drivers/ide/pci/sgiioc4.c

   1 /*
   2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of version 2 of the GNU General Public License
   6  * as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it would be useful, but
   9  * WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  11  *
  12  * You should have received a copy of the GNU General Public
  13  * License along with this program; if not, write the Free Software
  14  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  15  *
  16  * For further information regarding this notice, see:
  17  *
  18  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/types.h>
  23 #include <linux/pci.h>
  24 #include <linux/delay.h>
  25 #include <linux/hdreg.h>
  26 #include <linux/init.h>
  27 #include <linux/kernel.h>
  28 #include <linux/timer.h>
  29 #include <linux/mm.h>
  30 #include <linux/ioport.h>
  31 #include <linux/blkdev.h>
  32 #include <linux/ioc4.h>
  33 #include <asm/io.h>
  34
  35 #include <linux/ide.h>
  36
  37 /* IOC4 Specific Definitions */
  38 #define IOC4_CMD_OFFSET         0x100
  39 #define IOC4_CTRL_OFFSET        0x120
  40 #define IOC4_DMA_OFFSET         0x140
  41 #define IOC4_INTR_OFFSET        0x0
  42
  43 #define IOC4_TIMING             0x00
  44 #define IOC4_DMA_PTR_L          0x01
  45 #define IOC4_DMA_PTR_H          0x02
  46 #define IOC4_DMA_ADDR_L         0x03
  47 #define IOC4_DMA_ADDR_H         0x04
  48 #define IOC4_BC_DEV             0x05
  49 #define IOC4_BC_MEM             0x06
  50 #define IOC4_DMA_CTRL           0x07
  51 #define IOC4_DMA_END_ADDR       0x08
  52
  53 /* Bits in the IOC4 Control/Status Register */
  54 #define IOC4_S_DMA_START        0x01
  55 #define IOC4_S_DMA_STOP         0x02
  56 #define IOC4_S_DMA_DIR          0x04
  57 #define IOC4_S_DMA_ACTIVE       0x08
  58 #define IOC4_S_DMA_ERROR        0x10
  59 #define IOC4_ATA_MEMERR         0x02
  60
  61 /* Read/Write Directions */
  62 #define IOC4_DMA_WRITE          0x04
  63 #define IOC4_DMA_READ           0x00
  64
  65 /* Interrupt Register Offsets */
  66 #define IOC4_INTR_REG           0x03
  67 #define IOC4_INTR_SET           0x05
  68 #define IOC4_INTR_CLEAR         0x07
  69
  70 #define IOC4_IDE_CACHELINE_SIZE 128
  71 #define IOC4_CMD_CTL_BLK_SIZE   0x20
  72 #define IOC4_SUPPORTED_FIRMWARE_REV 46
  73
  74 typedef struct {
  75         u32 timing_reg0;
  76         u32 timing_reg1;
  77         u32 low_mem_ptr;
  78         u32 high_mem_ptr;
  79         u32 low_mem_addr;
  80         u32 high_mem_addr;
  81         u32 dev_byte_count;
  82         u32 mem_byte_count;
  83         u32 status;
  84 } ioc4_dma_regs_t;
  85
  86 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
  87 /* IOC4 has only 1 IDE channel */
  88 #define IOC4_PRD_BYTES       16
  89 #define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
  90
  91
  92 static void
  93 sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
  94                         unsigned long ctrl_port, unsigned long irq_port)
  95 {
  96         unsigned long reg = data_port;
  97         int i;
  98
  99         /* Registers are word (32 bit) aligned */
 100         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
 101                 hw->io_ports[i] = reg + i * 4;
 102
 103         if (ctrl_port)
 104                 hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
 105
 106         if (irq_port)
 107                 hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
 108 }
 109
 110 static void
 111 sgiioc4_maskproc(ide_drive_t * drive, int mask)
 112 {
 113         writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
 114                (void __iomem *)IDE_CONTROL_REG);
 115 }
 116
 117
 118 static int
 119 sgiioc4_checkirq(ide_hwif_t * hwif)
 120 {
 121         unsigned long intr_addr =
 122                 hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4;
 123
 124         if ((u8)readl((void __iomem *)intr_addr) & 0x03)
 125                 return 1;
 126
 127         return 0;
 128 }
 129
 130 static u8 sgiioc4_INB(unsigned long);
 131
 132 static int
 133 sgiioc4_clearirq(ide_drive_t * drive)
 134 {
 135         u32 intr_reg;
 136         ide_hwif_t *hwif = HWIF(drive);
 137         unsigned long other_ir =
 138             hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2);
 139
 140         /* Code to check for PCI error conditions */
 141         intr_reg = readl((void __iomem *)other_ir);
 142         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 143                 /*
 144                  * Using sgiioc4_INB to read the IDE_STATUS_REG has a side effect
 145                  * of clearing the interrupt.  The first read should clear it
 146                  * if it is set.  The second read should return a "clear" status
 147                  * if it got cleared.  If not, then spin for a bit trying to
 148                  * clear it.
