3 - alarm outputs (relays)
3243
3244    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3245
3246 */
3247
3248 static void init_lmlbt4x(struct bttv *btv)
3249 {
3250         printk(KERN_DEBUG "LMLBT4x init\n");
3251         btwrite(0x000000, BT848_GPIO_REG_INP);
3252         gpio_inout(0xffffff, 0x0006C0);
3253         gpio_write(0x000000);
3254 }
3255
3256 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3257 {
3258         unsigned int inmux = input % 8;
3259         gpio_inout( 0xf, 0xf );
3260         gpio_bits( 0xf, inmux );
3261 }
3262
3263 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3264 {
3265         unsigned int inmux = input % 4;
3266         gpio_inout( 3<<9, 3<<9 );
3267         gpio_bits( 3<<9, inmux<<9 );
3268 }
3269
3270 /* ----------------------------------------------------------------------- */
3271
3272 static void bttv_reset_audio(struct bttv *btv)
3273 {
3274         /*
3275          * BT878A has a audio-reset register.
3276          * 1. This register is an audio reset function but it is in
3277          *    function-0 (video capture) address space.
3278          * 2. It is enough to do this once per power-up of the card.
3279          * 3. There is a typo in the Conexant doc -- it is not at
3280          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3281          * --//Shrikumar 030609
3282          */
3283         if (btv->id != 878)
3284                 return;
3285
3286         if (bttv_debug)
3287                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3288         btwrite((1<<7), 0x058);
3289         udelay(10);
3290         btwrite(     0, 0x058);
3291 }
3292
3293 /* initialization part one -- before registering i2c bus */
3294 void __devinit bttv_init_card1(struct bttv *btv)
3295 {
3296         switch (btv->c.type) {
3297         case BTTV_BOARD_HAUPPAUGE:
3298         case BTTV_BOARD_HAUPPAUGE878:
3299                 boot_msp34xx(btv,5);
3300                 break;
3301         case BTTV_BOARD_VOODOOTV_FM:
3302                 boot_msp34xx(btv,20);
3303                 break;
3304         case BTTV_BOARD_AVERMEDIA98:
3305                 boot_msp34xx(btv,11);
3306                 break;
3307         case BTTV_BOARD_HAUPPAUGEPVR:
3308                 pvr_boot(btv);
3309                 break;
3310         case BTTV_BOARD_TWINHAN_DST:
3311         case BTTV_BOARD_AVDVBT_771:
3312         case BTTV_BOARD_PINNACLESAT:
3313                 btv->use_i2c_hw = 1;
3314                 break;
3315         case BTTV_BOARD_ADLINK_RTV24:
3316                 init_RTV24( btv );
3317                 break;
3318
3319         }
3320         if (!bttv_tvcards[btv->c.type].has_dvb)
3321                 bttv_reset_audio(btv);
3322 }
3323
3324 /* initialization part two -- after registering i2c bus */
3325 void __devinit bttv_init_card2(struct bttv *btv)
3326 {
3327         int tda9887;
3328         int addr=ADDR_UNSET;
3329
3330         btv->tuner_type = -1;
3331
3332         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3333                 bttv_readee(btv,eeprom_data,0xa0);
3334                 identify_by_eeprom(btv,eeprom_data);
3335         }
3336
3337         switch (btv->c.type) {
3338         case BTTV_BOARD_MIRO:
3339         case BTTV_BOARD_MIROPRO:
3340         case BTTV_BOARD_PINNACLE:
3341         case BTTV_BOARD_PINNACLEPRO:
3342                 /* miro/pinnacle */
3343                 miro_pinnacle_gpio(btv);
3344                 break;
3345         case BTTV_BOARD_FLYVIDEO_98:
3346         case BTTV_BOARD_MAXI:
3347         case BTTV_BOARD_LIFE_FLYKIT:
3348         case BTTV_BOARD_FLYVIDEO:
3349         case BTTV_BOARD_TYPHOON_TVIEW:
3350         case BTTV_BOARD_CHRONOS_VS2:
3351         case BTTV_BOARD_FLYVIDEO_98FM:
3352         case BTTV_BOARD_FLYVIDEO2000:
3353         case BTTV_BOARD_FLYVIDEO98EZ:
3354         case BTTV_BOARD_CONFERENCETV:
3355         case BTTV_BOARD_LIFETEC_9415:
3356                 flyvideo_gpio(btv);
3357                 break;
3358         case BTTV_BOARD_HAUPPAUGE:
3359         case BTTV_BOARD_HAUPPAUGE878:
3360         case BTTV_BOARD_HAUPPAUGEPVR:
3361                 /* pick up some config infos from the eeprom */
3362                 bttv_readee(btv,eeprom_data,0xa0);
3363                 hauppauge_eeprom(btv);
3364                 break;
3365         case BTTV_BOARD_AVERMEDIA98:
3366         case BTTV_BOARD_AVPHONE98:
3367                 bttv_readee(btv,eeprom_data,0xa0);
3368                 avermedia_eeprom(btv);
3369                 break;
3370         case BTTV_BOARD_PXC200:
3371                 init_PXC200(btv);
3372                 break;
3373         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3374                 picolo_tetra_init(btv);
3375                 break;
3376         case BTTV_BOARD_VHX:
3377                 btv->has_radio    = 1;
3378                 btv->has_matchbox = 1;
3379                 btv->mbox_we      = 0x20;
3380                 btv->mbox_most    = 0;
3381                 btv->mbox_clk     = 0x08;
3382                 btv->mbox_data    = 0x10;
3383                 btv->mbox_mask    = 0x38;
3384                 break;
3385         case BTTV_BOARD_VOBIS_BOOSTAR:
3386         case BTTV_BOARD_TERRATV:
3387                 terratec_active_radio_upgrade(btv);
3388                 break;
3389         case BTTV_BOARD_MAGICTVIEW061:
3390                 if (btv->cardid == 0x3002144f) {
3391                         btv->has_radio=1;
3392                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3393                 }
3394                 break;
3395        case BTTV_BOARD_STB2:
3396                 if (btv->cardid == 0x3060121a) {
3397                         /* Fix up entry for 3DFX VoodooTV 100,
3398                            which is an OEM STB card variant. */
3399                         btv->has_radio=0;
3400                         btv->tuner_type=TUNER_TEMIC_NTSC;
3401                 }
3402                 break;
3403         case BTTV_BOARD_OSPREY1x0:
3404         case BTTV_BOARD_OSPREY1x0_848:
3405         case BTTV_BOARD_OSPREY101_848:
3406         case BTTV_BOARD_OSPREY1x1:
3407         case BTTV_BOARD_OSPREY1x1_SVID:
3408         case BTTV_BOARD_OSPREY2xx:
3409         case BTTV_BOARD_OSPREY2x0_SVID:
3410         case BTTV_BOARD_OSPREY2x0:
3411         case BTTV_BOARD_OSPREY500:
3412         case BTTV_BOARD_OSPREY540:
3413         case BTTV_BOARD_OSPREY2000:
3414                 bttv_readee(btv,eeprom_data,0xa0);
3415                 osprey_eeprom(btv);
3416                 break;
3417         case BTTV_BOARD_IDS_EAGLE:
3418                 init_ids_eagle(btv);
3419                 break;
3420         case BTTV_BOARD_MODTEC_205:
3421                 bttv_readee(btv,eeprom_data,0xa0);
3422                 modtec_eeprom(btv);
3423                 break;
3424         case BTTV_BOARD_LMLBT4:
3425                 init_lmlbt4x(btv);
3426                 break;
3427         case BTTV_BOARD_TIBET_CS16:
3428                 tibetCS16_init(btv);
3429                 break;
3430         case BTTV_BOARD_KODICOM_4400R:
3431                 kodicom4400r_init(btv);
3432                 break;
3433         }
3434
3435         /* pll configuration */
3436         if (!(btv->id==848 && btv->revision==0x11)) {
3437                 /* defaults from card list */
3438                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3439                         btv->pll.pll_ifreq=28636363;
3440                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3441                 }
3442                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3443                         btv->pll.pll_ifreq=35468950;
3444                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3445                 }
3446                 /* insmod options can override */
3447                 switch (pll[btv->c.nr]) {
3448                 case 0: /* none */
3449                         btv->pll.pll_crystal = 0;
3450                         btv->pll.pll_ifreq   = 0;
3451                         btv->pll.pll_ofreq   = 0;
3452                         break;
