Merge branch 'topic/hda-acomp-base' into for-next
[sfrench/cifs-2.6.git] / drivers / media / pci / saa7164 / saa7164-core.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Driver for the NXP SAA7164 PCIe bridge
4  *
5  *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
6  */
7
8 #include <linux/init.h>
9 #include <linux/list.h>
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/kmod.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/interrupt.h>
16 #include <linux/delay.h>
17 #include <asm/div64.h>
18
19 #ifdef CONFIG_PROC_FS
20 #include <linux/proc_fs.h>
21 #endif
22 #include "saa7164.h"
23
24 MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards");
25 MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>");
26 MODULE_LICENSE("GPL");
27
28 /*
29  *  1 Basic
30  *  2
31  *  4 i2c
32  *  8 api
33  * 16 cmd
34  * 32 bus
35  */
36
37 unsigned int saa_debug;
38 module_param_named(debug, saa_debug, int, 0644);
39 MODULE_PARM_DESC(debug, "enable debug messages");
40
41 static unsigned int fw_debug;
42 module_param(fw_debug, int, 0644);
43 MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2");
44
45 unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS;
46 module_param(encoder_buffers, int, 0644);
47 MODULE_PARM_DESC(encoder_buffers, "Total buffers in read queue 16-512 def:64");
48
49 unsigned int vbi_buffers = SAA7164_MAX_VBI_BUFFERS;
50 module_param(vbi_buffers, int, 0644);
51 MODULE_PARM_DESC(vbi_buffers, "Total buffers in read queue 16-512 def:64");
52
53 unsigned int waitsecs = 10;
54 module_param(waitsecs, int, 0644);
55 MODULE_PARM_DESC(waitsecs, "timeout on firmware messages");
56
57 static unsigned int card[]  = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET };
58 module_param_array(card,  int, NULL, 0444);
59 MODULE_PARM_DESC(card, "card type");
60
61 static unsigned int print_histogram = 64;
62 module_param(print_histogram, int, 0644);
63 MODULE_PARM_DESC(print_histogram, "print histogram values once");
64
65 unsigned int crc_checking = 1;
66 module_param(crc_checking, int, 0644);
67 MODULE_PARM_DESC(crc_checking, "enable crc sanity checking on buffers");
68
69 static unsigned int guard_checking = 1;
70 module_param(guard_checking, int, 0644);
71 MODULE_PARM_DESC(guard_checking,
72         "enable dma sanity checking for buffer overruns");
73
74 static bool enable_msi = true;
75 module_param(enable_msi, bool, 0444);
76 MODULE_PARM_DESC(enable_msi,
77                 "enable the use of an msi interrupt if available");
78
79 static unsigned int saa7164_devcount;
80
81 static DEFINE_MUTEX(devlist);
82 LIST_HEAD(saa7164_devlist);
83
84 #define INT_SIZE 16
85
86 static void saa7164_pack_verifier(struct saa7164_buffer *buf)
87 {
88         u8 *p = (u8 *)buf->cpu;
89         int i;
90
91         for (i = 0; i < buf->actual_size; i += 2048) {
92
93                 if ((*(p + i + 0) != 0x00) || (*(p + i + 1) != 0x00) ||
94                         (*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) {
95                         printk(KERN_ERR "No pack at 0x%x\n", i);
96 #if 0
97                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
98                                        p + 1, 32, false);
99 #endif
100                 }
101         }
102 }
103
104 #define FIXED_VIDEO_PID 0xf1
105 #define FIXED_AUDIO_PID 0xf2
106
107 static void saa7164_ts_verifier(struct saa7164_buffer *buf)
108 {
109         struct saa7164_port *port = buf->port;
110         u32 i;
111         u8 cc, a;
112         u16 pid;
113         u8 *bufcpu = (u8 *)buf->cpu;
114
115         port->sync_errors = 0;
116         port->v_cc_errors = 0;
117         port->a_cc_errors = 0;
118
119         for (i = 0; i < buf->actual_size; i += 188) {
120                 if (*(bufcpu + i) != 0x47)
121                         port->sync_errors++;
122
123                 /* TODO: Query pid lower 8 bits, ignoring upper bits intensionally */
124                 pid = ((*(bufcpu + i + 1) & 0x1f) << 8) | *(bufcpu + i + 2);
125                 cc = *(bufcpu + i + 3) & 0x0f;
126
127                 if (pid == FIXED_VIDEO_PID) {
128                         a = ((port->last_v_cc + 1) & 0x0f);
129                         if (a != cc) {
130                                 printk(KERN_ERR "video cc last = %x current = %x i = %d\n",
131                                         port->last_v_cc, cc, i);
132                                 port->v_cc_errors++;
133                         }
134
135                         port->last_v_cc = cc;
136                 } else
137                 if (pid == FIXED_AUDIO_PID) {
138                         a = ((port->last_a_cc + 1) & 0x0f);
139                         if (a != cc) {
140                                 printk(KERN_ERR "audio cc last = %x current = %x i = %d\n",
141                                         port->last_a_cc, cc, i);
142                                 port->a_cc_errors++;
143                         }
144
145                         port->last_a_cc = cc;
146                 }
147
148         }
149
150         /* Only report errors if we've been through this function at least
151          * once already and the cached cc values are primed. First time through
152          * always generates errors.
