Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[sfrench/cifs-2.6.git] / drivers / leds / leds-lp5523.c
1 /*
2  * lp5523.c - LP5523, LP55231 LED Driver
3  *
4  * Copyright (C) 2010 Nokia Corporation
5  * Copyright (C) 2012 Texas Instruments
6  *
7  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
8  *          Milo(Woogyom) Kim <milo.kim@ti.com>
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * version 2 as published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22  * 02110-1301 USA
23  */
24
25 #include <linux/delay.h>
26 #include <linux/firmware.h>
27 #include <linux/i2c.h>
28 #include <linux/leds.h>
29 #include <linux/module.h>
30 #include <linux/mutex.h>
31 #include <linux/of.h>
32 #include <linux/platform_data/leds-lp55xx.h>
33 #include <linux/slab.h>
34
35 #include "leds-lp55xx-common.h"
36
37 #define LP5523_PROGRAM_LENGTH           32      /* bytes */
38 /* Memory is used like this:
39    0x00 engine 1 program
40    0x10 engine 2 program
41    0x20 engine 3 program
42    0x30 engine 1 muxing info
43    0x40 engine 2 muxing info
44    0x50 engine 3 muxing info
45 */
46 #define LP5523_MAX_LEDS                 9
47
48 /* Registers */
49 #define LP5523_REG_ENABLE               0x00
50 #define LP5523_REG_OP_MODE              0x01
51 #define LP5523_REG_ENABLE_LEDS_MSB      0x04
52 #define LP5523_REG_ENABLE_LEDS_LSB      0x05
53 #define LP5523_REG_LED_CTRL_BASE        0x06
54 #define LP5523_REG_LED_PWM_BASE         0x16
55 #define LP5523_REG_LED_CURRENT_BASE     0x26
56 #define LP5523_REG_CONFIG               0x36
57 #define LP5523_REG_STATUS               0x3A
58 #define LP5523_REG_RESET                0x3D
59 #define LP5523_REG_LED_TEST_CTRL        0x41
60 #define LP5523_REG_LED_TEST_ADC         0x42
61 #define LP5523_REG_MASTER_FADER_BASE    0x48
62 #define LP5523_REG_CH1_PROG_START       0x4C
63 #define LP5523_REG_CH2_PROG_START       0x4D
64 #define LP5523_REG_CH3_PROG_START       0x4E
65 #define LP5523_REG_PROG_PAGE_SEL        0x4F
66 #define LP5523_REG_PROG_MEM             0x50
67
68 /* Bit description in registers */
69 #define LP5523_ENABLE                   0x40
70 #define LP5523_AUTO_INC                 0x40
71 #define LP5523_PWR_SAVE                 0x20
72 #define LP5523_PWM_PWR_SAVE             0x04
73 #define LP5523_CP_AUTO                  0x18
74 #define LP5523_AUTO_CLK                 0x02
75
76 #define LP5523_EN_LEDTEST               0x80
77 #define LP5523_LEDTEST_DONE             0x80
78 #define LP5523_RESET                    0xFF
79 #define LP5523_ADC_SHORTCIRC_LIM        80
80 #define LP5523_EXT_CLK_USED             0x08
81 #define LP5523_ENG_STATUS_MASK          0x07
82
83 #define LP5523_FADER_MAPPING_MASK       0xC0
84 #define LP5523_FADER_MAPPING_SHIFT      6
85
86 /* Memory Page Selection */
87 #define LP5523_PAGE_ENG1                0
88 #define LP5523_PAGE_ENG2                1
89 #define LP5523_PAGE_ENG3                2
90 #define LP5523_PAGE_MUX1                3
91 #define LP5523_PAGE_MUX2                4
92 #define LP5523_PAGE_MUX3                5
93
94 /* Program Memory Operations */
95 #define LP5523_MODE_ENG1_M              0x30    /* Operation Mode Register */
96 #define LP5523_MODE_ENG2_M              0x0C
97 #define LP5523_MODE_ENG3_M              0x03
98 #define LP5523_LOAD_ENG1                0x10
99 #define LP5523_LOAD_ENG2                0x04
100 #define LP5523_LOAD_ENG3                0x01
101
102 #define LP5523_ENG1_IS_LOADING(mode)    \
103         ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
104 #define LP5523_ENG2_IS_LOADING(mode)    \
105         ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
106 #define LP5523_ENG3_IS_LOADING(mode)    \
107         ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
108
109 #define LP5523_EXEC_ENG1_M              0x30    /* Enable Register */
110 #define LP5523_EXEC_ENG2_M              0x0C
111 #define LP5523_EXEC_ENG3_M              0x03
112 #define LP5523_EXEC_M                   0x3F
113 #define LP5523_RUN_ENG1                 0x20
114 #define LP5523_RUN_ENG2                 0x08
115 #define LP5523_RUN_ENG3                 0x02
116
117 #define LED_ACTIVE(mux, led)            (!!(mux & (0x0001 << led)))
118
119 enum lp5523_chip_id {
120         LP5523,
121         LP55231,
122 };
123
124 static int lp5523_init_program_engine(struct lp55xx_chip *chip);
125
126 static inline void lp5523_wait_opmode_done(void)
127 {
128         usleep_range(1000, 2000);
129 }
130
131 static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
132 {
133         led->led_current = led_current;
134         lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
135                 led_current);
136 }
137
138 static int lp5523_post_init_device(struct lp55xx_chip *chip)
139 {
140         int ret;
141
142         ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
143         if (ret)
144                 return ret;
145