3453                 case 1: /* 28 MHz */
3454                 case 28:
3455                         btv->pll.pll_ifreq   = 28636363;
3456                         btv->pll.pll_ofreq   = 0;
3457                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3458                         break;
3459                 case 2: /* 35 MHz */
3460                 case 35:
3461                         btv->pll.pll_ifreq   = 35468950;
3462                         btv->pll.pll_ofreq   = 0;
3463                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3464                         break;
3465                 }
3466         }
3467         btv->pll.pll_current = -1;
3468
3469         /* tuner configuration (from card list / autodetect / insmod option) */
3470         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3471                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3472
3473         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3474                 if(UNSET == btv->tuner_type)
3475                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3476         if (UNSET != tuner[btv->c.nr])
3477                 btv->tuner_type = tuner[btv->c.nr];
3478         printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3479
3480         if (btv->tuner_type != UNSET) {
3481                 struct tuner_setup tun_setup;
3482
3483                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3484                 tun_setup.type = btv->tuner_type;
3485                 tun_setup.addr = addr;
3486
3487                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3488         }
3489
3490         if (btv->tda9887_conf) {
3491                 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3492                                                         &btv->tda9887_conf);
3493         }
3494
3495         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3496         if (svhs[btv->c.nr] != UNSET)
3497                 btv->svhs = svhs[btv->c.nr];
3498         if (remote[btv->c.nr] != UNSET)
3499                 btv->has_remote = remote[btv->c.nr];
3500
3501         if (bttv_tvcards[btv->c.type].has_radio)
3502                 btv->has_radio=1;
3503         if (bttv_tvcards[btv->c.type].has_remote)
3504                 btv->has_remote=1;
3505         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3506                 btv->gpioirq=1;
3507         if (bttv_tvcards[btv->c.type].audio_hook)
3508                 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3509
3510         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3511                 /* detect Bt832 chip for quartzsight digital camera */
3512                 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3513                     (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3514                         boot_bt832(btv);
3515         }
3516
3517         if (!autoload)
3518                 return;
3519
3520         /* try to detect audio/fader chips */
3521         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3522             bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3523                 request_module("msp3400");
3524
3525         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3526             bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3527                 request_module("msp3400");
3528
3529         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3530             bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3531                 request_module("tda9875");
3532
3533         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3534             bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3535                 request_module("tda7432");
3536
3537         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3538                 request_module("tvaudio");
3539
3540         /* tuner modules */
3541         tda9887 = 0;
3542         if (btv->tda9887_conf)
3543                 tda9887 = 1;
3544         if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3545             bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3546                 tda9887 = 1;
3547         /* Hybrid DVB card, DOES have a tda9887 */
3548         if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3549                 tda9887 = 1;
3550         if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
3551            (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
3552            (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
3553             tda9887)
3554                 request_module("tda9887");
3555         if (btv->tuner_type != UNSET)
3556                 request_module("tuner");
3557 }
3558
3559
3560 /* ----------------------------------------------------------------------- */
3561
3562 static void modtec_eeprom(struct bttv *btv)
3563 {
3564         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3565                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3566                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3567                        btv->c.nr,&eeprom_data[0x1e]);
3568         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3569                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3570                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3571                        btv->c.nr,&eeprom_data[0x1e]);
3572         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3573                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3574                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3575                        btv->c.nr,&eeprom_data[0x1e]);
3576         } else {
3577                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3578                        btv->c.nr,&eeprom_data[0x1e]);
3579         }
3580 }
3581
3582 static void __devinit hauppauge_eeprom(struct bttv *btv)
3583 {
3584         struct tveeprom tv;
3585
3586         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3587         btv->tuner_type = tv.tuner_type;
3588         btv->has_radio  = tv.has_radio;
3589
3590         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3591                 btv->c.nr, tv.model);
3592
3593         /*
3594          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3595          * type based on model #.
3596          */
3597         if(tv.model == 64900) {
3598                 printk("bttv%d: Switching board type from %s to %s\n",
3599                         btv->c.nr,
3600                         bttv_tvcards[btv->c.type].name,
3601                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3602                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3603         }
3604 }
3605
3606 static int terratec_active_radio_upgrade(struct bttv *btv)
3607 {
3608         int freq;
3609
3610         btv->has_radio    = 1;
3611         btv->has_matchbox = 1;
3612         btv->mbox_we      = 0x10;
3613         btv->mbox_most    = 0x20;
3614         btv->mbox_clk     = 0x08;
3615         btv->mbox_data    = 0x04;
3616         btv->mbox_mask    = 0x3c;
3617
3618         btv->mbox_iow     = 1 <<  8;
3619         btv->mbox_ior     = 1 <<  9;
3620         btv->mbox_csel    = 1 << 10;
3621
3622         freq=88000/62.5;
3623         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3624         if (0x1ed8 == tea5757_read(btv)) {
3625                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3626                        btv->c.nr);
3627                 btv->has_radio    = 1;
3628                 btv->has_matchbox = 1;
3629         } else {
3630                 btv->has_radio    = 0;
3631                 btv->has_matchbox = 0;
3632         }
3633         return 0;
3634 }
3635
3636
3637 /* ----------------------------------------------------------------------- */
3638
3639 /*
3640  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3641  *
3642  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3643  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3644  * unpacked with unzip).
