drivers/isdn/hardware/mISDN/hfcmulti.c

   1 /*
   2  * hfcmulti.c  low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
   3  *
   4  * Author       Andreas Eversberg (jolly@eversberg.eu)
   5  * ported to mqueue mechanism:
   6  *              Peter Sprenger (sprengermoving-bytes.de)
   7  *
   8  * inspired by existing hfc-pci driver:
   9  * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
  10  * Copyright 2008  by Karsten Keil (kkeil@suse.de)
  11  * Copyright 2008  by Andreas Eversberg (jolly@eversberg.eu)
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2, or (at your option)
  16  * any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *
  28  * Thanks to Cologne Chip AG for this great controller!
  29  */
  30
  31 /*
  32  * module parameters:
  33  * type:
  34  *      By default (0), the card is automatically detected.
  35  *      Or use the following combinations:
  36  *      Bit 0-7   = 0x00001 = HFC-E1 (1 port)
  37  * or   Bit 0-7   = 0x00004 = HFC-4S (4 ports)
  38  * or   Bit 0-7   = 0x00008 = HFC-8S (8 ports)
  39  *      Bit 8     = 0x00100 = uLaw (instead of aLaw)
  40  *      Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
  41  *      Bit 10    = spare
  42  *      Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
  43  * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
  44  *      Bit 13    = spare
  45  *      Bit 14    = 0x04000 = Use external ram (128K)
  46  *      Bit 15    = 0x08000 = Use external ram (512K)
  47  *      Bit 16    = 0x10000 = Use 64 timeslots instead of 32
  48  * or   Bit 17    = 0x20000 = Use 128 timeslots instead of anything else
  49  *      Bit 18    = spare
  50  *      Bit 19    = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
  51  * (all other bits are reserved and shall be 0)
  52  *      example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
  53  *               bus (PCM master)
  54  *
  55  * port: (optional or required for all ports on all installed cards)
  56  *      HFC-4S/HFC-8S only bits:
  57  *      Bit 0     = 0x001 = Use master clock for this S/T interface
  58  *                          (ony once per chip).
  59  *      Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
  60  *                          Don't use this unless you know what you are doing!
  61  *      Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
  62  *      example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
  63  *               received from port 1
  64  *
  65  *      HFC-E1 only bits:
  66  *      Bit 0     = 0x0001 = interface: 0=copper, 1=optical
  67  *      Bit 1     = 0x0002 = reserved (later for 32 B-channels transparent mode)
  68  *      Bit 2     = 0x0004 = Report LOS
  69  *      Bit 3     = 0x0008 = Report AIS
  70  *      Bit 4     = 0x0010 = Report SLIP
  71  *      Bit 5     = 0x0020 = Report RDI
  72  *      Bit 8     = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
  73  *                           mode instead.
  74  *      Bit 9     = 0x0200 = Force get clock from interface, even in NT mode.
  75  * or   Bit 10    = 0x0400 = Force put clock to interface, even in TE mode.
  76  *      Bit 11    = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
  77  *                           (E1 only)
  78  *      Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
  79  *                           for default.
  80  * (all other bits are reserved and shall be 0)
  81  *
  82  * debug:
  83  *      NOTE: only one debug value must be given for all cards
  84  *      enable debugging (see hfc_multi.h for debug options)
  85  *
  86  * poll:
  87  *      NOTE: only one poll value must be given for all cards
  88  *      Give the number of samples for each fifo process.
  89  *      By default 128 is used. Decrease to reduce delay, increase to
  90  *      reduce cpu load. If unsure, don't mess with it!
  91  *      Valid is 8, 16, 32, 64, 128, 256.
  92  *
  93  * pcm:
  94  *      NOTE: only one pcm value must be given for every card.
  95  *      The PCM bus id tells the mISDNdsp module about the connected PCM bus.
  96  *      By default (0), the PCM bus id is 100 for the card that is PCM master.
  97  *      If multiple cards are PCM master (because they are not interconnected),
  98  *      each card with PCM master will have increasing PCM id.
  99  *      All PCM busses with the same ID are expected to be connected and have
 100  *      common time slots slots.
 101  *      Only one chip of the PCM bus must be master, the others slave.
 102  *      -1 means no support of PCM bus not even.
 103  *      Omit this value, if all cards are interconnected or none is connected.
 104  *      If unsure, don't give this parameter.
 105  *
 106  * dslot:
 107  *      NOTE: only one dslot value must be given for every card.
 108  *      Also this value must be given for non-E1 cards. If omitted, the E1
 109  *      card has D-channel on time slot 16, which is default.
 110  *      If 1..15 or 17..31, an alternate time slot is used for D-channel.
 111  *      In this case, the application must be able to handle this.
 112  *      If -1 is given, the D-channel is disabled and all 31 slots can be used
 113  *      for B-channel. (only for specific applications)
 114  *      If you don't know how to use it, you don't need it!
 115  *
 116  * iomode:
 117  *      NOTE: only one mode value must be given for every card.
 118  *      -> See hfc_multi.h for HFC_IO_MODE_* values
 119  *      By default, the IO mode is pci memory IO (MEMIO).
 120  *      Some cards requre specific IO mode, so it cannot be changed.
 121  *      It may be usefull to set IO mode to register io (REGIO) to solve
 122  *      PCI bridge problems.
 123  *      If unsure, don't give this parameter.
 124  *
 125  * clockdelay_nt:
 126  *      NOTE: only one clockdelay_nt value must be given once for all cards.
 127  *      Give the value of the clock control register (A_ST_CLK_DLY)
 128  *      of the S/T interfaces in NT mode.
 129  *      This register is needed for the TBR3 certification, so don't change it.
 130  *
 131  * clockdelay_te:
 132  *      NOTE: only one clockdelay_te value must be given once
 133  *      Give the value of the clock control register (A_ST_CLK_DLY)
 134  *      of the S/T interfaces in TE mode.
 135  *      This register is needed for the TBR3 certification, so don't change it.
 136  *
 137  * clock:
 138  *      NOTE: only one clock value must be given once
 139  *      Selects interface with clock source for mISDN and applications.
 140  *      Set to card number starting with 1. Set to -1 to disable.
 141  *      By default, the first card is used as clock source.
 142  *
 143  * hwid:
 144  *      NOTE: only one hwid value must be given once
 145  *      Enable special embedded devices with XHFC controllers.
 146  */
 147
 148 /*
 149  * debug register access (never use this, it will flood your system log)
 150  * #define HFC_REGISTER_DEBUG
 151  */
 152
 153 #define HFC_MULTI_VERSION       "2.03"
 154
 155 #include <linux/module.h>
 156 #include <linux/pci.h>
 157 #include <linux/delay.h>
 158 #include <linux/mISDNhw.h>
 159 #include <linux/mISDNdsp.h>
 160
 161 /*
 162 #define IRQCOUNT_DEBUG
 163 #define IRQ_DEBUG
 164 */
 165
 166 #include "hfc_multi.h"
 167 #ifdef ECHOPREP
 168 #include "gaintab.h"
 169 #endif
 170
 171 #define MAX_CARDS       8
 172 #define MAX_PORTS       (8 * MAX_CARDS)
 173
 174 static LIST_HEAD(HFClist);
 175 static spinlock_t HFClock; /* global hfc list lock */
 176
 177 static void ph_state_change(struct dchannel *);
 178
 179 static struct hfc_multi *syncmaster;
 180 static int plxsd_master; /* if we have a master card (yet) */
 181 static spinlock_t plx_lock; /* may not acquire other lock inside */
 182
 183 #define TYP_E1          1
 184 #define TYP_4S          4
 185 #define TYP_8S          8
 186
 187 static int poll_timer = 6;      /* default = 128 samples = 16ms */
 188 /* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
 189 static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30  };
 190 #define CLKDEL_TE       0x0f    /* CLKDEL in TE mode */
 191 #define CLKDEL_NT       0x6c    /* CLKDEL in NT mode
 192                                    (0x60 MUST be included!) */
 193
 194 #define DIP_4S  0x1             /* DIP Switches for Beronet 1S/2S/4S cards */
 195 #define DIP_8S  0x2             /* DIP Switches for Beronet 8S+ cards */
 196 #define DIP_E1  0x3             /* DIP Switches for Beronet E1 cards */
 197
 198 /*
 199  * module stuff
 200  */
 201
 202 static uint     type[MAX_CARDS];
 203 static int      pcm[MAX_CARDS];
 204 static int      dslot[MAX_CARDS];
 205 static uint     iomode[MAX_CARDS];
 206 static uint     port[MAX_PORTS];
 207 static uint     debug;
 208 static uint     poll;
 209 static int      clock;
 210 static uint     timer;
 211 static uint     clockdelay_te = CLKDEL_TE;
 212 static uint     clockdelay_nt = CLKDEL_NT;
 213 #define HWID_NONE       0
 214 #define HWID_MINIP4     1
 215 #define HWID_MINIP8     2
 216 #define HWID_MINIP16    3
 217 static uint     hwid = HWID_NONE;
 218
 219 static int      HFC_cnt, Port_cnt, PCM_cnt = 99;
 220
 221 MODULE_AUTHOR("Andreas Eversberg");
 222 MODULE_LICENSE("GPL");
 223 MODULE_VERSION(HFC_MULTI_VERSION);
 224 module_param(debug, uint, S_IRUGO | S_IWUSR);
 225 module_param(poll, uint, S_IRUGO | S_IWUSR);
 226 module_param(clock, int, S_IRUGO | S_IWUSR);
 227 module_param(timer, uint, S_IRUGO | S_IWUSR);
 228 module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
 229 module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
 230 module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
 231 module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
 232 module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
 233 module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
 234 module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
 235 module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */
 236
 237 #ifdef HFC_REGISTER_DEBUG
 238 #define HFC_outb(hc, reg, val) \
 239         (hc->HFC_outb(hc, reg, val, __func__, __LINE__))
 240 #define HFC_outb_nodebug(hc, reg, val) \
 241         (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
 242 #define HFC_inb(hc, reg) \
 243         (hc->HFC_inb(hc, reg, __func__, __LINE__))
 244 #define HFC_inb_nodebug(hc, reg) \
 245         (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
 246 #define HFC_inw(hc, reg) \
 247         (hc->HFC_inw(hc, reg, __func__, __LINE__))
 248 #define HFC_inw_nodebug(hc, reg) \
 249         (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
 250 #define HFC_wait(hc) \
 251         (hc->HFC_wait(hc, __func__, __LINE__))
 252 #define HFC_wait_nodebug(hc) \
 253         (hc->HFC_wait_nodebug(hc, __func__, __LINE__))
 254 #else
 255 #define HFC_outb(hc, reg, val)          (hc->HFC_outb(hc, reg, val))
 256 #define HFC_outb_nodebug(hc, reg, val)  (hc->HFC_outb_nodebug(hc, reg, val))
 257 #define HFC_inb(hc, reg)                (hc->HFC_inb(hc, reg))
 258 #define HFC_inb_nodebug(hc, reg)        (hc->HFC_inb_nodebug(hc, reg))
 259 #define HFC_inw(hc, reg)                (hc->HFC_inw(hc, reg))
 260 #define HFC_inw_nodebug(hc, reg)        (hc->HFC_inw_nodebug(hc, reg))
 261 #define HFC_wait(hc)                    (hc->HFC_wait(hc))
 262 #define HFC_wait_nodebug(hc)            (hc->HFC_wait_nodebug(hc))
 263 #endif
 264
 265 #ifdef CONFIG_MISDN_HFCMULTI_8xx
 266 #include "hfc_multi_8xx.h"
 267 #endif
 268
 269 /* HFC_IO_MODE_PCIMEM */
 270 static void
 271 #ifdef HFC_REGISTER_DEBUG
 272 HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
 273                 const char *function, int line)
 274 #else
 275 HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
 276 #endif
 277 {
 278         writeb(val, hc->pci_membase + reg);
 279 }
 280 static u_char
 281 #ifdef HFC_REGISTER_DEBUG
 282 HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 283 #else
 284 HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
 285 #endif
 286 {
 287         return readb(hc->pci_membase + reg);
 288 }
 289 static u_short
 290 #ifdef HFC_REGISTER_DEBUG
 291 HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 292 #else
 293 HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
 294 #endif
 295 {
 296         return readw(hc->pci_membase + reg);
 297 }
 298 static void
 299 #ifdef HFC_REGISTER_DEBUG
 300 HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
 301 #else
 302 HFC_wait_pcimem(struct hfc_multi *hc)
 303 #endif
 304 {
 305         while (readb(hc->pci_membase + R_STATUS) & V_BUSY)
 306                 cpu_relax();
 307 }
 308
 309 /* HFC_IO_MODE_REGIO */
 310 static void
 311 #ifdef HFC_REGISTER_DEBUG
 312 HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
 313         const char *function, int line)
 314 #else
 315 HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
 316 #endif
 317 {
 318         outb(reg, hc->pci_iobase + 4);
 319         outb(val, hc->pci_iobase);
 320 }
 321 static u_char
 322 #ifdef HFC_REGISTER_DEBUG
 323 HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 324 #else
 325 HFC_inb_regio(struct hfc_multi *hc, u_char reg)
 326 #endif
 327 {
 328         outb(reg, hc->pci_iobase + 4);
 329         return inb(hc->pci_iobase);
 330 }
 331 static u_short
 332 #ifdef HFC_REGISTER_DEBUG
 333 HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 334 #else
 335 HFC_inw_regio(struct hfc_multi *hc, u_char reg)
 336 #endif
 337 {
 338         outb(reg, hc->pci_iobase + 4);
 339         return inw(hc->pci_iobase);
 340 }
 341 static void
 342 #ifdef HFC_REGISTER_DEBUG
 343 HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
 344 #else
 345 HFC_wait_regio(struct hfc_multi *hc)
 346 #endif
 347 {
 348         outb(R_STATUS, hc->pci_iobase + 4);
 349         while (inb(hc->pci_iobase) & V_BUSY)
 350                 cpu_relax();
 351 }
 352
 353 #ifdef HFC_REGISTER_DEBUG
 354 static void
 355 HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
 356                 const char *function, int line)
 357 {
 358         char regname[256] = "", bits[9] = "xxxxxxxx";
 359         int i;
 360
 361         i = -1;
 362         while (hfc_register_names[++i].name) {
 363                 if (hfc_register_names[i].reg == reg)
 364                         strcat(regname, hfc_register_names[i].name);
 365         }
 366         if (regname[0] == '\0')
 367                 strcpy(regname, "register");
 368
 369         bits[7] = '0' + (!!(val & 1));
 370         bits[6] = '0' + (!!(val & 2));
 371         bits[5] = '0' + (!!(val & 4));
 372         bits[4] = '0' + (!!(val & 8));
 373         bits[3] = '0' + (!!(val & 16));
 374         bits[2] = '0' + (!!(val & 32));
 375         bits[1] = '0' + (!!(val & 64));
 376         bits[0] = '0' + (!!(val & 128));
 377         printk(KERN_DEBUG
 378             "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
 379             hc->id, reg, regname, val, bits, function, line);
 380         HFC_outb_nodebug(hc, reg, val);
 381 }
 382 static u_char
 383 HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
 384 {
 385         char regname[256] = "", bits[9] = "xxxxxxxx";
 386         u_char val = HFC_inb_nodebug(hc, reg);
 387         int i;
 388
 389         i = 0;
 390         while (hfc_register_names[i++].name)
 391                 ;
 392         while (hfc_register_names[++i].name) {
 393                 if (hfc_register_names[i].reg == reg)
 394                         strcat(regname, hfc_register_names[i].name);
 395         }
 396         if (regname[0] == '\0')
 397                 strcpy(regname, "register");
 398
 399         bits[7] = '0' + (!!(val & 1));
 400         bits[6] = '0' + (!!(val & 2));
 401         bits[5] = '0' + (!!(val & 4));
 402         bits[4] = '0' + (!!(val & 8));
 403         bits[3] = '0' + (!!(val & 16));
 404         bits[2] = '0' + (!!(val & 32));
 405         bits[1] = '0' + (!!(val & 64));
 406         bits[0] = '0' + (!!(val & 128));
 407         printk(KERN_DEBUG
 408             "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
 409             hc->id, reg, regname, val, bits, function, line);
 410         return val;
 411 }
 412 static u_short
 413 HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
 414 {
 415         char regname[256] = "";
 416         u_short val = HFC_inw_nodebug(hc, reg);
 417         int i;
 418
 419         i = 0;
 420         while (hfc_register_names[i++].name)
 421                 ;
 422         while (hfc_register_names[++i].name) {
 423                 if (hfc_register_names[i].reg == reg)
 424                         strcat(regname, hfc_register_names[i].name);
 425         }
 426         if (regname[0] == '\0')
 427                 strcpy(regname, "register");
 428
 429         printk(KERN_DEBUG
 430             "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
 431             hc->id, reg, regname, val, function, line);
 432         return val;
 433 }
 434 static void
 435 HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
 436 {
 437         printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
 438             hc->id, function, line);
 439         HFC_wait_nodebug(hc);
 440 }
 441 #endif
 442
 443 /* write fifo data (REGIO) */
 444 static void
 445 write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
 446 {
 447         outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
 448         while (len>>2) {
 449                 outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase);
 450                 data += 4;
 451                 len -= 4;
 452         }
 453         while (len>>1) {
 454                 outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase);
 455                 data += 2;
 456                 len -= 2;
 457         }
 458         while (len) {
 459                 outb(*data, hc->pci_iobase);
 460                 data++;
 461                 len--;
 462         }
 463 }
 464 /* write fifo data (PCIMEM) */
 465 static void
 466 write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 467 {
 468         while (len>>2) {
 469                 writel(cpu_to_le32(*(u32 *)data),
 470                         hc->pci_membase + A_FIFO_DATA0);
 471                 data += 4;
 472                 len -= 4;
 473         }
 474         while (len>>1) {
 475                 writew(cpu_to_le16(*(u16 *)data),
 476                         hc->pci_membase + A_FIFO_DATA0);
 477                 data += 2;
 478                 len -= 2;
 479         }
 480         while (len) {
 481                 writeb(*data, hc->pci_membase + A_FIFO_DATA0);
 482                 data++;
 483                 len--;
 484         }
 485 }
 486
 487 /* read fifo data (REGIO) */
 488 static void
 489 read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
 490 {
 491         outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
 492         while (len>>2) {
 493                 *(u32 *)data = le32_to_cpu(inl(hc->pci_iobase));
 494                 data += 4;
 495                 len -= 4;
 496         }
 497         while (len>>1) {
 498                 *(u16 *)data = le16_to_cpu(inw(hc->pci_iobase));
 499                 data += 2;
 500                 len -= 2;
 501         }
 502         while (len) {
 503                 *data = inb(hc->pci_iobase);
 504                 data++;
 505                 len--;
 506         }
 507 }
 508
 509 /* read fifo data (PCIMEM) */
 510 static void
 511 read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 512 {
 513         while (len>>2) {
 514                 *(u32 *)data =
 515                         le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0));
 516                 data += 4;
 517                 len -= 4;
 518         }
 519         while (len>>1) {
 520                 *(u16 *)data =
 521                         le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0));
 522                 data += 2;
 523                 len -= 2;
 524         }
 525         while (len) {
 526                 *data = readb(hc->pci_membase + A_FIFO_DATA0);
 527                 data++;
 528                 len--;
 529         }
 530 }
 531
 532 static void
 533 enable_hwirq(struct hfc_multi *hc)
 534 {
 535         hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
 536         HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
 537 }
 538
 539 static void
 540 disable_hwirq(struct hfc_multi *hc)
 541 {
 542         hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
 543         HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
 544 }
 545
 546 #define NUM_EC 2
 547 #define MAX_TDM_CHAN 32
 548
 549
 550 inline void
 551 enablepcibridge(struct hfc_multi *c)
 552 {
 553         HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
 554 }
 555
 556 inline void
 557 disablepcibridge(struct hfc_multi *c)
 558 {
 559         HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
 560 }
 561
 562 inline unsigned char
 563 readpcibridge(struct hfc_multi *hc, unsigned char address)
 564 {
 565         unsigned short cipv;
 566         unsigned char data;
 567
 568         if (!hc->pci_iobase)
 569                 return 0;
 570
 571         /* slow down a PCI read access by 1 PCI clock cycle */
 572         HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
 573
 574         if (address == 0)
 575                 cipv = 0x4000;
 576         else
 577                 cipv = 0x5800;
 578
 579         /* select local bridge port address by writing to CIP port */
 580         /* data = HFC_inb(c, cipv); * was _io before */
 581         outw(cipv, hc->pci_iobase + 4);
 582         data = inb(hc->pci_iobase);
 583
 584         /* restore R_CTRL for normal PCI read cycle speed */
 585         HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
 586
 587         return data;
 588 }
 589
 590 inline void
 591 writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
 592 {
 593         unsigned short cipv;
 594         unsigned int datav;
 595
 596         if (!hc->pci_iobase)
 597                 return;
 598
 599         if (address == 0)
 600                 cipv = 0x4000;
 601         else
 602                 cipv = 0x5800;
 603
 604         /* select local bridge port address by writing to CIP port */
 605         outw(cipv, hc->pci_iobase + 4);
 606         /* define a 32 bit dword with 4 identical bytes for write sequence */
 607         datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
 608             ((__u32) data << 24);
 609
 610         /*
 611          * write this 32 bit dword to the bridge data port
 612          * this will initiate a write sequence of up to 4 writes to the same
 613          * address on the local bus interface the number of write accesses
 614          * is undefined but >=1 and depends on the next PCI transaction
 615          * during write sequence on the local bus
 616          */
 617         outl(datav, hc->pci_iobase);
 618 }
 619
 620 inline void
 621 cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
 622 {
 623         /* Do data pin read low byte */
 624         HFC_outb(hc, R_GPIO_OUT1, reg);
 625 }
 626
 627 inline void
 628 cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
 629 {
 630         cpld_set_reg(hc, reg);
 631
 632         enablepcibridge(hc);
 633         writepcibridge(hc, 1, val);
 634         disablepcibridge(hc);
 635
 636         return;
 637 }
 638
 639 inline unsigned char
 640 cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
 641 {
 642         unsigned char bytein;
 643
 644         cpld_set_reg(hc, reg);
 645
 646         /* Do data pin read low byte */
 647         HFC_outb(hc, R_GPIO_OUT1, reg);
 648
 649         enablepcibridge(hc);
 650         bytein = readpcibridge(hc, 1);
 651         disablepcibridge(hc);
 652
 653         return bytein;
 654 }
 655
 656 inline void
 657 vpm_write_address(struct hfc_multi *hc, unsigned short addr)
 658 {
 659         cpld_write_reg(hc, 0, 0xff & addr);
 660         cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
 661 }
 662
 663 inline unsigned short
 664 vpm_read_address(struct hfc_multi *c)
 665 {
 666         unsigned short addr;
 667         unsigned short highbit;
 668
 669         addr = cpld_read_reg(c, 0);
 670         highbit = cpld_read_reg(c, 1);
 671
 672         addr = addr | (highbit << 8);
 673
 674         return addr & 0x1ff;
 675 }
 676
 677 inline unsigned char
 678 vpm_in(struct hfc_multi *c, int which, unsigned short addr)
 679 {
 680         unsigned char res;
 681
 682         vpm_write_address(c, addr);
 683
 684         if (!which)
 685                 cpld_set_reg(c, 2);
 686         else
 687                 cpld_set_reg(c, 3);
 688
 689         enablepcibridge(c);
 690         res = readpcibridge(c, 1);
 691         disablepcibridge(c);
 692
 693         cpld_set_reg(c, 0);
 694
 695         return res;
 696 }
 697
 698 inline void
 699 vpm_out(struct hfc_multi *c, int which, unsigned short addr,
 700     unsigned char data)
 701 {
 702         vpm_write_address(c, addr);
 703
 704         enablepcibridge(c);
 705
 706         if (!which)
 707                 cpld_set_reg(c, 2);
 708         else
 709                 cpld_set_reg(c, 3);
 710
 711         writepcibridge(c, 1, data);
 712
 713         cpld_set_reg(c, 0);
 714
 715         disablepcibridge(c);
 716
 717         {
 718         unsigned char regin;
 719         regin = vpm_in(c, which, addr);
 720         if (regin != data)
 721                 printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
 722                         "0x%x\n", data, addr, regin);
 723         }
 724
 725 }
 726
 727
 728 static void
 729 vpm_init(struct hfc_multi *wc)
 730 {
 731         unsigned char reg;
 732         unsigned int mask;
 733         unsigned int i, x, y;
 734         unsigned int ver;
 735
 736         for (x = 0; x < NUM_EC; x++) {
 737                 /* Setup GPIO's */
 738                 if (!x) {
 739                         ver = vpm_in(wc, x, 0x1a0);
 740                         printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
 741                 }
 742
 743                 for (y = 0; y < 4; y++) {
 744                         vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
 745                         vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
 746                         vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
 747                 }
 748
 749                 /* Setup TDM path - sets fsync and tdm_clk as inputs */
 750                 reg = vpm_in(wc, x, 0x1a3); /* misc_con */
 751                 vpm_out(wc, x, 0x1a3, reg & ~2);
 752
 753                 /* Setup Echo length (256 taps) */
 754                 vpm_out(wc, x, 0x022, 1);
 755                 vpm_out(wc, x, 0x023, 0xff);
 756
 757                 /* Setup timeslots */
 758                 vpm_out(wc, x, 0x02f, 0x00);
 759                 mask = 0x02020202 << (x * 4);
 760
 761                 /* Setup the tdm channel masks for all chips */
 762                 for (i = 0; i < 4; i++)
 763                         vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
 764
 765                 /* Setup convergence rate */
 766                 printk(KERN_DEBUG "VPM: A-law mode\n");
 767                 reg = 0x00 | 0x10 | 0x01;
 768                 vpm_out(wc, x, 0x20, reg);
 769                 printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
 770                 /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
 771
 772                 vpm_out(wc, x, 0x24, 0x02);
 773                 reg = vpm_in(wc, x, 0x24);
 774                 printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
 775
 776                 /* Initialize echo cans */
 777                 for (i = 0; i < MAX_TDM_CHAN; i++) {
 778                         if (mask & (0x00000001 << i))
 779                                 vpm_out(wc, x, i, 0x00);
 780                 }
 781
 782                 /*
 783                  * ARM arch at least disallows a udelay of
 784                  * more than 2ms... it gives a fake "__bad_udelay"
 785                  * reference at link-time.
