treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
[sfrench/cifs-2.6.git] / drivers / media / pci / cx18 / cx18-cards.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  cx18 functions to query card hardware
4  *
5  *  Derived from ivtv-cards.c
6  *
7  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
8  *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
9  */
10
11 #include "cx18-driver.h"
12 #include "cx18-cards.h"
13 #include "cx18-av-core.h"
14 #include "cx18-i2c.h"
15 #include <media/i2c/cs5345.h>
16
17 #define V4L2_STD_PAL_SECAM (V4L2_STD_PAL|V4L2_STD_SECAM)
18
19 /********************** card configuration *******************************/
20
21 /* usual i2c tuner addresses to probe */
22 static struct cx18_card_tuner_i2c cx18_i2c_std = {
23         .radio = { I2C_CLIENT_END },
24         .demod = { 0x43, I2C_CLIENT_END },
25         .tv    = { 0x61, 0x60, I2C_CLIENT_END },
26 };
27
28 /*
29  * usual i2c tuner addresses to probe with additional demod address for
30  * an NXP TDA8295 at 0x42 (N.B. it can possibly be at 0x4b or 0x4c too).
31  */
32 static struct cx18_card_tuner_i2c cx18_i2c_nxp = {
33         .radio = { I2C_CLIENT_END },
34         .demod = { 0x42, 0x43, I2C_CLIENT_END },
35         .tv    = { 0x61, 0x60, I2C_CLIENT_END },
36 };
37
38 /* Please add new PCI IDs to: http://pci-ids.ucw.cz/
39    This keeps the PCI ID database up to date. Note that the entries
40    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
41    New vendor IDs should still be added to the vendor ID list. */
42
43 /* Hauppauge HVR-1600 cards */
44
45 /* Note: for Hauppauge cards the tveeprom information is used instead
46    of PCI IDs */
47 static const struct cx18_card cx18_card_hvr1600_esmt = {
48         .type = CX18_CARD_HVR_1600_ESMT,
49         .name = "Hauppauge HVR-1600",
50         .comment = "Simultaneous Digital and Analog TV capture supported\n",
51         .v4l2_capabilities = CX18_CAP_ENCODER,
52         .hw_audio_ctrl = CX18_HW_418_AV,
53         .hw_muxer = CX18_HW_CS5345,
54         .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
55                   CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
56                   CX18_HW_Z8F0811_IR_HAUP,
57         .video_inputs = {
58                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
59                 { CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
60                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
61                 { CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
62                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
63         },
64         .audio_inputs = {
65                 { CX18_CARD_INPUT_AUD_TUNER,
66                   CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
67                 { CX18_CARD_INPUT_LINE_IN1,
68                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
69                 { CX18_CARD_INPUT_LINE_IN2,
70                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
71         },
72         .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
73                          CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
74         .ddr = {
75                 /* ESMT M13S128324A-5B memory */
76                 .chip_config = 0x003,
77                 .refresh = 0x30c,
78                 .timing1 = 0x44220e82,
79                 .timing2 = 0x08,
80                 .tune_lane = 0,
81                 .initial_emrs = 0,
82         },
83         .gpio_init.initial_value = 0x3001,
84         .gpio_init.direction = 0x3001,
85         .gpio_i2c_slave_reset = {
86                 .active_lo_mask = 0x3001,
87                 .msecs_asserted = 10,
88                 .msecs_recovery = 40,
89                 .ir_reset_mask  = 0x0001,
90         },
91         .i2c = &cx18_i2c_std,
92 };
93
94 static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
95         .type = CX18_CARD_HVR_1600_S5H1411,
96         .name = "Hauppauge HVR-1600",
97         .comment = "Simultaneous Digital and Analog TV capture supported\n",
98         .v4l2_capabilities = CX18_CAP_ENCODER,
99         .hw_audio_ctrl = CX18_HW_418_AV,
100         .hw_muxer = CX18_HW_CS5345,
101         .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
102                   CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
103                   CX18_HW_Z8F0811_IR_HAUP,
104         .video_inputs = {
105                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
106                 { CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
107                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
108                 { CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
109                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
110         },
111         .audio_inputs = {
112                 { CX18_CARD_INPUT_AUD_TUNER,
113                   CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
114                 { CX18_CARD_INPUT_LINE_IN1,
115                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
116                 { CX18_CARD_INPUT_LINE_IN2,
117                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
118         },
119         .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
120                          CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
121         .ddr = {
122                 /* ESMT M13S128324A-5B memory */
123                 .chip_config = 0x003,