3645  */
3646 #define PVR_GPIO_DELAY          10
3647
3648 #define BTTV_ALT_DATA           0x000001
3649 #define BTTV_ALT_DCLK           0x100000
3650 #define BTTV_ALT_NCONFIG        0x800000
3651
3652 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3653 {
3654         u32 n;
3655         u8 bits;
3656         int i;
3657
3658         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3659         gpio_write(0);
3660         udelay(PVR_GPIO_DELAY);
3661
3662         gpio_write(BTTV_ALT_NCONFIG);
3663         udelay(PVR_GPIO_DELAY);
3664
3665         for (n = 0; n < microlen; n++) {
3666                 bits = micro[n];
3667                 for ( i = 0 ; i < 8 ; i++ ) {
3668                         gpio_bits(BTTV_ALT_DCLK,0);
3669                         if (bits & 0x01)
3670                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3671                         else
3672                                 gpio_bits(BTTV_ALT_DATA,0);
3673                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3674                         bits >>= 1;
3675                 }
3676         }
3677         gpio_bits(BTTV_ALT_DCLK,0);
3678         udelay(PVR_GPIO_DELAY);
3679
3680         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3681         for (i = 0 ; i < 30 ; i++) {
3682                 gpio_bits(BTTV_ALT_DCLK,0);
3683                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3684         }
3685         gpio_bits(BTTV_ALT_DCLK,0);
3686         return 0;
3687 }
3688
3689 static int __devinit pvr_boot(struct bttv *btv)
3690 {
3691         const struct firmware *fw_entry;
3692         int rc;
3693
3694         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3695         if (rc != 0) {
3696                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3697                        btv->c.nr);
3698                 return rc;
3699         }
3700         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3701         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3702                btv->c.nr, (rc < 0) ? "failed" : "ok");
3703         release_firmware(fw_entry);
3704         return rc;
3705 }
3706
3707 /* ----------------------------------------------------------------------- */
3708 /* some osprey specific stuff                                              */
3709
3710 static void __devinit osprey_eeprom(struct bttv *btv)
3711 {
3712        int i = 0;
3713        unsigned char *ee = eeprom_data;
3714        unsigned long serial = 0;
3715
3716        if (btv->c.type == 0) {
3717                /* this might be an antique... check for MMAC label in eeprom */
3718                if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3719                        unsigned char checksum = 0;
3720                        for (i =0; i<21; i++)
3721                                checksum += ee[i];
3722                        if (checksum != ee[21])
3723                                return;
3724                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3725                        for (i = 12; i < 21; i++)
3726                                serial *= 10, serial += ee[i] - '0';
3727                }
3728        } else {
3729                unsigned short type;
3730                int offset = 4*16;
3731
3732                for(; offset < 8*16; offset += 16) {
3733                        unsigned short checksum = 0;
3734                        /* verify the checksum */
3735                        for(i = 0; i<14; i++) checksum += ee[i+offset];
3736                                checksum = ~checksum;  /* no idea why */
3737                                if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3738                                    ((checksum & 0x0FF) == ee[offset+15])) {
3739                                break;
3740                        }
3741                }
3742
3743                if (offset >= 8*16)
3744                        return;
3745
3746                /* found a valid descriptor */
3747                type = (ee[offset+4]<<8) | (ee[offset+5]);
3748
3749                switch(type) {
3750
3751                /* 848 based */
3752                case 0x0004:
3753                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3754                        break;
3755                case 0x0005:
3756                        btv->c.type = BTTV_BOARD_OSPREY101_848;
3757                        break;
3758
3759                /* 878 based */
3760                case 0x0012:
3761                case 0x0013:
3762                        btv->c.type = BTTV_BOARD_OSPREY1x0;
3763                        break;
3764                case 0x0014:
3765                case 0x0015:
3766                        btv->c.type = BTTV_BOARD_OSPREY1x1;
3767                        break;
3768                case 0x0016:
3769                case 0x0017:
3770                case 0x0020:
3771                        btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3772                        break;
3773                case 0x0018:
3774                case 0x0019:
3775                case 0x001E:
3776                case 0x001F:
3777                        btv->c.type = BTTV_BOARD_OSPREY2xx;
3778                        break;
3779                case 0x001A:
3780                case 0x001B:
3781                        btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3782                        break;
3783                case 0x0040:
3784                        btv->c.type = BTTV_BOARD_OSPREY500;
3785                        break;
3786                case 0x0050:
3787                case 0x0056:
3788                        btv->c.type = BTTV_BOARD_OSPREY540;
3789                        /* bttv_osprey_540_init(btv); */
3790                        break;
3791                case 0x0060:
3792                case 0x0070:
3793                        btv->c.type = BTTV_BOARD_OSPREY2x0;
3794                        /* enable output on select control lines */
3795                        gpio_inout(0xffffff,0x000303);
3796                        break;
3797                default:
3798                        /* unknown...leave generic, but get serial # */
3799                        break;
3800                }
3801                serial =  (ee[offset+6] << 24)
3802                        | (ee[offset+7] << 16)
3803                        | (ee[offset+8] <<  8)
3804                        | (ee[offset+9]);
3805        }
3806
3807        printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3808               btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3809 }
3810
3811 /* ----------------------------------------------------------------------- */
3812 /* AVermedia specific stuff, from  bktr_card.c                             */
3813
3814 static int tuner_0_table[] = {
3815         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3816         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3817         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3818         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3819         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3820         TUNER_PHILIPS_FM1216ME_MK3 };
3821
3822 static int tuner_1_table[] = {
3823         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3824         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3825         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3826         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3827         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3828
3829 static void __devinit avermedia_eeprom(struct bttv *btv)
3830 {
3831         int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3832
3833         tuner_make      = (eeprom_data[0x41] & 0x7);
3834         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3835         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3836         btv->has_remote = (eeprom_data[0x42] & 0x01);
3837
3838         if (tuner_make == 0 || tuner_make == 2)
3839                 if(tuner_format <=0x0a)
3840                         tuner = tuner_0_table[tuner_format];
3841         if (tuner_make == 1)
3842                 if(tuner_format <=9)
3843                         tuner = tuner_1_table[tuner_format];
3844
3845         if (tuner_make == 4)
3846                 if(tuner_format == 0x09)
3847                         tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3848
3849         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3850                 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3851         if(tuner) {
3852                 btv->tuner_type=tuner;
3853                 printk("%d",tuner);
3854         } else
3855                 printk("Unknown type");
3856         printk(" radio:%s remote control:%s\n",
3857                tuner_tv_fm     ? "yes" : "no",
3858                btv->has_remote ? "yes" : "no");
3859 }
3860
3861 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3862 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3863 {
3864         /* fix up our card entry */
3865         if(norm==VIDEO_MODE_NTSC) {