 786                  * long delays in kernel code are pretty sucky anyway
 787                  * for now work around it using 5 x 2ms instead of 1 x 10ms
 788                  */
 789
 790                 udelay(2000);
 791                 udelay(2000);
 792                 udelay(2000);
 793                 udelay(2000);
 794                 udelay(2000);
 795
 796                 /* Put in bypass mode */
 797                 for (i = 0; i < MAX_TDM_CHAN; i++) {
 798                         if (mask & (0x00000001 << i))
 799                                 vpm_out(wc, x, i, 0x01);
 800                 }
 801
 802                 /* Enable bypass */
 803                 for (i = 0; i < MAX_TDM_CHAN; i++) {
 804                         if (mask & (0x00000001 << i))
 805                                 vpm_out(wc, x, 0x78 + i, 0x01);
 806                 }
 807
 808         }
 809 }
 810
 811 #ifdef UNUSED
 812 static void
 813 vpm_check(struct hfc_multi *hctmp)
 814 {
 815         unsigned char gpi2;
 816
 817         gpi2 = HFC_inb(hctmp, R_GPI_IN2);
 818
 819         if ((gpi2 & 0x3) != 0x3)
 820                 printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
 821 }
 822 #endif /* UNUSED */
 823
 824
 825 /*
 826  * Interface to enable/disable the HW Echocan
 827  *
 828  * these functions are called within a spin_lock_irqsave on
 829  * the channel instance lock, so we are not disturbed by irqs
 830  *
 831  * we can later easily change the interface to make  other
 832  * things configurable, for now we configure the taps
 833  *
 834  */
 835
 836 static void
 837 vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
 838 {
 839         unsigned int timeslot;
 840         unsigned int unit;
 841         struct bchannel *bch = hc->chan[ch].bch;
 842 #ifdef TXADJ
 843         int txadj = -4;
 844         struct sk_buff *skb;
 845 #endif
 846         if (hc->chan[ch].protocol != ISDN_P_B_RAW)
 847                 return;
 848
 849         if (!bch)
 850                 return;
 851
 852 #ifdef TXADJ
 853         skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
 854                 sizeof(int), &txadj, GFP_ATOMIC);
 855         if (skb)
 856                 recv_Bchannel_skb(bch, skb);
 857 #endif
 858
 859         timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
 860         unit = ch % 4;
 861
 862         printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
 863             taps, timeslot);
 864
 865         vpm_out(hc, unit, timeslot, 0x7e);
 866 }
 867
 868 static void
 869 vpm_echocan_off(struct hfc_multi *hc, int ch)
 870 {
 871         unsigned int timeslot;
 872         unsigned int unit;
 873         struct bchannel *bch = hc->chan[ch].bch;
 874 #ifdef TXADJ
 875         int txadj = 0;
 876         struct sk_buff *skb;
 877 #endif
 878
 879         if (hc->chan[ch].protocol != ISDN_P_B_RAW)
 880                 return;
 881
 882         if (!bch)
 883                 return;
 884
 885 #ifdef TXADJ
 886         skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
 887                 sizeof(int), &txadj, GFP_ATOMIC);
 888         if (skb)
 889                 recv_Bchannel_skb(bch, skb);
 890 #endif
 891
 892         timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
 893         unit = ch % 4;
 894
 895         printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
 896             timeslot);
 897         /* FILLME */
 898         vpm_out(hc, unit, timeslot, 0x01);
 899 }
 900
 901
 902 /*
 903  * Speech Design resync feature
 904  * NOTE: This is called sometimes outside interrupt handler.
 905  * We must lock irqsave, so no other interrupt (other card) will occurr!
 906  * Also multiple interrupts may nest, so must lock each access (lists, card)!
 907  */
 908 static inline void
 909 hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 910 {
 911         struct hfc_multi *hc, *next, *pcmmaster = NULL;
 912         void __iomem *plx_acc_32;
 913         u_int pv;
 914         u_long flags;
 915
 916         spin_lock_irqsave(&HFClock, flags);
 917         spin_lock(&plx_lock); /* must be locked inside other locks */
 918
 919         if (debug & DEBUG_HFCMULTI_PLXSD)
 920                 printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
 921                         __func__, syncmaster);
 922
 923         /* select new master */
 924         if (newmaster) {
 925                 if (debug & DEBUG_HFCMULTI_PLXSD)
 926                         printk(KERN_DEBUG "using provided controller\n");
 927         } else {
 928                 list_for_each_entry_safe(hc, next, &HFClist, list) {
 929                         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 930                                 if (hc->syncronized) {
 931                                         newmaster = hc;
 932                                         break;
 933                                 }
 934                         }
 935                 }
 936         }
 937
 938         /* Disable sync of all cards */
 939         list_for_each_entry_safe(hc, next, &HFClist, list) {
 940                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 941                         plx_acc_32 = hc->plx_membase + PLX_GPIOC;
 942                         pv = readl(plx_acc_32);
 943                         pv &= ~PLX_SYNC_O_EN;
 944                         writel(pv, plx_acc_32);
 945                         if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
 946                                 pcmmaster = hc;
 947                                 if (hc->ctype == HFC_TYPE_E1) {
 948                                         if (debug & DEBUG_HFCMULTI_PLXSD)
 949                                                 printk(KERN_DEBUG
 950                                                         "Schedule SYNC_I\n");
 951                                         hc->e1_resync |= 1; /* get SYNC_I */
 952                                 }
 953                         }
 954                 }
 955         }
 956
 957         if (newmaster) {
 958                 hc = newmaster;
 959                 if (debug & DEBUG_HFCMULTI_PLXSD)
 960                         printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
 961                                 "interface.\n", hc->id, hc);
 962                 /* Enable new sync master */
 963                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
 964                 pv = readl(plx_acc_32);
 965                 pv |= PLX_SYNC_O_EN;
 966                 writel(pv, plx_acc_32);
 967                 /* switch to jatt PLL, if not disabled by RX_SYNC */
 968                 if (hc->ctype == HFC_TYPE_E1
 969                                 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
 970                         if (debug & DEBUG_HFCMULTI_PLXSD)
 971                                 printk(KERN_DEBUG "Schedule jatt PLL\n");
 972                         hc->e1_resync |= 2; /* switch to jatt */
 973                 }
 974         } else {
 975                 if (pcmmaster) {
 976                         hc = pcmmaster;
 977                         if (debug & DEBUG_HFCMULTI_PLXSD)
 978                                 printk(KERN_DEBUG
 979                                         "id=%d (0x%p) = PCM master syncronized "
 980                                         "with QUARTZ\n", hc->id, hc);
 981                         if (hc->ctype == HFC_TYPE_E1) {
 982                                 /* Use the crystal clock for the PCM
 983                                    master card */
 984                                 if (debug & DEBUG_HFCMULTI_PLXSD)
 985                                         printk(KERN_DEBUG
 986                                             "Schedule QUARTZ for HFC-E1\n");
 987                                 hc->e1_resync |= 4; /* switch quartz */
 988                         } else {
 989                                 if (debug & DEBUG_HFCMULTI_PLXSD)
 990                                         printk(KERN_DEBUG
 991                                             "QUARTZ is automatically "
 992                                             "enabled by HFC-%dS\n", hc->ctype);
 993                         }
 994                         plx_acc_32 = hc->plx_membase + PLX_GPIOC;
 995                         pv = readl(plx_acc_32);
 996                         pv |= PLX_SYNC_O_EN;
 997                         writel(pv, plx_acc_32);
 998                 } else
 999                         if (!rm)
1000                                 printk(KERN_ERR "%s no pcm master, this MUST "
1001                                         "not happen!\n", __func__);
1002         }
1003         syncmaster = newmaster;
1004
1005         spin_unlock(&plx_lock);
1006         spin_unlock_irqrestore(&HFClock, flags);
1007 }
1008
1009 /* This must be called AND hc must be locked irqsave!!! */
1010 inline void
1011 plxsd_checksync(struct hfc_multi *hc, int rm)
1012 {
1013         if (hc->syncronized) {
1014                 if (syncmaster == NULL) {
1015                         if (debug & DEBUG_HFCMULTI_PLXSD)
1016                                 printk(KERN_DEBUG "%s: GOT sync on card %d"
1017                                         " (id=%d)\n", __func__, hc->id + 1,
1018                                         hc->id);
1019                         hfcmulti_resync(hc, hc, rm);
1020                 }
1021         } else {
1022                 if (syncmaster == hc) {
1023                         if (debug & DEBUG_HFCMULTI_PLXSD)
1024                                 printk(KERN_DEBUG "%s: LOST sync on card %d"
1025                                         " (id=%d)\n", __func__, hc->id + 1,
1026                                         hc->id);
1027                         hfcmulti_resync(hc, NULL, rm);
1028                 }
1029         }
1030 }
1031
1032
1033 /*
1034  * free hardware resources used by driver
1035  */
1036 static void
1037 release_io_hfcmulti(struct hfc_multi *hc)
1038 {
1039         void __iomem *plx_acc_32;
1040         u_int   pv;
1041         u_long  plx_flags;
1042
1043         if (debug & DEBUG_HFCMULTI_INIT)
1044                 printk(KERN_DEBUG "%s: entered\n", __func__);
1045
1046         /* soft reset also masks all interrupts */
1047         hc->hw.r_cirm |= V_SRES;
1048         HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1049         udelay(1000);
1050         hc->hw.r_cirm &= ~V_SRES;
1051         HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1052         udelay(1000); /* instead of 'wait' that may cause locking */
1053
1054         /* release Speech Design card, if PLX was initialized */
1055         if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
1056                 if (debug & DEBUG_HFCMULTI_PLXSD)
1057                         printk(KERN_DEBUG "%s: release PLXSD card %d\n",
1058                             __func__, hc->id + 1);
1059                 spin_lock_irqsave(&plx_lock, plx_flags);
1060                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
1061                 writel(PLX_GPIOC_INIT, plx_acc_32);
1062                 pv = readl(plx_acc_32);
1063                 /* Termination off */
1064                 pv &= ~PLX_TERM_ON;
1065                 /* Disconnect the PCM */
1066                 pv |= PLX_SLAVE_EN_N;
1067                 pv &= ~PLX_MASTER_EN;
1068                 pv &= ~PLX_SYNC_O_EN;
1069                 /* Put the DSP in Reset */
1070                 pv &= ~PLX_DSP_RES_N;
1071                 writel(pv, plx_acc_32);
1072                 if (debug & DEBUG_HFCMULTI_INIT)
1073                         printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n",
1074                                 __func__, pv);
1075                 spin_unlock_irqrestore(&plx_lock, plx_flags);
1076         }
1077
1078         /* disable memory mapped ports / io ports */
1079         test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
1080         if (hc->pci_dev)
1081                 pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
1082         if (hc->pci_membase)
1083                 iounmap(hc->pci_membase);
1084         if (hc->plx_membase)
1085                 iounmap(hc->plx_membase);
1086         if (hc->pci_iobase)
1087                 release_region(hc->pci_iobase, 8);
1088         if (hc->xhfc_membase)
1089                 iounmap((void *)hc->xhfc_membase);
1090
1091         if (hc->pci_dev) {
1092                 pci_disable_device(hc->pci_dev);
1093                 pci_set_drvdata(hc->pci_dev, NULL);
1094         }
1095         if (debug & DEBUG_HFCMULTI_INIT)
1096                 printk(KERN_DEBUG "%s: done\n", __func__);
1097 }
1098
1099 /*
1100  * function called to reset the HFC chip. A complete software reset of chip
1101  * and fifos is done. All configuration of the chip is done.
1102  */
1103
1104 static int
1105 init_chip(struct hfc_multi *hc)
1106 {
1107         u_long                  flags, val, val2 = 0, rev;
1108         int                     i, err = 0;
1109         u_char                  r_conf_en, rval;
1110         void __iomem            *plx_acc_32;
1111         u_int                   pv;
1112         u_long                  plx_flags, hfc_flags;
1113         int                     plx_count;
1114         struct hfc_multi        *pos, *next, *plx_last_hc;
1115
1116         spin_lock_irqsave(&hc->lock, flags);
1117         /* reset all registers */
1118         memset(&hc->hw, 0, sizeof(struct hfcm_hw));
1119
1120         /* revision check */
1121         if (debug & DEBUG_HFCMULTI_INIT)
1122                 printk(KERN_DEBUG "%s: entered\n", __func__);
1123         val = HFC_inb(hc, R_CHIP_ID);
1124         if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe &&
1125             (val >> 1) != 0x31) {
1126                 printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
1127                 err = -EIO;
1128                 goto out;
1129         }
1130         rev = HFC_inb(hc, R_CHIP_RV);
1131         printk(KERN_INFO
1132             "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
1133             val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ?
1134                 " (old FIFO handling)" : "");
1135         if (hc->ctype != HFC_TYPE_XHFC && rev == 0) {
1136                 test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
1137                 printk(KERN_WARNING
1138                     "HFC_multi: NOTE: Your chip is revision 0, "
1139                     "ask Cologne Chip for update. Newer chips "
1140                     "have a better FIFO handling. Old chips "
1141                     "still work but may have slightly lower "
1142                     "HDLC transmit performance.\n");
1143         }
1144         if (rev > 1) {
1145                 printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
1146                     "consider chip revision = %ld. The chip / "
1147                     "bridge may not work.\n", rev);
1148         }
1149
1150         /* set s-ram size */
1151         hc->Flen = 0x10;
1152         hc->Zmin = 0x80;
1153         hc->Zlen = 384;
1154         hc->DTMFbase = 0x1000;
1155         if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
1156                 if (debug & DEBUG_HFCMULTI_INIT)
1157                         printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
1158                             __func__);
1159                 hc->hw.r_ctrl |= V_EXT_RAM;
1160                 hc->hw.r_ram_sz = 1;
1161                 hc->Flen = 0x20;
1162                 hc->Zmin = 0xc0;
1163                 hc->Zlen = 1856;
1164                 hc->DTMFbase = 0x2000;
1165         }
1166         if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
1167                 if (debug & DEBUG_HFCMULTI_INIT)
1168                         printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
1169                             __func__);
1170                 hc->hw.r_ctrl |= V_EXT_RAM;
1171                 hc->hw.r_ram_sz = 2;
1172                 hc->Flen = 0x20;
1173                 hc->Zmin = 0xc0;
1174                 hc->Zlen = 8000;
1175                 hc->DTMFbase = 0x2000;
1176         }
1177         if (hc->ctype == HFC_TYPE_XHFC) {
1178                 hc->Flen = 0x8;
1179                 hc->Zmin = 0x0;
1180                 hc->Zlen = 64;
1181                 hc->DTMFbase = 0x0;
1182         }
1183         hc->max_trans = poll << 1;
1184         if (hc->max_trans > hc->Zlen)
1185                 hc->max_trans = hc->Zlen;
1186
1187         /* Speech Design PLX bridge */
1188         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1189                 if (debug & DEBUG_HFCMULTI_PLXSD)
1190                         printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
1191                             __func__, hc->id + 1);
1192                 spin_lock_irqsave(&plx_lock, plx_flags);
1193                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
1194                 writel(PLX_GPIOC_INIT, plx_acc_32);
1195                 pv = readl(plx_acc_32);
1196                 /* The first and the last cards are terminating the PCM bus */
1197                 pv |= PLX_TERM_ON; /* hc is currently the last */
1198                 /* Disconnect the PCM */
1199                 pv |= PLX_SLAVE_EN_N;
1200                 pv &= ~PLX_MASTER_EN;
1201                 pv &= ~PLX_SYNC_O_EN;
1202                 /* Put the DSP in Reset */
1203                 pv &= ~PLX_DSP_RES_N;
1204                 writel(pv, plx_acc_32);
1205                 spin_unlock_irqrestore(&plx_lock, plx_flags);
1206                 if (debug & DEBUG_HFCMULTI_INIT)
1207                         printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n",
1208                                 __func__, pv);
1209                 /*
1210                  * If we are the 3rd PLXSD card or higher, we must turn
1211                  * termination of last PLXSD card off.
1212                  */
1213                 spin_lock_irqsave(&HFClock, hfc_flags);
1214                 plx_count = 0;
1215                 plx_last_hc = NULL;
1216                 list_for_each_entry_safe(pos, next, &HFClist, list) {
1217                         if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
1218                                 plx_count++;
1219                                 if (pos != hc)
1220                                         plx_last_hc = pos;
1221                         }
1222                 }
1223                 if (plx_count >= 3) {
1224                         if (debug & DEBUG_HFCMULTI_PLXSD)
1225                                 printk(KERN_DEBUG "%s: card %d is between, so "
1226                                         "we disable termination\n",
1227                                     __func__, plx_last_hc->id + 1);
1228                         spin_lock_irqsave(&plx_lock, plx_flags);
1229                         plx_acc_32 = plx_last_hc->plx_membase + PLX_GPIOC;
1230                         pv = readl(plx_acc_32);
1231                         pv &= ~PLX_TERM_ON;
1232                         writel(pv, plx_acc_32);
1233                         spin_unlock_irqrestore(&plx_lock, plx_flags);
1234                         if (debug & DEBUG_HFCMULTI_INIT)
1235                                 printk(KERN_DEBUG
1236                                     "%s: term off: PLX_GPIO=%x\n",
1237                                     __func__, pv);
1238                 }
1239                 spin_unlock_irqrestore(&HFClock, hfc_flags);
1240                 hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
1241         }
1242
1243         if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
1244                 hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
1245
1246         /* we only want the real Z2 read-pointer for revision > 0 */
1247         if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
1248                 hc->hw.r_ram_sz |= V_FZ_MD;
1249
1250         /* select pcm mode */
1251         if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
1252                 if (debug & DEBUG_HFCMULTI_INIT)
1253                         printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
1254                             __func__);
1255         } else
1256         if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
1257                 if (debug & DEBUG_HFCMULTI_INIT)
1258                         printk(KERN_DEBUG "%s: setting PCM into master mode\n",
1259                             __func__);
1260                 hc->hw.r_pcm_md0 |= V_PCM_MD;
1261         } else {
1262                 if (debug & DEBUG_HFCMULTI_INIT)
1263                         printk(KERN_DEBUG "%s: performing PCM auto detect\n",
1264                             __func__);
1265         }
1266
1267         /* soft reset */
1268         HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
1269         if (hc->ctype == HFC_TYPE_XHFC)
1270                 HFC_outb(hc, 0x0C /* R_FIFO_THRES */,
1271                                 0x11 /* 16 Bytes TX/RX */);
1272         else
1273                 HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
1274         HFC_outb(hc, R_FIFO_MD, 0);
1275         if (hc->ctype == HFC_TYPE_XHFC)
1276                 hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES;
1277         else
1278                 hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES
1279                         | V_RLD_EPR;
1280         HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1281         udelay(100);
1282         hc->hw.r_cirm = 0;
1283         HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1284         udelay(100);
1285         if (hc->ctype != HFC_TYPE_XHFC)
1286                 HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
1287
1288         /* Speech Design PLX bridge pcm and sync mode */
1289         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1290                 spin_lock_irqsave(&plx_lock, plx_flags);
1291                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
1292                 pv = readl(plx_acc_32);
1293                 /* Connect PCM */
1294                 if (hc->hw.r_pcm_md0 & V_PCM_MD) {
1295                         pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
1296                         pv |= PLX_SYNC_O_EN;
1297                         if (debug & DEBUG_HFCMULTI_INIT)
1298                                 printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n",
1299                                         __func__, pv);
1300                 } else {
1301                         pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
1302                         pv &= ~PLX_SYNC_O_EN;
1303                         if (debug & DEBUG_HFCMULTI_INIT)
1304                                 printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n",
1305                                         __func__, pv);
1306                 }
1307                 writel(pv, plx_acc_32);
1308                 spin_unlock_irqrestore(&plx_lock, plx_flags);
1309         }
1310
1311         /* PCM setup */
1312         HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
1313         if (hc->slots == 32)
1314                 HFC_outb(hc, R_PCM_MD1, 0x00);
1315         if (hc->slots == 64)
1316                 HFC_outb(hc, R_PCM_MD1, 0x10);
1317         if (hc->slots == 128)
1318                 HFC_outb(hc, R_PCM_MD1, 0x20);
1319         HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
1320         if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
1321                 HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
1322         else if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
1323                 HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */
1324         else
1325                 HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
1326         HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
1327         for (i = 0; i < 256; i++) {
1328                 HFC_outb_nodebug(hc, R_SLOT, i);
1329                 HFC_outb_nodebug(hc, A_SL_CFG, 0);
1330                 if (hc->ctype != HFC_TYPE_XHFC)
1331                         HFC_outb_nodebug(hc, A_CONF, 0);
1332                 hc->slot_owner[i] = -1;
1333         }
1334
1335         /* set clock speed */
1336         if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
1337                 if (debug & DEBUG_HFCMULTI_INIT)
1338                         printk(KERN_DEBUG
1339                             "%s: setting double clock\n", __func__);
1340                 HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
1341         }
1342
1343         if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
1344                 HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */);
1345
1346         /* B410P GPIO */
1347         if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
1348                 printk(KERN_NOTICE "Setting GPIOs\n");
1349                 HFC_outb(hc, R_GPIO_SEL, 0x30);
1350                 HFC_outb(hc, R_GPIO_EN1, 0x3);
1351                 udelay(1000);
1352                 printk(KERN_NOTICE "calling vpm_init\n");
1353                 vpm_init(hc);
1354         }
1355
1356         /* check if R_F0_CNT counts (8 kHz frame count) */
1357         val = HFC_inb(hc, R_F0_CNTL);
1358         val += HFC_inb(hc, R_F0_CNTH) << 8;
1359         if (debug & DEBUG_HFCMULTI_INIT)
1360                 printk(KERN_DEBUG
1361                     "HFC_multi F0_CNT %ld after reset\n", val);
1362         spin_unlock_irqrestore(&hc->lock, flags);
1363         set_current_state(TASK_UNINTERRUPTIBLE);
1364         schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
1365         spin_lock_irqsave(&hc->lock, flags);
1366         val2 = HFC_inb(hc, R_F0_CNTL);
1367         val2 += HFC_inb(hc, R_F0_CNTH) << 8;
1368         if (debug & DEBUG_HFCMULTI_INIT)
1369                 printk(KERN_DEBUG
1370                         "HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
1371                     val2);
1372         if (val2 >= val+8) { /* 1 ms */
1373                 /* it counts, so we keep the pcm mode */
1374                 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
1375                         printk(KERN_INFO "controller is PCM bus MASTER\n");
1376                 else
1377                 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
1378                         printk(KERN_INFO "controller is PCM bus SLAVE\n");
1379                 else {
1380                         test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
1381                         printk(KERN_INFO "controller is PCM bus SLAVE "
1382                                 "(auto detected)\n");
1383                 }
1384         } else {
1385                 /* does not count */
1386                 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
1387 controller_fail:
1388                         printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
1389                             "pulse. Seems that controller fails.\n");
1390                         err = -EIO;
1391                         goto out;
1392                 }
1393                 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
1394                         printk(KERN_INFO "controller is PCM bus SLAVE "
1395                                 "(ignoring missing PCM clock)\n");
1396                 } else {
1397                         /* only one pcm master */
1398                         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
1399                                 && plxsd_master) {
1400                                 printk(KERN_ERR "HFC_multi ERROR, no clock "
1401                                     "on another Speech Design card found. "
1402                                     "Please be sure to connect PCM cable.\n");
1403                                 err = -EIO;
1404                                 goto out;
1405                         }
1406                         /* retry with master clock */
1407                         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1408                                 spin_lock_irqsave(&plx_lock, plx_flags);
1409                                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
1410                                 pv = readl(plx_acc_32);
1411                                 pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
1412                                 pv |= PLX_SYNC_O_EN;
1413                                 writel(pv, plx_acc_32);
1414                                 spin_unlock_irqrestore(&plx_lock, plx_flags);
1415                                 if (debug & DEBUG_HFCMULTI_INIT)
1416                                         printk(KERN_DEBUG "%s: master: "
1417                                             "PLX_GPIO=%x\n", __func__, pv);
1418                         }
1419                         hc->hw.r_pcm_md0 |= V_PCM_MD;
1420                         HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
1421                         spin_unlock_irqrestore(&hc->lock, flags);
1422                         set_current_state(TASK_UNINTERRUPTIBLE);
1423                         schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
1424                         spin_lock_irqsave(&hc->lock, flags);
1425                         val2 = HFC_inb(hc, R_F0_CNTL);
1426                         val2 += HFC_inb(hc, R_F0_CNTH) << 8;
1427                         if (debug & DEBUG_HFCMULTI_INIT)
1428                                 printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
1429                                         "10 ms (2nd try)\n", val2);
1430                         if (val2 >= val+8) { /* 1 ms */
1431                                 test_and_set_bit(HFC_CHIP_PCM_MASTER,
1432                                         &hc->chip);
1433                                 printk(KERN_INFO "controller is PCM bus MASTER "
1434                                         "(auto detected)\n");
1435                         } else
1436                                 goto controller_fail;
1437                 }
1438         }
1439
1440         /* Release the DSP Reset */
1441         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1442                 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
1443                         plxsd_master = 1;
1444                 spin_lock_irqsave(&plx_lock, plx_flags);
1445                 plx_acc_32 = hc->plx_membase + PLX_GPIOC;
1446                 pv = readl(plx_acc_32);
1447                 pv |=  PLX_DSP_RES_N;
1448                 writel(pv, plx_acc_32);
1449                 spin_unlock_irqrestore(&plx_lock, plx_flags);
1450                 if (debug & DEBUG_HFCMULTI_INIT)
1451                         printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n",
1452                                 __func__, pv);
1453         }
1454
1455         /* pcm id */
1456         if (hc->pcm)
1457                 printk(KERN_INFO "controller has given PCM BUS ID %d\n",
1458                         hc->pcm);
1459         else {
1460                 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
1461                  || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1462                         PCM_cnt++; /* SD has proprietary bridging */
1463                 }
1464                 hc->pcm = PCM_cnt;
1465                 printk(KERN_INFO "controller has PCM BUS ID %d "
1466                         "(auto selected)\n", hc->pcm);
1467         }
1468
1469         /* set up timer */