146         /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
147         usleep_range(1000, 2000);
148
149         ret = lp55xx_write(chip, LP5523_REG_CONFIG,
150                             LP5523_AUTO_INC | LP5523_PWR_SAVE |
151                             LP5523_CP_AUTO | LP5523_AUTO_CLK |
152                             LP5523_PWM_PWR_SAVE);
153         if (ret)
154                 return ret;
155
156         /* turn on all leds */
157         ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
158         if (ret)
159                 return ret;
160
161         ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
162         if (ret)
163                 return ret;
164
165         return lp5523_init_program_engine(chip);
166 }
167
168 static void lp5523_load_engine(struct lp55xx_chip *chip)
169 {
170         enum lp55xx_engine_index idx = chip->engine_idx;
171         static const u8 mask[] = {
172                 [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
173                 [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
174                 [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
175         };
176
177         static const u8 val[] = {
178                 [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
179                 [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
180                 [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
181         };
182
183         lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
184
185         lp5523_wait_opmode_done();
186 }
187
188 static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
189 {
190         enum lp55xx_engine_index idx = chip->engine_idx;
191         static const u8 page_sel[] = {
192                 [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
193                 [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
194                 [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
195         };
196
197         lp5523_load_engine(chip);
198
199         lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
200 }
201
202 static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
203 {
204         lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
205         lp5523_wait_opmode_done();
206 }
207
208 static void lp5523_stop_engine(struct lp55xx_chip *chip)
209 {
210         enum lp55xx_engine_index idx = chip->engine_idx;
211         static const u8 mask[] = {
212                 [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
213                 [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
214                 [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
215         };
216
217         lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0);
218
219         lp5523_wait_opmode_done();
220 }
221
222 static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
223 {
224         int i;
225
226         for (i = 0; i < LP5523_MAX_LEDS; i++)
227                 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
228 }
229
230 static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
231 {
232         int ret;
233         u8 mode;
234         u8 exec;
235
236         /* stop engine */
237         if (!start) {
238                 lp5523_stop_engine(chip);
239                 lp5523_turn_off_channels(chip);
240                 return;
241         }
242
243         /*
244          * To run the engine,
245          * operation mode and enable register should updated at the same time
246          */
247
248         ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
249         if (ret)
250                 return;
251
252         ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
253         if (ret)
254                 return;
255
256         /* change operation mode to RUN only when each engine is loading */
257         if (LP5523_ENG1_IS_LOADING(mode)) {
258                 mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
259                 exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
260         }
261
262         if (LP5523_ENG2_IS_LOADING(mode)) {
263                 mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
264                 exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
265         }
266
267         if (LP5523_ENG3_IS_LOADING(mode)) {
268                 mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
269                 exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
270         }
271
272         lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
273         lp5523_wait_opmode_done();
274
275         lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
276 }
277
278 static int lp5523_init_program_engine(struct lp55xx_chip *chip)
279 {
280         int i;
281         int j;
282         int ret;
283         u8 status;
284         /* one pattern per engine setting LED MUX start and stop addresses */
