drivers/input/touchscreen/zet6223.c

   1 /*
   2  * Copyright (C) 2016, Jelle van der Waa <jelle@vdwaa.nl>
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the Free
   6  * Software Foundation; either version 2 of the License, or (at your option)
   7  * any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  */
  14
  15 #include <linux/delay.h>
  16 #include <linux/i2c.h>
  17 #include <linux/input.h>
  18 #include <linux/input/mt.h>
  19 #include <linux/input/touchscreen.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/module.h>
  22 #include <linux/regulator/consumer.h>
  23 #include <asm/unaligned.h>
  24
  25 #define ZET6223_MAX_FINGERS             16
  26 #define ZET6223_MAX_PKT_SIZE            (3 + 4 * ZET6223_MAX_FINGERS)
  27
  28 #define ZET6223_CMD_INFO                0xB2
  29 #define ZET6223_CMD_INFO_LENGTH         17
  30 #define ZET6223_VALID_PACKET            0x3c
  31
  32 #define ZET6223_POWER_ON_DELAY_MSEC     30
  33
  34 struct zet6223_ts {
  35         struct i2c_client *client;
  36         struct input_dev *input;
  37         struct regulator *vcc;
  38         struct regulator *vio;
  39         struct touchscreen_properties prop;
  40         struct regulator_bulk_data supplies[2];
  41         u16 max_x;
  42         u16 max_y;
  43         u8 fingernum;
  44 };
  45
  46 static int zet6223_start(struct input_dev *dev)
  47 {
  48         struct zet6223_ts *ts = input_get_drvdata(dev);
  49
  50         enable_irq(ts->client->irq);
  51
  52         return 0;
  53 }
  54
  55 static void zet6223_stop(struct input_dev *dev)
  56 {
  57         struct zet6223_ts *ts = input_get_drvdata(dev);
  58
  59         disable_irq(ts->client->irq);
  60 }
  61
  62 static irqreturn_t zet6223_irq(int irq, void *dev_id)
  63 {
  64         struct zet6223_ts *ts = dev_id;
  65         u16 finger_bits;
  66
  67         /*
  68          * First 3 bytes are an identifier, two bytes of finger data.
  69          * X, Y data per finger is 4 bytes.
  70          */
  71         u8 bufsize = 3 + 4 * ts->fingernum;
  72         u8 buf[ZET6223_MAX_PKT_SIZE];
  73         int i;
  74         int ret;
  75         int error;
  76
  77         ret = i2c_master_recv(ts->client, buf, bufsize);
  78         if (ret != bufsize) {
  79                 error = ret < 0 ? ret : -EIO;
  80                 dev_err_ratelimited(&ts->client->dev,
  81                                     "Error reading input data: %d\n", error);
  82                 return IRQ_HANDLED;
  83         }
  84
  85         if (buf[0] != ZET6223_VALID_PACKET)
  86                 return IRQ_HANDLED;
  87
  88         finger_bits = get_unaligned_be16(buf + 1);
  89         for (i = 0; i < ts->fingernum; i++) {
  90                 if (!(finger_bits & BIT(15 - i)))
  91                         continue;
  92
  93                 input_mt_slot(ts->input, i);
  94                 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
  95                 input_event(ts->input, EV_ABS, ABS_MT_POSITION_X,
  96                                 ((buf[i + 3] >> 4) << 8) + buf[i + 4]);
  97                 input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y,
  98                                 ((buf[i + 3] & 0xF) << 8) + buf[i + 5]);
  99         }
 100
 101         input_mt_sync_frame(ts->input);
 102         input_sync(ts->input);
 103
 104         return IRQ_HANDLED;
 105 }
 106
 107 static void zet6223_power_off(void *_ts)
 108 {
 109         struct zet6223_ts *ts = _ts;
 110
 111         regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
 112 }
 113
 114 static int zet6223_power_on(struct zet6223_ts *ts)
 115 {
 116         struct device *dev = &ts->client->dev;
 117         int error;
 118
 119         ts->supplies[0].supply = "vio";
 120         ts->supplies[1].supply = "vcc";
 121
 122         error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies),
 123                                         ts->supplies);
 124         if (error)
 125                 return error;
 126
 127         error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
 128         if (error)
 129                 return error;
 130
 131         msleep(ZET6223_POWER_ON_DELAY_MSEC);
 132
 133         error = devm_add_action_or_reset(dev, zet6223_power_off, ts);
 134         if (error) {
 135                 dev_err(dev, "failed to install poweroff action: %d\n", error);
 136                 return error;
