drivers/media/dvb/dvb-usb/opera1.c

   1 /* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
   2 *
   3 * Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
   4 * Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
   5 *
   6 *       This program is free software; you can redistribute it and/or modify it
   7 *       under the terms of the GNU General Public License as published by the Free
   8 *       Software Foundation, version 2.
   9 *
  10 * see Documentation/dvb/README.dvb-usb for more information
  11 */
  12
  13 #define DVB_USB_LOG_PREFIX "opera"
  14
  15 #include "dvb-usb.h"
  16 #include "stv0299.h"
  17
  18 #define OPERA_READ_MSG 0
  19 #define OPERA_WRITE_MSG 1
  20 #define OPERA_I2C_TUNER 0xd1
  21
  22 #define READ_FX2_REG_REQ  0xba
  23 #define READ_MAC_ADDR 0x08
  24 #define OPERA_WRITE_FX2 0xbb
  25 #define OPERA_TUNER_REQ 0xb1
  26 #define REG_1F_SYMBOLRATE_BYTE0 0x1f
  27 #define REG_20_SYMBOLRATE_BYTE1 0x20
  28 #define REG_21_SYMBOLRATE_BYTE2 0x21
  29
  30 #define ADDR_B600_VOLTAGE_13V (0x02)
  31 #define ADDR_B601_VOLTAGE_18V (0x03)
  32 #define ADDR_B1A6_STREAM_CTRL (0x04)
  33 #define ADDR_B880_READ_REMOTE (0x05)
  34
  35 struct opera1_state {
  36         u32 last_key_pressed;
  37 };
  38 struct opera_rc_keys {
  39         u32 keycode;
  40         u32 event;
  41 };
  42
  43 static int dvb_usb_opera1_debug;
  44 module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
  45 MODULE_PARM_DESC(debug,
  46                  "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
  47                  DVB_USB_DEBUG_STATUS);
  48
  49 static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
  50                             u8 * data, u16 len, int flags)
  51 {
  52         int ret;
  53         u8 r;
  54         u8 u8buf[len];
  55
  56         unsigned int pipe = (flags == OPERA_READ_MSG) ?
  57                 usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
  58         u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
  59
  60         if (flags == OPERA_WRITE_MSG)
  61                 memcpy(u8buf, data, len);
  62         ret =
  63                 usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
  64                         value, 0x0, u8buf, len, 2000);
  65
  66         if (request == OPERA_TUNER_REQ) {
  67                 if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
  68                                 OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
  69                                 0x01, 0x0, &r, 1, 2000)<1 || r!=0x08)
  70                                         return 0;
  71         }
  72         if (flags == OPERA_READ_MSG)
  73                 memcpy(data, u8buf, len);
  74         return ret;
  75 }
  76
  77 /* I2C */
  78
  79 static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
  80                                   u8 * buf, u16 len)
  81 {
  82         int ret = 0;
  83         u8 request;
  84         u16 value;
  85
  86         if (!dev) {
  87                 info("no usb_device");
  88                 return -EINVAL;
  89         }
  90         if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
  91                 return -EAGAIN;
  92
  93         switch (addr>>1){
  94                 case ADDR_B600_VOLTAGE_13V:
  95                         request=0xb6;
  96                         value=0x00;
  97                         break;
  98                 case ADDR_B601_VOLTAGE_18V:
  99                         request=0xb6;
 100                         value=0x01;
 101                         break;
 102                 case ADDR_B1A6_STREAM_CTRL:
 103                         request=0xb1;
 104                         value=0xa6;
 105                         break;
 106                 case ADDR_B880_READ_REMOTE:
 107                         request=0xb8;
 108                         value=0x80;
 109                         break;
 110                 default:
 111                         request=0xb1;
 112                         value=addr;
 113         }
 114         ret = opera1_xilinx_rw(dev->udev, request,
 115                 value, buf, len,
 116                 addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
 117
 118         mutex_unlock(&dev->usb_mutex);
 119         return ret;
 120 }
 121
 122 static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 123                            int num)
 124 {