 149                  */
 150                 u8 stat = sgiioc4_INB(IDE_STATUS_REG);
 151                 int count = 0;
 152                 stat = sgiioc4_INB(IDE_STATUS_REG);
 153                 while ((stat & 0x80) && (count++ < 100)) {
 154                         udelay(1);
 155                         stat = sgiioc4_INB(IDE_STATUS_REG);
 156                 }
 157
 158                 if (intr_reg & 0x02) {
 159                         /* Error when transferring DMA data on PCI bus */
 160                         u32 pci_err_addr_low, pci_err_addr_high,
 161                             pci_stat_cmd_reg;
 162
 163                         pci_err_addr_low =
 164                                 readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
 165                         pci_err_addr_high =
 166                                 readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
 167                         pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
 168                                               &pci_stat_cmd_reg);
 169                         printk(KERN_ERR
 170                                "%s(%s) : PCI Bus Error when doing DMA:"
 171                                    " status-cmd reg is 0x%x\n",
 172                                __FUNCTION__, drive->name, pci_stat_cmd_reg);
 173                         printk(KERN_ERR
 174                                "%s(%s) : PCI Error Address is 0x%x%x\n",
 175                                __FUNCTION__, drive->name,
 176                                pci_err_addr_high, pci_err_addr_low);
 177                         /* Clear the PCI Error indicator */
 178                         pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
 179                                                0x00000146);
 180                 }
 181
 182                 /* Clear the Interrupt, Error bits on the IOC4 */
 183                 writel(0x03, (void __iomem *)other_ir);
 184
 185                 intr_reg = readl((void __iomem *)other_ir);
 186         }
 187
 188         return intr_reg & 3;
 189 }
 190
 191 static void sgiioc4_ide_dma_start(ide_drive_t * drive)
 192 {
 193         ide_hwif_t *hwif = HWIF(drive);
 194         unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
 195         unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
 196         unsigned int temp_reg = reg | IOC4_S_DMA_START;
 197
 198         writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 199 }
 200
 201 static u32
 202 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 203 {
 204         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 205         u32     ioc4_dma;
 206         int     count;
 207
 208         count = 0;
 209         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 210         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
 211                 udelay(1);
 212                 ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 213         }
 214         return ioc4_dma;
 215 }
 216
 217 /* Stops the IOC4 DMA Engine */
 218 static int
 219 sgiioc4_ide_dma_end(ide_drive_t * drive)
 220 {
 221         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
 222         ide_hwif_t *hwif = HWIF(drive);
 223         unsigned long dma_base = hwif->dma_base;
 224         int dma_stat = 0;
 225         unsigned long *ending_dma = ide_get_hwifdata(hwif);
 226
 227         writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
 228
 229         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 230
 231         if (ioc4_dma & IOC4_S_DMA_STOP) {
 232                 printk(KERN_ERR
 233                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
 234                        "ioc4_dma_reg 0x%x\n",
 235                        __FUNCTION__, drive->name, ioc4_dma);
 236                 dma_stat = 1;
 237         }
 238
 239         /*
 240          * The IOC4 will DMA 1's to the ending dma area to indicate that
 241          * previous data DMA is complete.  This is necessary because of relaxed
 242          * ordering between register reads and DMA writes on the Altix.