124                 .refresh = 0x30c,
125                 .timing1 = 0x44220e82,
126                 .timing2 = 0x08,
127                 .tune_lane = 0,
128                 .initial_emrs = 0,
129         },
130         .gpio_init.initial_value = 0x3801,
131         .gpio_init.direction = 0x3801,
132         .gpio_i2c_slave_reset = {
133                 .active_lo_mask = 0x3801,
134                 .msecs_asserted = 10,
135                 .msecs_recovery = 40,
136                 .ir_reset_mask  = 0x0001,
137         },
138         .i2c = &cx18_i2c_nxp,
139 };
140
141 static const struct cx18_card cx18_card_hvr1600_samsung = {
142         .type = CX18_CARD_HVR_1600_SAMSUNG,
143         .name = "Hauppauge HVR-1600 (Preproduction)",
144         .comment = "Simultaneous Digital and Analog TV capture supported\n",
145         .v4l2_capabilities = CX18_CAP_ENCODER,
146         .hw_audio_ctrl = CX18_HW_418_AV,
147         .hw_muxer = CX18_HW_CS5345,
148         .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
149                   CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
150                   CX18_HW_Z8F0811_IR_HAUP,
151         .video_inputs = {
152                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
153                 { CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
154                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
155                 { CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
156                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
157         },
158         .audio_inputs = {
159                 { CX18_CARD_INPUT_AUD_TUNER,
160                   CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
161                 { CX18_CARD_INPUT_LINE_IN1,
162                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
163                 { CX18_CARD_INPUT_LINE_IN2,
164                   CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
165         },
166         .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
167                          CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
168         .ddr = {
169                 /* Samsung K4D263238G-VC33 memory */
170                 .chip_config = 0x003,
171                 .refresh = 0x30c,
172                 .timing1 = 0x23230b73,
173                 .timing2 = 0x08,
174                 .tune_lane = 0,
175                 .initial_emrs = 2,
176         },
177         .gpio_init.initial_value = 0x3001,
178         .gpio_init.direction = 0x3001,
179         .gpio_i2c_slave_reset = {
180                 .active_lo_mask = 0x3001,
181                 .msecs_asserted = 10,
182                 .msecs_recovery = 40,
183                 .ir_reset_mask  = 0x0001,
184         },
185         .i2c = &cx18_i2c_std,
186 };
187
188 /* ------------------------------------------------------------------------- */
189
190 /* Compro VideoMate H900: note that this card is analog only! */
191
192 static const struct cx18_card_pci_info cx18_pci_h900[] = {
193         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
194         { 0, 0, 0 }
195 };
196
197 static const struct cx18_card cx18_card_h900 = {
198         .type = CX18_CARD_COMPRO_H900,
199         .name = "Compro VideoMate H900",
200         .comment = "Analog TV capture supported\n",
201         .v4l2_capabilities = CX18_CAP_ENCODER,
202         .hw_audio_ctrl = CX18_HW_418_AV,
203         .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
204         .video_inputs = {
205                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
206                 { CX18_CARD_INPUT_SVIDEO1,    1,
207                         CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
208                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
209         },
210         .audio_inputs = {
211                 { CX18_CARD_INPUT_AUD_TUNER,
212                   CX18_AV_AUDIO5, 0 },
213                 { CX18_CARD_INPUT_LINE_IN1,
214                   CX18_AV_AUDIO_SERIAL1, 0 },
215         },
216         .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
217                          CX18_AV_AUDIO_SERIAL1, 0 },
218         .tuners = {
219                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
220         },
221         .ddr = {
222                 /* EtronTech EM6A9160TS-5G memory */
223                 .chip_config = 0x50003,
224                 .refresh = 0x753,
225                 .timing1 = 0x24330e84,
226                 .timing2 = 0x1f,
227                 .tune_lane = 0,
228                 .initial_emrs = 0,
229         },
230         .xceive_pin = 15,
231         .pci_list = cx18_pci_h900,
232         .i2c = &cx18_i2c_std,
233 };
234
235 /* ------------------------------------------------------------------------- */
236
237 /* Yuan MPC718: not working at the moment! */
238
239 static const struct cx18_card_pci_info cx18_pci_mpc718[] = {
240         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_YUAN, 0x0718 },
241         { 0, 0, 0 }
242 };
243
244 static const struct cx18_card cx18_card_mpc718 = {
245         .type = CX18_CARD_YUAN_MPC718,
246         .name = "Yuan MPC718 MiniPCI DVB-T/Analog",
247         .comment = "Experimenters needed for device to work well.\n"
248                   "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
249         .v4l2_capabilities = CX18_CAP_ENCODER,
250         .hw_audio_ctrl = CX18_HW_418_AV,
251         .hw_muxer = CX18_HW_GPIO_MUX,