1470         HFC_outb(hc, R_TI_WD, poll_timer);
1471         hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
1472
1473         /* set E1 state machine IRQ */
1474         if (hc->ctype == HFC_TYPE_E1)
1475                 hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
1476
1477         /* set DTMF detection */
1478         if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
1479                 if (debug & DEBUG_HFCMULTI_INIT)
1480                         printk(KERN_DEBUG "%s: enabling DTMF detection "
1481                             "for all B-channel\n", __func__);
1482                 hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
1483                 if (test_bit(HFC_CHIP_ULAW, &hc->chip))
1484                         hc->hw.r_dtmf |= V_ULAW_SEL;
1485                 HFC_outb(hc, R_DTMF_N, 102 - 1);
1486                 hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
1487         }
1488
1489         /* conference engine */
1490         if (test_bit(HFC_CHIP_ULAW, &hc->chip))
1491                 r_conf_en = V_CONF_EN | V_ULAW;
1492         else
1493                 r_conf_en = V_CONF_EN;
1494         if (hc->ctype != HFC_TYPE_XHFC)
1495                 HFC_outb(hc, R_CONF_EN, r_conf_en);
1496
1497         /* setting leds */
1498         switch (hc->leds) {
1499         case 1: /* HFC-E1 OEM */
1500                 if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
1501                         HFC_outb(hc, R_GPIO_SEL, 0x32);
1502                 else
1503                         HFC_outb(hc, R_GPIO_SEL, 0x30);
1504
1505                 HFC_outb(hc, R_GPIO_EN1, 0x0f);
1506                 HFC_outb(hc, R_GPIO_OUT1, 0x00);
1507
1508                 HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
1509                 break;
1510
1511         case 2: /* HFC-4S OEM */
1512         case 3:
1513                 HFC_outb(hc, R_GPIO_SEL, 0xf0);
1514                 HFC_outb(hc, R_GPIO_EN1, 0xff);
1515                 HFC_outb(hc, R_GPIO_OUT1, 0x00);
1516                 break;
1517         }
1518
1519         if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) {
1520                 hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */
1521                 HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
1522         }
1523
1524         /* set master clock */
1525         if (hc->masterclk >= 0) {
1526                 if (debug & DEBUG_HFCMULTI_INIT)
1527                         printk(KERN_DEBUG "%s: setting ST master clock "
1528                             "to port %d (0..%d)\n",
1529                             __func__, hc->masterclk, hc->ports-1);
1530                 hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC);
1531                 HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
1532         }
1533
1534
1535
1536         /* setting misc irq */
1537         HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
1538         if (debug & DEBUG_HFCMULTI_INIT)
1539                 printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
1540                     hc->hw.r_irqmsk_misc);
1541
1542         /* RAM access test */
1543         HFC_outb(hc, R_RAM_ADDR0, 0);
1544         HFC_outb(hc, R_RAM_ADDR1, 0);
1545         HFC_outb(hc, R_RAM_ADDR2, 0);
1546         for (i = 0; i < 256; i++) {
1547                 HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
1548                 HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
1549         }
1550         for (i = 0; i < 256; i++) {
1551                 HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
1552                 HFC_inb_nodebug(hc, R_RAM_DATA);
1553                 rval = HFC_inb_nodebug(hc, R_INT_DATA);
1554                 if (rval != ((i * 3) & 0xff)) {
1555                         printk(KERN_DEBUG
1556                             "addr:%x val:%x should:%x\n", i, rval,
1557                             (i * 3) & 0xff);
1558                         err++;
1559                 }
1560         }
1561         if (err) {
1562                 printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
1563                 err = -EIO;
1564                 goto out;
1565         }
1566
1567         if (debug & DEBUG_HFCMULTI_INIT)
1568                 printk(KERN_DEBUG "%s: done\n", __func__);
1569 out:
1570         spin_unlock_irqrestore(&hc->lock, flags);
1571         return err;
1572 }
1573
1574
1575 /*
1576  * control the watchdog
1577  */
1578 static void
1579 hfcmulti_watchdog(struct hfc_multi *hc)
1580 {
1581         hc->wdcount++;
1582
1583         if (hc->wdcount > 10) {
1584                 hc->wdcount = 0;
1585                 hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
1586                     V_GPIO_OUT3 : V_GPIO_OUT2;
1587
1588         /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
1589                 HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
1590                 HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
1591         }
1592 }
1593
1594
1595
1596 /*
1597  * output leds
1598  */
1599 static void
1600 hfcmulti_leds(struct hfc_multi *hc)
1601 {
1602         unsigned long lled;
1603         unsigned long leddw;
1604         int i, state, active, leds;
1605         struct dchannel *dch;
1606         int led[4];
1607
1608         hc->ledcount += poll;
1609         if (hc->ledcount > 4096) {
1610                 hc->ledcount -= 4096;
1611                 hc->ledstate = 0xAFFEAFFE;
1612         }
1613
1614         switch (hc->leds) {
1615         case 1: /* HFC-E1 OEM */
1616                 /* 2 red blinking: NT mode deactivate
1617                  * 2 red steady:   TE mode deactivate
1618                  * left green:     L1 active
1619                  * left red:       frame sync, but no L1
1620                  * right green:    L2 active
1621                  */
1622                 if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
1623                         if (hc->chan[hc->dslot].dch->dev.D.protocol
1624                                 != ISDN_P_NT_E1) {
1625                                 led[0] = 1;
1626                                 led[1] = 1;
1627                         } else if (hc->ledcount>>11) {
1628                                 led[0] = 1;
1629                                 led[1] = 1;
1630                         } else {
1631                                 led[0] = 0;
1632                                 led[1] = 0;
1633                         }
1634                         led[2] = 0;
1635                         led[3] = 0;
1636                 } else { /* with frame sync */
1637                         /* TODO make it work */
1638                         led[0] = 0;
1639                         led[1] = 0;
1640                         led[2] = 0;
1641                         led[3] = 1;
1642                 }
1643                 leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
1644                         /* leds are inverted */
1645                 if (leds != (int)hc->ledstate) {
1646                         HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
1647                         hc->ledstate = leds;
1648                 }
1649                 break;
1650
1651         case 2: /* HFC-4S OEM */
1652                 /* red blinking = PH_DEACTIVATE NT Mode
1653                  * red steady   = PH_DEACTIVATE TE Mode
1654                  * green steady = PH_ACTIVATE
1655                  */
1656                 for (i = 0; i < 4; i++) {
1657                         state = 0;
1658                         active = -1;
1659                         dch = hc->chan[(i << 2) | 2].dch;
1660                         if (dch) {
1661                                 state = dch->state;
1662                                 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1663                                         active = 3;
1664                                 else
1665                                         active = 7;
1666                         }
1667                         if (state) {
1668                                 if (state == active) {
1669                                         led[i] = 1; /* led green */
1670                                 } else
1671                                         if (dch->dev.D.protocol == ISDN_P_TE_S0)
1672                                                 /* TE mode: led red */
1673                                                 led[i] = 2;
1674                                         else
1675                                                 if (hc->ledcount>>11)
1676                                                         /* led red */
1677                                                         led[i] = 2;
1678                                                 else
1679                                                         /* led off */
1680                                                         led[i] = 0;
1681                         } else
1682                                 led[i] = 0; /* led off */
1683                 }
1684                 if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
1685                         leds = 0;
1686                         for (i = 0; i < 4; i++) {
1687                                 if (led[i] == 1) {
1688                                         /*green*/
1689                                         leds |= (0x2 << (i * 2));
1690                                 } else if (led[i] == 2) {
1691                                         /*red*/
1692                                         leds |= (0x1 << (i * 2));
1693                                 }
1694                         }
1695                         if (leds != (int)hc->ledstate) {
1696                                 vpm_out(hc, 0, 0x1a8 + 3, leds);
1697                                 hc->ledstate = leds;
1698                         }
1699                 } else {
1700                         leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
1701                             ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
1702                             ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
1703                             ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
1704                         if (leds != (int)hc->ledstate) {
1705                                 HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
1706                                 HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
1707                                 hc->ledstate = leds;
1708                         }
1709                 }
1710                 break;
1711
1712         case 3: /* HFC 1S/2S Beronet */
1713                 /* red blinking = PH_DEACTIVATE NT Mode
1714                  * red steady   = PH_DEACTIVATE TE Mode
1715                  * green steady = PH_ACTIVATE
1716                  */
1717                 for (i = 0; i < 2; i++) {
1718                         state = 0;
1719                         active = -1;
1720                         dch = hc->chan[(i << 2) | 2].dch;
1721                         if (dch) {
1722                                 state = dch->state;
1723                                 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1724                                         active = 3;
1725                                 else
1726                                         active = 7;
1727                         }
1728                         if (state) {
1729                                 if (state == active) {
1730                                         led[i] = 1; /* led green */
1731                                 } else
1732                                         if (dch->dev.D.protocol == ISDN_P_TE_S0)
1733                                                 /* TE mode: led red */
1734                                                 led[i] = 2;
1735                                         else
1736                                                 if (hc->ledcount >> 11)
1737                                                         /* led red */
1738                                                         led[i] = 2;
1739                                                 else
1740                                                         /* led off */
1741                                                         led[i] = 0;
1742                         } else
1743                                 led[i] = 0; /* led off */
1744                 }
1745
1746
1747                 leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
1748                         | ((led[1]&1)<<3);
1749                 if (leds != (int)hc->ledstate) {
1750                         HFC_outb_nodebug(hc, R_GPIO_EN1,
1751                             ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
1752                         HFC_outb_nodebug(hc, R_GPIO_OUT1,
1753                             ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
1754                         hc->ledstate = leds;
1755                 }
1756                 break;
1757         case 8: /* HFC 8S+ Beronet */
1758                 lled = 0;
1759
1760                 for (i = 0; i < 8; i++) {
1761                         state = 0;
1762                         active = -1;
1763                         dch = hc->chan[(i << 2) | 2].dch;
1764                         if (dch) {
1765                                 state = dch->state;
1766                                 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1767                                         active = 3;
1768                                 else
1769                                         active = 7;
1770                         }
1771                         if (state) {
1772                                 if (state == active) {
1773                                         lled |= 0 << i;
1774                                 } else
1775                                         if (hc->ledcount >> 11)
1776                                                 lled |= 0 << i;
1777                                         else
1778                                                 lled |= 1 << i;
1779                         } else
1780                                 lled |= 1 << i;
1781                 }
1782                 leddw = lled << 24 | lled << 16 | lled << 8 | lled;
1783                 if (leddw != hc->ledstate) {
1784                         /* HFC_outb(hc, R_BRG_PCM_CFG, 1);
1785                         HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
1786                         /* was _io before */
1787                         HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
1788                         outw(0x4000, hc->pci_iobase + 4);
1789                         outl(leddw, hc->pci_iobase);
1790                         HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
1791                         hc->ledstate = leddw;
1792                 }
1793                 break;
1794         }
1795 }
1796 /*
1797  * read dtmf coefficients
1798  */
1799
1800 static void
1801 hfcmulti_dtmf(struct hfc_multi *hc)
1802 {
1803         s32             *coeff;
1804         u_int           mantissa;
1805         int             co, ch;
1806         struct bchannel *bch = NULL;
1807         u8              exponent;
1808         int             dtmf = 0;
1809         int             addr;
1810         u16             w_float;
1811         struct sk_buff  *skb;
1812         struct mISDNhead *hh;
1813
1814         if (debug & DEBUG_HFCMULTI_DTMF)
1815                 printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
1816         for (ch = 0; ch <= 31; ch++) {
1817                 /* only process enabled B-channels */
1818                 bch = hc->chan[ch].bch;
1819                 if (!bch)
1820                         continue;
1821                 if (!hc->created[hc->chan[ch].port])
1822                         continue;
1823                 if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
1824                         continue;
1825                 if (debug & DEBUG_HFCMULTI_DTMF)
1826                         printk(KERN_DEBUG "%s: dtmf channel %d:",
1827                                 __func__, ch);
1828                 coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
1829                 dtmf = 1;
1830                 for (co = 0; co < 8; co++) {
1831                         /* read W(n-1) coefficient */
1832                         addr = hc->DTMFbase + ((co<<7) | (ch<<2));
1833                         HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
1834                         HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
1835                         HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
1836                                 | V_ADDR_INC);
1837                         w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
1838                         w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
1839                         if (debug & DEBUG_HFCMULTI_DTMF)
1840                                 printk(" %04x", w_float);
1841
1842                         /* decode float (see chip doc) */
1843                         mantissa = w_float & 0x0fff;
1844                         if (w_float & 0x8000)
1845                                 mantissa |= 0xfffff000;
1846                         exponent = (w_float>>12) & 0x7;
1847                         if (exponent) {
1848                                 mantissa ^= 0x1000;
1849                                 mantissa <<= (exponent-1);
1850                         }
1851
1852                         /* store coefficient */
1853                         coeff[co<<1] = mantissa;
1854
1855                         /* read W(n) coefficient */
1856                         w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
1857                         w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
1858                         if (debug & DEBUG_HFCMULTI_DTMF)
1859                                 printk(" %04x", w_float);
1860
1861                         /* decode float (see chip doc) */
1862                         mantissa = w_float & 0x0fff;
1863                         if (w_float & 0x8000)
1864                                 mantissa |= 0xfffff000;
1865                         exponent = (w_float>>12) & 0x7;
1866                         if (exponent) {
1867                                 mantissa ^= 0x1000;
1868                                 mantissa <<= (exponent-1);
1869                         }
1870
1871                         /* store coefficient */
1872                         coeff[(co<<1)|1] = mantissa;
1873                 }
1874                 if (debug & DEBUG_HFCMULTI_DTMF)
1875                         printk(" DTMF ready %08x %08x %08x %08x "
1876                             "%08x %08x %08x %08x\n",
1877                             coeff[0], coeff[1], coeff[2], coeff[3],
1878                             coeff[4], coeff[5], coeff[6], coeff[7]);
1879                 hc->chan[ch].coeff_count++;
1880                 if (hc->chan[ch].coeff_count == 8) {
1881                         hc->chan[ch].coeff_count = 0;
1882                         skb = mI_alloc_skb(512, GFP_ATOMIC);
1883                         if (!skb) {
1884                                 printk(KERN_DEBUG "%s: No memory for skb\n",
1885                                     __func__);
1886                                 continue;
1887                         }
1888                         hh = mISDN_HEAD_P(skb);
1889                         hh->prim = PH_CONTROL_IND;
1890                         hh->id = DTMF_HFC_COEF;
1891                         memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
1892                         recv_Bchannel_skb(bch, skb);
1893                 }
1894         }
1895
1896         /* restart DTMF processing */
1897         hc->dtmf = dtmf;
1898         if (dtmf)
1899                 HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
1900 }
1901
1902
1903 /*
1904  * fill fifo as much as possible
1905  */
1906
1907 static void
1908 hfcmulti_tx(struct hfc_multi *hc, int ch)
1909 {
1910         int i, ii, temp, len = 0;
1911         int Zspace, z1, z2; /* must be int for calculation */
1912         int Fspace, f1, f2;
1913         u_char *d;
1914         int *txpending, slot_tx;
1915         struct  bchannel *bch;
1916         struct  dchannel *dch;
1917         struct  sk_buff **sp = NULL;
1918         int *idxp;
1919
1920         bch = hc->chan[ch].bch;
1921         dch = hc->chan[ch].dch;
1922         if ((!dch) && (!bch))
1923                 return;
1924
1925         txpending = &hc->chan[ch].txpending;
1926         slot_tx = hc->chan[ch].slot_tx;
1927         if (dch) {
1928                 if (!test_bit(FLG_ACTIVE, &dch->Flags))
1929                         return;
1930                 sp = &dch->tx_skb;
1931                 idxp = &dch->tx_idx;
1932         } else {
1933                 if (!test_bit(FLG_ACTIVE, &bch->Flags))
1934                         return;
1935                 sp = &bch->tx_skb;
1936                 idxp = &bch->tx_idx;
1937         }
1938         if (*sp)
1939                 len = (*sp)->len;
1940
1941         if ((!len) && *txpending != 1)
1942                 return; /* no data */
1943
1944         if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
1945             (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
1946             (hc->chan[ch].slot_rx < 0) &&
1947             (hc->chan[ch].slot_tx < 0))
1948                 HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
1949         else
1950                 HFC_outb_nodebug(hc, R_FIFO, ch << 1);
1951         HFC_wait_nodebug(hc);
1952
1953         if (*txpending == 2) {
1954                 /* reset fifo */
1955                 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
1956                 HFC_wait_nodebug(hc);
1957                 HFC_outb(hc, A_SUBCH_CFG, 0);
1958                 *txpending = 1;
1959         }
1960 next_frame:
1961         if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
1962                 f1 = HFC_inb_nodebug(hc, A_F1);
1963                 f2 = HFC_inb_nodebug(hc, A_F2);
1964                 while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
1965                         if (debug & DEBUG_HFCMULTI_FIFO)
1966                                 printk(KERN_DEBUG
1967                                     "%s(card %d): reread f2 because %d!=%d\n",
1968                                     __func__, hc->id + 1, temp, f2);
1969                         f2 = temp; /* repeat until F2 is equal */
1970                 }
1971                 Fspace = f2 - f1 - 1;
1972                 if (Fspace < 0)
1973                         Fspace += hc->Flen;
1974                 /*
1975                  * Old FIFO handling doesn't give us the current Z2 read
1976                  * pointer, so we cannot send the next frame before the fifo
1977                  * is empty. It makes no difference except for a slightly
1978                  * lower performance.
1979                  */
1980                 if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
1981                         if (f1 != f2)
1982                                 Fspace = 0;
1983                         else
1984                                 Fspace = 1;
1985                 }
1986                 /* one frame only for ST D-channels, to allow resending */
1987                 if (hc->ctype != HFC_TYPE_E1 && dch) {
1988                         if (f1 != f2)
1989                                 Fspace = 0;
1990                 }
1991                 /* F-counter full condition */
1992                 if (Fspace == 0)
1993                         return;
1994         }
1995         z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
1996         z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
1997         while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
1998                 if (debug & DEBUG_HFCMULTI_FIFO)
1999                         printk(KERN_DEBUG "%s(card %d): reread z2 because "
2000                                 "%d!=%d\n", __func__, hc->id + 1, temp, z2);
2001                 z2 = temp; /* repeat unti Z2 is equal */
2002         }
2003         hc->chan[ch].Zfill = z1 - z2;
2004         if (hc->chan[ch].Zfill < 0)
2005                 hc->chan[ch].Zfill += hc->Zlen;
2006         Zspace = z2 - z1;
2007         if (Zspace <= 0)
2008                 Zspace += hc->Zlen;
2009         Zspace -= 4; /* keep not too full, so pointers will not overrun */
2010         /* fill transparent data only to maxinum transparent load (minus 4) */
2011         if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
2012                 Zspace = Zspace - hc->Zlen + hc->max_trans;
2013         if (Zspace <= 0) /* no space of 4 bytes */
2014                 return;
2015
2016         /* if no data */
2017         if (!len) {
2018                 if (z1 == z2) { /* empty */
2019                         /* if done with FIFO audio data during PCM connection */
2020                         if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
2021                             *txpending && slot_tx >= 0) {
2022                                 if (debug & DEBUG_HFCMULTI_MODE)
2023                                         printk(KERN_DEBUG
2024                                             "%s: reconnecting PCM due to no "
2025                                             "more FIFO data: channel %d "
2026                                             "slot_tx %d\n",
2027                                             __func__, ch, slot_tx);
2028                                 /* connect slot */
2029                                 if (hc->ctype == HFC_TYPE_XHFC)
2030                                         HFC_outb(hc, A_CON_HDLC, 0xc0
2031                                             | 0x07 << 2 | V_HDLC_TRP | V_IFF);
2032                                                 /* Enable FIFO, no interrupt */
2033                                 else
2034                                         HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
2035                                             V_HDLC_TRP | V_IFF);
2036                                 HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
2037                                 HFC_wait_nodebug(hc);
2038                                 if (hc->ctype == HFC_TYPE_XHFC)
2039                                         HFC_outb(hc, A_CON_HDLC, 0xc0
2040                                             | 0x07 << 2 | V_HDLC_TRP | V_IFF);
2041                                                 /* Enable FIFO, no interrupt */
2042                                 else
2043                                         HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
2044                                             V_HDLC_TRP | V_IFF);
2045                                 HFC_outb_nodebug(hc, R_FIFO, ch<<1);
2046                                 HFC_wait_nodebug(hc);
2047                         }
2048                         *txpending = 0;
2049                 }
2050                 return; /* no data */
2051         }
2052
2053         /* "fill fifo if empty" feature */
2054         if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags)
2055                 && !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) {
2056                 if (debug & DEBUG_HFCMULTI_FILL)
2057                         printk(KERN_DEBUG "%s: buffer empty, so we have "
2058                                 "underrun\n", __func__);
2059                 /* fill buffer, to prevent future underrun */
2060                 hc->write_fifo(hc, hc->silence_data, poll >> 1);
2061                 Zspace -= (poll >> 1);
2062         }
2063
2064         /* if audio data and connected slot */
2065         if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
2066                 && slot_tx >= 0) {
2067                 if (debug & DEBUG_HFCMULTI_MODE)
2068                         printk(KERN_DEBUG "%s: disconnecting PCM due to "
2069                             "FIFO data: channel %d slot_tx %d\n",
2070                             __func__, ch, slot_tx);
2071                 /* disconnect slot */
2072                 if (hc->ctype == HFC_TYPE_XHFC)
2073                         HFC_outb(hc, A_CON_HDLC, 0x80
2074                             | 0x07 << 2 | V_HDLC_TRP | V_IFF);
2075                                 /* Enable FIFO, no interrupt */
2076                 else
2077                         HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
2078                             V_HDLC_TRP | V_IFF);
2079                 HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
2080                 HFC_wait_nodebug(hc);
2081                 if (hc->ctype == HFC_TYPE_XHFC)
2082                         HFC_outb(hc, A_CON_HDLC, 0x80
2083                             | 0x07 << 2 | V_HDLC_TRP | V_IFF);
2084                                 /* Enable FIFO, no interrupt */
2085                 else
2086                         HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
2087                             V_HDLC_TRP | V_IFF);
2088                 HFC_outb_nodebug(hc, R_FIFO, ch<<1);
2089                 HFC_wait_nodebug(hc);
2090         }
2091         *txpending = 1;
2092
2093         /* show activity */
2094         hc->activity[hc->chan[ch].port] = 1;
2095
2096         /* fill fifo to what we have left */
2097         ii = len;
2098         if (dch || test_bit(FLG_HDLC, &bch->Flags))
2099                 temp = 1;
2100         else
2101                 temp = 0;
2102         i = *idxp;
2103         d = (*sp)->data + i;
2104         if (ii - i > Zspace)
2105                 ii = Zspace + i;
2106         if (debug & DEBUG_HFCMULTI_FIFO)
2107                 printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
2108                     "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
2109                         __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
2110                         temp ? "HDLC" : "TRANS");
2111
2112         /* Have to prep the audio data */
2113         hc->write_fifo(hc, d, ii - i);
2114         hc->chan[ch].Zfill += ii - i;
2115         *idxp = ii;
2116
2117         /* if not all data has been written */
2118         if (ii != len) {
2119                 /* NOTE: fifo is started by the calling function */
2120                 return;
2121         }
2122
2123         /* if all data has been written, terminate frame */
2124         if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2125                 /* increment f-counter */
2126                 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
2127                 HFC_wait_nodebug(hc);
2128         }
2129
2130         /* send confirm, since get_net_bframe will not do it with trans */
2131         if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
2132                 confirm_Bsend(bch);
2133
2134         /* check for next frame */
2135         dev_kfree_skb(*sp);
2136         if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
2137                 len = (*sp)->len;
2138                 goto next_frame;
2139         }
2140         if (dch && get_next_dframe(dch)) {
2141                 len = (*sp)->len;
2142                 goto next_frame;
2143         }
2144
2145         /*
2146          * now we have no more data, so in case of transparent,
2147          * we set the last byte in fifo to 'silence' in case we will get
2148          * no more data at all. this prevents sending an undefined value.
