Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next
[sfrench/cifs-2.6.git] / drivers / media / dvb-core / dvb_ca_en50221.c
1 /*
2  * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces
3  *
4  * Copyright (C) 2004 Andrew de Quincey
5  *
6  * Parts of this file were based on sources as follows:
7  *
8  * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de>
9  *
10  * based on code:
11  *
12  * Copyright (C) 1999-2002 Ralph  Metzler
13  *                       & Marcus Metzler for convergence integrated media GmbH
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License
17  * as published by the Free Software Foundation; either version 2
18  * of the License, or (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  * To obtain the license, point your browser to
25  * http://www.gnu.org/copyleft/gpl.html
26  */
27
28 #define pr_fmt(fmt) "dvb_ca_en50221: " fmt
29
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/list.h>
33 #include <linux/module.h>
34 #include <linux/vmalloc.h>
35 #include <linux/delay.h>
36 #include <linux/spinlock.h>
37 #include <linux/sched/signal.h>
38 #include <linux/kthread.h>
39
40 #include "dvb_ca_en50221.h"
41 #include "dvb_ringbuffer.h"
42
43 static int dvb_ca_en50221_debug;
44
45 module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644);
46 MODULE_PARM_DESC(cam_debug, "enable verbose debug messages");
47
48 #define dprintk(fmt, arg...) do {                                       \
49         if (dvb_ca_en50221_debug)                                       \
50                 printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\
51 } while (0)
52
53 #define INIT_TIMEOUT_SECS 10
54
55 #define HOST_LINK_BUF_SIZE 0x200
56
57 #define RX_BUFFER_SIZE 65535
58
59 #define MAX_RX_PACKETS_PER_ITERATION 10
60
61 #define CTRLIF_DATA      0
62 #define CTRLIF_COMMAND   1
63 #define CTRLIF_STATUS    1
64 #define CTRLIF_SIZE_LOW  2
65 #define CTRLIF_SIZE_HIGH 3
66
67 #define CMDREG_HC        1      /* Host control */
68 #define CMDREG_SW        2      /* Size write */
69 #define CMDREG_SR        4      /* Size read */
70 #define CMDREG_RS        8      /* Reset interface */
71 #define CMDREG_FRIE   0x40      /* Enable FR interrupt */
72 #define CMDREG_DAIE   0x80      /* Enable DA interrupt */
73 #define IRQEN (CMDREG_DAIE)
74
75 #define STATUSREG_RE     1      /* read error */
76 #define STATUSREG_WE     2      /* write error */
77 #define STATUSREG_FR  0x40      /* module free */
78 #define STATUSREG_DA  0x80      /* data available */
79
80 #define DVB_CA_SLOTSTATE_NONE           0
81 #define DVB_CA_SLOTSTATE_UNINITIALISED  1
82 #define DVB_CA_SLOTSTATE_RUNNING        2
83 #define DVB_CA_SLOTSTATE_INVALID        3
84 #define DVB_CA_SLOTSTATE_WAITREADY      4
85 #define DVB_CA_SLOTSTATE_VALIDATE       5
86 #define DVB_CA_SLOTSTATE_WAITFR         6
87 #define DVB_CA_SLOTSTATE_LINKINIT       7
88
89 /* Information on a CA slot */
90 struct dvb_ca_slot {
91         /* current state of the CAM */
92         int slot_state;
93
94         /* mutex used for serializing access to one CI slot */
95         struct mutex slot_lock;
96
97         /* Number of CAMCHANGES that have occurred since last processing */
98         atomic_t camchange_count;
99
100         /* Type of last CAMCHANGE */
101         int camchange_type;
102
103         /* base address of CAM config */
104         u32 config_base;
105
106         /* value to write into Config Control register */
107         u8 config_option;
108
109         /* if 1, the CAM supports DA IRQs */
110         u8 da_irq_supported:1;
111
112         /* size of the buffer to use when talking to the CAM */
113         int link_buf_size;
114
115         /* buffer for incoming packets */
116         struct dvb_ringbuffer rx_buffer;
117
118         /* timer used during various states of the slot */
119         unsigned long timeout;
120 };
121
122 /* Private CA-interface information */
123 struct dvb_ca_private {
124         struct kref refcount;
125
126         /* pointer back to the public data structure */
127         struct dvb_ca_en50221 *pub;
128
129         /* the DVB device */
130         struct dvb_device *dvbdev;
131
132         /* Flags describing the interface (DVB_CA_FLAG_*) */
133         u32 flags;
134
135         /* number of slots supported by this CA interface */
136         unsigned int slot_count;
137
138         /* information on each slot */
139         struct dvb_ca_slot *slot_info;
140
141         /* wait queues for read() and write() operations */
142         wait_queue_head_t wait_queue;
143
144         /* PID of the monitoring thread */
145         struct task_struct *thread;
146
147         /* Flag indicating if the CA device is open */
148         unsigned int open:1;
149
150         /* Flag indicating the thread should wake up now */
151         unsigned int wakeup:1;
152
153         /* Delay the main thread should use */
154         unsigned long delay;
155
156         /*
157          * Slot to start looking for data to read from in the next user-space
158          * read operation
159          */
160         int next_read_slot;
161
162         /* mutex serializing ioctls */
163         struct mutex ioctl_mutex;
164 };
165
166 static void dvb_ca_private_free(struct dvb_ca_private *ca)
167 {
168         unsigned int i;
169
170         dvb_free_device(ca->dvbdev);
171         for (i = 0; i < ca->slot_count; i++)
172                 vfree(ca->slot_info[i].rx_buffer.data);
173
174         kfree(ca->slot_info);
175         kfree(ca);
176 }
177
178 static void dvb_ca_private_release(struct kref *ref)
179 {
180         struct dvb_ca_private *ca;
181
182         ca = container_of(ref, struct dvb_ca_private, refcount);
183         dvb_ca_private_free(ca);
184 }
185
186 static void dvb_ca_private_get(struct dvb_ca_private *ca)
187 {
188         kref_get(&ca->refcount);
189 }
190
191 static void dvb_ca_private_put(struct dvb_ca_private *ca)
192 {
193         kref_put(&ca->refcount, dvb_ca_private_release);
194 }
195
196 static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
197 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
198                                     u8 *ebuf, int ecount);
199 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
200                                      u8 *ebuf, int ecount);
201
202 /**
203  * Safely find needle in haystack.
204  *
205  * @haystack: Buffer to look in.
206  * @hlen: Number of bytes in haystack.
207  * @needle: Buffer to find.
208  * @nlen: Number of bytes in needle.
209  * return: Pointer into haystack needle was found at, or NULL if not found.
210  */
211 static char *findstr(char *haystack, int hlen, char *needle, int nlen)
212 {
213         int i;
214
215         if (hlen < nlen)
216                 return NULL;
217
218         for (i = 0; i <= hlen - nlen; i++) {
219                 if (!strncmp(haystack + i, needle, nlen))
220                         return haystack + i;
221         }
222
223         return NULL;
224 }
225
226 /* ************************************************************************** */
227 /* EN50221 physical interface functions */
228
229 /*
230  * dvb_ca_en50221_check_camstatus - Check CAM status.
231  */
232 static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
233 {
234         struct dvb_ca_slot *sl = &ca->slot_info[slot];
235         int slot_status;
236         int cam_present_now;
237         int cam_changed;
238
239         /* IRQ mode */
240         if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
241                 return (atomic_read(&sl->camchange_count) != 0);
242
243         /* poll mode */
244         slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open);
245
246         cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0;
247         cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0;
248         if (!cam_changed) {
249                 int cam_present_old = (sl->slot_state != DVB_CA_SLOTSTATE_NONE);
250
251                 cam_changed = (cam_present_now != cam_present_old);
252         }
253
254         if (cam_changed) {
255                 if (!cam_present_now)
256                         sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
257                 else
258                         sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED;
259                 atomic_set(&sl->camchange_count, 1);
260         } else {
261                 if ((sl->slot_state == DVB_CA_SLOTSTATE_WAITREADY) &&
262                     (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) {
263                         /* move to validate state if reset is completed */
264                         sl->slot_state = DVB_CA_SLOTSTATE_VALIDATE;
265                 }
266         }
267
268         return cam_changed;
269 }
270
271 /**
272  * dvb_ca_en50221_wait_if_status - Wait for flags to become set on the STATUS
273  *       register on a CAM interface, checking for errors and timeout.