285         static const u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
286                 { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
287                 { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
288                 { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
289         };
290
291         /* hardcode 32 bytes of memory for each engine from program memory */
292         ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
293         if (ret)
294                 return ret;
295
296         ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
297         if (ret)
298                 return ret;
299
300         ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
301         if (ret)
302                 return ret;
303
304         /* write LED MUX address space for each engine */
305         for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
306                 chip->engine_idx = i;
307                 lp5523_load_engine_and_select_page(chip);
308
309                 for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
310                         ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
311                                         pattern[i - 1][j]);
312                         if (ret)
313                                 goto out;
314                 }
315         }
316
317         lp5523_run_engine(chip, true);
318
319         /* Let the programs run for couple of ms and check the engine status */
320         usleep_range(3000, 6000);
321         ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
322         if (ret)
323                 return ret;
324         status &= LP5523_ENG_STATUS_MASK;
325
326         if (status != LP5523_ENG_STATUS_MASK) {
327                 dev_err(&chip->cl->dev,
328                         "could not configure LED engine, status = 0x%.2x\n",
329                         status);
330                 ret = -1;
331         }
332
333 out:
334         lp5523_stop_all_engines(chip);
335         return ret;
336 }
337
338 static int lp5523_update_program_memory(struct lp55xx_chip *chip,
339                                         const u8 *data, size_t size)
340 {
341         u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
342         unsigned cmd;
343         char c[3];
344         int nrchars;
345         int ret;
346         int offset = 0;
347         int i = 0;
348
349         while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
350                 /* separate sscanfs because length is working only for %s */
351                 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
352                 if (ret != 1)
353                         goto err;
354
355                 ret = sscanf(c, "%2x", &cmd);
356                 if (ret != 1)
357                         goto err;
358
359                 pattern[i] = (u8)cmd;
360                 offset += nrchars;
361                 i++;
362         }
363
364         /* Each instruction is 16bit long. Check that length is even */
365         if (i % 2)
366                 goto err;
367
368         for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
369                 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
370                 if (ret)
371                         return -EINVAL;
372         }
373
374         return size;
375
376 err:
377         dev_err(&chip->cl->dev, "wrong pattern format\n");
378         return -EINVAL;
379 }
380
381 static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
382 {
383         const struct firmware *fw = chip->fw;
384
385         if (fw->size > LP5523_PROGRAM_LENGTH) {
386                 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
387                         fw->size);
388                 return;
389         }
390
391         /*
392          * Program memory sequence
393          *  1) set engine mode to "LOAD"
394          *  2) write firmware data into program memory
395          */
396
397         lp5523_load_engine_and_select_page(chip);
398         lp5523_update_program_memory(chip, fw->data, fw->size);
399 }
400
401 static ssize_t show_engine_mode(struct device *dev,
402                                 struct device_attribute *attr,
403                                 char *buf, int nr)
404 {
405         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
406         struct lp55xx_chip *chip = led->chip;
407         enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
408
409         switch (mode) {
410         case LP55XX_ENGINE_RUN:
411                 return sprintf(buf, "run\n");
412         case LP55XX_ENGINE_LOAD:
413                 return sprintf(buf, "load\n");
414         case LP55XX_ENGINE_DISABLED:
415         default:
416                 return sprintf(buf, "disabled\n");
417         }
418 }
419 show_mode(1)
420 show_mode(2)
421 show_mode(3)
422
423 static ssize_t store_engine_mode(struct device *dev,