153          */
154         if (port->v_cc_errors && (port->done_first_interrupt > 1))
155                 printk(KERN_ERR "video pid cc, %d errors\n", port->v_cc_errors);
156
157         if (port->a_cc_errors && (port->done_first_interrupt > 1))
158                 printk(KERN_ERR "audio pid cc, %d errors\n", port->a_cc_errors);
159
160         if (port->sync_errors && (port->done_first_interrupt > 1))
161                 printk(KERN_ERR "sync_errors = %d\n", port->sync_errors);
162
163         if (port->done_first_interrupt == 1)
164                 port->done_first_interrupt++;
165 }
166
167 static void saa7164_histogram_reset(struct saa7164_histogram *hg, char *name)
168 {
169         int i;
170
171         memset(hg, 0, sizeof(struct saa7164_histogram));
172         strscpy(hg->name, name, sizeof(hg->name));
173
174         /* First 30ms x 1ms */
175         for (i = 0; i < 30; i++)
176                 hg->counter1[0 + i].val = i;
177
178         /* 30 - 200ms x 10ms  */
179         for (i = 0; i < 18; i++)
180                 hg->counter1[30 + i].val = 30 + (i * 10);
181
182         /* 200 - 2000ms x 100ms  */
183         for (i = 0; i < 15; i++)
184                 hg->counter1[48 + i].val = 200 + (i * 200);
185
186         /* Catch all massive value (2secs) */
187         hg->counter1[55].val = 2000;
188
189         /* Catch all massive value (4secs) */
190         hg->counter1[56].val = 4000;
191
192         /* Catch all massive value (8secs) */
193         hg->counter1[57].val = 8000;
194
195         /* Catch all massive value (15secs) */
196         hg->counter1[58].val = 15000;
197
198         /* Catch all massive value (30secs) */
199         hg->counter1[59].val = 30000;
200
201         /* Catch all massive value (60secs) */
202         hg->counter1[60].val = 60000;
203
204         /* Catch all massive value (5mins) */
205         hg->counter1[61].val = 300000;
206
207         /* Catch all massive value (15mins) */
208         hg->counter1[62].val = 900000;
209
210         /* Catch all massive values (1hr) */
211         hg->counter1[63].val = 3600000;
212 }
213
214 void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val)
215 {
216         int i;
217         for (i = 0; i < 64; i++) {
218                 if (val <= hg->counter1[i].val) {
219                         hg->counter1[i].count++;
220                         hg->counter1[i].update_time = jiffies;
221                         break;
222                 }
223         }
224 }
225
226 static void saa7164_histogram_print(struct saa7164_port *port,
227         struct saa7164_histogram *hg)
228 {
229         u32 entries = 0;
230         int i;
231
232         printk(KERN_ERR "Histogram named %s (ms, count, last_update_jiffy)\n", hg->name);
233         for (i = 0; i < 64; i++) {
234                 if (hg->counter1[i].count == 0)
235                         continue;
236
237                 printk(KERN_ERR " %4d %12d %Ld\n",
238                         hg->counter1[i].val,
239                         hg->counter1[i].count,
240                         hg->counter1[i].update_time);
241
242                 entries++;
243         }
244         printk(KERN_ERR "Total: %d\n", entries);
245 }
246
247 static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr)
248 {
249         struct saa7164_dev *dev = port->dev;
250         struct saa7164_buffer *buf = NULL;
251         struct saa7164_user_buffer *ubuf = NULL;
252         struct list_head *c, *n;
253         int i = 0;
254         u8 *p;
255
256         mutex_lock(&port->dmaqueue_lock);
257         list_for_each_safe(c, n, &port->dmaqueue.list) {
258
259                 buf = list_entry(c, struct saa7164_buffer, list);
260                 if (i++ > port->hwcfg.buffercount) {
261                         printk(KERN_ERR "%s() illegal i count %d\n",
262                                 __func__, i);
263                         break;
264                 }
265
266                 if (buf->idx == bufnr) {
267
268                         /* Found the buffer, deal with it */
269                         dprintk(DBGLVL_IRQ, "%s() bufnr: %d\n", __func__, bufnr);
270
271                         if (crc_checking) {
272                                 /* Throw a new checksum on the dma buffer */
273                                 buf->crc = crc32(0, buf->cpu, buf->actual_size);
274                         }
275
276                         if (guard_checking) {
277                                 p = (u8 *)buf->cpu;
278                                 if ((*(p + buf->actual_size + 0) != 0xff) ||
279                                         (*(p + buf->actual_size + 1) != 0xff) ||
280                                         (*(p + buf->actual_size + 2) != 0xff) ||
281                                         (*(p + buf->actual_size + 3) != 0xff) ||
282                                         (*(p + buf->actual_size + 0x10) != 0xff) ||
283                                         (*(p + buf->actual_size + 0x11) != 0xff) ||
284                                         (*(p + buf->actual_size + 0x12) != 0xff) ||
285                                         (*(p + buf->actual_size + 0x13) != 0xff)) {
286                                                 printk(KERN_ERR "%s() buf %p guard buffer breach\n",
287                                                         __func__, buf);
288 #if 0
289                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
290                                        p + buf->actual_size - 32, 64, false);
291 #endif
292                                 }
293                         }
294
295                         if ((port->nr != SAA7164_PORT_VBI1) && (port->nr != SAA7164_PORT_VBI2)) {
296                                 /* Validate the incoming buffer content */
297                                 if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_TS)
298                                         saa7164_ts_verifier(buf);
299                                 else if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS)
300                                         saa7164_pack_verifier(buf);
301                         }
302
303                         /* find a free user buffer and clone to it */
304                         if (!list_empty(&port->list_buf_free.list)) {
305
306                                 /* Pull the first buffer from the used list */
307                                 ubuf = list_first_entry(&port->list_buf_free.list,
308                                         struct saa7164_user_buffer, list);
309
310                                 if (buf->actual_size <= ubuf->actual_size) {
311
312                                         memcpy(ubuf->data, buf->cpu, ubuf->actual_size);
313
314                                         if (crc_checking) {
315                                                 /* Throw a new checksum on the read buffer */
316                                                 ubuf->crc = crc32(0, ubuf->data, ubuf->actual_size);
317                                         }
318
319                                         /* Requeue the buffer on the free list */
320                                         ubuf->pos = 0;
321
322                                         list_move_tail(&ubuf->list,
323                                                 &port->list_buf_used.list);
324
325                                         /* Flag any userland waiters */
326                                         wake_up_interruptible(&port->wait_read);
327
328                                 } else {
329                                         printk(KERN_ERR "buf %p bufsize fails match\n", buf);
330                                 }
331
332                         } else
