Merge tag '4.16-minor-rc-SMB3-fixes' of git://git.samba.org/sfrench/cifs-2.6
[sfrench/cifs-2.6.git] / drivers / media / pci / pluto2 / pluto2.c
1 /*
2  * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
3  *
4  * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
5  *
6  * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
7  *      by Dany Salman <salmandany@yahoo.fr>
8  *      Copyright (c) 2004 TDF
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  */
21
22 #include <linux/i2c.h>
23 #include <linux/i2c-algo-bit.h>
24 #include <linux/init.h>
25 #include <linux/interrupt.h>
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/pci.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/slab.h>
31
32 #include <media/demux.h>
33 #include <media/dmxdev.h>
34 #include <media/dvb_demux.h>
35 #include <media/dvb_frontend.h>
36 #include <media/dvb_net.h>
37 #include <media/dvbdev.h>
38 #include "tda1004x.h"
39
40 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
41
42 #define DRIVER_NAME             "pluto2"
43
44 #define REG_PIDn(n)             ((n) << 2)      /* PID n pattern registers */
45 #define REG_PCAR                0x0020          /* PC address register */
46 #define REG_TSCR                0x0024          /* TS ctrl & status */
47 #define REG_MISC                0x0028          /* miscellaneous */
48 #define REG_MMAC                0x002c          /* MSB MAC address */
49 #define REG_IMAC                0x0030          /* ISB MAC address */
50 #define REG_LMAC                0x0034          /* LSB MAC address */
51 #define REG_SPID                0x0038          /* SPI data */
52 #define REG_SLCS                0x003c          /* serial links ctrl/status */
53
54 #define PID0_NOFIL              (0x0001 << 16)
55 #define PIDn_ENP                (0x0001 << 15)
56 #define PID0_END                (0x0001 << 14)
57 #define PID0_AFIL               (0x0001 << 13)
58 #define PIDn_PID                (0x1fff <<  0)
59
60 #define TSCR_NBPACKETS          (0x00ff << 24)
61 #define TSCR_DEM                (0x0001 << 17)
62 #define TSCR_DE                 (0x0001 << 16)
63 #define TSCR_RSTN               (0x0001 << 15)
64 #define TSCR_MSKO               (0x0001 << 14)
65 #define TSCR_MSKA               (0x0001 << 13)
66 #define TSCR_MSKL               (0x0001 << 12)
67 #define TSCR_OVR                (0x0001 << 11)
68 #define TSCR_AFUL               (0x0001 << 10)
69 #define TSCR_LOCK               (0x0001 <<  9)
70 #define TSCR_IACK               (0x0001 <<  8)
71 #define TSCR_ADEF               (0x007f <<  0)
72
73 #define MISC_DVR                (0x0fff <<  4)
74 #define MISC_ALED               (0x0001 <<  3)
75 #define MISC_FRST               (0x0001 <<  2)
76 #define MISC_LED1               (0x0001 <<  1)
77 #define MISC_LED0               (0x0001 <<  0)
78
79 #define SPID_SPIDR              (0x00ff <<  0)
80
81 #define SLCS_SCL                (0x0001 <<  7)
82 #define SLCS_SDA                (0x0001 <<  6)
83 #define SLCS_CSN                (0x0001 <<  2)
84 #define SLCS_OVR                (0x0001 <<  1)
85 #define SLCS_SWC                (0x0001 <<  0)
86
87 #define TS_DMA_PACKETS          (8)
88 #define TS_DMA_BYTES            (188 * TS_DMA_PACKETS)
89
90 #define I2C_ADDR_TDA10046       0x10
91 #define I2C_ADDR_TUA6034        0xc2
92 #define NHWFILTERS              8
93
94 struct pluto {
95         /* pci */
96         struct pci_dev *pdev;
97         u8 __iomem *io_mem;
98
99         /* dvb */
100         struct dmx_frontend hw_frontend;
101         struct dmx_frontend mem_frontend;
102         struct dmxdev dmxdev;
103         struct dvb_adapter dvb_adapter;
104         struct dvb_demux demux;
105         struct dvb_frontend *fe;
106         struct dvb_net dvbnet;
107         unsigned int full_ts_users;
108         unsigned int users;
109
110         /* i2c */
111         struct i2c_algo_bit_data i2c_bit;
112         struct i2c_adapter i2c_adap;
113         unsigned int i2cbug;
114
115         /* irq */
116         unsigned int overflow;
117         unsigned int dead;
118
119         /* dma */
120         dma_addr_t dma_addr;
121         u8 dma_buf[TS_DMA_BYTES];
122         u8 dummy[4096];
123 };
124
125 static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
126 {
127         return container_of(feed->demux, struct pluto, demux);
128 }
129
130 static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
131 {
132         return container_of(fe->dvb, struct pluto, dvb_adapter);
133 }
134
135 static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
136 {
137         return readl(&pluto->io_mem[reg]);
138 }
139
140 static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
141 {
142         writel(val, &pluto->io_mem[reg]);
143 }
144
145 static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
146 {
147         u32 val = readl(&pluto->io_mem[reg]);