3866                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3867                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3868                 dprintk("bttv_tda9880_setnorm to NTSC\n");
3869         }
3870         else {
3871                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3872                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3873                 dprintk("bttv_tda9880_setnorm to PAL\n");
3874         }
3875         /* set GPIO according */
3876         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3877                   bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3878 }
3879
3880
3881 /*
3882  * reset/enable the MSP on some Hauppauge cards
3883  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3884  *
3885  * Hauppauge:  pin  5
3886  * Voodoo:     pin 20
3887  */
3888 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3889 {
3890         int mask = (1 << pin);
3891
3892         gpio_inout(mask,mask);
3893         gpio_bits(mask,0);
3894         udelay(2500);
3895         gpio_bits(mask,mask);
3896
3897         if (bttv_gpio)
3898                 bttv_gpio_tracking(btv,"msp34xx");
3899         if (bttv_verbose)
3900                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3901                        "init [%d]\n", btv->c.nr, pin);
3902 }
3903
3904 static void __devinit boot_bt832(struct bttv *btv)
3905 {
3906 }
3907
3908 /* ----------------------------------------------------------------------- */
3909 /*  Imagenation L-Model PXC200 Framegrabber */
3910 /*  This is basically the same procedure as
3911  *  used by Alessandro Rubini in his pxc200
3912  *  driver, but using BTTV functions */
3913
3914 static void __devinit init_PXC200(struct bttv *btv)
3915 {
3916         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3917                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3918                                             0x00 };
3919         unsigned int i;
3920         int tmp;
3921         u32 val;
3922
3923         /* Initialise GPIO-connevted stuff */
3924         gpio_inout(0xffffff, (1<<13));
3925         gpio_write(0);
3926         udelay(3);
3927         gpio_write(1<<13);
3928         /* GPIO inputs are pulled up, so no need to drive
3929          * reset pin any longer */
3930         gpio_bits(0xffffff, 0);
3931         if (bttv_gpio)
3932                 bttv_gpio_tracking(btv,"pxc200");
3933
3934         /*  we could/should try and reset/control the AD pots? but
3935             right now  we simply  turned off the crushing.  Without
3936             this the AGC drifts drifts
3937             remember the EN is reverse logic -->
3938             setting BT848_ADC_AGC_EN disable the AGC
3939             tboult@eecs.lehigh.edu
3940         */
3941
3942         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3943
3944         /*      Initialise MAX517 DAC */
3945         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3946         bttv_I2CWrite(btv,0x5E,0,0x80,1);
3947
3948         /*      Initialise 12C508 PIC */
3949         /*      The I2CWrite and I2CRead commmands are actually to the
3950          *      same chips - but the R/W bit is included in the address
3951          *      argument so the numbers are different */
3952
3953
3954         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3955
3956         /* First of all, enable the clock line. This is used in the PXC200-F */
3957         val = btread(BT848_GPIO_DMA_CTL);
3958         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3959         btwrite(val, BT848_GPIO_DMA_CTL);
3960
3961         /* Then, push to 0 the reset pin long enough to reset the *
3962          * device same as above for the reset line, but not the same
3963          * value sent to the GPIO-connected stuff
3964          * which one is the good one? */
3965         gpio_inout(0xffffff,(1<<2));
3966         gpio_write(0);
3967         udelay(10);
3968         gpio_write(1<<2);
3969
3970         for (i = 0; i < ARRAY_SIZE(vals); i++) {
3971                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3972                 if (tmp != -1) {
3973                         printk(KERN_INFO
3974                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3975                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3976                 }
3977         }
3978
3979         printk(KERN_INFO "PXC200 Initialised.\n");
3980 }
3981
3982
3983
3984 /* ----------------------------------------------------------------------- */
3985 /*
3986  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3987  *  it. This apparently involves the following procedure for each 878 chip:
3988  *
3989  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
3990  *
3991  *  2)  write to GPIO_DATA
3992  *      - 0x0E
3993  *      - sleep 1ms
3994  *      - 0x10 + 0x0E
3995  *      - sleep 10ms
3996  *      - 0x0E
3997  *     read from GPIO_DATA into buf (uint_32)
3998  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3999  *                 error. ERROR_CPLD_Check_Failed stop.
4000  *
4001  *  3) write to GPIO_DATA
4002  *      - write 0x4400 + 0x0E
4003  *      - sleep 10ms
4004  *      - write 0x4410 + 0x0E
4005  *      - sleep 1ms
4006  *      - write 0x0E
4007  *     read from GPIO_DATA into buf (uint_32)
4008  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
4009  *                error. ERROR_CPLD_Check_Failed.
4010  */
4011 /* ----------------------------------------------------------------------- */
4012 static void
4013 init_RTV24 (struct bttv *btv)
4014 {
4015         uint32_t dataRead = 0;
4016         long watchdog_value = 0x0E;
4017
4018         printk (KERN_INFO
4019                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4020                 btv->c.nr);
4021
4022         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4023
4024         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4025         msleep (1);
4026         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4027         msleep (10);
4028         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4029
4030         dataRead = btread (BT848_GPIO_DATA);
4031
4032         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4033                 printk (KERN_INFO
4034                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4035                         btv->c.nr, dataRead);
4036         }
4037
4038         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4039         msleep (10);
4040         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4041         msleep (1);
4042         btwrite (watchdog_value, BT848_GPIO_DATA);
4043         msleep (1);
4044         dataRead = btread (BT848_GPIO_DATA);
4045
4046         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4047                 printk (KERN_INFO
4048                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4049                         btv->c.nr, dataRead);
4050
4051                 return;
4052         }
4053
4054         printk (KERN_INFO
4055                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4056 }
4057
4058
4059
4060 /* ----------------------------------------------------------------------- */
4061 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4062 /*
4063  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4064  * This code is placed under the terms of the GNU General Public License
4065  *
4066  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4067  */
4068
4069 static void bus_low(struct bttv *btv, int bit)
4070 {
4071         if (btv->mbox_ior) {
4072                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4073                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4074                 udelay(5);
4075         }
4076
4077         gpio_bits(bit,0);
4078         udelay(5);
4079
4080         if (btv->mbox_ior) {
4081                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4082                 udelay(5);
4083         }
4084 }
4085
4086 static void bus_high(struct bttv *btv, int bit)
4087 {
4088         if (btv->mbox_ior) {
4089                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4090                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4091                 udelay(5);
4092         }
4093
4094         gpio_bits(bit,bit);
4095         udelay(5);
4096
4097         if (btv->mbox_ior) {
4098                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4099                 udelay(5);
4100         }
4101 }
4102
4103 static int bus_in(struct bttv *btv, int bit)
4104 {
4105         if (btv->mbox_ior) {
4106                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4107                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4108                 udelay(5);
4109
4110                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4111                 udelay(5);
4112         }
4113         return gpio_read() & (bit);
4114 }
4115
4116 /* TEA5757 register bits */