274  *
275  * @ca: CA instance.
276  * @slot: Slot on interface.
277  * @waitfor: Flags to wait for.
278  * @timeout_hz: Timeout in milliseconds.
279  *
280  * return: 0 on success, nonzero on error.
281  */
282 static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
283                                          u8 waitfor, int timeout_hz)
284 {
285         unsigned long timeout;
286         unsigned long start;
287
288         dprintk("%s\n", __func__);
289
290         /* loop until timeout elapsed */
291         start = jiffies;
292         timeout = jiffies + timeout_hz;
293         while (1) {
294                 int res;
295
296                 /* read the status and check for error */
297                 res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
298                 if (res < 0)
299                         return -EIO;
300
301                 /* if we got the flags, it was successful! */
302                 if (res & waitfor) {
303                         dprintk("%s succeeded timeout:%lu\n",
304                                 __func__, jiffies - start);
305                         return 0;
306                 }
307
308                 /* check for timeout */
309                 if (time_after(jiffies, timeout))
310                         break;
311
312                 /* wait for a bit */
313                 usleep_range(1000, 1100);
314         }
315
316         dprintk("%s failed timeout:%lu\n", __func__, jiffies - start);
317
318         /* if we get here, we've timed out */
319         return -ETIMEDOUT;
320 }
321
322 /**
323  * dvb_ca_en50221_link_init - Initialise the link layer connection to a CAM.
324  *
325  * @ca: CA instance.
326  * @slot: Slot id.
327  *
328  * return: 0 on success, nonzero on failure.
329  */
330 static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
331 {
332         struct dvb_ca_slot *sl = &ca->slot_info[slot];
333         int ret;
334         int buf_size;
335         u8 buf[2];
336
337         dprintk("%s\n", __func__);
338
339         /* we'll be determining these during this function */
340         sl->da_irq_supported = 0;
341
342         /*
343          * set the host link buffer size temporarily. it will be overwritten
344          * with the real negotiated size later.
345          */
346         sl->link_buf_size = 2;
347
348         /* read the buffer size from the CAM */
349         ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
350                                          IRQEN | CMDREG_SR);
351         if (ret)
352                 return ret;
353         ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ);
354         if (ret)
355                 return ret;
356         ret = dvb_ca_en50221_read_data(ca, slot, buf, 2);
357         if (ret != 2)
358                 return -EIO;
359         ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
360         if (ret)
361                 return ret;
362
363         /*
364          * store it, and choose the minimum of our buffer and the CAM's buffer
365          * size
366          */
367         buf_size = (buf[0] << 8) | buf[1];
368         if (buf_size > HOST_LINK_BUF_SIZE)
369                 buf_size = HOST_LINK_BUF_SIZE;
370         sl->link_buf_size = buf_size;
371         buf[0] = buf_size >> 8;
372         buf[1] = buf_size & 0xff;
373         dprintk("Chosen link buffer size of %i\n", buf_size);
374
375         /* write the buffer size to the CAM */
376         ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
377                                          IRQEN | CMDREG_SW);
378         if (ret)
379                 return ret;
380         ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10);
381         if (ret)
382                 return ret;
383         ret = dvb_ca_en50221_write_data(ca, slot, buf, 2);
384         if (ret != 2)
385                 return -EIO;
386         ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
387         if (ret)
388                 return ret;
389
390         /* success */
391         return 0;
392 }
393
394 /**
395  * dvb_ca_en50221_read_tuple - Read a tuple from attribute memory.
396  *
397  * @ca: CA instance.
398  * @slot: Slot id.
399  * @address: Address to read from. Updated.
400  * @tuple_type: Tuple id byte. Updated.
401  * @tuple_length: Tuple length. Updated.
402  * @tuple: Dest buffer for tuple (must be 256 bytes). Updated.
403  *
404  * return: 0 on success, nonzero on error.
405  */
406 static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
407                                      int *address, int *tuple_type,
408                                      int *tuple_length, u8 *tuple)
409 {
410         int i;
411         int _tuple_type;
412         int _tuple_length;
413         int _address = *address;
414
415         /* grab the next tuple length and type */
416         _tuple_type = ca->pub->read_attribute_mem(ca->pub, slot, _address);
417         if (_tuple_type < 0)
418                 return _tuple_type;
419         if (_tuple_type == 0xff) {
420                 dprintk("END OF CHAIN TUPLE type:0x%x\n", _tuple_type);
421                 *address += 2;
422                 *tuple_type = _tuple_type;
423                 *tuple_length = 0;
424                 return 0;
425         }
426         _tuple_length = ca->pub->read_attribute_mem(ca->pub, slot,
427                                                     _address + 2);
428         if (_tuple_length < 0)
429                 return _tuple_length;
430         _address += 4;
431
432         dprintk("TUPLE type:0x%x length:%i\n", _tuple_type, _tuple_length);
433
434         /* read in the whole tuple */
435         for (i = 0; i < _tuple_length; i++) {
436                 tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot,
437                                                        _address + (i * 2));
438                 dprintk("  0x%02x: 0x%02x %c\n",
439                         i, tuple[i] & 0xff,
440                         ((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.');
441         }
442         _address += (_tuple_length * 2);
443
444         /* success */
445         *tuple_type = _tuple_type;
446         *tuple_length = _tuple_length;
447         *address = _address;
448         return 0;
449 }
450
451 /**
452  * dvb_ca_en50221_parse_attributes - Parse attribute memory of a CAM module,
453  *      extracting Config register, and checking it is a DVB CAM module.
454  *
455  * @ca: CA instance.
456  * @slot: Slot id.
457  *
458  * return: 0 on success, <0 on failure.