148         val &= ~mask;
149         val |= bits;
150         writel(val, &pluto->io_mem[reg]);
151 }
152
153 static void pluto_write_tscr(struct pluto *pluto, u32 val)
154 {
155         /* set the number of packets */
156         val &= ~TSCR_ADEF;
157         val |= TS_DMA_PACKETS / 2;
158
159         pluto_writereg(pluto, REG_TSCR, val);
160 }
161
162 static void pluto_setsda(void *data, int state)
163 {
164         struct pluto *pluto = data;
165
166         if (state)
167                 pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
168         else
169                 pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
170 }
171
172 static void pluto_setscl(void *data, int state)
173 {
174         struct pluto *pluto = data;
175
176         if (state)
177                 pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
178         else
179                 pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
180
181         /* try to detect i2c_inb() to workaround hardware bug:
182          * reset SDA to high after SCL has been set to low */
183         if ((state) && (pluto->i2cbug == 0)) {
184                 pluto->i2cbug = 1;
185         } else {
186                 if ((!state) && (pluto->i2cbug == 1))
187                         pluto_setsda(pluto, 1);
188                 pluto->i2cbug = 0;
189         }
190 }
191
192 static int pluto_getsda(void *data)
193 {
194         struct pluto *pluto = data;
195
196         return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
197 }
198
199 static int pluto_getscl(void *data)
200 {
201         struct pluto *pluto = data;
202
203         return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
204 }
205
206 static void pluto_reset_frontend(struct pluto *pluto, int reenable)
207 {
208         u32 val = pluto_readreg(pluto, REG_MISC);
209
210         if (val & MISC_FRST) {
211                 val &= ~MISC_FRST;
212                 pluto_writereg(pluto, REG_MISC, val);
213         }
214         if (reenable) {
215                 val |= MISC_FRST;
216                 pluto_writereg(pluto, REG_MISC, val);
217         }
218 }
219
220 static void pluto_reset_ts(struct pluto *pluto, int reenable)
221 {
222         u32 val = pluto_readreg(pluto, REG_TSCR);
223
224         if (val & TSCR_RSTN) {
225                 val &= ~TSCR_RSTN;
226                 pluto_write_tscr(pluto, val);
227         }
228         if (reenable) {
229                 val |= TSCR_RSTN;
230                 pluto_write_tscr(pluto, val);
231         }
232 }
233
234 static void pluto_set_dma_addr(struct pluto *pluto)
235 {
236         pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
237 }
238
239 static int pluto_dma_map(struct pluto *pluto)
240 {
241         pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
242                         TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
243
244         return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
245 }
246
247 static void pluto_dma_unmap(struct pluto *pluto)
248 {
249         pci_unmap_single(pluto->pdev, pluto->dma_addr,
250                         TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
251 }
252
253 static int pluto_start_feed(struct dvb_demux_feed *f)
254 {
255         struct pluto *pluto = feed_to_pluto(f);
256
257         /* enable PID filtering */
258         if (pluto->users++ == 0)
259                 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
260
261         if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
262                 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
263         else if (pluto->full_ts_users++ == 0)
264                 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
265
266         return 0;
267 }
268
269 static int pluto_stop_feed(struct dvb_demux_feed *f)
270 {
271         struct pluto *pluto = feed_to_pluto(f);
272
273         /* disable PID filtering */
274         if (--pluto->users == 0)
275                 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
276
277         if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
278                 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
279         else if (--pluto->full_ts_users == 0)
280                 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
281
282         return 0;
283 }
284
285 static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
286 {
287         /* synchronize the DMA transfer with the CPU
288          * first so that we see updated contents. */
289         pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
290                         TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
291
292         /* Workaround for broken hardware:
293          * [1] On startup NBPACKETS seems to contain an uninitialized value,
294          *     but no packets have been transferred.