4117 #define TEA_FREQ                0:14
4118 #define TEA_BUFFER              15:15
4119
4120 #define TEA_SIGNAL_STRENGTH     16:17
4121
4122 #define TEA_PORT1               18:18
4123 #define TEA_PORT0               19:19
4124
4125 #define TEA_BAND                20:21
4126 #define TEA_BAND_FM             0
4127 #define TEA_BAND_MW             1
4128 #define TEA_BAND_LW             2
4129 #define TEA_BAND_SW             3
4130
4131 #define TEA_MONO                22:22
4132 #define TEA_ALLOW_STEREO        0
4133 #define TEA_FORCE_MONO          1
4134
4135 #define TEA_SEARCH_DIRECTION    23:23
4136 #define TEA_SEARCH_DOWN         0
4137 #define TEA_SEARCH_UP           1
4138
4139 #define TEA_STATUS              24:24
4140 #define TEA_STATUS_TUNED        0
4141 #define TEA_STATUS_SEARCHING    1
4142
4143 /* Low-level stuff */
4144 static int tea5757_read(struct bttv *btv)
4145 {
4146         unsigned long timeout;
4147         int value = 0;
4148         int i;
4149
4150         /* better safe than sorry */
4151         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4152
4153         if (btv->mbox_ior) {
4154                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4155                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4156                 udelay(5);
4157         }
4158
4159         if (bttv_gpio)
4160                 bttv_gpio_tracking(btv,"tea5757 read");
4161
4162         bus_low(btv,btv->mbox_we);
4163         bus_low(btv,btv->mbox_clk);
4164
4165         udelay(10);
4166         timeout= jiffies + HZ;
4167
4168         /* wait for DATA line to go low; error if it doesn't */
4169         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4170                 schedule();
4171         if (bus_in(btv,btv->mbox_data)) {
4172                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4173                 return -1;
4174         }
4175
4176         dprintk("bttv%d: tea5757:",btv->c.nr);
4177         for(i = 0; i < 24; i++)
4178         {
4179                 udelay(5);
4180                 bus_high(btv,btv->mbox_clk);
4181                 udelay(5);
4182                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4183                 bus_low(btv,btv->mbox_clk);
4184                 value <<= 1;
4185                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4186                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4187         }
4188         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4189         return value;
4190 }
4191
4192 static int tea5757_write(struct bttv *btv, int value)
4193 {
4194         int i;
4195         int reg = value;
4196
4197         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4198
4199         if (btv->mbox_ior) {
4200                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4201                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4202                 udelay(5);
4203         }
4204         if (bttv_gpio)
4205                 bttv_gpio_tracking(btv,"tea5757 write");
4206
4207         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4208         bus_low(btv,btv->mbox_clk);
4209         bus_high(btv,btv->mbox_we);
4210         for(i = 0; i < 25; i++)
4211         {
4212                 if (reg & 0x1000000)
4213                         bus_high(btv,btv->mbox_data);
4214                 else
4215                         bus_low(btv,btv->mbox_data);
4216                 reg <<= 1;
4217                 bus_high(btv,btv->mbox_clk);
4218                 udelay(10);
4219                 bus_low(btv,btv->mbox_clk);
4220                 udelay(10);
4221         }
4222         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4223         return 0;
4224 }
4225
4226 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4227 {
4228         dprintk("tea5757_set_freq %d\n",freq);
4229         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4230 }
4231
4232
4233 /* ----------------------------------------------------------------------- */
4234 /* winview                                                                 */
4235
4236 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4237 {
4238         /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4239         int bits_out, loops, vol, data;
4240
4241         if (!set) {
4242                 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4243                 v->flags |= VIDEO_AUDIO_VOLUME;
4244                 return;
4245         }
4246
4247         /* 32 levels logarithmic */
4248         vol = 32 - ((v->volume>>11));
4249         /* units */
4250         bits_out = (PT2254_DBS_IN_2>>(vol%5));
4251         /* tens */
4252         bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4253         bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4254         data = gpio_read();
4255         data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4256                   WINVIEW_PT2254_STROBE);
4257         for (loops = 17; loops >= 0 ; loops--) {
4258                 if (bits_out & (1<<loops))
4259                         data |=  WINVIEW_PT2254_DATA;
4260                 else
4261                         data &= ~WINVIEW_PT2254_DATA;
4262                 gpio_write(data);
4263                 udelay(5);
4264                 data |= WINVIEW_PT2254_CLK;
4265                 gpio_write(data);
4266                 udelay(5);
4267                 data &= ~WINVIEW_PT2254_CLK;
4268                 gpio_write(data);
4269         }
4270         data |=  WINVIEW_PT2254_STROBE;
4271         data &= ~WINVIEW_PT2254_DATA;
4272         gpio_write(data);
4273         udelay(10);
4274         data &= ~WINVIEW_PT2254_STROBE;
4275         gpio_write(data);
4276 }
4277
4278 /* ----------------------------------------------------------------------- */
4279 /* mono/stereo control for various cards (which don't use i2c chips but    */
4280 /* connect something to the GPIO pins                                      */
4281
4282 static void
4283 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4284 {
4285         unsigned int con = 0;
4286
4287         if (set) {
4288                 gpio_inout(0x300, 0x300);
4289                 if (v->mode & VIDEO_SOUND_LANG1)
4290                         con = 0x000;
4291                 if (v->mode & VIDEO_SOUND_LANG2)
4292                         con = 0x300;
4293                 if (v->mode & VIDEO_SOUND_STEREO)
4294                         con = 0x200;
4295 /*              if (v->mode & VIDEO_SOUND_MONO)
4296  *                      con = 0x100; */
4297                 gpio_bits(0x300, con);
4298         } else {
4299                 v->mode = VIDEO_SOUND_STEREO |
4300                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4301         }
4302 }
4303
4304 static void
4305 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4306 {
4307         unsigned int val, con;
4308
4309         if (btv->radio_user)
4310                 return;
4311
4312         val = gpio_read();
4313         if (set) {
4314                 con = 0x000;
4315                 if (v->mode & VIDEO_SOUND_LANG2) {
4316                         if (v->mode & VIDEO_SOUND_LANG1) {
4317                                 /* LANG1 + LANG2 */
4318                                 con = 0x100;
4319                         }
4320                         else {
4321                                 /* LANG2 */
4322                                 con = 0x300;
4323                         }
4324                 }
4325                 if (con != (val & 0x300)) {
4326                         gpio_bits(0x300, con);
4327                         if (bttv_gpio)
4328                                 bttv_gpio_tracking(btv,"gvbctv5pci");
4329                 }
4330         } else {
4331                 switch (val & 0x70) {
4332                   case 0x10:
4333                         v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4334                         break;
4335                   case 0x30:
4336                         v->mode = VIDEO_SOUND_LANG2;
4337                         break;
4338                   case 0x50:
4339                         v->mode = VIDEO_SOUND_LANG1;
4340                         break;
4341                   case 0x60:
4342                         v->mode = VIDEO_SOUND_STEREO;
4343                         break;
4344                   case 0x70:
4345                         v->mode = VIDEO_SOUND_MONO;
4346                         break;
4347                   default:
4348                         v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4349                                   VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4350                 }
4351         }
4352 }
4353
4354 /*
4355  * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4356  *  I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4357  *  0xdde enables mono and 0xccd enables sap
4358  *
4359  * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4360  *  P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4361  *  input/output sound connection, so both must be set for output mode.