459  */
460 static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot)
461 {
462         struct dvb_ca_slot *sl;
463         int address = 0;
464         int tuple_length;
465         int tuple_type;
466         u8 tuple[257];
467         char *dvb_str;
468         int rasz;
469         int status;
470         int got_cftableentry = 0;
471         int end_chain = 0;
472         int i;
473         u16 manfid = 0;
474         u16 devid = 0;
475
476         /* CISTPL_DEVICE_0A */
477         status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type,
478                                            &tuple_length, tuple);
479         if (status < 0)
480                 return status;
481         if (tuple_type != 0x1D)
482                 return -EINVAL;
483
484         /* CISTPL_DEVICE_0C */
485         status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type,
486                                            &tuple_length, tuple);
487         if (status < 0)
488                 return status;
489         if (tuple_type != 0x1C)
490                 return -EINVAL;
491
492         /* CISTPL_VERS_1 */
493         status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type,
494                                            &tuple_length, tuple);
495         if (status < 0)
496                 return status;
497         if (tuple_type != 0x15)
498                 return -EINVAL;
499
500         /* CISTPL_MANFID */
501         status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type,
502                                            &tuple_length, tuple);
503         if (status < 0)
504                 return status;
505         if (tuple_type != 0x20)
506                 return -EINVAL;
507         if (tuple_length != 4)
508                 return -EINVAL;
509         manfid = (tuple[1] << 8) | tuple[0];
510         devid = (tuple[3] << 8) | tuple[2];
511
512         /* CISTPL_CONFIG */
513         status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tuple_type,
514                                            &tuple_length, tuple);
515         if (status < 0)
516                 return status;
517         if (tuple_type != 0x1A)
518                 return -EINVAL;
519         if (tuple_length < 3)
520                 return -EINVAL;
521
522         /* extract the configbase */
523         rasz = tuple[0] & 3;
524         if (tuple_length < (3 + rasz + 14))
525                 return -EINVAL;
526         sl = &ca->slot_info[slot];
527         sl->config_base = 0;
528         for (i = 0; i < rasz + 1; i++)
529                 sl->config_base |= (tuple[2 + i] << (8 * i));
530
531         /* check it contains the correct DVB string */
532         dvb_str = findstr((char *)tuple, tuple_length, "DVB_CI_V", 8);
533         if (!dvb_str)
534                 return -EINVAL;
535         if (tuple_length < ((dvb_str - (char *)tuple) + 12))
536                 return -EINVAL;
537
538         /* is it a version we support? */
539         if (strncmp(dvb_str + 8, "1.00", 4)) {
540                 pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",
541                        ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9],
542                        dvb_str[10], dvb_str[11]);
543                 return -EINVAL;
544         }
545
546         /* process the CFTABLE_ENTRY tuples, and any after those */
547         while ((!end_chain) && (address < 0x1000)) {
548                 status = dvb_ca_en50221_read_tuple(ca, slot, &address,
549                                                    &tuple_type, &tuple_length,
550                                                    tuple);
551                 if (status < 0)
552                         return status;
553                 switch (tuple_type) {
554                 case 0x1B:      /* CISTPL_CFTABLE_ENTRY */
555                         if (tuple_length < (2 + 11 + 17))
556                                 break;
557
558                         /* if we've already parsed one, just use it */
559                         if (got_cftableentry)
560                                 break;
561
562                         /* get the config option */
563                         sl->config_option = tuple[0] & 0x3f;
564
565                         /* OK, check it contains the correct strings */
566                         if (!findstr((char *)tuple, tuple_length,
567                                      "DVB_HOST", 8) ||
568                             !findstr((char *)tuple, tuple_length,
569                                      "DVB_CI_MODULE", 13))
570                                 break;
571
572                         got_cftableentry = 1;
573                         break;
574
575                 case 0x14:      /* CISTPL_NO_LINK */
576                         break;
577
578                 case 0xFF:      /* CISTPL_END */
579                         end_chain = 1;
580                         break;
581
582                 default:        /* Unknown tuple type - just skip this tuple */
583                         dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n",
584                                 tuple_type, tuple_length);
585                         break;
586                 }
587         }
588
589         if ((address > 0x1000) || (!got_cftableentry))
590                 return -EINVAL;
591
592         dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n",
593                 manfid, devid, sl->config_base, sl->config_option);
594
595         /* success! */
596         return 0;
597 }
598
599 /**
600  * dvb_ca_en50221_set_configoption - Set CAM's configoption correctly.
601  *
602  * @ca: CA instance.
603  * @slot: Slot containing the CAM.
604  */
605 static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot)
606 {
607         struct dvb_ca_slot *sl = &ca->slot_info[slot];
608         int configoption;
609
610         dprintk("%s\n", __func__);
611
612         /* set the config option */
613         ca->pub->write_attribute_mem(ca->pub, slot, sl->config_base,
614                                      sl->config_option);
615
616         /* check it */
617         configoption = ca->pub->read_attribute_mem(ca->pub, slot,
618                                                    sl->config_base);
619         dprintk("Set configoption 0x%x, read configoption 0x%x\n",
620                 sl->config_option, configoption & 0x3f);
621
622         /* fine! */
623         return 0;
624 }
625
626 /**
627  * dvb_ca_en50221_read_data - This function talks to an EN50221 CAM control
628  *      interface. It reads a buffer of data from the CAM. The data can either
629  *      be stored in a supplied buffer, or automatically be added to the slot's
630  *      rx_buffer.
631  *
632  * @ca: CA instance.
633  * @slot: Slot to read from.
634  * @ebuf: If non-NULL, the data will be written to this buffer. If NULL,
635  *        the data will be added into the buffering system as a normal
636  *        fragment.
637  * @ecount: Size of ebuf. Ignored if ebuf is NULL.
638  *
639  * return: Number of bytes read, or < 0 on error
640  */
641 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
642                                     u8 *ebuf, int ecount)
643 {
644         struct dvb_ca_slot *sl = &ca->slot_info[slot];
645         int bytes_read;
646         int status;
647         u8 buf[HOST_LINK_BUF_SIZE];
648         int i;
649
650         dprintk("%s\n", __func__);
651
652         /* check if we have space for a link buf in the rx_buffer */
653         if (!ebuf) {
654                 int buf_free;
655
656                 if (!sl->rx_buffer.data) {
657                         status = -EIO;
658                         goto exit;
659                 }
660                 buf_free = dvb_ringbuffer_free(&sl->rx_buffer);
661
662                 if (buf_free < (sl->link_buf_size +
663                                 DVB_RINGBUFFER_PKTHDRSIZE)) {
664                         status = -EAGAIN;
665                         goto exit;
666                 }
667         }
668
669         if (ca->pub->read_data &&
670             (sl->slot_state != DVB_CA_SLOTSTATE_LINKINIT)) {
671                 if (!ebuf)
672                         status = ca->pub->read_data(ca->pub, slot, buf,
673                                                     sizeof(buf));
674                 else
675                         status = ca->pub->read_data(ca->pub, slot, buf, ecount);
676                 if (status < 0)
677                         return status;
678                 bytes_read =  status;
679                 if (status == 0)
680                         goto exit;
681         } else {
682                 /* check if there is data available */
683                 status = ca->pub->read_cam_control(ca->pub, slot,
684                                                    CTRLIF_STATUS);
685                 if (status < 0)
686                         goto exit;
687                 if (!(status & STATUSREG_DA)) {
688                         /* no data */
689                         status = 0;
690                         goto exit;
691                 }
692
693                 /* read the amount of data */
694                 status = ca->pub->read_cam_control(ca->pub, slot,
695                                                    CTRLIF_SIZE_HIGH);
696                 if (status < 0)
697                         goto exit;
698                 bytes_read = status << 8;
699                 status = ca->pub->read_cam_control(ca->pub, slot,
700                                                    CTRLIF_SIZE_LOW);
701                 if (status < 0)
702                         goto exit;
703                 bytes_read |= status;
704
705                 /* check it will fit */
706                 if (!ebuf) {
707                         if (bytes_read > sl->link_buf_size) {
708                                 pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
709                                        ca->dvbdev->adapter->num, bytes_read,
710                                        sl->link_buf_size);
711                                 sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT;
712                                 status = -EIO;
713                                 goto exit;
714                         }
715                         if (bytes_read < 2) {
716                                 pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
717                                        ca->dvbdev->adapter->num);
718                                 sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT;
719                                 status = -EIO;
720                                 goto exit;
721                         }
722                 } else {
723                         if (bytes_read > ecount) {
724                                 pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
725                                        ca->dvbdev->adapter->num);
726                                 status = -EIO;
727                                 goto exit;
728                         }
729                 }
730
731                 /* fill the buffer */
732                 for (i = 0; i < bytes_read; i++) {
733                         /* read byte and check */
734                         status = ca->pub->read_cam_control(ca->pub, slot,
735                                                            CTRLIF_DATA);
736                         if (status < 0)
737                                 goto exit;
738
739                         /* OK, store it in the buffer */
740                         buf[i] = status;
741                 }
742
743                 /* check for read error (RE should now be 0) */
744                 status = ca->pub->read_cam_control(ca->pub, slot,
745                                                    CTRLIF_STATUS);
746                 if (status < 0)
747                         goto exit;
748                 if (status & STATUSREG_RE) {
749                         sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT;
750                         status = -EIO;
751                         goto exit;
752                 }
753         }
754
755         /*
756          * OK, add it to the receive buffer, or copy into external buffer if
757          * supplied
758          */
759         if (!ebuf) {
760                 if (!sl->rx_buffer.data) {
761                         status = -EIO;
762                         goto exit;
763                 }
764                 dvb_ringbuffer_pkt_write(&sl->rx_buffer, buf, bytes_read);
765         } else {
766                 memcpy(ebuf, buf, bytes_read);
767         }
768
769         dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot,
770                 buf[0], (buf[1] & 0x80) == 0, bytes_read);
771
772         /* wake up readers when a last_fragment is received */
773         if ((buf[1] & 0x80) == 0x00)
774                 wake_up_interruptible(&ca->wait_queue);
775
776         status = bytes_read;
777
778 exit:
779         return status;
780 }
781
782 /**
783  * dvb_ca_en50221_write_data - This function talks to an EN50221 CAM control
784  *                              interface. It writes a buffer of data to a CAM.
