drivers/media/usb/au0828/au0828-cards.c

   1 /*
   2  *  Driver for the Auvitek USB bridge
   3  *
   4  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  */
  17
  18 #include "au0828.h"
  19 #include "au0828-cards.h"
  20 #include "au8522.h"
  21 #include "media/tuner.h"
  22 #include "media/v4l2-common.h"
  23
  24 static void hvr950q_cs5340_audio(void *priv, int enable)
  25 {
  26         /* Because the HVR-950q shares an i2s bus between the cs5340 and the
  27            au8522, we need to hold cs5340 in reset when using the au8522 */
  28         struct au0828_dev *dev = priv;
  29         if (enable == 1)
  30                 au0828_set(dev, REG_000, 0x10);
  31         else
  32                 au0828_clear(dev, REG_000, 0x10);
  33 }
  34
  35 /*
  36  * WARNING: There's a quirks table at sound/usb/quirks-table.h
  37  * that should also be updated every time a new device with V4L2 support
  38  * is added here.
  39  */
  40 struct au0828_board au0828_boards[] = {
  41         [AU0828_BOARD_UNKNOWN] = {
  42                 .name   = "Unknown board",
  43                 .tuner_type = -1U,
  44                 .tuner_addr = ADDR_UNSET,
  45         },
  46         [AU0828_BOARD_HAUPPAUGE_HVR850] = {
  47                 .name   = "Hauppauge HVR850",
  48                 .tuner_type = TUNER_XC5000,
  49                 .tuner_addr = 0x61,
  50                 .has_ir_i2c = 1,
  51                 .has_analog = 1,
  52                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
  53                 .input = {
  54                         {
  55                                 .type = AU0828_VMUX_TELEVISION,
  56                                 .vmux = AU8522_COMPOSITE_CH4_SIF,
  57                                 .amux = AU8522_AUDIO_SIF,
  58                         },
  59                         {
  60                                 .type = AU0828_VMUX_COMPOSITE,
  61                                 .vmux = AU8522_COMPOSITE_CH1,
  62                                 .amux = AU8522_AUDIO_NONE,
  63                                 .audio_setup = hvr950q_cs5340_audio,
  64                         },
  65                         {
  66                                 .type = AU0828_VMUX_SVIDEO,
  67                                 .vmux = AU8522_SVIDEO_CH13,
  68                                 .amux = AU8522_AUDIO_NONE,
  69                                 .audio_setup = hvr950q_cs5340_audio,
  70                         },
  71                 },
  72         },
  73         [AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
  74                 .name   = "Hauppauge HVR950Q",
  75                 .tuner_type = TUNER_XC5000,
  76                 .tuner_addr = 0x61,
  77                 .has_ir_i2c = 1,
  78                 .has_analog = 1,
  79                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
  80                 .input = {
  81                         {
  82                                 .type = AU0828_VMUX_TELEVISION,
  83                                 .vmux = AU8522_COMPOSITE_CH4_SIF,
  84                                 .amux = AU8522_AUDIO_SIF,
  85                         },
  86                         {
  87                                 .type = AU0828_VMUX_COMPOSITE,
  88                                 .vmux = AU8522_COMPOSITE_CH1,
  89                                 .amux = AU8522_AUDIO_NONE,
  90                                 .audio_setup = hvr950q_cs5340_audio,
  91                         },
  92                         {
  93                                 .type = AU0828_VMUX_SVIDEO,
  94                                 .vmux = AU8522_SVIDEO_CH13,
  95                                 .amux = AU8522_AUDIO_NONE,
  96                                 .audio_setup = hvr950q_cs5340_audio,
  97                         },
  98                 },
  99         },
 100         [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
 101                 .name   = "Hauppauge HVR950Q rev xxF8",
 102                 .tuner_type = TUNER_XC5000,
 103                 .tuner_addr = 0x61,
 104                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 105         },
 106         [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 107                 .name   = "DViCO FusionHDTV USB",
 108                 .tuner_type = TUNER_XC5000,
 109                 .tuner_addr = 0x61,
 110                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 111         },
 112         [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
 113                 .name = "Hauppauge Woodbury",
 114                 .tuner_type = TUNER_NXP_TDA18271,
 115                 .tuner_addr = 0x60,
 116                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 117         },
 118 };
 119
 120 /* Tuner callback function for au0828 boards. Currently only needed
 121  * for HVR1500Q, which has an xc5000 tuner.