333                                 printk(KERN_ERR "encirq no free buffers, increase param encoder_buffers\n");
334
335                         /* Ensure offset into buffer remains 0, fill buffer
336                          * with known bad data. We check for this data at a later point
337                          * in time. */
338                         saa7164_buffer_zero_offsets(port, bufnr);
339                         memset(buf->cpu, 0xff, buf->pci_size);
340                         if (crc_checking) {
341                                 /* Throw yet aanother new checksum on the dma buffer */
342                                 buf->crc = crc32(0, buf->cpu, buf->actual_size);
343                         }
344
345                         break;
346                 }
347         }
348         mutex_unlock(&port->dmaqueue_lock);
349 }
350
351 static void saa7164_work_enchandler(struct work_struct *w)
352 {
353         struct saa7164_port *port =
354                 container_of(w, struct saa7164_port, workenc);
355         struct saa7164_dev *dev = port->dev;
356
357         u32 wp, mcb, rp, cnt = 0;
358
359         port->last_svc_msecs_diff = port->last_svc_msecs;
360         port->last_svc_msecs = jiffies_to_msecs(jiffies);
361
362         port->last_svc_msecs_diff = port->last_svc_msecs -
363                 port->last_svc_msecs_diff;
364
365         saa7164_histogram_update(&port->svc_interval,
366                 port->last_svc_msecs_diff);
367
368         port->last_irq_svc_msecs_diff = port->last_svc_msecs -
369                 port->last_irq_msecs;
370
371         saa7164_histogram_update(&port->irq_svc_interval,
372                 port->last_irq_svc_msecs_diff);
373
374         dprintk(DBGLVL_IRQ,
375                 "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n",
376                 __func__,
377                 port->last_svc_msecs_diff,
378                 port->last_irq_svc_msecs_diff,
379                 port->last_svc_wp,
380                 port->last_svc_rp
381                 );
382
383         /* Current write position */
384         wp = saa7164_readl(port->bufcounter);
385         if (wp > (port->hwcfg.buffercount - 1)) {
386                 printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
387                 return;
388         }
389
390         /* Most current complete buffer */
391         if (wp == 0)
392                 mcb = (port->hwcfg.buffercount - 1);
393         else
394                 mcb = wp - 1;
395
396         while (1) {
397                 if (port->done_first_interrupt == 0) {
398                         port->done_first_interrupt++;
399                         rp = mcb;
400                 } else
401                         rp = (port->last_svc_rp + 1) % 8;
402
403                 if (rp > (port->hwcfg.buffercount - 1)) {
404                         printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
405                         break;
406                 }
407
408                 saa7164_work_enchandler_helper(port, rp);
409                 port->last_svc_rp = rp;
410                 cnt++;
411
412                 if (rp == mcb)
413                         break;
414         }
415
416         /* TODO: Convert this into a /proc/saa7164 style readable file */
417         if (print_histogram == port->nr) {
418                 saa7164_histogram_print(port, &port->irq_interval);
419                 saa7164_histogram_print(port, &port->svc_interval);
420                 saa7164_histogram_print(port, &port->irq_svc_interval);
421                 saa7164_histogram_print(port, &port->read_interval);
422                 saa7164_histogram_print(port, &port->poll_interval);
423                 /* TODO: fix this to preserve any previous state */
424                 print_histogram = 64 + port->nr;
425         }
426 }
427
428 static void saa7164_work_vbihandler(struct work_struct *w)
429 {
430         struct saa7164_port *port =
431                 container_of(w, struct saa7164_port, workenc);
432         struct saa7164_dev *dev = port->dev;
433
434         u32 wp, mcb, rp, cnt = 0;
435
436         port->last_svc_msecs_diff = port->last_svc_msecs;
437         port->last_svc_msecs = jiffies_to_msecs(jiffies);
438         port->last_svc_msecs_diff = port->last_svc_msecs -
439                 port->last_svc_msecs_diff;
440
441         saa7164_histogram_update(&port->svc_interval,
442                 port->last_svc_msecs_diff);
443
444         port->last_irq_svc_msecs_diff = port->last_svc_msecs -
445                 port->last_irq_msecs;
446
447         saa7164_histogram_update(&port->irq_svc_interval,
448                 port->last_irq_svc_msecs_diff);
449
450         dprintk(DBGLVL_IRQ,
451                 "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n",
452                 __func__,
453                 port->last_svc_msecs_diff,
454                 port->last_irq_svc_msecs_diff,
455                 port->last_svc_wp,
456                 port->last_svc_rp
457                 );
458
459         /* Current write position */
460         wp = saa7164_readl(port->bufcounter);
461         if (wp > (port->hwcfg.buffercount - 1)) {
462                 printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
463                 return;
464         }
465
466         /* Most current complete buffer */
467         if (wp == 0)
468                 mcb = (port->hwcfg.buffercount - 1);
469         else
470                 mcb = wp - 1;
471
472         while (1) {
473                 if (port->done_first_interrupt == 0) {
474                         port->done_first_interrupt++;
475                         rp = mcb;
476                 } else
477                         rp = (port->last_svc_rp + 1) % 8;
478
479                 if (rp > (port->hwcfg.buffercount - 1)) {
480                         printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
481                         break;
482                 }
483
484                 saa7164_work_enchandler_helper(port, rp);
485                 port->last_svc_rp = rp;
486                 cnt++;
487
488                 if (rp == mcb)
489                         break;
490         }
491
492         /* TODO: Convert this into a /proc/saa7164 style readable file */
493         if (print_histogram == port->nr) {
494                 saa7164_histogram_print(port, &port->irq_interval);
495                 saa7164_histogram_print(port, &port->svc_interval);
496                 saa7164_histogram_print(port, &port->irq_svc_interval);
497                 saa7164_histogram_print(port, &port->read_interval);
498                 saa7164_histogram_print(port, &port->poll_interval);
499                 /* TODO: fix this to preserve any previous state */
500                 print_histogram = 64 + port->nr;
501         }
502 }
503
504 static void saa7164_work_cmdhandler(struct work_struct *w)
505 {
506         struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd);
507
508         /* Wake up any complete commands */
509         saa7164_irq_dequeue(dev);
510 }
511
512 static void saa7164_buffer_deliver(struct saa7164_buffer *buf)
513 {
514         struct saa7164_port *port = buf->port;
515
516         /* Feed the transport payload into the kernel demux */
517         dvb_dmx_swfilter_packets(&port->dvb.demux, (u8 *)buf->cpu,
518                 SAA7164_TS_NUMBER_OF_LINES);
519
520 }
521
522 static irqreturn_t saa7164_irq_vbi(struct saa7164_port *port)
523 {
524         struct saa7164_dev *dev = port->dev;
525
526         /* Store old time */
527         port->last_irq_msecs_diff = port->last_irq_msecs;
528
529         /* Collect new stats */
530         port->last_irq_msecs = jiffies_to_msecs(jiffies);
531