252         .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
253                   CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
254         .video_inputs = {
255                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
256                 { CX18_CARD_INPUT_SVIDEO1,    1,
257                                 CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
258                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
259                 { CX18_CARD_INPUT_SVIDEO2,    2,
260                                 CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
261                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
262         },
263         .audio_inputs = {
264                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
265                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
266                 { CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
267         },
268         .tuners = {
269                 /* XC3028 tuner */
270                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
271         },
272         /* FIXME - the FM radio is just a guess and driver doesn't use SIF */
273         .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
274         .ddr = {
275                 /* Hynix HY5DU283222B DDR RAM */
276                 .chip_config = 0x303,
277                 .refresh = 0x3bd,
278                 .timing1 = 0x36320966,
279                 .timing2 = 0x1f,
280                 .tune_lane = 0,
281                 .initial_emrs = 2,
282         },
283         .gpio_init.initial_value = 0x1,
284         .gpio_init.direction = 0x3,
285         /* FIXME - these GPIO's are just guesses */
286         .gpio_audio_input = { .mask   = 0x3,
287                               .tuner  = 0x1,
288                               .linein = 0x3,
289                               .radio  = 0x1 },
290         .xceive_pin = 0,
291         .pci_list = cx18_pci_mpc718,
292         .i2c = &cx18_i2c_std,
293 };
294
295 /* ------------------------------------------------------------------------- */
296
297 /* GoTView PCI */
298
299 static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
300         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
301         { 0, 0, 0 }
302 };
303
304 static const struct cx18_card cx18_card_gotview_dvd3 = {
305         .type = CX18_CARD_GOTVIEW_PCI_DVD3,
306         .name = "GoTView PCI DVD3 Hybrid",
307         .comment = "Experimenters needed for device to work well.\n"
308                   "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
309         .v4l2_capabilities = CX18_CAP_ENCODER,
310         .hw_audio_ctrl = CX18_HW_418_AV,
311         .hw_muxer = CX18_HW_GPIO_MUX,
312         .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
313                   CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
314         .video_inputs = {
315                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
316                 { CX18_CARD_INPUT_SVIDEO1,    1,
317                                 CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
318                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
319                 { CX18_CARD_INPUT_SVIDEO2,    2,
320                                 CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
321                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
322         },
323         .audio_inputs = {
324                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
325                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
326                 { CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
327         },
328         .tuners = {
329                 /* XC3028 tuner */
330                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
331         },
332         /* FIXME - the FM radio is just a guess and driver doesn't use SIF */
333         .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
334         .ddr = {
335                 /* Hynix HY5DU283222B DDR RAM */
336                 .chip_config = 0x303,
337                 .refresh = 0x3bd,
338                 .timing1 = 0x36320966,
339                 .timing2 = 0x1f,
340                 .tune_lane = 0,
341                 .initial_emrs = 2,
342         },
343         .gpio_init.initial_value = 0x1,
344         .gpio_init.direction = 0x3,
345
346         .gpio_audio_input = { .mask   = 0x3,
347                               .tuner  = 0x1,
348                               .linein = 0x2,
349                               .radio  = 0x1 },
350         .xceive_pin = 0,
351         .pci_list = cx18_pci_gotview_dvd3,
352         .i2c = &cx18_i2c_std,
353 };
354
355 /* ------------------------------------------------------------------------- */
356
357 /* Conexant Raptor PAL/SECAM: note that this card is analog only! */
358
359 static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
360         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_CONEXANT, 0x0009 },
361         { 0, 0, 0 }
362 };
363
364 static const struct cx18_card cx18_card_cnxt_raptor_pal = {
365         .type = CX18_CARD_CNXT_RAPTOR_PAL,
366         .name = "Conexant Raptor PAL/SECAM",
367         .comment = "Analog TV capture supported\n",
368         .v4l2_capabilities = CX18_CAP_ENCODER,
369         .hw_audio_ctrl = CX18_HW_418_AV,
370         .hw_muxer = CX18_HW_GPIO_MUX,
371         .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX,