424                                  struct device_attribute *attr,
425                                  const char *buf, size_t len, int nr)
426 {
427         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
428         struct lp55xx_chip *chip = led->chip;
429         struct lp55xx_engine *engine = &chip->engines[nr - 1];
430
431         mutex_lock(&chip->lock);
432
433         chip->engine_idx = nr;
434
435         if (!strncmp(buf, "run", 3)) {
436                 lp5523_run_engine(chip, true);
437                 engine->mode = LP55XX_ENGINE_RUN;
438         } else if (!strncmp(buf, "load", 4)) {
439                 lp5523_stop_engine(chip);
440                 lp5523_load_engine(chip);
441                 engine->mode = LP55XX_ENGINE_LOAD;
442         } else if (!strncmp(buf, "disabled", 8)) {
443                 lp5523_stop_engine(chip);
444                 engine->mode = LP55XX_ENGINE_DISABLED;
445         }
446
447         mutex_unlock(&chip->lock);
448
449         return len;
450 }
451 store_mode(1)
452 store_mode(2)
453 store_mode(3)
454
455 static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
456 {
457         u16 tmp_mux = 0;
458         int i;
459
460         len = min_t(int, len, LP5523_MAX_LEDS);
461
462         for (i = 0; i < len; i++) {
463                 switch (buf[i]) {
464                 case '1':
465                         tmp_mux |= (1 << i);
466                         break;
467                 case '0':
468                         break;
469                 case '\n':
470                         i = len;
471                         break;
472                 default:
473                         return -1;
474                 }
475         }
476         *mux = tmp_mux;
477
478         return 0;
479 }
480
481 static void lp5523_mux_to_array(u16 led_mux, char *array)
482 {
483         int i, pos = 0;
484         for (i = 0; i < LP5523_MAX_LEDS; i++)
485                 pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
486
487         array[pos] = '\0';
488 }
489
490 static ssize_t show_engine_leds(struct device *dev,
491                             struct device_attribute *attr,
492                             char *buf, int nr)
493 {
494         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
495         struct lp55xx_chip *chip = led->chip;
496         char mux[LP5523_MAX_LEDS + 1];
497
498         lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
499
500         return sprintf(buf, "%s\n", mux);
501 }
502 show_leds(1)
503 show_leds(2)
504 show_leds(3)
505
506 static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
507 {
508         struct lp55xx_engine *engine = &chip->engines[nr - 1];
509         int ret;
510         static const u8 mux_page[] = {
511                 [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
512                 [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
513                 [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
514         };
515
516         lp5523_load_engine(chip);
517
518         ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
519         if (ret)
520                 return ret;
521
522         ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
523         if (ret)
524                 return ret;
525
526         ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
527         if (ret)
528                 return ret;
529
530         engine->led_mux = mux;
531         return 0;
532 }
533
534 static ssize_t store_engine_leds(struct device *dev,
535                              struct device_attribute *attr,
536                              const char *buf, size_t len, int nr)
537 {
538         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
539         struct lp55xx_chip *chip = led->chip;
540         struct lp55xx_engine *engine = &chip->engines[nr - 1];
541         u16 mux = 0;
542         ssize_t ret;
543
544         if (lp5523_mux_parse(buf, &mux, len))
545                 return -EINVAL;
546
547         mutex_lock(&chip->lock);
548
549         chip->engine_idx = nr;
550         ret = -EINVAL;
551
552         if (engine->mode != LP55XX_ENGINE_LOAD)
553                 goto leave;
554
555         if (lp5523_load_mux(chip, mux, nr))
556                 goto leave;
557
558         ret = len;
559 leave:
560         mutex_unlock(&chip->lock);
561         return ret;
562 }
563 store_leds(1)
564 store_leds(2)
565 store_leds(3)
566
567 static ssize_t store_engine_load(struct device *dev,
568                              struct device_attribute *attr,
569                              const char *buf, size_t len, int nr)
570 {
571         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
572         struct lp55xx_chip *chip = led->chip;
573         int ret;
574
575         mutex_lock(&chip->lock);
576
577         chip->engine_idx = nr;
578         lp5523_load_engine_and_select_page(chip);
579         ret = lp5523_update_program_memory(chip, buf, len);