532         /* Calculate stats */
533         port->last_irq_msecs_diff = port->last_irq_msecs -
534                 port->last_irq_msecs_diff;
535
536         saa7164_histogram_update(&port->irq_interval,
537                 port->last_irq_msecs_diff);
538
539         dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__,
540                 port->last_irq_msecs_diff);
541
542         /* Tis calls the vbi irq handler */
543         schedule_work(&port->workenc);
544         return 0;
545 }
546
547 static irqreturn_t saa7164_irq_encoder(struct saa7164_port *port)
548 {
549         struct saa7164_dev *dev = port->dev;
550
551         /* Store old time */
552         port->last_irq_msecs_diff = port->last_irq_msecs;
553
554         /* Collect new stats */
555         port->last_irq_msecs = jiffies_to_msecs(jiffies);
556
557         /* Calculate stats */
558         port->last_irq_msecs_diff = port->last_irq_msecs -
559                 port->last_irq_msecs_diff;
560
561         saa7164_histogram_update(&port->irq_interval,
562                 port->last_irq_msecs_diff);
563
564         dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__,
565                 port->last_irq_msecs_diff);
566
567         schedule_work(&port->workenc);
568         return 0;
569 }
570
571 static irqreturn_t saa7164_irq_ts(struct saa7164_port *port)
572 {
573         struct saa7164_dev *dev = port->dev;
574         struct saa7164_buffer *buf;
575         struct list_head *c, *n;
576         int wp, i = 0, rp;
577
578         /* Find the current write point from the hardware */
579         wp = saa7164_readl(port->bufcounter);
580         if (wp > (port->hwcfg.buffercount - 1))
581                 BUG();
582
583         /* Find the previous buffer to the current write point */
584         if (wp == 0)
585                 rp = (port->hwcfg.buffercount - 1);
586         else
587                 rp = wp - 1;
588
589         /* Lookup the WP in the buffer list */
590         /* TODO: turn this into a worker thread */
591         list_for_each_safe(c, n, &port->dmaqueue.list) {
592                 buf = list_entry(c, struct saa7164_buffer, list);
593                 if (i++ > port->hwcfg.buffercount)
594                         BUG();
595
596                 if (buf->idx == rp) {
597                         /* Found the buffer, deal with it */
598                         dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n",
599                                 __func__, wp, rp);
600                         saa7164_buffer_deliver(buf);
601                         break;
602                 }
603
604         }
605         return 0;
606 }
607
608 /* Primary IRQ handler and dispatch mechanism */
609 static irqreturn_t saa7164_irq(int irq, void *dev_id)
610 {
611         struct saa7164_dev *dev = dev_id;
612         struct saa7164_port *porta, *portb, *portc, *portd, *porte, *portf;
613
614         u32 intid, intstat[INT_SIZE/4];
615         int i, handled = 0, bit;
616
617         if (dev == NULL) {
618                 printk(KERN_ERR "%s() No device specified\n", __func__);
619                 handled = 0;
620                 goto out;
621         }
622
623         porta = &dev->ports[SAA7164_PORT_TS1];
624         portb = &dev->ports[SAA7164_PORT_TS2];
625         portc = &dev->ports[SAA7164_PORT_ENC1];
626         portd = &dev->ports[SAA7164_PORT_ENC2];
627         porte = &dev->ports[SAA7164_PORT_VBI1];
628         portf = &dev->ports[SAA7164_PORT_VBI2];
629
630         /* Check that the hardware is accessible. If the status bytes are
631          * 0xFF then the device is not accessible, the the IRQ belongs
632          * to another driver.
633          * 4 x u32 interrupt registers.
634          */
635         for (i = 0; i < INT_SIZE/4; i++) {
636
637                 /* TODO: Convert into saa7164_readl() */
638                 /* Read the 4 hardware interrupt registers */
639                 intstat[i] = saa7164_readl(dev->int_status + (i * 4));
640
641                 if (intstat[i])
642                         handled = 1;
643         }
644         if (handled == 0)
645                 goto out;
646
647         /* For each of the HW interrupt registers */
648         for (i = 0; i < INT_SIZE/4; i++) {
649
650                 if (intstat[i]) {
651                         /* Each function of the board has it's own interruptid.
652                          * Find the function that triggered then call
653                          * it's handler.
654                          */
655                         for (bit = 0; bit < 32; bit++) {
656
657                                 if (((intstat[i] >> bit) & 0x00000001) == 0)
658                                         continue;
659
660                                 /* Calculate the interrupt id (0x00 to 0x7f) */
661
662                                 intid = (i * 32) + bit;
663                                 if (intid == dev->intfdesc.bInterruptId) {
664                                         /* A response to an cmd/api call */
665                                         schedule_work(&dev->workcmd);
666                                 } else if (intid == porta->hwcfg.interruptid) {
667
668                                         /* Transport path 1 */
669                                         saa7164_irq_ts(porta);
670
671                                 } else if (intid == portb->hwcfg.interruptid) {
672
673                                         /* Transport path 2 */
674                                         saa7164_irq_ts(portb);
675
676                                 } else if (intid == portc->hwcfg.interruptid) {
677
678                                         /* Encoder path 1 */
679                                         saa7164_irq_encoder(portc);
680
681                                 } else if (intid == portd->hwcfg.interruptid) {
682
683                                         /* Encoder path 2 */
684                                         saa7164_irq_encoder(portd);
685
686                                 } else if (intid == porte->hwcfg.interruptid) {
687
688                                         /* VBI path 1 */
689                                         saa7164_irq_vbi(porte);
690
691                                 } else if (intid == portf->hwcfg.interruptid) {
692
693                                         /* VBI path 2 */
694                                         saa7164_irq_vbi(portf);
695
696                                 } else {
697                                         /* Find the function */
698                                         dprintk(DBGLVL_IRQ,
699                                                 "%s() unhandled interrupt reg 0x%x bit 0x%x intid = 0x%x\n",
700                                                 __func__, i, bit, intid);
701                                 }
702                         }
703
704                         /* Ack it */
705                         saa7164_writel(dev->int_ack + (i * 4), intstat[i]);
706
707                 }
708         }
709 out:
710         return IRQ_RETVAL(handled);
711 }
712
713 void saa7164_getfirmwarestatus(struct saa7164_dev *dev)
714 {
715         struct saa7164_fw_status *s = &dev->fw_status;
716
717         dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS);
718         dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE);
719         dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC);
720         dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST);
721         dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD);
722         dev->fw_status.remainheap =
723                 saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP);
724
725         dprintk(1, "Firmware status:\n");