785  *
786  * @ca: CA instance.
787  * @slot: Slot to write to.
788  * @buf: The data in this buffer is treated as a complete link-level packet to
789  *       be written.
790  * @bytes_write: Size of ebuf.
791  *
792  * return: Number of bytes written, or < 0 on error.
793  */
794 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
795                                      u8 *buf, int bytes_write)
796 {
797         struct dvb_ca_slot *sl = &ca->slot_info[slot];
798         int status;
799         int i;
800
801         dprintk("%s\n", __func__);
802
803         /* sanity check */
804         if (bytes_write > sl->link_buf_size)
805                 return -EINVAL;
806
807         if (ca->pub->write_data &&
808             (sl->slot_state != DVB_CA_SLOTSTATE_LINKINIT))
809                 return ca->pub->write_data(ca->pub, slot, buf, bytes_write);
810
811         /*
812          * it is possible we are dealing with a single buffer implementation,
813          * thus if there is data available for read or if there is even a read
814          * already in progress, we do nothing but awake the kernel thread to
815          * process the data if necessary.
816          */
817         status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
818         if (status < 0)
819                 goto exitnowrite;
820         if (status & (STATUSREG_DA | STATUSREG_RE)) {
821                 if (status & STATUSREG_DA)
822                         dvb_ca_en50221_thread_wakeup(ca);
823
824                 status = -EAGAIN;
825                 goto exitnowrite;
826         }
827
828         /* OK, set HC bit */
829         status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
830                                             IRQEN | CMDREG_HC);
831         if (status)
832                 goto exit;
833
834         /* check if interface is still free */
835         status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
836         if (status < 0)
837                 goto exit;
838         if (!(status & STATUSREG_FR)) {
839                 /* it wasn't free => try again later */
840                 status = -EAGAIN;
841                 goto exit;
842         }
843
844         /*
845          * It may need some time for the CAM to settle down, or there might
846          * be a race condition between the CAM, writing HC and our last
847          * check for DA. This happens, if the CAM asserts DA, just after
848          * checking DA before we are setting HC. In this case it might be
849          * a bug in the CAM to keep the FR bit, the lower layer/HW
850          * communication requires a longer timeout or the CAM needs more
851          * time internally. But this happens in reality!
852          * We need to read the status from the HW again and do the same
853          * we did for the previous check for DA
854          */
855         status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
856         if (status < 0)
857                 goto exit;
858
859         if (status & (STATUSREG_DA | STATUSREG_RE)) {
860                 if (status & STATUSREG_DA)
861                         dvb_ca_en50221_thread_wakeup(ca);
862
863                 status = -EAGAIN;
864                 goto exit;
865         }
866
867         /* send the amount of data */
868         status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH,
869                                             bytes_write >> 8);
870         if (status)
871                 goto exit;
872         status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW,
873                                             bytes_write & 0xff);
874         if (status)
875                 goto exit;
876
877         /* send the buffer */
878         for (i = 0; i < bytes_write; i++) {
879                 status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA,
880                                                     buf[i]);
881                 if (status)
882                         goto exit;
883         }
884
885         /* check for write error (WE should now be 0) */
886         status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
887         if (status < 0)
888                 goto exit;
889         if (status & STATUSREG_WE) {
890                 sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT;
891                 status = -EIO;
892                 goto exit;
893         }
894         status = bytes_write;
895
896         dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot,
897                 buf[0], (buf[1] & 0x80) == 0, bytes_write);
898
899 exit:
900         ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
901
902 exitnowrite:
903         return status;
904 }
905
906 /* ************************************************************************** */
907 /* EN50221 higher level functions */
908
909 /**
910  * dvb_ca_en50221_slot_shutdown - A CAM has been removed => shut it down.
911  *
912  * @ca: CA instance.
913  * @slot: Slot to shut down.
914  */
915 static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot)
916 {
917         dprintk("%s\n", __func__);
918
919         ca->pub->slot_shutdown(ca->pub, slot);
920         ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
921
922         /*
923          * need to wake up all processes to check if they're now trying to
924          * write to a defunct CAM
925          */
926         wake_up_interruptible(&ca->wait_queue);
927
928         dprintk("Slot %i shutdown\n", slot);
929
930         /* success */
931         return 0;
932 }
933
934 /**
935  * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred.
936  *
937  * @pubca: CA instance.
938  * @slot: Slot concerned.
939  * @change_type: One of the DVB_CA_CAMCHANGE_* values.
940  */
941 void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot,
942                                   int change_type)
943 {
944         struct dvb_ca_private *ca = pubca->private;
945         struct dvb_ca_slot *sl = &ca->slot_info[slot];
946
947         dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
948
949         switch (change_type) {
950         case DVB_CA_EN50221_CAMCHANGE_REMOVED:
951         case DVB_CA_EN50221_CAMCHANGE_INSERTED:
952                 break;
953
954         default:
955                 return;
956         }
957
958         sl->camchange_type = change_type;
959         atomic_inc(&sl->camchange_count);
960         dvb_ca_en50221_thread_wakeup(ca);
961 }
962 EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
963
964 /**
965  * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred.
966  *
967  * @pubca: CA instance.
968  * @slot: Slot concerned.
969  */
970 void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
971 {
972         struct dvb_ca_private *ca = pubca->private;
973         struct dvb_ca_slot *sl = &ca->slot_info[slot];
974
975         dprintk("CAMREADY IRQ slot:%i\n", slot);
976
977         if (sl->slot_state == DVB_CA_SLOTSTATE_WAITREADY) {
978                 sl->slot_state = DVB_CA_SLOTSTATE_VALIDATE;
979                 dvb_ca_en50221_thread_wakeup(ca);
980         }
981 }
982 EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);
983
984 /**
985  * dvb_ca_en50221_frda_irq - An FR or DA IRQ has occurred.
986  *
987  * @pubca: CA instance.
988  * @slot: Slot concerned.
989  */
990 void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
991 {
992         struct dvb_ca_private *ca = pubca->private;
993         struct dvb_ca_slot *sl = &ca->slot_info[slot];
994         int flags;
995
996         dprintk("FR/DA IRQ slot:%i\n", slot);
997
998         switch (sl->slot_state) {
999         case DVB_CA_SLOTSTATE_LINKINIT:
1000                 flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS);
1001                 if (flags & STATUSREG_DA) {
1002                         dprintk("CAM supports DA IRQ\n");
1003                         sl->da_irq_supported = 1;
1004                 }
1005                 break;
1006
1007         case DVB_CA_SLOTSTATE_RUNNING:
1008                 if (ca->open)
1009                         dvb_ca_en50221_thread_wakeup(ca);
1010                 break;
1011         }
1012 }
1013 EXPORT_SYMBOL(dvb_ca_en50221_frda_irq);
1014
1015 /* ************************************************************************** */
1016 /* EN50221 thread functions */
1017
1018 /**
1019  * Wake up the DVB CA thread
1020  *
1021  * @ca: CA instance.