 243          */
 244         while ((cnt++ < 200) && (!valid)) {
 245                 for (num = 0; num < 16; num++) {
 246                         if (ending_dma[num]) {
 247                                 valid = 1;
 248                                 break;
 249                         }
 250                 }
 251                 udelay(1);
 252         }
 253         if (!valid) {
 254                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__,
 255                        drive->name);
 256                 dma_stat = 1;
 257         }
 258
 259         bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
 260         bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
 261
 262         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
 263                 if (bc_dev > bc_mem + 8) {
 264                         printk(KERN_ERR
 265                                "%s(%s): WARNING!! byte_count_dev %d "
 266                                "!= byte_count_mem %d\n",
 267                                __FUNCTION__, drive->name, bc_dev, bc_mem);
 268                 }
 269         }
 270
 271         drive->waiting_for_dma = 0;
 272         ide_destroy_dmatable(drive);
 273
 274         return dma_stat;
 275 }
 276
 277 static int
 278 sgiioc4_ide_dma_on(ide_drive_t * drive)
 279 {
 280         drive->using_dma = 1;
 281
 282         return 0;
 283 }
 284
 285 static void sgiioc4_dma_off_quietly(ide_drive_t *drive)
 286 {
 287         drive->using_dma = 0;
 288
 289         drive->hwif->dma_host_off(drive);
 290 }
 291
 292 static int sgiioc4_ide_dma_check(ide_drive_t *drive)
 293 {
 294         /* FIXME: check for available DMA modes */
 295         if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
 296                 printk(KERN_WARNING "%s: couldn't set MWDMA2 mode, "
 297                                     "using PIO instead\n", drive->name);
 298                 return -1;
 299         } else
 300                 return 0;
 301 }
 302
 303 /* returns 1 if dma irq issued, 0 otherwise */
 304 static int
 305 sgiioc4_ide_dma_test_irq(ide_drive_t * drive)
 306 {
 307         return sgiioc4_checkirq(HWIF(drive));
 308 }
 309
 310 static void sgiioc4_dma_host_on(ide_drive_t * drive)
 311 {
 312 }
 313
 314 static void sgiioc4_dma_host_off(ide_drive_t * drive)
 315 {
 316         sgiioc4_clearirq(drive);
 317 }
 318
 319 static void
 320 sgiioc4_resetproc(ide_drive_t * drive)
 321 {
 322         sgiioc4_ide_dma_end(drive);
 323         sgiioc4_clearirq(drive);
 324 }
 325
 326 static void
 327 sgiioc4_dma_lost_irq(ide_drive_t * drive)
 328 {
 329         sgiioc4_resetproc(drive);
 330
 331         ide_dma_lost_irq(drive);
 332 }
 333
 334 static u8
 335 sgiioc4_INB(unsigned long port)
 336 {
 337         u8 reg = (u8) readb((void __iomem *) port);
 338
 339         if ((port & 0xFFF) == 0x11C) {  /* Status register of IOC4 */
 340                 if (reg & 0x51) {       /* Not busy...check for interrupt */
 341                         unsigned long other_ir = port - 0x110;
 342                         unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 343
 344                         /* Clear the Interrupt, Error bits on the IOC4 */
 345                         if (intr_reg & 0x03) {
 346                                 writel(0x03, (void __iomem *) other_ir);
 347                                 intr_reg = (u32) readl((void __iomem *) other_ir);
 348                         }
 349                 }
 350         }
 351
 352         return reg;
 353 }
 354
 355 /* Creates a dma map for the scatter-gather list entries */
 356 static void __devinit
 357 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 358 {
 359         void __iomem *virt_dma_base;
 360         int num_ports = sizeof (ioc4_dma_regs_t);
 361         void *pad;
 362
 363         printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 364                dma_base, dma_base + num_ports - 1);
 365
 366         if (!request_mem_region(dma_base, num_ports, hwif->name)) {
 367                 printk(KERN_ERR
 368                        "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
 369                        "ALREADY in use\n",
 370                        __FUNCTION__, hwif->name, (void *) dma_base,
 371                        (void *) dma_base + num_ports - 1);
 372                 goto dma_alloc_failure;
 373         }
 374
 375         virt_dma_base = ioremap(dma_base, num_ports);
 376         if (virt_dma_base == NULL) {
 377                 printk(KERN_ERR
 378                        "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
 379                        __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
 380                 goto dma_remap_failure;
 381         }
 382         hwif->dma_base = (unsigned long) virt_dma_base;
 383
 384         hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
 385                                           IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 386                                           &hwif->dmatable_dma);