372         .video_inputs = {
373                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
374                 { CX18_CARD_INPUT_SVIDEO1,    1,
375                         CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
376                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
377                 { CX18_CARD_INPUT_SVIDEO2,    2,
378                         CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
379                 { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
380         },
381         .audio_inputs = {
382                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
383                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
384                 { CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
385         },
386         .tuners = {
387                 { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 },
388         },
389         .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 2 },
390         .ddr = {
391                 /* MT 46V16M16 memory */
392                 .chip_config = 0x50306,
393                 .refresh = 0x753,
394                 .timing1 = 0x33220953,
395                 .timing2 = 0x09,
396                 .tune_lane = 0,
397                 .initial_emrs = 0,
398         },
399         .gpio_init.initial_value = 0x1002,
400         .gpio_init.direction = 0xf002,
401         .gpio_audio_input = { .mask   = 0xf002,
402                               .tuner  = 0x1002,   /* LED D1  Tuner AF  */
403                               .linein = 0x2000,   /* LED D2  Line In 1 */
404                               .radio  = 0x4002 }, /* LED D3  Tuner AF  */
405         .pci_list = cx18_pci_cnxt_raptor_pal,
406         .i2c = &cx18_i2c_std,
407 };
408
409 /* ------------------------------------------------------------------------- */
410
411 /* Toshiba Qosmio laptop internal DVB-T/Analog Hybrid Tuner */
412
413 static const struct cx18_card_pci_info cx18_pci_toshiba_qosmio_dvbt[] = {
414         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_TOSHIBA, 0x0110 },
415         { 0, 0, 0 }
416 };
417
418 static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
419         .type = CX18_CARD_TOSHIBA_QOSMIO_DVBT,
420         .name = "Toshiba Qosmio DVB-T/Analog",
421         .comment = "Experimenters and photos needed for device to work well.\n"
422                   "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
423         .v4l2_capabilities = CX18_CAP_ENCODER,
424         .hw_audio_ctrl = CX18_HW_418_AV,
425         .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
426         .video_inputs = {
427                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE6 },
428                 { CX18_CARD_INPUT_SVIDEO1,    1,
429                         CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
430                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
431         },
432         .audio_inputs = {
433                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
434                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
435         },
436         .tuners = {
437                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
438         },
439         .ddr = {
440                 .chip_config = 0x202,
441                 .refresh = 0x3bb,
442                 .timing1 = 0x33320a63,
443                 .timing2 = 0x0a,
444                 .tune_lane = 0,
445                 .initial_emrs = 0x42,
446         },
447         .xceive_pin = 15,
448         .pci_list = cx18_pci_toshiba_qosmio_dvbt,
449         .i2c = &cx18_i2c_std,
450 };
451
452 /* ------------------------------------------------------------------------- */
453
454 /* Leadtek WinFast PVR2100 */
455
456 static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = {
457         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100   */
458         { 0, 0, 0 }
459 };
460
461 static const struct cx18_card cx18_card_leadtek_pvr2100 = {
462         .type = CX18_CARD_LEADTEK_PVR2100,
463         .name = "Leadtek WinFast PVR2100",
464         .comment = "Experimenters and photos needed for device to work well.\n"
465                   "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
466         .v4l2_capabilities = CX18_CAP_ENCODER,
467         .hw_audio_ctrl = CX18_HW_418_AV,
468         .hw_muxer = CX18_HW_GPIO_MUX,
469         .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
470                   CX18_HW_GPIO_RESET_CTRL,
471         .video_inputs = {
472                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
473                 { CX18_CARD_INPUT_SVIDEO1,    1,
474                         CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
475                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
476                 { CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
477         },
478         .audio_inputs = {
479                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
480                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
481         },
482         .tuners = {
483                 /* XC2028 tuner */
484                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
485         },
486         .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
487         .ddr = {
488                 /* Pointer to proper DDR config values provided by Terry Wu */
489                 .chip_config = 0x303,
