treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
[sfrench/cifs-2.6.git] / drivers / media / rc / streamzap.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Streamzap Remote Control driver
4  *
5  * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
6  * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
7  *
8  * This driver was based on the work of Greg Wickham and Adrian
9  * Dewhurst. It was substantially rewritten to support correct signal
10  * gaps and now maintains a delay buffer, which is used to present
11  * consistent timing behaviour to user space applications. Without the
12  * delay buffer an ugly hack would be required in lircd, which can
13  * cause sluggish signal decoding in certain situations.
14  *
15  * Ported to in-kernel ir-core interface by Jarod Wilson
16  *
17  * This driver is based on the USB skeleton driver packaged with the
18  * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
19  */
20
21 #include <linux/device.h>
22 #include <linux/module.h>
23 #include <linux/slab.h>
24 #include <linux/ktime.h>
25 #include <linux/usb.h>
26 #include <linux/usb/input.h>
27 #include <media/rc-core.h>
28
29 #define DRIVER_VERSION  "1.61"
30 #define DRIVER_NAME     "streamzap"
31 #define DRIVER_DESC     "Streamzap Remote Control driver"
32
33 #define USB_STREAMZAP_VENDOR_ID         0x0e9c
34 #define USB_STREAMZAP_PRODUCT_ID        0x0000
35
36 /* table of devices that work with this driver */
37 static const struct usb_device_id streamzap_table[] = {
38         /* Streamzap Remote Control */
39         { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
40         /* Terminating entry */
41         { }
42 };
43
44 MODULE_DEVICE_TABLE(usb, streamzap_table);
45
46 #define SZ_PULSE_MASK 0xf0
47 #define SZ_SPACE_MASK 0x0f
48 #define SZ_TIMEOUT    0xff
49 #define SZ_RESOLUTION 256
50
51 /* number of samples buffered */
52 #define SZ_BUF_LEN 128
53
54 enum StreamzapDecoderState {
55         PulseSpace,
56         FullPulse,
57         FullSpace,
58         IgnorePulse
59 };
60
61 /* structure to hold our device specific stuff */
62 struct streamzap_ir {
63         /* ir-core */
64         struct rc_dev *rdev;
65
66         /* core device info */
67         struct device *dev;
68
69         /* usb */
70         struct usb_device       *usbdev;
71         struct usb_interface    *interface;
72         struct usb_endpoint_descriptor *endpoint;
73         struct urb              *urb_in;
74
75         /* buffer & dma */
76         unsigned char           *buf_in;
77         dma_addr_t              dma_in;
78         unsigned int            buf_in_len;
79
80         /* track what state we're in */
81         enum StreamzapDecoderState decoder_state;
82         /* tracks whether we are currently receiving some signal */
83         bool                    idle;
84         /* sum of signal lengths received since signal start */
85         unsigned long           sum;
86         /* start time of signal; necessary for gap tracking */
87         ktime_t                 signal_last;
88         ktime_t                 signal_start;
89         bool                    timeout_enabled;
90
91         char                    name[128];
92         char                    phys[64];
93 };
94
95
96 /* local function prototypes */
97 static int streamzap_probe(struct usb_interface *interface,
98                            const struct usb_device_id *id);
99 static void streamzap_disconnect(struct usb_interface *interface);
100 static void streamzap_callback(struct urb *urb);
101 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
102 static int streamzap_resume(struct usb_interface *intf);
103
