drivers/input/rmi4/rmi_f30.c

   1 /*
   2  * Copyright (c) 2012-2016 Synaptics Incorporated
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License version 2 as published by
   6  * the Free Software Foundation.
   7  */
   8
   9 #include <linux/kernel.h>
  10 #include <linux/rmi.h>
  11 #include <linux/input.h>
  12 #include <linux/slab.h>
  13 #include "rmi_driver.h"
  14
  15 #define RMI_F30_QUERY_SIZE                      2
  16
  17 /* Defs for Query 0 */
  18 #define RMI_F30_EXTENDED_PATTERNS               0x01
  19 #define RMI_F30_HAS_MAPPABLE_BUTTONS            BIT(1)
  20 #define RMI_F30_HAS_LED                         BIT(2)
  21 #define RMI_F30_HAS_GPIO                        BIT(3)
  22 #define RMI_F30_HAS_HAPTIC                      BIT(4)
  23 #define RMI_F30_HAS_GPIO_DRV_CTL                BIT(5)
  24 #define RMI_F30_HAS_MECH_MOUSE_BTNS             BIT(6)
  25
  26 /* Defs for Query 1 */
  27 #define RMI_F30_GPIO_LED_COUNT                  0x1F
  28
  29 /* Defs for Control Registers */
  30 #define RMI_F30_CTRL_1_GPIO_DEBOUNCE            0x01
  31 #define RMI_F30_CTRL_1_HALT                     BIT(4)
  32 #define RMI_F30_CTRL_1_HALTED                   BIT(5)
  33 #define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS     0x03
  34
  35 #define RMI_F30_CTRL_MAX_REGS           32
  36 #define RMI_F30_CTRL_MAX_BYTES          DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8)
  37 #define RMI_F30_CTRL_MAX_REG_BLOCKS     11
  38
  39 #define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES              \
  40                                         + 1                             \
  41                                         + RMI_F30_CTRL_MAX_BYTES        \
  42                                         + RMI_F30_CTRL_MAX_BYTES        \
  43                                         + RMI_F30_CTRL_MAX_BYTES        \
  44                                         + 6                             \
  45                                         + RMI_F30_CTRL_MAX_REGS         \
  46                                         + RMI_F30_CTRL_MAX_REGS         \
  47                                         + RMI_F30_CTRL_MAX_BYTES        \
  48                                         + 1                             \
  49                                         + 1)
  50
  51 #define TRACKSTICK_RANGE_START          3
  52 #define TRACKSTICK_RANGE_END            6
  53
  54 struct rmi_f30_ctrl_data {
  55         int address;
  56         int length;
  57         u8 *regs;
  58 };
  59
  60 struct f30_data {
  61         /* Query Data */
  62         bool has_extended_pattern;
  63         bool has_mappable_buttons;
  64         bool has_led;
  65         bool has_gpio;
  66         bool has_haptic;
  67         bool has_gpio_driver_control;
  68         bool has_mech_mouse_btns;
  69         u8 gpioled_count;
  70
  71         u8 register_count;
  72
  73         /* Control Register Data */
  74         struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS];
  75         u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE];
  76         u32 ctrl_regs_size;
  77
  78         u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
  79         u16 *gpioled_key_map;
  80
  81         struct input_dev *input;
  82
  83         struct rmi_function *f03;
  84         bool trackstick_buttons;
  85 };
  86
  87 static int rmi_f30_read_control_parameters(struct rmi_function *fn,
  88                                                 struct f30_data *f30)
  89 {
  90         int error;
  91
  92         error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
  93                                f30->ctrl_regs, f30->ctrl_regs_size);
  94         if (error) {
  95                 dev_err(&fn->dev,
  96                         "%s: Could not read control registers at 0x%x: %d\n",
  97                         __func__, fn->fd.control_base_addr, error);
  98                 return error;
  99         }
 100
 101         return 0;
 102 }
 103
 104 static void rmi_f30_report_button(struct rmi_function *fn,
 105                                   struct f30_data *f30, unsigned int button)
 106 {
 107         unsigned int reg_num = button >> 3;
 108         unsigned int bit_num = button & 0x07;
 109         u16 key_code = f30->gpioled_key_map[button];
 110         bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
 111
 112         if (f30->trackstick_buttons &&
 113             button >= TRACKSTICK_RANGE_START &&
 114             button <= TRACKSTICK_RANGE_END) {
 115                 rmi_f03_overwrite_button(f30->f03, key_code, key_down);
 116         } else {
 117                 rmi_dbg(RMI_DEBUG_FN, &fn->dev,
 118                         "%s: call input report key (0x%04x) value (0x%02x)",
 119                         __func__, key_code, key_down);
 120
 121                 input_report_key(f30->input, key_code, key_down);
 122         }
 123 }
 124
 125 static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 126 {
 127         struct f30_data *f30 = dev_get_drvdata(&fn->dev);
 128         struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
 129         int error;
 130         int i;
 131
 132         /* Read the gpi led data. */
 133         if (drvdata->attn_data.data) {
 134                 if (drvdata->attn_data.size < f30->register_count) {
 135                         dev_warn(&fn->dev,
 136                                  "F30 interrupted, but data is missing\n");
 137                         return 0;
 138                 }