 387
 388         if (!hwif->dmatable_cpu)
 389                 goto dma_pci_alloc_failure;
 390
 391         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 392
 393         pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE,
 394                                    (dma_addr_t *) &(hwif->dma_status));
 395
 396         if (pad) {
 397                 ide_set_hwifdata(hwif, pad);
 398                 return;
 399         }
 400
 401         pci_free_consistent(hwif->pci_dev,
 402                             IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 403                             hwif->dmatable_cpu, hwif->dmatable_dma);
 404         printk(KERN_INFO
 405                "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
 406                __FUNCTION__, hwif->name);
 407         printk(KERN_INFO
 408                "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 409
 410 dma_pci_alloc_failure:
 411         iounmap(virt_dma_base);
 412
 413 dma_remap_failure:
 414         release_mem_region(dma_base, num_ports);
 415
 416 dma_alloc_failure:
 417         /* Disable DMA because we couldnot allocate any DMA maps */
 418         hwif->autodma = 0;
 419         hwif->atapi_dma = 0;
 420 }
 421
 422 /* Initializes the IOC4 DMA Engine */
 423 static void
 424 sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 425 {
 426         u32 ioc4_dma;
 427         ide_hwif_t *hwif = HWIF(drive);
 428         unsigned long dma_base = hwif->dma_base;
 429         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 430         u32 dma_addr, ending_dma_addr;
 431
 432         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 433
 434         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
 435                 printk(KERN_WARNING
 436                         "%s(%s):Warning!! DMA from previous transfer was still active\n",
 437                        __FUNCTION__, drive->name);
 438                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 439                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 440
 441                 if (ioc4_dma & IOC4_S_DMA_STOP)
 442                         printk(KERN_ERR
 443                                "%s(%s) : IOC4 Dma STOP bit is still 1\n",
 444                                __FUNCTION__, drive->name);
 445         }
 446
 447         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 448         if (ioc4_dma & IOC4_S_DMA_ERROR) {
 449                 printk(KERN_WARNING
 450                        "%s(%s) : Warning!! - DMA Error during Previous"
 451                        " transfer | status 0x%x\n",
 452                        __FUNCTION__, drive->name, ioc4_dma);
 453                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 454                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 455
 456                 if (ioc4_dma & IOC4_S_DMA_STOP)
 457                         printk(KERN_ERR
 458                                "%s(%s) : IOC4 DMA STOP bit is still 1\n",
 459                                __FUNCTION__, drive->name);
 460         }
 461
 462         /* Address of the Scatter Gather List */
 463         dma_addr = cpu_to_le32(hwif->dmatable_dma);
 464         writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
 465
 466         /* Address of the Ending DMA */
 467         memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 468         ending_dma_addr = cpu_to_le32(hwif->dma_status);
 469         writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
 470
 471         writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 472         drive->waiting_for_dma = 1;
 473 }
 474
 475 /* IOC4 Scatter Gather list Format                                       */
 476 /* 128 Bit entries to support 64 bit addresses in the future             */
 477 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
 478 /* --------------------------------------------------------------------- */
 479 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
 480 /* --------------------------------------------------------------------- */
 481 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
 482 /* --------------------------------------------------------------------- */
 483 /* Creates the scatter gather list, DMA Table */
 484 static unsigned int
 485 sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
 486 {
 487         ide_hwif_t *hwif = HWIF(drive);
 488         unsigned int *table = hwif->dmatable_cpu;
 489         unsigned int count = 0, i = 1;
 490         struct scatterlist *sg;
 491
 492         hwif->sg_nents = i = ide_build_sglist(drive, rq);
 493
 494         if (!i)
 495                 return 0;       /* sglist of length Zero */
 496
 497         sg = hwif->sg_table;
 498         while (i && sg_dma_len(sg)) {
 499                 dma_addr_t cur_addr;
 500                 int cur_len;