104 /* usb specific object needed to register this driver with the usb subsystem */
105 static struct usb_driver streamzap_driver = {
106         .name =         DRIVER_NAME,
107         .probe =        streamzap_probe,
108         .disconnect =   streamzap_disconnect,
109         .suspend =      streamzap_suspend,
110         .resume =       streamzap_resume,
111         .id_table =     streamzap_table,
112 };
113
114 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
115 {
116         dev_dbg(sz->dev, "Storing %s with duration %u us\n",
117                 (rawir.pulse ? "pulse" : "space"), rawir.duration);
118         ir_raw_event_store_with_filter(sz->rdev, &rawir);
119 }
120
121 static void sz_push_full_pulse(struct streamzap_ir *sz,
122                                unsigned char value)
123 {
124         struct ir_raw_event rawir = {};
125
126         if (sz->idle) {
127                 int delta;
128
129                 sz->signal_last = sz->signal_start;
130                 sz->signal_start = ktime_get_real();
131
132                 delta = ktime_us_delta(sz->signal_start, sz->signal_last);
133                 rawir.pulse = false;
134                 if (delta > (15 * USEC_PER_SEC)) {
135                         /* really long time */
136                         rawir.duration = IR_MAX_DURATION;
137                 } else {
138                         rawir.duration = delta;
139                         rawir.duration -= sz->sum;
140                         rawir.duration = US_TO_NS(rawir.duration);
141                         rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
142                                          IR_MAX_DURATION : rawir.duration;
143                 }
144                 sz_push(sz, rawir);
145
146                 sz->idle = false;
147                 sz->sum = 0;
148         }
149
150         rawir.pulse = true;
151         rawir.duration = ((int) value) * SZ_RESOLUTION;
152         rawir.duration += SZ_RESOLUTION / 2;
153         sz->sum += rawir.duration;
154         rawir.duration = US_TO_NS(rawir.duration);
155         rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
156                          IR_MAX_DURATION : rawir.duration;
157         sz_push(sz, rawir);
158 }
159
160 static void sz_push_half_pulse(struct streamzap_ir *sz,
161                                unsigned char value)
162 {
163         sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
164 }
165
166 static void sz_push_full_space(struct streamzap_ir *sz,
167                                unsigned char value)
168 {
169         struct ir_raw_event rawir = {};
170
171         rawir.pulse = false;
172         rawir.duration = ((int) value) * SZ_RESOLUTION;
173         rawir.duration += SZ_RESOLUTION / 2;
174         sz->sum += rawir.duration;
175         rawir.duration = US_TO_NS(rawir.duration);
176         sz_push(sz, rawir);
177 }
178
179 static void sz_push_half_space(struct streamzap_ir *sz,
180                                unsigned long value)
181 {
182         sz_push_full_space(sz, value & SZ_SPACE_MASK);
183 }
184
185 /*
186  * streamzap_callback - usb IRQ handler callback
187  *
188  * This procedure is invoked on reception of data from
189  * the usb remote.
190  */
191 static void streamzap_callback(struct urb *urb)
192 {
193         struct streamzap_ir *sz;
194         unsigned int i;
195         int len;
196
197         if (!urb)
198                 return;
199
200         sz = urb->context;
201         len = urb->actual_length;
202
203         switch (urb->status) {
204         case -ECONNRESET:
205         case -ENOENT:
206         case -ESHUTDOWN:
207                 /*
208                  * this urb is terminated, clean up.