 139                 memcpy(f30->data_regs, drvdata->attn_data.data,
 140                         f30->register_count);
 141                 drvdata->attn_data.data += f30->register_count;
 142                 drvdata->attn_data.size -= f30->register_count;
 143         } else {
 144                 error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
 145                                        f30->data_regs, f30->register_count);
 146                 if (error) {
 147                         dev_err(&fn->dev,
 148                                 "%s: Failed to read F30 data registers: %d\n",
 149                                 __func__, error);
 150                         return error;
 151                 }
 152         }
 153
 154         if (f30->has_gpio) {
 155                 for (i = 0; i < f30->gpioled_count; i++)
 156                         if (f30->gpioled_key_map[i] != KEY_RESERVED)
 157                                 rmi_f30_report_button(fn, f30, i);
 158                 if (f30->trackstick_buttons)
 159                         rmi_f03_commit_buttons(f30->f03);
 160         }
 161
 162         return 0;
 163 }
 164
 165 static int rmi_f30_config(struct rmi_function *fn)
 166 {
 167         struct f30_data *f30 = dev_get_drvdata(&fn->dev);
 168         struct rmi_driver *drv = fn->rmi_dev->driver;
 169         const struct rmi_device_platform_data *pdata =
 170                                 rmi_get_platform_data(fn->rmi_dev);
 171         int error;
 172
 173         /* can happen if f30_data.disable is set */
 174         if (!f30)
 175                 return 0;
 176
 177         if (pdata->f30_data.trackstick_buttons) {
 178                 /* Try [re-]establish link to F03. */
 179                 f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
 180                 f30->trackstick_buttons = f30->f03 != NULL;
 181         }
 182
 183         if (pdata->f30_data.disable) {
 184                 drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
 185         } else {
 186                 /* Write Control Register values back to device */
 187                 error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
 188                                         f30->ctrl_regs, f30->ctrl_regs_size);
 189                 if (error) {
 190                         dev_err(&fn->dev,
 191                                 "%s: Could not write control registers at 0x%x: %d\n",
 192                                 __func__, fn->fd.control_base_addr, error);
 193                         return error;
 194                 }
 195
 196                 drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
 197         }
 198
 199         return 0;
 200 }
 201
 202 static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
 203                                   int *ctrl_addr, int len, u8 **reg)
 204 {
 205         ctrl->address = *ctrl_addr;
 206         ctrl->length = len;
 207         ctrl->regs = *reg;
 208         *ctrl_addr += len;
 209         *reg += len;
 210 }
 211
 212 static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl)
 213 {
 214         int byte_position = button >> 3;
 215         int bit_position = button & 0x07;
 216
 217         /*
 218          * ctrl2 -> dir == 0 -> input mode
 219          * ctrl3 -> data == 1 -> actual button
 220          */
 221         return !(ctrl[2].regs[byte_position] & BIT(bit_position)) &&
 222                 (ctrl[3].regs[byte_position] & BIT(bit_position));
 223 }
 224
 225 static int rmi_f30_map_gpios(struct rmi_function *fn,
 226                              struct f30_data *f30)
 227 {
 228         const struct rmi_device_platform_data *pdata =
 229                                         rmi_get_platform_data(fn->rmi_dev);
 230         struct input_dev *input = f30->input;
 231         unsigned int button = BTN_LEFT;
 232         unsigned int trackstick_button = BTN_LEFT;
 233         bool button_mapped = false;
 234         int i;
 235         int button_count = min_t(u8, f30->gpioled_count, TRACKSTICK_RANGE_END);
 236
 237         f30->gpioled_key_map = devm_kcalloc(&fn->dev,
 238                                             button_count,
 239                                             sizeof(f30->gpioled_key_map[0]),
 240                                             GFP_KERNEL);
 241         if (!f30->gpioled_key_map) {
 242                 dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
 243                 return -ENOMEM;
 244         }
 245
 246         for (i = 0; i < button_count; i++) {
 247                 if (!rmi_f30_is_valid_button(i, f30->ctrl))
 248                         continue;
 249
 250                 if (pdata->f30_data.trackstick_buttons &&
 251                     i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
 252                         f30->gpioled_key_map[i] = trackstick_button++;
 253                 } else if (!pdata->f30_data.buttonpad || !button_mapped) {
 254                         f30->gpioled_key_map[i] = button;
 255                         input_set_capability(input, EV_KEY, button++);
 256                         button_mapped = true;
 257                 }
 258         }
 259
 260         input->keycode = f30->gpioled_key_map;
 261         input->keycodesize = sizeof(f30->gpioled_key_map[0]);
 262         input->keycodemax = f30->gpioled_count;
 263
 264         /*
 265          * Buttonpad could be also inferred from f30->has_mech_mouse_btns,
 266          * but I am not sure, so use only the pdata info and the number of
 267          * mapped buttons.