295          * [2] Sometimes (actually very often) NBPACKETS stays at zero
296          *     although one packet has been transferred.
297          * [3] Sometimes (actually rarely), the card gets into an erroneous
298          *     mode where it continuously generates interrupts, claiming it
299          *     has received nbpackets>TS_DMA_PACKETS packets, but no packet
300          *     has been transferred. Only a reset seems to solve this
301          */
302         if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
303                 unsigned int i = 0;
304                 while (pluto->dma_buf[i] == 0x47)
305                         i += 188;
306                 nbpackets = i / 188;
307                 if (i == 0) {
308                         pluto_reset_ts(pluto, 1);
309                         dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
310                 }
311         }
312
313         dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
314
315         /* clear the dma buffer. this is needed to be able to identify
316          * new valid ts packets above */
317         memset(pluto->dma_buf, 0, nbpackets * 188);
318
319         /* reset the dma address */
320         pluto_set_dma_addr(pluto);
321
322         /* sync the buffer and give it back to the card */
323         pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
324                         TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
325 }
326
327 static irqreturn_t pluto_irq(int irq, void *dev_id)
328 {
329         struct pluto *pluto = dev_id;
330         u32 tscr;
331
332         /* check whether an interrupt occurred on this device */
333         tscr = pluto_readreg(pluto, REG_TSCR);
334         if (!(tscr & (TSCR_DE | TSCR_OVR)))
335                 return IRQ_NONE;
336
337         if (tscr == 0xffffffff) {
338                 if (pluto->dead == 0)
339                         dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
340                 /* It's dead Jim */
341                 pluto->dead = 1;
342                 return IRQ_HANDLED;
343         }
344
345         /* dma end interrupt */
346         if (tscr & TSCR_DE) {
347                 pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
348                 /* overflow interrupt */
349                 if (tscr & TSCR_OVR)
350                         pluto->overflow++;
351                 if (pluto->overflow) {
352                         dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
353                                         pluto->overflow);
354                         pluto_reset_ts(pluto, 1);
355                         pluto->overflow = 0;
356                 }
357         } else if (tscr & TSCR_OVR) {
358                 pluto->overflow++;
359         }
360
361         /* ACK the interrupt */
362         pluto_write_tscr(pluto, tscr | TSCR_IACK);
363
364         return IRQ_HANDLED;
365 }
366
367 static void pluto_enable_irqs(struct pluto *pluto)
368 {
369         u32 val = pluto_readreg(pluto, REG_TSCR);
370
371         /* disable AFUL and LOCK interrupts */
372         val |= (TSCR_MSKA | TSCR_MSKL);
373         /* enable DMA and OVERFLOW interrupts */
374         val &= ~(TSCR_DEM | TSCR_MSKO);
375         /* clear pending interrupts */
376         val |= TSCR_IACK;
377
378         pluto_write_tscr(pluto, val);
379 }
380
381 static void pluto_disable_irqs(struct pluto *pluto)
382 {
383         u32 val = pluto_readreg(pluto, REG_TSCR);
384
385         /* disable all interrupts */
386         val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
387         /* clear pending interrupts */
388         val |= TSCR_IACK;
389
390         pluto_write_tscr(pluto, val);
391 }
392
393 static int pluto_hw_init(struct pluto *pluto)
394 {
395         pluto_reset_frontend(pluto, 1);
396
397         /* set automatic LED control by FPGA */
398         pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
399
400         /* set data endianness */
401 #ifdef __LITTLE_ENDIAN
402         pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
403 #else
404         pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
405 #endif
406         /* map DMA and set address */