 501                 cur_addr = sg_dma_address(sg);
 502                 cur_len = sg_dma_len(sg);
 503
 504                 while (cur_len) {
 505                         if (count++ >= IOC4_PRD_ENTRIES) {
 506                                 printk(KERN_WARNING
 507                                        "%s: DMA table too small\n",
 508                                        drive->name);
 509                                 goto use_pio_instead;
 510                         } else {
 511                                 u32 bcount =
 512                                     0x10000 - (cur_addr & 0xffff);
 513
 514                                 if (bcount > cur_len)
 515                                         bcount = cur_len;
 516
 517                                 /* put the addr, length in
 518                                  * the IOC4 dma-table format */
 519                                 *table = 0x0;
 520                                 table++;
 521                                 *table = cpu_to_be32(cur_addr);
 522                                 table++;
 523                                 *table = 0x0;
 524                                 table++;
 525
 526                                 *table = cpu_to_be32(bcount);
 527                                 table++;
 528
 529                                 cur_addr += bcount;
 530                                 cur_len -= bcount;
 531                         }
 532                 }
 533
 534                 sg++;
 535                 i--;
 536         }
 537
 538         if (count) {
 539                 table--;
 540                 *table |= cpu_to_be32(0x80000000);
 541                 return count;
 542         }
 543
 544 use_pio_instead:
 545         pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
 546                      hwif->sg_dma_direction);
 547
 548         return 0;               /* revert to PIO for this request */
 549 }
 550
 551 static int sgiioc4_ide_dma_setup(ide_drive_t *drive)
 552 {
 553         struct request *rq = HWGROUP(drive)->rq;
 554         unsigned int count = 0;
 555         int ddir;
 556
 557         if (rq_data_dir(rq))
 558                 ddir = PCI_DMA_TODEVICE;
 559         else
 560                 ddir = PCI_DMA_FROMDEVICE;
 561
 562         if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
 563                 /* try PIO instead of DMA */
 564                 ide_map_sg(drive, rq);
 565                 return 1;
 566         }
 567
 568         if (rq_data_dir(rq))
 569                 /* Writes TO the IOC4 FROM Main Memory */
 570                 ddir = IOC4_DMA_READ;
 571         else
 572                 /* Writes FROM the IOC4 TO Main Memory */
 573                 ddir = IOC4_DMA_WRITE;
 574
 575         sgiioc4_configure_for_dma(ddir, drive);
 576
 577         return 0;
 578 }
 579
 580 static void __devinit
 581 ide_init_sgiioc4(ide_hwif_t * hwif)
 582 {
 583         hwif->mmio = 1;
 584         hwif->autodma = 1;
 585         hwif->atapi_dma = 1;
 586         hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
 587         hwif->mwdma_mask = 0x2; /* Multimode-2 DMA  */
 588         hwif->swdma_mask = 0x2;
 589         hwif->tuneproc = NULL;  /* Sets timing for PIO mode */
 590         hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
 591         hwif->selectproc = NULL;/* Use the default routine to select drive */
 592         hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
 593         hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
 594         hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
 595                                                 clear interrupts */
 596         hwif->intrproc = NULL;  /* Enable or Disable interrupt from drive */
 597         hwif->maskproc = &sgiioc4_maskproc;     /* Mask on/off NIEN register */
 598         hwif->quirkproc = NULL;
 599         hwif->busproc = NULL;
 600
 601         hwif->dma_setup = &sgiioc4_ide_dma_setup;
 602         hwif->dma_start = &sgiioc4_ide_dma_start;
 603         hwif->ide_dma_end = &sgiioc4_ide_dma_end;
 604         hwif->ide_dma_check = &sgiioc4_ide_dma_check;
 605         hwif->ide_dma_on = &sgiioc4_ide_dma_on;
 606         hwif->dma_off_quietly = &sgiioc4_dma_off_quietly;
 607         hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
 608         hwif->dma_host_on = &sgiioc4_dma_host_on;
 609         hwif->dma_host_off = &sgiioc4_dma_host_off;
 610         hwif->dma_lost_irq = &sgiioc4_dma_lost_irq;
 611         hwif->dma_timeout = &ide_dma_timeout;
 612
 613         hwif->INB = &sgiioc4_INB;
 614 }
 615
 616 static int __devinit
 617 sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 618 {
 619         unsigned long cmd_base, dma_base, irqport;
 620         unsigned long bar0, cmd_phys_base, ctl;
 621         void __iomem *virt_base;
 622         ide_hwif_t *hwif;
 623         int h;
 624
 625         /*
 626          * Find an empty HWIF; if none available, return -ENOMEM.