2149          */
2150         if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
2151                 HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
2152 }
2153
2154
2155 /* NOTE: only called if E1 card is in active state */
2156 static void
2157 hfcmulti_rx(struct hfc_multi *hc, int ch)
2158 {
2159         int temp;
2160         int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
2161         int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
2162         int again = 0;
2163         struct  bchannel *bch;
2164         struct  dchannel *dch;
2165         struct sk_buff  *skb, **sp = NULL;
2166         int     maxlen;
2167
2168         bch = hc->chan[ch].bch;
2169         dch = hc->chan[ch].dch;
2170         if ((!dch) && (!bch))
2171                 return;
2172         if (dch) {
2173                 if (!test_bit(FLG_ACTIVE, &dch->Flags))
2174                         return;
2175                 sp = &dch->rx_skb;
2176                 maxlen = dch->maxlen;
2177         } else {
2178                 if (!test_bit(FLG_ACTIVE, &bch->Flags))
2179                         return;
2180                 sp = &bch->rx_skb;
2181                 maxlen = bch->maxlen;
2182         }
2183 next_frame:
2184         /* on first AND before getting next valid frame, R_FIFO must be written
2185            to. */
2186         if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
2187             (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
2188             (hc->chan[ch].slot_rx < 0) &&
2189             (hc->chan[ch].slot_tx < 0))
2190                 HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
2191         else
2192                 HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
2193         HFC_wait_nodebug(hc);
2194
2195         /* ignore if rx is off BUT change fifo (above) to start pending TX */
2196         if (hc->chan[ch].rx_off)
2197                 return;
2198
2199         if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2200                 f1 = HFC_inb_nodebug(hc, A_F1);
2201                 while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
2202                         if (debug & DEBUG_HFCMULTI_FIFO)
2203                                 printk(KERN_DEBUG
2204                                     "%s(card %d): reread f1 because %d!=%d\n",
2205                                     __func__, hc->id + 1, temp, f1);
2206                         f1 = temp; /* repeat until F1 is equal */
2207                 }
2208                 f2 = HFC_inb_nodebug(hc, A_F2);
2209         }
2210         z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
2211         while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
2212                 if (debug & DEBUG_HFCMULTI_FIFO)
2213                         printk(KERN_DEBUG "%s(card %d): reread z2 because "
2214                                 "%d!=%d\n", __func__, hc->id + 1, temp, z2);
2215                 z1 = temp; /* repeat until Z1 is equal */
2216         }
2217         z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
2218         Zsize = z1 - z2;
2219         if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
2220                 /* complete hdlc frame */
2221                 Zsize++;
2222         if (Zsize < 0)
2223                 Zsize += hc->Zlen;
2224         /* if buffer is empty */
2225         if (Zsize <= 0)
2226                 return;
2227
2228         if (*sp == NULL) {
2229                 *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
2230                 if (*sp == NULL) {
2231                         printk(KERN_DEBUG "%s: No mem for rx_skb\n",
2232                             __func__);
2233                         return;
2234                 }
2235         }
2236         /* show activity */
2237         hc->activity[hc->chan[ch].port] = 1;
2238
2239         /* empty fifo with what we have */
2240         if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2241                 if (debug & DEBUG_HFCMULTI_FIFO)
2242                         printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
2243                             "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
2244                             "got=%d (again %d)\n", __func__, hc->id + 1, ch,
2245                             Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
2246                             f1, f2, Zsize + (*sp)->len, again);
2247                 /* HDLC */
2248                 if ((Zsize + (*sp)->len) > (maxlen + 3)) {
2249                         if (debug & DEBUG_HFCMULTI_FIFO)
2250                                 printk(KERN_DEBUG
2251                                     "%s(card %d): hdlc-frame too large.\n",
2252                                     __func__, hc->id + 1);
2253                         skb_trim(*sp, 0);
2254                         HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
2255                         HFC_wait_nodebug(hc);
2256                         return;
2257                 }
2258
2259                 hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
2260
2261                 if (f1 != f2) {
2262                         /* increment Z2,F2-counter */
2263                         HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
2264                         HFC_wait_nodebug(hc);
2265                         /* check size */
2266                         if ((*sp)->len < 4) {
2267                                 if (debug & DEBUG_HFCMULTI_FIFO)
2268                                         printk(KERN_DEBUG
2269                                             "%s(card %d): Frame below minimum "
2270                                             "size\n", __func__, hc->id + 1);
2271                                 skb_trim(*sp, 0);
2272                                 goto next_frame;
2273                         }
2274                         /* there is at least one complete frame, check crc */
2275                         if ((*sp)->data[(*sp)->len - 1]) {
2276                                 if (debug & DEBUG_HFCMULTI_CRC)
2277                                         printk(KERN_DEBUG
2278                                             "%s: CRC-error\n", __func__);
2279                                 skb_trim(*sp, 0);
2280                                 goto next_frame;
2281                         }
2282                         skb_trim(*sp, (*sp)->len - 3);
2283                         if ((*sp)->len < MISDN_COPY_SIZE) {
2284                                 skb = *sp;
2285                                 *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
2286                                 if (*sp) {
2287                                         memcpy(skb_put(*sp, skb->len),
2288                                             skb->data, skb->len);
2289                                         skb_trim(skb, 0);
2290                                 } else {
2291                                         printk(KERN_DEBUG "%s: No mem\n",
2292                                             __func__);
2293                                         *sp = skb;
2294                                         skb = NULL;
2295                                 }
2296                         } else {
2297                                 skb = NULL;
2298                         }
2299                         if (debug & DEBUG_HFCMULTI_FIFO) {
2300                                 printk(KERN_DEBUG "%s(card %d):",
2301                                         __func__, hc->id + 1);
2302                                 temp = 0;
2303                                 while (temp < (*sp)->len)
2304                                         printk(" %02x", (*sp)->data[temp++]);
2305                                 printk("\n");
2306                         }
2307                         if (dch)
2308                                 recv_Dchannel(dch);
2309                         else
2310                                 recv_Bchannel(bch, MISDN_ID_ANY);
2311                         *sp = skb;
2312                         again++;
2313                         goto next_frame;
2314                 }
2315                 /* there is an incomplete frame */
2316         } else {
2317                 /* transparent */
2318                 if (Zsize > skb_tailroom(*sp))
2319                         Zsize = skb_tailroom(*sp);
2320                 hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
2321                 if (((*sp)->len) < MISDN_COPY_SIZE) {
2322                         skb = *sp;
2323                         *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
2324                         if (*sp) {
2325                                 memcpy(skb_put(*sp, skb->len),
2326                                     skb->data, skb->len);
2327                                 skb_trim(skb, 0);
2328                         } else {
2329                                 printk(KERN_DEBUG "%s: No mem\n", __func__);
2330                                 *sp = skb;
2331                                 skb = NULL;
2332                         }
2333                 } else {
2334                         skb = NULL;
2335                 }
2336                 if (debug & DEBUG_HFCMULTI_FIFO)
2337                         printk(KERN_DEBUG
2338                             "%s(card %d): fifo(%d) reading %d bytes "
2339                             "(z1=%04x, z2=%04x) TRANS\n",
2340                                 __func__, hc->id + 1, ch, Zsize, z1, z2);
2341                 /* only bch is transparent */
2342                 recv_Bchannel(bch, hc->chan[ch].Zfill);
2343                 *sp = skb;
2344         }
2345 }
2346
2347
2348 /*
2349  * Interrupt handler
2350  */
2351 static void
2352 signal_state_up(struct dchannel *dch, int info, char *msg)
2353 {
2354         struct sk_buff  *skb;
2355         int             id, data = info;
2356
2357         if (debug & DEBUG_HFCMULTI_STATE)
2358                 printk(KERN_DEBUG "%s: %s\n", __func__, msg);
2359
2360         id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
2361
2362         skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
2363                 GFP_ATOMIC);
2364         if (!skb)
2365                 return;
2366         recv_Dchannel_skb(dch, skb);
2367 }
2368
2369 static inline void
2370 handle_timer_irq(struct hfc_multi *hc)
2371 {
2372         int             ch, temp;
2373         struct dchannel *dch;
2374         u_long          flags;
2375
2376         /* process queued resync jobs */
2377         if (hc->e1_resync) {
2378                 /* lock, so e1_resync gets not changed */
2379                 spin_lock_irqsave(&HFClock, flags);
2380                 if (hc->e1_resync & 1) {
2381                         if (debug & DEBUG_HFCMULTI_PLXSD)
2382                                 printk(KERN_DEBUG "Enable SYNC_I\n");
2383                         HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
2384                         /* disable JATT, if RX_SYNC is set */
2385                         if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
2386                                 HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
2387                 }
2388                 if (hc->e1_resync & 2) {
2389                         if (debug & DEBUG_HFCMULTI_PLXSD)
2390                                 printk(KERN_DEBUG "Enable jatt PLL\n");
2391                         HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
2392                 }
2393                 if (hc->e1_resync & 4) {
2394                         if (debug & DEBUG_HFCMULTI_PLXSD)
2395                                 printk(KERN_DEBUG
2396                                     "Enable QUARTZ for HFC-E1\n");
2397                         /* set jatt to quartz */
2398                         HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
2399                                 | V_JATT_OFF);
2400                         /* switch to JATT, in case it is not already */
2401                         HFC_outb(hc, R_SYNC_OUT, 0);
2402                 }
2403                 hc->e1_resync = 0;
2404                 spin_unlock_irqrestore(&HFClock, flags);
2405         }
2406
2407         if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1)
2408                 for (ch = 0; ch <= 31; ch++) {
2409                         if (hc->created[hc->chan[ch].port]) {
2410                                 hfcmulti_tx(hc, ch);
2411                                 /* fifo is started when switching to rx-fifo */
2412                                 hfcmulti_rx(hc, ch);
2413                                 if (hc->chan[ch].dch &&
2414                                     hc->chan[ch].nt_timer > -1) {
2415                                         dch = hc->chan[ch].dch;
2416                                         if (!(--hc->chan[ch].nt_timer)) {
2417                                                 schedule_event(dch,
2418                                                     FLG_PHCHANGE);
2419                                                 if (debug &
2420                                                     DEBUG_HFCMULTI_STATE)
2421                                                         printk(KERN_DEBUG
2422                                                             "%s: nt_timer at "
2423                                                             "state %x\n",
2424                                                             __func__,
2425                                                             dch->state);
2426                                         }
2427                                 }
2428                         }
2429                 }
2430         if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) {
2431                 dch = hc->chan[hc->dslot].dch;
2432                 if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
2433                         /* LOS */
2434                         temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
2435                         if (!temp && hc->chan[hc->dslot].los)
2436                                 signal_state_up(dch, L1_SIGNAL_LOS_ON,
2437                                     "LOS detected");
2438                         if (temp && !hc->chan[hc->dslot].los)
2439                                 signal_state_up(dch, L1_SIGNAL_LOS_OFF,
2440                                     "LOS gone");
2441                         hc->chan[hc->dslot].los = temp;
2442                 }
2443                 if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
2444                         /* AIS */
2445                         temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
2446                         if (!temp && hc->chan[hc->dslot].ais)
2447                                 signal_state_up(dch, L1_SIGNAL_AIS_ON,
2448                                     "AIS detected");
2449                         if (temp && !hc->chan[hc->dslot].ais)
2450                                 signal_state_up(dch, L1_SIGNAL_AIS_OFF,
2451                                     "AIS gone");
2452                         hc->chan[hc->dslot].ais = temp;
2453                 }
2454                 if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
2455                         /* SLIP */
2456                         temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
2457                         if (!temp && hc->chan[hc->dslot].slip_rx)
2458                                 signal_state_up(dch, L1_SIGNAL_SLIP_RX,
2459                                     " bit SLIP detected RX");
2460                         hc->chan[hc->dslot].slip_rx = temp;
2461                         temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
2462                         if (!temp && hc->chan[hc->dslot].slip_tx)
2463                                 signal_state_up(dch, L1_SIGNAL_SLIP_TX,
2464                                     " bit SLIP detected TX");
2465                         hc->chan[hc->dslot].slip_tx = temp;
2466                 }
2467                 if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
2468                         /* RDI */
2469                         temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
2470                         if (!temp && hc->chan[hc->dslot].rdi)
2471                                 signal_state_up(dch, L1_SIGNAL_RDI_ON,
2472                                     "RDI detected");
2473                         if (temp && !hc->chan[hc->dslot].rdi)
2474                                 signal_state_up(dch, L1_SIGNAL_RDI_OFF,
2475                                     "RDI gone");
2476                         hc->chan[hc->dslot].rdi = temp;
2477                 }
2478                 temp = HFC_inb_nodebug(hc, R_JATT_DIR);
2479                 switch (hc->chan[hc->dslot].sync) {
2480                 case 0:
2481                         if ((temp & 0x60) == 0x60) {
2482                                 if (debug & DEBUG_HFCMULTI_SYNC)
2483                                         printk(KERN_DEBUG
2484                                             "%s: (id=%d) E1 now "
2485                                             "in clock sync\n",
2486                                             __func__, hc->id);
2487                                 HFC_outb(hc, R_RX_OFF,
2488                                     hc->chan[hc->dslot].jitter | V_RX_INIT);
2489                                 HFC_outb(hc, R_TX_OFF,
2490                                     hc->chan[hc->dslot].jitter | V_RX_INIT);
2491                                 hc->chan[hc->dslot].sync = 1;
2492                                 goto check_framesync;
2493                         }
2494                         break;
2495                 case 1:
2496                         if ((temp & 0x60) != 0x60) {
2497                                 if (debug & DEBUG_HFCMULTI_SYNC)
2498                                         printk(KERN_DEBUG
2499                                             "%s: (id=%d) E1 "
2500                                             "lost clock sync\n",
2501                                             __func__, hc->id);
2502                                 hc->chan[hc->dslot].sync = 0;
2503                                 break;
2504                         }
2505 check_framesync:
2506                         temp = HFC_inb_nodebug(hc, R_SYNC_STA);
2507                         if (temp == 0x27) {
2508                                 if (debug & DEBUG_HFCMULTI_SYNC)
2509                                         printk(KERN_DEBUG
2510                                             "%s: (id=%d) E1 "
2511                                             "now in frame sync\n",
2512                                             __func__, hc->id);
2513                                 hc->chan[hc->dslot].sync = 2;
2514                         }
2515                         break;
2516                 case 2:
2517                         if ((temp & 0x60) != 0x60) {
2518                                 if (debug & DEBUG_HFCMULTI_SYNC)
2519                                         printk(KERN_DEBUG
2520                                             "%s: (id=%d) E1 lost "
2521                                             "clock & frame sync\n",
2522                                             __func__, hc->id);
2523                                 hc->chan[hc->dslot].sync = 0;
2524                                 break;
2525                         }
2526                         temp = HFC_inb_nodebug(hc, R_SYNC_STA);
2527                         if (temp != 0x27) {
2528                                 if (debug & DEBUG_HFCMULTI_SYNC)
2529                                         printk(KERN_DEBUG
2530                                             "%s: (id=%d) E1 "
2531                                             "lost frame sync\n",
2532                                             __func__, hc->id);
2533                                 hc->chan[hc->dslot].sync = 1;
2534                         }
2535                         break;
2536                 }
2537         }
2538
2539         if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
2540                 hfcmulti_watchdog(hc);
2541
2542         if (hc->leds)
2543                 hfcmulti_leds(hc);
2544 }
2545
2546 static void
2547 ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
2548 {
2549         struct dchannel *dch;
2550         int             ch;
2551         int             active;
2552         u_char          st_status, temp;
2553
2554         /* state machine */
2555         for (ch = 0; ch <= 31; ch++) {
2556                 if (hc->chan[ch].dch) {
2557                         dch = hc->chan[ch].dch;
2558                         if (r_irq_statech & 1) {
2559                                 HFC_outb_nodebug(hc, R_ST_SEL,
2560                                         hc->chan[ch].port);
2561                                 /* undocumented: delay after R_ST_SEL */
2562                                 udelay(1);
2563                                 /* undocumented: status changes during read */
2564                                 st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
2565                                 while (st_status != (temp =
2566                                         HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
2567                                         if (debug & DEBUG_HFCMULTI_STATE)
2568                                                 printk(KERN_DEBUG "%s: reread "
2569                                                     "STATE because %d!=%d\n",
2570                                                     __func__, temp,
2571                                                     st_status);
2572                                         st_status = temp; /* repeat */
2573                                 }
2574
2575                                 /* Speech Design TE-sync indication */
2576                                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
2577                                         dch->dev.D.protocol == ISDN_P_TE_S0) {
2578                                         if (st_status & V_FR_SYNC_ST)
2579                                                 hc->syncronized |=
2580                                                     (1 << hc->chan[ch].port);
2581                                         else
2582                                                 hc->syncronized &=
2583                                                    ~(1 << hc->chan[ch].port);
2584                                 }
2585                                 dch->state = st_status & 0x0f;
2586                                 if (dch->dev.D.protocol == ISDN_P_NT_S0)
2587                                         active = 3;
2588                                 else
2589                                         active = 7;
2590                                 if (dch->state == active) {
2591                                         HFC_outb_nodebug(hc, R_FIFO,
2592                                                 (ch << 1) | 1);
2593                                         HFC_wait_nodebug(hc);
2594                                         HFC_outb_nodebug(hc,
2595                                                 R_INC_RES_FIFO, V_RES_F);
2596                                         HFC_wait_nodebug(hc);
2597                                         dch->tx_idx = 0;
2598                                 }
2599                                 schedule_event(dch, FLG_PHCHANGE);
2600                                 if (debug & DEBUG_HFCMULTI_STATE)
2601                                         printk(KERN_DEBUG
2602                                             "%s: S/T newstate %x port %d\n",
2603                                             __func__, dch->state,
2604                                             hc->chan[ch].port);
2605                         }
2606                         r_irq_statech >>= 1;
2607                 }
2608         }
2609         if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
2610                 plxsd_checksync(hc, 0);
2611 }
2612
2613 static void
2614 fifo_irq(struct hfc_multi *hc, int block)
2615 {
2616         int     ch, j;
2617         struct dchannel *dch;
2618         struct bchannel *bch;
2619         u_char r_irq_fifo_bl;
2620
2621         r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
2622         j = 0;
2623         while (j < 8) {
2624                 ch = (block << 2) + (j >> 1);
2625                 dch = hc->chan[ch].dch;
2626                 bch = hc->chan[ch].bch;
2627                 if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
2628                         j += 2;
2629                         continue;
2630                 }
2631                 if (dch && (r_irq_fifo_bl & (1 << j)) &&
2632                     test_bit(FLG_ACTIVE, &dch->Flags)) {
2633                         hfcmulti_tx(hc, ch);
2634                         /* start fifo */
2635                         HFC_outb_nodebug(hc, R_FIFO, 0);
2636                         HFC_wait_nodebug(hc);
2637                 }
2638                 if (bch && (r_irq_fifo_bl & (1 << j)) &&
2639                     test_bit(FLG_ACTIVE, &bch->Flags)) {
2640                         hfcmulti_tx(hc, ch);
2641                         /* start fifo */
2642                         HFC_outb_nodebug(hc, R_FIFO, 0);
2643                         HFC_wait_nodebug(hc);
2644                 }
2645                 j++;
2646                 if (dch && (r_irq_fifo_bl & (1 << j)) &&
2647                     test_bit(FLG_ACTIVE, &dch->Flags)) {
2648                         hfcmulti_rx(hc, ch);
2649                 }
2650                 if (bch && (r_irq_fifo_bl & (1 << j)) &&
2651                     test_bit(FLG_ACTIVE, &bch->Flags)) {
2652                         hfcmulti_rx(hc, ch);
2653                 }
2654                 j++;
2655         }
2656 }
2657
2658 #ifdef IRQ_DEBUG
2659 int irqsem;
2660 #endif
2661 static irqreturn_t
2662 hfcmulti_interrupt(int intno, void *dev_id)
2663 {
2664 #ifdef IRQCOUNT_DEBUG
2665         static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
2666             iq5 = 0, iq6 = 0, iqcnt = 0;
2667 #endif
2668         struct hfc_multi        *hc = dev_id;
2669         struct dchannel         *dch;
2670         u_char                  r_irq_statech, status, r_irq_misc, r_irq_oview;
2671         int                     i;
2672         void __iomem            *plx_acc;
2673         u_short                 wval;
2674         u_char                  e1_syncsta, temp;
2675         u_long                  flags;
2676
2677         if (!hc) {
2678                 printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
2679                 return IRQ_NONE;
2680         }
2681
2682         spin_lock(&hc->lock);
2683
2684 #ifdef IRQ_DEBUG
2685         if (irqsem)
2686                 printk(KERN_ERR "irq for card %d during irq from "
2687                 "card %d, this is no bug.\n", hc->id + 1, irqsem);
2688         irqsem = hc->id + 1;
2689 #endif
2690 #ifdef CONFIG_MISDN_HFCMULTI_8xx
2691         if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk)
2692                 goto irq_notforus;
2693 #endif
2694         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
2695                 spin_lock_irqsave(&plx_lock, flags);
2696                 plx_acc = hc->plx_membase + PLX_INTCSR;
2697                 wval = readw(plx_acc);
2698                 spin_unlock_irqrestore(&plx_lock, flags);
2699                 if (!(wval & PLX_INTCSR_LINTI1_STATUS))
2700                         goto irq_notforus;
2701         }
2702
2703         status = HFC_inb_nodebug(hc, R_STATUS);
2704         r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
2705 #ifdef IRQCOUNT_DEBUG
2706         if (r_irq_statech)
2707                 iq1++;
2708         if (status & V_DTMF_STA)
2709                 iq2++;
2710         if (status & V_LOST_STA)
2711                 iq3++;
2712         if (status & V_EXT_IRQSTA)
2713                 iq4++;
2714         if (status & V_MISC_IRQSTA)
2715                 iq5++;
2716         if (status & V_FR_IRQSTA)
2717                 iq6++;
2718         if (iqcnt++ > 5000) {
2719                 printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
2720                     iq1, iq2, iq3, iq4, iq5, iq6);
2721                 iqcnt = 0;
2722         }
2723 #endif
2724
2725         if (!r_irq_statech &&
2726             !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
2727             V_MISC_IRQSTA | V_FR_IRQSTA))) {
2728                 /* irq is not for us */
2729                 goto irq_notforus;
2730         }
2731         hc->irqcnt++;
2732         if (r_irq_statech) {
2733                 if (hc->ctype != HFC_TYPE_E1)
2734                         ph_state_irq(hc, r_irq_statech);
2735         }
2736         if (status & V_EXT_IRQSTA)
2737                 ; /* external IRQ */
2738         if (status & V_LOST_STA) {
2739                 /* LOST IRQ */
2740                 HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
2741         }
2742         if (status & V_MISC_IRQSTA) {
2743                 /* misc IRQ */
2744                 r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
2745                 r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
2746                 if (r_irq_misc & V_STA_IRQ) {
2747                         if (hc->ctype == HFC_TYPE_E1) {
2748                                 /* state machine */
2749                                 dch = hc->chan[hc->dslot].dch;
2750                                 e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
2751                                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
2752                                  && hc->e1_getclock) {
2753                                         if (e1_syncsta & V_FR_SYNC_E1)
2754                                                 hc->syncronized = 1;
2755                                         else
2756                                                 hc->syncronized = 0;
2757                                 }
2758                                 /* undocumented: status changes during read */
2759                                 dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
2760                                 while (dch->state != (temp =
2761                                         HFC_inb_nodebug(hc, R_E1_RD_STA))) {
2762                                         if (debug & DEBUG_HFCMULTI_STATE)
2763                                                 printk(KERN_DEBUG "%s: reread "
2764                                                     "STATE because %d!=%d\n",
2765                                                     __func__, temp,
2766                                                     dch->state);
2767                                         dch->state = temp; /* repeat */
2768                                 }
2769                                 dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
2770                                         & 0x7;
2771                                 schedule_event(dch, FLG_PHCHANGE);
2772                                 if (debug & DEBUG_HFCMULTI_STATE)
2773                                         printk(KERN_DEBUG
2774                                             "%s: E1 (id=%d) newstate %x\n",
2775                                             __func__, hc->id, dch->state);
2776                                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
2777                                         plxsd_checksync(hc, 0);
2778                         }
2779                 }
2780                 if (r_irq_misc & V_TI_IRQ) {
2781                         if (hc->iclock_on)
2782                                 mISDN_clock_update(hc->iclock, poll, NULL);
2783                         handle_timer_irq(hc);
2784                 }
2785
2786                 if (r_irq_misc & V_DTMF_IRQ)
2787                         hfcmulti_dtmf(hc);
2788
2789                 if (r_irq_misc & V_IRQ_PROC) {
2790                         static int irq_proc_cnt;
2791                         if (!irq_proc_cnt++)
2792                                 printk(KERN_DEBUG "%s: got V_IRQ_PROC -"
2793                                     " this should not happen\n", __func__);
2794                 }
2795
2796         }
2797         if (status & V_FR_IRQSTA) {
2798                 /* FIFO IRQ */
2799                 r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
2800                 for (i = 0; i < 8; i++) {
2801                         if (r_irq_oview & (1 << i))
2802                                 fifo_irq(hc, i);
2803                 }
2804         }
2805
2806 #ifdef IRQ_DEBUG
2807         irqsem = 0;
2808 #endif
2809         spin_unlock(&hc->lock);
2810         return IRQ_HANDLED;
2811
2812 irq_notforus:
2813 #ifdef IRQ_DEBUG
2814         irqsem = 0;
2815 #endif
2816         spin_unlock(&hc->lock);
2817         return IRQ_NONE;
2818 }
2819
2820
2821 /*
2822  * timer callback for D-chan busy resolution. Currently no function
2823  */
2824
2825 static void
2826 hfcmulti_dbusy_timer(struct hfc_multi *hc)
2827 {
2828 }
2829
2830
2831 /*
2832  * activate/deactivate hardware for selected channels and mode
2833  *
2834  * configure B-channel with the given protocol
2835  * ch eqals to the HFC-channel (0-31)
2836  * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
2837  * for S/T, 1-31 for E1)
2838  * the hdlc interrupts will be set/unset
2839  */
2840 static int
2841 mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
2842     int bank_tx, int slot_rx, int bank_rx)
2843 {
2844         int flow_tx = 0, flow_rx = 0, routing = 0;
2845         int oslot_tx, oslot_rx;
2846         int conf;
2847
2848         if (ch < 0 || ch > 31)
2849                 return EINVAL;
2850         oslot_tx = hc->chan[ch].slot_tx;
2851         oslot_rx = hc->chan[ch].slot_rx;
2852         conf = hc->chan[ch].conf;
2853
2854         if (debug & DEBUG_HFCMULTI_MODE)
2855                 printk(KERN_DEBUG
2856                     "%s: card %d channel %d protocol %x slot old=%d new=%d "