580
581         mutex_unlock(&chip->lock);
582
583         return ret;
584 }
585 store_load(1)
586 store_load(2)
587 store_load(3)
588
589 static ssize_t lp5523_selftest(struct device *dev,
590                                struct device_attribute *attr,
591                                char *buf)
592 {
593         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
594         struct lp55xx_chip *chip = led->chip;
595         struct lp55xx_platform_data *pdata = chip->pdata;
596         int i, ret, pos = 0;
597         u8 status, adc, vdd;
598
599         mutex_lock(&chip->lock);
600
601         ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
602         if (ret < 0)
603                 goto fail;
604
605         /* Check that ext clock is really in use if requested */
606         if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
607                 if  ((status & LP5523_EXT_CLK_USED) == 0)
608                         goto fail;
609         }
610
611         /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
612         lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
613         usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
614         ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
615         if (ret < 0)
616                 goto fail;
617
618         if (!(status & LP5523_LEDTEST_DONE))
619                 usleep_range(3000, 6000); /* Was not ready. Wait little bit */
620
621         ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
622         if (ret < 0)
623                 goto fail;
624
625         vdd--;  /* There may be some fluctuation in measurement */
626
627         for (i = 0; i < LP5523_MAX_LEDS; i++) {
628                 /* Skip non-existing channels */
629                 if (pdata->led_config[i].led_current == 0)
630                         continue;
631
632                 /* Set default current */
633                 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
634                         pdata->led_config[i].led_current);
635
636                 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
637                 /* let current stabilize 2 - 4ms before measurements start */
638                 usleep_range(2000, 4000);
639                 lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
640                              LP5523_EN_LEDTEST | i);
641                 /* ADC conversion time is 2.7 ms typically */
642                 usleep_range(3000, 6000);
643                 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
644                 if (ret < 0)
645                         goto fail;
646
647                 if (!(status & LP5523_LEDTEST_DONE))
648                         usleep_range(3000, 6000);/* Was not ready. Wait. */
649
650                 ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
651                 if (ret < 0)
652                         goto fail;
653
654                 if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
655                         pos += sprintf(buf + pos, "LED %d FAIL\n", i);
656
657                 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
658
659                 /* Restore current */
660                 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
661                         led->led_current);
662                 led++;
663         }
664         if (pos == 0)
665                 pos = sprintf(buf, "OK\n");
666         goto release_lock;
667 fail:
668         pos = sprintf(buf, "FAIL\n");
669
670 release_lock:
671         mutex_unlock(&chip->lock);
672
673         return pos;
674 }
675
676 #define show_fader(nr)                                          \
677 static ssize_t show_master_fader##nr(struct device *dev,        \
678                             struct device_attribute *attr,      \
679                             char *buf)                          \
680 {                                                               \
681         return show_master_fader(dev, attr, buf, nr);           \
682 }
683
684 #define store_fader(nr)                                         \
685 static ssize_t store_master_fader##nr(struct device *dev,       \
686                              struct device_attribute *attr,     \
687                              const char *buf, size_t len)       \
688 {                                                               \
689         return store_master_fader(dev, attr, buf, len, nr);     \
690 }
691
692 static ssize_t show_master_fader(struct device *dev,
693                                  struct device_attribute *attr,
694                                  char *buf, int nr)
695 {
696         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
697         struct lp55xx_chip *chip = led->chip;
698         int ret;
699         u8 val;
700
701         mutex_lock(&chip->lock);
702         ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val);