726         dprintk(1, " .status     = 0x%08x\n", s->status);
727         dprintk(1, " .mode       = 0x%08x\n", s->mode);
728         dprintk(1, " .spec       = 0x%08x\n", s->spec);
729         dprintk(1, " .inst       = 0x%08x\n", s->inst);
730         dprintk(1, " .cpuload    = 0x%08x\n", s->cpuload);
731         dprintk(1, " .remainheap = 0x%08x\n", s->remainheap);
732 }
733
734 u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev)
735 {
736         u32 reg;
737
738         reg = saa7164_readl(SAA_DEVICE_VERSION);
739         dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n",
740                 (reg & 0x0000fc00) >> 10,
741                 (reg & 0x000003e0) >> 5,
742                 (reg & 0x0000001f),
743                 (reg & 0xffff0000) >> 16,
744                 reg);
745
746         return reg;
747 }
748
749 /* TODO: Debugging func, remove */
750 void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
751 {
752         int i;
753
754         dprintk(1, "--------------------> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
755
756         for (i = 0; i < 0x100; i += 16)
757                 dprintk(1, "region0[0x%08x] = %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
758                         i,
759                         (u8)saa7164_readb(addr + i + 0),
760                         (u8)saa7164_readb(addr + i + 1),
761                         (u8)saa7164_readb(addr + i + 2),
762                         (u8)saa7164_readb(addr + i + 3),
763                         (u8)saa7164_readb(addr + i + 4),
764                         (u8)saa7164_readb(addr + i + 5),
765                         (u8)saa7164_readb(addr + i + 6),
766                         (u8)saa7164_readb(addr + i + 7),
767                         (u8)saa7164_readb(addr + i + 8),
768                         (u8)saa7164_readb(addr + i + 9),
769                         (u8)saa7164_readb(addr + i + 10),
770                         (u8)saa7164_readb(addr + i + 11),
771                         (u8)saa7164_readb(addr + i + 12),
772                         (u8)saa7164_readb(addr + i + 13),
773                         (u8)saa7164_readb(addr + i + 14),
774                         (u8)saa7164_readb(addr + i + 15)
775                         );
776 }
777
778 static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
779 {
780         dprintk(1, "@0x%p hwdesc sizeof(struct tmComResHWDescr) = %d bytes\n",
781                 &dev->hwdesc, (u32)sizeof(struct tmComResHWDescr));
782
783         dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength);
784         dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType);
785         dprintk(1, " .bDescriptorSubtype = 0x%x\n",
786                 dev->hwdesc.bDescriptorSubtype);
787
788         dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion);
789         dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency);
790         dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes);
791         dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities);
792         dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n",
793                 dev->hwdesc.dwDeviceRegistersLocation);
794
795         dprintk(1, " .dwHostMemoryRegion = 0x%x\n",
796                 dev->hwdesc.dwHostMemoryRegion);
797
798         dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n",
799                 dev->hwdesc.dwHostMemoryRegionSize);
800
801         dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n",
802                 dev->hwdesc.dwHostHibernatMemRegion);
803
804         dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n",
805                 dev->hwdesc.dwHostHibernatMemRegionSize);
806 }
807
808 static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
809 {
810         dprintk(1, "@0x%p intfdesc sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
811                 &dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr));
812
813         dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
814         dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType);
815         dprintk(1, " .bDescriptorSubtype = 0x%x\n",
816                 dev->intfdesc.bDescriptorSubtype);
817
818         dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags);
819         dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType);
820         dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId);
821         dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface);
822         dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId);
823         dprintk(1, " .bDebugInterruptId = 0x%x\n",
824                 dev->intfdesc.bDebugInterruptId);
825
826         dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation);
827 }
828
829 static void saa7164_dump_busdesc(struct saa7164_dev *dev)
830 {
831         dprintk(1, "@0x%p busdesc sizeof(struct tmComResBusDescr) = %d bytes\n",
832                 &dev->busdesc, (u32)sizeof(struct tmComResBusDescr));
833
834         dprintk(1, " .CommandRing   = 0x%016Lx\n", dev->busdesc.CommandRing);
835         dprintk(1, " .ResponseRing  = 0x%016Lx\n", dev->busdesc.ResponseRing);
836         dprintk(1, " .CommandWrite  = 0x%x\n", dev->busdesc.CommandWrite);
837         dprintk(1, " .CommandRead   = 0x%x\n", dev->busdesc.CommandRead);
838         dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite);
839         dprintk(1, " .ResponseRead  = 0x%x\n", dev->busdesc.ResponseRead);
840 }
841
842 /* Much of the hardware configuration and PCI registers are configured
843  * dynamically depending on firmware. We have to cache some initial
844  * structures then use these to locate other important structures
845  * from PCI space.
846  */
847 static void saa7164_get_descriptors(struct saa7164_dev *dev)
848 {
849         memcpy_fromio(&dev->hwdesc, dev->bmmio, sizeof(struct tmComResHWDescr));
850         memcpy_fromio(&dev->intfdesc, dev->bmmio + sizeof(struct tmComResHWDescr),
851                 sizeof(struct tmComResInterfaceDescr));
852         memcpy_fromio(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation,
853                 sizeof(struct tmComResBusDescr));
854
855         if (dev->hwdesc.bLength != sizeof(struct tmComResHWDescr)) {
856                 printk(KERN_ERR "Structure struct tmComResHWDescr is mangled\n");
857                 printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength,
858                         (u32)sizeof(struct tmComResHWDescr));
859         } else
860                 saa7164_dump_hwdesc(dev);
861
862         if (dev->intfdesc.bLength != sizeof(struct tmComResInterfaceDescr)) {
863                 printk(KERN_ERR "struct struct tmComResInterfaceDescr is mangled\n");
864                 printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength,
865                         (u32)sizeof(struct tmComResInterfaceDescr));
866         } else
867                 saa7164_dump_intfdesc(dev);
868
869         saa7164_dump_busdesc(dev);
870 }
871
872 static int saa7164_pci_quirks(struct saa7164_dev *dev)
873 {
874         return 0;
875 }
876
877 static int get_resources(struct saa7164_dev *dev)
878 {
879         if (request_mem_region(pci_resource_start(dev->pci, 0),
880                 pci_resource_len(dev->pci, 0), dev->name)) {
881
882                 if (request_mem_region(pci_resource_start(dev->pci, 2),
883                         pci_resource_len(dev->pci, 2), dev->name))
884                         return 0;
885         }
886
887         printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n",
888                 dev->name,
889                 (u64)pci_resource_start(dev->pci, 0),
890                 (u64)pci_resource_start(dev->pci, 2));
891