209                  * sz might already be invalid at this point
210                  */
211                 dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
212                 return;
213         default:
214                 break;
215         }
216
217         dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
218         for (i = 0; i < len; i++) {
219                 dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
220                         i, (unsigned char)sz->buf_in[i]);
221                 switch (sz->decoder_state) {
222                 case PulseSpace:
223                         if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
224                                 SZ_PULSE_MASK) {
225                                 sz->decoder_state = FullPulse;
226                                 continue;
227                         } else if ((sz->buf_in[i] & SZ_SPACE_MASK)
228                                         == SZ_SPACE_MASK) {
229                                 sz_push_half_pulse(sz, sz->buf_in[i]);
230                                 sz->decoder_state = FullSpace;
231                                 continue;
232                         } else {
233                                 sz_push_half_pulse(sz, sz->buf_in[i]);
234                                 sz_push_half_space(sz, sz->buf_in[i]);
235                         }
236                         break;
237                 case FullPulse:
238                         sz_push_full_pulse(sz, sz->buf_in[i]);
239                         sz->decoder_state = IgnorePulse;
240                         break;
241                 case FullSpace:
242                         if (sz->buf_in[i] == SZ_TIMEOUT) {
243                                 struct ir_raw_event rawir = {
244                                         .pulse = false,
245                                         .duration = sz->rdev->timeout
246                                 };
247                                 sz->idle = true;
248                                 if (sz->timeout_enabled)
249                                         sz_push(sz, rawir);
250                                 ir_raw_event_handle(sz->rdev);
251                                 ir_raw_event_reset(sz->rdev);
252                         } else {
253                                 sz_push_full_space(sz, sz->buf_in[i]);
254                         }
255                         sz->decoder_state = PulseSpace;
256                         break;
257                 case IgnorePulse:
258                         if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
259                                 SZ_SPACE_MASK) {
260                                 sz->decoder_state = FullSpace;
261                                 continue;
262                         }
263                         sz_push_half_space(sz, sz->buf_in[i]);
264                         sz->decoder_state = PulseSpace;
265                         break;
266                 }
267         }
268
269         ir_raw_event_handle(sz->rdev);
270         usb_submit_urb(urb, GFP_ATOMIC);
271
272         return;
273 }
274
275 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
276 {
277         struct rc_dev *rdev;
278         struct device *dev = sz->dev;
279         int ret;
280
281         rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
282         if (!rdev) {
283                 dev_err(dev, "remote dev allocation failed\n");
284                 goto out;
285         }
286
287         snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared Receiver (%04x:%04x)",
288                  le16_to_cpu(sz->usbdev->descriptor.idVendor),
289                  le16_to_cpu(sz->usbdev->descriptor.idProduct));
290         usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
291         strlcat(sz->phys, "/input0", sizeof(sz->phys));
292
293         rdev->device_name = sz->name;
294         rdev->input_phys = sz->phys;
295         usb_to_input_id(sz->usbdev, &rdev->input_id);
296         rdev->dev.parent = dev;
297         rdev->priv = sz;
298         rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
299         rdev->driver_name = DRIVER_NAME;
300         rdev->map_name = RC_MAP_STREAMZAP;
301
302         ret = rc_register_device(rdev);
303         if (ret < 0) {
304                 dev_err(dev, "remote input device register failed\n");
305                 goto out;
306         }
307
308         return rdev;
309
310 out:
311         rc_free_device(rdev);
312         return NULL;
313 }
314
315 /*
316  *      streamzap_probe
317  *
318  *      Called by usb-core to associated with a candidate device
319  *      On any failure the return value is the ERROR
320  *      On success return 0
321  */
322 static int streamzap_probe(struct usb_interface *intf,
323                            const struct usb_device_id *id)
324 {
325         struct usb_device *usbdev = interface_to_usbdev(intf);
326         struct usb_host_interface *iface_host;
327         struct streamzap_ir *sz = NULL;
328         char buf[63], name[128] = "";
329         int retval = -ENOMEM;
330         int pipe, maxp;
331
332         /* Allocate space for device driver specific data */
333         sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
334         if (!sz)
335                 return -ENOMEM;
336
337         sz->usbdev = usbdev;
338         sz->interface = intf;
339
340         /* Check to ensure endpoint information matches requirements */
341         iface_host = intf->cur_altsetting;
342
343         if (iface_host->desc.bNumEndpoints != 1) {