407         pluto_dma_map(pluto);
408         pluto_set_dma_addr(pluto);
409
410         /* enable interrupts */
411         pluto_enable_irqs(pluto);
412
413         /* reset TS logic */
414         pluto_reset_ts(pluto, 1);
415
416         return 0;
417 }
418
419 static void pluto_hw_exit(struct pluto *pluto)
420 {
421         /* disable interrupts */
422         pluto_disable_irqs(pluto);
423
424         pluto_reset_ts(pluto, 0);
425
426         /* LED: disable automatic control, enable yellow, disable green */
427         pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
428
429         /* unmap DMA */
430         pluto_dma_unmap(pluto);
431
432         pluto_reset_frontend(pluto, 0);
433 }
434
435 static inline u32 divide(u32 numerator, u32 denominator)
436 {
437         if (denominator == 0)
438                 return ~0;
439
440         return DIV_ROUND_CLOSEST(numerator, denominator);
441 }
442
443 /* LG Innotek TDTE-E001P (Infineon TUA6034) */
444 static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
445 {
446         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
447         struct pluto *pluto = frontend_to_pluto(fe);
448         struct i2c_msg msg;
449         int ret;
450         u8 buf[4];
451         u32 div;
452
453         // Fref = 166.667 Hz
454         // Fref * 3 = 500.000 Hz
455         // IF = 36166667
456         // IF / Fref = 217
457         //div = divide(p->frequency + 36166667, 166667);
458         div = divide(p->frequency * 3, 500000) + 217;
459         buf[0] = (div >> 8) & 0x7f;
460         buf[1] = (div >> 0) & 0xff;
461
462         if (p->frequency < 611000000)
463                 buf[2] = 0xb4;
464         else if (p->frequency < 811000000)
465                 buf[2] = 0xbc;
466         else
467                 buf[2] = 0xf4;
468
469         // VHF: 174-230 MHz
470         // center: 350 MHz
471         // UHF: 470-862 MHz
472         if (p->frequency < 350000000)
473                 buf[3] = 0x02;
474         else
475                 buf[3] = 0x04;
476
477         if (p->bandwidth_hz == 8000000)
478                 buf[3] |= 0x08;
479
480         msg.addr = I2C_ADDR_TUA6034 >> 1;
481         msg.flags = 0;
482         msg.buf = buf;
483         msg.len = sizeof(buf);
484
485         if (fe->ops.i2c_gate_ctrl)
486                 fe->ops.i2c_gate_ctrl(fe, 1);
487         ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
488         if (ret < 0)
489                 return ret;
490         else if (ret == 0)
491                 return -EREMOTEIO;
492
493         return 0;
494 }
495
496 static int pluto2_request_firmware(struct dvb_frontend *fe,
497                                    const struct firmware **fw, char *name)
498 {
499         struct pluto *pluto = frontend_to_pluto(fe);
500
501         return request_firmware(fw, name, &pluto->pdev->dev);
502 }
503
504 static struct tda1004x_config pluto2_fe_config = {
505         .demod_address = I2C_ADDR_TDA10046 >> 1,
506         .invert = 1,
507         .invert_oclk = 0,
508         .xtal_freq = TDA10046_XTAL_16M,
509         .agc_config = TDA10046_AGC_DEFAULT,
510         .if_freq = TDA10046_FREQ_3617,
511         .request_firmware = pluto2_request_firmware,
512 };
513
514 static int frontend_init(struct pluto *pluto)
515 {
516         int ret;
517
518         pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
519         if (!pluto->fe) {
520                 dev_err(&pluto->pdev->dev, "could not attach frontend\n");
521                 return -ENODEV;
522         }
523         pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
524
525         ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
526         if (ret < 0) {
527                 if (pluto->fe->ops.release)
528                         pluto->fe->ops.release(pluto->fe);
529                 return ret;
530         }
531
532         return 0;
533 }
534
535 static void pluto_read_rev(struct pluto *pluto)
536 {
537         u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
538         dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
539                         (val >> 12) & 0x0f, (val >> 4) & 0xff);
540 }
541
542 static void pluto_read_mac(struct pluto *pluto, u8 *mac)