892         return -EBUSY;
893 }
894
895 static int saa7164_port_init(struct saa7164_dev *dev, int portnr)
896 {
897         struct saa7164_port *port = NULL;
898
899         if ((portnr < 0) || (portnr >= SAA7164_MAX_PORTS))
900                 BUG();
901
902         port = &dev->ports[portnr];
903
904         port->dev = dev;
905         port->nr = portnr;
906
907         if ((portnr == SAA7164_PORT_TS1) || (portnr == SAA7164_PORT_TS2))
908                 port->type = SAA7164_MPEG_DVB;
909         else
910         if ((portnr == SAA7164_PORT_ENC1) || (portnr == SAA7164_PORT_ENC2)) {
911                 port->type = SAA7164_MPEG_ENCODER;
912
913                 /* We need a deferred interrupt handler for cmd handling */
914                 INIT_WORK(&port->workenc, saa7164_work_enchandler);
915         } else if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
916                 port->type = SAA7164_MPEG_VBI;
917
918                 /* We need a deferred interrupt handler for cmd handling */
919                 INIT_WORK(&port->workenc, saa7164_work_vbihandler);
920         } else
921                 BUG();
922
923         /* Init all the critical resources */
924         mutex_init(&port->dvb.lock);
925         INIT_LIST_HEAD(&port->dmaqueue.list);
926         mutex_init(&port->dmaqueue_lock);
927
928         INIT_LIST_HEAD(&port->list_buf_used.list);
929         INIT_LIST_HEAD(&port->list_buf_free.list);
930         init_waitqueue_head(&port->wait_read);
931
932
933         saa7164_histogram_reset(&port->irq_interval, "irq intervals");
934         saa7164_histogram_reset(&port->svc_interval, "deferred intervals");
935         saa7164_histogram_reset(&port->irq_svc_interval,
936                 "irq to deferred intervals");
937         saa7164_histogram_reset(&port->read_interval,
938                 "encoder/vbi read() intervals");
939         saa7164_histogram_reset(&port->poll_interval,
940                 "encoder/vbi poll() intervals");
941
942         return 0;
943 }
944
945 static int saa7164_dev_setup(struct saa7164_dev *dev)
946 {
947         int i;
948
949         mutex_init(&dev->lock);
950         atomic_inc(&dev->refcount);
951         dev->nr = saa7164_devcount++;
952
953         snprintf(dev->name, sizeof(dev->name), "saa7164[%d]", dev->nr);
954
955         mutex_lock(&devlist);
956         list_add_tail(&dev->devlist, &saa7164_devlist);
957         mutex_unlock(&devlist);
958
959         /* board config */
960         dev->board = UNSET;
961         if (card[dev->nr] < saa7164_bcount)
962                 dev->board = card[dev->nr];
963
964         for (i = 0; UNSET == dev->board  &&  i < saa7164_idcount; i++)
965                 if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor &&
966                         dev->pci->subsystem_device ==
967                                 saa7164_subids[i].subdevice)
968                                 dev->board = saa7164_subids[i].card;
969
970         if (UNSET == dev->board) {
971                 dev->board = SAA7164_BOARD_UNKNOWN;
972                 saa7164_card_list(dev);
973         }
974
975         dev->pci_bus  = dev->pci->bus->number;
976         dev->pci_slot = PCI_SLOT(dev->pci->devfn);
977
978         /* I2C Defaults / setup */
979         dev->i2c_bus[0].dev = dev;
980         dev->i2c_bus[0].nr = 0;
981         dev->i2c_bus[1].dev = dev;
982         dev->i2c_bus[1].nr = 1;
983         dev->i2c_bus[2].dev = dev;
984         dev->i2c_bus[2].nr = 2;
985
986         /* Transport + Encoder ports 1, 2, 3, 4 - Defaults / setup */
987         saa7164_port_init(dev, SAA7164_PORT_TS1);
988         saa7164_port_init(dev, SAA7164_PORT_TS2);
989         saa7164_port_init(dev, SAA7164_PORT_ENC1);
990         saa7164_port_init(dev, SAA7164_PORT_ENC2);
991         saa7164_port_init(dev, SAA7164_PORT_VBI1);
992         saa7164_port_init(dev, SAA7164_PORT_VBI2);
993
994         if (get_resources(dev) < 0) {
995                 printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
996                        dev->name, dev->pci->subsystem_vendor,
997                        dev->pci->subsystem_device);
998
999                 saa7164_devcount--;
1000                 return -ENODEV;
1001         }
1002
1003         /* PCI/e allocations */
1004         dev->lmmio = ioremap(pci_resource_start(dev->pci, 0),
1005                              pci_resource_len(dev->pci, 0));
1006
1007         dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2),
1008                              pci_resource_len(dev->pci, 2));
1009
1010         dev->bmmio = (u8 __iomem *)dev->lmmio;
1011         dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
1012
1013         /* Interrupt and ack register locations offset of bmmio */
1014         dev->int_status = 0x183000 + 0xf80;
1015         dev->int_ack = 0x183000 + 0xf90;
1016
1017         printk(KERN_INFO
1018                 "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
1019                dev->name, dev->pci->subsystem_vendor,
1020                dev->pci->subsystem_device, saa7164_boards[dev->board].name,
1021                dev->board, card[dev->nr] == dev->board ?
1022                "insmod option" : "autodetected");
1023
1024         saa7164_pci_quirks(dev);
1025
1026         return 0;
1027 }
1028
1029 static void saa7164_dev_unregister(struct saa7164_dev *dev)
1030 {
1031         dprintk(1, "%s()\n", __func__);
1032
1033         release_mem_region(pci_resource_start(dev->pci, 0),
1034                 pci_resource_len(dev->pci, 0));
1035
1036         release_mem_region(pci_resource_start(dev->pci, 2),
1037                 pci_resource_len(dev->pci, 2));
1038
1039         if (!atomic_dec_and_test(&dev->refcount))
1040                 return;
1041
1042         iounmap(dev->lmmio);
1043         iounmap(dev->lmmio2);
1044
1045         return;
1046 }
1047
1048 #ifdef CONFIG_PROC_FS
1049 static int saa7164_proc_show(struct seq_file *m, void *v)
1050 {
1051         struct saa7164_dev *dev;
1052         struct tmComResBusInfo *b;
1053         struct list_head *list;
1054         int i, c;
1055
1056         if (saa7164_devcount == 0)
1057                 return 0;
1058
1059         list_for_each(list, &saa7164_devlist) {
1060                 dev = list_entry(list, struct saa7164_dev, devlist);
1061                 seq_printf(m, "%s = %p\n", dev->name, dev);
1062
1063                 /* Lock the bus from any other access */
1064                 b = &dev->bus;
1065                 mutex_lock(&b->lock);
1066
1067                 seq_printf(m, " .m_pdwSetWritePos = 0x%x (0x%08x)\n",
1068                         b->m_dwSetReadPos, saa7164_readl(b->m_dwSetReadPos));
1069
1070                 seq_printf(m, " .m_pdwSetReadPos  = 0x%x (0x%08x)\n",
1071                         b->m_dwSetWritePos, saa7164_readl(b->m_dwSetWritePos));
1072
1073                 seq_printf(m, " .m_pdwGetWritePos = 0x%x (0x%08x)\n",
1074                         b->m_dwGetReadPos, saa7164_readl(b->m_dwGetReadPos));
1075
1076                 seq_printf(m, " .m_pdwGetReadPos  = 0x%x (0x%08x)\n",
1077                         b->m_dwGetWritePos, saa7164_readl(b->m_dwGetWritePos));
1078                 c = 0;
1079                 seq_printf(m, "\n  Set Ring:\n");
1080                 seq_printf(m, "\n addr  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
1081                 for (i = 0; i < b->m_dwSizeSetRing; i++) {
1082                         if (c == 0)
1083                                 seq_printf(m, " %04x:", i);
1084
1085                         seq_printf(m, " %02x", readb(b->m_pdwSetRing + i));
1086
1087                         if (++c == 16) {
1088                                 seq_printf(m, "\n");
1089                                 c = 0;