4362  *
4363  * Looks like it's needed only for the "tvphone", the "tvphone 98"
4364  * handles this with a tda9840
4365  *
4366  */
4367 static void
4368 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4369 {
4370         int val = 0;
4371
4372         if (set) {
4373                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4374                         val = 0x02;
4375                 if (v->mode & VIDEO_SOUND_STEREO)
4376                         val = 0x01;
4377                 if (val) {
4378                         gpio_bits(0x03,val);
4379                         if (bttv_gpio)
4380                                 bttv_gpio_tracking(btv,"avermedia");
4381                 }
4382         } else {
4383                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4384                         VIDEO_SOUND_LANG1;
4385                 return;
4386         }
4387 }
4388
4389 static void
4390 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4391 {
4392         int val = 0;
4393
4394         if (set) {
4395                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4396                         val = 0x01;
4397                 if (v->mode & VIDEO_SOUND_STEREO)  /* STEREO */
4398                         val = 0x02;
4399                 btaor(val, ~0x03, BT848_GPIO_DATA);
4400                 if (bttv_gpio)
4401                         bttv_gpio_tracking(btv,"avermedia");
4402         } else {
4403                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4404                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4405                 return;
4406         }
4407 }
4408
4409 /* Lifetec 9415 handling */
4410 static void
4411 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4412 {
4413         int val = 0;
4414
4415         if (gpio_read() & 0x4000) {
4416                 v->mode = VIDEO_SOUND_MONO;
4417                 return;
4418         }
4419
4420         if (set) {
4421                 if (v->mode & VIDEO_SOUND_LANG2)  /* A2 SAP */
4422                         val = 0x0080;
4423                 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4424                         val = 0x0880;
4425                 if ((v->mode & VIDEO_SOUND_LANG1) ||
4426                     (v->mode & VIDEO_SOUND_MONO))
4427                         val = 0;
4428                 gpio_bits(0x0880, val);
4429                 if (bttv_gpio)
4430                         bttv_gpio_tracking(btv,"lt9415");
4431         } else {
4432                 /* autodetect doesn't work with this card :-( */
4433                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4434                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4435                 return;
4436         }
4437 }
4438
4439 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4440 static void
4441 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4442 {
4443         unsigned int con = 0;
4444
4445         if (set) {
4446                 gpio_inout(0x180000,0x180000);
4447                 if (v->mode & VIDEO_SOUND_LANG2)
4448                         con = 0x080000;
4449                 if (v->mode & VIDEO_SOUND_STEREO)
4450                         con = 0x180000;
4451                 gpio_bits(0x180000, con);
4452                 if (bttv_gpio)
4453                         bttv_gpio_tracking(btv,"terratv");
4454         } else {
4455                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4456                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4457         }
4458 }
4459
4460 static void
4461 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4462 {
4463         unsigned long val = 0;
4464
4465         if (set) {
4466                 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4467                 if (v->mode & VIDEO_SOUND_MONO)         /* Mono */
4468                         val = 0x420000;
4469                 if (v->mode & VIDEO_SOUND_LANG1)        /* Mono */
4470                         val = 0x420000;
4471                 if (v->mode & VIDEO_SOUND_LANG2)        /* SAP */
4472                         val = 0x410000;
4473                 if (v->mode & VIDEO_SOUND_STEREO)       /* Stereo */
4474                         val = 0x020000;
4475                 if (val) {
4476                         gpio_bits(0x430000, val);
4477                         if (bttv_gpio)
4478                                 bttv_gpio_tracking(btv,"winfast2000");
4479                 }
4480         } else {
4481                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4482                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4483         }
4484 }
4485
4486 /*
4487  * Dariusz Kowalewski <darekk@automex.pl>
4488  * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4489  * revision 9B has on-board TDA9874A sound decoder).
4490  *
4491  * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4492  *       will mute this cards.
4493  */
4494 static void
4495 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4496 {
4497         unsigned int val = 0;
4498
4499         if (btv->radio_user)
4500                 return;
4501
4502         if (set) {
4503                 if (v->mode & VIDEO_SOUND_MONO) {
4504                         val = 0x01;
4505                 }
4506                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4507                     || (v->mode & VIDEO_SOUND_STEREO)) {
4508                         val = 0x02;
4509                 }
4510                 if (val) {
4511                         gpio_bits(0x03,val);
4512                         if (bttv_gpio)
4513                                 bttv_gpio_tracking(btv,"pvbt878p9b");
4514                 }
4515         } else {
4516                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4517                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4518         }
4519 }
4520
4521 /*
4522  * Dariusz Kowalewski <darekk@automex.pl>
4523  * sound control for FlyVideo 2000S (with tda9874 decoder)
4524  * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4525  */
4526 static void
4527 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4528 {
4529         unsigned int val = 0xffff;
4530
4531         if (btv->radio_user)
4532                 return;
4533         if (set) {
4534                 if (v->mode & VIDEO_SOUND_MONO) {
4535                         val = 0x0000;
4536                 }
4537                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4538                     || (v->mode & VIDEO_SOUND_STEREO)) {
4539                         val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4540                 }
4541                 if (val != 0xffff) {
4542                         gpio_bits(0x1800, val);
4543                         if (bttv_gpio)
4544                                 bttv_gpio_tracking(btv,"fv2000s");
4545                 }
4546         } else {
4547                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4548                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4549         }
4550 }
4551
4552 /*
4553  * sound control for Canopus WinDVR PCI
4554  * Masaki Suzuki <masaki@btree.org>
4555  */
4556 static void
4557 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4558 {
4559         unsigned long val = 0;
4560
4561         if (set) {
4562                 if (v->mode & VIDEO_SOUND_MONO)
4563                         val = 0x040000;
4564                 if (v->mode & VIDEO_SOUND_LANG1)
4565                         val = 0;
4566                 if (v->mode & VIDEO_SOUND_LANG2)
4567                         val = 0x100000;
4568                 if (v->mode & VIDEO_SOUND_STEREO)
4569                         val = 0;
4570                 if (val) {
4571                         gpio_bits(0x140000, val);
4572                         if (bttv_gpio)
4573                                 bttv_gpio_tracking(btv,"windvr");
4574                 }
4575         } else {
4576                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4577                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4578         }
4579 }
4580
4581 /*
4582  * sound control for AD-TVK503
4583  * Hiroshi Takekawa <sian@big.or.jp>
4584  */
4585 static void
4586 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4587 {
4588         unsigned int con = 0xffffff;
4589
4590         /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4591
4592         if (set) {
4593                 /* btor(***, BT848_GPIO_OUT_EN); */
4594                 if (v->mode & VIDEO_SOUND_LANG1)
4595                         con = 0x00000000;
4596                 if (v->mode & VIDEO_SOUND_LANG2)
4597                         con = 0x00180000;
4598                 if (v->mode & VIDEO_SOUND_STEREO)
4599                         con = 0x00000000;
4600                 if (v->mode & VIDEO_SOUND_MONO)
4601                         con = 0x00060000;
4602                 if (con != 0xffffff) {
4603                         gpio_bits(0x1e0000,con);
4604                         if (bttv_gpio)
4605                                 bttv_gpio_tracking(btv, "adtvk503");
4606                 }
4607         } else {
4608                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4609                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4610         }
4611 }
4612
4613 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4614  *
4615  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4616  * switch instead (CD22M3494E). This IC can have multiple active connections
4617  * between Xn (input) and Yn (output) pins. We need to clear any existing
4618  * connection prior to establish a new one, pulsing the STROBE pin.