2857                     "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
2858                     __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
2859                     bank_tx, oslot_rx, slot_rx, bank_rx);
2860
2861         if (oslot_tx >= 0 && slot_tx != oslot_tx) {
2862                 /* remove from slot */
2863                 if (debug & DEBUG_HFCMULTI_MODE)
2864                         printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
2865                             __func__, oslot_tx);
2866                 if (hc->slot_owner[oslot_tx<<1] == ch) {
2867                         HFC_outb(hc, R_SLOT, oslot_tx << 1);
2868                         HFC_outb(hc, A_SL_CFG, 0);
2869                         if (hc->ctype != HFC_TYPE_XHFC)
2870                                 HFC_outb(hc, A_CONF, 0);
2871                         hc->slot_owner[oslot_tx<<1] = -1;
2872                 } else {
2873                         if (debug & DEBUG_HFCMULTI_MODE)
2874                                 printk(KERN_DEBUG
2875                                     "%s: we are not owner of this tx slot "
2876                                     "anymore, channel %d is.\n",
2877                                     __func__, hc->slot_owner[oslot_tx<<1]);
2878                 }
2879         }
2880
2881         if (oslot_rx >= 0 && slot_rx != oslot_rx) {
2882                 /* remove from slot */
2883                 if (debug & DEBUG_HFCMULTI_MODE)
2884                         printk(KERN_DEBUG
2885                             "%s: remove from slot %d (RX)\n",
2886                             __func__, oslot_rx);
2887                 if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
2888                         HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
2889                         HFC_outb(hc, A_SL_CFG, 0);
2890                         hc->slot_owner[(oslot_rx << 1) | 1] = -1;
2891                 } else {
2892                         if (debug & DEBUG_HFCMULTI_MODE)
2893                                 printk(KERN_DEBUG
2894                                     "%s: we are not owner of this rx slot "
2895                                     "anymore, channel %d is.\n",
2896                                     __func__,
2897                                     hc->slot_owner[(oslot_rx << 1) | 1]);
2898                 }
2899         }
2900
2901         if (slot_tx < 0) {
2902                 flow_tx = 0x80; /* FIFO->ST */
2903                 /* disable pcm slot */
2904                 hc->chan[ch].slot_tx = -1;
2905                 hc->chan[ch].bank_tx = 0;
2906         } else {
2907                 /* set pcm slot */
2908                 if (hc->chan[ch].txpending)
2909                         flow_tx = 0x80; /* FIFO->ST */
2910                 else
2911                         flow_tx = 0xc0; /* PCM->ST */
2912                 /* put on slot */
2913                 routing = bank_tx ? 0xc0 : 0x80;
2914                 if (conf >= 0 || bank_tx > 1)
2915                         routing = 0x40; /* loop */
2916                 if (debug & DEBUG_HFCMULTI_MODE)
2917                         printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
2918                             " %d flow %02x routing %02x conf %d (TX)\n",
2919                             __func__, ch, slot_tx, bank_tx,
2920                             flow_tx, routing, conf);
2921                 HFC_outb(hc, R_SLOT, slot_tx << 1);
2922                 HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
2923                 if (hc->ctype != HFC_TYPE_XHFC)
2924                         HFC_outb(hc, A_CONF,
2925                                 (conf < 0) ? 0 : (conf | V_CONF_SL));
2926                 hc->slot_owner[slot_tx << 1] = ch;
2927                 hc->chan[ch].slot_tx = slot_tx;
2928                 hc->chan[ch].bank_tx = bank_tx;
2929         }
2930         if (slot_rx < 0) {
2931                 /* disable pcm slot */
2932                 flow_rx = 0x80; /* ST->FIFO */
2933                 hc->chan[ch].slot_rx = -1;
2934                 hc->chan[ch].bank_rx = 0;
2935         } else {
2936                 /* set pcm slot */
2937                 if (hc->chan[ch].txpending)
2938                         flow_rx = 0x80; /* ST->FIFO */
2939                 else
2940                         flow_rx = 0xc0; /* ST->(FIFO,PCM) */
2941                 /* put on slot */
2942                 routing = bank_rx ? 0x80 : 0xc0; /* reversed */
2943                 if (conf >= 0 || bank_rx > 1)
2944                         routing = 0x40; /* loop */
2945                 if (debug & DEBUG_HFCMULTI_MODE)
2946                         printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
2947                             " %d flow %02x routing %02x conf %d (RX)\n",
2948                             __func__, ch, slot_rx, bank_rx,
2949                             flow_rx, routing, conf);
2950                 HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
2951                 HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
2952                 hc->slot_owner[(slot_rx<<1)|1] = ch;
2953                 hc->chan[ch].slot_rx = slot_rx;
2954                 hc->chan[ch].bank_rx = bank_rx;
2955         }
2956
2957         switch (protocol) {
2958         case (ISDN_P_NONE):
2959                 /* disable TX fifo */
2960                 HFC_outb(hc, R_FIFO, ch << 1);
2961                 HFC_wait(hc);
2962                 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
2963                 HFC_outb(hc, A_SUBCH_CFG, 0);
2964                 HFC_outb(hc, A_IRQ_MSK, 0);
2965                 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2966                 HFC_wait(hc);
2967                 /* disable RX fifo */
2968                 HFC_outb(hc, R_FIFO, (ch<<1)|1);
2969                 HFC_wait(hc);
2970                 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
2971                 HFC_outb(hc, A_SUBCH_CFG, 0);
2972                 HFC_outb(hc, A_IRQ_MSK, 0);
2973                 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2974                 HFC_wait(hc);
2975                 if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) {
2976                         hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
2977                             ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN;
2978                         HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
2979                         /* undocumented: delay after R_ST_SEL */
2980                         udelay(1);
2981                         HFC_outb(hc, A_ST_CTRL0,
2982                             hc->hw.a_st_ctrl0[hc->chan[ch].port]);
2983                 }
2984                 if (hc->chan[ch].bch) {
2985                         test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
2986                         test_and_clear_bit(FLG_TRANSPARENT,
2987                             &hc->chan[ch].bch->Flags);
2988                 }
2989                 break;
2990         case (ISDN_P_B_RAW): /* B-channel */
2991
2992                 if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
2993                     (hc->chan[ch].slot_rx < 0) &&
2994                     (hc->chan[ch].slot_tx < 0)) {
2995
2996                         printk(KERN_DEBUG
2997                             "Setting B-channel %d to echo cancelable "
2998                             "state on PCM slot %d\n", ch,
2999                             ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
3000                         printk(KERN_DEBUG
3001                             "Enabling pass through for channel\n");
3002                         vpm_out(hc, ch, ((ch / 4) * 8) +
3003                             ((ch % 4) * 4) + 1, 0x01);
3004                         /* rx path */
3005                         /* S/T -> PCM */
3006                         HFC_outb(hc, R_FIFO, (ch << 1));
3007                         HFC_wait(hc);
3008                         HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
3009                         HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
3010                             ((ch % 4) * 4) + 1) << 1);
3011                         HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
3012
3013                         /* PCM -> FIFO */
3014                         HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
3015                         HFC_wait(hc);
3016                         HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
3017                         HFC_outb(hc, A_SUBCH_CFG, 0);
3018                         HFC_outb(hc, A_IRQ_MSK, 0);
3019                         HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3020                         HFC_wait(hc);
3021                         HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
3022                             ((ch % 4) * 4) + 1) << 1) | 1);
3023                         HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
3024
3025                         /* tx path */
3026                         /* PCM -> S/T */
3027                         HFC_outb(hc, R_FIFO, (ch << 1) | 1);
3028                         HFC_wait(hc);
3029                         HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
3030                         HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
3031                             ((ch % 4) * 4)) << 1) | 1);
3032                         HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
3033
3034                         /* FIFO -> PCM */
3035                         HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
3036                         HFC_wait(hc);
3037                         HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
3038                         HFC_outb(hc, A_SUBCH_CFG, 0);
3039                         HFC_outb(hc, A_IRQ_MSK, 0);
3040                         HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3041                         HFC_wait(hc);
3042                         /* tx silence */
3043                         HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
3044                         HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
3045                             ((ch % 4) * 4)) << 1);
3046                         HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
3047                 } else {
3048                         /* enable TX fifo */
3049                         HFC_outb(hc, R_FIFO, ch << 1);
3050                         HFC_wait(hc);
3051                         if (hc->ctype == HFC_TYPE_XHFC)
3052                                 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 |
3053                                         V_HDLC_TRP | V_IFF);
3054                                         /* Enable FIFO, no interrupt */
3055                         else
3056                                 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
3057                                         V_HDLC_TRP | V_IFF);
3058                         HFC_outb(hc, A_SUBCH_CFG, 0);
3059                         HFC_outb(hc, A_IRQ_MSK, 0);
3060                         HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3061                         HFC_wait(hc);
3062                         /* tx silence */
3063                         HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
3064                         /* enable RX fifo */
3065                         HFC_outb(hc, R_FIFO, (ch<<1)|1);
3066                         HFC_wait(hc);
3067                         if (hc->ctype == HFC_TYPE_XHFC)
3068                                 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 |
3069                                         V_HDLC_TRP);
3070                                         /* Enable FIFO, no interrupt*/
3071                         else
3072                                 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 |
3073                                                 V_HDLC_TRP);
3074                         HFC_outb(hc, A_SUBCH_CFG, 0);
3075                         HFC_outb(hc, A_IRQ_MSK, 0);
3076                         HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3077                         HFC_wait(hc);
3078                 }
3079                 if (hc->ctype != HFC_TYPE_E1) {
3080                         hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
3081                             ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
3082                         HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
3083                         /* undocumented: delay after R_ST_SEL */
3084                         udelay(1);
3085                         HFC_outb(hc, A_ST_CTRL0,
3086                             hc->hw.a_st_ctrl0[hc->chan[ch].port]);
3087                 }
3088                 if (hc->chan[ch].bch)
3089                         test_and_set_bit(FLG_TRANSPARENT,
3090                             &hc->chan[ch].bch->Flags);
3091                 break;
3092         case (ISDN_P_B_HDLC): /* B-channel */
3093         case (ISDN_P_TE_S0): /* D-channel */
3094         case (ISDN_P_NT_S0):
3095         case (ISDN_P_TE_E1):
3096         case (ISDN_P_NT_E1):
3097                 /* enable TX fifo */
3098                 HFC_outb(hc, R_FIFO, ch<<1);
3099                 HFC_wait(hc);
3100                 if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) {
3101                         /* E1 or B-channel */
3102                         HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
3103                         HFC_outb(hc, A_SUBCH_CFG, 0);
3104                 } else {
3105                         /* D-Channel without HDLC fill flags */
3106                         HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
3107                         HFC_outb(hc, A_SUBCH_CFG, 2);
3108                 }
3109                 HFC_outb(hc, A_IRQ_MSK, V_IRQ);
3110                 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3111                 HFC_wait(hc);
3112                 /* enable RX fifo */
3113                 HFC_outb(hc, R_FIFO, (ch<<1)|1);
3114                 HFC_wait(hc);
3115                 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
3116                 if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch)
3117                         HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
3118                 else
3119                         HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
3120                 HFC_outb(hc, A_IRQ_MSK, V_IRQ);
3121                 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3122                 HFC_wait(hc);
3123                 if (hc->chan[ch].bch) {
3124                         test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
3125                         if (hc->ctype != HFC_TYPE_E1) {
3126                                 hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
3127                                   ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
3128                                 HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
3129                                 /* undocumented: delay after R_ST_SEL */
3130                                 udelay(1);
3131                                 HFC_outb(hc, A_ST_CTRL0,
3132                                   hc->hw.a_st_ctrl0[hc->chan[ch].port]);
3133                         }
3134                 }
3135                 break;
3136         default:
3137                 printk(KERN_DEBUG "%s: protocol not known %x\n",
3138                     __func__, protocol);
3139                 hc->chan[ch].protocol = ISDN_P_NONE;
3140                 return -ENOPROTOOPT;
3141         }
3142         hc->chan[ch].protocol = protocol;
3143         return 0;
3144 }
3145
3146
3147 /*
3148  * connect/disconnect PCM
3149  */
3150
3151 static void
3152 hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
3153     int slot_rx, int bank_rx)
3154 {
3155         if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
3156                 /* disable PCM */
3157                 mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
3158                 return;
3159         }
3160
3161         /* enable pcm */
3162         mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
3163                 slot_rx, bank_rx);
3164 }
3165
3166 /*
3167  * set/disable conference
3168  */
3169
3170 static void
3171 hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
3172 {
3173         if (num >= 0 && num <= 7)
3174                 hc->chan[ch].conf = num;
3175         else
3176                 hc->chan[ch].conf = -1;
3177         mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
3178             hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
3179             hc->chan[ch].bank_rx);
3180 }
3181
3182
3183 /*
3184  * set/disable sample loop
3185  */
3186
3187 /* NOTE: this function is experimental and therefore disabled */
3188
3189 /*
3190  * Layer 1 callback function
3191  */
3192 static int
3193 hfcm_l1callback(struct dchannel *dch, u_int cmd)
3194 {
3195         struct hfc_multi        *hc = dch->hw;
3196         u_long  flags;
3197
3198         switch (cmd) {
3199         case INFO3_P8:
3200         case INFO3_P10:
3201                 break;
3202         case HW_RESET_REQ:
3203                 /* start activation */
3204                 spin_lock_irqsave(&hc->lock, flags);
3205                 if (hc->ctype == HFC_TYPE_E1) {
3206                         if (debug & DEBUG_HFCMULTI_MSG)
3207                                 printk(KERN_DEBUG
3208                                     "%s: HW_RESET_REQ no BRI\n",
3209                                     __func__);
3210                 } else {
3211                         HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3212                         /* undocumented: delay after R_ST_SEL */
3213                         udelay(1);
3214                         HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
3215                         udelay(6); /* wait at least 5,21us */
3216                         HFC_outb(hc, A_ST_WR_STATE, 3);
3217                         HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
3218                                 /* activate */
3219                 }
3220                 spin_unlock_irqrestore(&hc->lock, flags);
3221                 l1_event(dch->l1, HW_POWERUP_IND);
3222                 break;
3223         case HW_DEACT_REQ:
3224                 /* start deactivation */
3225                 spin_lock_irqsave(&hc->lock, flags);
3226                 if (hc->ctype == HFC_TYPE_E1) {
3227                         if (debug & DEBUG_HFCMULTI_MSG)
3228                                 printk(KERN_DEBUG
3229                                     "%s: HW_DEACT_REQ no BRI\n",
3230                                     __func__);
3231                 } else {
3232                         HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3233                         /* undocumented: delay after R_ST_SEL */
3234                         udelay(1);
3235                         HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
3236                                 /* deactivate */
3237                         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
3238                                 hc->syncronized &=
3239                                    ~(1 << hc->chan[dch->slot].port);
3240                                 plxsd_checksync(hc, 0);
3241                         }
3242                 }
3243                 skb_queue_purge(&dch->squeue);
3244                 if (dch->tx_skb) {
3245                         dev_kfree_skb(dch->tx_skb);
3246                         dch->tx_skb = NULL;
3247                 }
3248                 dch->tx_idx = 0;
3249                 if (dch->rx_skb) {
3250                         dev_kfree_skb(dch->rx_skb);
3251                         dch->rx_skb = NULL;
3252                 }
3253                 test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
3254                 if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
3255                         del_timer(&dch->timer);
3256                 spin_unlock_irqrestore(&hc->lock, flags);
3257                 break;
3258         case HW_POWERUP_REQ:
3259                 spin_lock_irqsave(&hc->lock, flags);
3260                 if (hc->ctype == HFC_TYPE_E1) {
3261                         if (debug & DEBUG_HFCMULTI_MSG)
3262                                 printk(KERN_DEBUG
3263                                     "%s: HW_POWERUP_REQ no BRI\n",
3264                                     __func__);
3265                 } else {
3266                         HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3267                         /* undocumented: delay after R_ST_SEL */
3268                         udelay(1);
3269                         HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
3270                         udelay(6); /* wait at least 5,21us */
3271                         HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
3272                 }
3273                 spin_unlock_irqrestore(&hc->lock, flags);
3274                 break;
3275         case PH_ACTIVATE_IND:
3276                 test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3277                 _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
3278                         GFP_ATOMIC);
3279                 break;
3280         case PH_DEACTIVATE_IND:
3281                 test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3282                 _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
3283                         GFP_ATOMIC);
3284                 break;
3285         default:
3286                 if (dch->debug & DEBUG_HW)
3287                         printk(KERN_DEBUG "%s: unknown command %x\n",
3288                             __func__, cmd);
3289                 return -1;
3290         }
3291         return 0;
3292 }
3293
3294 /*
3295  * Layer2 -> Layer 1 Transfer
3296  */
3297
3298 static int
3299 handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
3300 {
3301         struct mISDNdevice      *dev = container_of(ch, struct mISDNdevice, D);
3302         struct dchannel         *dch = container_of(dev, struct dchannel, dev);
3303         struct hfc_multi        *hc = dch->hw;
3304         struct mISDNhead        *hh = mISDN_HEAD_P(skb);
3305         int                     ret = -EINVAL;
3306         unsigned int            id;
3307         u_long                  flags;
3308
3309         switch (hh->prim) {
3310         case PH_DATA_REQ:
3311                 if (skb->len < 1)
3312                         break;
3313                 spin_lock_irqsave(&hc->lock, flags);
3314                 ret = dchannel_senddata(dch, skb);
3315                 if (ret > 0) { /* direct TX */
3316                         id = hh->id; /* skb can be freed */
3317                         hfcmulti_tx(hc, dch->slot);
3318                         ret = 0;
3319                         /* start fifo */
3320                         HFC_outb(hc, R_FIFO, 0);
3321                         HFC_wait(hc);
3322                         spin_unlock_irqrestore(&hc->lock, flags);
3323                         queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
3324                 } else
3325                         spin_unlock_irqrestore(&hc->lock, flags);
3326                 return ret;
3327         case PH_ACTIVATE_REQ:
3328                 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
3329                         spin_lock_irqsave(&hc->lock, flags);
3330                         ret = 0;
3331                         if (debug & DEBUG_HFCMULTI_MSG)
3332                                 printk(KERN_DEBUG
3333                                     "%s: PH_ACTIVATE port %d (0..%d)\n",
3334                                     __func__, hc->chan[dch->slot].port,
3335                                     hc->ports-1);
3336                         /* start activation */
3337                         if (hc->ctype == HFC_TYPE_E1) {
3338                                 ph_state_change(dch);
3339                                 if (debug & DEBUG_HFCMULTI_STATE)
3340                                         printk(KERN_DEBUG
3341                                             "%s: E1 report state %x \n",
3342                                             __func__, dch->state);
3343                         } else {
3344                                 HFC_outb(hc, R_ST_SEL,
3345                                     hc->chan[dch->slot].port);
3346                                 /* undocumented: delay after R_ST_SEL */
3347                                 udelay(1);
3348                                 HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
3349                                     /* G1 */
3350                                 udelay(6); /* wait at least 5,21us */
3351                                 HFC_outb(hc, A_ST_WR_STATE, 1);
3352                                 HFC_outb(hc, A_ST_WR_STATE, 1 |
3353                                     (V_ST_ACT*3)); /* activate */
3354                                 dch->state = 1;
3355                         }
3356                         spin_unlock_irqrestore(&hc->lock, flags);
3357                 } else
3358                         ret = l1_event(dch->l1, hh->prim);
3359                 break;
3360         case PH_DEACTIVATE_REQ:
3361                 test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
3362                 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
3363                         spin_lock_irqsave(&hc->lock, flags);
3364                         if (debug & DEBUG_HFCMULTI_MSG)
3365                                 printk(KERN_DEBUG
3366                                     "%s: PH_DEACTIVATE port %d (0..%d)\n",
3367                                     __func__, hc->chan[dch->slot].port,
3368                                     hc->ports-1);
3369                         /* start deactivation */
3370                         if (hc->ctype == HFC_TYPE_E1) {
3371                                 if (debug & DEBUG_HFCMULTI_MSG)
3372                                         printk(KERN_DEBUG
3373                                             "%s: PH_DEACTIVATE no BRI\n",
3374                                             __func__);
3375                         } else {
3376                                 HFC_outb(hc, R_ST_SEL,
3377                                     hc->chan[dch->slot].port);
3378                                 /* undocumented: delay after R_ST_SEL */
3379                                 udelay(1);
3380                                 HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
3381                                     /* deactivate */
3382                                 dch->state = 1;
3383                         }
3384                         skb_queue_purge(&dch->squeue);
3385                         if (dch->tx_skb) {
3386                                 dev_kfree_skb(dch->tx_skb);
3387                                 dch->tx_skb = NULL;
3388                         }
3389                         dch->tx_idx = 0;
3390                         if (dch->rx_skb) {
3391                                 dev_kfree_skb(dch->rx_skb);
3392                                 dch->rx_skb = NULL;
3393                         }
3394                         test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
3395                         if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
3396                                 del_timer(&dch->timer);
3397 #ifdef FIXME
3398                         if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
3399                                 dchannel_sched_event(&hc->dch, D_CLEARBUSY);
3400 #endif
3401                         ret = 0;
3402                         spin_unlock_irqrestore(&hc->lock, flags);
3403                 } else
3404                         ret = l1_event(dch->l1, hh->prim);
3405                 break;
3406         }
3407         if (!ret)
3408                 dev_kfree_skb(skb);
3409         return ret;
3410 }
3411
3412 static void
3413 deactivate_bchannel(struct bchannel *bch)
3414 {
3415         struct hfc_multi        *hc = bch->hw;
3416         u_long                  flags;
3417
3418         spin_lock_irqsave(&hc->lock, flags);
3419         mISDN_clear_bchannel(bch);
3420         hc->chan[bch->slot].coeff_count = 0;
3421         hc->chan[bch->slot].rx_off = 0;
3422         hc->chan[bch->slot].conf = -1;
3423         mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
3424         spin_unlock_irqrestore(&hc->lock, flags);
3425 }
3426
3427 static int
3428 handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
3429 {
3430         struct bchannel         *bch = container_of(ch, struct bchannel, ch);
3431         struct hfc_multi        *hc = bch->hw;
3432         int                     ret = -EINVAL;
3433         struct mISDNhead        *hh = mISDN_HEAD_P(skb);
3434         unsigned int            id;
3435         u_long                  flags;
3436
3437         switch (hh->prim) {
3438         case PH_DATA_REQ:
3439                 if (!skb->len)
3440                         break;
3441                 spin_lock_irqsave(&hc->lock, flags);
3442                 ret = bchannel_senddata(bch, skb);
3443                 if (ret > 0) { /* direct TX */
3444                         id = hh->id; /* skb can be freed */
3445                         hfcmulti_tx(hc, bch->slot);
3446                         ret = 0;
3447                         /* start fifo */
3448                         HFC_outb_nodebug(hc, R_FIFO, 0);
3449                         HFC_wait_nodebug(hc);
3450                         if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
3451                                 spin_unlock_irqrestore(&hc->lock, flags);
3452                                 queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
3453                         } else
3454                                 spin_unlock_irqrestore(&hc->lock, flags);
3455                 } else
3456                         spin_unlock_irqrestore(&hc->lock, flags);
3457                 return ret;
3458         case PH_ACTIVATE_REQ:
3459                 if (debug & DEBUG_HFCMULTI_MSG)
3460                         printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
3461                                 __func__, bch->slot);
3462                 spin_lock_irqsave(&hc->lock, flags);
3463                 /* activate B-channel if not already activated */
3464                 if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
3465                         hc->chan[bch->slot].txpending = 0;
3466                         ret = mode_hfcmulti(hc, bch->slot,
3467                                 ch->protocol,
3468                                 hc->chan[bch->slot].slot_tx,
3469                                 hc->chan[bch->slot].bank_tx,
3470                                 hc->chan[bch->slot].slot_rx,
3471                                 hc->chan[bch->slot].bank_rx);
3472                         if (!ret) {
3473                                 if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
3474                                         && test_bit(HFC_CHIP_DTMF, &hc->chip)) {
3475                                         /* start decoder */
3476                                         hc->dtmf = 1;
3477                                         if (debug & DEBUG_HFCMULTI_DTMF)
3478                                                 printk(KERN_DEBUG
3479                                                     "%s: start dtmf decoder\n",
3480                                                         __func__);
3481                                         HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
3482                                             V_RST_DTMF);
3483                                 }
3484                         }
3485                 } else
3486                         ret = 0;
3487                 spin_unlock_irqrestore(&hc->lock, flags);
3488                 if (!ret)
3489                         _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
3490                                 GFP_KERNEL);
3491                 break;
3492         case PH_CONTROL_REQ:
3493                 spin_lock_irqsave(&hc->lock, flags);
3494                 switch (hh->id) {
3495                 case HFC_SPL_LOOP_ON: /* set sample loop */
3496                         if (debug & DEBUG_HFCMULTI_MSG)
3497                                 printk(KERN_DEBUG
3498                                     "%s: HFC_SPL_LOOP_ON (len = %d)\n",
3499                                     __func__, skb->len);
3500                         ret = 0;
3501                         break;
3502                 case HFC_SPL_LOOP_OFF: /* set silence */
3503                         if (debug & DEBUG_HFCMULTI_MSG)
3504                                 printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
3505                                     __func__);
3506                         ret = 0;
3507                         break;
3508                 default:
3509                         printk(KERN_ERR
3510                              "%s: unknown PH_CONTROL_REQ info %x\n",
3511                              __func__, hh->id);
3512                         ret = -EINVAL;
3513                 }
3514                 spin_unlock_irqrestore(&hc->lock, flags);
3515                 break;
3516         case PH_DEACTIVATE_REQ:
3517                 deactivate_bchannel(bch); /* locked there */
3518                 _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
3519                         GFP_KERNEL);
3520                 ret = 0;
3521                 break;
3522         }
3523         if (!ret)
3524                 dev_kfree_skb(skb);
3525         return ret;
3526 }
3527
3528 /*
3529  * bchannel control function