 627          */
 628         for (h = 0; h < MAX_HWIFS; ++h) {
 629                 hwif = &ide_hwifs[h];
 630                 if (hwif->chipset == ide_unknown)
 631                         break;
 632         }
 633         if (h == MAX_HWIFS) {
 634                 printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name);
 635                 return -ENOMEM;
 636         }
 637
 638         /*  Get the CmdBlk and CtrlBlk Base Registers */
 639         bar0 = pci_resource_start(dev, 0);
 640         virt_base = ioremap(bar0, pci_resource_len(dev, 0));
 641         if (virt_base == NULL) {
 642                 printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 643                         d->name, bar0);
 644                 return -ENOMEM;
 645         }
 646         cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
 647         ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
 648         irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
 649         dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 650
 651         cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 652         if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 653             hwif->name)) {
 654                 printk(KERN_ERR
 655                         "%s : %s -- ERROR, Addresses "
 656                         "0x%p to 0x%p ALREADY in use\n",
 657                        __FUNCTION__, hwif->name, (void *) cmd_phys_base,
 658                        (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 659                 return -ENOMEM;
 660         }
 661
 662         if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
 663                 /* Initialize the IO registers */
 664                 sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
 665                 memcpy(hwif->io_ports, hwif->hw.io_ports,
 666                        sizeof (hwif->io_ports));
 667                 hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
 668         }
 669
 670         hwif->irq = dev->irq;
 671         hwif->chipset = ide_pci;
 672         hwif->pci_dev = dev;
 673         hwif->channel = 0;      /* Single Channel chip */
 674         hwif->cds = (struct ide_pci_device_s *) d;
 675         hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
 676
 677         /* The IOC4 uses MMIO rather than Port IO. */
 678         default_hwif_mmiops(hwif);
 679
 680         /* Initializing chipset IRQ Registers */
 681         writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 682
 683         ide_init_sgiioc4(hwif);
 684
 685         if (dma_base)
 686                 ide_dma_sgiioc4(hwif, dma_base);
 687         else
 688                 printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
 689                        hwif->name, d->name);
 690
 691         if (probe_hwif_init(hwif))
 692                 return -EIO;
 693
 694         /* Create /proc/ide entries */
 695         ide_proc_register_port(hwif);
 696
 697         return 0;
 698 }
 699
 700 static unsigned int __devinit
 701 pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
 702 {
 703         unsigned int class_rev;
 704         int ret;
 705
 706         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 707         class_rev &= 0xff;
 708         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
 709                         d->name, pci_name(dev), class_rev);
 710         if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) {
 711                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
 712                         "firmware is obsolete - please upgrade to revision"
 713                         "46 or higher\n", d->name, pci_name(dev));
 714                 ret = -EAGAIN;
 715                 goto out;
 716         }
 717         ret = sgiioc4_ide_setup_pci_device(dev, d);
 718 out:
 719         return ret;
 720 }
 721
 722 static ide_pci_device_t sgiioc4_chipset __devinitdata = {
 723          /* Channel 0 */
 724          .name = "SGIIOC4",
 725          .init_hwif = ide_init_sgiioc4,
 726          .init_dma = ide_dma_sgiioc4,
 727          .channels = 1,
 728          .autodma = AUTODMA,
 729          /* SGI IOC4 doesn't have enablebits. */
 730          .bootable = ON_BOARD,
 731 };
 732
 733 int
 734 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 735 {
 736         /* PCI-RT does not bring out IDE connection.
 737          * Do not attach to this particular IOC4.
 738          */
 739         if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
 740                 return 0;
 741
 742         return pci_init_sgiioc4(idd->idd_pdev, &sgiioc4_chipset);
 743 }
 744
 745 static struct ioc4_submodule ioc4_ide_submodule = {
 746         .is_name = "IOC4_ide",
 747         .is_owner = THIS_MODULE,
 748         .is_probe = ioc4_ide_attach_one,
 749 /*      .is_remove = ioc4_ide_remove_one,       */
 750 };
 751
 752 static int __init ioc4_ide_init(void)
 753 {
 754         return ioc4_register_submodule(&ioc4_ide_submodule);
 755 }
 756
 757 late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
 758
 759 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 760 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 761 MODULE_LICENSE("GPL");