1090                         }
1091                 }
1092
1093                 c = 0;
1094                 seq_printf(m, "\n  Get Ring:\n");
1095                 seq_printf(m, "\n addr  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
1096                 for (i = 0; i < b->m_dwSizeGetRing; i++) {
1097                         if (c == 0)
1098                                 seq_printf(m, " %04x:", i);
1099
1100                         seq_printf(m, " %02x", readb(b->m_pdwGetRing + i));
1101
1102                         if (++c == 16) {
1103                                 seq_printf(m, "\n");
1104                                 c = 0;
1105                         }
1106                 }
1107
1108                 mutex_unlock(&b->lock);
1109
1110         }
1111
1112         return 0;
1113 }
1114
1115 static struct proc_dir_entry *saa7164_pe;
1116
1117 static int saa7164_proc_create(void)
1118 {
1119         saa7164_pe = proc_create_single("saa7164", 0444, NULL, saa7164_proc_show);
1120         if (!saa7164_pe)
1121                 return -ENOMEM;
1122
1123         return 0;
1124 }
1125
1126 static void saa7164_proc_destroy(void)
1127 {
1128         if (saa7164_pe)
1129                 remove_proc_entry("saa7164", NULL);
1130 }
1131 #else
1132 static int saa7164_proc_create(void) { return 0; }
1133 static void saa7164_proc_destroy(void) {}
1134 #endif
1135
1136 static int saa7164_thread_function(void *data)
1137 {
1138         struct saa7164_dev *dev = data;
1139         struct tmFwInfoStruct fwinfo;
1140         u64 last_poll_time = 0;
1141
1142         dprintk(DBGLVL_THR, "thread started\n");
1143
1144         set_freezable();
1145
1146         while (1) {
1147                 msleep_interruptible(100);
1148                 if (kthread_should_stop())
1149                         break;
1150                 try_to_freeze();
1151
1152                 dprintk(DBGLVL_THR, "thread running\n");
1153
1154                 /* Dump the firmware debug message to console */
1155                 /* Polling this costs us 1-2% of the arm CPU */
1156                 /* convert this into a respnde to interrupt 0x7a */
1157                 saa7164_api_collect_debug(dev);
1158
1159                 /* Monitor CPU load every 1 second */
1160                 if ((last_poll_time + 1000 /* ms */) < jiffies_to_msecs(jiffies)) {
1161                         saa7164_api_get_load_info(dev, &fwinfo);
1162                         last_poll_time = jiffies_to_msecs(jiffies);
1163                 }
1164
1165         }
1166
1167         dprintk(DBGLVL_THR, "thread exiting\n");
1168         return 0;
1169 }
1170
1171 static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
1172 {
1173         int err;
1174
1175         if (!enable_msi) {
1176                 printk(KERN_WARNING "%s() MSI disabled by module parameter 'enable_msi'"
1177                        , __func__);
1178                 return false;
1179         }
1180
1181         err = pci_enable_msi(pci_dev);
1182
1183         if (err) {
1184                 printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n",
1185                        __func__);
1186                 return false;
1187         }
1188
1189         /* no error - so request an msi interrupt */
1190         err = request_irq(pci_dev->irq, saa7164_irq, 0,
1191                                                 dev->name, dev);
1192
1193         if (err) {
1194                 /* fall back to legacy interrupt */
1195                 printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n",
1196                        __func__);
1197                 pci_disable_msi(pci_dev);
1198                 return false;
1199         }
1200
1201         return true;
1202 }
1203
1204 static int saa7164_initdev(struct pci_dev *pci_dev,
1205                            const struct pci_device_id *pci_id)
1206 {
1207         struct saa7164_dev *dev;
1208         int err, i;
1209         u32 version;
1210
1211         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1212         if (NULL == dev)
1213                 return -ENOMEM;
1214
1215         err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
1216         if (err < 0) {
1217                 dev_err(&pci_dev->dev, "v4l2_device_register failed\n");
1218                 goto fail_free;
1219         }
1220
1221         /* pci init */
1222         dev->pci = pci_dev;
1223         if (pci_enable_device(pci_dev)) {
1224                 err = -EIO;
1225                 goto fail_free;
1226         }
1227
1228         if (saa7164_dev_setup(dev) < 0) {
1229                 err = -EINVAL;
1230                 goto fail_free;
1231         }
1232
1233         /* print pci info */
1234         dev->pci_rev = pci_dev->revision;
1235         pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
1236         printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
1237                dev->name,
1238                pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
1239                dev->pci_lat,
1240                 (unsigned long long)pci_resource_start(pci_dev, 0));
1241
1242         pci_set_master(pci_dev);
1243         /* TODO */
1244         err = pci_set_dma_mask(pci_dev, 0xffffffff);
1245         if (err) {
1246                 printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
1247                 goto fail_irq;
1248         }
1249
1250         /* irq bit */
1251         if (saa7164_enable_msi(pci_dev, dev)) {
1252                 dev->msi = true;
1253         } else {
1254                 /* if we have an error (i.e. we don't have an interrupt)
1255                          or msi is not enabled - fallback to shared interrupt */
1256
1257                 err = request_irq(pci_dev->irq, saa7164_irq,
1258                                 IRQF_SHARED, dev->name, dev);
1259
1260                 if (err < 0) {
1261                         printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name,
1262                                pci_dev->irq);
1263                         err = -EIO;
1264                         goto fail_irq;
1265                 }
1266         }
1267
1268         pci_set_drvdata(pci_dev, dev);
1269
1270         /* Init the internal command list */
1271         for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
1272                 dev->cmds[i].seqno = i;
1273                 dev->cmds[i].inuse = 0;
1274                 mutex_init(&dev->cmds[i].lock);
1275                 init_waitqueue_head(&dev->cmds[i].wait);
1276         }
1277
1278         /* We need a deferred interrupt handler for cmd handling */
1279         INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler);
1280
1281         /* Only load the firmware if we know the board */
1282         if (dev->board != SAA7164_BOARD_UNKNOWN) {
1283
1284                 err = saa7164_downloadfirmware(dev);
1285                 if (err < 0) {
1286                         printk(KERN_ERR
1287                                 "Failed to boot firmware, no features registered\n");
1288                         goto fail_fw;
1289                 }
1290
1291                 saa7164_get_descriptors(dev);
1292                 saa7164_dumpregs(dev, 0);
1293                 saa7164_getcurrentfirmwareversion(dev);
1294                 saa7164_getfirmwarestatus(dev);
1295                 err = saa7164_bus_setup(dev);
1296                 if (err < 0)
1297                         printk(KERN_ERR
1298                                 "Failed to setup the bus, will continue\n");
1299                 saa7164_bus_dump(dev);
1300
1301                 /* Ping the running firmware via the command bus and get the
1302                  * firmware version, this checks the bus is running OK.