543 {
544         u32 val = pluto_readreg(pluto, REG_MMAC);
545         mac[0] = (val >> 8) & 0xff;
546         mac[1] = (val >> 0) & 0xff;
547
548         val = pluto_readreg(pluto, REG_IMAC);
549         mac[2] = (val >> 8) & 0xff;
550         mac[3] = (val >> 0) & 0xff;
551
552         val = pluto_readreg(pluto, REG_LMAC);
553         mac[4] = (val >> 8) & 0xff;
554         mac[5] = (val >> 0) & 0xff;
555
556         dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
557 }
558
559 static int pluto_read_serial(struct pluto *pluto)
560 {
561         struct pci_dev *pdev = pluto->pdev;
562         unsigned int i, j;
563         u8 __iomem *cis;
564
565         cis = pci_iomap(pdev, 1, 0);
566         if (!cis)
567                 return -EIO;
568
569         dev_info(&pdev->dev, "S/N ");
570
571         for (i = 0xe0; i < 0x100; i += 4) {
572                 u32 val = readl(&cis[i]);
573                 for (j = 0; j < 32; j += 8) {
574                         if ((val & 0xff) == 0xff)
575                                 goto out;
576                         printk(KERN_CONT "%c", val & 0xff);
577                         val >>= 8;
578                 }
579         }
580 out:
581         printk(KERN_CONT "\n");
582         pci_iounmap(pdev, cis);
583
584         return 0;
585 }
586
587 static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
588 {
589         struct pluto *pluto;
590         struct dvb_adapter *dvb_adapter;
591         struct dvb_demux *dvbdemux;
592         struct dmx_demux *dmx;
593         int ret = -ENOMEM;
594
595         pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
596         if (!pluto)
597                 goto out;
598
599         pluto->pdev = pdev;
600
601         ret = pci_enable_device(pdev);
602         if (ret < 0)
603                 goto err_kfree;
604
605         /* enable interrupts */
606         pci_write_config_dword(pdev, 0x6c, 0x8000);
607
608         ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
609         if (ret < 0)
610                 goto err_pci_disable_device;
611
612         pci_set_master(pdev);
613
614         ret = pci_request_regions(pdev, DRIVER_NAME);
615         if (ret < 0)
616                 goto err_pci_disable_device;
617
618         pluto->io_mem = pci_iomap(pdev, 0, 0x40);
619         if (!pluto->io_mem) {
620                 ret = -EIO;
621                 goto err_pci_release_regions;
622         }
623
624         pci_set_drvdata(pdev, pluto);
625
626         ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
627         if (ret < 0)
628                 goto err_pci_iounmap;
629
630         ret = pluto_hw_init(pluto);
631         if (ret < 0)
632                 goto err_free_irq;
633
634         /* i2c */
635         i2c_set_adapdata(&pluto->i2c_adap, pluto);
636         strcpy(pluto->i2c_adap.name, DRIVER_NAME);
637         pluto->i2c_adap.owner = THIS_MODULE;
638         pluto->i2c_adap.dev.parent = &pdev->dev;
639         pluto->i2c_adap.algo_data = &pluto->i2c_bit;
640         pluto->i2c_bit.data = pluto;
641         pluto->i2c_bit.setsda = pluto_setsda;
642         pluto->i2c_bit.setscl = pluto_setscl;
643         pluto->i2c_bit.getsda = pluto_getsda;
644         pluto->i2c_bit.getscl = pluto_getscl;
645         pluto->i2c_bit.udelay = 10;
646         pluto->i2c_bit.timeout = 10;
647
648         /* Raise SCL and SDA */
649         pluto_setsda(pluto, 1);
650         pluto_setscl(pluto, 1);
651
652         ret = i2c_bit_add_bus(&pluto->i2c_adap);
653         if (ret < 0)
654                 goto err_pluto_hw_exit;
655
656         /* dvb */
657         ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
658                                    THIS_MODULE, &pdev->dev, adapter_nr);
659         if (ret < 0)
660                 goto err_i2c_del_adapter;
661
662         dvb_adapter = &pluto->dvb_adapter;
663
664         pluto_read_rev(pluto);
665         pluto_read_serial(pluto);
666         pluto_read_mac(pluto, dvb_adapter->proposed_mac);
667
668         dvbdemux = &pluto->demux;
669         dvbdemux->filternum = 256;
670         dvbdemux->feednum = 256;
671         dvbdemux->start_feed = pluto_start_feed;
672         dvbdemux->stop_feed = pluto_stop_feed;