 125         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 126         int i = 0, tmp = 0;
 127
 128         if (!d)
 129                 return -ENODEV;
 130         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 131                 return -EAGAIN;
 132
 133         for (i = 0; i < num; i++) {
 134                 if ((tmp = opera1_usb_i2c_msgxfer(d,
 135                                         (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
 136                                         msg[i].buf,
 137                                         msg[i].len
 138                                         )!= msg[i].len)) {
 139                         break;
 140                 }
 141                 if (dvb_usb_opera1_debug & 0x10)
 142                         info("sending i2c mesage %d %d", tmp, msg[i].len);
 143         }
 144         mutex_unlock(&d->i2c_mutex);
 145         return num;
 146 }
 147
 148 static u32 opera1_i2c_func(struct i2c_adapter *adapter)
 149 {
 150         return I2C_FUNC_I2C;
 151 }
 152
 153 static struct i2c_algorithm opera1_i2c_algo = {
 154         .master_xfer = opera1_i2c_xfer,
 155         .functionality = opera1_i2c_func,
 156 };
 157
 158 static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 159 {
 160         static u8 command_13v[1]={0x00};
 161         static u8 command_18v[1]={0x01};
 162         struct i2c_msg msg[] = {
 163                 {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
 164         };
 165         struct dvb_usb_adapter *udev_adap =
 166             (struct dvb_usb_adapter *)(fe->dvb->priv);
 167         if (voltage == SEC_VOLTAGE_18) {
 168                 msg[0].addr = ADDR_B601_VOLTAGE_18V;
 169                 msg[0].buf = command_18v;
 170         }
 171         i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
 172         return 0;
 173 }
 174
 175 static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
 176                                           u32 ratio)
 177 {
 178         stv0299_writereg(fe, 0x13, 0x98);
 179         stv0299_writereg(fe, 0x14, 0x95);
 180         stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
 181         stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
 182         stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
 183         return 0;
 184
 185 }
 186 static u8 opera1_inittab[] = {
 187         0x00, 0xa1,
 188         0x01, 0x15,
 189         0x02, 0x00,
 190         0x03, 0x00,
 191         0x04, 0x7d,
 192         0x05, 0x05,
 193         0x06, 0x02,
 194         0x07, 0x00,
 195         0x0b, 0x00,
 196         0x0c, 0x01,
 197         0x0d, 0x81,
 198         0x0e, 0x44,
 199         0x0f, 0x19,
 200         0x10, 0x3f,
 201         0x11, 0x84,
 202         0x12, 0xda,
 203         0x13, 0x98,
 204         0x14, 0x95,
 205         0x15, 0xc9,
 206         0x16, 0xeb,
 207         0x17, 0x00,
 208         0x18, 0x19,
 209         0x19, 0x8b,
 210         0x1a, 0x00,
 211         0x1b, 0x82,
 212         0x1c, 0x7f,
 213         0x1d, 0x00,
 214         0x1e, 0x00,
 215         REG_1F_SYMBOLRATE_BYTE0, 0x06,
 216         REG_20_SYMBOLRATE_BYTE1, 0x50,
 217         REG_21_SYMBOLRATE_BYTE2, 0x10,
 218         0x22, 0x00,
 219         0x23, 0x00,
 220         0x24, 0x37,
 221         0x25, 0xbc,
 222         0x26, 0x00,
 223         0x27, 0x00,
 224         0x28, 0x00,
 225         0x29, 0x1e,
 226         0x2a, 0x14,
 227         0x2b, 0x1f,
 228         0x2c, 0x09,
 229         0x2d, 0x0a,
 230         0x2e, 0x00,
 231         0x2f, 0x00,
 232         0x30, 0x00,
 233         0x31, 0x1f,
 234         0x32, 0x19,
 235         0x33, 0xfc,
 236         0x34, 0x13,
 237         0xff, 0xff,
 238 };
 239
 240 static struct stv0299_config opera1_stv0299_config = {
 241         .demod_address = 0xd0>>1,
 242         .min_delay_ms = 100,
 243         .mclk = 88000000UL,
 244         .invert = 1,
 245         .skip_reinit = 0,
 246         .lock_output = STV0229_LOCKOUTPUT_0,
 247         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 248         .inittab = opera1_inittab,
 249         .set_symbol_rate = opera1_stv0299_set_symbol_rate,
 250 };
 251
 252 static int opera1_frontend_attach(struct dvb_usb_adapter *d)
 253 {
 254         if ((d->fe =
 255              dvb_attach(stv0299_attach, &opera1_stv0299_config,
 256                         &d->dev->i2c_adap)) != NULL) {
 257                 d->fe->ops.set_voltage = opera1_set_voltage;
 258                 return 0;