1303                  */
1304                 version = 0;
1305                 if (saa7164_api_get_fw_version(dev, &version) == SAA_OK)
1306                         dprintk(1, "Bus is operating correctly using version %d.%d.%d.%d (0x%x)\n",
1307                                 (version & 0x0000fc00) >> 10,
1308                                 (version & 0x000003e0) >> 5,
1309                                 (version & 0x0000001f),
1310                                 (version & 0xffff0000) >> 16,
1311                                 version);
1312                 else
1313                         printk(KERN_ERR
1314                                 "Failed to communicate with the firmware\n");
1315
1316                 /* Bring up the I2C buses */
1317                 saa7164_i2c_register(&dev->i2c_bus[0]);
1318                 saa7164_i2c_register(&dev->i2c_bus[1]);
1319                 saa7164_i2c_register(&dev->i2c_bus[2]);
1320                 saa7164_gpio_setup(dev);
1321                 saa7164_card_setup(dev);
1322
1323                 /* Parse the dynamic device configuration, find various
1324                  * media endpoints (MPEG, WMV, PS, TS) and cache their
1325                  * configuration details into the driver, so we can
1326                  * reference them later during simething_register() func,
1327                  * interrupt handlers, deferred work handlers etc.
1328                  */
1329                 saa7164_api_enum_subdevs(dev);
1330
1331                 /* Begin to create the video sub-systems and register funcs */
1332                 if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
1333                         if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) {
1334                                 printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n",
1335                                         __func__);
1336                         }
1337                 }
1338
1339                 if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) {
1340                         if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) {
1341                                 printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n",
1342                                         __func__);
1343                         }
1344                 }
1345
1346                 if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) {
1347                         if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) {
1348                                 printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
1349                                        __func__);
1350                         }
1351                 }
1352
1353                 if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) {
1354                         if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) {
1355                                 printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
1356                                        __func__);
1357                         }
1358                 }
1359
1360                 if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) {
1361                         if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) {
1362                                 printk(KERN_ERR"%s() Failed to register vbi device\n",
1363                                        __func__);
1364                         }
1365                 }
1366
1367                 if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) {
1368                         if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) {
1369                                 printk(KERN_ERR"%s() Failed to register vbi device\n",
1370                                        __func__);
1371                         }
1372                 }
1373                 saa7164_api_set_debug(dev, fw_debug);
1374
1375                 if (fw_debug) {
1376                         dev->kthread = kthread_run(saa7164_thread_function, dev,
1377                                 "saa7164 debug");
1378                         if (IS_ERR(dev->kthread)) {
1379                                 dev->kthread = NULL;
1380                                 printk(KERN_ERR "%s() Failed to create debug kernel thread\n",
1381                                        __func__);
1382                         }
1383                 }
1384
1385         } /* != BOARD_UNKNOWN */
1386         else
1387                 printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n",
1388                        __func__);
1389
1390         dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
1391         dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
1392
1393 fail_fw:
1394         return 0;
1395
1396 fail_irq:
1397         saa7164_dev_unregister(dev);
1398 fail_free:
1399         v4l2_device_unregister(&dev->v4l2_dev);
1400         kfree(dev);
1401         return err;
1402 }
1403
1404 static void saa7164_shutdown(struct saa7164_dev *dev)
1405 {
1406         dprintk(1, "%s()\n", __func__);
1407 }
1408
1409 static void saa7164_finidev(struct pci_dev *pci_dev)
1410 {
1411         struct saa7164_dev *dev = pci_get_drvdata(pci_dev);
1412
1413         if (dev->board != SAA7164_BOARD_UNKNOWN) {
1414                 if (fw_debug && dev->kthread) {
1415                         kthread_stop(dev->kthread);
1416                         dev->kthread = NULL;
1417                 }
1418                 if (dev->firmwareloaded)
1419                         saa7164_api_set_debug(dev, 0x00);
1420         }
1421
1422         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1423                 &dev->ports[SAA7164_PORT_ENC1].irq_interval);
1424         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1425                 &dev->ports[SAA7164_PORT_ENC1].svc_interval);
1426         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1427                 &dev->ports[SAA7164_PORT_ENC1].irq_svc_interval);
1428         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1429                 &dev->ports[SAA7164_PORT_ENC1].read_interval);
1430         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1431                 &dev->ports[SAA7164_PORT_ENC1].poll_interval);
1432         saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI1],
1433                 &dev->ports[SAA7164_PORT_VBI1].read_interval);
1434         saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI2],
1435                 &dev->ports[SAA7164_PORT_VBI2].poll_interval);
1436
1437         saa7164_shutdown(dev);
1438
1439         if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB)
1440                 saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS1]);
1441
1442         if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB)
1443                 saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS2]);
1444
1445         if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER)
1446                 saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC1]);
1447
1448         if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER)
1449                 saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC2]);
1450
1451         if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI)
1452                 saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI1]);
1453
1454         if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI)
1455                 saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI2]);
1456
1457         saa7164_i2c_unregister(&dev->i2c_bus[0]);
1458         saa7164_i2c_unregister(&dev->i2c_bus[1]);
1459         saa7164_i2c_unregister(&dev->i2c_bus[2]);
1460
1461         /* unregister stuff */
1462         free_irq(pci_dev->irq, dev);
1463
1464         if (dev->msi) {
1465                 pci_disable_msi(pci_dev);
1466                 dev->msi = false;
1467         }
1468
1469         pci_disable_device(pci_dev);
1470
1471         mutex_lock(&devlist);
1472         list_del(&dev->devlist);
1473         mutex_unlock(&devlist);
1474
1475         saa7164_dev_unregister(dev);
1476         v4l2_device_unregister(&dev->v4l2_dev);
1477         kfree(dev);
1478 }
1479
1480 static const struct pci_device_id saa7164_pci_tbl[] = {
1481         {
1482                 /* SAA7164 */
1483                 .vendor       = 0x1131,
1484                 .device       = 0x7164,
1485                 .subvendor    = PCI_ANY_ID,
1486                 .subdevice    = PCI_ANY_ID,
1487         }, {
1488                 /* --- end of list --- */
1489         }
1490 };
1491 MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl);
1492
1493 static struct pci_driver saa7164_pci_driver = {
1494         .name     = "saa7164",
1495         .id_table = saa7164_pci_tbl,
1496         .probe    = saa7164_initdev,
1497         .remove   = saa7164_finidev,
1498         /* TODO */
1499         .suspend  = NULL,
1500         .resume   = NULL,
1501 };
1502
1503 static int __init saa7164_init(void)
1504 {
1505         int ret = pci_register_driver(&saa7164_pci_driver);
1506
1507         if (ret)
1508                 return ret;
1509
1510         saa7164_proc_create();
1511
1512         pr_info("saa7164 driver loaded\n");
1513
1514         return 0;
1515 }
1516
1517 static void __exit saa7164_fini(void)
1518 {
1519         saa7164_proc_destroy();
1520         pci_unregister_driver(&saa7164_pci_driver);
1521 }
1522
1523 module_init(saa7164_init);
1524 module_exit(saa7164_fini);
1525