 122  */
 123 int au0828_tuner_callback(void *priv, int component, int command, int arg)
 124 {
 125         struct au0828_dev *dev = priv;
 126
 127         dprintk(1, "%s()\n", __func__);
 128
 129         switch (dev->boardnr) {
 130         case AU0828_BOARD_HAUPPAUGE_HVR850:
 131         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 132         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 133         case AU0828_BOARD_DVICO_FUSIONHDTV7:
 134                 if (command == 0) {
 135                         /* Tuner Reset Command from xc5000 */
 136                         /* Drive the tuner into reset and out */
 137                         au0828_clear(dev, REG_001, 2);
 138                         mdelay(10);
 139                         au0828_set(dev, REG_001, 2);
 140                         mdelay(10);
 141                         return 0;
 142                 } else {
 143                         pr_err("%s(): Unknown command.\n", __func__);
 144                         return -EINVAL;
 145                 }
 146                 break;
 147         }
 148
 149         return 0; /* Should never be here */
 150 }
 151
 152 static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 153 {
 154         struct tveeprom tv;
 155
 156         tveeprom_hauppauge_analog(&tv, eeprom_data);
 157         dev->board.tuner_type = tv.tuner_type;
 158
 159         /* Make sure we support the board model */
 160         switch (tv.model) {
 161         case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
 162         case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 163         case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 164         case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 165         case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 166         case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 167         case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 168         case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 169         case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 170         case 72261: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 171         case 72271: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 172         case 72281: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 173         case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
 174         case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 175                 break;
 176         default:
 177                 pr_warn("%s: warning: unknown hauppauge model #%d\n",
 178                         __func__, tv.model);
 179                 break;
 180         }
 181
 182         pr_info("%s: hauppauge eeprom: model=%d\n",
 183                __func__, tv.model);
 184 }
 185
 186 void au0828_card_analog_fe_setup(struct au0828_dev *dev);
 187
 188 void au0828_card_setup(struct au0828_dev *dev)
 189 {
 190         static u8 eeprom[256];
 191
 192         dprintk(1, "%s()\n", __func__);
 193
 194         if (dev->i2c_rc == 0) {
 195                 dev->i2c_client.addr = 0xa0 >> 1;
 196                 tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
 197         }
 198
 199         switch (dev->boardnr) {
 200         case AU0828_BOARD_HAUPPAUGE_HVR850:
 201         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 202         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 203         case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 204                 if (dev->i2c_rc == 0)
 205                         hauppauge_eeprom(dev, eeprom+0xa0);
 206                 break;
 207         }
 208
 209         au0828_card_analog_fe_setup(dev);
 210 }
 211
 212 void au0828_card_analog_fe_setup(struct au0828_dev *dev)
 213 {
 214 #ifdef CONFIG_VIDEO_AU0828_V4L2
 215         struct tuner_setup tun_setup;
 216         struct v4l2_subdev *sd;
 217         unsigned int mode_mask = T_ANALOG_TV;
 218
 219         if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
 220                 /* Load the analog demodulator driver (note this would need to
 221                    be abstracted out if we ever need to support a different
 222                    demod) */
 223                 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 224                                 "au8522", 0x8e >> 1, NULL);
 225                 if (sd == NULL)
 226                         pr_err("analog subdev registration failed\n");
 227         }
 228
 229         /* Setup tuners */
 230         if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) {
 231                 /* Load the tuner module, which does the attach */
 232                 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 233                                 "tuner", dev->board.tuner_addr, NULL);
 234                 if (sd == NULL)
 235                         pr_err("tuner subdev registration fail\n");
 236
 237                 tun_setup.mode_mask      = mode_mask;
 238                 tun_setup.type           = dev->board.tuner_type;
 239                 tun_setup.addr           = dev->board.tuner_addr;
 240                 tun_setup.tuner_callback = au0828_tuner_callback;
 241                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
 242                                      &tun_setup);
 243         }
 244 #endif
 245 }
 246
 247 /*
 248  * The bridge has between 8 and 12 gpios.