 259         }
 260         info("not attached stv0299");
 261         return -EIO;
 262 }
 263
 264 static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
 265 {
 266         dvb_attach(
 267                 dvb_pll_attach, adap->fe, 0xc0>>1,
 268                 &adap->dev->i2c_adap, DVB_PLL_OPERA1
 269         );
 270         return 0;
 271 }
 272
 273 static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
 274 {
 275         u8 val = onoff ? 0x01 : 0x00;
 276
 277         if (dvb_usb_opera1_debug)
 278                 info("power %s", onoff ? "on" : "off");
 279         return opera1_xilinx_rw(d->udev, 0xb7, val,
 280                                 &val, 1, OPERA_WRITE_MSG);
 281 }
 282
 283 static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 284 {
 285         static u8 buf_start[2] = { 0xff, 0x03 };
 286         static u8 buf_stop[2] = { 0xff, 0x00 };
 287         struct i2c_msg start_tuner[] = {
 288                 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
 289         };
 290         if (dvb_usb_opera1_debug)
 291                 info("streaming %s", onoff ? "on" : "off");
 292         i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
 293         return 0;
 294 }
 295
 296 static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
 297                              int onoff)
 298 {
 299         u8 b_pid[3];
 300         struct i2c_msg msg[] = {
 301                 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
 302         };
 303         if (dvb_usb_opera1_debug)
 304                 info("pidfilter index: %d pid: %d %s", index, pid,
 305                         onoff ? "on" : "off");
 306         b_pid[0] = (2 * index) + 4;
 307         b_pid[1] = onoff ? (pid & 0xff) : (0x00);
 308         b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
 309         i2c_transfer(&adap->dev->i2c_adap, msg, 1);
 310         return 0;
 311 }
 312
 313 static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
 314 {
 315         int u = 0x04;
 316         u8 b_pid[3];
 317         struct i2c_msg msg[] = {
 318                 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
 319         };
 320         if (dvb_usb_opera1_debug)
 321                 info("%s hw-pidfilter", onoff ? "enable" : "disable");
 322         for (; u < 0x7e; u += 2) {
 323                 b_pid[0] = u;
 324                 b_pid[1] = 0;
 325                 b_pid[2] = 0x80;
 326                 i2c_transfer(&adap->dev->i2c_adap, msg, 1);
 327         }
 328         return 0;
 329 }
 330
 331 static struct dvb_usb_rc_key opera1_rc_keys[] = {
 332         {0x5f, 0xa0, KEY_1},
 333         {0x51, 0xaf, KEY_2},
 334         {0x5d, 0xa2, KEY_3},
 335         {0x41, 0xbe, KEY_4},
 336         {0x0b, 0xf5, KEY_5},
 337         {0x43, 0xbd, KEY_6},
 338         {0x47, 0xb8, KEY_7},
 339         {0x49, 0xb6, KEY_8},
 340         {0x05, 0xfa, KEY_9},
 341         {0x45, 0xba, KEY_0},
 342         {0x09, 0xf6, KEY_UP},   /*chanup */
 343         {0x1b, 0xe5, KEY_DOWN}, /*chandown */
 344         {0x5d, 0xa3, KEY_LEFT}, /*voldown */
 345         {0x5f, 0xa1, KEY_RIGHT},        /*volup */
 346         {0x07, 0xf8, KEY_SPACE},        /*tab */
 347         {0x1f, 0xe1, KEY_ENTER},        /*play ok */
 348         {0x1b, 0xe4, KEY_Z},    /*zoom */
 349         {0x59, 0xa6, KEY_M},    /*mute */
 350         {0x5b, 0xa5, KEY_F},    /*tv/f */
 351         {0x19, 0xe7, KEY_R},    /*rec */
 352         {0x01, 0xfe, KEY_S},    /*Stop */
 353         {0x03, 0xfd, KEY_P},    /*pause */
 354         {0x03, 0xfc, KEY_W},    /*<- -> */
 355         {0x07, 0xf9, KEY_C},    /*capture */
 356         {0x47, 0xb9, KEY_Q},    /*exit */
 357         {0x43, 0xbc, KEY_O},    /*power */
 358
 359 };
 360
 361 static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
 362 {
 363         struct opera1_state *opst = dev->priv;
 364         u8 rcbuffer[32];
 365         const u16 startmarker1 = 0x10ed;
 366         const u16 startmarker2 = 0x11ec;
 367         struct i2c_msg read_remote[] = {
 368                 {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
 369         };
 370         int i = 0;
 371         u32 send_key = 0;
 372
 373         if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
 374                 for (i = 0; i < 32; i++) {
 375                         if (rcbuffer[i])
 376                                 send_key |= 1;
 377                         if (i < 31)