 137         }
 138
 139         return 0;
 140 }
 141
 142 static int zet6223_query_device(struct zet6223_ts *ts)
 143 {
 144         u8 buf[ZET6223_CMD_INFO_LENGTH];
 145         u8 cmd = ZET6223_CMD_INFO;
 146         int ret;
 147         int error;
 148
 149         ret = i2c_master_send(ts->client, &cmd, sizeof(cmd));
 150         if (ret != sizeof(cmd)) {
 151                 error = ret < 0 ? ret : -EIO;
 152                 dev_err(&ts->client->dev,
 153                         "touchpanel info cmd failed: %d\n", error);
 154                 return error;
 155         }
 156
 157         ret = i2c_master_recv(ts->client, buf, sizeof(buf));
 158         if (ret != sizeof(buf)) {
 159                 error = ret < 0 ? ret : -EIO;
 160                 dev_err(&ts->client->dev,
 161                         "failed to retrieve touchpanel info: %d\n", error);
 162                 return error;
 163         }
 164
 165         ts->fingernum = buf[15] & 0x7F;
 166         if (ts->fingernum > ZET6223_MAX_FINGERS) {
 167                 dev_warn(&ts->client->dev,
 168                          "touchpanel reports %d fingers, limiting to %d\n",
 169                          ts->fingernum, ZET6223_MAX_FINGERS);
 170                 ts->fingernum = ZET6223_MAX_FINGERS;
 171         }
 172
 173         ts->max_x = get_unaligned_le16(&buf[8]);
 174         ts->max_y = get_unaligned_le16(&buf[10]);
 175
 176         return 0;
 177 }
 178
 179 static int zet6223_probe(struct i2c_client *client,
 180                          const struct i2c_device_id *id)
 181 {
 182         struct device *dev = &client->dev;
 183         struct zet6223_ts *ts;
 184         struct input_dev *input;
 185         int error;
 186
 187         if (!client->irq) {
 188                 dev_err(dev, "no irq specified\n");
 189                 return -EINVAL;
 190         }
 191
 192         ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
 193         if (!ts)
 194                 return -ENOMEM;
 195
 196         ts->client = client;
 197
 198         error = zet6223_power_on(ts);
 199         if (error)
 200                 return error;
 201
 202         error = zet6223_query_device(ts);
 203         if (error)
 204                 return error;
 205
 206         ts->input = input = devm_input_allocate_device(dev);
 207         if (!input)
 208                 return -ENOMEM;
 209
 210         input_set_drvdata(input, ts);
 211
 212         input->name = client->name;
 213         input->id.bustype = BUS_I2C;
 214         input->open = zet6223_start;
 215         input->close = zet6223_stop;
 216
 217         input_set_abs_params(input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
 218         input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
 219
 220         touchscreen_parse_properties(input, true, &ts->prop);
 221
 222         error = input_mt_init_slots(input, ts->fingernum,
 223                                     INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 224         if (error)
 225                 return error;
 226
 227         error = devm_request_threaded_irq(dev, client->irq, NULL, zet6223_irq,
 228                                           IRQF_ONESHOT, client->name, ts);
 229         if (error) {
 230                 dev_err(dev, "failed to request irq %d: %d\n",
 231                         client->irq, error);
 232                 return error;
 233         }
 234
 235         zet6223_stop(input);
 236
 237         error = input_register_device(input);
 238         if (error)
 239                 return error;
 240
 241         return 0;
 242 }
 243
 244 static const struct of_device_id zet6223_of_match[] = {
 245         { .compatible = "zeitec,zet6223" },
 246         { }
 247 };
 248 MODULE_DEVICE_TABLE(of, zet6223_of_match);
 249
 250 static const struct i2c_device_id zet6223_id[] = {
 251         { "zet6223", 0},
 252         { }
 253 };
 254 MODULE_DEVICE_TABLE(i2c, zet6223_id);
 255
 256 static struct i2c_driver zet6223_driver = {
 257         .driver = {
 258                 .name = "zet6223",
 259                 .of_match_table = zet6223_of_match,
 260         },
 261         .probe = zet6223_probe,
 262         .id_table = zet6223_id
 263 };
 264 module_i2c_driver(zet6223_driver);
 265
 266 MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
 267 MODULE_DESCRIPTION("ZEITEC zet622x I2C touchscreen driver");
 268 MODULE_LICENSE("GPL");