 249  * Regs 1 and 0 deal with output enables.
 250  * Regs 3 and 2 deal with direction.
 251  */
 252 void au0828_gpio_setup(struct au0828_dev *dev)
 253 {
 254         dprintk(1, "%s()\n", __func__);
 255
 256         switch (dev->boardnr) {
 257         case AU0828_BOARD_HAUPPAUGE_HVR850:
 258         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 259         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 260         case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 261                 /* GPIO's
 262                  * 4 - CS5340
 263                  * 5 - AU8522 Demodulator
 264                  * 6 - eeprom W/P
 265                  * 7 - power supply
 266                  * 9 - XC5000 Tuner
 267                  */
 268
 269                 /* Set relevant GPIOs as outputs (leave the EEPROM W/P
 270                    as an input since we will never touch it and it has
 271                    a pullup) */
 272                 au0828_write(dev, REG_003, 0x02);
 273                 au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
 274
 275                 /* Into reset */
 276                 au0828_write(dev, REG_001, 0x0);
 277                 au0828_write(dev, REG_000, 0x0);
 278                 msleep(50);
 279
 280                 /* Bring power supply out of reset */
 281                 au0828_write(dev, REG_000, 0x80);
 282                 msleep(50);
 283
 284                 /* Bring xc5000 and au8522 out of reset (leave the
 285                    cs5340 in reset until needed) */
 286                 au0828_write(dev, REG_001, 0x02); /* xc5000 */
 287                 au0828_write(dev, REG_000, 0x80 | 0x20); /* PS + au8522 */
 288
 289                 msleep(250);
 290                 break;
 291         case AU0828_BOARD_DVICO_FUSIONHDTV7:
 292                 /* GPIO's
 293                  * 6 - ?
 294                  * 8 - AU8522 Demodulator
 295                  * 9 - XC5000 Tuner
 296                  */
 297
 298                 /* Into reset */
 299                 au0828_write(dev, REG_003, 0x02);
 300                 au0828_write(dev, REG_002, 0xa0);
 301                 au0828_write(dev, REG_001, 0x0);
 302                 au0828_write(dev, REG_000, 0x0);
 303                 msleep(100);
 304
 305                 /* Out of reset */
 306                 au0828_write(dev, REG_003, 0x02);
 307                 au0828_write(dev, REG_002, 0xa0);
 308                 au0828_write(dev, REG_001, 0x02);
 309                 au0828_write(dev, REG_000, 0xa0);
 310                 msleep(250);
 311                 break;
 312         }
 313 }
 314
 315 /* table of devices that work with this driver */
 316 struct usb_device_id au0828_usb_id_table[] = {
 317         { USB_DEVICE(0x2040, 0x7200),
 318                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 319         { USB_DEVICE(0x2040, 0x7240),
 320                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
 321         { USB_DEVICE(0x0fe9, 0xd620),
 322                 .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
 323         { USB_DEVICE(0x2040, 0x7210),
 324                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 325         { USB_DEVICE(0x2040, 0x7217),
 326                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 327         { USB_DEVICE(0x2040, 0x721b),
 328                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 329         { USB_DEVICE(0x2040, 0x721e),
 330                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 331         { USB_DEVICE(0x2040, 0x721f),
 332                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 333         { USB_DEVICE(0x2040, 0x7280),
 334                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 335         { USB_DEVICE(0x0fd9, 0x0008),
 336                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 337         { USB_DEVICE(0x2040, 0x7201),
 338                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 339         { USB_DEVICE(0x2040, 0x7211),
 340                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 341         { USB_DEVICE(0x2040, 0x7281),
 342                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 343         { USB_DEVICE(0x05e1, 0x0480),
 344                 .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 345         { USB_DEVICE(0x2040, 0x8200),
 346                 .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 347         { USB_DEVICE(0x2040, 0x7260),
 348                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 349         { USB_DEVICE(0x2040, 0x7213),
 350                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 351         { USB_DEVICE(0x2040, 0x7270),
 352                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 353         { },
 354 };
 355
 356 MODULE_DEVICE_TABLE(usb, au0828_usb_id_table);