3530  */
3531 static int
3532 channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
3533 {
3534         int                     ret = 0;
3535         struct dsp_features     *features =
3536                 (struct dsp_features *)(*((u_long *)&cq->p1));
3537         struct hfc_multi        *hc = bch->hw;
3538         int                     slot_tx;
3539         int                     bank_tx;
3540         int                     slot_rx;
3541         int                     bank_rx;
3542         int                     num;
3543
3544         switch (cq->op) {
3545         case MISDN_CTRL_GETOP:
3546                 cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
3547                         | MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY;
3548                 break;
3549         case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
3550                 hc->chan[bch->slot].rx_off = !!cq->p1;
3551                 if (!hc->chan[bch->slot].rx_off) {
3552                         /* reset fifo on rx on */
3553                         HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
3554                         HFC_wait_nodebug(hc);
3555                         HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
3556                         HFC_wait_nodebug(hc);
3557                 }
3558                 if (debug & DEBUG_HFCMULTI_MSG)
3559                         printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
3560                             __func__, bch->nr, hc->chan[bch->slot].rx_off);
3561                 break;
3562         case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */
3563                 test_and_set_bit(FLG_FILLEMPTY, &bch->Flags);
3564                 if (debug & DEBUG_HFCMULTI_MSG)
3565                         printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d "
3566                                 "off=%d)\n", __func__, bch->nr, !!cq->p1);
3567                 break;
3568         case MISDN_CTRL_HW_FEATURES: /* fill features structure */
3569                 if (debug & DEBUG_HFCMULTI_MSG)
3570                         printk(KERN_DEBUG "%s: HW_FEATURE request\n",
3571                             __func__);
3572                 /* create confirm */
3573                 features->hfc_id = hc->id;
3574                 if (test_bit(HFC_CHIP_DTMF, &hc->chip))
3575                         features->hfc_dtmf = 1;
3576                 if (test_bit(HFC_CHIP_CONF, &hc->chip))
3577                         features->hfc_conf = 1;
3578                 features->hfc_loops = 0;
3579                 if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
3580                         features->hfc_echocanhw = 1;
3581                 } else {
3582                         features->pcm_id = hc->pcm;
3583                         features->pcm_slots = hc->slots;
3584                         features->pcm_banks = 2;
3585                 }
3586                 break;
3587         case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
3588                 slot_tx = cq->p1 & 0xff;
3589                 bank_tx = cq->p1 >> 8;
3590                 slot_rx = cq->p2 & 0xff;
3591                 bank_rx = cq->p2 >> 8;
3592                 if (debug & DEBUG_HFCMULTI_MSG)
3593                         printk(KERN_DEBUG
3594                             "%s: HFC_PCM_CONN slot %d bank %d (TX) "
3595                             "slot %d bank %d (RX)\n",
3596                             __func__, slot_tx, bank_tx,
3597                             slot_rx, bank_rx);
3598                 if (slot_tx < hc->slots && bank_tx <= 2 &&
3599                     slot_rx < hc->slots && bank_rx <= 2)
3600                         hfcmulti_pcm(hc, bch->slot,
3601                             slot_tx, bank_tx, slot_rx, bank_rx);
3602                 else {
3603                         printk(KERN_WARNING
3604                             "%s: HFC_PCM_CONN slot %d bank %d (TX) "
3605                             "slot %d bank %d (RX) out of range\n",
3606                             __func__, slot_tx, bank_tx,
3607                             slot_rx, bank_rx);
3608                         ret = -EINVAL;
3609                 }
3610                 break;
3611         case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
3612                 if (debug & DEBUG_HFCMULTI_MSG)
3613                         printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
3614                             __func__);
3615                 hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
3616                 break;
3617         case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
3618                 num = cq->p1 & 0xff;
3619                 if (debug & DEBUG_HFCMULTI_MSG)
3620                         printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
3621                             __func__, num);
3622                 if (num <= 7)
3623                         hfcmulti_conf(hc, bch->slot, num);
3624                 else {
3625                         printk(KERN_WARNING
3626                             "%s: HW_CONF_JOIN conf %d out of range\n",
3627                             __func__, num);
3628                         ret = -EINVAL;
3629                 }
3630                 break;
3631         case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
3632                 if (debug & DEBUG_HFCMULTI_MSG)
3633                         printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
3634                 hfcmulti_conf(hc, bch->slot, -1);
3635                 break;
3636         case MISDN_CTRL_HFC_ECHOCAN_ON:
3637                 if (debug & DEBUG_HFCMULTI_MSG)
3638                         printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
3639                 if (test_bit(HFC_CHIP_B410P, &hc->chip))
3640                         vpm_echocan_on(hc, bch->slot, cq->p1);
3641                 else
3642                         ret = -EINVAL;
3643                 break;
3644
3645         case MISDN_CTRL_HFC_ECHOCAN_OFF:
3646                 if (debug & DEBUG_HFCMULTI_MSG)
3647                         printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
3648                                 __func__);
3649                 if (test_bit(HFC_CHIP_B410P, &hc->chip))
3650                         vpm_echocan_off(hc, bch->slot);
3651                 else
3652                         ret = -EINVAL;
3653                 break;
3654         default:
3655                 printk(KERN_WARNING "%s: unknown Op %x\n",
3656                     __func__, cq->op);
3657                 ret = -EINVAL;
3658                 break;
3659         }
3660         return ret;
3661 }
3662
3663 static int
3664 hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
3665 {
3666         struct bchannel         *bch = container_of(ch, struct bchannel, ch);
3667         struct hfc_multi        *hc = bch->hw;
3668         int                     err = -EINVAL;
3669         u_long  flags;
3670
3671         if (bch->debug & DEBUG_HW)
3672                 printk(KERN_DEBUG "%s: cmd:%x %p\n",
3673                     __func__, cmd, arg);
3674         switch (cmd) {
3675         case CLOSE_CHANNEL:
3676                 test_and_clear_bit(FLG_OPEN, &bch->Flags);
3677                 if (test_bit(FLG_ACTIVE, &bch->Flags))
3678                         deactivate_bchannel(bch); /* locked there */
3679                 ch->protocol = ISDN_P_NONE;
3680                 ch->peer = NULL;
3681                 module_put(THIS_MODULE);
3682                 err = 0;
3683                 break;
3684         case CONTROL_CHANNEL:
3685                 spin_lock_irqsave(&hc->lock, flags);
3686                 err = channel_bctrl(bch, arg);
3687                 spin_unlock_irqrestore(&hc->lock, flags);
3688                 break;
3689         default:
3690                 printk(KERN_WARNING "%s: unknown prim(%x)\n",
3691                         __func__, cmd);
3692         }
3693         return err;
3694 }
3695
3696 /*
3697  * handle D-channel events
3698  *
3699  * handle state change event
3700  */
3701 static void
3702 ph_state_change(struct dchannel *dch)
3703 {
3704         struct hfc_multi *hc;
3705         int ch, i;
3706
3707         if (!dch) {
3708                 printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__);
3709                 return;
3710         }
3711         hc = dch->hw;
3712         ch = dch->slot;
3713
3714         if (hc->ctype == HFC_TYPE_E1) {
3715                 if (dch->dev.D.protocol == ISDN_P_TE_E1) {
3716                         if (debug & DEBUG_HFCMULTI_STATE)
3717                                 printk(KERN_DEBUG
3718                                     "%s: E1 TE (id=%d) newstate %x\n",
3719                                     __func__, hc->id, dch->state);
3720                 } else {
3721                         if (debug & DEBUG_HFCMULTI_STATE)
3722                                 printk(KERN_DEBUG
3723                                     "%s: E1 NT (id=%d) newstate %x\n",
3724                                     __func__, hc->id, dch->state);
3725                 }
3726                 switch (dch->state) {
3727                 case (1):
3728                         if (hc->e1_state != 1) {
3729                                 for (i = 1; i <= 31; i++) {
3730                                         /* reset fifos on e1 activation */
3731                                         HFC_outb_nodebug(hc, R_FIFO,
3732                                                 (i << 1) | 1);
3733                                         HFC_wait_nodebug(hc);
3734                                         HFC_outb_nodebug(hc, R_INC_RES_FIFO,
3735                                                 V_RES_F);
3736                                         HFC_wait_nodebug(hc);
3737                                 }
3738                         }
3739                         test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3740                         _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
3741                             MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3742                         break;
3743
3744                 default:
3745                         if (hc->e1_state != 1)
3746                                 return;
3747                         test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3748                         _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
3749                             MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3750                 }
3751                 hc->e1_state = dch->state;
3752         } else {
3753                 if (dch->dev.D.protocol == ISDN_P_TE_S0) {
3754                         if (debug & DEBUG_HFCMULTI_STATE)
3755                                 printk(KERN_DEBUG
3756                                     "%s: S/T TE newstate %x\n",
3757                                     __func__, dch->state);
3758                         switch (dch->state) {
3759                         case (0):
3760                                 l1_event(dch->l1, HW_RESET_IND);
3761                                 break;
3762                         case (3):
3763                                 l1_event(dch->l1, HW_DEACT_IND);
3764                                 break;
3765                         case (5):
3766                         case (8):
3767                                 l1_event(dch->l1, ANYSIGNAL);
3768                                 break;
3769                         case (6):
3770                                 l1_event(dch->l1, INFO2);
3771                                 break;
3772                         case (7):
3773                                 l1_event(dch->l1, INFO4_P8);
3774                                 break;
3775                         }
3776                 } else {
3777                         if (debug & DEBUG_HFCMULTI_STATE)
3778                                 printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
3779                                     __func__, dch->state);
3780                         switch (dch->state) {
3781                         case (2):
3782                                 if (hc->chan[ch].nt_timer == 0) {
3783                                         hc->chan[ch].nt_timer = -1;
3784                                         HFC_outb(hc, R_ST_SEL,
3785                                             hc->chan[ch].port);
3786                                         /* undocumented: delay after R_ST_SEL */
3787                                         udelay(1);
3788                                         HFC_outb(hc, A_ST_WR_STATE, 4 |
3789                                             V_ST_LD_STA); /* G4 */
3790                                         udelay(6); /* wait at least 5,21us */
3791                                         HFC_outb(hc, A_ST_WR_STATE, 4);
3792                                         dch->state = 4;
3793                                 } else {
3794                                         /* one extra count for the next event */
3795                                         hc->chan[ch].nt_timer =
3796                                             nt_t1_count[poll_timer] + 1;
3797                                         HFC_outb(hc, R_ST_SEL,
3798                                             hc->chan[ch].port);
3799                                         /* undocumented: delay after R_ST_SEL */
3800                                         udelay(1);
3801                                         /* allow G2 -> G3 transition */
3802                                         HFC_outb(hc, A_ST_WR_STATE, 2 |
3803                                             V_SET_G2_G3);
3804                                 }
3805                                 break;
3806                         case (1):
3807                                 hc->chan[ch].nt_timer = -1;
3808                                 test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3809                                 _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
3810                                     MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3811                                 break;
3812                         case (4):
3813                                 hc->chan[ch].nt_timer = -1;
3814                                 break;
3815                         case (3):
3816                                 hc->chan[ch].nt_timer = -1;
3817                                 test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3818                                 _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
3819                                     MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3820                                 break;
3821                         }
3822                 }
3823         }
3824 }
3825
3826 /*
3827  * called for card mode init message
3828  */
3829
3830 static void
3831 hfcmulti_initmode(struct dchannel *dch)
3832 {
3833         struct hfc_multi *hc = dch->hw;
3834         u_char          a_st_wr_state, r_e1_wr_sta;
3835         int             i, pt;
3836
3837         if (debug & DEBUG_HFCMULTI_INIT)
3838                 printk(KERN_DEBUG "%s: entered\n", __func__);
3839
3840         if (hc->ctype == HFC_TYPE_E1) {
3841                 hc->chan[hc->dslot].slot_tx = -1;
3842                 hc->chan[hc->dslot].slot_rx = -1;
3843                 hc->chan[hc->dslot].conf = -1;
3844                 if (hc->dslot) {
3845                         mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
3846                                 -1, 0, -1, 0);
3847                         dch->timer.function = (void *) hfcmulti_dbusy_timer;
3848                         dch->timer.data = (long) dch;
3849                         init_timer(&dch->timer);
3850                 }
3851                 for (i = 1; i <= 31; i++) {
3852                         if (i == hc->dslot)
3853                                 continue;
3854                         hc->chan[i].slot_tx = -1;
3855                         hc->chan[i].slot_rx = -1;
3856                         hc->chan[i].conf = -1;
3857                         mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
3858                 }
3859                 /* E1 */
3860                 if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
3861                         HFC_outb(hc, R_LOS0, 255); /* 2 ms */
3862                         HFC_outb(hc, R_LOS1, 255); /* 512 ms */
3863                 }
3864                 if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
3865                         HFC_outb(hc, R_RX0, 0);
3866                         hc->hw.r_tx0 = 0 | V_OUT_EN;
3867                 } else {
3868                         HFC_outb(hc, R_RX0, 1);
3869                         hc->hw.r_tx0 = 1 | V_OUT_EN;
3870                 }
3871                 hc->hw.r_tx1 = V_ATX | V_NTRI;
3872                 HFC_outb(hc, R_TX0, hc->hw.r_tx0);
3873                 HFC_outb(hc, R_TX1, hc->hw.r_tx1);
3874                 HFC_outb(hc, R_TX_FR0, 0x00);
3875                 HFC_outb(hc, R_TX_FR1, 0xf8);
3876
3877                 if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
3878                         HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
3879
3880                 HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
3881
3882                 if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
3883                         HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
3884
3885                 if (dch->dev.D.protocol == ISDN_P_NT_E1) {
3886                         if (debug & DEBUG_HFCMULTI_INIT)
3887                                 printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
3888                                     __func__);
3889                         r_e1_wr_sta = 0; /* G0 */
3890                         hc->e1_getclock = 0;
3891                 } else {
3892                         if (debug & DEBUG_HFCMULTI_INIT)
3893                                 printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
3894                                     __func__);
3895                         r_e1_wr_sta = 0; /* F0 */
3896                         hc->e1_getclock = 1;
3897                 }
3898                 if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
3899                         HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
3900                 else
3901                         HFC_outb(hc, R_SYNC_OUT, 0);
3902                 if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
3903                         hc->e1_getclock = 1;
3904                 if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
3905                         hc->e1_getclock = 0;
3906                 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
3907                         /* SLAVE (clock master) */
3908                         if (debug & DEBUG_HFCMULTI_INIT)
3909                                 printk(KERN_DEBUG
3910                                     "%s: E1 port is clock master "
3911                                     "(clock from PCM)\n", __func__);
3912                         HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
3913                 } else {
3914                         if (hc->e1_getclock) {
3915                                 /* MASTER (clock slave) */
3916                                 if (debug & DEBUG_HFCMULTI_INIT)
3917                                         printk(KERN_DEBUG
3918                                             "%s: E1 port is clock slave "
3919                                             "(clock to PCM)\n", __func__);
3920                                 HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
3921                         } else {
3922                                 /* MASTER (clock master) */
3923                                 if (debug & DEBUG_HFCMULTI_INIT)
3924                                         printk(KERN_DEBUG "%s: E1 port is "
3925                                             "clock master "
3926                                             "(clock from QUARTZ)\n",
3927                                             __func__);
3928                                 HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
3929                                     V_PCM_SYNC | V_JATT_OFF);
3930                                 HFC_outb(hc, R_SYNC_OUT, 0);
3931                         }
3932                 }
3933                 HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
3934                 HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
3935                 HFC_outb(hc, R_PWM0, 0x50);
3936                 HFC_outb(hc, R_PWM1, 0xff);
3937                 /* state machine setup */
3938                 HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
3939                 udelay(6); /* wait at least 5,21us */
3940                 HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
3941                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
3942                         hc->syncronized = 0;
3943                         plxsd_checksync(hc, 0);
3944                 }
3945         } else {
3946                 i = dch->slot;
3947                 hc->chan[i].slot_tx = -1;
3948                 hc->chan[i].slot_rx = -1;
3949                 hc->chan[i].conf = -1;
3950                 mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
3951                 dch->timer.function = (void *)hfcmulti_dbusy_timer;
3952                 dch->timer.data = (long) dch;
3953                 init_timer(&dch->timer);
3954                 hc->chan[i - 2].slot_tx = -1;
3955                 hc->chan[i - 2].slot_rx = -1;
3956                 hc->chan[i - 2].conf = -1;
3957                 mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
3958                 hc->chan[i - 1].slot_tx = -1;
3959                 hc->chan[i - 1].slot_rx = -1;
3960                 hc->chan[i - 1].conf = -1;
3961                 mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
3962                 /* ST */
3963                 pt = hc->chan[i].port;
3964                 /* select interface */
3965                 HFC_outb(hc, R_ST_SEL, pt);
3966                 /* undocumented: delay after R_ST_SEL */
3967                 udelay(1);
3968                 if (dch->dev.D.protocol == ISDN_P_NT_S0) {
3969                         if (debug & DEBUG_HFCMULTI_INIT)
3970                                 printk(KERN_DEBUG
3971                                     "%s: ST port %d is NT-mode\n",
3972                                     __func__, pt);
3973                         /* clock delay */
3974                         HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
3975                         a_st_wr_state = 1; /* G1 */
3976                         hc->hw.a_st_ctrl0[pt] = V_ST_MD;
3977                 } else {
3978                         if (debug & DEBUG_HFCMULTI_INIT)
3979                                 printk(KERN_DEBUG
3980                                     "%s: ST port %d is TE-mode\n",
3981                                     __func__, pt);
3982                         /* clock delay */
3983                         HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
3984                         a_st_wr_state = 2; /* F2 */
3985                         hc->hw.a_st_ctrl0[pt] = 0;
3986                 }
3987                 if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
3988                         hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
3989                 if (hc->ctype == HFC_TYPE_XHFC) {
3990                         hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */;
3991                         HFC_outb(hc, 0x35 /* A_ST_CTRL3 */,
3992                                 0x7c << 1 /* V_ST_PULSE */);
3993                 }
3994                 /* line setup */
3995                 HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
3996                 /* disable E-channel */
3997                 if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
3998                     test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
3999                         HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
4000                 else
4001                         HFC_outb(hc, A_ST_CTRL1, 0);
4002                 /* enable B-channel receive */
4003                 HFC_outb(hc, A_ST_CTRL2,  V_B1_RX_EN | V_B2_RX_EN);
4004                 /* state machine setup */
4005                 HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
4006                 udelay(6); /* wait at least 5,21us */
4007                 HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
4008                 hc->hw.r_sci_msk |= 1 << pt;
4009                 /* state machine interrupts */
4010                 HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
4011                 /* unset sync on port */
4012                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4013                         hc->syncronized &=
4014                            ~(1 << hc->chan[dch->slot].port);
4015                         plxsd_checksync(hc, 0);
4016                 }
4017         }
4018         if (debug & DEBUG_HFCMULTI_INIT)
4019                 printk("%s: done\n", __func__);
4020 }
4021
4022
4023 static int
4024 open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
4025     struct channel_req *rq)
4026 {
4027         int     err = 0;
4028         u_long  flags;
4029
4030         if (debug & DEBUG_HW_OPEN)
4031                 printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
4032                     dch->dev.id, __builtin_return_address(0));
4033         if (rq->protocol == ISDN_P_NONE)
4034                 return -EINVAL;
4035         if ((dch->dev.D.protocol != ISDN_P_NONE) &&
4036             (dch->dev.D.protocol != rq->protocol)) {
4037                 if (debug & DEBUG_HFCMULTI_MODE)
4038                         printk(KERN_DEBUG "%s: change protocol %x to %x\n",
4039                             __func__, dch->dev.D.protocol, rq->protocol);
4040         }
4041         if ((dch->dev.D.protocol == ISDN_P_TE_S0) &&
4042             (rq->protocol != ISDN_P_TE_S0))
4043                 l1_event(dch->l1, CLOSE_CHANNEL);
4044         if (dch->dev.D.protocol != rq->protocol) {
4045                 if (rq->protocol == ISDN_P_TE_S0) {
4046                         err = create_l1(dch, hfcm_l1callback);
4047                         if (err)
4048                                 return err;
4049                 }
4050                 dch->dev.D.protocol = rq->protocol;
4051                 spin_lock_irqsave(&hc->lock, flags);
4052                 hfcmulti_initmode(dch);
4053                 spin_unlock_irqrestore(&hc->lock, flags);
4054         }
4055
4056         if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
4057             ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
4058             ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
4059             ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
4060                 _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
4061                     0, NULL, GFP_KERNEL);
4062         }
4063         rq->ch = &dch->dev.D;
4064         if (!try_module_get(THIS_MODULE))
4065                 printk(KERN_WARNING "%s:cannot get module\n", __func__);
4066         return 0;
4067 }
4068
4069 static int
4070 open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
4071     struct channel_req *rq)
4072 {
4073         struct bchannel *bch;
4074         int             ch;
4075
4076         if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
4077                 return -EINVAL;
4078         if (rq->protocol == ISDN_P_NONE)
4079                 return -EINVAL;
4080         if (hc->ctype == HFC_TYPE_E1)
4081                 ch = rq->adr.channel;
4082         else
4083                 ch = (rq->adr.channel - 1) + (dch->slot - 2);
4084         bch = hc->chan[ch].bch;
4085         if (!bch) {
4086                 printk(KERN_ERR "%s:internal error ch %d has no bch\n",
4087                     __func__, ch);
4088                 return -EINVAL;
4089         }
4090         if (test_and_set_bit(FLG_OPEN, &bch->Flags))
4091                 return -EBUSY; /* b-channel can be only open once */
4092         test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
4093         bch->ch.protocol = rq->protocol;
4094         hc->chan[ch].rx_off = 0;
4095         rq->ch = &bch->ch;
4096         if (!try_module_get(THIS_MODULE))
4097                 printk(KERN_WARNING "%s:cannot get module\n", __func__);
4098         return 0;
4099 }
4100
4101 /*
4102  * device control function
4103  */
4104 static int
4105 channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
4106 {
4107         struct hfc_multi        *hc = dch->hw;
4108         int     ret = 0;
4109         int     wd_mode, wd_cnt;
4110
4111         switch (cq->op) {
4112         case MISDN_CTRL_GETOP:
4113                 cq->op = MISDN_CTRL_HFC_OP;
4114                 break;
4115         case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
4116                 wd_cnt = cq->p1 & 0xf;
4117                 wd_mode = !!(cq->p1 >> 4);
4118                 if (debug & DEBUG_HFCMULTI_MSG)
4119                         printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s"
4120                             ", counter 0x%x\n", __func__,
4121                             wd_mode ? "AUTO" : "MANUAL", wd_cnt);
4122                 /* set the watchdog timer */
4123                 HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
4124                 hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
4125                 if (hc->ctype == HFC_TYPE_XHFC)
4126                         hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
4127                 /* init the watchdog register and reset the counter */
4128                 HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
4129                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4130                         /* enable the watchdog output for Speech-Design */
4131                         HFC_outb(hc, R_GPIO_SEL,  V_GPIO_SEL7);
4132                         HFC_outb(hc, R_GPIO_EN1,  V_GPIO_EN15);
4133                         HFC_outb(hc, R_GPIO_OUT1, 0);
4134                         HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
4135                 }
4136                 break;
4137         case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
4138                 if (debug & DEBUG_HFCMULTI_MSG)
4139                         printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
4140                             __func__);
4141                 HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
4142                 break;
4143         default:
4144                 printk(KERN_WARNING "%s: unknown Op %x\n",
4145                     __func__, cq->op);
4146                 ret = -EINVAL;
4147                 break;
4148         }
4149         return ret;
4150 }
4151
4152 static int
4153 hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
4154 {
4155         struct mISDNdevice      *dev = container_of(ch, struct mISDNdevice, D);
4156         struct dchannel         *dch = container_of(dev, struct dchannel, dev);
4157         struct hfc_multi        *hc = dch->hw;
4158         struct channel_req      *rq;
4159         int                     err = 0;
4160         u_long                  flags;
4161
4162         if (dch->debug & DEBUG_HW)
4163                 printk(KERN_DEBUG "%s: cmd:%x %p\n",
4164                     __func__, cmd, arg);
4165         switch (cmd) {
4166         case OPEN_CHANNEL:
4167                 rq = arg;
4168                 switch (rq->protocol) {
4169                 case ISDN_P_TE_S0:
4170                 case ISDN_P_NT_S0:
4171                         if (hc->ctype == HFC_TYPE_E1) {
4172                                 err = -EINVAL;
4173                                 break;
4174                         }
4175                         err = open_dchannel(hc, dch, rq); /* locked there */
4176                         break;
4177                 case ISDN_P_TE_E1:
4178                 case ISDN_P_NT_E1:
4179                         if (hc->ctype != HFC_TYPE_E1) {
4180                                 err = -EINVAL;
4181                                 break;
4182                         }
4183                         err = open_dchannel(hc, dch, rq); /* locked there */
4184                         break;
4185                 default:
4186                         spin_lock_irqsave(&hc->lock, flags);
4187                         err = open_bchannel(hc, dch, rq);
4188                         spin_unlock_irqrestore(&hc->lock, flags);
4189                 }
4190                 break;
4191         case CLOSE_CHANNEL:
4192                 if (debug & DEBUG_HW_OPEN)
4193                         printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
4194                             __func__, dch->dev.id,
4195                             __builtin_return_address(0));
4196                 module_put(THIS_MODULE);
4197                 break;
4198         case CONTROL_CHANNEL:
4199                 spin_lock_irqsave(&hc->lock, flags);
4200                 err = channel_dctrl(dch, arg);
4201                 spin_unlock_irqrestore(&hc->lock, flags);
4202                 break;
4203         default:
4204                 if (dch->debug & DEBUG_HW)
4205                         printk(KERN_DEBUG "%s: unknown command %x\n",
4206                             __func__, cmd);
4207                 err = -EINVAL;
4208         }
4209         return err;
4210 }
4211
4212 static int
4213 clockctl(void *priv, int enable)
4214 {
4215         struct hfc_multi *hc = priv;
4216
4217         hc->iclock_on = enable;
4218         return 0;
4219 }
4220
4221 /*
4222  * initialize the card
4223  */
4224
4225 /*
4226  * start timer irq, wait some time and check if we have interrupts.