1022  */
1023 static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca)
1024 {
1025         dprintk("%s\n", __func__);
1026
1027         ca->wakeup = 1;
1028         mb();
1029         wake_up_process(ca->thread);
1030 }
1031
1032 /**
1033  * Update the delay used by the thread.
1034  *
1035  * @ca: CA instance.
1036  */
1037 static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
1038 {
1039         int delay;
1040         int curdelay = 100000000;
1041         int slot;
1042
1043         /*
1044          * Beware of too high polling frequency, because one polling
1045          * call might take several hundred milliseconds until timeout!
1046          */
1047         for (slot = 0; slot < ca->slot_count; slot++) {
1048                 struct dvb_ca_slot *sl = &ca->slot_info[slot];
1049
1050                 switch (sl->slot_state) {
1051                 default:
1052                 case DVB_CA_SLOTSTATE_NONE:
1053                         delay = HZ * 60;  /* 60s */
1054                         if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
1055                                 delay = HZ * 5;  /* 5s */
1056                         break;
1057                 case DVB_CA_SLOTSTATE_INVALID:
1058                         delay = HZ * 60;  /* 60s */
1059                         if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
1060                                 delay = HZ / 10;  /* 100ms */
1061                         break;
1062
1063                 case DVB_CA_SLOTSTATE_UNINITIALISED:
1064                 case DVB_CA_SLOTSTATE_WAITREADY:
1065                 case DVB_CA_SLOTSTATE_VALIDATE:
1066                 case DVB_CA_SLOTSTATE_WAITFR:
1067                 case DVB_CA_SLOTSTATE_LINKINIT:
1068                         delay = HZ / 10;  /* 100ms */
1069                         break;
1070
1071                 case DVB_CA_SLOTSTATE_RUNNING:
1072                         delay = HZ * 60;  /* 60s */
1073                         if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
1074                                 delay = HZ / 10;  /* 100ms */
1075                         if (ca->open) {
1076                                 if ((!sl->da_irq_supported) ||
1077                                     (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA)))
1078                                         delay = HZ / 10;  /* 100ms */
1079                         }
1080                         break;
1081                 }
1082
1083                 if (delay < curdelay)
1084                         curdelay = delay;
1085         }
1086
1087         ca->delay = curdelay;
1088 }
1089
1090 /**
1091  * Poll if the CAM is gone.
1092  *
1093  * @ca: CA instance.
1094  * @slot: Slot to process.
1095  * return:: 0 .. no change
1096  *          1 .. CAM state changed
1097  */
1098
1099 static int dvb_ca_en50221_poll_cam_gone(struct dvb_ca_private *ca, int slot)
1100 {
1101         int changed = 0;
1102         int status;
1103
1104         /*
1105          * we need this extra check for annoying interfaces like the
1106          * budget-av
1107          */
1108         if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
1109             (ca->pub->poll_slot_status)) {
1110                 status = ca->pub->poll_slot_status(ca->pub, slot, 0);
1111                 if (!(status &
1112                         DVB_CA_EN50221_POLL_CAM_PRESENT)) {
1113                         ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
1114                         dvb_ca_en50221_thread_update_delay(ca);
1115                         changed = 1;
1116                 }
1117         }
1118         return changed;
1119 }
1120
1121 /**
1122  * Thread state machine for one CA slot to perform the data transfer.
1123  *
1124  * @ca: CA instance.
1125  * @slot: Slot to process.
1126  */
1127 static void dvb_ca_en50221_thread_state_machine(struct dvb_ca_private *ca,
1128                                                 int slot)
1129 {
1130         struct dvb_ca_slot *sl = &ca->slot_info[slot];
1131         int flags;
1132         int pktcount;
1133         void *rxbuf;
1134
1135         mutex_lock(&sl->slot_lock);
1136
1137         /* check the cam status + deal with CAMCHANGEs */
1138         while (dvb_ca_en50221_check_camstatus(ca, slot)) {
1139                 /* clear down an old CI slot if necessary */
1140                 if (sl->slot_state != DVB_CA_SLOTSTATE_NONE)
1141                         dvb_ca_en50221_slot_shutdown(ca, slot);
1142
1143                 /* if a CAM is NOW present, initialise it */
1144                 if (sl->camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED)
1145                         sl->slot_state = DVB_CA_SLOTSTATE_UNINITIALISED;
1146
1147                 /* we've handled one CAMCHANGE */
1148                 dvb_ca_en50221_thread_update_delay(ca);
1149                 atomic_dec(&sl->camchange_count);
1150         }
1151
1152         /* CAM state machine */
1153         switch (sl->slot_state) {
1154         case DVB_CA_SLOTSTATE_NONE:
1155         case DVB_CA_SLOTSTATE_INVALID:
1156                 /* no action needed */
1157                 break;
1158
1159         case DVB_CA_SLOTSTATE_UNINITIALISED:
1160                 sl->slot_state = DVB_CA_SLOTSTATE_WAITREADY;
1161                 ca->pub->slot_reset(ca->pub, slot);
1162                 sl->timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
1163                 break;
1164
1165         case DVB_CA_SLOTSTATE_WAITREADY:
1166                 if (time_after(jiffies, sl->timeout)) {
1167                         pr_err("dvb_ca adaptor %d: PC card did not respond :(\n",
1168                                ca->dvbdev->adapter->num);
1169                         sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1170                         dvb_ca_en50221_thread_update_delay(ca);
1171                         break;
1172                 }
1173                 /*
1174                  * no other action needed; will automatically change state when
1175                  * ready
1176                  */
1177                 break;
1178
1179         case DVB_CA_SLOTSTATE_VALIDATE:
1180                 if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) {
1181                         if (dvb_ca_en50221_poll_cam_gone(ca, slot))
1182                                 break;
1183
1184                         pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n",
1185                                ca->dvbdev->adapter->num);
1186                         sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1187                         dvb_ca_en50221_thread_update_delay(ca);
1188                         break;
1189                 }
1190                 if (dvb_ca_en50221_set_configoption(ca, slot) != 0) {
1191                         pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n",
1192                                ca->dvbdev->adapter->num);
1193                         sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1194                         dvb_ca_en50221_thread_update_delay(ca);
1195                         break;
1196                 }
1197                 if (ca->pub->write_cam_control(ca->pub, slot,
1198                                                CTRLIF_COMMAND,
1199                                                CMDREG_RS) != 0) {
1200                         pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n",
1201                                ca->dvbdev->adapter->num);
1202                         sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1203                         dvb_ca_en50221_thread_update_delay(ca);
1204                         break;
1205                 }
1206                 dprintk("DVB CAM validated successfully\n");
1207
1208                 sl->timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
1209                 sl->slot_state = DVB_CA_SLOTSTATE_WAITFR;
1210                 ca->wakeup = 1;
1211                 break;
1212
1213         case DVB_CA_SLOTSTATE_WAITFR:
1214                 if (time_after(jiffies, sl->timeout)) {
1215                         pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n",
1216                                ca->dvbdev->adapter->num);
1217                         sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1218                         dvb_ca_en50221_thread_update_delay(ca);
1219                         break;
1220                 }
1221
1222                 flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
1223                 if (flags & STATUSREG_FR) {
1224                         sl->slot_state = DVB_CA_SLOTSTATE_LINKINIT;
1225                         ca->wakeup = 1;
1226                 }
1227                 break;
1228
1229         case DVB_CA_SLOTSTATE_LINKINIT:
1230                 if (dvb_ca_en50221_link_init(ca, slot) != 0) {
1231                         if (dvb_ca_en50221_poll_cam_gone(ca, slot))
1232                                 break;
1233
1234                         pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",
1235                                ca->dvbdev->adapter->num);
1236                         sl->slot_state = DVB_CA_SLOTSTATE_UNINITIALISED;
1237                         dvb_ca_en50221_thread_update_delay(ca);
1238                         break;
1239                 }
1240
1241                 if (!sl->rx_buffer.data) {
1242                         rxbuf = vmalloc(RX_BUFFER_SIZE);
1243                         if (!rxbuf) {
1244                                 pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n",
1245                                        ca->dvbdev->adapter->num);
1246                                 sl->slot_state = DVB_CA_SLOTSTATE_INVALID;
1247                                 dvb_ca_en50221_thread_update_delay(ca);
1248                                 break;
1249                         }
1250                         dvb_ringbuffer_init(&sl->rx_buffer, rxbuf,
1251                                             RX_BUFFER_SIZE);
1252                 }
1253
1254                 ca->pub->slot_ts_enable(ca->pub, slot);
1255                 sl->slot_state = DVB_CA_SLOTSTATE_RUNNING;
1256                 dvb_ca_en50221_thread_update_delay(ca);
1257                 pr_err("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n",
1258                        ca->dvbdev->adapter->num);
1259                 break;
1260
1261         case DVB_CA_SLOTSTATE_RUNNING:
1262                 if (!ca->open)
1263                         break;
1264
1265                 /* poll slots for data */
1266                 pktcount = 0;
1267                 while (dvb_ca_en50221_read_data(ca, slot, NULL, 0) > 0) {
1268                         if (!ca->open)
1269                                 break;
1270
1271                         /*
1272                          * if a CAMCHANGE occurred at some point, do not do any
1273                          * more processing of this slot
1274                          */
1275                         if (dvb_ca_en50221_check_camstatus(ca, slot)) {
1276                                 /*
1277                                  * we don't want to sleep on the next iteration
1278                                  * so we can handle the cam change
1279                                  */
1280                                 ca->wakeup = 1;
1281                                 break;
1282                         }
1283
1284                         /* check if we've hit our limit this time */
1285                         if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) {
1286                                 /*
1287                                  * don't sleep; there is likely to be more data
1288                                  * to read
1289                                  */
1290                                 ca->wakeup = 1;
1291                                 break;
1292                         }
1293                 }
1294                 break;
1295         }
1296
1297         mutex_unlock(&sl->slot_lock);
1298 }
1299
1300 /*
1301  * Kernel thread which monitors CA slots for CAM changes, and performs data
1302  * transfers.