703         mutex_unlock(&chip->lock);
704
705         if (ret == 0)
706                 ret = sprintf(buf, "%u\n", val);
707
708         return ret;
709 }
710 show_fader(1)
711 show_fader(2)
712 show_fader(3)
713
714 static ssize_t store_master_fader(struct device *dev,
715                                   struct device_attribute *attr,
716                                   const char *buf, size_t len, int nr)
717 {
718         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
719         struct lp55xx_chip *chip = led->chip;
720         int ret;
721         unsigned long val;
722
723         if (kstrtoul(buf, 0, &val))
724                 return -EINVAL;
725
726         if (val > 0xff)
727                 return -EINVAL;
728
729         mutex_lock(&chip->lock);
730         ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1,
731                            (u8)val);
732         mutex_unlock(&chip->lock);
733
734         if (ret == 0)
735                 ret = len;
736
737         return ret;
738 }
739 store_fader(1)
740 store_fader(2)
741 store_fader(3)
742
743 static ssize_t show_master_fader_leds(struct device *dev,
744                                       struct device_attribute *attr,
745                                       char *buf)
746 {
747         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
748         struct lp55xx_chip *chip = led->chip;
749         int i, ret, pos = 0;
750         u8 val;
751
752         mutex_lock(&chip->lock);
753
754         for (i = 0; i < LP5523_MAX_LEDS; i++) {
755                 ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val);
756                 if (ret)
757                         goto leave;
758
759                 val = (val & LP5523_FADER_MAPPING_MASK)
760                         >> LP5523_FADER_MAPPING_SHIFT;
761                 if (val > 3) {
762                         ret = -EINVAL;
763                         goto leave;
764                 }
765                 buf[pos++] = val + '0';
766         }
767         buf[pos++] = '\n';
768         ret = pos;
769 leave:
770         mutex_unlock(&chip->lock);
771         return ret;
772 }
773
774 static ssize_t store_master_fader_leds(struct device *dev,
775                                        struct device_attribute *attr,
776                                        const char *buf, size_t len)
777 {
778         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
779         struct lp55xx_chip *chip = led->chip;
780         int i, n, ret;
781         u8 val;
782
783         n = min_t(int, len, LP5523_MAX_LEDS);
784
785         mutex_lock(&chip->lock);
786
787         for (i = 0; i < n; i++) {
788                 if (buf[i] >= '0' && buf[i] <= '3') {
789                         val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT;
790                         ret = lp55xx_update_bits(chip,
791                                                  LP5523_REG_LED_CTRL_BASE + i,
792                                                  LP5523_FADER_MAPPING_MASK,
793                                                  val);
794                         if (ret)
795                                 goto leave;
796                 } else {
797                         ret = -EINVAL;
798                         goto leave;
799                 }
800         }
801         ret = len;
802 leave:
803         mutex_unlock(&chip->lock);
804         return ret;
805 }
806
807 static int lp5523_led_brightness(struct lp55xx_led *led)
808 {
809         struct lp55xx_chip *chip = led->chip;
810         int ret;
811
812         mutex_lock(&chip->lock);
813         ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
814                      led->brightness);
815         mutex_unlock(&chip->lock);
816         return ret;
817 }
818
819 static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
820 static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
821 static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
822 static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
823 static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
824 static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
825 static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
826 static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
827 static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
828 static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
829 static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1,
830                           store_master_fader1);
831 static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2,
832                           store_master_fader2);
833 static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3,
834                           store_master_fader3);
835 static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds,
836                           store_master_fader_leds);
837