4227  * if not, reset chip and try again.
4228  */
4229 static int
4230 init_card(struct hfc_multi *hc)
4231 {
4232         int     err = -EIO;
4233         u_long  flags;
4234         void    __iomem *plx_acc;
4235         u_long  plx_flags;
4236
4237         if (debug & DEBUG_HFCMULTI_INIT)
4238                 printk(KERN_DEBUG "%s: entered\n", __func__);
4239
4240         spin_lock_irqsave(&hc->lock, flags);
4241         /* set interrupts but leave global interrupt disabled */
4242         hc->hw.r_irq_ctrl = V_FIFO_IRQ;
4243         disable_hwirq(hc);
4244         spin_unlock_irqrestore(&hc->lock, flags);
4245
4246         if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED,
4247             "HFC-multi", hc)) {
4248                 printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
4249                     hc->irq);
4250                 hc->irq = 0;
4251                 return -EIO;
4252         }
4253
4254         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4255                 spin_lock_irqsave(&plx_lock, plx_flags);
4256                 plx_acc = hc->plx_membase + PLX_INTCSR;
4257                 writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
4258                         plx_acc); /* enable PCI & LINT1 irq */
4259                 spin_unlock_irqrestore(&plx_lock, plx_flags);
4260         }
4261
4262         if (debug & DEBUG_HFCMULTI_INIT)
4263                 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4264                     __func__, hc->irq, hc->irqcnt);
4265         err = init_chip(hc);
4266         if (err)
4267                 goto error;
4268         /*
4269          * Finally enable IRQ output
4270          * this is only allowed, if an IRQ routine is allready
4271          * established for this HFC, so don't do that earlier
4272          */
4273         spin_lock_irqsave(&hc->lock, flags);
4274         enable_hwirq(hc);
4275         spin_unlock_irqrestore(&hc->lock, flags);
4276         /* printk(KERN_DEBUG "no master irq set!!!\n"); */
4277         set_current_state(TASK_UNINTERRUPTIBLE);
4278         schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
4279         /* turn IRQ off until chip is completely initialized */
4280         spin_lock_irqsave(&hc->lock, flags);
4281         disable_hwirq(hc);
4282         spin_unlock_irqrestore(&hc->lock, flags);
4283         if (debug & DEBUG_HFCMULTI_INIT)
4284                 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4285                     __func__, hc->irq, hc->irqcnt);
4286         if (hc->irqcnt) {
4287                 if (debug & DEBUG_HFCMULTI_INIT)
4288                         printk(KERN_DEBUG "%s: done\n", __func__);
4289
4290                 return 0;
4291         }
4292         if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
4293                 printk(KERN_INFO "ignoring missing interrupts\n");
4294                 return 0;
4295         }
4296
4297         printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
4298                 hc->irq);
4299
4300         err = -EIO;
4301
4302 error:
4303         if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4304                 spin_lock_irqsave(&plx_lock, plx_flags);
4305                 plx_acc = hc->plx_membase + PLX_INTCSR;
4306                 writew(0x00, plx_acc); /*disable IRQs*/
4307                 spin_unlock_irqrestore(&plx_lock, plx_flags);
4308         }
4309
4310         if (debug & DEBUG_HFCMULTI_INIT)
4311                 printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq);
4312         if (hc->irq) {
4313                 free_irq(hc->irq, hc);
4314                 hc->irq = 0;
4315         }
4316
4317         if (debug & DEBUG_HFCMULTI_INIT)
4318                 printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
4319         return err;
4320 }
4321
4322 /*
4323  * find pci device and set it up
4324  */
4325
4326 static int
4327 setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
4328                 const struct pci_device_id *ent)
4329 {
4330         struct hm_map   *m = (struct hm_map *)ent->driver_data;
4331
4332         printk(KERN_INFO
4333             "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
4334             m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
4335
4336         hc->pci_dev = pdev;
4337         if (m->clock2)
4338                 test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
4339
4340         if (ent->device == 0xB410) {
4341                 test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
4342                 test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
4343                 test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
4344                 hc->slots = 32;
4345         }
4346
4347         if (hc->pci_dev->irq <= 0) {
4348                 printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
4349                 return -EIO;
4350         }
4351         if (pci_enable_device(hc->pci_dev)) {
4352                 printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
4353                 return -EIO;
4354         }
4355         hc->leds = m->leds;
4356         hc->ledstate = 0xAFFEAFFE;
4357         hc->opticalsupport = m->opticalsupport;
4358
4359         hc->pci_iobase = 0;
4360         hc->pci_membase = NULL;
4361         hc->plx_membase = NULL;
4362
4363         /* set memory access methods */
4364         if (m->io_mode) /* use mode from card config */
4365                 hc->io_mode = m->io_mode;
4366         switch (hc->io_mode) {
4367         case HFC_IO_MODE_PLXSD:
4368                 test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
4369                 hc->slots = 128; /* required */
4370                 hc->HFC_outb = HFC_outb_pcimem;
4371                 hc->HFC_inb = HFC_inb_pcimem;
4372                 hc->HFC_inw = HFC_inw_pcimem;
4373                 hc->HFC_wait = HFC_wait_pcimem;
4374                 hc->read_fifo = read_fifo_pcimem;
4375                 hc->write_fifo = write_fifo_pcimem;
4376                 hc->plx_origmembase =  hc->pci_dev->resource[0].start;
4377                 /* MEMBASE 1 is PLX PCI Bridge */
4378
4379                 if (!hc->plx_origmembase) {
4380                         printk(KERN_WARNING
4381                           "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
4382                         pci_disable_device(hc->pci_dev);
4383                         return -EIO;
4384                 }
4385
4386                 hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
4387                 if (!hc->plx_membase) {
4388                         printk(KERN_WARNING
4389                             "HFC-multi: failed to remap plx address space. "
4390                             "(internal error)\n");
4391                         pci_disable_device(hc->pci_dev);
4392                         return -EIO;
4393                 }
4394                 printk(KERN_INFO
4395                     "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
4396                     (u_long)hc->plx_membase, hc->plx_origmembase);
4397
4398                 hc->pci_origmembase =  hc->pci_dev->resource[2].start;
4399                     /* MEMBASE 1 is PLX PCI Bridge */
4400                 if (!hc->pci_origmembase) {
4401                         printk(KERN_WARNING
4402                             "HFC-multi: No IO-Memory for PCI card found\n");
4403                         pci_disable_device(hc->pci_dev);
4404                         return -EIO;
4405                 }
4406
4407                 hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
4408                 if (!hc->pci_membase) {
4409                         printk(KERN_WARNING "HFC-multi: failed to remap io "
4410                             "address space. (internal error)\n");
4411                         pci_disable_device(hc->pci_dev);
4412                         return -EIO;
4413                 }
4414
4415                 printk(KERN_INFO
4416                     "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
4417                     "leds-type %d\n",
4418                     hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
4419                     hc->pci_dev->irq, HZ, hc->leds);
4420                 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
4421                 break;
4422         case HFC_IO_MODE_PCIMEM:
4423                 hc->HFC_outb = HFC_outb_pcimem;
4424                 hc->HFC_inb = HFC_inb_pcimem;
4425                 hc->HFC_inw = HFC_inw_pcimem;
4426                 hc->HFC_wait = HFC_wait_pcimem;
4427                 hc->read_fifo = read_fifo_pcimem;
4428                 hc->write_fifo = write_fifo_pcimem;
4429                 hc->pci_origmembase = hc->pci_dev->resource[1].start;
4430                 if (!hc->pci_origmembase) {
4431                         printk(KERN_WARNING
4432                             "HFC-multi: No IO-Memory for PCI card found\n");
4433                         pci_disable_device(hc->pci_dev);
4434                         return -EIO;
4435                 }
4436
4437                 hc->pci_membase = ioremap(hc->pci_origmembase, 256);
4438                 if (!hc->pci_membase) {
4439                         printk(KERN_WARNING
4440                             "HFC-multi: failed to remap io address space. "
4441                             "(internal error)\n");
4442                         pci_disable_device(hc->pci_dev);
4443                         return -EIO;
4444                 }
4445                 printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ "
4446                     "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
4447                     hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
4448                 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
4449                 break;
4450         case HFC_IO_MODE_REGIO:
4451                 hc->HFC_outb = HFC_outb_regio;
4452                 hc->HFC_inb = HFC_inb_regio;
4453                 hc->HFC_inw = HFC_inw_regio;
4454                 hc->HFC_wait = HFC_wait_regio;
4455                 hc->read_fifo = read_fifo_regio;
4456                 hc->write_fifo = write_fifo_regio;
4457                 hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
4458                 if (!hc->pci_iobase) {
4459                         printk(KERN_WARNING
4460                                 "HFC-multi: No IO for PCI card found\n");
4461                         pci_disable_device(hc->pci_dev);
4462                         return -EIO;
4463                 }
4464
4465                 if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
4466                         printk(KERN_WARNING "HFC-multi: failed to request "
4467                             "address space at 0x%08lx (internal error)\n",
4468                             hc->pci_iobase);
4469                         pci_disable_device(hc->pci_dev);
4470                         return -EIO;
4471                 }
4472
4473                 printk(KERN_INFO
4474                     "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
4475                     m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
4476                     hc->pci_dev->irq, HZ, hc->leds);
4477                 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
4478                 break;
4479         default:
4480                 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
4481                 pci_disable_device(hc->pci_dev);
4482                 return -EIO;
4483         }
4484
4485         pci_set_drvdata(hc->pci_dev, hc);
4486
4487         /* At this point the needed PCI config is done */
4488         /* fifos are still not enabled */
4489         return 0;
4490 }
4491
4492
4493 /*
4494  * remove port
4495  */
4496
4497 static void
4498 release_port(struct hfc_multi *hc, struct dchannel *dch)
4499 {
4500         int     pt, ci, i = 0;
4501         u_long  flags;
4502         struct bchannel *pb;
4503
4504         ci = dch->slot;
4505         pt = hc->chan[ci].port;
4506
4507         if (debug & DEBUG_HFCMULTI_INIT)
4508                 printk(KERN_DEBUG "%s: entered for port %d\n",
4509                         __func__, pt + 1);
4510
4511         if (pt >= hc->ports) {
4512                 printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
4513                      __func__, pt + 1);
4514                 return;
4515         }
4516
4517         if (debug & DEBUG_HFCMULTI_INIT)
4518                 printk(KERN_DEBUG "%s: releasing port=%d\n",
4519                     __func__, pt + 1);
4520
4521         if (dch->dev.D.protocol == ISDN_P_TE_S0)
4522                 l1_event(dch->l1, CLOSE_CHANNEL);
4523
4524         hc->chan[ci].dch = NULL;
4525
4526         if (hc->created[pt]) {
4527                 hc->created[pt] = 0;
4528                 mISDN_unregister_device(&dch->dev);
4529         }
4530
4531         spin_lock_irqsave(&hc->lock, flags);
4532
4533         if (dch->timer.function) {
4534                 del_timer(&dch->timer);
4535                 dch->timer.function = NULL;
4536         }
4537
4538         if (hc->ctype == HFC_TYPE_E1) { /* E1 */
4539                 /* remove sync */
4540                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4541                         hc->syncronized = 0;
4542                         plxsd_checksync(hc, 1);
4543                 }
4544                 /* free channels */
4545                 for (i = 0; i <= 31; i++) {
4546                         if (hc->chan[i].bch) {
4547                                 if (debug & DEBUG_HFCMULTI_INIT)
4548                                         printk(KERN_DEBUG
4549                                             "%s: free port %d channel %d\n",
4550                                             __func__, hc->chan[i].port+1, i);
4551                                 pb = hc->chan[i].bch;
4552                                 hc->chan[i].bch = NULL;
4553                                 spin_unlock_irqrestore(&hc->lock, flags);
4554                                 mISDN_freebchannel(pb);
4555                                 kfree(pb);
4556                                 kfree(hc->chan[i].coeff);
4557                                 spin_lock_irqsave(&hc->lock, flags);
4558                         }
4559                 }
4560         } else {
4561                 /* remove sync */
4562                 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4563                         hc->syncronized &=
4564                            ~(1 << hc->chan[ci].port);
4565                         plxsd_checksync(hc, 1);
4566                 }
4567                 /* free channels */
4568                 if (hc->chan[ci - 2].bch) {
4569                         if (debug & DEBUG_HFCMULTI_INIT)
4570                                 printk(KERN_DEBUG
4571                                     "%s: free port %d channel %d\n",
4572                                     __func__, hc->chan[ci - 2].port+1,
4573                                     ci - 2);
4574                         pb = hc->chan[ci - 2].bch;
4575                         hc->chan[ci - 2].bch = NULL;
4576                         spin_unlock_irqrestore(&hc->lock, flags);
4577                         mISDN_freebchannel(pb);
4578                         kfree(pb);
4579                         kfree(hc->chan[ci - 2].coeff);
4580                         spin_lock_irqsave(&hc->lock, flags);
4581                 }
4582                 if (hc->chan[ci - 1].bch) {
4583                         if (debug & DEBUG_HFCMULTI_INIT)
4584                                 printk(KERN_DEBUG
4585                                     "%s: free port %d channel %d\n",
4586                                     __func__, hc->chan[ci - 1].port+1,
4587                                     ci - 1);
4588                         pb = hc->chan[ci - 1].bch;
4589                         hc->chan[ci - 1].bch = NULL;
4590                         spin_unlock_irqrestore(&hc->lock, flags);
4591                         mISDN_freebchannel(pb);
4592                         kfree(pb);
4593                         kfree(hc->chan[ci - 1].coeff);
4594                         spin_lock_irqsave(&hc->lock, flags);
4595                 }
4596         }
4597
4598         spin_unlock_irqrestore(&hc->lock, flags);
4599
4600         if (debug & DEBUG_HFCMULTI_INIT)
4601                 printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
4602         mISDN_freedchannel(dch);
4603         kfree(dch);
4604
4605         if (debug & DEBUG_HFCMULTI_INIT)
4606                 printk(KERN_DEBUG "%s: done!\n", __func__);
4607 }
4608
4609 static void
4610 release_card(struct hfc_multi *hc)
4611 {
4612         u_long  flags;
4613         int     ch;
4614
4615         if (debug & DEBUG_HFCMULTI_INIT)
4616                 printk(KERN_DEBUG "%s: release card (%d) entered\n",
4617                     __func__, hc->id);
4618
4619         /* unregister clock source */
4620         if (hc->iclock)
4621                 mISDN_unregister_clock(hc->iclock);
4622
4623         /* disable irq */
4624         spin_lock_irqsave(&hc->lock, flags);
4625         disable_hwirq(hc);
4626         spin_unlock_irqrestore(&hc->lock, flags);
4627         udelay(1000);
4628
4629         /* dimm leds */
4630         if (hc->leds)
4631                 hfcmulti_leds(hc);
4632
4633         /* disable D-channels & B-channels */
4634         if (debug & DEBUG_HFCMULTI_INIT)
4635                 printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
4636                     __func__);
4637         for (ch = 0; ch <= 31; ch++) {
4638                 if (hc->chan[ch].dch)
4639                         release_port(hc, hc->chan[ch].dch);
4640         }
4641
4642         /* release hardware & irq */
4643         if (hc->irq) {
4644                 if (debug & DEBUG_HFCMULTI_INIT)
4645                         printk(KERN_DEBUG "%s: free irq %d\n",
4646                             __func__, hc->irq);
4647                 free_irq(hc->irq, hc);
4648                 hc->irq = 0;
4649
4650         }
4651         release_io_hfcmulti(hc);
4652
4653         if (debug & DEBUG_HFCMULTI_INIT)
4654                 printk(KERN_DEBUG "%s: remove instance from list\n",
4655                      __func__);
4656         list_del(&hc->list);
4657
4658         if (debug & DEBUG_HFCMULTI_INIT)
4659                 printk(KERN_DEBUG "%s: delete instance\n", __func__);
4660         if (hc == syncmaster)
4661                 syncmaster = NULL;
4662         kfree(hc);
4663         if (debug & DEBUG_HFCMULTI_INIT)
4664                 printk(KERN_DEBUG "%s: card successfully removed\n",
4665                     __func__);
4666 }
4667
4668 static int
4669 init_e1_port(struct hfc_multi *hc, struct hm_map *m)
4670 {
4671         struct dchannel *dch;
4672         struct bchannel *bch;
4673         int             ch, ret = 0;
4674         char            name[MISDN_MAX_IDLEN];
4675
4676         dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
4677         if (!dch)
4678                 return -ENOMEM;
4679         dch->debug = debug;
4680         mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
4681         dch->hw = hc;
4682         dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
4683         dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
4684             (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
4685         dch->dev.D.send = handle_dmsg;
4686         dch->dev.D.ctrl = hfcm_dctrl;
4687         dch->dev.nrbchan = (hc->dslot) ? 30 : 31;
4688         dch->slot = hc->dslot;
4689         hc->chan[hc->dslot].dch = dch;
4690         hc->chan[hc->dslot].port = 0;
4691         hc->chan[hc->dslot].nt_timer = -1;
4692         for (ch = 1; ch <= 31; ch++) {
4693                 if (ch == hc->dslot) /* skip dchannel */
4694                         continue;
4695                 bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
4696                 if (!bch) {
4697                         printk(KERN_ERR "%s: no memory for bchannel\n",
4698                             __func__);
4699                         ret = -ENOMEM;
4700                         goto free_chan;
4701                 }
4702                 hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
4703                 if (!hc->chan[ch].coeff) {
4704                         printk(KERN_ERR "%s: no memory for coeffs\n",
4705                             __func__);
4706                         ret = -ENOMEM;
4707                         kfree(bch);
4708                         goto free_chan;
4709                 }
4710                 bch->nr = ch;
4711                 bch->slot = ch;
4712                 bch->debug = debug;
4713                 mISDN_initbchannel(bch, MAX_DATA_MEM);
4714                 bch->hw = hc;
4715                 bch->ch.send = handle_bmsg;
4716                 bch->ch.ctrl = hfcm_bctrl;
4717                 bch->ch.nr = ch;
4718                 list_add(&bch->ch.list, &dch->dev.bchannels);
4719                 hc->chan[ch].bch = bch;
4720                 hc->chan[ch].port = 0;
4721                 set_channelmap(bch->nr, dch->dev.channelmap);
4722         }
4723         /* set optical line type */
4724         if (port[Port_cnt] & 0x001) {
4725                 if (!m->opticalsupport)  {
4726                         printk(KERN_INFO
4727                             "This board has no optical "
4728                             "support\n");
4729                 } else {
4730                         if (debug & DEBUG_HFCMULTI_INIT)
4731                                 printk(KERN_DEBUG
4732                                     "%s: PORT set optical "
4733                                     "interfacs: card(%d) "
4734                                     "port(%d)\n",
4735                                     __func__,
4736                                     HFC_cnt + 1, 1);
4737                         test_and_set_bit(HFC_CFG_OPTICAL,
4738                             &hc->chan[hc->dslot].cfg);
4739                 }
4740         }
4741         /* set LOS report */
4742         if (port[Port_cnt] & 0x004) {
4743                 if (debug & DEBUG_HFCMULTI_INIT)
4744                         printk(KERN_DEBUG "%s: PORT set "
4745                             "LOS report: card(%d) port(%d)\n",
4746                             __func__, HFC_cnt + 1, 1);
4747                 test_and_set_bit(HFC_CFG_REPORT_LOS,
4748                     &hc->chan[hc->dslot].cfg);
4749         }
4750         /* set AIS report */
4751         if (port[Port_cnt] & 0x008) {
4752                 if (debug & DEBUG_HFCMULTI_INIT)
4753                         printk(KERN_DEBUG "%s: PORT set "
4754                             "AIS report: card(%d) port(%d)\n",
4755                             __func__, HFC_cnt + 1, 1);
4756                 test_and_set_bit(HFC_CFG_REPORT_AIS,
4757                     &hc->chan[hc->dslot].cfg);
4758         }
4759         /* set SLIP report */
4760         if (port[Port_cnt] & 0x010) {
4761                 if (debug & DEBUG_HFCMULTI_INIT)
4762                         printk(KERN_DEBUG
4763                             "%s: PORT set SLIP report: "
4764                             "card(%d) port(%d)\n",
4765                             __func__, HFC_cnt + 1, 1);
4766                 test_and_set_bit(HFC_CFG_REPORT_SLIP,
4767                     &hc->chan[hc->dslot].cfg);
4768         }
4769         /* set RDI report */
4770         if (port[Port_cnt] & 0x020) {
4771                 if (debug & DEBUG_HFCMULTI_INIT)
4772                         printk(KERN_DEBUG
4773                             "%s: PORT set RDI report: "
4774                             "card(%d) port(%d)\n",
4775                             __func__, HFC_cnt + 1, 1);
4776                 test_and_set_bit(HFC_CFG_REPORT_RDI,
4777                     &hc->chan[hc->dslot].cfg);
4778         }
4779         /* set CRC-4 Mode */
4780         if (!(port[Port_cnt] & 0x100)) {
4781                 if (debug & DEBUG_HFCMULTI_INIT)
4782                         printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
4783                                 " card(%d) port(%d)\n",
4784                                 __func__, HFC_cnt + 1, 1);
4785                 test_and_set_bit(HFC_CFG_CRC4,
4786                     &hc->chan[hc->dslot].cfg);
4787         } else {
4788                 if (debug & DEBUG_HFCMULTI_INIT)
4789                         printk(KERN_DEBUG "%s: PORT turn off CRC4"
4790                                 " report: card(%d) port(%d)\n",
4791                                 __func__, HFC_cnt + 1, 1);
4792         }
4793         /* set forced clock */
4794         if (port[Port_cnt] & 0x0200) {
4795                 if (debug & DEBUG_HFCMULTI_INIT)
4796                         printk(KERN_DEBUG "%s: PORT force getting clock from "
4797                                 "E1: card(%d) port(%d)\n",
4798                                 __func__, HFC_cnt + 1, 1);
4799                 test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
4800         } else
4801         if (port[Port_cnt] & 0x0400) {
4802                 if (debug & DEBUG_HFCMULTI_INIT)
4803                         printk(KERN_DEBUG "%s: PORT force putting clock to "
4804                                 "E1: card(%d) port(%d)\n",
4805                                 __func__, HFC_cnt + 1, 1);
4806                 test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
4807         }
4808         /* set JATT PLL */
4809         if (port[Port_cnt] & 0x0800) {
4810                 if (debug & DEBUG_HFCMULTI_INIT)
4811                         printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
4812                                 "E1: card(%d) port(%d)\n",
4813                                 __func__, HFC_cnt + 1, 1);
4814                 test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
4815         }
4816         /* set elastic jitter buffer */
4817         if (port[Port_cnt] & 0x3000) {
4818                 hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
4819                 if (debug & DEBUG_HFCMULTI_INIT)
4820                         printk(KERN_DEBUG
4821                             "%s: PORT set elastic "
4822                             "buffer to %d: card(%d) port(%d)\n",
4823                             __func__, hc->chan[hc->dslot].jitter,
4824                             HFC_cnt + 1, 1);
4825         } else
4826                 hc->chan[hc->dslot].jitter = 2; /* default */
4827         snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
4828         ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
4829         if (ret)
4830                 goto free_chan;
4831         hc->created[0] = 1;
4832         return ret;
4833 free_chan:
4834         release_port(hc, dch);
4835         return ret;
4836 }
4837
4838 static int
4839 init_multi_port(struct hfc_multi *hc, int pt)
4840 {
4841         struct dchannel *dch;
4842         struct bchannel *bch;
4843         int             ch, i, ret = 0;
4844         char            name[MISDN_MAX_IDLEN];
4845
4846         dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
4847         if (!dch)
4848                 return -ENOMEM;
4849         dch->debug = debug;
4850         mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
4851         dch->hw = hc;
4852         dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
4853         dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
4854             (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
4855         dch->dev.D.send = handle_dmsg;
4856         dch->dev.D.ctrl = hfcm_dctrl;
4857         dch->dev.nrbchan = 2;
4858         i = pt << 2;
4859         dch->slot = i + 2;
4860         hc->chan[i + 2].dch = dch;
4861         hc->chan[i + 2].port = pt;
4862         hc->chan[i + 2].nt_timer = -1;
4863         for (ch = 0; ch < dch->dev.nrbchan; ch++) {
4864                 bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
4865                 if (!bch) {
4866                         printk(KERN_ERR "%s: no memory for bchannel\n",
4867                             __func__);
4868                         ret = -ENOMEM;