673         dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
674                         DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
675         ret = dvb_dmx_init(dvbdemux);
676         if (ret < 0)
677                 goto err_dvb_unregister_adapter;
678
679         dmx = &dvbdemux->dmx;
680
681         pluto->hw_frontend.source = DMX_FRONTEND_0;
682         pluto->mem_frontend.source = DMX_MEMORY_FE;
683         pluto->dmxdev.filternum = NHWFILTERS;
684         pluto->dmxdev.demux = dmx;
685
686         ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
687         if (ret < 0)
688                 goto err_dvb_dmx_release;
689
690         ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
691         if (ret < 0)
692                 goto err_dvb_dmxdev_release;
693
694         ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
695         if (ret < 0)
696                 goto err_remove_hw_frontend;
697
698         ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
699         if (ret < 0)
700                 goto err_remove_mem_frontend;
701
702         ret = frontend_init(pluto);
703         if (ret < 0)
704                 goto err_disconnect_frontend;
705
706         dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
707 out:
708         return ret;
709
710 err_disconnect_frontend:
711         dmx->disconnect_frontend(dmx);
712 err_remove_mem_frontend:
713         dmx->remove_frontend(dmx, &pluto->mem_frontend);
714 err_remove_hw_frontend:
715         dmx->remove_frontend(dmx, &pluto->hw_frontend);
716 err_dvb_dmxdev_release:
717         dvb_dmxdev_release(&pluto->dmxdev);
718 err_dvb_dmx_release:
719         dvb_dmx_release(dvbdemux);
720 err_dvb_unregister_adapter:
721         dvb_unregister_adapter(dvb_adapter);
722 err_i2c_del_adapter:
723         i2c_del_adapter(&pluto->i2c_adap);
724 err_pluto_hw_exit:
725         pluto_hw_exit(pluto);
726 err_free_irq:
727         free_irq(pdev->irq, pluto);
728 err_pci_iounmap:
729         pci_iounmap(pdev, pluto->io_mem);
730 err_pci_release_regions:
731         pci_release_regions(pdev);
732 err_pci_disable_device:
733         pci_disable_device(pdev);
734 err_kfree:
735         kfree(pluto);
736         goto out;
737 }
738
739 static void pluto2_remove(struct pci_dev *pdev)
740 {
741         struct pluto *pluto = pci_get_drvdata(pdev);
742         struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
743         struct dvb_demux *dvbdemux = &pluto->demux;
744         struct dmx_demux *dmx = &dvbdemux->dmx;
745
746         dmx->close(dmx);
747         dvb_net_release(&pluto->dvbnet);
748         if (pluto->fe)
749                 dvb_unregister_frontend(pluto->fe);
750
751         dmx->disconnect_frontend(dmx);
752         dmx->remove_frontend(dmx, &pluto->mem_frontend);
753         dmx->remove_frontend(dmx, &pluto->hw_frontend);
754         dvb_dmxdev_release(&pluto->dmxdev);
755         dvb_dmx_release(dvbdemux);
756         dvb_unregister_adapter(dvb_adapter);
757         i2c_del_adapter(&pluto->i2c_adap);
758         pluto_hw_exit(pluto);
759         free_irq(pdev->irq, pluto);
760         pci_iounmap(pdev, pluto->io_mem);
761         pci_release_regions(pdev);
762         pci_disable_device(pdev);
763         kfree(pluto);
764 }
765
766 #ifndef PCI_VENDOR_ID_SCM
767 #define PCI_VENDOR_ID_SCM       0x0432
768 #endif
769 #ifndef PCI_DEVICE_ID_PLUTO2
770 #define PCI_DEVICE_ID_PLUTO2    0x0001
771 #endif
772
773 static const struct pci_device_id pluto2_id_table[] = {
774         {
775                 .vendor = PCI_VENDOR_ID_SCM,
776                 .device = PCI_DEVICE_ID_PLUTO2,
777                 .subvendor = PCI_ANY_ID,
778                 .subdevice = PCI_ANY_ID,
779         }, {
780                 /* empty */
781         },
782 };
783
784 MODULE_DEVICE_TABLE(pci, pluto2_id_table);
785
786 static struct pci_driver pluto2_driver = {
787         .name = DRIVER_NAME,
788         .id_table = pluto2_id_table,
789         .probe = pluto2_probe,
790         .remove = pluto2_remove,
791 };
792
793 module_pci_driver(pluto2_driver);
794
795 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
796 MODULE_DESCRIPTION("Pluto2 driver");
797 MODULE_LICENSE("GPL");