4619  *
4620  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4621  * GPIO pins are wired as:
4622  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4623  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4624  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroler)
4625  *  GPIO[8]   -                  - P3[5] (microcontroler)
4626  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroler)
4627  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroler)
4628  *  GPINTR    -                  - P3[4] (microcontroler)
4629  *
4630  * The microcontroler is a 80C32 like. It should be possible to change xpoint
4631  * configuration either directly (as we are doing) or using the microcontroler
4632  * which is also wired to I2C interface. I have no further info on the
4633  * microcontroler features, one would need to disassembly the firmware.
4634  * note: the vendor refused to give any information on this product, all
4635  *       that stuff was found using a multimeter! :)
4636  */
4637 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4638 {
4639         /* reset all conections */
4640         gpio_bits(0x200,0x200);
4641         mdelay(1);
4642         gpio_bits(0x200,0x000);
4643         mdelay(1);
4644
4645         /* create a new conection */
4646         gpio_bits(0x480,0x080);
4647         gpio_bits(0x480,0x480);
4648         mdelay(1);
4649         gpio_bits(0x480,0x080);
4650         mdelay(1);
4651 }
4652
4653 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4654  *
4655  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4656  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4657  * chips, ten eight input analog multiplexors, a not chip and a few
4658  * other components.
4659  *
4660  * 16 inputs on a secondary bracket are provided and can be selected
4661  * from each of the four capture chips.  Two of the eight input
4662  * multiplexors are used to select from any of the 16 input signals.
4663  *
4664  * Unsupported hardware capabilities:
4665  *  . A video output monitor on the secondary bracket can be selected from
4666  *    one of the 878A chips.
4667  *  . Another passthrough but I haven't spent any time investigating it.
4668  *  . Digital I/O (logic level connected to GPIO) is available from an
4669  *    onboard header.
4670  *
4671  * The on chip input mux should always be set to 2.
4672  * GPIO[16:19] - Video input selection
4673  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4674  * GPIO[?:?]   - Digital I/O.
4675  *
4676  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4677  * determined what function (if any) it provides.  With the microcontroller
4678  * and sync seperator chips a guess is that it might have to do with video
4679  * switching and maybe some digital I/O.
4680  */
4681 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4682 {
4683         /* video mux */
4684         gpio_bits(0x0f0000, input << 16);
4685 }
4686
4687 static void tibetCS16_init(struct bttv *btv)
4688 {
4689         /* enable gpio bits, mask obtained via btSpy */
4690         gpio_inout(0xffffff, 0x0f7fff);
4691         gpio_write(0x0f7fff);
4692 }
4693
4694 /*
4695  * The following routines for the Kodicom-4400r get a little mind-twisting.
4696  * There is a "master" controller and three "slave" controllers, together
4697  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4698  * The analog switch is controlled by the "master", but the detection order
4699  * of the four BT878A chips is in an order which I just don't understand.
4700  * The "master" is actually the second controller to be detected.  The
4701  * logic on the board uses logical numbers for the 4 controlers, but
4702  * those numbers are different from the detection sequence.  When working
4703  * with the analog switch, we need to "map" from the detection sequence
4704  * over to the board's logical controller number.  This mapping sequence
4705  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4706  * unit 3, the second (which is the master) is logical unit 0, etc.
4707  * We need to maintain the status of the analog switch (which of the 16
4708  * cameras is connected to which of the 4 controllers).  Rather than
4709  * add to the bttv structure for this, we use the data reserved for
4710  * the mbox (unused for this card type).
4711  */
4712
4713 /*
4714  * First a routine to set the analog switch, which controls which camera
4715  * is routed to which controller.  The switch comprises an X-address
4716  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4717  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4718  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4719  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4720  * specified address.  The idea is to set the address and data, then bring
4721  * STROBE high, and finally bring STROBE back to low.
4722  */
4723 static void kodicom4400r_write(struct bttv *btv,
4724                                unsigned char xaddr,
4725                                unsigned char yaddr,
4726                                unsigned char data) {
4727         unsigned int udata;
4728
4729         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4730         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4731         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4732         gpio_bits(0x1ff, udata);                /* strobe low */
4733 }
4734
4735 /*
4736  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4737  * use this routine.  The routine finds the "master" for the card, maps
4738  * the controller number from the detected position over to the logical
4739  * number, writes the appropriate data to the analog switch, and housekeeps
4740  * the local copy of the switch information.  The parameter 'input' is the
4741  * requested camera number (0 - 15).
4742  */
4743 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4744 {
4745         char *sw_status;
4746         int xaddr, yaddr;
4747         struct bttv *mctlr;
4748         static unsigned char map[4] = {3, 0, 2, 1};
4749
4750         mctlr = master[btv->c.nr];
4751         if (mctlr == NULL) {    /* ignore if master not yet detected */
4752                 return;
4753         }
4754         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4755         yaddr = map[yaddr];
4756         sw_status = (char *)(&mctlr->mbox_we);
4757         xaddr = input & 0xf;
4758         /* Check if the controller/camera pair has changed, else ignore */
4759         if (sw_status[yaddr] != xaddr)
4760         {
4761                 /* "open" the old switch, "close" the new one, save the new */
4762                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4763                 sw_status[yaddr] = xaddr;
4764                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4765         }
4766 }
4767
4768 /*
4769  * During initialisation, we need to reset the analog switch.  We
4770  * also preset the switch to map the 4 connectors on the card to the
4771  * *user's* (see above description of kodicom4400r_muxsel) channels
4772  * 0 through 3
4773  */
4774 static void kodicom4400r_init(struct bttv *btv)
4775 {
4776         char *sw_status = (char *)(&btv->mbox_we);
4777         int ix;
4778
4779         gpio_inout(0x0003ff, 0x0003ff);
4780         gpio_write(1 << 9);     /* reset MUX */
4781         gpio_write(0);
4782         /* Preset camera 0 to the 4 controllers */
4783         for (ix=0; ix<4; ix++) {
4784                 sw_status[ix] = ix;
4785                 kodicom4400r_write(btv, ix, ix, 1);
4786         }
4787         /*
4788          * Since this is the "master", we need to set up the
4789          * other three controller chips' pointers to this structure
4790          * for later use in the muxsel routine.
4791          */
4792         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4793             return;
4794         master[btv->c.nr-1] = btv;
4795         master[btv->c.nr]   = btv;
4796         master[btv->c.nr+1] = btv;
4797         master[btv->c.nr+2] = btv;
4798 }
4799
4800 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4801  * video multiplexers to provide up to 16 video inputs. These
4802  * multiplexers are controlled by the lower 8 GPIO pins of the
4803  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4804
4805  * xxx0 is pin xxx of multiplexer U5,
4806  * yyy1 is pin yyy of multiplexer U2
4807  */
4808 #define ENA0    0x01
4809 #define ENB0    0x02
4810 #define ENA1    0x04
4811 #define ENB1    0x08
4812
4813 #define IN10    0x10
4814 #define IN00    0x20
4815 #define IN11    0x40
4816 #define IN01    0x80
4817
4818 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4819 {
4820         static const int masks[] = {
4821                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4822                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4823                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4824                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4825         };
4826         gpio_write(masks[input%16]);
4827 }
4828 static void picolo_tetra_init(struct bttv *btv)
4829 {
4830         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4831         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4832         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4833 }
4834 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4835 {
4836
4837         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4838         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4839         /*GPIO[20]&GPIO[21] used to choose the right input*/
4840         btwrite (input<<20,BT848_GPIO_DATA);
4841
4842 }
4843
4844 /*
4845  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4846  *
4847  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4848  * swichers to provide 16 channels to MUX0. The TDA8540's have
4849  * 4 indepedant outputs and as such the IVC120G also has the
4850  * optional "Monitor Out" bus. This allows the card to be looking
4851  * at one input while the monitor is looking at another.