 378                                 send_key = send_key << 1;
 379                 }
 380                 if (send_key & 0x8000)
 381                         send_key = (send_key << 1) | (send_key >> 15 & 0x01);
 382
 383                 if (send_key == 0xffff && opst->last_key_pressed != 0) {
 384                         *state = REMOTE_KEY_REPEAT;
 385                         *event = opst->last_key_pressed;
 386                         return 0;
 387                 }
 388                 for (; send_key != 0;) {
 389                         if (send_key >> 16 == startmarker2) {
 390                                 break;
 391                         } else if (send_key >> 16 == startmarker1) {
 392                                 send_key =
 393                                         (send_key & 0xfffeffff) | (startmarker1 << 16);
 394                                 break;
 395                         } else
 396                                 send_key >>= 1;
 397                 }
 398
 399                 if (send_key == 0)
 400                         return 0;
 401
 402                 send_key = (send_key & 0xffff) | 0x0100;
 403
 404                 for (i = 0; i < ARRAY_SIZE(opera1_rc_keys); i++) {
 405                         if ((opera1_rc_keys[i].custom * 256 +
 406                                         opera1_rc_keys[i].data) == (send_key & 0xffff)) {
 407                                 *state = REMOTE_KEY_PRESSED;
 408                                 *event = opera1_rc_keys[i].event;
 409                                 opst->last_key_pressed =
 410                                         opera1_rc_keys[i].event;
 411                                 break;
 412                         }
 413                         opst->last_key_pressed = 0;
 414                 }
 415         } else
 416                 *state = REMOTE_NO_KEY_PRESSED;
 417         return 0;
 418 }
 419
 420 static struct usb_device_id opera1_table[] = {
 421         {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},
 422         {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},
 423         {}
 424 };
 425
 426 MODULE_DEVICE_TABLE(usb, opera1_table);
 427
 428 static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 429 {
 430         u8 command[] = { READ_MAC_ADDR };
 431         opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
 432         opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
 433         return 0;
 434 }
 435 static int opera1_xilinx_load_firmware(struct usb_device *dev,
 436                                        const char *filename)
 437 {
 438         const struct firmware *fw = NULL;
 439         u8 *b, *p;
 440         int ret = 0, i,fpgasize=40;
 441         u8 testval;
 442         info("start downloading fpga firmware %s",filename);
 443
 444         if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
 445                 err("did not find the firmware file. (%s) "
 446                         "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
 447                         filename);
 448                 return ret;
 449         } else {
 450                 p = kmalloc(fw->size, GFP_KERNEL);
 451                 opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
 452                 if (p != NULL && testval != 0x67) {
 453
 454                         u8 reset = 0, fpga_command = 0;
 455                         memcpy(p, fw->data, fw->size);
 456                         /* clear fpga ? */
 457                         opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
 458                                          OPERA_WRITE_MSG);
 459                         for (i = 0; i < fw->size;) {
 460                                 if ( (fw->size - i) <fpgasize){
 461                                     fpgasize=fw->size-i;
 462                                 }
 463                                 b = (u8 *) p + i;
 464                                 if (opera1_xilinx_rw
 465                                         (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
 466                                                 OPERA_WRITE_MSG) != fpgasize
 467                                         ) {
 468                                         err("error while transferring firmware");
 469                                         ret = -EINVAL;
 470                                         break;