1303  */
1304 static int dvb_ca_en50221_thread(void *data)
1305 {
1306         struct dvb_ca_private *ca = data;
1307         int slot;
1308
1309         dprintk("%s\n", __func__);
1310
1311         /* choose the correct initial delay */
1312         dvb_ca_en50221_thread_update_delay(ca);
1313
1314         /* main loop */
1315         while (!kthread_should_stop()) {
1316                 /* sleep for a bit */
1317                 if (!ca->wakeup) {
1318                         set_current_state(TASK_INTERRUPTIBLE);
1319                         schedule_timeout(ca->delay);
1320                         if (kthread_should_stop())
1321                                 return 0;
1322                 }
1323                 ca->wakeup = 0;
1324
1325                 /* go through all the slots processing them */
1326                 for (slot = 0; slot < ca->slot_count; slot++)
1327                         dvb_ca_en50221_thread_state_machine(ca, slot);
1328         }
1329
1330         return 0;
1331 }
1332
1333 /* ************************************************************************** */
1334 /* EN50221 IO interface functions */
1335
1336 /**
1337  * Real ioctl implementation.
1338  * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
1339  *
1340  * @file: File concerned.
1341  * @cmd: IOCTL command.
1342  * @parg: Associated argument.
1343  *
1344  * return: 0 on success, <0 on error.
1345  */
1346 static int dvb_ca_en50221_io_do_ioctl(struct file *file,
1347                                       unsigned int cmd, void *parg)
1348 {
1349         struct dvb_device *dvbdev = file->private_data;
1350         struct dvb_ca_private *ca = dvbdev->priv;
1351         int err = 0;
1352         int slot;
1353
1354         dprintk("%s\n", __func__);
1355
1356         if (mutex_lock_interruptible(&ca->ioctl_mutex))
1357                 return -ERESTARTSYS;
1358
1359         switch (cmd) {
1360         case CA_RESET:
1361                 for (slot = 0; slot < ca->slot_count; slot++) {
1362                         struct dvb_ca_slot *sl = &ca->slot_info[slot];
1363
1364                         mutex_lock(&sl->slot_lock);
1365                         if (sl->slot_state != DVB_CA_SLOTSTATE_NONE) {
1366                                 dvb_ca_en50221_slot_shutdown(ca, slot);
1367                                 if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
1368                                         dvb_ca_en50221_camchange_irq(ca->pub,
1369                                                                      slot,
1370                                                                      DVB_CA_EN50221_CAMCHANGE_INSERTED);
1371                         }
1372                         mutex_unlock(&sl->slot_lock);
1373                 }
1374                 ca->next_read_slot = 0;
1375                 dvb_ca_en50221_thread_wakeup(ca);
1376                 break;
1377
1378         case CA_GET_CAP: {
1379                 struct ca_caps *caps = parg;
1380
1381                 caps->slot_num = ca->slot_count;
1382                 caps->slot_type = CA_CI_LINK;
1383                 caps->descr_num = 0;
1384                 caps->descr_type = 0;
1385                 break;
1386         }
1387
1388         case CA_GET_SLOT_INFO: {
1389                 struct ca_slot_info *info = parg;
1390                 struct dvb_ca_slot *sl;
1391
1392                 slot = info->num;
1393                 if ((slot > ca->slot_count) || (slot < 0)) {
1394                         err = -EINVAL;
1395                         goto out_unlock;
1396                 }
1397
1398                 info->type = CA_CI_LINK;
1399                 info->flags = 0;
1400                 sl = &ca->slot_info[slot];
1401                 if ((sl->slot_state != DVB_CA_SLOTSTATE_NONE) &&
1402                     (sl->slot_state != DVB_CA_SLOTSTATE_INVALID)) {
1403                         info->flags = CA_CI_MODULE_PRESENT;
1404                 }
1405                 if (sl->slot_state == DVB_CA_SLOTSTATE_RUNNING)
1406                         info->flags |= CA_CI_MODULE_READY;
1407                 break;
1408         }
1409
1410         default:
1411                 err = -EINVAL;
1412                 break;
1413         }
1414
1415 out_unlock:
1416         mutex_unlock(&ca->ioctl_mutex);
1417         return err;
1418 }
1419
1420 /**
1421  * Wrapper for ioctl implementation.
1422  *
1423  * @file: File concerned.
1424  * @cmd: IOCTL command.
1425  * @arg: Associated argument.
1426  *
1427  * return: 0 on success, <0 on error.
1428  */
1429 static long dvb_ca_en50221_io_ioctl(struct file *file,
1430                                     unsigned int cmd, unsigned long arg)
1431 {
1432         return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl);
1433 }
1434
1435 /**
1436  * Implementation of write() syscall.
1437  *
1438  * @file: File structure.
1439  * @buf: Source buffer.
1440  * @count: Size of source buffer.
1441  * @ppos: Position in file (ignored).
1442  *
1443  * return: Number of bytes read, or <0 on error.
1444  */
1445 static ssize_t dvb_ca_en50221_io_write(struct file *file,
1446                                        const char __user *buf, size_t count,
1447                                        loff_t *ppos)
1448 {
1449         struct dvb_device *dvbdev = file->private_data;
1450         struct dvb_ca_private *ca = dvbdev->priv;
1451         struct dvb_ca_slot *sl;
1452         u8 slot, connection_id;
1453         int status;
1454         u8 fragbuf[HOST_LINK_BUF_SIZE];
1455         int fragpos = 0;
1456         int fraglen;
1457         unsigned long timeout;
1458         int written;
1459
1460         dprintk("%s\n", __func__);
1461
1462         /*
1463          * Incoming packet has a 2 byte header.