4852  *
4853  * Since I've couldn't be bothered figuring out how to add an
4854  * independant muxsel for the monitor bus, I've just set it to
4855  * whatever the card is looking at.
4856  *
4857  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4858  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4859  *
4860  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4861  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4862  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4863  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4864  *
4865  */
4866
4867 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4868 #define I2C_TDA8540        0x90
4869 #define I2C_TDA8540_ALT1   0x92
4870 #define I2C_TDA8540_ALT2   0x94
4871 #define I2C_TDA8540_ALT3   0x96
4872 #define I2C_TDA8540_ALT4   0x98
4873 #define I2C_TDA8540_ALT5   0x9a
4874 #define I2C_TDA8540_ALT6   0x9c
4875
4876 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4877 {
4878         /* Simple maths */
4879         int key = input % 4;
4880         int matrix = input / 4;
4881
4882         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4883                 btv->c.nr, input, matrix, key);
4884
4885         /* Handles the input selection on the TDA8540's */
4886         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4887                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4888         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4889                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4890         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4891                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4892         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4893                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4894
4895         /* Handles the output enables on the TDA8540's */
4896         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4897                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4898         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4899                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4900         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4901                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4902         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4903                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4904
4905         /* Selects MUX0 for input on the 878 */
4906         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4907 }
4908
4909
4910 /* PXC200 muxsel helper
4911  * luke@syseng.anu.edu.au
4912  * another transplant
4913  * from Alessandro Rubini (rubini@linux.it)
4914  *
4915  * There are 4 kinds of cards:
4916  * PXC200L which is bt848
4917  * PXC200F which is bt848 with PIC controlling mux
4918  * PXC200AL which is bt878
4919  * PXC200AF which is bt878 with PIC controlling mux
4920  */
4921 #define PX_CFG_PXC200F 0x01
4922 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4923 #define PX_I2C_PIC       0x0f
4924 #define PX_PXC200A_CARDID 0x200a1295
4925 #define PX_I2C_CMD_CFG   0x00
4926
4927 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4928 {
4929         int rc;
4930         long mux;
4931         int bitmask;
4932         unsigned char buf[2];
4933
4934         /* Read PIC config to determine if this is a PXC200F */
4935         /* PX_I2C_CMD_CFG*/
4936         buf[0]=0;
4937         buf[1]=0;
4938         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4939         if (rc) {
4940           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4941           /* not PXC ? do nothing */
4942           return;
4943         }
4944
4945         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4946         if (!(rc & PX_CFG_PXC200F)) {
4947           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4948           return;
4949         }
4950
4951
4952         /* The multiplexer in the 200F is handled by the GPIO port */
4953         /* get correct mapping between inputs  */
4954         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4955         /* ** not needed!?   */
4956         mux = input;
4957
4958         /* make sure output pins are enabled */
4959         /* bitmask=0x30f; */
4960         bitmask=0x302;
4961         /* check whether we have a PXC200A */
4962         if (btv->cardid == PX_PXC200A_CARDID)  {
4963            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4964            bitmask |= 7<<4; /* the DAC */
4965         }
4966         btwrite(bitmask, BT848_GPIO_OUT_EN);
4967
4968         bitmask = btread(BT848_GPIO_DATA);
4969         if (btv->cardid == PX_PXC200A_CARDID)
4970           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4971         else /* older device */
4972           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4973         btwrite(bitmask,BT848_GPIO_DATA);
4974
4975         /*
4976          * Was "to be safe, set the bt848 to input 0"
4977          * Actually, since it's ok at load time, better not messing
4978          * with these bits (on PXC200AF you need to set mux 2 here)
4979          *
4980          * needed because bttv-driver sets mux before calling this function
4981          */
4982         if (btv->cardid == PX_PXC200A_CARDID)
4983           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4984         else /* older device */
4985           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4986
4987         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4988 }
4989
4990 /* ----------------------------------------------------------------------- */
4991 /* motherboard chipset specific stuff                                      */
4992
4993 void __devinit bttv_check_chipset(void)
4994 {
4995         int pcipci_fail = 0;
4996         struct pci_dev *dev = NULL;
4997
4998         if (pci_pci_problems & PCIPCI_FAIL)
4999                 pcipci_fail = 1;
5000         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
5001                 triton1 = 1;
5002         if (pci_pci_problems & PCIPCI_VSFX)
5003                 vsfx = 1;
5004 #ifdef PCIPCI_ALIMAGIK
5005         if (pci_pci_problems & PCIPCI_ALIMAGIK)
5006                 latency = 0x0A;
5007 #endif
5008
5009
5010         /* print warnings about any quirks found */
5011         if (triton1)
5012                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5013         if (vsfx)
5014                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5015         if (pcipci_fail) {
5016                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5017                                                         "together.\n");
5018                 if (!no_overlay) {
5019                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
5020                         no_overlay = 1;
5021                 } else {
5022                         printk(KERN_INFO "bttv: overlay forced. Use this "
5023                                                 "option at your own risk.\n");
5024                 }
5025         }
5026         if (UNSET != latency)
5027                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5028         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5029                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
5030                 unsigned char b;
5031                 pci_read_config_byte(dev, 0x53, &b);
5032                 if (bttv_debug)
5033                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5034                                "bufcon=0x%02x\n",b);
5035         }
5036 }
5037
5038 int __devinit bttv_handle_chipset(struct bttv *btv)
5039 {
5040         unsigned char command;
5041
5042         if (!triton1 && !vsfx && UNSET == latency)
5043                 return 0;
5044
5045         if (bttv_verbose) {
5046                 if (triton1)
5047                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5048                 if (vsfx && btv->id >= 878)
5049                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5050                 if (UNSET != latency)
5051                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5052                                btv->c.nr,latency);
5053         }
5054
5055         if (btv->id < 878) {
5056                 /* bt848 (mis)uses a bit in the irq mask for etbf */
5057                 if (triton1)
5058                         btv->triton1 = BT848_INT_ETBF;
5059         } else {
5060                 /* bt878 has a bit in the pci config space for it */
5061                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5062                 if (triton1)
5063                         command |= BT878_EN_TBFX;
5064                 if (vsfx)
5065                         command |= BT878_EN_VSFX;
5066                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5067         }
5068         if (UNSET != latency)
5069                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
5070         return 0;
5071 }
5072
5073
5074 /*
5075  * Local variables:
5076  * c-basic-offset: 8
5077  * End:
5078  */