 471                                 }
 472                                 i = i + fpgasize;
 473                         }
 474                         /* restart the CPU */
 475                         if (ret || opera1_xilinx_rw
 476                                         (dev, 0xa0, 0xe600, &reset, 1,
 477                                         OPERA_WRITE_MSG) != 1) {
 478                                 err("could not restart the USB controller CPU.");
 479                                 ret = -EINVAL;
 480                         }
 481                 }
 482         }
 483         kfree(p);
 484         if (fw) {
 485                 release_firmware(fw);
 486         }
 487         return ret;
 488 }
 489
 490 static struct dvb_usb_device_properties opera1_properties = {
 491         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 492         .usb_ctrl = CYPRESS_FX2,
 493         .firmware = "dvb-usb-opera-01.fw",
 494         .size_of_priv = sizeof(struct opera1_state),
 495
 496         .power_ctrl = opera1_power_ctrl,
 497         .i2c_algo = &opera1_i2c_algo,
 498
 499         .rc_key_map = opera1_rc_keys,
 500         .rc_key_map_size = ARRAY_SIZE(opera1_rc_keys),
 501         .rc_interval = 200,
 502         .rc_query = opera1_rc_query,
 503         .read_mac_address = opera1_read_mac_address,
 504         .generic_bulk_ctrl_endpoint = 0x00,
 505         /* parameter for the MPEG2-data transfer */
 506         .num_adapters = 1,
 507         .adapter = {
 508                 {
 509                         .frontend_attach = opera1_frontend_attach,
 510                         .streaming_ctrl = opera1_streaming_ctrl,
 511                         .tuner_attach = opera1_tuner_attach,
 512                         .caps =
 513                                 DVB_USB_ADAP_HAS_PID_FILTER |
 514                                 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 515                         .pid_filter = opera1_pid_filter,
 516                         .pid_filter_ctrl = opera1_pid_filter_control,
 517                         .pid_filter_count = 252,
 518                         .stream = {
 519                                 .type = USB_BULK,
 520                                 .count = 10,
 521                                 .endpoint = 0x82,
 522                                 .u = {
 523                                         .bulk = {
 524                                                 .buffersize = 4096,
 525                                         }
 526                                 }
 527                         },
 528                 }
 529         },
 530         .num_device_descs = 1,
 531         .devices = {
 532                 {"Opera1 DVB-S USB2.0",
 533                         {&opera1_table[0], NULL},
 534                         {&opera1_table[1], NULL},
 535                 },
 536         }
 537 };
 538
 539 static int opera1_probe(struct usb_interface *intf,
 540                         const struct usb_device_id *id)
 541 {
 542         struct usb_device *udev = interface_to_usbdev(intf);
 543
 544         if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
 545                 udev->descriptor.idVendor == USB_VID_OPERA1 &&
 546                 opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
 547             ) {
 548                 return -EINVAL;
 549         }
 550
 551         if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, NULL) != 0)
 552                 return -EINVAL;
 553         return 0;
 554 }
 555
 556 static struct usb_driver opera1_driver = {
 557         .name = "opera1",
 558         .probe = opera1_probe,
 559         .disconnect = dvb_usb_device_exit,
 560         .id_table = opera1_table,
 561 };
 562
 563 static int __init opera1_module_init(void)
 564 {
 565         int result = 0;
 566         if ((result = usb_register(&opera1_driver))) {
 567                 err("usb_register failed. Error number %d", result);
 568         }
 569         return result;
 570 }
 571
 572 static void __exit opera1_module_exit(void)
 573 {
 574         usb_deregister(&opera1_driver);
 575 }
 576
 577 module_init(opera1_module_init);
 578 module_exit(opera1_module_exit);
 579
 580 MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
 581 MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
 582 MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
 583 MODULE_VERSION("0.1");
 584 MODULE_LICENSE("GPL");