4869                         goto free_chan;
4870                 }
4871                 hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
4872                 if (!hc->chan[i + ch].coeff) {
4873                         printk(KERN_ERR "%s: no memory for coeffs\n",
4874                             __func__);
4875                         ret = -ENOMEM;
4876                         kfree(bch);
4877                         goto free_chan;
4878                 }
4879                 bch->nr = ch + 1;
4880                 bch->slot = i + ch;
4881                 bch->debug = debug;
4882                 mISDN_initbchannel(bch, MAX_DATA_MEM);
4883                 bch->hw = hc;
4884                 bch->ch.send = handle_bmsg;
4885                 bch->ch.ctrl = hfcm_bctrl;
4886                 bch->ch.nr = ch + 1;
4887                 list_add(&bch->ch.list, &dch->dev.bchannels);
4888                 hc->chan[i + ch].bch = bch;
4889                 hc->chan[i + ch].port = pt;
4890                 set_channelmap(bch->nr, dch->dev.channelmap);
4891         }
4892         /* set master clock */
4893         if (port[Port_cnt] & 0x001) {
4894                 if (debug & DEBUG_HFCMULTI_INIT)
4895                         printk(KERN_DEBUG
4896                             "%s: PROTOCOL set master clock: "
4897                             "card(%d) port(%d)\n",
4898                             __func__, HFC_cnt + 1, pt + 1);
4899                 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
4900                         printk(KERN_ERR "Error: Master clock "
4901                             "for port(%d) of card(%d) is only"
4902                             " possible with TE-mode\n",
4903                             pt + 1, HFC_cnt + 1);
4904                         ret = -EINVAL;
4905                         goto free_chan;
4906                 }
4907                 if (hc->masterclk >= 0) {
4908                         printk(KERN_ERR "Error: Master clock "
4909                             "for port(%d) of card(%d) already "
4910                             "defined for port(%d)\n",
4911                             pt + 1, HFC_cnt + 1, hc->masterclk+1);
4912                         ret = -EINVAL;
4913                         goto free_chan;
4914                 }
4915                 hc->masterclk = pt;
4916         }
4917         /* set transmitter line to non capacitive */
4918         if (port[Port_cnt] & 0x002) {
4919                 if (debug & DEBUG_HFCMULTI_INIT)
4920                         printk(KERN_DEBUG
4921                             "%s: PROTOCOL set non capacitive "
4922                             "transmitter: card(%d) port(%d)\n",
4923                             __func__, HFC_cnt + 1, pt + 1);
4924                 test_and_set_bit(HFC_CFG_NONCAP_TX,
4925                     &hc->chan[i + 2].cfg);
4926         }
4927         /* disable E-channel */
4928         if (port[Port_cnt] & 0x004) {
4929                 if (debug & DEBUG_HFCMULTI_INIT)
4930                         printk(KERN_DEBUG
4931                             "%s: PROTOCOL disable E-channel: "
4932                             "card(%d) port(%d)\n",
4933                             __func__, HFC_cnt + 1, pt + 1);
4934                 test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
4935                     &hc->chan[i + 2].cfg);
4936         }
4937         if (hc->ctype == HFC_TYPE_XHFC) {
4938                 snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d",
4939                         HFC_cnt + 1, pt + 1);
4940                 ret = mISDN_register_device(&dch->dev, NULL, name);
4941         } else {
4942                 snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
4943                         hc->ctype, HFC_cnt + 1, pt + 1);
4944                 ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
4945         }
4946         if (ret)
4947                 goto free_chan;
4948         hc->created[pt] = 1;
4949         return ret;
4950 free_chan:
4951         release_port(hc, dch);
4952         return ret;
4953 }
4954
4955 static int
4956 hfcmulti_init(struct hm_map *m, struct pci_dev *pdev,
4957     const struct pci_device_id *ent)
4958 {
4959         int             ret_err = 0;
4960         int             pt;
4961         struct hfc_multi        *hc;
4962         u_long          flags;
4963         u_char          dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
4964         int             i;
4965
4966         if (HFC_cnt >= MAX_CARDS) {
4967                 printk(KERN_ERR "too many cards (max=%d).\n",
4968                         MAX_CARDS);
4969                 return -EINVAL;
4970         }
4971         if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
4972                 printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
4973                     "type[%d] %d was supplied as module parameter\n",
4974                     m->vendor_name, m->card_name, m->type, HFC_cnt,
4975                     type[HFC_cnt] & 0xff);
4976                 printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
4977                         "first, to see cards and their types.");
4978                 return -EINVAL;
4979         }
4980         if (debug & DEBUG_HFCMULTI_INIT)
4981                 printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
4982                     __func__, m->vendor_name, m->card_name, m->type,
4983                     type[HFC_cnt]);
4984
4985         /* allocate card+fifo structure */
4986         hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
4987         if (!hc) {
4988                 printk(KERN_ERR "No kmem for HFC-Multi card\n");
4989                 return -ENOMEM;
4990         }
4991         spin_lock_init(&hc->lock);
4992         hc->mtyp = m;
4993         hc->ctype =  m->type;
4994         hc->ports = m->ports;
4995         hc->id = HFC_cnt;
4996         hc->pcm = pcm[HFC_cnt];
4997         hc->io_mode = iomode[HFC_cnt];
4998         if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) {
4999                 hc->dslot = 0;
5000                 printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
5001                         "31 B-channels\n");
5002         }
5003         if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32
5004             && hc->ctype == HFC_TYPE_E1) {
5005                 hc->dslot = dslot[HFC_cnt];
5006                 printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
5007                         "time slot %d\n", dslot[HFC_cnt]);
5008         } else
5009                 hc->dslot = 16;
5010
5011         /* set chip specific features */
5012         hc->masterclk = -1;
5013         if (type[HFC_cnt] & 0x100) {
5014                 test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
5015                 hc->silence = 0xff; /* ulaw silence */
5016         } else
5017                 hc->silence = 0x2a; /* alaw silence */
5018         if ((poll >> 1) > sizeof(hc->silence_data)) {
5019                 printk(KERN_ERR "HFCMULTI error: silence_data too small, "
5020                         "please fix\n");
5021                 return -EINVAL;
5022         }
5023         for (i = 0; i < (poll >> 1); i++)
5024                 hc->silence_data[i] = hc->silence;
5025
5026         if (hc->ctype != HFC_TYPE_XHFC) {
5027                 if (!(type[HFC_cnt] & 0x200))
5028                         test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
5029                 test_and_set_bit(HFC_CHIP_CONF, &hc->chip);
5030         }
5031
5032         if (type[HFC_cnt] & 0x800)
5033                 test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
5034         if (type[HFC_cnt] & 0x1000) {
5035                 test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
5036                 test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
5037         }
5038         if (type[HFC_cnt] & 0x4000)
5039                 test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
5040         if (type[HFC_cnt] & 0x8000)
5041                 test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
5042         hc->slots = 32;
5043         if (type[HFC_cnt] & 0x10000)
5044                 hc->slots = 64;
5045         if (type[HFC_cnt] & 0x20000)
5046                 hc->slots = 128;
5047         if (type[HFC_cnt] & 0x80000) {
5048                 test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
5049                 hc->wdcount = 0;
5050                 hc->wdbyte = V_GPIO_OUT2;
5051                 printk(KERN_NOTICE "Watchdog enabled\n");
5052         }
5053
5054         if (pdev && ent)
5055                 /* setup pci, hc->slots may change due to PLXSD */
5056                 ret_err = setup_pci(hc, pdev, ent);
5057         else
5058 #ifdef CONFIG_MISDN_HFCMULTI_8xx
5059                 ret_err = setup_embedded(hc, m);
5060 #else
5061         {
5062                 printk(KERN_WARNING "Embedded IO Mode not selected\n");
5063                 ret_err = -EIO;
5064         }
5065 #endif
5066         if (ret_err) {
5067                 if (hc == syncmaster)
5068                         syncmaster = NULL;
5069                 kfree(hc);
5070                 return ret_err;
5071         }
5072
5073         hc->HFC_outb_nodebug = hc->HFC_outb;
5074         hc->HFC_inb_nodebug = hc->HFC_inb;
5075         hc->HFC_inw_nodebug = hc->HFC_inw;
5076         hc->HFC_wait_nodebug = hc->HFC_wait;
5077 #ifdef HFC_REGISTER_DEBUG
5078         hc->HFC_outb = HFC_outb_debug;
5079         hc->HFC_inb = HFC_inb_debug;
5080         hc->HFC_inw = HFC_inw_debug;
5081         hc->HFC_wait = HFC_wait_debug;
5082 #endif
5083         /* create channels */
5084         for (pt = 0; pt < hc->ports; pt++) {
5085                 if (Port_cnt >= MAX_PORTS) {
5086                         printk(KERN_ERR "too many ports (max=%d).\n",
5087                                 MAX_PORTS);
5088                         ret_err = -EINVAL;
5089                         goto free_card;
5090                 }
5091                 if (hc->ctype == HFC_TYPE_E1)
5092                         ret_err = init_e1_port(hc, m);
5093                 else
5094                         ret_err = init_multi_port(hc, pt);
5095                 if (debug & DEBUG_HFCMULTI_INIT)
5096                         printk(KERN_DEBUG
5097                             "%s: Registering D-channel, card(%d) port(%d)"
5098                             "result %d\n",
5099                             __func__, HFC_cnt + 1, pt, ret_err);
5100
5101                 if (ret_err) {
5102                         while (pt) { /* release already registered ports */
5103                                 pt--;
5104                                 release_port(hc, hc->chan[(pt << 2) + 2].dch);
5105                         }
5106                         goto free_card;
5107                 }
5108                 Port_cnt++;
5109         }
5110
5111         /* disp switches */
5112         switch (m->dip_type) {
5113         case DIP_4S:
5114                 /*
5115                  * Get DIP setting for beroNet 1S/2S/4S cards
5116                  * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
5117                  * GPI 19/23 (R_GPI_IN2))
5118                  */
5119                 dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
5120                         ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
5121                         (~HFC_inb(hc, R_GPI_IN2) & 0x08);
5122
5123                 /* Port mode (TE/NT) jumpers */
5124                 pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4)  & 0xf);
5125
5126                 if (test_bit(HFC_CHIP_B410P, &hc->chip))
5127                         pmj = ~pmj & 0xf;
5128
5129                 printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
5130                         m->vendor_name, m->card_name, dips, pmj);
5131                 break;
5132         case DIP_8S:
5133                 /*
5134                  * Get DIP Setting for beroNet 8S0+ cards
5135                  * Enable PCI auxbridge function
5136                  */
5137                 HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
5138                 /* prepare access to auxport */
5139                 outw(0x4000, hc->pci_iobase + 4);
5140                 /*
5141                  * some dummy reads are required to
5142                  * read valid DIP switch data
5143                  */
5144                 dips = inb(hc->pci_iobase);
5145                 dips = inb(hc->pci_iobase);
5146                 dips = inb(hc->pci_iobase);
5147                 dips = ~inb(hc->pci_iobase) & 0x3F;
5148                 outw(0x0, hc->pci_iobase + 4);
5149                 /* disable PCI auxbridge function */
5150                 HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
5151                 printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
5152                     m->vendor_name, m->card_name, dips);
5153                 break;
5154         case DIP_E1:
5155                 /*
5156                  * get DIP Setting for beroNet E1 cards
5157                  * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
5158                  */
5159                 dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
5160                 printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
5161                     m->vendor_name, m->card_name, dips);
5162                 break;
5163         }
5164
5165         /* add to list */
5166         spin_lock_irqsave(&HFClock, flags);
5167         list_add_tail(&hc->list, &HFClist);
5168         spin_unlock_irqrestore(&HFClock, flags);
5169
5170         /* use as clock source */
5171         if (clock == HFC_cnt + 1)
5172                 hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
5173
5174         /* initialize hardware */
5175         hc->irq = (m->irq) ? : hc->pci_dev->irq;
5176         ret_err = init_card(hc);
5177         if (ret_err) {
5178                 printk(KERN_ERR "init card returns %d\n", ret_err);
5179                 release_card(hc);
5180                 return ret_err;
5181         }
5182
5183         /* start IRQ and return */
5184         spin_lock_irqsave(&hc->lock, flags);
5185         enable_hwirq(hc);
5186         spin_unlock_irqrestore(&hc->lock, flags);
5187         return 0;
5188
5189 free_card:
5190         release_io_hfcmulti(hc);
5191         if (hc == syncmaster)
5192                 syncmaster = NULL;
5193         kfree(hc);
5194         return ret_err;
5195 }
5196
5197 static void __devexit hfc_remove_pci(struct pci_dev *pdev)
5198 {
5199         struct hfc_multi        *card = pci_get_drvdata(pdev);
5200         u_long                  flags;
5201
5202         if (debug)
5203                 printk(KERN_INFO "removing hfc_multi card vendor:%x "
5204                     "device:%x subvendor:%x subdevice:%x\n",
5205                     pdev->vendor, pdev->device,
5206                     pdev->subsystem_vendor, pdev->subsystem_device);
5207
5208         if (card) {
5209                 spin_lock_irqsave(&HFClock, flags);
5210                 release_card(card);
5211                 spin_unlock_irqrestore(&HFClock, flags);
5212         }  else {
5213                 if (debug)
5214                         printk(KERN_DEBUG "%s: drvdata allready removed\n",
5215                             __func__);
5216         }
5217 }
5218
5219 #define VENDOR_CCD      "Cologne Chip AG"
5220 #define VENDOR_BN       "beroNet GmbH"
5221 #define VENDOR_DIG      "Digium Inc."
5222 #define VENDOR_JH       "Junghanns.NET GmbH"
5223 #define VENDOR_PRIM     "PrimuX"
5224
5225 static const struct hm_map hfcm_map[] = {
5226 /*0*/   {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0},
5227 /*1*/   {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
5228 /*2*/   {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
5229 /*3*/   {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
5230 /*4*/   {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0},
5231 /*5*/   {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0},
5232 /*6*/   {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
5233 /*7*/   {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0},
5234 /*8*/   {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0},
5235 /*9*/   {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0},
5236 /*10*/  {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0},
5237 /*11*/  {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0},
5238
5239 /*12*/  {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0},
5240 /*13*/  {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
5241                 HFC_IO_MODE_REGIO, 0},
5242 /*14*/  {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0},
5243 /*15*/  {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0},
5244
5245 /*16*/  {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0},
5246 /*17*/  {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
5247 /*18*/  {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
5248
5249 /*19*/  {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
5250 /*20*/  {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0},
5251 /*21*/  {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
5252 /*22*/  {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
5253
5254 /*23*/  {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0},
5255 /*24*/  {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0},
5256 /*25*/  {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0},
5257
5258 /*26*/  {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
5259                 HFC_IO_MODE_PLXSD, 0},
5260 /*27*/  {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
5261                 HFC_IO_MODE_PLXSD, 0},
5262 /*28*/  {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0},
5263 /*29*/  {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0},
5264 /*30*/  {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0},
5265 /*31*/  {VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0,
5266                 HFC_IO_MODE_EMBSD, XHFC_IRQ},
5267 /*32*/  {VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0},
5268 };
5269
5270 #undef H
5271 #define H(x)    ((unsigned long)&hfcm_map[x])
5272 static struct pci_device_id hfmultipci_ids[] __devinitdata = {
5273
5274         /* Cards with HFC-4S Chip */
5275         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5276                 PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
5277         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5278                 PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
5279         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5280                 PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
5281         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5282                 PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
5283         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5284                 PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
5285         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5286                 PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
5287         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5288                 PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
5289         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5290                 PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
5291         { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
5292                 PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
5293         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5294                 PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
5295         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5296                 PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
5297         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5298                 PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
5299         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5300                 PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
5301         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5302                 PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
5303
5304         /* Cards with HFC-8S Chip */
5305         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5306         PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
5307         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5308         PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
5309         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5310         PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
5311         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5312         PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */
5313         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5314                 PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
5315         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5316                 PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST  */
5317         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5318                 PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
5319         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5320                 PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
5321         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5322                 PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S  */
5323
5324
5325         /* Cards with HFC-E1 Chip */
5326         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5327                 PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
5328         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5329                 PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
5330         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5331                 PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
5332         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5333                 PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
5334
5335         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5336                 PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
5337         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5338                 PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
5339         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5340                 PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
5341
5342         { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
5343                 PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
5344         { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
5345                 PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
5346
5347         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5348                 PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */
5349
5350         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
5351                 0, 0, 0},
5352         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
5353                 0, 0, 0},
5354         { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
5355                 0, 0, 0},
5356         {0, }
5357 };
5358 #undef H
5359
5360 MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
5361
5362 static int
5363 hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
5364 {
5365         struct hm_map   *m = (struct hm_map *)ent->driver_data;
5366         int             ret;
5367
5368         if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && (
5369             ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
5370             ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
5371             ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
5372                 printk(KERN_ERR
5373                     "Unknown HFC multiport controller (vendor:%04x device:%04x "
5374                     "subvendor:%04x subdevice:%04x)\n", pdev->vendor,
5375                     pdev->device, pdev->subsystem_vendor,
5376                     pdev->subsystem_device);
5377                 printk(KERN_ERR
5378                     "Please contact the driver maintainer for support.\n");
5379                 return -ENODEV;
5380         }
5381         ret = hfcmulti_init(m, pdev, ent);
5382         if (ret)
5383                 return ret;
5384         HFC_cnt++;
5385         printk(KERN_INFO "%d devices registered\n", HFC_cnt);
5386         return 0;
5387 }
5388
5389 static struct pci_driver hfcmultipci_driver = {
5390         .name           = "hfc_multi",
5391         .probe          = hfcmulti_probe,
5392         .remove         = __devexit_p(hfc_remove_pci),
5393         .id_table       = hfmultipci_ids,
5394 };
5395
5396 static void __exit
5397 HFCmulti_cleanup(void)
5398 {
5399         struct hfc_multi *card, *next;
5400
5401         /* get rid of all devices of this driver */
5402         list_for_each_entry_safe(card, next, &HFClist, list)
5403                 release_card(card);
5404         pci_unregister_driver(&hfcmultipci_driver);
5405 }
5406
5407 static int __init
5408 HFCmulti_init(void)
5409 {
5410         int err;
5411         int i, xhfc = 0;
5412         struct hm_map m;
5413
5414         printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
5415
5416 #ifdef IRQ_DEBUG
5417         printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
5418 #endif
5419
5420         spin_lock_init(&HFClock);
5421         spin_lock_init(&plx_lock);
5422
5423         if (debug & DEBUG_HFCMULTI_INIT)
5424                 printk(KERN_DEBUG "%s: init entered\n", __func__);
5425
5426         switch (poll) {
5427         case 0:
5428                 poll_timer = 6;
5429                 poll = 128;
5430                 break;
5431         case 8:
5432                 poll_timer = 2;
5433                 break;
5434         case 16:
5435                 poll_timer = 3;
5436                 break;
5437         case 32:
5438                 poll_timer = 4;
5439                 break;
5440         case 64:
5441                 poll_timer = 5;
5442                 break;
5443         case 128:
5444                 poll_timer = 6;
5445                 break;
5446         case 256:
5447                 poll_timer = 7;
5448                 break;
5449         default:
5450                 printk(KERN_ERR
5451                     "%s: Wrong poll value (%d).\n", __func__, poll);
5452                 err = -EINVAL;
5453                 return err;
5454
5455         }
5456
5457         if (!clock)
5458                 clock = 1;
5459
5460         /* Register the embedded devices.
5461          * This should be done before the PCI cards registration */
5462         switch (hwid) {
5463         case HWID_MINIP4:
5464                 xhfc = 1;
5465                 m = hfcm_map[31];
5466                 break;
5467         case HWID_MINIP8:
5468                 xhfc = 2;
5469                 m = hfcm_map[31];
5470                 break;
5471         case HWID_MINIP16:
5472                 xhfc = 4;
5473                 m = hfcm_map[31];
5474                 break;
5475         default:
5476                 xhfc = 0;
5477         }
5478
5479         for (i = 0; i < xhfc; ++i) {
5480                 err = hfcmulti_init(&m, NULL, NULL);
5481                 if (err) {
5482                         printk(KERN_ERR "error registering embedded driver: "
5483                                 "%x\n", err);
5484                         return err;
5485                 }
5486                 HFC_cnt++;
5487                 printk(KERN_INFO "%d devices registered\n", HFC_cnt);
5488         }
5489
5490         /* Register the PCI cards */
5491         err = pci_register_driver(&hfcmultipci_driver);
5492         if (err < 0) {
5493                 printk(KERN_ERR "error registering pci driver: %x\n", err);
5494                 return err;
5495         }
5496
5497         return 0;
5498 }
5499
5500
5501 module_init(HFCmulti_init);
5502 module_exit(HFCmulti_cleanup);