1464          * hdr[0] = slot_id, hdr[1] = connection_id
1465          */
1466         if (count < 2)
1467                 return -EINVAL;
1468
1469         /* extract slot & connection id */
1470         if (copy_from_user(&slot, buf, 1))
1471                 return -EFAULT;
1472         if (copy_from_user(&connection_id, buf + 1, 1))
1473                 return -EFAULT;
1474         buf += 2;
1475         count -= 2;
1476         sl = &ca->slot_info[slot];
1477
1478         /* check if the slot is actually running */
1479         if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING)
1480                 return -EINVAL;
1481
1482         /* fragment the packets & store in the buffer */
1483         while (fragpos < count) {
1484                 fraglen = sl->link_buf_size - 2;
1485                 if (fraglen < 0)
1486                         break;
1487                 if (fraglen > HOST_LINK_BUF_SIZE - 2)
1488                         fraglen = HOST_LINK_BUF_SIZE - 2;
1489                 if ((count - fragpos) < fraglen)
1490                         fraglen = count - fragpos;
1491
1492                 fragbuf[0] = connection_id;
1493                 fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00;
1494                 status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen);
1495                 if (status) {
1496                         status = -EFAULT;
1497                         goto exit;
1498                 }
1499
1500                 timeout = jiffies + HZ / 2;
1501                 written = 0;
1502                 while (!time_after(jiffies, timeout)) {
1503                         /*
1504                          * check the CAM hasn't been removed/reset in the
1505                          * meantime
1506                          */
1507                         if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING) {
1508                                 status = -EIO;
1509                                 goto exit;
1510                         }
1511
1512                         mutex_lock(&sl->slot_lock);
1513                         status = dvb_ca_en50221_write_data(ca, slot, fragbuf,
1514                                                            fraglen + 2);
1515                         mutex_unlock(&sl->slot_lock);
1516                         if (status == (fraglen + 2)) {
1517                                 written = 1;
1518                                 break;
1519                         }
1520                         if (status != -EAGAIN)
1521                                 goto exit;
1522
1523                         usleep_range(1000, 1100);
1524                 }
1525                 if (!written) {
1526                         status = -EIO;
1527                         goto exit;
1528                 }
1529
1530                 fragpos += fraglen;
1531         }
1532         status = count + 2;
1533
1534 exit:
1535         return status;
1536 }
1537
1538 /*
1539  * Condition for waking up in dvb_ca_en50221_io_read_condition
1540  */
1541 static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
1542                                             int *result, int *_slot)
1543 {
1544         int slot;
1545         int slot_count = 0;
1546         int idx;
1547         size_t fraglen;
1548         int connection_id = -1;
1549         int found = 0;
1550         u8 hdr[2];
1551
1552         slot = ca->next_read_slot;
1553         while ((slot_count < ca->slot_count) && (!found)) {
1554                 struct dvb_ca_slot *sl = &ca->slot_info[slot];
1555
1556                 if (sl->slot_state != DVB_CA_SLOTSTATE_RUNNING)
1557                         goto nextslot;
1558
1559                 if (!sl->rx_buffer.data)
1560                         return 0;
1561
1562                 idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, -1, &fraglen);
1563                 while (idx != -1) {
1564                         dvb_ringbuffer_pkt_read(&sl->rx_buffer, idx, 0, hdr, 2);
1565                         if (connection_id == -1)
1566                                 connection_id = hdr[0];
1567                         if ((hdr[0] == connection_id) &&
1568                             ((hdr[1] & 0x80) == 0)) {
1569                                 *_slot = slot;
1570                                 found = 1;
1571                                 break;
1572                         }
1573
1574                         idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, idx,
1575                                                       &fraglen);
1576                 }
1577
1578 nextslot:
1579                 slot = (slot + 1) % ca->slot_count;
1580                 slot_count++;
1581         }
1582
1583         ca->next_read_slot = slot;
1584         return found;
1585 }
1586
1587 /**
1588  * Implementation of read() syscall.
1589  *
1590  * @file: File structure.
1591  * @buf: Destination buffer.
1592  * @count: Size of destination buffer.
1593  * @ppos: Position in file (ignored).
1594  *
1595  * return: Number of bytes read, or <0 on error.
1596  */
1597 static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user *buf,
1598                                       size_t count, loff_t *ppos)
1599 {
1600         struct dvb_device *dvbdev = file->private_data;
1601         struct dvb_ca_private *ca = dvbdev->priv;
1602         struct dvb_ca_slot *sl;
1603         int status;
1604         int result = 0;
1605         u8 hdr[2];
1606         int slot;
1607         int connection_id = -1;
1608         size_t idx, idx2;
1609         int last_fragment = 0;
1610         size_t fraglen;
1611         int pktlen;
1612         int dispose = 0;
1613
1614         dprintk("%s\n", __func__);
1615
1616         /*
1617          * Outgoing packet has a 2 byte header.
1618          * hdr[0] = slot_id, hdr[1] = connection_id
1619          */
1620         if (count < 2)
1621                 return -EINVAL;
1622
1623         /* wait for some data */
1624         status = dvb_ca_en50221_io_read_condition(ca, &result, &slot);
1625         if (status == 0) {
1626                 /* if we're in nonblocking mode, exit immediately */
1627                 if (file->f_flags & O_NONBLOCK)
1628                         return -EWOULDBLOCK;
1629
1630                 /* wait for some data */
1631                 status = wait_event_interruptible(ca->wait_queue,
1632                                                   dvb_ca_en50221_io_read_condition
1633                                                   (ca, &result, &slot));
1634         }
1635         if ((status < 0) || (result < 0)) {
1636                 if (result)
1637                         return result;
1638                 return status;
1639         }
1640
1641         sl = &ca->slot_info[slot];
1642         idx = dvb_ringbuffer_pkt_next(&sl->rx_buffer, -1, &fraglen);
1643         pktlen = 2;
1644         do {
1645                 if (idx == -1) {
1646                         pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n",
1647                                ca->dvbdev->adapter->num);
1648                         status = -EIO;
1649                         goto exit;
1650                 }
1651
1652                 dvb_ringbuffer_pkt_read(&sl->rx_buffer, idx, 0, hdr, 2);
1653                 if (connection_id == -1)
1654                         connection_id = hdr[0];
1655                 if (hdr[0] == connection_id) {
1656                         if (pktlen < count) {
1657                                 if ((pktlen + fraglen - 2) > count)
1658                                         fraglen = count - pktlen;
1659                                 else
1660                                         fraglen -= 2;
1661
1662                                 status =
1663                                    dvb_ringbuffer_pkt_read_user(&sl->rx_buffer,
1664                                                                 idx, 2,
1665                                                                 buf + pktlen,
1666                                                                 fraglen);
1667                                 if (status < 0)
1668                                         goto exit;
1669
1670                                 pktlen += fraglen;
1671                         }
1672
1673                         if ((hdr[1] & 0x80) == 0)
1674                                 last_fragment = 1;
1675                         dispose = 1;
1676                 }
1677
1678                 idx2 = dvb_ringbuffer_pkt_next(&sl->rx_buffer, idx, &fraglen);
1679                 if (dispose)
1680                         dvb_ringbuffer_pkt_dispose(&sl->rx_buffer, idx);
1681                 idx = idx2;
1682                 dispose = 0;
1683         } while (!last_fragment);
1684
1685         hdr[0] = slot;
1686         hdr[1] = connection_id;
1687         status = copy_to_user(buf, hdr, 2);
1688         if (status) {
1689                 status = -EFAULT;
1690                 goto exit;
1691         }
1692         status = pktlen;
1693
1694 exit:
1695         return status;
1696 }
1697
1698 /**
1699  * Implementation of file open syscall.
1700  *
1701  * @inode: Inode concerned.
1702  * @file: File concerned.
1703  *
1704  * return: 0 on success, <0 on failure.