 268          */
 269         if (pdata->f30_data.buttonpad || (button - BTN_LEFT == 1))
 270                 __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 271
 272         return 0;
 273 }
 274
 275 static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30)
 276 {
 277         u8 *ctrl_reg = f30->ctrl_regs;
 278         int control_address = fn->fd.control_base_addr;
 279         u8 buf[RMI_F30_QUERY_SIZE];
 280         int error;
 281
 282         error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
 283                                buf, RMI_F30_QUERY_SIZE);
 284         if (error) {
 285                 dev_err(&fn->dev, "Failed to read query register\n");
 286                 return error;
 287         }
 288
 289         f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
 290         f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
 291         f30->has_led = buf[0] & RMI_F30_HAS_LED;
 292         f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
 293         f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
 294         f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
 295         f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
 296         f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
 297
 298         f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8);
 299
 300         if (f30->has_gpio && f30->has_led)
 301                 rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
 302                                       f30->register_count, &ctrl_reg);
 303
 304         rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address,
 305                               sizeof(u8), &ctrl_reg);
 306
 307         if (f30->has_gpio) {
 308                 rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
 309                                       f30->register_count, &ctrl_reg);
 310
 311                 rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
 312                                       f30->register_count, &ctrl_reg);
 313         }
 314
 315         if (f30->has_led) {
 316                 rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
 317                                       f30->register_count, &ctrl_reg);
 318
 319                 rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
 320                                       f30->has_extended_pattern ? 6 : 2,
 321                                       &ctrl_reg);
 322         }
 323
 324         if (f30->has_led || f30->has_gpio_driver_control) {
 325                 /* control 6 uses a byte per gpio/led */
 326                 rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
 327                                       f30->gpioled_count, &ctrl_reg);
 328         }
 329
 330         if (f30->has_mappable_buttons) {
 331                 /* control 7 uses a byte per gpio/led */
 332                 rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
 333                                       f30->gpioled_count, &ctrl_reg);
 334         }
 335
 336         if (f30->has_haptic) {
 337                 rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
 338                                       f30->register_count, &ctrl_reg);
 339
 340                 rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
 341                                       sizeof(u8), &ctrl_reg);
 342         }
 343
 344         if (f30->has_mech_mouse_btns)
 345                 rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
 346                                       sizeof(u8), &ctrl_reg);
 347
 348         f30->ctrl_regs_size = ctrl_reg -
 349                                 f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE;
 350
 351         error = rmi_f30_read_control_parameters(fn, f30);
 352         if (error) {
 353                 dev_err(&fn->dev,
 354                         "Failed to initialize F30 control params: %d\n",
 355                         error);
 356                 return error;
 357         }
 358
 359         if (f30->has_gpio) {
 360                 error = rmi_f30_map_gpios(fn, f30);
 361                 if (error)
 362                         return error;
 363         }
 364
 365         return 0;
 366 }
 367
 368 static int rmi_f30_probe(struct rmi_function *fn)
 369 {
 370         struct rmi_device *rmi_dev = fn->rmi_dev;
 371         const struct rmi_device_platform_data *pdata =
 372                                         rmi_get_platform_data(rmi_dev);
 373         struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
 374         struct f30_data *f30;
 375         int error;
 376
 377         if (pdata->f30_data.disable)
 378                 return 0;
 379
 380         if (!drv_data->input) {
 381                 dev_info(&fn->dev, "F30: no input device found, ignoring\n");
 382                 return -ENXIO;
 383         }
 384
 385         f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL);
 386         if (!f30)
 387                 return -ENOMEM;
 388
 389         f30->input = drv_data->input;
 390
 391         error = rmi_f30_initialize(fn, f30);
 392         if (error)
 393                 return error;
 394
 395         dev_set_drvdata(&fn->dev, f30);
 396         return 0;
 397 }
 398
 399 struct rmi_function_handler rmi_f30_handler = {
 400         .driver = {
 401                 .name = "rmi4_f30",
 402         },
 403         .func = 0x30,
 404         .probe = rmi_f30_probe,
 405         .config = rmi_f30_config,
 406         .attention = rmi_f30_attention,
 407 };