838 static struct attribute *lp5523_attributes[] = {
839         &dev_attr_engine1_mode.attr,
840         &dev_attr_engine2_mode.attr,
841         &dev_attr_engine3_mode.attr,
842         &dev_attr_engine1_load.attr,
843         &dev_attr_engine2_load.attr,
844         &dev_attr_engine3_load.attr,
845         &dev_attr_engine1_leds.attr,
846         &dev_attr_engine2_leds.attr,
847         &dev_attr_engine3_leds.attr,
848         &dev_attr_selftest.attr,
849         &dev_attr_master_fader1.attr,
850         &dev_attr_master_fader2.attr,
851         &dev_attr_master_fader3.attr,
852         &dev_attr_master_fader_leds.attr,
853         NULL,
854 };
855
856 static const struct attribute_group lp5523_group = {
857         .attrs = lp5523_attributes,
858 };
859
860 /* Chip specific configurations */
861 static struct lp55xx_device_config lp5523_cfg = {
862         .reset = {
863                 .addr = LP5523_REG_RESET,
864                 .val  = LP5523_RESET,
865         },
866         .enable = {
867                 .addr = LP5523_REG_ENABLE,
868                 .val  = LP5523_ENABLE,
869         },
870         .max_channel  = LP5523_MAX_LEDS,
871         .post_init_device   = lp5523_post_init_device,
872         .brightness_fn      = lp5523_led_brightness,
873         .set_led_current    = lp5523_set_led_current,
874         .firmware_cb        = lp5523_firmware_loaded,
875         .run_engine         = lp5523_run_engine,
876         .dev_attr_group     = &lp5523_group,
877 };
878
879 static int lp5523_probe(struct i2c_client *client,
880                         const struct i2c_device_id *id)
881 {
882         int ret;
883         struct lp55xx_chip *chip;
884         struct lp55xx_led *led;
885         struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
886         struct device_node *np = client->dev.of_node;
887
888         if (!pdata) {
889                 if (np) {
890                         pdata = lp55xx_of_populate_pdata(&client->dev, np);
891                         if (IS_ERR(pdata))
892                                 return PTR_ERR(pdata);
893                 } else {
894                         dev_err(&client->dev, "no platform data\n");
895                         return -EINVAL;
896                 }
897         }
898
899         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
900         if (!chip)
901                 return -ENOMEM;
902
903         led = devm_kcalloc(&client->dev,
904                         pdata->num_channels, sizeof(*led), GFP_KERNEL);
905         if (!led)
906                 return -ENOMEM;
907
908         chip->cl = client;
909         chip->pdata = pdata;
910         chip->cfg = &lp5523_cfg;
911
912         mutex_init(&chip->lock);
913
914         i2c_set_clientdata(client, led);
915
916         ret = lp55xx_init_device(chip);
917         if (ret)
918                 goto err_init;
919
920         dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
921
922         ret = lp55xx_register_leds(led, chip);
923         if (ret)
924                 goto err_register_leds;
925
926         ret = lp55xx_register_sysfs(chip);
927         if (ret) {
928                 dev_err(&client->dev, "registering sysfs failed\n");
929                 goto err_register_sysfs;
930         }
931
932         return 0;
933
934 err_register_sysfs:
935         lp55xx_unregister_leds(led, chip);
936 err_register_leds:
937         lp55xx_deinit_device(chip);
938 err_init:
939         return ret;
940 }
941
942 static int lp5523_remove(struct i2c_client *client)
943 {
944         struct lp55xx_led *led = i2c_get_clientdata(client);
945         struct lp55xx_chip *chip = led->chip;
946
947         lp5523_stop_all_engines(chip);
948         lp55xx_unregister_sysfs(chip);
949         lp55xx_unregister_leds(led, chip);
950         lp55xx_deinit_device(chip);
951
952         return 0;
953 }
954
955 static const struct i2c_device_id lp5523_id[] = {
956         { "lp5523",  LP5523 },
957         { "lp55231", LP55231 },
958         { }
959 };
960
961 MODULE_DEVICE_TABLE(i2c, lp5523_id);
962
963 #ifdef CONFIG_OF
964 static const struct of_device_id of_lp5523_leds_match[] = {
965         { .compatible = "national,lp5523", },
966         { .compatible = "ti,lp55231", },
967         {},
968 };
969
970 MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
971 #endif
972
973 static struct i2c_driver lp5523_driver = {
974         .driver = {
975                 .name   = "lp5523x",
976                 .of_match_table = of_match_ptr(of_lp5523_leds_match),
977         },
978         .probe          = lp5523_probe,
979         .remove         = lp5523_remove,
980         .id_table       = lp5523_id,
981 };
982
983 module_i2c_driver(lp5523_driver);
984
985 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
986 MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
987 MODULE_DESCRIPTION("LP5523 LED engine");
988 MODULE_LICENSE("GPL");