1705  */
1706 static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
1707 {
1708         struct dvb_device *dvbdev = file->private_data;
1709         struct dvb_ca_private *ca = dvbdev->priv;
1710         int err;
1711         int i;
1712
1713         dprintk("%s\n", __func__);
1714
1715         if (!try_module_get(ca->pub->owner))
1716                 return -EIO;
1717
1718         err = dvb_generic_open(inode, file);
1719         if (err < 0) {
1720                 module_put(ca->pub->owner);
1721                 return err;
1722         }
1723
1724         for (i = 0; i < ca->slot_count; i++) {
1725                 struct dvb_ca_slot *sl = &ca->slot_info[i];
1726
1727                 if (sl->slot_state == DVB_CA_SLOTSTATE_RUNNING) {
1728                         if (!sl->rx_buffer.data) {
1729                                 /*
1730                                  * it is safe to call this here without locks
1731                                  * because ca->open == 0. Data is not read in
1732                                  * this case
1733                                  */
1734                                 dvb_ringbuffer_flush(&sl->rx_buffer);
1735                         }
1736                 }
1737         }
1738
1739         ca->open = 1;
1740         dvb_ca_en50221_thread_update_delay(ca);
1741         dvb_ca_en50221_thread_wakeup(ca);
1742
1743         dvb_ca_private_get(ca);
1744
1745         return 0;
1746 }
1747
1748 /**
1749  * Implementation of file close syscall.
1750  *
1751  * @inode: Inode concerned.
1752  * @file: File concerned.
1753  *
1754  * return: 0 on success, <0 on failure.
1755  */
1756 static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
1757 {
1758         struct dvb_device *dvbdev = file->private_data;
1759         struct dvb_ca_private *ca = dvbdev->priv;
1760         int err;
1761
1762         dprintk("%s\n", __func__);
1763
1764         /* mark the CA device as closed */
1765         ca->open = 0;
1766         dvb_ca_en50221_thread_update_delay(ca);
1767
1768         err = dvb_generic_release(inode, file);
1769
1770         module_put(ca->pub->owner);
1771
1772         dvb_ca_private_put(ca);
1773
1774         return err;
1775 }
1776
1777 /**
1778  * Implementation of poll() syscall.
1779  *
1780  * @file: File concerned.
1781  * @wait: poll wait table.
1782  *
1783  * return: Standard poll mask.
1784  */
1785 static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table *wait)
1786 {
1787         struct dvb_device *dvbdev = file->private_data;
1788         struct dvb_ca_private *ca = dvbdev->priv;
1789         unsigned int mask = 0;
1790         int slot;
1791         int result = 0;
1792
1793         dprintk("%s\n", __func__);
1794
1795         if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1)
1796                 mask |= POLLIN;
1797
1798         /* if there is something, return now */
1799         if (mask)
1800                 return mask;
1801
1802         /* wait for something to happen */
1803         poll_wait(file, &ca->wait_queue, wait);
1804
1805         if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1)
1806                 mask |= POLLIN;
1807
1808         return mask;
1809 }
1810
1811 static const struct file_operations dvb_ca_fops = {
1812         .owner = THIS_MODULE,
1813         .read = dvb_ca_en50221_io_read,
1814         .write = dvb_ca_en50221_io_write,
1815         .unlocked_ioctl = dvb_ca_en50221_io_ioctl,
1816         .open = dvb_ca_en50221_io_open,
1817         .release = dvb_ca_en50221_io_release,
1818         .poll = dvb_ca_en50221_io_poll,
1819         .llseek = noop_llseek,
1820 };
1821
1822 static const struct dvb_device dvbdev_ca = {
1823         .priv = NULL,
1824         .users = 1,
1825         .readers = 1,
1826         .writers = 1,
1827 #if defined(CONFIG_MEDIA_CONTROLLER_DVB)
1828         .name = "dvb-ca-en50221",
1829 #endif
1830         .fops = &dvb_ca_fops,
1831 };
1832
1833 /* ************************************************************************** */
1834 /* Initialisation/shutdown functions */
1835
1836 /**
1837  * Initialise a new DVB CA EN50221 interface device.
1838  *
1839  * @dvb_adapter: DVB adapter to attach the new CA device to.
1840  * @pubca: The dvb_ca instance.
1841  * @flags: Flags describing the CA device (DVB_CA_FLAG_*).
1842  * @slot_count: Number of slots supported.
1843  *
1844  * return: 0 on success, nonzero on failure
1845  */
1846 int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
1847                         struct dvb_ca_en50221 *pubca, int flags, int slot_count)
1848 {
1849         int ret;
1850         struct dvb_ca_private *ca = NULL;
1851         int i;
1852
1853         dprintk("%s\n", __func__);
1854
1855         if (slot_count < 1)
1856                 return -EINVAL;
1857
1858         /* initialise the system data */
1859         ca = kzalloc(sizeof(*ca), GFP_KERNEL);
1860         if (!ca) {
1861                 ret = -ENOMEM;
1862                 goto exit;
1863         }
1864         kref_init(&ca->refcount);
1865         ca->pub = pubca;
1866         ca->flags = flags;
1867         ca->slot_count = slot_count;
1868         ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot),
1869                                 GFP_KERNEL);
1870         if (!ca->slot_info) {
1871                 ret = -ENOMEM;
1872                 goto free_ca;
1873         }
1874         init_waitqueue_head(&ca->wait_queue);
1875         ca->open = 0;
1876         ca->wakeup = 0;
1877         ca->next_read_slot = 0;
1878         pubca->private = ca;
1879
1880         /* register the DVB device */
1881         ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca,
1882                                   DVB_DEVICE_CA, 0);
1883         if (ret)
1884                 goto free_slot_info;
1885
1886         /* now initialise each slot */
1887         for (i = 0; i < slot_count; i++) {
1888                 struct dvb_ca_slot *sl = &ca->slot_info[i];
1889
1890                 memset(sl, 0, sizeof(struct dvb_ca_slot));
1891                 sl->slot_state = DVB_CA_SLOTSTATE_NONE;
1892                 atomic_set(&sl->camchange_count, 0);
1893                 sl->camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
1894                 mutex_init(&sl->slot_lock);
1895         }
1896
1897         mutex_init(&ca->ioctl_mutex);
1898
1899         if (signal_pending(current)) {
1900                 ret = -EINTR;
1901                 goto unregister_device;
1902         }
1903         mb();
1904
1905         /* create a kthread for monitoring this CA device */
1906         ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
1907                                  ca->dvbdev->adapter->num, ca->dvbdev->id);
1908         if (IS_ERR(ca->thread)) {
1909                 ret = PTR_ERR(ca->thread);
1910                 pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n",
1911                        ret);
1912                 goto unregister_device;
1913         }
1914         return 0;
1915
1916 unregister_device:
1917         dvb_unregister_device(ca->dvbdev);
1918 free_slot_info:
1919         kfree(ca->slot_info);
1920 free_ca:
1921         kfree(ca);
1922 exit:
1923         pubca->private = NULL;
1924         return ret;
1925 }
1926 EXPORT_SYMBOL(dvb_ca_en50221_init);
1927
1928 /**
1929  * Release a DVB CA EN50221 interface device.
1930  *
1931  * @pubca: The associated dvb_ca instance.
1932  */
1933 void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
1934 {
1935         struct dvb_ca_private *ca = pubca->private;
1936         int i;
1937
1938         dprintk("%s\n", __func__);
1939
1940         /* shutdown the thread if there was one */
1941         kthread_stop(ca->thread);
1942
1943         for (i = 0; i < ca->slot_count; i++)
1944                 dvb_ca_en50221_slot_shutdown(ca, i);
1945
1946         dvb_remove_device(ca->dvbdev);
1947         dvb_ca_private_put(ca);
1948         pubca->private = NULL;
1949 }
1950 EXPORT_SYMBOL(dvb_ca_en50221_release);