490                 .refresh = 0x3bb,
491                 .timing1 = 0x24220e83,
492                 .timing2 = 0x1f,
493                 .tune_lane = 0,
494                 .initial_emrs = 0x2,
495         },
496         .gpio_init.initial_value = 0x6,
497         .gpio_init.direction = 0x7,
498         .gpio_audio_input = { .mask   = 0x7,
499                               .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
500         .xceive_pin = 1,
501         .pci_list = cx18_pci_leadtek_pvr2100,
502         .i2c = &cx18_i2c_std,
503 };
504
505 /* ------------------------------------------------------------------------- */
506
507 /* Leadtek WinFast DVR3100 H */
508
509 static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
510         { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
511         { 0, 0, 0 }
512 };
513
514 static const struct cx18_card cx18_card_leadtek_dvr3100h = {
515         .type = CX18_CARD_LEADTEK_DVR3100H,
516         .name = "Leadtek WinFast DVR3100 H",
517         .comment = "Simultaneous DVB-T and Analog capture supported,\n"
518                   "\texcept when capturing Analog from the antenna input.\n",
519         .v4l2_capabilities = CX18_CAP_ENCODER,
520         .hw_audio_ctrl = CX18_HW_418_AV,
521         .hw_muxer = CX18_HW_GPIO_MUX,
522         .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
523                   CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
524         .video_inputs = {
525                 { CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
526                 { CX18_CARD_INPUT_SVIDEO1,    1,
527                         CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
528                 { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
529                 { CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
530         },
531         .audio_inputs = {
532                 { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
533                 { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
534         },
535         .tuners = {
536                 /* XC3028 tuner */
537                 { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
538         },
539         .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
540         .ddr = {
541                 /* Pointer to proper DDR config values provided by Terry Wu */
542                 .chip_config = 0x303,
543                 .refresh = 0x3bb,
544                 .timing1 = 0x24220e83,
545                 .timing2 = 0x1f,
546                 .tune_lane = 0,
547                 .initial_emrs = 0x2,
548         },
549         .gpio_init.initial_value = 0x6,
550         .gpio_init.direction = 0x7,
551         .gpio_audio_input = { .mask   = 0x7,
552                               .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
553         .xceive_pin = 1,
554         .pci_list = cx18_pci_leadtek_dvr3100h,
555         .i2c = &cx18_i2c_std,
556 };
557
558 /* ------------------------------------------------------------------------- */
559
560 static const struct cx18_card *cx18_card_list[] = {
561         &cx18_card_hvr1600_esmt,
562         &cx18_card_hvr1600_samsung,
563         &cx18_card_h900,
564         &cx18_card_mpc718,
565         &cx18_card_cnxt_raptor_pal,
566         &cx18_card_toshiba_qosmio_dvbt,
567         &cx18_card_leadtek_pvr2100,
568         &cx18_card_leadtek_dvr3100h,
569         &cx18_card_gotview_dvd3,
570         &cx18_card_hvr1600_s5h1411
571 };
572
573 const struct cx18_card *cx18_get_card(u16 index)
574 {
575         if (index >= ARRAY_SIZE(cx18_card_list))
576                 return NULL;
577         return cx18_card_list[index];
578 }
579
580 int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input)
581 {
582         const struct cx18_card_video_input *card_input =
583                 cx->card->video_inputs + index;
584         static const char * const input_strs[] = {
585                 "Tuner 1",
586                 "S-Video 1",
587                 "S-Video 2",
588                 "Composite 1",
589                 "Composite 2",
590                 "Component 1"
591         };
592
593         if (index >= cx->nof_inputs)
594                 return -EINVAL;
595         input->index = index;
596         strscpy(input->name, input_strs[card_input->video_type - 1],
597                 sizeof(input->name));
598         input->type = (card_input->video_type == CX18_CARD_INPUT_VID_TUNER ?
599                         V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA);
600         input->audioset = (1 << cx->nof_audio_inputs) - 1;
601         input->std = (input->type == V4L2_INPUT_TYPE_TUNER) ?
602                                 cx->tuner_std : V4L2_STD_ALL;
603         return 0;
604 }
605
606 int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *audio)
607 {
608         const struct cx18_card_audio_input *aud_input =
609                 cx->card->audio_inputs + index;
610         static const char * const input_strs[] = {
611                 "Tuner 1",
612                 "Line In 1",
613                 "Line In 2"
614         };
615
616         memset(audio, 0, sizeof(*audio));
617         if (index >= cx->nof_audio_inputs)
618                 return -EINVAL;
619         strscpy(audio->name, input_strs[aud_input->audio_type - 1],
620                 sizeof(audio->name));
621         audio->index = index;
622         audio->capability = V4L2_AUDCAP_STEREO;
623         return 0;
624 }