344                 dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
345                         __func__, iface_host->desc.bNumEndpoints);
346                 retval = -ENODEV;
347                 goto free_sz;
348         }
349
350         sz->endpoint = &(iface_host->endpoint[0].desc);
351         if (!usb_endpoint_dir_in(sz->endpoint)) {
352                 dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n",
353                         __func__, sz->endpoint->bEndpointAddress);
354                 retval = -ENODEV;
355                 goto free_sz;
356         }
357
358         if (!usb_endpoint_xfer_int(sz->endpoint)) {
359                 dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n",
360                         __func__, sz->endpoint->bmAttributes);
361                 retval = -ENODEV;
362                 goto free_sz;
363         }
364
365         pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
366         maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
367
368         if (maxp == 0) {
369                 dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
370                         __func__);
371                 retval = -ENODEV;
372                 goto free_sz;
373         }
374
375         /* Allocate the USB buffer and IRQ URB */
376         sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
377         if (!sz->buf_in)
378                 goto free_sz;
379
380         sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
381         if (!sz->urb_in)
382                 goto free_buf_in;
383
384         sz->dev = &intf->dev;
385         sz->buf_in_len = maxp;
386
387         if (usbdev->descriptor.iManufacturer
388             && usb_string(usbdev, usbdev->descriptor.iManufacturer,
389                           buf, sizeof(buf)) > 0)
390                 strscpy(name, buf, sizeof(name));
391
392         if (usbdev->descriptor.iProduct
393             && usb_string(usbdev, usbdev->descriptor.iProduct,
394                           buf, sizeof(buf)) > 0)
395                 snprintf(name + strlen(name), sizeof(name) - strlen(name),
396                          " %s", buf);
397
398         sz->rdev = streamzap_init_rc_dev(sz);
399         if (!sz->rdev)
400                 goto rc_dev_fail;
401
402         sz->idle = true;
403         sz->decoder_state = PulseSpace;
404         /* FIXME: don't yet have a way to set this */
405         sz->timeout_enabled = true;
406         sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
407                                 IR_MAX_DURATION) | 0x03000000);
408         #if 0
409         /* not yet supported, depends on patches from maxim */
410         /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
411         sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
412         sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
413         #endif
414
415         sz->signal_start = ktime_get_real();
416
417         /* Complete final initialisations */
418         usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
419                          maxp, (usb_complete_t)streamzap_callback,
420                          sz, sz->endpoint->bInterval);
421         sz->urb_in->transfer_dma = sz->dma_in;
422         sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
423
424         usb_set_intfdata(intf, sz);
425
426         if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
427                 dev_err(sz->dev, "urb submit failed\n");
428
429         dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
430                  usbdev->bus->busnum, usbdev->devnum);
431
432         return 0;
433
434 rc_dev_fail:
435         usb_free_urb(sz->urb_in);
436 free_buf_in:
437         usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
438 free_sz:
439         kfree(sz);
440
441         return retval;
442 }
443
444 /*
445  * streamzap_disconnect
446  *
447  * Called by the usb core when the device is removed from the system.
448  *
449  * This routine guarantees that the driver will not submit any more urbs
450  * by clearing dev->usbdev.  It is also supposed to terminate any currently
451  * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
452  * does not provide any way to do this.
453  */
454 static void streamzap_disconnect(struct usb_interface *interface)
455 {
456         struct streamzap_ir *sz = usb_get_intfdata(interface);
457         struct usb_device *usbdev = interface_to_usbdev(interface);
458
459         usb_set_intfdata(interface, NULL);
460
461         if (!sz)
462                 return;
463
464         sz->usbdev = NULL;
465         rc_unregister_device(sz->rdev);
466         usb_kill_urb(sz->urb_in);
467         usb_free_urb(sz->urb_in);
468         usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
469
470         kfree(sz);
471 }
472
473 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
474 {
475         struct streamzap_ir *sz = usb_get_intfdata(intf);
476
477         usb_kill_urb(sz->urb_in);
478
479         return 0;
480 }
481
482 static int streamzap_resume(struct usb_interface *intf)
483 {
484         struct streamzap_ir *sz = usb_get_intfdata(intf);
485
486         if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
487                 dev_err(sz->dev, "Error submitting urb\n");
488                 return -EIO;
489         }
490
491         return 0;
492 }
493
494 module_usb_driver(streamzap_driver);
495
496 MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
497 MODULE_DESCRIPTION(DRIVER_DESC);
498 MODULE_LICENSE("GPL");